DGFT Committee Minutes

DIRECTORATE GENERAL OF FOREIGN TRADE (DES-II SECTION) MINUTES OF THE NORMS COMMITTEE-II MEETING No. 14/81-ALC2/2021 (NC/2/MEET/Jan/202021130) DATED 09.02.2021 (Held on 12.02.2021) Please Note i. For information of exporters, Norms Committee-II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80, 85. Communications in respect of cases/pertaining to NC-I1 may be sent to email address: nc2.dgft@nic.in 11. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The concerned applicant/company may go through the same and respond accordingly. iii. Similarly, a scanned copy of the blank Standard Deficiency Format, which may find a reference in NC decisions, has also been attached in the end. This may also be referred to by the concerned applicant/company and may be responded accordingly. iv. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. v. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. Meeting No. 14/81 (NCI2/MEET/JanI202021/30) of Norms Cornmittee-Il for the year 2020-21 (Originally scheduled for 09.02.2021) held on 12.02.2021 through Video Conferencing under the Chairmanship of Shri Hardeep Singh, Additional Director General of Foreign Trade to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2015-20. The following members were present in the meeting:- SI. No. Name & Designation Department 1. Shri Sushi I Jangid, Scientist' B' MeitY 2. Shri Devendra Kumar Saini, ADG DoT 3. Shri Shaish Kumar, (TEC-I) Consultant 4. Shri V.c. Agarwal, (TEC-3) Consultant 5. Shri S. K. Bhatnagar, (SKB) Consultant In attendance 1. Shri Pranav Upadhyay, Dy. Director DGFT Minutes of the cases discussed in the meeting are as under: llpage~ ~ ~/PRANAV UPADHYAY 'i;3'q ~ IDepu~ Director ~ ~ ""'1 ~"11<'14 DirectorateGeneralof ForeignTrade ~ ~ I Dept!. of Commerce ~ ~'Govt.oflndla ~ '>lCA' • .rn ~ Udyog Bhawan;Naw Dalhi

MEETING NUMBER: 14/81-ALC2/2021 (NC/2/MEET/Jan/202021130) MEETING DATE: 09.02.2021 .Party Na;e:-SIECHEM !Meet No/Date: 14/8 I-ALC2/202 I TECHNOLOGIES PRIVATE 09.02.2021 LIMITED

• Status~ I Withdrawn I [Case No.: 14/7/81- (LC212020 HQ File 1:0I18110501006701 AM21 I RLA File :04/24/040100063/AM211 Lic.No/Date:041 0 166944 06.08.2020 'Decision: The Committee considered the case as per the agenda and noted that the case was already approved I jin Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of ' migration of data from 4.7 old Data Base to new DGFT's IT Portal. Therefore, the Committee decided to I withdraw the case from the agenda. I I IThe case is withdrawn.

---

Case No.: 17/8/81-

ALC212020 Party Name: NU-CORK PRODUCTS(P) LTO. ---r---

Meet No/Date: 14/81- .Status: ALC2/2021 IDeferred 09.02.2021 [HQ File ~LA File

-:Lic.No/Date:05lO413767 1:01/81105010071 8/AM2 II ,:05/24/040100743/AM201 102.03.2020 fi>eci~ion: The Committee c~nsid~dth-~-;s per agenda and-did-;d t~-s~ek from the apPlica~tto-'fU~iSh'I' Ifollowing information as per comments given by Consultant (TEC-3): 2 I. Weight of each of the imported and indigenous input, separately for each product, for the purpose of I material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input : in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 2. Use of export product. 3. To submit details of step-wise wastage. rThe case stands deferred. --- --------------' ~Case No.:27/8/81-ALC2/2020 Party Name: WINOMECHANIC IMeet No/Date: 14/81- Status: I PRlV ATE LIMITED ,'ALC2/2021 Deferred 09.02.2021 IHQ File --IRLA File --Uc.NolDate:0410167028 r-- :01/81/0501007281 AM21 I :04124/040/000841 AM21 I 103.09.2020 I

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (TEC-3): I, Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 2. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares, Raw Material I Consumables, 3. Specific use of import items at SI. No. I to 5 in export item, 4. To clarify why the export item at Sl. No. I & import item at SI. No. 1 are the same. 5. Process of manufacture of export item at SI. No.T. I [The case stands deferred, 21 Page ~vv-

-Icase No.:36/8/81-ALC212020 Iparty Name~ RAMESHWAR

Meet NolD;rte: 14/81- I STEEL ALC2/2021 I I 09.02.2021 ~~::50100737/A~2~1 ----------E0;:~/A~21-;-

lToga~e:08l0148532 I : I 4 Decision: The Committee considered the case as per agenda and noted that due to the launch of new IT Portal I the case was again referred to Consultant (TEC-3) on 11.02.2021 for examination & comments. However" comments have not been received yet. Hence, the Committee decided to wait for the comments and also,' .decided to ask from the applicant to upload all the relevant documents on DGFT's New IT Portal to examine the I ·case,if the applicant has not uploaded documents yet. The case stands deferred. Status: Deferred I r---------------------r-------------r----- i,case No.: 18/14/81-ALC2/2021 iparty Name: DHASH PV .Meet NolDate: 14/81- .Status: TECHNOLOGIES PRlV ATE ALC2/2021 'Approved LIMITED 09.02.2021

HQ File ,RLA File Lic.NolDate:071 0 117173 1:01/811050100812/AM211 1:07/24/040100194/AM2 II ;22.10.2020 ~--------------------------------------------------------------I [Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written Icomments given by Consultant (TEC-3) via email dated 31.01.2021 as under: i 5 1 ITCHS Export Item Quantity ITCHS Import Item Recommended ! Code Code Quantity Solare PV Junction PV CABLE 4.0 SQ.MM Box Junction Box for Solar Panels ( 57700 AS PER TUV EN5061 8 I 85359040 85446090 AND UL4703 148470 Meter Net Content of Numbers 1OOOV12000V 147000 MTR ofPV MARKING Cable) I, INote: , i 1. The export item i.e. Junction Box Assembly containing 147000 Meter of imported PV cable". 2. Type & size of cable will be same as used in export item. I iRA concerned may take suitable consequential action accordingly.

., -------·1 ,Status: I [Deferred ! ! I

Case No.:100/14/81-ALC212019

~ame: BHARAT HEAVY I.eLLA.- TRlCALS LIMITED

fRLAFile I: 11/24/0401000061 AM201 !ALC2/2021 109.02.2021

---

---

File 81/0501001981 AM201 -ILic.No/Date:lII002861O '05.08.2019

---

--

6 Decision: The Committee considered the case as per agenda and noted that due to the launch of new IT Portal the case was again referred to DHf on 11.02.2021 for examination & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the applicant to upload all the relevant documents on DG FT's New IT Portal to examine the case, if the applicant has not uploaded documents yet. 3lpage~

I party Name: LM WIND POWER [Meet No/Date: 14/81- Status: BLADES [INDIA] PVT. LTD. /ALC2/2021 Rejected I 09.02.2021 I fRLA File! r-L-ic-.N-o/-D-a-te-:0-7-1-0-1-13-3-7-6- r--- :07/24/040/00342/AMI8/ 101.06.2018 I

Case No.:75/5/81-ALC2/2018

rHQ File :0 1/811050/00283/AM 19/ 17 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-I) was sent to the applicant on 02.11.2020 followed by reminders on 119.11.2020 & 11.01.2021. However, no reply has been received yet. Therefore, the Committee decided to reject I the case under intimation to RA, Bangalore. ! RA concerned may take suitable consequential action accordingly. IParty Name: TPI COMPOSITES ~eet No/Date: 14/81-- INDIA PRlV ATE LIMITED ALC2/2021 09.02.2021 [Status:

IDeferred i ICase No.:29/8/81-ALC2/2020 r-: ,..---- ---1- HQ File RLA File Lic.No/Date:0410167038 :0 1/81/050/00730/AM211 !:04/24/040/00083/ AM211 !04.09.2020 I Decision. The Committee considered letter seeking certain I information as raised by Consultant (TEC-I) was sent to the applicant on 14.01.2021. However, no reply has I been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following I information within 15 days: 8 1. 2. "J. 4. 5. 6. 7. 8. 9. Net weight of total export product. Exact description, generic name of import item along with catalogue. Revised list of import with qty, indicating generic name along with specific name as indicated in I licence. Exact nature of import items namely raw material, component and consumable. Percentage wastage claimed on net content basis for each of raw material and justification for the same. List of consumables along with value. Details of indigenous input with their quantity. Percentage of non-volatile matter in various paints, hardner, resin and adhesive. SL NO.5 & II of the Standard Deficiency Format. I~'" N:~'IOIl4/81-ALC2Ii021 IIHQFile I :0 1/811050/00804/ AM211 --I Status: Deferred 'PartY Name: WELSPUN CORPIMeet No/Date: 14/81- ILTD. ALC2/2021 09.02.2021 9 ! Lic.No/Date:34 I0046490 I 22.10.2020 I

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (TEC-3): / RLA File :34/24/040/00200/ AM21/ I. Type of weld used to manufacture pipe. 2. Surface area of pipe to be coated. I 3. Thickness of each layer of coating as per purchase order. 4Ipage~c,,/

Status: '.Deferred

---

G I \

Case NO.:19/14/81-ALC2/2021-~arty

Name: MOOGAMBI A MET AL REFINERIES ALC2/2021 09.02.2021 fRLA Fil~ Lic.No/Date:071 0 1171S1 :01/SI/050100S13/AM211 1:07/24/040/00192/AM21~ _ ..3:.7.1~2020 _ 10 Decision: The Committee considered the ca-se;;-per agenda and noted that = to. the launch of new IT Portal, the case was again referred to Consultant (SKB) on 11.02.2021 .for examm.atlOn & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments an~ also, decided to ask from the applicant to upload all the relevant documents on DGFT's New IT Portal to examine the case, if the applicant has not uploaded documents yet.

-- -- ----- -~--~ t ~

iMeet-No/Dat-e-:-.1-4/S-I--- 'stat;;s: Deferred C N 358/14/81 arty Name: ABB INDIA I~ ase 0.:

IIALC2/2021 II ALC2/2018 IMITED 09.02.2021 HQ File fRLAFile---

-rLic.No/Date:071011273S '-1-- --- :01/S1/050101076/AM191 1:07/24/0401002S9/AMlSI \24.01.20IS I __ II Decision: The Committee considered the case as p;;:-~genda and not~d-that due to the launch of new IT Portal the case was again referred to DHI on 11.02.2021 for examination & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's New IT Portal to examine the case, if the applicant Meet No/D-a-te-: 1-4-/S-I-----IStatus: ALC2/2021 Deferred 09.02.2021 Iparty Name: DEW AN & SONS IIC"" No. ,3/14/81- ALC2120 19 HQFile ':0 1/S1/050100 I 0 I/AM201

Lic.No/Date:29I 0025405 04.06.2019 fRLA File 1:29/24/040100007/AM201

---

__ I 12 Decision: The Committee considered the case was again referred to MSME on 11.02.2021 for examination & comments. However, comments have I not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's !has not uploaded documents yet. I Case No., 105114/81-ALC2tiOI9-IP'"y N,mo;UKB- ELECTRONICS PRIVATE LIMITED HQ File ---IRLA File :0liS I10501002031AM201 1:05/24/0401002721 AM201 r::-

-, ' Status: I Deferred I 'Meet NolDate: 14/SI- lALC2/2021 09.02.2021 -c

• _ ...-- -- ----, Lic.No/Oate:0510411476 09.0S.2019 13 Decision: The Committee considered the case was again referred to MeitY on 11.02.2021 for examination & comments. However, the representative of MeitY informed that the case does not pertain to MeitY. Therefore, the Committee decided to refer the case I to Consultant (TEC-I) for examination & comments. I 5lpa~

-I·

Meet No/Date:14/81- ALC2/2021 :09.02.2021 Status: Deferred Party Name: WIELAND IMETALS INDIA PRJV ATE 'LTD. [HQFi~

RLA File ILi-c.No/Date:0710116357 14 LOl/81/050100498/AM211 _ :07/24/040100307/A~.1201 '22.04.2020 ----' _ IDecision: The Committee considered the case as per the agenda and noted that the applicant's reply was sent to I IMSME on 19.01.2021 for examination of the case. However, no comments have been received yet. Hence, the I 'Committee decided to wait for the comments. I iThe case stands deferred.

Case No.:4/5/81-ALC2/2020

.Party Name: BRIGHT METALS Meet No/Date:14/81- IINDIA PVT. LTD. IALC2/2021 09.02.2021 -~- ~.-- RLA File : 13/24/0401000 II1AM211 iStatus: IDeferred I ~ ----------,--- 1c~Date: 1310049585 I 05.06.2020 I r

HQ File :0 I18110501005831AM21 1 IDecision: Th~ Committee considered the case as per agenda and noted that a deficiency-letter seeking certai; I (SKB) was sent to the applicant on 05.11.2020 followed by a reminder on 13.01.2021. However, no reply has been received yet. Therefore, the Committee decided to send final reminder 115 ~tothe applicant for furnishing the following information within 15 days: I. What is the exact percentage of copper and zinc and also percentage of other elements in the export product? 2. What is the percentage of copper and zinc in the imported items and documentary evidence thereof? 3. Detail Technical note on manufacturing process including the relevant flow sheet. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of export item to be manufactured out I of these imported materials, wastage claimed at each stage of manufacturing with complete justification supported by documentary evidence. r -fCa~e No.:41/5/81-ALC2/2020

Party Name: HVR SOLAR I PRIVATE LIMITED IHQ File 'RLA Fil;-- ~----I::Tz.No/Date:05I0414551 ,:01/SI/050100620/AM211 :05/23/0401000651AM211 03.07.2020 -r--

Meet No/Date: 14/81- ALC2/2021 09.02.2021

Decision: The Committee considered 16 information (TEC-3) was sent to the applicant on 14.01.2021. However, no reply has I been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: I. Complete specification with wattage and electrical rating of cells imported with respect to each module. 2. Calculation of quantity required for each module.

I

Case No.:3/8/81-ALC2/2020-

-- TPartyName: TOSHIBA

'Meet No/Date: 14/8- TRANSMISSION & ALC2/2021 DISTRIBUTION SYSTEMS 09.02.2021 HQ File f,LA File

---

-1-L-ic.N-o-I-D-at-e:-0-91-0-0-69083 :01181/0501007041 AM21 1 :09/2410401002701 AM211 21.08.2020 IStatus: IDeferred r -I; Decision: The Committee considered information (TEC-3) was sent to the applicant on 14.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following 17 information within 15 days: I. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Copy of Advance Authorization. ,--,.------------

--

-c:-

---

Case No.:30/8/81-ALC2/2020

Party Name: TPI COMPOSITES IMeet NolDate: 14/81- !INDIA PRIVATE LIMITED ALC2/2021 09.02.2021 HQ File --IRLA File

-'Lic.NoIDate:041 0 167039 - ,--

:01l81/050100731/AM211 :04/24/040100082/AM211 104.09.2020 I I ~

Status: Deferred -, Decision: The Committee considered information (TEC-I) was sent to the applicant on 14.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following' information within 15 days: Net weight of total export product. Exact description, generic name of import item along with catalogue. Revised list of import with qty. indicating generic name along with specific name as indicated in licence. Exact nature of import items namely raw material, component and consumable. Percentage wastage claimed on net content basis for each of raw material and justification for the same. List of consumables along with value. Details of indigenous input with their quantity. Percentage of non-volatile matter in various paints, hardner, resin and adhesive. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 10. Starting from the specification of the export product, basic calculation as to how ofraw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 1. 2. 3. 4. 18 5. 6. 7. 8. 9. 7lpag~

fN .-"---'-_."-"."-" ! !Status: 1 iDeferred rCase No.:38/8/81-ALC2/2020 [Party N~~e: ICON POWER !Meet No/Dale: 14/81- SOLUTIONS PVT LTO ALC2/2021 I ;09.02.2021 IHQ Fi~ -

RLA File IILic.No/Date:OS104IS183 I:Ol/8110S0/00739/AM21/ !:OS/23/040/00170/AM21/ 11.09.2020 rD;cision: The Committee conside-;:-edthe -case~s per agenda anddecided to seek from -th-e-a-p-p-li-ca-n-t-to-fumish : 19 !following information as per comments given by Consultant (TEC-3): 1-' 2. To provide break-up of a set as the export item quantity is in sets. 3. What are the manufacturing activities involved? I 4. Specific use of each imported item in export item. S. Specific name of imported component wherever not mentioned. IThe case stands deferred. [Case No.:ll/I4/81-ALC2/202I rparty Name: JINDAL SAW LIMITED ,ALC2/2021 ,09.02.2021 [Status: Deferred

HQ File 01Date:0510415613 :01I/O~!0080~/AM21/ _ :05/~.~04~002S0/AM21/.__ _ .20~ __ . L_"" I 20 IDecision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish I following information as per comments given by Consultant (TEC-3): I. Manufacturing activity with stage-wise wastage. 2. To provide details of indigenous inputs. .The case stands deferred. 1g2~200~late-:-14/81----I'~~~~~e~- 109.02.2021 !,------1 Lic.No/Date:071 0 11720 I 28.10.2020

Case No.:201l4/81-ALC2/2021

Party Name: FCI OEN CONNECTORS LIMITED r-

HQ File :0 1/81/050/00814/ AM21 I RLA File :07/24/0401002131 AM21 I 21 IDecision: The Committee considered the case was again referred to MeitY & comments. However, comments have Inot been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the l apPlicant to upload all the relevant documents on DGFT's The case stands deferred . .~-

-.- .-,-, -

---

-.."--- .-..--

r- .- .

