{(To be published in the Gazette of India Extraordinary Part II Section-3, Sub-Section (ii)} Government of India Ministry of Commerce & Industry Department of Commerce Directorate General of Foreign Trade Udyog Bhavan Notification No. | 0 /2015-2020 New Delhi, dated: 11" june, 2020

Subject: SCOMET Updates 2020 - Amendment in Appendix 3 (SCOMET items) to Schedule-

2 of ITC (HS) Classification of Export and Import Items, 2018. S.0.(E) ॥ exercise of the powers conferred by Section 5 and Section 14A of the Foreign Trade (Development and Regulation) Act, 1992, as amended, read with Para 1.02 of the Foreign Trade Policy 2015-2020, the Central Government hereby makes the amendment in Appendix 3 (SCOMET Items) to Schedule -2 of ITC (HS) Classification of Export and Import Items 2018, as enclosed in the Annexure to this Notification. 2. The updated Appendix 3 (SCOMET Items) to Schedule- 2 of ITC (HS) Classification of Export and Import Items, 2018 including annexure to this notification would be uploaded on the web-portal of DGFT under heading Policies and Sub-heading SCOMET (http://dgft.gov.in/scomet). ‘Be In order to provide transition time to industry, this Notification shall come into force after 30 days of the issue. However, changes to the Annex on Scheduled Chemicals, as at Sl. No. 63 to 66 of the Annexure to the Notification, shall come into force, with immediate effect. 4. Effect of this Notification:- Annual SCOMET Updates - 2020 has been notified to amend Appendix 3 (SCOMET Items) to Schedule - 2 of ITC (HS) Classification of Export and Import Items, 2018. eS) U\o (Amit Wee 23० Director General of Foreign Trade Ex-officio Additional Secretary to the Government of India E-mail: dgft@nic.in (Issued from F.No. 01/91/171/37/AM10/EC / E-65) Note : Principal Notification No. 05 dated 24th April 2017, Notification No. 13 dated 28th June 2017, Notification No. 29 dated 21% September 2017, Notification No. 17 dated gre July, 2018 and Notification No. 04 dated 24" April, 2019

Annexure Annexure referred to in DGFT Notification No.10/2015-20 dated11.06.2020 regarding amendment in Appendix 3 (SCOMET Items) to Schedule -2 of ITC (HS) Classification of Export and Import Items 2018 S.No. | Entry No. in Existing entry in SCOMET List Revised Entry in SCOMET List SCOMET [The previous entries against relevant items shall Control List be substituted as under in the SCOMET list:] Text highlighted in purple color has been added is Or a 8 3 EEE —E—E——E————— Eas Ee hange in 1 AExport of the following chemicals is prohibited: 1A Export of the following chemicals, related he heading technology and software is prohibited : of 1A hemicals 2. {Change in 3D0013D001 (6)Valves 3D001(6)Valves 6) Valves (i) Valves, having both of the following: (i) Valves, having both of the following: Addition of ‘echnical a, A nominal size greater than 1.0 cm (3/8"), and a. A nominal size greater than DN 10 or NPS 3/8 or ote 3 at the b. All surfaces that come in direct contact with the national equivalents, and end of 3D001 chemical(s) being produced, processed, or contained |b. All surfaces that come in direct contact with the (6) Valves are made from the materials of construction in chemical(s) being produced, processed, or Technical Note | of this entry (ii) Valves, not already identified in 3D001(6)(i), having all of the following: a. A nominal size equal to or greater than 2.54 cm (1") and equal to or less than 10.16 cm (4") Casings (valve bodies) or preformed casing liners, A closure element designed to be interchangeable, and All surfaces of the casing (valve body) or preformed case liner that come in direct contact with the chemical(s) being produced, processed, or contained are made from the materials of construction in Technical Note | of this entry (iii) Components, as follows: a. Casings (valve bodies) designed for valves in paragraphs 6.a.or 6.b., in which all surfaces that come in direct contact with the chemical(s) being produced, processed, or contained are made from the materials of construction in Technical Note 1 of this entry; Preformed casing liners designed for valves in paragraphs 6.a.or 6.b., in which all surfaces that come in direct contact with the chemical(s) being produced, processed, or contained are made from the materials of construction in Technical Note 1 of this entry. Technical Note 1. Materials of construction for valves include any of the following: nickel or alloys with more than 40% nickel by weight; alloys with more than 25% nickel and 20% chromium by weight: fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight); glass or glass-lined (including vitrified or enamelled coating); tantalum or tantalum alloys; contained are made from the materials of construction in Technical Note | of this entry (ii) Valves, not already identified in 3D001(6)(i), having all of the following: a. A nominal size equal to or greater than DN 25 or NPS | and equal to or less than DN 100 or NPS 4 or national equivalents. b. Casings (valve bodies) or preformed casing liners, ec. A closure element designed to be interchangeable, and d. All surfaces of the casing (valve body) or preformed case liner that come in direct contact with the chemical(s) being produced, processed, or contained are made from the materials of construction in Technical Note | of this entry iii) Components, as follows: a.Casings (valve bodies) designed for valves in paragraphs 6.a.or 6.b., in which all surfaces that come in direct contact with the chemical(s) being produced, processed, or contained are made from the materials of construction in Technical Note 1 of this entry; b.Preformed casing liners designed for valves in paragraphs 6.a.or 6.b., in which all surfaces that come in direct contact with the chemical(s) being produced, processed, or contained are made froti the materials of construction in Technical Note 1 of this entry. Technical Note 1. Materials of construction for valves include any of the following: a. _ nickel or alloys with more than 40% nickel by weight; 6. alloys with more than 25% nickel and 20% chromium by weight; c. fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight); d. glass or glass-lined (including vitrified or enamelled coating); Page | of 26 py

rm 0० rh ‘echnical Note 2. smaller of the inlet and outlet port diameters. titanium or titanium alloys; zirconium or zirconium alloys; niobium (columbium) or niobium alloys; or ceramic materials as follows: | silicon carbide with a purity of 80% or more by weight: 2.aluminum oxide (alumina) with a purity of 99.9% or more by weight; 3.zirconium oxide (zirconia). The ‘nominal size' is defined as the m OQ HK Technical Note 2. maller of the inlet and outlet port diameters. tantalum or tantalum alloys; titanium or titanium alloys; zirconium or zirconium alloys; niobium (columbium) or niobium alloys; or ceramic materials as follows: 1.silicon carbide with a purity of 80% or more by weight; 2.aluminum oxide (alumina) with a purity of 99.9% or more by weight; 3.zirconium oxide (zirconia). The ‘nominal size’ is defined as the Technical Note 3.Metric nominal sizes (DN) of valves are’ in accordance with ISO6708: 1995. National Pipe Sizes (NPS) are in accordance with ASME B36.10 or B36.19, or national equivalents. a Change — in |1A(6) Nitrogen mustard HN2: Bis (2-chloroethyl) 1A(6)Nitrogen mustard HN2: Bis (2-chloroethyl) 1A (6) loroarsine IMethylamine | hange in 30006 Fermenters: D006Fermenters: D006 \Fermenters: (1) Fermenters capable of cultivation of micro- (1) Fermenters capable of cultivation of micro- organisms or of live cells for the production of organisms or of live cells for the production of Addition of viruses or toxins, without the propagation of viruses or toxins, without the propagation of echnical Note ॥ and 2 (2) aerosols, having a total internal volume of 20 litres or greater; Components designed for such fermenters, as follows:~ a. Cultivation chambers designed sterilized or disinfected in situ; b. cultivation chamber holding devices; or c. process control units capable of simultaneously monitoring and controlling two or more fermentation system parameters (e.g. temperature, pH, nutrients, agitation, dissolved oxygen, air flow, foam control). to be (2) aerosols, having a total internal volume of 20 litres or greater; Components designed for such fermenters, as follows:- a, Cultivation chambers designed to be sterilized or disinfected in situ; . cultivation chamber holding devices; or c. process control units capable of simultaneously monitoring and controlling two or more fermentation system parameters (e.g. temperature, pH, nutrients, agitation, dissolved oxygen, air Technical Note ystems. ‘ermenters include bioreactors (including single-use (disposable) bioreactors), chemostats and continuous-flow flow, foam control). Technical Note 1 Fermenters include bioreactors (including single-use (disposable) bioreactors), chemostats and continuous-flow systems, Technical Note 2 Cultivation chamber holding devices include single-use cultivation chambers with rigid walls, INew Entries jadded at 1D026 to 1D049 |New entries entered D049 from sub-category 1D026 to SLN | SCOME||Chemical ‘AS Number ०. [1 Ent! | 1| | 10001 | 10001 || 2-Chloroethanol (107-07-3 3-Hydroxy-1- 2 || 1D002 || methylpiperidine 3554-74-3 3 || 10003 || 3-Quinuclidone (3731-38-2 Ammonium 4 || 1D004 || bifluoride (1341-49-7, 5 | 10005 | 19005 || Diethylaminoethanol| (100-37-8 | «| 1D006 || Diisopropylamine 108-18-9 7 || 1D007 || Dimethylamine (124-40-3 Dimethylamine | | 1D008 || hydrochloride 506-59-2 | 9| 1D009 || Hydrogen fluoride (7664-39-3 | 10] 1D010 || Methyl benzilate 76-89-1) O0,0-Diethyl Fi 1 late | 1_|| phosphorothioate 2465-65-8 Page 2 of 26 py

0,0-Diethy| 12|| 1D012 || phosphorodithioate | (298-06-6 13 || 1D013 || Pinacolone 75-97-8 Phosphorus 14 || 10014 || pentasulphide 1314-80-3 15 | 1DO15_ || Potassium bifluoride |(7789-23-3 | 16] | 10016 | Potassium cyanide 151-50-8) 17|| 1D017 || Potassium fluoride 7789-23-3 | 18] 1D018 || Sodium bifluoride 1333-83-1 | 19] | 10019 | 19019 || Sodium cyanide 143-33-9) | 20| 1D020 | Sodium fluoride 7681-49-4 Sodium 21 | 1D021 || hexafluorosilicate 16893-85-9 22| 1D022 || Sodium sulphide 1313-82-2) Triethanolamine 23 | 1D023 | hydrochloride 637-39-8 Triisopropyl 24 | 1D024 || phosphate 116-17-6 25 || 1D025 || Diethylamine (109-89-7 Methyl 677-24-7 26 || 1D026 || dichlorophosphate Ethyl 1498-51-7 27|| 1D027 || dichlorophosphate Methyl 22382-13-4 28 | 1D028 || difluorophosphate | Ethyl 460-52-6 29|| 1D029 || difluorophosphate Diethyl 589-57-1 30 || 1D030 || chlorophosphite Methyl 754-01-8 31]| 1D031|| chlorofluorophosphate Ethyl 762-17-6 32| 110032 | chlorofluorophosphate N,N- 44205-42-7 33]| 1D033_|| Dimethylformamidine N,N- 90324-67-7 34|| 1D034 || Diethylformamidine N,N- 48044-20-8 35|| 10035 ॥ Dipropylformamidine N,N- 857522-08-8 Diisopropylformamidin 36 | 1D036 ॥ e NN- 2909-14-0 37 || 1D037_ || Dimethylacetamidine} N,N- 14277-06-6 38 || 10038 || Diethylacetamidine N,N- 1339586-99-0 39॥ 10039 || Dipropylacetamidine N.N- 56776-14-8 Dimethylpropanamid| 40 | 1D040 || ine N,N- 84764-73-8 Diethylpropanamidin i 10041 || € N,N- 1341496-89-6 Diprophypropanamid| 42|| 1D042 || ine N,N- 1340437-35-5 Dimethylbutanamidi 43 || 1D043 || ne N,N- 53510-30-8 44|| 1D044 || Diethylbutanamidine N,N- 1342422-35-8 Diprophylbutanamidi| 45 | 1D045 || ne | 46 11046 || NN 1315467-17-4 Page 3 of 26 |

