Revised DEPB rates for the Product Group – Engineering

Downloaded from http://www.nic.in/eximpol TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY (PART-I, SECTION-1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE AND INDUSTRY
PUBLIC NOTICE NO - 13 /(2004-2009) NEW DELHI : DATED 06.10.2004
In exercise of powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-2009 and Paragraph 1.1 of the Handbook of procedures (Vol.I), the Director General of Foreign Trade hereby makes amendments/additions/corrections etc. in the Book titled Schedule of DEPB rates as annexed to this Public Notice.
This issues in Public Interest.
(K.T CHACKO) DIRECTOR GENERAL OF FOREIGN TRADE
(Issued from File No. File No. 01/80/162/00010/AM04/DES-I)

2

ANNEXURE

PRODUCT GROUP: ENGINEERING PRODUCTS
PRODUCT CODE 61 Sl. No. Export Product DEPB Rate (%) Value Cap 1 2 3 4

1 All Aluminium conductors (AAC) bare 9 . 2 Aluminium Conductors Steel Re-inforced (ACSR) 8 . 3 Aluminium conduit bodies made of Aluminium and other alloying constituents 7 . 4 Aluminium Flexible Tubing 7 . 5 Deleted
. 6 Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of 7 . 7 Extruded aluminium products including pipe and tubes 7 . 8 Cast articles including parts/components of Aluminium 7 Rs.125/Kg 9 Rolled Aluminium plates, sheets, strips including corrugated Aluminium sheets/strips 7 . 10 11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm sq. 11 . 11 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq. 11 . 12 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq. 11 . 13 600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq 11 . 14 600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq. 11 .

3 15 600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq. 11 . 16 600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq.
11 . 17 600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq.
11 . 18 600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4x120 Sq.mm
11 . 19 Electrical Wiring Accessories wholly made of Brass
7 Rs.240/Kg. 20 Complete ceiling fan with metal blades (36"/42 /48 /56 /60 ) 5 . 21 Electric Pedestal Fan
7 . 22 Electrical Fan with Table Stand/Wall Bracket 7 . 23 Fluorescent Tubes (18/20 /36/40 Watts)
10 . 24 Galvanized transmission line towers and parts thereof
3 Rs.45/Kg. 25 GLS Lamps (upto 100 Watts and below)
10 . 26 H.P.M.V. Lamps (250 W)
10 . 27 H.P.S.V Lamps (250 W)
10 . 28 H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)
10 . 29 H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)
10 . 30 Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor.
11 . 31 Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor
11 . 32 Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor
11 . 33 Marine Cable flexible Non Burning (TPR) 4 X 1.5 8 . 34 Marine Cable flexible Non Burning (TPR) 4 X 2.5 8 . 35 Marine Cable flexible Non Burning (TPR) 12 X 1.5 8 . 36 Marine Cable flexible Non Burning (TPR) 3 8 .

4 X 4.00 37 Marine Cable flexible Non Burning (TPR) 3 X 6.00 8 . 38 Marine Cable flexible Non Burning (TPR) 2 x 1.5 8 . 39 Marine Cable flexible Non Burning (TPR) 3 x 1.5 8 . 40 Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5
8 . 41 laying (PVC) 2 X 2.5
8 . 42 laying (PVC) 3 X 1.5
8 . 43 laying (PVC) 3 X 2.5
8 . 44 laying (PVC) 3 X 10.00 8 . 45 laying (PVC) 3 X 16.00 8 . 46 laying (PVC) 3 X 25.00
8 . 47 laying (PVC) 3 X 50.00
8 . 48 laying (PVC) 3 X 70.00 8 . 49 laying (PVC) 3 X 95.00
8 . 50 laying (PVC) 7 X 1.5
8 . 51 laying (PVC) 12 x 1.5
8 . 52 Out door Weather proof light fitting round/ Oval Shape with Glass Shell excluding Automotive light fittings.
8 . 53 Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC Shroud And (with or without ring, lock and nut) 9 . 54 Single Phase Electrical Energy Meter
8 . 55 11 KV straight through Joints for XLPE Copper Cable size 3 x 95 Sq. mm.
9 .

5 56 Starter Motor Armature for High Speed Vehicles Cars etc.
6 . 57 Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)
7 . 58 Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)
7 . 59 Steel Welding Electrodes
6 . 60 Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII
5 . 61 Three Phase Electrical Energy Meter
6 . 62 Tinned/Untinned copper cables lugs /sockets/ connections
7 Rs.260/Kg 63 Tinned/Untinned copper ferules
7 Rs.260/Kg 64 Tinned/Untinned copper terminals ends 7 Rs.260/Kg. 65 Deleted . . 66A Nuts/Bolts/screws/washers made of Alloy steel including stainless steel
8 Rs.60/Kg. 66B Nuts/Bolts/Screws/washers made of Non- alloy Steel 3 Rs.25/Kg 67A Bright bars made out of Stainless Steel 7 Rs.80/Kg. 67B Bright bars made out of Mild Steel 2 Rs.23.50/Kg 67C Bright bars made out of items other than Stainless Steel and mild steel 5 Rs.24/Kg. 68A Carbon Steel/ Non Alloy Steel Forgings (Machined) 3 Rs.105/Kg. 68B Alloy Steel Forgings (Machined) 10 Rs.175/Kg 68C Stainless steel forgings (Machined) 10 Rs.400/Kg. 69A Carbon Steel/Non Alloy Steel Forgings (Rough)
3 Rs.85/Kg. 69B Alloy Steel Forgings (Rough)
10 Rs.125/Kg 69C Stainless steel forgings (rough) 10 Rs.300/Kg. 70 A High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Alloy steel including stainless steel 6 Rs.60/Kg. 70 B High tensile precision fastners Cold/ Hot forged Bolts/ Screws/ Nuts-All varieties of Non-Alloy steel
2 Rs.25/Kg. 71 A Hot forged nuts of Alloy Steel including stainless steel
8 Rs.60/Kg. 71 B Hot forged nuts of Non-Alloy Steel
3 Rs.25/Kg. 72 Cast Iron Products (Rough/Machined) (not elsewhere specified)
3 .