Party Name: LM WIND POWER Meet No/Date: 14/81- BLADES INDIA PVT. LTD. IALC2/2021 109.02.2021 r--------

-,------

HQ File IRLA File Lic.NolDate:3410045211 I 1221:01/8110S0100127/AM201 :34/24/040100092/AM201 14.06.2019 ID;cisio~: The Committee considered the case as per agenda and noted that a deficiency 'Iett-e-r-s-ee-k-in-g certain, (TEC-I) was sent to the applicant on 03.11.2020 followed by reminders on 119.11.2020 & 11.01.2021. However, no reply has been received yet. Therefore, the Committee decided to reject I the case under intimation to RA, Vadodara. action accordingly.

Case No.:29/14/81-ALC2/2019

Status: IRejected 8Ipag¥~

,!case No.:4123/S1-ALC212019-lparty Name: UNIY-ERSAL HEAT EXCHANGERS LIMITED :Me;t No/Date: 14/81- ALC2/2021 09.02.2021 ,Lic.No/Date:32I 0079361 124.01.2020 [Status: Deferred J HQ File IRLA File :0 I18110501004161AM201 :32/21/0401002091 AM201 ~----------------------- Decision: The Committee considered the case as per agenda and noted that DPIIT informed vide U. O. No.: P- 47011/351/2019- TSW dated 12.02.2021 that earlier the applicant's reply against deficiency letter is incomplete. Therefore, the Committee decided to seek again from the applicant to furnish following information, point-wise as per comments of DPIIT: I 23 I. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be importedlprocured from sources other than the license, if any, may I also be indicated. I 2. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidenceldrawings etc. iThe case stands deferred. ICase No.:9/5isl-=ALC2Iio20 --IParty N;;-e:G.LMETALLlCA IMeet NolDat;: 14/8 1--- PVT. LTD. ALC2/2021 09.02.2021 ·rSt;t~;~· IApproved -HQFile :0I18110501005881AM211 RLA File : 13/24/0401000121 AM21 I Lic.No/Date: 1310049588 10.06.2020 considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (SKB) via email dated 11.02.2021 as under: 24 ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Code No. Code Quantity I. Copper Scrap 1.03Kgs/Kg on net Brass Ingots 74040012 content of copper in the (Copper 57% & as per ISRI export of brass ingots 74032100 Zinc 43%) 100 MT I.03 Kgs/Kg on net 2. 79011100 Zinc Ingots content of Zinc in the export of brass ingots INote: 1. The export item should contain: copper 57% & Zinc 43% and the same may be added in the description of export item. RA concerned to check export obligation fulfillment status in earlier licenses & report to Head Quarter. 2. action accordingly. 9lpag~

r rase No.'42/5/81~ALC2/2020 IHQ File 25 :01/8110501006211AM211 Party Name: SUCHI FASTENERS PYT LTD r-

---

RLA File :34/24/0401000611 AM211 Meet No/Date: 14/81- Status: ALC2/2021 Deferred 09.02.2021 Lic.No/Date:3410046193 I 02.07.2020 Decision: The Committee considered the case as per the agenda and noted that the applicant's reply was sent to Consultant (TEC-3) on 08.02.2021 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. ICase NO.:4/8/81-ALC2/2020 I I I HQFile :0118110501007051AM211 Party Name: TOSHIBA TRANSMISSION & DISTRIBUTION SYSTEMS RLA File :09124/0401002711 AM211 Meet No/Date: 14/81- ALC2/2021 ,09.02.2021 .Status: Deferred Lic.NolDate:0910069084 21.08.2020

--

---

[Decision: The Committee considered .inforrnation as raised by Consultant (TEC-3) was sent to the applicant on 14.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Copy of Advance Authorization.

---

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by MeitY vide F. No.: W-211712021-IPHW dated 03.02.2021. (Copy enclosed) I action accordingly. I [The case stands deferred. I,Ca~e No.::i9/8/81-ALC212020 I HQ File 1271:01/811050100740/AM211 lOIPager IParty Name: FCI OEN CONNECTORS LIMITED IRLA File :07/211040100317/ AM211 iMeet No/Date: 14/81- --rstatus: iALC2/2021 Approved 09.02.2021 Lic.No/Date:071 0 116993 11.09.2020

[Status:

-- Approved ~~m~SHIV ALIK

Meet No/Date: 14/81- iBHviETAL CONTROLS LTD. ALC2/2021 09.02.2021

Case NO.:12114/81-

ALC2/2021

I RLA File :05/24/0401003651 AM211 r

---

HQ File o 1/81/050100806/AM211 _. Lic.No/Date:0510415614 23.10.2020

---

---

---

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on repeat basis as approved for AA No. 0510413468 dated 29.01.2020 as per written comments of Consultant (TEC-3) via email dated 31.01.2021 as under: Sl. ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended No. Code No. Code Quantity Thermostatic Bimetal Parts Namely Bimetal "Inner" -Grade 72( 1) Manganese H.E.Alloy72- Made of base alloys alloy with 72% (Cold 8538101 Manganese, 10% Nickel 200000 811100 I Rolled 9% wastage I 0 and 18% Copper- Number I 0 strips) Made allowed with 5% . 2500.00 kgs and 2)L.E. of high recovery Alloy 36- Made of alloy Expansion I with 36% Nickel & Alloy-72, balance Iron- (Alloy 72) 2500.00kgs(Total- 5000.00 kgs.) Thermostatic Bimetal Parts Namely Bimetal "Outer"- Grade 72(1) H.E. Alloy72- Made of Cold Rolled alloy with 72% Strips Made 8538101 manganese, 10% Nickel 200000 7226995 of low 9% wastage 2 0 and 18% Copper- Number 2 2 Expansion allowed with 5% 5882.00kgs and 2) L.E. AlIoy-36 recovery Alloy 36- Made of alloy (Alloy 36) with 36% Nickel & Balance Iron- 5882.00kgs (Total- 11764.00 kgs.) 28 IRA concerned may take suitable consequential action accordingly. r

---

Case No.:112/81-ALC2/2019

I I IHQFile 1:0 1181/05010000 I/AM201 RLA File I: 13/24/0401001391 AM 191 Meet NolDate: 14/81- ALC2/2021 09.02.2021 Lic.NolDate: 1310049241 127.03.2019 Party Name: GRAVITA INDIA ,LTD. Status: Deferred 29 Decision: The Committee considered information as raised by MSME was sent to the applicant on 02.11.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: I. Percentage of lead in import supported by Certificate of Analysis. I 2. Manufacturing process with step-wise wastage.

---

lllpage~

1 1- [Case No.: 126/14/81-Aic2/2019 'Party Na~e: GANGES --, IMeet No/Date: 14/81- - Status: --I' I IINTERNATIONALE (P) LTD. IALC2/2021 Approved I ,-0_9.02.2_0_2_1 ,- _ rHQ File -------mA File ':0 I181/0501002241AM201 :0412410401000901AM201 Lic.No/Date:041 0 1660 14 28.08.2019 130 fDecision: The Committee considered the case as per=-th;-ag;nda anddecided to fix the norms -;s per written 1 I [comments given by DPIIT vide U. O. No.: P-47011/90/2020-TSW dated 09.02.2021 as under: I I. 2. Import item shall be of relevant composition and thickness as contained/utilized in the export item. Quantity of import item may be allowed as 1.05Kgs/Kg content in the export item. IRA concerned may take suitable consequential action accordingly. fM~etNo/Date~14/81-

--'Status: IALC2/2021 IDeferred 109.02.2021 [Case No.:8120/81-ALC2/2019 ' Party Name: RATNA VEER METALS LIMITED -~- -------- HQ File RLA File ILic.No/Date:3410045719 131 rOIl81/050100360/AM~01 :34/24/0401002811AM201 18.12.2019 Decision: The Committee reply was sent to Con.sultant (TEC-3) on 08.02.2021 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. IThe case stands deferred.

Case No.:l1123/81-ALC2/2019

IParty Name: SHIVALIK IBIMET AL CONTROLS LTD r

I ALC2/2021 09.02.2021 IStatus: Deferred IHQ File ,RLA File Lic.No/Date:0510413469 I 1 :01/81/050/00423/ AM20/ F05/24/040/00692/ AM201 29.01.2020 I 132 fDeci~ion: The Com~ittee consid;red the cas;-as per the agenda -a;;-dn~ed that ;··copYoTapplic-ati~~ ;a;;e;t'to I IConsultant (TEC-3) via email on 22.11.2020 for examination of the case. However, Consultant (TEC-3) has [requested to send physical file of the case. Therefore, the Committee decided to send the same to Consultant (TEC-3) to examine the case. r ~ase No.:i3/S/81-ALC2/i-020

• • Party Name~ BLUE'HA-T I ISOLUTIONS PVT. LTD. -- ,HQ File RLA File :01/81/050100592/AM211 :07/24/040100075/AM211 33 ALC2/2021 09.02.2021 fLic.N~ate':OilOI1661i '16.06.2020 = Deferred I ,---

considered the case as per the agenda and noted that the applicant's reply was sent to ,MSME on 08.02.2021 for examination of the case. However, no comments have been received yet. Hence, the I committee decided to wait for the comments. 1 12lpag~

r:

-- IC"" No.:43/S/81-ALC212020 ~

Q File 1/8110501006221AM21 I r

RLA File 09/24/040100161/AM211 r----

Party Name: TOSHIBA TRANSMISSION & DISTRIBUTION SYSTEMS Meet No/Date: 14/8- ALC2/2021 109.02.2021

• -- ILic.No/Dcrte:091 0068926- 02.07.2020 Status: Deferred

---

Decision: The Committee considered letter seeking certain. (TEC-3) was sent to the applicant on 14.01.2021. However, no reply has' been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: ,..----------------

---

I. Weight of each Export Product. 2, Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated, 3, Use of import item at Sl. No, 12 in the export product. 4. Copy of Advance Authorization. I

Case No.:27/7/S1-

Party Nam;8IEMENS GAMESA Meet No/Date: 14/81-=- -- Status: --I ALC2/2020 RENEWABLE POWER PRIVATE IALC2/2021 Withdrawn LIMITED 109.02.2021 HQ File IRLA File :04/24/04oio0067/AM211 Lic.NoiOate:0410166956 I :01/81/050100683/AM211 . 114.08.2020 ;35 'Decision: The Committee considered the ~ase-as per th~ agend-;-an~oted that the c;se was already approved in Meeting No. 10/81 dated 10.11.2020 (held on 17,I 1.2020) as the case was relisted in the meeting because of migration the Committee decided to The case is withdrawn. [Cas-; No.:9/S/Sl-ALC2/2020 -[party Name:-APAR I IINDUSTRlES LIMITED Status: Deferred IHQ File 1:0I18110501007I01AM2 II RLA File 1:34/24/040100121/AM211 Meet No/Date: 14/81- ALC2/2021 09.02.2021 Lic.No/Date:34I 0046325 '26.08.2020 Decision: The Committee considered letter seeking certain i information as raised by DPIIT was sent to the applicant on 14.01.2021. However, no reply has been received; 36 yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: I, Detailed calculations for the quantities of import items supported by the cross sectional diagram of the export product. 2. Difference between the import items at SL. No. I & 3 with their specific uses.

Party Name: KEI INDUSTRIES I[MeetNo/Date: 14/81- IStatus: LIMITED ALC2/2021 [Approved 109.02.2021 I I HQ File RLA File ILic.NolDate:051 0415079 ~--I' 137 I:OI/811050/00722/AM211 :05/~3/040/00155/AM21/ __ 1~~09.2020__ _1 _ [Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written I I~omments given by DPIIT vide U. O. No.: P-470 11/95/20 19-TSW dated 08.12.2020. (copy enclosed) [case No. ,21/8/81- ALC2/2020 IRA concerned may take suitable consequential action accordingly. i ,caseNo.:4118/81-ALC2J2020 Party Name: ULTRA 'ENGINEERS I --

HQ File RLA File :01/81/050/00742/AM21/ :31/83/040100064/AM21/ ~ IA-~~;~~ed I -I I 'Meet No/Date: 14/81- ALC2/2021 '09.02.2021 Lic.No/Date:3110067852 14.09.2020 Decision' The Committee considered the case as per azenda and decided to fix the ad-hoc norms as per written b I comments of Consultant (TEC-3) via email dated 31.01.2021 as under: I ITCHS Export Item Quantity ITCHS Import Item Recommended Code Code Quantity Parts Of Structures- Assy, Gear Rack, Logo,52 DEG , C3- Part POSMAC (ZN- No 20568-000 (Consisting of MG-AL Coated) below item) A) Plate, Gear Rack, Steel Coil (Thik I I 73089090 (Logo, ZnALMg, C3 (For Mfg of 23189 721049 2.8 x Wid 662 MT 1 Number 00 I 23189 Assembly, Per Assembly 1500mm) C I Req 2 Nos 23189 * 2 =46378 Nos PM3HT490C/ I ) POSMAC -490 I (Weight = 505.40 MT) I I 38 Note: 1. The weight of export item is 505.40MT and the same may be added in the description of export item. 2. Grade of steel will be same as used in import & export item. action accordingly. r-Icase No.:150/14/81-ALC2/2019 rparty Name: WELSPUN CORP IMeet No/Date: 14/81- LTD. ALC2/2021 109.02.2021 I HQ File RLA File --ILic.No/Date:34I 0045461 r- b9 ~1I81/050/00248/AM20/ i:34124/040/00165/AM20/ 119.09.2019 _ Decision: The Committee reply was sent to Consultant (TEC-3) on 09.02.2021 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. I j IStatus: Deferred 14lpage~

r -- --------~ 'Meet NolDate: 14/81- !Status: ALC2/2021 Rejected 09.02.2021 Lic.No/Date:31 10067691 19.02.2020 ICm No.,24/23/81-ALC2/2019 I HQFile :01/8110S0/00436/AM20/ Party Name: TECHNO TRAK ENGINEERS r:

.- :RLA File :31/83/040/00 IS6/AM20/ 40 Decision: The Committee considered information as raised by DPIIT was sent to the applicant on 21.09.2020 followed by reminders on OS.II.2020, i 19.11.2020 & 13.01.2021. However, no reply has been received yet. Therefore, the Committee decided to reject I the case under intimation to RA, Pune. ' action accordingly.

Case No.:44/5/8J-ALC2/2020

:Party Name: TOSHIBA 'ITRANSMISSION & ALC2/2021 DISTRlBUTlON SYSTEMS :09.02.2021 .-----------------------.-----------------------~---- ----------.------1 HQ File RLA File Lic.No/Date:0910068927 :0 118I/OSO/00623/AM211 :09/24/040/001 S2/AM2 II ,02.07.2020 , IDecision: The Committee considered the case a~~r agenda and noted tha~deficiencYl~tter seeking certain (TEC-3) was sent to the applicant on 14.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within IS days: Status: Deferred I. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose I of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Copy of Advance Authorization. 41 I

Case No.:ll/8/81-ALC2/2020

-rarty Na~e: PONDY OXIDES -M-ectN-o/O-at-e:14/81- AND CHEMICALS LIMITED ALC2/2021 I

---

__ _

---

. _ 09.02.202,- _ ~e RLA File Lic.No/Date:0410167001 I.OI/81/0S0/00712/AM211 F04/24/040/00072/AM211 27.08.2020 42 fDecision: The Committee considered [the case was again referred to MSME on I 1.02.2021 for examination & comments. However, comments have I not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's I Status: Deferred lSIPag~~

rCase No.:22/8/Si-=ALC212020 ! IParty N";me: VRAJSYSCOM

rMeet NolDat;;J4;Sl=- ---'IStatus: ...~ - 1 IPRlV ATE LIMITED !ALC2/2021 Deferred ' '09.02.2021 _ _ t IHQ File IRLA File ,Lic.No/Date:24I 0043223 1:0liS I1050/007231 AM21 I :24/24/0401000371 AM21 I 101.09.20~0 _ _ _ 43 Decision: The Committee considered the case was again referred to DPIIT & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's New IT Portal to examine the case, if the applicant 1 .has not uploaded documents yet. lThe case stands deferred. [party N;me: AMPCO METAL -IM;et NolDate:14/S1---

• Stat~: I INDIA PRIVATE LIMITED ALC2/2021 Deferred 109.02.2021 rRLA File

-----,Lic.No/D-a-te-:-3-11-o-o-67-S-44-r-- 1:311S3/040/00052/AM211 07.09.2020 Ie"" N0.,33/8/81 ~ALe2/2020 , IHQFile 44 :0 IIS I1050/007341 AM2_1I .Decision: The Committee considered the case as per agenda and noted that the applicant's reply was sent to the 'MSME on 09.02.2021 for examination & comments. However, no comments have been received yet. Hence, 1 the Committee decided to wait for the comments. I Meet N-o-lD-a-t-e:-1-4/-S-I----IStatus: ALC2/2021 Deferred , 09.02 .'2021 I I"?"

