DGFT Committee Minutes
;
: ; :
Directorate General of Foreign Trade Udyog Bhawan The DES-V Section 2018-19 Meeting No.23/AM-19 dated 14.02.2919 actually held on 20.02.2019 for the licensing year DGFT to consider the cases under Duty Exemption Schemes (Chapter-4) In Conference Room No, 1] of under the Chairmanship of Shri K.C. Rout, Addl. DGFT, The following officers were present:Name of the representatives and their designation 2). ae [2 Dr. Ram Asrey Lal, Sr. General Manager ee | ShriShri 1D.S.KMohapatra, Git, Vice President DDG cS eae aes |3_T ShriShri NandDinesh Tal,Baid, ConsultantFEDO po ee ; eege : DGFT eaters enumerated below:The agenda for Meeting No, 23/AM-19 dated 14.02.90]9 and the decision taken in respect: of cach case jg MEETING NUMBER ; 23/84-A1.C3/2018 MEETING DATE: 14.02.2019 Case No.:21/22/85Party Name:CREATIVE Meet No/Date:23/84_ Status: ALC3/2014 GARMENTS PVT: LTD. ALC3/2018 Approved 1 HQ File RLA File Lic.No/Date:03107914.02.2019 138 01/85/050/00181/AM15/ 03/94/040/00713/AM15/ 25.11.2014 Decision: Committee considered the case as per agenda along with other relevant Papers and noted. advancthat th e caseauthorization. was transferred by DES-vI Section as the Case pertains to Textile iter, After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned may take necessary action subject to compliance of Case other usual conditions. No.:3/23/84. Party Name:BENLON Meet No/Date:23/84Status: ALC3/2018 INDIA LTD. ALC3/2018 Approved 4 HQ File RLA File Lic.14.02.2019 No/Date:05 10393499 :01/84/050/004] 9/AM19/ 05/23/040/00550/AM15/ 05.03.2015 Decisto rat fy i on: the Committee norms for consider the abov e dadvance the Case authoriz tion as per a genda as along applied with other for. relevant Papers and decided | RA concerned may take Necessary action Subject to compliance of other usual conditions. ALC2/2016Case No.:27/23/80LED:SURGICALParty Name:PETERS INDIA PVT. ALC3/2018Meet No/Date:23/84Status:: Deferred 3 HQ File RLA File Lic.No/Date:0514.02.2019 10400709 Defer Date: 01/80/050/00530/AM17/ :05/24/040/00368/AM | |13.12.2016 18.04.2019 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case Was transferred by DES-] Section as the Case pertains to Textile item and the case has Thebeen case referred stands deferred to DPI forfor their re-listing comments.on 18.04.2019,The committee decided {0 wait for the comments, ARTS 4[ALC3/2017] Case No.:13/10/85Party Name: MANGLAM Meet No/Date:23/84. Status: ALC3/201814.02.2019 Deferred
2
HQ File RLA File Lic. No/Date:1310048805 Defer Date: _ 01/85/050/00134/AM18/ 13/24/040/00042/AM18/ 11.12.2017 18.04.2019 Decision: Committee considered the case as per agenda along with other relevant Papers and noted inputthat thefor casethe produc Was t ransferred, by DES-vI section as the case Pertains to Textile item. After detailed deliberation, Committee decided to ask the firm to appear before NC to explain the requirement of / The case stands deferred for re-listing on 18.04.2019, ALC3/2017Case No.:14/] 0/85HOMEParty Name:AVATAAR FASHION ALC3/2018Meet No/Date:23/84Status: Approved HQ PRIVATE LIMITED 14.02.2019 File RLA File Lic.No/Date:32 10078350 : 01/85/050/00135/AM18/ '32/24/040/00038/AM18/ 26.12.2017 Decision: Committee considered the case as per agenda along with other relevant Papers and noted ratifythat the the case horms was fortransferred the above advanceby DES-VI authorizationsection as theas under: case pertains to Textile item and decided to ee oe ee, 5 fl.S.No. Export Product QuantityExport Import item Quantity allowed ARTiciesBEDDING Ge fee 100 pcr ~ PIGMENT ‘9552.8Sq. Meter CUSHIONS AND | 56717.000 Sq. PRINTING SPUN VARIOUS COVER OF Meter POLYESTER WOVEN SIZE FABRIC | | NO. OF Pcs 34400 50 TO 52 INCH 300D pty | RA | | 10S S/1 Gsm 200 | concerned may take necessary action subject to compliance of other usual conditions.Pees Case No.:2/10/85Party Name: ORIENT |Meat No/Date:23/84Statues ALC3/2017 CRAFT LIMITED ALC3/2018 Approved 6 HQ File RLA File Lic.No/Date:051040528614.02.2019 :01/85/050/00123/AM18) °05/24/040/00508/AM18/ 10.01.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-VI section as the case pertains to Textile item. After detailed deliberation, Committee decided to ratify the norms for the above advance authorization as applied for, RA concerned may take necessary action subject to compliance of other usual conditions. Case No.:1/11/85Party Name:FABRO Meet No/Date:23/84Status: LLP ALC3/2017 LEATHER INDUSTRIES ALC3/2018 Approved r HQ File RLA File Lic.No/Date:14.02.2019 1310048835 °01/85/050/00151/AM18/ :13/24/040/00052/AM18/ 12.01.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that advancethe caseauthorization,was transferred by DES-V] section as the case Pertains to Textile item. After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned may take necessary action subject to compliance of other usual conditions.
