DGFT Committee Minutes

W Mecting No.17/20 of thc Norms Committcc(NC― I)fOr thc liccnsing ycar 2019_2020 held On 18.12 2019 under thc Chairmanship of sho R. P. Goyal, Additional E)irector Genera1 0f Foreign Tl'ade to cOnsider the applicatiOns under Duty Excmption/RcmissiOn Schcmes(chaptcr_4)Of thc applicable Forcign Trade POlicy and thc Handb00k Of PrOccdures The fOHOwing Membcrs Of thc Comillittcc weК prescnt in the mccting:― Sl.No. Name of the representatives & tt ei.S"sign.rtio, Department δnri b.K.J aln,υ .o Sh五 K.S.SOdhちAsst.DirectOr DPIIT MSME ２ 　 一 ３ 　 一 ４ ISil Aumar,(l ccll-1リ Shri V.C. Agarwal, (Tech-3) Consultant C"rrrlt"rt - - 5 6. δnrl δ.k.bnatnagar 面 満 ¨ ¨ Consultant DGF′ I｀ 7. onrl rranav∪padhyay,Asslstant DirectOr(ISS) DGFT Note: l ln ccrtain cascs thc dccisiOn Of the Norllls cOllllllittcc rcfcrs tO the RccOmmcndatiOlly ll#[l:iillil菖F)野[11糞fi慮III(![11:111lili』1暑;11:i畦1111: 幾f
耐鞣 ヽ島i露Li蹴詰r認摘1∴胤乱酬 4 ForaH the Manualcases,the cOncerned RA shOuld chcck thc cOmpositiOn fces paid by the nrm ∫ :尾1厳T』:1∬淵 |::F工詭 r:lふ∵濯i;』i褥∬#:鵠思∬ポ尾 0謡 f潔席∬蹴Ⅷ庶 18。12.2019

V ⅣIEETING NUPIBER: Case No.: 8/9/80¨ALC2/2019 1 HQIrile 17/80-ALC2/2019 Pa●y Name:WONЛN AUTOPARTSINDIA PVT LTD RLA File PEIEETING DATE:1812.2019 Mcet No/Datc:17/80- ALC2/2019 1812.2019 Status: Lic No/Datci0410144145 13032013 Mcct No/Dttc:17/80- status: ALC2/2019 1 18.12.2019 1 Mcct No/Datc:17/80- status: ALC2/2019 18.12.2019 ‐ Lic.No/Date:61100o1290 Dcferrcd Approved :01/80/050/00133/AM20/ :04/24/040/00271/AM13/ Decision: The Committee considered the case as per agenda and clecided to ratily the rrorms as per written comments of MSME as under : Aluminium Pipe 17 MⅣI Width x l MⅣl Thickncss Note: l. Per unit weight of export item at Sl. No. I is 0.0587 Kg. 2. Per unit weight of export item at SI. No. 2 is 0.0602 Kg. 3. Per unit weight of export item at Sl. No. 3 is 0.0631 Kg. 4. Per unit weight of export item at SI. No. 4 is 0.0649 Kg. 5. Only Relevant grade of Aluminium pipe should be imported. RA concerned may take further necessary action as per the decision of NC.

Case No.:7/17/80-ALC2/2019 Party Nalllc:TERUMO

PENPOL LIMITED HQ File RLA File Lic.No/Date:53 l00 t 6701 Approved 2 :0118010s01002391A}/r20t :53r24t040t00001/AMt4 t 14.05.2013 Decision: Tlre committee considered the case as per the agenda and decided to ratify tlre rrorrns as per written comments of Consultant (Tech_l).(Copy "n"loseJ) RA concerned may take f,rther necessary action as per the decisio, of NC. ICase No.:345/15/80‐ ALC2/2018 HQ「ile Pa■y Namc:SARA SAE IPRIVATE LIMITED ‐RLA Filc CONN― HTR CORINLT LH VP8E2H 18B599 AC(Per unit weight=0.0587K 76082000 41321.70 Kg inclusivc Of O.10/。 wastage a■er 1/31d recovcry CONN¨ HTR COR OLET LH VP8E2H 18B598 AC(Per unit weight=0.0602 CONN― HTR COR INTL RH VP8E2H 18B599 BC(Per unit weight=0.0631 CONN―HTR COR OLET RH VP8E2H 18B598 BB(Per unit weight=0.0649 2 Ｌ 　 ｏ Ｓ Ｎ ITCHS Code Export Item ITCHS Code Import Item Recommended Norms 87089900 つ ４ 87089900 87089900 4 87089900

:01/80/050/00687/AM19/ :61/24/040/00008/AM16/ 01.06.2015 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 16.10.2019. However, no reply has been received yet. Therefore, the Committee decided to rernind the firrn for furnishing the requisite information within 15 days. Case is deferred. ICase No。:70/15/80¨ AI」C2/2018 HQ Filc Case No。:364/15/80- ALC2/2018 HQ Filc LIMITED RLA Filc Paty Namc:PROMAC ENGINEERING INDUSTRIES LIMITED RLA File 18122019 Lic.No/Date:0710108519 Dcfcrrcd Mcct No/Datc:17/80- Status: ALC2/2019
‐ 18122019 Lic No/Datci0710108812 Deferred Parfy Name: BHARAT Mcct No/Datc:17/80- Status: HEAVY ELECTRICALS ALC2/2019 :01/80/050/00412lAM19l :0ll24l040l00095lAMl6l 15.07.2015 Decision: The Committee considered the case as pertlie agenda and noted that a copy of application was sent to MeitY on 18.10.2019 for examination of the case. However, MeitY informed vide email ,dated 18.12.2019 that the copy of application is not received. Therefore, the Committee decided to send again a copy of application to MeitY for examination of the case. Case is deferred.

Case No.:363/15/80- Pa■y Name:PROMAC

AIJC2/2018 ENGINEERING HQ Filc INDUSTRIES LIMITED RLA File :01/80/050/007051AM191 :0712410401001841A}ll61 05.10.2015 Decision: The Commiflee considered the case as per the agenda and noted that seeking certain information as raised by DHI was sentto the firm on 18.11.2019. has been received yet. Therefore, the Committee decided to remind the firm requisite information within 15 days. Case is deferred. a deficiency letter However, no reply for furnishing the Meet No/Datei1 7/80- ALC2/2019 18.12.2019 Status: Lic No/Date:0710 108813 1Dcferrcd :01/80i050/00706lAMtgl :011241040100185/AM 16/ 0s. t 0.201 s Decision: The Comrnittee corrsidered rlre case as per the agenda and rroted tlrat a deficiency lefter seeking cerlain information as raised by DHI was sent to the finn on 1 8. I 1 .201 9. However, no reply has been received yet. Therefore, the Committee decided to remind the finn for fLrrnishing the requisite information within 15 days. Case is deferred. 3

ICase No。:11/15/80- lALC2/2018 ParサNamc:DYNAMATIC TECI―INOLOGIES LIMITED IRLA Filc Mect No/Datc:17/80- Status: ALC2/2019 18122019 Lic No/Datc:0710109710 Approvcd HQ File 101/80/050/00353/AM19/ :07/24/040/00004/AM17/ 26.042016 7 Decision: Tlre Committee considered the case as per the agerlda. The represerttative oi MSME informed that he has got information against the deficiency raised earlier and recommended the norms as per written comm-ents. The Cornmittee decided to ratify the norms as per written comments of MSME. (Copy enclosed) RA concerned may take fufiher necessary actiotl as per the decisiot-t of NC' Party Name:DYNAMATIC Mcct No/Datci1 7/80- Status: ITECHNOLOGIES LIMITED ALC2/2019 1 1 18122019 RLA File Lic.No/Datc:0710109871 1Approved :07/24/040/00038/AM17/ 2605.2016 8 necision, ih. Co--itt". considered the case as per the agenda. The representative of MSME i,formed that he has got information against the deficiency raised earlier and recommended the norms as per written comm-ents. The Committee decided to ratifi, the norms as per written comments of MSME. (Copy enclosed) RA concerned rnay take fufther necessary actiotl as per the decision of NC. ICase No.:12/1/80-ALC2/2019 Paty Name:INTERPUⅣIP Mcet No/Datc:17/80- Status: : IHYDRAULICSINDIA PVT.ALC2/2019 1 1 1LTD. 18.122019 HQ Filc RLA File l′ iC No/Datc:0410162268 Defcrred i01/80/050/007601AM 19/ :04/24/040/00093/AM17/ 09092016 9 Decision: Thc Comlllittec considercd thc casc as pcr thc agcnda alld notcd that a dcflcicncy lcttcr sccking ccrtain illformation as raiscd by MSME、 vas sent to thc ■rm on 16.102019. Ho、vcvCr, nOI reply has been reccived yet.Thercforc,the(3omlllittec dccidcd to rclllind thc flrm for fllrnishing thc ‐ rcquisite information、vithin 15 days. | ICase is deferred

Case No.:24/15/80¨

AI」C2/2018 1HQ Filc 1 101/80/050/00366/AM19/ Paty Nalne:DYNAMATIC Mcct No/Date:17/80- Status: TECHNOLOGIES LIMITED ALC2/2019 18122019 HQ File RLA File Lic No/Datc:0710H0861 1Approvcd 10‐ :01/80/050/007287/AⅣl19/ :07/24/040/00292/AM17/ 28.122016 1 1Decision: The Colllinittee considcred the case as per the agcnda Thc rcprcsentative of ⅣISME l infOrmcd that he has got information against the dcflciency raiscd earlicr and rccolllinCndcd thc norills l as pcr written comments.Thc Committce dccided to ratitt thC nOrms as pcr writtcn coml■ cnts of lPISⅣIE.(Copy enclosed) ICase No.:386/15/80- IALC2/2018

RA concemed may take further llecessary action as per the decision of NC. :01/80/050/007 44lAll419l :2412410401000341AM171 14.03.2017 Decision: The Committee considered the case as per the agerrda and decided to ask from tlie firm to furnish the following information as per advice of Consultant (Tech- I ) : L Complete Certificate of Analysis (CoA) for entire quantity of irnport indicating Antimony content & Gold content. 2. Percentage wastage claimed on the basis of Antimony content in imporl. Case is deferred. (〕ase No.:402/15/80- AI」(〕2/2018 HQ Filc Case No。:398/15/80- ALC2/2018 HQ File HQ Filc :01/80/050/00148/AM18/ Palty Nalllc:SHIV HYDROMET RLA File Mcct No/Datc:17/80- Status: ALC2/2019 1812.2019 Lic.No/Datc:2410042158 Dcfcrred ParサNamc:DYNAMATIC Mcet No/Date:17/80¨ TECIINOLOGIES LIMITED ALC2/2019 18.12.2019 Status: Lic.No/Date:07 I 0 I I 1 555 Approved :01/80/050/00740lAli4lgl :0112410401003951AMl71 08.0s.2017 l2 Decision: The Cornrninee considered the case as per the agenda. The representative of MSME informed that he has got information against the deficiency raised earlier and recommended the norms as per written comments. The Cornmittee decided to ratifu the norms as per written comments of MSME. (Copy enclosed) RA concerned may take furtlier necessary action as per the decision of NC. RLA File ParけNamc:VEレI Mcet No/Date:17/80- status: TECHNOLOGIES PVT LTD.ALC2/2019 ‐ 118.122019 1 IRLA File Lic.No/Datc:0910065039 1Approved 15.05.2017 1

Case No.:11/19/80¨

AIノC2/2017 HQ Filc ,, :01/80/0501002921A}l4181 :091241040100054iAM18/

Case No.:4/8/80-ALC2/2017 Party Name:THEINDU旺

PVT LTD Decision: The Cornmittee considered the, case as per the agerrda. The represerrtative of MSME recommended the norms on repeat basi$s approved for AA No. 0910054874 dated 3f.01.2013 (copy enclosed). Therefore, the Cornmitted decided to ratify the norr.r-rs as recornmended by MSME. RA concerned may take further necessary action as per the decision of NC. 14 RLA File :05/24/040/00005/Aλ /118/ Mect No/Date:17/80- status: ALC2/2019 ‐ 18.12.2019 1 Lic.No/Date:0510402573 Defered 16.05.2017 . 5

Decision: The Cornmittee considered the case as per the agenda and noted that the firm,s reply was sent to DHI on 13.12.2019 for examination of the case. However, no corlments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred.

Case No.:1/11/80-ALC2/2018 Palty Nallle:DIAⅣ

10ND METAL SCREENS(P)LTD ‐ IHQ Filc lRLA Filc ‐ |:01/80/050/00192/AM19/ :65/24/040/00003/AM18/ ‐151)ecision: Thc c01■lllittCC cOnsidcrcd thc case as pcr thc informcd that thc flrm's reply is inappropriatc ThcrcfOrc,thc ‐ thc nrill to furnish the f01lowing infOrillation: I To prOvidc licensc amcndment sheet. Casc is dcfcrred.

Case No.:132/15/80…

ALC2/2018 HQ Filc i01/80/050/004741NM 19/ Mcet No/Date:17/80- ALC2/2019 18122019 Lic.No/Date:6510000003 1705.2017 agcnda and rcprcsentativc Collllllittec dccided tO ask Status: Deferrcd of MSⅣIE agaHl from ParサName:DYNAMATIC Mcet No/Date:17/80- status: TECHNOLOGIES LIMITED ALC2/2019 18.12.2019 脱漏浙0側鍛Ⅶν 蹴器αm Ha8柳ЮК d 16 Decision: The Comrnittee considered the case as per the agenda. The representative of MSME informed that he has got information against the deficiency raised earlier and rlcommended the norms 3:^p_"I_y,_tten comments. The Committee decided to ratifli the nonns as per written comments of MSME. (Copy enclosed) RA concerned may take further necessary actior-r as per the decision of NC.

Case No.:400/15/80…

ALC2/2018 ICase No.:80/11/80- 181ALC2/2018 Pa“y Namc:MACAWBER BEEKAY PVT.LTD. Mect No/Date:17/80- .status: ALC2/2019 1812.2019 Party Name:DYNAMATIC ‐Mcet No/Date:17/80- TECHNOLOGIES LIMITED ALC2/2019 18.122019 Status: HQ tte RLA Ⅲc仏 剛7 ぶ 需 よ面 “ 山機 Ⅲ 品 “ 101/80/050/00742/Aヽ/119/ lo7/24/040/00394 17 5Lciζ 16五:TIё 6品1li■8e3。ntiared tiさcisc as per thc agenda.The represcntati↓c6f MsMЁ illfOrmcd that he has got infOrmation against thc dcflciency raiscd carlicr and rccOl■ linCndcd thc nOrms as pcr wHtcn comments.Thc COmmittcc decided tO ratitt thC nOrms as per writcn cOmmcnts Of ⅣISPIE。(COpy cnc10sed) RA conccrncd may take flllther ncccssary aCtiOn as per thc dccisiOn OfNC.

HQ Filc RLA Filc Lic.No/Datc:0510403845 1Defcrrcd :01/80/050/0021llAM19l :051241040100230/AMl8/ 29.08.2011 Decision: The Committee cousidered the case as per the agenda and noted that a deficiency letter seeking ce(ain information as raised by MSME was sent to the firm on 11-12.2019. However, no reply has been received yet. Hence, the Committee decided to wait for tlre firm's reply. Case is deferred. ICase No。:18/19/80¨ AIノC2/2017 HQ Filc

Case No.:36/19/80-

ALC2/2017 INDIA PVT LTD RLA File Palty Name:BIRLA PRECISION 18122019 Lic NO/Datc:1710006668 Dcferrcd Status: Mcct No/Date:17/80¨ status: Mcet No/Datc:17/80- lstatus: ALC2/2019 1 Paty Namc:KINECO MeetNo/Date:17180- Status: KAMAN COMPOSITES― ALC2/2019 . ^ :0 li 80/05 0100299lAMl8l :171241040t00050/AM l8 I t0.10.201i I9 Decision: The Committee considered the case as per the agenda and the representative of DpIIT informed that the case is under examination and they need some information. The Cornmittee asked DPIIT to inform the deficiencies which may be sent to the firm. Case is deferred. Pary Name:ASHOKA Mcet No/Date:17/80- MANUFACTURING LTD. ALC2/2019 18.12.2019 HQ File IRLA Filc Lic No/Date:0210207941 1Dcfercd 101/80/050/00317/AM18/ :02/24/040/00120/AM18/ 03112017 201btiζ 16轟:十五 8ё3轟1litiきち 6五 ζ iaちrさa the`五ζもis per thc agcnda and notcd tiat a denci3nし,1さtt8: scekillg ccrtain infbrmation as raised by PIsPIE was sent to the flrm On 16 10.2019 fO110wcd by a rc■lindcr on 10.12.2019.HOwcver,■o rcply has bccn received yet. Hellce,thc(30111nlittce dccidcd tO wait for thc flrill's rcply. Casc is defcrred.

Case No.:26/20/80-

ALC2/2017 ParサNameiICEM ENGINEERING COMPANY ALC2/2019 PRIVATE LIMITED 18.12.2019 HQ F‖ e RLA Filc Lic.No/Date:0310817800 Dcferred :01/80/050/00390/AM18/ :03/94/040/00742/AM18/ 15 122017 刻b∝ふm缶3ё6品品■お品れたd品ぬさ 霊群瀧∬訛 どlrrtttiftti温.器 電 i露:∫71亀盤 1器° :1lal;1り:読ち .1:潔v∝,no Кメ y htt hcn К∝市 ed y∝ HcКQ■c lComnlittec dccidcd tO wait for the flrm's reply. ‐ Casc is defcrrcd. 22f霊胤″ 20月) V

HQ Filc 18.122019 Lic No/Date:0310818218 Deferrcd :01/80i050/00384/AMl8l :031941040100782iAM18/ 04.01.2018 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 18.11.2019. However, r.ro reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the requisite information within 15 days. Case is deferred. TECHNOLOGIES LTD. RLA Filc :01/80/050/00387/AM I 8/ :031941040100784iAM I 8/ 04.01 .201 8 23 Decision: The Committee considered the case as per the agerrda and noted that a deficiency letter seeking ceftain information as raised by MSME was sent to the firm on 18.11.2019. However, no reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the requisite inforrnatiorr within 15 days. Case is deferred.

Case No.:23/20/80¨

ALC2/2017 1HQ File

Case No.:21/20/80¨

AIメ32/2017 HQ Filc (〕ase No.:22/20/80- AIりC2/2017 1HQ Filc Paty Namc:BIRLA PRECISION ITECHNOLOGIES LTD ‐RLA Filc Palty Name:BIRLA PMCISION TECHNOLOGIES LTD. RLA Filc Patty Namc:BIRLA PRECISION ITECHNOLOGIES LTD. IRLA File Mcct No/Datc:17/80¨ Status: ALC2/2019 18.12.2019 Lic No/Date:0310818219 Dcfcrrcd Mect No/Date:17/80- Status: ALC2/2019 18.12.2019 Lic No/Datci03 10818275 Dcfcrrcd Mcct No/Datc:17/80- Status: ALC2/2019 18.12.2019 ‐ Lic No/Dtte:0310818273‐ Dcferred :01/80/050/00385/AM 18/ :031941040100785/AM 1 8/ 05.01 .201 8 24 Decision: The Committee corrsidered the case as per the agenda and noted thar a deficiency letter seeking certain information as raised by MSME, was sent to the firm on 18.11.2019. However, no reply lras been received yet. Therefore, the Comrnittee decided to remind the firm for furnishing the requisite information within l5 days. Case is deferred. :01i80/050/00386/AM I 8/ :031941040100783/AM 1 8/ 0s.01 .201 8 ')< LJ Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firrn on 18.11.2019. However, no reply has been received yet. Therefore, the Committee decided to rernind the firm for furnishing the requisite information within 15 days. V 8

^- :01i80/050/00468/AM19/ :561241040100036/AM18/ 08.01.2018 2b Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 11.12.201 9 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ‐ Casc is dcfcrred. ICase No.:126/15/80- Paty Namci SHAKTI .ALC2/2018 PUMPS(INDIA)LTD. Mect No/Date:17/80- ALC2/2019 18122019 Status: Lic No/Dtte:5610005299 Dcfcrrcd Mcct No/Datci1 7/80- Status: ALC2/2019
‐ 1812.2019 1 Lic No/Datc:5610005319 1Dcfcrrcd HQ File IHQ File IRLA File

Case No.:8/17/80-ALC2/2019 Party Nallle:SHAKTI

PUMPS(INDIA)lンTD. IHQ File RLA File ^- :01/80/0s0t002401A}L{201 :561241040100038/AMl8i 15.01.2018 l/ Decision: The Committee considered the case as per the agenda and noted was sent to DPIIT on 13.12.2019 for examination of the case. However, received yet. Hence, the Committee decided to wait for the cornments. Case is deferred. that a copy of application no cornlnents have been

Case No.:2011180-ALC2l20l9 Pafi Name: ZTT INDIA

Meet No/Date:17180- Status: PRIVATE LIMITED RLA Filc ALC2/2019 1 18.122019 ‐ Lic No/Date:0410163956 Dcfcrred ,, :01/80/0501007681AM191 :0412410401002121AM181 07.02.2018 Decision: The Committee considered the case as per the agenda and noted that MeitY has sought certain information frorn the firm vide letter dated 16.12.2019. Therefore, the Committee decided to wait for the reply/comments. Case is deferred.

Case No.:392115180- Party Narne: DYNAMATIC Meet Noi Date:17180- Status:

' :l^f,cztzotS ITECHNOLOGIES LIMITED ALC2/2019 18122019 Lic No/Date:0710112968 Approvcd :07/24/040/00336/AⅣl18/ 13.03.2018 Decision: The Committee considered the case as per the agenda. The representative of MSME informed that he has got information against the deficiency raised earlier and recommended the norms as per written comments. The Committee decided to ratify the norms as per written comments of MSME. (Copy enclosed) HQ Filc :01/80/050/00734/AM19/ RLA Filc 29 9

RA concerned may take further necessary actiorr as per the decision of NC. Case No。:393/15/80- ALC2/2018 HQ File Pa“y NamciSARTORIUS Mcct No/Datc:1ウ /86: STEDIM INDIA PVT LTD ALC2/2019 18.12.2019 Status: RLA File Lic.No/Date:0710H3010‐ Defcrred 23.032018 Status: 30 :01/80/050/00735/AM19/ 1:07/24/040/00348/AM18/ Decision: The Cornmittee considered the case as per the agenda and decided to ask fiorn the firm to furnish the following information as per advice of iepresentative of MSME : I . Process flow chaft with wastage justification for raw materials. Case is deferred. 31 ‐Case No.:118/15/80- Pa“ y Name:LMT TOoLS Mcct No/Datc:17/80_ ALC2/2018 1NDIA PRIVATE LIMITED ALC2/2019 18.12.2019 HQ Πtt RLA Πb
Ⅵl% :::∬ 鰍 管 α3H60`ウbお 161お ↓Cd :01/80/050/00460/AM19/ 131/83/040/00001/Ar Decision:Thc COmmitcc cOnsidcrcd the case as per agcnda and decidcd tO rad取 thC norms as pcr written c0111ments of COnsuitant(Tech_3)as undcr: Note: The firm should import relevant gd" "f .tl ,"b^ RA concerned may take further necessary action as per the decision of NC.

Case No.:10/1/80-ALC2/2019 Pa■y Namc:MAGNA

AUTOMoTIvEINDIA PRIVATE LIMITED Mcet No/Datc:17/80- status: ALC2/2019 1 18122019 ‐ 32 HQ File RLA File Lic.No/Date:04t0t64172 Deferred :01/80/050/00758/AMl9t :04r24t040t000o1tAMtgt 06.04.2018 Decision: The cornmittee considered the case as per the agenda aud uoted that a copy of application was sent to MSME for examination of the case on 06.08.2019 followed by an I.D. reminder on 1'7'10'2019' However, no comments have been received yet. Hence, the Committee decided to wait for the comments. ,Case is deferred. 33 Case No.:6/8i80- ALC2l20l8 pafiy Name: L & T_MHpS ITCHS Code Export Item ITCHS Code Import Item Recommended Norms 82077010 Gear Cutting Tools of Cobalt bearing High Speed Steel (Gear Hobs) 72281090 High Speed Steel having Cobalt Content more than l0o%

• Make Bohler, Model- MC 90 Microclean or equivalent 15000]くg inclusive of 500/。 wastage with 150/。 recovery 10 Mect No/Date:17/80- status:

HQ Filc :01/80/050/00129lAM19l :0319510401011121AM181 27 .04.2018 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the finn on 16.10.2019 followed by a reminder on 10.12.2019. However, the firm vide email datecl 18.12.2019 informed that the requiiite information as asked by NC is under preparation and will be subrniffed it within 7 days. Therefore, the Comrnittee decided to wait for the firm's reply. Case is deferred. TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED RLA Filc 18122019 Lic.No/Datc:0310820724 Dcfcrred Mcct No/Date:17/80- ALC2/2019 Status: INDUSTRIES LIMITED 18.12.2019 HQ File RLA Filc Lic.No/Datc:07101 :01/80/050/007391A}d191 :0712410401003571AM18t 14.05.2018 34 Decision: The Committee considered the case as per the agenda and noted tlrat seeking certain information as raised by DHI was sent to the finn on 18.11.2019. has been received yet. Therefore, the Committee decided to remind the firm requisite information within 15 days. 'Case is deferred. ICase No.:397/15/80- IALC2/2018

Case No.:128/15/80-

ALC2/2018

Case No.:129/15/80¨

IALC2/2018 HQ Filc ParサName:PROMAC ENGINEERING 13276 Deferred a deficiency letter However, no reply for fumishing the Status: Status: ParサNamc:DYNAMATIC Mcct No/Date:17/80- TECHNOLOGIES LIMITED ALC2/2019 18.12.2019 HQ File RLA File Lic.No/Date:07101 13340 Approved :01/80/050i004701AM191 :071241040100034/AM19t 28.05.2018 35 Decision: The Committee considered the case as per the agenda. The representative of MSME informed that he has got information against the deficiency raised earlier and recommended the norms as per written comments. The Committee decided to ratify the norms as per written comments of MSME. (Copy enclosed) RA coucerned rnay take further necessary action as per the decision of NC. Party Name:DYNAMATIC Mcct No/Datc:17/80- ITECHNOLOGIES LIMITED ALC2/2019 1812.2019 Lic No/Date:0710113346 Approved 36 :01/80/050/00471/AⅣl19/ 107/24/040/00033/AM19/ 2805.2018 Decision: The Committee considered the case as per the agenda. The representative of MSME informed that he has got information against the deficiency raised earlier and recommended the norms as per written comments. The Committee decided to ratif,, the norms as per written comments of MSME. (Copy enclosed) RLA Filc

