IN FORCE Norms Committee — Engineering (Gr A / NC-II) Advance Authorisation 2020-08-11

DGFT Committee Minutes

Document text

DIRECTORATE GENERAL OF FOREIGN TRADE - (DES II SECTION)

MINUTES OF THE NORMS COMMITTEE-II

MEETING No. 06/81-ALC2/2021 DATED 11.08.2020 (Held on 25.08.2020)

Please Note

i. For information of exporters, Norms Committee-II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80, 85. Communications in respect of cases/pertaining to NC-II may be sent to email address: nc2.dgft@nic.in
ii. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The concerned applicant/company may go through the same and respond accordingly.
iii. Similarly, a scanned copy of the blank Standard Deficiency Format, which may find a reference in NC decisions, has also been attached in the end. This may also be referred to by the concerned applicant/company and may be responded accordingly.
iv. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC.
v. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

Meeting No. 06/81 of Norms Committee-II for the year 2020-21 (Originally scheduled for 11.08.2020) held on 25.08.2020 through Video Conferencing under the Chairmanship of Shri R. P. Goyal, Additional Director General of Foreign Trade to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2015-20. The following members were present in the meeting:-

Sl. No.	Name & Designation	Department
1.	Shri K. S. Sodhi, AD (ME)	MSME
2.	Shri Devendra Kumar Saini, ADG	DoT
3.	Shri Sushil Kumar Jangid, Scientist „B‟	MeitY
4.	Shri Shaish Kumar, (TEC-1)	Consultant
5.	Shri V.C. Agarwal, (TEC-3)	Consultant
6.	Shri S. K. Bhatnagar, (SKB)	Consultant
In attendance
1.	Shri Shobhit Gupta, Dy. DGFT	DGFT

i. Draft Minutes of Meeting No. 05/81 scheduled for 16.07.2020 and held on 28.07.2020 were circulated among all the members of the Committee on 10.08.2020. On receipt of comments, the minutes were finalized and uploaded on DGFT‟s website on 17.08.2020. Therefore, the minutes are unanimously approved.

Minutes of the cases discussed in the meeting are as under:

1 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

MEETING NUMBER: 6/81-ALC2/2020 MEETING DATE: 11.08.2020

Case No.:1/23/81-ALC2/2017	Party Name: BHARAT	Meet No/Date:6/81-	Status:
	HEAVY ELECTRICALS	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0510250513
:01/81/050/00500/AM18/	:05/23/040/00041/AM10/	08.10.2009
HQ E-office Computer No.:
23265

Decision: The Committee considered the case as per the agenda and noted that Policy Interpretation Committee in its meeting held on 09.06.2020 has decided that such supplies would be admissible as deemed export and also eligible for Advance Authorization. Therefore, the Committee decided to fix the ad-hoc norms as per written comments given by DHI vide U. O. No.DES-2/BHEL/PEM-1-2019HEI-Part(4) email dated 07.09.2019. (Copy enclosed)

RA concerned may take suitable consequential action accordingly.

Case No.:7/21/81-ALC2/2017	Party Name: BERGEN PIPE	Meet No/Date:6/81-	Status:
	SUPPORTS INDIA	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410163738	Action By:
:01/81/050/00448/AM18/	:04/24/040/00153/AM18/	28.11.2017	Applicant

Decision: The Committee considered the case as per agenda and heard the representatives of the applicant during personal hearing held through video conferencing. The representatives explained the case in details and the Committee directed the representatives to furnish following information as per the advice of Consultant (TEC-3):

Item of import and its quantity, if there is any deviation from AA whether AA has been amended if so details thereof.
Drawing of export product.
Sl. No. 5 of the Standard Deficiency Format.
Drawing of components to be fabricated from each of imported raw material with calculation of wastage.
Plate/sheet layout with all dimension & calculation of wastage.

The case stands deferred.

3	Case No.:362/14/81-<br>ALC2/2018	Party Name: TRAFOMEC<br>INDIA PVT LTD	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/01080/AM19/	RLA File<br>:07/24/040/00296/AM18/	Lic.No/Date:0710112727<br>23.01.2018	<br>Action By:<br>DHI
	Decision:The Committee considered the case as per agenda and noted that a copy of applicant‟s reply<br>was forwarded to DHI via email dated 07.08.2020 for examination of the case. However, DHI<br>informed that the case is under examination. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of applicant‟s reply was forwarded to DHI via email dated 07.08.2020 for examination of the case. However, DHI informed that the case is under examination. Hence, the Committee decided to wait for the comments.

2 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:3/2/81-ALC2/2018	Party Name: ANGELS	Meet No/Date:6/81-	Status:
	ALUMINIUM	ALC2/2020	Deferred
	CORPORATION	11.08.2020
HQ File	RLA File	Lic.No/Date:0310819231	Action By:
:01/81/050/00008/AM19/	:03/94/040/00933/AM18/	19.02.2018	Applicant

Decision: The Committee considered the case as per agenda and heard the representatives of the applicant during personal hearing held through video conferencing. The representatives explained that 50% of their requirement has only been proposed for import and balance is to be procured 4 indigenously. However, it was not shown requirement of indigenous import in their application. Hence, the Committee directed the representatives to furnish following information as per the advice of Consultant (TEC-3):

To submit revise application and give complete details of export & import and indigenous inputs along with economic viability.
Process of manufacturing with stage-wise wastage.

Case No.:82/14/81-	Party Name: TRAFOMEC	Meet No/Date:6/81-	Status:
ALC2/2018	INDIA PVT LTD	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0710113216	Action By:
:01/81/050/00800/AM19/	:07/24/040/00011/AM19/	02.05.2018	Applicant

5 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the applicant on 02.03.2020 followed by a reminder on 20.05.2020 and 03.08.2020. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the applicant.

Case No.:5/10/81-ALC2/2018	Party Name: MODISON	Meet No/Date:6/81-	Status:
	METALS LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310822894	Action By:
:01/81/050/00486/AM19/	:03/95/040/00439/AM19/	07.08.2018	Applicant

6 Decision: The Committee considered the case as per agenda and noted that the second deficiency letter seeking certain information as raised by DHI was sent to the applicant via email dated 03.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

3 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:124/10/81-	Party Name: TBEA ENERGY	Meet No/Date:6/81-	Status:
ALC2/2018	(INDIA) PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:3410044397	Action By:
:01/81/050/00605/AM19/	:34/24/040/00146/AM19/	08.08.2018	Applicant

7 Decision: The Committee considered the case as per agenda and noted that the second deficiency letter seeking certain information as raised by DHI was sent to the applicant via email dated 03.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:378/14/81-	Party Name: TRUFORM	Meet No/Date:6/81-	Status:
ALC2/2018	TECHNO PRODUCTS	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:5010002501	Action By:
:01/81/050/01096/AM19/	:50/24/040/00027/AM19/	07.01.2019	Applicant

8 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant via email dated 03.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

The case stands deferred

Case No.:284/14/81-	Party Name: DISHA AUTO	Meet No/Date:6/81-	Status:
ALC2/2018	COMPONENTS PVT.LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310826973	Action By:
:01/81/050/01002/AM19/	:03/94/040/00976/AM19/	11.02.2019	Applicant

9 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of MSME:

To provide correct details as length and per unit weight details given in reply and in AA are not matching.

Case No.:298/14/81- Party Name: DELTA Meet No/Date:6/81- Status: ALC2/2018 ELECTRONICS INDIA ALC2/2020 Deferred PRIVATE LIMITED 11.08.2020 HQ File RLA File Lic.No/Date:0510409688 Action By: :01/81/050/01016/AM19/ :05/23/040/00504/AM19/ 18.02.2019 Section 10 Decision: The Committee considered the case as per agenda and noted that the applicant was called for personal hearing to explain the case. However, nobody was attended personal hearing on behalf of the applicant. Therefore, the Committee decided to give last opportunities to the applicant for personal hearing in the forthcoming NC meeting. The case stands deferred.

4 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:86/2/81-	Party Name: SATURN	Meet No/Date:6/81-	Status:
ALC2/2019	INDUSTRIES	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0710114695
:01/81/050/01172/AM19/	:07/24/040/00288/AM19/	22.03.2019
HQ E-office Computer No.:
23302

11 Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per comments Consultant (TEC-3) considering reply dated 27.01.2020 as under:

Sl. No.	ITCHS Code	Import Item	RecommendedQuantity
1	74091900	Copper Sheet 2.5 MM	2120 Kgs
2	74091900	CopperSheet3.0MM	853Kgs
3	74091900	Copper Sheet 2.0 MM	20535 Kgs

Case No.:22/18/81-	Party Name: HIND ALUMINIUM	Meet No/Date:6/81-	Status:
ALC2/2019	INDUSTRIES LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310828114	Action By:
:01/81/050/00316/AM20/	:03/94/040/01125/AM19/	02.04.2019	Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application 12 has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by a reminder on 13.03.2020. The applicant via email dated 05.06.2020 requested for some more time to submit the requisite information. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:1/3/81-	Party Name: SEIKODENKI	Meet No/Date:6/81-	Status: Deferred
ALC2/2019	INDIA PRIVATE	ALC2/2020
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410165474	Action By:
:01/81/050/00021/AM20/	:04/24/040/00003/AM20/	15.04.2019	Applicant/MeitY

13 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MeitY was sent to the applicant on 25.09.2019 followed by a reminder on 14.01.2020 & 17.05.2020. It was further noted that MeitY also reminded to the applicant on 24.07.2020 for submitting the requisite information. However, no reply has been received yet. Hence, the Committee decided to wait for the reply/comments.

5 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:6/3/81-ALC2/2019	Party Name: C.	Meet No/Date:6/81-	Status:
	L.GUPTA EXPORTS	ALC2/2020	Approved
	LTD.	11.08.2020
HQ	RLA File	Lic.No/Date:2910025392
File/:01/81/050/00026/AM20	:29/24/040/00001/AM20	16.04.2019
HQ E-office Computer No.:	/
23092

	Case No.:6/3/81-ALC2/2019	Case No.:6/3/81-ALC2/2019	Party Name: C.<br>L.GUPTA EXPORTS<br>LTD.	Party Name: C.<br>L.GUPTA EXPORTS<br>LTD.	Party Name: C.<br>L.GUPTA EXPORTS<br>LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ<br>File/:01/81/050/00026/AM20<br>HQ E-office Computer No.:<br>23092		RLA File<br>:29/24/040/00001/AM20<br>/			Lic.No/Date:2910025392<br>16.04.2019
1<br>4	Decision:The Committee considered the case as per the<br>as per written comments given by MSME via email dated					agenda and decided to fix the ad-hoc norms<br>17.08.2020 as under:
	ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	73269099	Handicraft Artware of<br>S.S. Steel<br>(1 Pcs=1.15 Kg)		33224<br>Number	72199090		Cold Rolled<br>Stainless<br>Steel Coil<br>0.70 Mm<br>430 Grade<br>(Megnatic)	101.32 MT<br>inclusive of 18%<br>(@15% for item<br>No. 1 + @20.5%<br>for item No. 2)<br>wastage after<br>1/3rdrecovery
	73269099	Handicraft Artware of<br>S.S. Steel<br>(1 Pcs= 0.600 Kg )		79278<br>Number

	RA concerned maytake suitable consequential action accordingly.

Case No.:7/3/81-	Party Name: C. L. GUPTA	Meet No/Date:6/81-	Status:
ALC2/2019	EXPORTS LTD.	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:2910025393
:01/81/050/00027/AM20/	:29/24/040/00002/AM20/	16.04.2019
HQ E-office Computer
No.: 23091

	Case No.:7/3/81-<br>ALC2/2019	Case No.:7/3/81-<br>ALC2/2019	Party Name: C. L. GUPTA<br>EXPORTS LTD.	Party Name: C. L. GUPTA<br>EXPORTS LTD.	Party Name: C. L. GUPTA<br>EXPORTS LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00027/AM20/<br>HQ E-office Computer<br>No.: 23091		RLA File<br>:29/24/040/00002/AM20/			Lic.No/Date:2910025393<br>16.04.2019
15	Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments given by MSME via email dated 17.08.2020 as under:
	<br>ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	73269099	Handicraft Artware<br>of S. S. Steel<br>(1pcs = 2.800 Kg)		14532<br>Number	72199090	Cold Rolled<br>Stainless Steel<br>Coil 0.90 mm<br>430 Grade<br>(Magnetic)	108.36 MT inclusive<br>of 15.5%(@ 18.3%<br>for item at Sl. No. 1<br>and @ 13.38% for<br>item No. 2)wastage<br>after 1/3rdrecovery
	73269099	Handicraft Artware<br>of S.S. Steel<br>(1 Pcs = 1.720Kg)		30876<br>Number
	RA concerned maytake suitable consequential action accordingly.

6 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:17/3/81-ALC2/2019	Party Name: TBEA ENERGY	Meet No/Date:6/81-	Status:
	(INDIA) PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:3410045082	Action By:
:01/81/050/00037/AM20/	:34/24/040/00034/AM20/	26.04.2019	Applicant

16 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the applicant on 18.11.2019 followed by reminders on 14.01.2020, 20.05.2020 & 07.08.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the applicant‟s reply.

17	Case No.:28/5/81-<br>ALC2/2019	Party Name: DISHA<br>AUTO COMPONENTS<br>PVT. LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00077/AM20/<br>HQ E-office Computer<br>No.: 23090	RLA File<br>:03/94/040/00121/AM20/	Lic.No/Date:0310829099<br>17.05.2019	Action By:<br>MSME
	Decision:The Committee considered the case as per the agenda and noted that MSME vide email<br>dated 17.08.2020 has recommended the wastages on length bases. Consultant (TEC-3) informed that<br>major process loss comes on thickness of pipe. Hence, the Committee decided to refer the case back<br>to MSME to recommend the wastages on weight basis also.<br>The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that MSME vide email dated 17.08.2020 has recommended the wastages on length bases. Consultant (TEC-3) informed that major process loss comes on thickness of pipe. Hence, the Committee decided to refer the case back to MSME to recommend the wastages on weight basis also.

Case No.:25/5/81-ALC2/2019	Party Name: SEIKODENKI	Meet No/Date:6/81-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Rejected
		11.08.2020
HQ File	RLA File	Lic.No/Date:0410165608
:01/81/050/00074/AM20/	:04/24/040/00027/AM20/	17.05.2019

18 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 18.11.2019 followed by reminders on 14.01.2020 & 20.05.2020. However, no reply has been received yet. Therefore, the Committee decided to reject the case under intimation to RA, Chennai.

7 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:144/14/81-	Party Name: NU-CORK	Meet No/Date:6/81-	Status:
ALC2/2019	PRODUCTS(P) LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510411850	Action By:
:01/81/050/00242/AM20/	:05/24/040/00339/AM20/	16.09.2019	Applicant

19 Decision: The Committee considered the case as per agenda and noted that a letter was sent to the applicant on 07.08.2020 for submitting a legible copy of application along with all the relevant documents. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting a legible copy of application for examination of the case.

Case No.:148/14/81-	Party Name: SCHNEIDER	Meet No/Date:6/81-	Status:
ALC2/2019	ELECTRIC INDIA PVT	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0710115451	Action By:
:01/81/050/00246/AM20/	:07/24/040/00137/AM20/	19.09.2019	Applicant

20 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 04.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:149/14/81-	Party Name: LEITWIND	Meet No/Date:6/81-	Status:
ALC2/2019	SHRIRAM	ALC2/2020	Deferred
	MANUFACTURING	11.08.2020
	PRIVATE LIMITED
HQ File	RLA File	Lic.No/Date:0410166096	Action By:
:01/81/050/00247/AM20/	:04/24/040/00078/AM20/	20.09.2019	Applicant

21 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by a reminder on 13.03.2020 & 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

8 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:151/14/81-	Party Name: LM WIND	Meet No/Date:6/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD	11.08.2020
HQ File	RLA File	Lic.No/Date:3410045466	Action By:
:01/81/050/00249/AM20/	:34/24/040/00191/AM20/	20.09.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-1):

22 1. Net content of FRP in Export Product.
1. Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
2. Net weight of Pultrusions, plate and metal parts.
3. Net weight of Export Product.
4. Value of consumables.
5. SI. No.5 and 11 of the Standard Deficiency Format.

Case No.:152/14/81-	Party Name: LM WIND	Meet No/Date:6/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:3410045467	Action By:
:01/81/050/00250/AM20/	:34/24/040/00190/AM20/	20.09.2019	Applicant

The Committee considered the case as per agenda and decided to seek from the applicant to furnish 23 following information as per advice of Consultant (TEC-1) dated 11.08.2020

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
SI. No.5 and 11 of the Standard Deficiency Format.

9 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:153/14/81-ALC2/2019	Party Name: R R	Meet No/Date:6/81-	Status:
	KABEL LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File :01/81/050/00251/AM20/	RLA File	Lic.No/Date:0310831699
HQ E-office Computer No.:	:03/95/040/00607/A	23.09.2019
23304	M20/

	Case No.:153/14/81-ALC2/2019	Case No.:153/14/81-ALC2/2019	Case No.:153/14/81-ALC2/2019	Party Name: R R<br>KABEL LIMITED	Party Name: R R<br>KABEL LIMITED	Party Name: R R<br>KABEL LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File :01/81/050/00251/AM20/<br>HQ E-office Computer No.:<br>23304			RLA File<br>:03/95/040/00607/A<br>M20/			Lic.No/Date:0310831699<br>23.09.2019
2<br>4	Decision:The Committee considered the case as per the agenda and decided tofixthe ad-hoc norms<br>as per comments Consultant (TEC-3) considering reply dated 07.08.2020 as under:
	ITCHS<br>Code	Export Item	Quantity		Sl.<br>No.	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	85444999	Solar cable - Low<br>Smoke Zero<br>Halogen insulated<br>electric conductors<br>not exceeding 1000<br>volts Net Content:<br>Copper -90154.74<br>Kg,Tin ANODE-<br>2788.29 Kg,<br>Polymers Of<br>Ethylene- 65570.10<br>Kg, Catalyst<br>Masterbatch-<br>3451.06 Kg.	2000<br>Kilomet<br>er		1	74081190		Copper Wire<br>Rod	1.01Kgs/Kg<br>content in the<br>exportproduct
					2	80030020		Tin Anode	1.01Kgs/Kg<br>content in the<br>exportproduct
					3	39019090		Polyethylene	1.05Kgs/Kg<br>content in the<br>exportproduct
					4	38159090		Catalyst<br>Masterbatch<br>(silane<br>crosslinkable<br>polyethylene<br>copolymer)	1.05Kgs/Kg<br>content in the<br>export product
	Note:<br>1. Size & weight of export product as given in reply dated 07.08.2020 may be added in the<br>description of export product.<br>2. The description of import item at Sl. No. 3 may be amended as “Polyethylene”.<br>3. The words “silane crosslinkable polyethylene copolymer” may be added in the<br>description of import item at Sl. No. 4.<br>4. Type of polyethylene to be imported should be same as used in export item.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:160/14/81-	Party Name: KRYFS POWER	Meet No/Date:6/81-	Status:
ALC2/2019	COMPONENTS LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310831798	Action By:
:01/81/050/00258/AM20/	:03/94/040/00475/AM20/	25.09.2019	Applicant

25 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by reminders on 13.03.2020 & 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

10 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:159/14/81-	Party Name: LEITWIND	Meet No/Date:6/81-	Status:
ALC2/2019	SHRIRAM MANUFACTURING	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166105	Action By:
:01/81/050/00257/AM20/	:04/24/040/00102/AM20/	25.09.2019	Applicant

26 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by reminders on 13.03.2020 & 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:163/14/81-	Party Name: P.M. ELECTRO	Meet No/Date:6/81-	Status:
ALC2/2019	AUTO PVT. LTD.	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310831874
:01/81/050/00261/AM20	:03/95/040/00624/AM20/	27.09.2019
HQ E-office Computer
No.: 23762

	Case No.:163/14/81-<br>ALC2/2019	Case No.:163/14/81-<br>ALC2/2019	Case No.:163/14/81-<br>ALC2/2019	Party Name: P.M. ELECTRO<br>AUTO PVT. LTD.	Party Name: P.M. ELECTRO<br>AUTO PVT. LTD.	Party Name: P.M. ELECTRO<br>AUTO PVT. LTD.	Party Name: P.M. ELECTRO<br>AUTO PVT. LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00261/AM20<br>HQ E-office Computer<br>No.: 23762			RLA File<br>:03/95/040/00624/AM20/				Lic.No/Date:0310831874<br>27.09.2019
2<br>7	Decision:The Committee considered the case as per the<br>as per written comments given by MSME via email dated							agenda and decided to fix the ad-hoc norms<br>17.08.2020 as under:
	Sl.<br>No.	ITCHS<br>Code	Export<br>Item		Quantity	Sl.<br>No.	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	1	73082900	Module<br>Mounting<br>Rail<br>Assembly -<br>1.8mm		272250<br>Kgs	1	72104900		Hot Dipped<br>Galvanised<br>Steel Coils -<br>1.95 Mm	334867 Kgs<br>inclusive of 23%<br>wastage after<br>1/3rdrecovery<br>from scrap
	2	73082900	Module<br>Mounting<br>Rail<br>Assembly -<br>1.95mm		56000<br>Kgs	2	72104900		Hot Dipped<br>Galvanised<br>Steel Coils -<br>1.8 Mm	67760 Kgs<br>inclusive of 21%<br>wastage after<br>1/3rdrecovery<br>from scrap.
	Note:<br>1. Per unit weight of item of export at Sl. No. 1 is 0.99 Kg (gross weight of assembly 1.12 kg).<br>2. Per unit weight of item of export at Sl. No. 2 is 1.12 Kg (gross weight of assembly 1.25 kg).<br>RA concerned maytake suitable consequential action accordingly.

11 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:164/14/81-	Party Name: TPM DEPOT	Meet No/Date:6/81-	Status:
ALC2/2019		ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:3110067545	Action By:
:01/81/050/00262/AM20/	:31/83/040/00091/AM20/	27.09.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 28 furnish following information as per comments of DHI:

Catalogue/ Write-up of export item with specific application.
Sl. No. 4, 5 & 11 of the Standard Deficiency Format.
Calculation should be supported by Dimensional Engineering Drawing with relevant dimensions highlighted.
Detail catalogue/write-up and use of import item at Sl. No. 10, 53, 57 to 60 & 141 with their placement in export product.

Case No.:165/14/81-ALC2/2019	Party Name: AUSA	Meet No/Date:6/81-	Status:
	MEDICAL DEVICES	ALC2/2020	Approved
	PRIVATE LIMITED	11.08.2020
HQ File :01/81/050/00263/AM20/	RLA File	Lic.No/Date:0710115498
HQ E-office Computer No.:	:07/24/040/00142/AM20/	30.09.2019
23306

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms 2 on the recommendation of Consultant (SKB) as under:

	ITCHS	Export Item	Quantity	ITCHS	Import Item	Recommended
	Code			Code		Quantity
	73042200	Articles Made Of<br>Stainless Steel Tubes<br>(Net Content of<br>Import item in Export<br>Product 318.63 Kgs)	318.630<br>Kgs	73069090	17-7PH<br>Stainless Steel<br>Tubing<br>Material	1.015 Kgs/Kg<br>content in the<br>export product

Case No.:167/14/81-ALC2/2019	Party Name: AXORA	Meet No/Date:6/81-	Status:
	RESOURCES	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File :01/81/050/00265/AM20/	RLA File	Lic.No/Date:0210209466
HQ E-office Computer No.: 23086	:02/24/040/00098/AM20	30.09.2019

	Case No.:167/14/81-ALC2/2019	Case No.:167/14/81-ALC2/2019	Case No.:167/14/81-ALC2/2019	Party Name: AXORA<br>RESOURCES<br>LIMITED	Party Name: AXORA<br>RESOURCES<br>LIMITED	Party Name: AXORA<br>RESOURCES<br>LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File :01/81/050/00265/AM20/<br>HQ E-office Computer No.: 23086			RLA File<br>:02/24/040/00098/AM20			<br>Lic.No/Date:0210209466<br>30.09.2019
3<br>0	Decision:The Committee considered the case as per the agenda and decided tofixthe ad-hoc norms<br>asper written commentsgiven byMSME via email dated 17.08.2020 as under:<br>ITCHS<br>Code<br>Export Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>78011000<br>Lead Ingot Purity<br>99.97% & Above<br>500 MT<br>78019920 Remelted Lead<br>Ingot<br>517.60 MT inclusive<br>of 2% wastage<br>Note: a. Maximum lead content in import is 98.5%.<br>b. The applicant should import relevant item only.<br>RA concerned maytake suitable consequential action accordingly.
	ITCHS<br>Code	Export Item	Quantity		ITCHS<br>Code	Import Item
	78011000	Lead Ingot Purity<br>99.97% & Above	500 MT		78019920	Remelted Lead<br>Ingot
	Note: a. Maximum lead content in import is 98.5%.<br>b. The applicant should import relevant item only.<br>RA concerned maytake suitable consequential action accordingly.

12 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:166/14/81-	Party Name: VEER-O-METALS	Meet No/Date:6/81-	Status:
ALC2/2019	PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0710115502	Action By:
:01/81/050/00264/AM20/	:07/24/040/00147/AM20/	01.10.2019	Applicant

31 Decision: The Committee considered the case as per agenda and heard the representatives of the applicant during personal hearing held through video conferencing. The representatives explained the case in details and the Committee directed the representatives to submit the reply of deficiencies as raised by Consultant (SKB) in Meeting No. 03/81 dated 27.05.2020.

Case No.:4/15/81-ALC2/2019	Party Name: PARAM	Meet No/Date:6/81-	Status:
	INDUSTRIES	ALC2/2020	Rejected
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310832139
:01/81/050/00273/AM20/	:03/95/040/00694/AM20/	10.10.2019

32 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.10.2019 followed by reminders on 05.12.2019, 13.03.2020 & 05.08.2020. However, no information has been received yet. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

Case No.:5/15/81-ALC2/2019	Party Name: PARAM	Meet No/Date:6/81-	Status:
	INDUSTRIES	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310832140	Action By:
:01/81/050/00274/AM20/	:03/95/040/00693/AM20/	10.10.2019	Applicant

33 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of MSME:

Sl. No. 3, 4, 5 and 11 of the Standard Deficiency Format.

