Amendments/modifications & additions in SION
(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART1SECTION1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE PUBLIC NOTICE NO. 09 (RE2001)/19972002 NEW DELHI : DATED : 01/05/2000. Attention is invited to Paragraph 4.11 of the Export and Import Policy 19972002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 19972002, as amended and also to the Handbook of Procedures, Vol.2, 19972002, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 19972002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 19972002, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 19972002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below: CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A2403, the new entries from Sl.No.A2404 to A2428 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS
After the existing entry at Sl.No.C1521, the new entries from Sl.No.C1522 to C1530 shall be added as per Annexure "C" to this Public Notice. LEATHER PRODUCTS After the existing entry at Sl.No.G46, a new entry Sl.No.G47 shall be added as per Annexure "C" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J311, a new entry Sl.No.J312 shall be added as per Annexure "C" to this Public Notice. 5. In the Hand Book of Procedures (Vol.2) 19972002, as amended, Input Output Norms are valid, in some cases, upto a specified period. In all such cases, validity of Input Output Norms shall stand extended upto 30th September, 2000. This issues in Public interest. Sd/ (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE (S. L. GUPTA) DY. DIRECTOR GENERAL OF FOREIGN TRADE FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure "A" to the Public Notice No.9 Dated: 01/05/2000 AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference AMENDMENTS/CORRECTIONS 1 2 3 4 1. 14 Chemicals & Allied Products Sl.No.A58 After import item No. 3(c) the following item along with quantity shall be added: "(d)Potassium Carbonate 0.267 kg" 2. 17 Products Sl.No.A69 After import item No. 3(b) the following item along with quantity shall be added: "(c) Potassium Carbonate 0.174 kg" 3. 19 Products The norms covered by this entry shall be substituted by the following:
Sl.No.A84 Sl.No. Export Item Qty. Import Item Qty Allowed A84 Betamethasone Dipropionate BP 93/USP 23 1 kg 1.17Alpha 1Di Hydroxy16Beta Methyl 9Beta, 11BetaEpoxy Prigma1, 4Diene3, 20 Diene (DBXI) 2.Triethyl Ortho Propionate/ Trimethyl Ortho Propionate 1.125 kg 0.65 kg 4. 35 Products Sl.No.A177 The description of import item No. 1 along with quantity shall be amended to read as under: "1. 6 APA 0.49 kg OR i) Pencillin G Potassium 1.568 BOU ii)Methylene Chloride 0.49 kg iii)Pen. G Amidase 0.822 gm". 5. 44 Products Sl.No.A238 The norms covered by this entry shall be
Sl.No. Export Item Qty. Import Item Qty Allowed A238 Flucloxacillin Sodium 1 Kg 1.Amino Penicillanic Acid (6 APA) OR 1.a) Pencillin G Potassium First Crystal b)Penicillin G Amidase Enzyme c)Methylene Chloride/ Butyl Acetate 1.FCMIC Chloride OR 2. a)2Fluoro6Chloro Benzaldehyde b)Hydroxylamine Sulphate c)Methyl Aceto 0.502 kg 1.606 BOU 0.842 gm 0.502 kg 0.706 kg 0.806 kg 0.537 kg
Acetate 0.77 kg d)Chloroform e)Sodium Hydroxide 3. 2Ethyl Hexanoic Acid 4. Methylene Chloride 5. Acetone 6. Chloroform 0.95 kg 0.76 kg 0.37 kg 1.30 kgs 0.50 kg 0.90 kg 6. 73 Products Sl.No.A487 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed A487 Acid Black 172 (100% Dye content) 1 kg 1.Beta Napththol 2.Sodium Nitrite 3.Twitchell Oil 0.746 kg 0.251 kg 0.020 kg 7. 146 Products Sl.No.A1045 The norms covered by this entry shall be Export Item Qty Import Item Qty Allowed
