Amendments/additions/corrections in Standard Input output norms
/ADVANCE COPY/
(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY
PART-I-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 11 /2004-09
NEW DELHI : DATED : 01/10/2004
In exercise of the powers conferred under Paragraph 2.4 of the Foreign
Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the
Director
General
of
Foreign
Trade
hereby
makes
the
following
amendments/deletions/corrections and additions in the Handbook of Procedures,
Vol.2, 2002-2007, as amended.
2.
In the statement of Standard Input Output Norms as contained in the
Handbook of Procedures, (Vol.2) 2002-2007, as amended, amendments/
corrections/ deletion at appropriate places as mentioned in Annexure "A to this
Public Notice shall be made.
3
In the statement of Standard Input Output Norms, following additions shall
be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-3388, new entries at Sl. No.
A-3389 to A-4021 shall be added as per Annexure B to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1985, new entries at Sl. No. C-1986 to
C-1994 shall be added as per Annexure C to this Public Notice.
PLASTICS PRODUCTS
After the existing entry at Sl.No.H-545, new entry at Sl.No.H-546 shall be
added as per Annexure D to this Public Notice.
This issues in public interest.
Sd/-
( K. T. CHACKO )
DIRECTOR GENERAL OF FOREIGN TRADE
(S.B.S.REDDY)
Jt. DIRECTOR GENERAL OF FOREIGN TRADE
(F.No.01/87/171/00002/AM04/DES-VIII)
-:3:-
Annexure A to the
Public Notice No. 11
Dated: 01/10/2004
AMENDMENTS/CORRECTIONS
Sl.
No.
Page
No.
Reference
Amendments/Corrections
1
2
3
4
1.
130
Chemical
&
Allied
Product
Sl.No.A-956 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A956
Sulphur
Black
1
(Sulphur
Black
OG/Sulphur
Black
OG
Grains)
(Dye
content 86%)
1 kg
-
Benzene
-
Caustic Soda Flakes
-
Soda Ash
-
Sulphur
-
Sodium Sulphide Flakes 0.383 kg 0.951 kg 0.061 kg 0.910 kg 0.295 kg
167
Chemical
&
Allied
Product
Sl.No.A-1365
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A1365
Hydroxylamine
Sulphate
1 kg
- Soda Ash
- Ammonia
- Catalyst (Platnium)
- Caustic Soda Flakes OR
- Sulphur
- Ammonia
- Catalyst(Platnium)
- Caustic Soda Flakes
- Furnace Oil
1.80 Kg
0.315 Kg
0.147 mg
0.75 Kg
0.70 Kg 0.315 Kg 0.147 mg 2.05 Kg 0.80 ltr
-:4:-
3.
4
Chemical
&
Allied
Product
Sl.No.A1379
(Notified vide Public
Notice No.77
Dated:26/08/2004)
The norm covered by this entry stands
deleted.
231
Chemical
&
Allied
Product
Sl.No.A1802
The foot note below this entry is added:-
Note: In case of Zinc Sleeve Ball Pin
Insulator, Zinc Ingots allowed at
the rate of 1.05 kg/kg content of
Zinc Sleeve in Export
4
Chemical
&
Allied
Product
Sl.No.A2156
(notified vide Public
Notice No.77
Dated:26/08/2004)
The norm covered by this entry stands
deleted.
346
346Chemical & Allied
Product
Sl.No.A2730
After the description of import item at Sl.
No. 2, the following input item (with
quantity) is amended to read as under:-
3. Ortho Di-Chloro Benzene - 0.728 kg
5
Chemical
&
Allied
Product
Sl.No.A2843
(amended vide Public
Notice No.10
Dated:30/05/2003)
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A2843
Offset Printing Ink
Black (Pigment content 18+/-1% and Solid Resin 47+/-1% (Flush Route) 1 kg
- Flush Black base for Printing Ink ( 46 +/- 1% Carbon Black and 41+/- 1% Solid Resin) 0.4120 kg
-:5:-
2. Printing Ink Vehicle
Gel
(Solid
content
59+/-1%) Linseed Oil
base OR Soyabean
Oil Base)
3. Printing Ink Vehicle
Plain (Solid Content
61+/-1%) Linseed Oil
Base Or Soyabean Oil
Base
0.2575 kg
0.2575 kg
- Polyethylene Wax Compound containing 43%+/-1% Polyethylene wax 28+/-1%, Tung Oil 28+/-1% Refined Linseed Oil
- PTFE wax compound containing 61%+/-1% PTFE wax, 33% +/- 1% Refined Linseed Oil
- Cobalt Magnesium Combined Drier (metal content 12% +/-1% 0.2%)
- Petroleum Distillate
(Distillation Range 240-330 Degree C) 0.0310 kg
0.0020 kg
0.0103 kg
0.0597 kg
-:6:-
8.
