Fixation and modification of input and output norms
(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART1SECTION1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE & INDUSTRY DEPARTMENT OF COMMERCE PUBLIC NOTICE NO.38 (RE 03)/ 20022007 NEW DELHI : DATED : 09/01/2004. Attention is invited to Paragraph 2.4 of the Export and Import Policy 20022007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 20022007, as amended and also to the Handbook of Procedures, Vol.2, 20022007, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 20022007, as amended, the Director General of ForeignTrade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 20022007, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 20022007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below: CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl. No.A3272, new entries at Sl. No. A3273 to A3289 shall be added as per Annexure ”B” to this Public Notice.
:2: ENGINEERING PRODUCTS After the existing entry at Sl.No.C1934, new entry at Sl.No.C1935 shall be added as per Annexure “C” to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H536 , new entries at Sl.No.H537 to H543 shall be added as per Annexure “D” to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J355 , new entries at Sl.No.J356 to J357 shall be added as per Annexure “E” to this Public Notice. 5. This issues in public interest. ( L. MANSINGH ) DIRECTOR GENERAL OF FOREIGN TRADE :3: Annexure “A” to the Public Notice No. 38 Dated: 09/01/2004
AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 50 Chemicals & Allied Products Sl.No.A254 After the import item at Sl. No. 2, the following import items (with quantity) shall be added: “3. Furnace Oil 0.735 Lit/kg 4. L.D.O. 0.210 Lit/kg” 2. 153 Engineering Product Sl.No.A1168 The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A1168 Silicon Carbide Grains 1 MT 1. Silicon Carbide Crude/ Lumps (containing not less than 95% on dry basis) 1.15 MT Note : The Purity of export product shall not be lesser than the purity of import item. 3. 230 Products Sl.No.A1790 After the import item at Sl. No. 9, the following import items (with quantity) shall be added: “10.LDO/SKO 0.435 kg” :4:
236 Products Sl.No.A1837 After the import item at Sl. No. 8, the following import items (with quantity) shall be added: “9.LDO/SKO 0.216 kg” 5. 284 Products Sl.No.A2217 The quantity of import item at Sl. No. 1, shall be amended to read as under: “0.717 kg” 6. 5 Engineering Product Sl.No.A2312 (amended vide Public Notice No.31 Dated:05.11.2003) The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A2312 Zirconium Octoate 18% (Zirconium content 18%) 1 kg 1. 2Ethyl Hexanoic Acid/ Dimethyl Hexanoic Acid Octoic Acid 0.396 kg. 7. 357 Products Sl.No.A2821 After the import item at Sl. No. 3, the following import items (with quantity) shall be added: “4.LDO/SKO 0.369 kg” 8. 365 Products Sl.No.A2890 After the import item at Sl. No. 7, the following import item (with quantity) shall be added: “8. Furnace Oil 1.04 Lit/kg”
366 367 Products Sl.No.A2901 The description of export item shall be amended to read as under: “Allura Red (Food Red 17) (C.I. No. 16035” :5: 10. 368 Products Sl.No.A2913 After the import item at Sl. No. 1, the following import item (with quantity) shall added: “2. Furnace Oil 1.29 Lit/kg” 11. 12 Products Sl.No.A3028 (Amended vide Public Notice No. 37 Dated:03/10/2002) Quantity of import item at Sl. No.7, shall be amended to read as under: “1.16 kg” 12. 14 Products Sl.No.A3122 ((Amended vide Public Notice No. 54 Dated:03/01/2003) The description of import item at Sl. No. 1 &2, (with quantity) shall be amended to read as under: “1. Para Chloro Benzotrichloride 2.25 kg 2. Phenol 1.00 kg” 13. 35 Products Sl.No.A3164 (amended Vide Public The description of export item shall be corrected to read as under: “2,6 Dichloro Diphenylamine”