Sl.No. Export Item Qty. Import Item Qty Allowed A1045 Laboratory Equipment/ Glassware made of Fused Silica/ Quartz/ Borosilicate 1 kg 1. Relevant Fused Silica/ Quartz Borosilicate Tube of assorted size and thickness 1.70 kg 8. 164 Products Sl.No.A1280 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed A1280 Cocoamidopropyl Betaine (36 +/ 2% Solids) (Active matter 29% minimum) 1 kg 1.Coconut Fatty Acid OR Methyl Ester of Coconut fatty Acid 2.Dimethyl Amino Acid 3.Sodium Monochloro Acetate OR 4.Monochloro Acetic Acid 0.187 kg 0.190 kg 0.087 kg 0.093 kg 0.077 kg
5.Caustic Soda Flakes 0.033 kg 9. 210 Products Sl.No.A1676 1. The description of the export product shall be amended to read as under: "Chlorobutyl or Bromobutyl/Natural Rubber Blended Tubes." 2. The description of import item No. 1 shall be amended to read as under: "Relevant Chlorobutyl Rubber or Bromobutyl Rubber" 10. 214 Products Sl.No.A1687 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed A1687 Metal fitted/ Bonded/ Unbonded rubber Part (Moulded/ Extruded) including Engine Mounting and Automotive Parts 1 kg 1.Mild Steel Sheets/ coils/ Plates/ Rods/ Rounds/ Strips 1.Relevant Rubber Compound consisting of the following: 1.30 kg/kg content in the export product
2. (a) Relevant Natural Rubber/ Synthetic Rubber depending upon the description of the product to be exported (b) Carbon Black (c) Zinc Oxide 0.63 kg/kg content of Rubber compound in the export product 0.126 kg/kg content of Rubber compound in the export product 0.0315 kg/kg content of Rubber compound in the export product (d) Rubber Chemicals viz. Antioxidant/ Accellerator/ retarder And Peptizer 0.012 kg/kg content of Rubber compound in the export product 0.042 kg/kg content of Rubber
(e) Misc. chemicals viz. Stearic Acid, Insoluble Sulphur, Silicon Oil 3. Bonding agent compound in the export product 0.01 kg/kg of steel in the export product Note:1 The CIF value of rubber Chemicals and Miscellaneous Chemicals should not exceed 7% of FOB value of exports. Note:2 The bonding agents shall not be allowed for import in the case of metal unbonded part or fitted part. 11. 302 Products Sl.No.A2263 The description of import item No. 6 along with quantity shall be amended to read as under: "2 Methoxy Propene 0.905 kg OR 2,2Dimethoxy Propane 1.45 kg" 12. 307 Products Sl.No.A2302 The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under: "8. Glass Vials 11,500 Nos 9. Rubber Stopper 11,000 Nos
10.Aluminium 11,000 Nos" Caps/Seals 13. 308 Products Sl.No.A2304 The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under: "8. Glass Vials 5,750 Nos 9. Rubber Stopper 5,500 Nos 10.Aluminium 5,500 Nos" Caps/Seals 14. 443 Engineering Product Sl.No.C187 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed C187 A.Electric Lamp Caps (Alumi nium)/ GLS Caps B22D & E 27/27 1000 pcs. 1.Aluminium Strip OR Aluminium Ingot OR Aluminium Scrap 2.916 kg 2.974 kg 3.047 kg
1.Brass Strip OR Brass Cathode/ Rod 0.224 kg 0.233 kg B. FTL Caps (G 13/35 mm) 1000 pcs. 1.Aluminium Strip OR Aluminium Ingot 2.Brass Pin 2.55 kg 2.601 kgs 2020 Nos. C. FTL Caps (G 13/24 mm or 24.5 mm) 1000 pcs. 1.Aluminum Strip OR Aluminium Ingot OR Aluminium Scrap 1.Brass Pin 1.65 kg 1.683 kg 1.724 kg 2020 Nos. 15. 531 Engineering Product Sl.No.C472 In the note below this norm, the words viz. "Table 2" shall be substituted by "Table 3". 16. 657 Engineering Product Sl.No.C1058 The description of export product alongwith quantity shall be corrected to read as under:
"Lead Acid Storage 1 No." Batteries of all types/ Battery Cells" 17. 720 Engineering Product Sl.No.C1343 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed C1343 Typewriter (Manual) with ABS Casing Top cover and Keyboard frame 1000 Nos. 1.High carbon Steel Strip (0.97 x 55 mm) 2.ABS Granules 3.Aluminium Alloy Ingots 574 kg 1250 kg 4700 kg 4.Steel wires (Tempered and hardened/ Profiles) 5.Steel Rollers 6.Steel Type sets 138 kg 8000 Nos. 45000 Nos. 18. 738 Engineering Product Sl.No.C1400 The description of import item No. 1 shall be amended to read as under: "1. Aluminium Tube of relevant size in terms of LD/O.D."