Diisopropylbutanami 7] dine N.N- 321881-25-8 Dimethylisobutanam 47 | 1D047 || idine N,N- 1342789-47-2 Diethylisobutanamid rE 1D048 || ine N,N- 13422700-45-1 Dipropylisobutanami 49 || 1D049 || dine Sub 2DViruses, whether natural, enhanced or modified, either in 2D Viruses, whether natural, enhanced or modified, either Category 2D {the form of isolated live cultures or as material including _ jin the form of isolated live cultures or as material (Addition of [living material which has been deliberately inoculated or _ including living material which has been deliberately Middle East contaminated with such cultures, related technology and inoculated or contaminated with such cultures, related respiratory software: fechnology and software: syndrome Se 2D001 African Horse Sickness virus 2D001 African Horse Sickness virus hoe at si, | 20002 African Swine Fever virus No. 20031 | 20003 Avian influenza virus 2D002 African Swine Fever virus and change 2D003 Avian influenza virus in_order_of rder_of Note This includes only those Avian influe Note This includes only those Avil items viruses of high pathogenicity as defined by influenza viruses of high pathogenicity (Sequence World Organization for Animal Health (01, defined by the World Organization maintained the European Union (EU), or compet Animal Health (OIE), the European Uni in national regulatory bodies. (EU), or competent national regulatd alphabetical bodies. order as | 2D004 Blue tongue virus 2D004 Blue tongue virus international ८ मु ८ ५ practice) 2D005 ‘amel pox virus 2D005 ‘amel pox virus 2D006 Chikungunya virus 2D006 Chikungunya virus 2D007 Crimean-Congo hemorrhagic fever virus 2D007 Crimean-Congo hemorrhagic fever virus 2D008 Dengue virus 2D008 Dengue virus 2D009 Eastern equine encephalitis virus 2D009 Eastern equine encephalitis virus 20010 Ebolavirus: all members of the Ebolavit 20010 Ebolavirus: all members of the Ebolavi genus genus 2D011 Encephalomyocarditis virus (EMC) 2D011 Encephalomyocarditis virus (EMC) 2D012 Foot and Mouth Disease virus (all serotyy} 21012 Foot and Mouth Disease virus (all serotyp and subtypes) and subtypes) Ree ‘YP! 2D013 Guanarito virus 2D013 Guanarito virus 2D014 Goatpox virus 20014 Goatpox virus 2D015 Hantaan virus 2D015 Hantaan virus 2D016 Herpes virus simiae (monkey B virus) 2D016 Herpes virus simiae (monkey B virus) 2D017 Herpes ateles, Herpes saimiri 2D017 Herpes ateles, Herpes saimiri 2D018 HIV- | & HIV-2 and other strains of SIV 2D018 HIV- 1 & HIV-2 and other strains of SIV 2D019 Classical swine fever virus (Hog cholera viru) 2D019 Classical swine fever virus (Hog chold a ack virus) टोल Homan: T-cell Lenkentiavirus 2D020 Human T-cell Leukemia virus 2D021 Junin virus 29021 Tanta eng 2D022 Japanese encephalitis virus 20022 Japanese encephalitis virus 2D023 Kyasanur Forest Disease virus 2D023 Kyasanur Forest Disease virus 2D024 Korean hemorrhagic fever virus 2D024 Korean hemorrhagic fever virus 20025 Lymphocytic choriomeningitis virus (LCM) | 21025 Lymphocytic choriomeningitis virus (LC 2D026 Lassa virus 2D026 Lassa virus 2D027 Marburgvirus: all members of the Marburgvill 2D027 Marburgvirus: all members of the genus Marburgvirus genus 2D028 Murray valley encephalitis virus 2D028 Murray valley encephalitis virus 2D029 Machupo virus 2D029 Machupo virus 2D030 Mason-pfizer monkey virus 2D030 Mason-pfizer monkey virus + 2D031 Middle East respiratory syndrome Page 4 of 26 a

2D031 2D032 2D033 2D034 2D035 2D036 2D037 2D038 2D039 2D040 2D041 2D042 2D043 2D044 2D045 2D046 2D047 2D048 2D049 2D050 2D051 2D052 2D053 2D054 2D055 2D056 2D057 2D058 2D059 2D060 2D061 2D062 2D063 2D064 2D065 2D066 2D067 2D068 2D069 2D070 2D071 Monkey pox virus Newcastle disease virus Omsk hemorrhagic fever virus Peste des petits ruminant virus Teschen disease virus (Porcine entero virus type 1) Powassan virus Rabies virus and other members of the Lyssavirus genus Respiratory syncitial virus Rift Valley Fever virus Rinderpest virus Sabia virus Sheeppox virus Sin Nombre virus Smallpox virus St.Louisencephalitis virus Swine vesicular disease virus Tick-borne encephalitis virus (Far Eastern subtype) (Reserved) Variola virus Venezuelan equine encephalitis virus Vesicular stomatitis virus Western equine encephalitis virus Yellow fever virus Andes virus Chapare virus Choclo virus Dobrava-Belgrade virus Suidherpesvirus 1 (Pseudorabies virus; Aujeszky's disease) Hendra virus (Equine morbillivirus) Laguna Negra virus Louping ill virus Lujo virus Lumpy skin disease virus (Reserved) Nipah virus Oropouche virus (Reserved) Rocio virus Seoul virus Severe acute respiratory syndrome-related coronavirus (SARS-related coronavirus) Reconstructed 1918 influenza virus 2D032 2D033 2D034 2D035 2D036 2D037 2D038 2D039 2D040 2D041 2D042 2D043 2D044 2D045 2D046 2D047 2D048 2D049 2D050 2D051 2D052 2D053 2D054 2D055 2D056 2D057 2D058 2D059 2D060 2D061 2D062 2D063 2D064 2D065 2D066 2D067 2D068 2D069 2D070 2D071 2D072 coronavirus (MERS-CoV) Monkey pox virus Newcastle disease virus Omsk hemorrhagic fever virus Peste des petits ruminant virus Teschen disease virus (Porcine entero viru: type 1) Powassan virus Rabies virus and other members of the Lyssavirus genus Respiratory syncitial virus Rift Valley Fever virus Rinderpest virus Sabia virus Sheeppox virus Sin Nombre virus Smallpox virus St.Louisencephalitis virus Swine vesicular disease virus Tick-borne encephalitis virus (Far Eastern subtype) (Reserved) Variola virus Venezuelan equine encephalitis virus Vesicular stomatitis virus Western equine encephalitis virus Yellow fever virus Andes virus Chapare virus Choclo virus Dobrava-Belgrade virus Suidherpesvirus 1 (Pseudorabies virus; Aujeszky's disease) Hendra virus (Equine morbillivirus) Laguna Negra virus Louping ill virus Lujo virus Lumpy skin disease virus (Reserved) Nipah virus Oropouche virus (Reserved) Rocio virus Seoul virus Severe acute respiratory syndrome-related coronavirus (SARS-related coronavirus) Reconstructed 1918 influenza virus Page 5 of 26 as

S.No. | Entry No. in SCOMET Control List Existing entry in SCOMET List (as notified vide Noti No. 03 dated 24.04.2020) Revised Entry in SCOMET List [The previous entries against relevant items shall be substituted as under in the SCOMET list:] Peta 3 Addition of para ‘ontrol text to ring clarity in | ७, cope of control inder SCOMET) ¢. at. 5A102 ki h. nd alignment in} a. (Category 54102 54102 Subsystems and components usable in missiles and rocketsincluding: rocket motor cases, interior lining, insulation andnozzles; rocket staging mechanisms, separation mechanisms andinter-stages; Liquid, slurry and gel propellant (including oxidisers) control systems, and specially designedcomponents therefor, usable in missiles and rockets, designed or modified to operate in vibration environments greater than specified in 5A102.c are the following: Servo valves designed for flow rates equal to or greater than 24 litres per minute, atan absolute pressure equal to or greater than 7 MPa, that have an actuator response time of less than 100ms. Pumps, for liquid propellants, with shaft speeds equal to or greater than 8,000 rpmat the maximum operating mode or with discharge pressures equal to or greater than 7 MPa Gas turbines, for liquid _ propellant turbopumps, with shaft speeds equal to or greater than 8,000 rpm at the maximum operating mode. Heat-shields and components __ thereof, fabricated of ceramic orablative materials; methods of achieving thrust vector control such as flexible nozzle. fluid or secondary gas injection, movable engine or nozzle, deflection of exhaust gas stream (jet vanes or probes) and use of thrust tabs; hybrid rocket motors and components thereof; safing, arming, fusing and firing mechanisms for 54102 Subsystems and components usable in missiles and rocketsincluding: a. rocket motor cases, interior lining, insulation andnozzles; b. rocket staging mechanisms, mechanisms andinter-stages; . Liquid, slurry and gel propellant (including oxidisers) control systems, and specially designedcomponents therefor, usable in missiles and rockets, designed or modified to operate in vibration environments greater than separation 10 g rms between 20 Hz and 2 kHz. 10 grms between 20 Hz and 2 kHz. otes Notes 1. The only servo valves, pumps and gas turbines

1. The only servo valves, pumps and gas turbines specified in 5A102.c are the Sollowing: a. Servo valves designed for flow rates equal to or greater than 24 litres per minute, atan absolute pressure equal to or greater than 7 MPa, that have an actuator response time of less than 100ms. b. Pumps, for liquid propellants, with shaft speeds equal to or greater than 8,000 rpmat the maximum operating mode or with discharge pressures equal to or greater than 7 MPa c. Gas turbines, for liquid propellant turbopumps, with shaft speeds

Systems and components specified in this equal to or greater than 8,000 rpm clause may be exported as part ofa satellite; at the maximum operating mode. 2. Systems and components specified in this clause may be exported as part of d. re-entry vehicles and equipmentincluding a satellite; d. re-entry vehicles and equipmentincluding 1. Heat-shields and components _ thereof, 2. Heat sinks and components thereof, fabricated fabricated of ceramic orablative materials; of light weight, high heat capacity materials; 2. Heat sinks and components thereof, 3. Electronic equipment specially designed for fabricated Us light weight, high heat re-entryvehicles. capacitymaterials; है ४ 3. Electronic equipment specially designed for re-entryvehicles. e. guidance systems and te COMERS such as e. guidance systems and their components such as gyros and inertial referenceunits; gyros and inertial referenceunits; f, thrust-vector control. subsystems including f. thrust-vector control subsystems including methods of achieving thrust vector control such as flexible nozzle, fluid or secondary gas injection, movable engine or nozzle, deflection of exhaust gas stream (jet vanes or probes) and use of thrust tabs; g.hybrid rocket motors and components thereof: lh.safing, arming, fusing and firing mechanisms for weapons orwarhead. Page 6 of 26 Text highlighted in purple color has been added 4

weapons orwarhead, software specially designed for reduced software specially designed for reduced observables such as radar reflectivity, observables such as radar reflectivity, ultraviolet/infrared signatures and ultraviolet/infrared signatures and acousticsignatures. acousticsignatures. j. Combustion chambers and nozzles for j. Combustion chambers and nozzles for liquid liquid propellant rocket engines or gel propellant rocket engines or gel propellant propellant rocket motors rocket motors 45 INew entry addedNew entry added at 5A102(k) and (I) 5A102 था 5A102 (k) and k. Turbojet and turbofan engines (including turbo 1) compound engines).

