Amendment/ Addition in SION
(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART1SECTION1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE & INDUSTRY DEPARTMENT OF COMMERCE PUBLIC NOTICE NO. 37 (RE 02)/ 20022007 NEW DELHI : DATED : 03/10/2002. Attention is invited to Paragraph 2.4 of the Export and Import Policy 20022007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 20022007, as amended and also to the Handbook of Procedures, Vol.2, 20022007, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 20022007, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 20022007, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 20022007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below: CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A3016, the new entries at Sl.No.A3017 to A3034 shall be added as per Annexure ”B” to this Public Notice.
:2: ENGINEERING PRODUCTS After the existing entry at Sl.No.C1798, the new entries at Sl.No.C1799 to C1809 shall be added as per Annexure ”C” to this Public Notice. MISCELLANEOUS PRODUCTS After the existing entry at Sl.No.K152, the new entries at Sl.No.K153 to K154 shall be added as per Annexure ”D” to this Public Notice. 5. This issues in public interest. ( L. MANSINGH) DIRECTOR GENERAL OF FOREIGN TRADE (R. C. SAINI) DY. DIRECTOR GENERAL OF FOREIGN TRADE FOR DIRECTOR GENERAL OF FOREIGN TRADE :3:
Annexure “A” to the Public Notice No. 37 Dated: 03/10/2002 AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 197 Chemicals & Allied Products Sl.No.A1640 The norm covered by this entry shall be substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A1640 Monoceotophos 40% WSC (Monocotophos 40% SL) 1 kg 1. Mono methyl Aceto Acetamide 70% min. (MMAA) 2. Trimethyl Phosphite OR 2(a)Yellow/White Phophorus 2(b)Methanol 3. Methanol (as solvent) OR Ethylene Dichloride 4. Cyclohexanone 0.432 kg 0.356 kg 0.128 kg 0.355 kg 0.179 kg 0.120 kg 0.412 kg
:4: 2. 241 Chemicals & Allied Products Sl.No.A1875 substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A1875 Upgraded Beneficiated (Synthetic Rutile) containing Titanium Dioxide 95% 1 kg 1. Ilmenite Ore containing Titanium Dioxide 54% 2. Coke 2.0 kg 0.182 kg 3. 267 Chemicals & Allied Products Sl.No.A2101 substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A2101 Metoprolol Tartrate 1 kg 1. 4Methoxy Ethyl Phenol 2. Epichlorohydrin 3. Mono isopropyl Amine 4. Tartaric Acid 0.77 kg 0.70 kg 1.50 kg 0.24 kg
45 Chemicals & Allied Products Sl.No.A2030 (as amended vide Public Notice No. 27 Dated:01.08.2002) substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed A2030 Phenidone A (1 phenyl, 3 Pyrazolidone) 1 kg 1. Phenyl Hydrazine OR a) Aniline b) Sodium Nitrite 2. Acrylamide 3. Caustic Soda 4. Isopropyl Alcohol 1.124 kg 1.137 kg 0.830 kg 1.0 kg 1.15 kg 1.00 kg :5: 5. 482 Engineering Product Sl.No.C27 The quantity of import item at. Sl. No. 1 shall be amended to read as under: “1. Aluminium Scrap 1.10 MT/MT of Aluminium content in the OR export product Aluminium Ingot 1.06 MT/MT of Aluminium content in the export product 6. 705 Engineering Product Sl.No.C1052 substituted by the following:
Sl.No. Export Item Qty. Import Item Qty. Allowed C1052 Inlet/ Exhaust Valves 1 kg 1. Valve Steel (Alloy Steel/ NonAlloy Steel) Bars OR Inconel Alloy 75 1 Bars 2. Hard Facing Metal Alloy Powder of Grade Ni60, Stellite 1, 6 and 12 1.40 kg/kg content in the export product 1.20 kg/kg content in the export product 10 gms/valve 7. 705 Engineering Product Sl.No.C1053 deleted. :6: 8. 746 Engineering Product Sl.No.C1214 The description of export item shall be amended to read as under: “Valve Stems made of Brass” 9. 766 Engineering Product Sl.No.C1341 deleted.