Notice No.03 Dated:31/03/2003) 14. 14 Products Sl.No.A3175 (Notified vide Public Notice No. 10 dated: 30/05/2003) 1. The quantity of import item at Sl. No. 6, shall be amended to read as under: “0.031 kg /kg of the export product instead of 0.30 kg” 2. The quantity of import item at Sl. No. 16 shall be amended to read as under: “0.033 kg/kg of export product instead of 0.020 kg” :6: 3. After import items at Sl. No. 16 the following additional inputs (with quantity) shall be added: “17. Refined Linseed Oil 0.088 kg/kg of export product 18. Oxy Aluminium 0.005 kg/kg Octoate of export product 15. 23 Products 1. The description of export item shall be amended to read as under:
Sl.No.A3188 (amended Vide Public Notice No.15 Dated:07/07/2003) “Bisphenol Amino Ester (Propane 2,2 Diphenyl4, 4’Bis (2Amino Phenyl1 Sulfonyloxy)” 2. The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under: “Bisphenol A” 16. 656 Engineering Product Sl.No.C820 The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed C820 S.S. Fabricated/ Welded Pipes/ Tubes 1 MT 1. Stainless Steel Plates/ Sheet/ Strips/ Wide Coils of relevant grade & specification 1.10 MT. 17. 657 658 Engineering Product Sl.No.C832 The description of export item shall be amended to read as under: “Table, Kitchen & other household article of round shape made of Stainless Steel with or without handle irrespective of what material the handle may have been made of” :7: 18. 658 Engineering Product Sl.No.C833 The description of export item shall be amended to read as under:
“Table, Kitchen & other household article made of Stainless Steel with or without handle irrespective of what material the handle may have been made of (other than those covered under C832)” 19. 8 Engineering Product Sl.No.C873 (Notified vide Public Notice No. 23 Dated:10/09/2003) The quantity of export item shall be corrected to read in “Nos.” 20. 707 710 Engineering Product Sl.No.C1059 The description of export item shall be amended to read as under: “Light Commercial Vehicle (LCV) of GVW upto 7.5 MT” 21. 710 713 Engineering Product Sl.No.C1062 The description of export item shall be amended to read as under: “Medium Commercial Vehicles GVW above 7.5 MT and upto 12 MT in CBU/SKD/CKD condition” 22. 777 Engineering Product Sl.No.C1375 The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed C1375 Machined cast Bushings of Automotive and 1 kg 1. Gun Metal / Red Brass / Leaded Bronze Ingot / 1.20 kg/kg content in the
NonAutomotive applications, Pumps and valve Copper Cathode with alloying elements Tin, Lead and Zinc export product :8: Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red Brass OR with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400 LB2, LG2, LG4/DIN 1705RG5, RG7/ ASTMB 584 or ASTMB 763C84400, C03200/C93700/SAE660 23. 872 873 Engineering Product Sl.No.C1745 The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed
C1745 Hermetically sealed compressors for air conditioner using R 22 refrigerant gas of different capacities 1 No. 1. Components 2. (a) CRNGO Steel Sheet upto 3500 Kcal/hr (b) More than 3500 Kcal/hr Net to net basis except upper and lower housing 0.0032 Kg/ Kcal 0.0024 kg/ Kcal :9: 3. (a) Copper Wire upto 3500 Kcal/hr (b) Mote than 3500 Kcal/hr 4. (a) Music Wire Upto 3500 Kcal/hr (b) More than 3500 Kcal/hr 5. (a) Refrigeration Oil Upto 3500 Kcal/ hr (b) More than 3500 Kcal/hr 6. HR non alloy steel sheet/ coils 7.EC grade aluminium ingot 0.0005 kg/k/cal 0.0004 kg/Kcal 0.000016 kg/ Kcal 0.000011 kg/ Kcal 0.0003 Ltrs/ Kcal 0.0002 Ltrs/ Kcal 1.28 KG/KG content 1.08 Kg/Kg content
873 Engineering Product Sl.No.C1746 The norm covered by this entry shall be deleted. 25. 873 874 Engineering Product Sl.No.C1747 The norm covered by this entry shall be deleted. 26. 874 Engineering Product Sl.No.C1748 The norm covered by this entry shall be deleted. :10: 27. 33 Engineering Product Sl.No.C1899 (Notified vide Public Notice No. 15 Dated:07/07/2003) After import item at Sl. No.5, the following import item (with quantity) shall be added: “6. Relevant Stainless 1.08 kg/kg Steel Sheets content in the export product” 28. 2123 Engineering Product Sl.No.C1909 (Notified vide Public Notice No. 23 Dated:10/09/2003) The description of import item at S. No. 1 (J) (without any change in under: “Ammonium Polyacrylate” 29. 2426 Engineering Product Sl.No.C1910 Notice No. 23 Dated:10/09/2003) under:
2628 Engineering Product Sl.No.C1911 Notice No. 23 Dated:10/09/2003) under: 31. 2931 Engineering Product Sl.No.C1912 Notice No. 23 Dated:10/09/2003) under: :11: 32. 3133 Engineering Product Sl.No.C1913 Notice No. 23 Dated:10/09/2003) under: 33. 3435 Engineering Product Sl.No.C1914 Notice No. 23 Dated:10/09/2003) under: 34. 3637 Engineering Product Sl.No.C1915 Notice No. 23 Dated:10/09/2003) under:
3839 Engineering Product Sl.No.C1916 Notice No. 23 Dated:10/09/2003) under: 36. 4041 Engineering Product Sl.No.C1917 Notice No. 23 Dated:10/09/2003) under: 37. 4243 Engineering Product Sl.No.C1918 Notice No. 23 Dated:10/09/2003) quantity) shall be corrected to read as under: :12: 38. 19 Engineering Product Sl.No.C1929 (Notified vide Public Notice No. 31 Dated:05/11/2003) The quantity of export item shall be amended to read in “Nos. instead of Kgs. 39. 963 Plastic Products Sl.No.H15 The Foot Note below this entry shall be deleted.
964 Plastic Products Sl. No. H24 The norms covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed H24 Articles made of HDPE/ PP twine / Rope OR Articles made of blend of HDPE&PP Twine / Ropes 1 kg 1. Relevant HDPE/PP Granules/ Chips 1.08 kg/kg content in the export product Note : 1. The relevant HDPE & PP Granules may be allowed as 1.08 kg./kg content in the export product both for exclusive Articles made of HDPE/PP Twine /Ropes and for Articles made of blended HDPE & PP Twine / Rope on the actual net content of that relevant polymer i.e. HDPE or PP in the blended export product. Note : 2. In case of coloured export items, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.06 kg/kg content in the export product. :13: 41. 9 Plastic Products Sl. No. H333 (corrected vide Public Notice No. 61 Dated:03/02/2003) The norms covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed Twine/ Rope made of HDPE/ PP 1 kg 1. Relevant HDPE/PP 1.07 kg/ Kg content in the
