DGFT Committee Minutes

NAGAR HAVELI PERFUMES AND AROMATiCS Lie. no. 0310475546 dt. 19.06.2058 As discussed In meeting For similar item Norms have been approved in case no A-229 in meeting no 30/10 held on 30.03.2010, taking in to consideration these norms, the licence may be ratified as applied for closure purposes K

NAGAR HAVELI PERFUMES AND AROMATICS Lie. no. 0310328730 dt. 05.05.2005 As discussed in meeting Its V m-in For similar Item Norms have been approved in case no A-229 in meeting no 30/10 heid on 30.03.2010, taking In to consideration these norms, the licence may be ratified as applied for closure purposes

3 NAGAR HAVELl PERFUMES AND AROMATICS Lie. no. 0310415018 dt. 08.01.2007 As discussed In meeting fA' ))\ _ For similar item Norms have been approved in case no A-229 in meeting no 30/10 held on 30.03.2010, taking in to consideration these norms, the licence may be ratified as applied except for Item no 3 i.e Formic Acid, which is not allowed for closure purposes

NAGAR HAVELI PERFUMES AND AROMATICS Lie. no. 0310276902 dt. 25.06.2004 As discussed in meeting For similar item Norms have been approved in case no A-229 In meeting no 30/10 held on 30.03.2010, taking in to consideration these norms, the licence may be ratified as applied for closure purposes c

NAGAR HAVELl PERFUMES AND AROMATICS Lie. no. 0310328729 dt. 05.05.2005 As discussed in meeting cssESJsaar For similar item Norms have been approved in case no A-229 in meeting no 30/10 held on 30.03.2010, taking in to consideration these norms, only import item No.l is allowed as applied for. The second import item i.e formic acid is not allowed. 2. The above decision is only for closure of this licence

NAGAR HAVELI PERFUMES AND AROMATICS Lie. No. 0310328666 dt. 05.05.2005 ( as amended on 31.05.2006) As discussed In meeting For similar item Norms have been approved in case no. 274 in meeting no 33/03 held on 10.02.2003, taking in to consideration these norms, licence is ratified as applied for. 2. The above decision is only for closure of this licence \n

M/s NAGAR HAVELI PERFUMES AND AROMATICS Licence No. 0310286088 dt 13.08.2004 For similar item Norms have been approved in case No. A-229 in meeting No. 30/10 held on 30.03.2010, taking into consideration these norms import item i.e. Ethyl Vinyl Ether-3.115 kg/kg of export product i.e. TRANS-2-N0NENAL. 2. The above decision is only for closure of this licence

M/S NAGAR HAVELI PERFUMES AND AROMATICS Licence No. 0310350052 dated 03.10.2005 As discussed in the meeting. For simiiar item Norms have been approved in case No.M-274 in Meeting No.33/AMd3 heid on 19.02.2003, taking into consideration these norms, iicence can be ratified as per beiow Norms oniy for closure purposes. No repeat iicence. Ill Export Item Qty. Import Item Oty ailowed Trans-2-Tridecenai 1 kg. ALDEHYDE C-110 UNDECYLIC 4.0 kg. ETHYL VINYL ETHER 2.32 KG. 2. The above decision is only for dosure of this licence.

Government of India ^7- "^7/ /^ Ministry of Chemicals and Fertilizers Department of Chemicals and Petrochemicals Subject: Advance Authorization application from M/s. Songwon Specialty Chemicals India Pvt Ltd for the import of raw material against the export of Quent 19/Songnox PQ/ Alkanox 24-44 /Tetrakis (2,4 -dl tert-butylphenyl) [1,1-blphenyl] 4,4- iiylbisphosphonlte '(Advance Authorization No. 3410046^0 ... 13.3.204 5 M/s Songwon Specialty Chemicals India Pvt. Ltd. have submitted precem import 0? raw material against the export of Quent 19/Songnox PQ/ Alkanox 24-44 /Tetrak.s (2,4-di tert-butylphenyl) [l.l-biphenyl] 4,4-diylbisphosphonite The aoDlication have been examined based on the addition information furnish by the firm. The Department recommends t^f^llowing norms for the present Advance Authori application. ^^2) k \ 00 >-1 ! °l9 32'jORfT/ Item of Export Quent 19/Songnox ^Q/ Alkanox 24-44 /Tetrakis (2,4 -di tert-butylphenyl) [1,1-biphenyl]4,4- diylbisphosphonite Qty. Item of Import

