Fixation/Modification of Standard Input Output Norms
ADVANCE COPY (TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART‐I‐SECTION‐1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE PUBLIC NOTICE NO.18(RE‐98)/1997‐2002 NEW DELHI : DATED 22ND JUNE, 1998
Subject: Fixation/Modification of Standard Input Output Norms
Attention is invited to Paras 7.8, 7.9 and 7.10 of Handbook of Procedures, Vol.1, 1997‐2002, published under the Ministry of Commerce Public Notiice No.1/1997‐2002 dated 31.3.1997 and Handbook of Procedure, Vol.2, 1997‐2002 published under the Ministry of Commerce Public Notice No.2/1997‐2002 dated 31.3.1997. 2. In the statement of Standard Input‐Output Norms as contained in the Handbook of Procedure, Vol.2, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 3. In the statement of Standard Input‐Output Norms, following additions shall be made at appropriate places as mentioned below:‐ CHEMICALS AND ALLIED PRODUCTS After Entry No.A‐2062, the new entries from Sl.No.A‐2063 to A‐2079 shall be added as per Annexure "B" to this Public Notice. ELECTRONICS PRODUCTS After Entry No.B‐221, the new entries from Sl.No.B‐222 to B‐223 shall be added as per Annexure "C" to this Public Notice. ENGINEERING PRODUCTS After Entry No.C‐1344, the new entries from Sl.No.C‐1345 to C‐1358 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After Entry No.H‐382, the new entries from Sl.No.H‐383 to H‐386 shall be added as per Annexure "E" to this Public Notice.
MISCELLANEOUS PRODUCTS After Entry No.K‐111, the new entry as Sl.No.K‐112 shall be added as per Annexure "F" to this Public Notice. This issues in public interest. Sd/ (N.L.LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE Issued from File No.01/86/40/117/AM98/DES‐I Annexure "A" to Public Notice No. 18 Dated: 22.6.98 AMENDMENTS/CORRECTIONS ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sl. Page Reference Amendments/Corrections No. No. (1) (2) (3) (4) 1. 17 Chemicals & Allied The description of the alternative Products import item 1.a) alongwith quantity ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ shall be amended to read as under:‐ Sl.No.A67 "1.a) Potassium Penc‐ 1.495 Kg or illin G First 2.36 BOU Crystal". 2. 23 Chemicals & Allied The quantity of import item 1 shall Products be amended to read as "1.93 kg or ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3.05 BOU". Sl.No.A108 3. 76 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Violet 23" Sl.No.A509 4. 76 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Red 146". Sl.No.A510 5. 76 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Yellow 83". Sl.No.A511
6. 100 Chemicals & Allied The description of the export Products product shall be amended to read as ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ under:‐ Sl.No.A690 "K. Acid (2 Napthylamine 3,6,8 Tri‐ sulphonic Acid)". 7. 110 Chemicals & Allied In import item 4, following alter‐ Products native item with quantity shall be ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ added:‐ Sl.No.A797 "OR Alkyl Benzene ‐ 0.195 kg". 8. 111 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Orange 5". Sl.No.A802 9. 111 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Red 57:1". Sl.No.A807 10. 111 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Red 8". Sl.No.A808 11. 134 Chemicals & Allied The norm covered by this entry shall Products be deleted. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sl.No.A976 12. 147,148 Chemical & Allied 1. The description of the export 149 Products product covered under S.No.A1050 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ shall be substituted by the Sl.Nos.A1050, 1053 following:‐ & 1055 "Ordinary Portland Cement/ Portland Cement Pozzolona/ Portland Slag Cement". 2. Norms covered by S.Nos.A1053 & A1055 shall be deleted. 3. After Note 1, in Sl.No.A1050, the following Note shall be added:‐ "2. In case of Portland Slag Cement, the quantity of Coal allowed is per MT of Ordinary Portland Cement contained in the export product."