OR Twine/ Rope made of a blend of HDPE & PP in varying proportions Granules/ Chips export product Note: 1. The relevant HDPE &PP Granules may be allowed as 1.07 kg/kg content in the export product both for exclusive HDPE/PP Twine/ Ropes and for Twine/ Rope made of blend of HDPE & PP on the actual net content of the relevant polymer i.e. HDPE of PP in the blended Twine/ Ropes to be exported. 2.In case of export of coloured Twine/Ropes, the relevant colour Master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.05 kg/ kg content in the export product. 42. 1025 Plastic Products Sl. No. H349 The norms covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed H349 Tape / Yarn (plain Twisted) made of HDPE/PP OR Tape / 1 kg 1. Relevant HDPE/PP Granules/ Chips 1.05 kg/kg content in the export product :14: Yarn (Plain / Twisted) made of blend of HDPE & PP in varying proportions Note : 1. The relevant HDPE & PP Granules/Chips may be allowed as 1.05 kg./kg
content in the export product both for the exclusive HDPE/PP and Tape /Yarn made of blended HDPE & PP on the actual net content of that relevant polymer i.e. HDPE or PP in the blended Tape /Yarn to be exported. Note : 2. In case of export of coloured Tape / Yarn, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the relevant polymer i.e. HDPE/PP shall be reduced to 1.03 kg/kg content in the export product. 43. 1041 1042 Plastic Products Sl. No. H444 The norms covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed H444 Aseptic Packaging of Aluminium Foil of thickness less than 0.2 mm backed by Paper & LDPE with/ without Polypropylene / MPM Strips 1 MT 1. Relevant Duplex paper Board / Bleached paper/ Kraft Paper 2. Aluminium Foil 3. LDPE Granules 4. LLDPE/HDPE/MLLDPE Granules 1.10 MT/MT content in the export product 1.10 MT/MT content in the export product 1.10 MT/MT content in the export product 1.12 MT/MT content in
the export product :15: 5. Etheylene Acrylic Acid Copolymer/ Adhesive Copolymer Granules 6. Relevant Polypropylene Strips Modified Poly Metallosene Strips 7. Printing Ink 8. Photo Polymer Plates 1.12 MT/MT content in the export product Net to net 12 kgs./MT of export product 0.5 No./MT of export product 44. 10 Plastic Products Sl. No. H461 (amended vide Public Notice No. 61 Dated:03/02/2003) The norms covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed H461 Prepared adhesives based on Plastic (Two component Laminating Adhesives) Adhesive 1 kg 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6Hexane Diol 0.090 kg 0.258 kg 0.050 kg 0.195 kg 0.015 kg 0.035 kg
(Polyurethane solution containing 60% Resin content and 40% Solvent) 6. Toluene Diiso cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (Relevant) 0.400 kg :16: 45. 56 (vol2 PartI) & (v)–(vi) (Vol2 PartII) GENERAL NOTE FOR FUEL (Amended vide Public Notice No.27 Dated:06.10.2003) After Sl. No. 18 of the General Note for Fuel, the following shall be added: “19. Bras Art Wares 2% :17: Annexure “B” to the Public Notice No. 38 Dated: 09/01/2004 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A3273 Ramipril 1 kg 1. LSerine OR LSerine Methyl Ester Hcl 2. Cyclopentanone 3. Pyrolidine 4. ECPPAlanine 5.74 Kg 8.00 Kg 5.54 Kg 5.00 Kg 1.23 kg
5. 5% Palledium on Carbon 6. Di Cyclo Carbodiamide OR Propyl Phosphoric Anhydride NButyl Acetate 50% Sol 7. 1Hydroxy Benzotriazole 8. Cyclohexane/Dimethyl Formamide 9. Methanol/Di Isopropyl Ether 10.Chloroform 0.200 Kg 1.05 Kg 2.10 Kg 0.72 Kg 8.50 Kg 11.50 kg 15.00 Kg A3274 Anisyl Cyanide[(4 Mithoxyphenyl) Acetonitrile]/4 Methoxy Benzyl Cyanide 1 kg 1. pAnisaldehyde 2. Toluene 3. Sodium Cyanide 1.13 Kg 0.15 Kg 0.41 Kg :18: A3275 Indoxacarb 14.5% SC 1 kg 1. Indoxacarb (on the basis of a.i. 71.25%) 2. Soprophor BSU 3. Soprophor 3D33 4. Methyl Soyate 0.210 Kg 0.060 kg 0.090 Kg 0.598 Kg