768 Engineering Table2 The engineering Table2 appearing at the end of GroupC (engineering Products) shall be deleted. 19. 869 Plastic Product Sl.No.H66 The description of the export product shall be amended to read as under: "Disposable Plastic Cups, Glasses, Plates, Trays, Bowls, Containers & Lids made of Polystyrene." 20. 960 Textile Product Sl.No.J21 The description of the export product shall be amended to read as under: "Polyester/Cotton Blended Grey/Bleached Fabrics." 21. 974 Textile Product Sl.No.J68 After import item No. 1 the following item along with quantity shall be added: 2.Raw cotton 1.22 kg/kg content in the export product. 22. 981& 982 Textile Product Sl.No.J92 In import item No. 1, the following alternative item shall be added: "OR Raw cotton for carded counts of yarn of 40s
& below 1.225kg/kg content in the export product OR Raw cotton for combed counts of yarn of 40s and below 1.289kg/kg content in and the export product OR Above 40s ". 1.325kg/kg content in the Export product 23. 982 Textile Product Sl.No.J93 In import item No. 2, the following alternative item shall be added: "OR Raw cotton for carded counts of yarn of 40s & below 1.175 kg/kg content in the export product OR
40s and below 1.270kg/kg content in the export product OR Above 40s". 1.290kg/kg content in the Export product 24. 982 Textile Product Sl.No.J94 In import item No. 1, the following alternative item shall be added: "OR Raw cotton for carded counts of yarn of 40s & below 1.225 kg/kg content in the export product OR 40s and below 1.289kg/kg content in the export product OR
Above 40s" 1.325kg/kg content in the export Product 25. 982 Textile Product Sl.No.J95 After import product No. 2, the following item along with quantity shall be added: "3. Raw cotton for carded counts of yarn of 40s & below 1.225 kg/kg content in the export product OR 40s and below 1.289kg/kg content in the export product OR Above 40s". 1.325kg/kg content in the Export product 26. 983 Textile Product Sl.No.J100 The description of the export product shall be amended to read as under: "Combed Cotton/Melange Yarn of counts 40s and below"
983 Textile Product Sl.No.J101 The description of the export product shall be amended to read as under: "Combed Cotton/Melange Yarn of counts above 40s" 28. 983 & 984 Textile Product Sl.No.J103 In import item No. 1 the following alternative item along with quantity shall be added: "OR Raw cotton for carded counts of yarn of 40s & below 1.225 kg content in the export product OR 40s and below 1.289 kg content in the export OR Above 40s ". 1.325 kg content in the export Product"
984 Textile Product Sl.No.J105 In import item No. 2 the following alternative item with quantity shall be added: "OR Raw cotton for carded counts of yarn of 40s & below 1.225 kg content in the export product OR Raw cotton for combed Counts of yarn of 40s and below 1.289 kg content in the export product OR Above 40s ". 1.325 kg content in the export Product" 30. 1000 Textile Product Sl.No.J225 In import item No. 1 the following alternative item along with quantity shall be added: "OR Wool Yarn 1.10 kg content in the export Product"
1005 Textile Product Sl.No.J243 The norms covered by this entry shall be Sl.No. Export Item Qty. Import Item Qty Allowed J243 Shawls/Scarves/Mufflers & Madeups made of 100% wool 1 kg 1.Scoured Wool OR Wool Top 1.308 kg content in the export product 1.198 kg content in the export product OR Wool Yarn 1.10 kg content in the export product 1012 Textile Product The quantity of the import item No 1
