← Archive
IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

UDIN00085362AM26

==> picture [39 x 64] intentionally omitted <==

Government of India / भारत सरकार Ministry of Commerce and Industry / वािणज्य और उद्योग मंत्रालय Department of Commerce / वािणज्य िवभाग Directorate General of Foreign Trade, Delhi / िवदेश व्यापार महािनदेशालय, िदल्ली

VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वािणज्य भवन, अकबर रोड, नई िदल्ली Email Office : dgft@nic.in , Phone Office : 011-23062777

MINUTES OF THE NORMS COMMITTEE- II

MEETING No. NC/2/MEET/Apr/202526/2 DATED: 02/05/2025

Please Note

  • I. For information of exporters, Norms Committee - II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80, 85 .Communications in respect of cases/pertaining to NC- II may be sent to email address: nc2.dgft@nic.in

  • II. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC.

  • III. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

Meeting No. NC/2/MEET/Apr/202526/2 dated 02/05/2025 of Norms Committee - II for the year 2025-26 was held on 02/05/2025 under the Chairmanship of HARDEEP SINGH,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023.

The following members were present in the meeting:-

SI.No. Name and Designation of Representatives Department
1 SHRI S.K. BHATNAGAR, CONSULTANT (SKB) TECHNICAL CONSULTANT, DGFT
2 SHRI V.C. AGARWAL, CONSULTANT (TEC-3) TECHNICAL CONSULTANT, DGFT

gnation of Representatives**|Department| |---|---|---| |1|SHRI S.K. BHATNAGAR, CONSULTANT (SKB)|TECHNICAL CONSULTANT, DGFT| |2|SHRI V.C. AGARWAL, CONSULTANT (TEC-3)|TECHNICAL CONSULTANT, DGFT|

This document has been digitally signed by Santosh Kumar Dubey, Deputy DGFT on 15-05-2025 17:00:17.

1

UDIN00085362AM26

3 SHRI R.K. JAISWAL, DO MHI
4 SHRI S. K. JAIN, CONSULTANT DPIIT
5 SHRI SHAISH KUMAR (TEC-1) TECHNICAL CONSULTANT, DGFT
IN ATTENDANCE:
1 SHRI SANTOSH KUMAR DUBEY , Dy. DGFT DGFT

2

UDIN00085362AM26

Case Details and Decision(s):

Case No. 1 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MUNDRA SOLAR PV LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006436AM25
RA File Number NA
Licence No and<br>Date NA
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>The firm should submit application on prescribed Performa.<br>I.<br>The case stands deferred.

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

Case No. 2 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name INOX INDIA LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008096AM24
RA File Number NA
Licence No and<br>Date NA
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 3 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FCI OEN CONNECTORS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00009317AM24

3

UDIN00085362AM26

RA File Number NA
Licence No and<br>Date NA
Norms Committee Decision:<br>Case deferred for the comments of TE.

Q File Number|HQRNORM APPLY 00009317AM24|

3

UDIN00085362AM26

RA File Number NA
Licence No and<br>Date NA
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 4 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TUBACEX TUBES AND PIPES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00003263AM25
RA File Number 039504000387 AM19
Licence No and<br>Date 0310822579/25/07/2018
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 5 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHIVALIK BIMETAL CONTROLS LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00149890AM22
RA File Number 052404000242 AM19
Licence No and<br>Date 0510407345/27/07/2018
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 6 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED

4

UDIN00085362AM26

Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00004735AM25
RA File Number 039504001250 AM19
Licence No and<br>Date 0310828254/10/04/2019
Norms Committee Decision:<br>Case deferred for the comments of TE.

| |HQ File Number|HQRNORM REVIW00004735AM25| |RA File Number|039504001250 AM19| |Licence No and<br>Date|0310828254/10/04/2019| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 7 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name GUJARAT COPPER ALLOYS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000447AM26
RA File Number 039404000544 AM20
Licence No and<br>Date 0310832237/15/10/2019
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of consultant (SKB) dated 02.05.2025, as under:<br>Note: The written recommendation as given by Consultant (SKB) will be communicated to<br>the applicant as well as concerned RA through email.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 02.05.2025, as under:

Note: The written recommendation as given by Consultant (SKB) will be communicated to the applicant as well as concerned RA through email.

Case No. 8 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name LOTUS ADVANCE TECHNOLOGIES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00002008AM25
RA File Number 052304000391 AM20
Licence No and<br>Date 0510413205/03/01/2020
Norms Committee Decision:

5

MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM REVIW00002008AM25| |RA File Number|052304000391 AM20| |Licence No and<br>Date|0510413205/03/01/2020| |Norms Committee Decision:||

5

UDIN00085362AM26

Case deferred for the comments of TE.

Case No. 9 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name LOTUS ADVANCE TECHNOLOGIES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00002005AM25
RA File Number 052304000475 AM20
Licence No and<br>Date 0510413864/12/03/2020
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 10 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ARMOR PLAST PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00001773AM24
RA File Number 072404000309 AM20
Licence No and<br>Date 0710116277/18/03/2020
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 11 / NC/2/MEET/Apr/202526/2
Case Status Case Rejected
Party Name R T JAIN AND COMPANY
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00004876AM24
RA File Number 039504000347 AM21

6

UDIN00085362AM26

Licence No and 0310838097/04/09/2020 Date Norms Committee Decision:

The Committee considered the case as per agenda and decided to reject the case, as it has already been withdrawn by the firm vide letter dated 13.02.2024.

/2020 Date Norms Committee Decision:

The Committee considered the case as per agenda and decided to reject the case, as it has already been withdrawn by the firm vide letter dated 13.02.2024.

The case stands Rejected .

Case No. 12 / NC/2/MEET/Apr/202526/2
Case Status Case Rejected
Party Name MAK CONTROLS AND SYSTEMS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006464AM25
RA File Number 322404000056 AM21
Licence No and<br>Date 3210079734/01/10/2020
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided torejectthe case, as the firm has represented<br>for restoration of Export Product 2 & import item 24. These items were deleted as import and export items<br>are same and therefore there is no manufacturing activity. In view of above firm's request cannot be<br>accepted.<br>The case standsRejected.

The Committee considered the case as per agenda and decided to reject the case, as the firm has represented for restoration of Export Product 2 & import item 24. These items were deleted as import and export items are same and therefore there is no manufacturing activity. In view of above firm's request cannot be accepted.