A3276 Lannate (Methomyl 40% SP) 1 kg 1. Methomyl Tech. (a.i 98%) 2. HI SIL (SiO2) 3. Sucrose Octaacetate 4. Sun Spray Oil 5. Brilliant blue dye 0.4120 Kg 0.0600 Kg 0.0040 Kg 0.0065 Kg 0.0020 Kg A3277 Hepta Sodium Salt of Diethylene Triamine Pentamethylene Phosphonic Acid (Active Salt Content = 32%) 1 kg 1. Yellow Phosphorous 2. Diethylene Triamine 0.083 Kg 0.053 Kg A3278 Mono Chloro Benzene 1 kg 1. Benzene 0.715 Kg A3279 Het Diol (1,4,5,6,7, 7 Hexa Chloro23 Bis (Hydroxy Methyl) Bicyclo 2(2,1,1)heptane5) 1 kg 1. Hexa Chloro Cyclo Pentadiene 2. Butene Diol 3. Epichlorohydrin 4. Toluene 0.850 kg 0.270 kg 0.018 kg 0.088 kg A3280 Oryazalin technical 98% Min. 1 kg 1. Potassium4Chloro 3.5 Dinitro benzene Sulphonate 2. DiNPropyl Amine 3. Thionyl Chloride 4. Toluene 5. Ethylene Dichloride 6. Dimethyl Formamide 1.340 kg 0.490 kg 0.720 kg 0.680 kg 2.290 kg 0.116 kg :19:
A3281 Magnesium Aluminate Spinel (MAS78) (containing alumina 77 + 1% and magnesium Oxide 2223%) 1 kg 1. Magnesium calcined 2. Alumina Calcined 3. Dextrin 4. Cemgrind (mixture of high boiling alkanolamine) 0.259 kg 0.886 kg 0.019 kg 0.105 gm A3282 Biocide Navdecide AL5014 (containing Gluteraldehyde 50%=9.41%) 1 kg 1. Gluteraldehyde 50% 0.095 kg A3283 Hydroxylamine Hydrochloride 1 kg 1. Methyl Ethyl Ketoxime 2. Furnace Oil 1.46 kgm 1.10 Lit A3284 Reactive Blue 221 (Reactive Blue BRX) 1 kg 1. Cyanuric Chloride 2. NEthyl Meta Base Ester 0.187 kg 0.310 kg A3285 U.V. Curable Printing Ink – Black, Flush Route (Minimum Pigment 16.7 % + / 1%) 1 kg 1. U.V. Flush Colour – Black (Min.30% +/ 1% pigment and Min. 60% +/ 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri Propylene, Glycol 0.576 kg 0.196 kg 0.073 kg
Diacrylate/ Tri Methylol propane Tri :20: Acrylate/ Ethoxylated, Tri Methylol propane Tri Acrylate/ Di Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica /Additive 0.124 kg 0.011 kg 0.051 kg A3286 U.V. Curable Printing Ink – various colours, Flush Route (Minimum Pigment 15 % + / 1%) other than Black , Cyan, Magenta and Yellow 1 kg 1. U.V. Flush Colour – Magenta (Min.30% +/ 1% pigment and Min. 60% +/ 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri Propylene Glycol Diacrylate/ Tri 0.515 kg 0.247 kg 0.103 kg
Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/Di Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica/ Additive 0.103 kg 0.011 kg 0.051 kg :21: A3287 U.V. Curable Printing Ink – Magenta, Flush Route (Minimum Pigment 17.4% + / 1%) 1 kg 1. U.V. Flush Colour – Magenta (Min.30% +/ 1% pigment and Min. 60% +/ 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate Expoy Acrylate 3. Reactive Monomer namely, Tri Propylene Glycol Diacrylate/ Tri Methylol propane Tri 0.597 kg 0.175 kg 0.114 kg
Acrylate/ Ethoxylated Tri Methylol propane Tri Acrylate/ Di Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica/ Additive 0.082 kg 0.0106 kg 0.051 kg :22: A3288 U.V. Curable Printing Ink – Cyan , Flush Route (Minimum Pigment 14.7% + / 1%) 1 kg 1. U.V. Flush Colour – Cyan (Min.30% +/ 1% pigment and Min. 60% +/ 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate) 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri Propylene, Glycol Diacrylate/ Tri Methylol propane ,Tri 0.505 kg 0.258 kg 0.103 kg
Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/ Di Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica/ Additive 0.103 kg 0.011 kg 0.051 kg :23: A3289 U.V. Curable Printing Ink – Yellow, Flush Route (Minimum Pigment 10.2% + / 1%) 1 kg 1. U.V. Flush Colour – Cyan (Min.30% +/ 1% pigment and Min. 60% +/ 2% polyester Acrylate /Urethane Acrylate/Acrylic Acrylate/ Epoxy Acrylate) 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri Propylene Glycol Diacrylate/Tri Methylol propane Tri Acrylate/ Ethoxylated 0.351 kg 0.412 kg 0.103 kg
Tri Methylol propane Tri Acrylate/ Di Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica/ Additive 0.103 kg 0.011 kg 0.051 kg :24: Annexure “C” to the Public Notice No. 38 Dated: 09/01/2004 ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed C1935 Cast Basalt Liner Pipe 1 kg 1. Basalt Rock 1.1 Kg. :25: Annexure “D” to the Public Notice No. 38 Dated: 09/01/2004 PLASTIC PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed H537 Low Density Polyethylene (LDPE) 1 MT 1. Propane 2. Oleamide 3. Force Feed Lubricating Oil 4. LPG 5. Propylene 1421 kg 0.5 kg 1.6 kg 3.5 kg 10.0 kg H538 White Opaque BOPP Film 1 kg 1. Polypropylene Resin (Homopolymer) 2. Polypropylene Resin (Copolymer) 3. Polypropylene Based Antiblock Compound 4. Polypropylene Based Antistatic Compound 5. Polypropylene based Slip Agent compound 6. Polypropylene based Titanium compound 0.854 kg 0.133 kg 0.002 kg 0.004 kg 0.011 kg 0.196 kg H539 BOPP Film “Matte for Third Generation (MTG)”/ “Matte”/ “For Thermo Lamination” 1 kg 1. Polypropylene Resin Homo Polymer 2. Polypropylene Based Anti Block compound 3. Polypropylene Based Resin Slip Agent Compound 4. Polypropylene Based Antistatic Compound 1.051 kg 0.012 kg 0.0118 kg 0.0235 kg
:26: 5. PP Based Matte Compound (Blend of Polypropylene Copolymer and High Density Polyethylene) 6. LLDPE Resin 0.1017 kg 0.1017 kg Note : For export of “BOPP Film Matte for Third Generation (MTG)”: item no. 1,2,3,4 & 5 shall be allowed. For export of “BOPP Film Matte”: Item No. 1,2,3 & item No. 5 will be allowed as 0.1252 kg. For export of BOPP Film for ThermoLamination”: Item No. 1,2,3,4 & 6 shall be allowed. H 540 Plastic (CR 39) Ophthalmic Hard Coated/Multicoated (Antireflection)/Coloured / Edged Lenses 1 No. 1. Relevant Plastic (CR39) Ophthalmic Lenses 1.05 No. H 541 Plain Linoleum Floor Covering 3.2 mm thickness in Sheet or Tiles Form with coating weight of 366 + 3% kg/100 Sq.mtr. 100 Sq.Mtr. 1. Wood Powder 2. Linseed Oil 3. Gum Rosin 4. Copal Gum 5. Titanium Dioxide 6. Cork Powder 7. Necires 60.94 kgs 124.32 kgs 23.86 kgs 2.38 kgs 2.4 kgs 47.8 kgs 1.18 kgs H 542 Additive (Poly Isocyanate Solution containing 50% Solid and 50% Solvent) 1 kg 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6Hexane Diol 0.012 kg 0.037 kg 0.032 kg 0.060 kg. 0.002 kg
6. Toluene Diiso cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (Relevant) 0.372 kg 0.500 kg. :27: H543 Additive (Polyester Solution containing 50% Resin content and 50% Ethyl Acetate) 1 kg 1. Adipic Acid 2. Diethylene Glycol 3. Ethyl Acetate 0.385 kg 0.165 kg 0.500 kg. :28: Annexure “E” to the Public Notice No. 38 Dated: 09/01/2004 TEXTILE PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed J356 Cotton Duster (Fabric) 1 kg 1. Cotton Waste (Motes) excluding the waste extracted at / produced by Carding, Draw frame, Comber, Speed frame and 1.90 kg
Ring frame stages of conversion of raw cotton from fibre to yarn. J357 Cotton Duster (Madeups) 1 kg 1. Cotton Waste (Motes) excluding the waste extracted at / produced by Carding, Draw frame, Comber, Speed frame and Ring frame stages of conversion of raw cotton from fibre to yarn. 1.94 kg
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.