13 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

34	Case No.:<br>6/15/81-ALC2/2019	Party Name: PARAM<br>INDUSTRIES	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00275/AM20/	RLA File<br>:03/95/040/00691/AM20/	Lic.No/Date:0310832141<br>10.10.2019	<br>Action By:<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments of MSME:<br>1. Sl. No. 3, 4, 5 and 11 of the Standard Deficiency Format.<br>The case stands deferred.

Case No.:3/15/81-ALC2/2019	Party Name: STERLITE	Meet No/Date:6/81-	Status:
	POWER TRANSMISSION	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0310832137	Action By:
:01/81/050/00272/AM20/	:03/95/040/00618/AM20/	10.10.2019	Applicant

35 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 20.05.2020 followed by reminder on 05.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

Case No.:1/15/81-ALC2/2019	Party Name: YASH METAL	Meet No/Date:6/81-	Status:
	IMPEX PVT. LTD.	ALC2/2020	Rejected
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310832122
:01/81/050/00270/AM20/	:03/95/040/00669/AM20/	10.10.2019
HQ E-office Computer No.:
23768

36 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.10.2019 followed by reminders on 05.12.2019, 13.03.2020 & 23.05.2020. The applicant vide email dated 26.05.2020 requested for more time to furnish the requisite information. However, no information has been received yet. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

14 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:	Party Name:	Meet No/Date:6/81-	Status:
8/15/81-ALC2/2019	MAHARASHTRA	ALC2/2020	Approved
	SEAMLESS LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0510412078
:01/81/050/00277/AM20/	:05/24/040/00346/AM20/	11.10.2019
HQ E-office Computer No.:
23308

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) on the basis of study group report and the applicant‟s reply dated 05.08.2020 as under:

Export Items:

The following words may be added in the description of export item at Sl. No. 1 & 2 “Coating thickness (i) Epoxy Power-150micron (ii) Adhesive - 200 micron (iii) Polyethylene-1.45 mm and total surface area to be coated-58789 Sq. Mtr.”
The following words may be added in the description of export item at Sl. No. 3 “Coating

37 thickness (i) Epoxy Power-150micron (ii) Adhesive - 200 micron (iii) Polyethylene-1.65 mm and total surface area to be coated-21327 Sq. Mtr.”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as 1.20 MT/MT content in the export product at Sl. No. 1 to 3 as per SION C-797.
Quantity of import item at Sl. No. 2 (Relevant Epoxy Powder) may be allowed as applied. 3. Quantity of import item at Sl. No. 3 (Relevant Adhesive) may be allowed as 18187 Kgs.
Quantity of import item at Sl. No. 4 may be allowed as 132151 Kgs.
Quantity of import item at Sl. No. 5 may be allowed as applied with value restricted upto 0.75% of FoB value of export product of export items at Sl. No. 1 to 3.
Quantity of import item at Sl. No. 6 may be allowed as 1.20 MT/MT content in the export product at Sl. NO. 4 & 5 as per SION C-797.

Note: Grade & thickness of steel to match in import & export

38	Case No.:11/15/81-<br>ALC2/2019	Party Name: SHIVAM<br>IRON AND STEEL<br>COMPANY LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00280/AM20/<br>HQ E-office Computer No.:<br>23309	<br>RLA File<br>:02/24/040/00099/AM20/	Lic.No/Date:0210209475<br>14.10.2019	Action by :<br>Section
	Decision:The Committee considered the case as per agenda and decided to refer<br>Consultant (SKB) for examination and comments.<br>The case stands deferred.			the case to

15 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:15/15/81-	Party Name: METALIC	Meet No/Date:6/81-	Status:
ALC2/2019	IMPRESSIONS (INDIA)	ALC2/2020	Approved
	PVT LTD	11.08.2020
HQ File	RLA File	Lic.No/Date:0510412116
:01/81/050/00284/AM20/	:05/24/040/00386/AM20/	15.10.2019
HQ E-office Computer No.:
23310

	Case No.:15/15/81-<br>ALC2/2019	Case No.:15/15/81-<br>ALC2/2019	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT LTD	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT LTD	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT LTD	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00284/AM20/<br>HQ E-office Computer No.:<br>23310		<br>RLA File<br>:05/24/040/00386/AM20/			Lic.No/Date:0510412116<br>15.10.2019
39	<br>Decision:The Committee considered the case as per<br>per comments given by Consultant (TEC-1) as under:				agenda and		decided to fix the ad-hoc norms as
	<br>ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import<br>Item	Recommended<br>Quantity
	85177090	Mobile Window (3636600<br>Pcs) Made Out Of Hard<br>Coated Acrylic Sheet Duly<br>Printed & Laminated (0.70<br>To 1.50Mm)		15000<br>Kgs	39162019		Acrylic<br>Sheet<br>(1200 mm<br>by 1650<br>mm)	1.05 Kgs/Kg<br>content in the<br>export product
	Note: Size of import item should be 1200 mm by 1650 mm.<br>RA concerned maytake suitable consequential action accordingly.

40	Case No.:16/15/81-<br>ALC2/2019	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00285/AM20/<br>HQ E-office Computer No.:<br>23311	RLA File<br>:03/94/040/00555/AM20/	Lic.No/Date:0310832264<br>16.10.2019
	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 24.08.2020 given by Consultant (SKB). (Copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

16 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:1/18/81-ALC2/2019	Party Name: MODISON	Meet No/Date:6/81-	Status:
	METALS LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310832497	Action By:
:01/81/050/00295/AM20/	:03/95/040/00712/AM20/	30.10.2019	Applicant

Decision: The Committee considered the case as per agenda and DHI informed that the applicant‟s reply is incomplete as the applicant again sent the same reply dated 12.03.2020 via email dated 41 07.08.2020. Therefore, the Committee decided to give last opportunity to the applicant to furnish the following information point-wise as per comments of DHI:

To provide export quantity in number in addition to quantity in weight.
Sl. No. 5 & 11 of the Standard Deficiency Format.
The calculation of the export product should be supported by the dimensional drawing. The case stands deferred.

Case No.:2/18/81-ALC2/2019	Party Name: LM WIND	Meet No/Date:6/81-	Status:
	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD	11.08.2020
HQ File	RLA File	Lic.No/Date:3410045571	Action By:
:01/81/050/00296/AM20/	:34/24/040/00224/AM20/	31.10.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per Comments of Consultant (TEC-1):

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
SI. No. 5 and 11 of the Standard Deficiency Format.

Case No.:5/18/81-ALC2/2019	Party Name: STERLITE	Meet No/Date:6/81-	Status:
	POWER TRANSMISSION	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0310832533	Action By:
:01/81/050/00299/AM20/	:03/95/040/00741/AM20/	31.10.2019	Applicant

43 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 20.05.2020 followed by a reminder on 05.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

17 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:3/18/81-	Party Name:	Meet No/Date:6/81-	Status:
ALC2/2019	JAYACHANDRAN ALLOYS	ALC2/2020	Approved
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:3210079201
:01/81/050/00297/AM20/	:32/24/040/00069/AM20/	01.11.2019
HQ E-office Computer
No.:23084

	Case No.:3/18/81-<br>ALC2/2019	Case No.:3/18/81-<br>ALC2/2019	Case No.:3/18/81-<br>ALC2/2019	Party Name:<br>JAYACHANDRAN ALLOYS<br>PRIVATE LIMITED<br>RLA File<br>:32/24/040/00069/AM20/	Party Name:<br>JAYACHANDRAN ALLOYS<br>PRIVATE LIMITED<br>RLA File<br>:32/24/040/00069/AM20/	Party Name:<br>JAYACHANDRAN ALLOYS<br>PRIVATE LIMITED<br>RLA File<br>:32/24/040/00069/AM20/	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00297/AM20/<br>HQ E-office Computer<br>No.:23084						Lic.No/Date:3210079201<br>01.11.2019
4<br>4	Decision:The Committee considered the case as per the agenda and decided tofixthe<br>as per written comments given by MSME via email dated 11.08.2020 as under:								ad-hoc norms
	Sl.<br>No.	ITCHS<br>Code	Export Item	Quantity	Sl.<br>No.	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	1	78011000	Lead Ingots<br>99.97% Purity Min	283 MT	1	78020010		Lead Scrap<br>namely ISRI<br>Radio,<br>Racks, Relay,<br>Ropes &<br>Roses	299.98 MT<br>inclusive of<br>6% wastage<br>(Taking cue<br>from SION<br>C-1195)
	2	78011000	Lead Ingots<br>99.97%PurityMin	1125<br>MT	2	85481020		Lead Scrap<br>as per ISRI<br>code Rains	3734 MT<br>inclusive of<br>7%<br>wastage
	3	78019990	"Lead Alloy in the<br>form of Ingots<br>(Lead Calcium<br>Alloy)"	500 MT
	4	78019100	"Lead Alloy in the<br>form of Ingots<br>(Lead Antimony<br>Alloy)"	250 MT
	Note:<br>1. Lead content in lead alloy is 99%.<br>2. Average lead content in RAINS is 53.50%.<br>3. The applicant should import relevant items only.<br>RA concerned maytake suitable consequential action accordingly.

45	<br>Case No.:<br>9/18/81-ALC2/2019<br>HQ File<br>:01/81/050/00303/AM20/	Party Name: NUCON AMETRA<br>ELECTRONICS SYSTEMS<br>PRIVATE LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
		RLA File :09/24/040/00389/AM20/	Lic.No/Date:0910068160<br>05.11.2019	<br>Action By:<br>Section
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MeitY on 20.08.2020 for examination of the case. However, MeitY vide email dated<br>25.08.2020 informed that the copy of application was not received by MeitY. Therefore, the<br>Committee decided to send again a copy of application to MeitY for examination of the case.<br>The case stands deferred.

18 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

46	Case No.:12/18/81-ALC2/2019	Party Name:<br>UNIVERSAL CABLES<br>LTD	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved<br>
	<br>HQ File :01/81/050/00306/AM20/<br>HQ E-office Computer No.:<br>23085	RLA File<br>:11/24/040/00003/AM20/	<br>Lic.No/Date:1110028635<br>07.11.2019
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/352/2019-TSW dated 24.07.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/352/2019-TSW dated 24.07.2020. (copy enclosed)

Case No.:13/18/81-	Party Name: JINDAL	Meet No/Date:6/81-ALC2/2020	Status:
ALC2/2019	SAW LIMITED	11.08.2020	Approved
HQ File	RLA File	Lic.No/Date:0510412430
:01/81/050/00307/AM20/	:05/23/040/00307/AM20/	08.11.2019
HQ E-office Computer
No.:23083

Export Items:

The following words may be added in the description of export item added "( a) Adhesive coating thickness on all pipes 270 micron (b) Polyethylene coating thickness & corresponding surface area to be coated (i) 6989.983 sq. mtr. for 2080 micron (ii) 96946.310 sq. mtr. for 2580 micron & 47 (iii) 9410.897 sq.mtr. for 3080 micron”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as applied with value restricted upto 0.5% of FOB value.
Quantity of import item at Sl. No. 2 ( Relevant adhesive ) may be allowed as 34.664 MT. 3. Quantity of import item at Sl. No. 3 ( Relevant Polyethylene ) may be allowed as 320.645 MT. 4. Quantity of import item at Sl. No. 4 ( Relevant Sintered powder ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 5 ( Relevant wiremesh ) may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 6 ( OPC Cement ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 7 may be allowed as per GN-4 .

19 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:14/18/81-	Party Name: JINDAL	Meet No/Date:6/81-ALC2/2020	Status:
ALC2/2019	SAW LIMITED	11.08.2020	Approved
HQ File	RLA File	Lic.No/Date:0510412438
:01/81/050/00308/AM20/	:05/23/040/00303/AM20/	08.11.2019
HQ E-office Computer
No.:23082

Export Items:

The following words may be added in the description of export item “ Coating thickness (a) Epoxy 150 micron (b) Adhesive 300 micron (b) Polyethylene & corresponding surface area to be coated (i) 8476.629 sq. mtr. for 2050 micron (ii) 14212.759 sq. mtr. for 2550 micron & (iii) 7214.350 sq.mtr. for 3050 micron ”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as applied with value restricted upto 0.5% of FOB value.
Quantity of import item at Sl. No. 2 ( Relevant Epoxy Powder ) may be allowed as 7.67MT.
Quantity of import item at Sl. No. 3 ( Relevant adhesive ) may be allowed as 9.10MT.
Quantity of import item at Sl. No. 4 ( Relevant Polyethylene ) may be allowed as 81.32MT.
Quantity of import item at Sl. No. 5 ( Relevant Sintered powder ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 6 ( Relevant wiremesh ) may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 7 ( OPC Cement ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 8 may be allowed as per GN-4 .

Case No.:19/18/81-<br>ALC2/2019	Case No.:19/18/81-<br>ALC2/2019	Party Name: DIACH<br>CHEMICALS & PIGMENTS<br>PRIVATE LIMITED	Party Name: DIACH<br>CHEMICALS & PIGMENTS<br>PRIVATE LIMITED	Party Name: DIACH<br>CHEMICALS & PIGMENTS<br>PRIVATE LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
HQ File<br>:01/81/050/00313/AM20/<br>HQ E-office Computer<br>No.: 23081		<br>RLA File<br>:02/24/040/00117/AM20/			Lic.No/Date:0210209544<br>13.11.2019
<br>Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>asperwritten commentsgiven byMSMEvia email dated 25.08.2020as under:
<br>ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
78019100	Antimonial Lead<br>Ingot 2.75% (Lead<br>Antimonial Alloy)		200 MT	78019920	Remelted Lead Block<br>/ Ingot	202.44 MT<br>inclusive of 2%<br>wastage
Note:<br>1. Maximum percentage of lead in import item is 98%.<br>2. The applicant should import relevant items only.<br>RA concerned maytake suitable consequential action accordingly

20 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:16/18/81-	Party Name: LM WIND	Meet No/Date:6/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:3410045603	Action By:
:01/81/050/00310/AM20/	:34/24/040/00232/AM20/	13.11.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (TEC-1):

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
SI. No. 5 and 11 of the Standard Deficiency Format.

Case No.:20/18/81-	Party Name: LM WIND	Meet No/Date:6/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD	11.08.2020
HQ File	RLA File	Lic.No/Date:3410045611	Action By:
:01/81/050/00314/AM20/	:34/24/040/00246/AM20/	14.11.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (TEC-1):

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
SI. No. 5 and 11 of the Standard Deficiency Format.

Case No.:17/18/81-	Party Name: PEARL	Meet No/Date:6/81-	Status:
ALC2/2019	INSULATIONS PRIVATE	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0710115682	Action By:
:01/81/050/00311/AM20/	:07/24/040/00177/AM20/	14.11.2019	Applicant

52 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by a reminder on 13.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

21 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:21/18/81-ALC2/2019	Party Name: JAIN FGL	Meet No/Date:6/81-	Status:
	METAL INDUSTRIES	ALC2/2020	Approved
		11.08.2020
HQ File :01/81/050/00315/AM20/	RLA File	Lic.No/Date:04101662
HQ E-office Computer No.: 23372	:04/24/040/00128/AM20/	75
		15.11.2019

	Case No.:21/18/81-ALC2/2019	Case No.:21/18/81-ALC2/2019	Case No.:21/18/81-ALC2/2019	Party Name: JAIN FGL<br>METAL INDUSTRIES	Party Name: JAIN FGL<br>METAL INDUSTRIES	Party Name: JAIN FGL<br>METAL INDUSTRIES	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File :01/81/050/00315/AM20/<br>HQ E-office Computer No.: 23372			RLA File<br>:04/24/040/00128/AM20/			<br>Lic.No/Date:04101662<br>75<br>15.11.2019
5<br>3	Decision:The Committee considered the<br>as per written comments given by MSME
	ITCHS<br>Code	Export Item	Quantity		ITCHS<br>Code	Import Item
	74031300	Refined<br>Copper Billets	2280684<br>Kgs		74040012	Copper Wire Scrap<br>as per ISRI Code<br>Druid
	Note:<br>1. Average Copper content in import item is 40.39%.<br>2. Average copper content in export item is 99.97%.<br>3. The applicant should import relevant items only.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:23/18/81-	Party Name: DEWAN &	Meet No/Date:6/81-	Status:
ALC2/2019	SONS	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510412532	Action By:
:01/81/050/00317/AM20/	:05/23/040/00288/AM20/	18.11.2019	Applicant

54 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019 followed by a reminder on 13.03.2020 & 09.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

The case stands deferred

22 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:	Party Name:	Meet No/Date:6/81-ALC2/2020	Status:
27/18/81-ALC2/2019	LEADSTONE ENERGY	11.08.2020	Approved
	LIMITED
HQ File	RLA File	Lic.No/Date:0210209560
:01/81/050/00321/AM20	:02/24/040/00121/AM20/	21.11.2019
HQ E-office Computer
No.: 23313

	Case No.:<br>27/18/81-ALC2/2019	Case No.:<br>27/18/81-ALC2/2019	Party Name:<br>LEADSTONE ENERGY<br>LIMITED	Party Name:<br>LEADSTONE ENERGY<br>LIMITED	Party Name:<br>LEADSTONE ENERGY<br>LIMITED	Meet No/Date:6/81-ALC2/2020<br>11.08.2020	Meet No/Date:6/81-ALC2/2020<br>11.08.2020	Meet No/Date:6/81-ALC2/2020<br>11.08.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00321/AM20<br>HQ E-office Computer<br>No.: 23313		RLA File<br>:02/24/040/00121/AM20/			Lic.No/Date:0210209560<br>21.11.2019
55	Decision:The Committee considered the case as per the agenda and decided to fix the<br>as per written comments given by MSME dated 24.08.2020:								ad-hoc norms
	<br>ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	78011000	Lead Ingot 99.97%<br>Purity		250 MT	78019920		Remelted Lead<br>Ingot	257.50MT inclusive of<br>1.5% wastage
	78019100	Anitimonial Lead (<br>Lead Antimonial<br>Alloy)		250 MT	78019920		Remelted Lead<br>Ingot	251.12 MT inclusive<br>of 2% wastage
	Note:<br>1. Percentage of lead in export item at Sl. No. 2 is 97%.<br>2. Maximum percentage of lead in import is 98.50%.<br>3. The applicant should import relevant items only.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:31/18/81-	Party Name: RAJHANS	Meet No/Date:6/81-	Status:
ALC2/2019	METALS PVT. LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410042932	Action By:
:01/81/050/00325/AM20/	:24/24/040/00036/AM20/	22.11.2019	Applicant

56 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 05.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

The case stands deferred

23 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:32/18/81-	Party Name: JINDAL SAW	Meet No/Date:6/81-	Status:
ALC2/2019	LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510412635
:01/81/050/00326/AM20/	:05/23/040/00317/AM20/	25.11.2019
HQ E-office Computer No.:
23080

Export items:

The following words may be added in the description of the export item " Coating thickness of Epoxy powder 525 micron for base coat & 115 micron for rough coat & corresponding surface area to 57 be coated 15094.225 Sq. Mtr .”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as applied with value restricted upto 0.2% of Fob value.
Quantity of relevant import item at Sl. No. 2 ( epoxy powder for base coat ) may be allowed as 13.67MT.
Quantity of relevant import item at Sl. No. 3 ( epoxy powder for rough coat ) may be allowed as 3 MT.
Quantity of relevant import item at Sl. No. 4 ( wire mesh ) may be allowed as 1.02 Kgs/Kg content in the export item.
Quantity of import item at Sl. No. 5 ( OPC Cement ) may be allowed as 1.05 Kgs/Kg content in the export item.
Quantity of import item at Sl. No. 6 may be allowed as per GN-4 .

RA concerned may take suitable consequential action accordingly

24 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:36/18/81-	Party Name: AKSHAY	Meet No/Date:6/81-	Status:
ALC2/2019	ALUMINIUM ALLOYS	ALC2/2020	Approved
	(P)LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:0510412654
:01/81/050/00330/AM20/	:05/23/040/00331/AM20/	26.11.2019
HQ E-office Computer No.:
23763

	HQ E-office Computer No.:<br>23763	HQ E-office Computer No.:<br>23763
	Decision:The Committee considered the case as per agenda. The Committee observed that there are
	two norms which appear to be applicable to the present case i.e. at C-3 and at C-1679. However, in
	both the entries, the wastages are different. Therefore, the Committee asked the technical authorities to
	provide more clarity on the serial number to be applicable in the current case. The matter was
	discussed in the meeting and the Committee decided to fix the ad-hoc norms on the recommendation
	of Consultant (TEC-3) as under:
5
8	ITCHS<br>Code<br>Export Item<br>QuantitySl.<br>No.<br>ITCHS<br>Code<br>Import Item	Recommended<br>Quantity
	Aluminium Alloy<br>Ingots Containing Net<br>Aluminium - 445350<br>1<br>76020010Aluminium<br>Scrap	As per SION<br>C-3
	76012010<br>KG. Silicon - 47100<br>KG., Copper - 7550<br>KG (Aluminium -<br>500000<br>Kgs<br>2<br>28046900Silicon<br>Metal	As per SION<br>C-3
	89.07%, Silicon -<br>9.42% and Copper -<br>1.51%)<br>3<br>74040012Copper<br>Scrap	As per SION<br>C-3
	Note: The description of import items is as per SION C-3.
	RA concerned maytake suitable consequential action accordingly.

25 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:37/18/81-	Party Name: NAMO	Meet No/Date:6/81-	Status:
ALC2/2019	ALLOYS PVT. LTD.	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510412655
:01/81/050/00331/AM20/	:05/24/040/00505/AM20/	26.11.2019
HQ E-office Computer No.:
23764

5 9

Decision: The Committee considered the case as per agenda. The Committee observed that there are two norms which appear to be applicable to the present case i.e. at C-3 and at C-1679. However, in both the entries, the wastages are different. Therefore, the Committee asked the technical authorities to provide more clarity on the serial number to be applicable in the current case. The matter was discussed in the meeting and the Committee decided to fix the ad-hoc norms on the recommendation of Consultant (TEC-3) as under:

ITCHS<br>Code	Export Item	Quantity	Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	Aluminium Alloy<br>Ingots Containing Net		1	76020010	Aluminium<br>Scrap	As per SION<br>C-3
76012010	Aluminium - 445350<br>KG, Silicon - 47100<br>KG , Copper - 7550<br>KG (Aluminium-<br>89.07%, Silicon-<br>9.42%, Copper-	500000<br>Kgs	2<br>3	28046900<br>74040012	Silicon<br>Metal<br>Copper<br>Scrap	As per SION<br>C-3 <br>As per SION<br>C-3
	1.51%)

Note: The description of import items is as per SION C-3.

Case No.:33/18/81-<br>ALC2/2019	Party Name:<br>THYSSENKRUPP<br>ELECTRICAL STEEL<br>INDIA PVT. LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020

HQ File<br>:01/81/050/00327/AM20/<br>HQ E-office Computer No.:<br>23314	RLA File<br>:31/83/040/00112/AM20/	Lic.No/Date:3110067607<br>26.11.2019

Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 21.08.2020 given by Consultant (SKB). (Copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

26 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

61	Case No.:34/18/81-<br>ALC2/2019	Party Name: THYSSENKRUPP<br>ELECTRICAL STEEL INDIA<br>PVT. LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00328/AM20/<br>HQ E-office Computer<br>No.:23315	RLA File<br>:31/83/040/00113/AM20/	Lic.No/Date:3110067608<br>26.11.2019
	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 21.08.2020 given by Consultant (SKB). (Copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

62	Case No.:35/18/81-<br>ALC2/2019	Party Name: THYSSENKRUPP<br>ELECTRICAL STEEL INDIA<br>PVT. LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020<br> <br> <br>Lic.No/Date:3110067609<br>26.11.2019	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00329/AM20/<br>HQ E-office Computer<br>No.:23317	RLA File<br>:31/83/040/00111/AM20/
	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 21.08.2020 given by Consultant (SKB). (Copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Case No.:39/18/81-	Party Name: WIELAND	Meet No/Date:6/81-	Status:
ALC2/2019	METALS INDIA PRIVATE	ALC2/2020	Deferred
	LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:0710115756	Action By:
:01/81/050/00333/AM20/	:07/24/040/00199/AM20/	27.11.2019	Applicant

Decision: The Committee considered the case as per the agenda. The Committee noted that the 63 applicant was attended personal hearing in Meeting No. 05/81 held on 28.07.2020 for similar cases. Hence, the Committee decided to seek from the applicant to furnish the following information as per advise of the representative of MSME:

To submit a copy of Shipping Bill.
To submit Material Balancing with details of scrap.

27 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:42/18/81-	Party Name: MAK	Meet No/Date:6/81-	Status:
ALC2/2019	CONTROLS AND	ALC2/2020	Approved
	SYSTEMS PVT. LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:3210079262
:01/81/050/00336/AM20/	:32/21/040/00166/AM20/	29.11.2019
HQ E-office Computer No.:
23318

64 Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by DHI as under:

Quantity of import item at Sl. No. 28 to 37, 59 to 61, 148 &149 may be allowed at 1.01 Meters/Meter in export product.
Quantity of rest of the import item may be allowed under GN-4 with accountability clause.