Export Product 2 & import item 24. These items were deleted as import and export items are same and therefore there is no manufacturing activity. In view of above firm's request cannot be accepted.

Case No. 13 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ICON POWER SOLUTIONS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004346AM25
RA File Number NA
Licence No and<br>Date 0510415915/18/11/2020
Norms Committee Decision:

7

UDIN00085362AM26

Case No. 14 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name SHRI SABHARI SMELTERS PRIVATE LIMITED
Meeting Number and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000238AM25
RA File Number 04AA04008307 AM22
Licence No and Date 0411001161/20/07/2021
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 01.05.2025, as under:<br>SL NO ITEM<br>OF<br>EXPORT<br>QUANTITY ITEM<br>OF<br>IMPORT<br>WASTAGE<br>TO<br>BE<br>ALLOWED<br>1<br>PURE LEAD<br>/<br>REFINED<br>LEAD<br>(PURITY OF<br>99.97<br>PERCENT<br>TO<br>99.98<br>PERCENT)<br>250.00 MTS<br>LEAD<br>ACID<br>BATTERY SCRAP<br>/<br>BATTERY<br>SCRAP<br>AND<br>WASTE / LEAD<br>SCRAP<br>AS<br>PER<br>ISRI RAINS (LEAD<br>CONTENT<br>50-55<br>PERCENT<br>**6%**ON THE<br>NET<br>CONTENT OF<br>LEAD IN THE<br>EXPORT<br>PRODUCT<br>Note:<br>The Compa

SCRAP<br>AND<br>WASTE / LEAD<br>SCRAP<br>AS<br>PER<br>ISRI RAINS (LEAD<br>CONTENT<br>50-55<br>PERCENT<br>**6%**ON THE<br>NET<br>CONTENT OF<br>LEAD IN THE<br>EXPORT<br>PRODUCT<br>Note:<br>The Company has to produce a certificate of analysis (COA) from the customs authorized<br>laboratory/supplier on the net content of lead in the imported item and also consent to operate from<br>MOEF&CC/CPCB/SPCB for processing of lead scrap (rains) for manufacturing of pure lead ingots,<br>to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 01.05.2025, as under:

The Company has to produce a certificate of analysis (COA) from the customs authorized laboratory/supplier on the net content of lead in the imported item and also consent to operate from MOEF&CC/CPCB/SPCB for processing of lead scrap (rains) for manufacturing of pure lead ingots, to the RA concerned.

Case No. 15 / NC/2/MEET/Apr/202526/2

8

UDIN00085362AM26

ent to operate from MOEF&CC/CPCB/SPCB for processing of lead scrap (rains) for manufacturing of pure lead ingots, to the RA concerned.

Case No. 15 / NC/2/MEET/Apr/202526/2

8

UDIN00085362AM26

Case Status Case Rejected
Party Name R T JAIN AND COMPANY
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00004855AM24
RA File Number 03AA040109387 AM22
Licence No and<br>Date 0311007654/12/10/2021
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided torejectthe case, as it has already been<br>withdrawn by the firm vide letter dated 05.03.2024.<br>The case standsRejected.

The Committee considered the case as per agenda and decided to reject the case, as it has already been withdrawn by the firm vide letter dated 05.03.2024.

Case No. 16 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name CUBIC SYSTEMS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00273805AM22
RA File Number 07AA04039296 AM22
Licence No and<br>Date 0711002542/03/12/2021
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 17 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name USHA MARTIN LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00322813AM22
RA File Number 02AX04000085 AM22
Licence No and<br>Date 0211001828/18/01/2022
Norms Committee Decision:

9

UDIN00085362AM26

2 and 02/05/2025| |HQ File Number|HQRNORM APPLY 00322813AM22| |RA File Number|02AX04000085 AM22| |Licence No and<br>Date|0211001828/18/01/2022| |Norms Committee Decision:||

9

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/64/2024-TSW dated 01.04.2025, as under:

  • I. Import item at SI No.1 shall be of relevant grade of steel as contained/utilized in the export item.

  • II. Quantity of import item at SI.No.1 may be allowed as 1.02 Kgs. /Kg. content in the export item.

  • III. Quantity of import item at SI No.2 may be allowed as 6.552 MT taking clue from SION C-670. IV. Quantity of import item at SI.No.3 (Zinc) may be allowed as applied for i.e. 50.78 MT.

  • V. Quantity of import item at SI No.4 may be allowed as applied for being less than 0.5% of FOB value of exports.

RA concerned may take suitable consequential action accordingly.

Case No. 18 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name DEWAN & SONS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00356006AM22
RA File Number 05AX04000977 AM22
Licence No and<br>Date 0511008829/15/02/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00356006AM22| |RA File Number|05AX04000977 AM22| |Licence No and<br>Date|0511008829/15/02/2022| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 19 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00383139AM22
RA File Number 03AA040123937 AM22
Licence No and<br>Date 0311012554/11/03/2022
Norms Committee Decision:

10

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • I. Detailed calculation for the quantities of import items supported by the cross sectional diagram of the export products.

  • Weight of each Export Product.

  • II.

  • III. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

The case stands deferred.

etails of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

The case stands deferred.

Case No. 20 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name LLABDHI MANUFACTURING LLP
Meeting Number and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000006AM23
RA File Number 03AX04002098 AM22
Licence No and Date 0311013536/01/04/2022
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of consultant (SKB) dated 01.05.2025, as under:<br>Sl<br>No<br>Export Item<br>Quantity<br>Item of<br>Import<br>Quantity<br>COLD<br>ROLLED<br>STAINLESS<br>STEEL COIL<br>2B<br>FINISHED<br>GRADE 201-<br>J1 NICKEL<br>CHROMIUM<br>AUSTENITIC<br>1.03 KG/KG<br>ON THE NET<br>WEIGHT OF<br>COLD<br>ROLLED<br>STAINLESS<br>STEEL<br>SHEETS/COILS<br>IN THE<br>EXPORT<br>1<br>COLD ROLLED STAINLESS STEEL SHEET/COIL<br>PVC COATED (NICKEL CHROMIUM<br>AUSTENITIC TYPE) MIRROR /N4/HAIRLINE<br>/VIBRATION/ SANDBLAST FINISH/ COLORED<br>SHEETS WIDTH ABOVE 600 MM THICKNESS:0.5<br>MM TO 1.0 MM GRADE 201/J1<br>268456.00<br>KGS