1. Biphenyl
2. 2,4 -Ditertiary-Butyl phenol (2,4 DTBP) Qty 0.189 kg 0.866 kg This issues with the approval of competent authority. \ \ ^ \ ; (A.K. AGARWAL) Addl. Industrial Adviser Tel. No. 011-2338 1430 I rnn rnr'" P.n O.'n nCiFT I idv^H Rh?^wnn,New Delhi-11_

, ,■ \N

. P-47014/11/2019- aqua gTfota; a 3flT 3^ jkleRT afrr aricift^ czrrmr ( 3W:3TRT ) V

o ftw-: Glass Industries Pvt ^ ^ 3TI5^ WFI^ ^ ^ ^ I arftrr . 03108217321^ ^ 18 .06.2018 01/83/050/01024/AI/l19 dated.27.02.2019 The case has been examined and taking cue from SION . A 1060, the following norms is recommended allowing 6% wastage. SrTted^irughened Glass 6mm thickness - Quantity 500 Sq. meter sSorofloat (Float Glass) 6mm thickness - Quantity 530 Sq. meter (relevant quality) (Nand Lai) Consv-itant 06.05.2019 rNC-IV) r-.',

; J .-1 hW , ;tt. 7/53/21319-STrfr i dliuloi'ij 3ftTb<uldl 3il'yir^ch "dlfci W 'dclticrj f%?TRr o f^TSRT:- Orient Abrasives Ltd. 310823572 R<riici-> 05/09/2018 I rl ^ 3TT^^ 3T]3OTS7TR^ ^ 3^ II ,^3^; 01/87/050/Q0548/AM-19/DES-2 dt. 13.10.2018 The case has been examined and the fiiim has claimed >A/astage of 3% for the import item Calcined Alumina and for item Graphite Electrode 0.015 MT for export of 1 MT of White Fused Alumina. The value wise Graphite Electrode comes to 14.6 % of FOB value of export which appears to be higher side. We may allow up to 5% FOB value of Export. Accordingly, following norms is recommended:- Export item: White. Fused Alumina Qty: 1500 MT Import Items :

1. Calcined Alumina: 1545 MT
2. Graphite Electrode; up to 5,.% FOB value of Export. (Nand Lai) Consultant 22.04.2C19 DGFT fDES4V) ;4' .j--.

/J^ JIM- "J -r"/ M t. 7/36/2019-^tTT^ sftr 2-

Subject: Advance Authorization No. 0910066690 dated 20.09.2018 for export of Glass Epoxy

Laminates of Various Grades- M/s. Lamtuf Plastics Ltd. OllS^P>l6 523 jo /3 0/A>W9 Ref: DGFT U.O. No. 01/83/050/00290/AM-19/DES-IV/ dated 19.06.19 In the past 5% wastage was allowed taking cue from A 1037, for the export of Glass Fiber reinforced Plastic product. The firm has represented and stated that in case of raw material Epoxy reason there is 80% solid (Non volatile) and with 20% solvent i.e. volatile content which evaporates during impregnating process and 80% deposited. The Glass Epoxy Laminate is prepared under high pressure press involving heat and pressure. The edges are trimmed to require sizes. They have claimed 47% wastage in Epoxy Resin and 15% wastage in Glass woven fabric. Taking into consideration of information furnished by the firm 10% wastage is allowed for Glass woven fabric and 10% wastage in Epoxy Resin (but since in Epoxy Resin 20% solvent Is there therefore total wastage comes 30%). Accordingly following revised norms are recommended. Export item : Glass Epoxy Laminates of various Grades Quantity : 1,00,000 Kg Import item: SI. No. Item Description Quantity Recommended 1. Glass woven fabric GSM 100 to 220 (of Relevant GSM) 1.10 Kg / Kg content contained in export product 2. Epoxy Resin viscous Liquid (containing 80% solid and 20% volatile solvent 1.30 Kg / Kg content contained in export product (Nand La!) Consultant 19.06.2019 DES-IV