2
Case No.:4/2/85Party Name: ORIENT Meet No/Date:23/84. Status: 8 HQALC3/2018File RLACRAFT File LIMITED ‘14.02.2019Lie.No/Date:0510406059ALC3/2018 Approved :01/85/050/0001 3/AM19/ °05/24/040/00002/A M1 9 06.04.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-vI section as the case Pertains to Textile item. After detailed deliberation, Committee decided to ratify the norms for the above advance authorization as applied for, RA concerned may take necessary action subject to compliance of other usual conditions. Case No.:3/2/85Party Name: ORIENT Meet No/Date:23/84. Status: ALC3/2018 CRAFT LIMITED ALC3/2018 Approved 9 HQ File RLA File Lic.14.02.2019 No/Date:0510406083 ra :01/85/050/00012/AM] 9/ :05/24/040/00009/AM19/ 10.04.2018 Decision: Committce Considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-V] section as the case pertains to Textile item. After detailed deliberation, Committee decided to ratify the norms for the above advance authorization as applied for, RA concerned may take necessary action subject to compliance of other usual conditions. CaseALC3/2018 No.:14/11/85VARAHAMURTIParty Name: ALC3/2018Meet No/Date:23/84Status: Approved FLEXIRUB 14.02.2019 INDUSTRIES PVT. LTD. 10 HQ File RLA File Lic.No/Date:05 10406238 °01/85/050/00082/AM19/ :05/24/040/00050/AM19/ 26.04.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-VI section as the case pertains to Textile item, After detailed advance authorization, deliberation, Committee decided to allow net content of imported input + 5% wastage for the above . RA concerned may take necessary action subject to compliance of other usual conditions. Case No.:1/9/85Party Name: ORIENT . Meet No/Date:23/84Status; ALC3/2018 CRAFT LIMITED ALC3/2018 Approved ll HQ File RLA File Lic.No/Date:0514.02.2019 10407155 :01/85/050/00046/AM] 9/ :05/24/040/002 | I/AM19/_— 1.07.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that thethe norms case was for transferr the abov e dadvance by DES-VI authorization section as theas applied case pertains for, to Textile item and decided to ratify RA concerned may take necessary action Subject to compliance of other usual conditions. Case No.:19/11/85Party Name: SARITA Meet No/Date:23/84Status: EID ie? ALC3/2018 HANDA EXPORTS pytT ALC3/2018 Approved HQ File RLA File Lic.No/Date:051040718614.02.2019 :01/85/050/00087/AM| 9/ :05/24/040/00214/AM| 9/ 13.07.2018 A 3 =
Ral0 ant el aiby
Decision: Committee considered the case as per agenda along with other relevant Papers and noted that advancethe case wasauthorization,transferred by DES-vy Section as the Case pertains to Textile item, After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned may take necessary action subject to compliance of other usual conditions, Case No.:28/11/85Party Name: MAXICAN Meet No/Date:23/84Status: ALC3/2018 EXPORT ALC3/2018 Approved 13 AQ File RLA File Lic.14.02.2019No/Date:3210078579 01/85/050/00096/AM19/ 32/24/040/00022/AM19/ 18.07.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that advancethe caseauthorization,was transferred by DES-vy section as the Case pertains to Textile item. After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned May take Necessary action sub Case ject to compliance of other usual conditions. No.:2/11/85Party Name: ORIENT Meet No/Date:23/84‘Status: ea ALC3/2018 CRAFT LIMITED ALC3/2018 Approved 14 HQ File RLA File Lic.14.02.2019No/Date:0510407269 ‘01/85/050/00070/AM19/ 05/24/040/00235/AM19/ 23.07.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-Vv] section as the Case pertains to Textile item, After detailed deliberation, Committee decided to ratify the norms for the above advance authorization as applied for, RA concerned may take Necessary action subject to compliance of other usual conditions. Case No.:3/] 1/85Party Name: ORIENT Meet No/Date:23/84Status: ALC3/2018 CRAFT LIMITED ALC3/2018 Approved 15 HQ File RLA File Lic.No/Date:051040737|14.02.2019 01/85/050/00071/AM19/ :05/24/040/00270/AM | 9/ 31.07.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case was transferred by DES-V] section as the case Pertains to Textile item. After detailed deliberation, Committee decided to ratify the norms for the above advance authorization as applied for, RA concerned may take necessary action subject to compliance of other usual conditions. ‘Case No.:31/] 1/85Party Name: MAXICAN Meet No/Date:23/84Status: ALC3/2018 EXPORT, ALC3/2018 Approved 16 HQ File RLA File Lic.No/Date:32100786014.02.2019 1 01/85/050/00099/A M1 9/ '32/24/040/00027/AM19/ 09.08.2018 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that advancethe caseauthorization,was transferred by DES-VI section as the case pertains to Textile item, After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned may take necessary action subject to compliance ofother usual conditions.
ees
4
Case No.:4/] 1/85Party Name: SARITA Meet No/Date:23/84Status: LID ALC3/2018 HANDA EXPORTS pyr ALC3/2018 Approved 17 HQ File RLA File Lic.No/Date:0514.02.2019 1040756] °91/85/050/00072/AM19/ 05/24/040/00294/A.Mq19/ 20.08.2018 Decision: Committee considered the CaSe as per agenda along with other relevant Papers and noted that theadvancecase authorization,was transferred by DES-vI Section as the Case pertains to Textile item, After detailed deliberation, Committee decided to allow net content of imported input + 5% wastage for the above RA concerned may take Necessary action subject to compliance of other usual conditions. ALC3/2018Case No.:4/1 7/84PACKAGINGSParty Name: SHANKAR ALC3/2018Meet No/Date:23/g4. Status: Deferred HQ LIMITED 14.02.2019 18 File RLA File Lic.No/Date:34] 0044462 Defer Date: 01/84/050/00297/AM19/ '34/24/040/00138/AM19/ 30.08.2018 18.04.2019 comments. Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case has been referred to DPIIT for their comments. The committee decided to wait for the The case stands deferred for re-listing on 18.04.2019, ALC3/2018Case No.:6/] 7/84- P artyACKAGINGS Name: SHANKAR ALC3/2018Meet No/Date:23/84Status: Deferred HQ LIMITED 14.02.2019 19 File RLA File Lic.No/Date:34 ] 0044467 Defer Date: 01/84/050/00299/AM19/ '34/24/040/00166/AM19/ 31.08.2018 18.04.2019 comments, Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case has been referred to DIPp for their comments. The committee decided tO wait for the
The case stands deferred for re-listing on 18.04.2019,
ALC3/2018Case No.:5/] 7/84- P artyACKAGINGS Name: SHANKAR ALC3/2018Meet No/Date:23/84Status: Deferred LIMITED i 20 HQ File RLA File Lic.14.02.2019 No/Date:341004447] Defer Date: 01/84/050/00298/AM19/ 34/24/040/00174/AM19/ 04.09.2018 18.04.2019 comments. Decision: Committee considered the case as per agenda along with other relevant Papers and noted that the case has been referred to DIPP for their comments. The committee decided to wait for the The case stands deferred for re-listing on 18.04.2019,
CaseALC3/2018 No.:2/] 7/84- P artyOLYMERS Name:GOKU PVT L TD ALC3/2018Meet No/Date:23/84_ Status: Deferred 21 HQ File RLA File Lic.No/Date:0514.02.2019 10407959 Defer Date: 01/84/050/00295/A M1 9/ 05/23/040/00261/AM19/ 03.10.2018 18.04.2019 Decision: Committee considered the case as per agenda along with other relevant Papers and decided to ask the firm to furnish the Manufacturing process indicating Stage wise Wastage and Weight of A é.