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

11

UDIN00085362AM26

==> picture [379 x 314] intentionally omitted <==

as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

11

UDIN00085362AM26

==> picture [379 x 314] intentionally omitted <==

----- Start of picture text -----<br> TYPE PRODUCT.<br>ABOVE 600<br>MM WIDTH<br>THICKNESS<br>MORE<br>THAN 1.0<br>MM<br>COLD<br>ROLLED<br>STAINLESS 1.03 KG/KG<br>STEEL COIL ON THE NET<br>2B WEIGHT OF<br>COLD ROLLED SLITTED STAINLESS-STEEL FINISHED COLD<br>SHEET/COIL PVC COATED (MAGNETIC GRADE 430 ROLLED<br>AUSTENITIC TYPE) 134228.00 MAGNATIC SLITTED<br>2<br>MIRROR/N4/HAIRLINE/VIBRATION/SANDBLAST KGS AUSTENITIC STAINLESS-<br>FINISH/ COLORED SHEETS WIDTH ABOVE 600 TYPE STEEL<br>MM THICKNESS: 0.5 MM TO 1.0 MM GRADE 430 ABOVE 600 SHEET/COIL<br>MM IN THE<br>THICKNESS EXPORT<br>MORE PRODUCT<br>THAN 1.0<br>MM.<br>----- End of picture text -----<br>

Note:

  • I. The grade of the imported cold rolled stainless steel coils 2b finished should be matched with the grade of stainless steel of the exported product.

  • II. The thickness of the imported cold rolled stainless steel coils 2b finished should be more than the thickness of the export product.

Case No. 21 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JAIN RESOURCE RECYCLING LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00009118AM24
RA File Number 04AX04000065 AM23
Licence No and<br>Date 0411003236/04/05/2022

12

UDIN00085362AM26

Norms Committee Decision:

Case No. 22 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name SHRI SABHARI SMELTERS PRIVATE LIMITED
Meeting Number and<br>Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000245AM25
RA File Number 04AX04000112 AM23
Licence No and Date 0411003285/13/05/2022
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 01.05.2025, as under:<br>SL<br>NO<br>ITEM<br>OF<br>EXPORT<br>QUANTITY ITEM<br>OF<br>IMPORT<br>WASTAGE<br>TO<br>BE<br>ALLOWED<br>1<br>PURE LEAD<br>INGOTS<br>/<br>REFINED<br>LEAD<br>INGOTS.<br>500.00 MTS<br>LEAD<br>BATTERY<br>SCRAP AS PER<br>ISRI<br>RAINS<br>RECOVERY%<br>%: 55-57% PB<br>CONTENT.<br>**6%**ON THE<br>NET<br>CONTENT<br>OF LEAD IN<br>THE<br>EXPORT<br>PRODUCT<br>**Note:**the company has to produce a certificate of analysis (COA) from the customs authorized<br>laboratory/supplier on the net content of lead in the imported item and also consent to operate from<br>MOEF&CC/CPCB/SPCB for processing of lead scrap (rains) for manufacturing of pure lead ingots,<br>to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 01.05.2025, as under:

tion accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 01.05.2025, as under:

Note: the company has to produce a certificate of analysis (COA) from the customs authorized laboratory/supplier on the net content of lead in the imported item and also consent to operate from MOEF&CC/CPCB/SPCB for processing of lead scrap (rains) for manufacturing of pure lead ingots, to the RA concerned.

Case No. 23 / NC/2/MEET/Apr/202526/2

13

UDIN00085362AM26

Case Status Case Deferred
Party Name A-1 FENCE PRODUCTS COMPANY PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00004378AM23
RA File Number 03AX04001066 AM23
Licence No and<br>Date 0311015507/15/06/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 24 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name POLYCAB INDIA LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00002249AM25
RA File Number 03AX04001851 AM23
Licence No and<br>Date 0311015727/21/06/2022
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>List of Cables with size of conductors in cables along with quantities of cables in Kms, conductor<br>size wise for amended export items at SI.No.

mation/documents as per comments given by the TE:<br>List of Cables with size of conductors in cables along with quantities of cables in Kms, conductor<br>size wise for amended export items at SI.No. 1, 2 & 3.<br>I.<br>Detailed calculations for the requirement of each raw material, export product wise supported by the<br>Cross sectional diagram of the cable/Buyers data sheet.<br>II.<br>Net weight per KM of each Cable Material balancing viz. net content of each imported and<br>indigenous input, export product wise, per KM of export product.<br>III.<br>Total requirement of each raw material, export product wise, in a tabular form.<br>IV.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • I. List of Cables with size of conductors in cables along with quantities of cables in Kms, conductor size wise for amended export items at SI.No. 1, 2 & 3.

  • II. Detailed calculations for the requirement of each raw material, export product wise supported by the Cross sectional diagram of the cable/Buyers data sheet.

  • III. Net weight per KM of each Cable Material balancing viz. net content of each imported and indigenous input, export product wise, per KM of export product.

Case No. 25 / NC/2/MEET/Apr/202526/2

14

UDIN00085362AM26

each Cable Material balancing viz. net content of each imported and indigenous input, export product wise, per KM of export product.

Case No. 25 / NC/2/MEET/Apr/202526/2

14

UDIN00085362AM26

Case Status Case Deferred
Party Name ANJANEY FERRO ALLOYS LTD.
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002665AM23
RA File Number 26AX04000022 AM23
Licence No and<br>Date 2611000666/17/08/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 26 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JAIN RESOURCE RECYCLING LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00009123AM24
RA File Number 04AX04000460 AM23
Licence No and<br>Date 0411003877/29/08/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 27 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JAY BHAWANI METAL INDUSTRIES
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00008454AM24
RA File Number 03AX04003123 AM23
Licence No and<br>Date 0311018051/22/09/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.

