Fixation and modification of input output norms
(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART1SECTION1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE & INDUSTRY DEPARTMENT OF COMMERCE PUBLIC NOTICE NO. 74 (RE2001)/19972002 NEW DELHI : DATED : 28/03/2002. Attention is invited to Paragraph 4.11 of the Export and Import Policy 19972002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 19972002, as amended and also to the Handbook of Procedures, Vol.2, 19972002, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 19972002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 19972002, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 19972002, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below: CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A2834, the new entries at Sl.No.A2835 to A2975 shall be added as per Annexure ”B” to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C1764, the new entries at Sl.No.C1765 to C1767 shall be added as per Annexure ”C” to this Public Notice. This issues in public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE (B.GANGAR) DY. DIRECTOR GENERAL OF FOREIGN TRADE FOR DIRECTOR GENERAL OF FOREIGN TRADE :2:
Annexure “A” to the Public Notice No. 74 Dated: 28/03/2002 AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 9297 Chemicals & Allied Products Sl. No. A 30, A98, A102, A104, A143, A213, A434, A824, A1217,A1227, A1229, A1246, A1263, A1264, A1304, A1354, A1490, A1528, A1588, A1717, A1743, A1997, A2002, A2209, A2216 The notes below these Sl. Nos shall be deleted. 2. 19 Chemicals & Allied Products Sl.No.A83 The note below this norm shall be deleted. 3. 34 Chemicals & Allied Products Sl.No.A169 1. The note below this norm shall be deleted. 2. The description of import item at Sl. No. 1 shall be amended to read as under: “Relevant Chemicals with specific name”
:3: 4. 5253 Chemicals & Allied Products Sl.No.A311, A312 & A313 The notes below these norms shall be deleted. 5. 58 Chemicals & Allied Products Sl.No.A351 The note below this norm shall be deleted. 6. 107 Chemicals & Allied Products Sl.No.A763 The description of export item shall be amended to read as under: “Optical Brightener C.1 Fluorescent Brightener – 220 (Assay 82%)” 7. 142 Chemicals & Allied Products Sl.No.A1026 1. The note below this norm shall be deleted. 2. Import item at Sl. No. 3, (with quantity) shall be substituted by the following: “3. Frits 1.30 gms/Sq.Mtr. OR Raw Materials for frits (a) Cobalt Oxide 0.625 MT (b) Borex Penta 50.000 MT Hydrate (c) Boric Acid 5.000 MT (d) Zirconium 1.875 MT Oxide
:4: 8. 14243 Chemicals & Allied Products Sl.No.A1028 1. The note below this norm shall be deleted. 2. Import item at Sl. No. 3, (with quantity) shall be substituted by the following: “3. Frits 290 gms/Sq.Mtr. OR Raw Materials for frits (a) Cobalt Oxide 0.625 MT (b) Borex Penta 50 MT Hydrate (c) Boric Acid 5 MT (d) Zirconium 1.875 MT Oxide 9. 146 Chemicals & Allied Products Sl.No.A1050 Import item at Sl. No. 4, (with quantity) shall be substituted by the following: “4. Relevant Packing Bags Net to Net OR Paper Bags Net+2%” 10. 155 Chemicals & Allied Products 1. The note below this norm shall be deleted.
Sl.No.A1168 2. The description of export item shall be “Silicon Carbide Grains having purity more than 95%” 11. 155 Chemicals & Allied Products Sl.No.A1169 12. 155 Chemicals & Allied Products Sl.No.A1173 :5: 13. 17071 Chemicals & Allied Products Sl.No.A1376 The description of export item shall be “Linear Alkyl Benzene” 14. 171 Chemicals & Allied Products Sl.No.A1377 The description of export item shall be “Linear Alkyl Benzene” 15. 185 186 Chemicals & Allied Products Sl.No.A1535 to 1538 The note below these norms shall be deleted. 16. 194 Chemicals & Allied Products
Sl.No.A1586 17. 195 Chemicals & Allied Products Sl.No.A1594 18. 200 Chemicals & Allied Products Sl.No.A1634 19. 204 Chemicals & Allied Products Sl.No.A1663 Both the notes below this norm shall be deleted. 20. 204 Chemicals & Allied Products Sl.No.A1664 21. 205 206 Chemicals & Allied Products Sl.No.A1666 The notes at Sl. Nos. 1, 6, & 7 below this norm shall be deleted. :6: 22. 206 207 Chemicals & Allied Products Sl.No.A1667 The notes at Sl. Nos. 1, 2, 3 & 5 below this norm shall be deleted. 23. 207 Chemicals & Allied Products Sl.No.A1668
207 208 Chemicals & Allied Products Sl.No.A1669 1. The note at Sl. No. 1 & 2 below this norm shall be deleted. 2. The quantity of export item shall be “1 kg (excluding the weight of valve)” 25. 208 Chemicals & Allied Products Sl.No.A1670 Both the notes below this norm shall be deleted. 26. 208 209 Chemicals & Allied Products Sl.No.A1671 1. The note at Sl. No. 1 below this norm shall be deleted. 2. Import item at Sl. No. 1 (with quantity) shall be substituted by the following: “1. a) Natural Rubber 46.00 kgs b) Synthetic Rubber 9.00 kg” (PBR/SBR – 1502/ 1712) 27. 209 Chemicals & Allied Products Sl.No.A1672 The notes below this norm shall be deleted. 28. 209 Chemicals & Allied Products Sl.No.A1673 2. The quantity of export item shall be “1 kg (excluding the weight of valve)” :7:
209 Chemicals & Allied Products Sl.No.A1674 30. 210 Chemicals & Allied Products Sl.No.A1677 Both the notes below this norm shall be deleted. 31. 212 213 Chemicals & Allied Products Sl.No.A1684 1. All the notes below this norm shall be deleted. 2. Import item at Sl. No. 2 (with quantity) “2. a) Natural Rubber 0.24 kg/kg content of Rubber compound in export product b) Relevant Synthetic 0.36 kg/kg RubberSBR (1502/ content 1712)/ Polychloro of Rubber prene Rubber compound in export product” 32. 213 Chemicals & Allied Products Sl.No.A1685
:8: 33. 213 214 Chemicals & Allied Products Sl.No.A1686 1. Both the notes below this norm shall be deleted. 2. The import item at Sl. No. 1 (with quantity) “1. a) Natural Rubber 39.73 kgs b) Synthetic Rubber 7.87 kg (SBR1502/1712)/ PBR c) V.P. Latex 0.13 kg” 34. 214 Chemicals & Allied Products Sl.No.A1687 1. Both the notes below this norm shall be deleted. 2. The import item at Sl. No. 3 shall be amended (without any change of quantity) to read as under: “3. Bonding agent for Metal bonded part”. 35. 215 216 Chemicals & Allied Products Sl.No.A1688 Both the notes below this norm shall be deleted. 36. 215 216 Chemicals & Allied Products Sl.No.A1691 1. All the notes below this norm shall be deleted. 2. Import item at Sl. No. 1, with quantity, shall be amended to read as under:
“1. a) Natural Rubber 35 kg b) Synthetic Rubber 9 kg” (PBR/SBR1502/ 1712) :9: 37. 216 Chemicals & Allied Products Sl.No.A1692 Both the notes below this norm shall be deleted. 38. 217 Chemicals & Allied Products Sl.No.A1700 1. Both the notes below this norm shall be deleted. 2. The description of import item at Sl. No. 9, shall be amended (without any change in quantity) to read as under: “Relevant Synthetic Resin” 39. 217 218 Chemicals & Allied Products Sl.No.A1701 1. Both the notes below this norm shall be deleted. 2. The import item at Sl. No. 1, with quantity “1. a)Natural/Synthetic 0.41 kg Rubber SBR1502/
b)PBR 0.17 kg” 40. 218 Chemicals & Allied Products Sl.No.A1704 All the notes below this norm shall be deleted. 41. 219 Chemicals & Allied Products Sl.No.A1709 42. 219 220 Chemicals & Allied Products Sl.No.A1710 :10: 43. 220 Chemicals & Allied Products Sl.No.A1712 Both the notes below this norms shall be deleted. 44. 221 Chemicals & Allied Products Sl.No.A1717 1. All the notes below this norm shall be deleted. 2. The import item at Sl. No. 1(b) with quantity shall be amended to read as under: “1(b). Synthetic Rubber 25.63 kgs (SBR1502/1712)/ PBR
(c) V. P. Latex 0.097 kg” 45. 222 Chemicals & Allied Products Sl.No.A1721 1. All the notes below this norm shall be deleted. 2. The quantity of import item at Sl. No. 7 & 8 “7. 1.05 kg/kg content in export 8. 1.05 kg/kg content in export” 46. 223 Chemicals & Allied Products Sl.No.A1722 All the foot notes below this norm shall be deleted. 47. 223 224 Chemicals & Allied Products Sl.No.A1723 The notes No. 1 & 2, below this norm shall be deleted. 48. 224, 225, 226& 228 Chemicals & Allied Products Sl.No.A1725, A1728, A1729, A1738 The notes below these norms shall be deleted. :11: 49. 229 Chemicals & Allied Products Sl.No.A1742 1. The notes No. 1 & 2, below this norm shall be deleted. 2. The quantity of Sl. No. 7, shall be amended to read as under:
“0.010 kg (value restricted to 3% of FOB value of export” 50. 230 231 Chemicals & Allied Products Sl.No.A1747 1. The note Nos. 1 & 2, below this norm shall be deleted. 2. The quantity of import items at Sl. Nos. 13 to 17 shall be amended to read as under: “1.05 kg/kg content in export” 51. 231 Chemicals & Allied Products Sl.No.A1748 1. The note Nos. 1 & 2, below this norm shall be deleted. 2. The quantity of import items at Sl. Nos. 13 to 17 shall be amended to read as under: “1.05 kg/kg content in export” 52. 234 235 Chemicals & Allied Products Sl.No.A1758 2. The quantity of import item at Sl. No. 5, “1.02 Sq.Mtr./Sq.Mtr. content in export” 53. 235 Chemicals & Allied Products Sl.No.A1759, A1760 1. The notes below these norms shall be deleted. 2. The quantity of import item No. 4 shall be “(value restricted to 10% of FOB value of export).” :12: 54. 238 Chemicals & Allied 1. The note below this norm shall be deleted.