780 Engineering Product Sl.No.C1382 The description of export item shall be amended to read as under: “Armoured / Unarmoured PVC Insulated Submersible/Flexible / Control Purpose Copper Cable rating upto 1100 volts, not elsewhere specified” 11. 781 Engineering Product Sl.No.C1390 substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed C1390 Aluminium Gravity Die Cast Articles 1 MT 1. Aluminium Scrap OR Aluminium Ingots 1.10 MT/MT content of Aluminium in export product 1.06 MT/MT content of Aluminium in export product :7: 12. 851 Engineering Product Sl.No.C1661 After the description of import item at Sl. No. 4, (with quantity) the following new import item shall be added:
“5. Relevant Screw 1 No. on net to net basis” 13. 24 Engineering Product Sl.No.C1784 (amended vide Public Notice No. 20 Dated:01/07/2002) substituted by the following: Sl.No. Export Item Qty. Import Item Qty. Allowed C1784 Pest Repellent Model POBD101 1 No. 1. Relevant Capacitor 2. Relevant Varistor 3. Relevant Triac 4. Relevant Resistors 5. Zinner 6. Light Connector 7. EL Display 8. Polycarbonate Compound 9. Copper Wire (Super Enamelled) 10. Copper Clad Laminates Net to net Net to net Net to net Net to net 1 No. (Net to net) 1 No. (Net to net) 1 No. (Net to net) 1.05 kg/kg content in the export product 0.17 kg/kg content in the export product 1.01 kg/kg content in the export product :8:
11. Imaging/ Photo printing Dry Film Photo resists 12. Solder Mask Inkcum Catalyst/ Hardner 13. Relevant Microchip 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1 No. 14. 907 Food Product Sl.No.E11 The description of export item shall be amended to read as under: “Fruit Slices and other edible products/ Chutneys/Condiment Paste/Vegetables/ Pickles packed in OTS Cans / Glass containers/ packed in relevant packing material” 15. 1015 Plastic Products Sl.No.H304 The description of import items at Sl. Nos. 1 & 2, (without any change in quantity) shall be amended to read as under: “1. Spectacle Front of relevant Brand / make with or without metal fittings 2. Spectacle Sides of relevant Brand / make with or without noted fittings” 16. 33 Plastic Products Sl.No.H507 (as notified vide Public Notice No. 20 Dated:01/07/2002) 1. The description of export item shall be amended to read as under: “Fragrant & Designed Polypropylene Mat” 2. The quantity of import item at Sl. No. 4 shall be amended to read as under:
“94 kgs and cif value upto 20% of FOB value of export” 3. The quantity of import item at Sl. No. 6 shall be amended to read as under: “2 Nos.” :9: 17. 34 Textile Products Sl. No. J353 (As corrected vide Public Notice No. 20 Dated:01.07.2002) The quantity of import item at Sl. No. 2, shall be corrected to read as under: “1.05 kg/kg content in the export product” 18. 1123 Miscellaneous Products Sl.No.K32 deleted. 19. 1136 Miscellaneous Products Sl.No.K103 The description of export item shall be amended to read as under: “Absorbent Cotton Wool B.P.C./B.P./I.P.” 20. 1137 Miscellaneous Products Sl.No.K107 The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under: “Polymethyl Metha Acrylate Sheet (Thickness upto 3.00 mm)”