senricepinemnaninatte S i iai
Export product. : The . case stands deferred for re-listing on 18.04.2019, CaseALC3/2018 No.:3/17/84FOOTWEARSParty Name: WELCOME ALC3/2018Meet No/Date:23/84Status: Deferred » HQ File RLA File Lic.14.02.2019No/Date:05 10407976 Defer Date: :01/84/050/00296/AM19/ £05/24/040/00358/AM19/ 04.10.2018 18.04.2019 toDecision: refer the Committee case to DPITconsidered for their the comments, case as per agenda along with other relevant Papers and decided The case stands deferred for re-listing on 18.04.2019, CaseALC3/2018 No.:10/17/84EXPORTSParty Name: Pvr. AMRIT|TD. ALC3/2018Meet No/Date:23/g4Status: Approved 3 HQ File RLA File Lic.No/Date:021020874614.02.2019 :01/84/050/00303/AM19/ :02/24/040/00102/AM19/ 12.10.2018 to ratifyDecision: the Committee norms for considered the above advancethe case authorization as per agendaas along applied with other for. relevant Papers and decided RA concerned may take necessary action Subject to compliance of other usual conditions. ALC3/2018Case No.:20/17/84EXPORTSParty Name: INDIA KH MeetALC3/2018 No/Date:23/84Status: Approved HQ PRIVATE LIMITED, 14.02.2019 File RLA File Lic.No/Date:04 10164787 :01/84/050/003 13/AM19/ 04/24/040/00158/AM19/ 15.10.2018 Decision: Committee considered the case as per agenda alongwith other relevant Papers and went detailedthrough thebelow: details submitted in this case and decided to ratify the Advance Authorization issued in this Case as per written comments of Deptt. IPP vide their F.O, No. 7/37/2019-TS dated 04.02.2019 as EXPORT MADE ITEM NO. 1:- “PVC ITAND BAGS”See STYLERE ep QTY (IN saecad _Nos) 24 o0u 1,000 1BG253Vi ase 500 IBA104V NWW 300 IBA104V OOW IBA104V 150 OWW A Oe 170 IBAI11V OWW log. __1BAI71V
Se
==> picture [401 x 691] intentionally omitted <==
----- Start of picture text -----<br> Goa ease<br>Oww 110 . iz<br>1BA172V<br>On 305<br>1BA172V<br>1BA173V OOW<br>;<br>IBAI23V es<br>Oww | 500<br>| Om: i ee<br>pseee 100<br>eseosee Item Deseription oevom | _Total Qty<br>eres,Re LEATHER | SoMTR | so<br>| OUTER LINING (FABRIC 100%PA.<br>POLYURETHANE RESIN / FABRIC<br>2<br>100%PA / 100%PL. / NYLON<br>2<br>GABADINE / TES. GAB. NY/ MTR 2043<br>FABRIC 100%CO (LINING<br>3 INNER LINING (FABRIC 100%PA)<br>| PRADA LOGO LINING /NYLon<br>GABADINE =<br>(LINING MATERIALS |}<br>| WIDTH<br>58 INCHES)<br>REINFORCEMENT MATERIAT ee ee<br>| 4 | (ANTISTRAPPO/ TELA ANTIS / NOs Net to Net<br>REINFORCEMENT MaTeRrars) _ |N™<br>REINFORCEMENT MATERIAT<br>5 | (GUTTAPERGA/CANAPINA, sa,<br>KURT/ REINFORCEMENT MTR ae<br>REINFORCEMENT MATERIAL<br>oe6 | @ELT NON ADHESIVE/ sinTEX ae‘ 257<br>REINFORCEMENT MATERIALS) | MIR<br>REINFORCEMENT [MATERIAL] eee<br>7 | (SALPA/TALIN/ BOARDS / oe: 263<br>METAL FITTINGS (WASHER<br>UNDER PLATES/ RIVET / U RING/<br>Seer SCREW /EYELET/ Meta, | NOS Net to Net<br>METAL FITTINGS (PULLER/D<br>”) RING / 0 RING / LOGO / STUD /<br>Mogenerer STICK / METAL NOS Net to Net<br>Pe ‘ b<br>----- End of picture text -----<br>
steeragejue ais
==> picture [428 x 314] intentionally omitted <==
----- Start of picture text -----<br> |<br>10 METAL FITTINGS (DOG HOOK / oo<br>DOG LEASH / BUCKLE / CHAIN<br>| | METAL FITTINGS) / NOS Net to Net<br>Tet eee<br>Sop ZIP FASTNER (ZIP FASTNER) NOSee ceeoe<br>—_}THREADS)SEWING THREADS (SEWING mS _ ____Netto Wo<br>PRIMER (PRIMER DAS550 eo A<br>ae<br>COTTON BAG (PACKING<br>PACKING : ,<br>15 BOX (NON<br>CORRUGATED BOX PACKING NOS As Per Packing Policy<br>MAGNETIC CARD (PACKING .<br>PACKING : :<br> ENVE]OPE (PACKING<br>RA : ;<br>concerned may take necessary action subject to compliance of other usual conditions.<br>Case No.:19/17/84- Party Name:K HH Meet No/Date:23/84- Status:<br>25 ALC3/2018 EXPORTS INDIA ALC3/2018 Approved<br>HQ PRIVATE LIMITED, 14.02.2019<br>File RLA File Lic.No/Date:0410164788<br>:01/84/050/00312/AM 19/ :04/24/040/00149/AM] 9/ 16.10.2018<br>----- End of picture text -----<br>
8
sstitraermmeneligielcnancicumiiiecbeball ee, eee ees
==> picture [458 x 703] intentionally omitted <==
----- Start of picture text -----<br> Decision: Committee considered the ase as per agenda alongwith other relevant Papers and went<br>detailed below:<br>through the details submitted in this case and decided to ratify the Advance Authorization issued in this<br>case as per written comments of Deptt. IPP Vide their F.O. No. 7/37/2019-TS dated 04.02.2019 as<br>EXPORT MADE ITEM NO. 1:- “COW LEATHER HAND BAGS”<br>| 2 ee Realiset eteee COW LEATHER<br>| QTY (In Nos.) ani |HANDBAG41000 <br>S.No. ie<br>Item Description<br>—|| UOM Tota] Qty<br>ee cownnisnepINNER LINING (ASIAN—L FAILLE See- WR + 1X SQFT 58,554<br>or PU COATING WIDTH-56") YARD 22,906<br>INNER LINING (SLG COACH SCATTER > s Ase<br>9 LOGO LNG-TWILL HB WEIGHT<br>“4<br>INNER / 100% MTR 55<br>LINING (COTTON &<br>10 POLY/COTTON JACQUARD FABRIC [ /] 194] =a<br>YD TWOTONE 100% COTTON CANVAS<br>LINING / 4.07CM PLUS PLAID PACKABLE<br>POLY - RESIN / MUSIKA NAPPA EMBOSS MTR 159<br>11 REINFORCEMENT MATERIAL (NON<br>1D WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 4,387<br>REINFORCEMENT MATERIAL (MICRO<br>REINFORCEMENT MTR 168<br> MATERIAL (210D&<br>15 REINFORCEMENT MATERIAL (BONDED<br>LEATHER BOARD 0.3MM, 0.4MM, 0.6MM, MTR 1,715<br>BEMIS Tpu ADHESIVE FILM<br>METAL =<br>21 FITTING (DOG LEASH / METAL<br>se LO CKGO/D / BUCKLE RING / /CMETAL LOGOFITTING) / LETTERS | NOS Net To Net<br>METAL FITTING (D RING / rs ne ea<br>22 RECTANGULAR CONNECTOR / METAL<br>LOGOSLIDER / GROMMET / BUCKLE //METAL ROUND Cap RING / METAL / NOS Net To Net<br>3 METAL FITTING (ZIPPER PULL / METAL<br>METAL NOs Net To Net<br> FITTING BALL CHAIN /D RING /<br>25 METAL FITTING (RIVET) fe<br>_ [26] ZIP FASTENER ise SET _"| Net To Net<br>to MIR<br>oe<br>Je of ee — 12,897<br>----- End of picture text -----<br>