‐ RA conccrllcd may take fulthcr ncccssary aCtion as pcrthc dccision ofNC ICase No.:130/15/80- Party Namc:DYNAMATIC Mcct No/Datc:17/80- Status: ‐ IALC2/2018
‐TECHNOLOGIES LIMITED ALC2/2019 18122019 HQ Filc RLA Filc Lic.No/Date:0710113344 Approvcd :01/80/050/00472/AM19/ :07/24/040/00040/AM19/ 28.05.2018 37 becisi。五:十五8ё。 ““ 1■cc conζ idered the taζ c as pcr thc agenda Thc rcpresentative of MSME linfOrmed that hc has got information against thc dcncicncy raised carlicr and recommcndcd the norms l as per written commcnts.The Committee decidcd to ratitt the norms as per writtcn comments of l ⅣISPIE。(Copy enclosed) RA conccrned may takc fllrthcr ncccssary aCtion as pcr thc decision ofNC. Case No。:131/15/80- Party Nalllc:DYNAMATIC Mcet No/Datc:17/80- Status: ALC2/2018 TECHNOLOGIES LIMITED ALC2/2019 1 18122019 ‐ ‐ IHQ File lRLA Filc Lic.No/Date:0710113347 1Approvcd 101/80/050/00473/AM19/ 107/24/040/00032/AM19/ 28.05.2018 38 betisibil iAё も島mi18e 86Asiaered thc casc aζ pさi thc agCnda Thも represcntat市c oF MSME ‐ informcd that hc has got infOrmation against thc dcflciency raiscd carlier and rccommendcd thc norms as pcr writtcn commcnts.Thc Committcc dccidcd to ratitt thC nOrms as pcr writtcn comments of lⅣISⅣIE。(Copy Cnclosed) I RA conccrncd may takc fll“ hcr necessary acuon as pcrthc dccision OfNC. ICase No.:166/15/80- Pa“y Name:BHARAT ⅣIcct No/Date:17/80- Status: I ALC2/2018 ‐HEAVY ELECTRICALS ALC2/2019 1 LIMITED 18.12.2019 HQ File RLA Filc Lic No/Datc:0910066472 Dctrrcd 39:01/80/050/0019,今)119/ 19?211940490171/AM19/ 18.072018 ‐ 1)ecision: Thc Comlllittcc considercd thc casc as pcr the agcnda and notcd that a dciciency lctter . scckillg certain inforination as raiscd by E)HI、 vas sent to the ttrm On 10.12.2019.Howcvcr,nO rcplyl has been rcccived yet.Hcncc,the Committee dccidcd to wait for the flrm's reply. | iCase ls dcfcrred. ‐Case No.:7/11/80- Party Namc:HIMACHAL Mcct No/Datc:17/80- Status: ‐ ALC2/2018 FUTURISTIC ALC2/2019 1COMMUNICAT10NS LTD.1812.2019 40 HQ File RLA Filc Lic.No/Datc:0510407445 1Deferrcd :01/80/050/00267/AM19/ :05/23/040/00215/AM19/ 06.08.2018 Decision: Thc Comlnittcc considercd thc case as pcr the agcnda and nOted that the irlll's rcply、vas sent to McitY for cxalllination ofthc case on 15 07 2019 fo1lowcd by an II)renlindcr on 14 11.2019 12

However, MeitY vide email dated 1 8.12.2019 informed that the case is under exatnination. Hetlce, the Committee decided to wait for the comments. Case is deferred. Party Name: ICEM Mcet No/Datc:17/80- Status: ENGINEERING COMPANY IALC2/2019 PRIVATE LIMITED
‐18.12.2019 IHQ File lRLA File Lic No/Date:0310822939 Dcferred i01/80/050/00210/AM19/ :03/94/040/00306/AM19/ 09082018 41 becisibil The ё6mttittcc considさlcd thc casc tts pcr the agcnda and noted that a dcflcicncy letter seeking certain information as raiscd by Consultant(Tech… 3)was sCnt tO the flrm on 16 10 2019 foHo、vcd by a rc■lindcr on 10.12.2019. Ho、vcvCr, nO rcply has becn rcccivcd yct. Hcncc, thc Comillittcc dccidcd to wait for thc flrm's reply. ‐ Case ls defcrrcd. ICase No.:19/11/80- IALC2/2018 42 Decisio.r: 'fhe Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 06.08.2019 for examination of the case. However, the representative of DHI informed in meeting that the case is under examination. Therefore, the Committee decided to remind DHI for expediting the comments. Case is deferred. Case No。:179/15/80- ALC2/2018 HQ Filc :01/80/050/005211ヽM19/ HQ Filc :01/80/050/00782/AM19/ ICase No.:25/11/80¨ IALC2/2018 1HQ File 101/80/050/00216/A卜/119/ RLA Filc :17/24/040/00017/AⅣl19/ Paty Namc:LARSEN& TOUBRO LIMITED RLA File :03/95/040/00056/AM19/ Mcet No/Date:17/80- Status: ALC2/2019 18.122019 1 Lic.No/Date:1710006716 Defcrred 20.082018 Mcct No/Datc:17/80- IStatus: ALC2/2019 1 18.12.2019 1 Lic.No/Date:0310823360 Dcferrcd 2808.2018 ParけName:PROMAC ENGINEERING INDUSTRIES LIMITED RLA File Lic.No/Datc:0710H37 1 0 1Defcrrcd :07/24/040/00102/AM19/ 1308.2018 1 Status:

Case No.:34/1/80¨ALC2/2019 Party Name:KINECO Mcct No/Datc:17/80-

IKAMAN COMPOSITES― ALC2/2019 1NDIA PVT LTD 18 12 2019 43 Decision: The Committee considered the case as per the agenda and the representative of DPIIT informed that the case is under examination and they need some information. The Committee asked DPIIT to inform the deficiencies which may be sent to the firm. Case is deferred. 144 ２ ０ V

I〕ecision: The Comlllittcc considered the casc as pcr the agcnda and notcd that thc flrl■ 's reply was scnt to Consultant(Tech-3)on 18]2 2019 br cxainination oftlle casc However,no comments havc bccn rcceived yet Hcncc,the(3omlllittec decided to wait fbr thc collllllents Casc is dcfcrred l ‐Case No.:23/11/80¨ Party Name:JAYESH Meet No/Date:17/80- Status: : .ALC2/2018 METALS AND FERRO ALC2/2019 1 ALLOYS LLP 18 12 2019 HQ Filc RLA Filc Lic No/Datci0310823416 Deferred 45:01/80/050/09714/AM19/ :,3/91/049/00418/AM19/ 29082018 Decision: Thc(3olllinittCc considcred thc casc as per thc agenda and noted that the rcprcscntativc of PIISⅣIE has infOrmcd that the sizcs of illlpolt gじcxport itellls arc ovcrlapping and llorms cannot be approvcd in this case.Thcrcforc,the Col■ mittcc decidcd lo ask fl・om thc■rm to cla面取thc Sallle. ‐ ICase ls defcrrcd. ‐ ICase No.:28/11/80- ParりName:L&T―MHPS Mcet No/Date:17/80- Status: ALC2/2018 TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED 18.122019 HQ File RLA Filc Lic No/Datc:0310823400‐ Defcrrcd 46:01480/059/99719/AM19/ :9,49,/040/00466/AM19/ 29.082018 Decision: Thc Comlnittec considered thc casc as pcr thc agenda and l10tcd that thc flrlll's rcply was lscnt to DIII on 22.10.2019 for exanlination of the case. Ho、 vever, no comlllents have bcen receivcd lyct Thereforc,the(3omlllittce decided to remind DHI for expcditing thc cOmmcnts. Case is defcrrcd . Case No.:65/11/80- Pat/Name:PLANSEEINDIA Mcet No/Datc:17/80- status: ALC2/2018 HIGH PERFORMANCE ALC2/2019 MATEMALS PVT LTD 18 12.2019 1HQ File RLA File Lic.No/Datc:0710‖ 3822 Defcrrcd 47191イ194959/9,7,,今ヽ 419197?14940/00094/AM19/ 06.09.2018 Decision:Tllc ComΠ littcc cOnsidcrcd thc casc as pcr thc agenda and l10tcd that the■rlll's rcply sent to Consuhant(Tech_3)on 31.102019.Howevcr,no comments havc bccn rcccivcd sOね r.Thercfore,thc Committcc decidcd to wait fOr commcnts. Casc ls defcrrcd.

Case No.:9/1/80-ALC2/2019 Palty Name:L&T―

ⅣIHPS Mcct No/Datc:17/80- status: . TURBINE GENERATORS ALC2/2019 ‐ PRIVATE LIMITED 18.122019 48責 。「 ilも RLA Filc l′ ic.No/Datc:0310823645 Dcfcrrcd i01/80/050/00757/AM19/ :03/95/040/00469/AM19/ o7092018 14 プ

Decision: The Cornmittee considered the case as per the agerrda and noted that the firm,s reply was sent to DHI on 22.10.2019 for examination of the case. However, no comffrents have been reCeived yet. Therefore, the Committee decided to remind DHI for expediting the comments. Case is deferred.

Case No.:200/15/80¨ Pany Nalllc:DYNAMATIC Mcct No/Datc:17/80-

AIJC2/2018 TECHNOLOGIES LIMITED ALC2/2019 18.122019 IHQ File lRLA Filc Lic.No/Datc:0710113846.Approvcd l 101/80/050/00542/AM19/ .:o7/24/040/00137/AM19/ 14.092018 49 58ti`i6五:十11e ё6轟ふi品さ86As拍さ rcd ihe 8asさ五 spさr the agさida.TAさ repたζ eitttive 6F MSME informcd that hc has got informatiOn against thc deflciency raised carlicr and rccOlllinCndCd thc nOrms l laS pCr written comments The COmmittcc dccidcd tO rttitt the nOrms as pcr writtcn coml■ cnts Of l VIISⅣIE。(COpy encloscd) .RA cOnccrncd may takc ftllthcrllcccsSary actiOn as pcr thc dccisiOn OfNC Status: Status: Status:

Case No.:201/15/80-

ALC2/2018 Party Nallle:DYNAMATIC ⅣIcct No/Date:17/80- ITECHNOLOGIES LIMITED ALC2/2019 18122019 RLA File Lic No/Datc:0710113852 1Dcferred :07/24/040/00155/AM19/ 17092018 1 50 Decision: The committee considered the case as per the agenda and noted that a deficie,cy letter seeking certain information as raised by MSME was sent to the firm on 1g.11.2019. However, no reply has been received yet. Therefore, the committee decided to remind the firm fbr furnishing the requisite information within l5 davs. Case is deferred. HQ File :01/80/050/00543/AM19/

Case No.:57/11/80-

AI」C2/2018 HQ File

Case No.:82/11/80‐

ALC2/2018 ParサName:GL&V INDIA Mect No/Date:17/80- PRIVATE LIMITED ALC2/2019 18.122019 RLA File Lic.No/Date:3110o67179 158fcrrga 26.09.2018 1 :01/80/050/00248/AM19/ :31/83/040/Ooo96/AM19/ Decision: The committee considered the case as per the agenda and noted that a deficiency lefter seeking certain information as raised by MSME was sent to the firm on 1g.11.201g. However, no reply has been received yet' Therefore, the committee decided to remind the firm for f-,rnishi,g the requisite information within l5 days. Case is deferred. Parfy Name: ANSTECH Mcet No/Date:17/80- ALC22019 18.122019 つ ４ ξ υ 15 Status:

Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Vadodara& the firm and in this regard a letter was sent to RA, Vadodara and the firm on 08.07.2019 followed by reminderc o,i zs.oq.zolg & 18.10.2019. However, no information has been received so far. Therefore, the Committee decided to remind again RA, Vadodara& the applicant for submitting the complete set of application. ,Case is deferred- HQ Filc :01/80/050/00273/AM19/

Case No.:247/15/80‐

AIノC2/2018 HQ「ilC :01/80/050/00589/´ ゝM19/

Case No.:249/15/80‐

ALC2/2018 1HQ Filc RLA Filc lLic.No/Datc:3410044543 Dcferrcd :34/24/040/00218/AM19/ o4.10.2018 Party Name:AZAD Mect No/Date:17/80- status: ENGINEEⅢNG PRIVATE ALC2/2019 1 LIMITED 18.12.2019 RLA File Lic No/Datc:0910066802 Defcrred :09/24/040/00324/AM19/ o2.11.2018 ParサNamc:AZAD Mcct No/Datc:17/80- status: ENGINEERING PRIVATE ALC2/2019 LIMITED 18.12.2019 RLA Filc Lic No/Datc:0910066804 1Defcrrcd 02112018 :O1/80/050/00591/AM19/ lo9/24/040/00329/AR/119/ 53 Decision: The Committee cortsidered the :11e as per the agerrda and noted that a deficiency letter seeking ceftain information as raised by DHI was sent to the firm on 16.10.2019 followed by a reminderon 10.12.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm's reply. Case is deferred. 54 Decision: The Committee considered the case seeking ceftain infonnation as raised by DHI renrinder on 10. 12.2019. However, no reply has Case is deferred. as per the agenda and noted that a deficiency letter was sent to the firm on 16.10.2019 followed by a been received yet. Hence, the Committee decided to Pa■y Name:BHARAT Mcet No/Datc:17/80- status: HEAVY ELECTRICALS ALC2/2019 LIMITED 18 12 2019

Case No.:253/15/80¨

AIノC2/2018 HQ File RLA Filc :01/80/050/00595/AM19/ 109/24/040/Oo340/AM19/ Lic No/Datc:091oo66870 Defcrred 16.112018 1 55 Decision: The committee considered the :L: ut per rhe agenda and noted thar a deficiency lefler seeking ceftain informatio-n as raised by DHI wai sent to"the firm on 16.10.201g fbllowed by a reminder on 10'12'2019' However, no reply has been r"".ir"Jl"t. Hence, the committee decided to wait forthe firm,s reply. ---- ----,-"" -/ Case is deferred. 16

.56 Decision, flre Co**itte" "oriiaered the case as per the agenda and noted that a deficiency letter rseeking certain information as raised by MSME was sent to the firrn on 18.11.2019. However, no reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the reqr"risite information within l5 days. Case is deferred.

Case No.:17/1/80¨ALC2/2019‐ Pa“y Namei MUDHRA FINE McctNo/Datc:17/80- status:

Case No.:259/15/80-

ノヽ I」C2/2018 1HQ File 101/80/050/00601/AM19/ HQ Filc Case No。:274/15/80… ALC2/2018 HQ File

Case No.:275/15/80…

ALC2/2018 HQ Filc Palty Namc:DYNAMATIC TECHNOLOGIES LIMITED IRLA File 107/24/040/00182/AM19/ BLANC PRIVATE LTD RLA File ParサNamc:STERLITE TECHNOLOGIES LTD RLA Filc Party Nal■ci STERLITE TECHNOLOGIES LTD. RLA Filc Mcet No/Date:17/80- Status: ALC2/2019 18122019 Lic.No/Date:0710H4156‐ Deferred 22.11.2018 ‐ ALC2/2019
‐ 18122019 Lic No/Date:0410164995‐ Deferrcd Mcet No/Date:17/80- IStatus: ALC2/2019 18.12.2019 Lic No/Date:0310825720 Dcferred Mect No/Date:17/80- status: ALC2/2019 1 18122019 ‐ Lic No/Datc:03 10825721 1Dcfcrred 18122018 1 ,, :0118010501007651AM191 :0412410401002071AM19t 17.12.2018 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 18.10.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MSME for expediting the comments. Case is defemed. ,, :01/80/0s01006161AM191 :03t95t040t00812tAM19r 18.12.2018 Decision: The Comminee considered the case as per the agenda arrd noted that Meity vide letter dated 16.12.2019 has sought certain irrfonnation frorn the firm. Therefore, the Committee decided to wait for the reply/comments. Case is deferred. :01/80/050/00617/AM19/ .:o3/95/040/00815//AM19/ 59 Decision: The Cornmittee considered the case as per the agerrda and noted that the firm's reply was sent to MeitY for examination of the case on 03.06.2019 followed by a D.o. reminder on 07. 1l .2019. !o1ever, no comments have been received yet. Tlierefore, the Cornmittee decided to remind Meity lor Ute cotnments. Case is deferred. 17

ICase No。:279/15/80- ,ALC2/2018 ‐ HQ Filc

Case No.:293/15/80-

ALC2/2018 ‐ HQ Fi10

Case No.:298/15/80¨

AI」C2/2018 .HQ Filc :01/80/050/00640/AM19/ IPatty Name:SUPER CIRCLE IMcct No/Dttc:17/80- AUTO LIMITED ALC2/2019 18122019 Status: RLA Filc :01/80i050/006211AM191 :05t24t040t0o506tAMlgt Decision: The Committee considered tlre case as per the that the firm's reply of deficiency letter dated 30.05.2019 66 Committee decided to ask again from the firm to furnish Consultant (Tech-1): Lic.No/Date:05 I 0409020 Deferred 20.12.2018 ageuda aud Consultant (Tech-l) inlorrned is not specific & deficient. Therefore, The the following information as per advice of 18.12.2019 1 Lic No/Date:0310826313 Defcrred 10012019 Status: Mcct No/Datc:17/80- status: ALC2/2019 18.12.2019 Lic.No/Date:31100672881E)efcrred 1601.2019 1

1. Detailed manufacturing process (Not flow sheet) indicating wastage at each stage of manufacturing.
2. Specific import itern in each category.
3. Specific import item at Sl. No. l3 with quantity & its end use. Case is deferred. Party Name: STERLITE Mcct No/Date:17/80- lstatus: POⅥ/ER TRANSNIIISSION ALC2/2019 U, :01/80/0501006351AM191 :03t95t040t008,6gtAMtgt Decision: The Comrnittee considered the case as per the agenda and noted that Meity vide letter dated 05.12.2019 has sought certain information from the firm. Therefore, the Committee decided to wait for the reply/comments. Case is deferred.

Case No.:21/1/80-ALC2/2019 Pa●y Namc:MUDHRA FINE McctNo/Datci1 7/80-

BLANC PRIVATE LTD AIフC2/2019 18.12.2019 HQ File RLA File Lic.No/Date:0410165082 1Dcferrcd l101.2019 :01/80/050/00769/AM19/ 1o4/24/040/00222/AM19/ 62 Decision: Tlte Colnminee considered the case as per the agenda and noled that the copy of application was sent to MSME for examination of the case on 29.05.2019 followed by I.D. reminders on 08.07.2019, 1"7.10.2019 & 11.12.2019. However, no cornments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. 一 　 一 LIMITED RLA Filc Palty Nalllc:ULTRA ENGINEERS IRLA Filc :31/83/040/00164/AM19/ ∠ Ｕ 18 V

Decision: The Committee considered the case as per the agenda and noted that a copy of applicatiorr was sent to DHI on 16.07.2019 followed by an ID reminder on 17.09.2019, for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind again DHI for expediting the comments. Case is deferred.

Case No.:23l1/80-ALC2l20l9 Parfy Name: PARKER

Meet No/Date:l7180- Status: HANNIFIN INDIA PVT. ALC2I2O19 LTD. 18.12.2019 HQ File RLA File t,ic.No/Date:04101 65142 Deferred :01/80/050/0077llAM19l :041241040100223tAM19t 28.01.2019 . , Decision: The Commiflee considered the case as per the agenda and decided to ask lrom the firm to 64 fu.nish the following information as per advice of representative of MSME :

1. Process flow charl with step-wise wastage & wastage jLrstification. The Cornmittee also decided to refer the case to Consultant (Tech-1) for the items under his dornain. Case is deferred.

Case No.:2511/80-ALC2/2019 Party Narne: MUDHRA FINE Meer No/Date: lTtBO- Status:

BLANC PRIVATE LTD ALC2I2O19 18.12.2019 HQ File RLA File Lic.NoiDate:O410l 65210 Deferred :01/80/0501007131Al/,191 :041241040100241tAM19t 13.02.2019 65 Decision: Tlte Comrnittee considered the case as per llre agenda and noted that a copy oIapplication was sent to MSME for examination of the case on 11.01.2019 followed by an I.D. reminder on 11.09.2019. However, no comments have been received yet. Therefore, the Cornmittee decided to remind again MSME for expediting the comments. Case is deferred.

Case No.:330/15/80- Party Name: AUTO COMP Meet No/Dat e:17180- Status:

ALCZI?OI9 INDIA PVT. LTD ALC2I2O19 18.12.2019 HQ File RLA File Lic.No/Date:3110061323 Approved :01/80/050/006721AM191 :31183t040t00113tAM19r 19.02.2019 Decision: The Cornmittee considered the case as per agenda and decided to ratifz the norms as per 66 *.itt",l comments of MSME as under : ITCHS Code Export Item ITCHS Code Import Item Recommended Norms 84836090 Hub-Impeller / Coupling Made from Carbon Steel 73043939 Alloy Non Alloy Steel Seamless Tube ( Carbon Content 117.606 MT inclusive of 33.60% wastage after affecting 20Yo recov erv 19

Seamless Tube) Carbon Content upto 0.60 upto0.60) Carbon content up to 0.60 from scrap Note: The firm should import relevant grade of steel only. RA concerned may take further necessary action as per the decision of NC. ,Case No.:26/1/80-ALC2/2019 Party Namc:MUDHRA FINE McctNo/Date:17/80- Status: ‐ IBLANC PRIVATE LTD ALC2/2019 18.12.2019 HQ File RLA Filc Lic.No/Datc:0410165228 Dcfcrred :01/80/050/00774/AM19/ :04/24/040/00242/AM19/ 19.022019 67 Decision: The Cornrnittee considered the case as per the agertda artd noted tlrat a copy of applicatiorr was sent to MSME for examination of the case on 10.07.2019 followed by an I.D. reminder on 17.09.2019. However, no comments have been received yet. Therefore, the Committee decided to remind MSME for expediting the comments. Case is deferred.

Case No.:29 tll80-

Party Name: AUTO TECH Meet No/Date:17180- Status: ALC2/2019 INDUSTRIESINDlA PVT ALC2/2019 LTD IHQ File ‐RLA Filc 18.122019 Lic No/Datc:0410165239 1Approved ０ ０ ‘ υ :01/80/050/00777/AM19/ :04/24/040/00257/AM19/ 21.02.2019 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments of MSME as under : Note:

1. Per unit weight of export item is 776 Gram.
2. Per unit weight of import item is 1847 Gram'
3. 'fhe firm should import relevant item only. RA concerned may take further necessary action as per tlie decision of NC. ‐Case No.:38/1/80¨ Party Nallle:VICTORA
   ⅣIcet No/Datc:17/80- Status: IALC2/2019 ‐AUTO PVT.LTD ALC2/2019 18.12.2019 69 HQ Filc RLA File Lic.No/Date:0510409856 1Approvcd :01/80/050/00786/AM19/ :05/24/040/00681/AM19/ 06032019 1 ITCHS Code Export Item ITCHS Code Import Item Recommended Norms 84099199 Exhaust Rocker With Actuator Sub assembly (Part number 00-04s46s) (Per unit weight = 776 Gram) 87083000 Arm Rocker¨ Pan numbcr 00¨ 044788 (Per unit weight= 1847 Gram) 816401くg inclusive of l100/。 wastage a■er 200/O recovery 20

Decision: The Cornmittee considered tl-re case as per the agenda and decided to ratify the norms as per written comments of MSME as under : Ｌ 　 ｏ Ｓ Ｎ ITCHS Code Export Item Ｌ 　 ｏ Ｓ Ｎ ITCHS Code Import Item Recommended Norms l 87089200 Silencers (Muffl ers) And Exhaust Pipes; Parts Thereof- Part Name: Flow Dividing ASSY, PARTNo:- 8233r10s(s642 KG: 1736 Nos.) 1 72193390 Cold Rollcd Stainlcss Stccl Coil, Gradc― En l.4509. 2b Finish, 2.Omm X 1250X Coil 173701くg 2 87089200 Silencers (Mufflers) And Exhaust Pipes; Parts Thereof- Paft Name: Bracket Sheet Console, Part No.82395399 (1574.80 KGS : 3 1496 Nos.) 87089200 Silencers (mufflers) and exhaust pipes; parts thereof- Bracket Assy Damper, Part No. I I 2 1 6l 391 9000A (4888.84 KGS :44444 Nos.) つ ん 72202090 Cold Rolled Stainless Stccl Coil, Grade― EN l.4509, 2B Finish, 3.OMM X1250 X Coil 15391 Kg 4 87089200 Sibncers(mumers)and e油aust pipes;parts thereof― Stop Ring DPF,Part No 1625116804000A (465.36 KGS=3878 Nos.) 5 87089200 Silencers (mufflers) and exhaust pipes; parts thereof- Part Name: Bracket Assembly Canning Lower, Part No.823 79024 (2016.'70 KGS : 11142 Nos.) 6 87089200 Sibncers(mufflCrs)and C油aust pipes;parts thcrcof― Part Namc: BRACKET,PartNo 1583413X (H8182 KGS=6993 Nos.) 7 87089200 Silencers(mufflers)and e油aust pipcs;parts thcrco■Bracket,Part No.1583706X(2499.96 KGS= 20833 Nos.) | INote:The flrm should import relevant grade of Stainless Steel only. | IRA concerned may takc furthcr nccessary action as pcr thc decision ofNC.

Case No.:41/1/80- Pa“ y Name:VICTORA Mect No/Datc:17/80- Status:

ALC2/2019 AUTO PVT LTD ALC2/2019 18122019 70 Ho rilc l良LA Filc Lic.No/Datei05 10409909 Approvcd l :01/80/050/007897/AM19/ :05/24/040/00705/AM19/ 12032019 1 1Decision:The Committee considered thc casc as per the agcnda and decidcd to ratitt thC nOrills as per 21

V iwritten comments of MSME as under : import grad only RA concerned may take further necessary action as per the decision of NC. Case No。:42/1/80- ALC2/2019 Party Name:LARSEN& ITOUBRO LIMITED Mcet No/Date:17/80- ALC2/2019 1812.2019 Status: IHQ File 101/80/050/00790/AM19/ RLA Filc l:03/95/040/01295/AM19/ Lic No/Datc:0310827622 1Deferred 12.032019 71 'Decision: The Committee considered the case as per the agenda and noted that the case was first considered in M. No. 07/80 dated 17.01.2019 and a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the finn on 06.08.2019 followed by a reminder on l'1.10.2019. However, the firm vide email dated 18.12.2019 informed that the requisite infonnation as asked by NC is under preparation. Therefore, the Cornmittee decided to wait for the firm's reply. The Comrnittee also felt that the firm is delaying submission of information for the case which was picked up in RMS. Therefore, the Committee decided to refer the matter to PC-IV for withdrawing Para, 4.07A facility to the firm if they do not furnish the required infonnation within 15 days from the date of issuance of letter in this regard. The firm may be informed accordingly. Case is deferred.