--

,------1 HQ File RLA File Lic.NolDate:0510415219 i451:01lS~050/~~743/AM211 1:05/23/040/~0168/AM2~ __ 115.09.2020 _ _ __ I _ _ __ r iDeciSion: The Committee considered the case as per agenda and noted that the applicant's reply was sent to the MSME on 09.02.2021 for examination & comments. However, no comments have been received yet. Hence, I the Committee decided to wait for the comments. I !The case stands deferred. r-fCase No.:42/8/81-ALC212020 -[Party Name: C. L. GUPTA EXPORTS LTD. r---

-_ I

case No.: 1I14/81-ALC212021

Iparty Name: SHREENATHJI Meet NolDate: 14/SI- Status: INDUSTRIES ALC2/2021 jDeferred 09.02.2021 , rHQ File

'RiA File

------fLic.NoiD~t~:24100i32sS

• r -- 1 :0 liS 1I050/00795/AM211 :24/24/040/00056/AM211 119.10.2020 46 [D;cision: The Committee considered the~se ~ per agenda and noted that due to the launch of new IT Portal' I ,the case was again referred to DPIIT & comments. However, comments have 'not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the 'appl icant to upload all the relevant documents on DG FT' s New IT Portal to exam in, tho case, if tho applicant I

---

---

16lpag~

I ~ "------ ---------"""---- Q File 181/0501008081 AM21 1 I RLA File :07/24/0401002061 AM21 1 :Lic.No/Date:0710lI7161 :21.10.2020

---

---I

'Status: ALC2/2021 ,Approved 09.02.2021 i

Case No.:14/14/S1-ALC2/2021

iParty Name: EFD INDUCTION 'PRIV ATE LIMITED Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written 47 comments given by MeitY vide F. No.: W-21130/2020-IPHW-MeitY dated 10.12.2020 as under: I. Quantity of import items at Sl. No. 1 to 4 may be allowed on net to net basis with accountability clause. 2. Quantity of import items at SI. No.5 to 10 may be allowed as applied for on nil wastage. action accordingly. ---------------------------------------~ I

Case No.:23/14/SI-

!party Name: CONSOLIDATED fMect No/Date:14/81- ALC2/2021 ICOIN COMPANY PRlV ATE ALC212021 LIMITED 109.02.2021

---

---

-- I HQ File IRLA File :01l811050100817/AM211 :05/23/040100255/AM211 IStatus: IApproved Lic.No/Date:0510415694 129.10.2020

---

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on the basis of study group report dated 21.02.2020 as adopted by the Committee in the Meeting No. 24/81 dated 18.3.2020 for import items at SL. No. I & 2 as per written comments of Consultant (TEC-3) via email dated 31.01.2021 as under: ITCHS Export Item Quantity SI. ITCHS Import Item Recommended Code No. Code Quantity Copper Scrap Berry I. I I Kgs/Kg content Coin Blanks 1 74040012 As Per ISRI (Cu in the export product (Consisting Of 47000 99.90%) 74199990 Copper-92%, Kgs 1 75021000 Nickel (Ni 99.90%) 1.08 Kgs/Kg content Nickel-2% And in the export product AIuminium-6%) 1 76011010 Aluminium Ingots 1.04 Kgs/Kg content I (AI 99.70%) in the export product 'Note: Nickel is allowed to be imported In primary form only. I IRA concerned may take suitable consequential action accordingly.

• -.--.- .~.-.
• .. --- --. ..,..,.,--,.-,. --

Case No.:77!14/S1-ALC212019

Party Name: LM WIND POWER !Meet No/Date: 14/81- BLADES INDIA PVT. LTD iALC2/2021 09.02.2021 [Status: [Rejected IHQ-Fil~

---

;R.LAFile - Lic.No/Date:34 10045293

--

1:01181/050100 I75/AM201 1:34/24/0401001 28/AM201 17.07.2019 49 Decision: The Committee considered the case as pe~ agenda and note-d that a deficiency (TEC-I) was sent to the applicant on 03.11.2020 followed by reminders on 19.11.2020 & 12.01.2021. However, no reply has been received yet. Therefore, the Committee decided to reject the case under intimation to RA, Vadodara. action accordingly.

17lpage~

( -Icase No.: 17/S/81-ALC2/2020

• ~iP_a_rty_N_a_m_e_: F_C_I_O_E~N~-""-' -·-r,..M_ee_t_N_O_ID_at_e: 1_4_/8_1_- __ -_r~f:~a~ -II lCONNECTORS LIMITED 1~~i200}11 I' Ir- _ I HQ File IRLA File ILic.No/Date:0710116623 :01/811050100596/AM211 ':07/24/040100074/AM211 18.06.2020

---

0_" ~ __ w _ 150 :Decision: The Committee considered the case as per the agenda and noted that the case was already approved in' Meeting No. 11181 dated 24.11.2020 (Held on 01.12.2020) as the case was relisted in the me~ting bec~use of I migration the Committee decided to! ,- r

Case No.: 1S/8/81-ALC2/2020

[;IMeetNo/Date: 14/81- ALC2/2021 09.02.2021 Status:------ ! Deferred 'Party Name: TOSHIBA 'TRANSMISSION & IDISTRIBUTION SYSTEMS ,---------------------- IRLA File ,:09/24/04010050 I1AM201 !Lic.NolDate:091 0068356 109.01.2020 HQFile :01/81/0501007 I6/AM211

Decision: The Committee considered (TEC-3) was sent to the applicant on 12.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: I. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of! 5 I material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in I the export product may be indicated. Net weight along with details of other imported input to be used in I I the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. For import item at Sl. No.3: Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with , complete justification and supported by documentary evidence/drawings etc. ' 4. Use of import item at SI. No. 12 in the export product. 5. Copy of Advance Authorization. I IStatus: ALC2/2021 IDeferred 109.02.2021 r---------------- Lic.No/Date:241 0043224 0l.09.2020 52 Decision: The Committee considered the case was again referred to DPIIT on 11.02.2021 for examination & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's liThe case stands deferred.

--- --- ---~----------,---~~ 18,pag~

IMeet NolDate: 14/81- ALC2/2021 109.02.2021 'Lic.No/Date:34I 0046379 07.09.2020

Case No.:34/S/SI-ALC212020

Party Name: RYKER BASE PRIVATE LIMITED Status: Approved HQFile 1:01/811050100735/AM211 ~

LA File 4/24/0401001451 AM21 I

---

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written 53 'comments given by Consultant (TEC-3) via email dated 11.02.2021 as under: ITCHS Export Item Quantity ITCHS Import Recommended Quantity Code Code Item 74081190 Copper Wire Rod 222 MT 74031100 Copper As applied with 0.55% (8 mm) Cathode wastage IRA concerned may take suitable consequential action accordingly. ICase-N-o-.:-4-/1-4-/S-I--A-L-C-2-12-0-2-1 -Iparty Name~ NA VG RAH FASTNERS PVT. LTD. Status: Deferred Meet No/Date: 14/81- ALC2/2021 09.02.2021 Lic.NolDate:52I 0043570 21.10.2020 [HQ File 1:0118110501007981AM211 RLA File :52/24/0401000571 AM211 54 Decision: The Committee considered the case was again referred to DPIIT on 11.02.2021 for examination & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the lapplicant to upload all the relevant documents on DGFT's ,-

Case No.:16/14/SI-

ALC2/2021 -IParty Name: ADVENT METAL 'Meet No/Date: 14/81- IPROFILE PRIVATE LIMITED ALC2/2021 09.02.2021 Status: Approved HQFile 1:01/81/0501008101 AM21 I

I RLA File :56124/0401000281 AM21 I I Lic.No/Date:56I 0005975 26.10.2020 55

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written, comments given by Consultant (TEC-3) via email dated 11.02.2021 as under: ITCHS Export Quantity Sl. ITCHS Import Item Recommended Quantity I Code Item No. Code I 72230092 S.S WIRE 0.7 MM 410 1.0 I Kgs/Kg content in the export product 73231000 S. S. 310 MT 2 72230099 S.S. WIRE 0.15 MM 410 1.0 I Kgs/Kg content in Scrubber the export product I 3 72230099 S.S. WIRE 0.13 MM 410 1.0I Kgs/Kg content in I the export product Note: Grade & diameter will be same as used in export item. I action accordingly. 19lpag~

I r- rCase No.:2S/14/81-Aic212021 Ilparty Nam;-RAJHANS IMPEX 'IMeet N-o/D;t~: 14/81- '-lStatus~-- --I I PRIVATE LIMITED !ALC2/2021 IDeferred I I I ' 109.02.2021 , jHQ File fRLA File-

Lic.No/Date:2410043298- I 156 :01l811050100819/AM211 _ 1:24/24~040100059IMv'~211 _ 128.10.2020 _ _ --I I jDecision: The Committee considered l information (SKB) was sent to the applicant on 09.02.2021. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the applicant. I IThe case stands deferred. I Meet No/Date: 14/81- ! ALC2/2021 09.02.2021 J HQ File IrRLAFile -~-ILiC.No-I-D-at-e-:0-7-1O-1-1-5-21-8-r--- -I :0 1/8110501001861 AM201 :07/24/0401000901 AM201 26.07.2019 I

__ -I [Decision: The Committee considered iinforrnation as raised by DPIIT was sent to the applicant on 03.11.2020 followed by a reminder on 12.01.2021.; I However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the applicant for furnishing the following information within 15 days: I I. Detail technical note on manufacturing process including the relevant flow sheet. 157' 2. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may I also be indicated. 4, Starting from the specification of the export product, basic calculation as to how ofraw material proposed for import has been arrived at, including the net weight of components to be manufactured out ofthese imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Party Name: UNIVERSAL FLEXIBLES PVT. LTD. Status: .Case No.:88/14/81-ALC212019 I IDeferred [Case No~ll/7/81- ALC2/2020 Party Name: SIEMENS GAMESA Meet No/Date: 14/81- 'Status: RENEWABLE POWER PRJVATE IALC2/2021 IWithdrawn LIMITED 109.02.2021 [ HQ File --

IRLA File :04/24/040/00059/AM211 [Lic.No/Date:0410166931 --r--- :01l81/050/00667/AM211 I 130.07.2020 58 Decision: The Committee considered the case as per the agenda and noted that the case was already approved I [in Meeting No. 10/81 dated 10.1 1.2020 (held on 17.1 1.2020) as the case was relisted in the meeting because of migration the Committee decided to I [The case is withdrawn. 201Pag~

rcase No.: 16/S/SI-ALC212020 -rp;rtyNam;-NAVGRAH tASTNERS PVT. LTD. Status: Deferred ALC2/2021 09.02.2021 I [HQFile

• fRLAFile-

Lic.No/Date:5210043332 I 1:01/81/050100717/AM211 1:52/24/040100070/AM201 14.02.2020 , 59 Decision: The Committee considered the case as per the agenda and noted that the comments given by DPIIT I vide U. O. No. P-47011/160/2020-TSW dated 11.12.2020 wherein the norms have been recommended as per ,SION C-888. Further, the Committee noted that SION C-888 was suspended vide PN No. 56/2015-20 dated 14.01.2020. Therefore, the Committee decided to examine the case on file. I,The case stands deferred.

I

---

J

-r----

ALC2/2021 09.02.2021 Lic.No/Date:5210043530 09.09.2020 IStatus: IApproved

Case No.:35/S/Sl-ALC2/2020

Party Name: PESHWA ENGINEERlNG & WIRE COMPANY HQ File :01/81/0501007361 AM21 1 RLA File :52124/0401000351 AM21 1

---

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (SKB) via email dated 11.02.2021 as under: 60 I ITCHS Export Quantity Sl. ITCHS Import Item Recommended Quantity Code Item No. Code Redrawn Galvanized 1.0IKgs/Kg ofGI wire Iron Wire of relevant I 72172030 grade and dia meter content in export G I Wire 998020 0.35 to O.SOmm product. 73141910 Meshl Kgs Paper Tubes (Length Netting 600 mm to 1235 mm) 2 48229010 (packing material) 10 Net to net 76 to 205mm INote: I. Diameter of import item at S1. No.1 should be of range of 0.35 to O.SOmm and the same may be added in the description of the import item. 2. Inner Diameter of import item at S1. No.2 should be of range of 76 to 205mm and the same may be added in the description of the import item. action accordingly. 21lpage~

,case No.:6/14/81-ALC212021 IHQ File :0 1/81/050/00800/ AM21 / rParty Name: APAR INDUSTRIES LIMITED , ALC2/2021 109.02.2021 ,----------------------- IRLA File Lic.NolDate:3410046488 :34/24/040/00198/ AM21/ 21.10.2020 Status: Approved

_.- Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written .comments given by Consultant (TEC-3) via email dated 11.02.2021 as under: II ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Code No. Code Quantity
Aluminium Conductor I 76011010 Aluminium As applied with , Composite Core ( Accc)(Net Ingots 1% wastage Content: (I) Aluminium II Ingots: 1949.900 MTS (2) Articles Of 76149000 Articles Of Graphite ( 1700000 Graphite ( Carbon Fiber Composite Meter Carbon Fiber As applied with , 2 85459090 I Core In Various Sizes) : Composite 1% wastage , 166.600 MTS ( 1700000 Core In I Meter), Total Weight: Various Sizes) 2116.500 MTS) i 61 action accordingly. ,I case No.: Iparty N-a~e: COPRAL ~eet No/Date: 14/~ rst;"tus: 62fNC/2/MEET/Jan/202021130 ENERGY PRIVATE LIMITED ALC2/2021 I. Deferred 09.02.2021 I fHQ File: IRLA File: -ILic.NolDate~0410114089-1

,OI/811050/00046/AMII 104/24/040/00040/AMII 28.05.2010 i 162 rDecisi~n: The Committ~e co-;:;sideredthe case as pe-;:the agenda an~otedthat the~ase is automatically listed in the meeting and is showing pending since 20 I0 due to unavailability of complete set of application. Further, it is noted that no record is available with the section regarding the case. Therefore, the Committee decided to ask for Ithe details of the case from RA, Chennai. [The case stands deferred.