1. “Ramjet, Scramjet, pulse jet, combined cycle engincs, including devices to regulate combustion, and specially designed components.” é Change in 5B.e. 5B Unmanned aerial vehicles including cruise 58 Unmanned aerial vehicles including cruise missiles, target dronesandreconnaissance drones and issiles, target dronesandreconnaissance drones and ‘elated equipment, and specially designed related equipment, and specially designed icomponentstherefor: omponentstherefor: e. Light weightTurbojet / turbofan engines (including turbo
2. Light weightTurbojet and turbofan engines (including compound engines). urbo compound engines), x [Entry under 5B.f 5B SB amended. if. Ramjet / Scramjet / pulse jet/ combined cycle f “Ramjet, scramjet, pulse jet, detonation, o engines, including devices to regulate combustion, ‘combined cycle’ engines, including devices to regulate) and specially designedcomponents combustion, and specially designed components.” : hange in 5A2035A203 Test benches/stands, usable for complete rocket | 5A203Test benches or test stands.usable forcomplete| systems and subsystems (including ballistic missile | rocket systems and subsystems (including ballistic systems, space launch vehicles and sounding rockets) | missile systems, space launch vehicles and sounding] hich have the capacity to handle solid or liquid propellant | rockets) which have the capacity to handle solid ot rockets, motors or engines, or which are capable of | liquid propellant rockets, motors or engines, or whic! simultaneously measuring the three axial | are capable of simultaneously measuring the three axial hrustcomponents. thrustcomponents. S.No. | Entry No. in Existing entry in SCOMET List Revised Entry in SCOMET List SCOMET (as notified vide Noti No. 03 dated 24.04.2020) [The previous entries against relevant items shall Control List be substituted as under in the SCOMET list:] Text highlighted in purple color has been added | 7 | ne ae 3 Seer Sea

|Change in 0B002/0B002.d.Tritium facilities or plants for the production,0B002 .d. recovery, extraction, concentration or handling of triti jand equipment therefor including hydrogen or heli refrigeration units; and hydrogen isotope storage ० purification systems using metal hydrides as the storage o purification medium. ritium facilities or plants, and equipment therefor, as follows:

1. Facilities or plants for recovery, extraction, handling oftritium; Equipment for tritium facilities or plants. asfollows: i. Hydrogen or helium refrigeration units capable of cooling to 23 K (-250 °C) o less, with heat removalcapacity greate: than 150 W; Hydrogen isotope storage or hydroge isotope purification systems using metal hydrides as the storage oo purificationmedium. the production concentration ०
2. A302 iEntry 0A302.b deleted and Note 2 added 0A.302 Nuclear grade graphite Nuclear grade graphite having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/ce - 0A302 Nuclear grade graphite |Nuclear grade graphite having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc,for use in a nuclear reactor or any other nuclear activities in quantities a. for use in a nuclear reactor or any other nuclear activities in quantities exceeding 1 kilogram: b. for use in non-nuclear activities in quantities exceeding | kilogram. Page 7 of 26 bw

exceeding 30 metric tons for any one recipient country within a period of one calendar year. Note The item 04302 does not cover graphite powder. ote _\The item 04302 does not cover graphite powder. ote 2 |For the purpose of export control, the Government wil! determine whether or not the exports of graphite meeting ie above specifications are for nuclear reactor use. aphite having a purity level better than 5 ppm (parts per million) boron equivalent and with a density greate an 1.50 g/cm3 not for use in a nuclear reactor or am other nuclear activities is not covered by this paragraph. [Boron Equivalent (BE) may be _ determined experimentally or is calculated as the sum of BEz fo impurities (excluding BEcarbon since carbon is ot! onsidered an impurity) including boron, where: BEq ppm = CF x concentration of element Z (in ppm); 3 Az):0z x AB) divided by (oCF is the conversion factor: (| z are the thermal neutron capture cross sections (in barns’ ‘or naturallyoB and o occurring boron and element Z| respectively; and AB and Az are the atomic masses of naturally occurring boron and element Z respectively | hange in Entry at 08003 0B003 equipment, components and systems especially designed] prepared or adapted or used or intended to be used in suc plants, including but not limited to: a. Irradiated fuel element chopping machine designed for remote operation b. _ Dissolvers capable of withstanding hot and highl corrosive liquid for dissolution of irradiated nuclear fuel and which can be remotely loaded and maintain c. Solvent extractors and solvent — extractioi equipment resistant to the corrosive effect of nitric acid d. | Chemical holding or storage vessels resistant 10 the corrosive effect of nitric acid Plants for reprocessing of irradiated nuclear fuel andlPlants for reprocessing of irradiated nuclear fuel and 0B003 equipment, components and systems especially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to: a. Irradiated fuel element decladding equipment and chopping machines: Remotely operated equipment especially designed or prepared for use in a reprocessing plant as identified above andj intended to expose or prepare the irradiated nuclear material in fuel assemblies, bundles o1 rods for processing. b. Dissolvers: Dissolver vessels or dissolve employing mechanical devices especially designed or prepared for use in a reprocessing plant a identified above, intended for dissolution of irradiated nuclear fuel and which are capable off withstanding hot, highly corrosive liquid, and which] can be remotely loaded, operated, and maintained. €. Solvent extractors and solvent extraction! equipment: Especially designed or prepared solvent extractors (such as packed or pulse columns, mixer settlers or centrifugal contactors) for use in a plant for the reprocessing of irradiated fuel. Solvent extractors must be resistant to the corrosive effect of nitric acid. Solvent extractors are normall: fabricated to extremely high standards speci welding and inspection and quality assurance an quality control techniques) out of low carbo: stainless steels, titanium, zirconium, or other hi: quality materials, d. Chemical holding or storage vessels: Especiall designed or prepared holding or storage vessels fo use in a plant for the reprocessing of irradiated fuel The holding or storage vessels must be resistant t the corrosive effect of nitric acid. The holding ० storage vessels are normally fabricated of material: such as low carbon stainless steels, titanium o: zirconium, or other high quality materials. Holdin; or storage vessels may be designed for remot operation and maintenance and may have th following features for control of nuclear criticality: Page 8 of 26 uy

c reprocessing of irradiated fuel elements. f. components as follows: shielding windows handling high explosives: and control units therefor Neutron measurement systems for integration and use with automated process control systems for the Industrial equipment including assemblies and

1. High density (lead glass or other) radiation
2. Radiation hardened TV cameras, or lenses therefo:
3. ‘Robots’ or ‘end effectors’ especially designed fos
4. Remote manipulators that can be used to provide}

Walls or internal structures with a boro equivalent of at least 2%; 2. A maximum diameter of 175 mm for cylindrica vessels; or 3. A maximum width of 75 mm for either a slab ० annular vessel. e. Neutron measurement systems for process control Neutron measurement systems especiall designed or prepared for integration and use wii automated process control systems in a plant for the reprocessing of irradiated fuel elements. $ (Deleted) remote actions in radiochemical separatior operations or hot cells 15. }0A301(b) 04301 A301 [Entry (b) deleted|Deuterium and heavy water euterium and heavy water Deuterium, heavy water (deuterium oxide) and any other euterium, heavy water (deuterium oxide) and any other deuterium compound, in which the ratio of deuterium to leuterium compound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, drogen atoms exceeds 1:5000,for use in a nuclear a. for use in a nuclear reactor in quantities exceeding reactor in quantities exceeding 5 kilograms of deuterium 5 kilograms of deuterium atoms in one consignment or 25atoms in one consignment or 25 kilograms of deuterium kilograms of deuterium atoms, for any one recipient toms, for any one recipient country within a period of country within a period of one calendar year; one calendar year; b. for use in a non-nuclear activity in quantities exceeding} 200 kilograms of deuterium atoms, for any one recipient country within a period of one calendar year. S.No. | Entry No. in Existing entry in SCOMET List Revised Entry in SCOMET List SCOMET (as notified vide Noti No. 03 dated 24.04.2020) [The previous entries against relevant items shall Control List be substituted as under in the SCOMET list:] Text highlighted in purple color has been added ek ees eet. | 3 eee ee | New Note 5 '8A102 "Composite" structures or laminates, as follows: |8A102 "Composite" structures or laminates, as 100९0 to clarify ja. Made from any of the following: ots: pple of 1. An organic "matrix" and "fibrous or filamentary . Made from any of the following: ;A102.b.1 materials" specified by 8C110.c, 8C110.dor

1. An organic "matrix" and "fibrous or filamentary
2. Prepregs or preforms specified by 8C110.e; b. Made from a metal or carbon "matrix", and any of the following:
3. Carbon "fibrous or filamentary materials" having all of 1 following: a. A "specific modulus" exceeding 10.15 x 10° m; and
4. A "specific tensile strength" exceeding 17.7 x 104 m; or
5. Materials specified by 8C110.c. vote 1 8A] 02 does not apply to "composite" structures or laminates, made from epoxy resin impregnated carbon "fibrous or filamentary materials", for the repair of "civil aircraft" structures or laminates, having all of the following: a. An area not exceeding 1 m2; b. A length not exceeding 2.5 m; and . A width exceeding 15 mm. ‘ote 8A102 does not apply to semi-finished items, specially designed for purely civilian applications as follows: a. Sporting goods; b. Automotive industry; . Machine tool industry; d. Medical applications. materials" specified by 8C110.c, 8C110.dor
6. Prepregs or preforms specified by 8C110.e; b. Made from a metal or carbon "matrix", and any of the following:
7. Carbon "fibrous or filamentary materials" having all of the following: a. A "specific modulus" exceeding 10.15 x 10° m; and
8. A "specific tensile strength" exceeding 17.7 x 104 m; or
9. Materials specified by 8C110.c. fote 1 8A102 does not apply to "composite" tructures or laminates, made from epoxy resin impregnated carbon "fibrous or filamentary materials", for the repair of "civil aircraft" structures or laminates, aving all of the following: a. An area not exceeding | m2; b. A length not exceeding 2.5 m; and . A width exceeding 15 mm. ote 2 8A102 does not apply to semi-finished items, specially designed for purely civilian applications as a. Sporting goods; b. Automotive industry; follows: Page 9 of 26 So

ote 3 8A102.b.1. does not apply to semi-finished items ‘ontaining a maximum of two dimensions of interwoven filaments and specially designed for applications as follows: a. Metal heat-treatment furnaces for tempering metals; b. Silicon boule production equipment. lote 4 64102 does not apply to finished items specially designed for a specific application . Machine tool industry; d. Medical applications. ote 3 8A102.b.1. does not apply to semi-finished items containing a maximum of two dimensions of interwoven filaments and specially designed for applications as follows: a. Metal heat-treatment furnaces for tempering metals; b. Silicon boule production equipment. lote 4. 8A 102 does not apply to finished items specially designed for a specific application. Note 5 8A102.b.1. does not apply to mechanically hopped, milled, or cut carbon "fibrous or filamentary materials” 25.0 mm or less in length. 17. {Change in entry 8A105 Body armour and components therefor, as follows:8A105 Body armour and components therefor, as lagainst 8A105.b. follows: la.Soft body armour not manufactured to military standards _a.Soft body armour not manufactured to military or specifications, or to their equivalents, and specially standards or specifications, or to their equivalents, and designed components therefor: specially designed components therefor; b. Hard body armour plates providing ballistic protection _[b.Hard body armour plates providing ballistic protection equal to or less than level 114 (NIJ 0101.06, July 2008) equal to or less than level IILA (NIJ 0101.06, July 2008), or "equivalent standards". :B.1. For "fibrous or filamentary materials" used in the \N.B.1. For "fibrous or filamentary materials" used in janufacture of body armour, see 8C110. the manufacture of body armour, see 8C110. .B.2. For body armour manufactured to military N.B.2. For body armour manufactured to military tandards or specifications, see 6A013.d. tandards or specifications, see 6A013.d. ote 1 8A105 does not apply to body armour when Note 1 64105 does not apply to body armour when accompanying its user for the user's own personal accompanying its user for the user's own personal protection. protection. 22९2... 84165 does not apply to body armour designed to \Note 2. 84105 does not apply to body armour designed provide frontal protection only from both fragment and blastto provide frontal protection only from both fragment and ‘om non-military explosive devices. blast from non-military explosive devices. ote 3 84105 does not apply to body armour designed to \Note 3... 84105 does not apply to body armour designed provide protection only from knife, spike, needle or blunt _|to provide protection only from knife, spike, needle or rrauma. blunt trauma. Slight 8A106Equipment, specially designed or modified for the 8A106 Equipment, specially designed or modified for mendment in disposal of improvised explosive devices, as follows, and & disposal of Improvised Explosive Devices (IEDs), as he entry 8A106 [specially designed components and accessories therefor: follows, and specially designed components and a. Remotely operated vehicles: ecessories therefor: 0. 'Disruptors'; . Remotely operated vehicles; 0. ‘Disruptors'; Technical Note Technical Note ‘Disruptors'— Devices specially designed for the purpose of \For the purpose of 8A106.b., ‘disruptors’ are devices preventing the operation of an explosive device by specially designed for the purpose of preventing the rojecting a liquid, solid or frangible projectile. operation of an explosive device by projecting a liquid, ‘olid or frangible projectile. .B. For equipment specially designed for military use for \N.B. For equipment specially designed for military the disposal of improvised explosive devices, see also use for the disposal of IEDs, see also 64004. 64004. \Note 8A106 does not apply to equipment when Note 8A106 does not apply to equipment when accompanying its operator. accompanying its operator. 19. |Change in the quipment for producing metal alloys, metal alloy powder [Equipment designed to produce metal alloy powder or entry at 8B102 _ jor alloyed materials, specially designed to avoid particulate materials and having all of the following: ‘ontamination and specially designed for use in one of the 8. Specially designed to avoid contamination; and processes specified by 8C102.c.2. b. Specially designed for use in one of the processes specified by 8C102.c.2. 20. [New Entry and 8९101... Materials specially designed for absorbing 8९101... Materials specially designed for absorbing echnical Note 100९0 to C101.a. electromagnetic radiation, or intrinsically conductive polymers, as follows: a. Materials for absorbing frequencies exceeding 2 x 108 Hz but less than 3 x 1012 Hz; ote 1: _8C101.a does not apply to: electromagnetic radiation, or intrinsically conductive polymers, as follows: a. Materials for absorbing frequencies exceeding 2 x 108 fote I: 3101. 4 does not apply to: Page 10 of 26 IHz but less than 3 x 1012 Hz;

a. Hair type absorbers, constructed of natural or synthetic fibres, with non-magnetic loading to provide absorption; b. Absorbers having no magnetic loss and whose incident surface is non-planar in shape, including pyramids, cones, wedges and convoluted surfaces; a Planar absorbers, having all of the following:

1. Made from any of the following: a. Plastic foam materials (flexible or non-flexible) with -arbon-loading, or organic materials, including binders, providing more than 5% echo compared with metal over a bandwidth exceeding +15% of the centre frequency of the incident energy, and not capable of withstanding emperatures exceeding 450 K (177° C); or
2. Ceramic materials providing more than 20% echo ompared with metal over a bandwidth exceeding +15% of the centre frequency of the incident energy, and not capable of withstanding temperatures exceeding 800 K (527°C); . Tensile strength less than 7 x 10 N/m ; and 6 2 . Compressive strength less than 14 x 10 N/m ; d. Planar absorbers made of sintered ferrite, having all of the following: ॥. A specific gravity exceeding 4.4; and . A maximum operating temperature of 548 K (275°C) or less; a. Hair type absorbers, constructed of natural or synthetic fibres, with non-magnetic loading to provide absorption; b. Absorbers having no magnetic loss and whose incident surface is non-planar in shape, including pyramids, cones, wedges and convoluted surfaces; Ie. Planar absorbers, having all of the following:
3. Made from any of the following: a. Plastic foam materials (flexible or non-flexible) with ‘arbon-loading, or organic materials, including binders, providing more than 5% echo compared with metal over a bandwidth exceeding +15% of the centre frequency of the incident energy, and not capable of withstanding femperatures exceeding 450 K (177° C); or b. Ceramic materials providing more than 20% echo compared with metal over a bandwidth exceeding +15% of the centre frequency of the incident energy, and not apable of withstanding temperatures exceeding 800 K (527°C); — . Tensile strength less than 7 x 10 N/m ; and 5 6 2 . Compressive strength less than 14 x 10 N/m ; d. Planar absorbers made of sintered ferrite, having all of the following: J. A specific gravity exceeding 4.4; and . A maximum operating temperature of 548 K (275°C) r less; e. Planar absorbers having no magnetic loss and fabricated from ‘open-cell foam' plastic material with a density of 0.15 grams/cm3 or less. Technical Note 'Open-cell foams' are flexible and porous materials, aving an inner structure open to the atmosphere. 'Open- ell foams' are also known as reticulated foams. Note 2: Nothing in Note | releases magnetic materials 10 provide absorption when contained in paint.

[Technical Note 8C102 8९102 ‘hanged in [Metal alloys, metal alloy powder and alloyed materials, as /Metal alloys, metal alloy powder and alloyed materials, 8९102 ‘ollows: as follows: (3९९ Commodity Identification Note 1 of SCOMET list) (3९९ Commodity Identification Note 1 of SCOMET list) ote 8C102 does not apply to metal alloys, metal alloy \Note 8C102 does not apply to metal alloys, metal powder andalloyed materials, specially formulated for alloy powder andalloyed materials, specially formulated ‘oating purposes. for coating purposes. Technical Notes . The metal alloys in 8C102 are those containing a higher \Technical Notes percentage by weight of the stated metal than of any other _|I.The metal alloys in 8C102 are those containing a element. igher percentage by weight of the stated metal than of .'‘Stress-rupture life' should be measured in accordance any other element. ith ASTM standard E-139. .‘Stress-rupture life’ should be measured in accordance . 'Low cycle fatigue life' should be measured in accordancewith ASTM standard E-139. ith ASTM Standard E-606 'Recommended Practice for . ‘Low cycle fatigue life' should be measured in \Constant-Amplitude Low-Cycle Fatigue Testing’ or national accordance with ASTM Standard E-606 ‘Recommended equivalents. Testing should be axial with an average stress Practice for Constant-Amplitude Low-Cycle Fatigue ‘atio equal to | and a stress-concentration factor (Kt) equal \Testing' or national equivalents. Testing should be axial ‘o 1. The average stress ratio is defined as maximum stress with an average stress ratio equal to | and a stress- inus minimum stress divided by maximum stress. oncentration factor (Kt) equal to 1. The average stress ‘atio is defined as maximum stress minus minimum stress divided by maximum stress. 22. \Change in 80106 C106 8C106.d. [Fluids and lubricating materials, as follows: luids and lubricating materials, as follows: ja. (Reserved) . (Reserved) b. Lubricating materials containing, as their principal . Lubricating materials containing, as their principal Page 11 of 26

ingredients, any of the following:

1. Phenylene or alkylphenylene ethers or thio-ethers, or their| imixtures, containing more than two ether or thio-ether ctions or mixtures thereof; or

• Fluorinated silicone fluids with a kinematic viscosity of less than 5,000 mm2/s (5,000 centistokes) measured at 298 IK (25°C); . Damping or flotation fluids having all of the following:

1. Purity exceeding 99.8%;
2. Containing less than 25 particles of 200 jm or larger in size per 100 ml: and
3. Made from at least 85% of any of the following:
4. Dibromotetrafluoroethane (CAS 25497-30-7, 124-73-2, 7336-23-8);
5. Polychlorotrifluoroethylene (oily and waxy modifications nly); or . Polybromotrifluoroethylene; having all of the following: 1... Containing 85% by weight or more of any of the following, or mixtures thereof: a. Monomeric forms of perfluoropolyalkylether- triazines or perfluoroaliphatic-ethers; Perfluoroalkylamines: s
6. Perfluorocycloalkanes; or d. Perfluoroalkanes;

Density at 298 K (25°C) of 1.5 g/ml or more; 3. In a liquid state at 273 K (0°C); and 4, Containing 60% or more by weight of fluorine. 06. 8C106.d. does not apply to materials specified and packaged as medical products. d. Fluorocarbon fluids designed for electronic cooling andi. and having all of the following: ingredients, any of the following:

1. Phenylene or alkylphenylene ethers or thio-ethers, or heir mixtures, containing more than two ether or thio- ether functions or mixtures thereof: or
2. Fluorinated silicone fluids with a kinematic viscosity of less than 5,000 mm2/s (5,000 centistokes) measured at 298 K (25°C); . Damping or flotation fluids having all of the following:
3. Purity exceeding 99.8%;
4. Containing less than 25 particles of 200 jum or larger in Size per 100 ml; and
5. Made from at least 85% of any of the following: la. Dibromotetrafluoroethane (CAS 25497-30-7, 124-73- 2, 27336-23-8): b. Polychlorotrifluoroethylene (oily and waxy \odifications only); or . Polybromotrifluoroethylene: Fluorocarbon fluids designed for electronic cooling 1... Containing 85% by weight or more of any of the following, or mixtures thereof: a. Monomeric forms of perfluoropolyalkylether- triazines or perfluoroaliphatic-ethers; Perfluoroalkylamines: Perfluorocycloalkanes; or Perfluoroalkanes; Density at 298 K (25°C) of 1.5 g/ml or more; In a liquid state at 273 K (0°C); and Containing 60% or more by weight of fluorine. ००९०७ Note 80106.9. does not apply to materials specified and packaged as medical products. 23; hange in 8C110.c and 1४०९ 80110 a. Organic "fibrous or filamentary materials". having all of the following:

"Specific modulus" exceeding 12.7 x 10° m; and 2: Specific tensile strength" exceeding) 23.5 x 10 m: Note — 8C110.a does not apply to polyethylene. b. Carbon "fibrous or filamentary materials". having all of the following: 1. "Specific modulus" exceeding 14.65 x 10' m; and 2. — "Specific tensile strength" exceeding 26.8. x 10° m: ote 8C110.b does not apply to: a. "Fibrous or filamentary materials", for the repaii of "civil aircraft" structures or laminates, having all of the following: An area not exceeding I m’; A length not exceeding 2.5 m; and A width exceeding 15 mm. Mechanically chopped, milled or cut carbon "fibrous or filamentary materials" 25.0 mm or less in length runs . Inorganic "fibrous or filamentary materials", having all of he following: 1, "Specific modulus" exceeding 2.54 x 106 m; and 2. Melting, softening. decomposition or sublimation point exceeding 1,922 K (1,649°C) in an inert environment; 8C110 4. Organic "fibrous or _ filamenta materials", having all of the following: 1. "Specific modulus" exceeding} 12.7 x 10° m; and 2: pecific tensile strength" exceeding} 23.5 x 10° m: fote — 8C110.a does not apply to polyethylene. b. Carbon "fibrous or __filamenta materials", having all of the following: 1. "Specific modulus" exceeding 14.65 x 10° m; and 2. "Specific tensile strength" 26.82 x 10* m; exceeding 8C110.b does not apply to: "Fibrous or filamentary materials", for the repair of "civil aircraft" structures or laminates, having all of the following: An area not exceeding 1 m*; A length not exceeding 2.5 m; and A width exceeding 15 mm. "E SPS Mechanically chopped, milled or cut carbo "fibrous or filamentary materials" 25.0 mm o less in length. Inorganic "fibrous or filamentary materials" having all of the following: Having any of the following: . Composed of 50% or more by weight silicon dioxide id having a "specific modulus” exceeding 2.54 x 106 ; Or Not specified in 1.C.10.c.1.a. and having a "specific Page 12 of 26 py

ote 8C110.c does not apply to: a. Discontinuous, multiphase, polycrystalline alumina fibres lin chopped fibre or random mat form, containing 3% by eight or more silica, with a "specific modulus" of less than 10 x 106 m; b. Molybdenum and molybdenum alloy fibres; . Boron fibres; d. Discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 2,043 K (1,770°C) in an inert environment. odulus" exceeding 5.6 x 106 m; and 2. Melting, softening, decomposition or sublimation point exceeding 1,922 K (1,649°C) in an inert environment ote 8C110.c does not apply to. a Discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, ‘ontaining 3% by weight or more silica, with a "specific jodulus” of less than 10 x 1 0° mm: 8. Molybdenum and molybdenum alloy fibres; : Boron fibres; d. Discontinuous ceramic fibres with a melting, ‘oftening, decomposition or sublimation point lower than 043 K (1,770°C) in an inert environment. 24. \Changes in 84201 84201 83201 1. 1, Anti-friction bearings and bearing systems, as follows, 1. Anti-friction bearings, bearing systems and land components therefor: omponents, as follows: a. Ball bearings and solid roller ote 8A201 does not apply to balls with tolerances specified bearings, having all tolerances specified by the by the manufacturer in accordance with ISO 3290:2001 as manufacturer in accordance with ISO 492 ‘cade G5 (or national equivalents) or worse. Tolerance Class 4 or Class 2 (or national a. Ball bearings and solid roller bearings, having all equivalents), or better, and having both 'rings' olerances specified by the manufacturer in accordance with and ‘rolling elements', made from monel or 150 492 Tolerance Class 4 , or better, and having both beryllium; ‘rings’ and ‘rolling elements’ (ISO 5593), made from monel Note: 8A201.a does not apply to tapered or beryllium; roller bearings. ote 8A201.a does not apply to tapered roller bearings. | F Technical Notes echnical Notes के है 1, 'Ring' - annular part of a radial rolling

1. ‘Ring’ - annular part of a radial rolling bearing bearing incorporating one or more raceways incorporating one or more raceways (ISO 5593:1997). (ISO 5593: 1997), . ‘Rolling element’- ball or roller which rolls between
2. 'Rolling element'- ball or roller which rolls ‘aceways (ISO 5593:1997). between raceways (ISO 5593: 1997). b. (Reserved) b. (Reserved) . Active magnetic bearing systems using any of the ०. Active magnetic bearing systems following: using any of the following, and specially me तर designed components therefor:
3. Materials with flux densities of 2.0 T or greater and yield 1... Materials with flux densities of 2.0 T or ptrengths greater than 414 MPa; : greater and yield strengths greater than
4. All-electromagnetic 3D homopolar bias designs for 414 MPa; jactuators; or न 2, All-electromagnetic 3D homopolar
5. High temperature (450 K (177°C) and above) position bias designs for actuators; or Sensors. 3: High temperature(450 K (177°C) and above) position sensors.

