DGFT Committee Minutes

y, सं-ई P-47011/156/2019 टी. A eels esky, भारत सरकार वाणिqज्य और उद्योग मंत्रालय उद्योग सवर्ध}न और आंतरि€क व्यापार वि„भाग टी. एस. अनुभाग Subject;- Revision of SION H-68, H-301 & H-302 of Export Products- Double Decorative/ Single side Laminates with or without Barrier Paper- Merino Industries Ltd., M/s. Merino Panel Product Ltd., and Greenlam Industries Ltd., Kolkata. M/s. Merino India Ltd. have made an application for amendment in SIONs H301 & H-302 for the export of single side decorative laminate with / without barrier paper and M/s Greenlam Industries Ltd, Kolkata has also requested for amendment in SIONs H302 & H68 (Double Decorative Laminates with Barrier Paper ) as under: 1. SION H301 for the export of single side decorative laminates with barrier paper: Amendment | Existing Amendment | Justification given by the firm requested Description requested for Import for S. No. Al Kraft paper | Kraft paper | At present, all overseas suppliers are (60gsm-205 gsm) (60 gsm

• | manufacturing and supplying the Kraft paper 350 gsm) from 200 GSM to 350 GSM only. Only few overseas manufacturers are supplying kraft paper below 205 GSM but a very high price”. Indian Laminate manufacturers are not able to import the Kraft paper due to restrictions of GSM imposed in above stated SIONs. The input is allowed in kg. term in both these SIONs, hence the variation/increase in GSM will not supersede the intentions/motive of the SION at all.

SION H302 for the export of single side decorative laminates without barrier paper: Amendment | Existing Description Amendment Justification requested requested for for Import S. No. No. 1 Kraft paper Kraft paper Same as above 60 gsm-205 gsm 60 gsm - 350 gsm Note 4 The above norms are applicable | The above norms are | In view of growing only in case of decorative | applicable only in| international demand laminates having thickness range | case of decorative | of different thickness between 0.5 mm to 1.5 mm. laminates having | ranging from 0.4 mm thickness range |to 3 mm_it_is

M725 -/26 WO) Nv - 3/८ 9५ / $/ 20 9 707371 ४ between 0.4 mm to 3 mm. requested / fo modify/change thickness range of export product under SION H302 3. SION H68 for the export of double side decorative laminates with barrier paper: Amendment Existing Description Amendment Justification requested for requested for Import S. No. Note 1 The above norms. are} The above norms are | In view of growing kg+/- thickness. based on 10mm thickness with average weight of 14.5 2.5% applicable on 2.5 to 20 mm and are based 10mm thickness with average weight of 14.5 kgt/- 2.5% and are applicable on 2 mm to 30 mm thickness. on international demand of different thickness ranging from 2 to 30 mm it is requested to modify/change thickness range of export product under SION H68 In this regard, The Plastic Export Promotion Council has also recommended for amendment of above SIONs and attached individual exporters request M/s. Century Plyboards (India) Ltd., Kolkata; M/s. Merino Industries Ltd. Kolkata; M/s. Merino Panel Products Ltd., Kolkata; Indian Laminates Manufacturer's Association, Anmedabad & M/s. Greenlam Industries Ltd., Kolkata. The request of the firms is only for amendment in GSM of import item Kraft paper and increase of thickness range of export item, without changing the quantity etc. DPIIT, therefore, have no objection for amendment of above SIONs as requested for. Accordingly, revised norms may be as under: Single Side Decorative Laminates with barrier paper 1 sq meter x है Kraft paper (60 gsm - 350 |0.937 kg 1mm gsm) Thickness of Wt. 1.45 Kg +/-2.5% 2 Base Paper (50 gsm- 150 ||0.107 kg gsm) 3 Barrier Paper (50 gsm - 120 ||0.086 kg gsm) |] Tissue Paper (20 gsm- 38 ॥0.030 kg gsm) Phi F [ || | 5 [_] I enol (0.361 kg Malamine | i ; [6 | 6 [| 0.181 kg 7 Paraformaldehyde (91 +/- (0.300 kg 1% Purity)

