IN FORCE Norms Committee — Textiles & Leather (NC-V) Advance Authorisation 2019-06-20

DGFT Committee Minutes

Document text

Directorate General of Foreign Trade Udyog Bhawan DES-V Section The Meeting NO.061 AM-20 dated 20.06.2019 for the licensing year 2019-20 to considered the Special Advance Authorisation cases under para 4.04(a) FTP 2015-20 actually held on 09.07.2019 and remaining cases to considered on 13.08.2019, under

para 4.7 FTP 2015-20,

Duty Exemption Schemes (Chapter-4) in Conference Room N 4 fDGFT d h Ch hi fSh' K C R Addl DGFT TI ~ II ffi o. 0 un er t e airrnans IP 0 n out, le 0 oWing 0 icers were presenr- S.No. Name of the representatives and their designation Department I Dr. Ram Asrey Lal, Sr. General Manager AT&DC 2 Shri J.D. Giri, Vice President AEPC 3. Shri S.K.Mohapatra, DDG DGFT 4. Shri Manoj Kumar Meena, Asst. Director DGFT The agenda for meeting No. 06/84 dated 20.06.2019 and the decision taken in respect of each case is enumerated below MEETING NUMBER : 6/84-ALC3/2019 MEETING DATE: 20.06.2019 ICase No.: 2 7/23/80- ALC2/2016 IPart-y Name: PETERS

!SURGICAL INDIA PVT. ILTD.

ile /RLA File 010501005301 AM 171 :05/24/0401003681 AM 171 -----, ,Status: Deferred I 'Meet NoIDate:6/84- IALC3/20 19 120.062019 ,--------------------- ILic.No/Date:051 04007091Defer Date: 113.12.2016 112.09.2019 Decision :Committee considered the case as per agenda along with other relevant papers and noted that the, firm was asked on 15.07.2019 to furnish the following: I I 1. To indicate import content separately in each export product I 2. Complete calculation for requirement of raw materials Icomponents for the manufacture of export! , item, separately indicating wastage of each raw material I No reply received so far. Committee decided to remind the firm. IThe case stands deferred for re-listing on 12.09.2019. 1 ~I!case No.: 13/10/85-ALC3/201 7 Party Name:MANGLAM IMeet No/Date:6/84- ~tat~s~ ARTS IALC3120 19 IAPPROVED I i 12006.2019 I rHQ File

iRLA File ILicNolDate: 1310048805--1-

1:01/85/0501001341 AM 181 113124/040/000421 AM 18/ II 1.12.2017 ! \2 I 1



..

--, Decision: Committee considered along with other relevant papers and noted that firm's I representative had appeared alongwith documents before NC on 30.07.1019 and explained their casco After detailed deliberation, Committee decided to ratify the norms as per amendment sheet issued by RA Jaipur on, 08.05.2018 for the above advance authorization as under: ; S.No. Export Product Export Import item Quantity allowed Quantity I. COTTON POUF 520.000 2. 34% COTTON, 30% 1.02 Sq. Meter/ Contents of Cotton Number VISCOSE, 24% LINEN, 7% per piece Velvet 867 Meters BAMBOO, 5% PA WITDH 140 CM, GSM 514.29 I 2. WOODEN STOOL 135.000 I. 100% COTTON VELVET 1.94 Sq. Meter' I UPHOLSTRED Number WITDH 140 CM GSM 459.18 per piece ! Contents of Cotton I Velvet 195.48 Meters I 3. WOODEN CHAIR 93.000 I. 100% COTTON VELVET 2.23 Sq. Meter/ I UPHOLSTERED Number WITDH 140 CM GSM 459.18 per piece I I Contents of Cotton I Velvet 176.70 Meters . . ! i I ; IRA concerned may take necessary actIOn subject to compliance of other usual condllions . 1

'Party Name GOKALDAS

iMe~ N-o-I-D-a-te-:-6/-8-4----:Status: Deferred ' EXPORTS LTD \ALC3/20 19 120062019


I ---I I Case No.:266/24/84- ..,4. ALC3/20 18 HQ File 3 :01/84/0501006901 AM 191 RLA File :07/24/040100329/AM 181 LicNo/Date:07101128671Defer Date: 23 .02.20 18 12.09.2019

. - I Decision: Committee considered and observed that firm was asked on IS.07 .2019 to 1 I furnish the CAD/metrics of requirement of each input per piece of export product and complete two sets ofl . [ appl ication for fixation of adhoc norms. I !RePIY is not received so far. NC decided to remind the firm. 1_,T_h_e_c_a_s_e_s_ta_n_d_s_d_e_~r_re_d~o_r_r_e-11' s_ti_n_g_o_n_I_2.0_9 __.2_0_1 9. J -"C-a-s-e -N-o-.:-2-6-71-2-4-/8-4------- r-p-a-rt-Y-N-a-m-e-:-G-O-K-A-L-D--A-S--I Meet N o/Date: 6/84- IStatus: De ferred I ALC3/2018 EXPORTS LTD IALC3/2019 ' 1 120.06.2019 I 'H-Q--F-iI-e----------------- 'I R-L-A--F-i-Ie-------- ------1 Lic. No/Date :07 I0 I 12869 rID-e-~-el-' D-at-e: :0 1/84/050/006911 AM 191 :07/24/040/00313/ A M I81 \23.02.2018 112.09.2019

Decision: Committee considered along with other relevant papers and observed that I 4 the firm was subrn itted the CAD with appl ication on 05.06.2019 for fixation or adhoc norms against the above said Adv. Authorisation. After detailed deliberation, Committee decided to the applicant may be given I the following information: ' I. Matrix for requirement or each input per piece item, each export product wise. 2. CAD ror each export product separately for each input fabric giving marking length marking width & bundle (Garment pieces) covered under the given CAD. The case stands deferred for re-listing on 12.09.2019. ,-,.----------------------r---------------------- I Case No.:268/24/84- Party Name:GOKALDAS Meet No/Date:6/84- I'status: Deferred ALC3/2018 EXPORTSLTD ALC312019 , I 120.06.2019 I I Ir-H-Q-F-i le--------- RLA Fi Ie r-! L-ic-.N-o-I-D'-a-te-:0-7-1-0-1 -12-8-7-11 r-:D-e-fe-r-D-a-te: I 1:01/84/0S0/00692/AM191 :07/24/040/00334/AM181 123.02.2018 112.09.2019 I IDecision: Committee considered along with other relevant papers and observed that I 5 the firm was submitted the CAD with application on OS.06.20 19 for fixation of adhoc norms against the I above said Adv. Authorisation. After detailed deliberation. Committee decided to the applicant may be given I the following information: I I. Matrix for requirement of each input per piece item. each export product wise. 2. CAD for each export product separately for each input fabric giving marking length marking width & I bundle (Garment pieces) covered under the given CAD. IThe case stands deferred for re-listing on 12.09.2019. ~------------------------------------------------------------------------------- ~ ,- IStatus:

  • 1 Case No.:272124/84- Party Name:GOKALDAS IMeet No/Date:6/84- Deferred ALC3/2018 EXPORTS LTD ALC3/2019 I I 120.06.2019 I IHQ File RLA File ILic.No/Date:0710 112903iDefer Dat~--:- -i :0 1/84/0S01006961 AM 191 :07/24/040100338/AM 181 101.03.2018 112.09.2019 I 6 Decision: Committee considered along with other relevant papers and observed that i the firm was submitted the CAD with application on OS.06.20 19 for fixation of adhoc norms against the above said Adv. Authorisation. After detailed deliberation, Committee decided to the applicant may be given the following information: I. Matrix for requirement of each input per piece item. each export product wise.

CAD for each export product separately for each input fabric giving marking length marking width & bundle (Garment pieces) covered under the given CAD. I I for re-listing on 12.09.2019. I !Status: APP~~ Ficase No.:269/24/84- Iparty Name:GOKALDAS IMeet No/Date:6/84- ~2

rlALC3/2018 IEXPORTS LTD
ALC3/2019 20.06.2019 I I RLA File---'ILicNo/Date:0710112942i- I .- :0_7_/2_4_10_4_0_IO_O_34_6_/A_M I_8/ 0_9.0_3.2_0_18 1 1 Decision: Committee considered the case as per agenda and other relevant papers and decided to ratify the I norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance of o_th_e_r_u_su_a_l_c_o_nd_i_ti_o_ns_. J HQ File :01/84/0501006931 AM 191 'I

Case No.:27 1124/84-

ALC3/2018 I Meet No/Date:6/84- ALC3/20 19 20.06.2019 Party Name:GOKALDAS EXPORTS LTD Status: Deferred Ir-L-ic-. N-o-I-D-a-te-: 0-7-1-0-1 -12-9-4-3IIDefer Date: 109.03.2018 12.09.2019 IRLA File 1:07/24/040100345/AM 181 HQ File :01/84/050100695/AM 191 Decision: Committee considered the case as per agenda along with other relevant papers and observed that 8 the firm was submitted the CAD with application on 05.06.2019 for fixation of adhoc norms against the above said Adv. Authorisation. After detailed deliberation, Committee decided to the applicant may be given the following information: 1 I. Matrix for requirement of each input per piece item, each export product wise. 2. CAD for each export product separately for each input fabric giving marking length marking width & bundle (Garment pieces) covered under the given CAD. The case stands deferred for re-listing on 12.09.2019. j icase No.:9 1124/84- Party Name:SURE SAFETY IjMeetNo/Date:6/84- I ALC3/2018 INDIA PYT LTD ALC3/2019 20.06.2019 I HQ File IRLA File Ir-L-ic-.-N-o-ID-a-t-e-: 3-4-1-00-4-3-9-5-9 IDefer Date: 19 :01/84/0501005151 AM 191 1:34/24/040100370/ AM 181 .! 1203 .2018 !1209.20 I~_ Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee noted that I the firm was asked on 15.07.2019 to furnish the complete two sets of application alongwith copy of Adv.: Authorisation. Reply is not received so far. NC decided to remind the firm. 1I The case stands deferred for re-listing on 29.08.2019. -.-----------'-----------\

Case No.:270/24/84-

Party Name:GOKALDAS Meet No/Date:6/84- ALC3/2018 EXPORTS LTD ALC3!2019 [20.06.2019 IStatus: Deferred i _i IIRLA File

--'-ILicNo/Date:0710-1-12-9-88-IDefer Date: :07/24/040100347/AM181 120032018 JI2092019 ,-----------~-----------~--------~------I Decision: Committee considered the case as per agenda along with other relevant papers and observed that 1 10 the firm was submitted the CAD with application on 05.06.2019 for fixation of adhoc norms against the 1 above said Adv. Authorisation. After detailed deliberation. Committee decided to the applicant may be 1 given the following information: I I. Matrix for requirement of each input per piece item. each export product wise. i 2. CAD for each export product separately for each input fabric giving marking length marking width & II bundle (Garment pieces) covered under the given CA D. j HQ File :0 1/84/0501006941 AM 191 -'C-a-s-e-N-o-.:-7-2-/2-4-/8-4------ 'P-a-rt-y-N-a-m-e-:-A-M-B-I K-A---- 'I M-e-e-t-N-o-I-D-at-e-:6-1-84-----IStatus: Clo;e-- -I ALC3/2018 COTTON MILLS LIMITED, IALC3/2019 12006.2019 I ,-----------,----------- ,------ IRLA File iLic.No/Oate:3210078437 'I 1:32/24/0401000631 AM 181 127.03.2018 II HQ File :0 1/84/050100496/AM 191 Decision: Committee considered the case as per agenda and observed that firm was furnished their reply on II 16.07.2019 alongwith relevant documents and request to close the case as they paid duty in respect of the __ ........J $v3 ~

imports made under the above authorisation and cancelled the bond by the Customs. NC decided to close 1 the case. ~ ~

~IMeet No/Date:6/84- [status: APPROVED -I Case No.:73/24/84- Party Name:KKP ALC3/2018 SPINNING MILLS ALC3/2019 PRIVATE LIMITED 120.06.2019 I I i

ILicNo/Date:321 0078440 I

I HQ File RLA File ! :01/84/0501004971 AM 191 :32/24/040100058/AM 18/ 103.04.2018 I Decision: Committee considered alongwith other relevant papers and went through 12 the details submitted in this case and decided to ratify norms the above said Advance Authorization issued in 1 this case as under: Export item: Woven Fabric I Quantity: 142857.000 KG Import Items: Lenzing Viscose Staple Fibre bright Rawwhite Lenzing Micro Modal Edelweiss Technology ! Brand 1.0 Dtex/34 MM Quantity: 158500.70 KG RA concerned may take necessary action subject to compliance of other usual conditions.

"" Deferredi Case No.:273/24/84- Party Name:GOKALDAS Meet No/Date:6/84- ALC3/2018 EXPORTS LTD ALC3/2019 20.06.2019 I ! HQ File RLA File Lic.NolDate:071 0 I 13059 IDefer Date: :01/84/0501006971 AM 191 :07124/0401003641 AM 181 05.04.2018 112.09.2019 13 Decision: Committee considered along with other relevant papers and observed that the firm was submitted the CAD with application on 05.06.2019 for fixation of adhoc norms against the I above said Adv. Authorisation. After detailed deliberation, Committee decided to the applicant may be i given the following information: I. Matrix for requirement of each input per piece item, each export product wise. 2. CAD for each export product separately for each input fabric giving marking length marking width & bundle (Garment pieces) covered under the given CAD. for re-listing on 12.09.2019.