6-7
Chemical
&
Allied
Product
Sl.No.A2844
Notice No.10
Dated:30/05/2003)
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A2844
Offset Printing Ink
Magenta/Rubine
(Pigment content 15
+/- 1% and Solid
Resin 43+/1% (Flush
Route)
1 kg
-
Flush Magenta /Rubine
base for Printing Ink ( 37 +/- 1% Pigment and 33+/- 1% Solid Resin) -
Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.4120 kg
0.2575 kg -
Printing Ink Vehicle
Plain (Solid Content
61+/-1%) Linseed Oil
Base Or Soyabean Oil
Base
4. Polyethylene
Wax
Compound containing
43%+/-1%
Polyethylene
wax
28+/-1%, Tung Oil
and 28+/-1% Refined
Linseed Oil
5. PTFE wax compound
containing 61%+/-1%
PTFE wax, 33% +/-
1% Refined Linseed
Oil
6. Cobalt
Magnesium
Combined
Drier
(metal content 12%
+/-1% 0.2%)
7. Petroleum
Distillate
(Distillation
Range
240-330 Degree C)
0.2575 kg
0.0310 kg
0.0020 kg
0.0103 kg
0.0597 kg
-:7:-
9.
7-8
Chemical
&
Allied
Product
Sl.No.A2891
Notice No.10
Dated:30/05/2003)
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A2891
Offset Printing Ink
Yellow
(Pigment
content 14 +/- 1%
and Solid Resin 43+/-
1% (Flush Route)
1 kg
- Flush Yellow
for Printing Ink ( 35 +/- 1% Carbon Black and 32+/- 1% Solid Resin) - Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base)
- Printing Ink Vehicle
Plain (Solid Content
61+/-1%) Linseed Oil
Base Or Soyabean Oil
Base
4. Polyethylene
Wax
Compound containing
43%+/-1%
Polyethylene
wax
28+/-1%, Tung Oil
28+/-1%
Refined
Linseed Oil
5. PTFE wax compound
containing 61%+/-1%
PTFE wax, 33% +/-
1% Refined Linseed
Oil
6. Cobalt
Magnesium
Combined
Drier
(metal content 12%
+/-1% 0.2%)
7. Petroleum
Distillate
(Distillation
Range
240-330 Degree C)
0.4120 kg
0.2575 kg
0.2575 kg
0.0310 kg
0.0020 kg
0.0103 kg
0.0597 kg
-:8:-
10.
20
Chemical
&
Allied
Product
Sl.No.A3161
Notice No.03
Dated:31/03/2003)
The description of export item is amended
to read as under:-
Perfumed Candles in Terracotta Pot/Glass
container of different shapes and sizes
20
Chemical
&
Allied
Product
Sl.No.A3253
Notice No.27
Dated:06/10/2003)
The quantity of import item at Sl. No. 1, is
amended to read as under:-
0.790 kg
43
Chemical
&
Allied
Product
Sl.No.A3340
Notice No.70
Dated:29/06/2004)
-
The description of import item at Sl. No. 5, (without any change in quantity) is corrected to read as under:-
Slyvablend FA 7002 / Dimer Acid -
The description of import item at Sl. No. 11, (without any change in quantity) shall be corrected to read as under:- Nonyl Phenol
48
Chemical
&
Allied
Product
Sl.No.A3352
Notice No.70
Dated:29/06/2004)
In the description of import item at Sl.
No.1, the word HBR is corrected to read
as:-
NBR
52
Chemical
&
Allied
Product
Sl.No.A3362
Notice No.70
Dated:29/06/2004)
In the description of export item, the word
Petroleum is corrected to read as:-
Petrolatum
-:9:-
15.
11
Chemical
&
Allied
Product
Sl.No.A3381
(notified vide Public
Notice No.77
Dated:26/08/2004)
The norm covered by this entry stands
deleted.