ferme
==> picture [452 x 683] intentionally omitted <==
----- Start of picture text -----<br> 2 pe<br>coat | eos B11; ) eseeSehs [Ne tone 1<br>29 [|][STOPPER] | NetTo Net<br>SNAP [BUTTON] /MAGNETIC BUTTONee SEE} NetTo Ne ae<br>abe<br>ss LEATHER AUXILIARY POLISHES S| -<br>een, Pin wond POLISHES / EDGE STAIN). = +5<br>e PRIMER / POLISHES DAS50 / DAH630 / (a cao eo ae, on<br>€A220 / UA400H (PRIMER)<br>ee<br>34 oak eae:<br>|<br>oe | SILICA GEL (PACKING MATERIAL) NOS De eaee<br>36 PRINTED POLY BAG POLYETHYLENE 1 a _ As per Packing<br>| DUST BAGCOTTON TWILL DUST BAG<br>ROE As per Packing<br>EXPORT MADE ITEM NO, 2:- «pyc HAND BAGS”<br>Suge eae Se ae<br>Export Product Description<br>Mee | HANDBAGS<br>QTY (In Nos)<br>1. 19000<br>|| COW FINISHED LEATHER<br>4 OUTER LINING (120M LIGHTWEIGHTpoe BOP i ae<br>| PVC REPS PEBBLE EMBOSS - POLY/CTN<br>PUTER | MTR 213<br>125MM LINING (12CM PRINTED PVC<br>5 W/TOP COATING -600p CANVAS /<br>| 45.7CMPVC - 600D SLG CANVAS CAMO ORIG PEBBLE EMB MTR 2,553<br>WIDTH-54")<br>pee<br>8 INNER LINING (ASIAN FAILLE- WR} 1X<br>ee<br>| CLEAR PU COATING YARD 8,024<br>ce<br>11 REINFORCEMENT MATERIA, (NON oe<br>earae | WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 1,456<br>ReMM, IMM & 1.5MM WIDTH 56"),<br>pees ad<br>12. | REINFORCEMENT MATERIAI. (MICRO athe eo.= =<br>REINFORCEMENT MATERIA, (FELT ST<br>[NON] [apitesive)]<br>—| [09/10] =<br>REINFORCEMENT MATERIAL,PETS(210D & tiioe ee<br>15 REINFORCEMENT MATERIAL, (BONDED<br>___| | 0.8MM,LEATHERIMM BOARD& 1.5MM) 0.3MM, 0.4MM, We ieemancnr 0.6MM, MTR 542<br>| WEBRING ee<br>1! [.] ee eee<br>MTR<br> ie: eee<br>if<br>10<br>----- End of picture text -----<br>
spereersteestaew a cseteenes
==> picture [429 x 666] intentionally omitted <==
----- Start of picture text -----<br> RECTANGULARMETAL FITTING (D RING/<br>22 CONNECTOR / METAL<br>———| LOGOSLIDER/ GROMMET/ BUCKLE // ROUNDMETAL. CAP RING / /METAL NOS Net to Net<br>MAGNET SNAP/ METAL FITTING)<br>ees<br>23 | METAL FITTING (ZIPPER PULL / META] oS<br>METAL fe hate He<br>= ae EYELET FITTING/ METAL (BALL FITTING) CHAIN /D RING /<br>oe<br>__| ZIP FASTENER<br>Bega SO<br>26 | SLIDER : ae ee sate! eee<br>_27 eee et cee aE<br>28 | STOPPER wees NOS —NettoNet<br>29 | STOPPER<br>| NOS<br>| Net to Net<br>ee<br>31 | LEATHERSNAP BUTTON AUXILIARY/ MAGNETIC POLISHES BUTTON CHM330 ae So he toNet<br>a PRIMER / POLISHES DA550 7 DAH630 / hie 43<br>eee PRIN POLISHES / EDGE STAIN), Neeleyos eee ean<br>«A220 / UA4O0H (PRIMER) aS<br>Bhs Eos hae<br>33| WATER BASED ADHESIVE P5609 AGS = sae fx<br>‘— PRINTED POLY BAG} D<br>34 | SILICA GEL (PACKINGMATERIAL) NOS hes pres,<br>LACKING POLYETHYLENE Oe As per Packing<br>EXPORT MATERIAL)So policy<br> MADE ITEM No, 3:- “COW LEATHER SATCHEL BAG”<br> “sportooQTYProductDeserippendeeses SATCHELCOW LEATHERBAG <br>S.No. (In Nos) a<br>|| | item Description ae vom __ Total Qty<br>4 OUTER LINING (120M LIGHTWEIGHT<br>COWFINisHED LEATHER SQFT JE<br>| PVCNON REPS BRUSH PEBBLE TWILL EMBOSS wip; 1-54")- POLY/CTN MTR 368<br>OUTER LINING (BELT VERTICLE 12¢M pee ee<br>7 "W PVC REPS PEBBLE EMBS -<br>| POLY/CTN NON BRUSH TWILL /SOFTER<br>115MM 10.6CM SIG C LUXE PEBBLE PVC<br>- POLY/CTN NON-BRUSH TWILL WIDTH. ie om<br>8 INNER LINING (ASIAN FAILLE - WR + 1x<br>| CLEAR PU COATING<br>WIDTH-56") . YARD 11,511<br>pe<br>? INNER LINING (SLG COACH SCATTER oe<br>|LOGO LNG-TWILL up WEIGHT / 100% MTR 5,976<br>INNER LINING (COTTON &<br>10 POLY/COTTON JACQUARD FABRIC / 194]<br>| YD TWOTONE 1009, COTTON CANVAS MTR 821<br>| LINING / 4.07CM PLUS PLAID PACKABLE<br>POLY - RESIN / MUSIKA NAPPA EMBOSS<br>| ns er<br>eee<br>----- End of picture text -----<br>
e retaccreeenscinnnlene! ns
==> picture [427 x 680] intentionally omitted <==
----- Start of picture text -----<br> WIDTH 54")<br>|<br>cat<br>Il REINFORCEMENT MATERIA et eee eee ta are ee<br>* |WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 7,910<br>REINFORCEMENT MATERIA, (MICRO<br>REINFORCEMENT ire am<br> MATERIAL 2210 D &<br>15 REINFORCEMENT MATERIAL (BONDED<br>| LEATHER BOARD 03MM, 0.4MM, 0.6MM, MTR 844<br>21 METAL FITTING (DOG LEASH / METAL.<br>———|1L0G0/Dck / BUCKLE RING /METAr. /CLOGO EIING) /LEtiEae NOS Net to Net<br><=<br>METAL FITTING (D RING /<br>22 RECTANGULAR CONNECTOR / MET AI. ee<br>‘-OGOSLIDER / GROMMET/ BUCKLE // ROUNDMETA. CAP RING / /METAL, NOS Net to Net<br>METAL FITTING (ZIPPER PULL / METAL<br>METAL FITTING (BALL. CHAIN /D RING/<br>27__| SLIDER<br>SNAP =e —NOS__[ Net to Net<br> BUTTON / MAGNETIC BUTTON<br>eee (METAL FITTING) ae<br>31 [|][ LEATHER][ AUXILIARY][ POLISHES] Se [ CHM330] pe aaa ae<br>——-—{4CHS330 (POLISHES / EDGE STAIN)<br>a PRIMER / POLISHES DA550 7 DAH630// : reeei<br>eee ce<br>©A220/ UA400H (PRIMER)<br>34 oe ee ge<br>35__| | SILICA GEL (PACKING MATERIAL) NOS enep ing<br>PRINTED POLy BAG POLYETHYLENE<br>:<br>(PACKING [MATERIAL)] Noe As per Packing<br>Policy<br> MADE ITEM No, ITEM No, No, 4:- “PVC SATCHEL BAG” “PVC SATCHEL BAG” SATCHEL BAG” BAG”<br>oe<br>Export Product Description eee 2 ee<br>SATCHEL<br>Ys v #<br>----- End of picture text -----<br>