Case No.:43/18/81-	Party Name: JINDAL SAW	Meet No/Date:6/81-	Status:
ALC2/2019	LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510412749
:01/81/050/00337/AM20/	:05/23/040/00333/AM20/	03.12.2019
HQ E-office Computer No.:
23072

Export Items:

The following words may be added in the description of the export item at Sl. No. 1: “CS LSAW 3 LPE coated pipes & surface area to be coated 14009.098 Sq. Mtr. Coating thickness (i) Epoxy 100 micron (ii) Adhesive 250 micron (iii)Polyethylene 3150 micron

Import Items:

Description & quantity of import items at Sl. No. 1 & 8 may be allowed as per Sl. No.1 of SION C-593.
The quantity of import item at Sl. No. 2 i.e. welding wire may be allowed as 4 Kgs/MT of export item.
Quantity of import item at Sl. No. 3 to 5 may be allowed as applied and value restricted up to 1% of FoB value of export item at Sl. No. 1.
Quantity of import item at Sl. No. 6 i.e. relevant adhesive may be allowed as 3.7 MT.
Quantity of import item at Sl. No. 7 i.e. Polyethylene may be allowed as 53.26 MT.
Quantity of import item at Sl. No. 9 i.e . Welding Wire may be allowed as 4.00 Kgs/MT of export item at Sl. No. 2.
Quantity of import item at SL. No. 10 & 11 may be allowed as applied and value restricted up to 1% of FoB value of export item at Sl. No. 2.

Note: Grade & thickness of steel to match in import & export.

28 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:45/18/81-	Party Name: DISHA AUTO	Meet No/Date:6/81-	Status:
ALC2/2019	COMPONENTS PVT.LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310833218
:01/81/050/00339/AM20/	:03/94/040/00675/AM20/	04.12.2019

Decision: The Committee considered the case as per the agenda and decided to seek from the 66 applicant to furnish the following information as per written comments of Consultant (TEC-3):

Sl. No. 3, 4, 5 & 11 of the Standard Deficiency Format.
Drawing/diagram of blank with dimensions of each export product.
Copy of Advance Authorization.

The case stands deferred

Case No.:2/21/81-ALC2/2019	Party Name: SUKRUT	Meet No/Date:6/81-	Status:
	ELECTRIC COMPANY	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:3110067639	Action By:
:01/81/050/00377/AM20/	:31/83/040/00119/AM20/	30.12.2019	Applicant

Decision: The Committee considered the case as per the agenda and decided to seek from the 67 applicant to furnish the following information as per comments of Consultant (TEC-3):

Specific use of each import item in export product.
To provide clarification for., why items of import are mentioned as parts of transformer while export product is a terminal box.
Sl. No. 8 & 9 of the Standard Deficiency Format.

Case No.:4/21/81-ALC2/2019	Party Name: KUNJ	Meet No/Date:6/81-	Status:
	FORGINGS PVT.LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510413153	Action By:
:01/81/050/00379/AM20/	:05/23/040/00379/AM20/	31.12.2019	Applicant

68 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments of MSME:

To provide per unit weight of export product.
Manufacturing process with material balancing and step-wise wastage

29 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:6/21/81-ALC2/2019	Party Name: NORDEX	Meet No/Date:6/81-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0710115967	Action By:
:01/81/050/00381/AM20/	:07/24/040/00234/AM20/	01.01.2020	Applicant

69 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

The case stands deferred

Case No.:11/21/81-	Party Name: LOTUS	Meet No/Date:6/81-	Status:
ALC2/2019	AVIATION TECHNOLOGY	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0510413205	Action By:
:01/81/050/00386/AM20/	:05/23/040/00391/AM20/	03.01.2020	Applicant

70 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 14.01.2020 followed by reminders 22.05.2020 & 06.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:15/21/81-	Party Name: PARAM	Meet No/Date:6/81-	Status:
ALC2/2019	INDUSTRIES	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310833956	Action By:
:01/81/050/00390/AM20/	:03/95/040/00943/AM20/	07.01.2020	Applicant

71 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments of MSME:

Sl. No. 3, 4, 5 & 11 of the Standard Deficiency Format. The case stands deferred.

Case No.:1/24/81-ALC2/2019	Party Name: RATNAVEER	Meet No/Date:6/81-	Status:
	METALS LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:3410045891	Action By:
:01/81/050/00438/AM20/	:34/24/040/00220/AM20/	19.02.2020	Applicant

72 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 12.03.2020 followed by reminders 24.05.2020 & 06.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

30 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:2/24/81-ALC2/2019	Party Name: GOLD METAL	Meet No/Date:6/81-	Status:
	EXTRUSION	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043023	Action By:
:01/81/050/00439/AM20/	:24/24/040/00056/AM20/	20.02.2020	Applicant

73 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

74	Case No.:3/24/81-ALC2/2019	Party Name: MITTAL<br>APPLIANCES LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00440/AM20/	RLA File<br>:56/24/040/00037/AM20/	Lic.No/Date:5610005825<br>20.02.2020
	<br>Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (SKB) was sent to the applicant on 06.08.2020. However,<br>no reply has been received yet. Therefore, the Committee decided to remind the applicant for<br>furnishing the requisite information.<br>The case stands deferred.

75	Case No.:4/24/81-ALC2/2019	Party Name: TAMRA<br>DHATU UDYOG PRIVATE<br>LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00441/AM20/	RLA File<br>:02/24/040/00189/AM20/	Lic.No/Date:0210209779<br>20.02.2020	<br>Action By:<br>DPIIT
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant‟s reply was<br>forwarded to DPIIT via email dated 18.08.2020 for examination of the case. However, no comments<br>have been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

31 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:8/24/81-	Party Name: AKSHAY	Meet No/Date:6/81-	Status:
ALC2/2019	ALUMINIUM ALLOYS LLP	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510413681
:01/81/050/00445/AM20/	:05/23/040/00448/AM20/	21.02.2020
HQ E-office Computer
No.:23319

7 6

ITCHS<br>Code	Export Item	Quantity	Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	Aluminium Alloy<br>Ingots Containing Net		1	76020010	Aluminium<br>Scrap	As per SION<br>C-3
76012010	Aluminium-178140.00<br>Kg, Silicon-18840.00<br>Kg, Copper- 3020.00	200000<br>Kgs	2	28046900	Silicon<br>Metal	As per SION<br>C-3
	Kg (Aluminium-<br>89.07%, Silicon-9.42%<br>And Copper-1.51%)		3	74040012	Copper<br>Scrap	As per SION<br>C-3

Note: The description of import items is as per SION C-3.

32 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:7/24/81-ALC2/2019	Party Name: KEI	Meet No/Date:6/81-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510413680
:01/81/050/00444/AM20/	:05/23/040/00446/AM20/	21.02.2020
HQ E-office Computer No.:
23069

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) dated 16.08.2020 as under:

77 1. Quantity of import item at Sl. No. 1 & 10 may be allowed as 1.01 Kgs/Kg content in export product.
1. Quantity of import items at Sl. No. 2 to 4, 8 & 9 may be allowed as 1.05 Kgs/Kg content in export product.
2. Quantity of import item at Sl. No. 5 may be allowed as 1.02 Kgs/Kg content in export product.
3. Quantity of import item at Sl. No. 6 may be allowed as 1.01 Kgs/Kg content in the export product. The words " Copper foil " may be deleted from the description of import item.
4. Quantity of import item at Sl. No. 7 may be allowed as 1.02 Sq. Mtr/Sq. Mtr content in the export product.

Case No.:5/24/81-ALC2/2019	Party Name: TOSHIBA	Meet No/Date:6/81-	Status:
	TRANSMISSION &	ALC2/2020	Deferred
	DISTRIBUTION SYSTEMS	11.08.2020
HQ File	RLA File	Lic.No/Date:0910068506	Action By:
:01/81/050/00442/AM20/	:09/24/040/00571/AM20/	21.02.2020	Applicant

78 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments of DHI:
1. Specific use of Aluminum sheets (item no 3) in export product with justification of quantity of import & wastage.

Case No.:6/24/81-ALC2/2019	Party Name: TOSHIBA	Meet No/Date:6/81-	Status:
	TRANSMISSION &	ALC2/2020	Deferred
	DISTRIBUTION SYSTEMS	11.08.2020
HQ File	RLA File	Lic.No/Date:0910068507	Action By:
:01/81/050/00443/AM20/	:09/24/040/00572/AM20/	21.02.2020	Applicant

Decision: The Committee considered the case as per the agenda and decided to seek from the 79 applicant to furnish the following information as per comments of DHI:

Specific use of Aluminum sheets (item no 3) in export product with justification of quantity of import & wastage.
Calculation of painting material for import item at Sl. No. 5 & 6.

33 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:9/24/81-	Party Name: AXORA	Meet No/Date:6/81-	Status:
ALC2/2019	RESOURCES LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0210209788
:01/81/050/00446/AM20/	:02/24/040/00193/AM20/	24.02.2020
HQ E-office Computer
No.: 23323

	Case No.:9/24/81-<br>ALC2/2019	Case No.:9/24/81-<br>ALC2/2019	Party Name: AXORA<br>RESOURCES LIMITED	Party Name: AXORA<br>RESOURCES LIMITED	Party Name: AXORA<br>RESOURCES LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00446/AM20/<br>HQ E-office Computer<br>No.: 23323		<br>RLA File<br>:02/24/040/00193/AM20/			Lic.No/Date:0210209788<br>24.02.2020
8<br>0	Decision:The Committee considered the case as per agenda and decided to fix<br>per written comments given by MSME via email dated 25.08.2020 as under:							the ad-hoc norms as
	ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	78019100	Antimonial Lead Ingot<br>2.5 % / 3.20% / 2.75 %<br>(Lead AntimonyAlloy)		400 MT	78019920		Remelted Lead<br>Block / Ingot	511.46 MT<br>inclusive of 2%<br>wastage
	Note:<br>1. Average lead content in export item (lead alloy) is 97%.<br>2. Maximum lead content in import item is 98.5%.<br>3. The applicant should import relevant item only.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:13/24/81-	Party Name: MITTAL	Meet No/Date:6/81-	Status:
ALC2/2019	APPLIANCES LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:5610005827	Action By:
:01/81/050/00450/AM20/	:56/24/040/00038/AM20/	25.02.2020	Applicant

81 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

34 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:14/24/81-	Party Name: POLYCAB	Meet No/Date:6/81-	Status:
ALC2/2019	INDIA LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310835066
:01/81/050/00451/AM20/	:03/95/040/01118/AM20/	26.02.2020
HQ E-office Computer No.:
23068

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) dated 16.08.2020 as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 3 to 8, 11 to 19, 23 & 24 may be allowed as 1.05 Kgs/Kg

82 content in the export product.

Quantity of import items at Sl. No. 20, 22 & 25 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 9 & 21 may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 10 may be allowed as 4 % of steel to be galvanized.
Quantity of import items at Sl. No. 26 & 27 may be allowed as per packing policy.

Note:

1. Sizes and weight given with application may be incorporated in the description of the export item.

2. Grade of steel to match in import & export

Case No.:11/24/81-	Party Name: SIECHEM	Meet No/Date:6/81-	Status:
ALC2/2019	TECHNOLOGIES	ALC2/2020	Approved
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166565
:01/81/050/00448/AM20/	:04/24/040/00183/AM20/	26.02.2020
HQ E-office Computer
No.: 23066

83 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) dated 16.08.2020 as under:

Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended Quantity
1	74081190	8mmContinousCastCopper Rod	1.01 Kgs/Kgcontent in the exportproduct

35 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:12/24/81-	Party Name: SIECHEM	Meet No/Date:6/81-	Status:
ALC2/2019	TECHNOLOGIES PRIVATE	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166566	Action By:
:01/81/050/00449/AM20/	:04/24/040/00184/AM20/	26.02.2020	Section

Decision: The Committee considered the case as per agenda and noted the comments of Consultant 84 (TEC-3) for import item at Sl. No. 1. For rest of the import items, the Committee decided to seek from the applicant to furnish the following information as per comment of Consultant (TEC-1):

Sl. No. 12 of the Standard Deficiency Format.
Generic name & catalogue of items at Sl. No. 2 to 8.
Justification for import of many types of insulating materials.

Case No.:15/24/81-	Party Name: DIACH	Meet No/Date:6/81-	Status:
ALC2/2019	CHEMICALS & PIGMENTS	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0210209796	Action By:
:01/81/050/00452/AM20/	:02/24/040/00197/AM20/	27.02.2020	Applicant

85 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of MSME:

Percentage of lead in alloy.
Certificate of analysis of import item.

Case No.:18/24/81-	Party Name: KALPATARU	Meet No/Date:6/81-	Status:
ALC2/2019	POWER TRANSMISSION	ALC2/2020	Deferred
	LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:0810147363	Action By:
:01/81/050/00455/AM20/	:08/24/040/00382/AM20/	28.02.2020	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 86 furnish following information as per comments of Consultant (TEC-3):

Sl. No. 5 & 11 of Standard Deficiency Format.
To provide clarification for, why the import item at Sl. No. 3 & 4 are same.
To provide clarification for, total value of inputs (import + indigenous) is much higher than the value of export.

36 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:16/24/81-<br>ALC2/2019	Party Name: WAAREE<br>ENERGIES LTD.	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
<br>HQ File<br>:01/81/050/00453/AM20/	RLA File<br>:52/24/040/00074/AM20/	Lic.No/Date:5210043347<br>28.02.2020	Action By:<br>Applicant
<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to
furnish following information as per comments of Consultant (TEC-3):
1. Calculations of requirement of each raw material with justification.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (TEC-3):

Case No.:17/24/81- Party Name: APAR Meet No/Date:6/81-ALC2/2020 Status: ALC2/2019 INDUSTRIES LIMITED 11.08.2020 Approved HQ File RLA File Lic.No/Date:0310835137 :01/81/050/00454/AM20/ :03/94/040/01002/AM20/ 02.03.2020 HQ E-office Computer No.: 23065

	Case No.:17/24/81-<br>ALC2/2019	Party Name: APAR<br>INDUSTRIES LIMITED	Meet No/Date:6/81-ALC2/2020<br>11.08.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00454/AM20/<br>HQ E-office Computer<br>No.:23065	<br>RLA File<br>:03/94/040/01002/AM20/	Lic.No/Date:0310835137<br>02.03.2020
88	<br>Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments given by Consultant (TEC-3) considering reply dated 14.07.2020 as under:<br>Import Items:<br>Sl.<br>No.<br>ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>1<br>74081190 COPPER WIRE ROD : 8 MM DIA<br>Net + 1% wastage or as applied,<br>whichever is lower<br>2<br>76011010PRIMARY UNALLOYED<br>ALLUMINIUM INGOTS/SOW/T-BARS<br>Net + 1% wastage or as applied,<br>whichever is lower<br>3<br>39011090 XLPE COMPOUND<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>4<br>29173200 Plasticiser (DOP)<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>5<br>39041020 PVC RESIN<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>6<br>40027000 EPDM<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>7<br>38029019 CALCINED CLAY<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>8<br>39013000 EVA CO-POLYMER<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>9<br>28183000 ALUMINIUM HYDROXIDE<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>10<br>39019000 POLYMERS OF ETHYLENE<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>Note:<br>1. Weight of cable may be incorporated in the description of export product as given in the<br>applicant‟s reply letter dated 14.07.2020 (copy enclosed).<br>2. For import item at Sl. No.10, type of polymer to be imported will be same as used in export<br>product.<br>RA concerned maytake suitable consequential action accordingly.

2. For import item at Sl. No.10, type of polymer to be imported will be same as used in export product. RA concerned may take suitable consequential action accordingly.

37 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:21/24/81-	Party Name: RAJHANS	Meet No/Date:6/81-	Status:
ALC2/2019	IMPEX PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043047	Action By:
:01/81/050/00458/AM20/	:24/24/040/00060/AM20/	03.03.2020	Applicant

89 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for submitting the requisite information.

Case No.:2/3/81-ALC2/2020	Party Name: SELP INDIA	Meet No/Date:6/81-	Status:
	PVT. LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310835853	Action By:
:01/81/050/00501/AM21/	:03/95/040/00019/AM21/	25.04.2020	MeitY

90 Decision: The Committee considered the case as per the agenda and noted that the applicant has directly sent the reply of deficiency letter to MeitY on 08.07.2020, 09.07.2020 & 24.07.2020. However, MeitY via email dated 25.08.2020 informed that the case is under examination. Hence, the Committee decided to wait for the comments.

38 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:4/3/81-	Party Name: APAR	Meet No/Date:6/81-	Status:
ALC2/2020	INDUSTRIES LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310835975
:01/81/050/00503/AM21/	:03/94/040/01069/AM20/	26.04.2020
HQ E-office Computer
No.:23064

	Case No.:4/3/81-<br>ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00503/AM21/<br>HQ E-office Computer<br>No.:23064	RLA File<br>:03/94/040/01069/AM20/	Lic.No/Date:0310835975<br>26.04.2020
91	<br>Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments given by Consultant (TEC-3) considering reply dated 08.08.2020 as under:<br>Import Items:<br>Sl.<br>No.<br>ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>1<br>74081190 Copper Wire Rod : 8 Mm Dia<br>Net + 1% wastage or as applied,<br>whichever is lower<br>2<br>76011010Primary Unalloyed Alluminium Ingots/<br>Sow/T-Bars<br>Net + 1% wastage or as applied,<br>whichever is lower<br>3<br>39011090 XLPE Compound<br>Net + 2.5% wastage or as applied,<br>whichever is lower<br>4<br>29173200 Plasticiser(DOP)<br>Net + 2.5% wastage or as applied<br>5<br>39041020PVCResin<br>Net + 2.5% wastage or as applied<br>6<br>39019090 Semi ConductingCompound<br>Net + 2.5% wastage or as applied<br>7<br>39019090Low Smoke Zero Halogen Compound<br>(LSZH)<br>Net + 2.5% wastage or as applied<br>8<br>40027000EPDM<br>Net + 2.5% wastage or as applied<br>9<br>38029019 CalcinedClay<br>Net + 2.5% wastage or as applied<br>10<br>28183000 Aluminium Hydroxide<br>Net + 2.5% wastage or as applied<br>Note: Weight of cable may be incorporated in the description of export product as given in the<br>applicant‟s reply letter dated 08.08.2020 (Copy enclosed).<br>RA concerned maytake suitable consequential action accordingly.

Case No.:3/3/81-ALC2/2020	Party Name: SELP INDIA	Meet No/Date:6/81-	Status:
	PVT. LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310835959	Action By:
:01/81/050/00502/AM21/	:03/95/040/00032/AM21/	26.04.2020	MeitY

92 Decision: The Committee considered the case as per the agenda and noted that the applicant directly has sent reply of deficiency letter to MeitY on 08.07.2020, 09.07.2020 & 24.07.2020. However, MeitY via email dated 25.08.2020 informed that the case is under examination. Hence, the Committee decided to wait for the comments.

39 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:5/3/81-ALC2/2020	Party Name: RAJHANS	Meet No/Date:6/81-	Status:
	IMPEX PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043085	Action By:
:01/81/050/00504/AM21/	:24/24/040/00002/AM21/	28.04.2020	Applicant

93 Decision: The Committee considered the case as per agenda and noted that a deficiency letter along with a request to submit complete set of application as raised by Consultant (SKB) was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for submitting the requisite information.

Case No.:6/3/81-ALC2/2020	Party Name: EFD	Meet No/Date:6/81-	Status:
	INDUCTION PRIVATE	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0710116386
:01/81/050/00505/AM21/	:07/24/040/00021/AM21/	29.04.2020
HQ E-office Computer No.:
23071

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 94 per written comments given by MeitY vide F. No. W-21/32/2020-IPHW-MeitY dated 12.06.2020 as under:

Quantity of import items at Sl. No. 1 & 3 to 7 may be allowed on net to net basis with zero wastage.
Quantity of import items at Sl. No. 2 & 8 to 12 may be allowed on net to net basis with accountability clause on nil wastage .

Case No.:7/3/81-ALC2/2020	Party Name: EFD	Meet No/Date:6/81-	Status:
	INDUCTION PRIVATE	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0710116387
:01/81/050/00506/AM21/	:07/24/040/00022/AM21/	29.04.2020
HQ E-office Computer No.:
23070

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 95 per written comments given by MeitY vide F. No. W-21/33/2020-IPHW-MeitY dated 12.06.2020 as under:

1. Quantity of import items at Sl. No. 1 & 3 to 15 may be allowed on net to net basis with accountability clause.

2. Quantity of import items at Sl. No. 2 & 16 to 27 may be allowed as applied with accountability clause on nil wastage .

40 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:10/3/81-ALC2/2020	Party Name: JAIN FGL	Meet No/Date:6/81-	Status:
	METAL INDUSTRIES	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0410166701	Action By:
:01/81/050/00509/AM21/	:04/24/040/00005/AM21/	29.04.2020	Applicant

96 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for submitting the requisite information.

Case No.:8/3/81-	Party Name: MITTAL COIN	Meet No/Date:6/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:5610005860
:01/81/050/00507/AM21/	:56/24/040/00001/AM21/	29.04.2020
HQ E-office Computer
No.:23059

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per advice/comments given by Consultant (SKB) as under:

	ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	74031300	Refined Copper<br>Billetshaving<br>minimum<br>purity of<br>99.00%	287 MT	74040012	Copper Scrap Druidas<br>per ISRI (Copper<br>content in the range of<br>37 % to 65%)	1.03 Kgs/Kg<br>content in the<br>export product

Note:

1. The export item should have minimum purity of 99.00%. RA concerned may take suitable consequential action accordingly.

Case No.:9/3/81-ALC2/2020	Party Name: EFD	Meet No/Date:6/81-	Status:
	INDUCTION PRIVATE	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0710116398
:01/81/050/00508/AM21/	:07/24/040/00029/AM21/	30.04.2020
HQ E-office Computer No.:
23057

98 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by MeitY vide F. No. W-21/34/2020-IPHW-MeitY dated 12.06.2020 as under:

Quantity of import items at Sl. No. 1 & 3 to 7 may be allowed on net to net basis with accountability clause.
Quantity of import items at Sl. No. 2 & 8 to 14 may be allowed as applied with accountability clause on nil wastage .

41 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:13/3/81-ALC2/2020	Party Name: POLYCAB	Meet No/Date:6/81-	Status:
	INDIA LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310836051
:01/81/050/00512/AM21/	:03/95/040/00046/AM21/	01.05.2020
HQ E-office Computer No.:
23060

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) as under:

99 1. Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
1. Quantity of import items at Sl. No. 3 to 5 & 8 to 18 may be allowed as 1.05 Kgs/Kg content in the export product.
2. Quantity of import item at Sl. No. 6 may be allowed as 1.02 Kgs/Kg content in the export product.
3. Quantity of import item at Sl. No. 7 may be allowed with 4% of steel to be galvanized.
4. Quantity of import items at Sl. No. 19 & 20 may be allowed as per packing policy .

Note: Grade of steel to match in import & export.

Case No.:15/3/81-	Party Name: R T JAIN &	Meet No/Date:6/81-	Status:
ALC2/2020	COMPANY	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310836059	Action By:
:01/81/050/00514/AM21/	:03/95/040/00037/AM21/	01.05.2020	Applicant

100 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 28.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:14/3/81-	Party Name: REEP	Meet No/Date:6/81-	Status:
ALC2/2020	INDUSTRIES PVT. LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0410166711	Action By:
:01/81/050/00513/AM21/	:04/24/040/00008/AM21/	01.05.2020	Applicant

101 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 07.08.2020. However, no reply has been received yet. Hence, the Committee decided to remind the applicant for submitting the requisite information.

42 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

102	Case No.:11/3/81-<br>ALC2/2020	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00510/AM21/<br>HQ E-office Computer No.:<br>23050	RLA File<br>:03/95/040/00906/AM20/	Lic.No/Date:0310836042<br>01.05.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/7/2019-TSW dated 18.08.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Case No.:12/3/81-	Party Name: ZOBELE INDIA	Meet No/Date:6/81-	Status:
ALC2/2020	PVT. LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310836043	Action By:
:01/81/050/00511/AM21/	:03/95/040/01153/AM20/	01.05.2020	Applicant

103 Decision: The Committee considered the case as per the agenda and noted that MeitY has sought certain information from the applicant vide email dated 09.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information as asked by MeitY.

Case No.:18/3/81-	Party Name: APAR	Meet No/Date:6/81-	Status:
ALC2/2020	INDUSTRIES LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310836093	Action By:
:01/81/050/00517/AM21/	:03/94/040/00001/AM21/	04.05.2020	Applicant

104 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (TEC-3):

Sl. No. 12 of the Standard Deficiency Format.
Composition of insulating compound.
Name of specific polymer in item 4. The case stands deferred.

105	Case No.:19/3/81-<br>ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED	<br>Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status: Deferred
	<br>HQ File<br>:01/81/050/00518/AM21/	<br>RLA File<br>:03/94/040/00026/AM21/	<br>Lic.No/Date:0310836094<br>04.05.2020	Action By:<br>Consultant(TEC-3)
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 29.07.2020 for examination of the case. However, the comments are<br>still awaited. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the<br>comments.<br>The case stands deferred.

43 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:16/3/81-	Party Name: TRANSCON	Meet No/Date:6/81-	Status:
ALC2/2020	INDUSTRIES	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0910068722	Action By:
:01/81/050/00515/AM21/	:09/24/040/00040/AM21/	04.05.2020	Applicant

106 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 26.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:20/3/81-	Party Name: GOLD METAL	Meet No/Date:6/81-	Status:
ALC2/2020	EXTRUSION	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043093	Action By:
:01/81/050/00519/AM21/	:24/24/040/00004/AM21/	06.05.2020	Applicant

107 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 07.08.2020. However, no reply has been received yet. Hence, the Committee decided to remind the applicant for submitting the requisite information.

108	Case No.:17/3/81-<br>ALC2/2020	Party Name: JINDAL<br>SAW LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status: Deferred
	<br>HQ File<br>:01/81/050/00516/AM21/	<br>RLA File<br>:05/23/040/00012/AM21/	<br>Lic.No/Date:0510414105<br>06.05.2020	Action By:<br>Consultant(TEC-3)
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 07.08.2020 for examination of the case. However, the comments are<br>still awaited. Hence, the Committee decided to wait for comments.<br>The case stands deferred.