15

UDIN00085362AM26

REVIW00008454AM24| |RA File Number|03AX04003123 AM23| |Licence No and<br>Date|0311018051/22/09/2022| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

15

UDIN00085362AM26

Case No. 28 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name WAAREE ENERGIES LIMITED
Meeting Number<br>d D NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
an ate
H Fil b HRORM REI00006186AM24
Q e Numer QN VW
RA Fil b 52AX0400168 AM23
e Numer 9
Licence No and<br>D 5211003583/17/11/2022
ate
Ci ii
Norms ommttee ecson:
The Committee<br>with respect to, A considered the case as per agenda and noted that a similar case has already been ratified<br>.A. No.5211002030/15/02/2022ofWAAREE ENERGIES LIMITEDin NC-2 meeting
<br>dated30/01/2023, as per comments of (Tec-3) via email dated22.01.2023and on repeat case basis, this case<br>ofWAAREE ENERGIES LIMITEDis ratified , as under:
The words “Weight = 33.80Kg/Module& bifacial module having glass on both sides” may be<br>added in the description of the export product.<br>1.<br>The quantity of import items atSl. No. 1, 2, 3, 4 & 9may be allowed onnet to net basis as per<br>2.
GN4.<br>
The quanti<br>3.<br> ty of import item atSl. No. 5 & 6may be allowed as net plus0.5% wastage.<br>
The quant<br> <br>4. ity of import items atSl. No. 7, 8, 10 & 11may be allowed as applied for with the<br>
condition t hat value restricted up to2 % fob value.
N ote:
1 .

| |The quant<br> <br>4.|ity of import items atSl. No. 7, 8, 10 & 11may be allowed as applied for with the<br>| |condition t|hat value restricted up to2 % fob value.| ||| |N|ote:| |1|. Export product will contain 72 imported cells per module.| |2. Specification of imported cells will be same as used in export product.|| |RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and noted that a similar case has already been ratified with respect to, A.A. No. 5211002030 / 15/02/2022 of WAAREE ENERGIES LIMITED in NC-2 meeting dated 30/01/2023 , as per comments of (Tec-3) via email dated 22.01.2023 and on repeat case basis, this case of WAAREE ENERGIES LIMITED is ratified , as under:

  1. The words “ Weight = 33.80Kg/Module & bifacial module having glass on both sides” may be added in the description of the export product.

  2. The quantity of import items at Sl. No. 1, 2, 3, 4 & 9 may be allowed on net to net basis as per GN4.

  3. The quantity of import items at Sl. No. 7, 8, 10 & 11 may be allowed as applied for with the condition that value restricted up to 2 % fob value .
Case No. 29 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name VIDYA WIRES LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

16

UDIN00085362AM26

--|---| ||| |Case No.|29 / NC/2/MEET/Apr/202526/2| |Case Status|Case Deferred| |Party Name|VIDYA WIRES LIMITED| |Meeting Number|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025|

16

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00004466AM23
RA File Number 34AX04000712 AM23
Licence No and<br>Date 3411003020/18/11/2022
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 30 / N C/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MAX OP ENGINEERING COMPANY PRIVATE LIMITED
Meeting Number
and Date NC/ 2 / MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQR NORM REVIW00005883AM25
RA File Number 05AX04002296 AM23
Licence No and<br>Date 0511015676/24/11/2022
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Reason /justification for review of norms<br>I.<br>A copy of the norms fixed by the Norms Committee for this A.A., if any.<br>II.<br>Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>furnished.<br>III.<br>Weight of each Export Product.<br>IV.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated.

input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>V.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>VI.<br>The case stands deferred.||| ||||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • III. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • V. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

ted. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • VI. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

17

UDIN00085362AM26

Case No. 31 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SATURN INDUSTRIES
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004794AM23
RA File Number 07AX04001220 AM23
Licence No and<br>Date 0711005856/02/12/2022
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Gross input weight and net weight of imported raw material contained in each export product.<br>I.<br>Dimensional drawing of export products and their weight.<br>II.<br>Dimensions of input blank (raw material) used for each export product.<br>III.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed

basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>IV.<br>Sheet layout diagram of the material indicating the wastage during blanking.<br>V.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • IV. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
Case No. 32 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name AURA INDUSTRIAL EQUIPMENT AND PROJECTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004973AM23
RA File Number 04AX04000798 AM23
Licence No and<br>Date 0411004605/13/12/2022
Norms Committee Decision:

18

UDIN00085362AM26

and 02/05/2025| |HQ File Number|HQRNORM APPLY 00004973AM23| |RA File Number|04AX04000798 AM23| |Licence No and<br>Date|0411004605/13/12/2022| |Norms Committee Decision:||

18

UDIN00085362AM26

Case No. 33 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name DISHA AUTO COMPONENTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00003781AM25
RA File Number 03AX04004735 AM23
Licence No and<br>Date 0311020316/28/12/2022
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 34 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PARAS LAMINATES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005794AM23
RA File Number 05AX04003051 AM23
Licence No and<br>Date 0511016903/18/01/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 35 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name UNO MINDA D-TEN INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006098AM23
RA File Number 05AX04002425 AM23

19

UDIN00085362AM26

Licence No and 0511017178/06/02/2023 Date Norms Committee Decision:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 09.04.2025, as under:

d 0511017178/06/02/2023 Date Norms Committee Decision:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 09.04.2025, as under:

  • I. As per the committee’s decision, item of imports Multilon T-3750 Polycarbonate and PC Iupilon 7051A: As applied for with 5 % wastage .

  • II. Items of Import as raw material may be allowed as under:

Import Item Description Net content in<br>Kg per unit of<br>EP <br> <br>% wastage allowed<br>after recovery on<br>net content basis
ELECTROLYTIC GALVANISED STEEL COIL<br>“SILVER – TOP”, COATING : 20/20 0.60 mm<br>(135835- 91300700) <br> <br>0.043 23.81%
ELECTROLYTIC GALVANISED STEEL COIL<br>“SILVER<br>–<br>TOP”,<br>COATING<br>:<br>20/20<br>0.80<br>mm`(135854-28900700) <br> <br>0.0045 139.26%
ELECTROLYTIC ZINK-COATED STEEL SHEET<br>IN COIL, EXCEL ZINK DULL FINISHED AND<br>UNOILED:<br>SECC<br>0.60<br>mm(135862-<br>24900700,135862-25000700 &135862-25100700) <br> <br> <br>0.1465 46.87%
ELECTROLYTIC ZINK-COATED STEEL SHEET<br>IN COIL, EXCEL ZINK DULL FINISHED AND<br>UNOILED: SECC 0.80 mm (135854- 29800700 &<br>135862-24200700) <br> <br> <br>0.4162 37.35%

  • III. Items of Import Humiseal may be allow as consumable up to 1% of FOB of Export Product or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as component on net-to-net basis under GN-4 with accountability clause.