EXPORT MADE ITEM No, ITEM No, No, 4:- “PVC SATCHEL BAG” “PVC SATCHEL BAG” SATCHEL BAG” BAG”
==> picture [443 x 675] intentionally omitted <==
----- Start of picture text -----<br> S.No. Item Description<br>nS UOM Total Qty<br>| OW FINISHED LEATHER —crenata 805 51; 39,770<br>4 OUTER LINING (12¢M LIGHTWEIGHT sn<br>“2 | NONPVC REPS BRUSH PEBBLETWILL. EMBOSS WIDTH-S4")- POLY/CTN MTR 2,000<br>OUTER LINING (63.690M HAWAIIAN 9<br>6 COLOR SCPT ORIGPEBBPVC ~ 600D ee eee eee<br>CA NVASMO PVC /63.98- 50/50 CM T/C SIG BLEND C WILDBEAST PLAIN MTR 204<br>[INNER LINING (ASIAN FAILLE- WR + 1X<br>8 CLEAR PU COATING<br>INNER YARD 9,252<br>9 LINING (LLG COACH SCATTER<br>|LOGO LNG-TWILL Hp WEIGHT<br>| / 100% MIR 198<br>COTTON Canvas LINING WIDTH-56")<br>oo<br>Il REINFORCEMENT MATERIAL (NON<br>eee<br>12 | WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 4,272<br>| REINFORCEMENT MATERIAL (MICRO<br>REINFORCEMENT Mie ee<br> MATERIAL 210) &<br>15 REINFORCEMENT: MATERIAL (BONDED<br>| LEATHER BOARD 0.3MM, 0.4MM, 0.6MM, MTR 34]<br>2118 VEMETALOPAGEE FITTING Msn (DOG LEASH / METAL.a ie<br>Jock! BUCKLE/CLOGO/ Lettres NOS Net to Net<br>METAL FITTING (D RING /<br>22 RECTANGULAR CONNECTOR / META,<br>LOGOSLIDER / GROMMET/ BUCKLE / / ROUND)METAI. CAP RING / /METAL NOS Net to Net<br>23 | METAL FITTING (ZIPPER PULL / METAL<br>METAL mse eae<br> FITTING (BALL CHAIN /D RING/<br>—26___| ZIP FASTENER<br>a<br>coe<br>Lec [ae] ee 8897<br>eee Net to Net<br>SNAP BUTTON / MAGNETIC BUTTON<br>Belay }METAL FITTING) -<br>“) a oe<br>pie LEATHER AUXILIARY POLISHES CHM330 Vas 7<br>PRI ps POLISHES /EDGE STAT) rsarr<br>ue PRIMER / POLISHES DAS50 DAH630/<br>—33___| W ATERe, B U A MOOHSED ADHESIVE(PRIMER) P56) Seg apes<br>Pe ae ee eae<br>S go<br>----- End of picture text -----<br>
ie stchimccin ge ee
==> picture [436 x 672] intentionally omitted <==
----- Start of picture text -----<br> 34 | SILICA GEL (PACKING MATERIAL) NOS = olon<br>35 _| PRINTED POLY BAG POLYETHYLENE<br>(PACKING [MATERIAL)] ae. As per Packing<br>EXPORT Policy<br>|MADE ITEM NO. 5:- “COW LEATHER EXECUTIVEBAG”<br>———_QTY<br>Export Product Description | cow PTR EXECUTIVE<br>S.No. (In Nos) — Nani nk wa eetigei... eee<br>|| Item Description UOM Total Qty<br>8 INNERCOW FINISHED LINING (ASIANLEATHER FAILLE WRa1X ee<br>| CLEAR PU COATING YARD 2,318<br>9 INNER LINING (SLG COACH SCATTER<br>a | LOGO LNG-TWILL BB WEIGHT, 100% MTR 1,641<br>COTTON CANVAS LINING WIDTH-56"<br>REINFORCEMENT es<br>28MM,11 | WOVEN LINING (0.3MM,0 MATERIAL 4MM (NON 0.6MM, YARD 1,799<br>12 IMM de 15MM wip Ser) |<br>| REINFORCEMENT MATERIAL (MICRO<br>TT TRERRSGEENON ee S<br>WOVEN WopTasay [MTR<br>'S_4 [20DREINFORCEMENT MATERIALREINFORCEMENT NyLon MATERIAL (BONDED(210 D & eae eeeee<br>aah| LEATHER BOARD 03MM, 0.4MM, 0.6MM, MTR 384<br>0.8MM, 1MM & 1.5MM) eee<br>1?21 | WwesenGMETAL FITTING (DOG LEASH/ METALCsoo) Ge‘ ee ee<br>| LOCK / BUCKLE /C LOGO/ LETTERS NOs Net to Net<br>METAL FITTING (D RING /<br>22 RECTANGULAR CONNECTOR / METAL<br>| SLIDERLOGO / GROMMET / BUCKLE / /METAL ROUND CAP RING / METAL / Nos Net to Net<br>—| MAGNET SNAP<br>/ METAL FITTING)<br>aac<br>METAL FITTING (ZIPPER PULL / METAL ee<br>| METAL FITTING (BALL CHAIN/D RING)<br>mi EYELET / METAL FITTING eeeeo ee<br>Sei26 | ZIPMETAL FASTENER FITTING (RIVET) eeeee ee1 eee Net to Net<br>[SLIDER]<br>feet [Wee] | ae MR cibeesk Stee<br>38 [pa] [5)] ne Oe —__NettoNet _<br>ae STOPPER<br>SEES ane aeeNOS Net to Net<br>SNAP BUTTON [/] MAGNETIC BUTTONenna Mian)! aie Netto Net _<br>| =<br>/CHS330 (POLISHES<br>iy 31 | LEATHER AUXILIARY/ POLIEDGE S TAIN)HES CliM339 ee ss<br>S : Ke eS es<br>----- End of picture text -----<br>
SAeg yc
==> picture [434 x 685] intentionally omitted <==
----- Start of picture text -----<br> PRIMER / POLISHES DAS5S0 / DAH630 / 2<br>34 SILICA GEL (PACKING MATERIAL) NOS = etae<br>35 PRINTED POLY BAG POLYETHY] “ENE<br>EXPORT NOS AS per Packing<br> MADE ITEM NO. 6:- “PVC EXECUTIVE BAG”<br>Export ey PVE<br>Product Description EXECUTIVE<br>QTY (In Nos) 2500 — ee<br>S.No. Item Description UOM Total Qty<br>—1__| COW FINISHED LEATHER a OO oes<br>4 OUTER LINING (12CM LIGHTWEIGHT PVC<br>pies ae REPS PEBBLE EMBOSS - POLY/CTN NON MTR 425<br>BRUSH TWILL WIDTH-54")<br>Ses = Se a ee pe, Su<br>8 INNER LINING (ASIAN FAILLE - WR + 1X<br>CLEAR PU COATING YARD 1,671<br>11 REINFORCEMENT MATERIAL (NON<br>WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 847<br>REINFORCEMENT MATERIAL (210D & 420<br>15 REINFORCEMENT MATERIAL (BONDED<br>LEATHER BOARD 0.3MM, 0.4MM, 0.6MM, MTR 95<br>Zl METAL FITTING (DOG LEASH / METAL |<br>LOCK / BUCKLE/ CIOGO / LETTERS | NOS Net to Net<br>METAL FITTING (D RING /<br>22 RECTANGULAR CONNECTOR / METAL<br>SLIDER / BUCKLE / METAL CAP / METAL NOS Net to Net<br>= LOGO / GROMMET / ROUND RING vf |<br>sh MAGNET SNAP / METAL FITTING)<br>METAL [FITTING] [(ZIPPER][ PULL] [/][ METAL] i | aca ets Ney eat ge<br>METAL FITTING (BALL CHAIN /D RING /<br>ae SNAP BUTTON / MAGNETIC BUTTON<br>=<br>__ | (METAL FITTING) me<br>3] LEATHER AUXILIARY POLISHES CHM330 oS ae Ae het ae<br>2<br>= ___| /CHS330 (POLISHES / EDGE STAIN) Bee igs KGS 375<br>oso Sree ed<br>PRIMER / POLISHES DASSO / DAH630 /<br>ae ae :<br>CA220 / UA400H (PRIMER) : a<br>35 ee ules ate ete se<br>PRINTED POLY BAG POLYET] TYLENE NOS As per Packing<br>(PACKING MATERIAL) i<br>1 -<br>, ew _Policy Zee<br>----- End of picture text -----<br>