I Case NO.:74/24/84- Party Name:ADITY A IMeet No/Date:6/84- Status: Deferred ! ALC3/2018 TIMPACK PRIVATE ALC3/2019 I LIMITED 12006.2019 14 HQ File RLA File !ILiC.No/Date:52I 0042587 Defer Date: :0 I184/0501004981 AM 191 :52/2410401000051 AM 191 06.04.2018 12.09.2019 Decision: Committee considered along with other relevant papers and case pertains to DPIIT. Committee decided to defer the case for re-listing on 29.08.2019. I IParty Name:K H EXPORTS tMeet No/Date:6/84- IStatus: Approved I IINDIA PRIVATE LIMITED, ALC3/20 19 I 1 I 20.06.2019 r-H-Q-Fi-Ie-------- rR-L-A-F-ile-------- Lic.No/Date:041 0 164239 ' _I :01/84/050100500/AM191 :04/24/040100010/AM191 23.04.2018 I Case No.:76/24/84- ALC3/2018 4

J I SNo litem Description IUOM I To" I Q~ II Decision: Committee considered alongwith other relevant papers and went through the details submitted in this case and decided to ratify the Advance Authorization issued in this case as per written comments of DPIIT dated 24.06.2019, the following norms are recommended: EXPORT MADE ITEM NO. 1:- "Cow Leather Belts" QTY (In STYLE Nos) FI2026 10,000 FI2027 8,000 FI2153 1.000 FI2189 1,000 F55157 13,000 F55434 5,000 F64824 7,000 F64840 18,000 F64842 8,000 F65185 8,000 F65186 3,000 27099 3,000 TOTAL 85,000 S.No. Item Description UOM Total Qry I COW FINISHED LEATHER Sq. foot 6551.10 REINFORCEMENT MATERIAL of Relevant Thickness 9 (NON WOVEN LINING O.4MM, 0.6MM, 0.8MM, I MM & 1.5MM) Yard 1025.70 12 REINFORCEMENT MATERIAL (210 D & 420 D NYLON) Yard 110.70 13 REINFORCEMENT MATERIAL (1.5MM BONDED LEATHER BOARD CHAMAR CHARME S P+ I B) Sq. meter 5333.20 15 BUCKLE (METAL FITTINGS BUCKLE) Numbers Net to Net 25 LEATHER AUXILIARY (POLISHES, EDGE STAIN) K.G 644.20 26 PRIMER POLISHES DA550 I CA220 I UA400H (PRIMER POLISHES EDGE STAIN) K.G 580.90 28 SILICA GEL (PACKING MATERIAL) Numbers Net to Net 29 PRINTED POLY BAG POLYETHYLENE (PACKING MATERIAL) Numbers Net to Net 30 PACKING GIFT BOX NON CORRUGATED (PACKING MATERIAL) Numbers Net to Net 31 PACKING INSERT BOX (PACKING MATERIAL) Numbers Net to Net EXPORT MADE ITEM NO. 2:- "COW LEATHER BELTS COMBINATION WITH PVC MATERIALS" STYLE QTY (In Nos.) 64077 1,000 64084 1,000 F22540 18,000 TOTAL 20,000 Ji-s

I OUTER LINING (10.6CM SIG C LUXE PEBBLE 2 EMBOSS NO SCRIP-50/50 TC BLEND PLAIN WEAVE MTR 108 WIDTH-S4") OUTER LINING (BELT VERTICLE 12CM LW PVC S REPS PEBBLE EMBSS

  • POLY/CTN NON BRUSH MTR 1139.4 TWILL WIDTH-S4") 13 REINFORCEMENT MATERIAL (I.SMM BONDED SQMTR 1287 LEATHER BOARD (CHAMAR CHARME S P+l B) IS BUCKLE (METAL FITTINGS BUCKLE) NOS Net to Net 25 LEATHER AUXILIARY (POLISHES EDGE STAIN) KGS 162.8 26 PRIMER POLISHES DAS50 / CA220 I UA400H (PRIMER KGS 143.6 POLISHE EDGE STAIN) I I 28 SILICA GEL (PACKING MATERIAL) NOS Net to Net 29 PRINTED POLY BAG POLYETHYLENE (PACKING NOS Net to Net MATERIAL) 30 PACKING GIFT BOX (NON CORRUGATED) NOS Net to Net (PACKING MATERIAL) 31 PACKING INSERT BOX (PACKING MATERIAL) NOS Net to Net EXPORT MADE ITEM NO. 3:- "PYC HAND BAGS" I STYLE QTY (In Nos.) FS4788 15,500 F54774 10400 F26068 1,700 F37468 1,700 TOTAL 20,300 I S.No. Item Description UOM Total Qty 1 COW FINISHED LEATHER SQFT 34554.85 3 OUTER L1NING(12CM LIGHTWEIGHT PYC REPS MTR 522.75 PEBBLE EMBOSS
  • POLY/CTN NON BRUSH TWILL WIDTH-54") I 4 OUTER L1NINGI2CM PRINTED PYC 1.25MM W/TOP MTR 2666.65 I COATING -6000 CANY AS WIDTH-54" 7 INNER L1NING(ASIAN FAILLE
  • WR + IX CLEAR PU YARD 9904.78 COATING / 100% POL Y 750 WIDTH-56") WEBBING(40MM & 25MM 100% NEW WEAVE SOLID 8 REFINED POLYESTER WEBBING 119MM W-13101-01 MTR 64069 WEBBING) ~6

REINFORCEMENT MATERIALNON WOVEN LINING I 9 of Relevant Thickness(O.4MM, 0.6MM, 0.8MM, IMM & YARD 2168.77 I 1.5MM) REINFORCEMENT MATERlALBONDED LEATHER 10 BOARD of Relevant Thickness (0.3MM, O.4MM, 0.6MM, MTR 617.52 0.8MM & I.SMM) II REINFORCEMENT MATERIAL(MICRO FIBER SOFT MTR 203.05 NON WOVEN) (width 56.5 inches) REINFORCEMENT MATERIAL(210 D & 420 D i 12 YARD 1157.62 I NYLON) (width 60 inches) I 14 REINFORCEMENT MATERIAL(FEL T. SR 09/10 NON SQMTR 147.25 ADHESIVE) 16 METAL FITTING(DOG LEASH / DOG HOOK I METAL NOS Net to Net ACCESSORIES) METAL FITTING(D RING I RECTANGULAR 17 CONNECTOR I ZIPPER PULL I METAL SLIDER I NOS Net to Net I METAL FITTING) 18 METAL FITTING(BALL CHAIN I D RING I METAL NOS Net to Net FITTING) ZIP FASTENER(ZIP FASTENER (ANTIQUE SILVER I 20 ZIP I NICKLE ZIP I NYLON ZIP) (width 12 mrn, 14mm & MTR 7628 i 16 mm) 21 SLI DERSLI DER NOS Net to Net 22 STOPPER (STOPPER) NOS Net to Net 23 STOPPER (STOPPER) SET Net to Net 24 SNAP BUTTON (SNAP BUTTON MAGNETIC SNAP SET Net to Net BUTTON METAL FITTING) I 25 LEATHER AUXILIARY (POLISHES I EDGE STAIN) KGS 96.38 26 PRIMER I POLISHES DA550 I CA220 I UA400H KGS 166.98 (PRIMER POLISHES EDGE STAIN) 27 WATER BASED ADHESIVE (WATER BASED KGS 108.68 ADHESIVE P-560) 28 SILICA GEL (PACKING MATERIALS) NOS Net to Net 29 PRINTED POLY BAG POLYETHYLENE (PACKING NOS Net to Net MATERIAL) EXPORT MADE ITEM NO. 4:- "PVC SATCHEL BAGS" I STYLE QTY (In Nos.) F31295 2,500 F31557 5,200 F36813 2,000 TOTAL 9,700 S.No. Item Description UOM Total Qty 1 COW FINISHED LEATHER SQFT 17,889.75 7

J OUTER LINING (12CM LIGHTWEIGHT PVC REPS 3 PEBBLE EMBOSS

  • POLY/CTN NON BRUSH TWILL MTR 783.35 WIDTH-54") 6 OUTER LINING (45.7 CM WILD CAMO ORIGINAL MTR 1,396.72 PEBBLE PVC - 600D CANV AS WIDTH-54") 7 INNER LINING (ASIAN FAILLE
  • WR + IX CLEAR PU YARD 8,776AO COATING 1 100% POL Y 75D WIDTH-56") WEBBING (40MM & 25MM 100% NEW WEAVE SOLID 8 REFINED POLYESTER WEBBING 1 19MM W-13101-01 MTR 11,543 WEBBING) REINFORCEMENT MATERIAL of Relevant Thickness 9 (NON WOVEN LINING (OAMM, 0.6MM, 0.8MM, I MM YARD 3,962.78 & 1.5MM) (width 59.5 inches) REINFORCEMENT MA TERIAL of Relevant Thickness 10 (BONDED LEATHER BOARD (0.3MM, OAMM, 0.6MM, MTR 286.94 0.8MM & 1.5MM) (width 59 inches) 12 REINFORCEMENT MA TERIAL (210 D & 420 D NYLON YARD 1,625 16 METAL FITTING (DOG LEASH 1 DOG HOOK 1 METAL NOS Net to Net ACCESSORIES) METAL FITTING (D RING 1 RECTANGULAR 17 CONNECTOR 1 ZIPPER PULL 1 METAL SLIDER 1 NOS Net to Net METAL FITTING) 18 METAL FITTING (BALL CHAIN 1 DRING 1 METAL NOS Net to Net FITTING) 19 ZIP FASTENER (ZIP FASTENER
  • CUT ZIP NOS Net to Net (VISLON ZIPPER) 20 ZIP FASTENER (ZIP FASTENER (ANTIQUE SILVER MTR 3.848 I ZIP 1NICKLE ZIP 1NYLON ZIP) 21 SLIDER (SLIDER) NOS Net to Net 24 SNAP BUTTON (SNAP BUTTON MAGNETIC SNAP SET Net to Net BUTTONMETAL FITTING) 25 LEATHER AUXILIARY (POLISHES, EDGE STAIN) KGS 38.92 PRIMER 1 POLISHES 26 (DA550 1CA220 1 UA400H) (PRIMER POLISHES EDGE KGS 95.03 STAIN) 27 WATER BASED ADHESIVE (WA TER BASED KGS 206A8 ADHESIVE P-560) 28 SILICA GEL (PACKING MATERIAL) NOS Net to Net 29 PRINTED POLY BAG POLYETHYLENE (PACKING NOS Net to Net MATERIAL) RA concerned may take necessary action subject to compliance of other usual conditions. ,.- Status: Deferred Case No.:78/24/84- Party Name:VRIJESH Meet No/Date:6/84- ALC3/2018 OVERSEAS PRIV ATE ALC3/20 19 LIMITED 20.06.2019 HQ File RLA File Lic.No/Date:0710113173 Defer Date: :0 I184/0501005021 AM 191 :07/24/0401000121 AM 19/ 24.04.2018 12.09.2019 16 Decision :Committee considered and observed that the firm was asked on 16.07.2019 to furnish the following information: I. The requirement of yarn is given in KG, the weight of final garment is required

CAD, Sketch and Measurement Chart. 3. Complete two sets of application for fixation of adhoc norms. Reply is not received from the firm so far. NC decided to send the final reminder. The case stands deferred for re-listing on 29.08.2019.

Case NO.:79124/84- Party Name:GOKALDAS Meet No/Date:6/84- Status: Deferred ALC3/2018 EXPORTS LTD ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:071 0 11321 I Defer Date: 17 :0 1/84/0501005031 AM 191 :07/24/0401000131 AM 191 01.05.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 16.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to send the reminder. for re-listing on 12.09.2019.

Status:Approved I Case No.:80/24/84- Party Name:GOKALDAS Meet No/Date:6/84- ALC312018 EXPORTS LTD ALC3/2019 20.06.2019 18 HQ File RLA File Lic.No/Date:0710113294 :01184/0501005041 AM 191 :07/2410401000361 AM 191 16.05.2018 I~ecision: Committee considered and other relevant papers and decided to ratify the Inorms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance i r-- Case No.:81/24/84- Party Name:OPERA Meet No/Date:6/84- Status: Deferred ALC3/2018 GLOBAL PRIVATE ALC3/20 19 LIMITED 20.06.2019 HQ File RLA File Lic.No/Date:0510406668 Defer Date: 19 :01/84/0501005051 AM 191 :05/24/0401001201 AM 191 29.05.2018 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee noted that the firm was asked on 16.07.2019 to furnish the complete alongwith copy of. Adv. Authorisation. so far. NC decided to remind the firm. I The case stands deferred for re-listing on 12.09.2019.