6 73 Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or steel 2 Rs.40/Kg. 74 Chisels made of forging quality carbon steel 3 Rs.60/Kg. 75 Drop forged Pliers of Alloy/Non-Alloy Steel 7 Rs.125/Kg 76 Hand Drill
3 . 77 High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile)
7 . 78 Pipe Wrenches
4 Rs.85/kg 79 Punches
2 . 80 Screw Drivers (Nickel plated)
2 . 81 Spanners made of alloy/non alloy steel 7 Rs.125/kg 82 Steel files of Alloy Steel
7 . 83 Steel files of High Carbon Steel
2 . 84 Steel Vices
4 Rs.65/kg 85 Cold Rolled Galvanized, Colour coated Non-Alloy steel sheets/ hoops and strips/ wide coils (plain / corrugated) 6 Rs.29/Kg 86 2" Galvanized flanges with rubber gaskets 4 . 87 2" Galvanized/ Zinc Coated Bungs
4 . 88 2" Galvanized/Zinc coated Flange
4 . 89 3/4" Flanges with or without Washer
4 . 90 3/4" Galvanized bungs with rubber gaskets 4 . 91 3/4" Galvanized flanges with rubber gaskets
4 . 92 3/4" Galvanized Zinc coated Bungs
4 . 93 3/4" Galvanized/ Zinc coated Flanges
4 . 94 Adjustable Bracket made out of MS sheet 4 . 95 Wood to steel adapter (All Types)
4 . 96 Aluminium collapsible tubes
7 . 97 Aluminium Pencil Sharpener
6 . 98 Aluminium rivets
9 . 99 Aluminium Utensils with Interior PTFE Coating & Exterior painted (non-stick) with/ without handle. 4 . 100 Animal Drawn Ploughs/ Parts thereof
2 . 101 Arm Blade
3 Rs.20/Kg. 102 Aruvil Double Wheel Carrier kit Set
3 . 103 Axes
2 .

7 104 Ball Chain Cap 4 . 105 Barb Arm
3 . 106 Barb Arm Base 4 . 107 Black Pipes/ tubes including precision Tubes
3 Rs.30/Kg. 108 Bottom/Top Plate UM-1 made of Tin Plate 3 . 109 Box Hinge
4 . 110 Brace Band
4 . 111 Brace Rail End
4 . 112 A Nuts milled from bar process of Alloy Steel including Stainless Steel 8 Rs.60/Kg. 112 B Nuts milled from bar process of Non-Alloy Steel
3 Rs.25/Kg. 113 Brass Builder Hardware
5 Rs.325/Kg. 114 Brass Tubes
8 Rs.150/Kg. 115 Brass valves
5 . 116 Bull Dog Hinge
4 . 117 Seamless Butt Welded Steel Pipe Fittings made from Seamless/ERW Steel Tube 11 Rs.120/Kg. 118 Cl Cistern 3 . 119 Cl pipes and Fitting, not elsewhere specified 3 . 120 Coil Spring / Helical Coil Spring
3 Rs.20/Kg. 121 Collar of M.S. Sheet
3 . 122 Corner Arm
4 . 123 Crow Bar /Wrecking Bar
3 Rs.35/Kg. 124 Cultivator made of mild steel
2 . 125 Cut Hand tacks made of M.S. Sheets
2 . 126 Decorative Handicrafts/ Art wares made of Anodized Aluminium 4 . 127 Door/ Window/ ventilator Sections made of mild steel
2 . 128 Double Carrier Wheel
4 . 129 Drag Link Chain
3 . 130 Ductile Iron Spun Pipes 1 . 131 Electrolytic Tinplate components
2 . 132 Round/Elliptical /Oval Tin Plate container and/ or components thereof
3 . 133 Deleted . . 134 Female Hinge
3 . 135 Flange Plate
3 .