1012 Textile Product Sl.No.J300 The quantity of the import item No.1 shall be corrected to read as under: "0.90 Mtrs" 33. 1042 Miscellaneous Product Sl.No.K122 The quantity of the import item No.4 shall be corrected to read as under: "166 Sq. Mtrs" 34. 1043 Miscellaneous Product Sl.No.K123 The quantity of the import item No.4 shall be corrected to read as under: "174 Sq. Mtrs" 35. 1043 Miscellaneous Product Sl.No.K124 The quantity of the import item No.4 shall be corrected to read as under: "183 Sq. Mtrs" Annexure "B" to the Public Notice No.9 Dated: 01/05/2000 CHEMICALS AND ALLIED PRODUCTS E I Q I I Q
Sl.No. Export Item Qty. Import Item Qty. Allowed A2404 Antimony Trisulphide 99.8% purity 1 kg 1.Antimony Trioxide 2.Sodium Sulphide 0.900 kg 0.300 kg A2405 Cloxacillin Benzathine 1 kg 1.Potassium Penicillin G First Crystal 2.Penicillin G Amidase 3.3(2Chlorophenyl)5 Methyl Isoxazole4Carbonyl Chloride)(CMIC Chloride) OR i.Ortho Chloro Bezaldehyde ii.Hydroxyl Amine Sulphate iii.Methyl Aceto Acetate iv.Chloroform 1.Activated Carbon 2.Methylene Chloride 3.Acetone 4.Chloroform 5.Isopropyl Alcohol 1.645 BOU 0.863 gm 0.628 kg 0.666 kg 0.50 kg 1.332 kg 0.950 kg 100 gm 2.28kg
0.476 kg 0.952 kg 0.50 kg A2406 Ketoconazole USP 23 1 kg 1.2,4 Dichloro Acetophenone 2.Imidazole 3.1Acetyl4(4Hydroxy Phenyl) Piperazone 4.Toluene 5.Methanol 6.Dimethyl formamide 7.Acetone 8.Dimethyl Sulfoxoide 1.365 kg 1.584 kg 0.776 kg 9.12 kg 14.35 kg 0.90 kg 3.60 kg 1.566 kg A2407 2(Hydroxy Methyl) 3,5, Dimethyl4 Methoxy Pyridine (Omeprazole Intermediate) 1 kg 1.2,3,5, Tri Methyl Pyridine 2.NButanol 3.Methylene Chloride 4.Activated Carbon 5.Phosphotungstic Acid (CAT 44) 1.990 kg 4.000 kg 10.000 kg 0.200 kg 0.100 kg
A2408 4Amino2 (4(1,4 Benzodioxan2 Carbonyl) Piperazin 1 YL)6, 7 Dimethoxy auinozoline monomethane Sulfonate (Doxazosin Mesyleate) 1 kg 1.(a) 6, 7 Dimethoxy Quinazoline 2, 4 Dione (b) Dimethyl Acetamide (c) Tetrahydrofuran OR 4Amino 2Chloro 6, 7 Dimethoxy Quinazoline 1.N(1,4Benzodioxan2YL Carbonyl) Piperazine 2.Methane Sulfonic Acid 3.Dimethyl formamide 4.Methanol 2.05 kg 0.54 kg 2.83 kg 1.11 kg 1.29 kg 0.29 kg 1.80 kg 4.90 kg A2409 Loratadine 1 kg 1.3Chloro Benzyl Cyanide OR 3Chloro Benzyl Dehyde OR 3Chloro Benzyl Chloride 2.Methyl/Ethyl Nicotinide 3.4ChloroNMethyl Piperidine 8.62 kg 8.00 kg 9.21 kg 8.63Kg 1.84 kg
4.N,N dimethyl Carbonyl chloride 5.Tetrahydrofuran 5.00Kg 22.00 kg 6.Methylene Chloride 7.Acetonitrile/Dimethyl Sulfoxide 8.DiIsopropylamine/ Triethyl Amine 22.00 kg 16.50 kg 0.50 kg A2410 Carbamazepine 1 kg 1.Iminodibenzyl OR 2. (a)Ortho Nitro Toluene (b)Sodium Methoxide (c)Cyclo Hexane (d)Isopropyl Alcohol (e)Toluene (f)Methanol 3.Potassium Hydroxide 4.Bromine 1.55 kg 4.29 kg 1.19 kg 2.51 kg\ 0.52 kg 1.53 kg 2.15 kg
5.Orthodichloro Benzene 6.Toluene 7.Acetone/DMF/ Ethylene Dichloride 0.93 kg 0.39 kg 1.30 kg 1.21 kg 2.00 kg A2411 Ceramic Colour Yellow orange (containg : Antimony Trioxide 28.8%) 1 kg 1. Antimony Trioxide 0.297 kg A2412 Aceto Acet Ortho Anisidine 1 kg 1.Acetic Acid 2. Ortho Anisidine 0.855 kg 0.745 kg A2413 PVC Folder/ Polypropylene Files/ ZIP Lock Bag 1 No. 1.Relevant PVC Polypropylene Sheet 2.Relevant Book Binding Board 3.Relevant components as Contain the export product a.Paper Filling Machanism 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product Net to net Net to net Net to net
b.Metal Rado Slots c.Metal Fingerings d.Metal Riverts Net to net A2414 PVC Folder/ Polypropylene Files/Zip Lock Bag 1 No. 1.Relevent PVC/Polypropylene sheet 2.Relevent Book Binding Board 3.Relevent components as contain the export product. a)Paper Filling Mechanism b)Metal Rado Slots c)Metal Fingerings d)Metal Riverts 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product Net to net Net to net Net to net Net to net A2415 Brief Card 1 MT 1.Wood Pulp 2.Calcium Carbonate Clay 3.Latex 4.CMC (Carboxy Methyl Cellulose) 0.9525 kg 0.019 kg 0.0076 kg 0.004 kg