44 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:22/3/81-	Party Name: MS SUPER	Meet No/Date:6/81-	Status:
ALC2/2020	IMPEX	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043095
:01/81/050/00521/AM21	:24/24/040/00003/AM21/	08.05.2020
HQ E-office Computer
No.: 23049

10 9

HQ E-office Computer<br>No.: 23049
Decision:The Committee considered the case as per agenda	and decided to fix		the ad-hoc norms as
per comments given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export Item<br>QuantityITCHS<br>Code		Import Item	Recommended<br>Quantity
74032100<br>Brass Billets<br>500000<br>Kg<br>74040022		Brass Scrap<br>(Honey Grade<br>as per ISRI)	1.06Kgs/Kg<br>content in the<br>exportproduct
Note: (i) The export item i.e. Brass Billets should contain-	Copper 51 -61%, Lead 2 - 3.5%,
Zinc- 33 -35.5%.
(ii) Composition of brass in export and import should conform.
RA concerned maytake suitable consequential action accordingly.

Case No.:21/3/81-	Party Name: SHREE	Meet No/Date:6/81-	Status:
ALC2/2020	BHAVANI EXTRUSION	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:2410043094	Action By:
:01/81/050/00520/AM21/	:24/24/040/00005/AM21/	08.05.2020	Applicant

110 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 07.08.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for submitting the requisite information.

Case No.:24/3/81-	Party Name: LLOYD	Meet No/Date:6/81-	Status:
ALC2/2020	INSULATIONS (INDIA)	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166730	Action By:
:01/81/050/00523/AM21/	:04/24/040/00010/AM21/	11.05.2020	Applicant

111 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 22.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

45 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:23/3/81-	Party Name: RHJ TUBES	Meet No/Date:6/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310836165	Action By:
:01/81/050/00522/AM21/	:03/95/040/00067/AM21/	11.05.2020	Applicant

112 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 25.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:25/3/81-	Party Name:	Meet No/Date:6/81-	Status:
ALC2/2020	WINOMECHANIC	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166746	Action By:
:01/81/050/00524/AM21/	:04/24/040/00006/AM21/	12.05.2020	Applicant

113 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 26.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:26/3/81-	Party Name:	Meet No/Date:6/81-	Status:
ALC2/2020	WINOMECHANIC	ALC2/2020	Deferred
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166751	Action By:
:01/81/050/00525/AM21/	:04/24/040/00017/AM21/	12.05.2020	Applicant

114 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 26.05.2020 followed by a reminder on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

46 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:1/6/81-ALC2/2020	Party Name: KEI	Meet No/Date:6/81-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510414582	Action By:
:01/81/050/00628/AM21/	:05/23/040/00066/AM21/	08.07.2020	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 115 to furnish following information as per written comments of DPIIT vide U. O. No.: P- 47011/95/2019-TSW dated 18.08.2020:

Net weight of each cable.
Material balancing viz net content of each imported and indigenous input for each cable.
Tabular statement giving total requirement of each raw material, export product wise.

116	<br>Case No.:2/6/81-<br>ALC2/2020<br>HQ File<br>:01/81/050/00629/AM21/	Party Name: NAVGRAH<br>FASTNERS PVT. LTD.	<br>Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status: Deferred
		RLA File<br>:52/24/040/00022/AM21/	<br>Lic.No/Date:5210043453<br>08.07.2020	Action By:<br>Consultant(TEC-3)
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 25.08.2020 for examination of the case. However, the comments are<br>still awaited. Hence, the Committee decided to wait for comments.<br>The case stands deferred.

Case No.:5/6/81-	Party Name: CHINA STEEL	Meet No/Date:6/81-	Status:
ALC2/2020	CORPORATION INDIA	ALC2/2020	Approved
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:3410046200
:01/81/050/00632/AM21/	:34/24/040/00083/AM21/	09.07.2020
HQ E-office Computer
No.:23048

	Case No.:5/6/81-<br>ALC2/2020	Case No.:5/6/81-<br>ALC2/2020	Case No.:5/6/81-<br>ALC2/2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00632/AM21/<br>HQ E-office Computer<br>No.:23048			Lic.No/Date:3410046200<br>09.07.2020
117	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>repeat basis as approved for AA No. 3410043636 dated 14.11.2017 in NC-2 M. No. 05/81 dated<br>12.06.2019 on the recommendation of Consultant (SKB) as under:
	<br>Sl.<br>No.	ITCHS<br>Code	Import Item		Recommended<br>Quantity
	1	72251900	Silicon Electrical Steel Of Cold Rolled Full Hard<br>(Unannealed) Wide Coil Grade: 50C800, Width of<br>600mm Or More,Thickness 0.300mm-0.750mm		1.015Kgs/Kg content<br>in the export product
	2	72251900	Silicon Electrical Steel Of Cold Rolled Full Hard<br>(Unannealed) Wide Coil Grade: 50C470,Width of<br>600mmOr More,Thickness0.300mm-0.750mm		1.015Kgs/Kg content<br>in the export product
	3	72251900	Silicon Electrical Steel Of Cold Rolled Full Hard<br>(Unannealed) Wide Coil Grade: 50c600,Width of<br>600mm Or More,Thickness 0.300mm-0.750mm		1.015Kgs/Kg content<br>in the export product
	RA concerned maytake suitable consequential action accordingly.

47 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

118	Case No.:3/6/81-ALC2/2020	Party Name: POLYCAB<br>INDIA LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00630/AM21/<br>HQ E-office Computer No.:<br>23047	RLA File<br>:03/95/040/00221/AM21/	Lic.No/Date:0310837114<br>09.07.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments given byDPIITvide U. O. No.: P-47011/112/2020-TSW dated 17.08.2020<br>(copy enclosed).<br>RA concerned maytake suitable consequential action accordingly.

Case No.:4/6/81-ALC2/2020	Party Name: METAL CARE	Meet No/Date:6/81-	Status:
	ALLOYS PRIVATE	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0310837128	Action By:
:01/81/050/00631/AM21/	:03/95/040/00218/AM21/	10.07.2020	Applicant

119 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:6/6/81-ALC2/2020	Party Name: METALIC	Meet No/Date:6/81-	Status:
	IMPRESSIONS (INDIA)	ALC2/2020	Deferred
	PVT. LTD.	11.08.2020
HQ File	RLA File	Lic.No/Date:0510414604	Action By:
:01/81/050/00633/AM21/	:05/24/040/00169/AM21/	10.07.2020	Applicant

120 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

48 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

121	Case No.:7/6/81-<br>ALC2/2020	Party Name: JAIN<br>RECYCLING<br>PRIVATE LIMITED	Meet No/Date:6/81-ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00634/AM21<br>HQ E-office Computer<br>No.: 23354	<br>RLA File<br>:32/24/040/00022/AM21	<br>Lic.No/Date:3210079597<br>13.07.2020	Action By:<br>Section
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 21.08.2020 for examination of the case. However, the matter was<br>deliberated in the meeting and the Committee decided to refer the case to Consultant(SKB) for<br>examination.<br>The case stands deferred.

Case No.:8/6/81-ALC2/2020	Party Name: PARAM	Meet No/Date:6/81-	Status:
	INDUSTRIES	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310837191	Action By:
:01/81/050/00635/AM21/	:03/95/040/00205/AM21/	14.07.2020	Applicant

122 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:	Party Name: UNIVERSAL	Meet No/Date:6/81-	Status:
9/6/81-ALC2/2020	CABLES LTD.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:1110028725	Action By:
:01/81/050/00636/AM21/	:11/24/040/00001/AM21/	14.07.2020	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of DPIIT vide U. O. No.: P- 47011/352/2019-TSW dated 18.08.2020:

123

Detailed calculations for the requirement of each raw material for the export product. 2. Details of other materials indigenous or imported required in the manufacturing of the cables.
Net weight per KM of cable including the weight of Indigenous Inputs.
Material balancing viz. net content of each imported and indigenous input, per KM of export product.

49 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:10/6/81-	Party Name: BAOSTEEL	Meet No/Date:6/81-	Status:
ALC2/2020	INDIA COMPANY	ALC2/2020	Approved
	PRIVATE LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0310837235
:01/81/050/00637/AM21/	:03/94/040/00259/AM21/	16.07.2020
HQ E-office Computer
No.: 23324

	Case No.:10/6/81-<br>ALC2/2020	Case No.:10/6/81-<br>ALC2/2020	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
	HQ File<br>:01/81/050/00637/AM21/<br>HQ E-office Computer<br>No.: 23324		RLA File<br>:03/94/040/00259/AM21/			Lic.No/Date:0310837235<br>16.07.2020
12<br>4	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by Consultant (SKB) as under:
	ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
	72111910	Hot Rolled Steel<br>Sheet In Coils<br>(Pickled And<br>Oiled), Grade<br>Dd11, Thickness<br>3.00 mm, Width<br>257 mm, Length C<br>mm		600 MT	72085390		Hot Rolled Steel<br>Sheet In Coils<br>(Pickled And Oiled),<br>Grade Dd11,<br>Thickness 3.00 mm,<br>Width 1035 mm,<br>Length C mm	606 MT<br>@1.01Kgs/Kg<br>content in the<br>export product
	RA concerned maytake suitable consequential action accordingly.

50 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

12 5

Case No.:13/6/81-	Party Name: JAIN	Meet No/Date:6/81-	Status:
ALC2/2020	RECYCLING PRIVATE	ALC2/2020	Approved
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:3210079610
:01/81/050/00640/AM21/	:32/24/040/00026/AM21/	16.07.2020
HQ E-office Computer No.:
23355

Case No.:13/6/81-<br>ALC2/2020	Case No.:13/6/81-<br>ALC2/2020	Case No.:13/6/81-<br>ALC2/2020	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
HQ File<br>:01/81/050/00640/AM21/<br>HQ E-office Computer No.:<br>23355			RLA File<br>:32/24/040/00026/AM21/			Lic.No/Date:3210079610<br>16.07.2020
Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 21.08.2020 for examination of the case. However, the matter was<br>deliberated in the meeting and the Committee decided ratify the ad-hoc norms taking cue from AA<br>No. 0410166392 dated 24.12.2019 approved in Meeting No. 05/81 held on 28.07.2020 as under:
Sl.<br>No.	ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
1	74031300	Refined Copper<br>Billets<br>Min Cu Content<br>- 99%		13484.000<br>Kg.	74040012		Copper scrap as<br>per ISRI Code<br>"DRUID"<br>Cu Content -<br>25% to 30%	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content
2	74031300	Refined Copper<br>Billets<br>Min Cu Content<br>- 99%		31872.000<br>Kg.	74040012		Copper scrap as<br>per ISRI Code<br>"DRUID"<br>Cu Content 30%<br>to 35%	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content
3	74031300	Refined Copper<br>Billets<br>Min Cu Content<br>- 99%		183878.000<br>Kg.	74040012		Copper scrap as<br>per ISRI Code<br>"DRUID"<br>Cu Content 35%<br>to 40%	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content
4	74031300	Refined Copper<br>Billets<br>Min Cu Content<br>- 99%		625184.000<br>Kg.	74040012		Copper scrap as<br>per ISRI Code<br>"DRUID"<br>Cu Content 40%<br>to 45%	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content
RA concerned maytake suitable consequential action accordingly.

126	Case No.:14/6/81-<br>ALC2/2020	Party Name: GAVIRANGA<br>ENTERPRISES<br>RLA File<br>:07/24/040/00109/AM21/	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00641/AM21/		Lic.No/Date:0710116762<br>17.07.2020	<br>Action By:<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>10.08.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application. The case stands deferred.

51 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:11/6/81-	Party Name: JAIN METAL	Meet No/Date:6/81-	Status:
ALC2/2020	ROLLING MILLS,	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0410166897	Action By:
:01/81/050/00638/AM21/	:04/24/040/00035/AM21/	17.07.2020	Applicant

127 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by MSME:

Certificate of Analysis of import item.

Case No.:12/6/81-	Party Name: PONDY	Meet No/Date:6/81-	Status:
ALC2/2020	OXIDES AND CHEMICALS	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166900	Action By:
:01/81/050/00639/AM21/	:04/24/040/00043/AM21/	17.07.2020	Applicant

128 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by MSME:

Certificate of Analysis of import item.

Case No.:15/6/81-	Party Name: TOSHIBA	Meet No/Date:6/81-	Status:
ALC2/2020	TRANSMISSION &	ALC2/2020	Deferred
	DISTRIBUTION SYSTEMS	11.08.2020
HQ File	RLA File	Lic.No/Date:0910068967	Action By:
:01/81/050/00642/AM21/	:09/24/040/00206/AM21/	20.07.2020	Applicant

129 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

130	Case No.:16/6/81-<br>ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00643/AM21/	RLA File<br>:09/24/040/00207/AM21/	Lic.No/Date:0910068968<br>20.07.2020	<br>Action By:<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>10.08.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

52 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:17/6/81-	Party Name: AXORA	Meet No/Date:6/81-	Status:
ALC2/2020	RESOURCES LIMITED.	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0210209991	Action By:
:01/81/050/00644/AM21/	:02/24/040/00046/AM21/	21.07.2020	Applicant

131 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

13<br>2	Case No.:21/6/81-<br>ALC2/2020	Party Name:<br>HEALTHICO QUALITY<br>PRODUCTS PRIVATE<br>LIMITED	<br>Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status: Deferred
	HQ File<br>:01/81/050/00648/AM21	RLA File<br>:56/24/040/00012/AM21	Lic.No/Date:5610005906<br>21.07.2020	Action By:<br>Consultant (TEC-<br>3)
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 04.08.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 04.08.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:18/6/81-	Party Name: INDIANA	Meet No/Date:6/81-	Status:
ALC2/2020	GRATINGS PRIVATE	ALC2/2020	Deferred
	LIMITED	11.08.2020
HQ File	RLA File	Lic.No/Date:0310837294	Action By:
:01/81/050/00645/AM21/	:03/94/040/00281/AM21/	21.07.2020	Applicant

133 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

134	Case No.:19/6/81-<br>ALC2/2020	Party Name: JINDAL<br>SAW LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Status: Deferred
	<br>HQ File<br>:01/81/050/00646/AM21/	<br>RLA File<br>:05/23/040/00084/AM21/	Lic.No/Date:0510414673<br>21.07.2020	<br>Action By:<br>Consultant(TEC-3)
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 10.08.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

53 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

135

Case No.:22/6/81-	Party Name: POLYCAB	Meet No/Date:6/81-	Status:
ALC2/2020	INDIA LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310837313	Action By:
:01/81/050/00649/AM21/	:03/95/040/00232/AM21/	22.07.2020	DPIIT

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT via email dated 20.08.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:20/6/81-	Party Name: SHIVALIK	Meet No/Date:6/81-	Status:
ALC2/2020	BIMETAL CONTROLS LTD	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0510414677	Action By:
:01/81/050/00647/AM21/	:05/24/040/00185/AM21/	22.07.2020	Applicant

136 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 07.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:23/6/81-	Party Name: DIAMOND	Meet No/Date:6/81-	Status:
ALC2/2020	ENGINEERING (CHENNAI)	ALC2/2020	Deferred
	PVT LTD	11.08.2020
HQ File	RLA File	Lic.No/Date:0410166916	Action By:
:01/81/050/00650/AM21/	:04/24/040/00050/AM21/	23.07.2020	Applicant

137 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of DPIIT vide U. O. No.: P- 47011/199/2019-TSW dated 19.08.2020:

Sl. No. 1, 3, 4, 5 & 11 of the Standard Deficiency Format.

54 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:24/6/81-	Party Name: MITTAL COIN	Meet No/Date:6/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:5610005909
:01/81/050/00651/AM21/	:56/24/040/00010/AM21/	23.07.2020
HQ E-office Computer
No.: 23357

Decision: The Committee considered the case as per agenda and noted that applicant‟s reply was sent to Consultant (SKB) on 21.08.2020. However, no comments were received. Therefore, the matter was deliberated in the meeting and the Committee decided to ratify the ad-hoc norms on repeat of 5610005766 dated 24.12.2019 approved in Meeting No. 02/81 scheduled for 29.04.2020 and held on 19.05.2020 as under : 138

ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74031300	Refined<br>Copper Billets<br>having<br>minimum<br>purity of<br>99.00%	1800.000<br>MT	74040012	Copper Scrap Druid<br>as per ISRI (copper<br>content ranging<br>from 30% to 86)	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content

Note:

1. The export item should have minimum purity of 99.00%.

Case No.:25/6/81-	Party Name: MITTAL	Meet No/Date:6/81-	Status:
ALC2/2020	APPLIANCES LIMITED	ALC2/2020	Approved
		11.08.2020
HQ File	RLA File	Lic.No/Date:5610005910
:01/81/050/00652/AM21/	:56/24/040/00009/AM21/	24.07.2020
HQ E-office Computer No.:
23358

ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74031300	Refined<br>Copper Billets<br>having<br>minimum<br>purity of<br>99.00%	700.000<br>MT	74040012	Copper Scrap Druid<br>as per ISRI (copper<br>content ranging<br>from 30% to 86%)	1.03 Kgs/Kg<br>content in the<br>export product<br>after recovery<br>of specified<br>copper content

Note:

1. The export item should have minimum purity of 99.00%. RA concerned may take suitable consequential action accordingly.

55 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:28/6/81-	Party Name: ACG	Meet No/Date:6/81-	Status:
ALC2/2020	PHARMAPACK PVT LTD	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310837425	Action By:
:01/81/050/00655/AM21/	:03/94/040/00248/AM21/	27.07.2020	Applicant

140 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:29/6/81-	Party Name: ACG	Meet No/Date:6/81-	Status:
ALC2/2020	PHARMAPACK PVT LTD	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0310837426	Action By:
:01/81/050/00656/AM21/	:03/94/040/00249/AM21/	27.07.2020	Applicant

141 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:27/6/81-	Party Name: FCI OEN	Meet No/Date:6/81-	Status:
ALC2/2020	CONNECTORS LIMITED	ALC2/2020	Deferred
		11.08.2020
HQ File	RLA File	Lic.No/Date:0710116799	Action By:
:01/81/050/00654/AM21/	:07/24/040/00089/AM21/	27.07.2020	MeitY

142 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MeitY on 17.08.2020 for examination of the case. However, MeitY vide email dated 25.06.2020 informed that the case is under examination. Hence, the Committee decided to wait for the comments.

56 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Case No.:26/6/81-<br>ALC2/2020	Case No.:26/6/81-<br>ALC2/2020	Party Name: GKEM<br>INTERNATIONAL<br>PRIVATE LIMITED	Party Name: GKEM<br>INTERNATIONAL<br>PRIVATE LIMITED	Party Name: GKEM<br>INTERNATIONAL<br>PRIVATE LIMITED	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020	Meet No/Date:6/81-<br>ALC2/2020<br>11.08.2020
HQ File<br>:01/81/050/00653/AM21/<br>HQ E-office Computer<br>No.: 23325		RLA File<br>:05/23/040/00097/AM21/			Lic.No/Date:0510414735<br>27.07.2020
Decision:The Committee considered the case as per agenda and decided to fix<br>the recommendation of Consultant (TEC-3) & Consultant (SKB) as under:							the ad-hoc norms on
ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
74081190	Bare Copper Wire<br>Or Conductors<br>1x4mm		230 MT	74071010		Copper Cc Rods<br>EC Grade	1.01Kgs/Kg<br>content in the<br>exportproduct
RA concerned maytake suitable consequential action accordingly.

57 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

Minutes of Offline cases

SI.<br>No.	Applicant's<br>Name / AA<br>No.	HQ/RA File<br>No.	Case History	Decision	Status
	HAVELLS<br>INDIA LTD.<br>0510391800<br>dated<br>29.10.2014	01/81/050/00<br>469/AM15/<br>05/23/040/00<br>332/AM15/<br>HQ E-office<br>Computer<br>No.: 23374	The case was rejected in M. No. 9/81 dated<br>11.08.2015 due to non-submission of reply of<br>DIPP deficiency letter dated 11.05.2015. The<br>applicant vide letter dated 03.01.2019 had<br>requested for ratification of the norms. The<br>case was considered in M. No. 12/81 dated<br>18.09.2019. As per NC decision, the case was<br>referred to DPIIT on 23.10.2019. The case was<br>again considered in M. No. 15/81 dated<br>30.10.2019 and the Committee noted that the<br>request has been received beyond 90 days from<br>last decision and decided to ask the applicant to<br>deposit a composition fee of Rs.5000/- for<br>considering the case along with reply of<br>deficiency letter dated 11.05.2019. As per NC<br>decision, a composition fee letter along with a<br>copy of D/L dated 11.05.2015 was sent to<br>applicant via email dated 30.10.2019. The case<br>was last considered in M. No. 21/81 dated<br>22.01.2020 and decided to seek from the<br>applicant to certain information as per<br>comments of DPIIT vide U. O. No.: P-<br>47011/309/2019-TSW dated 21.01.2020. As<br>per NC decision, D/L was sent on 05.03.2020.<br>The applicant's reply dt. 16.03.2020 was sent to<br>DPIIT via email on 16.03.2020 followed by a<br>reminder on 06.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and decided<br>tofixthe ad-hoc norms as per<br>written comments given by<br>DPIIT vide U. O. No.: P-<br>47011/309/2019-TSW<br>dated<br>22.05.2020. (Copy enclosed)<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br>Approved
R1

	TRAFOMEC<br>INDIA<br>MAGNETICS<br>PRIVATE<br>LIMITED<br>0710083779<br>dated<br>08.11.2011	01/81/050/00<br>325/AM12/<br>07/24/040/00<br>258/AM12/	The case was rejected in M. No. 9/81-<br>ALC2/2013 dated 16.07.2013 due to non-<br>submission of reply to deficiency letter dated<br>01.02.2013.<br>The<br>applicant's<br>reply<br>dated<br>30.06.2015 along with their earlier reply dated<br>17.09.2012 were forwarded to DHI on<br>19.02.2016. The case was considered in offline<br>Agenda in M. No. 23/81 & 25/81 dated<br>23.02.2016 & 07.03.2017 respectively. The<br>case was again rejected in M. No. 08/81 dated<br>11.07.2017 due to non-submission of reply to<br>deficiency<br>letter<br>dated<br>19.04.2017.<br>The<br>applicants<br>vide<br>letter<br>dated<br>01.05.2019<br>furnished reply and requested to ratify the ad-<br>hoc norms. The case was considered in M. No.<br>12/81 dt. 18.09.2019 and decided to refer the<br>case to DHI. As per decision, the case was<br>referred to DHI on 25.10.2019. As per decision<br>in M.<br>No.<br>18/81dated<br>11.12.2019, the<br>applicant‟s<br>representation/application<br>was	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that DHI<br>vide email dated 24.08.2020<br>informed that the applicant‟s<br>reply dated 17.09.2012 &<br>30.06.2015 is deficient. DHI<br>also informed that the reply of<br>deficiency<br>letter<br>dated<br>13.04.2017<br>contains<br>no<br>additional or new information.<br>Therefore,<br>the<br>Committee<br>decided to seek again from the<br>applicant to furnish the reply<br>of<br>deficiency<br>letter<br>dated<br>13.04.2017 as per advice of<br>DHI as under:<br>i. To provide calculation of<br>core and coil dimensions<br>starting from the export<br>product ratingin English	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R2

58 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			again referred to DHI on 20.01.2020. The case<br>was last considered in M. No. 24/81dated<br>18.03.2020 and as per the NC decision, the<br>complete application forward to DHI via email<br>dated 06.08.2020.	<br> <br> <br> <br>as documents submitted<br>by the applicant is in<br>French.	<br>
	BHARAT<br>HEAVY<br>ELECTRICAL<br>S LIMITED<br>1110028319<br>dated<br>12.01.2018	01/81/050/00<br>096/AM19/<br>11/24/040/00<br>006/AM18/	The case was ratified in M. No. 5/81-<br>ALC2/2018 dated 10.10.2018 as per written<br>comments of DHI vide U. O. No. DES-<br>2/BHEL/GTr/2018-TW-HEI.<br>The<br>applicant<br>vide their email dated 26.11.2018 requested for<br>revision of ratified norms. The case was<br>considered in M. No. 12/81 dated 18.09.2019,<br>15/81 dated 30.10.2019 and 18/81 dated<br>11.12.2019 and decided to send the applicant‟s<br>representation/application to DHI immediately.<br>The case was last considered in M. No. 24/81<br>dated 18.03.2020 and as per the NC decision,<br>the complete set of application was sent to DHI<br>via email dated 07.08.2020. However, no<br>comments have been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind DHI for expediting the<br>comments.	<br> <br>Deferred
R3

	BHARAT<br>HEAVY<br>ELECTRICAL<br>S LIMITED<br>1110018794<br>dated<br>27.10.2008	01/81/050/00<br>492/AM09/<br>11/24/040/00<br>024/AM09/	The case was ratified in M. No. 18/81 dated<br>04.08.2009 as per written comments of DHI<br>vide U. O. No. 3(7)/2009/TSW(B)/334 dated<br>19.08.2009.<br>The applicant vide letter dated 09.07.2018 had<br>requested for revision of norms on actual<br>import/utilization for import items at Sl. No. 3,<br>4, 9, 17, 20, 21, 24, 43 and 55 with<br>justification. The case was last considered in<br>M. No. 12/81 dt. 18.09.2019 and 15/81 dt.<br>30.10.2019 and decided to call the applicant on<br>personal hearing to explain the case. As per<br>NC decision email dated 28.11.2019 sent to the<br>applicant<br>requesting<br>to<br>attend<br>PH<br>on<br>11.12.2019. The Committee considered the<br>case in M. No. 18/81 dated 11.12.2019 and<br>heard the applicant‟s representative during<br>personal hearing. The Committee decided to<br>refer the matter to DHI for further examination<br>of the case. The case was last considered in M.<br>No. 24/81 dated 18.03.2020 and as per the NC<br>decision, the complete set of application was<br>sent to DHI via email dated 07.08.2020.<br>However, no comments have been received<br>yet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind DHI for expediting the<br>comments.	<br> <br>Deferred
R4