12
Chemical
&
Allied
Product
Sl.No.A3386
(notified vide Public
Notice No.77
Dated:26/08/2004)
The description of export item is corrected
to read as under:-
Liquid Paraffin / White Oil Heavy/
Mineral Oil Heavy BP/USP (Other than
covered in SION No. A-3385
12
Chemical
&
Allied
Product
Sl.No.A3388
(notified vide Public
Notice No.77
Dated:26/08/2004)
The description of export item is corrected
to read as under:-
Liquid Paraffin / White Oil Heavy/
Mineral Oil Heavy (Other than covered in
SION No. A-3387
1
Chemical & Allied
Product
Sl.Nos. (Notified vide Public Notice No.77 Dated:26.08.2004) On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries stands corrected to read as under:- After the existing entries at Sl. No. A3378, New Entries At. Sl. No. A-3379 to A3388 are added as per Annexure B to this Public Notice
6 Engineering Product
Sl.No.C446
(Notified vide Public
Notice No. 50
Dated:16/02/2004)
In the description of export item the word
and allied equipment stands deleted.
-:10:-
20.
8
Engineering Product
Sl.No.C985
Notice No. 46
Dated:06/11/2002)
The norm covered by this entry shall be
Sl.No.
Export Item
Qty.
Import Item
Qty. Allowed
C985
Automotive
Radiators made of
Copper & Brass
1 kg
-
Copper Foils
-
Brass foils/tubes OR (a) Copper Cathode/ Wire bar / ingot/Rod (b) Zinc Ingot
-
Brass Sheet OR (a) Copper Cathode/ Wire bar/ Rod (b) Zinc Ingot
-
(a) Tin Ingot (b) Lead Ingot
-
Terene Sheet or CRCA Sheet/ Coil/ Strips
-
Flux
0.22 Kg 0.22 kg
0.162 kg
0.07 kg 0.31 kg
0.228 kg
0.098 kg 0.070 kg 0.074 kg 0.22 kg
1% of the FOB value -
23-24 Engineering Product
Sl.No.C1058
(Amended vide Public
Notice No.67
Dated:01.02.2002 &
Amended vide Public
Notice No. 03
Dated:31.03.2003)
The description of import item at Sl. No.
1(c), (without any change in quantity) is
amended to read as under:-
Lead
Calcium
Alloy
containing
Calcium between 0.035% to 0.16% and
Tin upto 1.7%
-:11:-
22.
6
Engineering Product
Sl.No.C1392
(Amended vide Public
Notice No.35
Dated:05.12.2003)
After the description of import item at Sl.
No. 4, the following additional import
item (with quantity) is added:-
5.Steel Armouring Wire - 1.02 kg/kg
content in
export
product
803 Engineering Product
Sl.No.C1504 The description of import item at Sl. No. 1, (without any change in quantity) is amended to read as under:- Hot Rolled Silicon Electrical Steel Wide Coils of relevant grade containing 0.60% to 3.4% Silicon with varying quantity of Aluminium
43 Engineering Product
Sl.No.C1823
(Amended vide Public
Notice No.44
Dated:18/10/2002)
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
C1823 Hydraulic Excavator
1 No.
- Control Valve
- Swing bearing
- Pilot Valve
- FC Valve
- Seal Group
- Pump
- T R chain 1 No. 1 No. 3 Nos. 1 No. 2 Nos. 1 No. 2 Nos.
-:12:-
8. Other Relevant
Component
9. Liquid adhesive
10. Calking
11. Sealant
12. Welding Wire
13. Steel Tube
14. CDS Tube
15. Hose
16. Steel Plate of relevant
grade.
As per GN4.
The
quantity
of import item
No.9
to
11
may
be
allowed
within 1% of
FOB value.
2%
of
the
weight
of
Steel
to
be
welded.
1 Mtr./Mtr.
content in
export
product.
1 Mtr./Mtr.
content in
export
product.
1 Mtr./ Mtr.
content in
export
product.
1.1
Kg./Kg.
content
in
export
product.
18 Engineering Product
Sl.No.C1862
Notice No.61
Dated:03.02.2003)
The quantity of export item is corrected to
read as under:-
1 kg instead of 2 kg
-:13:-
26.