8 136 Floor Flange 4 . 137 Fork
3 . 138 Fork digging with socket
3 . 139 Galvanized non alloy Steel Wire Ropes (wire steel core)
4 . 140 Galvanized non alloy Steel Wire Ropes (fibre core)
4 . 141 Deleted . . 142 Deleted . . 143 Deleted . . 144 Deleted . . 145 Deleted . . 146 Deleted . . 147 Deleted . . 148 Deleted . . 149 Deleted . . 150 Deleted . . 151 Deleted . . 152 Deleted . . 153 Galvanized Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3
4 Rs.35/Kg. 154 Gate Clip Made of Mild Steel
4 . 155 Gate Hold Back made of Mild Steel
4 . 156 Gate Latch Made of Mild Steel
4 . 157 Gun metal valves
5 . 158 MS Color coated ghamla (made of HS Steel) 3 . 159 Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator)
1 . 160 Heavy duty Fork latch
4 . 161 Deleted . . 162 Deleted . . 163 High Chromium Grinding media balls
5 Rs.35/Kg. 164 Hot Dipped Galvanized tension Bar/ Gate Rods/ Truss Rods/ Drop Rods.
2 . 165 ILD Fork
4 . 166 ILD Guide
4 . 167 Industrial Offset Hinge
4 . 168 Industrial Offset Bracket
4 . 169 Industrial Locking Device
4 .

9 170 J-bracket 4 . 171 Locks and valves water pipe fitting
3 . 172 Loop Cap Made of Mild Steel
4 . 173 LPG Cylinders with valves
4 . 174 Male Hinge/Male Bracket Made of Mild Steel
4 . 175 Male Lag Bracket Made of Mild Steel
4 . 176 Marine freight containers of type ICC 20 x8 x8.5
9 . 177 MS Paper pin & Clip
3 Rs.40/Kg. 178 Steel Needle Screws Self colour or Plated 7 . 179 Nickel Plated M S Buckles
3 . 180 Offset Rail End
4 . 181 OTS Cans/ dingeley cans
4 . 182 Oxygen Cylinder dia 140 NF
3 . 183 Oxygen Cylinder dia 229 MM
3 . 184 Deleted . . 185 Photo frame (Brass)
7 . 186 Presensitised Positive Offset Aluminium plates
9 . 187 Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass
5 . 188 Rail End
5 . 189 Rakes/Garden Rakes/ Fork Manure Hooks made of Iron and/or Steel
3 . 190 Rectangular/ Square Tin Plate container and/ or components thereof
3 . 191 Rectangular/Square Tin Plate container and/or component thereof with round neck. 3 . 192 Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece)
3 . 193 Deleted . . 194 Sanitary and bathroom fittings (of brass)
5 . 195 Sanitary and bathroom fittings (of gun metal)
5 . 196 Shovels/Spades made of Iron and/or steel, with or without handle, irrespective of what material the handle may have been made of
3 . 197 Folding bed made of mild steel
2 .

10 198 Sleeve made of Mild steel
4 . 199 Sleeve Bracket made of mild steel
4 . 200 Stainless Steel safety razor Blades
5 . 201 Stainless Steel Vacuum Flask
7 . 202 Stainless steel wire rope
7 . 203 Stapler
1 . 204 Steel Clamp (Galvanised) and ungalvanised-All types
3 . 205 Mild Steel pegs
3 . 206 Mild Steel Weld mesh
3 Rs.55/Kg. 207 Mild Steel Stranded wire
3 Rs.26/Kg. 208 Surgical blades other than made of High Carbon Steel 2 . 209 Surgical Blades made of High Carbon Steel
2 . 210 Table Pencil Sharpener made of plastics
7 . 211 Tension Band
4 . 212 Tiller Left Hand or Right Hand
2 . 213 Top and Bottom cover of Round Battery Jacket made from Tin plate
1 . 214 Tower Crane
11 . 215 Track Wheel
4 . 216 Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/Razor Box (1 Razor Handle + 5 twin blades in a magazine both packed in a plastic box)/ Razor Card(1 Razor Handle + 5 twin blades in a magazine
7 . 217 Twin type shaving system Razor/ Razor Handle
5 . 218 Mild steel U-Bolt
2 . 219 Deleted . . 220 Mild Steel Universal Bracket
3 . 221 Valve for LPG Cylinder, Hand wheel type, made of Brass
4 . 222 Water meters of outer casing made of brass.
4 . 223 M.S. Wire Wire Nails
2 . 224 Wood screws made of carbon steel self colour or plated
2 . 225 Zinc plated (Galvanised) conduit Hanger
2 .

11 226 Ball/ Roller /Thrust/ clutch release/ spherical plain Bearing 7 Rs.600/Kg. 227 Bench Grinder 6
2 . 228 Brazed Carbide Tools
9 . 229 Brazed Tools Carbide Tips
7 . 230 Pneumatic tool
7 . 231 Cutting Tools of High speed Steel (Cobalt Grade)
4 . 232 Cutting tools of High Speed Steel (Non- Cobalt Grade)
4 . 233 A Casing Pipes conforming to API Specifications 5CT or equivalent of OD 114mm to 508mm (4 to 20) made out of Seamless Steel Pipes
3 Rs.130/Kg. 233 B Casing Pipes confirming to API Specifications 5CT or equivalent of OD 114mm to 508 mm (4 to 20) made out of ERW Steel Pipes 3 Rs. 40/Kg. 233 C Tubing/Hollow Drill Rods/Coupling/Core Barrels and substitutes made out of Carbon Steel Seamless Tube/Pipe 3 Rs.130/Kg. 234 Drills/Reamers End Mills/ Broaches Milling cutters including Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade).
6 . 235 Drills/Reamers End Mills/ Breaches/Milling cutters including Threading Tools/ Taps of High speed (Cobalt Grade)
6 . 236 Pneumatic Riveting hammer
7 . 237 Resin bonded diamond wheels
4 . 238 Saws/ Segments made from high speed steel strips/ sheets
4 . 239 Front Engined Three Wheeler Drive away Chasis in CKD/SKD/ CBU condition
9 . 240 Rear Engined Auto Rikshaw in CKD/SKD/CBU condition
9 . 241 Scooter (in CKD/SKD/CBU condition)
9 . 242 Motor Cycle (in CKD/SKD/CBU condition) 9 . 243 Moped (in CKD/SKD/CBU condition)
9 . 244 Alternator Assembly
8 . 245 Non-alloy Steel Anchor Pin
3 . 246 Armature for Delcoremy type motor
7 . 247 Armature for Dynamo
7 .