Products Sl.No.A1778 2. The import item at Sl. No. 2, with quantity “2. Linear Unsaturated 4.7 kgs Polyester Resin OR Styrene Acrylic 4.7 kgs” Copolymer other than ABS/ SAN Resin 55. 240, 244& 252 253 Chemicals & Allied Products Sl.No.A1788, A1818, A1874 The notes below these norms shall be deleted. 56. 241 242 Chemicals & Allied Products Sl.No. A1802 57. 252 Chemicals & Allied Products Sl.No. A1871 58. 253 Chemicals & Allied Products Sl.No. A1877 59. 253 254 Chemicals & Allied Products Sl.No.A1878, A1878, A1880, A1881 The notes below these norms shall be deleted.
:13: 60. 263 Chemicals & Allied Products Sl.No. A1968 2. The quantity of import item at Sl. No. 4, “0.015 kg (value limited to 15% of FOB valueof export)” 61. 27071 Chemicals & Allied Products Sl.No. A2024 62. 274 Chemicals & Allied Products Sl.No. A2057 The notes below this norm shall be deleted. 63. 275 Chemicals & Allied Products Sl.No. A2062 Note Nos. 1 & 2, below this norm shall be deleted. 64. 27980 Chemicals & Allied Products Sl.No. A2099 65. 280 Chemicals & Allied Products Sl.No. A2102 66. 280 Chemicals & Allied
Products Sl.No. A2103 2. At the end of description of import item at Sl. No. 1, the following shall be added: “(for decorative Mug only)”. 67. 287 Chemicals & Allied Products Sl.No.A2141 :14: 68. 289 Chemicals & Allied Products Sl.No.A2157 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR Methanol 0.149 kg” 69. 290 Chemicals & Allied Products Sl.No.A2170 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR Methanol 0.274 kg” 70. 296 Chemicals & Allied Products Sl.No.A2213 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR Methanol 0.208 kg” 71. 296 Chemicals & Allied Products Sl.No.A2214 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR
Methanol 0.246 kg” 72. 31516 Chemicals & Allied Products Sl.No. A2361 All the notes below this norm shall be deleted. 73. 318 Chemicals & Allied Products Sl.No. A2377 The note below this norm shall be deleted. 74. 11 Chemicals & Allied Products Sl.No. A2474 The note below this norm shall be deleted. :15: 75. 15 Chemicals & Allied Products Sl.No. A2478 1. The note below this entry shall be deleted. 2. The description of export item shall be “Rubber Backed/ Embedded Coir Mat, Matting/ Rugs/Carpets made out of relevant rubber” 76. 19 Chemicals & Allied Products Sl.No. A2499 The note below this entry shall be deleted. 77. 20 Chemicals & Allied Products Sl.No. A2501 The note below this entry shall be deleted.
47 Chemicals & Allied Products Sl.No. A2652 The note below this entry shall be deleted. 79. 78 Chemicals & Allied Products Sl.No. A2691, A2692 & A2693 The existing note under each of these norms shall be substituted by the following note: “Note: this norm is valid up to 30.09.2002.” 80. 18 Chemicals & Allied Products Sl.No. A2713 1. The note below this entry shall be deleted. 2. The description of export product shall be “Nylon Skin wall chafer bicycle tyre having weight of each tyre not exceeding 580 gms +/ 2% fitted with reflective tape.” :16: 81. 17 Chemicals & Allied Products Sl.No. A2710 The description of export item shall be “N Benzyl J Acid” 82. 17 Chemicals & Allied Products The description of export item shall be
Sl.No. A2712 “Para Cresidine6Methane Sulfonamide (6PCMS)” 83. 15 Chemicals & Allied Products Sl.No.A2733 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR Methanol 0.100 kg” 84. 13 Chemicals & Allied Products Sl.No.A2743 In import item at Sl. No. 2 the following alternative import item (with quantity) shall be added: “OR Methanol 225.5 kg” 85. Chemicals & Allied Products Sl.No. A1767, A2202, A2324, A2360, A2379, A2380, A2383, A2384, A2413, A2414, A2421, A2424, A2425, A2436, A2437, The norms covered by these entries shall be shifted to Plastic Group. :17: A2446,A2456, A2457, A2464, A2519, A2520,
A2521, A2525, A2527, A2531, A2534, A2556, A2661, A2667, A2672, A2706, A2718, A2750, A2751, A2752, A2753, A2754, A2820. 86. 398 Electronics Products Sl.No.B105 The description of import item at Sl. No. 1 the alternative import item shall be added (with quantity) as under: “OR 1(a) Panel 112 Nos. (b) Funnel 112 Nos.” 87. 507 Engineering Products Sl.No.C397 1. After import item at Sl. No.3, under the heading (a) H.E. Alloys, the following additional import items (with quantity) shall be added: “4. Relevant grade of 1.10 kg per kg Stainless Steel content in the Export Product 5. Nickel 1.10 kg per kg content in the export product 6. Copper 1.10 kg per kg content in the export”
:18: 2. After import item at Sl. No.2 under the heading (b) L.E. Alloys, the following additional import item (with quantity) shall be added: “3. Alloy with 48% 1.10 kg per kg Nickel and balance content in the Ferrows export Product” 88. 512 Engineering Product Sl.No.C421 The description of import item at Sl. No. 2 shall be amended (with quantity) to read as under: “2. Flute Grinding Diamond Upto 5% of Wheels Marking Solution overall FOB and Ultrasonic Solution value of export ” 89. 568 Engineering Products Sl.No.C548 1. The description of import item at Sl. No. 5 shall be amended (without any change in quantity) to read as under: “Louver Motor (Synchronous Motor)” 2. The description of import item at Sl. No. 6 shall be amended (without any change in quantity) to read as under: “Capacitor relevant” 3. The description of import item at Sl. No. 14 shall be amended (without any change in quantity) to read as under:
“Aluminium Foil of thickness less than 0.2 mm” :19: 90. 857 Plastic Products Sl.No.H6 91. 863 Plastic Products Sl.No.H38 92. 865 866 Plastic Products Sl.No.H54 93. 866 Plastic Products Sl.No.H55 94. 866 867 Plastic Products Sl.No.H56 95. 867 Plastic Products Sl.No.H57 96. 868 Plastic Products Sl.No.H60
2. The description of the import item at Sl. No. 4, shall be amended to read as under: “U.V. Stabilizer (for export with U.V. Stabilizer)” 97. 878 879 Plastic Products Sl.No.H113 98. 880 881 Plastic Products Sl.No.H120 :20: 99. 890 Plastic Products Sl.No.H158 2. The description of import item at Sl. No. 1, shall be amended to read as under: “Relevant Nylon 6/66 Monofilament Yarn/ Nylon Multifilament Yarn/ Nylon Multimono Twine/ Nylon Mono Twine / Polyester Twisted Twine” 100. 890 Plastic Products Sl.No.H159 101. 893 Plastic Products Sl.No.H175
894 Plastic Products Sl.No.H182 2. The description of import item at Sl. No. 1, “1. Relevant HDPE/LDPE/ EVA” 103. 902 Plastic Products Sl.No.H236 2. The description of export item shall be “Polyurethane Resin Solution @60% Resin/ Total Solid content in relevant Solvent” 104. 902 Plastic Products Sl.No.H237 2. The description of export item shall be “Polyurethane Resin Solution containing 66% Resin in relevant Solvent” :21: 105. 906 Plastic Products Sl.No.H250 2. The description of import item at Sl. No. 1, “1. Glass Fabric of relevant 1.05 Sq.Mtr.” GSM 106. 907 Plastic Products Sl.No.H253 The norm covered by this entry shall be deleted. 107. 917 Plastic Products
Sl.No.H286 108. 924 Plastic Products Sl.No.H309 109. 924 Plastic Products Sl.No.H310 110. 926 Plastic Products Sl.No.H319 111. 927 Plastic Products Sl.No.H322 2. The description of import item at Sl. No. 5, “5. Relevant Nitrile Rubber/PVC or SBR” 112. 927 Plastic Products Sl.No.H324 1. The notes below this norm shall be deleted. 2. The quantities of import items at Sl. Nos. 8,9 &10 shall be amended to read as “1.05 kg/kg content in export”, “10 gm” and “1.05 kg/kg content in export” respectively. :22: 113. 928 Plastic Products Sl.No.H330 The norm covered by this entry shall be shifted under Engineering product Group. 114. 928 929 Plastic Products Sl.No.H331 1. The notes below this entry shall be deleted.
