DGFT Committee Minutes
pdfcrowd.com PRO version Are you a developer? Try out the HTML to PDF API Directorate General of Foreign Trade Udyog Bhawan DES-V Section
Minutes of NC-V meeting held on 24.01.2013
The meeting No.42/AM-13 for the licensing year 2012-13 to consider the cases under Duty Exemption Schemes (Chapter-
- was held on 24.01.2013 in Room No.11 of DGFT under the Chairmanship of Shri K.C. Rout, Addl. DGFT. The following officers were present:- S.No. Name of the representatives and their designation Department
Dr. R.A. Lal, Director R.O., TC, Noida 2. Shri Nand Lal, Sr. D.O. DIPP 3. Shri K.C. Meena, Dy. DGFT DGFT 4. Shri Kuldeep Singh, Assistant Director MSME 5. Shri P.P. Pasricha, F.T.D.O. DGFT
At the outset, the Minutes of NC-V Meeting Nos.41/AM-13, dated 17.01.2013 was taken for ratification. As there were no amendments to the same, the above referred minutes of 17.01.2013 were adopted for implementation by the Committee without any amendment. The agenda for meeting No.42/AM-13 dated 24.01.2013 was taken up for discussion and the decision taken in respect of each case is enumerated below:-
MEETING NUMBER :42/84-ALC3/2012 MEETING DATE : 24.01.2013
Case No.:5/42/84-ALC3/2012
Party Name: KABADI SHANKARSA & CO., Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Approved
PRO version 1 HQ File :01/84/050/00385/AM13/ RLA File :07/24/040/00274/AM13/ Lic.No/Date:0710091275 11.10.2012 Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
Blankets made out by using 2/38 and 1/16 Polyester Acrylic 80:20 yarn in the ratio of 1:1 of the imported material 47,607.400 Kgs. 2/38 Polyester Acrylic 80:20 blended yarn with+/-10% tolerance 24,994 Kgs. 1/16 Polyester Acrylic 80:20 blended yarn with+/-10% tolerance 24,994 Kgs. The R.A. shall be advised to take necessary action subject to compliance of other usual conditions.
2
Case No.:2/42/84-ALC3/2012
Party Name: RENFRO INDIA PRIVATE LIMITED Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Approved HQ File :01/84/050/00382/AM13/ RLA File :31/83/040/00154/AM13/ Lic.No/Date:3110056442 10.12.2012 Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee as per justification & sample given by applicant firm and after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
Knitted socks made of Wool, Nylon, Elastane/ Polyester (Net weight of Wool = 4016.167 Kgs., Nylon = 365.267 Kgs., Elastane/Polyester
8.844 4390.270 Kgs. Wool yarn 4257.00 Kgs. (including 6% wastage) Nylon yarn 387.00 Kgs. (including 6%
PRO version Kgs.) ( g wastage) Polyester yarn 9.370 Kgs. Kgs. (including 6% wastage)
3
Case No.:1/42/84-ALC3/2012
Party Name: RABIA LEATHER INDUSTRIES PRIVATE LIMITED, Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Deferred HQ File :01/84/050/00381/AM13/ RLA File :04/24/040/00197/AM13/ Lic.No/Date:0410141716 11.12.2012 Defer Date: 21.02.2013 Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has not furnished the following information/details in support of their proposal:-
i) Detail specification, GSM and dimension of export and import items. ii) Manufacturing process indicating stage-wise wastage of major inputs with complete calculation of requirement of inputs for manufacture of each export item. iii) Consumption of all the inputs with corresponding production of export items for the three years duly certified by concerned Central Excise/Chartered Accountant. iv) The sizes of export products and calculation for requirement of inputs for each export product. v) Input and indigenous content in each export product separately.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
Case No.:4/42/84-ALC3/2012
Party Name: KABADI SHANKARSA & CO., Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Approved
PRO version 4 HQ File :01/84/050/00384/AM13/ RLA File :07/24/040/00371/AM13/ Lic.No/Date:0710092629 20.12.2012 Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
100% Throws made out by using 100% Acrylic worsted spun yarn 80,520 Kgs. 100% Acrylic worsted spun yarn 84,546 Kgs. (Including 5% wastage)
5
Case No.:6/42/84-ALC3/2012
Party Name: RELIANCE INDUSTRIES LTD. Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Deferred HQ File :01/84/050/00386/AM13/ RLA File :03/95/040/00648/AM13/ Lic.No/Date:0310718052 24.12.2012 Defer Date: 21.02.2013 Decision: The Committee considered the case as per agenda alongwith other relevant papers and decided to seek the comments of Addl. Industrial Adviser, Department of Chemical & Petro-chemical, Ministry of Chemical & Fertilisers and Textiles Commissioner, Mumbai on the proposal of applicant firm. Therefore, the Committee has decided to defer the case for re-listing on 21.02.2013.