20

UDIN00085362AM26

ort Product or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as component on net-to-net basis under GN-4 with accountability clause.

20

UDIN00085362AM26

Case No. 36 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name WAAREE ENERGIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006293AM23
RA File Number 52AX04001734 AM23
Licence No and<br>Date 5211004175/13/02/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (TEC-3) dated 01.05.2025, as under:<br>Export Product-Add wt. 22.3.kg./unit<br>Import 1- Net content in Export Product**+ 1% wastageor as applied whichever is lower<br>2-75045 nosas appliedas per GN4.<br>3-75000 setsconsisting 2 long & 2 short arms eachas per GN4.<br>4 to 6 - Net+ 0.5% wastageor as applied whichever is lower.<br>7, 8, 10 & 11 - As applied .Value restricted up to2% of fob value.**<br>9-75000 nos. as per GN4.<br>Note:<br>Export Product will contain 66 imported cells per module.<br>I.<br>Specification of imported cells will be same as used in Export Product.<br>II.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (TEC-3) dated 01.05.2025, as under:

y take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (TEC-3) dated 01.05.2025, as under:

Case No. 37 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHERA METAL PRIVATE LIMITED

21

UDIN00085362AM26

Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006516AM23
RA File Number 13AX04000310 AM23
Licence No and<br>Date 1311001764/22/02/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 38 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name JAY BHAWANI METAL INDUSTRIES
Meeting Number and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006609AM23
RA File Number 03AX04005521 AM23
Licence No and Date 0311021736/27/02/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of consultant (SKB) dated 01.05.2025, as under:<br>SL<br>NO EXPORT ITEM<br>QUANTITY ITEM<br>OF<br>IMPORT<br>QUANTITY TO<br>BE ALLOWED<br>ELECTROLYTIC<br>COPPER<br>WIRE<br>BAR/FLATS/RODS/BUS<br>BARS ELECTROLYTIC<br>COPPER BUS BARS –<br>74071010<br>33834.33<br>KGS<br>COPPER<br>SCRAP<br>COVERED<br>BY<br>ISRI<br>CODE<br>WORDS<br>BARLEY,<br>BERRY,<br>BIRCH,<br>CLOVE,<br>CANDY<br>WASTAGE<br>@<br>**2.5%.**ON THE<br>NET CONTENT<br>OF COPPER IN<br>THE<br>EXPORT<br>PRODUCT.<br>COPPER<br>SCRAP<b

Y<br>ISRI<br>CODE<br>WORDS<br>BARLEY,<br>BERRY,<br>BIRCH,<br>CLOVE,<br>CANDY<br>WASTAGE<br>@<br>2.5%.ON THE<br>NET CONTENT<br>OF COPPER IN<br>THE<br>EXPORT<br>PRODUCT.<br>COPPER<br>SCRAP<br>COVERED<br>BY<br>ISRI<br>CODE<br>WORDS<br>BARLEY,<br>BERRY,<br>1<br>ELECTROLYTIC<br>COPPER<br>WIRE<br>BAR/FLATS/RODS/BUS<br>BARS ELECTROLYTIC<br>COPPER<br>RODS<br>-<br>74071020<br>11425.84<br>KGS<br>WASTAGE<br>@<br>**2.5%.**ON THE<br>NET CONTENT<br>OF COPPER IN<br>THE<br>EXPORT<br>PRODUCT.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

22

UDIN00085362AM26

BIRCH, CLOVE, CANDY

NOTE:

  • I. The purity of the export product should be more than the content of copper in the imported copper scrap.

  • II. The company has to produce a certificate of analysis (COA) from the customs authorized laboratory/supplier of the copper content in the item of import and consent to operate from MOEF &CC/CPCB/SPCB for processing of copper scrap for manufacturing of electrolytic copper bus bars & rods, to the RA concerned.

Case No. 39 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name R R KABEL LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006686AM23
RA File Number 03AX04005761 AM23
Licence No and<br>Date 0311021820/01/03/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 40 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name LASER POWER & INFRA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006081AM24
RA File Number 02AX04000687 AM23
Licence No and 0211004051/15/03/2023

23

UDIN00085362AM26

Date

Norms Committee Decision:

Case No. 41 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name RENEWSYS INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006481AM25
RA File Number 07AX04001863 AM23
Licence No and<br>Date 0711006749/15/03/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.

| |HQ File Number|HQRNORM REVIW00006481AM25| |RA File Number|07AX04001863 AM23| |Licence No and<br>Date|0711006749/15/03/2023| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 42 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FEX FOUNDRY ALLOYS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007197AM23
RA File Number 05AX04003581 AM23
Licence No and<br>Date 0511017988/24/03/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 43 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name AMITRON TUBULARS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

24

UDIN00085362AM26

HQ File Number HQRNORM APPLY 00007245AM23
RA File Number 08AX04002015 AM23
Licence No and<br>Date 0811007717/27/03/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 44 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PARAMOUNT COMMUNICATIONS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007340AM23
RA File Number 05AX04003695 AM23
Licence No and<br>Date 0511018114/31/03/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00007340AM23| |RA File Number|05AX04003695 AM23| |Licence No and<br>Date|0511018114/31/03/2023| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 45 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MANTRAM INDUSTRIES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000076AM24
RA File Number 56AX04000410 AM23
Licence No and<br>Date 5611001709/10/04/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.

Case No. 46 / NC/2/MEET/Apr/202526/2

25

UDIN00085362AM26

Case Status Case Deferred
Party Name CONSOLIDATED COIN COMPANY PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00003002AM25
RA File Number 05AX04000002 AM24
Licence No and<br>Date 0511018301/13/04/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 47 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SELP INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000744AM24
RA File Number 03AX04000387 AM24
Licence No and<br>Date 0311023471/10/05/2023
Norms Committee Decision:
Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000744AM24| |RA File Number|03AX04000387 AM24| |Licence No and<br>Date|0311023471/10/05/2023| |Norms Committee Decision:|| |Case deferred for the comments of TE.||

Case No. 48 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FEX FOUNDRY ALLOYS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000796AM24
RA File Number 05AX04000375 AM24
Licence No and<br>Date 0511018798/12/05/2023
Norms Committee Decision:
Case deferred for the comments of TE.