5.Wetend Chemicals 6.Laminating Chemicals 7.Stretch Film 8.Poly Kraft Paper 0.0600 kg 0.049 kg 0.0013 kg 0.015 kg A2416 Diphenyl Isodecyl Phosphite (DPOP) 1 kg 1.Phenol 2.Isodecyl Alcohol 0.558 kg 0.419 kg A2417 C8(3Hydroxy Naphthalene2 Carbonyl –(3 Morpholine– PropylAmine) 1 kg 1.4 (3 Amino Propyl) Morpholine 2.BON Methyl Ester 0.600 kg 0.841 kg A2418 Irgaphor Green 1736 1,4 Tetrakis (2,4 Dimethylpenthyl 3 oxo) 1,4 Tribromo1,4 (Formyl) Phthalocynate Palladium(II) 1 kg 1.2,4 Dimethyl – 3Pentanol 2.Sodium Hydride (60% dispersion in paraffin) 3.Palladium chloride 4.NMethyl Formanilide 1.206 kg 0.415 kg 0.238 kg 1.178 kg A2419 Irgaphor Green HW 627 (Tetra (2,4 Dimethyl3 Pentyloxy) 1 kg 1.2,4, Dimethyl3 Pentanon 2.Sodium Hydride (60% dispersion in paraffin) 1.022 kg 0.352 kg
Palladium Phthalocyanine) 3.Palladium Chloride 0.183 kg A2420 Novasol Yellow G liquid (Solvent Yellow 124) (Dye content 55%) 1 kg 1.Vinyl Isobutyl Ether 2.Aromatic Hydrocarbon Solvent C10C11 (Shellsol AB Aromatic 150) 0.517 kg 0.562 kg A2421 Opaque white polyester chip 1 kg 1.DMT 2.MEG 3.Barium Sulphate 4.DMIP 5.Antifoam 6.Calcium Acetate 7.Manganese Acetate 8.TPP 0.819 kg 0.297 kg 0.185 kg 0.014 kg 0.00001 kg 0.0007 kg 0.000125 kg 0.0014 kg A2422 Black Centred Board 1 MT 1.Wood Pulp 2.Calcium Carbonate Clay 3.Latex (5% concentration) 4.Wet end chemicals Retention Aid, AKD Dimer of Fatty Acid AKD Emulsifier Resin 216, AKD 0.992 kg 0.122 kg 0.0114 kg 0.0505 kg
Stabiliser 472 Optical Brightening Agent Cutionic Starch Oxide Starch 5.Coating Chemicals (Carboxy Methyl Cellulose, Lubricant, Insolubilizer, Optical brightening Agent, Dispersant, NaOH, coating starch) 6.Laminating Chemicals (Starch, Carboxy, Methyl Cellulose Insolubilizer) 7.Stretch Film 8.Polykraft paper 0.0173 kg 0.0196 kg As per packing policy A2423 Polytetrafluoroethylene Dispension (Emulsion Grade, TFE content 59.5+/0.5%) 1 MT 1.Chloroform 2.Perfluorooctanic Acid (FC26) 4.3 MT 0.0075 MT A2424 Silicone Polymer RS 103 (Trimethyl Sliyl Vinyl Methyl Polysiloxame) 1 kg Residual Polymer Mixture (Average content95%) 1.2 kg A2425 PVC Braided Hoses with Synthetic Yarn 1 kg 1.PVC Resin 2.Dioctyl Ohthalate 0.7 kg 0.250 kg
(Nylon/Polyester) 3.PVC Stabilizer 4.Relevant Synthetic Yarn (Nylon/ Polyester) 0.030 kg 0.070 kg N B: 1. The quantity of inputs at S.No. 1,2 & 3 are for PVC compound weight of 933 gms in the export product. For any variation in the PVC compound weight the items at S.No. 1,2 & 3 shall be allowed adopting the following formula: AXB 933 Where A= Quantity allowed for 933 gm PVC compound B= Weight of PVC compound in the export product Note: 2 The quantity of relevant Synthetic yarn at S. No. 4 is for 67 gm of yarn in the export product. For any variation in the relevant yarn weight, the relevant yarn shall be allowed adopting the following formula: CXD 67 Where C= Quantity allowed for 67 gm yarn content in the export product D= Weight of relevant Synthetic yarn in the export product A2426 Glyphosate 41% W/WSL 1 kg 1.Isopropyl Amine Salt of Glyphosate Tech. (62%) 2.Surfactant (Inert Polyoxyethylene) 0.668 kg 0.150 kg A242 1 h l 6 d 4 1 k 1 h l C 0 688 k
A2427 1Ethyl6Hydroxy 4 Methyl2Pyridine 3 Carbonylamide 1 kg 1.Ethyl Cyanoacetate 2.Mono ethyl Amine 3.Methyl Aceto acetate 0.688 kg 0.315 kg 0.692 kg A2428 Nylon 6/66 Co polymer mono filament yarn (soft grade) 1 kg 1.Nylon 6/66 Copolymer Chips 2.Antioxidant 3.Surface Active Agent 4.Finish Oil 5.Relevant PP/PS granules for bobbins 1.05kg/kg 0.002 kg 0.001 kg 0.001 kg 1.05 kg/kg content in the export product Note: For the export of Nylon 6/66 copolymer monofilament yarn (soft grade) upto 500 mtrs length in smaller disposable bobbins/ coils, nylon 6/66 copolymer chips shall be allowed at the rate of 1.08 kg/kg instead of 1.05 kg/kg in the export product. Annexure "C" to the Public Notice No.9 Dated: 01/05/2000
ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed C1522 Pneumatic Tool Balancer with balance Capacity above 75 1b (34.1 kg) upto and including 210 1b (95.5 kg). 1 No. 1.Relevent Bearing Ball 2.Relevant Gear Worm 3.Relevant Shaft worm gear 4.Relevant Retainer ball (thrust) 5.Relevant Race Retainer 6.Relevant Ball Race 7.Relevant Worm 8.Relevant Ball Bearing 9.Relevant Guide Plate 10.Relevant Stop Shield 1 No. 1 No 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
11.Relevant Housing Cable drum 12.Relevant Stop Assembly 13.Relevant Hook Assembly Swivel 14.Relevant Housing cover 15.Relevant Cover 16.Relevant Hub main spring 1 No. 2 Nos. 17.Relevant Assembly Main Spring and retainer 18.Relevant Hook 19.Relevant Cable 20.Relevant Clamp cable 21.Relevant Separator plate 22.Relevant Housing cable drum 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
23.Relevant Main spring anchor Note: The import of components shall be allowed on net to net basis with accountability clause. C1523 Pneumatic Tool Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8"hex x 3 ¼" (22.2 mm x 82.6 mm) without muffler. 1 No. 1.Relevant Cylinder 2.Relevant Sleeve 3.Relevant Retainer Latch 4.Relevant Latch Bushing 5.Relevant Handle & Bush Assembly 6.Relevant Lever Chit 7.Relevant Lever Pin 8.Relevant Throttle Valve 9.Relevant Retainer Latch Pin 10.Relevant Valve 11.Relevant Piston 12.Relevant Upper valve case Lid 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
13.Relevant Lower Valve case Lid 14.Relevant Valve Case 15.Relevant Back Head Bolt 1 No. 2 Nos. Note: The import of components shall be allowed on net to net basis with accountability clause. C1524 Pneumatic Tool Clay Digger/ Utility Hammer (picks) Latch Retainer with Chuck 7/8"hex x 3 ¼" (22.2 mm x 82.6 mm) with muffler. 1 No. 1.Relevant Cylinder 2.Relevant Sleeve 3.Relevant Retainer Latch 4.Relevant Latch Bushing 5.Relevant Handle & Bush Assembly 6.Relevant Lever Chit 7.Relevant Lever Pin 8.Relevant Throttle Valve 9.Relevant Retainer Latch Pin 10.Relevant Valve 11.Relevant Piston 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
12.Relevant Upper valve case Lid 13.Relevant Lower Valve case Lid 1 No. 1 No. 14.Relevant Valve Case 15.Relevant Back Head Bolt 16.Relevant HoodMuffler complete 1 No. 2 Nos. 1 No. Note: The import of components shall be allowed on net to net basis with accountability clause. C1525 Pneumatic Tool Balancer with balance capacity upto 75 lb (34.1 kg) 1No. 1.Relevent Main Spring Anchor 2.Relevent Bearing Ball 3.Relevent Drum cable Assembly 4.Relevent Gear worm 5.Relevent Shaft worm gear 6.Relevent Retainer ball(Thrust) 7.Relevent Race Retainer 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
8.Relevent Ball race 9.Relevent worm 10.Relevent ball bearing 11.Relevent Guide plate 12.Relevent stop shield 13.Relevent Housing cable drum 14.Relevent stop assembly 15.Relevent Hook Assembly Swivel 16.Relevent cover 17.Relevent Hub main spring 18.Relevent Assembly main spring and retainer 19.Relevent hook 20.Relevent cable 21.Relevent Clamp cable 22.Relevent Latch 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No.
Note: The import of components shall be allowed on net to net basis with accountability clause. C1526 Pneumatic Tool Reversible Drill with the speed of 350 R.P.M. and above upto and including 750 R.P.M. 1 No. 1.Relevent Air Handle Cap 2.Relevent Valve 3.Relevent Live air Handle sleeve 4.Relevent Governer plunger 5.Relevent Governer stop pin 6.Relevent Governer bushing 7.Relevent Governer weight 8.Relevent Governer body 9.Relevent Governer pin 10.Relevent Reverse sleeve 11.Relevent ball bearing 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No.