Case No. : 49 I I 180- ALC2 12019 )P arty Nam e : DIAMOND

Mect No/Datc:17/80- Status: METAL SCREENS (P) LTD. ALC2|2019 18.12.2019 ,, HQ File RLA File Lic.No/Date:6510000026 Deferred '- :01/80/0501007971A}{191 :651241040100007/AM19/ 14.03.2019 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 16.05.2019 followed by reminders on 08.07.2019 & 11.09.2019. However, no comments have been received yet. Hence, the Committee decided to remind Ｌ 　 ｏ Ｓ Ｎ ITCⅡS Code Import Item Recommended Norms 1 72191300 Stainless StecI Shccts ln Coil,Hot RoHcd,Grade-439 Ti2, 4.01■m X 1500 29704 Kg つ ４ 72193290 Stainless Steel Shccts ln Coil,Cold RoHed,Grade-439 Ti2, 4.O lllin X 1500 24857 Kg 3 72193290 Stainless Stccl Shccts ln COil,Cold Ro‖ cd,Gradc-439 Ti2, 30 Mm X 1500 19668 Kg 4 72193390 Stainless Steel Sheets ln Coil,Cold RoHed,Grade-439 Ti2, 2.5 ⅣIm X 1500 43589 Kg 72193390 Stainless StccI Sheets ln COil,COld Rolied,Grade-439 Ti2, 200 Mm X 1500 65209 Kg 6 72193390 Stainless StccI Shcets ln COil,Cold RoHed,Grade-439 Ti2, 1.5 Min X 1500 42359 Kg 7 72193390 Stainless StccI Shccts ln Coil,Cold RoHcd,Gradc-439 Ti2, 1.2 Mm X 1500 34253 Kg II'he firm should relevant e of Stainless Steel 22

MSME for cxpcditing thc cOmmcnts Case is deferrcd. ICase NO。:46/1/80¨ ALC2/2019 Party Namc:ISGEC TITAN Mcct No/Datc:17/80- ,METAL FABRICATORS ALC2/2019 PRIVATE LIMITED 18.12.2019 Lic.No/Date:0510409960 IHQ Filc ‐RLA File 73101/80/050/00794/AM19/ :05/23/040/00557/AM19/ 15032019 1)ecision: Thc COmlllittcc considered the case as per the agenda and decidcd to retr ‐DPIIT hr cxaminatiOn as per advicc Of rcprcsentativc of ⅣIsⅣIE. ICasc is dcferrcd. lCase No.:47/1/80… lALC2/2019 HQ Filc

Case No.:7/2/80-

ALC2/2019 Pa●y Namc:VICTORA AUTO PVT.LTD IRLA Filc Mcct No/Datc:17/80- ALC2/2019 18122019 Lic.No/Date:0510409964 Status: Deferred the case to Status: Approved ,Status: :01/80/050/00795/AM19/ :05/24/040/00712/AM19/ 18.03.2019 Decision: The Committee considered the case as perthe agenda and decided to ratifli the norms as per written comments of MSME as under : ‐74 : tNote: The firm should import relevant grade or stairrtess steel onl1,. RA concerned may take fufther necessary action as per the decision of NC. Party Namc:AYYAPPA Mcet No/Date:17/80- ,CNC PVT LTD ALC2/2019 18.122019 ‐ IHQ File iRLA Filc Lic.No/Datc:0710114686 .Approvcd 751?1/'94959/901"件Yl?/ 197/24/040/00299/AM19/ 20032019 1Decision:The COmmittcc cOnsidercd thc casc as pcr agenda and dccidcd tO ratitt thC nOrms as pcr written colllments OfMSNIIE as undcr: ITCHS Code Export Item Sl. No。 ITCIS Code Import Item Recommended Norms Ｌ 　 ｏ Ｓ Ｎ ITCIS Code Import Item Recommended Norms 1 72193390 Stainless Steel ln COil,Cold RoHcd,Grade-439Til,2B, 1.20 ⅣIⅣI X 1500 33544 Kg 2 72193390 Stainless Steel ln COil,Cold RoHed,Gradc-439Til,2B, 1.50 MNIIX 1500 30086 Kg 3 72193390 Stainless Steel ln COil,COld Ro‖ ed,Gradc_439Ti2,2B, 200 MM X 1500 35717 Kg 4 72193390 Stainless Stecl ln COil,COld RoHcd,Grade-439Ti2,2B, 2.50 NIIM X 1500 34134 Kg 23 ||

88033000 Aircraft Components 1 76061200 Alulninium A1loy Platc /Block 30832 27 Kg with 483.670/0、vastage 2 76061200 Aluminium Allov Bar 1025 Kg with 358 94 0/0 、vastage 3 76061200 Aluminium Alloy Sheet 398 Kg with 268.980/0 wastage 4 76061200 Aluminium Alloy Round Bar 408 Kg with 6.670/0 wastagc 5 81089090 Titanium AHoy Piate/Shcct 1245,72 Kg with 132.89% wastagc 6 72249099 Alloy Steel Bar 1374.56 Kg with 513.640/0 wastagc Note: The firm should import relevant grade of Aluminium only. RA concerned may take furlher necessary action as per the decision of NC.

Case No.:18/5/80…ALC2/2019 Pa“y Namc:MAINI

PRECISION PRODUCTS ILIMITED Meet No/Datc:17/80- status: ALC2/2019 18.122019 1 HQ File RLA File Lic.No/Date:07101 14132 Deferred -. :0118010501000561Ali{201 :071241040100306/AM19/ 29.03.2019 t6 Decision: The Committee considered the case as per the agenda and noted that the firm's reply was setrt to DHI on 22.11.2019 for examination of the case. However. no cornments have been received yet. Therefore, the Committee decided to remind DIII for expediting the comments. Case is deferred.

Case No.:5/2/80-ALC2/2019 Paty Namc:VIPRA

CLOSURES PRIVATE ILIMITED I HQ Filc RLA Filc i01/80/050/00005/AM20/ :03/95/040/01384/AM19/ Decision: Tlie Committee considered the case as per the agenda and decided to ask frorn the firm to furnish the following information as per advice of representative of MSME:

1. Detail technical drawings with dirnension of each export product, Catalogue, if any, may also 7j be furnished.
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) foi each imported and indigenous input in the export product may be indicated. Net weighi along with details of other imported input to be used in the resultant product and souglit to U" i*po.ted/procured from sources other tha, the license, if any, may arso be indicated.
4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, *urtug", clairned at each stage of manufactu五ng wlh complcte justincation and supponcd by docul■entary cvidcncc/drawings Mcct No/Datc:17/80- ALC2/2019 18.122019 Lic.No/Datc:0310828134 1Dcfered 03042019 Status: 24

Case No.:14/5/80-ALC2/2019

HQ File :01/80/050/00052/AM20/ 78 rCase is deferred. Party Name:UNI VTL PRECISION PVT.LTD. Mcct No/Date:17/80- ALC2/2019 18122019 Lic No/Date:6510000027 0504.2019 Status: Defered Decision: The Committee considered the case as per the agenda and decided to ask again from the firm to furnish the following informatiou as per advice of consultant (Tech-3): I . Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 3. Use of export product. | ― ― | 179 RLA File ILic.No/Date:0410165451 11.04.2019 :01/80/050/00009/AM20/ :04/24/040/00294/2へM19/ n: The Committee considered the case as per the agenda and noted that the firm's reply was scnt to DIII on 12.12 2019 fOr cxanlination ofthc casc HOwevcr, nO c01■ rnents havc becn reccived yet. Hence, the Committee decided to wait for the comments. Case is deferred. :65/24/040/00006/AM19/ ParサNalne:MuDHRA BLANC PRIVATE LTD HQ File Pa●y Name:VEELINE MEDIA LIMITED l. Net content of import items at Sl. No.9, 10 & 11 required per unit of export item. Mcct No/Date:17/80- ALC2/2019 18.122019 Lic.No/Datc:0210209114 Dcfered 1604.2019 1 to ask from the firm to of export item & quantity ls per unit

Case No.:4/3/80¨ ALC2/2019

25 etc. Case is deferred. RLA File IMcet No/Date:17/80- ALC2/2019 18.12.2019

Case is deferred.

Case No.:5/3180-ALCZl20l9 Paftv Narne: SMC

Mcct No/Date:17/80- IStatus: CORPORATION(INDIA) ALC2/2019 PRIVATE LIMITED 18.12.2019 HQ Filc RLA Filc Lic.No/Date:0510410292 1Dcferred *, :01/80/050/000111AM201 :051241040100020/AM20l 18.04.2019 Decision: The Cornrnittee considered the case as per the agenda and noted that the firm lras lurnished tlre reply of the deficiency letter dated 06.08.2019. TheComrnittee decided to forward the reply of the firm to Consultant (Tech-3) for their comments Case is deferred.

Case No.:6/3/80-ALC2/2019 Pa■y Namc:TINITA Mcct No/Datc:17/80- Status:

IENGINEERING PVT LTD. ALC2/2019 1 1812.2019 1 HQ File RLA File Lic.No/Date:03 1 0828410 1Dcfcrrcd 1825もふζi61:fIざё6h二i品3861ζ籠とおa thさ cttζ is pさ r thさagcidi aid noted tiat a aciigicジ ぉ.8, | lsecking ccnain infOrmation as raiscd by I)PIIT was sent to the flrm On 08 07 2019 fo1lowed by ‐ rclllinders on 17.10.2019 & 10122019. Howcvcr, nO rcply has bccn rcccivcd yet Hcncc, thc l Comn■ittcc dccided tO wait for the flrln's rcply Case ls dcfcrred. iCase No.:8/3/80-ALC2/2019 Party Namc:L&T― MHPS Mcct No/Datc:17/80- Status: | | ITURBINE GENERATORS ALC2/2019
‐

Case No.:9/3/80¨ ALC2/2019 Pa“ y Nalllc:RAYCHEM

RPG PVT LTD 84‐ HQ F‖ c RLA Filc :01/80/050/00015/AM20/ :03/95/040/01371/AM19/ IDeCision:The Committee cOnsidercd the casc as pcr thc lscntto DPIIT on 16 12.2019 for cxanlination ofthe case 1812.2019 1 Lic No/Datc:0310828481 Dcfcrred Mcet No/Datc:17/80- status: ALC2/2019 18.12.2019 Lic.No/Datc:0310828517‐ Deferrcd 2304.2019 agenda and noted that thc flrlll's reply was Ho、vevcr,no commcnts havc becn rcceivcd HQ Filc PRIVATE LIMITED RLA F‖ e :0l/80/050/00014/AM20l :0319510401013541AM191 23.04.2019 g3 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firrn on 06.08.2019. However, the firm vide letter dated 14.09.2019 informed that the Project Engineering & Detail Design is in progress and is expected to be complete by January 2020 and sought more time to respond. Therefore, the rCommittee decided to wait for the firm's reply. ,Case is deferred. 26

yet Hcllce,thc Comlllittce decidcd to wait fOr thc cOmillcllts Casc is deferrcd.

Case No.:8/5/80-ALC2/2019 Palty Nainc:GODREJ& ⅣIcct No/Date:17/80-

IBOYCE MFG.CO.LTD. ALC2/2019 18.12.2019 Status: HQ Filc RLA Filc Lic.No/Datc:0310828981 Deferred :01/80/050/00046/Aゝ/120/ 103/94/040/00093/AM20/ 13.052019 85 Decision: The Comminee considered the case as per the agerrda and noted that the firm's reply was sent to DPIIT on 12.12.2019 for exarnination of the case. However, the representative of DPIIT again requested forthe complete set of application. Therefore, tl,e Committee decided to send the complete set of application to DPIIT. Case is deferred.

Case No.:10/5/80-ALC2l20l9 Party Name: I-TECH PLAST Meet No/Date:17180- Status:

TNDIA PVT.LTD.(EOU) ALC2|2019 18.12.2019 HQ Filc RLA File Lic.No/Datc:03 10828994 1Deferred :01/80/050/00048/AM20l :03194/040/000881AM201 14.05.2019 86 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-l) was sent to the firm on 17.09.2019 followed by reminders on 1 1 .11 .2019 & 10.12.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the finn's reply. ,Case is deferred.

Case No.:5/5180-ALC2l20lg Partv Name: AZAD

ENGINEERING PRIVATE ALC2/2019 LIMITED 18.12.2019 HQ File RLA Filc Lic No/Datc:0910067528.Defcrrcd :01/80i050/000431AM201 :0912410401000611AM20t 1s.05.2019 87 Decision: TIre Cotnmittee considered the case as per the agenda arrd noted thal a deficiency letter ,seeking ceftain information as raised by DHI was serlt to the firm on 16.10.2019 followed by a reminder on 10.12.2019. However, no reply has been received yet. Hence, the Committee decided to Case is deferred. Case No。:6/5/80¨ALC2/2019 Paty Namc:AZAD ENGINEERING PRIVATE ILIMITED IHQ File 101/80/050/00044/AM20/ Mcct No/Datei1 7/80- status: Meet No/Datc:17/80- status: ALC2/2019 ‐ 1812.2019 1 Lic No/Datei0910067529 1E)efcrrcd 15052019 ‐88 RLA File :09/24/040/00059/AM20/ 27

rDecision: The Committee considered the case seeking ceftain information as raised by DHI reminder on 10.12.2019. However, no reply has rCase is deferred. as per the agenda and noted that a deficiency letter was sent to the finn on 16.10.2019 followed by a been received yet. Hence, the Committee decided to Mcet No/Datc:17/80- Status: ALC2/2019 18.12.2019 Lic.No/Date:0910067530 Deferrcd 1505.2019 1 iCase No.:7/5/80-ALC2/2019 1Party Nallle:AZAD HQ File ENGINEERING PRIVATE LIMITED RLA Filc :01/80/050/00045/AM20/ :09/24/040/00060/AM20/ 89 De"i.ior: The Committee considered the case as per the agenda aud noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019 followed by a ,reminder on 10.12.2019. However, no reply has been received yet. Hence, the Cornmittee decided to Case is deferred.

Case No.:1/5/80-ALC2/2019 Pa●y Name:PAHARPUR Meet No/Date:17/80- Status:

COOLING TOWERS ALC2/2019
‐ LIMITED 18 12 2019 1HQ File RLA File Lic No/Date:0210209171 Dcfcrcd 101/80/050/00039/AM20/ 102/24/040/00012/AM20/ 16.052019 rDecision: The Committee considered the case as per the agenda and noted that a copy of application 'was sent to DPIIT for examination of the case on 18.10.2019 followed by a reminder on 11.12.2019 alongwith the complete setof application. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ‐90 Case No。:7/9/80¨ ALC2/2019 HQ Filc Party Namc:BAPL IROTOTECH PRIVATE ILIMITED RLA Filc Mcct No/Datc:17/80- ALC2/2019 18.12.2019 Lic No/Datc:5610005614 1605.2019 Status: Approved :01/80/050/00132/AM20/ :56/24/040/00039/AM19/ Decision: The Committee considered the case as per agenda and decided to ratify the norms as per , written comments of MSME as under: 91 Import Item LLDPEICORENE 87089900 EXTERNAL FILLER NECK Recommended Norms Diesel Exhaust Fluid Tank Net Content 39011010 73181900 1.05 Kgs/Kg content in the export product As per General Notes at sl. no. 4 - Net to Net basis without 28 ITCHS Code Bxport Item Ｌ 　 ｏ Ｓ Ｎ ITCHS Code つ ４

LLDPE ICORENE― 84000Kgs wastage 3 73181900 INTERNAL FILLER NECK As per GeneralNotes at sl. no. 4 - Net to Net basis without wastage 4 87089900 FILTER WITH OR WITHOUT MAGNET As per GeneralNotes at sl. no. 4 - Net to Net basis without wastage 5 87089100 PLUG FOR ADBLUE TANKS As per General Notes at sl. no. 4 - Net to Net basis without wastage 6 40169320 0¨RING As per GeneralNotes at sl. no. 4 - Net to Net basis without wastage 7 73269099 HOSE CLAMP As per GeneralNotes at sl. no. 4 - Net to Net basis without wastage ,Note: The firm should import relevant (LLDPE ICORENE,'only. 'RA concerned may take further necessary action as per the decision of NC.

Case No. : 13 I 5180t- ALCL /2019 P afi Narne : HE U RTEY

PETROCHEM INDIA PRIVATE LIMITED RLA Filc Mcct No/Datc:17/80- status: ALC2/2019 1812.2019 Lic No/Datci3410045150 Dcfcred HQ File :01/80/050/00051/AM20/ :34/24/040/00059/AM20/ 17.052019 1921`きヽ161:ille ё6“島任88861まdcred ihcあsc is per the agenda and nOted thtt a denciencyに■er ‐ secking ccrtain information as raised by E〉HI was scntto the flrm 011 18 11 2019 HOwevcr,no rcply has bccn rcccived yct Thcreforc, thc COnllllittec decidcd tO relllind thc ■rm fOr fllrnishing the ‐ requisitc information within 15 days Casc ls dcfcrrcd. | ‐Case No.:12/5/80-ALC2/2019 Pa“ y Nalllc:DILIGENT SCM McetNo/Date:17/80- Status: | | ISOLUTIONS PRIVATE ALC2/2019 1 1 1 ・LIMITED 18 12 2019 1HQ FHc lRLA Filc Lic.No/Datc:0910067545 Defcrred 93:01/894050/00959件M194 :0?(24/040/09078/AM20/ 20.052019 Decision: The COmlllittee considcred the casc as per the agenda and nOted that a dcflciency lcttcr sccking ceiain informatiOn as raiscd by ⅣISPII〕was scnt to thc flrm On 16 10.2019 fO110wcd by a rel■inder on 10 12.2019.Ho、vcver,nO reply has been reccived yet. Hencc,thc(3ollllllittec dccidcd tO ‐ 、vait 10r thc irlll's reply 29

Case is deferred.

Case No.:21/5/80-ALC2/2019 Party Name:CERATIZIT Mcet No/Datc:17/80- Status:

NDIA ROUND TOOL ALC2/2019 SOLUTIONS P LTD 18 12 2019 HQ File RLA Filc Lic No/Date:0710114952 Dcfcrred :01/80/050/00059/AM20/ :07/24/040/00017/AⅣ120/ 24052019 94 1Decision: The Comlllittee considered the casc as per the agcnda and noted that thc hard copy of lapplication has not yct bccn rcccivcd fl・ oln the flrln&RA,]Bangalore and in this rcgard a lettcr was lSCnt tO the flrm&RA,Bangalore on 15.07.2019 fo110wcd by a rcminder On 18.10.2019.However,no information has becn received so far Thcrcforc, thc Colllinittec dccidcd to remind again RA, Bangalore&the applicant for sublllitting thc complcte set of application Casc ls deferrcd Case No。:1/7/80¨ALC2/2019 ‐Paty Name:CROWN Ⅳleet No/Date:17/80- Status: ICLOSURES PVT LTD. ALC2/2019 1 18.12.2019 1 IHQ Filc RLA Filc Lic.No/Date:03 10829905 1Deferred :01/80/050/00098/AM20/ :03/94/040/00246/AⅣ120/ 25062019 195‐ Decision: Thc Collllnittcc considcrcd thc casc as pcr thc agenda and notcd that thc llard copy of ‐ ‐ application has not yet becn rcccived fl・olll the frm&RA,Ⅳlulnbai and in this rcgard a letter was sent to the flrm &RA, PIurnbai on 18.102019, Howcvcr, nO infOrination has bccn rcccivcd so far. Thcrcforc,the Colllinittec dccidcd to remind again RA,Ⅳ Iumbaiでセthc applicant br subl■itting the l lC0111plctc sct of application. | ICasc is defcrrcd. ‐ ICase No.:2/7/80-ALC2/2019 PaⅢy Nainc:OSWAL PUMPS McctNo/Datc:17/80- Status: LIMITED ALC2/2019 1812.2019 HQ File lRLA File Lic.No/Datc:3310030557 Deferrcd ‐96 :01/80/050/00099/AM20/ :33/24/040/00012/AM20/ 25.06.2019 1 1)ecision: The Comlllittee considcrcd the case as pcr the agcnda and decidcd to refer thc case to ‐ IDPIIT for cxamination as per advicc ofreprescntativc of ⅣISⅣIE ICasc is dcferred

Case No.:3/7/80-ALC2/2019 Paty Nalllc:OAM SAAI Mcct No/Datc:17/80- Status:

INTERNAT10NAL INC ALC2/2019 18.122019 97 HQ Filc RLA Filc Lic No/Datc:05104‖ 061 Dcferrcd i01/80/050/00100/AM20/ :05/24/040/00181/AM20/ 26.06.2019 ‐ 1)ecision: Thc(3omΠ littee considcrcd the casc as pcr the agcnda and dccidcd tO ask frolll thc flrnl to ‐fllrnish the foHOwing information as pcr advice ofrcprcscntativc ofMSME: 30 ▼

1 . Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred.

Case No.:4/7180-ALC2l20l9 ,Party Name: AZAD

HQ Filc :01/80/050/00101/AM20/ 98 Decision: The Cornmiftee considered seeking certain information as raised reminder on 10.12.2019. However, no Case is deferred.

Case No.:5/7/80¨ ALC2/2019 Party Namc:AZAD

ENGINEERING PRIVATE LIMITED RLA Filc Meet No/Datc:17/80- IStatus: IENGINEERING PRIVATE ALC2/2019 LIMITED 18 12 2019 1RLA Filc Lic.No/Datc:0910067697 Defered :09/24/040/001381AM20/ 26062019 the case as per the agenda and noted that a deficiency letter by DHI was sent to the firm on 16.10.2019 followed by a reply has been received yet. Hence, the Committee decided to ‐99 :01/80/050/00102/AN120/ :09/24/040/00142/AM20/ Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019 followed by a reminder on 10.12.2019. However, no reply has been received yet. Hence, the Committee decided to Case is deferred. HQ Filc ICase No.:6/7/80…ALC2/2019 HQ File i01/80/050/00103/AM20/ ParサName:AZAD ENGINEERING PRIVATE LIMITED ‐RLA Filc :09/24/040/00140/AM20/ Meet No/Datc:17/80- Status: ALC2/2019 18.12.2019 Lic.No/Date:0910067698 Dcfcrrcd 26062019 Mcct No/Date:17/80- Status: ALC2/2019 18122019 Lic No/Datc:0910067699 1Defered 26062019 1 100 う ０

獄離縫麒難漢難聾 Case Is dcfcrrcd

Case No.:7/7/80-ALC2/2019 Pa●y Name:AZAD

ENGINEERING PRIVATE LIMITED IHQ Filc RLA Filさ Lic NO/Datei0910067700 Dcfcrcd :01/80/050/001o4/AM20/ 1o9/24/040/00139/AM20/ 2606.2019 ° 1暮 輛攀幽意I鐵蓮離欄榊熙 ‐ Casc is dcferred.

Case No.:8/7180-ALCZl20lg party Name: AZAD

ENGINEERING PRIVATE LINIIITED Mcet No/Datc:17/80- status: ALC2/2019 1812.2019 Mcct No/Datei1 7/80- lstatus: ALC2/2019 18.12.2019 1 HQ Filc iO1/80/050/00105/AM20/

Case No.:9/7/80… ALC2/2019 Palty Name:AZAD

HQ File :01/80/050/00106/AM20/ RLA FHc Lic.No/Date:0910067701‐ Dcferrcd i09/24/040/001371ヽM20/ 26.06.2019 102 Decision: The comrnittee considered the :Te as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI wai sent to-the firm on 16.10.2019 fbllowed by a reminder on 10'12.201.9. However, no reply has been received yet. Hence, the Comrnittee decided to Case is deferred. Mcet No/Date:17/80- lstatus: ENGINEERING PRIVATE ALC2/2019 LIMITED 18.12.2019 RLA File Lic No/Date:0910067702 Dcfcrred :09/24/040/00141/AM20/ 26.06.2019 103 D""ition: The Committee considered the case as per the agenda and noted that a deficiency letter 'seeking certain information as raised by DHI wai sent to the finn on 16.10.2019 followed by a 'reminder on 10.12.2019. However, no reply has been received yet. Hence, the Committee decided to Case is deferred. ICase No.:10/7/80- 1041ALC2/2019 Party Namc:P.Ⅳ〔.ELECTRO Mcct No/Date:17/80- AUTO PvT.LTD. ALC2/2019 18.12.2019 32 Status:

ICase No.:11/7/80- ALC2/2019 1HQ File 105:91/8049504?9198/今M20/

Case No.:12/7/80¨

IAIノC2/2019 HQ Filc 106:91/80?,919919?今ヽ 419/ ICase No.:13/7/80- IALC2/2019 1HQ File :01/80/050/00110/AM20/ HQ Filc RLA File 101/80/050/00107/AM20/ :31/83/040/00o48/AM20/ Decision: The committee considered the case as per the agenda application has not yet been received from the finn &RA, puie a,d the finn &RA, Pune on 08.08.2019 followed by a reminder on I r. r has been received so far. Therefore, the cornrnittee decided to applicant for submitting the cornplete set of applicatiorr. Case is deferred. Lic.No/Date:3 110067458 1Dcferred 28.06.2019 and noted that the hard copy of in this regard a letter was sent to 1.2019. However, no infonnation remind again RA, Pune& the Status: Status: Decision: The Committee considered the case as per the agenda and noted that Meity has sought ceftain information from the firm vide letter dated 16.12.2019. Therefore, the Committee decided to wait for the reply/comments. Case is deferred. Paty NamcIPOLYCAB Mcet No/Datc:17/80- INDIA LIMITED ALC2/2019 18.12.2019 RLA Filc Lic.No/Date:03 10830021 1Defcrred :03/95/040/00295/AM20/ .01.072019 Pa■y Namc:AUTOCOMP Mcct No/Date:17/80- status: CORPORATION PANSE ALC2/2019 PRIVATE LIMITED 18 12.2019 RLA Filc Lic.No/Datc:3110067460 Deferrcd i31/83/040/00050/AM20/ 01.07.2019 Decision: The Committee considereclthe case as per the agenda and noted that a copy of application was sent to DHI on 22.10.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments. Case is deferred. IPaty Nalllc:BANGALOM Mcct No/Datc:17/80- IBIOTECH LABS PVT LTD, ‐ALC2/2019 18.122019 RLA File Lic.No/Datc:0710H51 22 1Deferrcd :07/24/040/00082/AM20/ 103.07.2019 1 107 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 12.07.2019 followed by a reminder on 11.0g.2019. However, no comments have been received yet. Hence, the Cornmittee decided to wait for the comments. Case is deferred ParサName:GENESIS 108 1Case No.:14/7/80- 33 Mect No/Date:17/80- Status:

ITCHs Code Export Item ITCHS Code Import Item Recommended Norms 45526Kg inclusive of 24.5% wastage after 113'd recovery from 84099199 Exhaust Rockcr with Actuator Sub asscmbly(Palt numbcr 00-045465) (Per unit weight=0.o3058 Kg) 87083000 Arm Rocker - Part number 00-044788 lNote: I Decision: The Comrnittee considered the case as per tlre :per written comments of MSME as under : I 1. Per unit weight of export item is 0.0305g Kg. 2. The firm should import relevant item only. RA concenred may take further necessary action as per the decision of NC. ALC2/2019 HQ Filc :01/80/050/00111/AM20/ PACKAGING PVT.LTD. RLA File :07/24/040/00075/AM20/ Paty Nalnc:D00WoN CLIMATE CONTROL ALC2|2019 18.12.2019 Lic.No/Date:0110115123 Approved 03.01 .201e agenda and decided to ratifu the norms as Mcct No/Date:17/80- status: ALC2/2019
‐ 18.122019 Lic.No/Date:3210079031‐ Defcrred 1907.2019 ‐ ICase No.:15/7/80… lALC2/2019 I INDIA PRIVATE LIMITED 18.12.2019 1HQ FiiЪ ~ 1良LA File Lic No/Datc:6610000035 Dcfcrrcd 101/80/050/00112/AM20/ :66/24/040/00003/AM20/ .03072019 鵬揚恥h響ギ淵篇凱哺Ⅳ肥:Ⅷ悧酬‖ 『 r懲』 Te脚穏 )19. HO、vcvCr, 1lo informatiOn has bcen reccived sO far Thercforc,the COmmittec dccidcd tO remind again RA,Vijayawada&thc applicant for SLlbnlitting the complete set ofapplicatiOn. ICasc is dcferred. Case No。:43/11/80- ALC2/2019 HQ Filc LIMITED RLA File Pa■y Name:ERBATECH Mcct No/Datc:17/80- status: MACHINERY PRIVATE ALC2/2019 ,O :01/80/0501001691AM201 :32t2U040t0006UAM20t IDecision:The COmmittcc cOnsidcred the casc as per the agenda and nOted that a dさ flciさAcジi818r secking certain infOrmatiOn as raised by Consultant(Tech‐ 3)was sent tO the irm On 13 12 2019 1HOWCVer,.o reply has bccn rcceivcd yct Hcncc,thc COml■ htee dccidcd tO wa■fOrthc irm's rcply. ‐ Case is deferred. 1l Case No.:1/9/80-ALC2/2019 1Party Name:TOLIA 34 MeetNo/Date:17180- Status: ⌒

INDUSTRIES ALC2/2019 18.12.2019 IHQ File lRLA Filc Lic No/Datc:0310830453 Defcrrcd i01/80/050/00126/AM20/ 1:o3/95/040/00218/AM20/ 22.072019 1:F潔1,嘔:諄1,11鷺驚霊 1::11螢ξ lJ滉常猪鑑1:#」∫℃liЪF燎騒 rti 10.12.2019 HO、vcvcr,■o cOmments havc becn rcccivcd yct.Hcncc,the C0111lllittce decidcd tO wait lbr the colllments. Case is deferred. ICase No.:3/9/80-ALC2/2019 1Paty Namc:DYNA FORCE Mcet No/Date:17/80- status: | IHYDRAULICS PRIVATE ALC2/2019 1 LIMITED 18.122019 1 12 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from the firm &RA, Pune and in this regard a letter was sent to 'the firm &RA, Pune on 18.10.2019. However, no information has been recJived so far. Therefore, the Committee decided to remind again RA, Pune& the applicant for submitting the complete set of ; iapplication. l Case is deferred. HQ File :01/80/050/00128/AM20/ HQ File :01/80/050/00129/AM20/ HQ Filc l14 :01/80/050/00130/AM20/ RLA Filc Lic.No/Date:3 11 0067484 1Dcfcrred :31/83/040/00067/AM20/ 25.072019
‐ RLA Filc lLic.No/Datc:0810145826‐ Dcferrcd i08/24/040/00135/AM20/ 25.072019 Status: RLA Filc Lic.No/Datc:3110067486‐ Dcfcrrcd :31/83/040/00066/AM20/ 26.072019 Case No。:4/9/80…ALC2/2019 ParりNal■e:RAttAMANI Mcct No/Date:17/80- METALS AND TUBES LTD ALC2/2019 18.12.2019 Status: I3 Decision: The Committee considered the case as per the agenda and rroted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 20.11.2019. However, no reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the requisite information within l5 days. Case is defeye{, ICase No.:5/9/80-ALC2/2019 1Pany Namc:ROTHE ERDE Mcct No/Datc:17/80‐ INDIA PRIVATE LIMITED ALC2/2019 18.122019 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received frorn the firm &RA, Pune and in this regard a letter was sent to thefirm&RA,Puneon l8.l0.20l9followedbyareminderon20.1l.20lg.Hiwever,noinformation has been received so far. Therefore, the Committee decidecl to remind again RA, pune& the 35 ⌒

applicant for subrnitting the complete set of application. Case is deferred. HQ File RLA File Lic.No/Date:0310g3060g Deferred ,:01/80/050/00168lAM20t :03r95r040t00371tAM20t 26.07.2019 ll5 Decision: The Colnmittee considered. tlre case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai& the firrn to furnish the hard copy of application for examination of the case. Case is deferred.

