DGFT Committee Minutes

DIRECTORATE GENERAL OF FOREIGN TRADE (DES‐II SECT10N) RATIFIED MINUTES OF THE NORMS COMMITTEE‐ II MEETING NO.01/81 DATED 15.05.2018 0F ACTUALLY HELD ON 14。 06.2018 Plcasc Notc (i) For info.11latiOn of exporters,NollllS COllunittee― H handles all cases pertaining to flxation/ratiflcation of nolllls fOr Export Products falling llnder ITC(HS)Chapter 72 to 76,78 to 80,85.Communications in respcct of cases/pcrtaining to NC― II may be sentto cmail address:nc2.dttftのnicoin (ii) In ccrtain cases the decision of the Norms Commi■ee refers to thc Recommendations/ ObseⅣations/Dcflciencies received from the concemed Tcchnical Authorityo Wherever applicable,a scanned copy of such document has been placed atthe end oftheヽ 4inutes, in rllnning serial orders. The concemed fl」 ぼノcompany may go through the same and rcspond accordingly. (iii) Similarly,a scanncd copy of thc blank Standard Deflcicncy Fo■ 1■lat,Which may ind a reference in NC)decisions,has also been attached in the end.This rnay also bc refelTed to by the concemcd fl詢肛ノcompany and inay be rcsponded accordingly. (iV) ThC NollllS COrrmitec has taken decision only with respect to technical aspect/wastage norlns. While redeellning the applications, RAs should check that the applicant has fulillcd all requlrcments as prcscribed in policy/procedurc including those in Policy Circulars No.50/2009-2014(RE 2010)dated 28th December,20H,Policy Circular No.14(RE…2012/2009-14, dated 4th February, 2013 and O.M. No. 01/92/180/Misc./AM。13/PC― V1/10 dated 15.04。2014 or any other provisions under FTP/HBP for EODC. Thc Meeting No.01/81 dated 15.05.2018 ofNo.11lS COlllmittee‐ II for the year 2018-19 was actually hcld on 13.06.2018 undcr the Chaillllanship of Shri S.B.So Reddy, Additional E)irector Gcneral of Forcign Tradc to consider thc following applications for ratiflcation of norms in respcct of advance authorizations under Duty Excmption Scheme(Chaptcr-4)of Forcign Tradc Policy 2015-20.The fbllowing inembers wcre presentin thc rneeting:― Sl.No. Name & Designation Department 1 Shri K.K.Tewari,IA DHI 2. ShriS.K. Bhatnagar, Dy.IA NIIoS 3. Shri Shcsh Kunlar,Consultant DGFT 4. Shri Kirti Vardhan,DDG DGFT 5. Shri Vinod Kumar Kashyap,FTDO DGFT

Casc No.:2/11/81-ALC2/2011 ⅣIEETING NUMBER :1/81-ALC2/2018 MEETING DATE:15.05.2018 P冨りName:DELTA POWER IMeet No/Date:1/81‐ SOLUTIONS INDIA PVT.LTD.:ALC2/2018 Lic.No/Date:2510003250 1DeferDate: 25.05.2011 Decision : NC observed that reply of the firm in the above case was referred to MeitY for on12.06.2015. NC decided send a reminder to MeitY to expedite their comments defer the case. case stands deferred to 10.07.2018 Mcet No/Dat〕:1/81¨ ALC2/2018 15.05.2018 獅 : NC observed that application for the above AA was referred to MSME for and as per Committee decision copy of the application was forwarded to IPP(Chemical Division). NC decided to await their comments and defer the case. case stands defelTed to 10.07.2018. tus: ALC2/2018 15.05.2018 Deferred RLA File :09/24/040/00640/AM13/ Lた。No/DateЮ 910055685 :Detr Dttα ion : NC observed that reply of the firm in the above case was referred to MeitY for on 12.05.2015. NC decided send a reminder to MeitY to expedite their comments defer the case. case stands deferred to 10.07.2018.

Case No.:57/10ノ81-ALC2/2014 1PttName:HINDALCO

INDUSTRIES LIMITED ALC2/2018 15.05.2018 Decision : NC observed that application for the above AA was referred to Min. of Mines for ts on 05.08.2015. It was observed that party is importing Black copper 10000 MT copper content is stated as 9500 MT. Committee felt that material breakup of remaining MT should also be known to committee to ascertain value of bi products etc. NC decided status: Deferred 4田量 L.0/0031,製ψ 概職叩唖・岬lγ 窯圏ビ:TTTOT需.肌 : Case No.:`/21/81‐ ALC2/2016 P額りName:FRICTION METAL FIBRES(INDIA)P.LTD Defer Date: 10.07.2018 Case No。:8ノ10/81‐ALC2/2014 ITECHNOLOGIES PVT LTD. :01/81/050/00265/AM15/ Meet No/Date:1/81‐ 2 10.07.2018 Name:VEM 10.07.2018

anddeferthicase・ | 1器Llt柵歯獄∬棚麗出Ihms

Case No.:32/10/81-ALC2/2014

Party Name:DELPHI RLA File :10/24/040/00032/AM15/ Mcet No/Date:1/81- ALC2/2018 15,05.2018 Lic.No/Date:1010058625 14.07.2014 Meet No/Date:1/81- ALC2/2018 15.05.2018 Status: ferred Approved 10.07.2018 Decision : NC considered the agenda alongwith relevant record and decided to forward the lication to Technical officer (Shri Shesh Kumar, Consultant, DGFT) to examine the case. case stands dcfelTed to 10.07.2018. Mcct No/Date:1/81‐ ALC2/2018 15.05.2018 lRLA File l:02/24/040/00090/AM15/ Date: 10.07.2018 Decision : NC observed that application for ther above AA was referred to MNRE for inspite of reminder. NC decided to await and noted that no comments received ir commcnts and dcfcr thc case. 13aSe im 鍵騰欝鰹撫桑 | CONNECTION SYSTEMS INDIA LIMITED, :01/81/050/00289/AM15/ ICaseNo.:25/13/81¨ ALC2/2014 P霞りName:JUPITER SOLAR POWER LIMITED Lic.No/Date:0210204856 :01/81/050/00441/AM15/ 25.08.2014 7

Case No.:23lll8l-ALc2l20l5 iParty Name:AMARTARA PVT. jMeet No/Date:t/81- -Fpp-*d -

lLrD. lp.tcznorc I -- I lii.os.zor s I ffiffiffi :01/81/050/00023/AMt6/ l:$/94t040/0o977tANfis/ lZO.Or.ZOtS I D;'.t.'rrrrCffi decided to ratify the norms for the above advance authorization allowing the wastgi of 2yo as under : Ｓ ． Ｎ 。 Export Item Quantity (in Ke) Import Item Quantity Recommended 1 Cold Form Blister Film Slitted (Laminate consisting of Polyamide Film/aluminium Foil/PVC Film in th width of ll5 MM to 250 MM (GSM of Laminate 240 GM+/-10%
15000.00 Cold Form Blister Film Jumbo Roll (Laminate consisting of Polyamide Film/Aluminium FoiI/PVC Film in the width of 600 MM to 1000 MM (cSM of Laminate 240 GNI{+l-10%
15300.00 Kg RA concerned may take suitable consequential action accordingly. 8 1:iSil｀ ° ・:6/1181-ALC2/201ζ 3 File

1器計児 5υ00006ハMl″ |:与力刷 :0/00402ハM15ィ ision : Committee considered the case as per agenda alongwith other relevant papers and to ratify the norms for the above advance authorization as applied for. Weight in brackets of in description of export item shall be read as weight of silicon reasin. ingly export item description may be amended. concerned may take suitable consequential action accordingly. ｄ ｅ 　 ． ｄ ・ ■ ・ |:il「 Nl.:2/1ノ81-ALi2101:
‐|:[111)lliIIttiき :「 llS° LAR 113∫1泥50/00002/AM16/ IL危刷 :0/00219ハM15/ Decision : NC observed that application for the ts and noted that no comments received comments and defer the case. case stands defelTed to 10.07.2018. above AA was referred to MNRE for inspite of reminder. NC decided to await HQ File :01/81/050/00245/AM16/ RLA File :02/24/040/00033/AM16/ Decision : NC observed that application for the above AA was referred to MNRE for mments and noted that no comments received inspite of reminder. NC decided to await comments and defer the case. case stands defclTed to 10.07.2018. Party Name:ISOVOLTA (InlDIA)PVT.LTD. ion : Committee considered the case as per agenda alongwith other relevant papers and ided to ratify the norms for the above advance authorization allowing the wastage of 5Yo. Item should contain minimum of 52500 Sq Meter of Non Woven Industrial Polyester Fleece Model TS20/ H3204.

Case No.:26ノ1/81‐ALC2/2017

lParty Name:EFD INDUCTION Meet No/Date:1/81- PRIVATE LIMITED, ALC2/2018 15.05.2018 Lic.No/Date:0710108704

Case No.:12ノ13ノ81-ALC2/2015

Case No.:27ノ13/81-ALC2/2015

Mcct No/Date:1/81‐ 田計携γ 09``β岬7. :07/24/040/00189/AM16/ .09.2015 Approved Name:JUPITER SOLAR No/Date:1/81¨ LIMITED 8 18 15.05.2018 File 10796934 1/81/050/00260/AM16/ 15 ｍ ２ ０ ‐ 晰 側

: Committee considered the case as per agenda alongwith other relevant papers and to ratify the norms for the above advance authorization as per GN-4 for Engineering ucts. 開 児剛∞ "5/AM耐

膨 淵 OЮ∞郎ハmα

圏 鼎 酬引∞″ "2 : Committee considered the case as per agenda alongwith other relevant papers and to ratify the norms for the above advance authorization as per SION C-l153 subject clearance of MoEF and import of Lead acid battery scrap is not prohibited. Pa“y Name:LS CABLE INDIA PRIVATE LIMITED, : NC observed that application for the above noted that no comments received inspite of nts and defer the case. case stands defcrrcd to 10.07.2018. Mcct No/Datc:1/81¨ ALC2/2018 15.05.2018 Lic.No/Date:0510396433 Date: 10.07.2018 AA was referred to DoT for comments reminder. NC decided to await their Meet No/Datc:1/81‐ ALC2/2018 15.05.2018 Lic.No/Date:1010059417 1DetrDttα 29.02.2016 10.07.2018 Decision : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await their comments and defer the case. Mcet No/Date:1/81‐ ALC2/2018 15.05.2018 DeFerred RLA File :10/24/040/00111/AM16/ Lic.No/Datci1010059426 Date: .03.2016 10.07.2018 Decision : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await N∝7681-ALC22∝61鶴 溜 憾 器 TED Case No。:37/19/81-ALC2/2015 Paty Name:GRAVITA INDIA ALC2/2018 15.05.2018

Case No.:25/22/81‐ ALC2/2015

11.2015 ICase No.:6ノ6/81-ALC2/2016 Party Name:FCI OEN ICONNECTORS LIMITED :01/81/050/00072/AM17/ ir comments and defer the case. 5 `≦〔 二 1シく z物L_csi,'ン/// No/Date:1/81‐ Flle

IThecasestandsdefelTedto10.07.2018. : 07.2018. | Party Name:FCI OEN CONNECTORS LIMITED No.:8/6/81-ALC2/2016 Mcet No/Date:1/81¨ ALC2/2018 15.05.2018 Deferred 膨 棚叩叫 叩α
購¶ 鼎dm∞ "お4需 .孵: Decision : NC observed that application for the above AA was referred to MeitY for ts and noted that no comments received inspite of reminder. NC decided to await comments and defer the case. casc stands defelTed to 10.07.2018. :01/81/050/00074/AM17/ 「ITTT爛縣可1麟納‐ 器ご掲。卿 η棒Ⅲ7 機 器 Oρ暉卿 耐 1器 鼎 C“ Ю卿・ Date: 10.07.2018 Decision : Committee considered the agenda in the above case and decided to ask the firm to fumish the following information : Material balance of the export item Details of the indigenous item used , Process chart :01/81/050/00097/AM17/ 1繹躙瑞T" :10/24/040/00007/AM17/ IMeetNo/Date:1/81¨ 1器盤T Lic.No/Date:1010059476 11.05.2016 No。:31/6/81… ALC2/2016 Defer Date: 10.07.2018 : NC observed that application for the above AA was referred to MeitY for and noted that no comments received of reminder. NC decided to await their comments and defer the case. case stands dcfclTed to 10.07.2018. 賭ざ孵“Ю餌の21 Decision : Committee considered the case as per agenda alongwith other relevant papers and Approved

Case No.:8/9/81‐ ALC2/2016

ParU Name:VEDANTA LIMITED :01/81/050/00175/AM17/ :35/24/040/00007/AM17/ File File

ided to ratify the norms for the above advance authorization as under : Ｓ ． Ｎ 。 Export Item Quantity (in】K2) Import Item Quantity Recommended 1 Copper Cathodc (ITCHS Code:74031100)/COntinuous Cast Copper Wire Rod (ITCHS Code:74081190)/ 13501.350 Copper in Copper Matte 13771.00 Kg concemed may take suitable consequential action accordingly.

