DGFT Committee Minutes

P-47011/208/2019-#nwSoor Cs ^rfSTsw alk'3^ft7T 3=raTpT3T 3^ sfk cZTRH (#rwaww3T) #fr^ Vizag Carbon Pvt. Ltd. 4trantctsT 3Tf?t3T^tfi!mTF. 5010002447 fctrar 25.05.2018 01/83/050/01288/AM19/ Dated: 27.02.2019 n In this case the firm has indicated net content of raw material Electrically Calcined anthracite coal (EGA coal) as 302.8 IMT in the export product and claimed wastage of 6% without giving any justification. We may allow wastage of 2% and accordingly following norms are recommended Export item:- Import item:- S.No. item name Quantity 1. Electrode paste (Net content of Electrically Calcined Anthracite Coal ECA Coal 302.80 MT) 400 MT S. No Item name Quantity 1. Electrically Calcined anthracite coal (ECA coal) 308.856 MT DGFT (DES-IV) ^nd Lai) Consultant 2019

r F. No. 7/80/2019-TSW 31RcT mW 3flT 3^ SMeRT 3?fr3T 3ftT aroto 3 Sub -AA Nos. 0510407426 dated 03.08.2018 . 0510406825 dated 12.06.2018, 0510410576 dated 14.05.2019 &(o^407962 dated 03.10.2018jfor the export of engineered wooden flooring- M/s. Green Lam Industries Ltd. ~ ^ Ref. - I) 01/83/050/00490/AM19/DES-IV II) 01/83/050/00981/A!VI19/DES-IV III) 01/83/050/00114/AM20/DES-1V Iv) 01/83/050/00618/AM19/DES-IV In this case export produced product Is "Engineered'wooden flooring (15.00 m) S. No. mport item Wastage claimed 1. Wood Veneer (for Top Layer) 66.67% 2. Pine wood (for Middle Layer) 100% 3. Wood Veneer (for Bottom layer) 53.85%

4.-8. if' Glue, modifier, hardener and la'cquer/paint/varnish 20% The firm was called for personal hearing by DGFT and the firm's representatives explained the manufacturing process and wastage occurring In manufacturing the export product, giving calculation for requirement of raw materials. It has been stated that the wooden flooring has plank lock which Is used to join wooden flooring with each other on the floor. There are three layers of wooden flooring and import items are 1 to 3 as stated above. The wastage Is due to following reason; , a. b. c. Gradinq Wastage because this Is a natural material having some kind of holes, knots, sap wood, water mark, cracks, because of these the material becomes unusable The Raw Material comes in different sizes and grades. However, the finished product requires fixed sizes and premium grade only. ^ ^ . .. The material is required to store at a certain degree of moisture therefore, the material Is stored in seasoning chamber, and thus the shrinkage wastage is also very higher.

iV d. Cutting wastage is also After deliberation, Com there. mittee decided to fix the following norms, 9n one time basis in all the four A.As. as uhder: Export Items: Engineered Wooden Flooring (thickness: 15.00MM) Quantity: 1 Sq Meter Uiipori nerriO} S.Nb [ . Item Description Quantity recommended 1. Wood Veneer (for top layer) (thickness:3.00MM+/-10%) 1.5670 SQM, 2. ' Pine Wood' (for middle layer) 0.0188 CBM 3. Wood Veneer (for bottom layer) fThickness: 2.20 MM +/-10%) 0.00318 CBM 4. ; Glue-urea formaldehyde 0.2338 Kg 5. Modifier 0.0475 Ka 6. ' Hardher , 0.0400 Kg 7. Lacquer/paint (UV sealer standard, UV sealer anti abrasive, UV top coat anti scratch, UV sealer matt, UV primer, UV filler, UV hydro primer white, UV sealer colourless, UV sealer lifetime, UV sealer white, UV top coat entry scratch matt, stain binder) 0.1365 Kg 8. i Lacquer/ Varnish (colour yellow, red, white, black, blue) 0.0080 Kg DES-IV (Nand Lai) Consultant