ee te
|EXPORTMADEITEMNO. 7:-«COWLEATHERLAPTOPBAG”|
|---|
||<br>Export ProductJieription<br>| eene<br>ae<br>QTY (In Nos)<br>|<br>Sse<br>i Ae Ss ts|
|S.No.<br>|ItemDescription<br>UOM<br>TotalQty<br>|__| COW FINISHED LEATHER ve<br>SOFT<br>Gersa<br>OUTERLINING (CROSSGRAIN(TIPPED)<br><<br>EMBOSSEDPVC -POLY/CTNNON-BRUSH<br>wire<br>ay<br>TWILL<br>pa I<br>oe<br>ee<br>ee<br>se<br>INNERLINING(ASIANFAILLE-WRi1X<br>8<br>CLEARPUCOATING<br>YARD<br>9,715|
|INNERLINING(COTTON&POLY/COTTON<br>JACQUARDFABRIC / 1941 ypTWOTONE<br>10<br>100%COTTON CANVASLINING/4.07CM<br>MTR<br>65<br>PLUSPLAIDPACKABLEPOLY -RESIN /<br>seaeMUSIKANAPPA E**M**BOSSWIDTHoatEas eee naseek Je)<br>REINFORCEMENT ATERIAL(NON<br>11<br>WOVENLINING(0.3MM,0.4MM. 0.6MM,<br>YARD<br>3,732<br>el<br>| 0.8MM,IMM& 1.5MM WIDTH 56")<br>:<br>ee<br>ens ne eae<br>iesSeciieeuedMATERIAL(210D&420<br>wae<br>—<br>REINFORCEMENTMATERIAL(BONDED<br>epee<br>15<br>LEATHERBOARD0.3MM, 0.4MM, 0.6MM,<br>MTR<br>612<br>| 0.8MM,IMM&1.5MM)<br>ee<br>ees<br>METALFITTING(DOGLEASH /METAL<br>21<br>LOCK/BUCKLE/CLOGO/LETTERS<br>NOS<br>NettoNet<br>__| LOGOLD RING/METAL FITTING) __as<br>;<br>METALFITTING(DRINGRECTANGULAR|<br>| CONNECTOR/METALSLIDER /BUCKLE /<br>22<br>METALCAP/METAL LOGO/GROMMET /<br>NOS<br>NettoNet<br>| ROUNDRING /MAGNETSNAP /METAL|
|METALFITTING ZIPPERPULL /METAL|
|METALFITTING (BALLCHAIN/p RING/<br>ney<br>EYELET / METALFITTING<br>eaeeeBat:<br>26<br>__|<br>ZIPFASTENER<br>MIR«| 7250_<br>27<br>SLIDER<br>NOS | Net toNet.|
|SNAPBUTTON<br>/ MAGNETIC BUTTON<br>,<br>°0<br>|qverarCLUES)<br>LG gees Ge<br>NottoNat<br>‘i<br>LEATHERAUXILIARYPOLISHESCHM330 /<br>—<br>193<br>ce<br>_|<br>CHS8330 (POLISHES / EDGESTAIN)<br>ee see<br>PRIMER /POLISHESDA5S0/DAH630 /<br>ed<br>a8<br>-CA**2**0<br>/ UA400H (PRIMER)<br>s<br>ausee pea ie<br>Biers<br>aoe |WATER BASED ADHESIVEela<br>34<br>|SILICAGer(PACKINGMATERIAL)<br>|<br>~NOS<br>| Asper —<br>Daal<br>r<br>va|
aieerenpeeeicielt Ca e e
==> picture [427 x 671] intentionally omitted <==
----- Start of picture text -----<br> nn: eee<br>eee Oee me cum Packing<br>- apes edPaligy<br>(PACKINGPRINTED POLY MATERIAL) BAG POLYETHYLENE iss il<br>EXPORT MADE ITEM NO. 8:-“PVC LAPTOP BAG? —- Pats [8]<br>| Export Product Description PVC LAPTOP BAG<br>_____QTY (In Nos) Sets 8 8<br>eaeS.No. COWItem Description FINISHED LEATHER ee UOM Total Qty<br>4 OUTER LINING (12CM LIGHTWEIGHToe Pvc 10,184<br>REPS PEBBLE EMBOSS - POLY/CTN NON MTR 795<br>8 INNER LINING (ASIAN FAILLE WR + 1X<br>TeCLEAR PU COATING YARD 2,331<br>INNER LINING (COTTON &eae POLY/COTTON<br>10 JACQUARD FABRIC / 194] yp TWOTONE<br>100% COTTON CANVAS LINING / 4.07CM MTR 15<br>PLUS PLAID PACKABLE POLY - RESIN /<br>______| MUSIKA NAPPA EMBOSS WIDTH 54") ee<br>11 REINFORCEMENT MATERIAL (NON as<br>WOVEN LINING (0.3MM,0.4MM, 0.6MM, YARD 895<br>REINFORCEMENT MATERIAL (210 D & 420<br>15 REINFORCEMENT MATERIAL (BONDED<br>LEATHER BOARD 0.3MM. 0.4MM, 0.6MM, MTR 147<br>————|.0.8MM,IMM & 1.5MM)<br>Tie<br>21 METAL FITTING (DOG LEASH / METAL Co ee<br>LOCK / BUCKLE /C LOGO / LETTERS NOS Net to Net<br>METAL FITTING (D RING / RECTANGULAR<br>22 CONNECTOR / METAL SLIDER / BUCKLE /<br>METAL CAp / METAL LOGO / GROMMET / NOS Net to Net<br>ROUND RING / MAGNET SNAP / METAL<br>| FING)<br>one<br>- er aes diene oes Be<br>METAL FITTING (ZIPPER PULL / META[, — Not ea We<br>METAL FITTING (BALL CHAIN/D RING /<br>eels EYELET / METAL FITTING) :<br>Re Net to Net<br>__28 | STOPPER<br>29|STOSNA P PERBUTTONiio / MAGNETIC BUTTON NOS __NetNettoto NetNet || |<br>es<br>Pe WATER BASED ADHESIVE P560<br>or, e e nes Se Ee<br>34 SILICA GEL (PACKING MATERIAL) NOS AS Pet<br>Ce : Pacing<br>ae<br>----- End of picture text -----<br>
patielienatibanetieeinsnines hina Gee
==> picture [445 x 679] intentionally omitted <==
----- Start of picture text -----<br> eae he El eee a Gea<br>= ee a ee<br>PRINTED POLY BAG POLYET} TYLENE<br>(PACKING a Pig<br>EXPORT MATERIAL) Policy.<br>MADE ITEM NO, 9:- “COW LEATHER BELTS» ee<br>Joie re ooops | COW LEATHER”<br>L J RUON Frattage Seeniysonee<br>8N6. ——_BEY (a Nep f160000<br>[tet Dente ee | Total Qty<br>11 REINFORCEMENT MATERIAL (NON<br>Cpe WOVEN LINING (0.3MM,0.4MM, 0.6MM. YARD 2,517<br>28MM, 1MM & 1.SMM WIDTH 56")<br>16 REINFORCEMENT MATERIAL, (1.5MM ee as iol ae<br>—_____| CHAMARBONDED LEATHER CHARME) BOARDae SQMTR 10,280<br>— ee Se ee<br>9 _| BEMIS TPU ADHESIVE FILMa Mig Tega<br>aes BUCKLES (BUCKLES METAL FITTINGS) __ NOS: Net to Net<br>Le LEATHER AUXILIARY POLISHES CHM330 /<br>-CHS330 (POLISHES / EDGE STAIN) es<br>Vigne PRIMER / POLISHES DA550 / DAH630 / BS eid oe<br>©A220 / UA400H (PRIMER)<br>eS —<br>= re:<br>34 As per<br>pS aeeeSILICA GEL (PACKING MATERIAL) NOS Packing<br>as PRINTED POLY BAG POLYETHYLENESee erie tes ke Policy<br>(PACKING hie bt a<br>= MATERIAL) — : ng<br>a DUST BAGCOTTON TWILL DUST BAG | Policy<br>(PACKING NOS elt<br> MATERIAL) : ne<br>PACKING5 Spee GIFT BOX NON CORRUGATED<br>i = ae hGs As per<br>(PACKING 2 = Moe<br>ptt PACKING MATERIAL) aa = Pollyeee<br>38 INSERT BOX (PACKING AS per<br>Sr<br>aes [sat] MATERIAL) NOS Packing<br>EXPORT ee i<br>MADE ITEM NO. 10:- “COW LEATHER BELTS”<br>Vente _ Se<br>pe backs COW LEATHER BELTS<br>ee COMBINATION WITH pvc<br>[ QTY (In Nos) 67000 2<br>-—1|S.No. ItemCOW DescriptionFINISHED LEATHERSeeoe ion 5 Fond Qty<br>aon PEBBLEOUTER LINING EMBOSS (10.6CM NO SCRIP-50/50 SIG/ SIG C TCSte LUXE BLEND Se<br>=<br>ee WEAVE MTR 297<br>SE 18<br>----- End of picture text -----<br>