---

'Icase No.:95/14/81-ALC212019 !Party Name: METAL CARE ,Meet NolDate:14/81- ! ALLOYS PRIV ATE LIMITED IALC2/2021 09.02.2021 Status: Deferred I HQFile :01/81/050/00193/ AM20/ RLA File :03/95/040/00400/ AM20/ Lic.No/Date:0310830743 01.08.2019 1 63 ~eCiSion: The-Committee considered the case as pe~ ;genda and noted the comments of Consultant (SKB) via I email dated 11.02.2021. Further, the Committee noted that the norms are exiting for similar/same items at SION I C-15:5. Therefore, the Committee decided to refer back the comments to Consultant (SKB) for clarification/re- exammation. .The case stands deferred. 22lpag~

r caseNo.:11/15/81-ALC2/2019 PartyNa~e: SHIVAM IRON AND STEEL COMPANY ALC2/2021 LIMITED i09.02.2021 RLA File

ILi~.NolDate:021 0209475------ :02/24/0401000991 AM201 14.10.2019 Status: iDeferred 64Iro;Cisio~:The Co~mittee-consideredthe-case as per agenda and noted the comments of Consult AN (SKB) via email dated 11.02.2021. Further, the Committee noted that the recommended norms seem to beifill~her side as [compared with Similar SION. Therefore, the Committee decided to refer back the comments 10 Consultant (SKB) for clarification/re-examination. HQFile :0 1/81/0501002801 AM201 rStatus: Withdrawn

--

I HQ File :RLA File Lic.No/Date:0310834081 :01181/050100397 IAM201 1:03/94/0401008471 AM201 110.01.2020 65 ~Decision: The Committee-considered the case as per th~genda ;nd noted that the case ""wasalready approved in IMeeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to ---------~----I 'Status: Withdrawn

Case No.:7/22/81-ALC2/2019

Party Name: GALA PRECISION ENGINEERING PVT LTD. Meet No/Date: 14/81- ALC2/2021 09.02.2021 '66 [Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 13/81 dated 30.12.2020 (held on 08.01.2021) as the case was relisted in the meeting because of migration of data from 4.7 old Data Base to new DGFT's IT Portal. Therefore, the Committee decided to withdraw the case I from the agenda. IParty Name: UPR

ENGINEERING PRIVATE LIMITED RLA File :03/95/0401011851 AM201 II'" No.,22/1!8I-ALC2/2020 HQ File ,:01/81/050100480/AM201 Meet No/Date: 14/81- ALC2/2021 09.02.2021 Lic.No/Date:0310835465 17.03.2020 Status: Deferred

67lDecision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (TEC-3) via email on 04.11.2020 for examination of the case. However, Consultant (TEC-3) has requested to send physical file of the case. Therefore, the Committee decided to send the same to Consultant (TEC-3) to examine the case. iThe case stands deferred. ~-

[Party Name: WINOMECHANIC 'PRIVATE LIMITED I Meet No/Date: 14/81- ALC2/2021 09.02.2021 'Lic.No/Date.Od l0 166815 11.06.2020

Case No.:2/5/81-ALC2/2020

IHQ File 1:01181/0501005811AM2 II RLA File :04124/0401000301 AM21 1 23Ipage~~

ICase NO.:30/5/81-ALC2/2020 I Party Name: ICE STEEL! PRIVATE LIMITED Deferred I I HQ File -IRLA File Lic.No/Date:041 0 166845 .-----1 68 :0 1I8110~01006091AM211_ :04/24/0401000201 ~M21 I 25.06.2020 I Inecision: The Committee considered the case as per the agenda and noted that the applicant's reply was sent to I MSME on 09.02.2021 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. ' ALC2/2021 09.02.2021 Status: IThe case stands deferred. -I TMect No/Date: 14/81- IALC2/2021 ,09.02.2021 HQ File rRLA File -fLi~.No/D~te:0210209991 69 I~O1/81/0501006441AM21 I :02124/0401000461AM211 21.07.2020 Decision: The Committee considered letter seeking certain I information as raised by MSME was sent to the applicant on 07.12.2020 followed by a reminder on 11.02.2021. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the applicant. r

.-

Party Name: AXORA IRESOURCES LIMITED

• -rstat~s: IDeferred
• ~- -- --.--- lStatus: iALC2/2021 IWithdrawn 'I 09.02.2021 'Case No.:42/7/8J-ALC2/2020 Party Name: SKY LEAD IRLA File :03/95/0401003001 AM211 -ILic.No/Date:031 0837~-1--' 19.08.2020 I: fHQ File :01/81/050100698/AM211 70 Decision: The Committee considered the case as per the agenda and noted that the case was already approved 'in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of I 'migration of data from 4.7 old Data Base to new DGFT's the Committee decided to I ! I-I~'" ~O.'2:14/81-ALC212021 I HQ File :01181I050100764/AM2 II Iparty Nam;STERLITE POWER ITRANSMISSION LIMITED ALC2/2021 09.02.2021 IRLA File --

--fJ:Tc".N~/Date:0310838438 :03/95/040100222/AM211 24.09.2020 Status: Withdrawn '71 IDecision: The Committeeconsidered the case as per the agenda and noted that the case was already approved in IM.eeti~g No. 09/81 dated 20.10.2020 (held on 27.10.2020) as the case was relisted in the meeting because of! mrgratron the Committee decided to! I J 24lpag~

Ca-;e No.:7i14/Si-ALc2no21

• Party Name: POL YCAB INDIA:Meet No/D~t~: 14m---- IStatus: LIMITED ALC2/2021 Approved :09.02.2021 [RLA File 1:03/95/04010045 I/AM2 II Lic.No/Date:0310839058 :21.10.2020 HQFile 72 :0 I181105010080 IIAM21 I

----~ .. ~'"--,,----

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-470111112/2020-TSW dated 08.12.2020. (copy enclosed) action accordingly . .--

--

---

---

--._- r--

Case No.:289/14/81-ALC2/2018

Party Name: R R KABEL ,Meet No/Date: 14/81- LIMITED ALC2/2021 109.02.2021 I HQ File RLA File

jiic.No/Date:031 08270 10 73 :01/811050101007/AM191 :03/95/040101148/AM191 113.02.2019 ~ ;-Ci-Si-o-n-:-T-he-Co~~-i-tt-e~-c~nsidered the c~s~-as-per-th; age-nd-aand -no-t-ed-thai:- th-e a-pPlicant's r-e'-p-Iy-w'-as-se-nt to Consultant (TEC-3) on 11.02.2021 for examination of the case. However, no comments have been received et. Hence, the Committee decided to wait for the comments. he case stands deferred.

__ ..J IStatus: IDeferred

---

[Case NO.:28/5/81-ALC2/2~-~arty Name: DISHA AUTO I ICOMPONENTS PVT. LTD. ;'-H-Q-F-ile-

-- fRLA File

:01/81/050100077 IAM201 1:03/94/040100121 IAM201 ALC2/2021 09.02.2021 iStatus: IWithdrawn

·-----_-·-----1 Lic.No/Date:0310829099 17.05.2019 ~~-.--- ---

• -.-

Case No.: 12/22/81-ALC212019

IParty Name: SELP INDIA PVT. [Meet No/Date: 14/81- ILTD. ,'ALC212021 '09.02.2021 Status: Withdrawn -----.---- Lic.No/Date:0310834156 15.01.2020 HQFile :0 1/81/0501004021 AM201 IRLA File ::03/95/040100997 IAM201 ,75 [Decision: The Committee considered the case as per the agenda and noted that t~e case was already approved in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted In the meetmg because of migration the Committee decided to 25lpage~

-rc;se N~~:-- [Party Name: JAY BHA WANI !Meet No/Date: 14/81-- -fSt;t~~--- 76INC/2/MEETIJan/202021130 I_METALINDUSTRIES ,ALC2/2021 IDeferred : 109.02.2021 IHQ File: 018105000494AMIO :RLA File :-039404000908AMIO ':L-ic-.N-olD-a-te-: -03-1-0-5-S-76-0-9- ! 129.01.2010 I I _ I 76 Decision: The Committee considered the case as per agenda and noted that due to the launch of new IT Portal, the case was again referred to DPIIT on 11.02.2021 for examination & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the ' on DGFT's iThe case stands deferred. [Party Name~·WINOMECHANic IMeetNolD~;~14-/8T-- I PRIV ATE LIMITED IALC2/2021 , 109.02.2021 ,-~--------------

Case No.:3/S/81-ALC2/2020

@ta~~: .. IDeferred -1-

---

---

---

---

---

---

------1 r:

---

I HQFile :0 I/8110S0/00582/ AM211 j RLA File :04/24/040/00033/ AM21/ Lic.NolDate:041 0 166816 11.06.2020 Decision: The Committee considered information (TEC-3) was sent to the applicant on 13.01.2021. However, no reply has 77 been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within IS days: I. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 2. Bifurcated quantities of components to be accounted for in the resultant product and the 1 requirement of components as spares. Raw Material/Consumables. I I ,--,-

---

iCase No.:311S/81-ALC212020 'IMeet No/Date: 14/81- IStatus: ,ALC2/2021 Deferred I I 109.02.2021 i rHo File

---

• [RiA File----

---

ir::ic.N~/Date:041 0 166846 --I 78!:OI/811050/00610/AM21/ !:04/24/040/00021/AM211 !2S.06.2020 I Decision: The Committee reply was sent to :Ii MSME on 09.02.2021 for examination of the case. However, no comments have been received yet. Hence, the I Committee decided to wait for the comments. I -r-- --- Party Name: ICE STEEL! IpRIV ATE LIMITED [The case stands deferred. f --,';- N~:;-i2/6/81~ALC2/2020 ~ IP'rty Nam,-:P"OLYC~AB~iND~ 1M,,, N~lDa;" 14/81 ~ is'''."' , LIMITED IALC2/2021 ·IIWithdrawn ' 109.02.2021 I I HQ File IRLA-F-i-Ie-------- 1Lic.NolDate:031 08373 13 79 :01l81/050/00649/AM211 :03/9S/040/00232/AM21/ 122.07.2020 i IDecision: The Committee consideredthe case as per the agenda and noted that the case was already approved in! Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of migration the Committee decided to [withdraw the case from the agenda. [The case is withdrawn. 261Page ~

I c." No.,2117181-ALC212020 ENam" AXORA _ 1l'..c,C)vURCESLIMITED I HQ File

[RiA File

Lic.No/D~te:0210210029 :01/81/0S0/00677/AM211 :02/24/0401000S3/AM211 10.08.2020

---

180 Decision: The Committee considered in Meeting No. 10/81 dated 10.1 1.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to IStatus: I WIthdrawn I r IALC2/2021 09.02.2021 r

rCase No.:44/7/81-ALC212020 Party Name: APAR INDUSTRIES LIMITED ALC2/2021 09.02.2021 [Status: 'Withdrawn I HQ File

rRLA File :01/81/0S0100700/AM211 1:03/94/040100316/AM211 81 ~ion: The Committee considered the -case as per the agend~nd noted thatth~ase was already approved lin Meeting No. 10/81 dated 10.1 1.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to ILic.No/Date:0310837821 20.08.2020 pse No.: 18/8/81-ALC212020- f;rty Nam~~ LUMINO NDUSTRIES LIMITED I fH'QFile -[RLA. File

1:01/8I/OSOI007 I9/AM2 11 :02/24/04010006S/AM211

-----'----

---

---

---

82 Decision: The Committee considered the case was again referred to DPIIT & comments. However, comments have not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the on DGFT's iThe case stands deferred. r - Status: Deferred iMeet No/Date: 14/81- ALC2/2021 09.02.2021 Lic.No/Date:021 021 0063 28.08.2020

Case NO.:37/8/81-ALC2/2020

Party Name: SUNRISE EXPORTS INTERNATIONAL ALC2/2021 09.02.2021 [HQ Fil-e -

RLA File Lic.No/Date:0310838223 I 1:01/81/0S0100738/A~_211 1:03/9S1040100339/AM211 _ ~11~09.2020 ' __ 83IO«i'ion, The Committee considered the case as pee agenda and noted that a deficiency letter "eking certain information (SKB) was sent to the applicant on 14.01.2021. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within IS days: Status: Deferred 1. What is weight of Alloy Steel Valve Forged Body of2S0 Nos to be imported? 2. What is total weight of each Forged & Machined Gate Valve assembly with indigenous inputs? 27 I p a g ~J./'J---

What is the weight of 250 Nos Alloy Steel Valve after heat treatment, forging and machining operation? I

---

---

!Meet No/Date: 14/81- IALC2/2021 09.02.2021 i ,caseNo.:23/14/81---

-rparty Name: BAOSTEEL iALC2/2021 'INDIA COMPANY PRIV ATE LIMITED

HQ File RLA File ILic.NolDate:0310838548 :0 1/81/050100767/AM21 I :03194/040100463/AM211 !29.09.2020 184 Decision: The C~mmitt-ee considered the case -as per the ;gend;-;~ noted thaUhe ~ase-~as already approved I in Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of I I I migration of data from 4.7 old Data Base to new DGFT's the Committee decided to I IStatus: ,Withdrawn

Case No.: 1/18/81-ALC2/2019

Party Name: MODISON -Me~tNo/Date-:-14/81-

-rtat~-: ---I METALS LTD. ALC2/2021 Withdrawn 09.02.2021 I rRLAFile

• -1ITc·.No/Date:O:3J0832497-, :03/95/0401007121 AM201 130.10.2019 fHQ File
• .-.- 1:01/811050100295/AM201 85 Decision: The Co~mitte~ considered the case as per the agenda and noted that-the case was already approved in Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of' Imigration of data from 4.7 old Data Base to new DGFT's the Committee decided to I Withdraw the case from the agenda. I ---------_.------------------------------ r-

-r---

Case No.: 18/22/81-ALC212019

Party Name: POLYCABINDIA IMeetNo/Date:14/81- Status: LIMITED IALC2/2021 IWithdrawn ,09.02.2021 I f HQ File

fRLA File -

-rLi-;;-.No/Date:031 0834331 - ,---

:01l81/050100408/AM201 1:03/95/040101018/AM201 120.01.2020 I 86IDeci~ion: The Committee considered the cas-;;s per th-; agenda and noted that the case was already approved in: I [Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to 28 I P a

Meet No/Date: 14/81- ALC2/2021 09.02.2021 Party Name: DIAMOND ENGINEERING (CHENNAI) PVT LTD Status: Withdrawn

Case No.:23/6/81-ALC2/2020

I HQ File

fRLA File ILic.No/Date:041 0 166916 :01/8110501006501 AM211 1:04/24/0401000501 AM21 I 23.07.2020 ; I 87 Decision: The Committee considered the case as per the agenda and noted that the case was already approved in I Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of migration the Committee decided to

iFe NO.'2517181'ALC21202~F" SKYLEAD I IHQ File RLAFile :01l811050100681/AM211 :03/95/040100276/AM211 88 ~--------- I Meet No/Date: 14/81- ALC2/2021 09.02.2021 ~tatus: IWithdrawn --r-- Lic.No/Date:0310837630 13.08.2020 considered in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to --- --- .----'

Case No.:19/8/81-ALC2I2020

rPartyN~e: APL METALS

MeetNo/Date~14/81--- ~:- ILIMITED ALC2/2021 Deferred 09.02.2021 , fHQ-~-

fRLA File ,Lic.No/Date:0210210068 89 1:0I/81 10501007201AM211 ,:02/24/0401000631 AM211 128.08.2020 I ! DeCiSion:The Committ~ co~sidered the case as per the agenda and noted th;t the applicant's reply was ;;;nt to MSME on 01.12.2020 for examination of the case. However, no comments have been received yet. Therefore, he Committee decided to remind MSME for expediting the comments. [Case No.:24/14/81- IALC2J2021 I/party Name: BAOSTEEL [Me~tNo/Date: 14/81- --- Status: INDIA COMPANY PRIVATE 1~"LC2/2021 Withdrawn LIMITED i09.02.2021 ,

RiA File -

---iic.No/Date:0310838549 --r- :03/94/040100464/AM211 129.09.2020 I IHQFile :0 I18110501007681AM21 1

.--

---

90 Decision: The Committee considered in Meeting No. 09/81 dated 20.10.2020 migration the Committee decided to 29lpag~

1 -rcaseNo.:108/14/81-ALC2/2019 r~artyNa~e:ANGELS

-~~etNolDate:14/8-1- --rtat~-- ALUMINIUM CORPORA nON ALC2/2021 Deferred 09.02.2021 -G.No/Date:031083~r-

-- 13.08.2019 -------r-- RLA File :03/94/0401003921 AM201 IHQ Fii;-- 91 :0 1/81/0501002061 AM201 reply was sentto I Consultant (TEC-3) on 09.02.2021 for examination of the case. However, no comments have been received I yet. Hence, the Committee decided to wait for the comments.

Case No.:9/19/81-ALC2/2019

Party Name: NEO POWER Meet No/Date: 14/81- ELECTRONICS & PROJECTS IALC2/2021 PVT. LTD. 09.02.2021 HQ File IRLA File

IILic.NO/D-a-te-;-0-3-10-8-3-3-3-5-7-- I 1:01/811050100348/AM201 :03/9510401008881 AM201 11.12.2019 I 92 Decision: The Committee considered the case as per the agenda and noted that the case was already approved in Meeting No. 10/81 dated 10.1 1.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to 'Status: !Withdrawn ,Icase NO.:2/3J8 I=-ALC212020 I IHQFile I ;01l81/050100501lAM211 93 IStatus: Withdrawn

• ["P;;rtyNa;;e:- SELP INDIA PVT~IMeet NoiDat;; 14/81- ILTD. ALC2/2021 I 09.02.2021 RLA File ILic.No/Date:0310835853 :03/95/040100019/AM211 125.04.2020

considered the case as per the agenda and noted that the case was already approved in Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of I migration the Committee decided to I

---

J --~tus: : ,Withdrawn I

Case No.:S/7/81-ALC2/2020

Party Name: GUJARAT iCOPPER ALLOYS LTD. Meet No/Date: 14/81- I ALC2/2021 09.02.2021 HQ File 1:01/8110501006611AM211

Lic.No/Date:0310837489 '29.07.2020 'RLA File ,:03/94/0401002821 AM211 -- - _.