N95 126 77// 3/0 / /2/9//9 a 9 आई रि€ च चत | चर फत | [ | I 7 [ __|[Methanot (0.398 Kg | [sd 8 | |] B.O.P-P. Film 0.010 kg ॥ Note:1. The above norm has been worked out on the 1.00 mm thickness with average wt. of 1.45 Kg +/- 2.5% 2. In Case of variation in thickness/weight, the quantity of item of import viz. Phenol, Para Formaldehyde/Methanol and Kraft Paper to be allowed may be arrived by adopting the following formula: AXB/ C Where A=Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/-2.5%. B= The thickness or wt/sq. meter of decorative laminates proposed to be exported. C=Either the Standard thickness of 1.00 mm or the Standard wt. of 1.45 Kg/sq. meter of 1.00 mm thickness. 3.The quantity of items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP Film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. 4. The above norms are applicable only in case of Decorative Laminates having thickness range between 0.5 mm and 1.5 mm thickness. ह Single Side Decorative |1 sq mtr x 1 1 Kraft paper (60 gsm - 350. ||1.033 Kg Laminates without mm gsm) Barrier Paper Thickness of wt. 1.45 Kg +/-2.5% 2 Base Paper (50 gsm-150 ||0.133 kg gsm) 3 Tissue Paper (20 gsm- 38 ||0.033 kg gsm) [sd ॥ 4 [| Phenot | (0.457 kg | [ | | 5 [ |] Melamine | (0.133 kg ] | | Paraformaldehyde (91+/-1% ||0.300 kg Purity) OR | | [6 |] 6 [| Methanol (0.398 Kg | [ || l 7 [ B.O.P.P. Film (0.011 kg a ee The above norms has been worked out on the 1.00 mm thickness with average wt. of 1.45 Kg +/-2.5% Kraft paper and Titanium Dioxide to be allowed may be arrived by adopting Formula: IAxB/C Where 2. In case of variation in thickness/weight,the quantity of item of import viz. Phenol, Paraformaldehyde,

नम हल हर 7)///० 2/&-र्ट}2 M) -/65-/7४ Ce Hie A= Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/2.5%. B= The thickness or wt/sq. meter of decorative laminates proposed to be exported. C=Either the Standard thickness of 1.00 mm or the Standard wt.of 1.45 Kg/sq. meter of 1.00 mm thickness. 3.The quantity of BOPP film given above will be for one sq. meter of Decorative Laminates irrespective of thickness and weight of decorative laminates to be exported. 4. The quantity of all the other items unchanged irrespective of change of thickness and weight of decorative laminates to be exported. 5. It is clarified that the above formula is applicable only incase of Decorative Laminates having thickness range between 0.4 mm and 3 mm. Double Side 1 Sq.Mtr x | Kraft Paper 9.15 kg Decorative Laminates ||10.00 mm with Barrier Paper thickness of 14.5 kg +/- 2.5% [ | | 2 ] Base Paper (0.214 kg | [ss ॥ 3 [ Barrier Paper 0.172 kg [i [4 |] 4 [_] Tissue Paper 0.027 kg [i I 5 [| Phenol 3.52 kg _] [sd [०] 6 [__] Melamine 0.362 kg Ff Paraformaldehyde (91+/-1% ||2.90 kg Purity) OR Methanol 3.85 kg [ | | 8 | [Bore Film (0.01 kg | Note:1.The above norms are based on 10.00 mm thickness with average weight of 14.5 kg +/- 2.5% and are applicable on 2 mm to 30 mm thickness. 2. In case of variation in thickness/weight, the quantity of item of import viz. Phenol, Para formaldehyde/Methanol and Kraft paper to be allowed may be arrived at by adopting the following formula: AxB/Cwhere A=Quantity allowed for 10.00 mm thickness of weight.14.5 kg +/- 2.5%B=The thickness or weight/ sq. Meter of decorative laminates proposed to be exported. C = Either the Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of 10.00 mm thickness. 3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. and Lal) Consultant 04.07.2019 DGFT(DES-IV)