Case No.:3/42/84-ALC3/2012
Party Name: SRF LIMITED Meet No/Date:42/84-ALC3/2012 24.01.2013 Status: Approved HQ File :01/84/050/00383/AM13/ RLA File :04/24/040/00192/AM13/ Lic.No/Date:0410142076 27.12.2012 Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case, taking in cue from SION A-2821 and A-2398, as detailed below:- S.No. Export Product Export Import item Quantity
PRO version 6 Quantity allowed 1. Polyester Tyre Cord fabric (DIPPED) 80,000 Kgs. Polyester Chips (For industrial yarn) 87,305 Kgs. Olbo Plast 695 Kgs. V.P. Latex 5200 Kgs. Spin finish oil 720 Kgs Gril bond grade: 1701/6-50% 400 Kgs. MANUAL AGENDA CASES
(7)
Case No.679
M/s Shahi Exports Pvt. Ltd., Faridabad NC 42/AM-13, dt. 24.01.2013 File No.01/84/162/434/AM-13/DES-V Fixation of input output norms in respect of Annual Advance Authorization No.0510302443 dated 15.09.2011. Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee as per CAD/CAM and measurement of the export product and after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
Ladies Top made of 100% Polyester dyed fabric, GSM- 90+/-10%, Style No.H22316 1 pcs. 100% Polyester dyed fabric, GSM-90+/-10% 1.52 Sq. meter per piece 2. Ladies Top made of 100% Polyester dyed fabric, GSM- 81+/-10%, Style No.H22338 1 pcs. 100% Polyester dyed fabric, GSM-81+/-10% 1.42 Sq. meter per piece 3. Ladies Top made of 100% Polyester printed fabric, GSM- 1 pcs. 100% Polyester printed fabric, GSM-52+/-10% 1.25 Sq. meter per piece
PRO version y p 52+/-10%, Style No. 00288843 p p 4. Girls Top made of 100% Polyester dyed fabric, GSM- 110+/-10%, Style No. JSW12HSH04 1 pcs. 100% Polyester dyed fabric, GSM-110+/-10% 1.10 Sq. meter per piece 5. Ladies Top made of 100% Polyester dyed fabric, GSM- 53+/-10%, Style No. 1005787 1 pcs. 100% Polyester dyed fabric, GSM-53+/-10% 2.43 Sq. meter per piece 6. Girls Skirt made of 100% Polyester knitted printed fabric, GSM-40+/-10%, Style No.CX8 7108725 1 pcs. 100% Polyester knitted printed fabric, GSM-40+/- 10% 2.54 Sq. meter per piece 7. Girls Skirt made of 100% Polyester knitted printed fabric, GSM-40+/-10%, Style No.CT8 7108732 1 pcs. 100% Polyester knitted printed fabric, GSM-40+/- 10% 1.53 Sq. meter per piece 8. Ladies Scarves made of 100% Cotton printed fabric, GSM- 126+/-10%, Style No. MX24H21 1 pcs. 100% Cotton printed fabric, GSM-126+/-10% 1.70 Sq. meter per piece 9. Ladies Blouse made of 100% Polyester printed fabric, GSM- 85+/-10%, Style No.00291111 1 pcs. 100% Polyester printed fabric, GSM-85+/-10% 2.74 Sq. meter per piece 10. Ladies Top made of 100% Polyester printed fabric, GSM- 95+/-10%, Style No. 122CC1F011 1 pcs. 100% Polyester printed fabric, GSM-95+/-10% 1.55 Sq. meter per piece 11. Ladies Camisole made of 100% Cotton Denim printed fabric, 1 pcs. 100% Cotton Denim printed fabric, GSM-149+/- 0.81 Sq. meter per piece
PRO version GSM-149+/-10%, Style No. 75276 10% 12. Ladies Top made of 99% Polyester 1% Lurex dyed fabric, GSM-54+/-10%, Style No. 113-303 1 pcs. 99% Polyester 1% Lurex dyed fabric, GSM-54+/- 10% 2.12 Sq. meter per piece 13. Girls Rompers made of 100% Cotton Denim printed fabric, GSM-149+/-10%, Style No. JSS13CPS51 1 pcs. 100% Cotton Denim printed fabric, GSM-149+/- 10% 1.43 Sq. meter per piece The GSM should match in both import and export.