==> picture [452 x 680] intentionally omitted <==
----- Start of picture text -----<br> 4 OUTER LINING (12CM IAGHTWEIGHT PVC<br>REPS PEBBLE EMBOSS - POLY/CTN NON MTR 2,466<br>OUTER LINING (12CM PRINTED PVC 1.25MM<br>5 W/TOP COATING -600D CANVAS / 45.7CM SLG<br>CAMO ORIG PEBBLE EMB PVC - 600D CANVAS MTR 137<br>OUTER LINING (BELT VERTICLE 12CM LW<br>7 PVC REPS PEBBLE EMBSS - POLY/CTN NON<br>BRUSH TWILL /SOFTER 1.15MM 10.6CM SIG C MTR 1,264<br>LUXE PEBBLE PVC - POLY/CTN NON-BRUSH<br>16 REINFORCEMENT MATERIAL (1.5MM BONDED<br>LEATHER BOARD SQMTR 4,43]<br>55} BEMIS TPU ADHESIVE FILM (ADHESIVES)<br>| ea OC<br>31 LEATHER AUXILIARY POLISHES CHM330 /<br>PRIMER KGS 698<br>/ POLISHES DAS550 / DAH630 / CA220/ .<br>re3534 PRINTEDSILICA GEL POLY(PACKING BAG POLYETHYLENE MATERIAL) SeesNOS ee PackingPolicyAs per<br>Nos As per Packing<br>36 DUST BAGCOTTON TWILL DUST BAG<br>Nos As per Packing<br>37 PACKING GIFT BOX NON CORRUGATED<br>__—_| (PACKING MATERIAL) NOS As per Packing<br>38 eee en oeee<br>RA | PACKING INSERT BOX (PACKING MATERIAL) NOS Aa oyeat<br>concerned may take necessary action subject to compliance of other usual conditions.<br>Case No.:16/17/84- Party Name: GALAXY Meet No/Date:23/84- Status: Reject<br>ALC3/2018 ELEGANT FASHIONS ALC3/2018<br>HQ PRIVATE LIMITED 14.02.2019<br>File RLA File Lic.No/Date:0510408188<br>26 :01/84/050/00309/AM19/ :05/23/040/003 14/AM19/ 23.10.2018<br>Decision: Committee considered the case as per agenda along with other relevant papers and noted that<br>the case was rejected by NC in its meeting No.22/84 dated 31.01 .2019 (Case No:16/17/84-ALC3/2018)<br>as the firm was asked on 02.02.2019 to appear before NC on 20.02.2019 to explain their case<br>alongwithbefore NC. CADCommitteeand sampledecidedof theto rejectproduct.the case.No Tepresentative on behalf of the firm had appeared<br>RA concerned may take necessary action subject to compliance of other usual conditions<br>ALC3/2018<br>Case No.:1/20/84- Party Name: JAYANITA Meet No/Date:23/84- Status: Approved<br>7 ALC3/2018<br>HQ 14.02.2019<br>File RLA File Lic.No/Date:0510408718<br>:01/84/050/00363/AM19/ :05/23/040/00373/AM19/ 30.11.2018<br>a oe<br>----- End of picture text -----<br>
acmea et oe
Decision : Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case and observed that firm’s representative had appeared before theNC norms on 20.02.2019 for the above advance and explained authorization their case. asAfter applied detailedfor. deliberation, Committee decided to ratify RA concerned may take necessary action subject to compliance of other usual conditions. ALC3/2018Case No.:8/20/84NONWOVENSParty Name: KTEX ALC3/2018Meet No/Date:23/84Status: Deferred 28 PRIVATE LIMITED 14.02.2019 HQ File RLA File Lic.No/Date:24 10042585 Defer Date: °01/84/050/00370/AM19/ '24/24/040/00038/AM19/ 30.11.2018 18.04.2019 Decision:to refer the Committee case to DPITconsidered for their the comments, case as per agenda along with other relevant Papers and decided The case stands deferred for re-listing on 18.04.2019. Case No.:4/23/84Party Name: KOHINOOR Meet No/Date:23/84‘Status: te ALC3/2018 ROPES Pvr. LTD. ALC3/2018 Approved 29 HQ File RLA File Lic.No/Date:0314.02.2019 10825512 :01/84/050/00420/AM19/ :03/94/040/00513/AM19/ 07.12.2018 to ratifyDecision: theCommittee norms for considered the above advancethe case authorization as per agendaas along applied with for. other relevant Papers and decided RA concerned may take necessary action subject to compliance of other usual conditions. ALC3/2018Case No.:6/23/84- P artyACKAGINGS Name: SHANKAR LIMITED ALC3/2018Meet No/Date:23/84_ Status: Deferred 30 HQ File RLA File Lic.No/Date:3414.02.2019 10044764 Defer Date: :01/84/050/00422/AM] 9/ 34/24/040/00282/AM19/ 17.12.2018 18.04.2019 comments,Decision: Committee considered the case as per agenda along with other relevant Papers and noted that case has been referred to DPIUT for their comments. Committee decided to wait for their The case stands deferred for re-listing on 18.04.2019.
ALC3/2018Case No.:7/23/84PACKAGINGSParty Name: SHANKAR LIMITED ALC3/2018Meet No/Date:23/84Status: Deferred 3] HQ File RLA File Lic.No/Date:3414.02.2019 10044763 Defer Date: °01/84/050/00423/AM19/ '34/24/040/00278/AM19/ 17.12.2018 18.04.2019 Decision: Committee considered the case as per agenda along with other relevant Papers and noted that TheCase case stands defe red has been refer r ed tofor DPIIT re-listing for their on comments.18.04.2019. Committee decided to wait for their comments. 32 ALC3/2018Case No.:2/23/84PACKAGINGSParty Name: SHANKAR LIMITED ALC3/2018Meet No/Date:23/84Status: Deferred HQ File RLA File Lic.No/Date:3414.02.2019 10044769 Defer Date: 01/84/050/00418/AM19/ 34/24/040/00281/AM19/ 18.12.2018 18.04.2019 eae 2 eo
Onan ert a
Decision: Committee considered the case as per agenda along with other relevant papers and noted that Thecase has case beenstands deferredreferred tofor DPIIT re-listing for their on comments.18.04.2019. Committee decided to wait for their comments.