IN — [05-124 79// 3/003 52 079115 | | | एरि€ || [ | | 7 [|[Methanot (0.398 Kg [sd | [ 8 | |]| B.O.P.P. Film (0.010 kg ] Note:1. The above norm has been worked out on the 1.00 mm thickness with average wt. of 1.45 Kg +/- 2.5% 2. In Case of variation in thickness/weight, the quantity of item of import viz. Phenol, Para Formaldehyde/Methanol and Kraft Paper to be allowed may be arrived by adopting the following formula: AxB/ C Where A=Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/-2.5%. B= The thickness or wt/sq. meter of decorative laminates proposed to be exported. C=Either the Standard thickness of 1.00 mm or the Standard wt. of 1.45 Kg/sq. meter of 1.00 mm thickness. 3.The quantity of items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine and BOPP Film will remain unchanged irrespective of thickness and weight of decorative laminate to be exported. 4. The above norms are applicable only in case of Decorative Laminates having thickness range between 0.5 mm and 1.5 mm thickness. | Single Side Decorative ||1 sq mtr x 1 1 Kraft paper (60 gsm - 350 a Kg Laminates without mm gsm) Barrier Paper Thickness of wt. 1.45 Kg +/-2.5% 2 Base Paper (50 gsm-150 |/0.133 kg gsm) 3 Tissue Paper (20 gsm - 38 |/0.033 kg gsm) a Ree parr | [| [ 5 | 5 [ Melamine (0.133 kg ॥ | | Paraformaldehyde (91+/-1% ||0.300 kg Purity) OR [ | [ 6 | 6 [| Methanol 0.398 Kg [ ॥ 7 [ | 8.0.7.7. Film 0.011 kg ॥ ee The above norms has been worked out on the 1.00 mm thickness with average wt. of 1.45 Kg +/-2.5% 2. In case of variation in thickness/weight,the quantity of item of import viz. Phenol, Paraformaldehyde, Kraft paper and Titanium Dioxide to be allowed may be arrived by adopting Formula: IAxB/C Where

Pane 3/to 8° हे 4) No.P-47011/198/2019-TSW eal /१/9//7 mage Government of India Ministry of Commerce & Industry Department for promotion of Industry & Internal Trade (TS Section) SR मई सर RK OK

Subject:- Request for re-consideration for fixation of norms against M/S

Deepak Fertilizers & Petrochemicals Corporation Ltd ,Advance Authorisation No. 3110066854 ,DT.29.08.2017-reg. Reference:- HQ F.NO. 01/83/50/381/AM18/DES-IV dated. 10.07.2019 The firm has submitted production/consumption data and also detail calculation for requirement of Anhydrous Ammonia for the manufacture of Nitric Acid 68%. Based on information submitted by the firm the following norms are recommended: Export: Nitric Acid 68% net content 2225 MT Quantity: 7542 MT Import S.No’ Import Item Quantity recommended ih Anhydrous Ammonia 2225 MT ge W ae (Nand fal Consultant DGFT(DES-IV)