Case No.:42/11/80-

ALC2/2019 ‐Case No.:12/9/80- IALC2/2019 1HQ File :01/80/050/00137/AM20/

Case No.:41/11/80-

AIノC2/2019 HQ Filc :01/80/050/00167/AM20/

Case No.:13/9/80¨

ALC2/2019 H8‐ HQ Filc ParサNamei PREMIER .INDUSTRIAL CORPORATION LIMITED ParサName:PHOENIX FOILS PVT.LTD. Mcct No/Date:17/80- lstatus: ALC2/2019 1 18.12.2019 Mect No/Datc:17/80- status: ALC2/2019 18.12.2019 RLA File Lic.No/Date:05104H435 1Defcrred i05/24/040/00251/AA/120/ o2.082019 ‐ Pa■y Namci VICTORA IAUTO PvToLTD Mcct No/Datc:17/80中 status: ALC2/2019 1 18.122019 RLA File Lic.No/Date:0310830770 Defcrred :03/95/040/00459/AM20/ 02.082019
‐ Party Name:SSP PVT.LTD.Mcet No/Date:17/80- Sttttiξ : ALC2/2019 1 18.12.2019 RLA Filc Lic.No/Date:0510411438 1Dcfercd 1 16 Decision: The Committee considered the c.ase_as per the agenda and noted thal the hard copy of application has not yet been received from the finn &RA, New Delhi and i, this regarJ a i;;;;; sent to the firm &RA, New Delhi on 25.09.2019 followed by a rerninder on 18.10.)019. However,, no information has been received so far. Therefore, the Committee decided to remind again Rn, New Delhi& the applicant for submitting the complete set of application. Case is deferred. 117 D"cision: The Committee cousidered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Comrnittee decided to request from RA, Mumbai& the firm to furnish the hard copy of application for Case is deferred. 36

Case No.:45/11/80-

AI」C2/2004 1HQ Filc PRIVATE LIMITED RLA File :01/80/050/00138ノAM20/ :o5/24/040/002591ヽM20/ o5082019 :Decision: The committee considered the case as per the agenda seeking certain information as raised by DpIIT was sent to the reply has been received yet. Therefore, the committee decided to 1..requrslte lntormation within l5 davs. ,Case is deferred. and noted that a deficiency letter firm on 20.11.2019. However, no remind the firm for furnishing the 18.12.2019 Lic.No/Datc:03 1083 1568 1Defcrrcd 16.092019 1 Lic.No/Date:0310831569‐ Dcferrcd 16.09.2019 Mcct No/Date:17/80- status: ALC2/2019 18.12.2019 Lic No/Date:0310832012 DefcrFCd 04.102019 Palty Nallle:L&T_PIIHPs Mcct No/Datc:17/80- TURBINE GENERATORS ALC2/2019 Status: Status: ■19 |:01/80/050/00171/AM20/ 1:o3/95/040/00574/AM20/ Case No。:46/11/80- AIりC2/2004 HQ Filc Decision: The Committee considered the case as-per the agenda and noted thar tlre lrard copy of application has not yet been received from RA, Mumbai L the firm. Therefore, the Committee decided to request from RA, Mumbai& the firm to furnish the hard copy of application for Case is deferred. ParサNamc:L&■MHPs Mect No/Datc:17/80- BOILERS PVT LTD ALC2/2019 1812.2019 RLA File :01/80/050/00172//AM20/ :o3/95/040/005881民M20/ 120 D"cition: Tlie cornmittee considered tlre case as per the agenda and noted that the lrard copy of application has not yet been received from RA, Mumbai & the firrn. Therefore, the Committee decided to request from RA, Mumbai& the firm to furnish tlie hard copy of application for Case is deferred. iCase No。:1/13/80¨ ALC2/2019 HQ File Paty Nalllc:RONCH POLYMERS PVT LTD RLA Filc :01/80/050/00186/AM20/ :03/95/040/006541民 M20/ 12l De"ision: The committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the finn. Therefore, the Comrnittee ldecided to request from RA, Mumbai& the firm to fumish the hard .opy oi "ppri."ii", i". Case is deferred. Paty Nallle:FERRUM 1221Case No.:2/13/80- 37 Mcct No/Datc:17/80- status:

ALC2/2019 HQ Filc 101/80/050/00187/AM20/

Case No.:3/13/80-

ALC2/2019 HQ File 101/80/050/00188/AA/120/ Case No。:4/13/80¨ ALC2/2019 HQ File 124191/194950/00189/AM20/ ‐ Case No。:5/13/80- ALC2/2019 ‐ HQ Filc :01/80/050/00190/AM20/ IEXTREME ENGINEERING PRIVATE LIMITED RL/ゝFilc :05/23/040/00265/AM20/ ALC2/2019 1 18.12.2019 Lic No/Date:05 104 12040 1Deferred 07102019 Decision: The Cornrninee considered tlre case as per application has not yet been received from RA, New decided to request from RA, New Delhi& the firm Case is deferred. the agenda and noted tliat the hard copy of Delhi & the firm. Therefore, the Committee to furnish the hard copy of application for Party Name:AVLIGHT Mcct No/Date:17/80- statu:: AUTOMoTIvES PVT.LTD.ALC2/2019 1 18.12.2019 1 RLA File Lic No/Date:0510412058 1Dcfered :05/23/040/00266/AM20/ o9.lo.2019 1 PaゥNamc:L&T― MHPs Mcet No/Datc:17/80- status: TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED 18.122019 RLA Filc Lic.No/Datc:0310832H6‐ Dcfcrred :03/95/040/00681/AM20/ 1o.lo.2019 Pa“y Namc:L&■MHPs Mcct No/Date:17/80-
‐ status: ITURBINE GENERATORS ALC2/2019 1PRIVATE LIMITED 18.122019 1 RLA Filc Lic.No/Date:0310832159‐ Dcferrcd 103/95/040/00655/ノヘM20/ 11.lo 2019 123 De"isio,, Th. iommittee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi& the firm to furnisli the hard copy of application for Case is deferred. Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI for examination of the case on 19.11.2019. However, no "o,r*Lnts have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments. Case is deferred. つ ４ Decision:The COmⅡlittcc cOnsidercd thc casc as pcr thc agenda and noted that a cOpy of applicatiOn was scnt tO DIII fOr exalllinatiOn of the casc On 22.10.2019. HOwcver, no conllllcnts have been rcceived yet ThcrefOre,the COlllmittee decidcd to renlind DHI fOr expediting thc cOllllllCntS. Case ls defcrred. 38 ハ

Party Namc:GODREJ& BOYCE MFG.CO LTD | IHQ File ~ RLA Filc ‐126101/80/050/00191/AM20/ :o3/94/040/00505/AM20/ 1 3辮 ∬rlittl脚肝 ∝C° “ d∝ed ttc cttc tt ptt■e ‐ .Case is dcたrred Mect No/Datc:17/80- status: ALC2/2019 18.122019 Lic.No/Date:0310832178 Dcferrcd ll 10 2019 ‐ agenda and dccided tO refer the case tO Mcct No/Datc:17/80¨ Status: Case No。:6/13/80- ALC2/2019 ‐Case No.:7/13/80¨ :ALC2/2019 1HQ File Party Namc:ISGEC IHITACHIZOSEN LIMITED ALC2/2019 ‐ 18.122019 Lic.No/Date:05 10412096 1Defcrred :01/80/050/00192lAM20l :05t23t040t00269rAM20r I 1.10.2019 127 D"cision: The Committee cortsidered the case as per the agenda and noted tSat the 6ard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi& the firm to furnish the hard copy of application for ls deferred. ‐RLA File ‐ ｌ ｃ ａ ｓ ｅ 一

Case No.:8113/80-

Party Name: AZAD IALC2/2019 Mcet No/Datc:17/80- status: 18122019 Lic.No/Datc:0910068080.Defcrred ENGINEERING PRIVATE ALC2/2019 LIMITED RLA Filc HQ Filc 101/80/050/00193/AM20/ :09/24/040/00347/AM20/ 1410.2019 1281btiζ i3轟:十五さёも島1lilec 8。nζ iacred thc casも as pCr thc agcnda and iOia that thc Aaiむ 8。py of lppliCatiOn has not yct becn reccived from thc flrm&RA,Hyderabad and in this rcgard a lctter was scntto the Arm&RA,Hyderabad on 10 12.2019.Howcvcr,nO informatiOn has becn rcceivcd so far. IHCnCe,the Committcc decided tO wait fOr thc cOlη plcte sct of applicatiOn fOr examinatiOn of thc casc. ‐ Casc is dcfcrrcd .Casc No。:9/13/80- ALC2/2019 IHQ File RLA File Lic No/Datc:07101 15559 1Defcrrcd 129:91ダ949,91991γ ttY70 :0724/040/00152触M20/ 1410.2019 Decision:The Conll■ittec cOnsidcred thc casc as pcr the agcnda and notcd that a cOpy Of application was scntto ⅣlSⅣIE on 01 11 2019 fOr cxal■linatiOn Ofthc case HO、vevcr, no colllinentS havc been rcceivcd yct.Hencc,the COmlllittcc decidcd to、 〃ait fOr thc cOlllincnts Case is deferrcd. Party Namc:GENESIS Mcct No/Date:17/80- Status: PACKAGING PVT LTD ALC2/2019 1 18.122019 1 39

Case No。:10/13/80- /ゝIメ32/2019 | IHQ File RLA File 11301:01/80/050/00195/ANI120/ :05/23/040/002791民ゝ/120/ agenda and decided to refer the case to Party Name:GOLD MOHUR McctNo/Dε PROFILES LIMITED ALC2/2019 18.122019 Party Name:GOLD MOHUR McctNo/Date:17/80- Status: DD⌒ EII EO IIヽ イITE n AI´ 引うハ10 Lic.No/Datc:0510412119 Deferred 15.10.2019 ｄ Ｓ ｔ ａ ｔ ｕ ｓ ‥ 　 　 　 ． 』 RLA Filc :04/24/040/00111/AM20/ Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 14.11.2019. However. no comments have been ived yet. Therefore, the Cornmittee decided to remind MSME for expediting the comments. Mcet No/Date:17/80- ALC2/2019 18122019 HQ F‖ e RLA File Lic.No/Dtte:5610005713 Deferred l 132:01/1919,049YO?管M20/ :56/24/040/00019/AM20/ 31102019 132'"ttowtvJwtwvLv Decision: The Comrnittee considered the case as per the agenda and noted that a copy of application was sent to DPIIT for examination of the case on 11.12.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ision: The Comrnittee considered the case as per the agenda and noted that a copy of application was sent to DPIIT for examination of the case on 11.12.2019. However. no comments have been ived yet. Hence, the Committee decided to wait for the comments. ‐ ICase No.:2/15/80¨ ‐ALC2/2019 HQ File :01/80/050/00210/AM20/ ‐Lic.No/Dtte:3 1 10067586 1Deferred 05.11.2019 1 ０ ， : The Committee considered the case as per the agenda and noted that tlre hard copy of ication has not yct been received from RA,Pulleゼ%the f11111.Therefore,the Committee decided request from RA, Pune& the firm to furnish the hard copy of application for examination of the :01/80/050/00196/AⅣ120/ Case is deferred. Case No。:1/15/80‐ ALC2/2019 P額サNamei SHAKTI PUMPS INDIA LINIIITED Party Nalllc:ULTRA ENGINEERS is deferred. 40 ― 一 ― 一 一 ― J ‐Case No.:11/13/80¨ IALC2/2019 Palty Nalllc:GL()VIS INDIA (P)LTD Mcct No/Datc:17/80- ALC2/2019 18122019 lStatus:

Case No。:1/17/80¨ ALC2/2019 1HQ File 101/80/050/00233/ANI120/ Mcet No/Datc:17/80- Status: ALC2/2019 1 18.12.2019 1 RLA Filc Lic No/Datci0510412724 1Defcrred 105/24/040/00513ノAM20/ .29.112019 ‐ Party Name:VICTORA AUTO PVT.LTD Party Namei SULZER IMcet No/Date:17/80- PUMPSINDIA LIMITED ALC2/2019 18.12.2019 134 Decision: The Comrnittee considered the case as per tlre agenda arrd noted that the hard copy ol application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi& the firm to furnish the harcl copy of application for exantination of the case. Case is deferred. RLA Filc Lic.No/Date:0310833126 1Dcferrcd 101/80/050/00234/AM20/ 103/95/040/00827/AM20/ 0212.2019 135‐ becisibi: Tllさё 6hil.ileさ 8。nsidered the case as per thc agcnda and notca lllit tll`llira t86y oF application has not yet bcen rcceivcd from RA,PIumbai Ztt thc flrm.ThercfOre,the Comlllittcc decided to request fl・Om RA,Plumbai&the nrm to fLlrniSh thc hard cOpy of applicatiOn for lcxalllination ofthc casc. ICase is defcrred. ‐Case No.:2/17/80¨ AIJC2/2019 1HQ File Case No。:3/17/80¨ AI」C2/2019 1 HQ Filc ICase No.:4/17/80- ALC2/2019 HQ「ilC 18122019 Lic No/Datc:0910068243‐ Dcferrcd Status: a deficiency letter However, no reply RLA Filc Lic No/Date:0310833143‐ Dcferrcd :01/80/050/002351A}l201 :03l95t040t0o921tAMz)r 02.12.2019 136 De"irion: The Committee considered the case as per the agerrda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Cornmittee decided to request from RA, Mumbai& the firrn to furnish the hard copy of application for Case is delerred. Party Namci SULZER Mcet No/Datc:17/80- Status: PUMPS INDIA LIⅣIITED ALC2/2019 18.122019 Parly Name: AZAD Mcet No/Datc:17/80中 status: ENGINEERING PRIVATE ALC2/2019 LIⅣIITED RLA Filc 137 :01/80/050/002361AM201 :09l24lo4ot0o43\tAM20t 02.r2.20t9 Decision: The Cornmittee considered the case as per the agenda and noted that seeking certain information as raised by DHI was sent to the firm on 10.12.2019. has been received yet. Hence, the committee decided to wait for the firm,s reply. Case is deferred. 41

Case No。:5/17/80- ALC2/2019 HQ Filc ParサNamc:AZAD Mcct No/Date:17/80- lstatus: 18.122019 Lic.No/Date:0910068244 Defcrred 02 122019 ENGINEERING PRIVATE ALC2/2019 LIMITED RLA File :01/80/050/00237//AM20/ :o9/24/040/00439/AM20/ 138 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Hyderabad & the firm. Therefore, the Committee rdecided to request from RA, Hyderabad& the firm to furnish the hard copy of application for ]examination of the case. Case is deferred. ICase No.:6/17/80‐ ALC2/2019 ParヶNamei TRILLIUM Mcct No/Date:17/80- lstatus: FLOW TECHNOLOGIES ALC2/2019 1NDIA PRIVATE LINIIITED 18.12.2019 139 Decision: The Committee considered the case as per the agenda and noted thar the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumhai& the firm to furnish the hard copy of application for Case is deferred. IHQ Filc RLA Filc 101/80/050/00238/AM20/ :o3/95/040/00852/AM20/ ICase No。:9/17/80¨ ALC2/2019 HQ Filc Lic No/Date:03 10833 1 48 1Dcferrcd 02.12.2019 1 ParサNamc:HANINING ‐Mcct No/Dttc:17/80- status: MOTORSINDIA P LTD ALC2/2019 18122019 ParサName:HANNING Mcct No/Date:17/80- status: MOTORSINDIA P LTD ALC2/2019 1 1812.2019 RLA File Lic.No/Datc:3410045677 1Deferred :01/80/050/002411Al/.201 :34t24t04ot0021orAM20t 03.12.2019 140 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Vadodara & the firm. Therefore, the Committee decided to request from RA, Vadodara& the firm to furnish the liard copy of application for ,Case is deferred.

Case No.:10/17/80¨

ALC2/2019 HQ File RLA Filc Lic.No/Datc:3410045679 Defcrred 141 :0118010501002421AM201 :34t24t040t0021IIAMz\t 03.12.201e Decision: The Committee considered the case as per the agenda and rroted that the hard copy of application has not yet been received from RA, Vadodara & the firm. Therefore, the Cornmittee decided to request from RA, Vadodara& the finn to furnish the hard copy of application for 42 ヘ

Casc is defcrred. ‐Case No.:11/17/80- IALC2/2019 HQ Filc Case No。:12/17/80¨ ALC2/2019 HQ Filc ParサName:AZAD Palty Nalnc:DOOWON CLIMATE CONTROL Mcct No/Datc:17/80- status: 18.122019 Lic No/Datc:0910068247 Defcrrcd 04122019 Mcet NO/Datc:17/80- status: ALC2/2019 Mcet No/Datc:17/80- status: 18.12.2019 ‐ Lic No/Date:0910068268 1Deferrcd 06.12.2019 ENGINEERING PRIVATE ALC2/2019 LIMITED RLA Filc :01/80/050/00243/AM20/ :o9/24/040/00437/2へM20/ 142 D""irion: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Hyderabad & the firm. Therefore, the Comrnittee decided to request from RA, Hyderabad& the finn to furnish the hard copy of applicatiol for Case is deferred. 143 INDIA PRIVATE LIMITED 18 12.2019 RLA File Lic.No/Datei2610012887 1Defcrred 04.12.2019 ‐ :01/80/050/00244/AM20/ 126/24/040/00012/Aゝ/120/ Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Visakhapatnam & the finn. Therefore, tlre Committee decided to request from RA, Visakhapatnam& ih" fir,, to furnish the hard copy of application for examination of the case. Case is deferred.

Case No.:13/17/80-

AIノC2/2019 HQ File Paty Namc:KABY PRECISION MACHINING ALC2/2019 PRIVATE LIMITED RLA Filc :01/80/050/00245/AM20/ :o9/24/040/004471ヽM20/ 144 Decision: The committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Ilyderabad & the firm. Therefore, the Committee decided to request from RA, Hyderabad& the firm to furnish the hard copy of application for Case is deferred. 43

Sl.No。461 望三ゆ二221/80‐ALC2万016 M.No.:17/80-ALC272019 dated 18.12.251す 堕整工壼生■翌旦堅)8954 Datc:03.11.2016 SIo No.462 ⅣIanual Cases NAVKAR FITTINGS& FORGINGS PVT.LTD.

Subject: Request for fixation of ad-hoc

1lorill s HQ.No.:01/80/050/00496晨M17 RLA No:03/95/040/00606/AM17 Decision:The COmmttte:=WSidCrcd thc casc as pcr thc agenda nOtcd that the case was rel~~ t the case was raCCtcd in Mceting No. 04/80-ALC2/2017datcd 23.05.2017 due tO nOn― sublllissiOn Of rcply of dciciency lctter ralserl hv DIpp viЯ ρ ITr、 ヽT^1つ/1●′うnl,TO、 Iγ ′0■ 1 1^^′ ^^′ ^^●_ raised by DIPP vide UO No. 1211312017-TSW/g I dated O2l03D0l1 . vr I vPrJ ur ut,r rursrruy rerler However, the firrn had furnished the reply with a request to re-open the case and fix the ad- hoc norms' The committee noted that the firm's repiesentation *u, fo.*urded to MSME on 2g.1 I .201g followed by an ID reminder on 17.09.2019 for expediting the comments. However, no comments have been received yet. Therefore, the committee decided t remind again MSME for expediting the comments. Case is deferred.

Case No.14/15/80-ALC2/2013

Automat Irrigation Pvt. Ltd. Status: D"f".*d M.N堅117/80-ALC2/26玉而扇面T藤万うO19 堕_壼二:0510362949 ditCd 200&2013 HQ.No:01/80/050/00270/AM14

Subject: Request for fixation of a&

hoc norms 墜 No:05/23/040/00199/AM14 淵獣漱判胸藝男需」電″11黒ふ駕評T嘲|「慨蕊繭璃 聯選{蹴皇‖ r井螂k淋評葛俺[礁n揮警雌 dttК d h■c mttng mdぬc COmm燎∝ “ d“ 絆 線 甜 H胎 ∽К b COnsultant σ ∝H)br exalninatiOn ofthc casc as pcr advice ofrcprcscntati、 Casc is deferred. SI.No。463 Casc No.50/2/80-ALC2/2016 S AND W JEWELLERY PRIVATE LIPIIITED Status: M.No■17/80-ALC2/2019 dated 18.12.2019 Lic No.:0710108479 da冨丁面薫万う了汚 HQ.No.:01/80/050/00053/AM17

Subject: Request for re-fixation ofail

hoc norms Defe∬ed RLA No.:05/23/040/00125/AM16 44

Decision: The Committee considered the case as per the agenda noted that the case-ras "pp-r"d t" Meeting No. 05/80 dated 07.06.2016 as per written comments of MSME vide U. O. No.: TSW B 3 I 26 I 2OTL- 1 3 024 I 82 I 20 |6-MMM & A-DCMSME dated ZO .0 5 .20 I 6. However, the firm vide letter dated 26.04.2017 requested for re-fixation of ad-hoc norms. The Committee noted that a deficiency letter seeking information as raised by MSME, i.e. ,rThe complete statement of exports along with copies of shipping bills", was sent to the firm on 30. 11.2018 followed by a reminderon 18.09.2019. However, no reply has been received yet. Therefore, the Committee decided to remind again the firm for furnishing the requisite information. Case is deferred. Sl.No。464 Sl.No。465 Casc No.2/4/80-ALC2/2015 Terumo Penpol Ltd. Status: M.No:17/80-ALC2/2019 dated 18.12.2019 Lic.No:5310008377 dated 28.05.2009 HQ No.:01/80/050/00073/AM16

Subject: Request for fixation ofad-hoc

norms Deferred RLA No.:53/21/040/00002/AM10 Decision:TheCommitteeconsideredthecaSeaSpertheagendaandn date 30.11.2018 in which representative of MSME stated that the norms may be fixed on the blsis of DIPP recommendation vide No. 071912016-TSW dt. 08.12.2017 for License No.5310019514 dt. 05.10.2017 as ratified in Meeting No. l6180 dated 14.11.2017. However, the Committee observed that the description of export item in the subject application does not exactly match with that appearing in the recommendation of DIPP and due to this it was requested to MSME to provide comments. Based on the deliberations & as per advice of MSME, the Committee decided that Consultant (Tech -l) to look into the issue. Hence, the case was referred to Consultant (Tech -l) on 16.10.2019 for examination & comments. Consultant (Tech-l) informed that a similar case of the firm has already been refeffed to PLEXCOUNCIL and Department of c & pc. However.pl,ExcouNcll, vide ernail dated l1-12.2019 has requested for l5 days tirne to reply the query a;d po infornration has been received fronr Deptt. Of C & PC. Therefbre. the Committee clecided to rvait for the reqr-risite information. Clase is def-erred.

Case No.2/10/80-ALC2/2014

Larsen & Toubro Ltd. Status: M No.:17/80-ALC2/2019 dated 18 12 2019 Lic.No:0310781699 datcd 15.05.2014 HQ.No:01/80/050/00198/AM15

Subject: Request for fixation ofad-

hoc norms Deferred RLA No:03/95/040/00038/AⅣl15 Decision:TheCommitteeconsideredthecaSeaSpertheaginda_u Meeting No. 1ll80 dated 30.08.2016 due to non-submission of reply of deficiency lettlr dated 22.02.2016. The COlllinittee nOted that the flrlll's reply against dencierCy letter dated 03.01 2019 was sent 45

to DHI on 18.10.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments. Case is deferred. Sl.No.466 SIo No。467 Sl.No。468

Case No.26/11/80… ALC2/2016

Dee Development Engineers Ltd. Status: M No.:17/80¨ ALC2/2019 dated 18.12.2019 Lic.No:0510398701 dated 01.06.2017 HQ. No. : 0 1 /80/050/00299 I Allll17

Subject: Request for fixation of ad-hoc

nonrrs in respect of Advance Authorization issued to M/s. Dee Development Engineers Ltd., under Para 4.7 of HBP (Vol.-I) - ree. Deferred RLA No:05/23/040/00101/ANI11 7 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 09/80 dated 01 .08.2017 due to non-submission of reply of deficiency letter dated 19.04.2017 . The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firrn on 16.12.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the finn's reply. Case is deferred. Casc No.5/14/80-ALC2/2016 Injectoplast Pvt. Ltd. Status: M.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No.:0610038435 datcd 09.082016 HO.No.:01/80/050/00355/ANI11 7

Subject: Request for re-fixation ofad-hoc

norms Deferred RLA No.:06/24/040/0015/AM17 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 17180 dated 19. 12.2017 as per comments of MSME. However, the firm requested for re-fixation of ad-hoc norms. The Committee noted that the firm's representation was forwarded to MSME on 15.01.2019 followed by reminder on 17.09.2019 & 16.12.2019 for expediting the comments. However, the matter was discussed in the meeting and the Committee decided also to refer the case to Consultant (Tech-l) for examination of the case as per advice of representative of MSME. Case is deferred.