(Change in entry 8A201.c Active magnetic bearing systems using any of the | 8A201.cActive magnetic bearing systems using any at 8A201.c. following: of the following, and specially designed components

1. Materials with flux densities of 2.0 T or greater and yield | therefor: strengths greater than 414 MPa: ine Materials with flux densities of 2.0 T or
2. All-electromagnetic 3D homopolar bias designs for greater and yield strengths greater than jactuators; or 414 MPa; . High temperature (450 K (177°C) and above) position

All-electromagnetic 3D homopolar bias sensors. designs for actuators; or 3. High temperature(450 K (177°C) and above) position sensors. 26. [New Note 4 is 8B201 1. Machine tools and any combination 8B201 1. Machine tools and any added to 8B201 thereof, for removing (or cutting) metals, combination thereof, for removing (or ceramics or "composites", which, according to the manufacturer's technical specification, can be equipped with electronic devices for "numerical control", as follows: Note 1 68201 does not apply to special purpose machine tools limited to the manufacture of gears. For such machines, see 8B203. cutting) metals, ceramics or "composites", which, according to the manufacturer's technical specification, can be equipped with electronic devices for "numerical control", as follows: Note 1 88201 does not apply to special purpose machine tools limited to the manufacture o, Page 13 of 26 ५५

Note'2 $8201 does: not apply 11 special. purpose gears. For such machines, see 8B203. machine tools limited to the manufacture of | Note 2 8B201 does not apply to special purpose any of the following: machine tools limited to the manufacture of a.Crank shafis or cam shafts; any of the following: b. Tools or cutters; a.Crank shafts or cam shafts; c.Extruder worms; 5. Tools or cutters; d.Engraved or facetted jewellery parts; or c.Extruder worms; e. Dental prostheses; d. Engraved or facetted jewellery parts; or Note 3 A machine tool having at least two of the three e-Denial prostheses: turning, milling or grinding capabilities (e.g., a Note 3 A machine tool having at least two of the turning machine with milling capability), must three turning, milling or — grinding be evaluated against each applicable entry capabilities (e.g., a turning machine with 8B201.a, b. or c. milling capability), must be evaluated against each applicable entry 8B201.a, b. or ९. Note 4. A machine tool having an additive manufacturing capability in addition to a turning, milling or grinding capability must be evaluated against each applicable entry 8B201.a., b. orc. . |Change in 88301 h. Multi-layer masks with a phase shift layer not B301.h. Multi-layer masks with a phase shift layer not 'B301.h.and {specified by 8B301.g. and designed to be used by pecified by 8b301.g. and designed to be used by note bene added [lithography equipment having a light source wavelength less|lithography equipment having a light source wavelength an 245 nm; less than 245 nm; ote 8B301.h. does not apply to multi-layer masks witha Note — 8B301.h. does not apply to multi-layer masks phase shift layer designed for the fabrication of memory ith a phase shift layer designed for devices not specified by 8A301. 6 fabrication of memory devices not specified by 8A301. IN.B. For masks and reticles, specially designed for optical sensors, see 8B602. . |Change in 8D3038D303 'Physics-based' simulation "software" specially 8D303'Computational lithography' "software" specially ind old technicalMdesigned for the "development" of lithographic, etching or [designed for the "development" of patterns on EUV- note deleted new (deposition processes for translating masking patterns into __ [lithography masks or reticles. echnical added _|specific topographical patterns in conductors, dielectrics or semiconductor materials. Technical Note Computational lithography’ is the use of computer Technical Note odelling to predict, correct, optimise and verify imaging| 'Physics-based' in 8D303 means using computations to performance of the lithography process over a range of determine a sequence of physical cause and effect events _|patterns, processes, and system conditions. based on physical properties (e.g., temperature, pressure, diffusion constants and semiconductor materials properties). ote ibraries, design attributes or associated data for the design! of semiconductor devices or integrated circuits are onsidered as "technology". . (Change in note 2)8E302 8E302 ind 3 and a. A ‘vector processor unit’ designed to perform 8... A''vector processor unit’ designed to perform echnical note is more than two calculations on floating-point vectors more than two calculations on 'floating- dded to 8E302 (one-dimensional arrays of 32-bit or larger numbers) point’ vectors (one-dimensional arrays of 32- simultaneously; bit or larger numbers) simultaneously; Technical Note Technical Note A ‘vector processor unit' is a processor element with A ‘vector processor unit' is a processor built-in instructions that perform multiple element with built-in instructions that calculations on floating-point vectors (one- perform multiple calculations on ‘floating- dimensional arrays of 32-bit or larger numbers) point’ vectors (one-dimensional arrays of simultaneously, having at least one vector arithmetic 32-bit or larger numbers) simultaneously, logic unit and vector registers of at least 32 having at least one vector arithmetic logic elements each. unit and vector registers of at least 32 elements each. b. Designed to perform more than four 64-bit or larger floating-point operation results per cycle; or 0. Designed to perform more than; four’ 64- bit or larger ‘floating-point’ operation results c. Designed to perform more than eight 16-bit fixed- per cycle; or Page 14 of 26 81

point multiply-accumulate results per cycle (e.g., digital manipulation of analogue information that has been previously converted into digital form, also known as digital "signal processing"). ote I 8E302 does not apply to "technology" for multimedia extensions. ‘ote 28302 does not apply to "technology" for micro- processor cores, having all of the ‘ollowing: a Using "technology" at or above 0.130 um; and b. Incorporating multi-layer structures with five or fewer eral layers. ote 38E302 includes "technology" for the "development" or "production" of digital signal processors and digital array, processors. c. Designed to perform more than eight 16- bit ‘fixed-point’ multiply-accumulate results per cycle (e.g., digital manipulation of analogue information that has been previously converted into digital form, also known as digital "signal processing"). Note 1 85302 does not apply to "technology" for multimedia extensions. Note 28E302 does not apply to "technology" for micro-processor cores, having all of the following: la 088 “technology” at or above 0.130 um; and 4, Incorporating multi-layer structures with five or Sewer metal layers. Note 38E302 includes "technology" for the "development" or "production"of digital signal processors and digital array processors. Technical Notes 1. For the purpose of 8E302.a. and 8E302.b., floating-point’ is defined by IEEE-754. . For the purpose of 8E302.c.,'fixed-point' efers to a fixed-width real number with both an integer component and a fractional component, and hich does not include integer-only formats. 30. iNew entry added| jas 8E304 INot exist. New Entry at 8E304 added E304 "Technology" "required" for the slicing, grinding and polishing of 300 mm diameter silicon afers toachieve a'Site Front least sQuares Range! 'SFQR’) less than or equal to 20 nm at any site of 26 mm 8 mm on the front surface of the wafer and an edge exclusion less than or equal to 2 mm. Technical Note For the purpose of 8E304, 'SFOR' is the range of jaximum deviation and minimum deviation from front eference plane, calculated by least square method with all front surface data including site boundary within a ite, 51 hange in E401.c. (Note 1) nd Technical \Notes- deleted 8E401 "Technology" as follows: "Technology" according to the General Technology Note, for the "development", "production" or "use" of equipment or "software" specified by 8A4 or 8D4. b. "Technology" according to the General Technology Note. other than that specified by 8E401.a., for the "development" or "production" of equipment as follows:

1. "Digital computers" having an ‘Adjusted Peak Performance' (‘APP’) exceeding 8.0 Weighted TeraFLOPS WT);
2. "Electronic assemblies" specially designed or modified ‘or enhancing performance by aggregation of processors so at the 'APP' of the aggregation exceeds the limit in 8E401.b.1. . "Technology" for the "development" of "intrusion software". ote 1: 8E401.a and 8E401.c do not apply to ‘vulnerability disclosure’ or ‘cyber incident response’. fote 2 Note 1 does not diminish national authorities' rights fo ascertain compliance with 8E401.a and 8E401.c "Technology" as follows: omy! . "Technology" according to the General echnology Note, for the "development", I'production" or "use" of equipment or "software" specified by 8A4 or 8124. "Technology" according to the General echnology Note, other than that specified by 8E401.a., for the "development" or "production" of equipment as follows: 1."Digital computers" having an ‘Adjusted Peak Performance’ (‘APP’) exceeding 8.0 Weighted TeraFLOPS (WT): 2."Electronic assemblies" specially designed or modified for enhancing performance by aggregation of processors so that the 'APP’ of the aggregation exceeds the limit in 8E401.b.1. c. "Technology" for the "development" of "intrusion software". Notel: 8E401.a and 8E401.c do not apply to “vulnerability disclosure" or “cyber incident response”. Note 2 Note 1 does not diminish national authorities’ rights to _ ascertain Page 15 of 26 Ow

Technical Notes J. "Vulnerability disclosure' means the process of identifving, reporting, or communicating a vulnerability to, or analysing a vulnerability with, individuals or organizations responsible for conducting or coordinating emediation for the purpose of resolving the vulnerability. . ‘Cyber incident response’ means the process of exchanging necessary information on a cyber security incident with individuals or organizations responsible for ‘onducting or coordinating remediation to address the ber security incident. compliance with 8E40l.a and 8E401.c. Technical Notes- Deleted 32. \Changes in 84501.॥.1 84501.1. Counter Improvised Explosive Device (IED) equipment and related equipment, as follows: 1. Radio Frequency (RF) transmitting equipment, no specified by 8A501.f, designed or modified for prematurely activating or preventing the initiation of Improvised Explosive Devices; 2. Equipment using techniques designed to enable radio communications in the same frequency channels on which co-located equipment specified by 8A501.h.1 is transmitting. 18. See also Category 6. 8A501.h.Counter Improvised Explosive Device (IED) equipment and related equipment, as follows: . Radio Frequency (RF) transmitting equipment, not specified by 8A501.f, designed or modified for prematurely activating or preventing the initiation of Improvised Explosive Devices (IEDs); 2. Equipment using techniques designed to enable radio communications in the same frequency channels on which co-located equipment specified by 8ASO0I.h.1 is transmitting. NB. See also Category 6. 33. |Changes in 8A501.j.2.a and echnical note is deleted 84501 |. IP network communications surveillance systems r equipment, and specially designed components therefor, having all of the following:

1. Performing all of the following on a carrier class IP inetwork (e.g, national grade IP backbone): a. Analysis at the application layer (e.g, Layer 7 of Open Systems Interconnection (OSI) model (ISO/IEC 7498-1)); b. Extraction of selected metadata and application content e.g, voice, video, messages, attachments); and . Indexing of extracted data; and
2. Being specially designed to carry out all of the following:
3. Execution of searches on the basis of ‘hard selectors’; and b. Mapping of the relational network of an individual or of a group of people. ote 8A501.j does not apply to systems or equipment, pecially designed for any of the following: a. Marketing purpose; . Network Quality of Service (OoS);or . Quality of Experience (QoE). Technical Note ‘Hard selectors’: data or set of data, related to an individual (e.g, family name, given name, e-mail, street address, phone umber or group affiliations). 84501 j.IP network communications surveillance systems or equipment, and specially designed omponents therefor, having all of the following:
4. Performing all of the following on a carrier class I[P network (e.g, national grade IP backbone): la. Analysis at the application layer (e.g, Layer 7 of Open Systems Interconnection (OSI) model ISO/IEC 7498-1); b. Extraction of selected metadata and application ontent (e.g, voice, video, messages, attachments); id . Indexing of extracted data: and -Being specially designed to carry out all of the following: Execution of searches on the basis of “hard electors”; and Ib. Mapping of the relational network of an individual or of a group of people. ‘ote 8A501.j does not apply to systems or equipment, specially designed for any of the following: Marketing purpose; ‘etwork Quality of Service (QoS);or \Quality of Experience (QoE). Technical Note - Deleted
5. |New entry at S8D501.e. added iNew Entry at 8D501.e added 8DS01 छः "Software", other than that specified by 8D501.a. or 8D501.c., specially designed or modified for monitoring or analysis by law enforcement, providing all of the following:
6. Execution of searches on the basis of "hard selectors" of either the content of communication or metadata acquired from a communications service provider using a ‘handover interface’; and Technical Notes