ey P_ 47७ y]7 4/9611-75 भारत सरकार “y वाणिqज्य और उद्योग मंत्रालय उद्योग सवर्ध}न और आंतरि€क व्यापार वि„भाग टी. एस. अनुभाग 26 कट WV? 3 oh D3 Sub: Fixation of Norms under para 4.06 of HBP 2015-20 for flushed pigment / ॥।क्‍ (dispersed in non-equeous media) for printing ink Heatset Cyan 15 (18015) HS Code 32129090 Vide email dated 22.07.2019, the firm has submitted material balance and details of the case for the export of FLUSHED PIGMENT (DISPERSED IN NON -AQUEOUS MEDIA) FOR PRINTING INK HEATSET CYAN 15. Based, on past production consumption data and information furnished by the firm following norms are recommended. Export Item: FLUSHED PIGMENT (DISPERSED IN NON -AQUEOUS MEDIA) FOR PRINTING INK HEATSET CYAN 15 (30 %+/-10% PIGMENT & 38 %+/- 10% SOLID RESIN ) (HSC15) Quantity: 100 kg. Import item: Quantity st No. Item Description Ratonmandee (in kg.) Pigment Copper Phthalocyanine Blue 15 for Printing |g Inks. 30.2400 Raw Materials for Oil Soluble Phenolic Resin Based | gee Varnish (HS | . | 2.1| Rosin Modified Phenolic Hydrocarbon Resin. 15.5142 2.2) Vegetable Oil Refined (Soya/Coconut/Linseed). 1.4365 Petroleum Distillate Distillation Range 240 -330 Degree 2.3/Celsius 11.8741 Raw Materials for Rosin Modified Phenolic 2.1|Hydrocarbon Resin : 2.1.1] Light Magnesium Oxide 0.0085 2.1.2| Paraformaldehyde 0.6252 2.1.3} Pentaerythritol 0.6687 2.1.4| Alkyl Phenol 2.7910 2.1.5] Gum Rosin 6.6913 2.1.6} Dicyclopentadiene 5.7139 2.1.7|Maleic Anhydride 0.4685 2.1.8| Dimer Acid 0.1413 2.1.9] Neodene 0.8067

Raw Materials for Oil Soluble Phenolic Resin ‘Based | gape Me Varnish (HS

3.1| Phenol Modfied Hydrocarbon Resin 8.9000 3.2| Vegetable Oil (Linseed/Soya/Coconut 1.8000 Petroleum Distillate Distillation Range 240 -330 Degree 3.3/Celsius 7.5000 3.4| Butylated Hydroxy Toluene Solution 0.1000 | 341 Raw Materials for Phenol Modfied Hydro Carbon Resin 3.1.1] Light Magnesium Oxide 0.0019 3.1.2) Paraformaldehyde 0.5375 3.1.3] Pentaerythritol 0.5268 3.1.4] Alkyl Phenol 1.7685 3.1.5} Gum Rosin 3.78400 3.1.6} Dicyclopentadine 2.5280 3.1.7| Fumaric Acid 0.4362 3.1.8] Dimer Acid 0.0623 3.1.9] Neodene 0.3568 | ४ Raw Materials for Soya Alkyd with TPP |. | 4.1| Vegetable Oil Refine (Soya/Linseed/Coconut 9.875 4.2) Purified Terephthalic Acid 2.130 4.3) Pentaerythritol 1.417 4.5} Triphenyl Phosphite 0.013 Raw Materials for Coxi (Oil Retarder) HS containing | gee Oil and Butylated Hydroxy Toluene 25 % & Ink Oil Po 5.1} Butylated Hydroxy Toluene 0.6171 Petroleum Distillate Distillation Range 240 -330 Degree §.2\Celsius 1.8513 |g Vegetable Oil Refine (Soya/Linseed/Coconut! 3.3900 Petroleum Distillate Distillation Range 240 -330 Degree 7\Celsius 5.9700 |g Raw Materials for Packing Grease |. | 8. ey Soya Oil 0.5548 Panoil 400 0.0228

2 tone 8.4 ie नाना amine Tetra Acetic Acid |g Ethylene Di wee Lal) of Consultant DGFT (DES-IV)