12 248 Starter Motor Armature for Low Speed Vehicles
6 . 249 Automobile Tyre-Tube Valves
8 . 250 BB Axle
3 . 251 Brake shoe plate
3 . 252 Cam
8 . 253 Cam Shaft
3 . 254 CBH Flate for starter motor
9 . 255 Commutator
7 . 256 Cone Sleeve/Axle Stud sleeve
3 . 257 Connecting Rod
1 . 258 Cotter pin
3 . 259 Crank for chain wheel
3 . 260 Crank Shaft (for four wheelers)
2 . 261 Crank Shaft (for two wheelers)
2 . 262 Crank-shaft Forgings/ Connecting Rod Forgings
5 . 263 Deep Well Hand pump complete without connecting Rods with/ without spares & Tools
7 . 264 Deep well hand pump with 10 connecting rods.
7 . 265 Draw bars
3 . 266 Drive assembly for starter motor
7 . 267 End-Cap Assembly
6 . 268 Field Coil for Starter Motor
7 . 269 Flex Plate Assembly
2 . 270 Flywheel Starter Ring Gear
2 . 271 Front Axle beam/I-Beam
3 . 272 Front/rear axle shaft
3 . 273 Full Tension Sleeve
2 . 274 Deleted . . 274 A Galvanized Spokes other than for bi-cycles 4 . 274 B Galvanized spokes for bi-cycles 4 Rs.85/gross 275 Generator (Dynamo) Assembly
7 . 276 Half Collets for engine valves
2 . 277 Deleted . . 278 Steel Hub bolts
2 . 279 Steel Hub cone
2 . 280 Ignition Coil oil filled
8 . 281 Ignition Coil Resin Cost
8 .

13 282 Inlet exhaust valves
2 . 283 Integral Shaft Water Pump bearing for automotive applications
8 . 284 King pin made out of alloy steel 6 . 285 Laminated Leaf Springs/Springs 6 . 286 Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition 6 . 287 Machined trailer ball/hitch pin/linkage pin
3 . 288 Nozzles made of steel
2 . 289 Oil Bath Gear case
2 . 290 Piston Pin/ Gudgeon Pin
2 . 291 Push rod
2 . 292 Rear Axle Assembly for LCV/ HCV (Assembly/SKD)
5 . 293 Rocker Arm/ Rocker Shaft made of steel
7 . 294 Roller for auto break shoe
3 . 295 Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing. 5 . 296 Sleeve Shaft and Ball Joint
2 . 297 Slip Ring
5 . 298 Slip Stub Shaft
2 . 299 Solenoid Switch Pre-engaged type
6 . 300 Solenoid Switch Co-axial type
6 . 301 Spindles made of steel
2 . 302 Sprocket with central axle
2 . 303 Starter motor with maximum current upto 1100 Amps
6 . 304 Stator for alternator for Light Duty (12 Volts 60-95 Amps)
6 . 305 Submersible Water pump sets i.e. Pumps, Motors, Pump sets & Accessories thereof such as cable, control panels & pipes
6 . 306 Valve Tappets
2 . 307 Voltage Regulator
4 . 308 Aluminium Ingots
3 . 309 Aluminium Sow Ingots
3 . 310 Aluminium Wire Bar/ Rod
3 . 311 Brass Washers of all types
5 . 312 Brass Wood Screw
6 . 313 Calcined Alumina
7 .

14 314 Copper flats/ Sheets/ Strips
6 . 315 Copper Foils
6 . 316 Lead Antimony Wire 7 . 317 Phosphor Bronze fabric
7 . 318 Pressure die cast article made of zinc
8 Rs.60/Kg. 319 Tin Ingots
2 . 320 Valve Stems made of brass
4 . 321 Magnetic assemblies incorporating cast alloy permanent magnets e.g. pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/ door catches/ vee blocks bases/ hold fast
5 . 322 Galvanised/ungalvanised spikes for use as Railway Track material
3 . 323 Gear cutting tools of Cobalt bearing high speed steel 4 . 324 Industrial Diamond prods. Diamond Grinding wheels/ Diamond file and tools 4 . 325 Aluminium Pistons, in fully machined conditions 7 . 326 Ferro Chrome/ Charge Chrome
5 Rs.30.50/Kg 327 Ferro Manganese (Fe Mn)
5 Rs.30/Kg 328 Ferro Silicon (Fe Si)
5 Rs.49/Kg 329 Cold Rolled Galvanized Non-alloy Steel sheets/Hoops & Strips/ wide coils/ Circles(Plain/ Corrugated) 5 Rs.25.50/Kg 330 Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)
5 Rs.9/Kg 331 Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco 8 . 332 High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars
10 . 333 High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars
10 . 334 High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars
10 . 335 High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars
10 .