18
Engineering Product
Sl.No.C1955
(Notified vide Public
Notice No.58
Dated:12.04.2004)
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
C1955 Cupro Nickel Tubes
1 kg
-
Cupro Nickel Scrap of relevant grade
1.09 Kg.
20 Engineering Product
Sl.No.C1959
Notice No.58
Dated:12/04/2004)
The description of export item is
amended to read as under:-
Pressure
Die
Cast/Sand
Cast
Components
/
Articles
made
of
Aluminum Alloy
2 Engineering Product
Sl.Nos. (Notified vide
Public Notice No. 77
Dated: 26.08.2004)
On page No.2 of the said Public Notice
the numbering of the Standard Input
Output Norms entries stands corrected to
read as under:-
After the existing entry at Sl. No. C-
1975, New entries at Sl. No. C1976 to
C1985 are added as per Annexure C to
this Public Notice
961 - 962 Plastics Product
Sl.No.H-5
Sl.No.
Export Item
Qty.
Import Item
Qty. Allowed
H-5
ABS
Resin
/
Granules (Injection
Moulding
/
Sheeting Grade)
1 MT
- Styrene
- Aqcrylonitrile
- Butadiene
- Oleic Acid or Distilled Fatty Acid
- Teritary Dodecyl Mercaptan/ Normal Dodecyl Mercaptan
- Potassium
Persulphate
639 kg
271 kg
190 kg
21 kg
7 kg
5 kg
-:14:-
7. Disprosin / Rosin
8. Ethylene
Bis-
stearamide
9. Antioxidant
(OBP/Sumilizer/
DTDTDP/DBP/
TNPP/BHT/ Irgonox-
1076
10. Pigment/
Titanium
Dioxide/Relevant
Colour Master Batch
11. Stearic Acid
12. Palmitic Acid
25 kg
25 kg
31 kg
20 kg
3 kg
2 kg
Note : 1. The import of item Nos. 11&12 may be allowed for the export of ABS
Resin (Sheetings grade) and item No. 10 may be reduced to 15 kgs
instead of 20 kg per ton export.
Note : 2. For the export of ABS Resin/Granules (Injection Moulding Grade) item
No. 11 & 12 may not be allowed for import.
1007
1008 Plastics Product
Sl.No.H-268
The description of export item is
amended to read as under:-
Drop Cloth made of PVC Leather Cloth
/ PVC Leather Cloth / Foam Leather
Cloth, Single sided / Both sided (PVC
Tarpaulin) having coating weight 1000
gms per Sq.Meter +/-5%
1025 Plastics Product
Sl.No.H-348
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
H-348 White
Opaque
LLDPE
Lamination
Grade Film
1 kg
- LLDPE
Granules
(Film Grade)
OR - LLDPE Granules (Film Grade)
- White Master Batch
1.05 kg
0.966 kgs
0.084 kgs
-:15:-
32.
1030
1031 Plastics Product
Sl.No.H-383
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
H-383 Multi
Layer
Co-
Extruded
Plastic
Packaging
Material
(Printed /Unprinted )
1 kg
-
LDPE Granules (Film Grade)
-
LLDPE Granules (Film Grade)
-
Ethylene Acrylic Acid Co-polymer Granules
-
Liquid Printing Ink 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 0.01 kg Note: 1. In case of export of coloured items, Relevant Colour Master Batch shall also be allowed as an additional input at 0.02 kg/kg and the weight of Polymers at Sr. No. 1,2 and 3 above may be reduced to 1.03 kg/kg contained in the export product. Note: 2. The Liquid Printing Ink may be allowed in case of printed export product.
1031 Plastics Product
Sl.No.H-391
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
H-391 Plastic Hangers
1 kg
- Relevant Plastic Moulding Powder/ Granules i.e. PP/HIPS/ ABS
- (A) Non Alloy CRCA
Sheet/Slip for metal
Clips
OR
Relevant Metal Clips - Non-Alloy Steel Wire
1.05
kg/kg
content in the
export product
1.05 kg/kg content of metal clips contained in the export product Net
2% wastage 1.01 kg/kg content in the export product
-:16:-
34.
2
Textile Product
Sl.Nos. (Notified vide
Public Notice No. 77
Dated: 26.08.2004)
On page No. 2 of the said Public Notice
the numbering of the Standard Input
Output Norms entries stands corrected to
read as under:-
After the existing entry at Sl. No. J-361
New entry at Sl. No. J-362 is added as per
Annexure D to this Public Notice
1132 Miscellaneous Product
Sl.No.K-77
The norm covered by this entry stands
deleted.