	TUBEX<br>INDIA<br>0510400849<br>dated<br>19.12.2016	01/81/050/00<br>544/AM17/<br>05/24/040/00<br>459/AM17/	The case was rejected in M. No. 8/81-<br>ALC2/2017 dated 11.07.2017 due to non-<br>submission of reply of deficiency letter dated<br>14.02.2017 as raised by DIPP vide U. O. No.<br>12/5/2017-TSW/103 dated 24 /01/2017. This<br>case was considered in M. No. 12/81 dt.<br>18.09.2019 and the Committee noted that the	<br> <br> <br> <br>The Committee considered the<br>case as per the agenda and<br>noted that a deficiency letter<br>seeking following information<br>as raised by Consultant (TEC-<br>3) was sent to the applicant on	<br> <br> <br> <br> <br>Deferred
R5

				<br>18.08.2020:

59 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

				applicant had not furnished the reply of<br>deficiency letter dated 14.02.2017. As per NC<br>decision, an email was sent to the applicant on<br>22.10.2019 along with a copy of D/L dt.<br>14.02.2017 followed by a reminder on<br>03.12.2019. As per NC decision of M. No.<br>21/81dated 22.01.2020, the case was referred<br>to Consultant (TEC-3) on 17.03.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and decided to wait for comments.	applicant had not furnished the reply of<br>deficiency letter dated 14.02.2017. As per NC<br>decision, an email was sent to the applicant on<br>22.10.2019 along with a copy of D/L dt.<br>14.02.2017 followed by a reminder on<br>03.12.2019. As per NC decision of M. No.<br>21/81dated 22.01.2020, the case was referred<br>to Consultant (TEC-3) on 17.03.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and decided to wait for comments.	<br> <br> <br> <br> <br> <br> <br> <br> <br>1. Documents for sale of<br>scrap indicating price.<br>2. Documents for CIF value<br>imported inputs /items.<br>However, no reply has been<br>received<br>yet.<br>Hence,<br>the<br>Committee decided to wait for<br>reply of the applicant.	<br> <br> <br> <br> <br> <br> <br> <br> <br>1. Documents for sale of<br>scrap indicating price.<br>2. Documents for CIF value<br>imported inputs /items.<br>However, no reply has been<br>received<br>yet.<br>Hence,<br>the<br>Committee decided to wait for<br>reply of the applicant.	<br> <br> <br> <br> <br> <br> <br> <br> <br>1. Documents for sale of<br>scrap indicating price.<br>2. Documents for CIF value<br>imported inputs /items.<br>However, no reply has been<br>received<br>yet.<br>Hence,<br>the<br>Committee decided to wait for<br>reply of the applicant.	<br> <br> <br> <br> <br> <br> <br> <br> <br>1. Documents for sale of<br>scrap indicating price.<br>2. Documents for CIF value<br>imported inputs /items.<br>However, no reply has been<br>received<br>yet.<br>Hence,<br>the<br>Committee decided to wait for<br>reply of the applicant.	<br> <br> <br> <br> <br> <br> <br> <br> <br>1. Documents for sale of<br>scrap indicating price.<br>2. Documents for CIF value<br>imported inputs /items.<br>However, no reply has been<br>received<br>yet.<br>Hence,<br>the<br>Committee decided to wait for<br>reply of the applicant.	<br> <br> <br> <br>
	SHINKWANG<br>ELECTRONI<br>CS PRIVATE<br>LIMITED<br>0510339369<br>dated<br>23.11.2012		<br>01/81/050/00<br>419/AM13/<br>05/24/040/00<br>313/AM13/<br>HQ E-office<br>Computer<br>No.: 23375	The case was rejected in M. No. 15/81-<br>ALC2/2013 dated 08.10.2013 due to non-<br>submission of reply to MSME deficiency letter<br>vide<br>U.O.<br>No.<br>30(294)2011-ME<br>dated<br>26.2.2013.<br>The applicant vide letter dated 10.09.2019 has<br>requested to ratify the norms. However, the<br>applicant had not furnished reply to deficiency<br>letter. As per NC decision, Composition fee<br>along with copy of D/L dt. 26.02.2013 was<br>sent to the applicant via email dt. 30.10.2019.<br>The receipt of composition fee dt. 14.01.2020<br>received on 20.01.2020. The case was referred<br>to MSME on 21.01.2020. The case was last<br>considered in M. No. 24/81 dt. 18.03.2020 and<br>decided to wait for comments. A reminder was<br>issued to MSME on 06.08.2020.		<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and decided<br>tofixthe ad-hoc norms as per<br>written comments given by<br>MSME<br>vide<br>email<br>dated<br>11.08.2020 as under:					<br> <br> <br> <br> <br>Approved
R6

	ITCHS<br>Code	Export Item			Quantity	ITCHS<br>Code		Import<br>Item		Recommended<br>Quantity
	85044030	Injection Moulded Plastic Components Mobile<br>Phone Battery Charger (Lower Charger Case<br>With Insert Pin)			1840000<br>Number	73269099		Insert<br>Pin		As per GN-4
	RA concerned maytake suitable consequential action accordingly.
	TUBE<br>PRODUCTS<br>INCORPORA<br>TE<br>3410014376<br>dated<br>19.09.2005		01/81/162/00<br>580/AM11/<br>34/24/040/00<br>133/AM06/<br>HQ E-office<br>Computer<br>No.: 23376	The case was considered in Offline Agenda in<br>M. No. 32/81dated 25.10.2011 and decided to<br>reject the request of applicant to allow import<br>of Alloy Steel Coil as the above license is<br>issued under SION and inputs are allowed as<br>per SION. The applicant vide letter dated<br>03.05.2012 had requested the PRC for<br>realization of policy to accommodate use of<br>utilization of Alloy Steel in Coil in place of<br>Plate. The case was considered in PRC in<br>Meeting<br>No.14/81dated<br>17.07.2012<br>and<br>decided to reject the request to allow input<br>which is not part of SION. The PRC vide letter<br>dated 07.06.2019 advised the applicant to<br>approach the concerned NC for a decision in<br>the matter. Now, the applicant vide letter dated<br>11.07.2019<br>has<br>enclosed<br>copies<br>of		<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and noted<br>the written comments dated<br>17.3.2020 given by Consultant<br>(SKB). After deliberating the<br>matter, the Committee decided<br>to seek from the applicant an<br>statement<br>for<br>import<br>item<br>„Plate/Coil‟ in the following<br>format:					<br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R7

						<br> <br> <br> <br> <br> <br>Bill<br>of<br>entry<br>No.<br>and<br>date	Exac<br>t<br>descr<br>iptio<br>n		Exac<br>t<br>thick<br>ness	Qua<br>ntity

60 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			communications<br>and<br>other<br>supporting<br>documents and requested to ratify the norms.<br>The case was considered in M. No. 18/81 dated<br>11.12.2019 and the applicant‟s representative<br>didn‟t explain the technical details before<br>Norms Committee during personal hearing. On<br>the<br>request<br>of<br>the<br>representative,<br>the<br>Committee decided to grant one more<br>opportunity of personal hearing to the applicant<br>in the forthcoming NC meeting. PH letter sent<br>on 10.0.2020 requesting to appear for PH on<br>22.01.2020. The case was last considered in M.<br>No. 21/81 dated 22.01.2020 and the Committee<br>heard the applicant‟s representative during<br>personal hearing. The Committee directed to<br>the<br>representative<br>to<br>furnish<br>following<br>information as per advice of Consultant (SKB):<br>1. Exact details of export items. 2. Use of exact<br>raw materials. 3. To provide explanation for<br>why value addition is low. 4. Type of grade of<br>material<br>used.<br>As per NC decision, D/L was sent to the<br>applicant on 05.03.2020. The applicant's reply<br>was sent to Consultant (SKB) via email on<br>16.03.2020. The case was last considered in M.<br>No. 24/81 dt. 18.03.2020 and decided to wait<br>for comments.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
	NSIL<br>EXPORTS<br>LIMITED<br>5610004970<br>dated<br>08.08.2016	01/81/050/00<br>300/AM17/<br>56/24/040/00<br>025/AM17/<br>HQ E-office<br>Computer<br>No.: 23377	The case was rejected in M. No. 7/81-<br>ALC2/2018 dated 29.11.2018 on the ground<br>that no information was received from the<br>applicant regarding license amendment sheet<br>for export product description as per MoS vide<br>U.O. No. 2(11)/2016-TD dated 29.12.2017.<br>The applicant vide letter dated 17.12.2018 had<br>furnished reply and requested to ratify the<br>norms. As per decision of M. No. 12/81 dt.<br>18.09.2019, the case was referred to MoS on<br>24.10.2019 followed by an I.D. reminder on<br>20.01.2020. In M. No. 21/81 dated 22.01.2020<br>the representative of MoS informed in meeting<br>that the case is under examination. Therefore,<br>the Committee decided to wait for the<br>comments. The case was last considered in M.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and decided<br>tofixthe ad-hoc norms as per<br>written comments given by<br>Consultant<br>(SKB).<br>(Copy<br>enclosed)<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br>Approved
R8

			No. 24/81 dt. 18.03.2020 and decided to refer<br>the case to Consultant (SKB) for examination<br>as no comments are being furnished by MoS.<br>As per decision, the case was referred to<br>Consultant(SKB)on 07.08.2020.
	STERLITE<br>POWER<br>TRANSMISSI<br>ON LIMITED	01/81/050/00<br>030/AM19/	The case was rejected in M. No. 11/81-<br>ALC2/2018 dated 30.01.2019 due to non-<br>submission of reply to deficiency letter<br>dated18.10.2018. The applicant vide letter	<br> <br>The Committee decided to wait<br>for the comments.	<br>Deferred
R9

61 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	0310819587<br>Dated<br>07.03.2018	03/95/040/00<br>921/AM18/	received on 17.01.2019 had furnished the reply<br>& requested for ratification of ad-hoc norms.<br>As per decision of M. No. 12/81 dt.<br>18.09.2019, the case was referred to DPIIT on<br>28.10.2019. The case was considered in M. No.<br>18/81dated 11.12.2019 and decided to send the<br>applicant‟s<br>representation/application<br>to<br>DPIIT. As per NC decision, the case was<br>referred to DPIIT on 20.01.2020. The case was<br>considered in M. No. 21/81dated 22.01.2020<br>and decided to wait for comments. The case	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
			was last considered in M. No. 24/81 dt.
			18.03.2020 and decided to remind DPIIT for<br>expediting the comments. Reminder was issued<br>to DPIIT on 05.08.2020. Again, the complete<br>set of application along with applicant‟s reply<br>forwarded<br>to<br>DPIIT<br>via<br>email<br>dated<br>18.08.2020. However, no comments have been<br>receivedyet.
	<br>BILCARE<br>LIMITED<br>3110066383<br>dated<br>25.10.2016	01/81/050/00<br>442/AM17/<br>31/83/040/00<br>099/AM17/	The case was ratified in M. No. 03/81 dated<br>14.08.2018 as per written comments of DIPP<br>as approved for AA No. 3110066596 dated<br>17.02.2017 ratified in M. No. 19/81 dated<br>05.12.2017. The applicant vide letter dated<br>31.10.2018 has requested for revision of<br>ratified norms. The case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to seek<br>from the applicant to furnish following<br>information as per advice of Consultant (TEC-<br>1): (1.) Percentage net content of import item<br>no. 1 to 3 in export product. (2.) Percentage net<br>content of import item no. 4 & 5 on solid<br>content basis. As per NC decision, D/L was<br>issued on 14.10.2019. The applicant's reply<br>was sent to Consultant (TEC-1) on 31.01.2020<br>as decided in M. No. 21/81 dated 22.01.2020.<br>The case was last considered in meeting no.<br>24/81 dt. 18.03.2020 and decided to call the<br>applicant on personal hearing to explain the<br>case. As per NC decision, an email dated<br>24.08.2020 was sent to the applicant requesting<br>to attend PH on 25.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that the<br>firm was called for personal<br>hearing<br>via<br>video<br>conferencing. However, the<br>applicant<br>via<br>email<br>dated<br>24.08.2020 requested to grant<br>personal hearing after one<br>month.<br>Therefore,<br>the<br>Committee decided to call the<br>applicant to attend personal<br>hearing in the forthcoming NC<br>meeting.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R10

	<br>ARMOR<br>PLAST<br>LIMITED<br>0710113842<br>dated<br>12.09.2018	01/81/050/00<br>655/AM19/<br>07/24/040/00<br>156/AM19/	The case was ratified in M. No. 05/81 dated<br>12.06.2019 on repeat basis as approved for AA<br>No.0710111799 dated 21.06.2017 in M. No.<br>3/81-ALC2/2019<br>dated<br>15.05.2019<br>as<br>recommended<br>by<br>Consultant<br>(TEC-3).<br>The applicant vide letter dated 15.07.2019 has<br>requested for revision of ratified norms. This<br>case was considered in M. No. 12/81 dt.<br>18.09.2019 and decided to ask the applicant to<br>furnish copies of shippingbills. Asper NC	<br> <br> <br>The Committee considered the<br>case as per the agenda and<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
				<br>that the applicant in its reply
				<br>dated 11.08.2020 has given
R11
				<br>only photograph of the cutter

				<br>instead of drawing of cutter.
				<br>Therefore,<br>the<br>Committee
				<br>decided to seek from the
				<br>applicant to furnish following

62 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			decision, D/L was issued on 14.10.2019 along<br>with reminder on 03.12.2019. As per NC<br>decision of M. No. 21/81 dated 22.01.2020, the<br>applicant's reply was referred to Consultant<br>(TEC-3) on 31.01.2020. The case was last	<br>information as per advice of
				<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Consultant (TEC-3):<br>1. Detailed drawing of cutter.<br>The case stands deferred.
			considered in meeting no. 24/81 dt. 18.03.2020
			and Consultant (TEC-3) informed that the<br>applicant had submitted copy of many shipping<br>bills and in some of shipping bills word<br>“Cannula” is mentioned and in few bills word<br>“Cutter”<br>is<br>mentioned.<br>Therefore,<br>the<br>Committee decided to ask the applicant to<br>explain why he is making export of „Cutter‟<br>under the authorization and why such exports<br>should not be disallowed. As per decision of<br>M. No. 24/81 dated 18.03.2020, D/L as raised<br>by Consultant (TEC-3) was sent to the
			applicant on 18.05.2020 followed by reminder
			on 10.08.2020. The applicant‟s reply dt.
			11.08.2020 was sent to Consultant (TEC-3) on<br>13.08.2020.
	<br>ARMOR<br>PLAST LTD<br>0710113649<br>Dated<br>27.07.2018	01/81/050/00<br>448/AM19/<br>07/24/040/00<br>110/AM19/	The case was approved in M. No. 5/81-<br>ALC2/2019 dated 12.06.2019 on repeat basis<br>as approved for AA No. 0710111799 dated<br>21.06.2017 in M. No. 3/81-ALC2/2019 dated<br>15.05.2019<br>on<br>the<br>recommendation<br>of<br>Consultant (TEC-3). The applicant vide letter<br>dated 15.07.2019 stated that they had already<br>completed the export obligation against the AA<br>and there is no provision to amend the export<br>shipping bills from the customs. Therefore,<br>they had requested to remove the word "Tubes"<br>from the export item. The case was considered<br>in M. No. 12/81 dt. 18.09.2019 and decided to<br>ask the applicant to furnish copies of shipping<br>bills. As per NC decision, D/L was sent on<br>14.10.2019<br>along<br>with<br>reminder<br>on<br>03.12.2019. As per NC decision of M. No.<br>21/81 dated 22.01.2020, the applicant's reply<br>was referred to Consultant (TEC-3) on<br>31.01.2020. The case was last considered in	<br> <br>The Committee considered the<br>case as per the agenda and<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
				<br>that the applicant in its reply
				<br>dated 11.08.2020 has given
				<br>only photograph of the cutter
				<br>instead of drawing of cutter.
				<br>Therefore,<br>the<br>Committee
				<br>decided to seek from the
				<br>applicant to furnish following
				<br>information as per advice of
				<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Consultant (TEC-3):<br>1. Detailed<br>drawing<br>of<br>cutter.<br>The case stands deferred.
R12

			meeting<br>no.<br>24/81<br>dt.<br>18.03.2020<br>and
			Consultant (TEC-3) informed that the applicant<br>had submitted copy of many shipping bills and<br>in some of shipping bills word “Cannula” is<br>mentioned and in few bills word “Cutter” is<br>mentioned. Therefore, the Committee decided<br>to ask the applicant to explain why he is<br>making<br>export<br>of<br>„Cutter‟<br>under<br>the<br>authorization and why such exports should not<br>be disallowed. As per decision of M. No. 24/81<br>dated 18.03.2020,D/L as raised byConsultant

63 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			(TEC-3) was sent to the applicant on	<br> <br> <br>
			18.05.2020<br>followed<br>by<br>reminder<br>on
			10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.
			11.08.2020 was sent to Consultant (TEC-3) on<br>13.08.2020.
	<br>ARMOR<br>PLAST LTD<br>0710112339<br>dated<br>01.11.2017	01/81/050/00<br>884/AM19/<br>07/24/040/00<br>217/AM18/	The case was ratified in M. No. 4/81 dated<br>29.05.2019 as recommended by Consultant<br>(TEC-3).<br>The applicant vide letter dated 15.06.2019<br>stated that they had already completed the<br>export obligation against the AA and there is<br>no provision to amend the export shipping bills<br>from the customs. Therefore, they had<br>requested to remove the word "Tubes" from the<br>export item. This case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to ask<br>the applicant to furnish copies of shipping bills.<br>As per NC decision, D/L was sent on<br>14.10.2019<br>along<br>with<br>reminder<br>on<br>03.12.2019. The case was considered in M. No.<br>21/81 dated 22.01.2020, the applicant's reply<br>was referred to Consultant (TEC-3) on<br>31.01.2020. The case was last considered in	<br> <br>The Committee considered the<br>case as per the agenda and<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
				<br>that the applicant in its reply
				<br>dated 11.08.2020 has given
				<br>only photograph of the cutter
				<br>instead of drawing of cutter.
				<br>Therefore,<br>the<br>Committee
				<br>decided to seek from the
				<br>applicant to furnish following
				<br>information as per advice of
				<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Consultant (TEC-3):<br>1. Detailed<br>drawing<br>of<br>cutter.<br>The case stands deferred.
			meeting<br>no.<br>24/81<br>dt.<br>18.03.2020<br>and
			Consultant (TEC-3) informed that the applicant<br>had submitted copy of many shipping bills and<br>in some of shipping bills word “Cannula” is<br>mentioned and in few bills word “Cutter” is<br>mentioned. Therefore, the Committee decided<br>to ask the applicant to explain why he is<br>making<br>export<br>of<br>„Cutter‟<br>under<br>the<br>authorization and why such exports should not<br>be disallowed. As per decision of M. No. 24/81<br>dated 18.03.2020, D/L as raised by Consultant<br>(TEC-3) was sent to the applicant on
R13

			18.05.2020<br>followed<br>by<br>reminder<br>on
			10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.
			11.08.2020 was sent to Consultant (TEC-3) on<br>13.08.2020.

64 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	<br>POLYCAB<br>WIRES PVT.<br>LTD.<br>0310818064<br>dated<br>28.12.2017	01/81/050/00<br>018/AM19/<br>03/95/040/00<br>787/AM18/<br>HQ E-office<br>Computer<br>No.: 23378	The case was ratified in M. No. 2/81-<br>ALC2/2018 dated 29.05.2018 (actually held on<br>18.07.2018)<br>taking<br>cue<br>from<br>AA<br>No.<br>0310815474 dated 01.09.2017 ratified in M.<br>No. 23/81-ALC2/2017 dated 06.03.2018. The<br>applicant<br>vide<br>letter<br>dated<br>12.12.2018<br>requested for revision of ratified norms. In M.<br>No. 21/81dated 22.01.2020, Consultant (TEC-<br>3) informed that the wastage of item at Sl. No.<br>7 & 8 has interchanged and needs correction.<br>Therefore, the Committee decided to ask from<br>the applicant to provide clarification for the<br>same. As per NC decision, D/L was sent to the<br>applicant on 05.03.2020. As per decision of M.<br>No. 24/81 dated 18.03.2020, D/L reminder was	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case<br>as<br>per<br>agenda<br>and<br>Consultant (TEC-3) informed<br>that the applicant in its reply<br>dated<br>08.08.2020<br>has<br>not<br>provided clarification on the<br>wastage of item at Sl. No. 7 &<br>8<br>which<br>seems<br>to<br>be<br>interchanged<br>and<br>hence,<br>correction required. Therefore,<br>the Committee decided to<br>revise the ad-hoc norms as per<br>advice of Consultant (TEC-3)<br>as under:<br>1. Quantity of import item<br>at<br>Sl.<br>No.<br>7<br>i.e.<br>Galvanised Steel Wire<br>may be allowed as 1.02<br>Kgs./Kg. content in the<br>export items at Sl. No. 2,<br>3, 4, 6 & 7.<br>2. Quantity of import item<br>at Sl. No. 8 i.e. Copper<br>Tape may be allowed as<br>1.01 Kgs/Kg content in<br>the export items at Sl.<br>No.2, 3, 4 & 8.<br>Note: The decision for rest of<br>the import items will remain<br>same as decided in M. No.<br>2/81-ALC2/2018<br>dated<br>29.05.2018 (actually held on<br>18.07.2018).<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R14

			sent to the applicant on 07.08.2020. The
			applicant‟s reply dt. 08.08.2020 was sent to
			Consultant (TEC-3) via email on 10.08.2020.
	<br>PILOT<br>INDUSTRIES<br>LTD.<br>0510402645<br>dated<br>19.05.2017	01/81/050/00<br>199/AM18/<br>05/24/040/00<br>073/AM18/	The case was ratified in M. No. 3/81-<br>ALC2/2018 dated 14.08.2018 by allowing<br>wastage<br>of<br>5%.<br>The applicant via email dated 21.11.2018<br>requested for revision of ratified norms. The<br>case was considered in M. No. 12/81 dt.<br>18.09.2019 and decided to refer the case to<br>DPIIT for examination. As per decision of<br>meeting no. M. No. 21/81dated 22.01.2020, the<br>representation was forwarded to DPIIT via<br>email dated 16.03.2020. The case was last	<br>The Committee considered the<br>case as per the agenda and	<br> <br> <br> <br> <br> <br>Deferred
				<br> <br> <br>decided to seek from the
				<br>applicant to furnish following
				<br>information as per comments
				<br>given by MSME via email
				<br> <br>dated 25.08.2020:
R15

				<br> <br>1. Certificate of analysis.
				<br>2. Manufacturing process
				<br> <br> <br>with step-wise wastage.
			considered in meeting no. 24/81 dt. 18.03.2020	<br> <br> <br>The case stands deferred.
			and decided to wait for comments. A reminder
			was issued to DPIIT on 23.04.2020 &

65 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

||||||||
|---|---|---|---|---|---|---|
|||||05.08.2020. As per DPIIT recommendation<br>dated 11.08.2020, the case was referred to<br>MSME via email dated 13.08.2020.|<br>||
||||||<br>||
||<br>VINDHYA<br>TELELINKS<br>LTD.<br>1110025730<br>dated<br>19.09.2011||01/81/050/00<br>558/AM18/<br>11/24/040/00<br>027/AM12/|The case was ratified in M. No. 3/81-<br>ALC2/2018 dated 14.08.2018 as per DoT<br>comments vide OM No. 15-02/207-IP dated<br>14.05.2018. The applicant vide letters dated<br>22.10.2018 and 09.11.2018 requested for<br>revision of ratified norms. The case was<br>considered in M. No. 12/81 dt. 18.09.2019 and<br>decided to refer the case to DoT for<br>examination. As per the decision of M. No.<br>18/81dated<br>11.12.2019,<br>the<br>applicant‟s<br>representation/application sent to DoT on<br>21.11.2019 along with reminder on 17.03.2020<br>for expediting the comments. The case was last<br>considered in M. No. 24/81 dt. 18.03.2020 and<br>decided to seek from the applicant to furnish<br>the detailed calculations of wastage claimed as<br>per advice of the representative of DoT.  As<br>per NC decision, D/L was sent to applicant on<br>18.05.2020<br>followed<br>by<br>reminder<br>on<br>10.08.2020. However, no reply has been<br>receivedyet.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind again the applicant for<br>furnishing<br>the<br>requisite<br>information.|Deferred|
||||||||
|R16|||||||
||||||||
||||||||
||||||<br> <br>||
||<br>ANGLO<br>STEEL PVT.<br>LIMITED<br>0310796525<br>dated<br>09.06.2015||01/81/050/00<br>185/AM16/<br>03/94/040/00<br>165/AM16/|The case was approved in Norms Committee-II<br>special meeting held on 11.12.2017. The<br>applicant via email dated 04.05.2019 requested<br>to correct the AA No. 0310796525 instead of<br>0310798525. The case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to refer<br>the case to Consultant (TEC-3). The case was<br>last considered in M. No. 24/81 dated<br>18.03.2020, The Committee noted that the<br>complete set of representation/documents has<br>not yet been referred to Consultant (TEC-3) as<br>decided in M. No. 21/81dated 22.01.2020.<br>Therefore, the Committee directed to forward<br>all the relevant documents to Consultant (TEC-<br>3) immediately.  Scanned copies of complete<br>set<br>of<br>applications<br>along<br>with<br>all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order was sought<br>from<br>the<br>applicant<br>vide<br>email<br>dated|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that the<br>applicant<br>via<br>email<br>dated<br>11.08.2020 requested for some<br>more time to submit the<br>complete<br>application<br>and<br>alongwith relevant documents.<br>Therefore,<br>the<br>Committee<br>decided to wait for reply of the<br>applicant.<br>|Deferred|
||||||||
|R17|||||||
||||||||
||||||||
|||||10.08.2020.|||
||<br>ANGLO<br>STEEL PVT.<br>LIMITED<br>0310796526<br>dated<br>09.06.2015||01/81/050/00<br>184/AM16/<br>03/94/040/00<br>173/AM16/|The case was approved in Norms Committee-II<br>Special Meeting held on 11.12.2017. The<br>applicant via email dated 04.05.2019 requested<br>to correct the AA No. 0310796526 instead of<br>0310798526. The case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to refer<br>the case to Consultant (TEC-3). The case was<br>last considered in M. No. 24/81 dated|<br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that the<br>applicant<br>via<br>email<br>dated<br>11.08.2020 requested for some<br>more time to submit the<br>complete<br>application<br>and<br>alongwith relevant documents.<br>Therefore,<br>the<br>Committee<br>decided to wait for replyof the<br>|Deferred|
|R18|||||||
||||||||
||||||||
|||66| **P ag e 7 8** Minutes of NC-II MeetingNo. 06/81 scheduled for 11.08.2020 and held on 25.08.2020|||||