I % Government of India cf C'.'rpJcs!? and Farti'irsjc Department of Chemicals and Petrochemicals Subject: Advance Authorization application from M/s. INDOTAN Chemicals Ltd for the import of raw material against the export of BASIC CHROMIUM SULPHATE (Advance Authorization No. 024O2Q§67Q—dated-aSrSrSOTS) Ref: U.O. No 0 //P^ /bojv / . 01/83/50/380 AM-16/DE-S-4/5.Z1- E-S-4/5Zi-dateci—24,8 J 5 M/s. INDOTAN Chemicals Ltd have submitted present application for the import of raw material against the export of BASIC CHROMIUM SULPHATE dpp:;cuiiur: has been exam'ihtTo and Irie Departmerit recomriTenus me norms for the present Advance Authorization application ^ » i iiowing

1. Item of Export Qty. Item of Import Qty BASIC CHROMIUM SULPHATE (BASICITY 33%-35%) 1 kg
2. SODIUM DICHROMATE 0.487 kg This issues with the approval of competent authority. (A.K, AGARW^A*"'^ Addl. Industrial Adviser Tel. No. 011-2338 1430 Shri K.K.Mushahari. FTDO. fDES-IV) O/o DGFT. Udvoa Bhawan.New DelhMI. Deptt. of C&PC U.O. No. 14010/31/2015-CH-il dated 4.12.2015

F. No. 7/80/2019-TSW 3#r 3?it^ sraicw 3?If^ 3% 3lidR+ cilNK {^tW 3WW^) r> Sub:-AA Nos. 0510407426 dated 03.08.2018 ,0510406825 dated 12.06.2018, 0510410576 dated "14.65.2019 & 0510407962 dated 03.10.2018 for the export of engineered wooden flooring- M/s. Green Lam industries Ltd. Ref:- I) 01/83/050/00490/AM19/DES-IV iij. 01/83/050/0098li'AMi9/DES-IV Hi) 01/83/050/00114/A!/I20/DES-1V iv) 01/83/050/00618/AMI9/DES-IV In this case export produced product is "Engineered wooden flooring " (15.00 m) S. No. Import item Wastage claimed. 1. Wood Veneer (for Top Layer) 66.67% 2. Pine wood (for Middle Layer) 100% '■ 3. Wood Veneer (for Bottom layer) 53.85% 4.-8. Glue, modifier, hardener and lacquer/paint/varnish .20% The firm wasi called for personal hearing by DGFT and the firm's representatives explained the manufacturing process and wastage occurring in manufacturing the export product, giving calculation for requirement of raw materials. It has been stated that the wooden flooring has plank lock which is used to join wooden flooring with each other on the floor. There are three layers of wooden flooring and import items are 1 to 3 as stated above. The wastage is due to following reason: a. b. c. Grading Wastage because this is a natural material having some kind of holes, knots, sap wood, water mark, cracks, because of these the material becomes unusable. , xu x- • u ^ The Raw Material comes in different sizes and grades. However, the finished product requires fixed sizes and premium grade only. The material is required to store at a certain degree of moisture therefore, the material is stored in seasoning chamber, and thus the shrinkage wastage is also very higher.