13. 151 Chemicals & Allied The description of the export Products product shall be amended to read as ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ under:‐ Sl.No.A1082 "Calcium Hypochlorite (Stable Bleaching Powder)". 14. 234 & Chemicals & Allied 1. After import item 4, the 235 Products following additional items with ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ quantity shall be added:‐ Sl.No.A1757 "5. Enzyme like ‐ 0.006 kg Savinase/ with net Lipolase/GCI content in Clazinase export product. 6. Distyryl ‐ 0.002 kg Diphenyl with net content in export product." 2. Below this entry, the following note shall be added:‐ "Note: Items 5 & 6 will be allowed only when these are reflected in the description of the export product." 15. 242 & Chemicals & Allied At the end of the description of the 243 Products export prdoduct, following shall be ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ added:‐ Sl.No.A1802 "d)Tongue & Clevis Type Disc Insulator". 16. 255 Chemicals & Allied After import item 1, the following Products alternative item with quantity shall ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ be added:‐ Sl.No.A1889 "OR (Introduced vide Alumino Silicate ‐ 0.019 kg Public Notice No.13 Catalyst". dated 5.6.1997) 17. 255 Chemicals & Allied The description of the export Products product shall be corrected to read ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ as "Pigment Red 23". Sl.No.A1900 (Introduced vide Public Notice No.13 dated 5.6.1997) 18. 255 Chemicals & Allied At the end of the description of
Products import item 3, the following shall ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ be added:‐ Sl.No.A2062 ",Bonding/Coupling Agent". (Introduced vide Public Notice No.5 (RE‐98) dt.15.4.98) 19. 308 Electronics Products 1. The description of import items ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 8, 9, 10, 13, 21 and 22 shall be Sl.No.B111 amended to read as under:‐ "8. Batteries/Rechargeable ‐ Lithium Batteries 9. Incandescent Lamp/Lead Lamp/ Microfilament Lamp 10. LCD/LCD Module/LCD Assembly 13. Integrated Circuits/DC‐DC Converter/Voltage Detector 21. Crystal Oscillator/Quartz Oscillator 22. Adhesive/Non‐Adhesive Paper Labels Adhesive/Non‐Adhesive Plastic Labels". The quantities of these item will remain unchanged. 2. After import item 26, following additional items with quantity shall be added:‐ "27. Antenae ‐ Net+2% 28. Ceramic Discri‐ ‐ Net+2% minator 29. Diodes ‐ Net+2% 30. Zener Diodes ‐ Net+2% 31. Filters ‐ Net+2% 32. Ceramic Filters ‐ Net+2% 33. Crystal Filters ‐ Net+2% 34. Saw Filter ‐ Net+2% 35. Motor (Coreless ‐ Net+2% DC Motor) 36. Resonators ‐ Net+2% 37. Ceramic ‐ Net+2% Resonators 38. Crystal ‐ Net+2% Resonators 39. Switches ‐ Net+2% 40. Transducer ‐ Net+2% 41. Transducer ‐ Net+2% Buzzer 42. Tape Anti Peel ‐ Net to
Strip net. 43. Tape LCD ‐ Net to Protictive net. 44. Packing ‐ Net to Material net. 45. Slotted Inserts ‐ Net to net. 46. Outer Boxes ‐ Net to net." 20. 344 Engineering Products 1. The description of the export ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read Sl.No.C25 as "Cable Needle (Aluminium)". 2. Import item 2 with quantity shall be deleted. 21. 344 Engineering Products 1. The description of the export ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read Sl.No.C26 as "Cable Hook (Aluminium)". 