For the purposes of 5.D.1.e., a ‘handover interface’ is a physical and logical interface, designed for use by an authorised law enforcement authority, Page 16 of 26

across which targeted interception measures are requested from a communications service provider and the results of interception are delivered from @ communications service provider to the requesting authority. The ‘handover interface’ is implemented within systems or equipment (e.g., mediation devices) that receive and validate the interception request, and deliver to the requesting authority only the results of interception that fulfil the validated request. 2. ‘Handover interfaces' may be specified by international standards (including but not limited to ETSI TS 101 331, ETSI TS 101 671, 3GPP TS 33.108) or national equivalents. 2. Mapping of the relational network or tracking the movement of targeted individuals based on the esults of searches on content of communication or etadata or searches as described in5.D.1.e.1. ote 8D501.e does not apply to "software" specially designed or modified for any of the following: a. Billing purposes; . Network Quality of Service (QoS); . Quality of Experience (QoE); ४. Mediation devices; or e. Mobile payment or banking use. 35. sd in E501 "Technology" as follows: BES01 “Technology” as follows: mended . "Technology" according to the General Technology Note | a."Technology" according to the General ‘or the "development", "production" or "use" (excluding Technology Note for the "development", operation) of equipment, functions or features specified by "production" or "use" (excluding operation) of 8A501 or "software" specified by 8D501.a: equipment, functions or features specified by 8A501 or "software" specified by 8D501.a. or 8D501.e.; iach wns f . b.Specific "technology" as follows: — ee om ne devel ” 1."Required" "technology" for the rs कर snes = SnD IOEY, 201 We CevELCp mene Cr "development" or "production" of production of telecommunications equipment specially telecommunications equipment specially designed designed to be used on board satellites: to be used on board satellites: 2. "Technology" for the "development" or "use" of "laser" 2."Technology" for the "development" or "use" of कक eHOn eciutignes yall we का कप oF "laser" communication techniques with the automatically BCqUHIDS and tracking signals and capability of automatically acquiring and tracking maintaining communications through exoatmosphere or sub- signals and maintaining communications through Burface (water) media; exoatmosphere or sub-surface (water) media; 36. |Entry at 8A502 "Information security" systems, equipment and 8A502"Information security” systems, equipment and A 502.a. omponents, as follows: omponents. as follows: mended NB. For “satellite navigation system” NB. For “satellite navigation system” receiving equipment containing or receiving equipment containing or employing decryption see 8A705., and employing decryption see 8A705., Jor related decryption "sofiware" and and for related decryption "technology" see 8D705., and 8E701. ‘sofiware" and "technology" see 8D705., and 8E701. Designed or modified to use 'cryptography for a. Designed or modified to use data confidentiality’ having a ‘described security ‘cryptography for data algorithm’, where that cryptographic capability is confidentiality’ having a ‘described usable, has been activated, or can be activated by security algorithm’, where that means of "cryptographic activation” not cryptographic capability is usable, employing a secure mechanism, as follows: has been activated, or can be activated by any means other than secure "cryptographic activation", as follows: [Remaining below entries under this sub-categories shallRemaining below entries under this sub-categories remain unchanged Era remain unchanged 37. \Change in 8A502.a. Note 2.1. 8A502.a. Note 2.1. 8A502.a. Note items, where the “information security” functionality is tems, where the "information security" functionality is 2.f. imited to wireless "personal area limited to wireless "personal area network" functionality Page 17 of 26 |

etwork" functionality, meeting all of the following: J. Implement only published or commercial cryptographic tandards;and . The cryptographic capability is limited to a nominal operating rangenot exceeding 30 metres according to the anufacturer ‘sspecifications, or not exceeding 100 metres according to themanufacturer's specifications for equipmen hat cannot interconnectwith more than seven devices; implementing only published or commercial ryptographic standards retrieve binary data from a; 38. Entry at 8A502.a. Note h. lamended 8A502.a. Note h Routers, switches or relays, where the "information ecurity" functionality is limited tothe tasks of "Operations, Administration or Maintenance" ("OAM") implementing onlypublished or commercial cryptographic standards; A502.a. Note h outers, switches, gateways or relays, where the information security" functionality is limited to the tasks of "Operations, Administration or Maintenance" "OAM") implementing only published or commercial ryptographic standards a9! New Entry ddedat A 504.b. New Entryat 84504.b added. 84504.0. Items, not specified by 8A405 or 8A504.a., designed to perform all of the following:

1. ‘Extract raw data’ from a computing or ommunications device; and

Circumvent "authentication" or authorisation ontrols of the device, in order to perform the function described in 8A504.b.1. 11 8 'Extract raw data' from a computing or ‘ommunications device means to retrieve binary data ‘om a storage medium, e.g. RAM, flash or hard disk, of the device without interpretation by the device's operating system or file system. ote | 8A504.b. does not apply to systems or equipment specially designed for the "development" or "production" of a computing or communications levice. ote2 8A504.b, does not include: a. Debuggers, hypervisors; 8. Items limited to logical data extraction; c. Data extraction items using chip-off or JTAG; or d. Items specially designed and limited to jail- breaking or rooting. 40. ntry at D502.a.3 mended 10502 "Software" as follows: . "Software" specially designed or modified for the |"development", "production" or "use" of any of the following:

1. Equipment specified by 8A502 or "software" specified by 8D502.c.1;
2. Equipment specified by 8A503 or "software" specified by 8D502.c.2; or . Equipment specified by 8A504 or "software" specified by 8D502.c.3;
3. "Software" having the characteristics of a ‘cryptographic activation token’ specified by 8D502.b. . "Software" having the characteristics of, or performing or simulating the functions of, any of the following:
4. Equipment specified by 8A502.a., 8A502.c., 8A502.d. or 8A502.e.; ote 8D502.c.1. does not apply to "software" limited to the ‘asks of "OAM" implementing only published or commercial cryptographic tandards.
5. Equipment specified by 8A503; or . Equipment specified by 8A504. d. (Reserved) "Software" as follows: 810502 a. "Software" specially designed or modified for the "development", "production" or "use" of any of the following:

Equipment specified by 8A502 or "software" specified by 8D502.c.1; 2. Equipment specified by 8A503 or "software" specified by 8D502.c.2; or 3. Equipment or "software", as follows: a. Equipment specified by 8A504.a. or "software" specified by 8D502.c.3.a.; b. Equipment specified by 8A504.b. or "software" specified by 8D502.c.3.b.; b. "Software" having the characteristics of a ‘cryptographic activation token’ specified by 8D502.b. c. "Software" having the characteristics of, or performing or simulating the functions of, any of the following: 1. Equipment specified by 8A502.a., 8A502.c., 8A502.d. or 80 502.6.; Note 8D502.c.1. does not apply to "software" limited to the tasks of "OAM" implementing only published or commercial cryptographic standards. Page 18 of 26 “i

Equipment specified by 8A503; or Equipment, as follows: 3. Equipment specified by 8A504.a.; b. Equipment specified by 8A504.b. Note 8D502.c.3.b. does not apply to "intrusion 3; software". 41. 8D502.¢.3 8D502.c3. Equipment specified by 8A504. 8D502.c.3. Equipment, as follows: a. Equipment specified by 8A504.a,; b. Equipment specified by 8A504.b. Note 8D502.c.3.b. does not apply to "intrusion oftware". 42. |Change in E502 "Technology" as follows: 8ES02 "Technology" as follows: SE502.a. 8. "Technology" according to the General Technology Note |"Technology" according to the General Technology ‘or the "development", "production" or "use" jote for the "development", "production" or "use" of of equipment specified by 8A502, 84503, 8A504 or 88502, equipment specified by 8A502, 8A503,8A504 or or of "software" specified by 8D502.a or 88502, or of "software" specified by 8D502.a or 8D502.c; 8D502.c; 0. "Technology" having the characteristics of a Note 8E502.a. does not apply to "technology" for cryptographic activation token' specified by 8E502.b.; items specified by 8A504.b.,8D502.a.3.b. or 8D502.c.3.b. 43. 8A604.c.4 8A604.c.4 8A604.¢.4 . "Space-qualified" components for optical systems, as c. "Space-qualified" components for optical systems, as follows: follows:

1. Components lightweighted to less than 20% "equivalent iF; Components lightweighted to less density" compared with a solid blank than 20% "equivalent density" compared with of the same aperture and thickness: a solid blank of the same aperture and . Raw substrates, processed substrates having surface thickness; oatings (single-layer or multi-layer,

Raw substrates, processed metallic or dielectric, conducting, semiconducting or substrates having surface coatings (single- insulating) or having protective films; layer or multi-layer, metallic or dielectric, 3. Segments or assemblies of mirrors designed to be conducting, semiconducting or insulating) or assembled in space into an optical system having protective films; ‘ith a collecting aperture equivalent to or larger than a 3, Segments or assemblies of mirrors ingle optic 1 m in diameter; designed to be assembled in space into an 4. Components manufactured from "composite" materials optical system with a collecting aperture having a coefficient of linear thermal equivalent to or larger than a single optic 1 m expansion equal to or less than 5 x 10-6 in any coordinate in diameter: direction; 4, Components manufactured from "composite" materials having a coefficient of linear thermal expansion, in any coordinate direction, equal to or less than 5 x 10-6/K; 44. \Changes in entry8a605. a. 6. Output wavelength exceeding 975 nm but not | 8A605.a. 6.Output wavelength exceeding 975 nm at 8A605.a.6.a exceeding 1,150 nm and any of the following: but not exceeding 1,150 nm and any of the a. 'Single transverse mode' output and any of the following: following:

1. Average output power exceeding 1,000 W; or a. ‘Single transverse mode' output and any of the . Having all of the following: following: a. Average output power exceeding 500 W; and
2. Output power exceeding 1,000 W; or b. Spectral bandwidth less than 40 GHz; or
3. Having all of the following: a. Output power exceeding 500 W; and b. Spectral bandwidth less than 40 GHz; or
4. 8A605.a.6.b. 84605 .a. 6.84605 .a. 6. Output wavelength 8A605.a. 6. Output wavelength exceeding 975 nm echnical Note deleted exceeding 975 nm but not exceeding 1,150 nm and any of the following: a. ‘Single transverse mode’ output and any of the following: Ns Average output power exceeding 1,000 W; or

Having all of the following: a. Average output power exceeding 500 W; and b. Spectral bandwidth less than 40 GHz; or b. ‘Multiple transverse mode’ output and any of the following: 1, 'Wall-plug efficiency’ exceeding 18% and but not exceeding 1,150 nm and any of the following: a. 'Single transverse mode’ output and any of the following: 1, Output power exceeding 1,000 W; or 2) Having all of the following: a. Output power exceeding 500 W; and b. Spectral bandwidth less than 40 GHz; or b. ‘Multiple transverse mode’ output and any of the following:

1. 'Wall-plug efficiency’ exceeding 18% and output power exceeding 1000 Page 19 of 26

fote 1 ote 2 output power exceeding 1000 W; or 2. Output power exceeding 2 kW: a. (Reserved) b. — Output power exceeding 1 kW but not exceeding 1.6 kW and having a BPP exceeding 1.25 mmemrad; c. Output power exceeding 1.6 kW but not exceeding 2.5 kW and having a BPP exceeding 1.7 mmemrad; d. Output power exceeding 2.5 kW but not exceeding 3.3 kW and having a BPP exceeding 2.5 mmemrad: e. Output power exceeding 3.3 kW but not exceeding 6 kW and having a BPP exceeding 3.5 mm=mrad; (Reserved) (Reserved) Output power exceeding 6 kW but not exceeding 8 kW and having a BPP exceeding 12 mm-mrad; or i, Output power exceeding 8 kW but not exceeding 10 kW and having a BPP exceeding 24 mm«mrad; oS For the purpose of 6.A.5.a.6.b., Note 2.a., ‘brightness’ is defined as the output power of the "laser" divided by the squared Beam Parameter Product (BPP), i.e., (output power)/BPP . Technical Note ‘Wall-plug efficiency' is defined as the ratio of "laser" output power (or "average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger. 8A605.a.6.b. does not apply to ‘multiple transverse ‘ode’, industrial "lasers"with output power exceeding 2 ki and not exceeding 6 kW with a total mass greater than 1,200 g. For the purpose of this note, total mass includes all components required to operate the "laser", e.g, "laser" power supply, heat exchanger, but excludes external optics fo beam conditioning or delivery. 8A605.a.6.b. does not apply to ‘multiple ‘ansverse mode’, industrial "lasers" having any of the following: W: or 2. Output power exceeding 2 kW: 8A605.a.6.b. does not apply to ‘multiple transverse mode’, industrial "lasers"with output power exceeding 2 kW and not exceeding 6 kW with a total mass greater than 1,200 kg. For the purpose of this note, total mass includes all components required to operate the "laser", e.g. “laser”, power supply, heat exchanger, but excludes external optics for beam conditioning or delivery. 84605.a.6.b. does not apply to ‘multiple transverse mode’, industrial "lasers" having any of the following: (Reserved) Output power exceeding 1 kW but not exceeding 1.6 kW and having a BPP exceeding 1.25 mm=mrad; Output power exceeding 1.6 kW but not exceeding 2.5 kW and having a BPP exceeding 1.7 mmemrad; Output power exceeding 2.5 kW but not exceeding 3.3 kW and having a BPP exceeding 2.5 mm-mrad; Output power exceeding 3.3 kW but not exceeding 6 kW and having a BPP exceeding 3.5 mmemrad; (Reserved) (Reserved) Output power exceeding 6 kW but not exceeding 8 kW and having a BPP exceeding 12 mm+mrad; or Output power exceeding 8 kW but not exceeding 10 kW and having a BPP exceeding 24 mm+mrad; Technical Note -deleted Technical Note ‘Wall-plug efficiency’ is defined as the ratio of "laser" output power (or “average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger. hange in 8A608.i 8A608.i. Providing ground-based operation with a Imaximum ‘instrumented range’ exceeding 185 km: Note 8A608.i does not apply to: a. Fishing ground surveillance radar; enroute air traffic control and having all of the following: less; 2. Configured so that radar target data can be one or more civil ATC centres; and 4. Permanently installed. G Weather balloon tracking radars. Technical Note specified unambiguous display range of a radar. 6. Ground radar equipment specially designed for

1. A maximum ‘instrumented range’ of 500 km or'| transmitted only one way from the radar site to
2. Contains no provisions for remote control of the radar scan rate from the enroute ATC centre; For the purposes of 8A608.i., ‘instrumented range’ is the 8A608.i. Providing ground-based operation with a imaximum ‘instrumented range’ exceeding 185 km; Note 8A608.i does not apply to: a. _ Fishing ground surveillance radar;

Ground radar equipment specially designed for enroute air traffic control and having all of the following: 1.4 maximum ‘instrumented range’ of 500 km or less; 2.Configured so that radar target data can be transmitted only one way from the radar site to one or more civil ATC centres; 3.Contains no provisions for remote control of the radar scan rate from the enroute ATC centre; and 4.Permanently installed. @ Weather balloon tracking radars. Technical Note For the purposes of 8A608.i., ‘instrumented range’ is the specified unambiguous display range of a radar. Page 20 of 26

47, के entry added it 8A904.h. iNew entry added at 8A904.h. 8A904.h. "Sub-orbital craft". 48. |Change in entry |Ramjet/scramjet/pulse jet/'combined cycle engines’, [Ramjet, scramjet or ‘combined cycle engines’, and t 8A911 including devices to regulate combustion, and specially designed components therefor. specially designed components therefor, usable in the Technical Note systems specified in 5A101 or 5B.d or 58.8 ‘or the purposes of 8A911., ‘combined cycle engines’ Technical Note combine two or more of the following types In 8A911, ‘combined cycle engines' are the engines that of engines: employ two or more cycles of the following types

• Gas turbine engine (turbojet, turboprop and turbofan); of engines: gas-turbine engine (turbojet, turboprop,
• Ramjet or scramjet; ‘urbofan and turbo shaft), ramjet, scramjet, pulse jet,
• Rocket motor or engine (liquid/gel/solid-propellant and pulse detonation engine, rocket motor (liquid/gel/solia- brid). propellant and hybrid).

\Change in entry 8A912 84912 lat 84912 "Unmanned Aerial Vehicles" ("UAVs"), unmanned "Unmanned Aerial Vehicles" ("UAVs"), unmanned airships", related equipment and components, as "airships", related equipment and components, a follows: follows: NB. For "UAVs" that are "sub-orbital craft", see 9.AAA. . "UAVs" or unmanned "airships", designed to have a. "UAVs" or unmanned "airships", ontrolled flight out of the direct ‘natural vision’ of designed to have controlled flight out of ९ ‘operator’ and having any of the following: the direct ‘natural vision’ of the ‘operator’

1. Having all of the following: and having any of the following: . A maximum ‘endurance’ greater than or equal to 30

Having all of the following: iminutes but less than | hour; and a. A maximum. ‘endurance’ b. Designed to take-off and have stable controlled flight in greater than or equal to 30 minutes but ind gusts equal to or exceeding less than 1 hour; and 46.3 km/h (25 knots); or b. Designed to take-off and 2. A maximum ‘endurance’ of | hour or greater; have stable controlled flight in wind gusts Technical Notes equal to or exceeding 46.3 km/h (25

1. For the purposes of 8A912.a, ‘operator’ is a person who knots); or linitiates or commands the "UAV" or

A. maximum: ‘endurance! of i unmanned "airship" flight. hour or greater; . For the purposes of 8A912.a, ‘endurance’ is to be 7 . calculated for ISA conditions (ISO 2533: 1975) echnical Notes ; हि कल "UAV" or unmanned "airship" flight. 2. For the purposes of 8A912.a, ‘endurance’ is to be calculated for ISA conditions (ISO 2533:1975) at sea level in zero wind. 3. For the purposes of 8A912.a, ‘natural vision’ means unaided human sight, with or without corrective lenses. 50. |New Noteadded 8D905 D905 lat 8D905 |'Software" specially designed or modified for the operation |"Software" specially designed or modified for the of items specified by 8A904.e or 8A904.f. operation of items specified by 8A904.¢ or 8A904.f. .B. For "software" for items listed in 8A904.d. that are incorporated into "spacecraft payloads", see the appropriate Categories. 51. |Change in entry |8E903.a.11 Hollow fan blades: E903.a.11'Fan blades' having all of the following: at 8E903.a.11 . 20% or more of the total volume being one or more losed cavities containing vacuum or gas only; and lb. One or more closed cavities having a volume of 5 cm’ or larger; Technical Note or the purposes of 8E903.a.11., a ‘fan blade’ is the aerofoilportion of the rotating stage or stages, which provide both ‘ompressor and bypass flow in a gas turbine engine. 52. |Note 3 of Note 3 of Category 6: Subject to Notes 4-6 below, an Note 3 of Category 6 Subject to Notes 4-6 below, ategory 6 authorization from Department of _ Defence an authorization from Department of ‘Munitions List’ | Production, Ministry of Defence would be required for Defence Production, Ministry of Defence modified and export of items in this Munitions list. This is as per the would be required for export of items in this ees entry added| Standard Operating Procedures issued by Department Munitions list. This is as per the Standard it 64001 of Defence Production. Operating Procedures issued by Department of Defence Production.However, for export of items under sub-Category 64007 and 6A008, an export authorisation would be Page 21 of 26 py

6A001.a. Rifles and combination guns, handguns, machine,sub-machine and volley guns; Note 6A001.a does not apply to the following: a. Rifles and combination guns, manufactured earlier than 1938; b. Reproductions of rifles and combination guns, the originals of which were manufactured earlier than 1890; c.Handguns, volley guns and machine guns, manufactured earlier than 1890, and their reproductions; required from the Directorate General of Foreign Trade (DGFT), as per SCOMET policy and procedures. 6A001.a.Rifles and combination guns, handguns, machine,sub-machine and volley guns; Note 6A001.a does not apply to the following: a. Rifles and combination guns, manufactured earlier than 1938; b. Reproductions of rifles and combination guns, the originals of which were manufactured earlier than 1890; c. Handguns, volley guns and machine guns, manufactured earlier than 1890, and their reproductions; d.Rifles or handguns, specially designed to discharge |d. Rifles or handguns, specially designed to an inert projectile by compressed air or (02. discharge an inert projectile by compressed air or (02. ९. Handguns specially designed for any of the Sollowing:

1. Slaughtering of domestic animals
2. Tranquilising of animals.

{Change in 6A002}6A002 Smooth-bore weapons with a calibre of 20 mm or A002 Smooth-bore weapons with a calibre of 20 mm ore, other weapons or armament with a calibre greater r more, other weapons or armament with a calibre an 12.7 mm (calibre 0.50 inches), projectors and ‘eater than 12.7 mm (calibre 0.50 inches), projectors accessories, as follows, and specially designed components pecially designed or modified for military use and erefor: accessories, as follows, and specially designed omponents therefor:: 54. Change in 6A002.a. Guns, howitzers, cannon, mortars, anti-tank 64002 a. Guns, howitzers, cannon, mortars, anti-tank 6A002.a. eapons, projectile launchers, military flame throwers, eapons, projectile launchers, military flame throwers, 1165, recoilless rifles, smooth-bore weapons and signature _|rifles, recoilless rifles and smooth-bore weapons; eduction devices therefor; 55. {Change in 64002 b. Smoke, gas and pyrotechnic projectors or 64002.b.Projectors, specially designed or modified fo 6A002.b. generators, specially designed or modified for military use; military use, as follows: ote 6A002.b does not apply to signal pistols.

1. Smoke canister projectors;
2. Gas canister projectors;
3. Pyrotechnics projectors; lote —— 6A002.b does not apply to signal pistols.
4. |Change in 6A002c. Weapons sights and weapon sight mounts, having {6A002.c.Accessories specially designed for the weapons 6A002.c. all of the following: Specified in 6A002.a., as follows:
5. Specially designed for military use; and
6. Weapon sights and weapon sight mounts, specially 64002.0. . Specially designed for weapons specified in 6A002.a; designed for military use;

• Reserved’

2. Signature reduction devices; 6A002 d. Mountings and detachable cartridge magazines, . Mountings; specially designed for the weapons specified in 6A002.a.
3. Detachable cartridge magazines; 6A002.d. (Reserved) ae 6 et कह and ‘ni Otheriground yebicles:and eomponents,ias mer ground vehicles and components, as 6A.006.b.2.b
4. Vehicles having all of the following: —_ . Manufactured or fitted with materials or components to rovide ballistic protection equal to or better than level III NIJ 0108.01, September 1985, or comparable national standard): . A transmission to provide drive to both front and rear heels simultaneously, including those vehicles having ditional wheels for load bearing purposes whether driven r not; . Gross Vehicle Weight Rating (GVWR) greater than 4,500 8: and . Designed or modified for off-road use; . Mine-Protected vehicle . Components having all of the following: I Vehicles having all of the following: a. Manufactured or fitted with materials or components to provide ballistic protection equal to or better than level IIT (NIJ 0108.01, September 1985), or "equivalent standards"; b. A transmission to provide drive to both front and rear wheels simultaneously, including those for vehicles having additional wheels for load bearing purposes whether driven or not; ९. Gross Vehicle Weight (GVWR) greater than 4,500 kg; and d. Designed or modified for off-road use; Rating . Specially designed for vehicles specified in 6A006.b.1.; e. _Mine-Protected vehicle Page 22 of 26 py

land b. Providing ballistic protection equal to or better than level पा (NIJ 0108.01, September 1985, or comparable national standard). 2; Components having all of the following: a. Specially designed for vehicles specified in 6A006.b.1.; and b. Providing ballistic protection equal to or better than level Ill (NIJ 0108.01, September 1985), or "equivalent standards". 58. |Change in 6A009.h. 6A009.h. 6A009.h. [Naval nuclear equipment and related equipment and uclear power generating equipment or propulsion omponents, as follows: equipment, specially designed for vessels specified in