Case No.:2/12/81‐ ALC2/2016

Parfy Name:FCI OEN CONNECTORS LIMITED :01/81/050/00219/AM17/ Mect No/Date:1/81¨ ALC2/2018 15.05.2018 RLA File :10/24/040/00025/AM17/ Lic.No/Date:1010059524 1Defer Date: on : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await ir comments and defer the case. case stands defclTcd to 10.07.2018. HQ File :01/81/050/00363/AM17/ decided to ratify the norms for the above advance authorization as per SION C-I153 subject to clearance of MoEF and its import is not prohibited. Meet No/Date:1/81- Lic.No/Date:2610012763 14.07.2016 ision : Committee considered the case as per agenda alongwith other relevant papers and to ratify the norms for the above advance authorization as per MoS comments vide their UO No. 2(6)/2018-TD dated 12.06.2018 allowing 632KgAluminium Granules per tonne Low Carbon Ferro Chrome through thermite process(copy enclosed). 15,05.2018 7 File Name:GRAVITA INDIA No/Date:1/81‐ File Date: 13/24/040/00010/AM17/ 10.07.2018 No.:22/1/81-ALC2/2017 Namc:VEEKAY TERS PVToLTD. 8 Flle 1/050/00659/AM17/

ICaseNo.:58/18ノ 81-A】LC2/2016 Party Name:VEEKAY Meet No/Date:1/81¨ ALC2/2018 15.05.2018 SⅣELTERS PVT.LTD. Decision:Cornmittee considered the case as pcr agenda alongwith othcr rclcvant papers and ided to ratify the norms for the above advance authorization as per MoS comments vide UO No. 2(6)12018-TD dated 12.06.2018 allowing 632KgAluminium Granules per tonne Low Carbon Ferro Chrome through thermite process(copy enclosed). 1誓驚銃偶声 :ドト [III] 競驚 1 1路2酬:0/00239/Av17 ion : Committee considered the agenda in the above case and decided to ask the firm to furnish the percentage of alloy composition of export item No. 2 for examination of the case. case stands defelTed to 10.07.2018. Decision : NC observed that application for the above AA was referred to MeitY for comments and noted that no comments received inspite of reminder. NC decided to await comments and defer the case. case stands defelTed to 10.07.2018. 丁冨1lTT∵押甲シ首滞ず■ 1 1 岬珠》柿面戸識需覇 隔職α∞“ 9岬71闘 Case No。:13/18/81-ALC2/2016 P額けName:GRAVITA INDIA :01/81/050/00364/A1417/ Mcet No/Date:1/81‐ ALC2/2018 15.05.2018 Deferred RLA File :13/24/040/00022/AM17/ : Committee considered the agenda in the above case and decided to ask the firm to the percentage of alloy composition of export item No. 2 & 3 for examination of the . Committee also decided to ask the applicant the lead content in the import item. case stands defened to 10.07.2018. 下 FaII」Tll:TF∵[i:琴 PH°NXFα厖騨Tト No.:4/18ノ81-ALC2/2016 NameiBINDAL TING PVT LTD 1310048372 Date: 0.07.2018

nqFil" ***-. ffiflic.No/Date:0310807899 :01/81/050/0038s/AMt7l l:$/951040100465tAM17/ lte.oe.zot6 I D.. decided to ratify the norms for the above advance authorization allowing3%o net of wastage towards cold rolling of imported coils followed by slitting to get the desired thickness and width as per MoS comments vide their UO No. 2(10)/2016-TD dated 20.02.2018 as under : Ｓ ． Ｎ 。 Item of Export Quantity in K貿 Item of Import Quantity in Kg 1 Cold Rolled Staianless steel Strips of width 36ヽ4ゝ4 to 240MNII,thickness O.10MNII to O。1 8NIIヽ4 of Grade 304/304L 119674.76 Cold Rolled Stainless Steel (Prime Quality) Coils of thickness of above 0.20MM of width above 500MM of Grade 3041304L 123265。00 RA concemed may take suitable consequential action accordingly. P錮りName:ESWARI GLOBAL∫Mcet No/Date:1/81‐ METAL INDUSTRIES ALC2/2018 15.05.2018 Lic.No/Date:07101 10463 iDeferDate: 129.09.2016 Decision : Committee considered the agenda in the above case and decided to ask the firm to furnish the percentage of alloy composition of export item No. 2 & 3 for examination of the . Committee also decided to ask the applicant the lead content in the import item. ALC2/2018 Jtatus: Deferred 15,05.2018 HQ File :01/81/050/00487/AM17/ RLA File :10/24/040/00064/AM17/ Lic.No/Date:1010059623 Defer Date: 10.07.2018 Deferred Decision : NC observed that application for the above AA was referred to Meity for and noted that no comments received inspite of reminder. NC decided to await ir colnmcnts and defcr the case. case stands dcfclTcd t0 10.07.2018. liaseNo。 :4/21/81-ALC2/261` P霞けName:FCI OEN tatus: FONNECTORSuMTED 灘 鶴.f :01/81/050/00330/AM17/ 05.10.2016 HQ Flle :01/81/050/00488/AM17/ Decision : NC observed that application for the above AA was referred to Meity for no comments received inspite of reminder. NC decided to await and noted that No.:4/15/81-ALC2/2016 ATE LIMITED File No.:3/21/81-ALC2/2016 Name:FCI OEN No/Datc:1/81- Filc 1010059624 Date: 10/24/040/00065/AM17/ 10.07.2018

躍黒蝋l富古色は | | Party Name:FCI OEN CONNECTORS LIMITED ICascNo.:10/18ノ 81‐ ALC2/201と Meet No/Date:1/81‐ ALC2/2018 15.05.2018 status: DeFerred Lic.No/Date:1010059636 1Defer Date: ision : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await ir comments and defer the case. Mcet No/Date:1/81¨ ALC2/2018 15.05.2018 Lic.No/Date:1010059638 25.10.2016 Decision : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await comments and defer the case. case stands defelTed to 10.07.2018。

Case No.:14/18/81… ALC2/2016 1PartyName:ICON POWER

Mcet No/Date:1/81‐ ALC2/2018 15.05.2018 SOLUTIONS PVT LTD Lic.No/Date:0510400322 28.10.2016 ided to ratify the norms for the above advance authorization as per GN-4 for Engineering Meet No/Date:1/81‐ ALC2/2018 15.05.2018 丁 丁 陪角鵬 OЮ0067/AM″ | :翻需甲鷲 ~1 ion : Committee considered the case as per agenda alongwith other relevant papers and ided to ratify the norms for the above advance authorization allowing the wastage of 2Yo. HQ File :01/81/050/00361/AM17/

Case No.:64/18ノ81-ALC2/2016

Party Name:FCI OEN CO■lNECTORS LIMITED

Case No.:22/24ノ81-ALC2/2016

P額りName:MANASH KUMAR 1。 “ ≦≦多:レく考ィL_二 li′ ′2/ File 10/24/040/00068/AM17/ File 1/050/00595/AM17/ ｍ ２ ０ ‐ 341Ю 1/81/050/00365/AM17/

‐ iCaseNo.:6/1/81¨ ALC2/2017 P征けName:CENTURY METAL RECYCLING PRIVATE LTD. Mcet No/Date:1/81¨ ALC2/2018 15.05.2018 Mcet No/Date:1/81- ALC2/2018 15.05.2018 Lic.No/Date:0510401631 14.02.2017 ided to ratify the norms for the above advance authorization as applied for. ICaseNo.:10/1/81‐ ALC2/2017 111RI｀ 製l::]::8砕 F:D status: Deferred iRLA File l:10/24/040/00104/AM17/ Defer Date: 10,07.2018 Decision : NC observed that application for the above AA was referred to MeitY for and noted that no comments received inspite of reminder. NC decided to await comments and defer the case. ~詢 ase No=21/1/81… ALC22017 Ⅲ りNameRSI SWITCHGEAR IIMcetNo/Dttα 1/8i」 PRIVATE LIMITED ALC2/2018 15.05.2018 ision : Committee considered the case as per agenda along with other relevant papers and ded to ratify the norms for the above advance authorization allowing all the inputs 1t to 8)as l.05kg/kg cOntent in export product as per DHI recommendation.RA shall call for net rtent of input items present in the export item and endorse the same in export item and reafter give 5Yo wastage as import entitlement. :case :01/81/050/00643/AM17/ :01/81/050/00647/AM17/ Lic.No/Datc:1010059721 15,02.2017 39 CaseNo.:24lltBl-ALC2tzOl7 ieartyName:WAGOPRITATE lMeetNo/Date:l/81- -Fpp."red |LTMTTED lALC2D}t8 I | 11s.05.2018 I HeFile -ffi[Li..NolDu,":05r040174r :0u8v050t00661/ANfi7t i:05t24/O4O/OOss2tANlt7t 12t.02.20fi | decided to ratify the norms for the above advance authorization as under: Export Product : 0280-0101/RN0l-0000 Terminal Block 2.5 eMM Grey Import Item : S.No. Export ftem name Ouantitv anplied Quantitv allowed 1 Cage Clalnp 106-280 1000000.000 Nct to Net basis as per GN4. 2. Currcnt Bar 105…280 2000000.000 11 `≦ ≡71多Kzフト417ン// File ピ

鵬OЮ∞
"/AM″
卜
Oν8ν05α00658/AM17
1310048563

3.
Polンmlide 6.6 of lDifferent
Colour 9910-107
2800.000
2666.00Kg       with
accountability
Meet No/Date:1/81‐
ALC2/2018
15.05.2018
HQ File
:01/81/050/00381/AM18/
Decision : NC observed that application for the above AA was referred to DIPP for
NC decided to await their comments and defer the case.
case stands dcfelTed to 10.07.2018.
Mcet No/Date:1/81-
ion : Committee considered the agenda in the above case and decided to ask the firm to
the following information :
Weight of the export item
Net content of input in the export item
Party Name:SVAM
Meet No/Date:1/81-
PACKAGING INDUSTRIES   iALC2/2018
PRIVATE LIMITED
15.05.2018
: Committee considered the agenda in the above case and decided to ask the firm to
the following information :
iv. Material balance of the export item
v. 
Details of the indigenous item used
vi. Process chart
Status:
DeFerred
IЪあ鵬υ
90498ハm7 穣悧器α
O%0064738賭群.孵:
## Case No.:12/4/81-ALC2/2017
PartyName:VINEY
IALC2/2018
15.05.2018
## Case No.:9/4/81-ALC2/2017
case stands defelTed to 10.07.2018.
lililll・
:8/19/81‐ ALC2/2017
1警響
αTIIEMO CABuS
TION LTD.
File
1/050/00091/AM18/
ｍ
２
０
‐
Ｍ
２
０
‐
晰
側

:01/81/050/00236/AM18/
RLA File
Lic.No/Date:5610005138
11.05.2017
ided to ratify the norms for the above advance authorization as per MoS comments vide
ir UO No. 2(6)/2018-TD dated 09.02.2018 (copy enclosed) only for this authorization. No
authorizations on the norm.
RA concemed may take suitable consequential action accordingly.
P冨りName:PARAM
INDUSTRIES
RLA File
:03/95/040/00111/ANI11 8/
Mect No/Date:1/81‐
ALC2/2018
15.05.2018
Lic.No/Date:0310813248
12.05.2017
itus:
ferred
Date:
10.07.2018
: Committee considered the case as per agenda alongwith other relevant papers and
ted that application was forwarded to DIPP for comments, however, DIPP have informed
firm is an MSME Unit and case may be referred to MSME for comments. Accordingly,
C decided to forward the case to MSME for comments.
casc stands dcfelTed to 10.07.2018.
Mcet No/Date:1/81‐
Approved
鵬厨児剛∞"7/AMW 
‐
Decision : Committee considered the case as per agenda alongwith
ided to ratify thc norlns fOr the above advance authOrization as
their UO No. 2(6)/2018-TD dated 24.04.2018 (copy enclosed).
硼温高
「
T器孵“Ю
TЯω
other relevant papers and
per MoS comments vide
iRA concerned may take suitable consequential action accordingly.
RLA File
:13/24/040/00012/AM18/
Mcct No/Date:1/81‐
ALC2/2018
15.05.2018
1悧辮“Ю
“
剛
:
: NC considered the agenda alongwth relevant documents and decided to
for the above advance authorization as under :
1. Quantity of import item may be allowed as 38505.00 Kg inclusive of 3%owastage.
丁
[II菫lIIγ lW下討
T羊 嬉鰈飢卜F明
:01/81/050/00273/AM18/
ALC2/2018
15.05.2018
:01/81/050/00379/AM18/
No.:18/12ノ81‐ALC2/2017
File
No.:6/19ノ81…ALC2/2017
Name:SHERA METAL
:LTD.
File
1聾#器Ⅷ器告
∬
EEL