-:17:-
Annexure B to the
Public Notice No. 11
Dated: 01/10/2004
CHEMICALS AND ALLIED PRODUCTS
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
A3389
Oil soluble Phenolic
resin based varnish
(high
viscosity)
(solid resin content
Min. 55.7% + 2%)
1.00000
kg
- Glycerine
- Tertiary butyl catechol
- Tri phenyl Phosphite
- Light Magnesium oxide
- Bis phenol-A
- Butylated hydroxy toluene
- Para tertiary butyl phenol
- Nomelt -2- 1200/ high melting grease
- Slyvablend FA 7002/dimmer acid
- Trimethylol propane
- Oxy aluminium octoate ( OAO)
- Iso phthalic acid
- Para formaldehyde
- Neodene
- Fumeric acid
- Penta erythritol
- Texanol iso butyrate
- Refined linseed
Oil
0.00005kg
0.00010kg
0.00012kg
0.00012 kg
0.00220kg 0.00407 kg
0.00463 kg
0.00490kg
0.00572kg
0.00651kg
0.01523 kg
0.1949 kg 0.02355kg
0.02387 kg 0.03550 kg 0.03676 kg 0.08230 kg
0.08596 kg
-:18:-
19. Nonyl phenol
20. Rosin namely gum
rosin / tall oil rosin
21. Dicyclo pentadiene
22. Petroleum distillate
(distillation range:
240-330
degree
centigrade)
0.13750 kg
0.17020 kg
0.18043 kg
0.33202 kg
A3390
Sodium
salt
of
Trichloro Pyridinol
(purity 100% basis)
1 kg
- Trichloro acetyl chloride
- Acrylonitrile
- Ethylene dichloride
- Caustic soda lye
- Solvent C-9
1.068 kg
0.396 kg 0.096kg 0.848kg 0.012kg A3391 Calcium Gluconate Monohydrate 1 kg - Dextrose Monohydrate 1.017 kg A3392 2,6 Dimethyoxy Phenol 1 kg
- Gallic Acid 1.628 kg A3393 Gatifloxsacin Hemihydrate 1 kg
- 2,4,5 Trifluoro-3- Methoxy Benzoic Acid
- 2- Methyl Piprazine
- Actonitrile
- Cyclopropylraxine
- Dimethyl Formamide
- Dimethyl Sulfoxide
- Potassium carbonate
- Toluene
1.21 Kg./Kg.
0.39 Kg./Kg.
1.0 Kg./Kg. 0.18 Kg./Kg. 0.77 Kg./Kg. 1.0 Kg./Kg. 0.98 Kg./Kg.
3.00 Kg./Kg.
-:19:-
A3394
Lavofloxacin
Hemihydrate
1 kg
- 2,3,4,5 Tetrafluoro Benzoic Acid
- Dimethyl Sulphoxide
- Dimethyl Formamide
- Methylene
Chloride - S(+)-2-Amino Propanol
- 2,
Methyl
Piperazine
1.87 Kg.
2.07 Kg.
3.60 Kg.
1.50 Kg.
0.72 Kg
0.45 Kg. A3395 Celecoxib 1 kg - Trifluoro Acetic Acid
- Sodium Methoxide
- Methanol
- Dimethyl
Formamide
0.62 Kg.
0.30 Kg. 1.77 Kg. 1.77 Kg. A3396 N-(1-Oxopenthyl)-N (2-H-Tetrazol-5-YL) (1-1Biphenyl)-4- YL)-L-Valine 1 kg - 2-Cyano-4-Methyl Biphenyl
- L-Valine
- Valaeric Acid
- Dimethyl Formamide
- Isopropyl Ether
- Methylene
Chloride
1.94 Kg.
0.89 Kg. 0.58 Kg. 1.20 Kg.
7.94 Kg. 7.33 Kg. A3397 Methyl Gallate 1 kg - Gallic Acid
1.026 kg
A3398 Mirtazepine 1 kg - Thionyl Chloride
- Methylene Chloride
- Benzyl Chloride
- Dimethyl Formamide
- Sodium
Bis
(2-
Methoxy
Ethoxy
Aluminium
Hydride) (Vitride/
Synhydride)
3.76 kg. 8.50 kg
1.62 kg. 4.50 kg.
4.90 kg.
-:20:-
6. 5% Palladium on
Carbon
7. 2-Chloro Nicotino
Nitrile
8. Tetrahydrofuran
0.100 kg.
1.29 kg.
6.50 kg.