26

UDIN00085362AM26
C N 49 / NC/2/MEET/A/202526/2
ase o. pr
C Stt C Dfd
ase aus ase eerre
Pt N SEETHA TECHNOLOGIES
ary ame ,
Meeting Number<br>d Dt NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
an ae
HQ File Number HQRNORM APPLY 00000863AM24
RA File Number 04AX04000086 AM24
Licence No and
Date 0411005411/16/05/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>
information/docu ments as per comments given by the TE:
Weight of<br>I.<br>Weight of<br>II. each Export Product.<br>each of the imported and indigenous input, separately for each product, for the purpose of
material b alancing. Net weight (Gross weight minus wastage) for each imported and indigenous input
in the exp<br> ort product may be indicated.

t, separately for each product, for the purpose of| |material b|alancing. Net weight (Gross weight minus wastage) for each imported and indigenous input| |in the exp<br>|ort product may be indicated. Net weight along with details of other imported input to be<br>| |used in the<br>if any, ma|resultant product and sought to be imported/procured from sources other than the license,<br>y also be indicated.| |Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and suorted b documentar evidence/drawins etc<br>III.|| |pp y y g .<br>The case stands deferred.|| ||| ||| ||| ||| ||| |Case No|50 / NC/2/MEET/Ar/202526/2| |.|p| |Case Status|Case Deferred| ||| |Part Name|ZOBELE INDIA PRIVATE LIMITED| |y|| |Meeting Number<br>and Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| ||| |HQ File Number|HQRNORM REVIW00000263AM26| |RA File Number|03AX04000389 AM24| |Licence No and|| |Date|0311023626/16/05/2023| |Norms Committee Decision:||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

023| |Norms Committee Decision:||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • III. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case No. 50 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ZOBELE INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000263AM26
RA File Number 03AX04000389 AM24
Licence No and<br>Date 0311023626/16/05/2023
Norms Committee Decision:

27

UDIN00085362AM26

and 02/05/2025| |HQ File Number|HQRNORM REVIW00000263AM26| |RA File Number|03AX04000389 AM24| |Licence No and<br>Date|0311023626/16/05/2023| |Norms Committee Decision:||

27

UDIN00085362AM26

Case No. 51 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name CUBIC SYSTEMS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000981AM24
RA File Number 07AX04000194 AM24
Licence No and<br>Date 0711007622/19/05/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 52 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MICRO PLASTICS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001448AM24
RA File Number 07AX04000350 AM24
Licence No and<br>Date 0711008233/09/06/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 53 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FUJIYAMA POWER SYSTEMS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001963AM24
RA File Number 05AX04000710 AM24

28

UDIN00085362AM26

Licence No and 0511019431/20/06/2023 Date Norms Committee Decision: Case deferred for the comments of TE.

|HQRNORM APPLY 00001963AM24| |RA File Number|05AX04000710 AM24|

28

UDIN00085362AM26

Licence No and 0511019431/20/06/2023 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 54 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name RENEWSYS INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006479AM25
RA File Number 07AX04000540 AM24
Licence No and<br>Date 0711008513/10/07/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (TEC-3) dated 01.05.2025, as under:<br>The firm has represented that description of EP & import items may be corrected as per shipping bill<br>and bill of entry as RA has objected to the amendments done by NC. Description of Export Product<br>& some of import items were amended to include specifications as the details in AA were generic.<br>Details in shipping bill and bill of entry also include specifications and description of EP can be<br>amended as per shipping bill & import items 1, 2 & 4 as per bill of entry. There will be no change in<br>quantity allowed earlier.<br>I.<br>There will be no change in other items as well.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (TEC-3) dated 01.05.2025, as under:

y take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (TEC-3) dated 01.05.2025, as under:

  • I. The firm has represented that description of EP & import items may be corrected as per shipping bill and bill of entry as RA has objected to the amendments done by NC. Description of Export Product & some of import items were amended to include specifications as the details in AA were generic. Details in shipping bill and bill of entry also include specifications and description of EP can be amended as per shipping bill & import items 1, 2 & 4 as per bill of entry. There will be no change in quantity allowed earlier.
Case No. 55 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FEX FOUNDRY ALLOYS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004359AM24
RA File Number 05AX04000973 AM24

29

UDIN00085362AM26

Licence No and 0511019730/11/07/2023 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 56 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ZOBELE INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000264AM26
RA File Number 03AX04001682 AM24
Licence No and<br>Date 0311025384/14/07/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.

| |HQ File Number|HQRNORM REVIW00000264AM26| |RA File Number|03AX04001682 AM24| |Licence No and<br>Date|0311025384/14/07/2023| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 57 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name UNO MINDA D-TEN INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005743AM24
RA File Number 05AX04001691 AM24
Licence No and<br>Date 0511021024/18/09/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (MHI) dated 09.04.2025, as under:<br>As per the committee’s decision, item of import atS. No. 61(Multilon T-3750 Polycarbonate) and 62<br>(PC Iupilon 7051A): As applied for with5 % wastage.<br>I.<br>Items of Import atSI.No. 33, 34, 35, 35as raw material may be allowed as under:<br>II.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 09.04.2025, as under:

  • I. As per the committee’s decision, item of import at S. No. 61 (Multilon T-3750 Polycarbonate) and 62 (PC Iupilon 7051A): As applied for with 5 % wastage .

30

UDIN00085362AM26

er:

  • I. As per the committee’s decision, item of import at S. No. 61 (Multilon T-3750 Polycarbonate) and 62 (PC Iupilon 7051A): As applied for with 5 % wastage .