Lた。No/Date103 10813559 :Detr Dtte:
ision : Committee considered the case as per agenda alongwith other relevant papers and
that application was forwarded to DIPP for comments, however, DIPP have informed
firm is an MSME Unit and case may be referred to MSME for comments. Accordingly,
C decided to forward the case to MSME for comments.
case stands dcfelTed to 10.07.2018.
P釘サName:THERMO CABLES
Mcet No/Date:1/81¨
ALC2/2018
15.05.2018
LIMITED
Decision : NC observed that application of the firm for the above AA was referred to
DIPP. NC decided to await their comments and defer the case.
case stands defclTed to 29.05.2018.
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
Lic.No/Date:0310813869 1DeferDate:
ｄ
Ｓ
ｔ
ａ
ｔ
ｕ
ｓ
‥
¨
D..trtrr, r C.-"rittee considered the case as per agenda alongwith other relevant papers and
noted that application was forwarded to DIPP for comments, however, DIPP have informed
fl.1..is an MSNIIE Unit and case rnay be referred toヽ4SNIIE for corninents.Accordingly,
decided to forward the case to MSME for comments.
ParUName:TECHNO TRAK
Mcet No/Date:1/81-
Status:
Deferred
ENGINEERS
ALC2/2018
15.05.2018
Defer Date:
10.07.2018
ion : NC observed that application of the firm for the above AA was referred to
DIPP. NC decided to await their comments and defer the case.
Meet No/Date:1/81-
Status:
Deferred
ALC2/2018
15.05.2018
HQ File
:01/81/050/00275/AM18/
RLA File
:03/95/040/00193/AM18/
RLA File
:03/95/040/00238/Aヽ418/
Lic.No/Date:3110066784
15.06.2017
Lic.No/Date:0310814089
19.06.2017
Defer Date:
10.07.2018
Casc No.:7ノ19/81‐ALC2/2017
## Case No.:20/12/81… ALC2/2017
## Case No.:9/10/81‐ ALC2/2017
Case No。:17ノ12/81‐ALC2/2017
Party Name:PARAM
:01/81/050/00272/AM18/
“```:  
〔::i:;;iそi::|,1:メロ.=L_■」
  |::||;;″
″
ノ///.
102 1Defer Date:
10.07.2018
1甲撃
MI
10.07.2018
File
File
1/81/050/00234/AM18/
1/83/040/00042/AM18/