(8)
Case No.680
M/s C.I.L. Textiles Pvt. Ltd., Indore File No.01/84/50/316/AM-12/DES-V Ratification of input output norms in respect of Advance Authorisation No.1110026261 dated 28.11.2011. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has not furnished the following information/details in support of their proposal:-
i) To indicate thickness and sizes of export items. ii) Justification of inclusion of two additional items in comparison to last Advance Authorization. iii) Specification/sizes of Paulownia wood frame and Cord. iv) Consumption of all inputs with corresponding production of export item duly certified by Chartered Accountant.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
PRO version
(9)
Case No.681
M/s Apsara Silks, Bangalore File No.01/84/50/259/AM-13/DES-V Ratification of input output norms against Advance Authorisation No.0710090679 dated 12.09.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and examined the sample provided by the applicant firm. The Committee after deliberations decided to re-fix the ad-hoc norms against the Advance Authorization issued in this case by allowing 4% wastage on weight basis in each category.
The GSM should match in both import and export. The R.A. to call for the declaration from the applicant firm regarding weight of export and import item in each category and allow import quantity with 4% wastage on export quantity on weight basis.
(10)
Case No.682
M/s Antique Non-woven Pvt. Ltd., Vadodara File No.01/84/162/254/AM-13/DES-V Ratification of input output norms against Advance Authorization No.2410037440 dated 21.09.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
PP Non-woven fabric 50,000 Kgs. PP Granules 50,000 Kgs.
PRO version (11)
Case No.683
M/s Sunrise Silk Udyog, Bangalore File No.01/84/50/416/AM-12/DES-V Ratification of input output norms against Advance Authorization No.0710086056 dated 06.02.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:- S.No. Export Product Export Quantity Import item Quantity allowed 1.
100% Natural Silk Madeups (Scarves-printed) made out of 100% Natural Silk Fabrics, GSM-33-100 with Plus or minus 10% variation 1000 Kgs. 100% Natural Silk Fabrics, GSM-33-100 with Plus or minus 10% variation, Fabric width-44” 1020 Kgs. (including 2% wastage) The GSM should match in both import and export.
(12)
Case No.684
M/s Masturlal Fabrichem Pvt. Ltd., Mumbai File No.01/84/50/316/AM-13/DES-V Ratification of input output norms against Advance Authorization No.0310610408 dated 11.01.2011. Decision: The Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. Accordingly, Committee after deliberations decided to ratify the Advance Authorization issued in this case as detailed below:-
PRO version S.No. Export Product Export Quantity Import item Quantity allowed 1.
Filter Bags made out of Polyester non-woven needle felt, GSM-540 11,000 Sq. meter. Polyester non-woven needle felt, GSM-540 11,220 Sq. meter (including 2% wastage on weight basis) The GSM should match in both import and export.
(13)
Case No.685
M/s SRF Ltd. File No.01/84/50/305/AM-12/DES-V Ratification of input output norms in respect Advance Authorization No. 0410130299 dated 15.11.2011. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product. iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for
PRO version consideration of the proposal. The case stands for re-listing on 21.02.2013.
(14)
Case No.686
M/s SRF Ltd. File No.01/84/50/233/AM-13/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410139005 dated 22.08.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product. iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
PRO version (15)
Case No.687
M/s SRF Ltd. File No.01/84/50/394/AM-12/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410134196 dated 29.02.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product. iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
(16)
Case No.688
M/s SRF Ltd. File No.01/84/50/237/AM-13/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410139336 dated 30.08.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm
PRO version has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product. iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
(17)
Case No.689
M/s SRF Ltd. File No.01/84/50/001/AM-13/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410134195 dated 29.02.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product.
PRO version iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
(18)
Case No.690
M/s SRF Ltd. File No.01/84/50/21/AM-13/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410134718 dated 13.03.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and observed that applicant firm has requested for increase of quantity of Grill Bond grade 1701/6.50% for export of Polyester Tyre – Cord fabric (Dipped) from 5.00 Kgs./M.T. to 29 Kgs./M.T. The Committee noticed that quantity was allowed taking in cue from SION A-2398. The applicant firm has given some clarification on the subject. However, the applicant firm has not furnished the following information/details in support of their proposal:-
i) Complete manufacturing process indicating calculation for quantity of Grill Bond required in the manufacturing of export items. ii) Function/use with justification of higher quantity of Grill Bond in the export product and also effect of using higher quantity in export product. iii) Consumption of all the raw materials (including Grill Bond) with corresponding production of export item duly certified by Central Excise or Chartered Accountant for the last three years.
Accordingly, the Committee after deliberations decided to ask the applicant firm to make available the above information/details for consideration of the proposal. The case stands for re-listing on 21.02.2013.
(19)
PRO version
Case No.691
M/s SRF Ltd. File No.01/84/50/350/AM-13/DES-V Ratification of input output Norms in respect of Advance Authorization No.0410141216 dated 21.11.2012. Decision: The Committee considered the case as per agenda alongwith other relevant papers and decided to refer to DIPP for their examination and comments. It was decided to defer the case for re-listing on 21.02.2013.
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.