30

UDIN00085362AM26

Import Net content in % wastage
SI.No. as per Import Item Kg per unit of after
AA EP recovery
ELECTROLYTIC GALVANISED STEEL COIL
33. SILVER - TOP , COATING : 20/20 0.60 mm(135835- 0.043 24.19%
91300700)
ELECTROLYTIC GALVANISED STEEL COIL
34. SILVER - TOP , COATING : 20/20 0.80 mm`(135854- 0.005 120.00%
28900700)
ELECTROLYTIC ZINK-COATED STEEL SHEET IN
35. COIL, EXCEL ZINK DULL FINISHED AND<br>UNOILED: SECC 0.60 mm(135862- 24900700,135862- 0.147 46.26%
25000700 &135862-25100700)
ELECTROLYTIC ZINK-COATED STEEL SHEET IN
36. COIL, EXCEL ZINK DULL FINISHED AND<br>UNOILED: SECC 0.80 mm (135854- 29800700 & 0.416 37.34%
135862-24200700)

  • III. Item of Import at SI.No. 58 (Humiseal) may be allow as consumable up to 1% of FOB of Export Product or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as component on net-to-net basis under GN-4 with accountability clause.

up to 1% of FOB* of Export Product or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as component on net-to-net basis under GN-4 with accountability clause.
Case No. 58 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BIOURJA ENERGY ALLOYS PRIVATE LIMITED
Meeting Number NC/ 2/ MEET/ A/ 202526/ 2 d 02/05/2025
and Date pr an
HQ File Number HQRNORM APPLY 00005837AM24
RA File Number 56AX04000271 AM24
Licence No and 5611002206/25/09/2023
Date
Norms Committee Decision:

31

UDIN00085362AM26

Case No. 59 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name GOPALAN TECH FABS INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005877AM24
RA File Number 07AX04000974 AM24
Licence No and<br>Date 0711009301/26/09/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 60 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name NUEVOSOL MANUFACTURING PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005950AM24
RA File Number 09AX04000566 AM24
Licence No and<br>Date 0911005875/29/09/2023
Norms Committee Decision:
Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00005950AM24| |RA File Number|09AX04000566 AM24| |Licence No and<br>Date|0911005875/29/09/2023| |Norms Committee Decision:|| |Case deferred for the comments of TE.||

Case No. 61 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHIVALIK BIMETAL CONTROLS LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006012AM24
RA File Number 05AX04001686 AM24

32

UDIN00085362AM26

Licence No and 0511021299/03/10/2023 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 62 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FEX FOUNDRY ALLOYS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006146AM24
RA File Number 05AX04001996 AM24
Licence No and<br>Date 0511021445/10/10/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 63 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name A-1 FENCE PRODUCTS COMPANY PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006674AM24
RA File Number 03AX04003471 AM24
Licence No and<br>Date 0311028524/07/11/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 64 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SUNDRAM FASTENERS LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

33

ts of TE.||

Case No. 64 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SUNDRAM FASTENERS LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

33

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00006892AM24
RA File Number 04AX04000716 AM24
Licence No and<br>Date 0411006419/17/11/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 65 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name KRISHCA STRAPPING SOLUTIONS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006928AM24
RA File Number 04AX04000724 AM24
Licence No and<br>Date 0411006434/20/11/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 66 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ANAND ENGINEERING PRODUCTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006930AM24
RA File Number 04AX04000713 AM24
Licence No and<br>Date 0411006436/20/11/2023

| |Meeting Number<br>and Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM APPLY 00006930AM24| |RA File Number|04AX04000713 AM24| |Licence No and<br>Date|0411006436/20/11/2023| |Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Gross input quantity of import item required, net weight of import item contained in each export<br>product and % wastage on net content basis.<br>I.<br>Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii)<br>remaining unused pieces.<br>II.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

34

UDIN00085362AM26

  • III. Blow-up diagram of export products made from import items covered under this license labeling parts with dimensions.

  • IV. GST invoice of scrap sale.

  • V. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • VI. Weight of each Export Product.

mensions.

  • IV. GST invoice of scrap sale.

  • V. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • VI. Weight of each Export Product.

  • VII. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • VIII. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

The case stands deferred.

factured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

The case stands deferred.

Case No. 67 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name V B HOLDING PRIVATE LIMITED
Meeting Number and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007005AM24
RA File Number 02AX04000495 AM24
Licence No and Date 0211005476/23/11/2023
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 02.05.2025, as under:<br>SL<br>No<br>ITEM<br>OF<br>EXPORT<br>QUANTITY ITEM<br>OF<br>IMPORT<br>WASTAGE/RECOMMENDATION<br>1<br>Lead<br>Ingot<br>99.97<br>PERCENT<br>purity<br>1000.00 MTS<br>Lead<br>Scrap,<br>namely<br>ISRI<br>RAILS<br>6% ON THE NET CONTENTOF<br>LEAD IN THE EXPORT PRODUCT<br>**NOTE:**The Company has to produce a Certificate of Analysis (COA) from the Customs

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company has to produce a Certificate of Analysis (COA) from the Customs

35

UDIN00085362AM26

per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company has to produce a Certificate of Analysis (COA) from the Customs

35

UDIN00085362AM26

Authorized laboratory/Supplier on the net content of lead in the imported item and also Consent to Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap (RAILS) for manufacturing of lead ingots, to the RA concerned.
Case No. 68 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MITUL INDUSTRIES
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007022AM24
RA File Number 05AX04002537 AM24
Licence No and<br>Date 0511022247/24/11/2023
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 69 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MAA PANEL (INDIA) PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007376AM24
RA File Number 08AX04001704 AM24
Licence No and<br>Date 0811010245/13/12/2023
Norms Committee Decision:<br>Case deferred for the comments of TE
Case No. 70 / NC/2/MEET/Apr/202526/2
Case Status Case Approved

36

UDIN00085362AM26

0811010245/13/12/2023| |Norms Committee Decision:<br>Case deferred for the comments of TE||

Case No. 70 / NC/2/MEET/Apr/202526/2
Case Status Case Approved

36

UDIN00085362AM26

Party Name KARAMTARA ENGINEERING LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006895AM25
RA File Number 03AX04004211 AM24
Licence No and<br> 0311029407/18/12/2023
Date
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to modify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47014/16/2023-TSW dated 30.04.2025, as under:
ITCHS co<br>I. de of import item atSNo.3namely, "Unwrought Zinc" in the above - mentioned A.A. may
<br>be amende<br>NC-2 mee <br>d from "79012090" to '79011200.Norms for the A.A. shall remain the same as ratified in<br>ting No.NC/2/MEET/Dec/202324/17dated03.01.2024.
R A concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to modify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47014/16/2023-TSW dated 30.04.2025, as under:

  • I. ITCHS code of import item at SNo.3 namely, "Unwrought Zinc" in the above - mentioned A.A. may be amended from " 79012090" to '79011200 .Norms for the A.A. shall remain the same as ratified in NC-2 meeting No. NC/2/MEET/Dec/202324/17 dated 03.01.2024.

e above - mentioned A.A. may be amended from " 79012090" to '79011200 .Norms for the A.A. shall remain the same as ratified in NC-2 meeting No. NC/2/MEET/Dec/202324/17 dated 03.01.2024.