15 336 High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
9 Rs.64/Kg 337 High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
9 Rs.61/Kg 338 Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
9 Rs.14000/MT 339 Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars
9 Rs.33000/MT 340 Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars
9 Rs.21000/MT 341 Non Alloy Steel wire Coated/ Plated or otherwise
3 Rs.22/Kg. 342 Hot rolled Galvanised Non-Alloy Steel Sheets /Hoops and strips/W 3 Rs.22/Kg. 343 Non alloy Steel Ingot, Billets, Blooms and slabs
2 Rs.21/Kg. 344 Alloy Steel Wire coated, plated or otherwise. 8 Rs.35/Kg. 345 Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed Bars, Thermo mechanically treated reinforcing Bars), Angles, Shapes & Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers 2 Rs.22.50/Kg. 346 Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
9 Rs.21000/MT 347 Silico Manganese (Si Mn)
5 Rs.25/Kg. 348 Stainless Steel Wires
7 Rs.97/Kg. 349 CR Stainless Steel Sheets/ Hoops & Strips/ Wide Coils/Circles with/without annealing/skin passing
7 Rs.86/Kg. 350 Hot Rolled Non Alloy Steel Plates/Wide Coils/Sheets/Hoops & Strips (including skelp) 4 Rs.22/Kg. 351 Low Carbon Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% Carbon)
5 Rs.90/Kg. 352 Ferro Molybdenum (60-65% 5 Rs.975/Kg

16 Molybdenum) 353 Table, Kitchen and other household articles made of Stainless Steel with or without handle/lid /anti-skid Rubber gasket irrespective of what material the handle/lid may have been made of 10 Rs.135/Kg. 354 Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of
10 Rs.135/Kg. 355 Aluminium artware 6 . 356 Aluminium Circles/Slugs 7 . 357 11 KV, Indoor Vacuum circuit Breaker Panels 9 . 358 CRGO Transformer Lamination (Core Laminations) 9 Rs.40/Kg. 359 11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm. 11 . 360 Cast Iron Wheel 3 . 361 Cold Rolled painted/ coated High Tensile steel strapping 3 Rs.29/Kg. 362 Ferrous investment & Precision castings 2 . 363 Manhole Cover 3 . 364 Sanitary casting 3 . 365A Forged Steel ball made of mild steel/non- alloy steel
3 Rs.80/Kg.
365B Forged Steel ball made of alloy steel
9 Rs.100/Kg. 365C Forged steel ball made of stainless steel 9 Rs.175/Kg. 366 Thermostatic type bimetal/ trimetal strip of various grades 8 . 367 Cast Iron Weights 3 . 368 Cast Iron Vice 8 Rs.65/kg 369 Hacksaw Frame 3 . 370 Automatic Socks Knitting Machine (Mechanical) 10 . 371 Computerised Automatic Power Socks Knitting Machine 10 . 372 Hydraulic End Cap 2 . 373 Injection moulding machine parts: Deckel /Cover made of non Alloy Steel 2 . 374 Injection Piston 2 . 375 Plates Injection cylinder 2 .

17 376 Speed Frame Drafting System 5 . 377 Tail Stocks made of Steel 2 . 378 Textile Spindle upper part 7 . 379 Textile spindle with insert 7 . 380 Thrust housing made of Steel 2 . 381 Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/Billets/Slabs), Bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire rods etc)., Angles, Shapes & Sections (including Special Profiles), Plates, Hot Rolled Sheets/Hoops and Strips (including Skelp)/Wide Coils 6 Rs.28/Kg. 382 Alumina Carbon Bricks/ Shapes and/or Ramming Mass, Castables and Mortars 10 . 383 Alumina Carbon/ Slide Gate Plate Refractory and Attachments 10 . 384 Alumina Fused Cast Refractories 10 . 385 Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 9 14000/MT 386 Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron) 5 Rs.10/Kg. 387 Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non- Alloy/Alloy Steel (excluding Stainless Steel) Sheets/Hoops and Strips/Wide- Coils, including CRCA 4 Rs.26.50/Kg. 388 Iron Ore pellets (from Limonite Ore) 4 Rs.2.50/Kg. 389 Iron Ore Pellets. (from Haematite Ore) 4 Rs.2.50/Kg. 390 Stainless Steel Ingots, Semis (Blooms/Billets/Slabs) Bars and Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Chaannels, Special Profiles), Plates / HR Sheets/Hoops and Strips (including Skelp)/Wide Coil 7 Rs.53/Kg. 391 Pig Iron/Hot Metal
4 Rs.13/Kg. 392 Alumina Carbon Continuous Casting Refractories and/or Mortars 10 .