a ७१ Fe. ९-५७००७ ०५) 26 1; pe 2/%-४ ३. हे ४ [५५५ wm 3 ff भारत सरकार | /D 3 no L ५ वाणिqज्य और उद्योग मंत्रालय उद्योग सवर्ध}न और आंतरि€क व्यापार वि„भाग of g ५७७ | टी. एस. अनुभाग 0 Ir] Sub: Fixation of Norms under para 4.06 of HBP 2015-20 for flushed pigment (dispersed in non-equeous media) for printing ink Yellow 12 (HSY12) HS Code 32129090 Vide email dated 22.07.2019, the firm has submitted material balance and details of the case for the export of FLUSHED PIGMENT (DISPERSED IN NON -AQUEOUS MEDIA) FOR PRINTING INK Yellow 12 (HSY12). Based, on past production consumption data and information furnished by the firm following norms are recommended. Export Item: FLUSHED PIGMENT ( DISPERSED IN NON -AQUEOUS MEDIA ) FOR PRINTING INK HEATSET YELLOW 12 ( 23 %+/-10% PIGMENT & 45%+/- 10% SOLID RESIN ) ( HSY12) Quantity: 100 kg. Import item: Quantity Recommended a0 NO. Item Description (in kg.) | _1 __| Pigment Yellow 12 for Printing Inks Or its raw material == eed 1.1 Aluminium Sulphate 1.0064 1.2 Additive 0.0168 1.3 Turkey Red Oil 0.2599 1.4 Gum Rosin 1.5933 1.5 Hydrochloric Acid (Pure 14.4667 1.6 Caustic Soda Lye 23.9154 1.7 Decamol-474 0.2096 | 1.8 | Sodium Acetate(Crystal 1.1182 | 1.9 | 3'Dichloro Benzidine Di hydrochloride 8.3864 1.10 Sodium Nitrite 4.6754 | 1.11 | Acetoacetanilide 12.0905 1.12 Sulfamic Acid 0.2096 am Raw Materials for Oil Soluble Phenolic Resin Based Grinding Varnish (HS ) |... / 2.4 Rosin Modified Phenolic Hydrocarbon Resin 16.5130 2.2 Vegetable Oil Refined (Soya/Coconut/Linseed). 1.5290 2.3 Petroleum Distillate Distillation Range 220 -330 Degree celsius 12.6387 ZA Raw Materials for Rosin Modified Phenolic Hydrocarbon Resin | || “5. | 2.1.1 Light Magnesium Oxide 0.0091 2.1.2 Paraformaldehyde 0.6655 2.1.3 Pentaerythritol 0.7117 2.1.4 Alkyl Phenol 2.9707 2:4.5 Gum Rosin 7.1221

3 [70-0 7 क्र) ॥ 2.1.6 Dicyclopentadiene Oo 24.7 Maleic Anhydride 0.4987 2.1.8 Dimer Acid | 01504 | 2.1.9 Neodene 0.8587 लि«खी Raw Materials for Oil Soluble Phenolic Resin Based Letdown Varnish (HS |. / 3.1 Phenol Modfied Hydrocarbon Resin [ 11.9252 | 3.2 Vegetable Oil (Linseed/Soya/Coconut 1.1145 3:5 Petroleum Distillate Distillation Range 220 -330 Degree celsius 9.2504 | 31] Raw Materials for Phenol Modfied Hydrocarbon Resin SY 3.1.1 Light Magnesium Oxide 0.0026 3.1.2 Paraformaldehyde 0.7265 31:3 Pentaerythritol 0.7122 3.1.4 Alkyl Phenol 2.3898 3.1.5 | Gum Rosin 5.0806 3.1.6 Dicyclopentadiene 3.3868 3.1.7 Fumaric Acid 0.5891 3.1.8 Dimer Acid 0.0847 3.1.9 Neodene | 05152 | | 4 | Raw Materials for Oil Soluble Phenolic Resin Based Grinding Varnish (MO |. / 4.1 Structured Phenolic Modified Rosin Ester | ._ 2610७" | | 4.2 | Methyl Oleate 1.8900 | 4.1 | Raw materials for Structured Phenolic Modified Rosin Ester [rc Trrt—‘“CSsSY | 4.1.1 | Light Magnesium Oxide 1|__ 0.22429 ____ | 4.1.2 Maleic Anhydride 0.0423 4.1.3 Paraformaldehyde | 0.399 | | 4.1.4 | Pentaerythritol 0.1724 4.15 Alkyl Phenol |. शव] Cd | 4.1.6 | Gum Rosin 1.5357 4.1.7 Butylated Hydroxytoluene 0.0107 | 4.2 | Raw Materials for Methyl Oleate [rl नर | | 4.2.1 | Tri phenyl phosphite 0.0013 | 4.2.2 | Para toluene sulfonic acid 0.0013 4.2.3 Distilled fatty acid 0.8325 | 4.2.4 | Normal butanol 0.2257 | 4.2.5 | Mix xylene 0.0077 | __5 [२०३७ Materials for Pigment Orange 3401 Pe 5.1 Additive 0.0060 5.2 Hydrochloric Acid (Pure 0.2568 §.3 Caustic Soda Lye 0.1332 5.4 Decamol-474 0.0042 5.5 3'Dichloro Benzidine Dihydrochloride 0.1200 | 5.6 __| Sodium Nitrite 0.0696 3.7 Sulfamic Acid 0.0030 | 5.8 _| 1(P.Tolyl) Phenyl 3-Methyl5-Pyrazolone 0.1920 | 6 __| Raw Materials for Soya Alkyd with TPP [le | 6.11 Vegetable Oil Refined (Soya/Linseed/Coconut 9.6444 | 6.2 | Purified Tert phthalic Acid 2.0304 6.3 Pentaerythritol 1.3972 6.4 Tripheny! Phosphite 0.0132 7 Raw Materials for Coxi(Oil Retarder)HS containing Base Oil and Butylated Hydroxytoluene 25 % & Ink Oil. |. | 7.4 Butylated Hydroxytoluene 0.5942 7.2 Petroleum Distillate Distillation Range 220 -330 Degree celsius 1.7825