i' ciV; 9 ji ' NO.7/12/2017-TSW "l^ffXjrQ department of industrial policy & promotion /y/ ) (TSW Section) Subject; Advance Authorization No. 0510407960 dated 01-10-2018 for the export of Single Sided Decorative Aluminium Foil Laminates (without barrier paper) - M/s GREENLAM INDUSTRIES LTD. Ref: DGFT UO. No.01/83/050/00635/AM-19/DES-4 Dated 19.06..2019 In this past norms for the export of above product was approved in meeting no.7 dated 15.5.2013. Accordingly, following norms are recommended:- i 2- t I Export Item no 1 to 4 Qty. Import items Qty. Single Sided Decorative As per

1. Kraft Paper (60 gsm-205 gsm) 1.033 Kg Aluminium Foil application
2. Aluminium Foil ( 60-100 Micron) 0.3733 Kg Laminates (without
3. Tissue Paper (20 gsm-38 gsm) 0.033 Kg barrier paper) Thickness
4. Phenol 0.457 Kg 0.70 mm to 1.20 mm. As
5. Melamine 0.133 Kg per application
6. Methanol 0.398 Kg
7. BOPP Film 0.011 Kg Note:- i) ii) The above norms have been worked out for 1.0 mm thickness with an average weight of 2.15 Kg +/-2.5%/Sq. Meter In the case of variation in thickness/weight, the quantity of items of Imports I.e. Kraft Paper, Phenol and Para Formaldehyde to be allowed by allowed by adopting the formula as follows:- iil) Iv) AXB/C Where A= Quantity of Kraft Paper, Phenol and Methanol allowed for 1.0 mm thickness with average weight 2.15 Kg/Sq. meter B= The thickness or weight per Sq. Meter of Single sided Decorative Aluminium Foil Laminated Sheet (without barrier paper) to be exported C= Either the thickness of 1.0 mm or weight of 2.15 Kg +/-2.5% per Sq. Meter of 1.0 mm thickness The quantities of items at Sr. No.(2) Aluminium Foil (3) Tissue Paper, (5) Melamine and (7) BOPP Film will remain unchanged irrespective of change in thickness or weight of export product The above Formula can be applicable for export product of thickness 0.7 mm to 1.20 mm thickness (NAND LAL) Consultant 19.06.2019 DGFT fNC) \

M/S JOCIL LTD. LIC.NO. '"aAtC ra pi i 2 d C?./ H

1. 6610000016 DT.IO.10.2018
2. 6610000019 DT.08.11.2018 manufacturing process " ^.No.

Jxport Item NOW LAURIC DISTILLED VALUE MIN 205 MAX 211 SAPVALUE MIN 205 MAX 211 IODINE VALUE MIN 37% MAX 41% COMPOSTION C12 0.5% C 14 0.5% C 16 MAX 56% C 18 MAX 12% C 18 :1 28-42% C 18-2 MAX 10% C 18: 3 0.4% Qty. 1000 Kg Jmport Item 1. Rbd pam stearine free fatty AGD^"^ IODINE VALUE MIN 30 TO MAX 48 SAP VALUE MIN 205 UNSAP - MATTER MAX 1.00 M05ITURE MAX 0.5 Qty. 408.39 Kg r: appropriatelv(or red.mptiop „fthese lieen" r"'"" """" O: ^C- It/

: (d^v3 P-47011/155/2019-^lTrH^^ {^txj^3T^T§7Rr) M/s Verterra Ventures ^3ii^c;(r| soImc 3iidCHC cHi<ric;sl^ O

w ^,3110067329 21.02.2019 ^Tcf3^:- 01/83/50/1212/AIV1-19 dated. 27.02.2019 In this case, description of Import and Export items is exactly the same, it means that there is no manufacturing process involved. DPIIT, therefore recommend the rejection of the case. (Nand Lai) Consultant 07.02.2019 DGFT fDES-IV>