noted that application was forwarded to DIPP for comments, however, DIPP have informed
firm is an MSME Unit and case may be referred to MSME for comments. Accordingly,
decided to forward the case to MSME for comments.
~~~iCaseNo.:13/10/8:―
ALC2/2017 1
111)『||:50/00278/AM18/
P冨けName:SIECHEM
TECHNOLOGIES PRIVATE
LIMITED
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
RLA File
:04/24/040/00022/AM18/
Lic.No/Datc:0410163279
ision : NC decided to ratify norms for the above advance authorization as per written
rrmcnts ofDIPP vidc F.No.7/99/17-′「S/25 dated 27.05。2018 as under:
Quantity of import items at Sl. Nos. I and 2 for the export items at Sl Nos. I to 14
[Control Cable (Copper Conductor)] may be allowed as per SION C248 (Engineering
Table 5) or as applied for, whichever is less.
Quantity of import items at Sl. Nos. I and 2 for the export items at Sl Nos. 15 to 19
[Solar Cable/ Solar (Copper Conductor)] may be allowed as per SION C270
(Engineering Table 6) or as applied for, whichever is less.
(iii) The Import items should be of relevant grade, size and specifications as contained in the
respective EPs. Net content of above input in the EP will be as certified by jurisdictional
GST Authorities.
(iv) Departrnent of Heavy Industry may be for the export items at Sl Nos. 20 to 29
[Automotive Cable (Copper Conductor)].
Case No■23/12お1-ALC22017いけNamcPOLYCAB WIRES IMcetNo/Date:ν 81‐
IALC2/2018
115.05。2018
pproved
.2 under the
l.01 Kgs./Kg.
1.01 Kgs./Kg.
1.05 Kgs./kg
Lic.No/Date:0310814293
28.06.2017
:cision : NC decided to ratify norns for the
mments of DIPP vide F.No.7lz9lz}l$-TSdated
above advance authorization as per written
16.03.2018 as under:
Description, sizes, quantities and net weight of export items at Sl. No. I &
Advance Authorization may be specified as per enclosed Annexure.
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as
content in the export items at Sl. No. I &2.
Quantity of import item at Sl.No.2 i.e. Aluminium Ingot may be allowed as
content in the export items at Sl. No. I &2.
Quantity of import item at Sl. No. 3 i.e. LDPE Compound may be allowed as
content in the export items at Sl. No. | & 2.
Quantity of import item at Sl. No. 4 i.e. PVC Resin may be allowed as 1.05 Kgs./Kg. content
the export item at Sl. No. 1.
::01/81/050/00238/AM18/
27.06.2017
15
.LTD.

6. Quantity of import item at Sl. No. 5 i.e. PVC Plasticizer may be allowed as 1.05 Kgs./I(g. conte
in the export item at Sl. Nol .
7. Quantities of import items at Sl. No. 6 to 13.( LLDPE, Aluminium Trihydrate. Silane Couplir
Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium Hydroxide) mz
be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 3.
8. Import item at Sl. No. 14 i.e. Wooden Cable Drum may be allowed as per packing policy
Approved
Lic.No/Date:0310814274
06.2017
r : NC decided to ratify noffns for the above advance authorization as per written
ts of DIPP vide F.No.7l29lz}l8-TSdated 16.03.2018 as under :
l. 
Description, sizes, quantities and net weight of export items at Sl. No. I to 3 under
the Advance Authorization may be specified as per enclosed Annexure.
2. 
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as l.0l
Kgs./I(g. content in the export items at Sl. No. I to 3.
3. 
Quantity of import item at Sl. No.2 i.e. LDPE Compound may be allowed as 1.05
Kgs./kg content in the export items at Sl. No. 2 &3.
4. 
Quantities of import items at Sl. No. 3 to l0 ( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxiden! Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 3.
5. 
Quantityof importitematSl.No. 1l i.e.PVCResin maybeallowedas l.05Kgs./Kg.
content in the export item at Sl. No. 1.
6. 
Quantity of import item at Sl. No. 12
Kgs./Kg. content in the export item at Sl. No .1
i.e. PVC Plasticizer may be allowed as 1.05
7. 
Quantity of import item at Sl. No. 13 i.e. Galvanised Steel Wire may be allowed as
1.02 kgs/kg content in the export items at Sl. No. 2 & 3.
8. 
Import item at Sl. No. 12 i.e. Wooden Cable Drum may be allowed as per packing
policy.
RA concemed may take suitable consequential action accordingly.
Paty Name:POLYCAB WIRES
Mcet No/Date:1/81¨
PVT.LTD.
ALC2/2018
15.05.2018
PTりName:POLYCAB WIRES
PVT.LTD.
潜滞:11
」
Ｆ
RLA File
:03/95/040/00138/AM18/
1親孵α“Ψ71
: NC decided to ratify nonns for the above advance authorization as per written
ofDIPP vide F.No.7/29/2018-TS datcd 16.03.2018 as under:
Description, sizes, quantities and net weight of export items at Sl. No. I to 16 under the
Advance Authorization may be specified as per enclosed Annexure.
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as 1.01 Kgs./Kg.
## Case No.:24/12/81-ALC2/2017
Casc No.:26/12ノ81-ALC2/2017
:01/81/050/00281/Aヽ418/
16
File

content in the export items at Sl. No. I to 8, 10, I l, 13,14 & 16.
Quantity of import item at Sl.No.2 i.e. Aluminium Ingot may be allowed as .
content in the export items at Sl. No. 6,7,9 12, 13 &. 15.
Quantity of import item at Sl. No. 3 i.e. LDPE Compound may be allowed as
content in the export items at Sl. No. 1,2,3 & 6 to 16.
1.01 Kgs./Kg.
Kgs./kg
Quantity of import item at Sl. No. 4 i.e. Semi Conducting Compound may be allowed as 1.05
kgs&g content in the export items at Sl. No.6, l0 & 12to 15.
Quantity of import item at Sl. No. 5 i.e. PVC Resin may be allowed as 1.05 Kgs./Kg. content
in the export items at Sl. No. 1,3,4,5,9, 11,12,14 & 15.
7. Quantity of import item at Sl. No. 6 i.e. PVC Plasticizer may be allowed as
content inthe export item at Sl. No . 1,3, 4, 5,9, ll, 12, 14 &. 75.
Kgs./I(g.
8. Quantity of import item at Sl. No. 7 i.e. Copper Tape may be allowed as l.0l Kgs./Kg. content
in the export items at Sl. No. 6,l0 & 12to 15.
9. Quantity of import item at Sl. No. 8 i.e. Galvanised Steel Wire may be allowed as 1.02 kgs/kg
content in the export items at Sl. No.l, 8, 9 to 12,14 & 15.
10. Quantities of import items at Sl. No. 9 to 16.( LLDPE, Aluminium Trihydrate. Silane Coupling
Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium Hydroxide) may
be allowed as 1.05 Kgs.A(g. content in the export items at Sl. No. 7, 8, l0 & 13.
Import item at Sl. No. 17 i.e. Wooden Cable Drum may be allowed as per packing policy
## Case No.:27/12/81‐ ALC2/2017 1
:ALじZ/ZUla
:15.05.2018
囲辮鵬∵
8TT
lMeet No/Date:l/81-
lltcznon
Approved
RLA Filc
rn : NC decided to ratify norns for the above advance authorization as per written
nts of DIPP vide F.No.7l29lz0l8-TSdated 16.03.2018 as under:
Description, sizes, quantities and net weight of export items at Sl. No. I to
Advance Authorization may be specified as per enclosed Annexure.
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as .
content in the export items at Sl. No. I to 8.
Quantity of import item at Sl. No. 2 i.e. LDPE Compound may be allowed as
under the
Kgs./I(g.
２
　
　
３
1.05 Kgs./kg
content in the export items at Sl. No. I to 8.
4. Quantity of import item at Sl. No. 3 i.e. PVC Resin may be allowed as 1.05 Kgs./I(g. content
in the export items at Sl. No. I to 6.
5. Quantity of import item at Sl. No. 4 i.e. PVC Plasticizer may be allowed as
content in the export item at Sl. No . 1 to 6.
Kgs./Kg.
Quantities of import items at Sl. No. 5 to 12 ( LLDPE, Aluminium Trihydrate. Silane Coupling
Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium Hydroxide) may
be allowed as 1.05 Kgs.A(g. content in the export items at Sl. No. 7 &,8.
Quantity of import item at Sl. No. 13 i.e. Glass Mica Tape may be allowed as 1.02 Kgs./Kg.
content in the export items at Sl. No. 9, 5,6 &,7 .
Quantity of import item at Sl. No. 14 i.e. Galvanised Steel Wire may be allowed as 1.02 kgs/kg
content in the export items at Sl. No.l to 6.
Import item at Sl. No. 15 i.e. Wooden Cable Drum may be allowed as per packing policy.
6.
7.
０
０
9.
照
淑
cPOLYCAB ⅥuS
17                            
∠三〔1多ン(Ъ4_ι
“
1)レ
//
File
1/050/00282/AM18/

le COT9queⅢⅢC119n"COrdi'gly・   |  
‐ ‐  |
|ぃ,o19叩e。平aytⅢ9,'tab
Party Name:POLYCAB WIRES
RLA File
:03/95/040/00284/AM18/
翻孵l引TΨ
Approved
Decision : NC decided to ratify norns for the above advance authorization as per written
ofE)IPP vidc F.No.7/29/2018…TSdated 16.03.2018 as under:
l. 
Description, sizes, quantities and net weight of export items at Sl. No. I to 15 under
the Advance Authorization may be specified as per enclosed Annexure.
2. 
Quantrty of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as 1.01
Kgs./I(g. content in the export items at Sl. No. 1 to 4 & 6 to 15.
3. 
Quantity of import item at Sl.No.2 i.e. Aluminium Ingot may be allowed as l.0l
Kgs.lKg. content in the export items at Sl. No. 1, 3, 5 & 15.
4. 
Quantity of import item at Sl. No. 3 i.e. LDPE Compound may be allowed as 1.05
Kgs.lkg content in the export items at Sl. No. I to 4,6,8,9,1I & 13 to 15.
5. 
Quantity of import item at Sl. No. 4 i.e. Semi Conducting Compound may be allowed
as 1.05 kgs/kg content in the export items at Sl. No. 2 & 3.
6. 
Quantity of import item at Sl. No. 5 i.e. PVC Resin may be allowed as 1.05 Kgs./Kg.
content in the export items at Sl. No. I to 14.
7. 
Quantity of import item at Sl. No.6 i.e. PVC Plasticizer may be allowed as 1.05
Kgs./Kg. content in the export item at Sl. No . I to 14.
8. 
Quantity of import item at Sl. No. 7 i.e. Copper Tape may be allowed as l.0l
Kgs./I(g. content in the export items at Sl. No. 2 &3.
9. 
Quantrty of import item at Sl. No. 8 i.e. Galvanised Steel Wire may be allowed as
1.02 kgs/kg content in the export items at Sl. No.2, 4 & 14.
10. 
Quantities of import items at Sl. No. 9 to 16.( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 15.
I I . 
Quantity of import item at Sl. No. 17 i.e. Lead lngot may be allowed as I .01 kgs/kg
content in the export items at Sl. No. 3 & 14.
12. 
Import item at Sl. No. 18 i.e. Wooden Cable Drum may be allowed as per packing
policy.
Meet No/Date:1/81-
ALC2/2018
15.05.2018
Approved
RLA File
:03/95/040/00026/AM18/
: NC decided to ratiff norms for the above advance authorization as per written
of E)IPP vide F.No_7/257/17… TSW/16 dated 18.04.2018 as under:
Aluminium Conductor Steel Reinforced and All Aluminium Alloy
Lic.No/Date:0310814496
06.07.2017
Export Products
Conductor
:01/81/050/00280/AM18/
No.:28ノ12/81-ALC2/2017
:01/81/050/00283/AM18/
ParりName:STERLITE POWER
TRANSMISSION LIMITED
18
No.:25ノ12/81-ALC2/2017
.LTD.
File

Import ltems:
(D ltem 1, 2 and3 may be allowed as per SION C7.
(iD ltem 4 may be allowed asZ%oofFOB value ofEP at Sl No. l.
(iii) Items 5, 6 and 7 may be allowed as per C1394.
(iv) These import items may be allowed as per the above-referred SIONs or as applied for,
whichever is less.
(v) Import items should be of relevant grade, size, thickness, diameter as contained in the EP. Net
content of above inputs in the export product will be as certified by jurisdictional GST
Authorities.
RA concemed may take suitable consequential action accordingly.
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
醜tttυ00,25■mν
fer Date:
10.07.2018
Decision :NC noted that MOS deficiency letter sentto firm on 17.11.2017 followed with
reminder dated 13.02.2018 sent to firm. Committee decided to send a final reminder and defer
the case.
The case stands deferred to 03.06.2018.
:01/81/050/00374/AM18/
Defer Date:
10.07.2018
that application was referred to DIPP, however, DIPP has retumed the
ication with remarks that case pertains to MSME. NC decided to forward the application
MSME for comments and defer the case.
casc stands deferred to 10.07.2018.
Meet No/Date:1/81‐
IALC2/2018
15,05.2018
Lic.NoノlDate:0610038672
109.08.2017
10.07.2018
: :NC noted that DHI deficiency letter dated 22.12.2017 followed with reminder
to send a final reminder and defer the case.
15.02.201 8 sent to f11111.Corrllnittee dccidcd
ICase No.:21/12/81-ALC2/2017
P冨りName:PHOENIX FOILS
PVT.LTD.
101/81/050/00276/AM18/
Lic,No/Date:0310814663
18.07.2017
## Case No.:1ノ19ノ81-ALC2/2017
Party Name:TECHNO TRAK
IRLA File
l:31/83/040/00062/AM18/
Lic.No/Datc:3110066831
08.08.2017
## Case No.:5ノ19/81-ALC2/2017
casc stands dcfcrrcd to 10.07.2018.
19                            
』≦二多毛シス
`り
ぃ嘔
i′
)//
No/Datc:1/81‐
15.05.2018
Date:
:01/81/050/00378/AM18/

:01/81/050/00383/AM18/
ｄ
ｔ
ｕ
Ｓ
‥
ｍ
RLA Flle
:02/24/040/00085/AM18/
Lic.No/Date:0210207816 :Dcfer Date:
28.08.2017
10.07.2018
ision :NC noted that MOS deficiency letter sent to firm on 29.12.2017 followed with
dated 15.02.2018 sent to firm. Committee decided to send a final reminder and defer
casc stands defelTed to 10.07.2018.
P征りNalne:WELSPUN CORP
LTD。
Mcet No/Date:1/81-
Approved
ALC2/2018
15.05.2018
RLA File
:34/24/040/00153/AM18/
Lic.No/Date13410043485
Decision : NC decided to ratify norns for the above advance authorization as per written