Case No.21/6/80-ALC2/2016

M.No:17/80-ALC2/2019 dated 18.122019 46 Dee Development Ensineers Ltd. Status:

0510398216 dated 13.042016 Sl.No。469 .No:01/80`050/00180/AⅣ〔 17

Subject: Request for fixation of ad-hoi

RLA No.:05/23/040/00015/AM17 Decision: The Committ"" . Meeting No' 09/80 dated 01 .08.2011 due to non-submission of reply of deficiency letter dated 19.04.2017 . However, the firm had furnished the reply with a request to re-open case and fix the ad-hoc norms' The committee reconsidered the case and noted that a deficiency letter seeking certain informatiotl as raised by DPrrr was sent to the finn on 16.12.2019. However, no reply has been received yet' Hence, the committee decided to wait for tl.re firm,s reply. Case is deferred.

Case No. L5/2180-ALC2/2016

Deepeeka Exports Pvt. Ltd. M No:17/80-ALC2/2019 dated 18.122019 … 9396524 dated o4 12.2015 HQ. No.: 0l/80/050/000 I 8/AMt 7 norms RLA No.:05/23/040/00371/AM16 Decision: Th" Com- Meeting No. 14180 dated 11.10.2016 due to non-submission of reply of deficiency letter dated 04.08.2016. The Committee noted that the firm's reply against deficiency letter dated 15.01.2019 was sent to MSME on 21.10-2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. SIo No.470 Casc No.45/24/80… ALC2/2013 Kelvion lndia Pvt.Ltd. Status: M.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No:0310766285 dated 15 01.2014 HQ. No. : 0 1/80/050/005221 Al/.l 4 norms Deferred RLA No:03/94/040/00880/AM14 Decision:TheCommitteeconsideredthecaSeaSp".tll*,g", Meeting No. 22180 dated 20.01.2015 due to non-submisiion of reply of deficiency letter dated 30.01.2014. The firm furnished the reply vide letter dated 20.11.2017 with a request to fix the ad-hoc norrns. The Committee noted that the firm's reply of deficiency letter dated 21.10.2019 has been forwarded to DPIIT on 15.1 1.2019 for examination & comments. Therefore, the Committee decided to wait for the comments. 47

Sl.No。471

Case No.52/15/80-ALC2/2013

Sharma Pharmaceutical Pvt. Ltd. Status: M.No:17/80-ALC2/2019 datcd 18.12.2019 Lic.No.:3410037864 dated ll.09.2013 HQ.No.:01/80/050/00308/ANI114 norms Defemed RLA No.:34/24/040/00131/ANI114 Decision:TheCommitteeconsideredthecaSeaSpertheagendano6 Meeting No. 04/80 dated 13.05.2014 due to non-submission of reply of deficiency letter dated 11.12.2013. The Comrnittee noted that a deficiency letter seeking ceftain information as raised by DpIIT was sent to the firm on 16.07.2019 & subsequent reminder on24.09.2019. However, no reply has been received yet. Therefore, the Committee decided to remind again the firm to furnish ihl requisite information. Case is deferred. Casc No.A/R16/19 TATA Sikorsky Aerospace Ltd. M.No.:17/80-ALC2/2019 dated 18.12.2019 HQ No.: 01/80/162/301/AⅣl18/DES-18 Tube/Pipes 3. Stainless Steel round bars SubieCt: EOU_M/s.TATA SikOrsky Acrospace Ltd.,LOP No PER: 076/EOU/VsEZ/HYD/20H dated 25.07 .2011 for fixation of wastage norms for export product "Helicopter cabin kits & parts and accessories for Aircraft', against import items l. Stainless Steel bars/rods 2. Stainless Steel Deferred Decision: The Committee@ L:^-lt^::Ij"::o:."n.1,0.07.2018 and also to oHt on oi.os.zo18 for their examinations/comments. 鼎猫I静‖鷲灘淵嘔撫鐸鷺力鸞絣 Casc ls deferred. 47 CaSC N0 17/21/80-ALC2/2016 TRF LIⅣIITED Status: 2/201 ~ Lic No.:0210206731 dated o3 06 2016 HQ.No■01/80/050/m

Subject: Request for fixation of ad_hoc

norms Rttected 【 i「Z五万 48

Decision:TheCommitteeconsideredthecaSeaSpertheagendanoteary Meeting No. 16180 dated 14.11.2017 on the ground that there is no manufacturing activity involved. The firm applied for review of the case with personal hearing. The Committee reconsidered the case and noted that the firm was called for personal hearing on25.09.2019,23.10.2019, 15.11.2019 & 18.12.2019 to explain the case before Norms Committee as per advice of DHI. However, nobody appeared for personal hearing on behalf of the firm. Therefore, the committee decided to maintain rejection under intimation to RA, calcutta. Case is Sl.No。474 Sl.No。475

Case No.67/2/80-ALC2/2016

ECOCAT INDIA PVT.LTD Status: M.No:17/80-ALC2/2019 dated 18.12.2019 Lic.No:0510397548 datcd 09.02.2016 HQo No.:01/80/050/00070/AⅣl17 norms Deferred RLA No.:05/23/040/00472/AⅣl16 Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 15/80 dated 06.03.2019 due to non-submission of reply of deficiency letter dated 11.10.2018. However, the firm had requested for fixation of ad-hoc norms. The Committee noted that the firm's representation was forwarded to MSME on 11.07.2019 followed by reminder on24.09.2019, for examination of the case. However, no comments have been received yet. Hence, the Committee decided to remind MSME again for expediting the comments. Case is deferred.

Case No.27/9/80-ALC2/2017

TERUⅣ10 PENPOL PRIVATE LIPIITED Status: NII.No.:17/80‐ ALC2/2019 dated 18.12.2019 Lic.No.:5310019417 datcd 15.06.2017 HO.No.:01/80/050/00205/ANI11 8 norms Defemed RLA No.:53/24/040/00003/AM18 I)ecision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 03/80 dated 09.05.2018 as per written comments of DIPP (TSW section) vide letter No.: 071912016-TSW dated 08.12.2017. However the firm requested to re-fix the norms and also allow them for Personal Hearing. IncontinuationtoMeeting09/80dated l4.09.2019,theComrnitteenotedthatthefirmappearedforPH in its Meeting 09/80 dated 14.09.2019 and explained the reason for higher wastage claimed. Based on the deliberations, the Committee decided that Consultant (Tech 1) to look into the issue. Consultant (Tech-l) pointed out that firm is requesting to increase the wastage norms for PVC compound from 10% to 16Yo on the basis of Deptt. of C&PC suggestion vide letter dated 10.09 .2012 for amendingthe SION H-6'/ and AA of the firm has been ratified on the basis of SION H-67 which allows 49

for only 100%. Consultant (Tech 1) suggested that PLEXCOUNCIL rnay be requested to provide Production/Consumption data of other manufacturers. The Committee noted that the case was referred to PLEXCOUNCIL &Deptt. of C & PC on 18.10.2019 & 05.11.2019 respectively. HoweveT,PLEXCOUNCIL vide email dated 17.12.2019 has requested for l5 days time to reply the query and no information has been received from Deptt. Of C & PC. Therefore, the Committee decided to wait for the requisite information. Case is deferred. SIo No.476 Sl.No.477

Case No.:61/25/80-ALC2/2016

M/s.BARODA EQUIPMENT AND VESSELS PVToLTD. Status: NII.No.: 17/80 dated 18.12.2019 Lic.No./date:3410042545 dated 21.09.2016 HQ No.:01/80/50/621/AM17/DES― I

Subject: Request for reviewing of ad-hoc

norms Deferred RLA No.:34/24/040/00182/ANI11 7 Decision: The Committee considered the case as per the agenda noted that the case was re-lected in Meeting No. 14l80-ALC2l20l7dated 10.10.2017due to non submission of reply of deficiency raised by DPIIT. However, the firm furnished the reply vide letter dated 3 1.07 .2019 with a request to fix the ad- hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 19.11.2019. However, no reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the requisite information. Case is deferred.

Case No.:24/17/80-ALC2/2014

M/s GEA BGR ENERGY SYSTEPI INDIA LIⅣIITED Status: M.No.: 17/80 dated 18.12.2019 Lic No /date:0410159425 dated 16.09.2014 HQ No.:01/80/050/00396/AM15

Subject: Request for fixation of ad-

hoc norms Deferred RLA No:04/24/040/00154/AM15 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 05/80-ALC2l20l6dated 08.06.2015due to non submission of reply to the deficiency (raised by DHI). However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that the case was sent to DHI for examination on 21.08.2019, 18.10.2019 & 17.12.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. 50 ⌒

Sl.No.478 Sl.No.479 Sl.No.480 Casc No.:24/19/80…ALC2/2014 M/s SHAKTI PUPIPS(INDIA)LTD。 Status: M No.:17/80-ALC2/2019 dated 18 12 2019 Lic.No./date:5610004450 Date:21.10.2014 HQ.No:01/80/050/00458/AM15

Subject: Request for re-fixation ofad-

hoc norms Deferred RLA No.:56/24/040/00042/AM15 Decision: The Comlllittcc considered the case as per the agenda nOtcd that thc casc was approved in Mccting No.5/80-ALC2/2016dated 07.06.2016as pcr rccommcndation of DIPP vidc ID Notc No. 12/46/2016-TSW/1l dated 03.06.2016. However, the firm has requested for re-fixation of ad-hoc norms. The Cornmittee reconsidered the case and noted that the case was referred to DPIIT for examination on 24.09.2019,22.10.2019 & 16.12.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. Casc No.:No.:9/12/80-ALC2/2017 M/soSMC PNEUMATICS(INDIA) PRIVATE LINIIITED Status: NII.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No./date:0510403402 dated 14.07.2017 HO.No.:01/80/050/00223/AM18

Subject: Request for re-fixation ofad-

hoc norms Deferred RLA No.:05/24/040/00172/AⅣ【18 Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No.3/80-ALC212016 dated 09.05.2018as per recommendation of DHI, DIPP and MSME present in the meeting. However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per written comments of Consultant (Tech-3):

1. Drawing of all export items with dimensions to calculate actual wastage. Case is deferred.

Case No.:16/8/80‐ ALC2/2018

M/soSMC PNEUMATICS(INDIA) PRIVATE LIMITED Status: M.No.:17/80‐ ALC2/2019 dated 18.12.2019 Lic.No.:0510407130 Date:09.07.2018 HO.No.:01/80/050/139/AM19 Subiect: Request for re-fixation of ad-hoc Deferred 51

^ RLA No.:05/24/040/00207/AM19 norins Decision: The Comlllittec considcred thc casc as per thc agenda notcd that the casc、 vas approvcd in Mceting No 4/80-ALC2/2019 dated 22.05。2018 as pcr writtcn colllments of DPIIT vide U.0.No.:P中 47011/289/2018-TSW datcd 25.042019. Howevcr, thc ftrin has requcsted for re― flxation of ad― hoc norl■s.Thc Committcc rcconsidcrcd the casc and noted that the flrm's reply was scntto Consultant(Tech… 3)on ll・12.2019 for exalllination ofthe casc.Howcver,no comments have bcen reccived yet.Hence,thc Comlllittee decided tO wait forthe comments Case is deferrcd. Sl.No.481 Casc No.28/19/80-ALC2/2014 VOITH IIYDRO PRIVATE LIIⅦITED Status: M.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No.:0510391512 datcd 09.10.2014 HQ.No.:01/80/050/00462/AM15 norms Defemed RLA No.:05/24/040/00277/AM15 D"ci.i"r, The Co**itt"" considered the case as per the agenda noted that the case was rejected in Meeting No. l2l80 dated l2.Og.2\l'7 due to non-submission of reply of deficiency letter dated 04.05.2017. However, the firm vide letter dated 30.05.2019 furnished the reply with a request to fix the ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.12.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm's reply. Case is deferred. Sl.No。 Casc No.41/3/80-ALC2/2015 Y―TEC INDIA PVToLTD。 Status: M.No.:17/80‐ ALC2/2019 dated 18.12.2019 Lic No.:0510393093 dated 05.02.2015 HO.No.:01/80/050/00041/ANI11 6 norms Deferred RLA No.:05/24/040/00523/AM15 meeconsideredtlrecaSeaSpertheagendanotedthatthecasewasrejectedin Meeting No. 18/80 dated 08.12.2015 due to non-submission of reply of deficiency letter dated 22.06.2015. However, the firm vide letter dated20.12.2018 submitted the representation with a request to fix the ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on22.11.2019. However, no reply has been received yet. Therefore, the Committee decided to remind the firm for furnishing the requisite information. Case is deferred. 52

Casc No.14/3/80-ALC2/2017 BGR ENERGY SYSTEⅣIS LIPIITED M.No.:17/80¨ ALC2/2019 dated 18.122019 Lic.No /date:0410162877 dated 09 03 2017 norms HO No.:01/80/050/00014/AM18 RLA No.:04/24/040/00215/AM17 Decision: The Commiffee considered the case as per the agenda noted that the case was rejected in Meeting No. 12l80-ALC2l20l7 dated 12.09.2017 due to non-submission of reply of deficiency raised by DIPP vide U. O. No.: 1213612017-TSW/160 dated 1610512017 . However, the firm furnished the reply with a request to fix the ad-hoc norrns. The Committee considered the case and noted that the case was referred to DPIIT for examination on 29.0'7.2019 followed by reminderson23.09.2019 & 22.10.2019. The complete set of application was again sentto DPIIT on 17 .12.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. M/sL&T¨ PIIIPS TURBINE GENERATORS PRIVATE LIPIITED

Case No.:25/21/80-ALC2/2016

M No.:17/80-ALC2/2019 datcd 18.12.2019 Lic.No /date:0310808650 Date:21.102016 HQ.No.:01/80/050/00485/AM17

Subject: Request for re-fixation ofad-

hoc norms RLA No.:03/95/040/00528/AN〔17 Decision: The Committee considered the case as per the agenda noted that thc casc was approved in Mceting No.11/80-ALC2/2018 dated 06.12.2018 as per DHI written recommendation vide F No. 3/12/2017/TSW(B)dated 18.05.2018. The firm has requested for re-fixation of ad-hoc norrls. The Committee reconsidered the case and noted that the firm's representation was refered to DHI on 24.09.2019 followed by a reminder on 14.11.2019. However, no comments have been received yet. Therefore, the Committee decided to remind again DHI for expediting the comments. Case is deferred. Sl.No.485

Case No.:39/5/80‐ALC2/2017

L&T―DIHPS TURBINE GENERATORS PRIVATE LIPIITED Status: M.No.:17/80-ALC2/2019 dated 18.122019 Lic.No./datc:0310813078 Date:05.052017 HQ.No.:01/80/050/00100/AM18

Subject: Request for re-fixation ofad-

hoc norms Deferred RLA No:03/95/040/01041/AM17 Decision: The Committee considered the case as per the agenda noted that the case was approved in 53

⌒ ated06,03.20l9asperthewrittencommentsofDHIvidetheirU.o. No.DES―1/L&T′「u-1-2018-HEI dated 24.122018. However,the flrm has rcquestcd for rc― flxation of ad― hoc norms.Thc(3omlllittcc reconsidercd the case and notcd that the flrm's representation was referrcd to DIII on 17.12 2019 Howcver, no comments havc becn receivcd yet.Hcnce,thc(3omlllittee dccided to wait for thc commcnts. Case is deferred. 。No.486 Casc No.:7/11/80-ALC2/2015 L&T― PIIIIPS TURBINE GENERATORS PRIVATE LIⅣlITED Status: _M.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No /date:0310796416 Date:04.06.2015 HQ. No. : 0 I /80/050/0 021 4l A}ll 6l

Subject: Request for re-fixation ofad-hoc

norms Deferred RLA No.:03/95/040/00086/AM16 e agenda and noted that the case was approved in Meeting No. 9/80-ALC2l20l6 dated 02.08 .2016 as per the written comments of DHI vide U. O. No.: 3 (17 4)115-TSW (B) dated 19,07 .2016. However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that the firm's representation was referred to DHI on 17.12.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. L&T― PIIIPS TURBINE GENERATORS PRIVATE LIⅣIITED

Case No:13/16/80-ALC2/2017

M No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No./datc:0310815484 Datc:01.09.2017 norms HQ.No.:01/80/050/00276/ANI11 8 RLA No.:03/95/040/00052/AM18 e agenda and noted that the case was rejected in Meeting No. 06/80-ALC2l20l8dated 11.07.2018 on the ground that the parts of the import items given ( Unit of Measurement) in sets and number of parts in each set and their composition is not known. ihe Committee found that it was very difficult to enforce accountability and rejected the case. However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that firm's representation was referred to DHI on 09.10.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind again DHI for expediting the comments. Case is deferred. Sl.No。488 Astha Corporation Pvt. Ltd. 54 ¬ Status: M No: 17/80 dated 18.12.2019

ヘ HQ Filc No: 01/80/162/003/AM20/DESl Decision: The Cornminee considered the case as per agenda and Itoted that the representation received from O/o Development Commissioner Vishakhapatnam Special Economic Zone, Hyderabad has forwarded the application of M/s Astha corporation Pvt. Ltd., for 100% EOU for fixation of Nonns for Precision Metal Machined Parts. The firm had requested for fixation of norms. The Cornmittee noted that the case was referred to MSME for examination on 27.08.2019 followed by reminder on 08.11.2019. However, no comments have been received yet. Therefore, the Committee decided to remind again MSME for expediting the comments. Case is deferred. Slo No。489

Case No.:4/5/80-ALC2/2017

M No.: 17/80 dated 18 12 2019 ⅣIICRON INSTRUⅣIENTS PVTo LTD. Status: L No:0510402041 datcd 23 03 2017 HQ Filc No:01/80/050/00065/AM18/ RLA Filc No:05/24/040/00643/AM17/

Subject: Request for 100% EOU for fixation of Norms

for Precision Metal Machined Parts Deferred

Subject: Request for revision of ad-hoc norms , Rejected

Decision: The Committee considered the case as per the agenda noted that the case was approved in meeting No. l4180 dated 10. 10.2017 as per the recommendation of the representation of DIPP letter no. 121712011-TSW162 datedl0.10.20l7. l The firm vide their letter dated 24.06.2019 has requested to revise the norms as per actual recovery and allow import quantity as 3987 kgs instead of 2791.8 kgs. The Committee reconsidered the. case and observed the written comments given by DPIIT vide U. O. No. P-47011185/2019-TSW datedr 25.11.2019 wherein DPIIT stated that sale price of copper scrap is 49.90 of CIF value of import, item. as per scrap invoice & earlier norms were ratified after taking 50o% recovery from tlte scrap. Hence. the ratified norms cannot be revised. Therefore, the Cornmittee decided not to revise the ratified norms and rejected the firm's request.The norms as fixed earlier shall apply. Sl.No.490

Case No.:21/5/80-ALC2/2018

M.No: 17/80 dated 18 12 2019 Liccncc No.:0510406253 dated 27 04.2018 HQ Filc No:01/80/050/00070/AM19/ RLA Filc No:05/24/040/00040/AM19/ IDecision:Thc(3ommittee considered the case as perthe agenda and notcd that lmeeting No.01/80 datcd 03.04.2019 on the reconllllendation of DPIIT 47011/381/2018¨ TSW datcd 18.02.2019. ⅣIICRON INSTRUⅣIENTS PVT LTD I Status: …

Subject: Request for revision of ad-hoc norms Deferred

the case was approved vide their U. No. P 一 ｎ 　 ¨ The firm vide letter dated 12.01.2019 has requested to revise the norms on repeat basis as 55 Case is rejected.

approved for AA No.0510405087 dated 26.12.2017 irr rneeting No. l9/80 dated 28.02.2018. The Committee reconsidered the case and observed that DPIIT vide U. O. No. P-47011185/2019-TSW dated 25.11.2019 has agreed to the request of the firm'in line with earlier cases'. The Committee decided to have more information frorn DPIIT regarding specific details of the earlier cases on the basis of which tlie revision is being recommended and reason to allow different wastage earlier. Case is deferred. Sl.No.491

Case No.:16/12/80¨ ALC2/2018

M No: 17/80 datcd 18 12.2019 Liccncc No:0510408225 Datc:25 102018 HQ Filc No:O1/80/050/00289/AM19/ RLA File No:05/24/040/00398/AM19/ plIICRON INSTRUⅣIENTS PVT.LTD。 I Status: Decision:The ComⅡlittee considered the casc as per thc agcnda and notcd that thc casc、vas approvcd ill mccting No. 14/80 datcd 20 02 2019 as pcr 、vrittcn commcnts of DPIIT vidc tllcir F. No.: P― 47011/17/2019/TSW datcd 08 02 2019. The firm vide their letter dated 12.07.2019 has requested to revise the norms on repeat basis as approved for AANo.0510405087 dated26.12.2017 in meeting l9180 dated 18.02.2018. The Committee reconsidered the case and observed that DPIIT vide U. O. No. P-47011i85l2019-TSW dated 25.11.2019 has agreed to the request of the firm'in line with earlier cases'. The Cornmittee decided to have more information from DPIIT regarding specific details of the earlier cases on the basis of which the revision is being recommended and reason to allow different wastage earlier. Case is deferred.

Subject: Request for revision of ad-hoc norms Deferred

Subject: Request for revision of ad-hoc norms Deferred

Sl.No.492 Case Nulllber:20/5/80-AIメΞ2/2018 M Noi 17/80 dated 18 12 2019 Liccncc No:0510406252 Datc:2704.2018 HQ Fitt No:01/80/050/00069/AM19/ RLA File No:05/24/040/00042/AⅣf19/ ⅣIICRON INSTRUⅣIENTS PVT LTD
‐ Status: Decision: The Committee considered the case as per the agenda and noted that the case was approved ir-r M. No. l/80 dated 03.04.2019 on the recommendation of DPIIT vide their U.O. No. P -41011131912018- TSW dated 20.02.2019. The firm vide their letter dated 15.07.2019 has requested to revise the norms on repeat basis as approved for AA No. 0510398272 dated 22.04.2016 in meeting No. l9l80 dated 18.02.2018. The Committee reconsidered the case and observed that DPIIT vide U. O. No. P-47011185/2019-TSW dated 25.11.2019 has agreed to the request of the firm 'in line with earlier cases'. The Committee decided to have more information from DPIIT regarding specific details of the earlier cases on the basis of which the revision is being recommended and reasor.l to allow different wastage earlier. Case is deferred. 56

RLA Filc No:04/24/040/00188/AⅣl13/ ‐ RI鵠1:1忠嗅需雰 :『胞犠庶縄‖肥縮Ъ紫:l : nnlntr HEA\ry ELECTRICALS LIMITED

Subject: Request for revision of ad-hoc norms Deferred

nOtcd that the caseヽVas approvcd in 3(23)/13-TSW(B)/89 datcd 6 5.2013 BHARAT HEAVY ELECTRICALS status : LIⅣIITED br rcvlslon of ad― hoc norms lDcferred and noted that thc casc、vas approved in‐ 3(23)/13-TSW(B)/89 datcd 6.5.2013. ‐ Ｓ ｔ ａ ｔ ｕ ｓ ‥ ‐ 一 一 一 一 NI No.: 17/80 datcd 18.12.2019 Licenc8 Nol:041911118,pttel l?l?12012 早9F'1,W9:91/§ 949,ppq'7'/今Vl'/ However, the firm vide letter dated I 1.10.2019 requested for revision of ad-hoc norms' The firm stated that they have not requested DGFT to amend the UOM as No for the items which have UOM as ,.sET". Based on their requirement, they have only provided the break up details' The firm has further stated that the quantity of material they have imported in terms of "No" is same as that they have declared to DGFT earlier. Now they have requested to revise the Unit of Measurement (UoM)' The committee reconsidered the case and noted that the firm's representation was referred to DHI on 2l.l1.2O1g.However, no comments have been received yet. Therefore, the Committee decided to remind DHIfor expediting the comments. Casc is deたrrcd. SIo No。494 Case Number:46/24/80-ALC2/2012 M.No.: 17/80 dated 18.12.2019 Licencc No.:0410112044 dated.02032011 早Q FllCヽ9:91イ:Qイ0'9/99§ l?/^M10/ SubieCt:Rcqucst RA.F No.04/24/040/00290/AⅣl10 Decision: The Committee considered the case as per the agenda Meeting No.07/80 dated 25.06.2013 as per written of DHI UO No' The firm vide letter dated 17.10.2019 requested for revision of ad-hoc norms. The firm stated that they have not requested DGFT to amend the UOM as No for the items which have UOM as "SET"' Based on their requirement, they have only provided the break up details. The finn has further stated that the qua,tity of material they have lmport"a in terms of "NO" is same as that they have declared to DGFT earlier. Now, they have requested to revise Unit of Measurement (UoM). The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per written comments of DPITT vide U. O. No.: P-47011139012018-TSw dated23.12.2019: I . Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the expori product may be indicated. Net weight along with details of other imported input to be used in tiie resultant product and sought to be imported/procured from sources other tl-ran the 57

license, if any, may ilso be indicated. Case is deferred. 。495 Casc No.:43/23/80… ALC2/2016 MINCO TECH(INDIA)PRIVATE LIPIITED Status: M No.:17/80-ALC2/2019 datcd 18 12.2019 Lic No./datei 0210207219 Date:21.12.2016 HQ.No:01/80/050/00546/AⅣl17 norms Deferred RLA No.:02/24/040/00187/AM17 enda and noted that the case was rejected in Meeting No. 9/80-ALC2l20l7 dated 01 .08.2017 due to non-submission of reply of deficiency letter dated22.03.2017 raised by DIPP. However, the firm vide letter dated 30.09.2019 has furnished the reply of deficiency letter and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. No。496 Casc No.:53/2/80-ALC2/2016 ALSTOplEINDIA LIPIITED Status: M.No.:17/80-ALC2/2019 dated 18.122019 Lic.No /datc:0310795652 Date:30.042015 HQ.No:01/80/050/00056/AM17/ norms Deferred RLA No:03/94/040/00060/AM16/ Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 20l80-ALCZt20l6 dated 03.01 .201'1 due to non-submission of reply of deficiency letter dated24.10.2016 raised by DHI. However, the firm vide letter dated 28.09.2019 has furnished the reply of deficiency letter and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DHI for examination & comments. Case is deferred. No。

Case No.:58/12/80-ALC2/2014

GEA ECOFLEX INDIA PVT.LTD。 Status: Ⅳl.No:17/80-ALC2/2019 dated 18.12.2019 Lic.No./datei 3110064489 Date:27.06.2014 HQ.No:01/80/050/00307/AM15/ Subiect: Request for fixation ofad-hoc Deferred 58

RLA No:31/83/040/00082/AM15 norlll s De"isio": The Cod onsidered the case as per the agenda and noted that the case was rejected in Meeting No. 3/80-ALC2l20l5 dated 12.05.2015 due to non-submission of reply of deficiency letter dated 07 .10.2014. However, the firrn vide letter dated 02.11.2019 has furnished the reply and requested for fixation of ad- hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. GEA ECOFLEX INDIA PVToLTD.