2. The description of import item at Sl. No. 1 & 2, with quantity shall be amended to read as under: “1. (a) Polymer namely 1.05 kg/kg SAN/Cellulose content in acetate/ Polypropylene export granules product OR Relevant Tooth Brush Net +2% Handles wastage (b) Relevant Dyes 1% of weight of plastic content 2. Relevant 6/66/616 Nylon 1.05 kg/kg monofilament content in the export product” 4. Import item at Sl. No. 4 with quantity shall be deleted. 115. 929 Plastic Products Sl.No.H334 2. The description of import item at Sl. No. 2, without any change in quantity shall be amended to read as “Colour Pigments (for coloured product).” :23:
929 Plastic Products Sl.No.H335 117. 930 Plastic Products Sl.No.H337 2. The quantities of import items 3 & 4 shall in each case be amended to read as “0.515 kg/kg weight of Polyurethene foam in the export product” 118. 930 Plastic Products Sl.No.H338 2. The quantities of import items 5 & 6 shall in each case be amended to read as “0.515 kg/kg weight of Polyurethene foam in the export product” 119. 930 931 Plastic Products Sl.No.H339 120. 932 Plastic Products Sl.No.H346 121. 934 Plastic Products Sl.No.H361 The norm covered by this entry shall be shifted to Engineering Group. 122. 938 Plastic Products Sl.No.H382 123. 938 Plastic Products Sl.No.H383
2. After import item at Sl. No. 3, following item with quantity shall be added: “4. Colour Master Batch 0.01 kg” (for colour product) :24: 124. 941 Plastic Products Sl.No.H401 The norm covered by this entry shall be deleted. 125. 942, 948 & 949 Plastic Products Sl.No.H404 1. After import item at Sl. No. 1(m), the following items shall be added: “(n) Metalised CPP (Cast polypropylene) Film (o) PVC Heat Shrinkable Film (p) BOPP Heat Shrinkable Film 2. Note No.7 shall be substituted by the following : “7. Additional wastage of 5% is allowed for conversion of LLDPE Granules, LDPE Granules and HDPE Granules into Polyethene Film”. 3. After Sl. No. 12, of Note 12 the specific gravity of the following items (with quantity) shall be added: “13. Metalised CPP 0.90 14. PVC Heat Shrinkable 1.28 Film 15. BOPP Heat Shrinkable 0.90 Film 16. HDPE 0.96 17. LLDPE 0.92
943 Plastic Products Sl.Nos.H407 & H408 1. The note below these entries shall be deleted. 2. The quantity of export item shall be amended to read as “1 Sq. Mtr. (Net weight of PVC film & coating wt. to be indicated).” 3. The heading of import item at Sl. No. 2, shall be amended to read as “Raw material/kg of coating weight in export(Plastisol).” :25: 127. 14 Textile Products Sl.No.J96 (amended vide Public Notice No. 45 Dated:01/11/2001) 1. The description of export item shall be “Cotton Dyed Denim Cloth with/without Elaston/lycra/ Spandex yarn” 2. The description of import item at Sl. No. 2 (with quantity) shall be amended to read as under: “2. Vat Indigo Blue Dye 0.05 kg OR Vat (other than Indigo)/ 0.015 kgs Reactive/sulphur/ Pigment dyes” 3. The following Note below this entry shall be added: “Note: Vat Indigo blue Dye shall be allowed for import only when the export item is Indigo blue dyed denim cloth.”