P-47011/154/2019-^t.i.H^scH rv ^Ud cllPlai^^ atki-uldl cj-yldi dci^3fhr3iidRcbc^mKi^^ (S1^3WW3T) o M/s Samrat Plywood Ltd. ^3ii<^ci<r| ^dHd 3iiidHcl cHMcid14i 01/83/50/141VAIVI-19 dated. 20.03.2019 Taking cue from H-68 and the cases approved in the past, the followinq norrrs are recommended:- Export 1tern: S. No. Item Description Quantity (Kq.) 1 to 3 Double Side Decorative Laminates with Barrier Paper size Thickness 1.8 mm to 2.4 mm, as per the application 1 Sq.Mtrx 10.00 mm thickness of 14.5 kg +/-2.5% Import ems: SI No. Item Description Quantity recommended 1. Kraft Paper 9.15 kg or applied quantity whichever is less 2. Base Paper 0.214 kg or applied quantity whichever is less 3. Barrier Paper 0.172 kg or applied quantity whichever is less 4. Tissue Paper 0.027 kg or applied quantity whichever is less 5. Phenol 3.52 kg or applied quantity whichever is less 6. Melamine 0.362 kg or applied quantity whichever is less *7. Paraformaldehyde (91+/-1% Purity) 2.90 kg or applied quantity whichever is less 8. B.O.P.P. Film 0.01 kg or applied quantity whichever is less The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2 5% and are applicable on 1.2 mm to 2.4 mm thickness. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanol and Kraft paper to be allowed may be arrived at by adopting the following formula: A x B/C where A=Quantity allowed for 10.00 mm thickness of weight.14.5 kg +/- 2.5%,B=The thickness or weight/ sq. Meter of decorative laminates proposed to be exported, C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of 10.00 mm thickness. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. import of Base Paper will be restricted to 18% of FOB value of export, for the export of ^ow 2.5 mm thickness DGFTfDES-IVI (NAND LAL) Consultant 03-07-2019

("'.■A' jny- / 7^ 1' P-47011/137/2019-^tTRT^ ^rfSr^RT 3ftT 3^ 3^^H^^3ttT3^idR4i c^lMK (^rw 3T^mw) M/sAdsunTelcomlndustriesPvt.Ltd. ^ HT^T^ o

o ■ I W;3t: DGFTU.O.No. 01/83/050/01400/A|V|-19 dt. 20.03.2019 The case has been examined and the firm has claimed wastage of 25.693% for item No. 1 i.e. ultra violet rays protected Alumminium Glass Sheet and 18.63% for item No. 2 i.e. Three layered ultra violet rays protected. PET film - AB glue sheet (thickness 0.11 mm). Based on information furnished by the firm wastage of 15% may be allowed for item No. 1 and 13% for item No. 2 and accordingly following norms flr?ay^feef recommended: Export product: Mobile phone tempered glass (Assorted Models) (6891.325 sq. metre) Quantity : 700.00 (thousand in Nos.) 8. No. Item Description Quantity recommended 1. Ultravoilet Rays Protected Aluminium Glass Sheet (thickness 0.3 mm) 79250 sqm 2. Three layered Ultraviolet Rays Protected PET Film -AB Glue Adhesive Sheet (thickness 0.11 mm) 7787.197 sqm (Nand Lai) Consultant 06.06.2019 DES-IV

, a/- 2,^1 i P-47011/153/2019-flk''d^cri Ministry of Commerce & Industry Department of Industrial Policy & Promotion (TSW- SECTION)