:10: Annexure “B” to the Public Notice No. 37 Dated: 03/10/2002 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A3017 Penta Adipate Stearate 1 kg 1. Penta Erythritol 2. Adipic Acid 3. Stearic Acid 0.198 kg 0.217 kg 0.800 kg A3018 Farmazan Base 1 kg 1. Ortho Amino Phenol 2. Ortho Nitro Toluene 3. Copper Sulphate (Penta Hydrate) 4. Benzaldehyde 0.614 kg 1.361 kg 0.614 kg 0.334 kg A3019 Para Chloro 1 kg 1. Para Chloro Toluene 1.550 kg
Benzaldehyde (4 Chloro Benzaldehyde) A3020 1, 3Dibromo5, 5 Dimethyl Hydantoin 1 kg 2. 5,5 Dimethyl Hydantion 3. Liquid Bromine 0.526 kg 0.621 kg A3021 Alpha Terpeniol perfumery grade minimum purity 99% 1 kg 1. Gum Terpentine containing Alpha Pinene 82.5% OR Alpha Pinene 0.17 kg 1.608 kg A3022 Alpha Terpenyl Acetate perfumery grade minimum purity 99% 1 kg 1. Alpha Pinene OR Gum Terpentine Oil content 82.5% of Alpha Pinene 0.17 kg 1.825 kg :11: A3023 Amber Fleur (2,3,8,8 – Tetramethyl – 1 to 8 – Octahydro – 2 – Naphthalenyl Mehtyl Ketone) 1 kg 1. Beta Pinene 2. Methyl Ethyl Ketone 0.17 kg 0.650 kg A3024 Acrylic Polymers in primary form 1 kg 1. Acrylamide 2. Dimethyl Aminoethyl 0.339 kg 0.029 kg
(RAN1000) (solid content 36+/3%) Methaacrylate 3. Emulsifier 4. Solvent Oil (Paraffinic) 0.062 kg 0.236 kg A3025 Diphenyl Methane 1 kg 1. Benzene 2. Benzyl Chloride 3. Aluminium Chloride 0.516 kg 0.837 kg 0.120 kg A3026 3 Chloro Methyl Pyridine HCL 1 kg 1. 3 Pyridine Methanol 0.740 kg A3027 Pigmented Chips 1 kg 1. Relevant Resin such as Nitro Cellulose Resin/ Polyamide Resin/ Vinyl Resin/ Acrylic Resin 2. Relevant Organic/ Inorganic Pigments 3. Relevant Platisiazer such as Dibutyl Phthalate / Acetyl Tributyl Citrate/ D.O.P/ Centisizer/ Epoxidised Soya Oil 4. Solvent i.e. Ethyl Acetate/ Toluene/ IPA/MEK 0.17 kg/kg content in the export product 0.17 kg/kg content in the export product 0.17 kg/kg content in the export product 0.20 kg :12:
A3028 Tinted Float Glass 1 MT 1. Soda Ash 2. Sodium Sulphate 3. Silica Sand 4. Dolomite 5. Feldspar 6. Iron Oxide 7. Sodium Nitrate 8. Nickel Oxide 9. Cobalt Oxide 10.Sodium Selenite OR Selenium 11.Slag 12.PMMA 13.LSHS/Furnace Oil 275 kg 11 kg 909 kg 224.9 kg 60 kg 2 kg 0.17 kg 0.621 kg 0.17 kg 0.14 kg 0.00756 kg 4 kg 0.0469 kg 266.73 kg A3029 Art Paper Coated One Side 1 MT 1. Wood Pulp 2. Calcium Carbonate 3. Latex (50% concentration) 4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) 5. Coating Chemicals (Carboxyl Methyl 0.8587 MT 0.2325 MT 0.0520 MT 0.0558 MT 0.01356 MT
Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant :13: 6. Stretch Film 7. Poly Kraft Paper As per packing Policy As per packing Policy A3030 Art Paper (Coated (2 Side Coated Art Paper) 1 MT 1. Wood Pulp 2. Calcium Carbonate 3. Latex (50% concentration) 4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) 5. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl 0.8100 MT 0.3351 MT 0.0774 MT 0.0740 MT 0.0194 MT
Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant) 6. Stretch Film 7. Poly Kraft paper As per packing Policy As per packing Policy :14: A3031 Uncoated Paper 1 MT 1. Wood Pulp 2. Calcium Carbonate 3. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) 4. Stretch Film 0.9164 MT 0.0973 MT 0.0752 MT As per packing Policy
5. Poly Kraft paper As per packing Policy A3032 1/S Coated Art Board 1 MT 1. Wood Pulp 2. Calcium Carbonate 3. Clay 4. Latex (50% concentration) 5. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch) 0.925 MT 0.117 MT 0.033 MT 0.021 MT 0.047 MT :15: 6. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical 0.017 MT