A3399
Ornidazole
1 kg
- 2-Methyl-5-Nitro Imidazole
- Epichlorohydrin
- Methyline Chloride
1.45 Kg.
4.80 Kg. 1.55 Kg. A4000 Flush in various colours for Printing
Ink (35+/-1% Pigment and 32+/- 1% Solid Resin) other than Black, Cyan, Magenta & Yellow) 1 kg - Relevant Pigment
- Printing Ink Vehicle Plain (Solid content 61+/-2%) (linseed Oil base or Soya bean oil base)
- Alkyd resin namely soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil base alkyd resin (long oil length) having solid content 100%
- Petroleum Distillate (Distillation range 240-330 Degree C
- Oleyl Alcohol
- Anti Oxidant, namely BHT and MEHQ
- Texanol
Isobutyrate
0.36 kg
0.34 kg
0.012 kg
0.13 kg
0.03 kg 0.01 kg
0.03 kg
-:21:-
A4001
Copper & Lead
Free Mirror on
Float Glass
1M.T.
(not less
than 100
sq.
meter)
-
Clear Glass
OR
1(a) Silica Sand
1(b) Soda Ash (Sodium
Carbonate Dense)
1(c) Dolomite
1(d) Calcite (Calcium
Carbonate)
1(e) Sodium Sulphate
1(f) Furnace Oil
1(g) PMMA Base
Interlevant Powder
2. Mirror Back Paint
Top Coat Lead Free
(70% Solid Content)
3. Mirror Back Paint
Premier Lead Free
(50% Solid Content)
4. Xylene
5. Silver
Nitrate
Solution (25% w/v
Silver Nitrate)
6. Palladium
Chloride
Solution
(50
Grams/Litre)
7. Reducer
Solution
consisting of Sodium
Hydroxide
and
Sodium Gluconate
8. Silane
Solution
containing
Amino
Propyl
Triethoxy
Silane
9. Tin
Chloride
Solution (1.2 grams/
litre)
1.05 MT (not
more
than
105
Sq.
meter)
828.45 kg
249.90 kg
197.40 kg
79.275 kg
9.45 kg
246.75 kg
0.0492 kg
9.258 kg
9.151 kg
2.497 kg
0.7903 Litres
0.01615Litres
0.7637 Litres
0.0727 Litres
0.01055Litres
-:22:-
10. Pine Wood
11. High Tensile Steel
Strap Cold Rolled
Painted
/
Wax
Coated
12. Seal for Steel Strap
13. Polyester
Ratchet
Assembly (Tie Down
with
J
Hook
on
Ratchet
Buckle
Fixed
14. Unit
Clay
Tyvek/
Bentonite
15. Cargo Dry
As
per
Packing
Policy
-
Do
-
Do -
-
Do -
-
Do -
-
Do - A4002 Pearl Essence Pigment (Titanium Oxide : Tio2 content =28% ) 1 Kg
- Titanium Oxychloride (asTio2 =25%)
- Caustic Soda
1.287 Kg
0.930 Kg A4003 Non tracking Coated Skirts/ Breakout for Cable Jointings 1 kg - Ethylene Co- polymer based Polymeric Compound (Type DC 1032)
- Butyl Rubber based
Coating compound
1.10 kg/kg content in the export product
Net to Net A4004 Polypropylene Multifilament Yarn (with 2% U.V. Stabilizer)
100 kg - Polypropylene Chips/ Granules/ Resins
- Master Batch Polypropylene Dyed/ Relevant Colour Master Batches
- U.V. Stabiliser
- Spin Finish Oil
104.0 kg
4.15 kg
2.00 kg 2.33 kg
-:23:-
A4005
3 -Chloropropiophe-
none
1 kg
- Propiophenone
1.39 kg/kg
A4006 Piperazine Di Hydrochloride
1 kg - Piperazine Water Solution (on 100% basis) 0.540 kg A4007 Hydrotreating
Cum
Desulphurisation Catalyst Type: G1 Catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% 1 kg
-
Zinc Metal
-
Molybdenum Trioxide
0.694 kg 0.035 kg A4008 (-) Menthyl Trans- 4(4-Fluorophenyl)- N- Methyl Nipecotinate Hydrobromide 1 kg -
Potassium Tertiary Butoxide
-
Sodium Boro Hydride
-
Para Amino Fluoro Benzene
-
Tetra Hydro Furan
-
Di Butyl Ether
1.10 kg/kg
1.40 kg/kg
2.57 kg/kg
8.25 kg/kg 3.66 kg/kg A4009 Articles made of Polyphenylene Oxide such as mounting Plate containing metallic foil and Banana Plug 1 kg -
Polyphenylene Oxide
-
Metallic Foil
-
Banana Plug
1.05 kg/kg of net content in the export product On net to net basis with accountabilit y of its use in the export
On net to net basis with accountabilit y of its use in the export
-:24:-
A4010
Fortified Gum Rosin
Dispersion
containing
60%
Rosin
1 kg
- Rosin
0.600 kgs A4011 Automobile Exhaust Catalyst Honey comb type EC 800 sizes 81.28 mm x 144.78 mm x 75.3 mm length containing Palladium content : 0.210 gm Rhodium content : 0.210 gm Cerium Oxide content : 10.6 gm and Clay Washcoat Powder : 52 gm 1 No. - Relevant Ceramic Honeycomb Subtract (Size 81.28 mm x 144.78 mm x 75.3 mm length)