Fn] a 8 |[Vegetable Cll Ret eee aan ee ue Oil Refined Soya/Linseed/Coconut ean ) 9 | ee पब्यपाकापापासस्क्य्य्¦स्ा¨ Distillate Distillation Range 220 -330 Degree celsius 10.4400 fi | 10 | [eae Haters for Packing SSS भा कब Materials for Packing Grease (ee W | 10.1__| Soya Oil roses | 10.2 |[eng 890 400 00180 | 10. |लि« ed 0.0650 0.0500 | 10.4 |Paes 7] eel (Nand Lal) Consultant 26.07.2019 DGFT (DES-IV)

४,४४० रू "७ Zor \r WN we | भारत सरकार 4 वाणिqज्य और उद्योग मंत्रालय उद्योग सवर्ध}न और आंतरि€क व्यापार वि„भाग टी. एस. अनुभाग Sub: Fixation of Norms under para 4.06 of HBP 2015-20 for flushed pigment (dispersed in non-equeous media) for printing ink Heatset MAGENTA 57 Vide email dated 22.07.2019, the firm has submitted material balance and details of the case for the export of FLUSHED PIGMENT (DISPERSED IN NON -AQUEOUS MEDIA) FOR PRINTING INK HEATSET MAGENTA 57. Based, on past production consumption data and information furnished by the firm following norms are recommended. Export Item: FLUSHED PIGMENT DISPERSED IN NON AQUESOUS MEDIA FOR PRINTING INKS HEATSET MAGENTA 57 28% +/- 10 % PIGMENT & 36% +/- 10% SOLID RESIN ( HSM57) Quantity: 100 kg. Import item: Quantity | SR.No | 1४0! ean 98डट7 10 Recommended (in kg 1| Raw Materials for Pigment Magenta 57 for i SY Printing Inks 1.1] Gum Rosin 1.2415) 1.2} Hydrochloric Acid (Pure 0.0207 1.3} Caustic Soda Lye 0.3206 1.4} Bon Acid 1.9655} 1.5} Sodium Nitrite 17.8455 1.6| Calcium Chloride Solution 29.5010 1.7| 4B Acid ( NP-1 0.2586 | _1 Raw Materials for Oil Soluble Phenolic Resin | /ऋ Based Grinding Varnish (HS 2.1| Rosin Modified Phenolic Hydrocarbon Resin. 12.3174 2.2| Vegetable Oil Refined (Soya/Coconut/Linseed). 1.1405} 2.3} Petroleum Distillate Distillation Range 240 -330 9.4274 Degree Celsius 2.1| Raw Materials for Rosin Modified Phenolic Po Hydrocarbon Resin 2.1.1) Light Magnesium Oxide 0.0068 2.1.2} Paraformaldehyde 0.4964) 2.1.3} Pentaerythritol 0.5309 2.1.4} Alkyl Phenol 2.2159)