I Case No.:82/24/84- Party Name:GOKALDAS Meet No/Date:6/84- Status: Deferred ALC3/2018 EXPORTS LTD ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:071 0 113361 Defer Date: 20 :0 I184/0501005061 AM 191 :07/24/0401000541 AM 191 29.05.2018 12.09.2019 Decision: Committee considered along with other relevant papers and observed that the firm was submitted the CAD with application on 05.06.2019 for fixation of adhoc norms against the above said Adv. Authorisation. After detailed deliberation, Committee decided to the applicant may be given the CAD for both the inputs. The case stands deferred for re-listing on 12.09.2019. r-- Party Name:ASHUTOSH Meet No/Date:6/84- Status: Close I Case No.:83/24/84- I ALC312018 FIBER PVT. LTD. ALC312019 20.06.2019 21 HQ File RLA File Lic.No/Date:081 0 142746 :0 I184/0501005071 AM 191 :08/2410401000361 AM 191 06.06.2018 Decision: Committee considered and observed that the firm was furnished their reply on 20.07.2019 and stated that the above said Authorisation was obtained under

para 4.12 of HBP (on repeat

basis). Committee decided to close the case. Party Name:GRASIM Meet NO/Date:6/84-ALC3/2019!Status: Deferred INDUSTRIES LTD. 20.06.2019 Ir"R-L-A-F-i-Ie------ILic.NolDate:341 0044214 F Case No.:86124/84- ALC3/2018 IDefer Date: IHQ File 9

I 1:01/84/0501005101 AM 191 1~34/24/040100029/AM 18T "107 .06.20 18 -I. 112.09.2019 Decision: Committee considered on 16.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to send the reminder. The case stands deferred for re-listing on 12.09.2019. ,--- IStatus: Deferred Case No.: 122/24/84- Party Name:SCHOELLER Meet NolDate:6/84- ALC3/2018 TECHNOLOGIES INDIA ALC3/20 19 PVT. LTD. 20.06.2019 1I HQ File RLA File Lic.No/Date:031 08219041Defer Date: 23 :0 I184/0501005461 AM 191 :03/951040100284/ AM 191 26.06.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 16.07.2019 to furnish the CAD, Sketch and Measurement Chart and complete for fixation of adhoc norms. so far. Committee decided to send the reminder. The case stands deferred for re-listing on 12.09.2019. ~ IStatus: APPROVED Case No.:89/24/84- Party Name:PRAFFUL Meet No/Date:6/84- ALC3/2018 OVERSEAS PVT. LTD ALC3/2019 20.06.2019 1 HQ File RLA File Lic.No/Date:52I 0042688 I :0 I184/0501005131 AM 191 :52/2410401000281 AM 191 05.07.2018 I Decision: Committee considered alongwith other relevant papers and went through the details submitted to ratify the norms for the above advance authorization as 24 under: S.No. Export Product Export Import item Quantity allowed Quantity I. Nylon Filament Yarn (HS 85000 Nylon Chips 88400 Kg I Codes 54023100 & KG (HS code 29081090) 54023200) Spin Finish Oil (HS 850 Kg Code 3403 I 100) RA concerned may take necessary action subject to compliance

Status:Approved 1 Case No.:90/24/84- Party Name:GOKALDAS Meet No/Date:6/84- ALC3/2018 EXPORTS LTD ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:0710113550 25 :01/84/050100514/AM 191 :07/24/0401000891 AM 19/ 09.07.2018 Decision: Committee considered and other relevant papers and decided to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance ,-- Case No.:93/24/84- Party Name:ARVIND Meet NolDate:6/84- Status: Deferred ALC312018 LIMITED ALC3/2019 20.06.2019 HQ File RLA File ILic.No/Date:081 0 143105 Defer Date: :01/84/0501005171 AM 191 :08/241040100070/ AM 19/ 125.07.2018 12.09.2019 26 Decision: Committee considered on 17.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to ask the firm to furnish the following: I. Content of input in the export product alongwith the wastage asked for each input 2. Complete for fixation of adhoc norms The case stands deferred for re-Iisting on 12.09.2019.

I Case No.:94124/84- Party Name:S.K. EXPORTS ~eet No/Date:6/84- Status: Deferred ALC3/2018 LC3/2019 120.06.2019 HQ File RLA File ILic.No/Date:0610038933 Defer Date: 27 :0 I184/050/005181 AM 191 :06/241040/000 19/AM 191 31.07.2018 12.09.2019 Decision: Comm ittee considered and noted that the firm was asked on 17.07.2019 to furnish the CAD, Sketch and Measurement Chart and complete for fixation of adhoc norms. so far. Committee decided to send the reminder. for re-listing on 12.09.2019. I

I Case No.:9S!24/84- Party Name:SCANPACK Meet No/Date:6/84- Status: Deferred ALC312018 GLOBAL ALC3/20 19 I 20.06.2019 I HQ File RLA File Lic.No/Date:5610005457 Defer Date: 28 :0 I184/0501005191 AM 191 :56/21/0401000591 AM 191 03.08.2018 12.09.2019 Decision: Committee considered on 16.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to send the reminder. for re-listing on 12.09.2019. r- Case No.:96/24/84- Party Name:UVlRAJ Meet No/Date:6/84- Status: Deferred ALC3!2018 GLOBAL PRIVATE ALC3/2019 LIMITED 20.06.2019 HQ File RLA File Lic.No/Date:0610038938 Defer Date: :0 I184/0501005201 AM 191 :06/2410401000221 AM 191 06.08.2018 12.09.2019 29 Decision: Comm ittee considered and noted that the firm was asked on 17.07.2019 to furnish the following: I. Total weight of inputs as well as export product separately 2. Norms to be fulfilled on basis of quantity of weight 3. Complete for fixation of adhoc norms. so far. Committee decided to send the reminder. for re-Iisting on 12.09.2019. r- I Case No.:97/24/84- Party Meet No/Date:6/84- Status: Deferred ALC3/2018 Name:G.R.CORPORATION ALC3/20 19 20.06.2019 HQ File RLA File Lic.NolDate:0610038944 Defer Date: :01/84/0501005211AM 191 :06/24/040100025/AM 191 10.08.2018 12.09.2019 30 Decision: Committee considered on 17.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to ask the firm to furnish the following: I. Applicant may clarify when weight of input and content of that input is same in both the export product. How 2% waste is 2. Complete for fixation of adhoc norms. for re-I isting on 12.09.2019. I ~ Case No.:98/24/84- ALC3/2018 I HQ File :0 I184/0501005221 AM 191 Party Name:TODI RA YONS PVT. LTD. Meet No/Date:6/84-ALC3/20 19 20.06.2019 Status: APPROVED RLA File :52/24/0401000401 AM 19/ Lic.No/Date:52I 0042731 14.08.2018 ~ 11

I Decision: Committee considered alongwith other relevant papers and went through ) the details submitted in this case and decided to ratify the norms for the above advance authorization as under: S.No. Export Product Export Import item Quantity allowed Quantity I. Draw Texturised Yarn 1 Air 140.000 I. Nylon 6 Chips 154.28 MT Texturised Yarn of Nylon MT (300 Denier & below) 2. Spin Finish Oil 1.4 MT RA concerned may take necessary action subject to compliance ,-- I Case No.:99/24/84- Party Name:FLEXITUFF Meet No/Date:6/84- Status: Deferred I ALC3/2018 INTERNATIONAL LTO ALC3/2019 I 20.06.2019 I HQ File RLA File Lic.No/Date:56I 0005461 Defer Date: :0 I184/0501005231 AM 191 :56/24/0401000181 AM 191 17.08.2018 12.09.2019 32 Decision: Committee considered and noted that the firm was asked on 17.07.2019 to furnish the following: I. Manufacturing process, indicating stage-wise wastage with Sketch of the export product. 2. Complete two sets of appl ication for fixation of adhoc norms. Reply has been received. Committee I decided to send the same to DPIIT for their comments. for re-listing on 12.09.2019. I

Case No.: 100/24/84- Party Name:COTTON Meet No/Date:6/84- Status:Approved ALC3/2018 WORLD ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0710113749 I 33 :0 I184/0501005241 AM 191 :07/24/0401001341 AM 191 23.08.2018 I Decision: Committee considered alongwith other relevant papers and went through the details submitted in this case and decided to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance ,-- Status: Approved I Case No.: I 03/24/84- Party Name:TODI RA YONS Meet No/Date:6/84- ALC3/2018 PYT.L TO. ALC3/2019 I 20.06.2019 HQ File RLA File Lic.No/Date:52I 0042738 :0 1/84/050100527/AM 191 :52/24/040100041/AM 191 23.08.2018 Decision: Committee considered alongwith other relevant papers and went through 34 the details submitted in this case and decided to ratify the norms for the above advance authorization as under: S.No. Export Product Export Import item Quantity allowed Quantity I. Draw Texturised Yarn / Air 151.000 I. Nylon 6 Chips 166.40 MT Texturised Yarn of Nylon (300 MT 2. Spin Finish Oil 1510 Kg Denier & below) RA concerned may take necessary action subject to compliance

Meet No/Date:6/84- Status: Deferred I Case No.: 104/24/84- Party Name:ARYIND ALC3/2018 LIMITED ALC3/20 19 35 20.06.2019 HQ File RLA File Lic.NolDate:0810143340 Defer Date: :01/84/0501005281 AM 191 :08/24/040100039/AM 191 28.08.2018 12.09.2019 12

I-. Decision: Committee considered alongwith other relevant papers and went through the details submitted to ask the firm to furnish the content of input in the export product and percentage wastage of each input claimed. for re-listing on 12.09.2019. r-- Case No.: 163/24/84- Party Name:ARVIND Meet NolDate:6/84- Status: Deferred ALC3/2018 LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0810143350 Defer Date: 36 :01/84/0501005871 AM 191 :08124/0401000321 AM 191 28.08.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and went through the details submitted to ask the firm to furnish the content of input in the export product and percentage wastage of each input claimed. for re-listing on 12.09.2019.

Case No.:4117/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/20 19 20.06.2019 37 HQ File RLA File Lic.NolDate:34I 0044462 Defer Date: :0 I184/0501002971 AM 191 :34/241040100 138/AM 191 30.08.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and went through the details submitted to send the application to DPIIT for their comments. for re-listing on 12.09.2019. r- Case No.: 105/24/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:341 0044459 Defer Date: 38 :01/84/0501005291 AM 191 :34124/040100 135/AM 191 30.08.2018 12.09.2019 Decision: Committee considered on 17.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to remind the firm. for re-listing on 12.09.2019. r-- Case No.: 106/24/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/20 19 20.06.2019 HQ File RLA File Lic.NolDate:34I 0044461 Defer Date: 39 :0 I184/0501005301 AM 191 :34/241040100 137/AM 191 30.08.2018 12.09.2019 Decision: Committee considered on 17.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to remind the firm. for re-listing on 12.09.2019. r- Case No.:6/17/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/20 19 20.06.2019 40 HQ File RLA File Lic.No/Date:34I 0044467 Defer Date: :01/84/0501002991 AM 191 :34/24/0401001661 AM 191 31.08.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and went through the details submitted to send the application to DPIIT for their comments. for re-listing on 12.09.2019. ~3

')

Case No.: 5/17/84-

Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/2019 20.06.2019 41 HQFile RLA File Lic.No/Dale:34I 0044471 Defer Date: :0 I184/0501002981 AM 191 :34/24/0401001741 AM 191 04.09.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and went through the details submitted to send the application to DPIIT for their comments. for re-listing on 12.09.2019. r- Case No.: 108/24/84- Party Name:SHAMIMSONS Meet NolDate:6/84- Status: Deferred ALC3/2018 INTERNATIONAL ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:0610038968 Defer Date: 42 :01/84/050100532/AM191 :06/24/0401000301 AM 191 06.09.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 17.07.2019 to furnish the CAD, Sketch and Measurement Chart alongwith complete for fixation of adhoc norms. so far. Committee decided to ask the firm to furnish the CAD and Image and Complete for fixation of adhoc norms. for re-listing on 12.09.2019.

IP'rty N,m"sp EXIMS I Case No.:110/24/84- Meet No/Date:6/84- Status: Deferred ALC3/2018 ALC3/2019 20.06.2019 HQ File \RLA File Lic.No/Date:0710113858 Defer Date: :0 I184/0501005341 AM 191 :07/24/0401001491 AM 191 18.09.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 17.07.2019 to furnish the following: 43 I. Break up of each export product i.e. silk fabric madeups scarp, garment in kgs and 2. Input in kgs required for each type of export product. 3. Compete for fixation of adhoc norms. Reply is not received so far. Committee decided to remind the firm and furnish in addition to the following also: 4. Clarify the weight of fabric madeups, scarp, garment and type of garments separately as wastage for each type of product is different. for re-listing on 12.09.2019.