2. Import Item No.2 alongwith quantity shall be deleted. 22. 345 Engineering Products 1. The description of the export ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read Sl.No.C30 as "Stitch Holder (Aluminium)". 2. Import item No.2 alongwith quantity shall be deleted. 23. 436 & Engineering Products 1. The description of the export 437 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read Sl.No.C434 as "Circular Knitting Pins (Aluminium)". 2. Import item 2 shall be amended to read as under:‐ "2. Nylon Monofilament Yarn of relevant denier (Relevant Nylon Grade in export i.e. 6 or 66 to be allowed)". 24. 457 Engineering Products The quantity of import item shall be ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ amended to read as "1610 kgs". Sl.No.C481 25. 466 & Engineering Products The description of the export 467 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be corrected to read Sl.No.C502 as under:‐ "Magnesite Chrome/ Magnesia Co‐clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars"
26. 489 to Engineering Products After import item 3 against these 491 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ entries, following additional item Sl.Nos.C535, C538, with quantity shall be added:‐ C542 and C543 "4. Resistant Laquer ‐ 1.42 kg/kg content in the export product." 27. 509 Engineering Products In the description of import item 1, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ affter the alternative item `M.S. Sl.No.C676 Billets/Bloms' following alternative item with quantity shall be added:‐ " OR Non‐Alloy Steel ‐ 1.07 kg". Wire Rods 28. 511 & Engineering Products The description of the export 512 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read as Sl.No.C688 under:‐ "Industrial Roller/Motor Cycle/ Automotive Timing Chain including spares (Upto 3/4" Pitch Size)". 29. 534 Engineering Products The norms covered by this entry Products shall be substituted by the ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ following:‐ Sl.No.C837 Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) C837 a)Stainless Steel 1 MT 1. Stainless Steel 1.20 MT Welded and Cold Coils/Strips Drawn Tubes and Pipes b)Stainless Steel 1 MT 1. Stainless Steel 1.25 MT Welded Corrugated Coils/Strips Hose Pipes 30. 534 Engineering Products The norms covered by this entry Products shall be substituted by the ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ following:‐ Sl.No.C838 Sl. Export Item Import Item No. Name Qty. Name Qty.
(1) (2) (3) (4) (5) C838 a)Stainless Steel 1 MT 1. Stainless Steel 1.08 MT/MT Wire Mesh/Netting Wire of relevant content in Grade & Diameter the export product. b)Stainless Steel 1 MT 1. Stainless Steel 1.10 kg/kg Wire Woven Tube Wire of relevant content in Hose Pipes Grade & Diameter the export product. 31. 583 Engineering Products After import item 1, following Products alternative item with quantity shall ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ be added:‐ Sl.No.C1046 "OR Spring Steel Wire ‐ 1.01 kg". 32. 658 General Note for At the end of this Note, the Leather & Leather following sentence shall be added:‐ Products "In addition to quantity limit ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ fixed, the CIF value of Dyes shall Note 6 not exceed 2% of FOB value of exports." 33. 659 to Leather & Leather Note 1 below these entries shall be 717 Products deleted. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sl.Nos.G1,G2,G11, G19,G20,G21,G27, G36,G38,G41 & G42 34. 659 to Leather & Leather Note 2 below these entries shall be 717 Products deleted. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sl.Nos.G3,G8,G9, G10,G12,G13,G14, G15,G22,G23,G24, G25,G26,G28,G29, G35,G37 & G40 35. 704 & Leather & Leather Note 1 to 7 below this entry shall 705 Products be deleted. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sl.No.G33 36. 710 & Leather & Leather Note 1 to 6 below this entry shall 712 Products be deleted. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Sl.No.G39 37. 761 Plastic Products 1. The description of the export ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ product shall be amended to read Sl.No.H199 as under:‐ "Polyurethane Foam Products". 2. The quantity of import item Nos.1 & 2 shall be amended to read as "0.673 kg" and "0.471 kg" respectively. 38. 858 Miscellaneous 1. The description of the export Products product shall be amended to read ‐‐‐‐‐‐‐‐‐‐‐‐‐ as under:‐ Sl.No.K20 "Colour Roll Film Type 135/36 exposure‐100/200/400 (1 Roll in a Pack)". 2. The description of the import item 1 shall be amended to read as under:‐ "Jumbo Rolls of Amateur Color Roll Films of 100/200/400 relevant ASA". 39. 867 Miscellaneous 1. The word "Dyed" shall be added in Products the beginning of the export ‐‐‐‐‐‐‐‐‐‐‐‐‐ product. Sl.No.K60 2. After import item 3, following alternative item with quantity shall be added:‐ "OR Polyester Flat Yarn ‐ 0.255 kg" 3. After adding above item, following additional item with quantity shall be added:‐ "4. Dyes ‐ 0.424 kg". (100% Strength) ******* Annexure "B" to Public Notice No. 18 Dated: 22.6.98 CHEMICALS AND ALLIED PRODUCTS Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) A2063 Pigment Yellow‐13 1 kg 1. Ortho Nitro Chloro 0.482 kg
(CI No.21100) Benzene 2. Methanol 0.072 kg 3. Sodium Nitrite 0.165 kg 4. 2,4‐Aceto Acet‐ 0.494 kg oxylidide A2064 Pigment Red‐3 1 kg 1. Meta Nitro Para 0.522 kg (CI No.12120) Toluidine 2. Beta Naphthol 0.494 kg 3. Sodium Nitrite 0.247 kg A2065 Pigment Red 31 1 kg 1. Naphthol AS‐BS 0.584 kg (CI No.12360) 2. Sodium Nitrite 0.152 kg A2066 Pigment Red 48:1 1 kg 1. 6‐Amino‐4‐Chloro‐ 0.460 kg (CI No.15865:1) M‐Toluene Sul‐ (Pigment content phonic Acid Minimum 92%) (2B Acid) 2. Sodium Nitrite 0.132 kg 3. 3‐Hydroxy‐2‐ 0.380 kg Naphthoic Acid (BON Acid) 4. Gum Rosin 0.080 kg A2067 Pigment Orange‐13 1 kg 1. Ortho Nitro Chloro 0.597 kg (CI No.21110) Benzene 2. Methanol 0.078 kg 3. Sodium Nitrite 0.236 kg 4. 1‐Phenyl,3‐Methyl, 0.569 kg 5‐Pyrazolone 5. Caustic Soda 0.147 kg Flakes A2068 Pigment Orange‐34 1 kg 1. Ortho Nitro Chloro 0.572 kg (CI No.21115) Benzene 2. Methanol 0.075 kg 3. Para‐Tolyl 0.638 kg 3‐Methyl 5‐Pyra‐ zolone 4. Sodium Nitrite 0.226 kg A2069 Iopamidol Tech. 1 kg 1. 2,4,6 Tri‐Iodo‐5‐ 1.67 kg Amino Isophthalyl‐ chloride (Atipa‐ chloride) OR 1. a)Iso Phthalic 0.67 kg Acid b)Iodine 1.29 kg c)Isopropyl 0.17 kg