I d. Cutting wastage is also After deliberation, Con- there. basis in all the four A.As. as uhder: Export Items: Enginee mittee decided to fix the following, norms, on one time red Wooden Flooring (thickness: IS.OOMM) Quantity: 1 Sq Meter impon iieiii%>, S.No item Description Quantity ' recommended 1. Wood Veneer (for top layer) (thickness:3.00MM+/-10%) 1.5670 SQM. 2. 1 Pine Wood (for middle layer) 0.0188 CBM 3. Wood Veneer (for bottom ' layer) (Thickness: 2.20 MM +/-10%) 0.00318 CBM 4. : Glue-urea formaldehyde 0.2338 Kk 5. Modifier 0.0475 Kg 6. Hardher 0.0400 Kg 7. Lacquer/paint (UV sealer standard, UV sealer anti -abrasive, UV top coat anti scratch, UV sealer matt, UV primer, UV filler, UV hydro primer white, UV sealer colourless, UV sealer lifetime, UV sealer white, UV top coat entry scratch matt, stain binder) I 0.1365 Kg 8. Lacquer/' Varnish (colour yellow, red, wtnite, black, blue) 0.0080 Kg I ' I DESjy fNand La!) Consultant 3#^ I

P-47011/154/2019-dTrH5^ STRrT^R^in' 3?tT 3^cfRT RiiTpRT J'uIji •Mq4j<Jl Sttr3llclU<^ o^lHR f53si<'l (^rXRT 3W37RT) M/s Samrat Plywood Ltd. ^ 3TT^^t5T 3TT3CT^ 3 03.01.2019 01/83/50/00759/AM-19 dated. 21.01.2019 Taking cue from H-68 and the cases approved in the past, the following norms are recommended:- Export Item: b AA No. 2210016042 dated U S. No. Item Description Quantity 1 Double Side Decorative Laminates with Barrier Paper size Thickness 1.8 mm (15106 SQM) (39010 KG) 4150 Number 2 Double Side Decorative Laminates with Barrier Paper Thickness 2.3 MM (4550 SQM) (15000KG)) 1250 Number Import Items: SI. No. item Description Quantity recommended 1. Kraft Paper 9.15 kg or applied quantity whichever is less 2. Base Paper 0.214 kg or applied quantity whichever is less 3. Barrier Paper 0.172 kg or applied quantity whichever is less 4. Tissue Paper 0.027 kg or applied quantity whichever is less 5. Phenol 3.52 kg or applied quantity whichever is less 6. Melamine 0.362 kg or applied quantity whichever is less *7. Paraformaldehyde (91+/-1% Purity) 2.90 kg or applied quantity whichever is less 8. B.O.P.P. Film 0.01 kg or applied quantity whichever is less Note: 1. The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2.5% and are applicable on 1.8 mm and 2.3 mm thickness. 2. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanol and Kraft paper to be allowed may be arrived at by adopting the following formula: A x B/C where A=Qt/anf/fy allowed for 10.00 mm thickness of weight.14.5 kg +/- 2.5%,B=The thickness or weight/ sq. Meter of decorative laminates proposed to be exported, C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of 10.00 mm thickness. 3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. 4. Import of Base Paper will be restricted to 18% of FOB value of export, for the expoj^f'Of below 2.5 mm thickness ND LAL) Consultant 04-07-2019 DGFTIDES-IVI

c.y^ UXi

P-47011/154/2019-(j)u^^ct^ yrf^T^Tzr sttr 3TiiTpRr cillHK r^^MI 3W3TRT) M/s Samrat Plywood Ltd. ^3TT^3ff1"5an2r 05.02.2019 01/83/50/00800/AIVI-19 dated. 19.02.2019 •\10 r . I AA No. 2210016075 dated Taking cue from H-68 and the cases approved in the past, the following norms are recommended:- Expott Item: S. No. Item Description Quantity 1 Double Side Decorative Laminates with Barrier Paper size Thickness 2.3 mm (2730 SQM) (9000KG) 750 Number Import Items: SI. No. Item Description Quantity recommended 1. Kraft Paper 9.15 kg or applied quantity whichever is less 2. Base Paper 0.214 kg or applied quantity whichever is less 3. Barrier Paper 0.172 kg or applied quantity whichever is less 4. Tissue Paper 0.027 kg or applied quantity whichever is less 5. Phenol 3.52 kg or applied quantity whichever is less 6. Melamine 0.362 kg or applied quantity whichever is less *7. Paraformaldehyde (91+/-1% Purity) 2.90 kg or applied quantity whichever is less 8. B.O.P.P. Film 0.01 kg or applied quantity whichever is less Note: 1. The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2.5% and are applicable on 2.3 MM thickness. 2. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanoi and Kraft paper to be allowed may be arrived at by adopting the following formula; A x B/C where A=Quanf/fy allowed for 10.00 mm thickness of weight.14.5 kg +/- 2.5%,B^The thickness or weight/ sq. Meter of decorative laminates proposed to be exported, C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of 10.00 mm thickness. 3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. 4. Import of Base Paper will be restricted to 18% of FOB value of export, for the exooft of below 2.5 mm thickness NAND LAL) Consultant 04-07-2019 DGFT(DES-m