Case No:10/8/80‐ ALC2/2015

M No.:17/80¨ ALC2/2019 dated 18.12.2019 Lic,No./date:0310795103 Date:0604.2015 Sutrject: Request for fixation of ad-l-roc norms HQ. No.: 0 l/80/050/001 I 6/AM1 6 RLA No:03/94/040/01169/AM15 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 20l80-ALC2l20l5 dated 05.01.2016 due to non-submission of reply of deficiency letter dated22.09.2015 raised by DIPP. However, the firm vide letter dated 02.11.2019 has furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. GEA ECOFLEX INDIA PVToLTD.

Case No.:39/22/80-ALC2/2014

M.No:17/80-ALC2/2019 dated 18.12.2019 Lic.No./datc:0310789333 Datc: 17.092014 norms HQ. No. : 0 1 /80/050/00520 I A}l4l 5 I RLA No:03/94/040/00580/AM15/ Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. l0/80-ALC2l20l5 dated 17.08.2015 due to non-submission of reply of deficiency letter dated 20.03.2015 raised by DIPP. However, the firm vide letter dated 02.11.2019 has furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. GEA ECOFLEX INDIA PVT.LTD.

Case No:20/19/80-ALC2/2014

M.No.:17/80-ALC2/2019 dated 18.12.2019 59

Lic.No /date:0310788788 Datc:0509.2014 HQ.No.:01/80/050/00454/AM15 norms Deferred RLA No.:03/94/040/00415/AM15 ne"ision: fhe Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 4/80-ALC2l20l5 dated 26.05.2015 due to non-submission of reply of deficiency letter dated 09.02.2015 raised by DIPP. However, the firm vide letter dated 02.11.2019 has furnished the reply and requested for fixation of ad-hoc nonrrs. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & commeuts. Case is deferred.

Case No.:284/15/80-ALC2/2018

PIICRON INSTRUⅣIENTS PVTo LTD。 Status: M No:17/80-ALC2/2019 dated 18.12.2019 Ｌ Ｌ c No /datc:0510409150 Datc:02012019 c.No /date:0510409703 Date:2002.2019 F No 01/80/050/00626/AM19/DES― I F No.01/80/050/00674/AM19/DES-1

Subject: Request for re-fixation ofad-hoc

norfils Deferred RLA F.No.05/24/040/00548/AM19 RLA F.No.05/24/040/00669/AM19 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 3i80-ALCZl20l9 dated 08.05.2019 as per written comments of DPIIT vide their U. O. No.: P-4101118512019-TSW dated 02.05.2019 and as per written comments of DPIIT vide tlieir F. No. P- 41 01 1 I 17120 19-TSW dated 1 6.04.2019. However, the firm vide letter dated 15.01.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. No.502

Case No.:32/9/80-ALC2/2017

UNDERCARRIAGE AND TRACTOR PARTS PVT.LTD。 Status: M.No.:17/80-ALC2/2019 dtted 18.12.2019 Lic.No./date:0310813834 Date:07.06.2017 |

Subject: Request for re-fixation of ad-

hoc norrns Approved Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 15/80-ALC2l20l7 dated 24.10.2017 on repeat basis as per AA No. 0310781233 dated 09.05.2014 ratified in NC meeting No. 19i80 dated 0911212014 as recommended by the DIPP vide their ID. No12/7312017-TSW/I l5 dated 23.10.2011. However, the firm vide letter dated 25.01.2019 has requested to amend part number of export item to be read as 32402 numbers for part number 422-5504142215505 instead of 32402 numbers for part number 422-504/422/505 The Committee reconsidered tl-re case and decided to amend the description of 60

thc expo■itelll to be read as 32402 numbers for part number 422… 5504/422/5505 instcad of 32402 numbers for part number 422-504/422/505 as per advice ofⅣ ISPIE. RA concerned maY take further action as per the decision of NC. 503

Case No.:4/8/80-ALC2/2018

CHIRAG UDYOG Status: M.No.:17/80-ALC2/2019 dated 18.12.2019 Lic.No./datci 0510406909]Date:19.06.2018 HQ.No.:01/80/050/00127/AM19

Subject: Request for re-fixation of ad-hoc

norms Deferred RLA No:05/23/040/00141/ANI119/ heagendaandnotedthatthecaSewaSapprovedin Meeting No. lg/gg-A1;c2lz}lg dated 11.09.2019 on the basis of inputs given by the Technical Authorities present in the meeting. However, the firm vide letter dated 21.10.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to MSME for examination & comments. Case is deferred. ⅣIASU BRAKE PADS PRIVATE LIPIITED Casc No.:67/11/80-ALC2/2018 M No.:17/80-ALC2/2019 dated 18.12.2019 Lic,No./date:0510408083 Datel ll.10.2018 norms No.:01/80/050/00258/AM19 RLA No.:05/24/040/00394/AM19 Decision:The Committce considercd the case as per thc agcnda and notcd that the case was raccted in Meeting No. 7/80-ALCZl20lg dated 17.07.2019 due to non-submission of reply of deficiency letter dated 26.03.2019 raised by Consultant (Tech-l)' However, the firm vide letter dated 10.09.2019 has furnished the reply and requested for fixation of ad- hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to Consultant (Tech-1) for examination & comments. Case is deferred. No.505 Casc No.:11/11/80-ALC2/2018 35/1/80-ALC2/2019 ISGEC ⅡITACHI ZOSEN LIⅣIITED Status: M No.:17/80-ALC2/2019 dated 18 12.2019 Lic.No /date:0510407480 Date:0808.2018 61

0510409835 Date:05.03.2019 HQ.No.:01/80/050/00202/AM19/ 01/80/050/00783/ANI119 Subiect: Request for re-fixation ofad-hoc norms Deferred RLA No.:05/23/040/00216/AM19/ 05/23/040/00526/ANI11 9 n""i.["'tt,"agendaandnotedthatthecaSewaSapprovedin Meeting No. 3/80-ALC2lZ0lg dated 08.05.2019 as per written comments of DPIIT vide U. O. No.: P- 41 0 I 1 I 84 1201 9-TSW dated 24.04.20 19 . The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 7/80-ALC2lZ0lg dated 17.07.2019 as per written comments of DPIIT vide U.O. No.: P- 47 0t | 1981201 9-TSW dated 27 .06 .2019 - However, the firm vide letters dated 14.08.2019 &20.09.2019 has requested for re-fixation of ad-hoc luorms. The Committee reconsidered the case and decided to forward the finn's representation to DPIIT for examination & comments. Case is deferred. ⅣIICRON INSTRUⅣlENTS PVT LTD

Case No:13/11/80‐ ALC2/2018

9/3/80-ALC2/2018 M No.:17/80-ALC2/2019 datcd 18.12.2019 Lic.No./date:0510407381 Datc:31.07.2018 0510405742 Date1 28.02.2018

Subject: Request for re-fixation of ad-hoc

norms HQ.No.:01/80/050/00204/ANI11 9 01/80/050/00009/AM19 RLA No.:05/24/040/00265/AM19 05/24/040/00599/AM18 rtheagendaandnotedthatthecaSewaSapprovedin Ⅳlccting No.3/80-ALC2/2019 dated 08.05.2019 as pcr writtcn comments of DPIIT vidc F No:P― 47011/85/2019¨ TSW dated 18.04.2019. The(3onllllittec considered the casc as pcr thc agenda and notcd that the casc、 vas approved inゝ/1ceting No 3/80‐ ALC2/2019 datcd 08.052019 as per writtcn commcnts of DPⅡ T vide Fo No.: P― 47011/85/2019-TSヽV datcd 16.04.2019. Ho、vcvcr,thc flrlll vide lctters datcd 1 5.07.2019 has requcsted for re― flxation of ad― hoc norms. The Colllinittce reconsidered thc casc and dccided to forward the flrln's representation to DPIIT for exalnination gc comments. Case is deferred. No.507 Casc No.:331/15/80-ALC2/2018 MIICRON INSTRUⅣIENTS PVT LTD Status: ⅣI.No:17/80-ALC2/2019 dtted 18.122019 Lic.No./dtte:0510409696]Date:20.02.2019 Ho.No.:01/80/050/00673/ANl19 Subiect: Request for re-fixation of ad-hoc Deferred 62

RLA No.:05/24/040/00668/AⅣl19 1lorin s Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 3/80-ALC2l20l9 dated 08.05.2019 as per written comments of DPIIT vide their F. No.: P- 41 01 | I 17120 I 9-TSW dated 1 6.04.2019. However, the firm vide letter dated 06.06.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. SIo No。508 Casc No.:25/8/80‐ALC2/2017 Status: M.No.:17/80-ALC2/2019 dated 18 12.2019 ⅣIICRON INSTRUⅣIENTS PVT LTD Lic.No./date:0510402472 Date:05.05.2017 HQ. No.: 01/80/050/00169/AM1 8

Subject: Request for re-fixation of ad-hoc

norms Deferred RLA No:05/24/040/00056/AM18 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 14l80-ALC2l20l7 dated 10.10.2017 on the recommendation of DIPP letter no. 1217112011- TSW/8 I datedl 0. 10.201 7. However, the firm vide letter dated24.06.2019 has requested for re-fixation of ad-hoc norms. The Cornmittee reconsidered the case and decided to forward the firm's representation to DPIIT for examination & comments. Case is deferred. No.509 Casc No:14/11/80… ALC2/2018 Status: M.No.:17/80-ALC2/2019 dated 18.12.2019 ⅣIICRON INSTRUⅣIENTS PVT LTD Lic No /date:0510407383 Date:31.07.2018 HO.No.:01/80/050/00205/AM19

Subject: Request for re-fixation ofad-hoc

norms Deferred RLA No.:05/24/040/00263/AM19 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 1/80-ALC2l20l9 dated 03.04.2019 on the recommendation of DPIIT vide their letter No. P -41 0l 1 I 17 12019-TSW dated 20.02.2019. However, the firm vide letter dated 15.07.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to forward the firm's representation to DPIIT for exarnination & comments. Case is deferred.

---

63

TERUMO PENPOLPV丁.LttD. LIC.NO.5310016701 Dt.14.05.2013 Taking cue from SI(〕N atS.NO H-67 NC l Licence maY be ratified as under S. No of imPort in the lic. 1.10 Ke/kg content in qgq! Net+ 2% wa 面 ~sq:品 eter/sq.meter cOntentin expOrt

千 一 （ 、 AA 0710109710 dated 26.04.16 Sno 1 lmport Raw Materials / Components (xi) :mport a‖owed (kg/■) AI Plate-1"(25.4mm)THK AMS4050(7050‐ 丁7451) 182 2 AI P!ate-2.25"(57.2mm)丁HK AMS4050(7050-T7451) 1233 3 AI Plate2.5"(63.5mm)TK BMS7-323(7050-T7451) 257 4 AI Plate2.75"(69.85mmlTK AMS4050(7050‐ T7451) 169 5 AI Plate 3‖ (76.2mm)TK BMS7-323(7050-丁7451) 647 6 AI Plate 2.5‖ (63.5mm)THK AMS4050(7050-丁7451) 145 7 AI Piate l.75"(44.45MM)TK 7050-T7451(AMS 4050) 79 8 AI Plate 2"{50.8mm)TK 7050-T7451(AMS 4050) 92.2 9 121mm THK AL PLT 7050-T7451(BMS7‐ 323) 1596 10 AI Plate‐ o.25"(6.35mm)TK 7075-丁7351 BARE AMS― QQ―A 250/12 0.42 11 ALSHT-0.04"‐(1.016MM)AMS―QQ―A-250/127075¨T6 1 12 AL SHT-0.025"(0.635mm)TK CLAD 7075-T6(AMS― QQ‐ A― 250/13) 9.5 13 AL SHT-0.032"(0,81MM)THK AMS― QQ―A-250/127075- T6BARE 6 -1 0`∫ ″ 禦 .

14 ALSHT-0.032"Thk CLAD 7075‐ 丁6{AMS― QQ―A‐250/13) 3.3 15 AI Sheet-0.o4"(1.016MM)AMS― QQ‐A-250/137075‐T6 4 16 AL SH丁-0.1‖ (2.54mm)丁k7075-丁76(AMS― QQ―A-250/25) CLAD SH丁 5.1 17 Al-7075-0-1.016 mm BARE′ AMS¨QQ―A-250/12 7 18 AL SH丁―.05"Thk CLAD′ 7075‐ T6{AMS―QQ‐A-250/13) 8.7 19 AI-7075-0‐ 1.016 mm CLAD′ AMS¨QQ‐A-250/13 1.1 20 ALSHT-0.032‖ (0.81mm}丁HK′ CLAD SHT 2024-T3 1.8 21 ALSHT-0.05"(1.27mm)Tk′ AMS―QQ‐A-250/52024-T3 0.4 22 A卜2024-0-1.016 mm CLAD′ AMS¨QQ― A‐250/5 1.8 23 AI-2024-0-0.8128 mm CLAD′ AMS―QQ―A-250/5 21 24 丁=1/2HD O.032"{0.81mm)tk S.S SHEET― AMS 5518- G=301 0.3 25 0.025"{0.635mm)Thk′ S.S SHEET― AMS 5516-G=302 0.3 26 A卜2024-0‐ 0.05"{1.27mm)′ CLAD AMS‐ QQ‐A-250/5 16 27 Alsheet 7075 T76 Clad′ (AMS4316)0.8128 MM Thick 17 28 AL SHT-0.16"(4.064mm)丁 K′ CLAD 7075-丁6(AMS― QQ― A― 250/13) 9 ~λ `ゞ ~ 奪

29 I I AL SHT 0.125"(3.175)TK, BARE 7O75_T6(AMS_QQ_Q_ I 'sohz) I atcoa 4922s /TIERNAv 6o-467s, 7075_T65 1 1, A Ms_ee_ I o -2oo/t1. r_l I ANDlo13g-L4oL, 7o7s_T6s7l, AMs_ec , , u/5_ tbs11, AMS_QQ_A_2O0/1,1. I AN D 10134- 1003, 7 07 5_T65 1 1, AMS_QQ_A_ 2OO I t7 I AND10135-roor,, !-A-2OO/1.7 I 1.8 30 2 31 1.2 32 4.2 33 2 つ ０ 3.5 35 AND10136‐ 2006′ 7075-T6511,AMS― QQ―A-200/11 AND10137-10o5′ 2024-丁4′ AMS―QQ―A-200/3 3.6 36 4 ３ ７ 一 　 　 ３ ８ BAC1503-100131′ 7075-T6511′ AMS―QQ‐A-200/11 3.2 BAC1503‐10o133′ 7075-T6511′ AMS―QQ―A-200/11 4.3 39 BAC1503-100339′ 7075-T73511′ AMS‐QQ‐ A‐200/11 BAC1503-1420′ 7075-T6511′ AMS―QQ―A-200/11 4.7 40 10 41 BAC1503-1420′ 7075‐ T6′ AMS‐QQ‐ A‐200/11 18 ４ ２ 一 　 　 ４ ３ AL ALLOY QQ― A…200/117075‐T01503‐ 1430 4 BAC1504‐8245,7075-0′ AMS―QQ―A-200/11 BAC1517-1521′ 7075‐ 0′ AMS‐QQ―A-200/11 80 44 45 100 BAC1517-1523′ 7075‐ 0′ AMS―QQ―A-200/11 MS20001H6 135 46 17 -3イ ゞ― ク ・

47 48 MS20001-PX4-400 3 MS20001-PX4-500 2 49 MS20001-PY12-188 0.4 50 MS20001‐PY4-400 3 51 MS20001-PY4‐500 2 52 TI[RNAY 60-16966′ 7075-T73511′ AMS‐QQ―A-20o/11 2.3 53 丁IERNAY 60-305′ 7075-丁6′ AMS―QQ―A…200/11 2 54 T!ERNAY 60-3233′ 7075-T6′ AMS¨QQ‐A-200/11 2 55 TI[RNAY 60-8009′ 7075-0′ AMS―QQ― A…200/11 31 56 VS20101-1‐ 2 1.8 57 VS20101-2-2 0.12 58 VS90407 0.16 59 AI Forging make from l14S6805-F3 11. nos 60 MAKE FROM l14S6803F2′ AMSS5000{4340-N&T) 2 nos 61 Phenolic MIL― |…24768/16 2 nos 62 50.8 MM diameter AMS6346/4130′ ALT― AMS6414/4340 2.05 63 38.l mm diameter 15-5PH/AMS5659 CRES 0.9 64 63.5 mm diameter AMS6414/4340′ ALT―AMS― S― 5000/4340 3.9 65 50.8 MM diameter AMS6371/4130 0.4 66 25.4 mm diameter AMS6414/4340 0.4 67 44.45 mm diameter AMS6414/4340 1.3 ~竹 `ゞ 1くぅ鼻 ● 1

Steel rod 44.45 mm diameterAMS 5643-CRES 17-4PH 3.1 69 Steel rod 19,05 MM tThickness′ AMS 6346-4130 SttEEL Heat treated 1.6 256 MS20001PH9-5100 136 257 VS20106-1 280 258 MS20001PX9-4900′ 2024‐T3511 136 259 BAC1503-15137075-T6AMS―QQ―A-200/1l BARE AL ALLOY EXTRU 58 260 Ext.AMS‐ QQ―A-200/11/7075(BAC-1514‐ 1648)丁6511 35 261 Extrusion AMS‐QQ‐A-200/11(VS90328)T6 16 262 AMS―QQ―A-200/11(BAC1510-1417)AL EXT 128 263 Extrusion AMS― QQ―A-200/8(BAC1520-2804)T6511 3.2 264 BAC1520-28057075-T73511′ AMS―QQ―A-200/1l AL ALLOY 2.4 ムJ¬″ 口 % ルジ″ケ″′。~ 行 ^44J7 争 i rr$s, 3たヶ

′ ⌒ AA 0710109871 dated 26.05.16 Sno lmport Raw material / components used for manufacturing lmportallowed tx{l*t 1 Aluminium Plate 12.7 mm thick 7050¨ 丁7451 (AMS 4050) 58990 2 Alumin:um plate 19.o5mm thick 7050‐ T7451(AMS 4050) 91800 3 Aluminium plate 25 4 mm thick 7050‐ 丁7451 (AMS 4050) 3523.25 4 Aluminium Plate 31.75 mm thick 7050¨ T7451(AMS 4050) 704395 5 Aluminium plate 38 1 mm thick 7050‐ T7451 (AMS 4050) 5518.20 6 Aluminium p!ate 44.45 mm thick 7050‐ T7451(AMS 4050) 7674.65 7 Aluminium plate 50.8 mm thick 7050-T7451 (AMS 4050) 653905 8 Aluminium plate 57 15 mm thick 7050‐ T7451(AMS 4050) 655860 9 Aluminium plate 63.5 mm thick 7050-T7451 (AMS 4050) 4108.90 10 Aluminium p!ate 69.85 mm thick 7050- T7451(BMS7-323 Type l) 612.85 Aluminium plate 76.2 mm thick 7050‐ T7451 __ (BMS7‐323丁ype!) 5458.70 12 A!uminium Plate 31 75 mm thick‐ 7075- T7351(AMS―QQ‐A‐250ノ12) 27.20 13 Aluminium Plate 38.l mm thick-7075-T651 ___ (AMS¨ QQ‐A-250ノ12) 18700 14 A:uminium Plate 50.8 mm thick_7075¨ __ェp51 1AMS‐ QQ‐A‐250/12) 80.75 15 Aluminlum sheet l.27 mm thick 2024‐ T3 BARE(AMS―QQ―A‐250/4) 67.27 16 Steei sheet 2.032 mm Thick AMS 5513 56.22 一|も多″ イグ .

^ ⌒ ⌒ 17 Aluminium sheet l.6 mm thick 2024丁3 BARE(AMS―QQ‐A-250/4) 32.29 18 Alumlnium sheet l.8mm ttHICK 2024‐ T3 AMS‐QQ―A‐250/4 40523 19 Aluminium sheet l.27MM ttHiCK 6061-丁 4 AMS‐QQ‐A-250/11 8005 20 Aluminium sheet l.6 mm th:ck 6061丁4 コ RE(AMS‐QQ―A…250ノ11) 10086 21 Aluminium sheet l.6 mm thick 7075 T6 BARE(AMS‐QQ‐A‐250ノ12) 12247 22 Aluminium sheet O.8 mm thick 6061‐ T4 BARE(AMS‐QQ―A‐250/11) 3602 23 Aluminium sheet 2.032 mm Thick 7075‐ T6 BARE(AMS―QQ―A‐250ノ12) 30193 24 A:uminium sheet 3.175 mm TH!CK 2024-丁3 BARE AMS‐QQ‐A‐250/4 84.09 25 26 Aluminium sheet 2.286mm THICK 6061‐ TO BARE AMS‐QQ―A‐250/11 1013 Aluminium sheet l.27MM TH!CK 7075 T6 AMS‐QQ―A‐250ノ12 421 27 Aluminium sheet 2.032 mm ttH!CK 7075‐ TO BARE AMS‐QQ―A-250ノ12 5489 28 Aluminium sheet 2 286 mm ttHICK 7075‐ TO BARE AMS―QQ―A-250ノ12 10293 29 Aluminium sheet 1 6002 mm ttHICK 7075‐ TO Bare AMS¨ QQ―A-250/12 7204 30 Aluminium sheet 2 032mm THICK 2024‐ TO BARE AMS‐QQ―A…250/4 26 31 Aluminium sheet l.8034 mm THiCK 7075‐ TO Bare AMS― QQ‐A‐250/12 23.00 32 Aluminium sheet l.6mm TH!CK 6061‐ T6 Bare AMS― QQ‐A‐ 250ノ11 2000 33 Steel Bar19 05 mm Dia,SOLU丁10N TREATED,15‐ 5PH 5600 34 へluminiunl extrusion AND1 01 33-1001-7075- T6511 28.00 35 Aluminium extrusion AND10133‐ 1202-7075¨ 丁73511 68.00 Sno 87 net to net Avg weight of export product is 95 kgs l* *., Q,a/ q ク ―>イン´

Sno lmport Raw material/ components used for manufacturing :mport ai:owed (kgノft) Aluminium Plate 1 2.7 mm thick 7050- T7451(AMS 4050) 969.00 2 Aluminium plate 1 9.05 mm thick 7050 T7451 1AMS 4050) 1507.90 3 Aluminium plate 25.4 mm thick 7050- T7451 1AMS 4050) 5788.50 4 Aluminium Plate 31.75 mm thick 7050 T7451 1AMS 4050) 11571.90 5 Aluminium plate 38.l mm thick 7050- 丁7451(AMS 4050) 9065.25 6 Aluminium plate 44.45 mm thick 7050 T7451 1AMS 4050) 1260805 7 Alurniniurn plate 50.8 rnm thick 7050- T7451 1AMS 4050) 10743.15 8 Aluminium plate 57.15 mm thick 7050 T7451(AMS 4050) 1077460 9 Aluminium plate 63.5 mm thick 7050- 丁7451(AMS 4050) 6750.70 10 Aluminium plate 69.85 mm thick 7050. T7451(BMS7-323 Type l) 1007.25 Alurniniurn plate 76.2 mm thick 7050- T7451(BMS7‐ 323 Type l) 8967.50 12 Aluminlum Plate 31.75 mm thick‐ 7075-T7351(AMS―QQ‐A-250/12) 45.05 13 Aluminium Plate 38.l mm thick-7075・ T651(AMS― QQ―A‐250/12) 306.85 14 Aluminium Plate 50.8 mm thlck-7075・ 丁7351(AMS―QQ―A-250/12) 132.60 民 Alunliniurn sheet l.27 rnm thick 2024 … 10 一 ⌒ ⌒ AA No 0710110861 Dated:28.12.2016 一|ィ 3′ 脅|`メ タ

⌒ T3BAREIAMS― QQ‐A-250r4) 16 Steel sheet 2.032 mm Thick AMS 5513 87.40 17 Aluminium sheet l.6 mm thick 2024 T3BARE(AMS‐ QQ―A‐250/4) 45.05 18 Aluminium sheet l.8mm ttHICK 2024・ T3AMS―QQ―A-250/4 665.55 19 Aluminium sheet l.27MM THICK 6061-T4AMS¨ QQ―A-250ノ11 131.75 20 Alurniniurn sheet l.6 rnm thick 6061 T4BARE(AMS― QQ―A-250/11) 165.75 21 Aluminium sheet l.6 mm thick 7075 T6BAREIAMS― QQ―A-250ノ12) 201.45 22 Alurniniurn sheet O.8 rnm thick 6061- 丁4 BARE(AMS― QQ―A-250/11) 59.50 23 Aluminium sheet 2.032 mm tthick 7075‐丁6 BARE(AMS‐QQ―A-250/12) 496.40 24 Aluminium sheet 3.175 mm ttHICK 2024-丁3 BARE AMS― QQ‐A-250/4 117.30 25 26 Aluminium sheet 2.286mm THICK 6061-丁O BARE AMS― QQ‐A-250ノ11 17.15 Aluminium sheet l.27MM THICK 7075T6AMS― QQ―A-250/12 7.13 27 Aluminium sheet 2.032 mm THICK 7075-TO BARE AMS―QQ―A-250ノ12 9010 28 Aluminium sheet 2.286 mm ttHICK 7075-TO BARE AMS‐QQ‐ A…250ノ12 169.15 29 Aluminium sheet l.6002 mm THiCK 7075-TO Bare AMS― QQ‐A‐250ノ12 118.15 ~ル /3″ ⊆〃

⌒ 30 Aluminium sheet 2.032mm ttHICK 2024-丁O BARE AMS― QQ―A-250/4 3655 31 Aluminium sheet l.8034 mm THICK 7075-TO Bare AMS‐ QQ―A-250ノ12 32.30 32 Aluminium sheet l.6mm TH:CK 6061 T6Bare AMS―QQ―A-250ノ11 28.05 33 Steel Bar 19.05 mm Dia,SOLUT10N 丁REATED,15… 5PH 9880 34 Aluminium extrusion AND1 0133-1001 7075-T6511 47.00 35 Aluminium extrusion AND101 33‐ 1202 7075…T73511 112.00 Sno 92 net to net T ,-t "[ ry /rl/{ ?{h Gk ^,.*Q.aJ
Cか ′ rrL“ ´ Ъ `3′

タ AA 0710111555 dated 08.05。 17 Sno lmport Raw Materials / Components (xi) import a‖owed {kgノft} 1 AI Plate-1“ (25.4mm)丁HK AMS4050{7050- 丁7451) 1827.00 2 AI Plate-2.25"(57.2mm)THK AMS4050(7050- T7451) 7191 3 AI Plate2.5‖ (63.5mmlTK BMS 7-323(7050- T7451) 1594.00 4 AI Plate2.75“ (69.85mm)TK AMS4050(7050- T74ヽ1ヽ 1046.00 5 AI Plate 3‖ (76.2mm)TK BMS7-323(7050- T7451) 4065.00 6 AI Plate 2.5‖ (63.5mm)THK AMS4050(7050- T7451) 1165.00 7 AI Plate l.75"(44.45MM)TK 7050-T7451(AMS 4050) 524.00 8 A!Piate 2"(50.8mm)TK 7050-丁7451(AMS 4050) 488.00 9 AL PLT 121mm THK 7050-丁7451(BMS7-323) 15648.00 10 AI Plate-0.25‖ (6.35mmlTK 7075-丁7351 BARE AMS―QQ―A-250/12 4.00 11 ALSHT-0.04“ ―(1.016MM)AMS― QQ―A-250/12 7075-丁6 3.00 12 ALSHT‐ 0.025"(0.635mrn)TK CLAD 7075-丁6 (AMSIQQ― A-250/13) 65.00 13 ALSH丁-0.032"{0,81MMITHK AMS― QQ―A― 250/127075-丁6 BARE 50.00 14 ALSHT‐ 0.032‖ (0.81MM)Thk CLAD 7075- T6(AMS―QQ―A-250/13) 23.00 15 AI Sheet‐ 0.04“(1.016MM)AMS― QQ―A-250/13 7075-丁6 CLAD 28.00 一(`キー 準