ofDIPP vide FoNo.47011/165/18-TSW/09 datcd 23.04.2018 as under:
Export Products: Non Alloy Sed Black Pipe with 3LPE &ating of 1.80mm thickness, Non
Alloy Seel Black Hpe and Non Alloy $eel Bend with Heat $rink Seeve
6ating.
Import ltems:
(i) lmport item 1,2,3 and 4may be allowed as per SCt{ C1289.
(ii) These import items may be allowed as per the above.referred SCNs or as applied for,
whichaner is less.
(iii) lmport itenrs should be of rdevant grade, size and specifications * contained in the EP.
Net content of above inputs in the EP will be as certified by jurisdidional GSI
Authorities.
Party Name:JAIN METAL
Mect No/Date:1/81‐
ALC2/2018
15.05.2018
Rejected
ROLLING MILLS
“
1聯ご児
,OЮ"%■叩γ lじ刷
:υ叩
“
岬w iぶ器α∵TTT9 1
Decision : Committee considered the case and noted that export item is not specific and also
content in import itern not specifled.Therefore,Colrmittee decided to re」ect the case.
RA concerned may take necessary consequential action accordingly.
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
Lic.No/Date:0410163563
## Case No.:17719/81‐ ALC2/2017
19.09.2017
:01/81/050/00390/AM18/
## Case No.:3/19/81¨ ALC2/2017
ICase No.:4/19ノ81-ALC2/2017
:01/81/050/00377/AM18/
PrりName:JAIN METAL
ROLLING MILLS
28.09.2017
No.:10/19ノ81-ALC2/2017
Name:MANAKSIA
METALS AND
LIMITED
case.

sion : Committee considered the case and noted that export item is not specific and also
content in import item not specified. Therefore, Committee decided to reject the case.
concerned may take necessary consequential action accordingly.
「
¨
19/81‐ALαttr辞鵬肌LM■
IHQFile
l:01/81/050/00386/AM18/
Mcet No/Date:1/81‐
Lic.No/Date:0210207888
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
Defer Date:
10.07.2018
they have informed that
the application to DIPP
status:
Deferred
Status:
Deferrd
: NC noted that application was referred to MoS, however,
pertains to DIPP. Accordingly, Committee decided to forward
for comments and defer the case.
|「下∵
T‐TC2/20181
PTりName:ACG
PHARMttPACK PVT LTD
P征けName:ACG
PHARMAPACK PVT LTD
P霞りName:KITCHEN
ESSENTIALS
Lた.No/DttcЮ 310816606 1Deおr Dttc:
30.10.2017
10.07.2018
ision : NC considered the agenda alongwith relevant record and decided to forward the
ication to Technical offrcer (Shri Shesh Kumar, Consultant, DGFT) to examine the case.
case stands dcfelTed to 10.07.2018.
「
~:iCaseNo.:6/22ノ
81‐ALC2/2017  1
Approved
:RLA File
l:03/94/040/00587/AM18/
計∬辮α“Ю譴““
Decision : NC considered the agenda alongwth relevant documents and decided to ratify
norrns for the above advance authorization as under :
1. Quantity of import item may be allowed as 53500.00 Kg inclusive of 7%o wastage.
ALC2/2018
15.05.2018
::02/24/040/00105ノAM18/
IThecasestandsdefelTedto10.07.2018.
## Case No.:3/1/81¨ ALC2ノ2018
Lic.No/Date:0310816605
30.10.2017
10.07.2018
: NC considered the agenda alongwith relevant record and decided to forward the
to Technical officer (Shri Shesh Kumar, Consultant, DGFT) to examine the case.
15,05.2018
Mcet No/Date:1/81-
15.05.2018
:01/81/050/00489/AM18/
File
1/050/00003/AM19/
No/Date:1/81¨
8
:01/81/050/00004/AM19/

## Case No.:8/22/81-ALC2/2017
Approved
ion : NC decided to ratify norrns for the above advance authorization as per written
of DIPP vide FoNo.7/103/2018-TS datcd 14.03.2018 as under:
l. Import items at Sl. No. I to 4 shall be of relevant grade as contained
products.
the export
2. 
Quantity of import item at Sl. No. I may be allowed as applied for i.e.
40,000 Kgs. as 1.072 Kgs./Kg. in the export product at Sl. No. I after taking l/3'd
recovery from scrap.
3. 
Quantity of import item at Sl. No. 2 may be allowed as applied for i.e.
50,000 Kgs. as 1.072 Kgs./Kg. in the export product at Sl. No. 2 after taking l/3'd
recovery from scrap.
4. 
Quantity of import item at Sl. No. 3 may be allowed as applied for 72000
Kgs. as 
1.074 kgs./Kg. in the export product at S1. No. 3 after taking 1/3'd
recovery from scrap.
5. 
Quantrty of importitem at Sl. No. 4may be allowed as9023 Kgs. as 1.173
Kgs./Kg. in the export product at S1. No. 4 after taking 1/3'd recovery from scrap.
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
Lic.No/Date:3410043635
ided to ratify the norms for the above advance authorization as per MoS comments vide
ir UO No.2(8)/2017‐ TD dated 10.04.2018(copy enc10sed).
鵬掲ッ
OΨぃ叩ν l聯難
9ρ
“
ゃハmy 諸ざ器α“Ю税
""
Approved
Lic.No/Date:0310817088
15.11.2017
Decision : NC decided to ratify norrns for the above advance authorization as per written
of DIPP vidc F.No.7/31/2018-TS/23 dated 03.05.2018 as undcri
Export Products : Alloy Steel Submerged Arc Welded Pipes with 3 layer Polyethylene
## Case No.:3/22/81¨ ALC2/2017
Party Name:CHINA STEEL
CORPORATION INDIA
PRIVATE LIMITED
## Case No.:15/22/81‐ ALC2/2017
Coating of 3.5mm thickness.
No/Date:1/81-
8
15.05.2018
p l:0 t I 8r I 050/00498/AM I 8/

The above AA may be ratified
Import ltems:
(i) 
Item 1, 2,3,4,5 and 6 may be allowed as per SION C1292.
(iD 
These import items may be allowed as per the above-referred SIONs or as applied for,
whichever is less.
(iiD Import items should be of relevant grade, size and specifications as contained in the
EP. Net content of above inputs in the export product will be as certified by
jurisdictional GST Authorities.
## Case No.:16/22/81-ALC2/2017 1P田りName:MAN INDUSTRIES
I′ n_T▲
、T ttA
|(INDIA)LTD.
ALC2/2018
15.05.2018
:cision : NC decided to ratify norns for the above advance authorization as per written
mments of DIPP vide F.No.7l3ll20l8-Tsl22 dated 03.05.2018 as under :
Export Products: Alloy Steel Submerged Arc Welded Pipes with 3 layer Polyethylene Coating of
3.5mm thickness.
Import Items:
(D Item l, 2,3,4,5 and 8 may be allowed as per SION C1292.
(ii) oZ wastage on net content for the items 6 and 7 may be allowed as repeat of AA No.
03 I 0808762 dated 26. I 0 .201 6 ratified in NC meeting dated 27 .t2.20t6.
(iii) These import items may be allowed as per the above-refened SlONs/%wastages or as
applied for, whichever is less.
(iv) Import items should be of relevant grade, size and specifications as contained in the Ep. Net
content of above inputs in the export product will be as certified by jurisdictional GST
Authorities.
RA concerned may take suitable consequential action accordingly 
f
STANIPINGS&
Mcet No/Date:1/81‐
ALC2/2018
15.05.2018
|                 ILAMINATIONS LIMITED
器群児
50Ю0485/AⅢν l跳λ鵬
OЮ0647ハmν
嚇∬辮m卿
decided to ratify the norms for the above advance authorization as per MoS comments vide
their UO No. 2(6)/2011-TW dated 24.01.2018 (copy enclosed).
RA concemed may take suitable consequential action accordingly.
Mcct No/Date:1/81‐
Lic.No/Date:0310817152
20.11.2017
P霞りName:AESTHETIC
23                             2≦多Zシンくみ4“已≦
i:`i//
File
1/050/00499/AM18/

## Case No.:1/22/81‐ ALC2/2017
HQ Filc
:01/81/050/00484/AM18/
in MT
Import Item Name
Quantity
allowed
P田りName:SKIPPER LIMITED
Meet No/Date:1/81-
ALC2/2018
15.05.2018
Approved
RLA File
:02/24/040/00138/AM18/
Lic.No/Date:0210208007
.11.2017
Decision : NC considered the agenda alongwth relevant documents and decided to ratify
for the above advance authorization as under :
SloNo. Export Item Name.
Transmission Line / Telecom Towers & parts there of
ns 
of 
(l)
Relevant
Billets of relevant grade of steel, Net Qty. 6254.25 MT-(H S
code 72071920) / Angles of relevant grade of steel, Net
.6254.25 MT― (H S COde 72162100/72165000),(2)3124.81
of Relevant H.R.Coil(Hot Rolled Flat Products)cont tO Sl
2.
from sl no l.) Non Alloy and Other Alloy in coil form
width of 600 mm and above) (HS Code 72253090) I
16292.000
0.001
Ho Ro Stecl Plate(HT/MS)(HS COdC 72083710/73082011),(3)
1133.09 MT ofl」llrought Zinc containing by weight 99.99%or
of Zinc and (4) 650.37 MT of Relevant Alloy Hot Rolled
Steel Wire Rod of relevant grade of steel (for Nut & Bolts)
Committee observed that Billiets and Angles claimed as one quantity. Committee decided to
quantity of input item sl.no-1.
Billets of relevant grade
of 
steel,
35.691MT
Qty.6254.25 MT-(H S code 72071920) I
of relevant grade of steel, Net Qty. 6254.25 MT-(H S
79.335
72162100/72165000)
levant H. R. Coil (Hot Rolled Flat Products) Non Alloy and
ther
281.050
Alloy in coil foll..
72253090)/H・R.
(Width Of 600 mm and above)(HS COde
Stccl Plate(HT/MS)(HS COde 72083710/
3082011)
nrought Zinc conraining by weight 99.99% or more of Zinc
1016。00MT
levant Alloy Hot Rolled Steel Wire Rod of relevant grade of
12.971lИT
(for Nut&Bolts)
24

IRAconcemed may●kc sdねЫc conscquentid action accordn」y.           |
%鵬厨児
50/004"AMI
ALC2/2018
15052018
Lic No/Datei04 1016375 1
29112017
Withdrawn
for above advance
Committee decided
Fi.tr,, r C"*rntttil
lauthorization ratified in NC M.No.24l81 dated 20.03.2018. Accordingly,
Ito withdraw the case lrom the agenda.
:03/95/040/00666/AM18/
ICaseNo.:9/22/81‐ ALC2/2617
|
1翻r…
Lic No/Date:0310817454
30112017
Lic No/Datc:0310817472
04 122017
1翻
「
肝
~
ision :NC noted that application for the above AA had b".n ,.f*d
to DIPPおr
NC decided to await their comments and defer the case.
case stands dcferrcd t0 10.07.2018.
Defer Datei
10.07.2018
tatus:
Deferred
郡3Л児剛∞のν
Attν  ttλ蠍∽
"仰
Att ν
Defcr Date:
10072018
rcferrcd tO DIPP fOr
Decision :NC noted that MOS deficiency letter dated 09.02.2018 scnt to flrm.cOmrnittcc
ided to send a reminder to firm and defer the case.
The case stands deferred to 10.07.201g.
tatus:
Deferred
HQ File
Lic.No/Date:0310817568
Defcr Date:
10072018
79 :O1/81/050/00494/AM18/
07.122017
Decision : NC noted
RLA Filc
:03/95/040/00739/AM18/
that application for the above AA had been
to await their comments and defer the case.
mments. NC decided
The case stands def'erred to 10.07.201g.
隅粗
It-l..Nozoii.,: r I ooooe:s
面
Ｄ
ａ
‐
８
８
Ｍ
ｃ
ｃ
ｔ
Ｎ
。
／
¨
¨
:01/81/050/00497/AM18/
lnln rite
F震¨…9期7
Name:JAIN METAL
νIILLS
No/Date:1/81‐
NamelPHOENIX FOILS
No.:11/22/81-ALC2/2017
Name:POLYCAB WIRES
LTD.
No.:13/22/81‐ ALC2/2017
FeN∝
И2ν81‐ ALCν 狙7ド
湘
cPoLYCAB ⅥRЁS

l:0 I /8 I /050/0 o4s6t AMl 8t
l3vr;,fiaofior2s/AMl8/
12.2017
1007.2018
: NC noted that application was refened to DIPP, however, DIPP has returned the
NC decided to forward the application
pplication with remarks that case pertains to MSME.
MSME for comments and defer the case.
us:
Deferred
Lic No/Date:0510404960  1Dcfer Datei
10072018
Decision : Committee considered the agenda in the above case and decided to ask the firm to
ish the percentage of alloy composition of export item-Lead Alloy for examination of the
. Committee further decided to ask percentage Lead content in import item -Lead Scrap.
case stands deferred to 10.07.201 8.
Mcct No/Datc:1/81‐
ALC2/2018
15.052018
Approved
Lic,No/Datc:0310818034
2712.2017
per DIPP comments vide
ided to ratify the norms for the above advance authorization as
their F No.7/257/17/TSW/18 dated 18.04.2018 as undcr:
Export Products : Aluminium Conductor Steel Reinforced and All Aluminium AIloy Conductor
Import Items:
(i) Item l, 2 and 3 may be allowed as per SION C7.
(ii) Item 4 may be allowed as2%o of FoB value of EPs at SlNo. 1 and 2.
(iii) Items 5, 6 and 7 may be allowed as per C1394.
iiri These import itemi may be allowed as per the above-referred SIONs or as applied for,
whichever is less.
(v) Import items should be of relevant grade, size, thickness, diameter as contained in the EP. Net
content of above inputs in the export product will be as certified by jurisdictional GST
Authorities.
RLA F‖ e
:03/95/040/00648/AM18/
Party Name:POLYCAB WIRES
PVT LTD
Meet No/Date:1/8ト
ALC2/2018
15.05.2018
Mcet No/Date:1/81‐
ALC2/2018
15.052018
us:
Deferred
RLA File
:03/95/040/01019/AM18/
Lic.No/Date:0310819401
br Date:
10072018
: NC noted that application for the above AA had been
:01/81/050/00493/AM18/
:05/24/040/00382/AM18/
## Case No.:12/22/81-ALC2/2017
Party Name:STERLITE POWER
TRANSMISS10N LIMITED
:O1/81/050/00495/AM18/
## Case No.:1/1/81-A LC2/2018
:01/81/050/00001/AM19/
mments. NC decided to await their comments and defer the case.
referrcd to DIPP for
15 12.2017
F‖ c
Pany Name:PILOT
INDUSTRIES LTD
26                                    “
``≦
fl::ケ
`′ι′
1′
//////

「
he ttc ttanホdeたredゎЮЮ■
2∝&            |
~ICase No.:5/1/81‐
ALC2/2018
ParりName:AMARA RAJA
BATTERIES LTD
Mcet No/Date:1/81‐
Lic No/Date:0410164013
Mect No/Datei1/8ト
ALC2/2018
tus:
Deferred
Defer Datc:
10072018
Decision : NC decided to forward the application for the above AA to DIPP for comments
defer the case.
RLA Filc
:04/24/040/00197/AM17/
IParty Name:KIRTANLAL
「
‐ 比
関VA‐ LIMl‐ D
“
に1『児剛∞∞νAM D戸
脇
靡
蕊
戸
H¶
鼎
α
“
Ю授
“
解
脇
.器:
15052018
ision : NC decided to forward the application for the above AA to MSME for commenrs
defer the case.
********
ALC2/2018
15.05.2018
:01/81/050/00005/AM19/
27022018
## Case No.:2/1/81-ALC2/2018
27

((:臨)
Deputy industrial Adviser
Government of lndia