- Palladium as Palladium Chloride
- Rhodium as Rhodium Nitrate Solution
- Collodial Cerium Acetate
- Clay
Wash
coat
Powder
1 No.
0.210 gm
0.042 gm
0.054 kg
0.052 kg A4012 Automobile Exhaust Catalyst Honey comb type EC 1500 M size 132.08 mm x 78 mm Length
containing : Platinum content : 0.251 gm Cerium Oxide content : 14.32 gm and Zirconium Oxide 19.67 gm 1 No. - Metallic Honeycomb Subtract (Size 132.08 mm dia x 78 length)
- Platinum as Platinum Sulphite Acid Solution
- Collodial Cerium Acetate
- Zirconium Colladial
- Zirconium Oxide Powder
- Washed
Silica
Powder
1 No.
0.251 gm
0.055 kg
0.020 kg 0.019 kg
0.032 kg A4013 Hydro treating cum Desulphurisation catalyst Type : G-1 Catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% 1 kg - Zinc Metal
- Molybdenum Trioxide 0.694 kg 0.035 kg
-:25:-
A4014
G-117
Catalyst
Shape = Rib rings
containing Ni-O 8%
min.
1 kg
- Nickel Metal
- Special grade Alumina Powder
- Magnesium Oxide
- Tylose
(Methyl
Hydroxy
Ethyl
Cellulose)
0.625 kg
0.033 kg
0.822 kg 0.030 kg A4015 Pigment Red 108 (Cadmium Red Pigmetn C.I.No. 77202 Cadmium content : 54+/-2% Selenium content : 14+/-2% 1 kg - Cadmium Metal
- Selenium Metal
- Barium Sulphate
0.621 kg
0.161 kg
0.160 kg
A4016
Sulphur
Powder/
Roll
1 kg - Sulphur Crude
1.025 kg/kg A4017 Leather Chemical Disodium Salt of Sulphonated containing C18 Fatty Acid 65+2% Alkyl Benzene Sulphonate 3% Heavy Alkyl 6.5% Oxo Alcohol 2.8% Chlorparaffin 4.5% 1 kg - C18 Fatty Acid (Oleic Acid, 63% Minimum)
- Alkyl Benzene Sulphonate
- Heavy Alkyl
- Oxo Alcohol
- Chloroparaffin
0.458 kg
0.03 kg
0.065 kg 0.028 kg 0.045 kg A4018 Prepared Adhesive based on Plastics (Two component Laminating Adhesives) Adhesive (Polyurethane Resin containing 100% Resin 1 kg - Adipic Acid
- Diethylene Glycol
- Mono Ethylene Glycol
- Methyl Propane Diol
- Diphenyl
Methane
4,4, Diisocynate
0.221 kg
0.107 kg
0.010 kg
0.100 kg 0.623 kg
-:26:-
A4019
Prepared
Adhesive
based
on
Plastics
(Two
component
Laminating
Adhesives)
Additive (Polyester
Resin
containing
100% Resin
1 kg
- Adipic Acid
- Diethylene Glycol
- Mono Ethylene Glycol
- Methyl Propane Diol
0.587 kg
0.284 kg
0.025 kg
0.264 kg A4020 2,6, Dinitro-4-terito Butyl Chlorobenzene 1 kg - Para Tertiary Butyl Chlorobenzene (purity 97% min.)