Case No.:111/24/84- Party Name:SHAHI Meet No/Date:6/84- Status:Approved ALC3/2018 EXPORTS PVT. LTD. ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:07l 0 113859 44 :0 1/84/050100535/AM 191 :07/24/0401001601 AM 191 18.09.2018 Decision: Committee considered alongwith other relevant papers and went through the details submitted to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance

Party Name:MASTURLAL Meet No/Date:6/84- Status: Deferred Case No.:112/24/84- ALC3/2018 PRIVATE LIMITED ALC3/20 19 20.06.2019 45 HQ File RLA File Lic.No/Date:071 0 113864 Defer Date: :0 I184/0501005361 AM 191 :07/24/0401000641 AM 191 18.09.2018 12.09.2019 IDecision : Committee considered alongwith other relevant papers and went through 14

the details submitted in this case and decided to ask the firm to furnish the following: 1. Manufacturing process. 2. Stagewise wastage working out the same on weight basis. ,-.l I

Case No.: 113/24/84.

Party Name:NANDAN Meet No/Date:6/84- Status: APPROVED ALC312018 DENIM LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:081 0 143500 46 :01/84/050/00537/AM 191 :08/24/040/00205/ AM 191 20.09.2018 Decision: Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case and decided to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance of other usual conditions. r-

Case No.: 10121184-

Party Name:MICROFIBER Meet No/Date:6/84- Status:APPROVED ALC3/2018 CORP.PRIVATE LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0310823933 I :01/84/050/00380/ AM 19/ :03/95/040/00584/AM 19/ 24.09.2018 Decision: Committee considered in this case and decided to ratify the Advance Authorization issued in this case as per written comments of DPIIT dated 12.06.2019, the following norms are recommended: 1. Export item: "Non -Woven Fabrics -Matrix Fabrics Products weighing not more than 25 GM/square .Mtr. Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgs/kg Master batch 0.0201 per Kgs., Additives 0.0 I0 kg/kg. Quantity: 24,000 Kgs. Import Items: SI. No. Item Description Quantity recommended 1. Polyprop)'lene Granules 1.10 Kg/Kg content in export product 2. Plastic Netting in Rolls 1.05 Kg/Kg content in export product 3. Master batch 480 k~ 4. Relevant additives 240 kg 47 Export item No. 2:- Non -Woven Fabrics -Matrix Fabrics Products weighing 25 GM. To 75 GM /square.mtr. Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgs/kg Master batch 0.020/per KGS., Additives 0.010 kglkg. Quantity: - 6,00,000 Kgs. Import Items: SI. No. Item Description Quantity recommended 1. Polypropylene Granules I.10 Kg/Kg content in export product 2. Plastic Netting in Rolls 1.05 Kg/Kg content in export product 3. Master batch 12000 kg 4. Relevant additives 6000 kg Export item No. 3:- Non -Woven Fabrics -Matrix Fabrics Products weighing 71 GM. To 150 GM /square.mtr. Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgslkg Master batch 0.020/per KGS., Additives 0.010 kg/kg. Quantity :- Import items SI. No. Item Description Quantity recommended 1. Polypropylene Granules I. 10 Kg/Kg content in export product 2. Plastic Netting in Rolls 1.05 Kg/Kg content in export product 3. Master batch 11,520 kg 4. Relevant additives 5,760 kg 15

r Case No.: 114/24/84- Party Name:BHARAT Meet No/Date:6/84- Status: Deferred ALC3/2018 EXPORTS ALC3/20 19 20.06.2019 HQ File RLA File Lic.NolDate:0610038986 Defer Date: 48 :01/84/0501005381 AM 191 :06124/0401000321 AM 191 25.09.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 17.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to remind the firm. for re-listing on 12.09.2019. r-- Cr =e No.:2/17/84- Party Name:GOKUL Meet No/Date:6/84- Status: Deferred Al~2018 POL YMERS PYT LTD ALC3/20 19 20.06.2019 49 HQ File RLA File Lic.No/Date:0510407959 Defer Date: :0 1/84/050100295/AM 191 :05123/0401002611 AM 191 03.10.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and went through the details submitted to send the application to DPIIT for their comments. for re-listing on 12.09.2019 . .-- Case No.:3/17/84- Party Name:WELCOME Meet No/Date:6/84- Status: Deferred ALC3/2018 FOOTWEARS ALC3/2019 2006.2019 HQ File RLA File Lic.No/Date:0510407976 Defer Date: :01/84/050100296/AM 191 :05/24/0401003581 AM 191 04.10.2018 12.09.2019 Decision: Committee considered alongwith other relevant papers and decided to ask 50 the firm to submit following information as per written comments of DPIIT dated 09.07.2019: 1. Weight of export product in kg terms clearly indicating separately weight of polyurethane system for foot wear (polyol Exter) & Polyurethane system for foot wear (urecome). 2. Complete calculation for the requirement of input (both import & indigenous) giving wastage separately for each item. 3. Past production of the export product vis-a-vis consumption of inputs for the last three years duly certified by Chartered Accountant. for re-listing on 12.09.2019. r--

Case No.: 123/24/84-

Party Name:UYIRAJ Meet No/Date:6/84- Status: Deferred ALC3/2018 GLOBAL PRIVATE ALC3/20 19 LIMITED 20.06.2019 HQFile RLA File Lic.NolDate:0610038997 Defer Date: :0 1/84/050100547/AM 191 :06124/0401000361 AM 191 09.10.2018 12.09.2019 51 Decision: Committee considered and noted that the firm was asked on 18.07.2019 to furnish the following: 1. Total weight of inputs as well as export product separately 2. Norms to be fulfilled on basis of quantity of weight 3. Complete for fixation of adhoc norms. so far. Committee decided to remind the firm. for re-listing on 12.09.2019.

Party Name:TODI RAYONS Meet NolDate:6/84- Status:APPROYED Case No.: 124/24/84- ALC3/2018 PYT.LTD. ALC3/20 19 20.06.2019 52 HQ File RLA File Lic.No/Date:521 0042794 :01/84/0501005481 AM 191 :52/2410401000551 AM 191 09.10.2018 IDecision: Committee considered alongwith other relevant papers and went through ~.16

J the details submitted to ratify the above said advance authorization issued in this case as under: Export item: Nylon DOP Dyed Black Crimp (Denier 10 to 100) Quantity: 17800.000 KG Import item: Nylon 6 POY Yarn Dope Dyed Black on Cheese AA Grade (Denier 10 to 100) Quantity: 18156 KG RA concerned may take necessary action subject to compliance

I Case No.:S/18/84- Party Name:BHARA T Meet NolDate:6/84- Status: Deferred ALC3/2018 EXPORTS ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:0610039006 Defer Date: :01/84/050/003181 AM 191 :06/24/040/000381 AM 191 16.10.2018 12.09.2019 53 Decision: Committee considered alongwith other relevant papers and observed that DPIIT asked the firm on 09.07.2019 to furnish the following information and under intimation to this office: I. To indicate net content of input (both indigenous & imported) and their wastage for manufacturing export product. Accordingly, to give calculation for requirement of each input. 2. Justification for higher wastage of input, if any. Committee decided to wait for their comments. for re-listing on 12.09.2019.

Case No.: 127124/84- Party Name:UVIRAJ Meet No/Date:6/84- Status: Deferred ALC3/2018 GLOBAL PRIVATE ALC3/2019 LIMITED 20.06.2019 HQ File RLA File Lic.No/Date:061 00390 I0 Defer Date: :01/84/050/00551 lAM 191 :06124/0401000391 AM 191 23.10.2018 12.09.2019 54 Decision: Committee considered on 18.07.2019 to furnish the complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to ask the firm to furnish the following: I. Applicant may mention weight of input and export product. 2. Complete for fixation of adhoc norms. for re-listing on 12.09.2019. ,---- Iparty Name: H. R. FAB Case No.: 129/24/84- Meet No/Date:6/84- Status:APPROVED ALC3/2018 ALC3/2019 20.06.2019 HQ File IRLA File Lic.No/Date:52I 0042822 55 :01/84/050/005531 AM 191 :52124/0401000621 AM 191 26.10.2018 Decision: Committee considered alongwith other relevant papers and went through the details submitted to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance 17

r-- Case No.: 11/21184- Party Name:MICROFIBER Meet No/Date:6/84- Status: Approved ALC3/2018 CORP.PRIVATE LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0310824830 :0 1/84/05010038l1AM 191 :03/95/040100731/ AM 19/ 31.10.2018 Decision: Committee considered alongwith other relevant papers and went through the details submitted to ratify the Advance Authorization issued in this case as per written comments of DPIIT dated 12.06.2019, the following norms are recommended: Export item No. 1:- Non- Woven Fabrics-Matrix Fabrics Products weighing not more than 25 GM. /square.mtr. Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgs/kg Master batch 0.020/per KGS. , Additives 0.0 I0 kglkg. Quantity:

24,000 Kgs. Import items:- S. Item description Quantity recommended No. I. Polypropylene Granules 1.10 Kg/K.s. content in eX.Q.ortQroduct 2. Plastic Nettings in Rolls 1.05 Kg/Kg content in export product 3. Master batch 480 kg 4. Relevant additives 240 kg Export item No. 2:- Non-Woven Fabrics-Matrix Fabrics Products weighing 25 GM. to 75 GM Isquare.mtr. 56 Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgs/kg Master batch 0.020/per KGS., Additives 0.0 I0 kglkg. Quantity:- 6,00,000 Kgs. Import items S. No. Item description Quantity recommended I. Polypropylene Granules I .10 Kg/Kg content in export product 2. Plastic Nettings in Rolls 1.05 Kg/Kg content in export product 3. Master batch 12000 kg 4. Relevant additives 6000 kg Export item No. 3:- Non-Woven Fabrics-Matrix Fabrics Products weighing 71 GM. to 150 GM /square.mtr. Net content is Polypropylene 0.800 Kgs per Kg. Plastic Nettings 0.170 Kgs/kg Master batch 0.020/per KGS. , Additives 0.0 I0 kg/kg. Quantity:- 576000 Kgs. Import items S. No. Item description Quantity recommended I. Polypropylene Granules 1.10 Kg/Kg content in export product 2. Plastic Nettings in Rolls 1.05 Kg/Kg content in export product 3. Master batch 11,520 kg 4. Relevant additives 5,760 kg RA concerned may take necessary action subject to compliance

Case No.: 130124/84- Party Name:HRITIK EXIM Meet No/Date:6/84- Status: Deferred ALC3/2018 ALC3/20 19 20.06.2019 57 HQFile RLA File Lic.No/Date:26I 00 12858 Defer Date: :01/84/050100554/AM 191 :26/24/0401000 II/AM 19/ 31.10.2018 12.09.2019 Decision: Committee considered and noted that the firm was asked on 18.07.2019 to furnish the following information: I. Manufacturing process for each export and stage wise wastage for human hair. 18

Justification for requirement of other inputs and the quantities 3. Ask RA Visakhapatnam to check whether the said licence is concerned to RA, Secunderabad. Reply is not received so far. Committee decided send the reminder.

Case No.: 131/24/84-

Party Name:THREADS Meet NolDate:6/84- Status: Deferred ALC3/2018 (INDIA) LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:06 I0039022 Defer Date: 58 :01184/0501005551 AM 191 :06/2410401000401 AM 191 31.10.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to furnish the complete for fixation of adhoc norms. so far. Committee decided to remind the firm. ,-

Case No.: 1/21184-

Party Name:ALPINE Meet NolDate:6/84- Status: Deferred ALC312018 APPARELS PVT.L TD. ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0510408375 Defer Date: 59 :0 1/84/050100371/AM 191 :05123/0401003481 AM 191 12.11.2018 12.09.2019 the case as per agenda and noted that the firm was asked on 18.07.2019 to so far. Committee decided to remind the firm.

Case No.: 133/24/84-

Party Name:KORRUN Meet No/Date:6/84- Status: Deferred ALC3/2018 INDIA PVT LTD ALC3/20 19 20.06.2019 60 HQ File RLA File Lic.No/Date:0710114149 Defer Date: :01/84/0501005571 AM I91 :07/24/0401001931 AM 191 19.11.2018 12.09.2019 Decision: Committee considered the case as per agenda alongwith other relevant papers and the case is pertains to DPIIT. Committee decided to send the application to them for comments. I

Case No.: 135/24/84-

Party Meet No/Date:6/84- Status: Deferred ALC312018 Name:G.R.CORPORA TIO ALC3/2019 N 20.06.2019 HQ File RLA File Lic.No/Date:0610039031 Defer Date: 61 :01/84/0501005591 AM 191 :06/24/040100044/AM 191 20.1 1.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to Reply is not received so far. Committee decided to remind the firm. r-

Case No.: 139/24/84-

Party Name:BHARAT Meet No/Date:6/84- Status: Deferred ALC3/2018 EXPORTS ALC3/2019 20.06.2019 62 HQ File RLA File Lic.No/Date:06 I0039042 Defer Date: :0 1/84/050100563/AM 191 :06/24/0401000471 AM 191 29.11.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to so far. Committee decided to remind the firm. 19

IThe case stands deferred for re-listing on 12.09.2019.