Brightening Agent, Dispersant) 7. Stretch Film 8. Poly Kraft Paper as per packing policy as per packing policy A3033 Viral Vaccines 1000000 Doses 1. Minimum essential medium (MEM) and Foetal Calf Serum (Foetal Bovine Serum) 2. Miscellaneous Chemicals for Viral Vaccine production such as DSorbitol Gelatine Food Grade, Lactalabumin Hydrolysate, L Alanine, L Arginine, L Histadine, Tricine Soyabean Casein Digest Media Trypsin, L Glutamine 531.57 Ltr. upto 1.5% of FOB value of exports
:16: 3. Consumables, such as Disposable Plastics Wares, Glasswares, Filters and Filter Aids, Testing Kits, SPF Eggs (Specific Pathogen Free Enggs) Media Bags and Accessories, Sterilisation Indicators 4. Packing Materials: (i) Aluminium Caps/ Seals (ii) Cold Chain Monitor Cards (iii) Glass Ampoules/ Sterile Water for Injection (iv) Glass Vials (v) Monitor Mark Dual Temp, Indicating Tag 891 Nos. Net +10% wastage 1215 Nos. Net+15% Wastage Net+15% Wastage 1215 Nos. 5. Rubber Stoppers 6. Corrugated Boxes Net+10% Wastage 1167 Nos. 1167 Nos.
7. Thermo Cole Boxes (EPS Boxes) :17: A3034 Bacterial Vaccines 1000000 Doses 1. Consumables such as Disposable Plasticwares, Glass wares, Filters and Filter Aids 2. Miscellaneous Chemicals for Bacterial Vaccine Production such as Aluminum Phosphate Gel, Thiomersal, Aluminium Chloride6 Hydrate, Casamino Acid, Dextrose, Sodium Chloride, Sodium Hydroxide, Soyabean Casein Digest Media, Tri 212 Nos. upto 4% of FOB value of exports
Sodium Ortho Phosphate, Tryptone T, Ammonium Sulphate, Fluid Thioglycollate Medium 3. Packing Materials: 1. Aluminium Caps/ Seals 2. Cold Chain Monitor Cards/Monitor Marks, Dual Temp. Indicating Tags/ Shipping Indicators Net +10% wastage 350 Nos. :18: 3. Glass Ampoules/ Sterile Water for Injection 4. Glass Vials 5. Rubber Stoppers 6. Corrugated Boxes 7. Thermo Cole Boxes (EPS Boxes) Net+15% Wastage }Net+15% }Wastage Net+10% Wastage 525 Nos. 525 Nos.
:19: Annexure “C” to the Public Notice No. 37 Dated: 03/10/2002
ENGINEERING PRODUCTS Sl. No. Export Item Qty. Import Item Qty. Allowed C1799 Cylindrical Air Intake Filter/ Pulse Jet Air Filter 1 No. 1. Relevant Filter Paper 1.02 kg/kg content in the export product C1800 Non – Aerosol Spray Pump / dispensers 1 No. 1. Relevant Module Sub. Assembly 2. Relevant Actuator Assembly Net to net Net to net Note : The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No. if any) etc. of the components sought for import should confirm to those utilise in the manufacturer of the resultant product. C1801 Dumet wire (Copper tube filled with Alloy Steel and Nickel) 1 kg 1. Nickel Cathodes and / or Nickel Pellets – containing approx. 99.9%(min.) Nickel contents 2. High Conductivity Copper Tube containing approx. 99.9% (min.) Copper contents 1.02 kg/kg content in export product 1.01 kg/kg content in export product
:20: C1802 Stainless Steel Ballpen Tips 1 Million Nos. 1. Stainless Steel Wire dia 2.3 mm of relevant grade 2. Tungsten Carbide Balls 3. Cutting Oil, Cleaning Oil – Trichloroethylene, Cutting Tools 2.30 kg/kg content in the export product 1.02 Millions 4% of FOB value C1803 Sulphur Cored Wire 1 kg 1. Sulphur Granules S:99% Min. Size: 0 to 2 mm 2. CRCA Steel Strips Grade: EDD Width 58 mm 1.015 kg/kg of Sulphur Granule content in export product 1.010 kg/kg of CRCA content in export product C1804 Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/ A.I. Equipment/ Cryogenic Containier / Cryoseal Liquid Nitrogen 1 No. 1. Cold Rold Aluminium Sheet in Coil & Non Coil Form 2. Pallodium Oxide Anhydrous 3. Molecular Sleve 4. Non Woven Cryogenic Insulation 1.10 kg/kg content in export product Net to net Net to net 1.05 kg/kg content in