Alcohol 2. 2‐Amino‐1‐3‐Pro‐ 0.18 kg pandiol (Serinol) OR 2. a)Nitro Methane 0.20 kg b)Para Formal‐ 0.19 kg dehyde c)Iso Propyl 0.36 kg Alcohol d)Methanol 0.51 kg 3. S‐(‐)2‐Acetoxy 0.42 kg Propionyl Chloride A2070 Pigment Red‐170 1 kg 1. P.Amino Benzamide/ 0.333 kg 4‐Amino Benzamide/ 4‐Benzamide Aniline 2. Sodium Nitrite 0.169 kg 3. Naphthol ASPH 0.748 kg (3‐Hydroxy 2‐Na‐ phtho Phenetidine) A2071 Pigment Red 4 1 kg 1. Caustic Soda 0.162 kg 2. Beta Naphthol 0.463 kg 3. Ortho Chloro Para 0.554 kg Nitro Aniline 4. Sodium Nitrite 0.241 kg A2072 Tartaric Acid 1 kg 1. Maleic Anhydride 0.78 kg 2. Hydrogen Peroxide 0.54 kg 50% W/W 3. Sodium Tungstate 0.17 kg Catalyst 4. Thio Urea 0.025 kg 5. Activated Carbon 0.010 kg A2073 Phenyl‐Glyoxalic‐ 1 kg 1. Hydrazine‐Hydrate 0.81 kg Acid‐Hydrazide‐ (80%) Acetyl‐Hydrazone A2074 Tetra Propyl 1 kg 1. N‐Propanol 0.326 kg Ammonium Bromide 2. Triphenyl Amine 0.664 kg 3. Methyl Ethyl 0.500 kg Ketone A2075 Hand Made Glass 100 kgs 1. Soda Ash 10.0 kgs Beads 2. Potassium 13.9 kgs Carbonate 3. Borax 17.4 kgs 4. Antimoney 0.7 kg
Trioxide 5. Lithium Carbonate 6.95 kgs 6. Arsenic Trioxide 0.33 kg 7. Venetian Glass 2.0 kgs Chip 8. Venetian Glass Rod 1.25 kg 9. Aventurine Block 16.0 kgs Glass 10. Glass Enamel 0.75 kg 11. Colouring Oxide: 4.00 kgs (Any of the following one or a combination of the Oxides limited to a maximum of 4 kgs) a)Selenium Metal Powder b)Cadmium Sulphide c)Cobalt Oxide d)Copper Oxide A2076 Gemfibrozil 1 kg 1. 2,5 Xylenol 1.18 kg 2. 1‐Bromo 3‐Chloro 1.51 kg Propane 3. Potassium 1.32 kg Carbonate 4. Iso Butyronitrile 0.63 kg 5. Tetra Hydrofuran 2.25 kgs A2077 Zinc Picolinate 1 kg 1. Alpha Picoline 1.1 kg 2. Potassium Permag‐ 5.5 kgs nate 3. Zinc Sulfate 1.01 kg A2078 Benzalkonium 1 kg 1. Dimethyl Lauryl 0.325 kg Chloride 50% Amine Active matter 2. Benzyl Chloride 0.184 kg A2089 Chloroquine 1 kg 1. Ethoxy Methylene 0.797 kg Phosphate Malonic Acid Ester (EMME) 2. Novaldiamine 0.411 kg ******* Annexure "C" to Public Notice No. 18 Dated: 22.6.98 ELECTRONIC PRODUCTS
Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) B222 Electronic Fan 1 No. 1. a)Polycarbonate 0.015 kg Regulators and b)CRCA Sheet 0.200 kg Light Dimmers c)Super Enammelled 0.97 kg Copper Wire 35/45 SWG 2. a)Integrated | Circuits (ICs) | b)TRIAC |Net to net. c)DIAC | d)Resistor | e)Cermic Fuse | Note: CRCA Sheet and Super Enamelled Copper Wire to be allowed only for heavy duty type of Light Dimmers above 1 KVA power rating. B223 Electronic Door 1 No. 1. High Impact 62 gms Bells Polysterene 2. a)Integrated | Circuits (ICs) | b)Speaker |Net to net. c)Transistor | d)Diodes | e)Capacitors | ******* Annexure "D" to Public Notice No. 18 Dated: 22.6.98 ENGINEERING PRODUCTS Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) C1345 Stabilizers 110/ 1 No. 1. Transistor 148 | 220 V 2. Transistor 187 | 3. Diode ‐ 4007 | 4. Capacitors |Net to net. 100/25V | 5. Light Emitting |
Diode 6mm | 6. BWG 22x8 inch X | 4 inch 13A Ceramic| Fuse | 7. Super Enamelled 110 gms Copper Wire 30/33/ 38 SWG 8. Cold Rolled Cold 425 gms Anealled (Mild Steel) C1346 Zinc Builders 1 kg 1. Zn‐Al Alloy (94%, 1.10 kg/kg Hardware ‐ 4% by wt. resp.) content in Pressure Die cast Ingot or Scrap the export product. 2. Clad Concentrate/ Upto 2% of Solvent Repleni‐ FOB value sher/Emulsion etc. export. C1347 Mica Strips 1 kg 1. Mica Sheet 1.10 kg (100% Mica) (100% Mica) C1348 Auto Parts Double 1 No. 1. CRCA Sheets/Coils 1.34 kg/kg Brake Chamber content in Type 24 L/S the export product. 2. Diaphragms Net to net. C1349 Auto Parts 1 No. 1. CRCA Sheets/Coils 1.40 kg/kg Brake Chamber content in Type 16 L/S the export product. 2. Diaphragms Net to net. C1350 Auto Parts 1 No. 1. CRCA Sheets/Coils 1.40 kg/kg Brake Chamber content in Type 20 L/S the export product. 2. Diaphragms Net to net. C1351 Auto Parts 1 No. 1. CRCA Sheets/Coils 1.39 kg/kg Brake Chamber content in Type 24 L/S the export product. 2. Diaphragms Net to net. C1352 Auto Parts 1 No. 1. CRCA Sheets/Coils 1.37 kg/kg Brake Chamber content in Type 30 L/S the export