ft ^ . P-47011/163/2019- StoHSSH ^Kd d-d^iK 3^it7r ^rgtS^ aitr 3w!^ c^jimk (trn^ 3T^3TPr)

Subject: Application of M/s Aica Laminates India Pvt. Ltd. for ratification of input output norms for

export of Double Side Decorative Laminates. Ref; DGFT U.O. No. 01/83/50/01407/AM-19 dated 20.03.2019 Ad. Auth. No.0510409959 Dated- 15.03.2019 Taking cue from H-68 and the cases approved in the past, the following norms are recommended:- 9 S. No. Item Description Quantitv 1 Double Side Decorative Laminates with Barrier Paper Thickness (1.80mm sheet size 2.44Mx1.22M) (as per the application) 35721.60 sq.m Import Items: SI. No. Item Description Quantity recommended 1. Kraft Paper 9.15 kg or applied quantity whichever is less 2. Base Paper 0.214 kg or applied quantitv whichever Is less 3. Barrier Paper 0.172 kq or applied quantity whichever is less 4. Tissue Paper 0.027 kq or applied quantitv whichever is less 5. Phenol 3.52 kq or applied quantitv whichever Is less 6. Melamine 0.362 kq or applied quantitv whichever Is less 7. Methanol 3.85 kg or applied quantity whichever is less 8. B.O.P.P. Film 0.01 kq or applied quantitv whichever is less 1. 2. The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2.5% and are applicable on 1.80 mm thickness. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanol and Kraft paper to be allowed may be arrived at by adopting the following formula: A x B/C where A=Quantity allowed for 10.00 mm thickness ofweightU.S kg +/- 2.5%,B=The thickness or weight/ sq. Meter of decorative laminates proposed to be exported, C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq. Meter of 10.00 mm thickness. 3. 4. The quantity of other items viz. Base Paper, Barrier Paper. Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. Import of Base Paper will be restricted to 18% of FOB value of export, for the export of below 2.5 mm thickness. (Nand Lai) Consultant 04.07.2019 DGFT(DES-IV)

nU P-47Qll/162/2019-(^k'^^cd ^ 3TRH^tR^ attr 3^ Slt^"^HdRct) c-ijiHK {tm^ 3W3TRT) . ,0 (A^ M/s Pacific Industries Ltd. 3ii^c;d ^dHc 3ii3chc .nidcisli I f

O O (3ri?W yrftmr 1310049247 29.03.2019) 01/83/050/00004/AI/I 20 Dated: 02.04.2019 In this case the firm will export polished engineered quartz slab and import consumable items for processing/ polishing the quartz slab. The hardness of polished engineered quartz slab is more or less similar to granite stone. Taking cue from SIGN A1051, A1052 and K133 the following norms are recommended: Export Item Polished Engineered Quartz Slab Quantity:- 257177.00 sq mtr. Import Items S.No Item Name Recommendation value wise 1. Diamond tool for calibrating machine and polishing machine 2.5% of FOB value of export 2. Polishing Diamond Abrasive 2.5% of FOB value of export (Nand Lai) Consultant 22.07.2019 NC-IV £y7cJ I D A