Case No.:8/20/84-

Party Name:KTEX Meet No/Date:6/84- Status: Deferred ALC3/2018 NONWOVENS PRIV ATE ALC3/2019 LIMITED 20.06.2019 HQ File RLA File Lic.No/Date:241 0042585 Defer Date: :0 1/84/050100370/AM 191 :24124/0401000381 AM 191 30.11.2018 12.09.2019 Decision: Committee considered the case as per agenda alongwith other relevant papers and observed that 63 DPIIT asked the firm on 06.06.2019 to furnish the following information and under intimation to this office: I. Complete calculation for requirement of raw materials for manufacture of export product, indicating separately the wastage of each raw material. 2. Generic name of "Chemical for antistatic property in non woven". 3. Production of export product vis-a-vis consumption of all the raw materials both imported and indigenous for the last three years duly certified by chartered accountant. Committee decided to wait for their comments. r-

Case No.: 145/24/84-

Party Name:SOLIFLEX Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGING PRIVATE ALC3/2019 LIMITED 20.06.2019 64 HQ File RLA File Lic.NolDate:0710114201 Defer Date: :0 I184/0501005691 AM 191 :07/24/0401002101 AM 191 30.11.2018 12.09.2019 Decision: Committee considered other relevant papers and the case is pertains to DPIIT. Committee decided to send the application to them for comments.

Case No.: 147/24/84-

Party Name:UNITED DRY Meet No/Date:6/84- Status: Deferred ALC3/2018 GOODS (P) LTD ALC3/2019 20.06.2019 HQFile RLA File Lic.No/Date:0710114214 Defer Date: 65 :0 I184/050100571 1AM 191 :07/24104010020 I/AM 19/ 30.11.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to furnish the CAD, Sketch and Measurement Chart and complete two sets of application for fixation of adhoc norms. Reply is not received so far. Committee decided to send the final reminder.

Case No.: 151/24/84-

Party Name:NATROY AL Meet No/Date:6/84- Status: Deferred ALC312018 INDUSTRIES PVT. LTD ALC3/20 19 20.06.2019 HQ File RLA File Lic.NolDate:341 0044731 Defer Date: :0 1/84/050100575/AM 191 :34124/0401002831 AM 191 04.12.2018 12.09.2019 66 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to fumish the following information: 1. To indicate weight of export in kgs, indicating import coated of PVC in the export product 2. Complete calculation of requirement of imported and indigenous raw material for manufacturing export product. 3. Complete two sets of application Reply has been received on 18.06.2019. Committee decided to send the reply to DPIIT for their comments. F

Case No.:4121/84-ALC3/2018

Party Name:GUPTA HAIR Meet No/Date:6/84- Status: PRODUCTS (P) LTD. ALC3/20 19 Reject 20.06.2019 ~ 20

HQ File :01l84/050100374/AM 191 I RLAFile :04/24/0401001701 AM 191 ILic.No/Date:0410164951 106.12.2018 Decision: Committee considered the case as per agenda and relevant papers and observed that firm's reply has been received on 20.07.2019. After detailed deliberation, Committee decided to reject the case as the firm has not given the stage-wise requirement of cleaning liquid.

Case No.: 152/24/84-

Party Name:RIMA EXPORTS Meet No/Date:6/84- Status: Deferred ALC3/2018 ALC3/2019 20.06.2019 HQ File RLA File Lic.NolDate:0610039051 Defer Date: 68 :01/84/050100576/AM 191 :06/24/0401000511 AM 191 06.12.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 18.07.2019 to so far. Committee decided to remind the firm. r-

Case No.:3/21184-

Party Name:J C S IMPEX Meet No/Date:6/84- Status: ALC3/2018 PRIV ATE LIMITED ALC3/2019 APPROVED 20.06.2019 HQ File RLA File Lic.No/Date:0210208840 :01/84/0501003731 AM 191 :02/24/0401001281 AM 191 11.12.2018 69 Decision: Committee considered the case as per agenda alongwith other relevant papers and observed that the applicant is exporting the product of very large variation in GSM and also importing Silk fabric of large variation in GSM, so whatever quantity of input fabric is imported, the same may be allowed with 2% wastage on the weight of the export product. The applicant has not given weight of the input fabric and the export product. NC decided to allow 2% wastage on input fabric on the weight of respective export product.

Case No.: 153/24/84-

Party Name:MAGNUM Meet No/Date:6/84- Status: Deferred ALC3/2018 FOOTWEAR PRIV ATE ALC3/20 19 LIMITED 20.06.2019 HQFile RLA File Lic.NolDate:0610039060 Defer Date: 70 :01/84/050100577/AM 191 :06/24/0401000521 AM 191 13.12.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to Reply is not received so far. Committee decided to remind the firm. r-

Case No.: 154/24/84-

Party Name:VRIJESH Meet NolDate:6/84- Status: Deferred ALC3/2018 NA TURAL FIBRE & ALC3/20 19 FABRICS (INDIA) PVT. 20.06.2019 LTD. 71 HQFile RLA File Lic.No/Date:0310825671 Defer Date: :01/84/0501005781 AM 191 :0319510401009491AM 191 14.12.2018 12.09.2019 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to for fixation of adhoc norms. so far. Committee decided to send the final reminder. The case stands deferred for re-listing on 20.06.2019. F

Case No.: 155124/84-

Party Name:VRIJESH Meet NolDate:6/84- Status: Deferred ALC3/2018 NATURAL FIBRE & ALC3/2019 FABRlCS ([NOlA) PVT. 20.06.2019 21

~I ILTD. I I ,-------------------,--------------------,----------------,-----------1 \RLA File !Lic.No/Date:0310825672 \Defer Date: 1:03/95/040100950/AM191 14.12.2018 112.09.2019 HQFile :0I184/0501005791 AM 191 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to so far. Committee decided to send the final reminder.

Case No.:6/23/84-

Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/20 19 20.06.2019 73 HQ File RLA File Lic.No/Date:341 0044764 Defer Date: :01/84/050100422/AM 191 :34/24/0401002821 AM 191 17.12.2018 12.09.2019 Decision: Committee considered the details submitted in this case and decided to send the application to DPIIT for their comments. The case stands deferred for re-listing on 12.09.2019 . .-Case No.:7/23/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/2019 20.06.2019 74 HQ File RLA File Lic.No/Date:341 0044763 Defer Date: :01/84/0501004231 AM 191 :34/2410401002781 AM 191 17.12.2018 12.09.2019 Decision: Committee considered the details submitted in this case and decided to send the application to DPIIT for their comments.

Case No.:2/23/84-

Party Name:SHANKAR Meet NolDate:6/84- Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/2019 20.06.2019 75 HQ File RLA File Lic.No/Date:341 0044769 Defer Date: :01/84/050100418/AM 191 :34/24/0401002811 AM 191 18.12.2018 12.09.2019 Decision: Committee considered the details submitted in this case and decided to send the application to DPIIT for their comments. The case stands deferred forre-listing on 12.09.2019 . .-Case No.:5/23/84- Party Name:SHANKAR Meet No/Date:6/84- Status: Deferred ALC3/2018 PACKAGlNGS LIMITED ALC3/2019 20.06.2019 76 HQ File RLA File Lic.No/Date:341 0044767 Defer Date: :01/84/0501004211 AM 191 :34124/0401002801 AM 191 18.12.2018 12.09.2019 Decision: Committee considered the details submitted in this case and decided to send the application to DPIIT for their comments.

Meet NolDate:6/84- Status: APPROVED

Case No.: 156/24/84-

Party Name:HIGH ALC3/2018 PERFORMANCE ALC3/20 19 TEXTILES PRIVATE 20.06.2019 LIMITED 77 HQ File RLA File Lic.No/Date:0510408977 :01184/0501005801 AM 191 :05/2310401004061 AM 19/ 18.12.2018 Decision: Committee considered other relevant papers and noted that firm's representatives had appeared before NC on 13.08.2019 and explained their case. After detailed tv·22

deliberation, Committee decided to ratify the norms for the above advance authorization as applied for. ,- Party Name:TEXPORT Meet No/Oate:6/84-

Case No.: 157/24/84-

Status:Approved ALC3/2018 OVERSEAS PVT.L TO, ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Oate:0710114300 78 :0 1I84/050/00581/AM 191 :07/24/040/002321 AM 191 19.12.2018 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for. ,-

Case No.: 18121/84-

Party Name:MODELAMA Meet No/Date:6/84- Status:Approved ALC3/2018 EXPORTS PVT LTD. ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:051 0409017 79 :0 1/84/050100388/AM 191 :05124/0401005281 AM 191 20.12.2018 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Case No.: 158/24/84-

Party Name:ULTRA DENIM Meet No/Date:6/84- Status: Deferred ALC3/2018 PVT. LTD. ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:081 0 144115 Defer Date: :0 I184/0501005821 AM 191 :08/24/0401003071 AM 191 20.12.2018 12.09.2019 80 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to furnish the following: 1. Evidence of use of 16.7 % indigo blue on the weight of export product allowed in earlier licences may be submitted 2. Complete two sets of application Reply is not received so far. NC decided to send the final reminder. ,- Status: Deferred

Case No.: 159124/84-

Party Name:UL TRA DENIM Meet No/Oate:6/84- ALC312018 PVT. LTD. ALC3/20 19 20.06.2019 HQFile RLA File Lic.No/Date:081 0 144116 Defer Date: :01/84/050100583/AM I91 :08/24/040/003081 AM 191 20.12.2018 12.09.2019 81 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to furnish the following: 1. Evidence of use of 16.7 % indigo blue on the weight of export product allowed in earlier licences may be submitted 2. Complete two sets of application Reply is not received so far. NC decided to send the final rem inder. rCase No.:160/24/S4- Party Name:GOKALDAS Meet No/Oate:6/84- Status:Approved ALC3/2018 EXPORTS LTD ALC3/2019 2 20.06.2019 IHQFile IRLA File ILic.NolDate:071 0 114306

1:07/24/040100230/AM 191 120.12.2018 1 1:01/84/050100584/AM 191 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for. r-

Case No.: t 62124/84-

Party Name:KOTTEX Meet No/Date:6/84- Status: Approved ALC3/2018 INDUSTRIES PVT LTO ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:52I 0042887 83 :0I184/0501005861 AM 191 :52/2410401000731 AM 191 27.12.2018 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Case No.: 168/24/84-

Party Name:NANDAN Meet No/Date:6/84- Status: Deferred ALC3/2018 DENIM LIMITED ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:081 0 144194 Defer Date: :0 I184/0501005921 AM 191 :08/2410401002691 AM 191 01.01.2019 12.09.2019 84 Decision: Committee considered the case as per agenda and noted that the firm was asked on 22.07.2019 to furnish the following: I. Content of cotton yam with polyester and polyester textures filament yam in export product may be given, 2. Justification for higher quantity of vat indigo to given 3. Complete two sets of application Reply is not received so far. NC decided to send the final reminder. r- Istatus:APproved

Case No.: 169/24/84-

Party Name:NANDAN Meet No/Date:6/84- ALC3/2018 DENIM LIMITED ALC3/20 19 I 20.06.2019 HQ File RLA File Lic.NolDate:0810144195 I 85 :0 1/84/050100593/AM 191 :08124/0401002701 AM 191 01.01.2019 Decision: Committee considered the case as per agenda alongwith other relevant papers and observed that the firm has furnished their reply on 31.07.2019. After detailed deliberation, NC decided to ratify the norms for the above advance authorization as applied for. r-

Case No.:2/21/84-

Party Name:A YM SYNTEX Meet No/Date:6/84- Status:Approved ALC3/2018 LTD. ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:0310826087 86 :01/84/050100372/AMI91 :03/94/0401008451 AM 191 02.01.2019 Decision: Committee considered in this case. After detailed deliberation, NC decided to ratify the norms allowed for spandex yam to the extent 22660 Kgs for the export weight of 2,00,000 Kgs of export product Polyester Texturised Spandex Air Covered Yam against the above said Advance Authorisation. RA concerned may take necessary action subject to compliance of other usual conditions r;;- Case No.:3/6/84-ALC3/2019 Party Name:AA YDEE 1° I EXPORTS PVT. LTD. Meet No/Date:6/84- ALC3/2019 Status:Approved P-- 24

I I 120.06.2019 I ,--------------------r--------------------- ,------------1 IRLA File ILic.No/Date:0310829227
1:03/94/040100 109/AM201 123.05.2019 HQFile :0I184/0501000821 AM201 Decision: Committee considered in this case and decided to ratify the norms allowed 5661 Kg on input of the export product against the above said advance authorization.