2.1.5} Gum Rosin 2.1.6} Dicyclopentadiene 2.1.7| Maleic Anhydride 2.1.8] Dimer Acid 2.1.9] Neodene | 4 Raw Materials for Oil Soluble Phenolic Resin Po Based Letdown Varnish (HS 3.1) Phenol Modfied Hydrocarbon Resin 13.9590 3.2) Vegetable Oil (Linseed/Soya/Coconut 1.2925} ३.३ Petroleum Distillate Distillation Range 240 -330 10.7278 Degree Celsius 3.1) Raw Materials for Phenol Modfied Hydrocarbon Po Resin 3.1.1] Light Magnesium Oxide 0.0031 3.1.2| Paraformaldehyde 0.8504) 3.1.3] Pentaerythritol 0.8336 3.1.4} Alkyl Phenol 2.7974 3.1.5| Gum Rosin 5.9471 3.1.6} Dicyclopentadiene 3.9644 3.1.7) Fumaric Acid 0.6896 3.1.8] Dimer Acid 0.0991 3.1.9] Neodene 0.6030 |... 41२०५ Materials for Soya Alkyd with TPP fe | 4.1| Vegetable Oil Refined (Soya/Linseed/Coconut 6.9312 4.2) Purified Terephthalic Acid 1.4592) 4.3] Pentaerythritol 1.0041 4.4| Triphenyl Phosphite 0.0095 nm Raw Materials for Coxi (Oil Retarder) HS P| containing Base Oil and Butylated Hydroxy Toulene 25 % & Ink Oil 5.1| Butylated Hydroxytoluene 0.6197 5.2} Petroleum Distillate Distillation Range 240 -330 1.8590 Degree Celsius | ___ 6| Vegetable Oil Refine (Soya/Linseed/Coconut 0.5400) 7| Petroleum Distillate Distillation Range 240 -330 13.3300 Degree Celsius | ___8| Raw Materials for Packing Grease fe 8.1] Soya Oil 0.4672 8.2} Panoil 400 0.0192 8.3] Claytone 0.0832 8.4} Antibact 0.0640

a) Ortophosphoric Acid DGFT (DES-IV) W hg (Napd Lal) Consultant

3४ asf ia ¢ Al" No.P-47014/197/2019- Government of India Ministry of Commerce & Industry Department for promotion of Industry & Internal Trade (TS Section) Sub: Request for condonation/acceptance of monor mistake in the description of import/export product towards redemption of advance authorization No. 0510392731 Dt. 07.01.2015 in respect of M/s. Jindal Poly Films Ltd. A. A. No. 0510392731 Dated.. 07.01.15 Ref : HQ FNo. 01/83/050/0165/AM16/DES-IV dated. 10.07.2019 This case was considered in Meeting No. 8/83-AL1/2015 dt 16.09.2015 and approved by the committee, as under:- Export Item: Photo Print Kit 7000/6R Quantity : 2000 Number Import Items : pone | No. Item Description Qty recommended 1 | Wide Rolls of Thermal Photo Paper 7000 Net + 2.5% 2_| Photographic Ink Cartridges 7000 Net to net Vide letter dated 06.05.2019, the firm has stated that they have completed entire export obligation and submitted their request for redemption of the case with CLA, New Delhi. The licensing authority has raised some queries regarding mismatch of description of export / import product as approved by norms committee and shipping bill. The firm approached to policy relaxation committee (PRC) and PRC has referred the file to norms committee for taking necessary action.