:26: Annexure “B” to the Public Notice No. 74 Dated: 28/03/2002 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A2835 Naphthalene Beta Sulfonic Acid Sodium Salt 1 kg 1. Naphthalene Crude 2. Caustic Soda 0.770 kg 0.092 kg
A2836 Reactive Blue P3R (Reactive Blue 49) 1 kg. 1. Bromamine Acid (100% purity basis) or Bromamine Acid (95% purity) 2. 2:6 Diamino Mesitylene 4 Sulfonic Acid 3. Cyanuric chloride 4. Copper Bronze 0.610 kg 0.642 kg. 0.418 kg. 0.246 kg. 0.033 kg. A2837 Dinbutyl amine 1 kg. 1. nButanol 1.208 kg. A2838 DinMethyl Amine 1 kg. 1. Methanol 0.872 kg. A2839 Soya Medium Oil Alkyd of 54% Oil Length Having 100% Non Volatile Matter 1 kg 1. Soya bean Oil 2. Isopthalic Acid 3. Tall Oil Fatty Acid 4. C14 Alpha Olefin Chain Terminator (Neodene) 5. Dicyclo Penta Diene 6. Methyl Cyclo Penta Diene 0.424 Kg 0.38 Kg 0.105 Kg 0.032 Kg 0.242 Kg 0.210 Kg :27: A2840 Primary gas reformation Catalyst 1 kg 1. Nickel metal unwrought 0.144 Kgs
254, containing 18% Nickel Oxide 2. Calcium aluminate cement 3. Graphite 0.544 Kgs 0.054 Kgs A2841 4 Chloro 2 Amino Phenol 1 kg 1. 2,5 Dichloro Nitro Benzene 2. Caustic Soda 3. Potassium Hydroxide 1.852 Kg 2.482Kg 0.198 Kg A2842 Napropamide Tech. 90% Minimum 1 kg 1. Alpha Chloro Propionyl Chloride OR Propionic Acid 2. Diethyl Amine 3. Alpha Naphthol 4. Sodium Hydroxide Flakes 5. Toluene 0.640 Kg 0.480 kg 0.427 Kg 0.630 Kg 0.750 Kg 0.400 Kg A2843 Offset Printing Ink – Black having minimum Pigment content 18% (Flush Route) 1 kg 1. Flush Black Base (Pigment 40%) 2. Printing Inks Vehicle Gel (63% Solid Resin) 3. Printing Ink Vehicle Plain (62% Solid Resin) 4. PTFE Wax Compound 5. Cobalt Magnesium Combined Drier (Metal content 12%+/0.2%) 0.412 kg 0.2575 kg 0.2575 kg 0.0020 kg 0.0103 kg
:28: A2844 Offset Printing Ink – Magenta having minimum Pigment content 17% (Flush Route) 1 kg 1. Flush Magenta (Pigment 40%) 2. Printing Inks Vehicle Gel (63% Solid Resin) 3. Printing Ink Vehicle Plain (62% Solid Resin) 4. Polyethylene Wax Compound 5. PTFE Wax Compound 6. Cobalt Magnesium Combined Drier (Metal content 12%+/0.2%) 0.412 kg 0.2575 kg 0.2575 kg 0.0310 kg 0.0020 kg 0.0103 kg A2845 Dimethyl Anthranilate 1 kg 1. Phthalic Anhydride 2. Caustic Soda Lye 3. Methanol 4. Dimethyl Sulphate 1.80 kg 1.155 kg 0.495 kg 1.41 kg A2846 Ortho Amino Phenol 4 Sulphonic Acid 1 kg 1. Ortho Amino Phenol 0.660 kg A2847 Sodium Para Sulfo Phenyl Methallyl Ether 1 kg 1. Methallyl Chloride (95% purity) 0.574 kg A2848 Naphthalene 1,8 Dicarboxylic Anhydride 4Sulfonic Acid 1 kg 1. AceNaphthene 1.067 kg
(4Sulpho NAP Press Cake) A2849 Meta Sulfo Phenyl Gamma Acid (Purity by HPLC 96% Min. and Digamma Acid content 0.2% Max.) 1 kg 1. Beta Naphthol 1.520 kg :29: A2850 Dry Bonding Agent (Rubber Chemical) containing Resorcinol 50 + 2% 1 kg 1. Resorcinol 0.510 kg A2851 Oleyl amine 1 kg Oleic Acid 1.19 kg A2852 NMethyl Gamma Acid 1 kg 1. Beta Naphthol 1.810 kg A2853 Zinc Chloride Solution (42%) 1 kg 1. Zinc Scrap (85% Zinc Content) 0.248 kg A2854 3,5 Dinitro Salicylic Acid Methyl Ester 1 kg 1. Methyl Salicylate 2. Dimethyl Formamide 0.785 kg 1.050 kg A2855 2Bromo Naphthalene 1 kg 1. TriPhenyl Phosphine1. 1.965 kgs A2856 Red Ink Dispersion (Minimum Pigment content 37%) 1 kg 1. Pigment (Rubine Red/ Red Lake C) 2. Petroleum Hydro Carbon Solvent (Distillation range 240ºC300ºC) 0.381 kg 0.147 kg
3. Linseed Alkyd Resin (100% Solid) 4. Vehicle Rosin Resin (Linseed Rosin Ester Solution – 88% Solid content) 0.073 kg 0.441 kg A2857 Red Ink Dispersion (Minimum Pigment content 38%) 1 kg 1. Pigment (Rubine Red, Red Lake C) 2. Petroleum Hydro Carbon Solvent (Distillation range 240ºC300ºC) 3. Linseed Alkyd Resin (100% Solid) 0.391 kg 0.094 kg 0.073 kg :30: 4. Vehicle Rosin Resin (Linseed Rosin Ester Solution – 88% Solid content) 0.483 kg A2858 Blue Ink Dispersion (Minimum Pigment content 38%) 1 kg 1. Pigment (Phthalo Blue) 2. Petroleum Hydro Carbon Solvent (Distillation range 240ºC300ºC) 3. Vehicle Rosin Resin (Linseed Rosin Ester 0.391 kg 0.115 kg 0.535 kg
Solution – 88% Solid content) A2859 Yellow Ink Dispersion (Minimum Pigment content 31%) 1 kg 1. Pigment (AAA Yellow 12) 2. Petroleum Hydro Carbon Solvent (Distillation range 240ºC300ºC) 3. Linseed Alkyd Resin (100% Solid) 4. Vehicle Rosin Resin (Linseed Rosin Ester Solution – 88% Solid content) 0.319 kg 0.073 kg 0.052 kg 0.598 kg A2860 Green Ink Dispersion (Minimum Pigment content 40.5%) 1 kg 1. Pigment (Phthalo Green) 2. Petroleum Hydro Carbon Solvent (Distillation range 240ºC300ºC) 3. Vehicle Rosin Resin (Linseed Rosin Ester Solution – 88% Solid content) 0.417 kg 0.115 kg 0.509 kg :31: A2861 NEthyl NBenzyl Aniline Sulphonic Acid (NEthylN(3 Sulfobenzyl) Aniline 1 kg 1. Mono Ethyl Aniline OR 1. a)Aniline b)Ethyl Alcohol 0.740 kg 0.632 kg 0.331 kg
Denatured (95%) 2. Benzyl Chloride 3. Caustic Soda Lye (46% w/w) 0.671 kg 0.553 kg A2862 Tetra Bromo Bisphenol A 1 kg 1. Bisphenol A 0.466 kg A2863 4 Benzamido 2,5 Diethoxy Aniline 1 kg 1. Hydroquinone 2. Diethyl Sulphate 0.852 kg 3.814 kg A2864 Baking Powder containing 30% of Sodium Bicarbonate 1 kg 1. Sodium Bicarbonate 0.306 kg A2865 2Methyl Phenyl Acetic Acid (Ortho Methyl Phenyl Acetic Acid) 1 kg 1. Ortho Xylene 2. Sodium Cyanide 1.230 kg 0.475 kg A2866 Self Adhesive Paper (175 +/ 10% gsm) of minimum width 1070 mm and Adhesive Coating weight of 20gm/ Sq.mtr. 1 Sq. Mtr. 1. Cast Coated Paper (80+/10% GSM) of 1090 mm width 2. Adhesive (100% Solid) (Rubber based Hot Melt) 3. Silicon Coated Paper of 1090 mm width (62+/10% GSM) 1.04 Sq.Mtr. 0.024 kg 1.04 Sq.Mtr. A2867 Solid Bleached Sulphate Board (SBS Board) 1 MT 1. Wood Pulp 2. SBR Latex (50% DRC) 3. Kaolin 4. Calcium Carbonate 5. Carbaoxy Methyl Cellulose 6. Rosin 0.8736 MT 0.0382 MT 0.0259 MT 0.1334 MT 0.0112 MT 0.0091 MT