12.Relevent dead handle 13.Relevent Universal Joint 14.Relevent round plug 15.Relevent end plate 16.Relevent ball bearing 17.Relevent Liner 18.Relevent rotor 19.Relevent spindle collar 20.Relevent end plate 21.Relevent spindle gear 22.relevent gear case 23.Relevent collar 24.Relevent gear pinion 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No.
25.Relevent ball bearing 26.Relevent sleeve 27.Relevent oil regulating plug 28.Relevent dowel 29.Relevent muffler cover 30.Relevent feed post 31.Relevent bearing 32.Relevent feed sleeve handle 33.Relevent transfer plate 34.Relevent cylinder cap 35.Relevent spindle 36.Relevent feed sleeve centre 37.Relevent feed sleeve 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 3 Nos. 1 No. 1 No.
38.Relevent socket shank 39.Relevent dowel 40.Relevent cylinder & bushing assembly 41.Relevent live air handle stem & bush C1527 Pneumatic Tool Non Reversible Drill with the speed of 350 RPM and above upto and including 750 RPM. 1 No. 1.Relevant Cap 2.Relevant Valve 3.Relevant Live Air handle sleeve 4.Relevant Adaptor Flange 5.Relevant Governor bushing 6.Relevant Governor weight 7.Relevant Governor body 8.Relevant Governor pin 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No.
9.Relevant cylinder 10.Relevant Ball Bearing 11.Relevant Dead Handle 12.Relevant End Plate 13.Relevant Ball Bearing 14.Relevant throttle roller protector 15.Relevant Cylinder liner 16.Relevant Rotor 17.Relevant Spindle collar 18.Relevant end plate 19.Relevant Spindle gear 20.Relevant Gear case 21.Relevant Collar 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No 2 Nos.
22.Relevant Gear Pinion 23.Relevant Ball Bearing 24.Relevant Spindle 25.Relevant Bearing 26.Relevant Transfer Plate 27.Relevant Cylinder cap 28.Relevant Governor Stop Pin 29.Relevant G Plunger 30.Relevant Dowel 31.Relevant Dowel 32.Relevant Stem & Bushing Assembly 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 3 Nos. 1 No. 1 No. Note: The import of components shall be allowed on net to net basis with accountability clause. C1528 Pneumatic Tool Reversible Drill with the speed above 100 RPM . 1.Relevant Centre 2.Relevant Bushing 3.Relevant end plate 1 No. 1 No. 1 No.
upto and including 350 RPM. 4.Relevant Feed Post 5.Relevant Rotor 6.Relevant Liner 7.Relevant rotor housing assembly 8.Relevant Plate 9.Relevant Ball Bearing 10.Relevant spindle gear 11.Relevant Gear case assembly 12.Relevant throttle valve 13.Relevant end Plate 14.Relevant Gear Stud 15.Relevant Ball Bearing 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 16.Relevant Valve cage 17.Relevant Valve pin 18.Relevant Bearing clamp nut 1 No. 1 No. 1 No.
19.Relevant Governor Lever 20.Relevant Governor body 21.Relevant Governor push pin 22.Relevant Ball Bearing 23.Relevant Nut 24.Relevant Governor weight 25.Relevant Muffler 26.Relevant Transfer Plate 27.Relevant Collar 28.Relevant roller race 29.Relevant roller bearing assembly 30.Relevant Retainer washer 31.Relevant packing nut 32.Relevant extractor pin 33.Relevant gear pinion 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No.
34.Relevant internal gear 35.Relevant internal gear 36.Relevant Ball Bearing 37.Relevant Ball Bearing 38.Relevant Dead handle 39.Relevant live air handle stem assembly 1 No. 1 No. 2 Nos. 3 Nos. 1 No. 1 No. 40.Relevant Sleeve 41.Relevant set screw 42.Relevant throttle valve 43.Relevant throttle cap 44.Relevant seat 45.Relevant universal joint 46.Relevant sleeve 47.Relevant retainer sleeve 48.Relevant protection sleeve 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
49.Relevant throttle valve plate 50.Relevant ball bearing 51.Relevant cylinder cap 52.Relevant Feed sleeve handle 53.Relevant Screw 54.Relevant Spindle 55.Relevant Bearing spacer 56.Relevant Dowel 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. Note: The import of component shall be allowed on net to net basis with accountability clause. C1529 Pneumatic Tool Reversible Drill with the speed upto 100 R.P.M. 1 No. 1.Relevant Centre 2.Relevant Bushing 3.Relevant end plate 4.Relevant Feed Post 1 No. 1 No. 1 No. 1 No. 1 No.