---

Decision: The Committee considered i in.Me~ting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because ofl ImlgratlOn of data from 4.7 old Data Base to new DGFT's the Committee decided to 30lPage~

r--r-------------

-------,-

Party Name: POL YCAB INDIA 'Meet No/Date: 14/81- iStatus:
LIMITED IALC2/2021 'Withdrawn 109.02.2021 I .--.--~-----------.-.-- -_. -.-- ..--~-.----;-----. HQ File RLA File ILic.No/Date:0310837632 : :01/81/050100682/AM211 :03/95/040100270/AM211 13.08.2020 ,-- ..•. _

_ I 95 Decision: The Committee considered the case as per the agenda and noted that the case was already approved in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of migration the Committee decided to:

Case No.:2617!81-ALC2/2020

~.....:... ._. __

00 _ ··,party Na~;- SUYASH GLOBAL Mect N~lDate: 14/81- PRIVATE LIMITED ALC2/2021 09.02.2021 Status: Deferred

Case No.:20/8/81-ALC2/2020

I"

---

---

,-

!Lic.No/Date:0310838008 i31.08.2020 ----------- HQFile :01l81105010072l/AM211 RLA File :03/95/0401003341 AM211 r-------------~--------- Decision: The Committee considered information as raised by DPIIT was sent to the applicant on 14.01.2021. However, no reply has been received i yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within! 15 days: I. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be 96 furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to ~ be used in the resultant product and sought to be imported/procured from sources other than the! license, if any, may also be indicated. 1 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

---

.1 ~Name: R T JAiNAND-~MeetNo/Date:14/81- ICOMPANY ALC2/2021 09.02.2021 'Status: Deferred I Case No.:3118/81-ALC2/2020 I I 1 roo J HQ File IRLA File Lic.No/Date:0310838097 :0 l/81/050100732/AM211 :03/95/040100347/AM2l/ 104.09.2020 : D~cision: -ih;Committee considered th~ ca~-;;- per ag~~d-~-~;:;ct;ot~dthat ~ deficiency letter -se-e-k-in-g-certainI 97 information as raised by MSME was sent to the applicant on 14.01.2021. However, no reply has been received I yet. Therefore, the Committee decided to remind the applicant for furnishing the following information within 15 days: I 1. To provide average copper content in import and export. ~_k~: cas~st~n~_deferred. _ 31lpag~

rCa~e-No.:25/14/81-

IALC2/2021 HQ File :01/8110501007691AM211

f

--

'Meet No/Date: 14/81- ,ALC2/2021 j09.02.2021 r ILic.No/Date:021 021 0 132 129.09.2020 IParty Name: APL METALS ILIMITED ------~ ._------ I RLA File :02/24/0401000821 AM21 1 Status: Withdrawn 98 Deci~io--Th~Co~itt; -conside-r~'d the ~;;s;;s ~~ th~-~gd~'d noted that th~-Z~~;~-~Iady -;-pproved I in Meeting No. 09/81 dated 20.10.2020 as the case was relisted in the meeting because of i migration the Committee decided to I [withdraw the case from the agenda. I IThe case is withdrawn. I J I [Case N:21/i4/81--AiC2/i02i ~RL' ~AZ;F~ialeIC~Np[%~S

--
--
II
i
109.02.2021
IHQ File
-
--
---
-'
-
----
..--':L-ic-.N-. o-I-D-at-e-:0-3-10-8-3-92-0-9
1:01/811050100815/AM211
!:03/95/040100467/AM21/
)29.10.2020
I
-
-
--.----
-- .. -
----
-------
--I
99 Decision:
The Committee
considered
1
the case was again referred to DPIIT on 11.02.2021 for examination
& comments.
However,
comments have I
not been received yet. Hence, the Committee decided to wait for the comments and also, decided to ask from the
on DGFT's New IT Portal to examine the case, if the applicant
1-lc~~;-N~.-:36/l4i81~ALC2/2019-
~~~~~~~e;JI1~:METAL-
- -~~~27206~tte:
14/81----I~~~:~~e~---
I
I
1;~.02.2021
I
I
IHQ File
-------IRLA
File
-
-'Lic.No/Date:0410165741
!
II00 ,:~~81!050/00134/
AM20/.
1:04/24/040/00013/ AM20/
120.06.2019
IDecision: The Committee
reply was sent to
I
MSME
on 01.12.2020
for examination of the case. However, no comments have been received yet. Therefore,
the Committee decided to remind MSME for expediting the comments.
-
-
- ..---
--r::------
iParty Name: SELP INDIA PVT.
(Status:
,
I
'LTD,
IALC2/2021
/Withdrawn
:,'
09.02.2021
.--------------r-------------,-------------
HQ File
RLA File
Lic.No/Date:0310835959
:01/81/050/00502/ AM21/
:03/95/040/00032/ AM211
26.04.2020
101 in-- -.-----._----
..---
.. -.--_...-
-
------- ..-----------------
..-.---"--"'--
---- ....-.----
IDecision: The Committee
considered the case as per the agenda and noted that the case was already approved I
in Meeting No. 09/81 dated 20.10.2020
migration
the Committee
decided to
'withdraw the case from the agenda.
;The case is withdrawn.
## Case No.:3/3/81-ALC212020
32 I P age

--,.--- -
Party Name: WINOMECHANIC
PRlV ATE LIMITED
Status:
Withdrawn
## Case No.:8/7 /81-ALC2/2020
ALC2/2021
109.02.2021
!
Lic.NolDate:0410166928
30.07.2020
-------------
---------------
r
--
-
HQFile
102 :01/8110S0/00664/AM21/
[
.
-
RLA File
:04/24/040/000S2/AM21/
Decision:
The Committee
considered
the case as per the agenda and noted that the case was approved
in
Meeting No. 13/81 dated 30.12.2020
(held on 08.01.2021)
migration
the Committee
decided to
IIC'"
No.,32/SI8I-ALC2/2020
Feet
No/Date: 14/81---
Status:
iALC2/2021
Deferred
09.02.2021
Party Name: PARAM
INDUSTRIES
HQ File
:01/8 I/OSO/00733/AM2 1/
RLA File
!:03/9S/040/00344/AM211
Lic.No/Date:0310838100
04.09.2020-
---- ------
Decision:
The Committee
considered
[information as raised by MSME
was sent to the applicant on 14.01.2021. However, no reply has been received
yet. Therefore, the Committee
decided to remind the applicant for furnishing the following
information within
IS days:
il.
103 2.
Detail technical drawings with dimension of each export product, Catalogue,
if any, may also be furnished.
Weight of each Export Product.
Weight of each of the imported
and indigenous
input, separately
for each product,
for the purpose
of
material balancing.
Net weight (Gross weight minus wastage) for each imported and indigenous
input in I
the export product may be indicated. Net weight along with details of other imported input to be used in I
the resultant product and sought to be imported/procured
from sources other than the license, if any, may
also be indicated.
Starting from the specification
of the export product, basic calculation as to how of raw material proposed
for import has been arrived at, including the net weight of components
to be manufactured
out of these
imported
materials,
wastages
claimed
at each stage of manufacturing
with complete
justification
and'
supported by documentary
evidence/drawings
etc.
3.
I
4.
,
.The case stands deferred.
## Case No.:7/14/81-ALC212021
Party Name: POLYCAB INDIA
Status:
,LIMITED
ALC2/2021
Withdrawn
I
09.02.2021
HQ File
rRLA File
-
-
--
G.No/D~te:031083~
-,
104 :01l8~/O~0~~07_~?lAM21~
__ :_03/~S/040/00396/AM21/
~08~10.2~20
l
_
I
IDecision: The Committee
considered
'in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
Imigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to I
331Page
~

iCase NO.:13/14/81-ALC212021
r
--
..
Party Name: HI TECH
Istatus:
'1STAINLESS WORLD
IALC2/2021
Deferred
09.02.2021
'RiA
File
----'L-ic-.N-o/-D-a-te-:-03-1-0-8-3-90-9-6-
:03/94/0401005 19/AM211
23.10.2020
Ir::-:::-:::: -
--------
iHQFile
:01/81/0S0100807/AM211
105 Decision:
The Committee
considered
I
'the case was again referred to MSME
& comments.
However,
comments have
not been received yet. Hence, the Committee
decided to wait for the comments
and also, decided to ask from
\
the applicant
to upload
all the relevant
documents
on DGFT's
New IT Portal to examine
the case, if the
applicant has not uploaded documents yet.
I
The case stands de_f~_n:.~d:_.
_
_
_
__
__
_
_
__
__ _ J
IParty Name: APAR
INDUSTRlES
LIMITED
'Case No.:22/14/81-
ALC212021
I
RLA File
:03/94/040/005101 AM211
ALC2/2021
09.02.2021
-
Lic.No/Date:03108392l4j
129.10.2020
Status:
Approved
HQ File
::0 1/811050/00816/ AM2 II
-
-
-----
I
Decision:
The Committee
considered
the case as per agenda and decided
to fix the ad-hoc norms as per I
written comments given by Consultant
(TEC-3)
via email dated 11.02.2021 as under:
!
,
,
106 I
SI.
lTCHS
Import
Item
Recommended
Quantity
No.
Code
I
74081190
Copper Wire Rod: 8 Mm Dia
Net + I% wastage
2
72172010
G.!. Wire
Net + I% wastage
II 3
76011010
Aluminium
Ingots/Sow/T -Bars
Net + I% wastage
I 4
76041010
Aluminium
Wire Rod
Net + 1% wastage
5
39011090
XLPE Compound
Net + 2.5% wastage
6
39041020
PYC Resin
Net + 1% wastage
7
29173200
Plasticiser (DOP)
Net + I% wastage
Note: Import
items shall be of relevant
grade as contained
in the export
item.
action accordingly.
___________________
J
r-
-
---
r""
No.,312181-ALC212018
!HQ-File
:0 1/8I/050/00008/ AM 19/
,
P'rty N-;m" ANGELS
- 1M'" No/D"" 14/81-
ALUMINIUM
CORPORATION
ALC2/2021
09.02.2021
~
-
atus:
ferred
1---
RLA File
:03/94/040/00933/ AM 18/
'Lic.No/Date:0310819231
119.02.2018
-
---
Decision:
The Committee
considered
o
information
(TEC-3)
was sent to the applicant on 30.09.2020
followed by a reminder
II 7 'on 02.12.2020.
However,
no reply has been received
yet. Therefore,
the Committee
decided
to send final
reminder
to the applicant for furnishing the following information within IS days:
1.
To submit revise application
and give complete details of export & import and indigenous
inputs along
with economic viability.
2.
Process of manufacturing
with stage-wise wastage.
34lpage~

I
Meet No/Date: 14/SI-
ALC2/2021
09.02.2021
IHQ File
rRLA FiT;
~ic.No/Date:031OS29921- I ---
IOSI:01lS1/050100144/AM201
_:03/94/0401002Y7/AM201
26.06.2019
reply was sent to
Consultant
(SKB) on 11.02.2021 for examination
of the case. However, no comments have been received yet.
Hence, the Committee
decided to wait for the comments.
l
C-;se No.:46/14/81-ALC2/2019
Status:
Deferred
IThe case stands deferred.
-----------
## Case No.:32/4/81-ALC2/2020
Party Name: SIECHEM
'TECHNOLOGIES
PRIV ATE
ILIMITED
-1-
-
RLA File
:04/24/0401000291 AM21 I
IHQFile
--
I:Ol/S1/050100557/AM211
Party Name: A-I FENCE
PRODUCTS
CO. PVT. LTD.
'Meet No/D~te: 14/81-
ALC2/2021
09.02.2021
I~
No.:11l20/81-ALC212019fpartY
Nam~: RAJ METAL
:
IINDUSTRIES
Status:
Deferred
HQ File
RLA File
Lic.No/Date:0210209635
109 ~I/SI/~0100~~/AM201
1:02/24/040100143/AM201
20.12.2019
_
IDecision: The Committee
reply was sent to I
MSME on 12.01.2021 for examination
of the case. However, no comments have been received yet. Therefore,
the Committee decided to remind MSME for expediting the comments.
I
Meet No/Date: 14/SI-
ALC2/2021
109.02.2021
Status:
Withdrawn
Lic.NolDate:0410166790
129.05.2020
I
110 Decision:
The Committee
considered
in Meeting No. 10/S1 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
migration
the Committee
decided to I
,The case is withdrawn.
r
----
--
-
Party Name: KARAMT AM
ENGINEERING
PVT. LTD.
-[Meet NOlDate: I4ISI-
ALC2/2021
09.02.2021
Lic.No/Date:0310S36703
17.06.2020
'status:
IDeferred
lie". No.' 1415181-ALC2/2020
I
HQFile
:0 IIS I10501005931AM21 I
IRLA File
1:03/94/0401001651 AM21 I
IIII
Decision:
The Committee
considered
the case was again referred to MSME
& comments.
However, comments have
[not been received yet. Hence, the Committee
decided to wait for the comments
and also, decided to ask from
[the applicant
to upload
all the relevant
documents
on DGFT's
New IT Portal to examine
the case, if the
[applicant has not uploaded documents yet.
351Page
~

ICase No.: 91718I-ALC212020
Party Name: WINOMECHANIC
[Meet NolDate: 14/81-
J1PRIVATE LIMITED
IALC2/202 I
09.02.2021
IHQ File
·-----fRLA
Fil-e--------'L-ic-.N-o/-D-a-te-:0-4-1-0-16-6-9-2-9-
i:O 1I811050100665/AM211
!:04/24/040100053/AM211
30.07.2020
112 fllicision:Th~C;m;itt;-
consick~dthe
~;s~ as pe;- ~g~nda-;;d -;~t~d-th;t
adeficiency
I~tt~~'-~-~ek~g-c~rtain'l
linformation
(TEC-3)
has been sent to the applicant
on 12.02.2021.
Therefore,
the
!Committee decided to wait for reply of the applicant.
Status:
Deferred
.The case stands deferred.
-'-~-~~t
No/Date:14/81-
--------[Statu-s~-----I
ALC2/2021
[Withdrawn
t.
09.02.2021
HQ File
RLA File
[Lic.No/Date:0310837707
-
r - ----.
I
:Oy8~~05_?1006901 AM21 I
1:.?3/94/040/~02361 AM211
I~.08.2~~_~
.. ___
-----------.1
113 Decision:
The Committee
considered the case as per the agenda and noted that the case was already approved I,
in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of I
migration
the Committee
decided to i
r
- -
_. ------.---.--- ..---~- ---
-------
## Case NO.:34/7/81-ALC2/2020
Party Name: APAR
INDUSTRIES
LIMITED
Status:
Withdrawn
Party Name: SEIKODENKI
INDIA PRIVATE LIMITED
Meet No/Date:
14/81-
ALC2/2021
09.02.2021
[Case No.:1/3/81-ALC212019
I
---
-1-
RLA File
Lic.No/Date:0410165474
:04/24/0401000031
AM201
15.04.2019
IHQFile
!:O 11811050100021 IAM201
~
-
-
-",---~, ---,--
._._- _._- .--_.,._--_.
".- ..--~--,
..--.--.-
-~
...-
114 Decision:
The Committee
considered
,in Meeting No. 09/81 dated 20.10.2020
-rnigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to
I'
jWithdraw the case from the agenda.
JThe case is withdrawn.
!
-"
-, - -
-..
--
r- Case No.:160/14/81-
IParty Name: KRYFS POWER
Meet NolDate:14/81-
~us:
I
ALC2/2019
ICOMPONENTS
LIMITED
ALC2/2021
hdrawn
I
09.02.2021
I
HQ File
RLA File
--f,Lic.NoIDate:031o831798
r-
:01l81/050100258/AM201
i:03/94/040100475/AM201
125.09.2019
I
115lDeCision:
The Committee
considered
the case as per the agenda and noted that the c-as-e-w-a-s-r-eJ-'e-ct-e-d-i-n
I
M.eetin.g No. 09/81
dated 20.10.2020
as the case was relisted in the meeting because ofl
migration
the Committee
decided to
i
-- -- -""":7'---_------
__---..J
I
36lpage~

-
--
-
-
-
- r -
-
-
--r;:--
Party Name: JAY BHAWANI
Meet No/Date:
14/81-
[Status:
I
METAL INDUSTRlES
IALC2/2021
IDeferred
09.02.2021
## Case No.: 13/20/81-ALC212019
'HQFile
--
-
:01/81/050100365/AM201
r
-
RLA File
:03194/0401007651
AM201
Lic.No/Date:0310833602
23.12.2019
116 IDecision: The Committee
considered
the case as per agenda and noted that due ~ the launch
of new IT Portal i
the case was again referred to DPIIT on 11.02.2021 for examination & comments.
However,
comments have!
'not been received yet. Hence, the Committee
decided to wait for the comments
and also, decided to ask from
I
lthe applicant
to upload
all the relevant
documents
on DGFT's
New IT Portal to examine
the case, if the
'applicant has not uploaded documents yet.
I
I
## Case No.:2S123/81-ALC2120i9--
fp;rty Name: TATA
IINTERNA TIONAL LIMITED
I'H-Q-FI-·le---------
RLA File
1:01l811050100437/AM201
:02/24/0401001
87/AM201
117
-----'---
-
--
Decision:
The Committee
considered
(SKU) was sent to the applicant on 04.11.2020
followed by reminders on
19.1 1.2020 & 13.01.2021. However, no reply has been received yet. Therefore, the Comm ittee decided to reject
the case under intimation to RA, KoIkata.
Meet No/Date:
14/81-
ALC2/2021
09.02.2021
-r;:---
Status:
IRejected
rLiZNo/Date:021
0209776 - r
119.02.2020
-- -- ------
IRA concerned may take suitable consequential
action accordingly.
--------------------------
i
## Case No.:34/4/81-ALC2/2020
Party Name: LEADSTONE
Meet No/Date:
14/81-
.Status:
ENERGY LIMITED
ALC2/2021
Withdrawn
09.02.2021
HQ File
RLA File
Lic.No/Date:0210209891
I
,:0118110501005591 AM211
:02/24/0401000141
AM211
101.06.2020
1
,
118lDecision:
The Committee
considered
the case as per the agenda and noted that the case was already approved I
in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
Imigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to
Ie.,. No.,47/5181 -ALc212020
HQFile
:0 1/81/050100626/AM2
II
-
'Meet No/Date:
14/81-
jALC2/2021
09.02.2021
rStatus:
IDeferred
Party Name: A-I FENCE
PRODUCTS
COMPANY
PRlVATE LIMITED
I
---
-
---'-r
-
-
--,-
A File
Lic.No/Date:0310837058
94/040100
197/AM211
07.07.2020
119 IDeci;io~: The Committee
con~idered the case as p~r agenda and noted that due to the la~nch o~e;
IT Portal
Ithe case was again referred to Consultant
(TEC-3)
& comments,
However,
I
'comments
have not been received
yet. Hence, the Committee
decided
to wait for the comments
and also,
decided to ask from the applicant to upload all the relevant documents
on DGFT's
New IT Portal to examine
the case, if the applicant has not uploaded documents yet.
371pa~

rc,,, No., tonI81-ALC212020· %~i~:~e~~;:'::~LE
.-
~~~2~2~~ ••te 14/81-·
~~:~;~.wn
:
\pOWER PRJV ATE LIMITED
09.02.2021
I
IHQ File
:RLA File
--[LI·-c-.N-o-/D-at-e-:0-4-10-1-6-6-93-0-r
:0 1/81/050100666/AM2II
:04/24/040100058/AM211
130.07.2020
I
-
-
-
- ---
-
--
-
-
I
120 Decision:
The Committee
considered
the case as per the agenda and noted that the case was already approved I
in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
Imigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to:
jWithdraw the case from the agenda.
## Case No.:39/7/81-ALC2/2020
Party Name: POLYCAB INDIA
Status:
I
,LIMITED
IALC2/2021
Withdrawn
I
I
09.02.2021
IHQ File
--IRLA
File
--
--I'lTc.No/Date:0310837758
r----'I
:01181/0501006951 AM21 I
:03/9510401002891AM211
119.08.2020
I
------
1121 Decision:
The Committee
considered
the case as per the agenda and noted that the case was already approved'
[in Meeting No. 10/81 dated 10.11.2020 (held on 17.1 1.2020) as the case was relisted in the meeting because of I
migration
the Committee
decided to I
'
,
ICase No.: 18/14/81-ALC2/2021
,Party Na~e:
STERLITE
IPOWER TRANSMISSION
LIMITED
--fRLA
File
-
--
!:03/95/040100333/AM211
'Meet No/Date: 14/8~--
Status:--
:ALC2/2021
Withdrawn
109.02.2021
--U::;;;-.No/Date:0310838436
124~09.2020
r
--
-
HQFile
FO 118110501007621AM211
122 IDecisio~: The Committee
considered
lin Meeting No. 09/81 dated 20.10.2020
migration
the Committee
decided to I
:withdraw the case from the agenda.
I
:Party Name: VEST AS WIND-
'Meet No/Date: 14/81-
ITECHNOLOGY
INDIA
!ALC2/2021
:PRIV ATE LIMITED
09.02.2021
r
-~
-
-
-
RLA File
Lic.No/Date:0410165523
1:04/24/040100017/AM201
30.04.2019
IStatus:
!Withdrawn
I
## Case No.:21/3/81-ALC2/2019
I
HQ File
:0118110501000411AM201
123 Decision:
The Committee
considered
the case as per the agenda and noted that the case was already approved'
in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
migration
the Committee
decided to
.The case is withdrawn.
381pager