1. Nuclear power generating equipment or propulsion 6A009.a. and components therefor specially designed or equipment, specially designed for vessels specified in ‘modified’ for military use. 6A009.a. and components therefor specially designed or ‘modified’ for military use. Technical Note Technical Note ‘or the purpose of 6A009.h.1., 'modified' means any or the purpose of 6A009.h., ‘modified' means any tructural, electrical, mechanical, or other change that tructural, electrical, mechanical, or other change that provides a non-military item with military capabilities provides a non-military item with military capabilities equivalent to an item which is specially designed for equivalent to an item which is specially designed for ilitary use. ilitary use. Note 64009.h.1. includes "nuclear reactors". ote 6A009.h. includes "nuclear reactors". .B See Commodity Identification Note 2 to SCOMET.
2. \Change in 6A013.d.2. 6A013.d.2. A013.d.2. [Hard body armour plates providing ballistic protection equal|Hard body armour plates providing ballistic protection ‘0 or greater than level III (NIJ 0101.06, July 2008). equal to or greater than level III (NIJ 0101.06, July 008), or "equivalent standards". : 64018 hange in pa ‘roduction’ equipment and components, as follows: € 'production' of products specified by Category 6, and specially designed components therefor; b. Specially designed environmental test facilities and Specially designed equipment therefor, for the certification, qualification or testing of products specified by Category 6. . Specially designed or modified ‘production’ equipment forland components, as follows: ‘Production’ equipment, environmental test facilities a.Specially designed or modified ‘production’ equipment for the 'production' of products specified by Category 6, and specially designed components therefor; b.Specially designed environmental test facilities and specially designed equipment therefor, for the certification, qualification or testing of products specified by Category 6. New entry added|6A021 "Software" as follows: 6A021.b"Software" specially designed or ‘0 6A021.b. a. "Software" specially designed or modified for any of the modified for the conduct of military rein "production" ti co offensive cyber operations; cite OPER s आर या हे OPSraMOn GR UMNIEnENGe | ait — 64006. - inchides —“efrwore! of equipment specified by Category 6: designed to destroy, damage, degrade . "Development" or "production" of materials specified by or disrupt sys fins equipmen ae alegory 6; or is te —- वि‘ : "software", specified by Category 6, : reste Nadeau 5 oe or maintenance cyber reconnaissance and cyber of "software" specified by Category

5 sts 0. Specific "software", other than that specified by 6A021.a ec and ~ corral “sana, jas follows:

1. "Software" specially designed for military use and Note2 64021.b.5. does not apply to specially designed for modelling, simulating or evaluating "vulnerability disclosure" or to "cyber imilitary weapon systems; incident response", limited to non-
2. "Software" specially designed for military use and military _ defensive cybersecurity pecially designed for modelling or simulating military readiness or response. operational scenarios; . "Software" for determining the effects of conventional, nuclear, chemical or biological weapons;
3. "Software" specially designed for military use and specially designed for Command, Communications, Control jand Intelligence (C31) or Command, Communications, ‘ontrol, Computer and Intelligence (C41) applications;
4. |New note added }6A021.c. "Software", not specified by 6A021.a. or 0 6A021.c. 6A021.b., specially designed or modified to enable equipment not specified by the Munitions List to perform e military functions of equipment specified by the (Munitions List. 6A021.c."Software", not specified by 6A021.a. ० 6A021.b., specially designed or modified to enable equipment not specified ४] Category 6 to perform the milita functions of equipment specified by the Page 23 of 26 Category

N.B. See systems, equipment or component: specified by Category 6 for genera purpose "digital computers" with installed "software" specified by 6A021.c. S.No. | Entry No. in Existing entry in SCOMET List Revised Entry in SCOMET List SCOMET (as notified vide Noti No. 03 dated 24.04.2020) [The previous entries against relevant items shall Control List be substituted as under in the SCOMET list:| Text highlighted in purple color has been added ae | 3 4 63. |New entry at |New entry added at Cat. 1A (13) 1A (13) 14 (13) added P-alkyl (H or C10, incl. cycloalkyl) N-(1- (dialkyl($C10, incl. cycloalkyl)amino))alkylidene(H or <C10, incl. cycloalkyl) phosphonamidic fluorides and corresponding alkylated or protonated salts eg. N-(1-(di-n-decylamino)-n-decylidene)-P- decylphosphonamidic fluoride (2387495-99-8) Methyl-(1- (diethylamino)ethylidene)phosphonamidofluoridate 2387496-12-8 |New entry था... |New entry added at Cat. 1A (14) 1A (14) added 1A (14) O-alkyl (H or <C10, incl. cycloalkyl) N-(1- (dialkyl(<C10, incl. cycloalkyl)amino))alkylidene(H or <C10, incl. cycloalkyl) phosphoramidofluoridates and corresponding alkylated or protonated salts e.g. O-n-Decyl N-(1-(di-n-decylamino)-n- decylidene)phosphoramidofluoridate (2387496-00-4) Methyl (1- (diethylamino)ethylidene)phosphoramidofluoridate (2387496-04-8) Ethyl (Ie (diethylamino)ethylidene)phosphoramidofluoridate 2387496-06-0 ee iNew entry at iNew entry added at Cat. 1A (15) 14 (15) added 1A (15) Methyl- (bis(diethylamino)methylene)phosphonamidofluorida te (2387496-14-0 iNew entry at iNew entry added at Cat. 1A (16) 1A (16) added 1A (16) Carbamates (quaternaries and bisquaternaries of dimethylcarbamoyloxypyridines) Quaternaries of dimethylcarbamoyloxypyridines: 1-[N,N-dialkyl(<C10)-N-(n-(hydroxyl, cyano, acetoxy)alkyl(<C10)) ammonio]-n-[N-(3- dimethylcarbamoxy-a-picolinyl)-N,N-dialkyl(<C10) ammonio]decanedibromide (n=1-8) e.g. 1-[N,N-dimethyl-N-(2-hydroxy)ethylammonio]- 10-[N-(3-dimethylcarbamoxy-a-picolinyl)-N,N- dimethylammonio]decane dibromide (77104-62-2) Bisquaternaries of dimethylcarbamoyloxypyridines: 1,n-Bis[N-(3-dimethylcarbamoxy-a-picolyl)-N,N- dialkyl(<C10) ammonio]-alkane-(2,(n-1)-dione) dibromide (n=2-12) e.g. 1,10-Bis[N-(3-dimethylcarbamoxy-a-picolyl)-N- ethyl-N-methylammonio]decane-2,9-dione dibromide (77104-00-8) No. IGLOSSARY off Existing entry in SCOMET List SCOMET List (as notified vide Noti No. 03 dated 24.04.2020) Revised Entry in SCOMET List [The previous entries against relevant items shall be substituted as under in the SCOMET list:] Text highlighted in purple color has been added ee Soe 3 mS oe 67. "Cyber incident [Cyber incident response" ‘esponse" re- 8 process of exchanging necessary information on a cybe defined Security incident with individuals or organizations ‘Cyber incident response” esponsible for conducting or coordinating remediation t The process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting __ or Page 24 of 26 W

address the cyber security incident. coordinating remediation to address the cybersecurityincident.

"Equivalent

• new entry "Equivalent standards" standards" defin omparable national or international standards ed ecognised by one or more Wassenaar Arrangement Participating States and applicable to the relevant entry. i Hard selectors"| new entry "Hard selectors" defined Data or set of data, related to an individual (e.g., family name, given name, e-mail, street address, phone number group affiliations).

70. |"Instrumented |‘Instrumented range”

• definition deleted range" -Deleted e specified unambiguous display range of a radar.

71. |New definition of*Personal area network” Personal area network” "Personal area [A data communication system having all of the following |A data communication system having all of the etwork" para. |characteristics: following characteristics: . is amended ja. Allows an arbitrary number of independent or a. Allows an arbitrary number of ind new interconnected ‘data devices’ to communicate directly with independent or interconnected 'data devices' echnical Note 2 each other; and to communicate directly with each other; lis added b. Is confined to the communication between devices within and immediate vicinity of an individual person or device b. Is confined to the communication ontroller (e.g., single room, office, or automobile, and their between devices within the immediate nearby surrounding spaces). physical vicinity of an individual person or Technical Note device controller (e.g., single room, office 'Data device' means equipment capable of transmitting ० or automobile). ‘eceiving sequences of digital information. Technical Notes

'Data device' means equipment capable ० transmitting or receiving sequences of digital information. 2. The "local area network" extends beyond the geographical area of the "personal are network". 72. |"Resolution"- Resolution” definition deleted [Deleted e least increment of a measuring device; on digita instruments, the least significant bit. (Ref. America ational Standards Institute (ANSI) B-89.1.12) 73. |New Definition |"'Satellite navigation system" Satellite navigation system" f "Satellite A system consisting of ground stations, a constellation of _ |A system consisting of ground stations, a constellation of] navigation satellites, and receivers, that enables receiver locations to be Batellites, and receivers, that enables ystem". alculated on the basis of signals received from the receiver locations to be calculated on the basis of signals cronyms GNSSkatellites. received from the satellites. It includes Global Navigation| 10 RNSS are Satellite Systems and Regional Navigation Satellite deleted Systems. 74. |"Sub-orbital

• new entry |"Sub-orbital craft" raft" defined A craft having an enclosure designed for the transport of people or cargo, which is designed to: a. Operate above the stratosphere; b. Perform a non-orbital trajectory; and c. Land back on Earth with the people or cargo intact.

75. |New definition ofSuperalloy” Superalloy” Superalloy" ickel-, cobalt- or iron-base alloys having strengths |Nickel-, cobalt- or iron-base alloys having a stress superior to any alloys in the AISI 300 series at pture life greater than 1000 hours at 400 MPa and an femperatures over 922 K (649°C) under severe timate tensile strength greater than 850 MPa, at 922 environmental and operating conditions. IK (649°C) or higher.
76. |"Vulnerability | new entry "Vulnerability disclosure" disclosure" he process of identifying, reporting or communicating defined (former local definition) erm “CEP” re- defined “Circular Error Probable (CEP)” In a circular normal distribution, the radius of the circle ‘ontaining 50% of the individual measurements being made, or the radius of the circle within which there is a 50% vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting r coordinating remediation for the purpose of esolving the vulnerability. “Circular Error Probable (CEP) or Circle of Equal robability” a circular normal distribution, the radius of the circle ontaining 50% of the individual measurements being Page 25 of 26 sa

probability of being located. made, or the radius of the circle within which there is a 0% probability of being located. | Acronyms and Revised Entry in SCOMET List Abbreviations [The previous entries against relevant items shall used in Existing entry in SCOMET List Ee be Substituted as under in the SCOMET list:] SCOMET List (as notified vide Noti No. 03 dated 24.04.2020) text हद क purple-color: Nas teen’ added) ESS ae) iain ee ES are) 4. 77.

• new entry

new entry AMPS: Aircraft Missile Protection System “४ AMPS”

| entry deleted [EEPROMS: Electrically Erasable Programmable Read entry deleted ४ EEPROMS” Only Memo: 79. | new entry new entry EMP: Electromagnetic Pulse (* EMP” etl

• new entry
• new entry IESD: Electrostatic Discharge ESD” Bal
• new entry
• new entry MI: High-Definition Multimedia Interface “HDMI”

• entry deleted | LVDT: Linear Variable Differential Transformer
• entry deleted LVDT”

| entry deleted |MRAM: Magnetic Random Access Memory

• entry deleted “ MRAM” a
• new entry
• new entry IJ : National Institute of Justice ‘NIJ”

| entry deleted SPLD : Simple Programmable Logic Device

• entry deleted “SPLD” कक " Page 26 of 26