5.Relevant Rotor 6.Relevant Liner 7.Relevant Rotor housing assembly 8.Relevant Dead Handle 9.Relevant Plate 10.Relevent Ball Bearing 11.Relevent throttle valve 12.Relevent end plate 13.Relevent gear stud 14.Relevent ball bearing 15.Relevent nut 16.Relevent muffler 17.Relevent protection sleeve 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
18.Relevent governer lever 19.Relevent governer push pin 20.Relevent ball bearing 21.Relevent nut 22.Relevent Muffler 23.Relevent protection sleeve 24.Relevent throttle cap 25.Relevent roller bearing assembly 26.Relevent packing nut 27.Relevent ball bearing 28.Relevent ball bearing 29.Relevent transfer plate 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No.
30.Relevent cylinder cap 31.Relevent feed sleeve handle 32.Relevent throttle valve 33.Relevent screw 34.Relevent roller race 35.Relevent retainer washer 36.Relevant throttle valve plate 37.Relevant seat 38.Relevant Collar 39.Relevant sleeve 40.Relevant Retainer sleeve 41.Relevant sleeve 42.Relevant Universal Joint 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 4 Nos.
43.Relevant Extractor Pin 44.Relevant Governor Body 45.Relevant Spindle 46.Relevant Bearing spacer 47.Relevant Internal gear 48.Relevant gear pinion 49.Relevant internal gear 50.Relevant spindle gear 51.Relevant Governor weight 52.Relevant set screw 53.Relevant Dowel 54.Relevant Live air handle stem assembly 1 No. 2 Nos. 1 No. 1 No. 2 Nos.
55.Relevent gear case assembly 56.Relevent ball bearing Note : The import of components shall be allowed on net to net basis with accountability clause. C1530 Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil, Dynamo Meter, Bimetallic Reed Type, Namely Volt Meter, Ammeter, Frequency Meter WATT meter, multimeters Insulation testers, Maximum Demand Indicator, Power factor meter. 1 No. 1.Plastic Moulding Powder: a.ABS b.Polycarbonate c.Polyphenylene Oxide d.Polyacetal e.Polycarbonate f.Polyamide g.Phenol Formaldehyde (Bakelite) Power and Moulded components thereof 2.Silicon Oils 3.Industrial Jewels with screws 4.Pivots 5.Hair Springs 50 gms Net+5% wastage 1 gm 2 Nos. 2 Nos. Net to net
6.Super Enamelled Copper wire 7.Duralumin Rods Free Cutting Aluminium Rods, Capillary Tubes: a. Copper Bars/strips b. Manganin wire/Rods c. Eureka Wire/ Rods Net to net Net+2% wastage 8.Magnet Centre Core 9.Coil former 10.Mumetals Permalloy strips & components thereof 11.Pointers/Pointer Arms 12.Tant Bands/ Ligaments 13.Barllium Copper/ Phospher/Bronze strips 14.Aluminum Die Castings 15.Bimetallic Springs Net to net 1 No. Net to net Net to net Net to net Net+5% wastage (Qty restricted to 20 gms) Net to net 2 Nos.
16.Springs Steel Strips 17.Transistors, Capacitors, IC’s & other electronic Components not covered by Other input entries 18.Yoke 19.Hybride Circuits 20.Zener Diodes 21.Yoke Holder 22.Lower Boss/under Boss Net to net Net to net 1 No. 1 No. 2 Nos. 1 No. 1 No. Annexure "D" to the Public Notice No.9 Dated: 01/05/2000 LEATHER PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed G47 Finished Leather Sofa Cover (Stitched) 1000 Sq. ft. 1.Relevant lining 1.05 sq.mtr./ sq. mtr content in
2.Polyester wading 3.Zippers 4.Velcro 5.Runner (slider) 6.Relevant double fused tape the export product 1.05 sq.mtr./ sq. mtr content in the export product Net + 1% wastage Net + 2% wastage Net + 1% wastage Net + 1 % wastage Note: 1. The items thread and needle shall not be allowed 2. The norms for the chemical items are to be allowed as per SION G7 of furnished Leather. Annexure "E" to the Public Notice No.9 Dated: 01/05/2000
TEXTILE PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed J312 Wool/Silk blended Shawls/Scarves/Mufflers and madeups kg 1.Scoured wool OR Wool Top OR Wool Yarn 1.Spun Silk Yarn 1.31 kg/kg content in the export product 1.21 kg/kg content in the export product 1.10 kg/kg content in the export product 1.05 kg/kg content in the export product
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.