J—■ ^ w 3 P-47011/164/2019-frirB3SfT 3TR?T-H<^U 3^ft3T^7^^3lU5iidR+ C'MiHK (#rXRT 3T^T^) Bananas Beads Ltd. ^3TT^a;?n 3TT3^?TT^7^ ^ Advance Authorisation No- 1510022181 Dated 18.04.2019 01/83/050/00038/AM 20 Dated: 22.04.2019 In the past norms for the export of similar item using similar import item were approved by DGFT, based on personnel hearing of the firms representative. Taking consideration of the above and information provided in the present application, the following norms are recommended: Export Item No. 1:- GLASS BEADS & ARTICLE M/0 GLASS TUBE SOLID Quantity:- 25000.00 kg s. No Item Description Quantity recommended 1. Glass Tube Solid 1.50kg/kg content in the export item. 4. Bead Sticking Powder 2000 kg 5. Oxalic Acid 2000 kg Export Item No. 2:- GLASS BEADS M/0 GLASS ROD SOLID Quantity:- sooo.ooo kg Import Item:- S. No Item Description Quantity recommended 2. Glass Rod Solid 1.20kg/kg content in the export item. Export Item No. 3:- GLASS BEADS AND ARTICLE THEIROF M/0 GLASS BEADS SOLID Quantity:- 7500.000 K.G Import Items:- S. No Item Description Quantity recommended 3. Glass Beads Solid 1.10kg/kg content in the export item. 6. Metal Bead And Finding Solid Net + 5% DGFT (DES-IV) ^and Lai) Consultant

•• P-47011/154/2019-^hrtT^ 3TRcT7?T^tTT ^rf^T^ra" attr 3tft3T 3^fPr 3ttT SHHIW cijRTT l^iTTTT (^TTRT 3RITT7T) -;:^B^M/s Samrat Plywood Ltd. ^3TT^?;5Tf5T^51lJdM<i I AA No. 2210016132 dated 18.04.2019 ^:- 01/83/50/00034/AM-20 dated. 22.04.2019 Taking cue from H-68 and the cases approved in the past, the following norms are recommended;- Export Item: /■> r nh S. No. Item Description Quantity 1 Double Side Decorative Laminates with Barrier Paper size Thickness 1.3 mm (22714 SQM) (43056 KG) 6240 Number 2 Double Side Decorative Laminates with Barrier Paper Thickness 2.2 MM (9027.2 SQM) (26288 KG)) 2480 Number Import Items: SI. No. Item Description Quantity recommended 1. Kraft Paper 9.15 kg or applied quantity whichever is less 2. Base Paper 0.214 kg or applied quantity whichever is less 3. Barrier Paper 0.172 kg or applied quantity whichever is less 4. Tissue Paper 0.027 kg or applied quantity whichever is less 5. Phenol 3.52 kg or applied quantity whichever is less 6. Melamine 0.362 kg or applied quantity whichever is less •7. Paraformaldehyde (91+/-1% Purity) 2.90 kg or applied quantity whichever is less 8. B.O.P.P. Film 0.01 kg or applied quantity whichever is less Note: 1. The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2.5% and are applicable on 1.3 mm and 2.2 mm thickness. 2. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Methanol and Kraft paper to be allowed may be arrived at by adopting the following formula: A x B/C where A=Quantity allowed for 10.00 mm thickness of weightU.S kg +/- 2.5%.B=The thickness or weight/ sq. Meter of decorative laminates proposed to be exported, C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of 10.00 mm thickness. 3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. 4. Import of Base Paper will be restricted to 18% of FOB value of export, for the export of below 2^5 mm thickness (NAND LAL) Consultant 04-07-2019 DGFT (DES-IV)