Ministry of Steel
Technical Wing
## Subject: Ratification of norm in terms of Para 4.7 of HBp (Vol-l) for Advance
Authorizations No 2610012779 dated 15.12.2016, 2610012163 dated 14.07.2016
and 26100'12767 dated 17.08.2016- M/s V K Smelter pvt Limited.
DGFT may refer to their UOs No 01/8"1/50i524tAM-17lDES-2/68 dated
03.04.2018, 01/81/050/00659tAM-ITtDES-2t72 dated 01.05.2018 and
01/81/050/00409/AM-17/DES-2123 dated 01.05.2018 for ratification of above
mentioned Advance Authorizations of 
M/s v K smelter pvt Limited,
vishakhapatnam. ln this connection, it is informed that Ministry of Steel has
examined the request of the applicant in consultation with lndian Ferro Alloy
Producers Association (IFAPA), Kolkata and others, and this Ministry certifies that
632 Kg Aluminium Granules would be required per tonne of Low carbon Ferro
Chrome through thermite process.
However, it is noted that in one of the applications, the company has applied
for 20 MT of Aluminum Granules against export of 10g MT of Low carbon ferro
chrome i.e. @ 185 Kg of Aluminum Granules per tonne of export product. on the
other hand, in two other applications, they have applied for @ 900 Kg and 925 Kg
each per tonne of the export product. The company has clarified that in the l"tcase
of import of 20 MT, their export quantity was 21.338 MT ( i.e @ 937 Kg), however,
they wrongly mentioned export quantity as 108 MT.
ln view of the above, DGFT Norms committee may take suitable decision on
the quantity of Aluminum Granules to be allowed in the three cases stated above.
,hri VinOd Kashayap, FttDO NC il,DGFT, Udyog Bhawan, New
Ministry Of Steel U O No 2(
lg―TD dated 12062018
_28-
ヾて
,′

′ 6
terms Of Para 4.7 of HBP(VOi‐
1)。f Advance
dated 19.09.2016‐
M′S PhOenix Foils Private
DGFT may refer to their UO note No O1l81l5}l 385 /AM-17/DES-2/ dated
zt.ll.iola r"g"rding turnisning the comments of Ministry of steel for ratification of
tn" q*.titv 6t it"i., ot lmpJrt and export of the above mentioned Advance
Authorization. ln tnis connection, the following quantity of import may be allowed
against exPort:
Thequantityhasbeencalculatedbyallowing3%netofwastagetowardscold
rolling of imported coils followed by slitting to get the desired thickness and width.
唾
(S K Bhatnagar)
Deputy lndustnal Adviser
Bhawan,New De!hi             __
Government of lndia
Ministry of Steel
Technical Division
RIm需:鳳「耐
ill∬
1器‖
:9F
Limited,Mumbai.
１
　
０
Ｓ
Ｎ
Item of export
Quanlty
Item of import
Quan■ty
1
cOld  Rolled  Stainless
Steel st面ps of Width 36
MM  to  240  MM,
Thickness 0 10 MM tO
0 18 MM Of Grade
304ノ304L
11967476
Kg
Cold Ro‖ ed Stainless
Steel(Pnme Quality)
cOns Ofthickness abOVe
0 20 MM OfVVidth above
500  MM  Of  Grade
304/304L
12326500
Kg
Shri Vinod
FTDO,DGFT,
耐inistry of Steel U O N0 2(10)ノ2016-TD dated 20 02 2018
-2デ9-
赫

坪ヨ
…
Government of lndia
Ministry of Steel
Technical Division
## Subject: Ratification of norms in terms of Para 4.7 of HBP (VolJ) of
Authorization (AA) No 5610005138 dated 11.05.2017 - M/s National Steel & Agro
lndustries Limited; lndore.
DGFT may refer to the UO Note No 011811501236tAM-18/DES-lt/26 dated
01 .08.2017 whereby the request of M/s National Steel & Agro lndustries Limited;
lndore was forwarded to Ministry of Steel for ratification of the above mentioned
Advance Authorization.
The aforesaid case for ratification of Advance License has been examined in
the Ministry of Steel based on the quantity exported by the applicant against the
aforesaid AA. The required quantity of items of import has been calculated is per the
revised norm published by DGFT vide pN No 33(RE:2012)tzo09-2014 dated
30.11.2012. However, NC decided that that the quantity required for per tonne of
export product may be given instead of total quantity. Accordingly the required import
quantity to be allowed for per tonne of export product has been calculated as per the
aforesaid Public Notice and enclosed herewith for consideration of Norms
Committee.
rhe)A_
(S:FCB:6-atn;ga0
Deputy lndustrial Adviser
Telefax: 011-23062490
!,rlcl: as above
V Shri Vinod Kashyap, FTDO, DGFT, UdyogBhawan, New Delhi.
じ
筒
“
鄭
_
ViNO●
“
tl“ AR lr^311VA,
0,ii:1lilliilil:l:lil
_“
″
■ ⌒

S:。No
Advanced
Authorisation
No. & Date
Description of ltem of Export
Quantity
of Export
MT
Thickness
(MM)
Zinc
Coating in
(gms/m2)
Quantlty of:nput perton of export product
Hot Ro‖ ed
A‖ oy Steel
Sheets′
Strips′ Wide
Coils of
re:event
orade rMT〕
Zinc in ingOt
fonn(Kg)
Aluminium
Si!icon A!:oy
Slab′ lngot
(Kg)
Ro‖ ing
M‖ IRo‖ s
(Kg)
Ro‖ing
Oi:(Kg)
Pickling
Oil(Kg)
VC:
Rusto‐
Paper
(Sq
Metre)
Guard
Film (Kg)
App‖ cato
r Ro‖ s
(Kg)
Primer
(litre)
Backer
l■re)
Top Coat
O■re)
1
5610005138
dated
l1052017
Cold Ro‖ed Zlnc and Aluminium―
Silicon A‖ oy
188072
(Plain/Corrugated) having coating thickness of
Primer 4-1 0 Micron, Backer 4-14 Micron and
Top Coat 12-28 Miqon, Tickness ranging from
0.10 to 1.62 mm, Zn-Al-Si coating range from 40
239 gms/m2.
10640
025C
2164
2811
125
045
2477
013
1705
3031
17779
028C
104
1905
2474
125
035
045
500
217e
013
1241
1496
2659
14907
0320
150
1702
221
125
035
045
1935
013
1105
1332
2368
0320
103
242C
3143
125
045
500
1935
013
1105
1332
2368
25179
0340
104
2183
2835
035
1744
013
1201
2135
5408
0350
106
1537
1997
035
045
50C
1744
013
996
1201
213[
15164
0400
1825
2371
035
045
1457
832
1003
1783
2572C
045C
105
2024
035
1346
769
927
1647
2599
047C
145
2355
3059
125
035
045
500
1251
714
1531
15754
050C
1037
1347
125
035
500
1169
667
804
1430
23145
0500
160
1756
2281
035
500
169
667
804
1430
ヽ
「
‐
ヽ|

モ要七二〕γ
Government of lndia
Ministry of Steel
Technical Division
SubieCt:Ratification of norms in terms of Para 4.7 of HBP(Vo卜:)。f Advance
Authorization(AA)No 5610005140 dated 18.05.2017‐
Mノs National Steei&Agro
industries Limited;:ndore.
DGFT may refer to the uO Note No 01/81/50/237/AM‐
18ノDES― |1/66 dated
15 02 2018 whereby the requisite information received from M/s Nationai Steei &
Agro industries Limited;indore was fOn″arded to Ministry of Steelfor ratificalon of
the above mentioned Advance Authorization
roduct is covered under SK)N C 473 of
ntity of zinc has been calculated as per
Hot Ro‖ ed A‖ oy Steel sheetsノstrips/wide
ased On content basis as per SK)NC-473
The quantity of items of import tO be a‖ owed under the aforesaid AA has been
calculated for per tOnne Of expOrt product in the Excei sheets enclosed herewith for
consideralon ofthe NORMS Commltee
SrQ
(S.K.Bhatnagar)
Deputy lndustrial Adviser
Telefax: 011-23062490
Encl: as above
v 
-S.hr! Vino_d Kaqhyap, FTDO. DGFT. UdyogBhawan. New Dethi.
Ministry of Steel U.O.No. 2(6)
に
´ るZ´
⌒

SI No
Advanced
Authorisation No. &
Date
Description of ltem of Export
Quantity of
Export MT
Thicknes
S(MM)
Zinc
Coating
in
(gms/m2)
Quantity of lnput per ton of export prorluct
Zinc (Kg)
Hot
Ro‖ ed
A‖ oy
Steel
Sheets′
Strips′
Wide
Coils of
relevent
grade
RoI‖ ng
Mill Ro‖ s
(Kg)
Ro‖ ing
Oil(Kg)
Steel
Strapping
(K9)
1
5640005140 dated
18052017
Cold rolled Galvanized/
Galvannealed (Plain/Corrugated)
Alloy Steel Sheets/stripsAwide
coils of relevent grade having
thickness 0.14 mm to 1.50 mm
and having Zinc coating 70 - 100
gms/m2
1969035
53078
014
70
7444
1,03481
125
035
200
9930
014
80
7441
1,03481
125
035
200
149216
014
90
9589
1,01079
125
035
200
208118
015
90
8943
1,01802
125
035
200
45458
016
80
6505
1,04527
125
035
200
188540
018
60
4120
1,07194
425
035
200
53614
018
70
5778
1,05340
125
035
200
160726
018
80
5778
1,05340
125
035
200
79546
018
90
7441
1,03481
425
035
200
52768
025
70
4153
1,07457
125
035
200
494448
025
90
5346
1,05823
125
035
200
185446
026
80
3706
1,07657
125
035
200
80134
027
60
2644
1,08844
125
035
200
26638
032
100
4045
1,07278
125
035
200
131610
043
100
3101
1,08333
125
035
200
79765
150
100
914
1,10778
125
035
200
ｌ
ｎ
ｐ
ｔ
゛
厳
即
…
V,NO●κυ
“
AR KA●|IVAP
―
●■口ぃ
“
|・l゛,●|コ●‐面
●●●●|●●
17●●●●0・●●|●p‐ ●●|,0'輛●●●
覇陽:眠陽irF〕J秘=
・゛り■甘=記彗
・rt==諄:h.
0       (
く｀

52
tg_65-26t+
I
No:7/ee/77/rs I l{
Minisuy of Commerce & tndustry
Department of Industrial policy & promotion
flechnical Support)
Udyog Bhawan, New Delhi
Dated, the{May,2018
OFFICE MEMORANDUM
Subiect: Ratification of norms in respect ofAA No, 0410163279 dt.27.6.17 issued
to M/s Siechem Technologies private Limited.
Ref: DGFT. U.O, No.01/81/50/00238 / AM-LB /DES-Z / 642 dated 1.05.2018
The instanr AA N o. 0410163279 dt. 27 .6,1j may be ratified as under:
(D 
Quantity of import items at Sl. Nos. 1 and 2 for the export items at Sl Nos.
1 to 14 [Control Cable (Copper Conducror)] may be illowed as per SION
C248 [Engineering Table 5) or as applied foi whichever is less.
(iD Quantity of import items at sl. Nos. 1 and 2 for the export items at sl Nos.
15 to 19 [Solar Cable/ Solar (Copper Conductor]] may be allowed as per
SION CZ70 (Engineering Table 6l or as applied foi whichever is less.
(iii) The Import items should be of ielevant grade, size and specifications as
contained in the respective Eps. Net content of above input in the el w i
be as certified by jurisdictional GST Authorities.
(iv) Department of Heavy Industry may ue ror ttie export items at sl Nos. 20 to
29 [Automotive Cable (Copper Conductor)].
l\
uA\
lsuriaeelcnaunan;
Development Officer
To
Directorate General of Foreign Trade
(Sh. Vinod Kashyap, FTDO)
Ⅵ蝙
AP
_64″

53
F.No. 712912018-T3
Ministry of Commerce & Industry
Department of Industrial Policy & Promotion
(Technical SuPPort Section)
Udvos Bhawan, New Delhi
Dated, thI 16th March,2018
OFFICE MEMORANDUM
## Subject: Ratification of norms in respect of Advance Authorisation No.
0310814293 dated 28.06.2017 issued to M/s Polycab Wires Pvt. Limited
Ref: DGFT U.O. No. Oll8ll50l278lAM-18/DES-2/315 dated 11.09.2017
1.
Advance Authorisation may be ratified as under:
Description, sizes, quantities and net weight of export items at Sl. No. | & 2 under
the Advance Authorization may be specified as per enclosed Annexure'
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as
1.01 Kgs./Kg. content in the export items at Sl. No. | &.2.
Quantity of import item at Sl.No.2 i.e. Aluminium Ingot may be allowed as
1.01 Kgs./Kg. content in the export items at Sl. No. | &2.
Quantity of import item at Sl. No. 3 i.e. LDPE Compound may be allowed as 1.05
Kgs.lkg content in the export items at Sl. No. | &,2.
Quantity of import item at Sl. No. 4 i.e. PVC Resin may
Kgs./Kg. content in the export item at Sl. No. 1.
Quantity of import item at Sl. No. 5 i.e. PVC Plasticizer
Kgs./Kg. content in the export item at Sl. Nol .
be allowed as
l5'o $ ,"F
1.05
2.
3.
4.
5.
6.
7.
8.
may be allowed as 
1.05
Quantities of import items at Sl. No. 6 to 13.( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 3.
Import item at Sl. No. 14 i.e. Wooden Cable Drum may be allowed as per packing
policy
Norms committee may take a view
To
(Sh. Vinod Kumar Kashyap, FTDO, DES-ID
Udyog Bhawan, New Delhi.
*w_*
(S. K. Jain)
Development Officer
Tele : 2306 3166
-$5-

EXPORT ITEM L:ST(ADVANCE AUTHORISAT10N NO.0310814293 DT.28.06.2017
一
|`′ '1レ
,・
ⅥhAP
II戦職:構鮮乳
・l…
 
…
,・
“
J・・●●
|● JC■
"●
●
…
■″
u=智■鵡
=■rt彙」L,",
Ｌ
　
α
Ｓ
Ｎ
size a type of Cables
Qty(MTRS) Totat Cable wt
(MT⇒
1
Copper Cond.XLPE!nsulated PVC Sheathed Al.Wire Armoured Cabtes Betow 1000 V.
101
1 Core X 120 Sq.MM
7500
10.275
1 02
l Core X 240 5q.MM
9000
24.210
2
Cond XLPE lnsutated ZHFR Sheathed At Wire Armoured cables Betow 1000 V
201
1 Core X 240 Sq./WVl
9000
24210
202
1 Core X 240 Sq.lrl/Vl
6000
16.140
_る
`´

⌒
議メ
F.No. 712912018-TS
Ministry of Commerce & IndusttY
Department of Industrial Policy & Promotion
(Technical Support Section)
Dated, the 16th March,2018
OFFICE MEMORANDUM
## Subject: Ratification of norms in respect of Advance Authorisation No.
0310814274 dated 28.06.2017 issued to M/s Polycab Wires Pvt. Limited
Ref: DGFT U.O. No. 0ll81l50l279lAM-LS|DES-2/316 dated 11.09.2017
Advance Authorisation may be ratified as under:
Description, sizes, quantities and net weight of export items at Sl. No. I to 3 under
the Advance Authorization may be specified as per enclosed Annexure.
Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as
1.01 Kgs./Kg. content in the export items at Sl. No. I to 3.
Quantity of import item at Sl. No. 2 i.e. LDPE Compound may be allowed as 1.05
Kgs./kg content in the export items at Sl. No. 2 &3.
Quantities of import items at Sl. No. 3 to 10 ( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 3.
5. Quantity of import item at Sl. No. 11 i.e. PVC Resin may be allowed as
Kgs./Kg. content in the export item at Sl. No. 1.
6. Quantity of import item at Sl. No. 12 i.e. PVC Plasticizer may be allowed as
Kgs./Kg. content in the export item at Sl. No .1 .
Quantity of import item at Sl. No. 13 i.e. Galvanised Steel Wire may be allowed as