Case No.:5/23/84Party Name: SHANKAR Meet No/Date:23/84Status: Deferred ALC3/2018 PACKAGINGS LIMITED ALC3/20] 8 14.02.2019 33 HQ File RLA File Lic.No/Date:34 10044767 Defer Date: :01/84/050/00421/AM19/ :34/24/040/00280/AM19/ 18.12.2018 18.04.2019 Decision: Committee considered the case as per agenda along with other relevant papers and noted that Thecase case has beenstands referred to DPIITdeferred for re-listing for their on comments.18.04.2019. Committee decided to wait for their comments. Case No.:1/23/84Party Name: Meet No/Date:23/84Status: ALC3/2018 CONNOISSEUR ALC3/2018 Approved FASHIONS 14.02.2019 34 HQ File RLA File Lic. No/Date:04 10165038 :01/84/050/00417/AM19/ :04/24/040/00212/AM19/ 27.12.2018 Decision: Committee considered the case as per agenda along with other relevant papers and decided to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance of other usual conditions. Case No.:8/23/84Party Name: SAWAN Meet No/Date:23/84Status: Hy ALC3/2018 INDIA OVERSEAS ALC3/2018 Approved 14.02.2019 35 HQ File RLA File Lic.No/Date:3010104562 :01/84/050/00424/AM19/ :30/24/040/00047/AM19/ 16.01.2019 Decision: Committee considered the case as per agenda along with other relevant papers and decided to ratify the norms for the above advance authorization as applied for. RA concerned may take necessary action subject to compliance of other usual conditions. In Minutes of manual cases considered by the Norms Committee -V ee | Meeting No.23/84 AM-19 dated 14.02.2019 actually held on 20.02.2019 Case en rey Be og NC No. 309 M/s Mecord India Ltd Meeting No. 23AM19 dated | F.No, 01/84/171/00024/AM18/DES.vV Fixation of SION for export product ‘Dipped Nylon monofilament fabrics’ Se ie[t] Decision: Committce considered the case as per agenda alongwith other relevant papers and noted that firm has requested for fixation of SION for export product ‘Dipped Nylon monofilament fabrics made out of N6/N66 monofilament yarn of 322 Denier (0.20mm dia to 724 Denier (0.30mm dia). RA.After detailed——_ —deliberation, —Committee~ a decided to= advice the firm is to apply———$—for adhoc norms rts Case No. 310 M/s Shital Fibres Ltd., ‘NC Meeting No. 23AMi9 dated F.No. 01/84/050/00029/AM12/DES.V a = ps
==> picture [29 x 17] intentionally omitted <==
----- Start of picture text -----<br> TE<br>----- End of picture text -----<br>
nn SN SSW See eee ne
Request for modification in term of export obligation imposed against the following Adv. licenes: | eeC 3010043132Crete dt. 29.07.2005 | 2. | 3010045201 dt | 3. 3010046474 dt 20.03.2006 : | 16.12.2005 | i aay ain | 4. 3010049089 dt. 14.09.2006 | 5. 3010056476 dt. | 6. 3010073672 dt. 18.03.2011 7. Sie3010073869 keedt.25.03.2011aoe |g os3010091497 | Sue oe Decision: dt.29.01.2013 through Committee considered the case as Per agenda alongwith other relevant papers and went their the details submitted in this case and decided to ask the firm to appear before NC to explain The case alongwith Supportive documents. case stands deferred for re-listing onee 38 ie Sr be eee 5 a Meeting No. 23AM19 dated | F.No. 01/84/171/00060/AM19/DES_v 14.02.2019 | . ae Bp Baa | underPrior fixationpara 4.04(a)of adhoc1 FTP norms 2015-20:for the following €xport products under special advance licence scheme Eg: pees ee ee eees 1. | Mens Shirt(Full Sleeve) made of 97% Cotton 3% Elastane(Spandex) Dyed Woven Fabric GSM | 201(Tolerance +/-10%, (Style No. 103870). 2. | Ladies Trouser made of 98% Cotton 2% Elastane(Spandex) Dyed Woven Fabric GSM 285(Tolerance +/-10%, (Style No. 102080). 3. | Ladies Trouser made of 98% Cotton 2% Elastane(Spandex) Dyed Woven Fabric GSM 285(Tolerance +/-10%, (Style No. 102213). Decision: M/s Shahi Exports Pvt. Ltd. vide their letter dated 08.02.2019 has requested for fixation of | norms for above said export product under Special Advance Authorisation. Committee considered the | case as per agenda alongwith other relevant papers and went through the details submitted in this case. As per CAD and other details provided in this case, the Committee approved the input Output norms as the norms again. |[and compliance of] applied for. The copy of[ other][ usual] the application[conditions.] is[ There] forwarded[is][ no] to[ need] the[ to] concerned[ send][ the][ case] RA for[ to][ DGFT] further[ (HQ)] necessary[for fixation] action GSM should match in import and export. ae 39 Se : se) ee Case No3i2 ee| M/s. Shahi Exports Pvt. Ltd. Sie aia iat een Pe ee ge “NC Meeting No. 23AM19 dated F.No. 01/84/171/00063/AM] 9/DES-V under Prior fixationpara 4.04(a)of adhoc1 FTP norms2015-20:for the following export products under special advance licence scheme : Se ee 1. | Mens Polo Shirt made of 70% Modal 30% Polyester Dyed Knitted Fabric GSM 200 (Tolerance + or —~ 10%, (Style No. D3966826) 2. | Ladies Jacket with Hood made of 100% Polyester PU Coated Dyed Woven Fabric GSM 68 (Tolerance + or — 10%), (Style No. 344J2136) Decision: M/s Shahi Exports Pvt. Ltd. vide their letter dated 15.02.2019 has requested for fixation of norms for above said export product under Special Advance Authorisation, Committee considered the case as per agenda alongwith other relevant papers and went through the details submitted in this case. |[applied] As per CAD[for.] andThe othercopy of details the application provided inis thisforwarded case, the Committec approved the input output norms as to the concerned A RA for further necessary action He B
‘Eeeee ae
| and compliance ofthe norms again. other usual conditions. There is no need to send the case to DGFT (HQ) for fixation _GSM should match ercepe ieee,
ge! aes
14.02.2019NC Meeting No. 23AM19: dated wakes F.No. 01/84/171/00064/AM19/DES-v: recy el Prior fixation of adhoc norms for the following export products under special advance licence scheme I. | Ladies(Style No.Trouser942585) made of 55% Linen 45% Cotton Yarn Dyed Woven Fabric GSM 140 (+/-10%), 2. (StyleLadiesNo.Trouser942750)made of 55% Linen 45% Cotton Yarn Dyed Woven Fabric GSM 140 (+/-10%), Decision: M/s Afflatus International vide their letter dated 18.02.2019 has requested for fixation of | norms for above said export product under Special Advance Authorisation. Committee considered the ©aSC as per agenda alongwith other relevant papers and went through the details submitted in this case. As per CAD and other details provided in this case, the Committee approved the input output norms as applied for. The copy of the application is forwarded to the concerned RA for further necessary action theand compliance norms again. of other usual conditions. There is no need to send the case to DGFT (HQ) for fixation GSM should match in import and CEO ere eee en st SS
23
nn
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis has been generated for this document yet.