Case No.: 1/6/84- ALC3120 19

Party Name:AMRIT EXPORTS Meet No/Date:6/84- Status: PVT. LTD. ALC3/2019 Approved 20.06.2019 HQ File RLA File Lic.No/Date:0210209189 88 :0 I184/050/000801 AM201 :02/24/0401000191 AM201 24.05.2019 Decision: Committee considered in this case and decided to ratify the norms allowed for input SI. No. I & 2 Fabric as applied and input SI. No. 3,4 & 5 net to net + I% on input of the export product against the above said Advance Authorisation. ,--

Case No.:2/6/84-ALC3/2019

Party Name:SRI CHERAN Meet No/Date:6/84- Status: SYNTHETICS INDIA ALC3/2019 Deferred PRIV ATE LIMITED 20.06.2019 HQFile RLA File Lic.NolDate:32I 0078968 Defer Date: :0 1/84/050/000811 AM201 :32/24/040/000121 AM201 24.05.2019 12.09.2019 89 Decision: Committee considered the details submitted in this case and decided to ask the firm furnish the following: I. Manufacturing process 2. Stage wise wastage may be explain as to when 3. Net content of Cotton yam in the 4 products is 28000 Kg, 56000 Kg, 70,000 kg and 112000 kg and the weight of the export product which are blended with manmade fibre is also same where the weight of man made fibre will go. ,--

Case No.:7/6/84-ALC3/2019

Party Name:COTTON Meet No/Date:6/84- Status:Approved WORLD ALC3/20 19 20.06.2019 HQ File RLA File Lic.No/Date:0710114954 90 :0 1/84/0501000861 AM201 :07/24/0401000441 AM201 24.05.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Status:

Case No.:8/6/84-ALC3/20I9

Party Name:BHARAT SILKS Meet No/Date:6/84- ALC3/2019 Deferred 20.06.2019 HQFile RLA File Lic.No/Date:07 101 1496 I Defer Date: 91 :0 I184/0501000871 AM201 :07/24/0401000291 AM201 27.05.2019 12.09.2019 the case as per agenda and decided to ask firm to furnish the complete two sets of application. 25

r--

Case No.:4/6/84-ALC3/2019

Party Name:TANGERINE Meet NolDate:6/84- Status: DESIGN PVT. LTD. ALC3/2019 Deferred 20.06.2019 92 HQFile RLA File Lic.NolDate:051 041 0758 Defer Date: :01/84/050/00083/ AM201 :05124/040/001191 AM201 28.05.2019 12.09.2019 the case as per agenda and decided to ask firm to furnish the complete two sets of application.

Case No.: 5/6/84- ALC3/20 19

Party Name:ADMIRE FIBER Meet No/Date:6/84- Status: TEX (INDIA) PVT. LTD. ALC3/20 19 Deferred 20.06.2019 93 HQ File RLA File Lic.No/Date:081 0 145381 Defer Date: :0 I184/0501000841AM201 :08/24/0401000751 AM201 28.05.2019 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to send application to DPIIT for their comments. r--

Case NO.:9/6/84-ALC3/2019

Party Name:LUNA Meet No/Date:6/84- Status: APPARELS PRIVATE ALC3/20 19 Deferred LIMITED 20.06.2019 94 HQ File RLA File Lic.No/Date:021 020920 I Defer Date: :01/84/0501000881 AM201 :02124/0401000231 AM201 28.05.2019 12.09.2019 Decision: Committee considered the details submitted in this case and decided to ask the firm to furnish the CAD and sample of the product.

Case No.:6/6/84-ALC3/2019

Party Name:ARJAN IMPEX Meet NolDate:6/84- Status: PRIV ATE LIMITED ALC3/2019 Deferred 20.06.2019 95 HQFile RLA File Lic.No/Date:051 041 0767 Defer Date: :0 I184/050/000851 AM201 :05123/0401000931 AM201 29.05.2019 12.09.2019 Decision: Committee considered the case as per agenda and observed that range of width and GSM is too wide and decided to applicant may give weight of input and export product.

Case No.: 1O/6/84-ALC3/2019

Party Name:KESH Meet No/Date:6/84- Status: KNITWEAR PVT LTD ALC312019 Deferred 20.06.2019 HQ File RLA File Lic.No/Date:31 10067436 Defer Date: 96 :01184/0501000891 AM201 :31/83/040/00031 IAM20/ 31.05.2019 12.09.2019 Decision: Committee considered in this case observed that applicant may clarify (I) the nature of input whether yarn or otherwise (2) manufacturing process with stage-wise wastage and total wastage claimed for each export product and decided to ask the firm to furnish the above requirement of the Committee. r--

Case No.: 11I6/84-ALC3/2019

Party Name:JUMBO BAG Meet No/Date:6/84- Status: LIMITED ALC3/2019 Deferred 97 20.06.2019 HQ File RLA File Lic.No/Date:0410165667 Defer Date: :01/84/050/000901 AM20/ :04124/040/000301 AM20/ 31.05.2019 12.09.2019 ~26

., I Decision: Committee considered the case as per agenda alongwith other relevant papers. The case is pertains to OPIIT. Committee decided to send application to OPIIT for their comments. ~

Case No.: 1216/84-

Party Name:SPUNWEB Meet No/Date:6/84- Status: Approved ALC3/2019 NONWOVEN PVT.L TO ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Oate:24I 0042770 98 :0 I184/050100091 1AM201 :2412410401000021AM201 31.05.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Case No.: 13/6/84-ALC3/2019

Party Name:TANGERINE Meet No/Date:6/84- Status: Deferred DESIGN PVT. LTO. ALC3/20 19 20.06.2019 99 HQ File RLA File Lic.No/Date:051 041 0789 Defer Date: :0 I184/0501000921AM201 :05/24/0401001251 AM201 03.06.2019 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. ,--

Case No.: 14/6/84-ALC3/2019

Party Name:K H EXPORTS Meet No/Date:6/84- Status: INDIA PRIVATE LIMITED, ALC3/20 19 Deferred 20.06.2019 100 HQ File RLA File Lic.No/Date:041 0 165676 Defer Date: :0I184/0501000931AM201 :0412410401000381AM201 03.06.2019 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to ask the firm to furnish the complete two sets of application

Case No.: IS/6/84-ALC3/2019

Party Name:EMMBI Meet No/Date:6/84- Status: INDUSTRIES LIMITED. ALC3/20J9 Deferred 20.06.2019 101 HQ File RLA File Lic.NolDate:0310829395 Defer Date: :0I184/0501000941AM201 :03/94/0401001721 AM201 03.06.2019 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to ask the firm to furnish the complete two sets of application ,-- Party Name:TANGERINE Meet No/Date:6/84- Status:

Case No.: 16/6/84- ALC3/20 19

DESIGN PVT. LTD. ALC3/2019 Deferred 20.06.2019 HQ File RLA File Lic.No/Date:051 041 0812 Defer Date: 102 :0I184/0501000951AM201 :05/24/0401001241 AM201 04.06.2019 12.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to ask the firm to furnish the complete two sets of application [Status: I [103 [Case No.: 17/6/84-ALC3/2019 [Party Name:TANGERINE [Meet NolDate:6/84-

~ \DESIGN PVT. LTD. \ALC3/2019 \Deferred 20.06.2019 HQ File \RLA File \Lic.NolDate:051 041 0813 \Defer Date: :01/84/050100096/AM201 1:05/24/040100123/AM201 104.06.2019112.09.2019 Decision: Committee considered the case as per agenda. The case is pertains to DPIIT. Committee decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. ~ I

Case No.: 18/6/84-ALC3/2019

Party Name:HANUMAN Meet NolDate:6/84- Status: KNIT FASHION, ALC3/20 19 Deferred 20.06.2019 104 HQFile RLA File Lic.No/Date:32I 0078982 Defer Date: :0 I184/0501000971 AM2 01 :32/24/0401000161 AM201 04.06.2019 12.09.2019 the case as per agenda and decided to ask the firm to furnish the complete

Iparty Name.H, R. FAB

Case No.: 19/6/84-

Meet NolDate:6/84- Status:Approved ALC3/2019 ALC3/2019 20.06.2019 HQFile IRLA File Lic.No/Date:52I 0043071 105 :0 1/84/0501000981 AM201 :52/24/0401000 I01AM201 04.06.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for. ~

Case No.:20/6/84-

Party Name:GOV ARDHAN Meet NolDate:6/84- Status:Approved ALC3/2019 OVERSEAS PVT. LTD. ALC3/2019 20.06.2019 HQ File RLA File Lic.No/Date:071 0 I 15009 106 :01/84/0501000991 AM201 :07/24/0401000551 AM201 04.06.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Case No.:2116/84-ALC312019

Party Name:INDUSTRIAL Meet No/Date:6/84- Status: FILTERS & FABRICS P. ALC3/2019 Deferred LIMITED., 20.06.2019 HQFile RLA File Lic.No/Date:56 I0005630 Defer Date: 107 :01/84/050100100/AM201 :56/24/040100032/AM 191 04.06.2019 12.09.2019 Decision: Committee considered the details submitted in this case and decided to ask the firm to furnish the following: I. Manufacturing process 2. Stagewise wastage and total wastage claimed for each input for each export product. FC." No.:22/6/84-ALC312019 Party Name:rNDUSTRIAL Meet No/Date:6/84- Status: FILTERS & FABRICS P. ALC3/2019 Deferred 8 LIMITED., 20.06.2019 IHQ File IRLA File ILic.No/Date:561000563 I \Defer Date: ~28

:01/84/050100101 IAM201 1:56/24/040100036/AM 191 \12.09.2019 104.06.2019 Decision: Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case and decided to ask the firm to furnish the following: I. Manufacturing process 2. Stagewise wastage and total wastage claimed for each input for each export product. r-

Case No.:23/6/84-ALC3/20t

9 Party Name:VERTERRA Meet No/Date:6/84- Status: VENTURES ALC312019 Deferred 20.06.2019 109 HQ File RLA File Lic.No/Date:3110067443 Defer Date: :01/84/0501001021 AM201 :31183/040100030/AM201 07.06.2019 12.09.2019 the case as per agenda and decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. The case stands deferred for re-Iisting on 12.09.2019.

Case No.:24/6/84-ALC3/20t

9 Party Name:RADNIK Meet No/Date:6/84- Status: EXPORTS ALC3/2019 Deferred 20.06.2019 110 HQ File RLA File Lic.No/Date:051 041 0868 Defer Date: :01/84/050100 1031AM201 :05/24/0401001431 AM201 11.06.2019 12.09.2019 the case as per agenda and decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. r-

Case No. :25/6/84-ALC3/20

t9 Party Name:CENTURY Meet No/Date:6/84- Status: OVERSEAS ALC3/20 19 Deferred 20.06.2019 111 HQ File RLA File Lic.No/Date:051 041 0870 Defer Date: :01/84/050100 I04/AM201 :05/231040100 I001AM201 11.06.2019 12.09.2019 Decision: Committee considered the case as per agenda and decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. The case stands deferred for re-Iisting on 12.09.2019.

Meet No/Date:6/84- Status:

Case No.:26/6/84-ALC3/2019

Party Name:CHANDRA MUKHI IMPEX LIMITED ALC3/20 19 Deferred 20.06.2019 112 HQFile RLA File Lic.No/Date:0210209239 Defer Date: :0 I184/050100 I051AM201 :0212410401000291AM201 11.06.2019 12.09.2019 the case as per agenda and decided to ask the firm to furnish the complete r- Party Name: PRET Meet No/Date:6/84- Status: I

Case No.:28/6/84-ALC3/20t

9 INTERPRET CLOTHING ALC3/2019 Deferred PRIVATE LIMITED 20.06.2019 113 HQFile RLA File Lic.NolDate:071 0 115039 Defer Date: :0 I184/050100 I071AM201 :07/24/0401000521 AM201 11.06.2019 12.09.2019 Decision: Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case and decided to ask the firm to furnish the CAD and Image of the product. ~29

Case No.:29/6/84-

Party Name:COTTON Meet No/Date:6/84- Status:Approved ALC3/2019 WORLD ALC3/2019 20.06.2019 HQFile RLA File Lic.NolDate:071 0 115042 114 :0 1/84/050100 I081AM201 :071241040100057 IAM201 11.06.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for.

Case No.:27/6/84-ALC3/2019

Party Name:MAHARANI OF Meet No/Date:6/84- Status: INDIA ALC3/2019 Deferred 20.06.2019 lIS HQFile RLA File Lic.NolDate:OSI 041 0911 Defer Date: :01184/0S0100 I061AM201 :OS/24/040100 14S1AM201 12.06.2019 12.09.2019 the case as per agenda and decided to ask the firm to furnish the complete two sets of application for fixation of adhoc norms. ,--

Case No.:30/6/84-ALC3/2019

Party Name:SIYSHREE Meet NolDate:6/84- Status: MEDITTEX (INDIA) ALC3/20 19 Deferred PRIY ATE LIMITED, 20.06.2019 116 HQFile RLA File Lic.No/Date:32I 0078991 Defer Date: :01/84/050100 109/AM201 :32/24/0401000151 AM201 12.06.2019 12.09.2019 Decision: Committee considered the details submitted in this case and decided to ask the firm to furnish the CAD and sample of the product.

Party Name:KOTTEX Meet No/Date:6/84-

Case No.:31/6/84-

Status:Approved ALC3/2019 rNDUSTRIES PYT LTO ALC3/2019 20.06.2019 HQFile RLA File Lic.No/Date:S210043074 117 :01/84/050100110/AM201 :52/211040100039/AM201 13.06.2019 Decision: Committee considered in this case and decided to ratify the norms for the above advance authorization as applied for. Minutes of manual cases considered by the Norms Committee -V In Meeting No.06/84 AM-20 dated 20.06.2019 118.

Case No. 102

Mis. Shahi Exports Pvt. Ltd. (SPL) NC Meeting No. 06/AM20 dated F. No. 01/841l71/00109/AM20/DES.Y 20.06.2019 actually held on 09.07.2019 Prior fixation of adhoc norms for the following export product under special advance license scheme under

para 4.04(a) I FTP 2015-20:

Ladies Trouser made of 98% Cotton 2% Elastane (Spandex) Dyed Woven Fabric GSM 285 (Tolerance +1- 10%) Style No. 102323 30

Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 20.06.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation. Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. As per CAD and other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned RA for further necessary action and compliance of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation the norms again. GSM should match in import and export. 119.