66 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			18.03.2020, The Committee noted that the<br>complete set of representation/documents has<br>not yet been referred to Consultant (TEC-3) as<br>decided in M. No. 21/81dated 22.01.2020.<br>Therefore, the Committee directed to forward<br>all the relevant documents to Consultant (TEC-<br>3) immediately. Scanned copies of complete<br>set<br>of<br>applications<br>along<br>with<br>all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order was sought<br>from<br>the<br>applicant<br>vide<br>email<br>dated<br>10.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>applicant.
	<br>ANGLO<br>STEEL PVT.<br>LIMITED<br>0310796527<br>dated<br>09.06.2015	01/81/050/00<br>186/AM16/<br>03/94/040/00<br>182/AM16/	The case was approved in Norms Committee-II<br>Special Meeting held on 11.12.2017. The<br>applicant via email dated 04.05.2019 has<br>requested to correct the AA No. 0310796527<br>instead of 0310798527. The case was last<br>considered in M. No. 12/81 dt. 18.09.2019 and<br>decided to refer the case to Consultant (TEC-<br>3). The case was last considered in M. No.<br>24/81 dated 18.03.2020, The Committee noted<br>that<br>the<br>complete<br>set<br>of<br>representation/documents has not yet been<br>referred to Consultant (TEC-3) as decided in<br>M. No. 21/81dated 22.01.2020. Therefore, the<br>Committee directed to forward all the relevant<br>documents<br>to<br>Consultant<br>(TEC-3)<br>immediately. Scanned copies of complete set<br>of applications along with all concerned/related<br>documents (reply to queries raised etc.) in<br>chronological order was sought from the<br>applicant vide email dated 10.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that the<br>applicant<br>via<br>email<br>dated<br>11.08.2020 requested for some<br>more time to submit the<br>complete<br>application<br>and<br>alongwith relevant documents.<br>Therefore,<br>the<br>Committee<br>decided to wait for reply of the<br>applicant.	<br> <br> <br> <br> <br> <br> <br> <br>Deferred
R19

	<br>NAGREEKA<br>INDCON<br>PRODUCTS<br>(P) LTD.<br>0310815357<br>dated<br>23.08.2017	01/81/050/00<br>336/AM18/<br>03/95/040/00<br>343/AM18/	The case was ratified in M. No. 2/81-<br>ALC2/2018 dated 29.05.2018 by allowing the<br>quantity of import item 1.05 Kg/Kg content in<br>the export product. The applicant vide letter<br>dated 18.03.2019 requested for revision of<br>ratified norms. As per decision of M. No.<br>12/81 dt. 18.09.2019, the case was referred to<br>DPIIT on 28.10.2019. In M. No. 15/81 dt.<br>30.10.2019, on the request of DPIIT, the<br>Committee decided to send again a copy of<br>application/representation<br>to<br>DPIIT<br>on<br>09.12.2019 for examination. The case was last<br>considered in M. No. 21/81 dated 22.01.2020<br>and decided to seek from the applicant to<br>furnish the following information as per<br>written comments given by DPIIT vide U. O.<br>No.:<br>P-47011/354/2019-TSW<br>dated<br>21.01.2020: Sl. No. 3 & 11 of the SDF. As per<br>NC decision, D/L was sent to the applicant on<br>05.03.2020.<br>The<br>applicant's<br>reply<br>dt.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and noted<br>the comments of DPIIT vide<br>U. O. No.: P-47011/354/2019-<br>TSW<br>dated<br>05.05.2020<br>wherein DPIIT stated that the<br>applicant asked for wastage on<br>different products (Aluminium<br>Foil containers- other than<br>having<br>rectangular/<br>square<br>shape) is 16 to 20%. However,<br>as the aluminium foil scrap has<br>recoverable value. Therefore,<br>the Committee decided to seek<br>from the applicant to furnish<br>following information as per<br>comments given by DPIIT:<br>1. To provide sale price of<br>Aluminium<br>foil<br>scrap	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R20

67 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			13.03.2020 was sent to DPIIT via email on<br>16.03.2020. Also, the applicant's hardcopy<br>reply dt. 12.03.2020 along with samples sent to<br>DPIIT on 18.03.2020. The case was last	<br> <br> <br> <br> <br>generated<br>during<br>the<br>manufacturing<br>process<br>supported by documentary<br>evidence like copies of sale<br>invoice etc.<br>The case stands deferred.	<br> <br> <br>
			considered in M. No. 24/81 dt. 18.03.2020 and
			decided to wait for the comments.
	<br>NATIONAL<br>STEEL AND<br>AGRO<br>INDUSTRIES<br>LTD.<br>5610005104<br>dated<br>23.03.2017	01/81/050/0<br>0187/AM18/<br>56/24/040/00<br>051/AM17/	The case was ratified in M. No. 9/81-<br>ALC2/2018 dated 02.01.2019 as per written<br>comments of MoS vide U. O. No.: 2(6)/2017-<br>TD dated 13.12.2018. The applicant vide letter<br>dated 25.04.2019 requested for revision of<br>ratified norms as per the statement of the actual<br>export made under the AA. As per decision of<br>M. No. 12/81 dt. 18.09.2019, the case was<br>referred to MoS on 25.10.2019 followed by an<br>I.D. reminder on 20.01.2020. In M. No. 21/81<br>dated 22.01.2020 the representative of MoS<br>informed that the case is under examination.<br>Therefore, the Committee decided to wait for<br>the comments. The case was last considered in	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>refer the case to Consultant<br>(SKB) for examination as no<br>comments are being furnished<br>by MoS.	<br> <br> <br> <br>Deferred
R21

			M. No. 24/81 dt. 18.03.2020 and decided to<br>remind MoS to expedite the comments. A<br>reminder was issued to MoS on 07.08.2020.<br>However, no comments have been received<br>yet.
	<br>SVAM<br>PACKAGING<br>INDUSTRIES<br>PRIVATE<br>LIMITED<br>0510398071<br>dated<br>30.03.2016	01/81/050/00<br>173/AM17/<br>05/24/040/00<br>626/AM16/	The case was ratified in M. No. 4/81-<br>ALC2/2018 dated 27.08.2018 as per written<br>comments of DIPP vide F. No. 7/176/2018-<br>TSW dated 27.06.2018. The applicant vide<br>letter dated 10.10.2018 requested for revision<br>of ratified norms. As per decision of M. No.<br>12/81 dt. 18.09.2019, the case was referred to<br>DPIIT on 28.10.2019 followed by a reminder<br>on 20.01.2020. As per NC decision of M. No.<br>21/81 dated 22.01.2020 a complete set of<br>application/ representation was referred to<br>DPIIT on 13.02.2020. The case was last	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind<br>again<br>DPIIT<br>for<br>expediting the comments.	<br> <br>Deferred
R22

			considered in M. No. 24/81 dt. 18.03.2020 and
			decided to remind DPIIT to expedite the<br>comments. A reminder was issued to DPIIT on<br>07.08.2020. However, no comments have been<br>receivedyet.
	<br>VEDANTA<br>LIMITED<br>3510044672<br>dated<br>17.02.2015	01/81/171/00<br>019/AM16/<br>35/24/039/00<br>003/AM15/	The case was ratified in M. No. 01/81 dated<br>10.04.2019 as per written comments given by<br>Consultant (TEC-3). The applicant vide letter<br>dated 06.06.2019 requested for revision of<br>ratified norms. The case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to refer<br>the<br>case<br>to<br>Consultant<br>(TEC-3)<br>for<br>examination. The case was referred to<br>Consultant(TEC-3)on 06.12.2019. The case	<br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>heard<br>the<br>representatives of the applicant<br>during personal hearing held<br>through video conferencing.<br>On the advice of Consultant<br>(TEC-3),<br>the<br>Committee<br>directed the representatives to<br>furnish following information:	<br> <br> <br> <br> <br> <br> <br>Deferred
R23

68 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

			was last considered in M. No. 21/81 dated<br>22.01.2020, Consultant (TEC-3) informed that<br>the applicant has requested for wastage on gold<br>& silver for which there is no justification.<br>Therefore, the Committee decided to call the<br>applicant for personal hearing to explain the<br>case<br>before<br>Norms<br>Committee<br>in<br>the<br>forthcoming NC meeting. As per NC decision,<br>an email dated 13.03.2020 sent to the applicant<br>to attend PH on 18.03.2020. The case was last<br>considered in M. No. 24/81 dt. 18.03.2020 and<br>the Committee noted that nobody appeared to<br>attend the personal hearing on behalf of the<br>applicant. Therefore, the Committee decided to<br>give one more opportunity to the applicant for<br>personal hearing. As per NC decision, an email<br>dated 24.08.2020 was sent to the applicant<br>requestingto attend PH on 25.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>1. Specific item of import,<br>its quantity & copy of<br>bill of entry.<br>2. Specific item of export,<br>its quantity & copy of<br>shipping bill.<br>3. Certificate of analysis of<br>total quantity of import &<br>export.<br>4. Is there any by-product in<br>the process? If yes details<br>thereof.<br>The case stands deferred.	<br> <br> <br> <br> <br> <br> <br>
	<br>FCI OEN<br>CONNECTOR<br>S LIMITED<br>1010059108<br>dated<br>13.04.2015	01/81/050/00<br>154/AM16/<br>10/24/040/00<br>140/AM15/	The case was approved in M. No. 06/81 dated<br>26.06.2019 as per written comments given by<br>MeitY vide F. No.: 17(41)/2015-IPHW dated<br>25.06.2019. The applicant vide letter dated<br>27.02.2019 had requested for revision of<br>ratified norms. They vide letters dated<br>01.03.2019 and 09.04.2019 had reiterated the<br>same issue. The case was considered in M. No.<br>19/81<br>dt.<br>26.12.2019,<br>the<br>Committee<br>considered the report of study group and<br>decided to refer the matter to MeitY for<br>calculating the entitlement. The case was last<br>considered<br>in<br>meeting<br>no.<br>24/81<br>dt.<br>18.03.2020, the Committee considered the case<br>as per agenda and Consultant (TEC-3)<br>informed that the quantities of import items<br>mentioned by MeitY in its recommendation<br>vide<br>F.<br>No.<br>17(41)/2015-IPHW<br>dated<br>25.06.2019<br>are<br>not<br>matching<br>with<br>the<br>quantities as mentioned in the AA. Therefore,<br>the Committee decided to refer the case back to<br>MeitY for comments. As per decision of M.<br>No. 24/81 dt. 18.03.2020, the case was referred<br>to MeitY on 10.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per the agenda and<br>noted that MeitY via email<br>dated 25.08.2020 informed that<br>the case is under examination.<br>Therefore,<br>the<br>Committee<br>decided<br>to<br>wait<br>for<br>the<br>comments.	<br> <br> <br> <br> <br> <br> <br>Deferred
R24

	<br>FCI OEN<br>CONNECTOR<br>S LIMITED<br>1010058810<br>dated<br>26.09.2014	01/81/050/00<br>421/AM15/<br>10/24/040/00<br>058/AM15/	The case was approved in M. No. 6/81 dated<br>26.06.2019 as per written comments given by<br>MeitY vide F. No.: 17(40)/2015-IPHW dated<br>25.06.2019. The applicant vide letter dated<br>27.02.2019 had requested for revision of<br>ratified norms. They vide letters dated<br>01.03.2019 and 09.04.2019 had reiterated the<br>same issue. In M. No. 19/81 dt. 26.12.2019, the<br>Committee considered the report of study<br>groupand decided to refer the matter to MeitY	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per the agenda and<br>noted that MeitY via email<br>dated 25.08.2020 informed that<br>the case is under examination.<br>Therefore,<br>the<br>Committee<br>decided<br>to<br>wait<br>for<br>the<br>comments.	<br> <br> <br> <br> <br> <br> <br>Deferred
R25

69 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

R26

for calculating the entitlement. The case was last considered in meeting no. 24/81 dt. 18.03.2020, the Consultant (TEC-3) informed that MeitY recommended wastage for Copper Alloy but the import item “Copper Alloy” is not mentioned in the AA. Hence, the Committee decided to refer the case back to MeitY for comments on the issue. As per decision of M. No. 24/81 dt. 18.03.2020, the case was referred to MeitY on 10.08.2020. The case was rejected in M. No. 08/81dated The Committee considered the Approved 24.07.2019 on the ground that Zinc recovered case as per agenda and from the import items is not being exported. Consultant (TEC-3) informed The applicant vide letter dated 14.09.2019 that the applicant in its requested for fixation for ad-hoc norms and representation dated stated that while producing the finished goods 14.09.2019 & 17.02.2020 has the temperature is raised beyond 950ºC. They given chemical analysis report METAL 01/81/050/00 further stated that only zinc has the boiling of import & export item. CARE 417/AM19/ point below melting point of bronze. Hence, Hence, norms may be fixed for ALLOYS the burning loss is confined to very high the import items. Therefore, PRIVATE 03/95/040/00 quantum of zinc and little quantum of balance the Committee decided to fix LIMITED 461/AM19/ metals. Therefore, in the finished product, the the ad-hoc norms as per percentage of zinc content reduces. There is no written comments given by 0310822956 HQ E-office recovery of Zinc during the process. The case Consultant (TEC-3) as under: Dated Computer was considered in M. No. 21/81 dated 09.08.2018 No.: 23379 22.01.2020, the Committee noted that the case was not referred to Consultant (TEC-3) as per decision of M. No. 18/81 dated 11.12.2019. Therefore, the Committee decided to send the applicant‟s representation/ application to Consultant (TEC-3) immediately. As per NC decision, the case was referred to Consultant (TEC-3) on 17.03.2020.

(TEC-3)on 17.03.2020.

ITCHS<br>Code<br>Export Item<br>Quantity		Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74032290<br>Bronze Ingots Net Content :<br>1) Brass Scrap: 97,000.000<br>Kilogram 2)Tin Ingots:<br>3,000.000 Kilogram<br>100000<br>Kgs		1<br>2	74040022<br>80011090	Brass Scrap<br>Tin Ingots	101850 Kgs inclusive<br>of 2% wastage<br>3040 Kgs inclusive of<br>2% wastage
Note: The composition given in letter dated 17.02.2020	may be included in the description of export item.
RA concerned may take suitable consequential action accordingly.

70 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	<br>WELSPUN<br>CORP LTD.<br>3410044966<br>Dated<br>11.03.2019	01/81/050/01<br>167/AM19/<br>34/24/040/00<br>373/AM19/<br>HQ E-office<br>Computer<br>No.: 23765	<br>The case was ratified in M. No. 7/81 dated<br>10.07.2019 as per written comments dated<br>09.07.2019 given by Consultant (TEC-3). The<br>applicant vide letters dated 01.08.2019 &<br>27.09.2019 had requested for revision in<br>Norms. The case was referred to Consultant<br>(TEC-3) on 06.12.2019 for examination. The<br>case was last considered in M. No. 24/81dated<br>18.03.2020 and decided to remind Consultant<br>(TEC-3)<br>for<br>expediting<br>the<br>comments.<br>Reminder issued to consultant (TEC-3) on<br>25.05.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that<br>earlier<br>the<br>proposal<br>was<br>approved with 5% wastage for<br>import converting plates into<br>pipes.<br>The<br>applicant<br>has<br>informed that they want to<br>import slabs in place of plates<br>and<br>have<br>requested<br>for<br>additional<br>wastage<br>for<br>converting slabs into plates.<br>The committee noted that as<br>per the<br>Authorisation,<br>the<br>applicant is importing„Non-<br>alloy steel Slabs‟. Therefore,<br>the Committee decided to<br>revise the ad-hoc normson<br>repeat basisas approved for<br>AA No. 3410044590 dated<br>15.10.2018in M. No. 22/81<br>dated<br>19.02.2020<br>as<br>per<br>comments given by Consultant<br>(TEC-3) as under:<br>1. Quantity ofrelevantimport<br>item may be allowed with 12%<br>wastage.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R27

71 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	<br>GOLDSTONE<br>INFRATECH<br>LIMITED<br>0910066232<br>dated<br>15.05.2018	<br>GOLDSTONE<br>INFRATECH<br>LIMITED<br>0910066232<br>dated<br>15.05.2018	<br>01/81/050/00<br>433/AM19/<br>09/24/040/00<br>647/AM18/<br>HQ E-office<br>Computer<br>No.: 23384	The case was rejected in M. No. 8/81-<br>ALC2/2019 dated 24.07.2019 due to non-<br>submission of reply to Consultant (TEC-1)<br>deficiency<br>letter<br>dated<br>23.04.2019.<br>The<br>applicant<br>vide<br>letter<br>dated<br>19.11.2019<br>furnished reply and requested to fix the ad-hoc<br>norms. The case was last considered in M. No.<br>21/81 dated 22.01.2020, the Committee noted<br>that the case was not referred to Consultant<br>(TEC-1) as decided in M. No. 18/81 dated<br>11.12.2019. Therefore, the Committee decided<br>to<br>send<br>the<br>applicant‟s<br>representation/<br>application<br>to<br>Consultant<br>(TEC-1)<br>immediately. As per NC, the case was referred<br>to Consultant (TEC-1) on 13.02.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and Consultant (TEC-1) asked<br>physical file for examination of the case.<br>Therefore, the Committee decided to send<br>physical file to Consultant (TEC-1) for<br>examination & comments. Scanned copies of<br>complete set of applications along with all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order has been<br>sought from the applicant vide email dated<br>10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.<br>11.08.2020 was sent to Consultant (TEC-1) on<br>11.08.2020 & 25.08.2020.	The case was rejected in M. No. 8/81-<br>ALC2/2019 dated 24.07.2019 due to non-<br>submission of reply to Consultant (TEC-1)<br>deficiency<br>letter<br>dated<br>23.04.2019.<br>The<br>applicant<br>vide<br>letter<br>dated<br>19.11.2019<br>furnished reply and requested to fix the ad-hoc<br>norms. The case was last considered in M. No.<br>21/81 dated 22.01.2020, the Committee noted<br>that the case was not referred to Consultant<br>(TEC-1) as decided in M. No. 18/81 dated<br>11.12.2019. Therefore, the Committee decided<br>to<br>send<br>the<br>applicant‟s<br>representation/<br>application<br>to<br>Consultant<br>(TEC-1)<br>immediately. As per NC, the case was referred<br>to Consultant (TEC-1) on 13.02.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and Consultant (TEC-1) asked<br>physical file for examination of the case.<br>Therefore, the Committee decided to send<br>physical file to Consultant (TEC-1) for<br>examination & comments. Scanned copies of<br>complete set of applications along with all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order has been<br>sought from the applicant vide email dated<br>10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.<br>11.08.2020 was sent to Consultant (TEC-1) on<br>11.08.2020 & 25.08.2020.	The case was rejected in M. No. 8/81-<br>ALC2/2019 dated 24.07.2019 due to non-<br>submission of reply to Consultant (TEC-1)<br>deficiency<br>letter<br>dated<br>23.04.2019.<br>The<br>applicant<br>vide<br>letter<br>dated<br>19.11.2019<br>furnished reply and requested to fix the ad-hoc<br>norms. The case was last considered in M. No.<br>21/81 dated 22.01.2020, the Committee noted<br>that the case was not referred to Consultant<br>(TEC-1) as decided in M. No. 18/81 dated<br>11.12.2019. Therefore, the Committee decided<br>to<br>send<br>the<br>applicant‟s<br>representation/<br>application<br>to<br>Consultant<br>(TEC-1)<br>immediately. As per NC, the case was referred<br>to Consultant (TEC-1) on 13.02.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and Consultant (TEC-1) asked<br>physical file for examination of the case.<br>Therefore, the Committee decided to send<br>physical file to Consultant (TEC-1) for<br>examination & comments. Scanned copies of<br>complete set of applications along with all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order has been<br>sought from the applicant vide email dated<br>10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.<br>11.08.2020 was sent to Consultant (TEC-1) on<br>11.08.2020 & 25.08.2020.	The case was rejected in M. No. 8/81-<br>ALC2/2019 dated 24.07.2019 due to non-<br>submission of reply to Consultant (TEC-1)<br>deficiency<br>letter<br>dated<br>23.04.2019.<br>The<br>applicant<br>vide<br>letter<br>dated<br>19.11.2019<br>furnished reply and requested to fix the ad-hoc<br>norms. The case was last considered in M. No.<br>21/81 dated 22.01.2020, the Committee noted<br>that the case was not referred to Consultant<br>(TEC-1) as decided in M. No. 18/81 dated<br>11.12.2019. Therefore, the Committee decided<br>to<br>send<br>the<br>applicant‟s<br>representation/<br>application<br>to<br>Consultant<br>(TEC-1)<br>immediately. As per NC, the case was referred<br>to Consultant (TEC-1) on 13.02.2020. The case<br>was last considered in M. No. 24/81 dt.<br>18.03.2020 and Consultant (TEC-1) asked<br>physical file for examination of the case.<br>Therefore, the Committee decided to send<br>physical file to Consultant (TEC-1) for<br>examination & comments. Scanned copies of<br>complete set of applications along with all<br>concerned/related documents (reply to queries<br>raised etc.) in chronological order has been<br>sought from the applicant vide email dated<br>10.08.2020.<br>The<br>applicant‟s<br>reply<br>dt.<br>11.08.2020 was sent to Consultant (TEC-1) on<br>11.08.2020 & 25.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per the agenda and<br>decided tofix the ad-hoc<br>normsas per comments given<br>by Consultant (TEC-1) as<br>under:	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per the agenda and<br>decided tofix the ad-hoc<br>normsas per comments given<br>by Consultant (TEC-1) as<br>under:	<br> <br> <br> <br> <br>Approved
R28

									Recommen<br>ded<br>Quantity<br>5 %<br>wastage<br>with<br>accountabil<br>ity in<br>export<br>As per<br>GN-4
	ITCHS<br>Code	Export Item		Quantity	Sl.<br>No.	ITCHS<br>Code	Import Item		Recommen<br>ded<br>Quantity
	85469090	Silicone<br>Rubber<br>Insulators<br>33kV 10kN<br>Pinpolymer<br>Insulators		11967<br>Number	1	39100000	Elastosil R 401/40 S Silicones in<br>PrimaryForms		5 %<br>wastage<br>with<br>accountabil<br>ity in<br>export
					2	28183000	Aluminium Hydroxide
					3	39100000	Elastosil Aux Mould Release Agent<br>A Silicones in PrimaryForms
					4	32089019	Elastosil Aux G 3243 Primer<br>Silicones in Primary Forms
	85469090	Silicone<br>Rubber<br>Insulators<br>33kV 45kN<br>Suspension<br>Polymer<br>Insulators		14160<br>Number	5	73261990	10kN Ball (Rib) Metal Item		As per<br>GN-4
					6	73261990	10kN Socket (Rib) Metal Item
					7	73261990	45kN Ball (Rib) Metal Item
					8	73261990	45kN Socket (Rib) Metal Item
	RA concerned maytake suitable consequential action accordingly.
	<br>GOLDSTONE<br>INFRATECH<br>LIMITED		<br>01/81/050/00<br>506/AM18/	The case was rejected in M. No. 11/81-<br>ALC2/2018 dated 30.01.2019 due to non-<br>submission of replyto deficiencyletter dated				<br>The Committee considered the<br>case as per the agenda and<br>Consultant(TEC-1)informed		<br> <br> <br>Deferred
R29

72 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	0910065334<br>dated<br>08.08.2017	09/24/040/00<br>209/AM18/	04.10.2018. The applicant vide letter dated<br>19.11.2019 furnished reply and requested to fix<br>the ad-hoc norms. The case was considered in<br>M. No. 21/81dated 22.01.2020 and decided to<br>seek from the applicant to furnish the<br>following information as per advice of<br>Consultant (TEC-1): 1. Complete technical<br>information as per Appendix 4E.2. Net weight<br>of Silicone Rubber Compound in each of<br>export product. 3. Details of indigenous input<br>along<br>with<br>their<br>quality<br>required<br>to<br>manufacture Silicone Rubber Compound for<br>each export product. 4. Justification for 5%<br>wastage for import item No. 5 to 10. As per<br>NC decision, D/L was sent to the applicant on<br>05.03.2020. The case was last considered in<br>meeting no. 24/81 dt. 18.03.2020 and decided<br>to remind the applicant for furnishing the<br>requisite information. Applicant‟s reply dt.<br>11.08.2020 was sent to Consultant (TEC-1) on<br>11.08.2020.	<br>that the applicant in its reply	<br> <br> <br> <br> <br> <br> <br> <br>
				<br>dated 11.08.2020 has given
				<br>only name of indigenous inputs
				<br>without their corresponding
				<br>quantity.<br>Therefore,<br>the
				<br>Committee decided to seek
				<br>from the applicant to furnish
				<br>following information as per
				<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>advice of Consultant (TEC-1):<br>1. Indigenous inputs with<br>their quantity.<br>The case stands deferred.
	<br>JINDAL SAW<br>LIMITED<br>0510407878<br>dated<br>25.09.2018	<br>01/81/050/00<br>651/AM19/<br>05/23/040/00<br>271/AM19/	The case was ratified in M. No. 14/81-<br>ALC2/2019 dated 16.10.2019 as per written<br>comments<br>dated<br>11.10.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide<br>representation dated 07.01.2020 requested to<br>revise the ratified norms. As per decision of M.<br>No. 21/81 dated 22.01.2020 the representation<br>was forwarded to Consultant (TEC-3) on<br>22.01.2020. However, no comments have been<br>received yet. The case was last considered in<br>meeting<br>no.<br>24/81<br>dt.<br>18.03.2020<br>the<br>Consultant (TEC-3) asked for physical file for<br>examination of the case. Therefore, the<br>Committee decided to send physical file to<br>Consultant<br>(TEC-3)<br>for<br>examination<br>&<br>comments. As per decision, the complete<br>application was sent to Consultant (TEC-3) via<br>email dated 14.08.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda. Consultant<br>(TEC-3) asked for physical file<br>to examine the case. Therefore,<br>the Committee deicide to send<br>physical file to Consultant<br>(TEC-3) for examination of the<br>case.	<br> <br> <br> <br> <br> <br> <br>Deferred
R30