1.02 kgs/kg content in the export items at Sl. No. 2 & 3.
Import item at Sl. No. 12 i.e. Wooden Cable Drum may be allowed as per packing
policy
1.
Norms committee may take a view
To
(Sh. Vinod Kumar Kashyap, FTDO, DES-ID
Udyog Bhawan, New Delhi.
2.
3。
4.
7.
8.
1.05
1.05
. 
-',--
-/ 
--t 
--
./s - 
T 613)tzt
7 
(s.K. iain;
Development Officer
Tele : 2306 3166
優
Ⅵ駐語鳳
A,
H‐■
,■■留IF《■弩:I「ぜ
_も1″

⌒
EXPORT ITEM LiST(ADVANCE AUTHOR:SAT10N N0 0310814274 DT.28.06.2017
lι ′
`12)′
ァ
Sr No
size a type of Cables
Qty(MTRS)
Totat Cabte wt
(MTS)
1
Copper COnd PVC:nsutated PVC Sheathed Unarmoured Cables Betow 1000 V
1 01
1 Core X 500 Sq.M/\,\
1200
6096
Copper Cond. PE lnsutated PE Sheathed Armoured Cabtes Betow 1000 V.
201
2 Core X 1.5 Sq.lWU
21000
4158
202
4 Core Xl.5Sq MM
21000
5313
203
2 Core X 2.5 Sq.MlV\
42000
10542
Copper Cond.XLPE lnsutated ZHFR Sheathed Armoured Cables Betow 1000 V
301
3 Core X 150 Sq.l'!V\
1000
6030
302
3 Core X 150 Sq.lvVVl
1000
6030
_ろζ″

^
5e
lg-szol€
F.No. 712912018-T3
Ministry of Commerce & Industry
Department of Industrial Policy & Promotion
(Technical SuPPort Section)
Dated, the l6th March,2018
OFFICE MEMORANDUM
## Subject: Ratification of norms in respect of Advance Authorisation No.
0310814294 dated 28.06.2017 issued to M/s Polycab Wires Pvt. Limited
Ref: DGFT U.O. No. 011811501281/AM-18/DES-2/318 dated 11.09.2017
Advance Authorisation may be ratified as under:
1. Description, sizes, quantities and net weight of export items at Sl. No. I to 16 under
the Advance Authorization may be specified as per enclosed Annexure.
2. Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as
1.01 Kgs./Kg. content in the export items at Sl. No. 1 to 8, 10, 11, 13,14 & 16.
3. Quantity of import item at Sl.No.2 i.e. Aluminium Ingot may be allowed as
1.01 Kgs./Kg. contentintheexportitems atSl.No. 6,7,912,13 & 15.
4. Quantity of import item at Sl. No. 3 i.e. LDPE Compound may be allowed as 1.05
Kgs./kg content in the export items at Sl. No. 1,2,3 & 6 to 16.
5. Quantity of import item at Sl. No. 4 i.e. Semi Conducting Compound may be allowed
as 1.05 kgs/kg content in the export items at S1. No. 6, l0 &. 12 to 15.
6. Quantity of import item at Sl. No. 5 i.e. PVC Resin may be allowed as 
1.05
Kgs./Kg. content in the export items at Sl. No. 1, 3,4,5,9, 11, 12,14 &.15.
7. Quantity of import item at Sl. No. 6 i.e. PVC Plasticizer may be allowed as 
1.05
Kgs./Kg. content in the export item at Sl. No . 1,3, 4, 5, 9, ll , 12, 14 & 15.
8. Quantity of import item at Sl. No. 7 i.e. Copper Tape may be allowed as 1.01 Kgs./Kg.
content in the export items at Sl. No. 6,l0 & 12to 15.
9. Quantity of import item at Sl. No. 8 i.e. Galvanised Steel Wire may be allowed as
1 .02 kgs/kg content in the export items at Sl. No. 1 , 8, 9 to 12, 14 & 1 5.
10. Quantities of import items at Sl. No. 9 to 16.( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export items at Sl. No. 7,
8, 10 & 13.
11.Import item at Sl. No. 17 i.e. Wooden Cable Drum may be allowed as per packing
policy
Norms committee may take a view
′
  'ヽ
(S. K. Jain)
Development Officer
Tele : 2306 3166
To
(Sh. Vinod Kumar Kashyap, FTDO, DES-II)
Udyog Bhawan, New Delhi.
_31″

ADⅥNCE AUTHO劇SATONttLEN0 03Ю y010100138FAM8
ADVANCE AUTHOR SAT10N N0 0310814294 Dated 28 06 2017
Si No
Size & type 0f Cables
Qty(MTRS)
Total Cable wt (MTs)
ICOpper cOnd XLPE insulated PVC lnner Sheathed and MDPE Outer sheathed Armoured Cab es Be ow 1000 V
3 Core X 25 Sq MM
2
Copper Cond PE Insulaled and Sheathed Armoured Cab es Below 1000 V
4 Core X 2.5 Sq.t/M
7968
2Core X15 Sq MM
21000
4158
4 Core X 15Sq MM
7590
204
4 Core X 2.5 Sq.MM
39000
12948
3
Coppe「gond xLPE nsulated PVC Sheathed unarmOured Cab es Below
1000V
l Core X4 Sq MM
0067
302
l Core X6 Sq MM
1000
0089
l Core X 10 Sq MM
2000
0260
1 Core X 16 Sq.MM
0370
l Core X 25 Sq,MM
2000
0560
1 Core X 35 Sq.i,4[4
0750
4 Core X 50 Sq MM
2000
0980
l Core X 70 Sq MM
0345
l Core X 95 Sq MM
0235
l Core X 120 Sq MM
0293
1 Core X 150 Sq.[4M
0360
l Core X 185 Sq MM
250
0448
l Core X 240 Sq MM
0583
4
Copper Cond. PVC lnsulated PVC Sheathed Unarmoured Cables Below 000V
J COre X 10 Sq MM
10300
1494
l Core X 16 Sq MM
10300
2112
l Co「e X25Sq MM
10300
3193
404
2 Core X15 Sq MM
0465
2Core X25 Sq MM
0580
2 Core X4 Sq MM
5000
0965
2 Core X 6Sq MM
1 125
5
Copper Cond. PVC lnsulated LJnarmoured Cables Betow tOO0 V.
,Core X l Sq MM
0280
l Core X15 Sq MM
102000
l Core X25 Sq MM
102000
3264
l Core X 4 Sq MM
30500
1403
J Core X 6 Sq MM
1 983
l CoЮ Xlosq MM
10300
J COre X 16 Sq MM
6200
1023
6
測Cond Covered wilh semi Cond cOmp XLPE lnsulated CU VVire Screened wlh cu Tape MDPE Sheathed una「
mOured
CaЫ es ll KV
3 Core X 300 Sq MM
6000
31740
7
Copper cOnd xLPE insulated ZHFR Sheathed AI W re Armoured cab es Below 1000 V
'Core X 800 Sq MM
1000
8700
8
Copper Cond XLPE nsu ated zHFR Sheathed Armoured Cab es 8elow l
000V
3 Core X 150 Sq MM
1000
3 Core X 150 Sq MM
6030
9
AuminumCond xLPElnsulatedPVcsheathedArmouredcablesl100V
4 Core X35Sq MM
5000
5280
4 Co「e X25Sq MM
5000
4330
3 5 Core X 185 Sq MM
16885
35 Core X 35 Sq MM
0140
4 Core X 16 So MM
0094
CU Cond Covered with Semi Conl COmp XLPE Insu ated CU Tape ZH!
=R Sheathed Armoured Cables ll KV
1001
3 Co「e X95Sq MM
1000
6400
1002
3 Core X 95 Sq MM
2000
12800
90ppe「Cond XLPE Insu ated PvC Sheathed Armoured cab es lloO V
41 01
Core X 2 5 Sq MM
2450
0884
´
オ
r`,3′ し,t

／
ブ
^
1450
0906
11.02
19 Co「e X2.5Sq MM      _
0673
11.03
0312
11.04
14 CoF3又2.5 Sq.MM
,6ra.t \r,irh Qomi cnna Comn XLPE lnsulated CU.Tape PVC Sheathed Atrnqqlgq lables 11 KV'
3 CoさX%Sq.MM
3999
3999
12.01
Ou Cond COVeredWtth SemiCond m
3000
14.250
13.01
じore ttZluu bq.IⅥⅣ
l
Sheathed A'ry"g! !'bffi
22230
3じo「e入lzU bql型
Yt DE tnerrlalpd Ct I Taoe PVC Sheathed Armoured Cables 33 KV
13.203
15.01
∞pptt COndudor XLPE lnsttded MDPE Ottg Sheamed una
1        56.487
2Core X6Sq Ш
7066000
1.978
16.02
じore入lU bq,MM
``′
3'し'`
″レ1/

F.No.7/29/2018‐ TS
hp帯丑∬舗I蝋瀞面
m
3.
4.
5.
7.
8.
Norms committee may take a view
To
(Sh. Vinod Kumar Kashyap, FTDO, DES-II)
*Hffi
1為
尾
Dated, the l6th March. 201 8
OFFICE MEMORANDUM
## subject: Ratification of norms i*.tp..t
of Advance Authorisation No'
0310814303 dated 28.06.2017 issued to M/s Polycab wires Pvt' Limited
Ref: DGFT U.O. No. Oll8ll5ol282/AM-18/DES-2/319 dated 11.09.2017
Advance Authorisation may be ratified as under:
1. Description, sizes, quantities and net weight of export items at Sl' No' 1 to 8 under
the Advance Authorization may be specified as per enclosed Annexure'
2. Quantity of import item at Sl.No.l i.e. Copper Wire Rod may be allowed as
1.01 Kgs./Kg. content in the export items at Sl. No. I to 8.
Quantity of import item at Sl. No. 2 i.e. LDPE Compound may be allowed as
1.05 Kgs.lkg content in the export items at Sl. No. 1 to 8.
euantily oi import item at Sl. No. 3 i.e. PVC Resin may be allowed as
1.05 Kgs./Kg. content in the export items at Sl. No. 1 to 6'
euantiiy of import item at Sl. No. 4 i.e. PVC Plasticizer may be allowed as
1.05 Kgs./Kg. content in the export item at Sl. No . 1 to 6.
6. Quantities oi i*port items at Sl. No. 5 to 12 ( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydioxide) may be allowed as 1.05 Kgs./Kg. content in the export items at Sl. No. 7
&8.
Quantity of import item at Sl. No. 13 i.e. Glass Mica Tape may be allowed as
1.02 Kgs./Kg. content in the export items at Sl. No. 9, 5, 6 &.7 .
Quantity of import item at Sl. No. 14 i.e. Galvanised Steel Wire may be allowed as
1.02 kgs/kg content in the export items at Sl. No.1 to 6.
9. Import item at Sl. No. 15 i.e. Wooden Cable Drum may be allowed as per packing policy
(S. K. Jain) 
'
Development Officer
Tele : 2306 3166
_■2″

EXPORTITEM LIST(ADVANCE AUTHORISAT10N N0 0310814303 DT 28 06 2017)
Ⅵぶ1語T]器A,
1:__
I 6t t 1u,,
S「No
S ze&type Of Cab es
Qty(MTRS)
Total Cab e"t(MTs)
Copper Cond Covered wth C ass M ca Tape XLPE lnsu ated PVo Sheathed A「
moured Cab es Be ow 1000 V
2 Core X 4Sq MM
2
Coppe「Cond XLPE lnsulated PVC Sheathed Armoured Cables Below 1000 V
13 Core X 2 5 So MM
6100
6039
25 Core X 2 5 Sq MM
6250
10375
2Core x4Sq.VlV
21200
9010
3
Coppei Cond XLPE lnsulaled overa‖
Shielded PVC Sheathed Armoured nstrumentalon Cables Below 1000 V
5 Patt X 05 Sq MM
13665
5261
2 Pa「X05Sq MM
0743
303
20 Pal「X05Sq MM
18100
18643
lo Par x o5Sq MM
,7970
10782
l Pa「XlSq MM
Coppe「Cond XLPE lnsulated l&O Shie ded PVC Sheathed Armoured lnstrumentalon Cables Below 1000 V
5 Pa「X05Sq MM
21310
10229
402
10 Pair X 0.5 Sq.[4M
1673● ―
14890
2Par X15SqMM
1000
0460
5
Copper Cond Covered wlh Glass M ca Tape XLPE Insu ated lndlvidua and Overal Sh e ded PVC Sheathed´
こmoured Cbb es Below
1000V
5Par X 05 So MM
5408
502
10 Pa「X05Sq MM
7140
503
5T X15SqMM
5750
7073
10T X15SoMM
39597
6
Copper Cond Covered wlh Glass M ca Tape XLPE nsu ated Ove「a‖ Sh e ded PVC Sheathed Armoured Cables Below 1000 V
l0 Pair X 0.5 Sq.MN4
5250
4305
5Par X 05 Sq MM
2600
603
lParXlSqMM
23710
6757
lTX15SqMM
18000
6390
7
)opper Cond. Covered with Glass l\4ica Taoe XLPE lnsulated ZHFR Sheathed Unarmoured Cables Below 1000 V
'10 Pair X 0.5 Sq.MM
3500
1806
Copper Cond. XLPE lnsulated ZHFR Sheathed Unarmoured lnslrumentalion Cables Beiow 1000V
l Par Xl SqMM
1 141
´々ら′

5',7
{g-2aa
F.No. 712912018-T3
Ministry of Commerce & Industry
Department of Industrial Policy & Promotion
(Technical SuPPort Section)
Dated, the l6th March,2018
OFFICE MEMORANDUM
## subject: Ratification of norms in ...p..t of Advance Authorisation No'
0310814467 dated 05.07.2017 issued to M/s Polycab wires Pvt. Limited
Ref: DGFT U.O. No. O1l8ll5ol280/AM-18/DES-2/317 dated 11.09.2017
Advance Authorisation may be ratified as under:
1. Description, sizes, quantities and netweight of export items at Sl' No' 1 to 15 under
the Advance Authorization may be specified as per enclosed Annexure'
2. Quantrty of import item at 
-St.No.t i.e. Copper Wire Rod may be allowed as
t.Ot fgs.lKg. content in the export items at Sl. No. I to 4 & 6 to 15.
3. Quantity oi impon item at St.No.Z i.e. Aluminium Ingot may be allowed as
t.Ot fgs./Kg. content in the export items at Sl' No' 1,3, 5 & l5'
4. euantily oiimport item at St. No. 3 i.e. LDPE Compound may be allowed as
t.os rgs.ltg content in the export items at Sl. No. 1 to 4, 6, 8, 9, 11 & 13 to 15.
5. euantity of import iterir at Sl. No. 4 i.e. Semi Conducting Compound may be allowed
as 1 .05 kgs/kg content in the export items at Sl. No. 2 & 3 '
6. Quantity of import item at Sl. No. 5 i.e. PVC Resin may be allowed as
1.05 Kgs./Kg. content in the export items at Sl. No. 1 to 14.
7. euantity oi import item at Sl. No. 6 i.e. PVC Plasticizer may be allowed as
1.05 Kgs./Kg. content in the export item at Sl. No . I to 14.
8. Quantity of import item at Sl. No. 7 i.e. Copper Tape may be allowed as
content in the export items at Sl. No. 2 &3.
1.01 Kgs./Kg.
9. Quantity of import item at S1. No. 8 i.e. Galvanised Steel Wire may be allowed as
1.02 kgs/kg content in the export items at Sl. No.2, 4 &, 14.
10. Quantities of import items at S1. No. 9 to 16.( LLDPE, Aluminium Trihydrate. Silane
Coupling Agent, Perkadox, Anioxident, Calcium Carbonate, Calcined Clay, Magnisium
Hydroxide) may be allowed as 1.05 Kgs./Kg. content in the export item at Sl. No. 15.
11. Quantity of import item at Sl. No. 17 i.e. Lead Ingot may be allowed as 
1.01 kgs/kg
content in the export items at Sl. No. 3 & 14.
12.Import item at S1. No. 18 i.e. Wooden Cable
policy
Norms committee may take a view
Drum may be allowed as per Packing
,/ 
-te +-- 
'
?* 
r.rirfjet'l:';1
Development Officer
Tele : 2306 3166
To
(Sh. Vinod Kumar Kashyap, FTDO, DES-ID
Udyog Bhawan, New Delhi.
ソ駐語品
A,
_均4″

)  ｀
SCHEDULE OF CONSUMPT10N AND CiF VALUES OF RAW MATERIALS
ADVANCE AUTHORISAT10N FILE N0 03/95/040/00284/AM18
ADVANCE AUTHORiSAT10N N0 0310814467 Dated 05.072017
Armoured Cabtes 11 KV.
PVC a Lead Sheathed AL Wire Armoured Cables
１
一
●
１
Sr. No.
Size & type Of Cabtes
Qty
(MTRS)
Cable wt
(MTS)
1
Copper Cond xLPE lnsutated PVC Sheathed Al.Wire Armoured cabtes Below 1000 V.
101
l Core X 240 5q.MM
6000
16.140
1 02
1 Core X 95 Sq.lrlM
3000
3 390
Cond. Covered with Semi Cond. Com. XLpE lnsutated Cu. T
PVC Sheathed
201
3 Core X 150 Sq MM
3000
25290
Cu.Cond. Covered with Semi Cond. Comp. XLPE lnsutated Cu.Wire Screened with Cu. T
301
l Core X 240 Sq MM
19500
132210
4
copper Cond XLPE Insutated PVC Sheathed Armoured cabtes l100 V
401
4 Core X 16 Sq.MムA
1000
1.036
402
3Core X6Sq.M/V\
4000
2.0峰0
403
2 Core X 4 Sq.MM
０
０
０
０
0451
4.04
2 Core X 16 SqJttM
Ｏ
Ｏ
つ
ι
2242
405
4 Core X 300 Sq MM
500
6420
5
Aluminium Cond Pvc lnsutated Pvc sheathed Unarmoured Cables l100 V.
501
l Core X 70 Sq MM
10000
3860
502
l Core X16 Sq MM
9000
1341
6
Copper Cond. XLPE lnsulated pVC Sheathed Unarmoured Cabtes Betow 000V