18 393 2" Bungs with or without Washer/Gasket 3 . 394 2" Flanges with or without Washer/Gasket 3 . 395 Bolt Axle made of mild Steel 2 . 396 Boulevard Clamp made of Steel 3 . 397 Box Girders for Bridges 2 . 398 Clevis 3 Rs.40/Kg. 399A Hoe Blade 2 . 399B Hoe Eye 2 . 400 Articles manufactured out of GP Sheets not elsewhere specified 2 Rs.30/Kg. 401 Articles manufactured out of Tin Plate prime quality not elsewhere specified 3 . 402 Postcap
4 . 403 Rectangular tops made of Electrolytic tin plate fitted with screw neck & handle and bottoms 3 . 404 Round tops/ ends (bottoms) of containers made of tin plate 3 . 405 Rubber Wheel made of mild steel 5 . 406 Mild Steel Scrool 4 . 407 Vertical Arm made of mild steel 4 Rs.25/Kg. 408 Y Arm Made of mild Steel 4 Rs.25/Kg. 409 Slitting cutters made of mild steel
1 . 410 Forged Crank Shaft 3 Rs.75/kg 411 Front Axle Beam Forging
3 Rs.70/kg 412 Forged Crank Shaft Fully Machined
3 Rs.185/kg 413 Front Axle Beam Fully Machined 3 . 414 MS Window, Doors, Ventilators, Grate, Grille, fabricated, frames and Components/ parts thereof 3 Rs.25/Kg. 415 Non Alloy Steel Flanges/ Couplings / Tees/ Elbows
2 . 416 Seamless Stainless Steel Tubes (Cold Finished) 3 Rs.250/Kg. 417 A Fully Threaded Rod made of non-alloy steel/ mild steel(Galvanised/Ungalvanised) 3 Rs.20/Kg. 417 B Fully Threaded Rod made of Alloy Steel including Stainless Steel 9 Rs.90/Kg. 418 PTFE Cables 8 . 419 Silica Bricks/Shapes For B.F Stoves 7 . 420 Silica Bricks/Shapes For Coke Ovens 7 .

19 421 Silica Mortar 1 . 422 Stainless steel flanges/ couplings / Tees/ Elbows 8 . 423 Bicycle Chains
1 . 424 Manganese Steel Cast Articles (Rough/machined) 7 . 425 Non Alloy Steel Castings Rough/Machined 5 . 426 Spheroidal Graphite/ Malleable/ Ductile Iron Castings (Rough/machined) 5 . 427 Copper Bonded Grounding Rods 3 . 428 Bearing Races 1 . 429 Carbon/Non Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise) 3 . 430 Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise) 8 Rs.55/Kg. 431 Fabricated Steel Hardware/ Structure/Articles not elsewhere specified Made out of MS HR/CR Plates Sheets/Strips/wide Coil of relevant grade type 2 . 432 Industrial Roller Chain / Motorcycles including Moped Chain/ Automotive Timing Chains ( all types including spares ) 2 . 433 Industrial Valves (cast or forged body) 2 . 434 MS Bucket Handles Duly Nickel Plated 2 . 435 Perforated Construction Stakes (Round/ Flat/ Square) 2 . 436 Printed Lug Cap With Internal Coating Lined With PVC Compound 2 . 437 Steel Hinges Bar Type 2 Rs.20/Kg. 438 Zinc Plated (Galvanised) Steel Lock Nuts
(Blanked/Punched) from H.R.Coil/ Sheet 4 Rs.150/Kg. 439 Automotive Water Pump 4 . 440 Clutch Cover Assembly 1 . 441 Clutch Plate/Disc Assembly/Driven plate 1 . 442 Spline Hubs for clutch plate 3 . 443 Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised 1 . 444 Tractor Parts Ratchet Jack Assembly 2 . 445 Brass Wire 7 .

20 446 Stainless Steel rough castings
8 . 447 Aluminium Foil Commercial Grade Embosed Cut of Shape, Performed Coated Printed for other Reinforcing Material 7 . 448 Aluminium Foil Paper backed 8 . 449 Aluminium Foil Plastic Coated/ Laminated 7 . 450 Aluminium Foil Synthetic Resin/ Lacquer Coated Printed 7 . 451 Aluminium Foil Synthetic Resin/ Lacquer Coated
7 . 452 9 KV 5 KVA Conventional Surge Arrester Distribution Type With Mounting Breenet And Insulators 9 . 453 Non-Alloy Ground/ Earthing Rods (Galvanised) 4 Rs.55/Kg. 454 Stainless Steel Cable Ties made of SS.316 Grade 1 . 455 Alloy Steel Castings (Rough/Machined) 5 . 456 Galvanised Steel Stranded Wire (Wire Strand) 3 . 457 Anchor Bolt With Nut 2 . 458 Ferro Vanadium
9 Rs.542/Kg. 459 Magnesium Ferro Silicon 8 Rs.25/Kg. 460 Cable Ties made of Stainless Steel
1 . 461 Pilfer proof caps/ Seals Plain/printed with EP Liner 8 . 462 Pole Line Hardware fittings and Accessories (Galvanised) 4 . 463 Carbon steel submerged arc welded pipes as per API grade or ASIM grade or equivalent or hot formed steel bends as per API, ASTM grade or equivalent degree: 0-180 degree 3 Rs.27000/MT 464 Cold rolled/formed ring for bearing races, CV cages 4 . 465 CRCA butt hinges 1 . 466 CRCA hinges electric brass plated 1 . 467 CRCA hinges self colour
1 . 468 CRCA hinges zinc plated 1 . 469 TEE Hinges (painted/ zinc plated) made of steel 2 . 470 Transformer (copper wound) above 100% KVA upto and including 400 KVA 3 6 .