	JINDAL SAW<br>LIMITED	<br>01/81/050/00<br>653/AM19/<br>05/23/040/00	The case was ratified in M. No. 14/81-<br>ALC2/2019 dated 16.10.2019 as per written<br>comments<br>dated<br>15.10.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide<br>representation dated 07.01.2020 requested to	<br>The Committee considered the<br>case<br>as<br>per<br>the<br>agenda.<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
				<br>that<br>the<br>applicant<br>has
				<br>submitted its representation
				<br>dated<br>07.01.2020<br>against
R31			revise the ratified norms. As per decision of M.	<br>reduction in quantity of import
	0510408183<br>dated<br>23.10.2018	326/AM19/<br>HQ E-office<br>Computer<br>No.: 23769	No. 21/81 dated 22.01.2020 the representation<br>was forwarded to Consultant (TEC-3) on<br>22.01.2020. The case was last considered in	<br>item No. 4 & reduction of
				<br>wastage of item Nos. 5 & 6.
				<br> <br>The quantity of import item at
			meeting no. 24/81 dt. 18.03.2020 and decided	<br>Sl. No. 4 was calculated as per
			to wait for comments.	thickness<br>given<br>by<br>the
				applicant in their letter dated

73 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

				20.06.2019 and report of study	<br> <br> <br> <br> <br> <br> <br> <br> <br>
				group. Now the applicant has
				revised thickness of coating
				and also no justification has
				been provided for increasing
				allowed wastage for import
				items Nos. 5 & 6. Therefore,
				the Committee decided to
				maintainstatus quo.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.
	<br>JINDAL SAW<br>LIMITED<br>0510408874<br>Dated<br>11.12.2018	<br>01/81/050/00<br>701/AM19/<br>05/23/040/00<br>391/AM19/	The case was ratified in M. No. 5/81-<br>ALC2/2019 dated 12.06.2019 as per written<br>comments given by Consultant (TEC-3). The<br>applicant vide letter dated 14.01.2020 stated<br>that the quantity of welding consumables i.e.<br>Welding Wire, Welding Flux, X-Ray films and<br>CO2 wire are less permitted to them.<br>Therefore, they had requested to revise the ad-<br>hoc norms. As per decision of M. No. 21/81<br>dated 22.01.2020 the representation was<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>22.01.2020. The case was last considered in<br>meeting no. 24/81 dt. 18.03.2020 and decided<br>to remind Consultant (TEC-3) for expediting<br>the comments. A reminder issued to consultant	<br>The Committee considered the<br>case as per the agenda and	<br> <br> <br> <br> <br>Deferred
				<br> <br> <br>decided to seek from the
				<br>applicant to furnish following
				<br>information as per comments
				<br> <br>given by Consultant (TEC-3):
				<br>1. Detailed calculations
R32
				<br>supported with documents

				<br>for requirement of welding
				<br>consumables for connector
				<br>welding.
				<br> <br> <br>The case stands deferred.
			(TEC-3)on 25.05.2020 & 07.08.2020.
	<br>JINDAL SAW<br>LIMITED<br>0510411870<br>Dated<br>18.09.2019	<br>01/81/050/00<br>245/AM20/<br>05/23/040/00<br>236/AM20/	The case was considered in M. No. 18/81-<br>ALC2/2019 dated 11.12.2019 and decided to<br>allow description of import items & quantities<br>per SION C-593 as per written comments<br>dated 06.12.2019 given by Consultant (TEC-<br>3). The applicant vide letter dated 14.01.2020<br>stated that the quantity of welding consumables<br>i.e. Welding Wire, Welding Flux, X-Ray films<br>and CO2 wire are less permitted to them.<br>Therefore, they had requested to revise the ad-<br>hoc norms. As per decision of M. No. 21/81<br>dated 22.01.2020 the representation was<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>22.01.2020. The case was last considered in<br>meeting no. 24/81 dt. 18.03.2020 and decided<br>to remind Consultant (TEC-3) for expediting<br>the comments. A reminder was issued to	<br>The Committee considered the<br>case as per the agenda and	<br> <br> <br> <br> <br>Deferred
				<br> <br>decided to seek from the
				<br>applicant to furnish following
				information as per comments
				<br> <br>given by Consultant (TEC-3):
				<br> <br>1. Detailed calculations
				<br>supported with documents
				for requirement of welding
				<br>consumables for connector
R33				<br>welding.
				<br> <br> <br> <br> <br>The case stands deferred.
			consultant (TEC-3) on 25.05.2020.

74 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	ANKIT<br>FASTENERS<br>PVT. LTD.	01/81/050/00<br>922/AM19/<br>	The case was approved in M. No. 4/81-<br>ALC2/2019<br>dated<br>29.05.2019<br>on<br>the<br>recommendation of Consultant (TEC-3). The<br>applicant vide letter dated 09.07.2019 stated<br>that they had requested for RM of Dia. 6.33mm<br>and norms was fixed wrongly RM of Dia.<br>9.50mm and requested to correct the name of<br>RM as “Wire of SS Grade-A286 of dia<br>”	The Committee considered the<br>case<br>as<br>per<br>the<br>agenda.<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
				that the applicant has requested
				for change of diameter of
				import item from 9.5mm to
				<br>6.33mm and enhancement of
				<br> <br>wastage.<br>However,<br>for
				<br> <br>enhancement of wastage the
				<br> <br>details<br>submitted<br>by<br>the
				<br> <br>applicant didn‟t justify the
				<br> <br>higher wastage. Therefore, on
				<br> <br>the<br>recommendation<br>of
				<br> <br>Consultant<br>(TEC-3),<br>the
R34		07/24/040/00<br>	6.33mm. The applicant had also requested for<br>	<br> <br>Committee decided that the
	0710114286<br>dated<br>14.12.2018	225/AM19/<br>HQ E-office<br>Computer<br>No.: 23386	personal hearing to clarify the above point. As<br>per NC decision of M. No. 21/81 dated<br>22.01.2020 the case was referred to Consultant<br>(TEC-3) on 17.03.2020. The case was last<br>considered in meeting no. 24/81 dt. 18.03.2020<br>and decided to wait for comments. Reminder<br>issued to consultant (TEC-3) on 05.08.2020.<br>However, no comments have been received<br>yet.	<br> <br>description of import item may
				<br> <br> <br> <br> <br> <br>be read as under:<br>“Wire of SS Grade-A286 of<br>dia 6.33 mm”
				<br> <br>Note: The rest of the decision
				<br>for items remains unchanged
				as decided in M. No. 4/81-
				ALC2/2019 dated 29.05.2019.
				RA<br>concerned<br>may<br>take
				suitable consequential action
				accordingly.
	ANKIT<br>FASTENERS<br>PVT LTD.	01/81/050/00<br>923/AM19/<br>244	The case was approved in M. No. 4/81-<br>ALC2/2019<br>dated<br>29.05.2019<br>on<br>the<br>recommendation of Consultant (TEC-3). The<br>applicant vide letter dated 09.07.2019 stated<br>that they had requested for norms as per their<br>technical drawing only but it was fixed very<br>less. The applicant has also requested for<br>l hi lif h b i h	<br> <br>The Committee considered the<br>case<br>as<br>per<br>the<br>agenda.<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
				<br> <br>that the applicant has requested
				<br> <br>for enhancement of wastage.
				<br> <br>However, for enhancement of
				<br> <br>wastage the details submitted
				<br> <br>by the applicant didn‟t justify
R35		07//00/00<br>	persona earng to cary te aove pont. Te<br>	<br> <br>the higher wastage. Therefore,
	0710114287<br>Dated<br>14.12.2018	226/AM19/<br>HQ E-office<br>Computer<br>No.: 23387	applicant had also requested for personal<br>hearing to clarify the above point. As per NC<br>decision of M. No. 21/81 dated 22.01.2020 the<br>case was referred to Consultant (TEC-3) on<br>17.03.2020. The case was last considered in<br>meeting no. 24/81 dt. 18.03.2020 and decided<br>to wait for comments. A reminder was issued<br>to Consultant (TEC-3) on 05.08.2020.	<br> <br>on the recommendation of
				<br> <br>Consultant<br>(TEC-3),<br>the
				<br> <br>Committee decided to maintain
				<br> <br> <br> <br>status quo.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.
	<br>ANKIT<br>FASTENERS<br>PVT LTD.<br>0710113851	01/81/050/00<br>592/AM19/<br>07/24/040/00<br>151/AM19/	The case was approved in M. No. 4/81-<br>ALC2/2019<br>dated<br>29.05.2019<br>on<br>the<br>recommendation of Consultant (TEC-3). The<br>applicant vide letter dated 09.07.2019 stated<br>that they had requested for norms as per their<br>technical drawingonlybut it was fixed very	<br> <br>The Committee considered the<br>case<br>as<br>per<br>the<br>agenda.<br>Consultant (TEC-3) informed	<br> <br> <br> <br> <br> <br>Rejected
R36
				<br>that the applicant has requested

				<br>for enhancement of wastage.
				However,for enhancement of

75 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	dated<br>17.09.2018	HQ E-office<br>Computer<br>No.: 23391	less. The applicant had also requested for<br>personal hearing to clarify the above point. The	<br>wastage the details submitted	<br> <br> <br> <br> <br> <br> <br>
				<br>by the applicant didn‟t justify
			<br>case was last considered in M. No. 24/81 dt.	<br> <br> <br>the higher wastage. Therefore,
			18.03.2020 and decided to refer the case to<br>Consultant<br>(TEC-3)<br>for<br>examination<br>&<br>comments as decided in M. No. 21/81 dated<br>22.01.2020. As per decision of meeting no.<br>24/81 dt. 18.03.2020, the case was referred to<br>Consultant (TEC-3) on 05.11.2020.	<br>on the recommendation of
				<br>Consultant<br>(TEC-3),<br>the
				<br>Committee decided to maintain
				<br> <br>status quo.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.
	NATIONAL<br>STEEL AND<br>AGRO<br>INDUSTRIES<br>	01/81/050/00<br>251/AM17/	Initially, the case was rejected in M. No. 2/81-<br>ALC2/2017 dated 18.04.2017 due to non-<br>submission of reply to MoS deficiency letter<br>dated 20.10.2016. The case was considered in<br>M. No. 9/81 dated 25.07.2017 and decided to<br>ratify the norms for the above AA as per<br>written comments of MoS vide UO No.<br>2(10)/2016-TD<br>dated<br>05.07.2017.<br>The<br>applicant‟s representation dated 26.11.2018<br>against<br>above<br>NC<br>decision<br>was<br>again<br>considered in M. No. 11/81-ALC2/2019 dated<br>04.09.2019. The case was last considered in M.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind<br>the<br>applicant<br>for<br>furnishing<br>the<br>requisite<br>information.	<br> <br> <br>Deferred
R37	<br>LTD.		No. 24/81 dt. 18.03.2020 the Committee noted<br>that the applicant‟s representation has not yet<br>been referred to MoS for examination as<br>decided in M. No. 21/81 dated 22.01.2020.<br>Therefore, the Committee directed to forward<br>the<br>applicant‟s<br>representation<br>to<br>MoS<br>immediately. Scanned copies of complete set<br>of applications along with all concerned/related<br>documents (reply to queries raised etc.) in<br>chronological order has been sought from the<br>applicant<br>vide<br>email<br>dated<br>10.08.2020.<br>However, no reply has been received yet.
	5610004971<br>Dated<br>08.08.2016	56/24/040/00<br>027/AM17/
	<br>QUALITY<br>POWER<br>ELECTRICAL<br>EQUIPMENT<br>S PVT. LTD<br>3110065052<br>Dated<br>12.11.2014	<br>01/81/050/00<br>529/AM15/<br>31/83/040/00<br>165/AM15/<br>HQ E-office<br>Computer<br>No.: 23407	The case was rejected in M. No. 13/81-<br>ALC2/2015 dated 06.10.2015. NC noted that<br>firm has not replied to DHI D/L dated<br>03.07.2015 and reminder dated 21.08.2015.<br>Since no reply was received form firm despite<br>repeated reminders, the committee decided to<br>reject the case with direction to firm to pay<br>custom duty & applicable interest for EODC.<br>The applicant vide letter received in R&I on<br>03.07.2020 had requested for fixation of the<br>norms and stated that the applicant provide<br>information<br>to<br>joint<br>DGFT<br>Pune<br>on<br>28.10.2014. D/L dated 03.07.2015 had been<br>send but applicant has not replied till date. The<br>applicant has also not deposited the requisite<br>composition fee of Rs. 5000/-.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and noted<br>that no information has been<br>received yet from the applicant<br>regarding the deposition of<br>composition fee. Therefore, the<br>Committee decided toreject<br>the<br>applicant‟s<br>request<br>of<br>fixation of ad-hoc norms.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R38

76 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	<br>INJECTOPLA<br>ST PVT. LTD<br>0610038682<br>Dated<br>29.08.2017	01/81/050/00<br>363/AM18/<br>06/24/040/00<br>020/AM18/<br>HQ E-office<br>Computer<br>No.: 23408	The case was approved in M. No. 03/81-<br>ALC2/2018 dated 14.08.2018, NC decided to<br>ratify the norms for the above advance<br>authorization allowing the wastage of 5% with<br>the condition that RA should call for weight of<br>Phenolic Moulding Compound in the export<br>product and take necessary consequential<br>action accordingly. However, the applicant<br>vide letter dated 29.06.2020 requested for<br>review of ad-hoc norms stating that it is taking<br>AA for manufacturing resultant product "Brush<br>Box<br>Made<br>Out<br>of<br>Phenolic<br>Moulding<br>Compound" under 4.7 HBP and being granted<br>11.88 Grams raw material Phenolic Moulding<br>Compound for manufacturing to one piece<br>"Brush Box Made Out of Phenolic Moulding<br>Compound" on each and every Advance<br>Authorization. Hence applicant requested to<br>allow 11.88 Grams per piece. The applicant<br>has not deposited the requisite composition fee<br>of Rs. 5000/-.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and noted<br>that no information has been<br>received yet from the applicant<br>regarding the deposition of<br>composition fee. Therefore, the<br>Committee decided toreject<br>the<br>applicant‟s<br>request<br>of<br>revision of ad-hoc norms.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R39

	<br>CHHAPERIA<br>INTERNATIO<br>NAL<br>COMPANY<br>0710115072<br>Dated<br>19.06.2019	01/81/050/00<br>137/AM20/<br>07/24/040/00<br>066/AM20/<br>HQ E-office<br>Computer<br>No.: 23411	The case was approved in M. No. 17/81-<br>ALC2/2019 dated 27.11.2019 as per written<br>comments given by DPIIT vide U. O. No.: P-<br>47011/303/2019-TSW dated 13.11.2019. The<br>party vide letter dated 25.02.2020 has<br>requested for review of ad-hoc norms and<br>inform that the export item width has been<br>restricted to 300 mm but it depends on client<br>order and machine capacity, at the current<br>capacity and order situation. Hence, the<br>applicant has requested to allow width of<br>export item upto 360 mm and thickness of<br>export item to be same or less than the import<br>item thickness. The applicant has not deposited<br>the requisite composition fee of Rs. 5000/-.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and noted<br>that no information has been<br>received yet from the applicant<br>regarding the deposition of<br>composition fee. Therefore, the<br>Committee decided toreject<br>the<br>applicant‟s<br>request<br>of<br>revision of ad-hoc norms.<br>RA<br>concerned<br>may<br>take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R40

77 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

	<br>ANAND ARC<br>LTD.<br>0310819142<br>Dated<br>14.02.2018	<br>01/81/050/00<br>007/AM19/<br>03/94/040/00<br>914/AM18/<br>HQ E-office<br>Computer<br>No.: 23771	The case was approved in M. No. 21/81-<br>ALC2/2019 dated 22.01.2020 as per written<br>comments<br>of<br>Consultant<br>(TEC-3).<br>The<br>applicant vide letter dated 14.03.2020 had<br>requested<br>for<br>review of<br>ad-hoc<br>norms<br>informing that the product namely plain wire<br>rod 5.5 MM grade ER70S-6 have been fixed<br>@1.01 KGS. content in the export product in<br>the meeting no. 21/81 dated 22.01.2020 and the<br>same product in the same meeting in respect of<br>AA No. 0310822171 dated 06.07.2018 has<br>been fixed @5% wastage.	The case was approved in M. No. 21/81-<br>ALC2/2019 dated 22.01.2020 as per written<br>comments<br>of<br>Consultant<br>(TEC-3).<br>The<br>applicant vide letter dated 14.03.2020 had<br>requested<br>for<br>review of<br>ad-hoc<br>norms<br>informing that the product namely plain wire<br>rod 5.5 MM grade ER70S-6 have been fixed<br>@1.01 KGS. content in the export product in<br>the meeting no. 21/81 dated 22.01.2020 and the<br>same product in the same meeting in respect of<br>AA No. 0310822171 dated 06.07.2018 has<br>been fixed @5% wastage.	The case was approved in M. No. 21/81-<br>ALC2/2019 dated 22.01.2020 as per written<br>comments<br>of<br>Consultant<br>(TEC-3).<br>The<br>applicant vide letter dated 14.03.2020 had<br>requested<br>for<br>review of<br>ad-hoc<br>norms<br>informing that the product namely plain wire<br>rod 5.5 MM grade ER70S-6 have been fixed<br>@1.01 KGS. content in the export product in<br>the meeting no. 21/81 dated 22.01.2020 and the<br>same product in the same meeting in respect of<br>AA No. 0310822171 dated 06.07.2018 has<br>been fixed @5% wastage.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered the<br>case as per agenda and decided<br>torevise the ad-hoc normson<br>repeat basisas approved for<br>AA No.0310822171 dated<br>06.07.2018 in M. No. 21/81<br>dated<br>22.01.2020<br>as<br>per<br>comments given by Consultant<br>(TEC-3) as under:
R41


	ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	72292000	Wire of other Alloy<br>Silico Manganese Steel	1500 MT	72279090	Plain wire Rod 5.5mm<br>Grade ER70S-6	5%<br>wastage<br>with<br>accountabilityclause
	RA concerned maytake suitable consequential action accordingly.

The meeting ended with a vote of thanks to the Chair.

Shobhit Gupta Dy. Director General of Foreign Trade E-mail: nc2.dgft@nic.in shobhit.gupta@gov.in

78 | P a g e 7 8 Minutes of NC-II Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020

SDF

Export Items:	Export Items:	Export Items:
	1	Model number, technical specification and specific quantity-both in terms of number (if<br>any)and/or weight,of each exportproduct(Appendix-33 of current HBP refers).
	2	Detail technical note on manufacturing process includingthe relevant flowsheet.
	3	Detail technical drawings with dimension of each export product, Catalogue, if any, may<br>also be furnished.
	4	Weight of each Export Product.
	5	Weight of each of the imported and indigenous input, separately for each product, for the<br>purpose of material balancing. Net weight (Gross weight minus wastage) for each<br>imported and indigenous input in the export product may be indicated. Net weight along<br>with details of other imported input to be used in the resultant product and sought to be<br>imported/procured from sources other than the license,if any,mayalso be indicated.
Import Items:
	6	Information about the inputs required per unit of the resultant product as per Sl. No. 1 of<br>Appendix-11A appearingin current HBP(Vol.I)separatelyfor eachproduct.
Components:
	7	Technical characteristics /part numbers,if any.
	8	Assembly drawings/diagrams of the resultant product showing placement and exact use<br>of components in the exportproduct(s).
	9	Bifurcated quantities of components to be accounted for in the resultant product and the<br>requirement of components as spares. Raw Material / Consumables.
	10	Size and specification including grade, composition, range, thickness etc. of the items<br>proposed for import.
	11	Starting from the specification of the export product, basic calculation as to how of raw<br>material proposed for import has been arrived at, including the net weight of components<br>to be manufactured out of these imported materials, wastages claimed at each stage of<br>manufacturing<br>with<br>complete<br>justification<br>and<br>supported<br>by<br>documentary<br>evidence/drawings etc.
	11(a)	Sheet layout diagram of the material indicatingthewastage duringblanking.
	12	Cross Sectional Diagram of export product with calculation of raw material requirement<br>and the weight of the Cable in Kg. per Km. Copy of relevant National/International<br>Standard/buyer’s data sheet mayalso be furnished.
	13	Weight of Steel, which requires imported welding material, giving break-up of:<br>i)<br>Steel Plates/Sheets upto 30mm thickness<br>ii)<br>Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness<br>iii) Steel Plates/Sheets more than 70 mm thickness.<br>iv) Others e.g.Flanges,Pipes,Tubes,Bars/Rods, Castings/Forgings etc.
	14	Particulars of the licenses obtained in the past and ratified by ALC (with or without<br>modification) for the same export product covered under this application, in view of<br>PublicNoticeNo.48dated 14.11.2002.
	15	Use of exportproduct.
	16	You are advised to applyfor SION.
	17	Please use expanded/full name of endproduct.Do not use the abbreviations/short form.
	18	--
	19	Any other information:
	20	The information called for must be submittedin duplicate within 15 daysfrom the date<br>of issue of this letter. The information may be directly sent to Chairman, NC-II, O/o<br>DGFT,UdyogBhawan,New Delhi-110011,Office Telephone No.: 23061562,Extn.267.

	The following quantity of import may be allowed against export:	The following quantity of import may be allowed against export:	The following quantity of import may be allowed against export:	The following quantity of import may be allowed against export:
	SINo<br>Item of Export<br>Quantity<br>Item of Import<br>Quantity
	1<br>HOT<br>ROLLED<br>STEEL<br>21.78 MT<br>HOT ROLLED STEEL<br>21.89 MT<br><br><br>
	SHEET<br>(PICKLED	AND<br>SHEET<br>I	N<br>COILS<br>inclusive of 0.	5%
	OILED) , GRADE	0011,<br>(PICKLED	AND<br>wastage.
	THICKNESS<br>5.5	MM,<br>OILED)<br>	,<br>GRADE
	WIDTH<br>1220	MM,<br>0011,<br>T	HICKNESS
	LENGTH 2440 MM	5.5 MM, W	IDTH<br>1220
		MM, LENG	TH C MM
	2<br>HOT<br>ROLLED<br>	STEEL<br>495 MT<br>HOT ROLL	ED STEEL<br>497.5 MT
	SHEET<br>(PICKLED<br>AND<br>SHEET<br>IN<br>COILS<br>inclusive of 0.5%
	OILED),<br>GRADE<br>0011,<br>(PICKLED<br>AND<br>wastage
	THICKNESS<br>2.50<br>MM,<br>OILED),<br>GRADE
	WIDTH<br>1220<br>MM,<br>0011,<br>THICKNESS
	LENGTH 2440 MM<br>2.50 MM, WIDTH 1220
	MM, LENGTH C MM
	3<br>COLD<br>ROLLED<br>STEEL<br>297 MT<br>COLD<br>ROLLED<br>300 MT inclusive

	SHEET<br>IN<br>COILS,<br>STEEL<br>SHEET<br>IN<br>of 1% wastage
	GRADE<br>BHG1,<br>COILS, GRADE BHG 1,
	THICKNESS<br>0.5<br>MM,<br>THICKNESS<br>0.5<br>MM,
	WIDTH<br>24.90	MM,<br>WIDTH<br>	1000<br>MM,
	LENGTH C MM	LENGTH C	MM
	4<br>COLD<br>ROLLED<br>	STEEL<br>990 MT<br>COLD	ROLLED<br>1000 MT
	SHEET<br>IN<br>	COILS,<br>STEEL<br>S	HEET<br>IN<br>inclusive of 1	%
	GRADE<br>B50	D390,<br>COILS,	GRADE<br>wastage.
	THICKNESS<br>0.5	MM,<br>B50D390, T	HICKNESS
	WIDTH<br>220.5	MM<br>0.5 MM W	IDTH<br>1112
,<br>,<br>LENGTH C MM<br>MM, LENGTH C MM<br>(S.K. Bhatnager)<br>Technical Consultant-4<br>24.08.2020	,<br>,<br>LENGTH C MM<br>MM, LENGTH C MM

SI.No.	Weight	SI.No.	Weight
1	16811	19	552.9
2	3839.9	20	759.1
3	2502	21	984.2
4	9478	22	1390.8
5	11473	23	1837.3
6	6479	24	2305.7
7	391	25	12349
8	476	26	670.7
9	573.8	27	871.2
10	840.8	28	1328
11	1067.8	29	2206.9
12	1560	30	1102
13	1891.5	31	663.1
14	3415.3	`32`	479.8
15	5188	33	247
16	6643.4	34	159.6
17	7536.4	35	43.7	•
18	446	36	30.4

Government of India Director General of Foreign Trade

Case No 60

HQ File No: 01/81/050/00327/AM20

Advance Authorization No. 3110067607 dated 26.11.2019

M/s Thyssenkrupp Electrical Steel India Pvt Ltd, Nashik

The following quantity of items of imports may be considered by NC-II committee:

Sl<br>No	Item of export	Quantity	Item of import	Quantity
1	Cold Rolled Grain<br>Oriented (CRGO)<br>Silicon<br>Electrical<br>Steel Sheets/Coils	100 MT	Cold Rolled Full Hard<br>Silicon<br>Electrical<br>Steel<br>Coilof relevant grade.	<br>113.90 MT
			Magnesium Oxide (MgO)<br>Powder.	0.40 MT
			TitaniumOxide (TiO2)	0.027 MT
			Organic/Inorganic Coating<br>Chemicals	0.82 MT
			Liquefied Petroleum Gas<br>asFuel	20.32 MT
			Liquefied Petroleum Gas<br>asFeed	5.84 MT
			Vapour<br>Corrosion<br>Inhibitor<br>Paper<br>(VCI<br>Rusto paper Thickness:<br>0.201 mm)	0.175 MT