Container made of Aluminium Fabric export product :21: 5. Aluminium Foil 6. Adhesive – Crest 7. Adhesive – Ciba 8. Consumables (Welding Wire, Welding Flux & Welding Rods) 9. FRP Neck Tubes 1.02 kg/kg content in export product { { { 5% of FOB { { { Net to net C1805 High Speed Steel (Cobalt Grade) End Mills Dia 1 mm to 20 mm 1 kg 1. High Speed Steel (Cobalt Grade) in the form of Coils/ Bars/Rods of Diameter 7 mm to 23 mm 1.50 kg C1806 Electrolytic Tinplate Waste/ waste printed / lacquered unprinted sheets cut to size for making components of 1 kg 1. Unprinted /Unlaquered Electrolytic Tinplate Waste / Waste Coil/Sheet 1 kg
round tin cans other than OTS cans C1807 Long Life Lamps (0 150 watts) life 16,000 hours to 20,000 hours) 1000 Nos. 1. 90% Krypton Gas Bal Nitrogen 2. Glass Shells/ Glass Envelopes 3. Brass Caps 4. B701 Halogen Tungsten Wire (upto 30 mg) 116 Litres at 1 Bar or 0.58 Litre at 200 Bar 1150 Nos. 1010 Nos. 910 Mtrs. :22: 5. Lead in wire (Ballotiny filled) 6. Getter (P3L5) 7. K18 Lamp Copping Cement 8. Getter (ALZR) 9. Marking Ink 1010 Nos. 0.045 Litres 1.55 kg 0.030 Litres 8.750 Grams C1808 Dish Ends (Ellipsoidal or Circular Shape) made of Non Alloy Steel Plates 1 kgs. 1. NonAlloy Steel Plates SA 516/515 1.1 kg/kg content of Steel Plate in the export product C1809 Pressure Die Cast Zinc Aluminium Alloy Builders Hardware 1 MT 1. Zinc Ingot (High Grade Special 99.995% purity) 1.12 kg/kg content of Zinc
Lacquered/ Powder Coated 2. Cylinders with or without key(s) 3. Plastic Chips for Plastic component such as washers key holders etc. Polyamite 66/ Nylon66/ Polyamite6 / Nylon6/ Polyacetal/ Delrin/ Polyoxymethylene 4. Machine Screws 5. Berlaclear CT Laquer/ Albrilac HB (for Electrophoretic Lacquer) OR (a) Polyester Powder for coating in export product Net to net 1.05 kg/kg content in export product Net to net | | | | | | | | :23: (b)Solvent for Electrophoretic Lacquer a. Rinse additive for Electrophoretic Lacquer 6. Abrasive Belt 50 mm x 3500 mm for grinding | | | | | | Import item | No. 5 to 11
7. Abrasive Belt 150 mm x 2000 mm for grinding 8. Liquid polishing compound for polishing Rough Finish 9. Trichloro Ethylene for degreasing | upto 6% of | FOB value | | | | | | | | | 10.Bar Polishing compound Final Finish (Pre polishing compound, polishing compound Finishing compound) 11.Polishing Buffs (Pre polishing Buffs, Polishing Buffs, Finishing Buffs | | | | | | | | | | :24:
Annexure “D” to the Public Notice No. 37 Dated: 03/10/2002 MISCELLANEOUS PRODUCTS Sl. No. Export Item Qty. Import Item Qty. Allowed K153 Sheet Metal Toys 1 kg (b) Metal Sheet (iron Sheet coated with Tin) having a thickness equal to or less than 0.5 mm 1.10 kg/kg content of relevant metal sheet in export product K154 Wooden Toys 1 kg 1. Wood (Rubber Wood / Pine Wood) in log form 1.30 kg/kg content of relevant wood in export product
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.