:32: A2868 Soya Short Oil Alkyd of 32% Oil Length Having 70 _+ 2% Non Volatile Matter 1 kg 1. Soyabean Oil 2. Isopthalic Acid 3. Tall Oil Fatty Acid 4. C 14 Alpha Olefin ChainTerminator (Neodene) 5. Dicyclo penta Diene 6. Mineral spirit (Distillation range 240 330 Degree Cent.) 7. Terpthalic Acid 8. Maleic Acid 0.294 Kg 0.014 Kg 0.014 Kg 0.014 Kg 0.357 Kg 0.315 Kg 0.014 Kg 0.028 Kg A2869 Dehydrogenation catalyst DHC2 (containing 4.242 Gm of Platinum min. purity 99.5%) 1 kg 1. Platinum ( min. purity 99.95%) 4.242 Gm . A2870 Solvent Green B (Liquid) (Solvent Green 33) (Dye content 60%) 1 kg 1. Quinizarine 2. Para Dodecyl Aniline 3. Aromatic Hydro Carbon Solvent C10 C11 (Distillation range to be given) 0.280 Kg 0.587 Kg 0.480 Kg A2871 Vat Navy Blue R (Vat Blue 51 CDP) 1 kg 1. Anthraquinone 2. Hydroxyl Amine Sulphate 3. Glycerine 1.120 kg 0.150 kg 0.496 kg
4. Toluene 5. Caustic Potash Flakes 6. Caustic Soda Flakes 7. Soda Ash 0.656 kg 2.427 kg 1.137 kg 0.010 kg :33: A2872 Pigment Red 81 1 kg 1. Rhodamine 6 GDN (Basic Red 1) (C.I.No.45160) 2. Molybdenum Trioxide 3. Molybdenum Ore (containing Molybdenum Trioxide 90%) 4. Sodium Tungstate 5. Caustic Soda 0.770 kg 0.423 kg 0.170 kg 0.030 kg 0.500 kg A2873 Glycerol Ester of Gum Rosin 1 kg 1. Gum Rosin containing 90% Abietic Acid 2. Glycerine 1.06 kg 0.109 kg A2874 Solvent Red 2G (Liquid) (Solvent Red 161) (Dye content 55%) 1 kg 1. Ortho Chloro Para Nitro Aniline 2. NEthyl NHydroxy Ethyl Aniline 3. Vinyl Isobutyl Ether 0.300 kg 0.253 kg 0.415 kg 0.572 kg
4. Aromatic Hydro Carbon Solvent C10, C11) A2875 Reactive Blue P3R (Reactive Blue 49) 1 kg 1. Blue P3R Base (condensed Product of Bromamine Acid and 2:6Diamino Mesitylene 4Sulphonic Acid) 2. Cyanuric Chloride 0.733 kg 0.246 kg A2876 Epoxidised Soyabean Oil 1 kg 1. Soyabean Oil (Non edible Industrial Grade) 2. Hydrogen Peroxide (50% w/w) 3. Formic Acid (85% w/w) 0.940 kg 0.370 kg 0.060 kg :34: A2877 Vat Black 27 (Vat Olive R CDP) 1 kg 1. Amino Anthraquinone 2. Anthraquinone 3. Boric Acid 4. Nitrobenzene 5. Benzoic Acid 6. Sodium Sulphide (on 100% basis) 0.401 kg 0.602 kg 0.160 kg 0.357 kg 0.417 kg 1.145 kg A2878 2(4Amino2Methyl Phenylazo) Naphthalene48 (Disulphonic Acid) (Yellow Base) 1 kg 1. C. Acid (Cassella’s Acid) 2. Meta Toluidine 3. Sodium Nitrite 4. Caustic Soda Flakes 0.756 kg 0.294 kg 0.176 kg 0.645 kg A2879 Cyclo Hexenyl Ethyl Amine 1 kg 1. Cyclo Hexanone 2. Sodium Cyanide 1.68 kg. 1.055 kg
3. Cobalt Metal 0.2676 kg A2880 Vat Dark Blue G CDP (Vat Blue 16) 1 kg 1. Anthraquinone 2. Glycerine 3. Ethylene Dibromide 4. Methanol 5. Nitrobenzene 6. Caustic Potash Flakes 1.282 kg 0.567 kg 0.992 kg 1.182 kg 1.600 kg 1.495 kg A2881 Disperse Yellow 160 1 kg 1. 2,3 Naphthalene Dicarboxylic Acid Anhydride 2. 2Methyl3Hydroxy Quinoline4Carboxylic Acid 0.721 kg 0.850 kg A2882 Meta Phenylene Diamine 4,6 Disulphonic Acid 1 kg 1. Meta Phenylene Diamine 0.682 kg A2883 Sulphur 80% WP (Wettasul 80% WP) 1 kg 1. Sulphur 2. PolyCarboxylate 3. Sodium Salt of Alkyl Naphthalene Sulphonate 4. Sodium Ligno Sulphonate 0.812 kg 0.0232 kg 0.0114 kg 0.0154 kg :35: A2884 2, 2 Methylenebis(6 TertiaryButyl4 Methylphenol) 1 kg 1. Paracresol 2. Isobutylene 3. Paraformaldehyde (90 92% purity) 0.784 kg 0.407 kg 0.109 kg A2885 PVC Stabiliser containing Tribasic Lead Sulphate – 1 kg 1. Lead Ingots 2. Stearic Acid 3. Wax 0.392 kg 0.450 kg 0.100 kg
32+/2%, Lead Stearate –58+/1%, Wax – 10% A2886 Bithionol Sulfoxide 1 kg 1. 2,4 Dichloro Phenol 2. Carbon Tetra Chloride 3. 1,4 Dioxane 1.360 kg 1.000 kg 1.00 kg A2887 Aniline Oil 1 MT 1. Benzene 2. PalladiumPlatinum based Catalyst (Palladium content 4.5%, Platinum content 0.5%) 875 kgs. 0.001 kg A2888 Heat Resistant Latex Rubber Threads (Talc/ Silicone coated) 1 MT 1. Latex Rubber (Dry) OR Latex Rubber Wet (60% DRC) 2. Rubber Accelerators, namely, ZMBT, Hepteenbase, ZDBC 3. Antiozonent (MC Wax, Lowinox) 4. Antioxidant (Wingstay L/ Ralox LC/ Irganox 1010) 970.00 kgs 1617.00 kgs 11.00 kgs 4.40 kgs 18.00 kgs :36:
5. Dispersing Agent (Sodium Methoxylate) 6. Rubber Pigments 7. Talcum Powder OR Silicone Emulsion (for Silicon coated product) 8. Bactericide (SodiumO Phenyl Phenolic) 9. Stabilizer (Oliec Acid) 10.Filler (Titanium Dioxide) 11.Activator (Zinc Oxide) 12.a) Nylon Filter Bags – 50 Micron b) Nylon Filter Bags – 250 Micron c) Filter Cloth (82 Cm x 65 Cm) 13. Paper for Cartons 0.06 kg 51.68 kgs 60.00 kgs 10.00 kgs 0.50 kg 6.00 kgs 55.00 kgs 24.66 kgs 4 Nos. 4 Nos. 8.00 kg As per General Packing Policy. A2889 3,N,N Dimethyl Amino Benzoic Acid 1 kg 1. Meta Nitro Benzoic Acid 2. Methanol 3. Catalyst (5% Palladium on carbon) 1.099 kg. 0.750 kg. 0.0013kg
:37: A2890 4 Methoxy 2 Methyl Diphenyl Amine 1 kg 1. Meta Cresol 2. Acetanilide 3. Hydrobromic Acid (48%) 4. Isopropyl alcohol 5. Methanol 6. Hydrogen Peroxide (50%) 7. Potassium Carbonate 1.070 kg. 1.083 kg. 1.550 kg. 0.254 kg. 0.562 kg. 0.672 kg. 1.090 kg. A2891 Offset Printing Ink – Yellow having minimum Pigment content 14% (Flush Route) 1 kg 1. Flush Yellow (Pigment 36%) 2. Printing Inks Vehicle Gel (63% Solid) 3. Printing Ink Vehicle Plain (62% Solid) 4. Polyethylene Wax Compound 5. PTFE Wax Compound 6. Cobalt Magnesium Combined Drier (Metal content 12%+/0.2%) 0.412 kg 0.2575 kg 0.2575 kg 0.0310 kg 0.0020 kg 0.0103 kg A2892 4Amino Phenyl Beta Hydroxy Ethyl 1 kg 1. Aniline Oil 2. Acetic Acid (Glacial) 1 kg. 0.7 Kg.