21 phased, oil cooled. 471 Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled. 6 . 472 Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled. 6 . 473 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr. 4 Rs.34000/MT 474 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr. 4 Rs.34000/MT 475 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr. 4 Rs.34000/MT 476 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr. 4 Rs.34000/MT 477 Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter 8 . 478 Electric door bell 8 . 479 Steel tapes/rules (1 meter to 50 meters) 1 . 480 Ceramic coated steel pipes with or without coupling 4 . 481 Insulated cryogenic tanks for storage and transport of compressed and liquidified gases 3 . 482 Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB 5 . 483 Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5 2.5%, Carbon 1.5 2.5% balance Iron
5 . 484 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14 2 .

22 485 Thrust Washers in Steel backed Aluminium Tin Alloy GA-17G/A-17X 2 . 486 Thrust Washers in Steel backed Copper based Alloy GS-30/KS-30/F-14/SAE/ 48/SL 2 . 487 Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L- 200/G-24/SAE-15 2 . 488 based Alloy GS-10/Lok Sabha-10/g- 46/sae/797/SYF-100/F-59 2 . 489 Lead Alloy of GS-23/L.S-23/G-48/SAE- 799/SX/F-250/F-7 2 . 490 based Tin Alloy GS-25/KS-25/SAE-49/SP 2 . 491 based Alloy F-770/SL/ KS30/ GS30/F-14 2 . 492 based Alloy F-770/SL/KS30/ GS30/F-14 2 . 493 Deleted . . 494 Deleted . . 495 based F-820/F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A6/GA 6/A300/G73/SAE 770-780 2 . 496 Tin BASED ALLOY GA 6/ A6/G 73A 300/SAE 770/ AS11 2 . 497 Thrust Washers in Steel backed High Tin Alloy F-780/SP /H24/ GS25 /KS 25/G- 41/SAE-49
2 .

23 498 based AlloyF100/SY/HF2/ LS10 /gs10/Glyco-46/SAE/792 2 . 499 based Alloy F-250/SX/HF 16 orH-116/LS- 23/GS-23/ Glyco-48/SAE-792 2 . 500 based Alloy AS-15/F-820/F-157/GA-20/A- 20/G-74/TR-20/SAE-783 2 . 501 based Alloy AS-11/GA-6/A-6/G-73/A- 300/SAE-770 2 . 502 Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/ G-32/B- 100/SAE-12 2 . 503 Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L- 100/F-99/SAE-13 2 . 504 Tin Alloy F-820 or F-157/TR-20/GA-20/A- 20/G-74/SAE-783/AS-15/GA-17G/A-17X 2 . 505 Tin Alloy AL-6 2 . 506 Lead Alloy F-66/AL-6M 2 . 507 Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B- 100/SAE-12/L-2 2 . 508 Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/ GL-13/L- 100/F-99/SAE-13/GM-155 2 . 509 Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F- 2 .

24 770/G-41 510 Metallurgical coke . . 511 Chain wheel 2 . 512 Multispeed free wheel 2 . 513 Welded steel pipe fitting 2 . 514 Bronze impellers for inter stream/ Thrustream pumps all types 3 . 515 Taper roller bearing 5 . 516 Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever 1 . 517 Cast iron parts for sewing machine
namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft 1 . 518 Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for C.C. Rod, Shuttle Race top spring, O/S Rock shaft 2 Rs. 60/Kg. 519 Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover 1 . 520 Portable bag closure machine 3 . 521 Submersible pumps 11 . 522 Non alloy steel forged (machined) hammers upto 10 kgs piece wt. without handle or with handle made of steel /wood/ rubber gripped steel pipe. 2 . 523 Chain wheel and Crank set 2 . 524 Triple chain wheel and crank set 2 . 525 Multi Cylinder Fuel injection Pumps for 7 .

25 Diesel Engines 526 Single Phase Motor 3 . 527 Automotive Oil filters/fuel filter/Spin on filters/oil or fuel filter assembly/canister-lub oil filter/air filter 4 . 528 Aluminium Alloy Billets 2 . 529 Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. 3 Rs.105/kg 530 Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. 10 Rs.175/kg for Alloy steel and Rs.400/kg for Stainless steel 531 Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 3 Rs.25/Kg. 532 Identifiable ready to use machined parts/components made wholly or predominantly of Carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 5 Rs.45/kg 533 Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel(0ther than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 5 Rs.85/kg 534 Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process, not elsewhere specified. 8 Rs.125/kg 535 Brake Drums made of Alloy Cast Iron 4 . 536 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA. 5 .