Subject: Advance Authorization No.0510409925 dated 13.03.2019 for the export of

Multiple Walled Insulating Unit of Glass - M/s GSC Glass Ltd. Ref : DGFT UO. No.01/83/50/01401/AM-19 dated 20/03/2019 Taking cue from SIGN A 1060 and norms approved in the past, the following norms is recommended:- Export Items:- SI. No. Item Description Quantity 1. 62/0- Multiple Wailed Insulating Unit of Glass: {The Export product shall contain 2489.49 Sqm of 8mm Float Glass and 4978.98 Sqm of 4mm Float Glass & 2489.49 sq. Mtr of 0.76 mm PVB Film, 9957.96 mtr of 15.50 mm of Aluminium Spacer & 746.85 Kg of molecular sieve) 2489.490 sq mt Import Items: SI. No. Item Description Quantity recommended 1, 8mm Float Glass 2688.65 sq mtr 2 4 mm Float Glass 5377.30 sq mtr 3. 15.50 mm Aluminium Spacer Net + 2% 4. 0.76 mm PVB Film (PolyvinI butyrai Film) 1.10 sq mtr / sq mtr content in export products 5. Molecular Sieve (NAND LAL) Consultant 02.07.2019 DGFT(DES-IV)

Ci'' f-i'i y- ?T, P-47011/150/2019-€tT?HS5c1^

w 3TCT alk 3?ft^ aMI^w Tjt f%3TRr o ftW GREENLAM INDUSTRIES LTD, AA 05104099421cJ5Wl6.03.2019 ^ aTTte" O 3TT3CTU ^ ^ I k3 ^f^:01/83/050/01404/Al/l-19 dt. 20.03.2019 Taking cue from H-302 and the norms approved in the past, the following norms are recommended:- Export Item: 1% S. No. Item Description Quantity (Kp.) 1 to 12 Single Side Decorative Laminates without Barrier Paper thickness 2.8mm to 3.0 mm Quantity and other things as per application 1 sq mtr x 1 mm Thickness of wt. 1.45 Kg +/-2.5% Import Items: SI. No. Item Description Quantity recommended 1. Kraft Paper 60 GSM to 230 GSM, as per application 1.033 kg or applied quantity whichever is less 2. Base Paper 50 GSM to 150 GSM, as per application 0..133 kg or applied quantity whichever is less 3. Tissue Paper 18 GSM to 65GSM, as per application 0.033 Kg or applied quantity whichever is less 4. Phenol 0.457 kg or applied quantity whichever is less 5. Melamine 0.133 kg or applied quantity whichever is less 6. Methanol 0.398 kg or applied quantity whichever Is less 7. B.O.P.P. Film 0.011 kg or applied quantity whichever is less Note:l. The above norms has been worked out on the 1.00 mm thickness with average wt. of 1.45 Kg +/-2.5% 2. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanol ,Kraft paper and Titanium Dioxide to be allowed may be arrived by adopting Formula: AxB/C, Where A= Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/2,5%. B= The thickness or wt/sq. meter of decorative laminates proposed to be exported. C=£ither the Standard thickness of 1.00 mm or the Standard wt.of 1.45 Kg/sq. meter of 1.00 mm thickness. 3.The quantity of BOP? film given above will be for one sq. meter of Decorative Laminates irrespective of thickness and weight of decorative laminates to be exported. 4. The quantity of all the other items unchanged irrespective of change of thickness and weight of decorative laminates to be exported. 5. It is clarified that the above formula is applicable only in case of Decorative Laminates having thickness range between 2.8 mm to 3.0 mm. AND LAL) Consultant 02.09.2019 DGFT (DES-IVl

o J ^r. P-47011/151/2019-(?1y.H^®H Ministry of Commerce & Industry DEPARTMENT OF INDUSTRIAL POLICY & PROMOTION (TSW- SECTION)

---

Subject; Ref : DGFT UO. No.01/83/50/01408/AIVI-19 dated 20.3.19 Advance Authorization No. 0510409976 dated 19-3-19 for the export of scented wax candles - M/s Girdhars International The case has been examined and the firm is exporting scented wax candle in assorted colours, sizes and shapes. Taking cue from K-159, following norms is recommended:- Export Item; Scented Candies in Assorted Colours, Sizes and Shapes , handcraft wax candles (style DTI 9)- containing micro crystalline wax 0.023 kg /Kg of export Quantity: Import Items > 1 Kg S.No. Item description Quantity recommended 1 Paraffin Wax 0.51 Kg 2 Stearic Acid Chemicals 0.44 Kg 3 Micro crystalline wax 0.023 Kg 4 Fragrance 0.02 Kg (subject to 8% FOB value of export) 5 Wicks 0.002 Kg 6 Colours 0.002 Kg (NAND LAL) Consultant 02.07.2019 DGFT(NC-Vm