sulphone (Para Amino Base) A2893 Polycarbonate Compound (containing 99.5% Poly Carbonate Resin) 1 kg 1. Tris (Dibutylpheneil) Phos 2. UVA 1577 {2(4,6 diphenyl1,3,50 Triaz in 2yl) 5(Hexy)oxyl Phenol} 3. a)Polycarbonate Powder b)Colorants (Relevant) 0.00053 kg 0.04725 kg 1.00219 kg 0.00003 kg :38: OR 3. Polycarbonate Resin 4. Additives (Heat Stabilizers – Phosphite based, Light Stabilizers Benzotriazole based Stabilizers –Epoxy based, Phosphite based; Anti Oxidants 1.0430 kg 0.0047 kg Note: 1.The Polycabonate Compound is based on 99.5% +/ 0.5% Polycarbonate Resin content. In case of any variation, quantities will be calculated on prorata . Note:2.Combination of various additives and Pigments is to be permitted within the quantities indicated against each. A2894 Polyamide Sheet Reinforced Flat Belt Made out of Nitrile Rubber Compound 1 kg 1. Synthetic Rubber (Nitrile) 0.49 kg/kg of the Rubber compound
2. Plasticizer (Thiakol) 3. Processing Aids (A C Polyethylene, Polythylene – Glycol – 4000) 4. Nylon Yarn 6 Industrial Grade(410 +/ 10 Denier) content in export product 0.058 kg/kg of the Rubber compound content in export product 0.01 kg/kg of the Rubber compound content in export product 1.05 kg/kg content of Nylon Fabric. :39: 5. Polyamide Granules (Ultramid 1c & Ultramid 6a natural) 6. Polyamide Sheets 7. Bonding Agent (Resorcinol) 0.003 kg/kg content in export product. 1.050 kg/kg content in export product. 0.015 kg
A2895 2,4 Dihydroxy Benzophenone 1 kg 1. Resorcinol 2. Benzo Trichloride 3. Methanol 0.653 kg 1.276 kg 0.637 kg A2896 Zinc Dibenzyl Dithiocarbamate (100% Assay basic) 1 kg 1. Dibenzylamine 0.700 kg A2897 Calcium Dodecyl Phenate Detergent (Lubricating Oil Additive) containing Calcium Dodecyl Phenate 40% Minimum 1 kg 1. Dodecyl Phenol 2. Isodecyl Alcohol 3. C20C24 Linear Alkyl Benzene Sulphonic Acid 4. Slaked Lime 5. Filter Aid 0.367 kg 0.010 kg 0.023 kg 0.103 kg 0.027 kg A2898 Insulation Paper Board for Transformer (made from 100% Unbleached Sulphate Soft Wood Pulp) 1 kg 1. Unbleached Soft Wood Sulphate Pulp 1.05 kg A2899 Epoxy Hardener containing 90% TETA 1 kg 1. Triethelene Triamine 0.900 kg :40: A2900 Epoxy Resin Solution for Anticorrosive coating containing 70% Epoxy Resin, 1 kg 1. Epoxy Resin 2. Furfuryl Alcohol 3. Silane 0.700 kg 0.300 kg 0.030 kg
30% Furfuryl Alcohol and 3% Silane A2901 Allura Red (Food Red 17) (C.I. No. 160035) 1 kg 1. Para Cresidine Ortho Sulphonic Acid 2. Beta Naphthol 3. Sodium Nitrite 4. Methanol 5. Soda Ash 6. Caustic Soda 0.620 kg 0.512 kg 0.210 kg 1.500 kg 0.300 kg 0.400 kg A2902 Diethyl Meta Amino Phenol BCA (2Hydroxyl4 N,N Diethyl Amino 2Carboxy Benzo phenone 1 kg 1. N,N Diethyl Meta Amino Phenol OR 1. a)Metanilic Acid b)Ethyl Chloride c)Caustic Potash d)Caustic Soda 2. Thalic Anhydride 0.604 kg 0.821 kg 0.785 kg 0.725 kg 0.906 kg 0.606 kg A2903 N. Methyl Formanilide 1 kg 1. NMethyl Aniline 0.955 kg A2904 Benzyl Amine 1 kg 1. Benzaldehyde 1.06 kg A2905 2,6 Ditertiary Butyl Cresol (Butylated Hydroxy Toluene) 1 kg 1. IsoButylene 2. Para Cresol 0.663 kg 0.705 kg A2906 2,5 Thiophenediyl bis (5tertbutyl1, 3 benzoxazole (UVITEX OB) 1 kg 1. 2, 5 Thiophene Dicarboxylic Acid (Thiopen2,5 DICB SRE) 2. 2Amino 4terbutyl Phenol 0.443 kg 0.876 kg :41:
3. Soprophor FL/C (Ethanol Nitrolis Hydroxy Poly Phosphate) 0.040 kg A2907 Pendimethalin Technical 95% 1 kg 1. 4 Nitro OrthoXylene 2. DiEthyl Ketone 3. 3% Platinum Carbon Catalyst 4. Ethylene Dichloride 0.581 kg 0.363 kg 0.0004 kg 0.155 kg A2908 Dithianon Technical 93% Minimum 1 kg 1. Sodium Cyanide 2. Dimethyl Formamide 0.427 kg 0.467 kg A2909 1,1,1 – Tris (Para Hydroxy Phenyl) Ethane 1 kg 1. Para Hydroxy Aceto Phenone 2. Phenol 3. Sodium Boro Hydride 4. 3Mercapto Propionic Acid 0.654 kg 1.200 kg 0.003 kg 0.065 kg A2910 Wallastonite Powder coated with 0.5% Amino Alkyl Silane (Silquest A1100) 1 MT 1. Amino Alkyl Silane (Silquest A1100) 5.1 kgs A2911 Wallastonite Powder coated with 1% Amino Alkyl Silane (Silquest A1108) 1 MT 1. Amino Alkyl Silane (Silquest A1108) 10.2 kgs A2912 3 N:N Dimethyl Amine Benzoic Acid 1 kg 1. Meta Nitro Benzoic Acid 2. Methanol 3. Catalyst (5% Palladium on Carbon) 1.099 kg 0.750 kg 0.0013 kg A2913 2:4 Xylidine/ 2:6 1 kg 1. Meta Xylene 1.16 kg
Xylidine A2914 Methane Sulfonic Acid 1 kg 1. Dimethyl Disulfide 0.542 kg :42: A2915 Potassium Meta Bisulfite 1 kg 1. Potassium Carbonate 0.661 kg A2916 Magnesium Perchlorate Hexahydrate 1 kg 1. Sodium Chlorate 0.714 kg A2917 Tetra Iso Propyl Titanate 1 kg 1. Titanium Tetra Chloride 2. Iso Propyl Alcohol 3. NHexane 0.727 kg 0.921 kg 0.250 kg A2918 2Methyl Cyclohexyl Acetate 1 kg 1. Ortho Cresol 0.847 kg A2919 Losartan Potassium 1 kg. 1. Ortho Tolyl Benzo Nitile 2. Trityl Chloride 3. Sodium Azide 4. Sodium Borohydride 5. Potassium Hydroxide 6. Acetone 7. Toluene 8. Isopropyl Alcohol 1.60 Kg. 2.33 Kg. 0.54 Kg. 0.78 Kg. 0.16 Kg. 1.30 Kg. 2.17 Kg. 1.74 Kg. A2920 4(4Chloro Benzoyl) Phenol 1 kg. 1. Para Chloro Benzoyl Chloride/Para Chloro Bazoic Acid 2. Phenol 1.26 Kg. 0.712 Kg.
3. Iso Propyl Alcohol 0.932 Kg. A2921 1,2,3,4,5,6 Hexahydro 5,11 Dimethyl3 Benzyl2, 6 Methane3 Benzazocin 801 (Nor Pentazocin) 1 kg 1. 3,4 Lutidine 2. Sodium Borohydride 3. Tetra Hydro Furan 4. Anisyl Alcohol 5. Magnesium Turning 6. Dimethyl Formamide 1.80 Kg. 0.575 Kg. 4.35 Kg. 1.0 Kg. 0.40 Kg. 2.05 Kg. A2922 4Chloro Methyl2 Guanidino Tiazol Hydrochloride 1 kg 1. Guanyl Thiourea 2. 1,3 Dichloro Acetone 0.60 Kg. 0.65 Kg. :43: A2923 Niclosamide Piperazine Salt 1 kg 1. Piperazine Anhydrous 2. Dimethyl Formamide 0.13 Kg. 1.94 Kg. A2924 Phenyl Hydrazine Semi Carbazide 1 kg 1. Aniline 2. Sodium Nitrite 3. Caustic Soda Flakes 4. Isopropyl Alcohol 0.95 Kg. 0.77 Kg. 0.33 Kg. 0.77 Kg. A2925 Azerythromycin 1 kg 1. Erythromycin base (on 100% Activity Basis) 2. Hydroxyl Amine HCL 3. Triethyl Amine 4. Methylene Chloride/Acetoe 5. Platinum Metal 6. Para Toluene Sulphonyl Chloride 1.86 Kg. 0.97 Kg. 0.48 Kg. 1.27 Kg. 1.05 Gm/Kg. 0.69 Kg. A2926 N Methyl Formanilide 1 kg 1. NMethyl Aniline 0.955 Kg. A2927 Para Chloro Phenyl 1 kg 1. Parachloro 1.18 Kg.