r----------------------~------------
'Case No.:S/1S/SI-ALC2/2019
'Party Name: PARAM
I
IINDUSTRIES
ALC2/2021
09.02.2021
------
-----r
---
IStatus:
jWithdrawn
rwn --
--------r-
-
I,~_:<,File
'RLA File
:01/8110S0100274/AM201
:03/9S10401006931AM201
r
-
-
,Lic.No/Date:0310832140
10.10.2019
1
124 IDecision;-Th;C~ittee
considered
the case as per th~ agenda and noted that the case ~a~ ~ready
approved i
!in Meeting No. 09/81 dated 20.10.2020
,
migration
the Committee
decided to
'withdraw the case from the agenda.
IThe case is withdrawn. -----
I
## Case No.:22/20/Sl-ALC2/2019
!Party Name: UPR-
---
-IMect No/Date: 14/81-
I
ENGINEERING
PRIV ATE
\ALC2/2021
.
LIMITED
09.02.2021
fHQ File
-
--
fRLA File -
iic.NolDate:0310833737
1:01I81/0S01003741AM201
:03/9S10401009461AM201
'27 .12.2019
[Status:
,Approved
Decision:
The Committee
considered
the case as per agenda and decided to ratify the ad-hoc norms on as per
comments of Consultant
(TEC-3)
considering the applicant's
reply dated 13.01.2021 as under:
'12
'sI
IIITCHS
lTCHS
Recommended
Export
Item
Quantity
Code
Import
Item
Quantity
I Code
Stainless Steel Parts Of Aircraft
2900Kg
I
Structure HS (lTC)Code
Stainless
inclusive of
I
73182200
73182200,84091000&
1000 Kg
72222099
Steel Bars
190% wastage
73261990) (Net Content:
I)
(Grade S80d
after taking 5%
I
Stainless Steel Bars (Grade S80d
& S130D)
recovery
II
& S 130d) :1,000.000 Kilogram)
INote:
I
1.
2.
Export
item will be as per list given by the applicant
vide email dated 21.09.2020.
(Copy enclosed)
Grade
of import
item will be same as used in export
item.
IRA concerned may take suitable consequential
action accordingly.
I'Case
NO.:4/24/SI-ALC212019-,party
Name~ TAN1RA DHATU
- Me~t No/Date: 14/81-
I
UDYOG PRIVATE LIMITED
!ALC212021
i
,
09.02.2021
jHQ File
IRLA File
--
ILic.No/D~te:021 0209779
1:01l81/0S01004411AM201
:02/24/040100189/AM201
120.02.2020
126 Decision: The Committee
considered
the ca~e a; p;r theagenda and ~ted
that th~ case ;as
alreadyappro;ed
:
'in Meeting No. 09/81 dated 20.10.2020
migration
the Committee
decided to
~
I
Status:
Withdrawn
I
IThe case is withdrawn.
I
_-1
39lpage~

iMeet NolDate:
14/81-
'ALC2/2021
09.02.2021
Status:
Withdrawn
## Case No.:43/4/81-ALC2/2020
\party Name: DISHA AUTO
COMPONENTS
PVT. LTD.
HQ File
IRLA File
iLic.NoIDate:0310836464
I
I
;01!81/050100568/AM211
:03/94/040100096/AM211_
J.?_1.06.2020 __
._
_
--I
127 Decision: The Committee
considered
I
in Meeting No. 10/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
.migration
the Committee
decided to I
Iwithdraw the case from the agenda.
Party Name: SIECHEM
-~Meet
No/Date: 14/81-
I~tatus:
TECHNOLOGIES
PRIVATE
ALC2/2021
Deferred
LIMITED
09.02.2021
----'RiA
File
-
Lic~NoIDate:041 0 I66843-r--
:04124/040100039/AM211
25.06.2020
## Case No.:29/S/81-ALC2/2020
I
HQ File
:0 I18110501006081 AM21 I
Decision:
The Committee
considered
'information
(TEC-3)
was sent to the applicant on 13.01.2021. However, no reply has I
been received
yet. Therefore,
the Committee
decided
to remind the applicant
for furnishing
the following i
128 information within 15 days:
I
I.
Cross Sectional Diagram of export product with calculation of raw material requirement
and the weight of
the Cable in Kg. per Km. Copy of relevant National/International
Standardlbuyer's
data sheet may also be
furnished.
2.
Generic name & catalogue of item of import at Sl. No.2 to 8.
3.
Justification
for import of many types of insulating materials.
[The case stands deferred.
-----------------------------------------------------------------------------~
## Case No.:12/6/81-ALC2/2020
Party Name: PONDY OXIDES
'Status:
AND CHEMICALS
LIMITED
ALC2/2021
IWithdrawn
109.02.2021
HQ File
'RLA~
~-
Lic.NoIDat-e:-0-4-IO-I-66900
- ~
--I
:01!811050100639/AM211
!:04/24/040100043/AM211
17.07.2020
1
129 De~ision: The Committee
conside~edthe
case as per the agenda and~ted
that the case was already approvedl
in Meeting No. 12/81 dated 15.12.2020 (held on 22.12.2020)
1
Imigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to!
~
40 I P age

ICase No.,4117181·ALC212020
IP'rty N,m" SKYLEAD-
I
IHQ File
IRLA File
1:01181I050100697/AM2
II
1:03/95/040100297/AM211
rStatus:
IWithdrawn
,
Meet No/Date:
14/81-
ALC2/2021
09.02.2021
-
Lic.No/Date:0310837792
19.08.2020
130
-
-------
Decision:
The Committee
considered
in Meeting No.1 0/81 dated 10.11.2020 (held on 17.11.2020) as the case was relisted in the meeting because of
migration
the Committee
decided to!
## Case No.:24/8/81-ALC212020
HQFile
131 :01l81/0501007~~A~2~
Meet No/Date:
14/81-
I
ALC2/2021
09.02.2021
r-RL-A-F-ile---------JLic.No/Date:0310838010
:03/95/040/003241 AM211
01.09.2020
Party Name: RAYCHEM RPG
PYT. LTD.
Status:
Deferred
reply was sent to
DPIIT
on 08.02.2021
for examination
of the case. However, no comments have been received yet. Hence, the
Committee decided to wait for the comments.
iThe case stands deferred.
-ICase
No.: 19/14/81=ALC212021
-rParty
Name: STERLITEMeet
NolDate: 14/81-
IPOWER TRANSMISSION
ALC2/2021
pMITED
09.02.2021
HQ File
-
--
-
-rRLA
File-
-
-
-ILic.No/Da~0310838437
r-----I
::01/81/050100763/AM211
r03/95/040100302/AM211
;24.09.2020
132 fDecision: 'T-he Co~ittee
c~nsi&redthe
cas-~'as per the agenda and noted that the case was already approved
in Meeting No. 09/81 dated 20.10.2020
Imigration of data from 4.7 old Data Base to new DGFT's
the Committee
decided to
[Status:
jWithdrawn
.withdraw the case from the agenda.
'The case is withdrawn.
-r
-
-
## Case No.:17/14/81-ALC2/2021
'Party Name: MAYFAIR
Meet No/Date:
14/81-
IINTERNA TIONAL
ALC2/2021
I
109.02.2021
IHQ File--------
RLA File ---
-
--
-fLic.No/Date:0310839150-
:01l811050100811/AM211
:03/95/040100468/AM211
127.10.2020 •
Status:
Deferred
133 Decision:
The Committee
considered
the case was again referred
to Consultant
(TEC-3)
on I 1.02.2021 for examination
& comments.
However, I
comments
have not been received
yet. Hence, the Committee
decided
to wait for the comments
and also,
decided to ask from the applicant to upload all the relevant documents
on DGFT's
New IT Portal to examine
the case, if the applicant has not uploaded documents yet.
.
.
--.1
---
-- ----
- ---------
411pagF

r-r-r-r-r-
[------------------------
-----------------------------
--------------
--- ----
-----
---------------------------------
~-------------
---
ICase No.:26/14/81-ALC212021
Party Name: METAL CARE
Status:
I
ALLOYS PRIV ATE LIMITED
ALC2/2021
Deferred
09_02.2021
IRLA Fi~------ILi~.NolDate:0310839247
~
::03/95/0401004651 AM2 II
02.11.2020
I
HQFile
!:01/81/050100820/AM211
~134 [Decision: The Committee
considered the case as per agenda and noted that due t~ the-I~-;:;-~ch-~fne~iT
P~rtal
I
'the case was again referred
to Consultant
(SKB) on 11.02.2021
for examination
& comments.
However,
comments
have not been received
yet. Hence, the Committee
decided
to wait for the comments
and also.]
I
'Idecided to ask from the applicant to upload all the relevant documents
on DGFT's
New IT Portal to examine I
the case, if the applicant has not uploaded documents yet.
I
!
'
*********
42 I P age

Email
~~----------------------------------------------------------------
httpS:llemail.gOv.in!hlprintmeSSage?id~ASia/KOlkata&.
"
DGFT Norm~ttee
2
Email
Re: Reminder to expedite the comments recommendations for NC-2 meeting No.
14/81- ALC2/2020
- reg.
From: Saurabh Ranjan <ftp-iphw@meity.gov.in>
## Subject: Re: Reminderto expedite the comments
recommendationsfor NC-2 meeting No. 14/81-
ALC2/2020- reg.
To: DGFTNorms Committee 2 <nc2.dgft@nic.in>
Cc :Shobhit Gupta Dy. DGFT<shobhit.gupta@gov.in>,
Asha Nangia <anangia@meity.gov.in>, Sushil Kumar
Jangid <sushil.jangid@meity.gov.in>
Wed, Feb 03, 2021 05:26 PM
01 attachment
W-21/7/2021-IPHW
Government of India
Ministry of Electronics and Information
Technology
IPHW Division
Date: 03.02.2021
## Subject: Ratification of norms in terms of Para 4.7 of HBP. (Vol.1) in respect of
Advance Authorization No. 0710116993
issued to MIs. FCI OEN Connectors Ltd.
This refers to DGFT email dated 24.09.2020
seekina
comments
of this
Ministry
on the
above-mentioned
application
of
Mis.
FCI
DEN
Connectors
Ltd. for export of different
"Cable Assembly".
2.
The application
has been examined
in the
Ministry
of Electronics
and
Information
Technology
from technical
angle. The import
products
are required
for manufacturing
the export
product.
The Ministry
recommends
Ratification
of
norms of advance authorization
as per Calculation
Sheet attached.
Please find attached.
Regards,
Ashutosh
Chauhan
Asstt. Manager
MeitY
(Sd\- )
(Sushil Kumar Jangid)
Scientist '8'
Tel: 011-24301784
ftp-iphw@meity.gov.in
From: "DGFT Norms Committee
2" <nc2.dgft@nic.in>
To: "Saurabh
Ranjan"
<ftp-iphw@meity.gov.in>
Cc: "Shobhit
Gupta Dy. DGFT" <shobhit.gupta@gov.in>
lof3
2/8/2021,4:01
PM