NAME-RUBAMIN LIMITED Licence No & Date- 3^/100 ^ ^Ce^tf 03 Item Of Export Qty Item Of Import Qty SODIUM MOLYBDATE IKg Molybdenum compound on dry basis containing Molybdenum content of 7.5% i.e. 0.4408 kgs. 5.877 Hydrogen Per oxide 0.300 Tri Octyle Amine/Alamine 336 0.00156 Primary Amine-N 1923 0.00429 Note-1. The above quantity of Molybdenum compound has been worked out considering Molybdenum content of 7.5% and recovery of around 90% on Molybdenum content basis i.e. 1.111 Kg Molybdenum/Kg of Molybdenum contentin the Molybdenum compound. Note-2. In case of variation of Molybdenum content in the Molybdenum compound , the pro-rata entitlement of Molybdenum compound shall be worked out considering the Molybdenum content in the Molybdenum compound as per certificate of analysis (COA) from foreign supplier.

NAME-RUBAMIN LIMITED Licence No & Date Item Of Export Qty Item Of Import Qty Ammonium Di molybdate ' IKg Molybdenum compound on dry basis containing Molybdenum content of 7.5% I.e. 0.633 kgs. 8.438 Hydrogen Per oxide 0.433 Tri Octyle Amine/Alamine 336 0.00156 Primary Amine-N 1923 0.00429 Note-l. The above quantity of Molybdenum compound has been worked out considering Molybdenum content of 7.5% and recovery of around 90% on Molybdenum content basis i.e. 1.111 Kg Moiybdenum/Kg of Molybdenum content in the Molybdenum compound. Note-2. In case of variation of Molybdenum content in the Molybdenum compound , the pro-rata entitlement of Molybdenum compound shall be worked out considering the Molybdenum content in the Molybdenum compound as per certificate of analysis (COA) from foreign supplier. ^1111

NAME-RUBAMIN LIMITED Licence No&Date-3^\0C'^bO76 ^ QiAx 7<^4 Item Of Export Qty I Item Of Import Qty SODIUM MOLYBDATE IKg Molybdenum compound on dry basis containing Molybdenum content of 7.5% i.e. 0.4408 kgs. 5.877 Hydrogen Per oxide 0.300 Tri Octyle Amine/Alamine 336 0.00156 Primary Amine-N 1923 0.00429 Note-1. The above quantity of Molybdenum compound has been worked out considering Molybdenum content of 7.5% and recovery of around 90% on Molybdenum content basis I.e. 1.111 Kg Molybdenum/Kg of Molybdenum content in the Molybdenum compound. Note-2. In case of variation of Molybdenum content in the Molybdenum compound , the pro-rata entitlement of Molybdenum compound shall be worked out considering the Molybdenum content in the Molybdenum compound as per certificate of analysis (COA) from foreign supplier. I'A

?r. P-47011/151/20i9-flW^S?T <v Ministry of Commerce & Industry D^EPARTMENT OF INDUSTRIAL POLiCY & PROMOTION (TSW-SECTION)

---

Subject; Ref : DGFT UO. No.01/83/50/00076/AM-20 dated 02.05.2019 Advance Authorization No. 0510410427 dated 30-4-19 for the export of scented wax candles - M/s Girdhars international The case has been examined and the firm is exporting scented wax candle in assorted colours, sizes and shapes. Taking cue from K-159. following norms is recommended:- Export Item : Unscented Wax Candles in Assorted Colours. Sizes and Shapes , handcraft wax candles Quantity; import Items 1 Kg S.No. Item description Quantity recommended 1 Paraffin Wax 0.51 Kg 2 Stearic Acid Chemicals 0.44 Kg 3 Micro crystalline wax 0.023 Kg 4 Wicks 0.002 Kg 5 Colours 0.005 Kg 6 Polymer vybar/polyboost/AC wax chemical chemicals 0.011 Kg (NAND LAL) Consultant 02.07.2019 DGFT(NC-Vin