1. Export product:- In this case Norms committee approved the export description as “Photo Print Kit 7000/6R’ where as they have mentioned the export product as Photo Print Kit 7000. Photo Print Kit 7000 denotes the grade of the roll and 6R denotes the print size i.e. 6” x 8” (15.2 cm x 20.3 cm) or 4” x 6” (10.2 cm x 15.2cm). They have stated that in the outer carton the same has been mentioned / printed. But, inadvertently 6R has been missed out in the shipping bill.

2. Import Product:- The Import Description as per the Norms Committee approval — Wide Rolls of Thermal Photo Paper 7000 whereas the firm has mentioned in the bill of entry Jumbo Rolls of Thermal Photo Paper 7000 They have stated that the mistake was inadvertent, and they have requested to condone the mistake in the descriptions of import and export item. Regarding, the export description the firm has missed out “6R” in shipping bill but stated that they have indicated the print sizes in the outer carton. For Import description they have mentioned Jumbo Rolls of Thermal Photo Paper 7000 in place of Wide Rolls of Thermal Photo Paper

3. Which is more or less same thing aS wastage for both LP will be the same. In view of the above, the proposal for condonation of mistake in the description of import/export product towards redemption of advance authorization may be considered by Norms Committee on one time basis, for this license only, as requested for. No further import and export will be allowed for the license. Consultant 13-08-2019 DGFT (DES-IV)

y Ref: »s iv F. No. 7/199/201 Loy HT sy, MINISTRY OF COMMERCE & INDUST! DEPARTMENT OF INDUSTRIAL POLICY & PROMOTION (TSW- SECTION) AR REAR के के कै के कै के

Subject: Wastage norms (revised) for export of polished granite slab-M/s Pacific

DGFT UO. No.01/83/043/AM-19/DES-IV - FoU In this case, the wastage norms were approved based on previous approval, in case of M/s. Jain Grani Marmo Pvt. Ltd. as under:- [S.No [Input —S*<|‘ Output ~—_—s|: Wastage Recommended 1 Indigenous Marble Rough Marble 34% i.e. 1.34 MT/MT of export Blocks (Irregular, slabs uneven shape 2. Imported Marble Rough Marble 10% i.e. 1.10 MT/MT of export Blocks (Regular slabs shape 3. Rough Marble labs Polished Marble 2% i.e. 1.02 MT/MT of export slabs/tiles | | Rough Granite tiles Polished Granite 3% i.e. 1.03 MT/MT of export tiles 5: Consumable- Polished Granite 9% the FOB value of export subject to Diamond Wire Set Slab conditions that input items 1 and 2 of SION A1833 namely Steel Grits or Shots / Gangsaw Blades and Diamond Segment / Diamond Circular Saw Blades/ Circular Saw Blades or blanks will not be allowed under duty exemption. Vide letter dated 10.06.2018, the firm has informed that their input and output product for SI. No. 1 to 3 above is granite and requested for amendment in the approved norms from marble to granite. We may have no objection for amendment in the description of wastage norms, from marble to granite, without changing the wastage percentage. Accordingly following norms may be recommended: [S.No [क_एण॑.. [00770 .[ Wasstage Recommended 1 Indigenous Granite Rough Granite 34% i.e. 1.34 MT/MT of export Blocks (Irregular, slabs uneven shape 2: Imported Granite Rough Granite 10% i.e. 1.10 MT/MT of export Blocks (Regular slabs shape 3. Rough Granitedabs Polished Granite 2% i.e. 1.02 MT/MT of export slabs/tiles a Rough Granite tiles Polished Granite 3% i.e. 1.03 MT/MT of export tiles 5. Consumable- Polished Granite 9% the FOB value of export subject to Diamond Wire Set Slab conditions that input items 1 and 2 of SION A1833 namely Steel Grits or Shots / Gangsaw Blades and Diamond Segment / Diamond Circular Saw Blades/ Circular Saw ser or blanks will not be allowed under duty exemption. NGFTINFS-IV) ३ (Nand Lal) Consultant 04.07.19