product. 2. Diaphragms Net to net. C1353 Auto Parts 1 No. 1. CRCA Sheets/Coils 1.40 kg/kg Brake Chamber content in Type 30 S/S the export product. 2. Diaphragms Net to net. C1354 Surgical Suture 1 kg 1. Stainless Steel 1.20 kg Needles (Eye Type, Wire (AIS‐420 French Spring Eye Series) Type & Atraumatic Needles) (35mm & smaller) C1355 Auto Cables of 1 kg 1. Copper 1.01 kg/kg various size content in the export product. 2. PVC Compound 1.03 kg/kg PVC Compound content in the export product. C1356 4 Stroke Portable 1 No. 1. Gasket Case Cover 1 No. Generating Sets 2. Ring Piston Top 1 No. run on Petrol/ 3. Ring Piston 2nd 1 No. Kerosene (0.5 KVA) 4. Ring Piston Oil 1 No. 5. Conrod Assembly 1 No. 6. Shaft Complete 1 No. Comp 7. Oil Level Switch 1 No. Assembly 8. Carburettor Assy. 1 No. 9. Insulater Carbure‐ 1 No. tter 10. Magnet 1 No. 11. Bolt Flange 6 Nos. 5 * 12 CT 12. Bolt Flange 3 Nos. 5 * 14 CT 13. Bolt Flange 11 Nos. 6 * 12 CT 14. Bolt Flange 2 Nos. 6 * 16 CT 15. Bolt Stud 2 Nos. 6 * 116 CT
16. Bolt Stud 2 Nos. 6 * 28 CT 17. Bolt Flange 9 Nos. 6 * 25 CT 18. Oil Seal 2 Nos. 17 * 30 * 6 19. Pin Lock 8 MM 1 No. 20. Spark Plug 1 No. (BMR‐4A) 21. Magnet S 1 No. 22. Magnet N 1 No. 23. Diode (27A‐12KV) 2 Nos. 24. Diode Complete DC 1 No. 25. Condenser 1 No. 26. Panel Comp Contol 1 No. 27. Plug Assembly 1 No. 28. Consent (520V‐10A) 1 No. 29. Circuit Protecter 1 No. 30. Protector Circuit 1 No. 31. Cover Comp L Side 1 No. 32. Bolt Flange 7 Nos. 5*10 CT 33. Screw Tapping 1 No. 4 * 6 34. Bearing Ball 1 No. Radial 6002 35. Connector 170174‐1 1 No. 36. Connecter 41899 7 Nos. 37. Terminal Couplar 7 Nos. 38. Socket Assembly 1 No. Lamp 39. Piston 1 No. 40. One Side Zinc 1.70 kg coated steel sheet 41. Hot Dipped Alu‐ 0.49 kg uminium Coated steel sheet 42. CRNGO Silicon 5.93 kg Electrical Steel Sheet 43. Aluminium Alloy 2.20 kgs Ingots 44. Electrolytic 1.67 kg continuous cast copper rod 45. Slider Governer 1 No. 46. Valve Inlet 1 No. 47. Valve Exhaust 1 No.
48. Barrel Cylinder 1 No. 49. Cover Crank Case 1 No. 50. Glass Wool A 1 No. 51. Glass Wool B 1 No. 52. Glass Wool C 1 No. C1357 Portable I.C. 1 No. 1. Cover Crank Case 1 No. Engine of 5.5 HP 2. Head Cylinder 1 No. and 7 HP run on 3. Piston 1 No. Petrol/Kerosene 4. Pin Piston 1 No. 5. Ring Piston Top 1 No. 6. Ring Piston 2nd 1 No. 7. Ring Piston Oil 1 No. 8. Conrod Assembly 1 No. 9. Cam Shaft Assemby 1 No. 10. Timing Gear 1 No. 11. Valve Inlet 1 No. 12. Valve Exhaust 1 No. 13. Carburetter Assy. 1 No. 14. Insulater Carbure‐ 1 No. tter 15. Packing Insulater 1 No. 16. Slider Governer 1 No. 17. Tube Fuel Tank G 1 No. Assembly 18. Tube Fuel Tank K 1 No. Assembly 19. Element Air 1 No. Cleaner 20. Grid Comp Air 1 No. Cleaner 21. Case Comp Air 1 No. Cleaner 22. Cover Comp Air 1 No. Cleaner 23. Muffler Comp 1 No. 24. Stay Muffler 1 No. 25. Protecter F 1 No. Muffler 26. Protector R 1 No. Muffler 27. Protecter L 1 No. Muffler 28. Cover Comp Fan 1 No. 29. Boss Reel 1 No. 30. Bush Ratchet 1 No. 31. Coil Ign Assembly 1 No. 32. Terminal Assembly 1 No. Ht 33. Magnet 1 No.