26 537 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA. 5 . 538 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA. 5 . 539 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA. 5 . 540 Nut and Shaft Assembly for Automobile 4 . 541 Paper Punches 1 . 542 Truck & Trailer Wheels 3 . 543A (a) Carbon Steel Forged Flanges
3 . 543B Alloy Steel including Stainless Steel Forged Flanges 8 . 544 Electrode holder mainly made of copper or brass 5 . 545 Staples/ Staples in strips made of wholly galvanized steel wire 2 . 546 Disc Horn 9 . 547 Stainless Steel casseroles 3 . 548 Handle Bar Switch 9 . 549 Grip for Handle Bar 6 . 550 Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW 8 . 551 Rear Axle Housing Assembly for LCV/HCV 5 . 552 Constant Temperature Baths 4 . 553 Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/27 - 1000 pcs 5 . 554 Earth Moving Wheel having diameter not less than 25"
3 . 555 Sewing Machine Part - shuttle hook - Mild steel 2 . 556 Cold Rolled Alloy / Non Alloy Steel Hardened and Tempered Saw Blades 1 . 557 Electrical Wiring Accessories / Components made of Phosphors Bronze 7 . 558 Textile Machinery Spare Parts - Perforated Nickel Screen 1 . 559 PCB Routers 3 .

27 560 Electrolytic Tin Plate 3 Rs.35/Kg. 561 Plastic Extrusion Plant and Machinery 6 . 562 Automobile Locks other than Ignition Locks 6 Rs.700/Kg. 563A Automobile Ignition Locks for cars 10 Rs.3000/Kg. 563B Automobile Ignition Locks for two wheelers 9 Rs.525/Kg. 564 Aluminium Oxide Resin Disc 4 Rs.8/Piece 565 Endless coated Zircon Cloth Belts 9 Rs.330/Sq.Mtr. 566 Non-Cast Hardware Fittings made of Stainless Steel Rod, Grade 304 5 Rs.350/Kg. 567 FTL Caps 8 Rs.350/Kg. 568 Vitrified Grinding Wheel 5 . 569 PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 mm-6.5 mm 8 . 570 Hypodermic Needle Disposable 3 . 571 Spheroidal Graphite Quality/Steel quality Alloy IC quality/ICDP quality/High Chrome quality Rolls for Rolling Mills. 4 . 572 Watch Dials made out of Nickel Silver Brass Strip Published 11 Rs.47 / dial 573 Steel Cops/Pirn/Bobbins 4 Rs.56/Kg. 574 Hermetically Sealed Compressor for Air Conditioners using R-22 refrigerant gas 8 Rs.4000/ Piece 575 Agricultural Sprinkler mainly made of Brass 3 . 576 Earth Moving Wheel components, namely, Bead Seat Ring, Gutter Band Fixed Flange & Lock Ring 3 Rs.80/Kg. 577 Earth Moving Wheel Components, namely, Detachable Flange/Loose Flange Center Band Disc & Side Ring 2 . 578 Chrome/Nickel Plated wire wheel for all types of car 3 . 579 Shock Absorber 5 . 580 Power take offs/clutches 2 . 581 Shoulder Bolt made out of CHQ alloy steel / Stainless Steel 3 Rs.800/Kg. 582 Dowell Pin made out of CHQ steel alloy steel/Stainless Steel 6 Rs. 400/Kg. 583 Single Cylinder Pump for Diesel Engine 8 Rs.1150/Kg. 584 Nickel Screen 1 . 585 All Aliminium Alloy Conductor 9 .

28 586 Auto Parts Double Brake Chamber Type 24 L/S 3 Rs.750/No. 587 Auto Parts Brake Chamber Type-16 L/S, Type-20 L/S, Type 24 L/S, Type 30 L/S, Type 30 S/S 3 Rs.375/No. 588 adhoc Hermetically Sealed Compressor for Refrigerators & Commercial Refrigeration Applications using eco-friendly gases. 10 Rs. 1200/Pc. valid for 6 months from the date 4.2.04 applicable to M/s. Tecumseh
Products (I) Ltd., Ballabhgarh & M/s BPL Engineering Ltd, Hyderabad, only 589 Textile Machinery Continuous open with Chainless Mercerizing Machine 7 Rs.700000/No. 590 Zinc Concentrates 3 . 591 Tube Forming Rolls 3 . 592 Diffuser and parts thereof 5

593 adhoc Steering Gear Assembly 3% valid for 6 months from the date of PN59 and applicable to M/s Rajshi Udyog, ND only

594 Medium Commercial Vehicles GVW above 7.5MT and upto 12MT in CBU/SKD/CKD condition 11 Rs.5.71 lakhs per vehicle 595 Distributor Type Fuel Injection Pump 13 Rs.20, 000 / Piece 596 Stainless Steel Fabricated Tower Packings 6

597 Galvanized Pipes/Tubes of different wall thickness 5 Rs.35/Kg 598 Lead Concentrate 3 .

29 599 adhoc Vaporizer made of Aluminium 3.00 (Valid for 6 months from the date of issue of PN-3 dt.14.9.04 and will be applicable for the exports made by M/s Inox India Ltd, Vadodara) Rs.270/Kg 600 Zinc Ingot 9 . 601 Bearing/Gear Puller Made Of Non Alloy Steel Platter/Round With Chrome Plated Legs 3 Rs.70/kg 602 Auto Control Cable for Seat Applications 2 .

---