Case No. 103

dated F. No. 01/841171/00110/AM20/DES.V licence scheme under 1. Boys Trouser made of 100% Polyester PU Coated Dyed Woven Fabric GSM 150 and 100% Polyester PU Coated Dyed Woven Fabric GSM 224 (Tolerance +1- 10%) Style No. 306987 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 19.06.2019 has requested for fixation of norms Committee considered the case as per the application is forwarded to the concerned of other usual 120.

Case No. 104

dated F. No. 01/841171100111/AM20IDES.V

para 4.04(a) 1 FTP 2015-20:

I. Ladies Trouser made of98% Cotton 2% Elastane (Spandex) Dyed Woven Fabric GSM 285 (Tolerance +1- 10%) Style No. 102080 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 20.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 121.

Case No. 105

dated F. No. 01/841l71/00112/AM20/DES.V I. Ladies Cargo Shorts made of98% Cotton 2% Elastane (Spandex) Dyed Woven Fabric GSM 285 (Tolerance +1- 10%) Style No. 104360 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 21.06.2019 has requested Committee considered the case as per other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned of other usual 31

~

Case No. 106

MIs. Shahi Exports Pvt. Ltd. (SPL) dated F. No. 01/841171/00113/AM20/DES.V I. Mens Shirt (Half Sleeve) made of 57% Polyester 43% Nylon Yam Dyed Woven Fabric GSM 84 (Tolerance +1- 10%) Style No. XM0883 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 18.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 123.

Case No. 107

dated F. No. 01/84/171/00114/AM20/DES.V I. Boys Jacket with Hood made of 100% Polyester PU Coated Printed Woven Fabric GSM 150 (Tolerance +1- 10%) Style No. 122344 Decision: MIs. Shahi Exports Pvt. Ltd. vide their letter dated 18.06.2019 has requested Committee considered the case as per other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned of other usual 124.

Case No. 108

NC Meeting No. 061AM20 dated F. No. 01l84/171/00115/AM20/DES.V I. Girls Jacket with Hood made of 100% Polyester PU Coated Printed Woven Fabric GSM 150 (Tolerance +1- 10%) Style No. 122345 Decision: MIs. Shahi Exports Pvt. Ltd. vide their letter dated 18.06.2019 has requested Committee considered the case as per other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation the nonns again. 125.

Case No. 109

dated F. No. 01/84/171/00116/AM20/DES.V Prior fixation of adhoc nonns for the following export product under special advance 1. Ladies Trouser made of 100% Polyester PU Coated Dyed Woven Fabric GSM 150 and 100% Polyester PU Coated Dyed Woven Fabric GSM 224 (Tolerance +1- 10%) Style No. 122572 32

Decision: MIs. Shahi Exports Pvt. Ltd. vide their letter dated 18.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 126.

Case No. 110

dated F. No. 01/841l71/00117/AM20/DES.V Prior fixation of adhoc nOnTISfor the following export product under special advance 1. Mens Cargo Shorts made of 59% Cotton 39% Polyester 2% Elastane (Spandex) Dyed Woven Fabric GSM 260 and 95% Nylon 5% Elastane (Spandex) Dyed Woven Fabric GSM 230 (Tolerance +/- 10%) Style No. 104201 Decision: M/s. Shahi Exports Pvt. Ltd. vide their letter dated 15.06.2019 has requested Committee considered the case as per other details provided in this case, the Committee approved the input output nOnTISas applied for. The copy of the application is forwarded to the concerned of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation the nOnTISagain. 127.

Case No. III

NC Meeting No. 06/AM20 dated F. No. 01/841171/00118/AM20IDES.V Prior fixation of adhoc nOnTISfor the following export product under special advance 1. Mens Cargo Trouser made of 59% Cotton 39% Polyester 2% Elastane (Spandex) Dyed Woven Fabric GSM 260 and 95% Nylon 5% Elastane (Spandex) Dyed Woven Fabric GSM 230 (Tolerance +1- 10%) Style No. 103337 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 15.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual conditions. There is no need to send the case to DG FT (HQ) for fixation the norms again. 128.

Case No. 112

dated F. No. 01/841171/00119/AM20/DES.V Prior fixation of adhoc nOnTISfor the following export product under special advance I. Mens Cargo Shorts made of 59% Cotton 39% Polyester 2% Elastane (Spandex) Dyed Woven Fabric GSM 260 and 95% Nylon 5% Elastane (Spandex) Dyed Woven Fabric GSM 230 (Tolerance +/- 10%) Style No. 104352 33

Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 15.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 129.

Case No. 113

dated F. No. 01l841171100120/AM201DES.V Prior fixation of adhoc norms for the following export product under special advance 1. Mens Cargo Shorts made of 59% Cotton 39% Polyester 2% Elastane (Spandex) Dyed Woven Fabric GSM 260 and 95% Nylon 5% Elastane (Spandex) Dyed Woven Fabric GSM 230 (Tolerance +1- 10%) Style No. 104197 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 15.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual I 130.

Case No. 114

dated F. No. 01/84/17 110012I/AM20/DES.V 1. Mens Cargo Trouser made of 59% Cotton 39% Polyester 2% Elastane (Spandex) Dyed Woven Fabric GSM 260 and 95% Nylon 5% Elastane (Spandex) Dyed Woven Fabric GSM 230 (Tolerance +1- 10%) Style No. 103159 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 15.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 131.

Case No. 115

F. No. 01/84/17 1100I27/AM20/DES.V I. Mens Trouser made of 100% Polyester PU Coated Printed Woven Fabric GSM 285 (Tolerance +1- 10%) Style No. 110575 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 2 1.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 34

Case No. 116

Mis. Richa Global Exports Pvt. Ltd. (SPL) F. No. 01/84117 1/00 I22/AM20/DES.V

para 4.04(a) 1 FTP 2015-20:

Ladies Romper of 100% Polyester Printed Woven Fabric GSM 208 (+1- 10%) Along with Indian Lining Style No. 517633-519783 Decision: Mis. Richa Global Exports Pvt. Ltd. vide their letter dated 18.06.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation. Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. As per CAD and other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned RA for further necessary action and compliance of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation the norms again. 133.

Case No. 117

F. No. 01/841171100123/AM20/DES.V Mis. Wear Well India Pvt. Ltd. (SPL) 1. BABIES DRESS MADE OF 83% POLYESTER 17% METALLIC WOVEN FABRIC, GSM: 110 +1- 10% (IMPORTED) WITH 100% POLYESTER MESH KNITTED LINING & 100% POLYESTER WOVEN LINING (INDIGENOUS) STYLE NO: YG-019 2. GIRLS DRESS MADE OF 83% POLYESTER 17% METALLIC WOVEN FABRIC, GSM: 110 +1- 10% (IMPORTED) WITHIOO% POLYESTER MESH KNITTED LINING & 100% POLYESTER WOVEN LINING (INDIGENOUS) STYLE NO: YG-OI9 3. GIRLS DRESS MADE OF 97%POLYESTER 3% ELASTANE KNITTED SEQUINS FABRIC, GSM: 220 +1- 10%, WITH 100% POLYESTER WOVEN LINING (INDIGENOUS) STYLE NO: OG-S2 4. GIRLS JUMPSUIT MADE OF 100% POLYESTER KNITTED SEQUINS FABRIC, GSM: 385 +1- 10%, WITH 100% POLYESTER KNITTED FABRIC LINING (INDIGENOUS) STYLE NO: OG-S7 5. GIRLS PLAYSUIT-UPPER PART MADE OF 97% POLYESTER 3% ELASTANE KNITTED FABRIC GSM: 260 +1- 10% AND LOWER PART MADE OF 96% POLYESTER 4% ELASTANE KNITTED FABRIC, GSM: 330 +1- 10% WITH 100% POLYESTER KNITTED FABRIC LINING (INDIGENOUS) (STYLE NO; OG-66) 6. Girls Dress made of 84% polyamide II % Metallized 5% Elasthane knitted Fabric, GSM 140 +1- 10%, (imported) with 100% Polyester woven Lining (indigenous), Style No; Party Dress Sparkle Skater 7. GIRLS DRESS UPPER PART MADE OF 87% POLYESTER 10% METALLIC 3% ELASTANE KNITTED FABRIC, GSM: 280 +1- 10%, LOWER PART MADE OF 82% POLYESTER 18% METALIC WOVEN FABRIC, GSM: 127 +1- 10%, (STYLE NO: OGSMGS002) Decision: Mis. Wear Well India Pvt. Ltd. vide their letter dated 21.06.2019 has requested for fixation of norms Committee considered the case as per the application is forwarded to the concerned of other usual 134.

Case No. 118

Mis. Wear Well India Pvt. Ltd. (SPL) dated F. No. 01/841171/00124/AM20/DES.V »-- 35

para 4.04(a) 1 FTP 2015-20:

I. G[RLS TOP MADE OF 94% POLYESTER 6% ELASTANE KNITTED VELOUR FABR[C, GSM: 260 +1- 10% (STYLE NO: OGSPF1200) 2. GIRLS TROUSER MADE OF 94% POLYESTER 6% ELASTANE KNITTED VELOUR FABRIC (NAVY & PINK), GSM: 260 +1- [0% (STYLE NO: OGSPFI199) 3. BABIES JACKET SHELL MADE OF 67<yQ COTTON 31% POLYESTER 2% ELASTANE WOVEN VELVET FABRIC, GSM: 280 +1- 10% WITH LIN[NG MADE OF 100% POLYESTER WOVEN FABRIC, GSM: 230 +1- 10% (STYLE NO: BYGPFl103) 4. GIRLS DRESS MADE OF 93% POLYESTER 7% ELASTANE CRUSHED VELOUR KNITTED FABRIC, GSM: 290 +1- 10% (STYLE NO: RED VELOUR DRESS) .i Decision: Mis. Wear Well India Pvt. Ltd. vide their letter dated 2 [.06.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation. Committee considered the case as per the application is forwarded to the concerned of other usual 135. I

Case No. 119

Mis. Bharat Silks (SPL) dated F. No. 01l841171/00125/AM20/DES.V I. Girls Frock With Bloomer made of 100% Silk Woven Fabric GSM 83 +1- [0% (Net Content: 146.27 Kgs) with Lining Style No. 100033377 2. Girls Frock With Bloomer made of 100% Silk Woven Fabric GSM 83 +1- 10% (Net Content: 437.81 Kgs) with Lining Style No. 100033378 Decision: MIs. Bharat Silks vide their letter dated 19.06.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation. Committee considered alongwith other relevant papers and noted that firm was requested to furnish the following information: I. The CAD looks proper placement of components 2. As a result efficiency is very low 3. Improper placement of components clearly shows higher wastage of fabric which may be reduced with proper placement. 4. Applicant to judiciously work out revised use of imported fabric which is high cost Item. The case stands deferred for re-listing on 30.07.2019. 136.

Case No. 120

Mis. Afflatus International (SPL) F. No. 01/841171/001261 AM20/DES.V I. Ladies Jumpsuit made of 100% Cotton Corduroy Dyed Woven Fabric GSM 160 (+1- 10%) Style No. 136148215/136148709 Decision: MIs. Afflatus International vide their letter dated 24.06.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation. Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. As per CAD and other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned RA for further necessary action and compliance of other usual 36

Case No. 121

dated F. No. 01/841171!00128/AM201DES.V I. Girls Jacket with Hood made of 100% Polyester PU Coated Printed Woven Fabric GSM 150 (Tolerance +1- 10%) Style No. 122345 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 27.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 138.

Case No. 122

MIs. Shahi Exports Pvt. Ltd. (SPL) dated F. No. 01/841171100129/AM20/DES.V Prior fixation of adhoc norms for the following export product under special advance

para 4.04(a) 1 FTP 2015-20:

I. Girls Dress made of 64% Polyester 34% Viscose 1% Elastane 1% Metallised Fiber Woven Yarn Dyed Fabric GSM 225 (Tolerance +1- 10%) Style No. 003-98569-2 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 26.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual ~ 139.

Case No. 123

MIs. Shahi Exports Pvt. Ltd. (SPL) dated F. No. 01/84/171/00130/AM20/DES.V Prior fixation of adhoc norms for the following export product under special advance I. Ladies Jacket with Hood made of 100% Polyester PU Coated Printed Woven Fabric GSM 80 and 100% Polyamide PU Coated Dyed Woven Fabric GSM 197 (Tolerance +1- 10%) Style No. 123693 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 27.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 37

Case No. 124

dated F. No. 01/84/171/00131/AM20/DES.V I. Boys Jacket with Hood made of 100% Polyester PU Coated Printed Woven Fabric GSM 150 (Tolerance +1- 10%) Style No. 122344 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 28.06.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 141.