~8737 / W21/IPHW
W-21/7/2021-IPHW
FO OlN
CONHECTCM\5 UMrT£D,IlANGAlQfl(-16
,.r
AOVANCl
AUTHOIUZA11OH
No.o11011699]
DAUO
11.0!iI.mo
tALCUlAnON
SH££l
"" ..
Ixpoo1rt.m
•• OetcriptIooI ,- '-
"'"'-"'
'..•.••...
94()-OOl4(lf
• CA8UASSEM81V
CAII.'
CAOU·
l-C8l-,JC-lIAWG-.lIlAWG1C.UU4641k
CA8U
CA8Lf
-1C81.-UUOO7-14-11C
Ull·UllOO7·14AWG·1I(
CA8U
c.uu: . l-C81-6C-laAWG·8G
UU464
6C UIAWG
CAOU
CAllE·
lC1l-Ull(D7-14-111
Cll-UUOO7·)4AWG-IK
940-0144A1.1-CAIUASS(M'lY
SOLOU.MATUIA
SOlf)£IIIMATEml-
lSOlDHSTKU
Sn9U
uO.7
STICK LI
SOLDO; MAU-,"
SOlI)(II
MATUIAL
.IC5I.GAOSTF1M14MTt.ll.lMM
D4AfCOSOl.OU
WIlliE
"
CA8U
C.A11U-l~lCfolllCOl'.folUl20176
"
CAll'
CAtLl-
lC1l·UUOO1·14-11(
CIl·UltOO7·14A'NG-H
MO-0199A·CAlLf.t.SS£MltY
tOllllOll
SOLDU.MATfIlJA
s.ou>£l1
MAlU.IAL
·ISOlDEkSTlCtF
5"99.1
uO.7STlCKlf
SOI.O(IIIMATtllllAl
SOU>t:lllMAT£p.w.·
K5tGAOSTUM14MTl.l
UMMDv.lCOSOlDU
W1kl
11
CAOU
CA8U
. l·C8l·lC-lIAWG·11C
llAWG
sc UU464
IIC
"
CAOU
CAall-
lC8l·UUlXI1·1
••• 1CcaL-ULlOO7'14A'NG-tI(
!to*C).061SAlf·CAIIlASS(MllV
11
SOlOEIlMATt
SOU)(ItMA.T£!lJAt
-lS0U>USnUJ
Sfl9U
uO.7 STICk U
SOlDEII: MATEWJ
sotO(lt
MATUlAl-
XSlGAOSTflM14VT1.l
UMM
DIA [(OSOlO(llt
WIllE
OWU711W·
CAllI
ASSE.MilV
tSO
CAOU
CAll(
·llUfkClIU4CU1P
llAWG
.11P
"
IIWO
MAIO
·1JooaAAlo.1OMM
100
IMI().1OMM
OWllOO7AU·
CAIlt
ASS(uatv
t5al
"
CA8ll
CA8l(
·llU'~Clu).4C't.l1P
llAWG
.17
CAaU
CA8l[·CM.1S!U101110ffIC1OC11A'NG1.17MMIUC
, ••. wonqcy -
-
W_
M
UISl94
M
0.049010
M
M
0.049OlO
l.•••
M
1.915294
M
0.049010
KG
0.000196
l."'"
M
1.915194
]02500.00
M
0.(490)0
t._
seceee
KG
]0.00
KG
0.4)00049
l._
s.'"
M
UUU3
l."'"
.....
l._
..."
l."'"
U9]1~1
1500.00
«sooo. '"
10000.00
50.'"
101500.00
SOOO.'"
20.00
1411.32
O.OS•
397157,S
O.OS.
0.05.
51.15
O.OS%
1916l1.61
0.05"
41104.41
0.05%
19.62
..•.
O.OS.
191611.61
0.05"
4104.41
0.05"
1961
0.05%
..•.
O.OS"
57S19
O.OS"
0.05"
3590.03
......,-
_ •........•.•
."""
1471.31
391251.35
~US
198621.68
.•gOUt
19.62..•.
..,
575.19
3590.QJ

qlfU'l;;;t4 3tn'~
JOi ')f I<'I:Q
3C\..<iIt1I~3t\"{~~~
Government of India
Ministry of commerce & Industry
Department
for Promotion of Industry & Internal Trade
(Technical Support Section)
•••• *****
Subject: - MIs KEllndustries
Private limited,
A.A. No. 0510415079
dated 01.09.2020
Reference: - D.G.F.T. F. No. 01/81/050/00722/AM21
DGFT(DES-2)
may kindly refer to their e-mail dated 1st December
2020 forwarding
firm's reply for fixation of norms in respect of the above-mentioned
A.A. In this connection,
the undersigned is directed to say that the Instant AA may be ratified as under:-
1. Net weightlKM of export items at 51.No.1 and 74 under the Advance Authorization
may be
specified as under:
I
51.No.
Net Weight
SI. No.
Net Weight
SI. No.
Net Weight
Kgs.lKM
Kgs.lKM
Kgs.lKM
1
207.22
26
312.68
51
323.47
2
324.29
27
495.55
52
486.17
3
385.36
28
381.26
53
649.2
4
1101.9
29
829.96
54
752.75
5
351.36
30
1235.32
55
1416.55
6
531.54
31
642.02
56
957.81
7
2202.43
32
1107.93
57
492.76
8
2969.56
33
2717.87
58
735.82
9
15106.89
34
340.02
59
387.78
10
856.23
35
527.51
60
899.54
11
1643.59
36
719.26
61
473.61
12
1738.03
37
1702.99
62
550.33
13
532.02
38
5245.23
63
326.71
14
797.78
39
514.91
64
405.45
15
951.74
40
357.07
65
459.07
16
1346.02
41
714.13
66
629.6
17
486.91
42
350.39
67
683.36
18
909.2
43
326.52
68
938.24
19
1324.92
44
653.04
69
470.62
20
1707.75
45
1986.05
70
896.78
21
528.67
46
3644.6
71
1070.47
22
14664.5
47
358.2
72
1402.68
23
9256.33
48
441.72
73
522.37
24
10265.09
49
294.25
74
1073.74
25
2808.84
50
294.25
2. Quantity of import
item at SI.No.1
Le.Copper
Wire Rodl CC Rod(EC
Grade}
may be

allowed as 1.01Kgs/Kg content in the export items at SI.No.1 to 23 and 25 to 74.
3. Quantity of import item at SI.No.2 Le.XLPE Compound
may be allowed
as 1.0SKgs/Kg
content in the export items at SI.No.1 to 2S, 37, 38, 40 to 42, 4S to 48 and 69 to 74.
4. Quantity of import item at SI.No.3 Le.PVC Resin
may be allowed as 1.0SKgs/Kg content
in the export items at SI.No.1 to 23, 26 to 39, 42 and 45 to 74.
5. Quantity of import item at SI.No.4 Le.Antimony
Trioxide
may be allowed
as 1.0SKgs/Kg
content in the export items at SI.No.1 to 23,26
to 39, 42, 45 to 74.
6. Quantity of import item at SI.No.5 Le.Galvanised
Steel Wire/G. I Wire may be allowed as
1.02Kgs/Kg content in the export items at SI.No.3 to 22 and 47 to 74.
7. Quantity
of import
item
at SI.No.6
Le.Copper
Tape/Copper
Foil
may
be allowed
as
1.01Kgs/Kg content in the export items at SI.No.13 to 23.
8. Quantity of import item at SI.No.7 Le.Aluminium
Wire Rod(EC grade) may be allowed as
1.01Kgs/Kg content in the export items at SI.No.12, 23 and 24.
9. Quantity
of import
item at SI.No.8
Le.Semi
Conductive
Water
Blocking
Tape
may be
allowed as 1.01Kgs/Kg content in the export items at SI.No.22, 24 and 25.
10. Quantity of import item at SI.No.9 i.e.HDPE may be allowed as 1.05Kgs/Kg
content in the
export items at SI.No.24 and 25.
11. Quantity of import item at SI.No.1 0 Le.Nylon Compound
may be allowed as 1.0SKgs/Kg
content in the export items at SI.No.23 and 24.
12. Quantity of import item at SI.No.11 i.e.Lead Alloy may be allowed as 1.01 Kgs/Kg content
in the export items at SI.No.22 and 23.
Norms Committee may take a view.
~
~.
- --
u"l'"
YI ,. l .J
(S. K. Jain)
Development
Officer
Tel.23063166
E-mail: sushilk.jain@nic.in
DGET(Shrj Shobhjt Gupta. Dy. DGET. DES-II)
DPIIT U.O.NO. P-47011/9S/2019-TSW
dated
08.12.2020

t"lIe NO."'-4IUl1111~'~U~U-1~yy
3lR"RmcFiR
cUfU'l"l <:I 3fit ~
I'i:;j Ii'I <:I
3t:\,m1l1 ~
3fit ~~fcmm
Government of India
Ministry of Commerce & Industry
Department
for Promotion of Industry & Internal Trade
(Technical Support Section)
*********
## Subject: - MIs Polycab India Limited, A.A. No. 0310839058 dated 21.10.2020
Ref.: DGFT F. No. 01/81/050/00801/AM21
DGFT(DES-2)
may kindly refer to their e-mail dated 26th November
2020 forwarding
firm's
application
for
fixation
of norms
in respect
of the
above-mentioned
A.A.
In this
,connection,
the undersigned
is directed to say that the instant A.A. may be ratified as under:-
1. Description, Sizes, quantities
and net weight of export item at SI.No.1 to 10 under the
Advance Authorization
may be specified as under:
Sr.
Size & Description Of Cables
Qty
Total Cable
No.
(MTRS)
wt (MT)
1
Copper Conductor XLPE Insulated ZHFR Sheathed
Armoured Cable 8elow 1000 V.
.
1.01 3 Core X 1.5 Sq. MM
30000
8.039
1.02 4 Core X 6 Sq. MM
10000
7.088
1.03
4 Core X 1.5 Sq. MM
25000
7.595
1.04 4 Core X 2.5 Sq. MM
20000
7.886
1.05
3 Core X 2.5 Sq. MM
10000
3.453
1.06 4 Core X 4 Sq. MM
10000
7.088
1.07 4 Core X 10 Sq. MM
5000
4.765
1.08 ~ Core X 1.5 Sq. MM
5000
1.743
1.09 5 Core X 2.5 Sq. MM
10000
4.528
1.10 5 Core X 4 Sq. MM
10000
5.766
1.11 sce-e x e Sq. MM
10000
8.231
1.12 5 Core X 10 Sq. MM
5000
5.609
1.13 ~ Core X 16 Sq. MM
5000
6.165
1.14 5 Core X 16 Sq. MM
5000
8.108
1.15 2 Core X 1 Sq. MM
1500
0.474
1.16 ~ Core X 1.5 Sq. MM
24000
6.431
1.17 ~ Core X 1.5 Sq. MM
15000
4.557
1.18 ~ Core X 2.5 Sq. MM
14000
5.520
1.19 ~ Core X 4 Sq. MM
15000
7.396
1.20 ~ Core X 10 Sq. MM
10000
9.530
1.21 ~ Core X 2.5 Sq. MM
10000
4.528
1.22 5 Core X 4 Sq. MM
10000
5.766
1.23 5 Core X 6 Sq. MM
10000
8.231

rll8
•••0 ••••.•••' U't't/'t't
~/~U~U-t ~VV
1.24 ~ Core X 16 Sq. MM
10000
12.32i
1.25 ~ Core X 4 Sq. MM
10000
4.222
1.26
3 Core X 6 Sq. MM
10000
5.199
1.27 3 Core X 1.5 Sq. MM
6000
1.608
1.28 4 Core X 1.5 Sq. MM
5000
1.519
1.29 4 Core X 2.5 Sq. MM
6000
2.366
1.30 4 Core X 4 Sq. MM
5000
2.465
2
Copper Conductor XLPE Insulated PVC Sheathed
Armoured Cable Below 1000 V.
2.01
~ Core X 1.5 Sq. MM
30000
7.954
2.02
~ Core X 1.5 Sq. MM
25000
7.520
2.03
~ Core X 2.5 Sq. MM
20000
7.805
2.04
~ Core X 10 Sq. MM
10000
9.474
2.05
~ Core X 4 Sq. MM
7500
3.136
2.06
~ Core X 6 Sq. MM
5000
2.577
2.07
~ Core X 4 Sq. MM
10000
4.887
2.08
~ Core X4 Sq. MM
5000
2.686
2.09 ~CoreX6Sq.
MM
10000
7.728
2.10 ~ Core X 10 Sq. MM
5000
5.253
2.11 ~ Core X 1.5 Sq. MM
9000
2.386
2.12 ~ Core X 2.5 Sq. MM
10000
3.415
2.13
4 Core X 6 Sq. MM
10000
7.038
2.14
5 Core X 16 Sq. MM
5000
7.662
2.15
4 Core X 16 Sq. MM
10000
12.268
2.16
5 Core X 2.5 Sq. MM
10000
4.225
2.17
2 Core X 1.5 Sq. MM
1500
0.474
2.18
4 Core X 1.5 Sq. MM
15000
4.512
2.19
4 Core X 2.5 Sq. MM
14000
5.464
2.20
4 Core X 10 Sq. MM
10000
9.474
2.21
~ Core X 6 Sq. MM
15000
10.556
2.22 ~ Core X 1.5 Sq. MM
5000
1.504
2.23
4 Core X 2.5 Sq. MM
6000
2.342
2.24
4 Core X 6 Sq. MM
5000
3.519
3
Copper Conductor XLPE Insulated PVC Sheathed
Unarmoured Cable Below 1000 V.
3.01
1 Core X 150 Sq. MM
500
0.742
4
Copper Conductor XLPE Insulated PVC Sheathed GI
Double Steel Tape Armoured
Cable Below 1000 V.
4.01
3 Core X 2.5 Sq. MM
2730
0.837
4.02
3CoreX4Sq.
MM
550
0.210
4.03
4 Core X 2.5 Sq. MM
1370
0.485
4.04
3.5 Core X 35 Sq. MM
1075
2.096
4.05
5 Core X 2.5 Sq. MM
500
0.203

r-ue NO.~-4{Ull/11~~U~U·I:»YV
4.06
i'- Core X 4 Sq. MM
500
0.224
4.07
~ Core X 16 Sq. MM
770
0.826
4.08
~.5 Core X 185 Sq. MM
500
4.453
4.09
~ Core X 10 Sq. MM
1200
0.776
4.10
~ Core X 35 Sq. MM
720
1.172
4.11
3 Core X 70 Sq. MM
770
2.279
4.12
3.5 Core X 50 Sq. MM
510
1.308
4.13
3.5 Core X 95 Sq. MM
500
2.502
4.14
5 Core X 16 Sq. MM
500
0.641
4.15
5 Core X 50 Sq. MM
510
2.535
4.16
~.5 Core X 150 Sq. MM
1080
8.047
5
~opper Conductor XLPE Insulated PVC Sheathed
Unarmoured Cable Below 1000 V.
5.01
3 Core X 1.5 Sq. MM
4000
0.514
5.02
5 Core X 1.5 Sq. MM
4000
0.735
5.03
3 Core X 2.5 Sq. MM
4000
0.673
5.04
5 Core X 2.5 Sq. MM
5000
1.229
5.05
3 Core X 4 Sq. MM
2500
0.545
5.06
5CoreX4Sq.
MM
4000
1.291
5.07
3 Core X 6 Sq. MM
1500
0.432
5.08
5 Core X 6 Sq. MM
2500
1.081
5.09
5 Core X 10 Sq. MM
1500
0.981
5.10
5 Core X 16 Sq. MM
4000
3.840
5.11
5 Core X 25 Sq. MM
500
0.631
5.16
5 Core X 35 Sq. MM
500
0.802
5.17
5 Core X 50 Sq. MM
500
1.140
5.18
5 Core X 70 Sq. MM
750
2.362
5.19 ~ Core X 95 Sq. MM
400
1.657
5.20 ~ Core X 120 Sq. MM
400
2.136
5.21 ~ Core X 150 Sq. MM
300
1.924
5.22 Is Core X 185 Sq. MM
300
2.384
5.23 ~ Core X 240 Sq. MM
500
5.151
5.24 ~ Core X 300 Sq. MM
500
6.401
5.25 ~ Core X 2.5 Sq. MM
1000
0.234
5.26
~ Core X 2.5 Sq. MM
1000
0.161
5.27 3 Core X 4 Sq. MM
750
0.163
5.28 5 Core X 4 Sq. MM
750
0.242
5.29
3 Core X 6 Sq. MM
750
0.216
5.30
~ Core X 1.5 Sq. MM
750
0.093
5.31
~ Core X 10 Sq. MM
750
0.491
5.32
~ Core X 16 Sq. MM
750
0.720
6
~opper Conductor PVC Insulated Unarmoured Cable
~elow 1000 V.
6.01
1 Core X 16 Sq. MM
1000
0.167
,.",
__
~
.A
•••_.