16 AL SHT-0.1"{2.54mm)Tk 7075‐T76{AMS¨ QQ―A 250/25)CLAD SHT 35.00 17 Al-7075-0-1.016 mm BARE′ AMS― QQ― A― 250/12 24.00 18 ALSHT― .05‖ {1.27MM}Thk CLAD′ 7075- T6(AMS―QQ―A-250/13) 67.00 19 AI-7075-0-1.016 mm CLAD′ AMS― QQ― A― 250/13 8.00 20 ALSH丁-0.032"(0.81mm)THK′ CLAD SH丁2024- T3 13.00 21 ALSHT-0.05“ (1.27mm)丁k′ AMS― QQ―A-250/5 2024-T3CLAD 2.66 22 A卜2024-TO-1.016 mm CLAD′ AMS― QQ―A-250/5 13.00 23 A卜2024-丁0-0.8128 mm CLAD′ AMS― QQ―A― 250/5 215.00 24 T=1/2HD O.032"{0.81mm)tk S.S SHEET―AMS 5518-G=301 3.00 25 0.025“ {0.635mm)丁hk′ S.S SHEE丁―AMS 5516- G=302 2.90 26 AI-2024-0-0.05"(1.27mm)′ CLAD AMS― QQ―A― 250/5 125.00 27 Alsheet 7075丁76 Clad′ (AMS4316)0.8128 MM tthick 173.00 28 ALSH丁‐0.16‖ (3.96MM)(4.064mm)TK′ CLAD 7075-T6(AMS‐ QQ―A-250/13) 94.00 29 ALSH丁0.125"(3.175)丁K′ BARE 7075-丁6{AMS― QQ―Q-250/12) 13.00 30 ALCOA 49225/T!ERNAY 60-4675,7075-T6511′ AMS―QQ―A-200/11 14.00 31 AND10133-1401′ 7075-丁6511′ AMS― QQ―A― 200/11 9.00 32 AND10134-1003′ 7075-丁6511′ AMS― QQ―A― 200/11 29.00 一ゝ び ｀―
ク

ヽ 33 AND10134-2003′ 7075-丁6511′ AMS― QQ― A― 200/11 14.00 34 AND10136-2001,7075-T73511′ AMS― QQ― A― 200/11 24.00 35 AND10136-2006′ 7075-T6511′ AMS― QQ―A― 200/11 26.00 36 AND10137-1005′ 2024-丁4′ AMS‐QQ―A-200/3 28.00 37 BAC1503-100131′ 7075-丁6511′ AMS― QQ―A― 200/11 22.00 38 BAC1503-100133′ 7075-T6511′ AMS― QQ―A― 200/11 31.00 39 BAC1503-100339,7075-T73511′ AMS― QQ―A― 200/11 29.00 40 BAC1503-1420,7075-T6511′ AMS― QQ―A― 200/11 65,00 41 BAC1503-1420′ 7075-丁6′ AMS―QQ―A-200/11 120.00 42 BAC1503-1430,7075‐T6′ AMS―QQ―A‐200/11 27.00 43 BAC1504-8245′ 7075-0,AMS‐ QQ¨A-200/11 534.00 44 BAC1517-1521′ 7075-0′ AMS―QQ―A-200/11 673.00 45 BAC1517-1523′ 7075-0′ AMS‐QQ―A-200/11 935 46 MS20001H6 115.00 47 MS20001-PX4-400 23.00 48 MS20001-PX4-500 13.00 49 MS20001-PY12-188 3.00 50 MS20001-PY4-400 22.00 51 MS20001-PY4‐ 500 13.00 52 TIERNAY 60-16966,7075-丁73511′ AMS― QQ―A― 200/11 16.00 53 丁IERNAY 60-305′ 7075-T6′ AMS―QQ‐A‐200/11 14.00 54 TIERNAY 60-3233,7075-T6′ AMS― QQ― A― 200/11 14.00 ^t {t-

55 TIERNAY 60-8009′ 7075-0′ AMS―QQ―A-200/11 210.00 56 VS20101-1-2 12.00 57 VS20101-2-2 11.00 58 VS90407 10.00 62 50.8 MM diameter AMS6346/4130′ ALT― AMS6414/4340 34.00 63 38.l mm diameter 15-5PH/AMS5659 CRES 6.85 64 63.5 mm diameter AMS6414/4340,ALT― AMS― S-5000/4340 101.00 65 50.8 MM diameter AMS6371/4130 3.00 66 25.4 mm diameter AMS6414/4340 フ.80 67 44.45 mm diameter AMS6414/4340 9.00 68 AI Extrusion MS20001PH9-4900 136.00 69 AI Extrusion VS20106-1 288.00 70 AI Extrusion MS20001PX9-4900 136.00 71 AI Extrusion BAC1503-1513′ 7075-T6′ AMS― QQ―A-200/11 66.00 72 AI Extrusion BAC1514-1648′ 7075-T6511′ AMS―QQ―A-200/11 35.00 73 AI Extrusion VS90328′ 7075-T6′ AMS―QQ―A― 200/11 19.00 74 AI Extrusion BAC1510-1417′ 7075-丁73511′ AMS―QQ―A-200/11 133.00 75 AI Extrusion BAC1520-2804′ 6061-T6511′ AMS QQ―A-200/8 128.00 76 AI Extrusion BAC1520-2805′ 7075-丁73511′ AMS― QQ―A-200/11 416.00 89 Steelrod 44 45 mm diameter AMS 5643-CRES 17‐ 4PH 31.35 90 Steel rod 19.05 MM tThickness′ AMS 6346- 4130 STEEL Heat treated 8 にがりあア“徘 一 ノ И υ 一気 ヽ

⌒ 碁 毒ヮ 13 DIRECTORATE GENERAL OF FOREIGN TRADE DES 4.7 AGENDA Datc118 12 2019 ICasc No■1/19/80-ALC2/2017 Mcctinc Nu. I 7,80-AL( 2'2019 HQ File Number Ri,A File Number Liccnce Number Olfice of Issue IEC Name Address PIN Type of Licence Application Basis Status ofExporter Exporter Type Export Product Group CIF Value of the Licence CIF'FCC FOB Value FOB FCC ‐93069000 ‐93069000 193069000 ISTEEl.ROD 722880101{LOW ALIンOY ISTEEL 4340} :Al´ UMINIUM 76041HOIW16m lCONDIT10N} : 01/80/050/002921NM 18/Datcd:25012018 : 09/24/040/00o54/AM18/Datcd125 04 2017 : 0910065039 Datcdi15 05 2017 : Offlce ofJt DircctOr Gcnera1 0f Forcign Tradc Hyderabad 1 0991000552 :VEM TECHNOLOGIES PVT LTD 1 8-48/1,BACHUPALLY INDUSTRIAL AREA, :QUTUBULLAPUR MANDAL, :R R DIST,HYDERABAD想 : 500090 :Advancc Liccncc wlth AU COnditiOn i Export Order : Mallufacturcr Exportcr : Private Limitcd :ENGINEERING PRODUCTS i Rs 157,398,252 58 USs 2,384,82201 :2,384,822 01 US Dollars : Rs 244,163,30400:USs 3,699,44400 ,o,699,444 00 US pollars 鉢琳 ノr ク 15. Details of item to be exported/supplied under the Authorisation Sl No lrCHS Code Export ltem Name Qty uoM l-oB/FoR (Rs.) FoB/t-'oR 1in currency ofrealisatron.; I s306q000 fl'f;rtYr",Ji".'-t,t3roorro-u4 r3 ) 450 000 Number 2673000 00 40s00 00 US Doilars 2 el06s00' fl'f;r\tf,fiJufJ onr,o2sA-84r3; 220 000 Number 333q600.00 50600 00 US Doilars 3 e306e00, ,fi'f-rit3,);3i$;i[r, 23A_E4t3tirrrrooiNu.b., er47600 00 ],r*ioo o, US Donars

)Jvv'vv" leaRT NUMBER : D95w100lA-E ulS 252.000:Number,1l808720.b0 178920.00 US Dollars 5 9to69ooo 6ll0- FRoNT NUT J arvvavv " IPART NUMBER : D95W0006A-E 413) '252.000'Number 3492720.00 ,52920.00 US Dollars |:枇撚椰淵戦州凛 :認協f驚11‐ i6l/0- RING 7 {PART NUMBER : D95W30t3A-E413} 6IlO- RINC 8 {Pr\RT NUMBER . D95W30l4A-E413} 6 r/0- RtNG l2 ,{PART NUMBER : D95W30l7A-8413} 254000‐ Numbcr13855720 00 158420 00 US Dollars 254 000 1Numbcr13855720 00 58420 00 US Dollars 253 000 1Number12838660 00 143010 00 US Dollars _ _1 l T° taI1244,163,30400 13,699,44400 16.Details ofitems sought tO be impOrted duけfree under the AuthorisatiOn Sl N". [::lS Imporl trem Name. ety uoM fFは9 ,I CurcnC, 1職“ユ "OЮ る :i緊"“ US I,743,16228 1設「胎 58 tJS 157,398,2525812,384,82201 鵬 :薦器 ;¨お ml椰跳 3祝llc& 382257 0001K G 12000 000 1K G 45,005,57595 1,096,37221 Valuc&Qty Valuc&Qty Tota:

拇 Subject: Fixation of Adhoiliils against advance authorisation no Technologies pvt Ltd DGFT may please refer to the reply vide reference no VEIV{IJDGFTIAA-S4|74!|IZI2OI3- i4 dated 30-1.2013 received from IvI/t, Vem Technologies Prt Ltd, on the above.mentioned subject According to the above, the unit is .rforting only 17 items and made import ofbnly 02 items i.e aluminium plate & Steel-Rod'mentioned at srl no 4 and 5 of import list. Various machining lrouting operations are canied out on these raw materials. The weight details against rhe rar'; material used and the weight of export product as given by the unit has been shor,vn belorv, and accordingly the ,vastage has been calculated and is shown in table below:- m轟漱需蹴憲ち basis of above,the import ofitcln at srl no 04 i.e Steel Rod lnay be reconunended fl:::篭1譜路乳糧熙譜猫 nl:ちが職把鐸蝿電習糠 ´ ^ ハ Ｖ On the as 330545 Kg recommended .mateHal. ヽふウイ 鑢 41;11 (懸t Funda) Asst DЦヽlE) L ‐ 1型1取 "油mlr」 的 ｎ ｏ ｓ Wt of ExPort product lnport item weight ぽ税だと recoVery hpott WE aner scrap recovery ol l腱ng 04 1 05■ 270 283.5 4887 542 1820 Kg 02 腱n205 105 270 980.1 12177 381 4714 Kg 01 Ping 06 05 270 453.6 7006.5 483 2644 Kq ∪ Ring 07」 05 270 321.3 4500.9 434 1716K_g ワ Ring 08 J く リ ｎ ｖ 270 270 332.1 4500.9 419 1724K負 688.5 12015 549 4468 Kg ∩κ ∩0 05 p in。10 05 270 1085.4 4217.4 96 2127 ka 停 i;^n 1) -f 05 27Q__ 280_8_´ _ 4077 452 、150.聰_ Saddle フ 270 looll.6 442〃 114 21425 kg 可 ソ 3477.6 19170 ０ ０ ● 、 υ 13910k2 ■ Ring ll y 04 270 2435.4 5940 96 4773 kg レ Rear Cover 04 270 270 1385.1 5490 197 4114 kR {2 *4 Rear nut '/ 04 瞥 ノ 爾 :llllpr
√ 04 270 3410.1 10935 146 S3S9 urel 04 270 618.3 8316 830 5750 kg ´ f亀 Lug Housing. 04 270 348.30 2700 450 1916 kg ■し Front Nut υ 04 270 1020.60 2295 83 186S kR 暫/ Primary Machining Bodv 04 200 231860.00 321000 25 2Sりも25 kg 比 This issue Scanned with CamScanner 18. tz, tt .●.ル′ |イ 11・ γ

Ｆ ／ バ ● 〓 拝じ ´ | イ ル″ ク AA 0710111628 dated 19.o5.17 SI.No 108 lmport Raw material/ components used for manufacturing :mport a‖owed (kgrfrm) Titaniurn Sheet′ 0.lrnrn thlck′ Annealed Ti― P99002 To be deleted as requested by firm 109 Stainless Steel Sheet′ 0.4 MM ttHiCK ――――――(DIN65389AGO‐4) 110 Stainless Steel Sheet′ 0.5 MM THICK {DIN65389AGO-5} Stainless Steel Sheet′ 0.6 MM ttHICK (DIN65389AGO-6) 112 Austenitic stainless steel′ 0.l MM THICK (ABS5782010) 113 Austenitic stainless steel′ o.2 1ⅥM ttHiCK (ABS5782020) 114 Austenitic stainless steel′ 0.3 MM THICK (ABS5782030) 115 A!uminium AIloy 2024 T3 Clad Sheets(QQ‐ A250-5‐ 2024丁3-。008) 116 AL Sheet O.3MM ttHICK′ AL ALLOY 2024 T3 CLAD SHEETS(ABS5044D003) 117 AL Sheet O.4MM ttHICK′ AL ALLOY 2024 T3 CLAD SHEETS(ABS5044D004) AL Sheet O.5MM TH:CK′ AL ALLOY 2024丁3 CLAD SHEETS(AB55044D005) |||| ||■■■■|||||| |十IⅢI ● 11ふ| 118 ||‐ |‐ ||‐ ||||||‐ |‐ |‐ ‐ ‐ ||||||||‐ | ||:ソザー YI ■■||||||||||||||||||||||

´ （ 119 AL Sheet o.6ⅣiM THICK′ AL ALLOY 2024 T3 CLAD SHEETS(ARAS00184′ ABS5044D006) 120 AL Sheet O.8MM ttHicK′ AL ALLOY 2024丁3 CLAD SHEEttS(ARAS00182′ ABS5044D008) 121 AL Sheet l.OMM THlcK′ AL ALLOY 2024丁3 CLAD SHEEttS(ARAS00181′ ABS5044D010) 122 AL Sheet l.8MM THICK′ AL ALLOY 2024 T3 _ CLAD SHEEttS(ARASA3300002′ 123 AL Sheet 2.O MM THlcK′ AL ALLOY 2024 T3 CLAD SHEETS(ARASA3300003′ ABS5044D002) 132 DAN59DAN2001′ Aluminium Extrusion 7075′ T79511-5 133 F575‐ 72242‐ 3.4364′ Alurniniurn Extrusion′ T73511 134 ABS5100A0151′ Alurninium Extrusion 2024′ T3511 135 ABS5100A0173′ Alurninium Extrusion 2024′ 丁3511 136 ABS5750A4050′ Stainless Steel Plate′ Precipitation Hardened 15-5PH 137 ABS5691B500′ Steei sheet′ Hot Ro‖ed precipitation hardened′ pickled 138 LN9108AC100′ Rubber S‖ icOn press plate 139 ABS5442C0400′ Stainless steel Round Rod′ 5olution ttreated and Precipitation Hardened PH13-8MO 140 LN9396C16-20′ Stainless Steel Tube 々 υ ヽ ノ ｒ ｅ ｓ 　 ノ 熟 　 　 　 ″ 　 　 ″ ｎ ｏ ． 　 　 ノ イ υ ι ´つ′ ・与 7「タ ● 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 一 一 一 ・ 一 一 一 ・ 一 一 一 一 一 一 一 ¨ 一 一 一 一 一 一 一 一 一 一 一 ・ ・ 一 一 一 一 ． 一 一 一 ． 一 一 一 一 一 ● |■# |● |::rふ| ■ ■‐|■|■ IⅢI

⌒ ‐ 与′ AA 0710111634 dated 22。05.2017 Sno lmport Raw Materialsize used for manufacturing :mport a‖owed {kg/仕} 1 Aluminium Plate 25.4 mm Thickness′ AMS4050′ 7050- 丁7451 3864.00 2 Aluminium Plate 57.15 mm Thickness,AMS4050,7050- T7451 12951.00 3 Aluminiunl Plate 31.75 mnl丁hickness′ AMS4050′ 7050- 丁7451 1224.00 4 Aluminium Plate 63.5 mm tthickness′ BMS7-323′ 7050- T7451 230.35 5 Aluminium Plate 76.2 mm tthickness′ BMS7-323′ 7050- T7451 4276.00 6 Aluminiurn Plate 63.5 mm tthickness,AMS 4050′ 7050- T7451 3725,00 7 Aluminium Piate 82.55 mm Thickness′ BMs7-323′ 7050- 丁7451 4000.00 8 Aluminiunl Plate 50.8 mm tthickness′ AMS 4050′ 7050- 丁7451 3804.00 9 Aluminium Plate 38.l mm tthickness′ BMs7-323,7050- 丁7451 345.00 10 Aluminium Sheet l.o16 MM Thickness′ Bare′ 7075-T6 AMS―QQ―A-250/12 107.00 11 Aluminium Sheet l.27 MM Thickness′ Bare′ 7075-T6 AMS―QQ―A-250/12 30.00 12 Aluminium Sheet O.635 MM tthickness′ Clad′ 7075-丁6 AMS― QQ―A-250/13 20.00 13 Aluminium Sheet O.8125 MM Thickness′ 3are′ 7075-TO AMS―QQ‐A-250/12 34.00 14 Aluminium Sheet O.8125 MM tthickness′ clad′ 7075-丁0 AMS―QQ―A-250/13 20.00 15 A!uminium Sheet l.27 MM tthickness′ Bare′ 7075-TO AMS―QQ―A-250/12 89.00 ―|イr‐ 〈 (`::::11::f.

― ｀ 16 Aluminium Sheet l.6MM′ 丁hickness′ Bare′ 7075-TO AMS―QQ―A-250/12 2o.00 17 Aluminium Sheet o.6 MM Thickness′ Bare′ 7075-TO AMS QQ―A-250/12 20.00 18 Aluminium Sheet l.27 MM tthickness′ clad′ 7075-丁76 AMS―QQ―A-250/25 68.00 19 Alurninium sheet O.8 MM Thickness′ Bare′ 7075-丁6 AMS―QQ‐A-250/12 9.00 20 Aluminium sheet 2.54 MM tthickness′ Clad,7075-丁76 AMS― QQ―A-250/25 20.00 21 Aluminium Sheet l.016 MM Thickness′ Bare′ 7075-T0 AMS―QQ―A-250/12 54.00 22 Aluminium Sheet l.6 MM Thickness′ clad′ 7075-T76 AMS―QQ―A-250/25 5.00 23 Aluminium Sheet 2.O MM Th:ckness′ clad,7075-丁O AMS QQ―A-250/13 18.00 24 Aluminium Sheet O.635 MM Thickness′ Bare′ 7075-T6 AMS―QQ―A-250/12 6.00 25 Aluminium Sheet O.635 M M tthickness′ Clad′ 2024-T3 AMS― QQ―A-250/5 54.00 26 Aluminium Sheet O.8 MM Thickness′ Clad′ 2024-丁3 AMS QQ― A‐250/5 40.00 27 Aluminium Sheet l.27 MM tthickness′ clad′ 2024-丁3 AMS―QQ―A-250/5 89.25 28 Aluminium Sheet l.6 MM tthickness′ ciad′ 2024-丁3 AMS QQ―A-250/5 22.95 29 Alumin:um Sheet l.016 MM tthickness′ clad′ 2024-T3 AMS―QQ―A-250/5 30.00 30 Aluminium Sheet O.635 MA/1 Thickness′ clad′ 2024-TO AMS―QQ―A-250/5 95.00 31 Aluminium Sheet l.016 MM Thickness,clad′ 2024-TO AMS―QQ―A-250/5 50.00 32 Aluminium Sheet O.8 MM tthickness′ clad′ 2024-TO AMS QQ―A-250/5 12.00 33 Aluminium Sheet O.5 MM Thickness′ Clad′ 2024-丁3 AMS QQ―A-250/5 70.00 34 Alumin:unl sheet l.8 MM Thickness′ Bare′ 2024-T3 AMS QQ―A-250/5 30.00

35 Aluminium Sheet l.27 MM tthickness′ Bare′ 2024-丁3 AMS―QQ―A-250/5 61.20 36 Aluminium Sheet 3.175 MM Thickness′ clad′ 7075‐ 丁0 AMS―QQ―A-250/13 17.00 37 Aluminium sheet 2.O MM Thickness′ clad′ 2024-丁3 AMS・ QQ―A-250/5 17.00 38 Aluminium Sheet 2.54 MM Thickness′ c!ad′ 2024-T3 AMS¨ QQ―A-250/5 18.00 39 Aluminium Sheet l.6 MM tthickness′ Bare′ 2024-T3 AMS QQ―A-250/4 23.00 40 Aluminium Sheet l.016 M M Thickness′ Bare′ 6061-T6 AMS―QQ―A-250/11 11.00 41 Aluminium Sheet l.o16 MM tthickness′ Bare′ 6061-丁4′ AMS4347 37.40 42 Aluminiunn Sheet O.81 MM Thickness′ Bare′ 6061-丁4 AMS4347 54.00 43 Aluminium Sheet 3.5 MM Thickness′ Bare′ 2024-T3 AMS―QQ―A-250/4 23.80 44 Alumin:um sheet l.27 MM tthickness′ Clad′ 2024‐T0 AMS―QQ‐A-250/5 17.00 45 Aluminium Sheet l.016 MM tthickness′ Bare′ 6061-TO AMS4025 19.00 46 Aluminium Sheet O.5 MM Thickness′ Bare′ 6061-丁6 AMS QQ―A-250/11 9.00 47 Aluminium Sheet l.27 MNl Thickness′ Clad′ 7075-丁0 AMS―QQ―A-250/13 243.00 48 Alum:nium Sheet 2.54 MM Thickness′ clad′ 7075-T0 AMS―QQ―A-250/13 167.00 49 A!uminiunl Sheet 3.175 MM tthickness′ Clad′ 7075-丁0 AMS―QQ―A-250/13 51.00 50 Aluminium Sheet O.5 MM Thickness′ C!ad′ 2024-丁0′ AMS QQ―A-250/5 74.00 51 Aluminium Sheet l.6 MM Thickness′ clad′ 7075-T6′ AMS QQ―A-250/13 574.00 52 Aluminium Sheet O.5 MM Thickness,Clad′ 2024-丁OAMS― QQ―A-250/5 61.00 53 Steel Plate 12.7 MM tthickness′ STEEL4340/AMS6359 431.00 54 Steel Plate 63.5 MM Thickness′ AMS6414(4340-N&丁) 372.00 -3ィ′″ ι暑′

⌒ ~ 55 Steel Rod 50.8MMd:ameter AMS6346/4130′ ALT― AMS6414/4340 33.00 56 Steel Rod 38.l mm diameter15-5PH/AMS5659 CRES 7.00 57 Steel Rod 63.5 mm diameter AMS6414/4340′ ALT―AMS―S 5000/4340 95.00 58 Steel Tube 50.8 MM diameter AMS6371/4130 18.00 59 Steel Rod 25.4 mm diameter AMS6414/4340 4.60 60 塾91 Rod 44.45 mm Jiameter AMS6414/4340 9.50 61 Steel Sheet l.o16 MM tthickness,1/4 HARD AMS5517 STEEL 301 33.00 62 Stee!Sheet l.6 MM tthickness′ 1/4 HARD AMS5517 STEEL 301 116.85 63 Steel Sheet O.3048 MM Thickness′ 1/4 HARD AMS5518 STEEL 301 4.00 64 Steel Sheet O.8 MM Thickness′ 1/4 HARD AMS5518 SttEEL 301 18.00 65 Steel Sheet l.6 MM tthickness′ 1/4 HARD AMS6350 STEEL 4130 5.00 66 Steel Sheet 2.54 MM tthickness′ AMS5528 7.00 67 Steel Sheet l.6 MM Thickness′ AMS5528 16.00 68 Stee:Sheet 4.O MM tthickness′ AMS5528 19.00 69 Aluminium Extrusion ALCOA 49225/T!ERNAY 60-4675′ 7075-T6511′ AMS―QQ―A-200/11 16.00 70 Aluminium Extrusion AND10133-1401′ 7075-丁6511′ AMS QQ―A-200/11 16.00 71 Aluminium Extrusion AND10134-1003′ 7075‐ T6511′ AMS QQ―A-200/11 30.00 72 Aluminium Extrusion AND10134-2003′ 7075-丁6511′ AMS QQ―A-200/11 15.00 73 Aluminium Extrusion AND10136-2001′ 7075-T73511′ AMS―QQ―A-200/11 26.00 74 Aluminium Extrusion AND10136-2006′ 7075-丁6511′ AMS QQ―A-200/11 27.00 一気/r― ク

⌒ 75 Aluminium Extrusion AND10137-1005′ 2024-T4′ AMS― QQ―A-200/3 29.00 76 Aluminiunl Extrusion BAC1503-100131′ 7075-丁6511′ AMS―QQ―A-200/11 26.00 77 Aluminium Extrusion BAC1503-100133′ 7075-丁6511′ AMS―QQ―A-200/11 36.00 78 Aluminium Extrusion BAC1503-100339′ 7075-丁73511′ AMS―QQ― A‐200/11 31.00 79 Aluminium Extrusion BAC1503-1420,7075-T6511′ AMS― QQ―A-200/11 71.00 80 Aluminium Extrusion BAC1503-1420,7075-T6′ AMS―QQ― A-200/11 129.00 81 Aluminium Extrusion BAC1503-1430′ 7075-丁6′ AMS― QQ― A-200/11 28.00 82 Alum:nium Extrusion BAC1504-8245′ 7075-0′ AMS―QQ―A 200/11 572.00 83 Aluminium Extrusion BAC1517-1521′ 7075-0′ AMS―QQ―A 200/11 722.00 84 Aluminium Extrusion BAC1517-1523′ 7075-0′ AMS―QQ―A 200/11 1004.00 85 Alunlinium Extrusion MS20001H6 123.00 86 Aluminium Extrusion MS20001-PX4-400 24.00 87 Aluminium Extrusion MS20001-PX4-500 16.00 88 Aluminiurn Extrusion MS20001-PY12-188 16.00 89 Aluminium Extrusion MS20001-PY4-400 24.00 90 Aluminium Extrusion Ms20001‐ PY4‐500 16.00 91 A!uminium Extrusion T:[RNAY 60… 16966′ 7075-T73511′ AMS―QQ‐A-200/11 16.00 92 Aluminium Extrusion丁IERNAY 60-305′ 7075-丁6′ AMS―QQ A-200/11 16.00 93 Aluminium Extrusion TIERNAY 60-3233′ 7075-T6′ AMS― QQ―A-200/11 16.00 94 Aluminium Extrusion T!ERNAY 60-8009′ 7075-0′ AMS― QQ―A-200/11 226.00 一夕/′ ″ ク ,