Case No. 125

NC Meeting No. 061 AM20 dated F. No. 01/84/17 1100132/AM20IDES.V I. Ladies Jacket with Hood made of 100% Polyester Dyed Woven Fabric GSM 91 (Tolerance +1- 10%) Style No. WLOl64 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 28.06.2019 has requested Committee considered the case as per other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned of other usual 142.

Case No. 126

dated F. No. 01/84117 1/00133/AM20IDES.V I. Ladies Bib and Brace made of 69% Cotton 31% Polyester Dyed Woven Fabric GSM 230 (Tolerance +1- 10%) Style No. 104284 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 01.07.2019 has requested for above said export product under Special Advance Authorisation. Committee considered the case as per the application is forwarded to the concerned RA for further necessary action and compliance of other usual 38

Case No. 127

F. No. 01/84/1 71/00 I34/AM20/DES.V 1. Mens Shorts made of98% Cotton 2% Elastane (Spandex) Dyed Woven Fabric GSM 285 (Tolerance +1- 10%) Style No. 103652 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 01.07.2019 has requested Committee considered the case as per the application is forwarded to the concerned of other usual 144.

Case No. 128

dated F. No. 01/841171/00135/AM201DES.V 1. Ladies Jacket with Hood made of 100% Polyester Dyed Woven Fabric GSM 88 and 100% Polyester Dyed Woven Fabric GSM 81 (Tolerance +1- 10%) Style No. FL201 0 Decision: Mis. Shahi Exports Pvt. Ltd. vide their letter dated 01.07.2019 has requested for above said export product under Special Advance Authorisation. Committee considered the case as per the application is forwarded to the concerned of other usual 145.

Case No. 129

Mis. Bright Choice Overseas (SPL) dated F. No. 01/84/171/00136/AM20/DES.V 20.06.2019

para 4.04(a) 1 FTP 2015-20:

Mens Jeans Pants made out of 71% Cotton 4% Polyester 7% Modal 17% Coolmax 1% Lycra Woven Denim Fabrics GSM 355 (+1- 10%) Width: 60/62" (+1- 10%) Decision: Mis. Bright Choice Overseas vide their letter dated 02.07.2019 has requested for above said export product under Special Advance Authorization. Committee considered the case as per other details provided in this case, the Committee approved the input quantity 34000 SQ MTR of the export product. The copy of the application is forwarded to the concerned RA for further necessary action and compliance of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation the norms again. 146.

Case No. 129 (A)

Mis. Jindal Poly Films Ltd. dated F. No. o 1/84/050100 I79/AMI 8IDES.V 20.06.2019 Adv. Authorisation No. 0510403977 dated 08.09.2017 ~39

Decision: Committee considered the case as per agenda along with other relevant papers and observed that "-l firm's representation dated 07.03.2019 and have requested for higher wastage against the above said Adv. Authorisaton which was decided by NC in its meeting No. 9/84 dated 02.08.2018. Committee decided to re- fixation of norms taking cue from J-370 and allowed norms for import items No.( I) 214S.2 MT, No.(2) 115.0S MT and No. (3) 76.72 MT on input of the export product. RA concerned may take necessary action subject to compliance of other usual conditions. 147. Case No. 129 (B) Mis. c.i. International NC Meeting No. 061AM20 dated F. No. o IIS4/050/00203/AM I9fDES.V 20.06.2019 Adv. Authorisation No. 0510403334 dated 05.07.2017 Decision: Committee considered the case as per agenda along with other relevant papers and observed that firm's representation dated 18.06.2019 and have requested for re-fixation of norms which was decided by NC in its meeting No. 12/84 dated 13.09.2018. Committee decided to send the representation to DPIIT for their comments. The case stands deferred for re-listing on 12.09.2019. 148. Case No. 129 (C) Mis. Ballistic Safety System Technology (I) P. Ltd. NC Meeting No. 06/AM20 dated F. No. 01/84/050/00419/AM15/DES.V 20.06.2019 Adv. Authorisation No. 091006160 I dated 10.02.2015 Decision: Committee considered along with other relevant papers and observed that firm's representation dated 05.07.2019 for fixation of norms as their case was rejected by NC in its meeting No. 14/84 dated 16.07.2015 due to non -submission of reply. Committee observed that CAD does not indicate matrix length, width and no. of bundles (Garments) made under the respective CAD. Committee is unable to calculate the requirement and decided ask the firm to furnish the above requirement of the Committee. The case stands deferred for re-listing on 12.09.2019. 149 Case No. 129 (D) Mis. Kesh Knitwear NC Meeting No. 06/AM20 dated F. No. 01/84/050/00059/AMI 8IDES.V 20.06.2019 Adv. Authorisation No. 3110066703 dated 18.04.2017 Decision: Committee considered the case as per agenda along with other relevant papers and observed that firm's representation dated 10.09.2018 for the following correction which was decided by NC in its meeting No. 12/84 dated 14.09.2017. I From 1~~ONJ-161 I : SION J-16 Committee agreed the firm's request and decided to correct the above. read as SION J -161. RA concerned may take necessary action subject to compliance of other usual conditions. 150. Case No. 129 (E) Mis. Grindwell Norton Ltd. NC Meeting No. 06/AM20 dated F. No. 01/84/050/00186/AM12/DES.V 20.06.2019 Adv. Authorisation No. 0710081890 dated 30.08.20 II Decision: Committee considered the case as per agenda along with other relevant papers and observed that firm's representation dated 08.05.2019 for fixation of adhoc norms against the above said Adv. Authorisation which was decided by NC in its meeting 27/84 dated 06.10.20 II. Committee decided to confirm RA to check name of the firm as they stated that the company name is "Grindwell Norton Ltd. 151. Case No. 129 (F) Mis. Kerala Balers P. Ltd. NC Meeting No. 06/AM20 dated F. No. 01/84/050/00383/AM18/DES.V 20.06.2019 Adv. Authorisation No. 10 I0059893 dated 21.02.2018 40

Decision: Committee considered the case as per agenda along with other relevant papers and observed that firm's representation dated 30.01.2019 for ratification of norms against the above said Adv.Authorisation as their case rejected by NC in its meeting No. 9/84 dated 02.08.2018 due to non-submission of reply. Committee decided to fixation of norms taking cue from K-83 and allowed norms for import items No.( 1) 1.05 kg/kg content in export, No.(2) 1.05 kg/kg content in export on input of the export product. 152.

Case No. 129 (G)

F. No. o 1/84/050/00029/AM12/DES.V Mis. Shital Fibres Ltd. NC Meeting No. 06/AM20 dated 20.06.2019 Decision: Committee considered other relevant papers and observed that dated 29.12.2018 to amend the balance export obligation to read as "216918 kg dyed printed synthetic blankets made of 100% polyester filament yam subject to account for difference of custom duty, if any, by switching to polyester filament yam from Acrylic fibre against above said 8 Adv. Authorisation clubbed into Adv. Authorisation No. 3010091497 dt.29.01.2013 due to devastative fire accident took place on 12.06.2006 and another on 15.04.2012 in their factory premises. Committee also observed that firm's representative also appeared before NC on 30.05.2019 and explained their case above. The matter was examined and the Committee observed that the un-utilized quantity of raw materials is as under: 1. Acrylic fiber-199455.29 KG ii. Polyester Filament Yam: 12928.29 KG The applicant has requested for shifting the SION from existing J-32 to J-30, on the ground that the Customs Duty on both the items is same. After examining the case, the Committee observed that the applicant's request for shift to J-30 in order to save interest on the Customs Duty. It was observed that this is not possible. Customs cannot waive interest on Customs Duty just because the exporter is exporting same other product. Therefore, the Committee did not accede to the request of the firm. 153

Case No. 129 (H)

MIs. Manju International NC Meeting No. 06/AM20 dated F. No. 01/84/050/00301/AMI 8/DES.V 20.06.2019 Adv. Authorisation No. 0210208098 dated 04.01.2018 Decision: Committee considered other relevant papers and observed that dated 29.12.2018 for fixation of norms as per amendment sheet issued by RA, Kolkata on 12.07.2019 and also observed that the case was rejected by NC in its meeting No. 10/84 dated 16.08.2018. Committee decided to ask the firm to furnish the following information: I. To indicate width of fabric to be imported or Quantity of fabric in square meter, 2. Calculation for requirement offabric giving CAD/CAM/Layout and efficiency. 154

Case No. 129 (I)

M/s. Satti Kusumgar India P. Ltd. NC Meeting No. 06/AM20 dated F. No. 01/84/050100143/AMI7IDES.V 20.06.2019 F. No. 01/84/050/00 141/AM 17/DES.V Adv. Authorisation No. 0310805559 dated 16.06.2016 Adv. Authorisation No. 0310805560 dated 16.06.2016 Decision: Committee considered other relevant papers and observed that dated 01.06.2019 for fixation of norms against the above two Adv. Authorisation, rejected by NC in its meeting No. 17/84 dated 24.11.2016. Committee decided to ratify norms on repeat basis with the Advance Authorisation No. 0310804060 dated 20.04.2016 decided by NC in its meeting No. 16/84 dated 10.11.2016. 155. J};v41

Case No. 129 (J)

Mis. Global Mode and Accessories P. Ltd.

dated F. No. 01/84/050/00040/AM191DES.V 20.06.2019 Adv. Authorisation No. 0510406020 dated 28.03.2018. Decision: Committee considered other relevant papers and observed that dated 07.07.2019 for re-open the case as their case was rejected by NC in its meeting No. 8/84 dated 19.07.2018 due to non submission of reply. After detailed deliberation, Committee observed and decided to ask the firm to furnish the following: 1. CAD is not found in enclosed documents, 2. PH before NC to explain their case, 3. Justification for requirement The case stands deferred for re-listing on 12.09.2019 156.

Case No. 129 (K)

MIs. Beeku Exports F. No. 01/84/050/00156/AM19/DES-V 20.06.2019 Adv. Authorisation No. 0410163686 dated 13.1 1.2017. Decision: Committee considered other relevant papers and observed that dated 18.07.2019 for re-fixation of norms for the export product Sl. No.2 & 3 as the quantity allowed for inputs is low against the above said Adv. Authorisation which was decided by NC in its meeting No. 11184 dated 30.08.2018. Committee reviewed the request of the applicant and also going through CAD, Sample submitted and agreed to allowed 3.12 square mtr. IPiece for item No.2 i.e. Men's Full Sleeve and 3.0 square meterl piece for Men's Half sleeve on input of the export product. 157.

Case No. 129 (L)

Mis. JPM Exports P. Ltd. F. No. 0 1/84/050100219/AM 17/DES-V 20.06.2019 Adv. Authorisation No. 0210206882 dated 28.03.2018. Decision: Committee considered other relevant papers and observed that dated 26.06.2019 for fixation of norms against as their case was rejected by NC in its meeting No. 09/84 dated 03.08.2017 due to non -submission of reply. Committee observed that applicant has stated they have attached the CAD but the same was not found with the papers submitted by applicant. Hence, Committee unable to work out the requirement and decided to ask the above requirement. The case stands deferred for re-Iisting on 12.09.2019 158.

Case No. 129 (M)

MIs. Panorama Exports Ltd. F. No. 01/8411 7 1I00072/AM20/DES-V 20.06.2019 Special Adv. Authorisation No. 0510410818 dated 04.06.2019. Decision: Committee considered other relevant papers and observed that dated 31.07.2019 for minor amendment to add the word "Yam Died" in both import and export item description in Bill of Extry, as the objection raised by Custom Appraiser that the fabric is 'Yarn died'. The raw material has been cleared by the Custom against the above said Special Adv. Authorisation. Request of applicant has considered by NC and after having gone through the paper submitted, observed that applicant had imported the fabric and export the garments, Whether the fabric is yam dyed lundyed, it does not make any difference in requirement of fabric per piece of each garments. As such the NC agreed with the request of applicant. 159. I Case No. 129 (N) I MIs. Global Stellate ¢--- 42

dated I F. No. o 1/84/050100347/AM I8IDES-V v'
Adv. Authorisation No. 3010104186 dated 15.12.2017. Decision: Committee considered other relevant papers and observed that dated 15.07.2019 for review the quantity of norms decided by NC in its meeting No. 24/84 dated 01.03.2018 as the quantity amended by RA on 20.12.2018. Committee observed that paper submitted by applicant are illegible. Further the CAD submitted by them mentioned the width as 1.54 mtr & length has 335 mtr which works out to 5.159 SQM. In the absence of pieces of garments made under the above CAD it leads not where to work out the requirement per piece. NC decided to the applicant may give proper CAD mentioning length, width, not bundles and also submit "bill of entry, shipping bill for the respective Adv. Authorisation to verify the quantity of export limport. The case stands deferred for re-listing on 12.09.2019 160.

Case No. 129 (0)

Mis. Superhouse Ltd. F. No. o 1/84/050100473/AM16IDES-V 20.06.2019 Adv. Authorisation No. 0610038273 dated 09.12.2015. Decision: Committee considered the case as per agenda along with other relevant papers and observed that dated 16.07.2019 for fixation of nroms as their case was rejected by NC in its meeting No. 15/84 dated 27.10.2016 due to non-submission of reply. Committee decided to ratify the norms for the above advance authorization as applied for. 43

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.

Citation copied