Glycine Benzaldehyde 2. SodiumCyanide 3. Ethylene Dicholoride 4. Caustic Sodium Flakes 5. Methanol 6. Isopropyl Alcohol 0.41 Kg. 0.885 Kg. 0.81 Kg. 0.74 Kg. 0.32 Kg. A2928 Acefylline 1 kg 1. Anhydrous Theophylline 0.85 Kg. A2929 Para Amine Azo Benzene 3,4 Disulfonic Acid 1 kg 1. Aniline Oil 2. Sodium Nitrate 3. Caustic Soda Flakes 1.350 kg 0.502 kg 1.710 kg A2930 TetraNButyl Titanate 1 kg 1. Titanium Tetrachloride 2. N Butanol 0.59 Kg. 0.95 Kg. :44: A2931 Benzhydryl Piperazine 1 kg 1. Benzophene 2. Sodium Borohydride 3. Thionyl Chloride 4. Piperazene 5. Methanol 6. Toluene 7. Hexane 1.15 kg. 0.115 kg. 0.680 kg. 0.55 kg. 1.15 lit/kg 1.05 lit./kg 0.92 lit/kg. A2932 2,4 Dihydoxy Benzophenone 1 kg 1. Resorcinol 2. Benzo Trichloride 3. Methanol 0.653 kg. 1.276 kg. 0.637 kg.
A2933 Mono Ethyl Ortho Toluidine 1 kg 1. Ortho Toluidine 1.2 kg. A2934 Isophthaloyl Chloride 1 kg 1. Isophthalic Acid 0.910 kg. A2935 Coumarin 1 kg 1. 1,2 Benzopyronecrude (7884%) 1.21 kg. A2936 N, N Bis (2Hydroxy Ethyl) Para Toluidine 1 kg 1. Para Toluidine 2. Ethylene Oxide 0.560 kg. 0.460 kg. A2937 N, N Bis (2Hydroxy Propyl) Para Toluidine 1 kg 1. Para Toluidine 2. Ethylene Oxide 0.495 kg. 0.547 kg. A2938 1,2,3,4 Butane Tetra Carboxylic Acid 1 kg 1. Tetra Hydro Phthalic Anhydride 1.078 Kg. A2939 N.N. Dimethyl Para Toluidine 1 kg 1. Para Toluidine 2. Methanol 0.902 kg 0.615 kg A2940 1 Naphthol 3,4 Disulphonic Acid (Violet Acid) 1 kg 1. Refined Naphthalene 2.420 kg A2941 Styrene Phosphate Acid 1 kg 1. Styrene 2. Phosphorous Penta Chloride 0.830 kg 1.716 kg A2942 Hydrazone of 4 Sulfo Anthranilic Acid (Sun PH Acid) 1 kg 1. Ortho Nitro Toluene 1.750 kg :45: A2943 Naproxen 1 kg 1. DLNaproxen OR 1. a) 2Acetyl6Methoxy Napthalene 1.48 kg 2.43 kg
b) Potassium Hydroxide c) Hydroxylamine Sulphate 2. NOctylDGlucamine 3. Isopropyl Alcohol 4. Methanol 4.09 kgs 0.93 kg 0.70 kg 3.76 kgs 1.08 kg A2944 Naproxen (from N Methyl Glucamine Route) 1 kg 1. Beta Napthol 2. Propionyl Chloride 3. Bromine 4. NMethyl Glucamine OR 4. a) Glucose b) Reney’s Nickel c) Methanol 5. Neo Pentyl Glycol 6. Trimethyl Orthoformate 7. Hydrazine hydrate 8. Methanol 9. E.D.C. 3.05 kgs 2.26 kgs 3.18 kgs 1.39 kg 2.10 kgs 0.14 kg 9.29 kg 2.14 kgs 4.31 kgs 0.92 kg 9.05 kgs 2.92 kgs A2945 Naproxen (from Tartaric Acid Route) 1 kg 1. Beta Napthol 2. Propionyl Chloride 3. Bromine 4. LTartaric Acid 5. Trimethyl Ortho Formate 6. Chloroform 7. Methane Sulphonic Acid 8. Iso Propyl Alcohol 3.05 kgs 2.26 kgs 3.18 kgs 2.95 kgs 1.81 kg 2.32 kgs 0.20 kg 2.92 kgs 2.92 kgs
9. Sodium Hydroxide Flakes 10. Activated Carbon 92.85 gms :46: A2946 Pefloxacin 1 kg 1. 3 Chloro4Fluoro Aniline 2. EMME 3. Nmethyl Piperazine 4. Diethyl Sulphate 1.18 kg 1.90 kg 2.00 kgs 4.50 kgs A2947 Ceramic Glazed Floor tiles Coloured having minimum bonding strength of 350 kgs/Sq.Cm. and Abrasion resistance of minimum 2000 cycles as per PEI method 1000 MT 1. Raw Material for tiles: a) micronised Zirconium Silicate b) Pigments c) Sodium Tripoly Phosphate 2. Consumables: a) Ceramic Rollers/Pipes b) Screen Printing / Bolting Cloth c) High Steel Casted Rubber coated Pu ches of different sizes 3. Frits OR Raw Materials for Frites: a) Cobalt Oxide b) Borax Penta Hydrate 20 MT 6 MT 23 MT 138 Nos. 100 Sq.Mtr. 216 Nos. 382 gms/ Sq.Mtr. 0.625 MT 50 MT
c) Borix Acid d) Zirconium Oxide 5 MT 1.875 MT :47: A2948 Portland Slag Cement 1 MT 1. Coal OR Petroleum Coke (Minimum Sulphur content 4% and fixed Carbon below 80%) 2. Bauxite (Percentage Alumina content not less than 86%) (It shall be given if export product contain minimum 60% C3S content) 0.200 MT/MT of Ordinary Portland Cement contained in export 0.13 MT 0.03 MT
3. Magnesite Refractory Bricks (For those using only this quality bricks) OR Magnesite Chrome Bricks 4. Relevant Packing Bags OR Paper Bags 5. Furnace Oil 0.0003 MT 0.0003 MT Net to net Net +2% 0.034 KL A2949 Naphthalene 1.8 Dicarboxylic Anhydride 4Sulfonic Acid (4Sulpho NAP Press Cake) 1 kg 1. Ace Naphthene 1.067 kg :48: A2950 Tertiary Butyl peroxy Pivlate 75% in Odourless Mineral Spirit 1 kg 1. Teritary Butyl Alcohol 2. Pivoloy 1 Chloride 3. Hydrogen Peroxide (50%) 4. Odourless Mineral Spirit 0.354 kg 0.571 kg 0.358 kg 0.250 kg A2951 Sultamicillin Base 1 kg 1. 6APA 2. Ampicillin Trihydrate 3. 2Ethyl Hexanic Acid 4. Methyl Aceto Acetate 3.55 kgs 1.45 kg 1.54 kg
5. Dimethyl Formamide 6. Methylene Chloride 7. Acetonitrile 1.06 kg 1.78 kg 5.68 kgs 1.38 kg A2952 Para Phenylene Diamine 2, 5 Disulphonic Acid 1 kg 1. Para Phenylene Diamine 0.500 kg A2953 Koch Acid 1 kg 1. Crude Naphthalene 0.682 kg A2954 Sulpho C Acid (2 Naphthylamine 4,6,8 Trisulfonic Acid) 1 kg 1. Crude Naphthalene 2. Soda Ash 1.330 kg 2.070 kgs A2955 NMethyl Gamma Acid 1 kg 1. Beta Naphthol 1.890 kg A2956 Naphthalene 1,3,6 Trisulfonic Acid 1 kg 1. Crude Naphthalene 0.737 kg :49: A2957 Tissue Wet Cleaning of 40’s pack size 100 Pkt. 1. Tissue Paper 1.05 kg/kg net weight of dry tissue paper 1.05 kg/kg weight of
2. PP Moulding Powder/ Granules 3. Preservatives namely Methyl Parabens/ Propyl Parabens plastic content and accessories 8.5% of weight of tissue paper A2958 Tissue Wet Cleansing of 50’s pack size 100 Pkt. 1. Tissue Paper 2. PP Moulding Powder/ Granules 3. Preservatives namely Methyl Parabens/ Propyl Parabens 1.05 kg/kg net weight of dry tissue paper 1.05 kg/kg weight of plastic content and accessories 8.0% of weight of tissue paper A2959 Tissue Wet Cleansing of 80’s pack size 100 Pkt. 1. Tissue Paper 2. PP Moulding Powder/ Granules 3. Preservatives namely Methyl Parabens/ Propyl Parabens 1.05 kg/kg net weight of dry tissue paper 1.05 kg/kg weight of plastic content and accessories 7.5% of weight of tissue paper