Extrusion VS20101-1-2 inium Extrusion vs20101-2‐ 2 ium Extrusion Vs9o407 全1望りinium Tube 6061-T6′ AMS―Ww-700/6 7YPEl Tube AMS― T-7081′ 6061-T6 SN0 130 nettO net Jノィ 繊 ε払ψレイ″″″ … G″ Y ク ' ブ 3°d夕″ 咤ブイ ヽ
´ ヽ 　 ９ ５ 一 　 　 ９ ６ 16.00 16.00 ９ ７ 一 　 　 ・ ５ 。 16.00 38.00 151 62.00

ノタ 7″ 0710112968 Dated:13.03.2018 SI.No lmport Raw material/ components used for manufacturing lmport allowed (kg/fUm) 1 Aluminium Plate 12.7 mm thick 7050‐ T7451 (AMS 4050) 2 Aluminium plate 19.05 mm thick 7050-T7451 (AMS 4050) 3 Aluminium plate 25.4 mm thick 7050-T7451 (AMS 4050) 4 Aluminium Plate 31.75 rnm thick 7050-T7451 (AMS 4050) 5 Aluminium plate 38.l mm thick 7050-T7451 (AMS 4050) 6 Aluminium plate 44.45 mm thick 7050‐ 丁7451 (AMS 4050) 7 Aluminium plate 50.8 mm thlck 7050-T7451 (AMS 4050) 8 Alum:nium plate 57.15 mm thick 7050-T7451 (AMS 4050) 9 Aluminium plate 63.5 mm thlck 7050‐ T7451 (AMS 4050) 10 Aluminium plate 69.85 mm thick 7050-T7451 (BMS7-323 Type l) Aluminium plate 76.2 mm thick 7050-T7451 (BMS7-323 Type l) 12 Aluminium Plate 31.75 mm thick-7075-丁7351 (AMS― QQ…A-250ノ12) 13 Aluminium Plate 38.l mm thick-7075-T651 (AMS― QQ¨A-250ノ12) 14 Aluminium Plate 50.8 mm thick‐ 7075‐T7351 (AMS― QQ―A-250ノ12) 15 Aluminium sheet l.27 mm thick 2024-T3 BARE(AMS―QQ―A-250r4) ―l弓2″ イル｀ 〆 寡 ´ ´ ‐

A~ 16 Steel sheet 2.032 mm Thick AMS 5513 17 Aluminium sheet l.6 mm thick 2024 T3 BARE(AMS―QQ―A-250r4) 18 Aluminium sheet l.8mm THICK 2024…T3AMS― QQ―A-250ノ4 19 Aluminium sheet l.27MM THICK 6061-T4AMS‐ QQ―A‐250711 20 Aluminium sheet l.6 mm thick 6061丁4 BARE(AMS―QQ―A-250/11) 21 Aluminium sheet l.6 mm thick 7075 T6 BARE(AMS…QQ…A-250ノ12) 22 Aluminium sheet O.8 mm thick 6061-丁4 BARE(AMS―QQ―A…250′ 11) 23 Aluminium sheet 2.032 mm Thick 7075-T6 BARE(AMS―QQ―A-250/12) 24 Alumlnium sheet 3.175 mm THiCK 2024-T3 BARE AMS‐QQ‐A‐250ノ4 25 Aluminium sheet 2.286mm THICK 6061-TO BARE AMS―QQ―A…250ノ11 26 Aluminlum sheet l.27MM THICK 7075 T6 AMS― QQ…A-250ノ12 27 Aluminium sheet 2.032 mm ttHICK 7075-TO BARE AMS―QQ…A-250ノ12 28 Aluminium sheet 2.286 mm THICK 7075-TO BARE AMS―QQ―A-250/12 29 Aluminium sheet l.6002 mm THICK 7075-丁0 Bare AMS― QQ―A-250/12 30 Aluminlum sheet 2.032mm THICK 2024-TO BARE AMS―QQ―A-250ノ4 31 Aluminium sheet l.8034 mm THICK 7075‐TO Bare AMS― QQ―A=250ノ12 32 Aluminium sheet l.6mm THICK 6061-T6Bare AMS― QQ―A-250′ 11 33 Steel Bar 19.05 mm Dia,SOLU丁10N TREATED,15‐ 5PH 34 Aluminlum extrusion AND10133-1001-7075- T6511 35 Alurninium extrusion AND10133‐ 1202-7075- T73511 O"l ^',1. X "T /- dx"fl"rf 7'"*''l = q6 btr ('i ,!a- QN'4 夕 ｀ ||:話瀞| ■||■■|||■■||||||||■|||||■111 1‐ ‐ ||||||||||||||‐ |‐

||||‐
||||||||||||||‐
||||||||‐ |||||■|||||||||||||||||||||||||
||||||||‐0101QIIIIIIII
|■|1011●■||

■■■■■■|■■■■■||111 || ‐ | ‐‐ ‐
■ || || ‐ 133.oo‐ ||‐ ■ | | ■■| ||||||■■ |■|'こ6「″|

⌒ 0710113340 Datedi28.05.2018 Sl.No lmport Raw material/ components used for manufacturine :mport a!!owed ikEノftノm〕 116 Titaniurn sheet′ 0.lrnrn thick′ Annealed丁i―P99002 To be deleted 117 Stainless Steel Sheet′ 0.4 MM THICK {DIN65389AGO‐4) 118 Stainless Steel Sheet′ 0.5 MM ttHICK {DIN65389AGO-5) 119 Stainless Steel Sheet′ 0.6「ⅥR/1TH:CK {DIN65389AGO-6) 120 Austenitic stainless steel′ 0。l MM THICK {ABS5782010) 121 Austenitic stainless steel′ 0。2 MM ttHICK (ABS5782020) 122 Austenitic stalnless steel′ 0.3 MM ttHiCK (ABS5782030) 123 Alum:n:um AIloy 2024丁3 Clad Sheets(QQ― A250-5- 2024T3-.008) 124 AL Sheet O.3MM TH:CK′ AL ALLOY 2024 T3 CLAD SHEETS{ABS5044D003) 125 AL Sheet O.4MM THiCK′ AL ALLOY 2024 T3 CLAD SHEEttS{ABS5044D004) 126 AL Sheet O.5MM ttHICK′ AL ALLOY 2024丁3 CLAD SHEETS{ABS5044D005) AL Sheet O.6MM THICK′ AL ALLOY 2024 T3 CLAD SHEEttS(ARAS00184′ ABS5044D006) ―′ イみ‐ イ ルハ イ ´ ・

ハ ノ λ 128 AL Sheet O.8MM THiCK′ AL ALLOY 2024丁3 CLAD SHEETS(ARAS00182′ AB55044D008) 108101 129 AL Sheet l.OMM THICK′ AL ALLOY 2024 T3 CLAD SHEETS{ARAS00181′ AB55044D010) 130 AL Sheet l.8MM THiCK′ AL ALLOY 2024 T3 CLAD SHEETS(ARASA3300002,AB55044D018) 2811 131 AL Sheet 2.O MNq THICK′ AL ALLOY 2024 T3 CLAD SHEEttS{ARASA3300003′ ABS5044D002) 14,01こ 140 DAN59DAN2001′ Aluminium Extrusion 7075′ T79511-5 141 F575‐72242-3.4364′ Alurniniurn Extrusion′ 丁73511 142 ABS5100A0151′ Alurniniurn Extrusion 2024′ 丁3511 13169‐:6 143 ABS5100A0173′ Aluminiurn Extrusion 2024′ T3511 144 ABS5750A4050′ Stainless Steel Plate′ Precipitation Hardened 15-5PH ,「彎♀ 145 ABS56918500, Steel sheet, Hot Rolled precipitation hardened, pickled 146 LN9108AC100′ Rubber Silicon press plate 66.0 147 A8S5442C0400, Stainless Steel Round Rod, Solution Treated and Precipitation Hardened PH13 8MO 148 LN9396C16-20′ Stainless Steel Tube 13516 Sno 140 to 143&148 is in rnetres a7 ,-t { 缶 ム Cプイ G″″ツ ク : 傷 “ ノ′γ′みノ奮タノ ・ヤフ 「, ⌒ 163316‐ || 344.9

!mport Raw material/ components used for manufacturing AISheets 7075 AMS― QQ‐A-250/12T6 2.29MM THK′ ABH407RAS0006 AISheets 7075 AMS― QQ―A-250/12T6 2.54MM ttHK′ ABH407RAS0007 AI AIloy Extrn― Flat(BULBED) Material:40-049-12024T3Std Size in AI AIlov Extrn― Flat(BULBED) Material:40‐049-2 Type 2024 T3 Std AI A‖oy Extrn― L(BULBED)Material:40‐ 050‐ l Type 2024 T3 Std Size in feet′ AI AIlov Extrn― L{BULBED)Material:40- 050‐2丁ype 2024 T3 Std Size in feet′ ARAE00067 AI AIloy Extrn‐ L{BULBED}Material:40- 129… l Spec:ASTM B221 Type 2024 T3 Std Size in feet′ ARAE00068 AI A‖ov Extrn― L Material:40‐ 302‐ 1 Spec:AMS― QQ― A‐200/117075T73 Std Size in feet′ ARAE00069 AlAlloy Extrusion-T Material:AND10136-1503 Type:7075 AI A‖oy Extrusion―T Material:AND10136-2004丁ype:7075 Spec:QQ― A-200/1l T6 Std Size in feet′ ARAE00072 AI A‖ oy Extrusion― U Material:AND10137-1402 Type:7075 Spec:QQ― A-200/1l T6Std Size in feet′ ARAE00073 AI A‖ov Extrusion―Stretch Material:AND10134‐ 1205 Type-7075 Spec:QQ‐ A-200/1l T6 Std Size in feet′ Ⅲ 0710113346 Dated:28.05.2018 ‐′/2- 《ひ′ イ ‐ Sl.No (kgrfum) 1 海 2 3 4 5 1● 6 7 8 一 一 一 一 一 一 一 一 一 一 一 一 ． 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 一 ・ 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 ・ 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 一 一 一 ・ 一 一 一 一 一 一 一 一 一 一 一 一 ・ ． 一 ・ ・ 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 一 ・ 一 一 一 ・ 一 一 一 一 ・ 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ・ 一 一 一 一 一 一 ． 一 ． 一 ． 一 一 一 一 一 一 ・ 一 一 一 一 一 一 一 一 一 一 一 9 ■|||■ 10 一 一 一 　 一 一 一 一 　 　 一 ・ 一 一 ● ９ ６ 一 一 ・ 一 一 　 一 一 一 一 一 一 一 ・ 一 一 一 一 一 一 一 　 一 一 一 ・ 一 一 一 一 一 一 ． 一 11 12 ⌒

13 AI Plate 7075 AMS― QQ‐A-250/12丁6′ 9.525NlM THK′ ARAP00099 14 AISheets 7075 AMS― QQ―A-250/12T6 0。41MM THK′ ARAS00022 15 AISheets 7075 AMS― QQ― A‐250/12T6 0.635MM THK′ ARAS00024 16 AISheets 7075 AMS― QQ‐A-250/12丁6 0。8128 MM THK′ ARAS00025 17 AISheets 7075 AMS― QQ‐ A‐250/12T6 1.016MM THK′ ARAS00026 18 AISheets 7075 AMS― QQ‐ A‐250/12T6 1.27MM THK′ ARAS00027 19 AISheets 7075 AMS― QQ― A‐250/12T6 1.6002MM THK′ ARAS00028 20 AISheets 2024 AMS― QQ¨A-250/4T3 0。81MM THK,ARAS00033 21 AISheets 2024 AMS― QQ― A…250/4丁3 1.016MM THK′ ARAS00034 22 AISheets 2024 AMS― QQ―A-250/4T3 1.27MM THK′ ARAS00035 23 AISheets 2024 AMS― QQ― A‐250/4T3 3.175MM THK′ ARAS00088 24 AISheets 7075 AMS― QQ―A-250/12T6 0.508MM THK′ ARAS00113 _ 25 AISheets 7075 AMS― QQ―A-250/12T6 0.635MM THK′ ARAS00114 26 AISheets 7075 AMS― QQ― A‐250/12丁6 1.27MM THK′ ARAS00116 27 AISheets 7075 AMS― QQ― A‐250/12T6 0.19812 MM ttHK′ ARAS00157 28 AISheets 2024 AMS‐ QQ―A-250/4丁3 0。508MM THK′ ARAS00171 29 AISheets 2024 AMS― QQ―A-250/4T3 2.032 MM THK′ ARAS00174 30 AITube WW―T-700/6′丁Y160610.049‖ Wall Thickness〔11::Dia〔弘L=4"T6Std 31 Cres AMS 5604 Type-17-4PH A l.27MM THK′ ARSS00028 ジ)ム焦Чイた″ 憾嗜 争 1111卜11

||||lii'お61111
|||||
||:::胤||
||||||||||||||||||||||‐
|||||ヽ
|||‐ |||||||||||||||
|■|

■t「 |■■■■ ||||||||||■|||| IⅢⅢ■ ⅢⅢI |ltil ||||||141251111 1■■|■■■■■1■ |■■■|: 411 1111111111111111111111■

協 0710113344 Dated:28.05.2018 SI.No lmport Raw material/ components used for manufacturing lmport allowed (kg/fUm) 1 Alurninium Plate′ 7050′ AMS 4050′ T7451′ 31.75MA/1THK ARAP00046 2 Aluminium Plate′ 7075′ AMS― QQ―A-225/9′ 丁651′ 6.35MM THK ARAP00103 3 A!uminium Sheet 7075′ AMS―QQ¨A-250/12′ T60.41MM THK ARAS00022 4 Aluminium Sheet 7075′ AMS―QQ― A‐250/12′ T60.64MM THK ARAS00024 5 A!uminium Sheet 7075′ AMS―QQ―A-250/12′ T60.81MM THK ARAS00025 6 Aluminium Sheet 7075′ AMS―QQ― A…250/12′ 丁61.02MM THK ARAS00026 7 Aluminium Sheet 7075′ AMS―QQ―A-250/12′ T61.6MM THK ARAS00028 8 Aluminium Sheet 7075′ AMS―QQ―A-250/12′ T62.03MA/1THK ARAS00030 9 Aluminium Sheet 2024′ AMS‐QQ― A‐250/4′ 丁3 0.64MM THK ARAS00032 10 AMS―QQ―A‐250/4′ T3 0.81MM THK ARAS00033 11 AMS‐QQ¨A‐250/4′ T3 1.02MM THK ARAS00034 12 AMS―QQ―A-250/4′ T3 1.27MM THK ARAS00035 13 Aluminium sheet 2024′ AMS― QQ‐A-250/4′ T3 1.6MA/1THK ARAS00036 14 Aluminium Sheet 6013 T4 AMS4347 1.02MM THK ARAS00037 15 Aluminium Sheet 6013丁6 AMS4347 1.27MM THK ARAS00042 16 AMS―QQ―A-250/4′ T3 3.18MM THK ARAS00088 17 Aluminium Sheet 6013 T4 AMS4347 1.60NlM THK ARAS00152 一′イルー /ノ ´ 万7⌒ ヘ |■■ⅢⅢ来 ■ゴ 一 一 一 一 一 一 一 一 一 一 一

⌒ Alurninium Sheet 6013 T4 AMS4347 1.02MM THK ARAS00155 Aluminium Sheet 6013 T4 AMS4347 0.81MM THK ARAS00156 Aluminium Sheet 7075′ AMS― QQ―A-250/12′ T61.02MM ttHK ARAS00159 Aluminium Sheet 6013丁4 AMS4347 0.64MM THK ARAS00165 Aluminium Sheet 7075′ AMS―Q Q―A-250/12′ T6′ 4.83MM ttHK ARAS00168 Alumin:um Sheet 2024′ AMS¨QQ‐A-250/4′ 丁3 0.51MM THK ARAS00171 AMS―QQ―A-250/4′ 丁3 1.02MM THK ARAS00172 AMS―QQ―A-250/4′ T3 1.60MM THK ARAS00173 AMS―QQ―A-250/4′ 丁3 2.03MM THK ARAS00174 Corrosion Resistant Steel per ASTM A167. Type 301.(Hinges)MILITARY STD MS2025 200 ARSS00037 Aluminium Extrusion 2024丁4AMS―QQ― A― 200/3 AND10133-0501 ARAE00078 Aluminium Extrusion BELL STD 40-012 AI A‖ oy′ Type-7075,Specification― 200/11′ Temper― T651l ARAE09哩 ｀ し/ら1∫′/ (多′了 Lル｀ ″ /´″ r r?ヶ 句 18 ■ |
‐●1_■ ‐|||■||||||||| ||||■1111:|ltl●■■llυυll111111111111 41■|■■|■■|ヽ|●|■■| 19 20 ←′)||1驀→ヽ 117■ 21 22 23 24 25 ||■■||| |■■ |■■■■ 1 11111111111111111111111111111111111 26 28 30 31

0710113347 Dated128 05 2018 作 47プ ft允タ プ イ ア ・″ ζち ケ τノ イ ・

‐ SI.No tmport Raw material / components used for manufacturing import a‖owed (kgrftrm) 1 Aluminium P!ate AMS‐ QQ― A‐250/127075T7351 31.75MM ttHK ARAP00088 Aluminium Plate AMS4050 7050丁745182.55MM THK ARAP00104 Aluminium Piate AMS4050 7050 T7451 101.6MM THK ARAP00105 4 Alunninium P!ate AMS4050 7050 T7451 101.6MM THK ARAP00105 5 Aluminium Plate AMS4050 7050 T7451 101.6MM THK ARAP00105 6 AL PLT 57.15MM THK AMS4050 7050 T7451 57.15MM THK ARAP00106 7 Aluminium Sheet AMS― QQ―A-250/127075T6 0.635MM ttHK ARAS0024 8 Aluminium Sheet AMS― QQ―A-250/127075T6 1.016MM THK ARAS00026 9 A!uminium Sheet AMS― QQ―A-250/127075T61.27MM THK ARAS00027 10 Aluminium Sheet AMS― QQ―A-250/137075T6 1.6002MM THK ARAS00028 Aluminium Sheet AMS― QQ―A-250/127075T6 1.8034MM THK ARAS00029 12 Aluminium Sheet AMS‐ QQ― A‐250/42024T3127MM THK ARAS00035 13 Aluminium Sheet AMS― QQ―A-250/42024T3 1.6002MM THK ARAS00036 14 Aluminium Sheet AMS4347 6013丁40.8128MM THK ARAS00041 15 Aluminium Sheet AMS― QQ― A‐250/42024T33.175MM THK ARAS00193 16 Stainiess Steel Sheet,AMS5517 301 1/4HD l.016MM THK ARSS00009 17 Stainless Steel Sheet AMS5517 301 1/4HD l.6002MM THK ARSS00010 18 Stain!ess Steel Sheet MiL― S-6721(AlternaJve Spec:AMS5510)3210.635MM THK ARSS00919 19 Stainless Steel Sheet AMS5901 301 ANL l.016MM THK ARSS00041 20 Stainless Stee:Sheet AMS5516 302 ANL O.4064MM THK ARSS00043 21 Titanium Sheet MIL― T‐9046,COMP CP-l ANL O.3048MM THK ARTS00006 22 Titanium Sheet M:L― T-9046′ TY:‖ ′COpИ P C 6AL‐4V ANL O.635MA/1THK ARTS00017 1519.00 ¨ 一 一 一 ・ 一 一 一 ． ５ 一 一 一 証 一 一 一 一 一 一 一 一 一 ・ 一 一 一 一 一 ・ 一 ・ ・ 一 一 一 一 一 一 一 一 一 ・ 一 ． ． 一 一 ． ． 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 ■ :三 IⅢI 一 一 一 一 あ ● ||| ⅢⅢ |■111YYII ●|■|||■||■ ⌒ ^

ヘ 帰 0710113846]Dated:14.09。2018 lmport Raw material/ components used for manufacturing import a1lowed (kgrfum) Sl.No 1 Aluminium ExtruSion AMS― QQ‐A-200/117075T6 AND10136… 2004 ARAE00002 STD SIZE IN FEE丁 2 Aluminium Extrusion AMS‐ QQ― A‐200/32024丁4 AND10135-0402 ARAE00003 STD SIZE IN FEET 3 Aluminium Extrusion AMS¨ QQ‐A-200/117075T6BELL STD 40-010-23 ARAE00005 STD SiZE IN FEET 4 Aluminium Extrusion AMS― QQ‐A-200/32024T4 AND10135‐ 0401 ARAE00006 STD SiZEIN FEET 5 Aluminium Extrusion AMS― QQ― A…200/32024T4 AND10133-0601 ARAE00007 STD SIZE IN FEET 6 Aluminium Sheet AMS‐ QQ― A‐250/42024T31.6002MM 丁HK ARAS00003 7 Aluminium Sheet AMS― QQ‐A-250/127075丁60.508MM THK ARAS00023 8 Alumlnium Sheet AMS― QQ―A-250/127075T60.635MM 丁HK ARAS00024 9 Aluminium Sheet AMS― QQ‐A-250/127075T6 0.8128MM ttHK ARAS00025 10 Aluminium Sheet AMS― QQ‐A-250/127075T61.016MM THK ARAS00026 11 Aluminium Sheet AMS‐ QQ‐ A…250/127075T61.27MM THK ARAS00027 12 Aluminium Sheet AMS‐ QQ‐ A…250/127075T6 1.6002ⅣllⅥ THK ARAS00028 13 Aluminium Sheet AMS― QQ―A-250/127075T6 1.8034MM THK ARAS00029 14 Aluminium Sheet AMS― QQ‐A-250/127075T62.032MM THK ARAS00030 ―/イh″ ⌒ |■||■||||■||||■|●|||| Ⅲ 一 ． 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 一 |||||||,ヽ

15 Aluminium Sheet AMS― QQ―A-250/42024T30.4064MM THK ARAS00031 16 Aluminium Sheet AMS― QQ‐ A…250/42024T30.635MM THK ARAS00032 17 Aluminium Sheet AMS‐ QQ‐A-250/42024T30.8128MM THK ARAS00033 18 Aluminium SheetAMS― QQ‐A-250/42024T31.016MM THK ARAS00034 19 Aluminium Sheet AMS― QQ‐A-250/42024T31.27MM THK ARAS00035 20 Aluminium Sheet AMS― QQ‐ A‐250/42024T31.6002MM 丁HK ARAS00036 21 Alunliniurn Sheet AMS4347 6013丁41.016MM ttHK ARAS00037 22 Alurniniurn Sheet AMS4027 6061 T6 1.27MM THK ARAS00038 23 Alurniniurn Sheet AVIS4347 6013 T4 2.032MA/1THK ARAS00039 24 Alurniniurn Sheet AMS4347 6013 T4 0.8128MM THK ARAS00041 25 Alurniniurn Sheet AMS4347 6013丁41.27MM THK ARAS00042 26 Alurninium Sheet AMS4027 6061 T6 0.635MM THK ARAS00043 27 Aluminium Sheet AMS4347 6013丁41.6MM THK ARAS00152 32 SS SHT AMS5518L― G3011/2HDO.508MM THK ARSS00001 33 SS SHT AMS5518L― G3011/2HDO.7874MM THK ARSS00002 34 SS SHT MIL―S-5059(AMS5518L)3011/2HDl.016MM THK ARSS00003 35 SS SHT AMS5518G 301 1/2HDl.6002MM THK ARSS00005 一た/フー ハ |IⅢ =● 1唸 ■ヽ■■|■|■ |11ち,1〔おお | |1豪|お

36 sS SHtt AMS5517L¨G3011/4HDO。8128MM THK ARSS00006 37 SS SHT MIL―S-5059 301 ANL(ALtt P No.AMS5901C ANL 301)0.635MM ttHK ARSS00007 38 SS SHT AMS5901 301 ANLl.6002MM THK ARSS00008 39 Titaniurn Sheet MIL― T-9046-comp B CPl ANLl.016 MM THK ARTS00001 40 Tltaniurn Sheet MIL― T‐9046¨Type l― comp B CPl ANLO.635R/1M THK ARTS00004 41 SS Bar AVIS5643 17-4PH ANL69.85MA/1THK′ ARSPBH407001 42 Titaniurn Sheet MIL― T‐9046¨Type l― comp B CPl ANLO.635'帆M THK ARTS00004 43 丁itaniurn Sheet― ANNEALED′ MIL―T-9046′ 丁Y― lCOMP BO.3048 ARTS0006 44 Titanium Sheet― ANNEALED′ NllL― T-9046′ ¬曰 r―:coMPBO.635 ARttS0007 45 Titaniurn Sheet― ANNEALED′ MIL―T-9046′ TY― lCOndP B o.8128 ARTS0008 46 丁itanium Sheet― ANNEALED′ MIL―T-9046′ TY―ICOMP BO.4064 ARTS00013 47 T:tanium Sheet― ANNEALED′ MiL―T-9046′ lY― :COMPBO.508 ARttS00014 48 Aluminium Sheet AMS― QQ―A-250/127075T61.016MM THK ARAS00026 49 Aluminium Sheet AMS― QQ‐A-250/42024T30.635MM THK ARAS00032 50 Aluminium Sheet AMS‐ QQ‐A-250/42024T31.6002MM THK ARAS00036 51 Alumin:um Sheet AMS‐ QQ‐A-250/127075T6 0.8128MM ttHK ARAS00025 52 Aluminium Sheet AMS― QQ‐A-250/127075T61.27MM THK ARAS00027 -3/負 ´ ⌒ 嫌 ・ 一 一 一 ・ 一 一 一 一 一 一 一 一 ヽ 一 ． 一 一 一 一 一 一 一 ・ 一 ・ 一 一 一 一 一 一 一 一 一 一 ・ 一 |■ Ⅲ ■藪 ■11111111tlllll =IT ||■■■■■|■ 轟 一 一 一 一 一 一 ´ 一 一 一

Aluminium Sheet′ 6013-丁4′ AMS 4347 1.016 MM THK′ ARAS00155 Aluminium Sheet′ 2024-T3′ AMS― QQ―A-250/40.8128 MM 丁HK′ ARAS00033 Aluminium Extrusion′ 7075-T6′ AMS― QQ‐A-200/11′ BELL STD 40‐010-85 STD SIZE′ ARAE00077 Aluminium Plate′ 7075-T7351′ AMS― QQ―A-250/1230.48 MM 丁HK′ ARAP00100 Alurniniurn Plate AMS4050 7050 T7451 44.45MM THK ARAP00067 Aluminium Plate AMS¨ QQ‐A-200/86061T651 139.7MM THK ARAP00073 Alurniniurn Plate AMS4050 7050 T7451 50.8MM ttHK ARAP00068 Alurninium Plate AMS4050 7050 T7451 38.lMM THK ARAP00071 Aluminium Plate AMS‐ QQ‐A-250/127075T7351 50.8MM ttHK ARAP00084 Aluminium Piate AMS― QQ‐ A…250/127075T7351 69.85NllⅥ THK ARAP00074 A:uminium Plate AMS― QQ―A-250/127075T7351 31.75MM THK ARAP00070 Aluminium Plate AMS― QQ―A-225/97075T651 44.45Mh/1ttHK ARAP00072 勺 ′ 〃諄ノ/ ル ⌒ ノ イ な つりいη多 4″ /彎 4) 一 一負/t― 53 54 55 56 57 | 58 59 60 61 62 63 64 |■|||■|||||1111tlllllヽ|ヽ|||