P-47011/173/2019-atJ^^sH 3^^H^t!r^T3lk3iidR4> c^JNuf^STRT {tm^ 3M3TT7T) Polyon Textiles Pvt Ltd 4^r3ii<^ci<H ^<HMd o 01/83/050/00081/AM 20/ Dated: 15.05.2019 In this case the firm has claimed 15% wastage for glass fiber roving and 11% for non woven geo textile for the manufacture of Fiber Glass Reinforced Grid. Besides above items they will use Bitumen Copolymer and Acralate Copolymer for making export product. Taking cue from SIGN A 1037, wastage of 5% may be allowed for Glass Fiber Roving and Non Woven Geo Textile. Accordingly, following norms are recommended. Export Item:- Fiber Glass Reinforced Grid Quantity:- 63000 Kg Import Items S. No. Import Item Name Quantity 1. Glass Fiber Rovings 1.05 kg/ kg content In the export product 2. Non Woven Geo Textiles 1.05 kg/ kg content in the export product (Nand Lai) Consultant 26.07.2019 DGFT (DES-IV)

F. No. 7/80/2019-TSW 3TR7T 3?ir7T 3% STRTftgr ggm (^tCRT STFTMPT) .^7' I Sub -/V\ Nos. 0510407426 dated 03.08.2018 , 0510406825 dated 12.06.2018, V xegi0410576 datari 14.05.2019-& 0510407962 dated 03.10.2018 for the export of Engineered wooden flooring- M/s. Green Lam Industries Ltd. ^ 1- D Ref; - I) 01/83/050/00490/AM19/DES-1V ii) 01/83/050/00981/A!/I19/DES-IV iii) 01/83/050/00114/Ai/120/DES-IV iv) 01/83/050/00618/AM19/DES-IV In this case export produced product is "Engineered wooden flooring (15.00 m) S. No. import item Wastage claimed 1. Wood Veneer (for Top Layer) 66.67% 2. Pine wood (for Middle Layer) 100% 3. Wood Veneer (for Bottom layer) 53.85% 4.-8. Glue, modifier, hardener and lacquer/paint/varnish 20% The firm was called for personal hearing by DGFT and the firm's representatives explained the manufacturing process and wastage occurring in manufacturing the export product, giving-, calculation for requirement of raw materials. It has been stated that the wooden flooring has plank lock which is used to join wooden flooring with each other on the floor. There are three layers of wooden flooring and import items are 1 to 3 as stated above. The wastage is due to following reason: a. b. c. Grading Wastage because this is a natural material having some kind of holes, knots, sap wood, water mark, cracks, because of these the material becomes unusable The Raw Material comes in different sizes and grades. However, the finished product requires fixed sizes and premium grade only.

• ^ ' The material is required to store at a certain degree of moisture therefore, the material is stored in seasoning chamber, and thus the shrinkage wastage is also very higher.

o d. Cutting wastage is also After deliberation, Corr there. 3 mittee decided to fix the following^ norms, on one time basis in all the four A.As. as uhder: Export Items: Engineered Wooden Flooring (thickness; 1,5.00I/IM) Quantity: 1 Sq Meter impori iieiiis, S.No Item Description Quantity recommended 1. Wood Veneer (for top layer) (thicl<ness:3.00l/ll/I+/-10%) * 1.5670 SQM. 2. ! Pine Wood (for middle layer) 0.0188 CBM 3. Wood Veneer (for bottom layer) (Thickness: 2.20 MM +/-10%) 0.00318 CBM 4., Glue-urea formaldehyde - 0.2338 Kr 5. Modifier 0.0475 Kg 6 Hardner 0.0400 Kq 7. I Lacquer/paint (UV sealer standard, UV sealer anti abrasive, UV top coat anti scratch, UV sealer matt, UV primer, UV filler, UV hydro primer white, UV sealer colourless, UV sealer lifetime, UV sealer white, UV top coat entry scratch matt, stain binder) 0.1365 Kg 8.
Lacquer/ Varnish (colour yellow, red, white, black, blue) 0.0080 Kg DESjy fNand Lai) Consultant li < i