:50: A2960 Tissue Wet Cleansing of 100’s pack size 100 Pkt. 1. Tissue Paper 2. PP Moulding Powder/ Granules 3. Preservatives namely Methyl Parabens/ Propyl Parabens 1.05 kg/kg net weight of dry tissue paper 1.05 kg/kg weight of plastic content and accessories 6.5% of weight of tissue paper A2961 Acephate 75% S.P. 1 kg 1. O, O Dimethyl Phos phoramide Thioate (DMPAT) (90%) 2. Methylene Chloride and Ethyl Acetate OR Dichloroethane 3. Acetic Anhydride 1.05 kg 0.33 kg 0.16 kg 0.51 kg 0.62 kg A2962 Automobile Tube (made of Natural Rubber/ Synthetic Rubber) for Bus/ Truck Tyres 100 kgs (excluding the weight of valve) 1 a) Relevant Natural Rubber b) Synthetic Rubber SBR(1502/1712) c) PBR 2 Carbon Black 44 kgs 3 kgs 6 kgs 25 kgs
3 Rubber Chemicals (Antioxidants, Accelerators, Retarders, Peptizer) (Import of Antioxidants shall not exceed 50% of rubber Chemicals allowed) 1.9 kg :51: 4 Zinc Oxide 5 Stearic Acid 6 Brass Scrap 3.8 kgs 0.1 kg 3 kgs A2963 Automobiles Tubeless Tyre Reinforced with Nylon Tyre Cord Warp Sheet or Rayon Tyre Cord Warp Sheet for bus/ Truck 100 kgs 1. a) Relevant Natural Rubber b) Synthetic Rubber – SBR(1502/1712) c) PBR 2. Chloro Butyl Rubber 3. Carbon Black 4. Nylon/ Rayon Tyre Cord/ Warp Sheet (840 Denier and above) 5. Bead Wire 6. Rubber Chemicals: a) Antioxidants b) Accelerator, Retarders and Peptizers 36 kgs 3 kgs 6 kgs 3.8 kgs 22.2 kgs 9.55 kgs 4 kg 1 kg 1 kg
7. Zinc Oxide 8. All other misc. materials/Chemicals viz. Microcrystalline Wax, Paraffin Wax, Pigments and Softners, Sulphur, Stearic Acid, Solvents, Plasticisers, Synthetic resins, Bonding/ Coupling 2 kgs 7.9 kgs :52: Agents, Activators and Files, Dip Chemicals (excluding Resorcinol) Mould Release Agents, tackifiers and catalysts and Syloff 9. Resorcinol 0.1 kg Note:1. Item No. 2 and 4 can be given upto 3 kgs more than the quantity allowed but the total of 1, 2 and 4 should not exceed 61.55 kgs. A2964 High Voltage Porcelain insulators 1000 kgs of Porce 1. Ball Clay 2. Microfined Calcined 200 kgs 150 kgs
for transmission line application – Pin type insulator lain body Alumina 3. Bentonite 4. Sodium CMC 5. Green Chrome Oxide 6. Zinc Oxide 7. Manganese Dioxide 8. Blue or Grey Stain 25 kgs 2.5 kgs 1 kg 1 kg 1 kg 0.8 kg (in case of Blue or Grey insulator only) A2965 Viscose Staple Fibre (Dyed) 1 kg 1. Caustic Soda Lye 2. Wood Pulp 3. Spin Finish Oil 4. Zinc Sulphate 5. Additive (Berol) 6. Disperse Dope Dyes 0.50 kg 1.05 kg 0.002 kg 0.005 kg 0.003 kg 0.020 kg A2966 Cubic Zirconia 1 MT 1. Zirconium Oxide (98.5%) 2. Yitrium Oxide (99.99%) 0.852 MT 0.152 MT :53: A2967 Densified Lamp Block (NH Coke) 1 kg 1. Lamp Black/ Thermal Black 2. Tar Pitch (Volatile matter 42.3%) 3. Tar Oil (Volatile 0.506 kg 0.791 kg 0.132 kg
matter 80%) A2968 Heavy Duty Hard Rubber Battery containers made out of Minimum 20% Styrene Butanene Rubber (SBR) 1502 1 kg 1. Styrene Butanene Rubber (SBR) 1502 2. Silica 3. Sulphur 4. Rubber Accelerator 0.234 kg 0.0700 kg 0.0109 kg 0.0011 kg A2969 Mechanical Carbon Blanks 1 kg 1. Natural Graphite 2. Foundry Coke 3. Tar Pitch 4. Lamp Black 5. Pitch Coke 6. Sulphur 7. Ammonia Ligno Sulphonate 0.431 kg 0.254 kg 0.313 kg 0.047 kg 0.070 kg 0.053 kg 0.020 kg A2970 Metallurgical Coke 1 MT 1. Coking Coal 1.33 MT A2971 Mico Strips (100% Mica) 1 kg 1. Mica Sheet (100% Mica) 1.10 kg A2972 Nylon Filament Yarn (840 Denier and below) 1 MT 1. Nylon 6 Chips 2. Spin Finish Oil 1.092 MT 18.9 kgs A2973 Brown Fused Aluminium Oxide Grain 1 MT 1. Brown Fushed Aluminium oxide Crude/ Lump purity 95% minimum 1.1 MT
:54: A2974 Wardrobes/ Shelves made out Household Furniture of Particle Board (Plain or laminated), Medium Density Fibre Boards 1 CBM 1. Plain Particle Board/ Medium Density Fibre Board/ Chip board 2. Decorative Paper 3. Decorative Edge 4. Urea Formaldehyde Resin & Hardener 5. Hot Melt Glue 6. Finishing Lacquer System (primer, Lacquer, Thinner, Finish Paint, Photo Initiator, Anti Bubble Agent and Tension Agent) 7. Hardware (parts of Furniture)/Glass/ Mirror 1.304 CBM 165.056 Sq. Mtr. 9.125 Sq.Mtr. 1.25% of FOB value 1.87% of fob value 1.87% of fob value Net to Net+1% A2975 Chest of Drawers, Boards/ Table/ Shelves/ Dressing Stool/ Dressing Mirror made out of particle Boards (Plain or laminated)/ Medium density Fibre Boards 1 CBM 1. Plain Particle Board/ Medium Density Fibre Board/ Chip board 2. Decorative Paper 3. Decorative Edge 4. Urea Formaldehyde Resin & Hardener 5. Hot Melt Glue 1.294 CBM 141.391 Sq. Mtr. 9.596 Sq.Mtr. 1.25% of fob value
1.87% of fob value :55: 6. Finishing Lacquer System (primer, Lacquer, Thinner, Finish Paint, Photo Initiator, Anti Bubble Agent and Tension Agent) 7. Hardware (parts of Furniture)/Glass/ Mirror Net to Net+1%
:56: Annexure “C” to the Public Notice No. 74 Dated: 28/03/2002 ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed C1765 Dacrometised or Other equipment surface coated high tensile precision fastners Cold/Hot Forged Bolts/screws All variteties 1 kg 1. Cold heading quality steel wire rod/wires/ bars 2. Dacromet or other similar materials used for surface coating 3. Miscellaneous items Thread rolling 1.128 kg 0.03225 kg Upto 5% of the FOB value
Dies/knurling dies(Flat cylinderical), Forming/Cutting Tools and Tools and Alloy Steel C1766 Dacrometised or Other equipment surface coated high tensile precision fastners Cold/Hot Forged Nuts All variteties 1 kg 1. Cold heading quality steel wire rod/wires/ bars 2. Dacromet or other similar materials used for surface coating 3. Miscellaneous items: taps/ Tapnibs Forming/ Cutting Tools and Tools and Alloy Steel 1.20 kg 0.02502 kg Upto 5% of the FOB value :57: C1767 Disc Springs made of Cold rolled (annealed/ un annealed) Non Alloy/Alloy Steel 1 kg 1. Relevant Grade of Cold Rolled Steel Strips/ Wide Coils 1.5 kg
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.