601
4 Core X 2.5 Sq.lvlM
10000
2640
602
3.5 Core X 35 sq.MM
700
0966
´
t,3117

5100
3.611
603
3Coe X ttS畔″鵬
4Coe X6Sq…
3Coe X25S年Ⅲ
■5Coe X255年″V吼
3Coe X曖0舛Ⅳ鵬
4000
1.792
604
5200
4763
605
300
0324
606
2000
2402
607
1000
2543
608
900
3 294
609
900
5040
610
1000
7262
611
3500
3 101
6.12
1700
8835
6.13
3800
1 083
6.14
5300
1 950
615
3100
1 603
6.16
10000
2 220
617
4200
1 432
6 18
9200
77814
6 19
Ck^ヽ,卜‐Я lln,rmn‖ rρrl Cables Betow 1000 V
7
COppei COnd PVι  l::Sula[eu rv、コ‖じa ti:cu υ:,Ⅲ…
|‐ ―
う′^´^ Y'■
くn AAAA
1      3000      1
0.735
7.01
Dしυ:て ^4   !
11000
2.189
702
]coe XI.5Sq Ⅲ
1500
0.374
7.03
800
0.324
704
2500
0745
705
2500
1.253
7.06
2000
1 268
7.07
5000
3905
7_08
12500
1 450
709
15000
2625
710
‐
，
→
薫動,ルメロノ
)   ′

COnd XLPE Insutated Pvc sheathed Tinned
Braided Unarmoured Cabtes
801
3 Core X25Sq MM
500
0548
802
3 Core X 50Sq MM
400
0:718
803
]Core X 70 sq.MM
1 550
11422
804
3 Core X 95 SqJハM
500
1.693
805
0し0「e入lZυ bq.MM
350
1 443
806
3 Cgre X 150 Sq.MM
800
4.037
807
5 ιore 入loD 5q.MM
1000
6215
808
主｀。
「e ttz4u bq MM
1000
6215
809
lCOre X 300 Sq.油M
600
5890
9
[
Lopper Lond. XLpE lnsutated pVC Sheathed Unarmotlre.l aahla( Ral^w l rYln t,
901
J COre X 500 Sq MM                                     I
11500
54.499
10
しond Pvc insutated l a O Shietded Pvc Shea fhed I lnrrmnlr-.| r^.+-,-
1001
2 Pair X o.5Sq MM
6000
0690
1002
D rd:「 入υ obq MM
3500
0753
tOnd XLPE Insutated Overalt Shielded Pvc s「leathpd G ( Wir6 Ar.i/i6^ .-Lt
1101
7 Core Xl sq MM
1200
0378
12
しopper cond Pvc:nsutated unarmoured cabtes Belo w1000V
12.01
l COre X 6 SqJttM
400
0026
12.02
| しore 入lo bq.MM
400
0066
1203
1、ore tt Dυ ゝq MM
300
0148
1204
|ヽore 入]ゝq MM
4800
0.082
1205 l Core X1 5Sq.MM
75400
1 659
1206
l COre X 2.5 Sq.MM
2000
0064
12.07
| しOre 入4ゝq MM
6400
0294
1208
l COre X 6 Sq MM
4000
0260
ｌ
ｒ
゛
―
Betow looo v
Cables Betow 10oo v
Below looo v
′
~希
′角_′
′
‐  ｀

Cables Below 1000 V.
１
ご
い
、
ノィ2-´■予寺11_′′
レ
60000
1.920
12.09
i cOre X 2.5 5qoMM
pvr sheaIit"-a U n -o ttn o u re d I ns t ru m e ntati o n
13
30pper Cond.ビLI
2 Pair X l Sq.MM
4 Pair X l SqoMM
3 T Xl SqoMM
10T XlSq.MM
_月(h‐ ハヤl
1200
0。265
13.01
700
0.230
13.02
4000
1.344
13.03
500
0.474
13.04
,rmorrred Cabtes Bt〕low 1000 V
14
1
Led ZHFR Sheathed Al.Wir
1 500 1
0。975
14.01
1000
1.680
14.02
720
0.842
14.03
7070
14.918
14.04
14225
15.790
14.05
Armor rred Cabte: Betow 1000 V
1     10500
1     34.787
15.01
10500
34.787
15.02
)

5Z
t9 s-10,8
No:7/257/77/rSW l't
Ministry of Commerce & Industry
Department of Industrial Policy & Promotion
(Technical Support)
Dated, the UApril, 2018
OFFICE MEMORANDUM
subiect: Ratification of norms in respect of AA No. 0310814496 dt 06.07,zor7
issued to M/s Sterlite Power Transmission Limited.
Refi DGFT . U.O. No.01/81/5 0 / ZB3 / AM-78 / DES-Z / 3ZO dated 1 1.9.20 1 7
Export Products (EPJ: Aluminium conductor Steel Reinforced and All Aluminium
Alloy Conductor
The above AA may be ratified as under:
Import Items:
til 
Item 1, 2 and 3 may be allowed as per SION C7.
(iD Item 4 may be allowed as 2o/o of FdB value of Ep at Sl No. 1.
(iiD ltems 5, 6 and 7 may be allowed as per C1394.
(ivJ These import items may be allowed as per the above-referred SI0Ns or as
applied for, whichever is less.
(v) 
Import items should be of relevant grade, size, thickness, diameter as
contained in the Ep. Net content ofabove inputs in the export product will
be as certified by iurisdictional GST Authoriiies.
2. This issues with the approval ofTechnical Adviser (BoilerJ.
[Sundeep ChauhanJ
Development Officer
Tel: 32 00
To
(Sh. Vinod Kashyap, FTDOJ
_hq-

⌒
`5
-lレ
恥
ptti為解蹴脚蝋♂
,nt oflndustrial Policy』L Promoltion
tTeChnical Supportl
Udyog Bhawan,New Delhi
Dated,the23April,2018
0FFICE MEMORANDUM
SubieCt:RatirlcatiOn of norms
issued tO M/S Welspun Corp Ltdin reSpect of AA No.3410043485 dt.■
9,09.2017
L
Ren DGFT U O No.01/81/50/00390/AM‐ 18/DES-2/433 dated 29.コ1.2017
Export Products〔EP):Non
出ckn“s Non ttoy■edl川
°y'dЫ
¨k Rpe輌ぬ3LPE
BlackPipeandNonA1loySteelBelC°
ating Of 1 80mm
Sleeve Coating
nd with Heat Shrink
The above AA mayヒ)e ratifled as under:
Importltems:
〔i)  Importitem l,2,3a
〔
ii〕 These importitems nd 4 may be allowed as per S10N C1289
may be a1lowed as perthe above― lreferred S10Ns or as
applied for, whichever is less.
(iiil Import items should be of relevant grade, size
contained in the EP. Net content of above inputs
certified by iurisdictional GST Authorities.
To
(Sh. Vinod Kashyap, FTDO)
and speciflcations as
in the EP will be as
Development ofncer
Tel:3200
Ⅵ論
P
″ゞつ´

'70
| $-o.F2ol?
F.No.7/103/2018-TS
Ministry of Commerce & Industry
Department of Industrial Policy & Promotion
(Technical Support Section)
Dated, the 14th March,2018
OFFICE MEMORANDUM
## Subject: Ratification of norms in respect of Advance Authorisation No. 0310816787
dated 03.11.2017 issued to M/s Oetiker India Pvt. Limited
Ref: DGFT U.O. No. 0ll8ll50l49llAMl8/DES-2/555 dtd. 23.01.2018
Advance Authorization may be ratified as under:
1. Import items at Sl. No. 1 to 4 shall be of relevant grade as contained in the
export products.
2. Quantity of import item at Sl. No. I may be allowed as applied for i.e.
1,0;.0.00 Kgs. as^ 1.072 Kgs. lKg. in the export product at Sl. No- i after taking
U J recovery rom scrap.
3. Quantity of import item at sl. No. 2 may be allowed as applied for i.e.
?9;9.00 Kgs. as^ 1.072 Kgs.iKg. in the export product at Sl. No. 2 after taking
UJ recovery mom scrap.
4. Quantity of import item at Sl. No. 3 may be allowed as applied for 72000
5,q:; ur 
^ 
1.074 Kgs./Kg. in the exporr product at Sl. No. 3 after taking
Lt5 recovery rom scrap.
5. Quantity of import item at Sl. No. 4 may be allowed as 9023 Kgs. as
1.173 Kgs./Kg. in the export product at Sl. No. 4 after taking l/3'd reclovery
from scrap.
Norms committee may take a view
, 
+--
(S. K. Jain)
Development Officer
Tele : 2306 3166
To
(Sh. Vinod Kumar Kashyap, FTDO, DES.ID
Udyog Bhawan, New Delhi.
tf-Y
ffiq gnvn rrtt
vrt{oo xuilAR xaSHYA2
fttl'l 
tailrttt l?turn 
rDrr{t
Far.rg6 Y.raG g.val.raanl 
Ott..a,
ftin 
q.{r 
rilrfilatrtfrrr
oar.aaaitL 
o..at.l 
., ra.aaan Vtada
arFlrtr 
fiiqtnrooe{ 
e. C.ot..-'e!'
irrtl.r 
rq< 
r{ 
ftrcd
urwoc 
Bhiwr^. 
Xcs 
aalltt
_(t-

Government of lndia
Ministry of Steel
Technical Division
## Subject: Ratification of input-output norm in terms of Para 4.7 ol HBp (Vo!) of
Advance Authorization No 3410043635 dated 14.11.2017 of M/s China Siee!
Corporation lndia Pvt Limited, Vadodra.
DGFT may refer to their UO No O1t81t5Ot486lAM-18/DES-2t52 dated
23.01.2018 whereby the applications of AA of M/s China Steel Corporation lndia
Pvt Limited, Vadodra has been forwarded to Ministry of Steel for comments/views.
ln the above connection, it may be noted that the applicant has applied for
import of 599.55 MT silicon electrical steel of CR full hard'unannealed wide coils
width of 600 mm or more grade 65c 1000, thickness 0.30 mm - 0.75 mm and
2199.75 MT Silicon electrical steel of CR full hard unannealed wide coils width of 600
IT or more grade 50C 470C, thickness 0.30 mm - 0.75 mm against export of 571
MT flat rolled product of silicon electrical steel non grain oriented width of 600 mm or
more grade 65C 1000 thickness 0.300 mm 0.750 mm and 2095 MT flat rolled product
of silicon electrical_steel non grain oriented width of 600 mm or more grade SgC
470C thickness 0.30 mm - 0.75 mm.
ln view of the above, Ministry of Steel recommends the wastage @ 3% on
iTpgtt of prime quality Non Grain Oriented Silicon Electrical Steel of Cotd Rolled Full
Hard Un-Annealed Wide Coils, Width of 600 MM or More, Grade 65C1000 and
50C470C, Thickness 0.3 MM to 0.75 MM against export of Flat Rolled product of
Non Grain Oriented Silicon Electrical Steel, fully processed ( uncoiling, welding,
cleaning, annealin-g, coating, bending & cooling arO'diuiding ,nO recoilingJ, wiOth 6f
600 MM or more Grade 50C 470C ano osCtooo tnicfnesJo.3 MM to 0.75 MM.
@g=l
(S.K.Bhatnagar)
Deputy lndustrial Adviser
shri vinod kashayap, FTDo, DGFT, Udyog Bhawan, New Delhi.
vrt
f-+
.. Et-o Fqlr Trq!
''ffi
- 5L'

#:;,o
No:7/31/2018/rsw / f-3
Ministry of Commerce & tnd[stry
Department oflndustrial policy & promotion
flechnical Support)
Dated, the 3 ffi!zora
OFFICE MEMOMNDUM 
O
subiect: Ratification of norms in respect of AA No. 031o817ogg dL 1rs.l1,..zoi.:T
issued to M/s Man Industries (India) Lld.
Ref: DGFT . U.O. N o.0 7 / I L / S o / agBlAM - 1BlD ES- Z / 5 48 dared Z3J2OLa
_Export Products (EpJ:-Alloy Sreel Submerged Arc Wetded pipes with 3 layer
Polyethylene Coating of 3.5mm thickness.
The above AA may be ratified as under:
Import Items:
(D 
Item 1, 2, 3, 4, 5 and 6 may be allowed as per SION C1292.
(iil 
These import items may be allowed as per the above-referred SIONs or as
applied for, whichever is less.
(iii] Import items sho_uld be of relevant grade, size and specifications as
contained in the Ep. Net content ofabove inputs in the export proar.tr,vitl
be as certified by jurisdictional GST Authoriiies.
2. This issueswiththe approval ofTechnical Adviser (BoilerJ. 
h
vt/\J
(Sund6ep Chauhan)
Development Officer
Tel: 3200
To
(Sh. Vinod Kashyap, FTDOJ
v4--
k 
grfi -rm
VINOO I(UTAR XAIXYAI
liE- 
oit r fi6tu dt-i{t
F.r.ra^ ir.a. (E!.r.a
Eia rr ar,r. 
.rrrFra'rrGn
oir..b.t 
oi..'.r 
ar r....|,n tr..r.
.,'Fra 
lt{r'l/aop(
s..t.r {<r 
{!, riF l
t -w-c Ahr*.^ 
Da.w Ocrhr
-56′

¬3
一
Mm.肌総脇ll:`TIdls島し
Departinent Oflndustrial P01icy`L Promotion
〔TeChnical SupportD
Udyog Bhawan,New Delhi
OFEICE MEMORANDUM    ated'the`1を1,12018
1:itttLl:躙11lMs:lよ二
illilillilt°
fAA NQ 0310817152 dt 201■2017
Rei DGFT U.O No01/81/50/499/AM‐
18/DES‐ 2/549 dated 23.12018
ExpOrt Products〔EP〕:Alloy Steel Submerged Arc Welded Pipes with 3 1ayer
Polyethylene Coating Of 3 5mm thickness.
The above AA Inay be ratifled as under:
Importitems:
出芽鳳雲
'∴l鑑Ⅲぶ瑚鷺繍∬ゼ鮮魚l盟
ittI罵
of AA No 0310808762 date(
27.122016
Thes.e _import items may be allowed as per the above_referred
SI0Ns/%wastages or as applied for, whichever is less.
Import items should be of relevant grade, size and specifications as
contained in the Ep. Net content ofabove inputs in the explrt product will
be as certified by jurisdictional GST Authoriiies.
〔
iii〕
(iV〕
2. This issues with the approval ofTechnical Adviser (Boilerl.
Development offlcer
Tel:3200
To
趣量1織椰
lgn Tra“
Ⅵ膠
P
」1繊難i臨
“
引●い●嗜 ―
"oo●
11 .`C‐ ●●'""●●●
_.v■,■躍躍
・rヽ風
"聾
`"`
-54-

ヽ
F.No. 2(61t2011-TW
Government of lndia
Ministry of Steel
Technical Division
## Subject: Ratification of norm in respect of Advance Licences No 0310g17207
dated 22.11.2017 - M/s Aesthetic Stamping & Lamination Limited, Mumbai
DGFT may refer to their UO No 01/81 tSOl4BslAM-1g/DES-2tgl dated
23'01-2018 whereby the above mentioned Advance Authorization of M/s Aesthetic
Stamping & Lamination Limited, Mumbai has been fonruarded to Ministry of Steel
for ou r comments/views.
Ministry of Steel recommends the import of Cold Rolled Non Grain Oriented
(CRNGo) Steel in coils form (Prime Quality) of relevant grade and allows wastage
1'015 Kg/kg against export of cRNGo Electrical steel slit coils subject to the
condition that width of imported coils is more than the respective width of export
products' The following amendment in the description of item of import and quantity
of import is recommended:
Description of
item of Export
Description of
item of import
0310817207
dated
22.11.2017
Electrical  steel
Slit COils.
CRNGO
Electrical Steel in
Coil form (Prime
Quality) 
of
relevant Grade. s2
(S.K.Bhatnagar)
Deputy lndustrial Adviser
"ゞ壬
/
Advance
Authorization
No and date

az
lgos)-ot1
No:7 /zs7 /17 /rsw //8
Ministry of Commerce & lridustry
Department of Industrial Policy & Promotion
(Technical Support)
Dated, the ldApril, 2018
OFFICE MEMOMNDUM
Subiect Ratification of norms in respect of AA No. 0310g18034 dt. 27.l2.ZO1-7
issued to M/s Sterlite Power Transmission Limited.
Reft DGFT. U.o. No.01/81/5 0 / 495 / AM-LB /DES-? /SSZ dated 23.1.2018
Export Products (EP): Aluminium conductor Steel Reinforced and All Aluminium
Alloy Conductor
The above AA may be ratified as under:
Import Items:
(D 
ltem 1, 2 and 3 may be allowed as per SION C7.
tiD Item 4 may be allowed as 2olo of FOB value of Eps at Sl No. 1 and 2.
(iiD ltems 5, 6 and 7 may be allowed as per C1394.
[iv) These import items may be allowed as per the above-referred SIoNs or as
applied for, whichever is less.
[vJ Import items should be of relevant grade, size, thickness, diameter as
contained in the Ep. Net content ofabove inputs in the export product will
be as certified by jurisdictional GST Authoriiies.
2. This issues with the approval ofTechnical Adviser (Boiler).
ISundeep ChauhanJ
Development 0fficer
Tel: 3200
lo
ISh. Vinod Kashyap, FTDO)
―b~6´