34. SW Assembly 1 No. Engine Stop 35. Bolt Flange 3 Nos. 6 * 16 CT 36. Bolt Flange 8 Nos. 6 * 12 CT 37. Bolt Flange 2 Nos. 6 * 14 CT 38. Bolt Flange 2 Nos. 6 * 32 CT 39. Bolt Flange 2 Nos. 5 * 10 CT 40. Bolt Stud 2 Nos. 8 * 35 CT 41. Screw Washer 1 No. 5 * 12 42. Screw Tapping 7 Nos. 4 * 8 43. Wassher Lock 7 MM 2 Nos. 44. Pin Lock 10 MM 1 No. 45. Clip Piston 16 MM 2 Nos. 46. Bearing Ball 1 No. Radial 47. Spark Plug 1 No. 48. Barrel Comp 1 No. Cylinder 49. Zinc Coated Steel 1.28 kg Sheets C1358 Split Aircondi‐ 1 No. 1. Compressor Herma‐ | tioner 12000 BTU tically Sealed | consisting of compressors/Reci‐ | 1 Condenser procating Type/ | 1 Evaporator Rotary Type/Scroll| Type Suitable for | Electrical supply | of 110V or 120V | or supply of 200V | or 240V +/‐ 10% |Net to net. Toleraance limit &| of 50 or 60 cycles| capacity range: | 12000 BTU +/‐ 10% | Tolerance limit | 2. Bearing Assembly | 3. Air Filter | 4. Propeller (Fan) | Condenser Fan | 5. Capacitors(36 MFD.|
440V) | 6. Copper Tube Plan 1.02 kg/kg or Grooved 7.0mm content in O.D. to 9.52mm the export O.D. product. 7. Steel Sheets (GP 1.10 kg/kg and CRCA) content in Steel Sheet ‐ GP‐ the export CRCA (0.6mm to product. 2.0mm +/‐ 8% thi‐ ckness variation) ******* Annexure "E" to Public Notice No. 18 Dated: 22.6.98 PLASTIC PRODUCTS Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) H383 Multi Layer 1 kg 1. LDPE Granules 1.05 kg/kg (3 layer) Co‐ (Film Grade) content in extruded plastic the export packaging material product. for liquid 2. LLDPE Granules 1.05 kg/kg (Printed/ (Film Grade) content in Unprinted) the export product. 3. Polybatch (Slip/ 0.01 kg Anti block) 4. Colour Master 0.01 kg Batch Note: In case of export of clear transparent multi‐layer co‐extruded plastic film, the colour master batch at item No.4 is not allowed for import. H384 Gents Insole 1 No. 1. Cellulose Insole 0.05 Sq.Mtr. Sheet 2. Shank Board 0.029 Sq.Mtr. H385 Ladies Insole 1 No. 1. Cellulose Insole 0.04 Sq.Mtr. Sheet 2. Shank Board 0.023 Sq.Mtr. H386 Children Insole 1 No. 1. Cellulose Insole 0.03 Sq.Mtr.
Sheet 2. Shank Board 0.017 Sq.Mtr. ******* Annexure "F" to Public Notice No. 18 Dated: 22.6.98 MISCELLANEOUS PRODUCTS Sl. Export Item Import Item No. Name Qty. Name Qty. (1) (2) (3) (4) (5) K112 Hinge Lid Packets/ 1 kg 1. Relevant Paper 1.10 kg Coated Board Outer Board 2. Printing Ink and Upto 3% of Varnishes FOB value of export. *END
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.