- Iso Propyl Alcohol
0.840 kg
0.461 kg A4021 Di (2-Ethythexyl) Peroxy Di Carbonate 50% Purity 1 kg - 2-Ethylhexyl Chloroformate
- Dequest
2060
S
(Diethylenetriaminep
enta)
(Methylene
Phosphonic)
Acid,
Aqueous Solution
0.587 kg
0.0005 kg
-:27:-
Annexure C to the
Public Notice No. 11
Dated: 01/10/2004
ENGINEERING PRODUCTS
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
C1986 Reducing Bushings
of mild steel for
rigid/IMC conduit
1 kg
- Mild Steel Round Bars
- Zinc (If export product is galvanised) As per Table given in the foot note. 0.8% of weight of export product Note: The quantity of import of Mild Steel Round Bars to be allowed as under:-
S.No. Size of export product Raw material in Kg to be allowed for 1 Kg of export product (a) (b) (c) 1
¾ X ½ X 9/16 L
4.00
2
1 X ½ X 5/8 L 2.10 3
1 X ¾ X 5/8 L 3.75 4
1 ¼ X ½ X ¾ L 1.80 5
1 ¼ X ¾ X ¾ L 2.35 6
1 ¼ X 1 X ¾ L 2.90 7
1 ½ X ½ X ¾ L 1.70 8
1 ½ X ¾ X ¾ L 1.80 9
1 ½ X 1 X ¾ L 2.50 10
1 ½ X 1 ¼ X ¾ L 5.00 11
2 X ½ X 7/8 L 1.50 12
2 X ¾ X 7/8 L 1.65 13
2 X 1 X 7/8 L 1.95 14
2 X 1 ¼ X 7/8 L 2.65 15
2 X 1 ½ X 7/8 L
3.70
C1987 Online Regulator for LPG Applications 1 No.
- Zinc Ingot 1.10 Kg/Kg content in the export product
-:28:-
C1988 Integrated Regulator
for
LPG
Applications
1 No.
- Zinc Ingot
- Brass Scrap
- Pressure Gauge
- O-ring
- QCC
Type
I
Connector
1.10
Kg/Kg
content in the
export product
1.075
Kg/Kg
content in the
export product
Net to Net
Net to Net Net to Net C1989 Brass Retrofit Adaptor for LPG Applications 1 No. - Brass Scrap
- Pressure Gauge
- O-Ring
- QCC Type I Connector 1.075 Kg/Kg content in the export product Net to Net Net to Net Net to Net C1990 Brass OEM Adaptor for LPG Applications 1 No.
- Brass Scrap
- Pressure Gauge
- O-Ring
- QCC Type I Connector 1.075 Kg/Kg content in the export product Net to Net Net to Net Net to Net C1991 Compact Regulator for LPG Applications 1 No.
- Zinc Ingot
- Brass scrap
- Pressure Gauge
- O-Ring 1.10 Kg/Kg content in the export product 1.075 Kg/Kg content in the export product Net to Net Net to Net C1992 Screw Type Regulator for LPG Applications 1 No.
- Zinc Ingot
- Brass Scrap
- Pressure Gauge
- O-Ring 1.10 Kg/Kg content in the export product 1.075 Kg/Kg content in the export product Net to Net Net to Net
-:29:-
C1993 Brass Cages for Ball
and Roller Bearings
1 kg
- Brass Scrap 1.22 Kg./Kg. content in export product C1994 Electrolytic Iron Powder (Food grade) having purity of 99.5% and above 1 kg
- M.S. Plate 1.80 Kg.
-:30:-
Annexure D to the
Public Notice No. 11
Dated: 01/10/2004
PLASTIC PRODUCTS
Sl.No. Export Item
Qty.
Import Item
Qty. Allowed
H546
Synthetic
(Plastic)
Fishing Nets
1 kg
- Relevant Knotless HDPE Raschel Netting (For bottom of fishing net)
- For 1 kg of HDPE
Knotted
netting
content in the export
product
(i) HDPE Granules
(ii) Relevant Colour Master Batch - For 1 kg of PP
Twine /Rope content
in the export product
(i) PP Granules
(ii) Relevant Colour Master Batch - Relevant Lead Sinkers
- Relevant EVA Floats
1.05
kg/kg
content in the
export
1.06 kg/kg content in the export product 0.02 kg
1.05 kg/kg content in the export product 0.02 kg
102 No/100 No. Content in the export product 102 No./100 No content in the export product. Note: In case of export of coloured items, Relevant Colour Master Batch shall be allowed and not in other cases.
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.