r-ue NO."'-4IU"'""'I~/~U~U-1
~n
6.02
1 Core X 25 Sq. MM
1000
0.261 .•.
7
rt'lnned Copper
Conductor
ZHFR Insulated
ZHFR
Sheathed
Unarmoured
Solar Cable 1500 V.
7.01
1 Core X 6 Sq. MM
100000
7.810
7.02
1 Core X 6 Sq. MM
36000
2.484
Copper
Conductor
XLPE Insulated
Overall
Shielded
ZHFR
8
Sheathed
Armoured
Instrumentation
Cable Below
1000
V.
8.01
12 Core X 2.5 Sq. MM
2030
1.779
8.02
24 Core X 2.5 Sq. MM
2310
3.697
8.03
10 Core X 2.5 Sq. MM
1260
1.011
8.04 2 Core X 2.5 Sq. MM
490
0.173
8.05
1 Pair X 1.5 Sq. MM
2100
0.537
Copper
Conductor
XLPE Insulated
I & 0 Shielded
ZHFR
9
Sheathed
Armoured
Instrumentation
Cable Below
1000
V.
9.01
12 Pair X 1.5 Sq. MM
10570
15.252
9.02
~4 Pair X 1.5 Sq. MM
1540
4.060
9.03 6 Pair X 1.5 Sq. MM
10920
10.172
9.04
10 Pair X 1.5 Sq. MM
1260
1.670
9.05
12TX
1.5Sq.
MM
2450
4.368
9.06
~ T X 1.5 Sq. MM
8680
9.763
9.07
12 T X 1.5 Sq. MM
1260
2.247
9.08
~4 T X 1.5 Sq. MM
1540
5.049
10
lCopper Conductor
Covered
With Glass Mica Tape XLPE Insulated
Overall
iShlelded ZHFR Sheathed
Armoured
Cable Below
1000 V.
10.01 ~Pair X 1.5 Sq. MM
490
0.266
10.02 ~ Core X 2.5 Sq. MM
490
0.353
10.03 ~ Pair X 1.5 Sq. MM
490
0.457
2. Quantity of import item at SI.No.1
i.e. Copper Cathode
may be allowed
as 1.01Kgs/Kg
content in the export Items at SI.No.1 to 10.
4. Quantity of import item at SI.No.2 i.e. LOPE may be allowed as 1.05Kgs/Kg
content in the
export items at SI.No.1 to 5 and 8 to 10.
6. Quantity of Import Item at SI.No.3 Le. pve Resin may be allowed as 1.05Kgs/Kg
content
in the export items at SI.No.2 to 6.
7. Quantity of import item at SI.No.4 i.e. Plasticizer may be allowed as 1.05Kgs/Kg content in
the export items at SI.No.2 to 6.
8. Quantity of import item at SI.No.5 i.e. Steel Wire Rod may be allowed
as 1.02Kgs/Kg
,
1---

t"1I8 NO.~-4IUllI11~"U"U-1
O)yy
cententsn the export items at SI.No.1 , 2 and 8 to 10.
9. Quantity of import item at SI.No.6 l.e. Zinc Ingot may be allowed as 4% of weight of Steel
Wire Rod.
10. Quantity
of import
item at SI.No.7
i.e. Vinyl
Trimethoxy
Silane
may
be allowed
as
1.05Kgs/Kg content in the export items at SI.No.1 to 5 and 8 to 10.
11. Quantity of import
item atSI.No.8
i.e. Tert Butyl Cumyl Peroxide
may be allowed as
1.05Kgs/Kg content in the export items at SI.No.1 to 5 and 8 to 10.
12. Quantity of import item at SI.No.9 l.e. Antioxident
may be allowed as 1.05Kgs/Kg
content
in the export Items at SI.No.1 to 5 and 7 to 10.
13. Quantity of import
item at SI.No.10
l.e. Aluminium
Trihydrate
Fire Retardant
may be
allowed as 1.05Kgs/Kg content in the export items at SI.No.1 and 7 to 10.
14. Quantity
of import
item
at SI.No.11
i.e. Magnesium
Hydroxide
may
be allowed
as
1.05Kgs/Kg content in the export items at SI.No.1 and 7 to 10.
15. Quantity
of import
item at SI.No.12
l.e. Ethylene
Vinyl
Acetate
may
be allowed
as
1.05Kgs/Kg content in the export items at SI.No.1 and 7 to 10.
16. Quantity
of import
item at SI.No.13
I.e. Ethylene
Acrylic
Ester
Co-Polymer
may be
allowed as 1.05Kgs/Kg content in the export items at SI.No.1 and 7 to 10.
17. Quantity
of
import
item
at
SI.No.14
l.e.
Grafted
Co-Polymer
may
be
allowed
as
1.05Kgs/Kg content in the export items at SI.No.1 and 7 to 10.
18. Quantity of import item at SI.No.15 i.e. Polyolefin Elastomer may be allowed as 1.05Kgsl
Kg content in the export items at SI.No.1 and 7 to 10.
22. Quantity of import item at SI.No.16 i.e. Glass Mica Tape may be allowed as 1.02 Kgs/Kg
content in the export item at SI.No.1 O.
22. Quantity of import item at SI.No .17 and 18 may be allowed as per packing policy.
Norms Committee may take a view.
~--
/--:,--
"'Y"'I~I1.....> .•..•.
(S.K.Jain)
Development
Officer
Tet.23063166
E-mail: sushilk.jain@nic.in
DGFT(Shd Shobhjt Gupta. Dy. DGFT. DES-II)
DPIIT U.O.NO.P-47011/112/2020-TSW
dated
08.12.2020

Ertil
SNu
l~_
,'-' ),gl
DGFT Norms Committee
2
Re: Ratification
of norms in respect of Advance Authorization
issued under Para 4.7 of
HBP, Vol. I.
From: niravmehta amco <niravmehta.amco@gmail.com>
Subject:
Re: Ratification of norms in respect of Advance
Authorization issued under Para 4.7 of HBP,Vol. 1.
To : DGFT Norms Committee 2 <nc2.dgft@nic.in>
Cc : Shobhit Gupta Dy. DGFT <shobhit.gupta@gov.in>
Mon, Sep 21, 2020 12:14 PM
.@1 attachment
Respected Sir,
As per your trailing
email received on 18th September,2020,
we submit herewith
the detailed
working of no. of units of each part number to be exported against License No. 0310833737.
Hope this will suffice your requirement.
On Fri, Sep 18, 2020 at 5:58 PM DGFT Norms Committee 2 <nc2.dgft@nic.in>
wrote:
Dear SirlMadam,
Please refer to the decision of Minutes of Norms Comrnittee-Z Meeting as under:-
-
## Case No.:22/20/81-
Party Name: UPR
Meet No/Date:5/81-
Status:
ALC2/2019
ENGINEERING PRIVATE
ALC2/2020
Deferred
LIMITED
16.07.2020
HQ File
RLA File
Lic.NolDate:031 08337 Action by
:01/81/0501003741 AM201
:03195/0401009461 AM201
37
:
9
27.12.2019
Applicant
3
Decision: The Committee considered the case as per agenda and decided to seek from the
applicant to furnish following information as per comments ofMSME:
1. Number of units of each part number to be exported.
2. You are requested to send the desired information for considering your case. You are requested to
expedite the same, so as to reach this office well before 26-09-2020.

-
UPR Engineering Pvt. Ltd.
Working of Number of units of each part number to be exported.
Export Item Name
Quantity
Blank size
Net weight
Total export
in
per unit
per unit
weight (in
Numbers
(in kg)
kg.)
NUT UNION (Part No. AS15704)
2170
0.146753
0.02721
59.0457
-- r---
-
-
NUT UNION (Part No. AS15707)
4150
0.272735
0.052285
216.98275
NUT UNION (Part No. AS15706)
4000
0.177545
0.048231
192.924
--
NUT UNION (Part No. AS15701)
1000
0.057821
0.014326
14.326
--
RING (Part No. CH125-03-0492)
1994
0.074465
0.009179
18.302926
--
FERRULE(Part No. BRR40837)
100
0.159088
0.034725
3.4725
RING (Part No. 798-0031)
280
0.044534
0.027158
7.60424
SHIM (Part No. CH125-03-0280)
230
0.044534
0.006513
1.49799
SHIM (Part No. CH125-03-0302)
150
0.044534
0.004754
0.7131
WASHER(Part No. CH1541-0134)
290
0.044534
0.007586
2.19994
WASHER(Part No. 790-0003)
440
0.074465
0.027737
12.20428
--
SHIM (Part No. 1007-0047)
224
0.074465
0.017264
3.867136
-
SHIM (Part No. 537AOOlO-01)
150
0.046257
0.005537
0.83055
SHIM (Part No. 790-0004)
1500
0.142036
0.009793
14.6895
SHIM (Part No. 788-0002)
350
0.074465
0.020483
7.16905
RING (Part No. 795-0040)
100
0.029478
0.004016
0.4016
.-
RING (Part No. 800-0017)
450
0.16775
0.0652
29.34
-- ------
--
RING (Part No. 795-0029)
396
0.046257
0.003177
1.258092
---
--
-
RING (Part No. CH125-03-0131)
800
0.009115
0.002824
2.2592
RING (Part No. 829-0019)
350
0.027029
0.000697
0.24395
RING(Part No. CH1541-0116)
250
0.009115
0.00253
0.6325
SHIM (Part No. CH125-03-0323)
160
0.031473
0.006178
0.98848
SHIM (Part No. CH125-03-0320)
150
0.031473
0.008532
1.2798
SHIM (Part No. 798-0008)
292
0.052243
0.006614
1.931288
- -
SHIM (Part No. CH125-03-0352)
250
0.031473
0.013132
3.283
SHIM (Part No. CH3151-0034)
300
0.018594
0.004772
1.4316
SHIM (Part No. CH3151-0044)
200
0.018594
0.003129
0.6258
SHIM (Part No. CH2827-0043)
150
0.009115
0.0021
0.315
SHIM (Part No. CH3230-0010)
200
0.009115
0.004244
0.8488
--
RING(Part No. 796-0401)
450
0.069567
0.03256
14.652
RING (Part No. CH125-03-0390)
320
0.047663
0.010191
3.26112
-
WASHER(Part No. CH2827-0042)
500
0.047663
0.0071
3.55
RING (Part No. 798-0060)
~
600
0.079181
0.020222
12.1332
RING (Part No. CH3123-0245)
200
0.047663
0.009101
1.8202
RING (Part No. 1065-0402)
450
0.115144
0.039
17.55
WASHER(Part No. CH3230-0016)
150
0.004626
0.003419
0.51285
--
RING (Part No. 798-0057)
540
0.004626
0.003024
1.63296
RING (Part No. CH3230-0008)
300
0.006666
0.00146
0.438
-

UPR Engineering Pvt. Ltd.
Working of Number of units of each part number to be exported.
Export Item Name
Quantity
Blank size
Net weight
Total export
in
per unit
per unit
weight (in
Numbers
(in kg)
kg.)
RING (Part No. CH125-03-0270)
1000
0.022494
0.004316
4.316
RING (Part No. CH3151-0005)
900
0.074465
0.014424
12.9816
-
WASHER(Part No. 060643)
500
0.074465
0.007029
3.5145
RING (Part No. CH3123-0013)
350
0.074465
0.019584
6.8544
----
--
ADAPTOR(Part No. BRR40835)
350
0.182897
0.028975
10.14125
RING (Part No. 795-0023)
262
0.01161
0.002845
0.74539
RING (Part No. CH125-03-0290)
590
0.044534
0.009598
5.66282
WASHER(Part No. CH125-09-0430)
400
0.047663
0.007399
2.9596
WASHER(Part No. CH1541-0050)
300
0.074465
0.02307
6.921
WASHER(Part No. CH3152-0026)
400
0.036734
0.0136
5.44
SHIM (Part No. CH2151-0044)
150
0.0046
0.001335
0.20025
SHIM (Part No. CH125-02-0171)
120
0.0091
0.001745
0.2094
SPACER(Part No. 1064-0002)
150
0.00313
0.00157
0.2355
SPACER(Part No. 799-0001)
195
0.002947
0.001578
0.30771
- --
SHIM (Part No. CH125-03-0420)
250
0.0476
0.010902
2.7255
SPLITRING (Part No. 795-0010)
500
0.098954
0.02721
13.605
PIN, SHOULDER,HEADLESS(Part No. AS44805)
500
0.00458
0.001575
0.7875
PIN, SHOULDER,HEADLESS(Part No. AS44803)
1000
0.003764
0.001178
1.178
FERRULE,BLANK (Part No. AS15839)
150
0.021677
0.01
1.5
WASHER(Part No. 1062-0002)
100
0.0313
0.00807
0.807
WASHER(Part No. 924-0008)
100
0.055735
0.007632
0.7632
CARDHANDLEMACHINED (Part No. 86622670)
50
0.2734
0.02407
1.2035
NUT UNION (Part No. AS15709)
155
0.328
0.0878
13.609
SPACER(OUTER)(Part No. CH2465-0023)
250
0.2607
0.05348
13.37
ADAPTOR(Part No. AS15845)
155
0.1167
0.052802
8.18431
WASHER(Part No. CH2811-0008)
100
0.0419
0.00657
0.657
SHIM (Part No. CH125-03-0213)
120
0.0159
0.00066
0.0792
,
--
WASHER(Part No. 954-0706)
150
0.052515
0.026597
3.98955
WASHER(Part No. 926-0205)
150
0.018593
0.017505
2.62575
SPACER(Part No. 795-0052)
300
0.0185
0.00051
0.153
WASHER(Part No. CH2811-0007)
200
0.0476
0.019808
3.9616
WASHER(Part No. 954-0704)
150
0.097638
0.023641
3.54615
-
----
--
SPACER(Part No. 6A2035C01)
2500
0.012607
0.000875
2.1875
--
-
I--
SPACER(Part No. 6A2035C02)
2500
0.012607
0.000767
1.9175
SPACER(Part No. 6A2035C03)
2500
0.012607
0.000661
1.6525
SPACER(Part No. 6A2035C04)
2500
0.012607
0.000465
1.1625
SPACER(Part No. 6A2035C06)
4000
0.012607
0.000369
1.476
FERRULE,TUBE (Part No. UL28555)
200
0.316997
0.0701
14.02
--
REDUCER,TUBE-WELDING (Part No. K18213)
200
0.046393
0.004015
0.803

UPR Engineering
Pvt. Ltd.
Working
of Number
of units of each part number
to be exported.
Export Item Name
Quantity
Blank size
Net weight
Total export
in
per unit
per unit
weight
(in
Numbers
(in kg)
kg.)
REDUCER, TUBE-WELDING
(Part
No. K18213)
200
0.046393
0.004015
0.803
ADAPTOR, ELBOW, PIPE (Part
No. AS63010)
500
0.631317
0.057
28.5
ADAPTOR (Part No. AS27472)
200
0.243212
0.056834
11.3668
ADAPTOR, STRAIGHT, PIPE (Part No. AS27422)
50
0.588053
0.060229
3.01145
WELDING
RING (Part No. AS52841)
105
0.1211
0.00624
0.6552
FERRULE, ELBOW FLARELESS 1/4"
X 22 SWG (Part No.
120
0.365022
0.01663
1.9956
FW56364)
-
ADAPTOR, UNION,
PIPE (Part
No. AS15818)
150
0.525
0.0886
13.29
WELDING
RING (Part No. AS52826)
100
0.0214
0.00989
0.989
ADAPTOR, 2 BOLT THREADED (Part No. FW88962)
50
0.6247
0.046454
2.3227
BACK-UP RING (Part No. 829-0018)
1200
0.043
0.003781
4.5372
ADAPTOR, STRAIGHT, PIPE (Part No. AS27366)
50
0.8718
0.1566
7.83
RING WELDING
(Part No. AS52830)
1000
0.0386
0.00414
4.14
FERRULE, LONG REACH (Part No. FW42500)
250
0.13918
0.015135
3.78375
--
REDUCER, TUBE-WELDING
(Part
No. K18213)
50
0.046393
0.004015
0.20075
ADAPTOR, 2 BOLT THREADED (Part No. FW88962)
100
0.808092
0.04645
4.645
BACK-UP RING (Part No. 829-0018)
1200
0.045214
0.00379
4.548
LOCK WASHER (Part No. CH1447-0002)
100
0.063898
0.00483
0.483
ADAPTOR, STRAIGHT, PIPE (Part No. AS27422)
150
1.2967
0.060229
9.03435
FERRULE, REDUCER (Part
No. FW79623)
50
0.049432
0.011671
0.58355
---
--
-
--
---
WELDING
RING (Part No. AS52838)
100
0.038185
0.00832
0.832
--
-
--
FERRULE, ELBOW FLARELESS 1/4"
X 22 SWG (Part No.
100
0.314729
0.01657
1.657
FW56364)
FERRULE (Part No. AS15730)
255
0.018412
0.012249
3.123495
ADAPTOR, ELBOW, PIPE (Part
No. AS63010)
150
0.631317
0.057
8.55
RING, WELDING
(Part No. AS52829)
200
0.0078
0.002568
0.5136
RING, WELDING
(Part No. AS52825)
200
0.0943
0.01687
3.374
ADAPTOR (Part No. AS15818)
100
0.525
0.0886
8.86
ADAPTOR (Part No. AS15804)
250
0.0943
0.00282
0.705
FERRULE, STRAIGHT (Part No. FW79628)
100
0.293369
0.059986
5.9986
TUBE INNER (Part No. 797-0022)
5000
0.17065
0.00658
32.9
ADAPTOR, STRAIGHT (Part No. KH17555)
150
2.500055
0.084703
12.70545
ADAPTOR, UNION
PIPE (Part No. AS15810)
150
0.18793
0.037445
5.61675
1000 Kgs