==> picture [86 x 29] intentionally omitted <==

(S.K. Bhatnager) TC(SKB) 21.08.2020

Shri Shobhit Gupta Dy DGFT NC-II

Government of India Director General of Foreign Trade

Case No 61

HQ File No: 01/81/050/00328/AM20

Advance Authorization No. 3110067608 dated 26.11.2019

M/s Thyssenkrupp Electrical Steel India Pvt Ltd, Nashik

The following quantity of items of imports may be considered by NC-II committee:

Sl<br>No	Item of export	Quantity	Item of import	Quantity
1	Cold Rolled Grain<br>Oriented (CRGO)<br>Silicon<br>Electrical<br>Steel Sheets/Coils	100 MT	Cold Rolled Magnesium<br>Oxide<br>(MgO)<br>Coated<br>and<br>Annealed<br>Silicon<br>Electrical Steel Coils of<br>relevant<br>grade<br>and<br>thickness.	109.55 MT
			Organic/Inorganic<br>Coating Chemicals.	0.82 MT
			Liquefied Petroleum Gas<br>(LPG)	3.37 MT
			Vapour<br>Corrosion<br>Inhibitor<br>Paper<br>(VCI<br>Rusto paper @180GSM)	0.175 MT

==> picture [86 x 30] intentionally omitted <==

(S.K. Bhatnager) TC(SKB) 21.08.2020

Shri Shobhit Gupta Dy DGFT NC-II

Government of India Director General of Foreign Trade

Case No 62

HQ File No: 01/81/050/00329/AM20

Advance Authorization No. 3110067609 dated 26.11.2019

M/s Thyssenkrupp Electrical Steel India Pvt Ltd, Nashik

The following quantity of items of imports may be considered by NC-II committee:

Sl<br>No	Item of export	Quantity	Item of import	Quantity
1	Cold Rolled Grain<br>Oriented (CRGO)<br>Silicon<br>Electrical<br>Steel Sheets/Coils	100 MT	Hot Rolled Annealed<br>and<br>Pickled<br>Silicon<br>Electrical Steel Coils of<br>relevant grade.	120.00 MT
			Rolling Mill Rolls	0.12MT
			Rolling Oil	0.045MT
			Magnesium Oxide (MgO)<br>Powder @ 8gm/m2 both<br>side.	0.40 MT
			TitaniumOxide (TiO2)	0.027 MT
			Organic/Inorganic Coating<br>Chemicals	0.82 MT
			Liquefied Petroleum Gas<br>asFuel	22.88 MT
			Liquefied Petroleum Gas<br>as Feed	6.38 MT
			Vapour<br>Corrosion<br>Inhibitor<br>Paper<br>(VCI<br>Rusto paper, Thickness:<br>0.201 mm)	0.175 MT

==> picture [86 x 29] intentionally omitted <==

(S.K. Bhatnager) TC(SKB) 21.08.2020

Shri Shobhit Gupta Dy DGFT NC-II

Advance Licence No. 0310835137 DTD. 02.03.2020

LIST OF EXPORT PRODUCTS:-

SR. NO.	H.S. CODE	DESCRIPTION OF EXPORT PRODUCTS	QTY in Km
1	85446030	RUBBER INSULATED WIRE / CABLES - 1.5 KVDC/SLR CABLE/1C X 4 SQMM-NL	500.000
2	74081190	COPPER CONDUCTOR - APC/35 SQ.MM/CIRCULAR COMPACTED COND.	80.000
3	74081190	COPPER CONDUCTOR - APC/95 SQ.MM/CIRCULAR COMPACTED COND.	15.450
4	85446020	INSULATED WIRE / CABLES - 1.8/3(3.6)KV/AL/XLPE/PVC/ASA/PVC/1CX400-	20.000
5	74081190	COPPER CONDUCTOR - ATC/2/0 AWG-67.42/STRANDED CIRCULAR COND	2.212
6	74081190	COPPER CONDUCTOR - ATC/4/0AWG-107.22/STRANDED CIRCULAR COND	18.300
7	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/2C X 10 SQ.MM	600.000
8	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/4C X 16 SQ.MM	100.000
9	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3CX50+55+25 SQ.MM-IM	200.000
10	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3 X 70+55+ 25 SQ.MM	200.000
11	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3 X 95+55+25 SQ.MM	100.000
12	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/4C X 35 + 25 SQ.MM	8.753
13	74081190	COPPER CONDUCTOR - APC/25 SQ.MM/CIRCULAR COMPACTED COND.	0.550
14	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/4C X 50 + 25 SQ.MM	25.711
15	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/SWA/PVC/4C X 95+50	0.200
16	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/SWA/PVC/4C X 120+70	0.200
17	74081190	COPPER CONDUCTOR - APC/50 SQ.MM/CIRCULAR COMPACTED COND.

		TOTAL	1,913.88

Advance Licence No. 0310835975 DTD. 26.04.2020

LIST OF EXPORT PRODUCTS:-

	nce Li<br>*OF EX*	cence No. 0310835975 DTD. 26.04.2020<br>*PORT PRODUCTS:-*	cence No. 0310835975 DTD. 26.04.2020<br>*PORT PRODUCTS:-*
SR.	NO.	H.S. CODE	DESCRIPTION OF E	XPORT PRODUCTS	QTY in Km
1		85446020	INSULATED WIRE / CABLES - 1.8/3(3.6)	KV/AL/XLPE/PVC/ASA/FR/1CX400	16.330
2		85446020	INSULATED WIRE / CABLES - 1.8/3(3.6)	KV/AL/XL/PVC/AWA/FR/1C X 240	74.500
3		85446020	INSULATED WIRE / CABLES - 19.9/34.5 KV/AL/XLPE/LSZH/1C X 150/16		20.365
4		85446020	INSULATED WIRE / CABLES - 19.9/34.5 KV/AL/XLPE/LSZH/1C X 185/16		29.664
5		85446020	INSULATED WIRE / CABLES - 19.9/34.5 KV/AL/XLPE/LSZH/1C X 400/16		102.372
6		85446020	INSULATED WIRE / CABLES - 19.9/34.5 KV/AL/XLPE/LSZH/1C X 630/16		3.374
7		85446020	INSULATED WIRE / CABLES - 35 KV/AAC/HMWPE/BHDTRPE/336.4 KCM-MVCC		14.402
8		85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/CTS/PVC/12C X 1.5		9.000
9
		85444920	INSULATED WIRE / CABLES - 0.6/1 KV/	U/PVC/PVC/CTS/PVC/20C X 1.5	0.550
1	0	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/PVC/CTS/PVC/4C X 1.5	5.500
1	1	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/PVC/CTS/PVC/4C X 2.5	9.000
1<br>	2<br>	85444920<br>	INSULATED WIRE / CABLES - 0.6/1 KV/C<br>	U/PVC/PVC/CTS/PVC/4C X 4<br>	3.000<br>
1	3	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/PVC/CTS/PVC/4CX6+2.5(E)	0.500
1	4	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/PVC/CTS/PVC/4CX16+6(E)	0.450
1	5	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/PVC/CTS/PVC/2CX2.5+2.5	2.000
1	6	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/CTS/PVC/2CX6+2.5		5.000
1	7	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/CTS/PVC/3CX6+2.5		0.700
1	8	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/PVC/CTS/PVC/3CX16+6		0.700
1	9	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/CTS/PVC/1C X 630		5.000
2	0	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/(AMT+D)/PVC/1PRX1.5		0.850
2	1	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/(AMT+D)/PVC/1TRX1		1.250
2	2	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/(AMT+D)/PVC/4PRX1.5<br>		4.300
23		85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/PVC/(AMT+D)/PVC/4TRX1		3.550
24		85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/CTS/PVC/2CX25+6		0.400
2	5	85444920	<br>INSULATED WIRE / CABLES - 0.6/1 KV/C	<br>U/PVC/XLPE/CTS/PVC/2CX50+16	0.200
2	6	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/XLPE/PVC/CTS/PVC/3CX25+6	0.800
2	7	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/XLPE/PVC/CTS/PVC/3CX35+10	0.900
2	8	85444920	INSULATED WIRE / CABLES - 06/1 KV/	U/XLPE/PVC/CTS/PVC/3CX70+25	0160
			.		.
2	9	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/XLPE/PVC/CTS/PVC/4CX25+6	0.120
3	0	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/A	B CABLE/3C X 50 + 54.6 SQ.MM	160.000
3	1	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/1C X 50 + 54.6 SQ.MM		300.000
3	2	85446020	INSULATED WIRE / CABLES - 12/20(24)KV/ALU/XLPE/CWS/LSZH/1CX150/16		9.000
3	3	85444920	INSULATED WIRE / CABLES - 0.6/1.0 KV/AB CABLE/4 C X 25 SQ.MM		0.380
3	4	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3CX70+1CX54.6+1CX16		35.055
3	5	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3CX35+1CX54.6+1CX16		9.787
3	6	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AB CABLE/3C X 150 + 70 SQ.MM		0.820
3	7	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/1C X 240 SQ.MM-FLEX		0.200
38	8	85444920	INSULATED WIRE / CABLES - 06/1 KV/CU/XLPE/PVC (RV-K)/2C X 15		3246
			. .		.
39		85446030	RUBBER INDULATED WIRE / CABLES - 1.8KVDC/ATC/HEPR/EVA/1CX4-NL		1,508.000
4	0	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/C	U/PVC/FRLS/1C X 6 SQ.MM	0.250
4	1	85444920	INSULATED WIRE - CABLES - 0.6/1 KV/C	U/PVC/FRLS/1C X 25 SQ.MM	2.000
4	2	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/A	LU/PVC/FRLS/1C X 185 SQ.MM	0.800
4	3	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/	NYCY/CU/PVC/PVC/CTS/FR/12CX2.5	0.500
4	4	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/	NYCY/CU/PVC/PVC/CTS/FR/19CX2.5	5.000
4	5	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/A	L/XLPE/PVC/SWA/FR/4C X 10 SQMM	15.000
4	6
		85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AL/XL/PVC/SSA/FR/4C X 120 SQ.MM		0.500
4	7	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/AL/XL/PVC/SSA/FR/4CX35/25 SQ.MM		4.500
4	8	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/NYCY/CU/PVC/PVC/CTS/FR/2CX2.5		0.500
4	9	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/NYCY/CU/PVC/PVC/CTS/FR/5CX2.5		1.500
5	0	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/NYCY/CU/PVC/PVC/CTS/FR/7CX2.5		0.500
5	1	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/SWA/FR-PVC/3C X 2.5		6.500
5	2	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/SWA/FR/4C X 4 SQ.MM		0.800
5	3	85444920	INSULATED WIRE / CABLES - 0.6/1 KV/CU/XLPE/PVC/SWA/FR-PVC/3C X 2.5		1.500

			TOTAL		2,381.27

==> picture [267 x 22] intentionally omitted <==

==> picture [176 x 68] intentionally omitted <==

==> picture [6 x 4] intentionally omitted <==

Sr.	Size & Description		Qty	Total
No.			(MTRS)	Cable wt
				(MT)
1	~pperConductor<br>PVC '"Iu'''''<br>Cu. Wlre Scnened<br>~u. Tapepve Sheathed UnarmouredCabl8Be1ow1000	with<br>V.
1.01	~ Core X 1.5 Sq MM		3000	0.883
1.02	17 Core X 1.5 Sq MM		14000	5.461
1.03	~2 Core X 1.5 Sq MM		4000	1.885
1.04	2 Core X 2.5 Sq MM		17380	4.661
1.05	~ Core X 4 Sq MM		1700	0.609
1.06	~ Core X 2.5 Sq MM		9000	2.723
1.07	~ Core X 4 Sq MM		3800	1.562
1.08	~ Core X 10 Sq MM		2650	1.885
1.09	~ Core X 2.5 Sq MM		8000	2.860
1.10	~ Core X4 Sq MM		1440	O.7G1
1.11	2Core X 35 Sq MM		1130	1.245
				-
1.12	3 Core X 25 Sq MM		2850	3.~~g.
1.13	~ Core X 35 Sq MM		1050	1.555
1.14	f3 Core X 50 Sq MM		1710	3.416
				~	d I
1.15	~ Core X 95 Sq MM		7060	26.4,tlt··

1.16	~ Core X 150 Sq MM			9590	55.963
1.17	~ Core X 50 Sq MM			1560	3.977
1.18	~ Core X 70 sq MM			970	3.396
1.19	~ Core X 95 Sq MM			1835	8.753
1.20	~ Core X 185 Sq MM			3110	28.043
1.21	~ Core X 1.5 Sq MM			8000	2.227
2	~opper Conductor PVC Insulated<br>Unannoured Cable Below 1000 V.		PVC Sheathed
2.01	2 Core X 6 Sq MM	.		800	0.287
2.02	~ Core X 16 Sq MM			3060	1.918
2.03	~ Core X 35 Sq MM			1010	0.934
2.04	2 Core X 25 Sq MM			790	0.572
2.05	3Core X 2.5 Sq MM			1806	0.300
3	Copper Conductor Covered withe••••<br>·MlcaTape XLPE<br>nsulatad ZHFR ;SheathedUnarmoul'8d<br>'Gable Below 1000 V.
3.01	3 Core X 2.5 Sq. MM			9960	3.517
3.02	3 Core X 4 Sq. MM			680	0.293
3.03	~ Core X 10 Sq. MM			12040	8.490
3.04	~ Core X 4 Sq. MM			500	0.223
3.05	~ Core X 2.5 Sq. MM			500	0.188
4	Copper Conductor Covered with GI_<br>MIca'rape XLPE<br>nsulaled CU. Wire Screened with Cu.".pe ZHFR Sheathed<br>Unarmoured Cable Below 1000 V.
4.01	12 Core X 120 Sq. MM			1010	3.508
4.02	~ Core X 150 Sq. MM			2500	9.819
4.03	~ Core X 185 Sq. MM			2420	12.389
4.04	~ Core X 240 Sq. MM			2940	19.246

	iCopper Condo Covered	with	Semi	C~Compound	C~Compound	C~Compound			XLPE
5	m.ulated<br>CU. Wire Screened		with	CU. Tape PVC Sheathed
	~narmOUred<br>Cable<br>6110 KV		{E}
5.01	~ Core X 240 MCM										780	6.685
6	~Iumlnlum<br>Conuctor<br>XLPE Insulated<br>Sheathed<br>Unarmoured<br>Cable Below				PVC, Nylon,<br>1000 V.			HOPE
6.01	4 Core X 25 Sq. MM										500	0.294
6.02	4 Core X 120 Sq. MM										500	1.094
7	Copper Conuctor<br>·XLPE Insulated<br>PVC, Nylon,<br>Sheathed<br>Unarmoured<br>Cable Below<br>1000 V.						HDPE
7.01	13 Core X 2.5 Sq. MM										1400	0.662
7.02	~1 Core X 2.5 Sq. MM										1400	0.577
7.03	~ Core X 2.5 Sq. MM										1400	0.474
7.04	~ Core X 2.5 Sq. MM										1700	0.466
7.05	~ COTeX 2.5 Sq. MM										3600	0.598
7.06	~ Core X 4 Sq. MM										1050	0.228
7.07	4 Core X 6 Sq. MM										625	0.269
8	Copper Col1ductor<br>PVC Insulated<br>~OOOY.			Unarmoured			eable		Below
8.01	1Core X 70 Sq MM										17000	11.508
9	~LPE Insulated<br>Aluminium<br>Pha ••<br>r.e ••• nger Condo Aerial<br>Bunched			Cond. <br>Cable		TWisted Without<br> Below<br>1000 V.
9.01	~ Core X 16 Sq. MM										140000	18.698
9.02	~ Core X 16 Sq. MM										6500	1.736
	XLPE Insulated<br>Aluminium		Condo	TWIsted ·Over A				Central		AI.
10	Alloy Insulated<br>M••••	nger Condo		Aerial		Bunched		Cable
	Below 1000 V.
10.01	~ C X 70 Sq. MM + 1 C	x 55 Sq. MM									51000	46;451
10.02	B C X 50 Sq. MM + 1 C	x 55 Sq. MM									73000	52.461
10.03	3 C X 35 Sq. MM + 1 C	x 55 Sq. MM									48000	28.148

10.04	3 C X 70 Sq. MM + 1 C x 55 Sq. MM	61500	59.632
11	Copper Conductor XLPE InaulatH,Z-NFR 'Sheathed<br>Unarmoured<br>Cable Below<br>1000 V.
11.01	as Core X 50 Sq. MM	500	0.911
11.02	~.5 Core X 95 Sq. MM	600	2.156
11.03	~.5 Core X 120 Sq. MM	800	3.634
11.04	~ Core X 70 Sq. MM	1500	1.233
11.05	~ Core X 4 Sq. MM	500	0.216
11.06	~ Core X 25 Sq. MM	1000	1.590
11.07	5 Core X 35 Sq. MM	1000	2.089
11.08	5 Core X 95 Sq. MM	500	2.620
11.09	5 Core X 185 Sq. MM	`SOO`	4.945
11.10	~ Core X 4 Sq. MM	2000	0.580
11.11	~ Core X 10 Sq. MM	`SOO`	0.241
11.12	3 Core X 2.5 Sq. MM	2500	0.667
11.13	3 Core X 4 Sq. MM	2800	0.939
11.14	3 Core X 6 Sq. MM	600	0.252
11.15	3 Core X 10 Sq. MM	1800	1.048
11.16	~ Core X 16 Sq. MM	2000	1.551
11.17	~ Core X 2.5 Sq. MM	2500	0.777
11.18	~ Core X 6 Sq. MM	1200	0.604
11.19	~ Core X 10 Sq. MM	800	0.568
11.20	~ Core X 16 Sq. MM	1500	1.439
11.21	~ Core X 4 Sq. MM	2200	0.638
11.22	~ Core X 35 Sq. MM	500	0.641
11.23	3 Core X 50 Sq. MM	1500	2.504
11.24	3 Core X 120 Sq. MM	1600	6.118·
	.
11.25	3 Core X 185 Sq. MM	800	4.660
11.26	4 Core X 25 Sq. MM	1500	1.901

1<br>1<br>1<br>1<br>1<br>1<br>1	1<br>1<br>1<br>1<br>1<br>1<br>1

		12<br>Copper Conductor<br>XLP<br>'<br>	E Insul.tedDFR:<br>Sheathed

		Annoured<br><lable Below<br>1000 V.
	1	2.01 3 Core X 4 Sq. MM<br>500<br>0.276
	1	2.02 ~ Core X 2.5 Sq. MM<br>500<br>0.294

		13<br>~opper<br>Conductor<br>PVC IRaulated<br>•••.••<br>1ShIelded<br>PVC<br>~heathed<br>Unannoured<br>Instrumentation<br>cable<br>Below 1000 V.
	1	3.01 ~ Pair X 1 Sq MM<br>SOO<br>0.232
	1	3.02 ~ Pair X 1 Sq MM<br>500<br>0.278

		14<br>~o..,per Conductor<br>XLPE Insulated'O¥eraliShelided<br>ZHFR<br>ISheathed Unannoured<br>InstI'umentatiOlt<br>cable<br>Below<br>1000 V.
	1	4.01 `7`Core X 1.5Sq.<br>MM<br>3000<br>0.983
	1	4.02 12 Core X 1.5 Sq. MM<br>1000<br>0.473
	1	4.03 4TX<br>0.7SSq.MM<br>1500<br>0.472

		~opper<br>Conductor<br>XLPE Inaulateet CU. Wi•• Screened<br>with<br>
		15<br>~u. Ta.,.·ZHFRSheathed<br>Unarmoured<br>lnatrumentalon<br>Cable
		I<br>1V
	~Ow<br>000.

1<br>1<br>1<br>1	1	5.01 ~ Core X 2.5 Sq. MM		2000	1.071
	1	5.02 ~ Core X4 Sq. MM		5000	2.562


		16<br>!Stranded Round<br>compacted<br>Tinned<br>Copper<br>Conductor
	1	6.01 120 SQ. MM<br>2500<br>2.672
	1	6.02 958Q.<br>MM<br>2000<br>2.138

==> picture [189 x 73] intentionally omitted <==

Government of India Director General of Foreign Trade

CASE No: R8

Subject: Ratification of norms in terms of Para 4.7 of HBP (Vol-I) of Advance Authorization (AA) No 5610004970 dated 18.08.2016 - M/s National Steel & Agro Industries Limited; Indore.

DGFT may refer to the UO Note No 01/81/50/300/AM-17/DES-II/32 dated 24.10.2019 whereby the requisite information received from M/s National Steel & Agro Industries Limited; Indore regarding amendment of export quantity of 331.481 MT of PPGI and 4016 MT of GPGC in place of 5000 MT of PPGI in the above mentioned Advance Authorization due to adverse market condition.

It may be noted that the export product GPGI is covered under SION C 473 of Handbook of Procedures Vol-II and PPGI PNo 33 (RE: 2012)/2009-2014 dated 30.11.2012. The quantity of inputs have been calculated as per Engineering Table given in HBP Vol-II and Tables in PN No 33 (RE: 2012)/2009-2014 dated 30.11.2012. The quantity of items of import to be allowed under the aforesaid AA for aforesaid amended export products has been calculated on per tonne of export product. The Excel sheets enclosed herewith for consideration of the NORMS Committee.

==> picture [78 x 26] intentionally omitted <==

(TC(SKB) 16.08.2020

Encl: as above

1. Shri Shobit Gupta Dy DGFT, NC-II

2. Shri Amit Kumar AD, NC-II

Sl.No	Advanced<br>Authorisa<br>tion No. &<br>Date	<br> <br>Descripti<br>on of<br>Item of<br>Export	Quantity of<br>Export MT	<br>Thickne<br>ss (MM)	Zinc<br>Coatin<br>g in<br>(gms/<br>m2)	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product
						Zinc (Kg)	Hot<br>Rolled<br>Alloy<br>Steel<br>Sheets/<br>Strips/<br>Wide<br>Coils of<br>relevent<br>grade<br>(Kg)	<br> <br>Rolling<br>Mill<br>Rolls<br>(Kg)	Rolling<br>Oil (Kg)	Picklin<br>g Oil<br>(Kg)	Steel<br>Strappi<br>ng (Kg)
1	56100049<br>70 dated<br>18.08.201<br>6	Cold<br>rolled<br>Galvanize<br>d<br>(Plan/corr<br>ugated)<br>Alloy<br>Steel<br>Sheetsof<br>relevent<br>grade<br>having<br>thickness<br>0.13 to<br>0.56 mm<br>and zinc<br>coating<br>60 -120<br>gms/m2.	4016.722
			124.640<br>	0.13	80	80.2	1,028.4	1.25	0.35	0.45	2.00
			248.706	0.14	60	53.0	1,058.7	1.25	0.35	0.45	2.00
			40.128	0.16	60	46.4	1,066.2	1.25	0.35	0.45	2.00
			2033.391	0.18	60	41.2	1,071.9	1.25	0.35	0.45	2.00
			52.006	0.18	70	57.8	1,053.4	1.25	0.35	0.45	2.00
			1083.220	0.18	80	57.8	1,053.4	1.25	0.35	0.45	2.00
			74.728<br>	0.26	60	26.4	1,088.4	1.25	0.35	0.45	2.00
			76.192	0.28	120	58.4	1,052.7	1.25	0.35	0.45	2.00
			138.605	0.36	60	19.5	1,096.2	1.25	0.35	0.45	2.00
			42.806	0.40	60	19.5	1,096.2	1.25	0.35	0.45	2.00
			102.300	0.56	90	23.0	1,092.3	1.25	0.35	0.45	2.00

Sl.No	Advanced<br>Authorisa<br>tion No. &<br>Date	<br> <br>Descripti<br>on of<br>Item of<br>Export	Quantity of<br>Export MT	<br>Thickne<br>ss (MM)	Zinc<br>Coatin<br>g in<br>(gms/<br>m2)	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product	Quantity of Input per ton of export product
						Hot<br>Rolled<br>Alloy<br>Steel<br>Sheets/<br>Strips/<br>Wide<br>Coils of<br>relevent<br>grade<br>(MT)	Zinc in<br>ingot<br>form<br>(Kg)	Rolling<br>Mill<br>Rolls<br>(Kg)	Rolling<br>Oil (Kg)	Picklin<br>g Oil<br>(Kg)	Steel<br>Strappi<br>ng (Kg)	<br>VCI<br>Rusto -<br>Paper<br>(Sq<br>Metre)	<br>Guard<br>Film<br>(Kg)	Appli<br>cator<br>Rolls<br>(Kg)	<br> <br>Paint<br>Primer<br>(litre)	Paint<br>Backe<br>r<br>(litre)	Paint<br>Top<br>Coat<br>(litre)
1	56100049<br>70 dated<br>18.08.201<br>6	Cold<br>Rolled<br>Galvanise<br>d Colour<br>Coated<br>Alloy<br>Steel<br>Sheets/<br>Hoops &<br>Strips/<br>Wide<br>Coils<br>(Plain/<br>Corrugate<br>d) having<br>coating<br>thickness<br>of Primer<br>4-10<br>Micron,<br>Backer 4-<br>14 Micron<br>~~and Top~~	331.4810<br>
			102.2980<br>	0.250	80	1019.057	55.30	1.25	0.35	0.45	2.00	5.00	23.15	0.13	13.220	15.935	28.329
			103.7090	0.340	60	1064.783	23.82	1.25	0.35	0.45	2.00	5.00	16.63	0.13	9.494	11.444	20.345
			100.2660	0.430	100	1062.435	31.04	1.25	0.35	0.45	2.00	5.00	12.97	0.13	7.407	8.928	15.872
			25.2080<br><br> <br>	1.200	80	1100.783	8.78	1.25	0.35	0.45	2.00	5.00	4.58	0.13	2.615	3.152	5.604

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.