Case No. 71 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name KRYSTAL GLOBAL ENGINEERING LIMITED
Meeting Number NC/ 2/ MEET/ Ar/ 202526/ 2 and 02/05/2025
and Date p
HQ File Number HQRNORM APPLY 00007468AM24
RA File Number 34AX04000674 AM24
Licence No and 3411004445/19/12/2023
Date
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 72 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name HINDALCO INDUSTRIES LIMITED
Meeting Number NC/ 2/ MEET/ Ar/ 202526/ 2 and 02/05/2025
and Date p
HQ File Number HQRNORM REVIW00006449AM25

37

UDIN00085362AM26

RA File Number 02AX04000562 AM24
Licence No and
Date 0211005649/29/12/2023
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 73 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BRIGHT METALS (INDIA) PRIVATE LIMITED
Meeting Number
and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007875AM24
RA File Number 13AX04000293 AM24
Licence No and
Date 1311002489/10/01/2024
Norms Committee Decision:
Case deferred for the comments of TE.

ile Number|HQRNORM APPLY 00007875AM24| |RA File Number|13AX04000293 AM24| |Licence No and|| |Date|1311002489/10/01/2024| |Norms Committee|Decision:| |Case deferred for|the comments of TE.| ||| |||

Case No. 74 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STAR EXPORTS
Meeting Number
and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007879AM24
RA File Number 03AX04004446 AM24
Licence No and
Date 0311030086/10/01/2024
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 75 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TRONTEK ELECTRONICS LIMITED

38

UDIN00085362AM26

Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007904AM24
RA File Number 05AX04003181 AM24
Licence No and<br>Date 0511023205/11/01/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Weight of each Export Product.<br>I.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated.

input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>II.<br>Technical write-up on manufacture of export product.<br>III.<br>Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export<br>product specification output.<br>IV.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • IV. Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export product specification output.

s other than the license, if any, may also be indicated.

  • IV. Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export product specification output.
Case No. 76 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TRONTEK ELECTRONICS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007931AM24
RA File Number 05AX04003187 AM24
Licence No and<br>Date 0511023227/12/01/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Weight of each Export Product.<br>I.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>II.

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of

39

UDIN00085362AM26

material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • III. Technical write-up on manufacture of export product.

be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • III. Technical write-up on manufacture of export product.

  • IV. Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export product specification output.

  • V. Reason as to why import requirements of cell (of same specification) per unit of export product (of same specification) are different in cases of AA Nos. 0511023227 and 0511024864.

The case stands deferred.

Case No. 77 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name FEX FOUNDRY ALLOYS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00007943AM24
RA File Number 05AX04003161 AM24
Licence No and<br>Date 0511023232/12/01/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 78 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MERO ASIA PACIFIC ENGINEERING PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00002770AM25
RA File Number 04AX04000907 AM24
Licence No and<br>Date 0411006749/22/01/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

40

UDIN00085362AM26

REVIW00002770AM25| |RA File Number|04AX04000907 AM24| |Licence No and<br>Date|0411006749/22/01/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

40

UDIN00085362AM26
Case No. 79 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008123AM24
RA File Number 03AX04004831 AM24
Licence No and<br>Date 0311030383/23/01/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. Case No. Case No. Case No. 80 / NC/2/MEET/Apr/202526/2 80 / NC/2/MEET/Apr/202526/2 80 / NC/2/MEET/Apr/202526/2 80 / NC/2/MEET/Apr/202526/2 80 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name JAIN GREEN TECHNOLOGIES PRIVATE LIMITED
Meeting Number an<br>Dt d NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
ae
HQ File Number HQRNORM APPLY 00008135AM24
RA File Number 04AX04000908 AM24
Licence No and Da te 0411006764/24/01/2024
Norms Committee<br>The Committee c Decision:<br>onsidered the case as per agenda and decided to ratify the ad-hoc norms as per comments
<br>of consultant (SKB) dated 01.05.2025, as under:<br>SL<br>EXPORT<br> ITEM<br>OF<br>WASTAGE<br>TO
SL EXPORT ITEM<br>OF <br>WASTAGE<br>TO

of consultant (SKB) dated 01.05.2025, as under:<br>SL<br>EXPORT<br> ITEM<br>OF<br>WASTAGE<br>TO||||||||| ||SL||EXPORT|||ITEM<br>OF|<br>WASTAGE<br>TO|| ||NO||ITEM||QUANTITY|<br>IMPORT|BE ALLOWED|| ||||||||WASTAGE @1%<br>ON<br>THE<br>NET|| |||||||Aluminium<br>Ingots (Avg AI|<br>CONTENT<br>OF<br> <br>|<br>| ||||Aluminium<br>Alloy<br>Ingots|||<br>Content 90%)|<br>ALUMINIUM<br>IN<br>THE<br>EXPORT|<br>| ||||<br> <br>(Avg<br>AI||<br> <br>1000000.00||<br> <br>PRODUCT.|| ||||Content 95%)<br>(Avg<br>Silicon<br>||<br> <br>KGS|||| |||||||||| ||||Content 5%)||||WASTAGE @2%<br>ON<br>THE<br>NET|| |||||||Silicon Metal|<br> <br> <br>CONTENT<br>OF|<br>| |||||||||| ||||||||||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

41

UDIN00085362AM26

SILICON IN THE EXPORT PRODUCT.

Note: The Company has to produce a certificate of analysis (COA) from the customs authorized laboratory/supplier on the net content of aluminium in the imported item and also consent to operate from MOEF &CC/CPCB/SPCB for processing of aluminium ingots for manufacturing of aluminium alloy ingots, to the RA concerned.

t content of aluminium in the imported item and also consent to operate from MOEF &CC/CPCB/SPCB for processing of aluminium ingots for manufacturing of aluminium alloy ingots, to the RA concerned.

Case No. 81 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name HINDALCO INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00006374AM25
RA File Number 02AX04000630 AM24
Licence No and<br>Date 0211005829/25/01/2024
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 82 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008182AM24
RA File Number 03AX04004872 AM24
Licence No and<br>Date 0311030482/29/01/2024
Norms Committee Decision:

42

UDIN00085362AM26

Case No. 83 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ASR MET TECH PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00005902AM25
RA File Number 08AX04001952 AM24
Licence No and<br>Date 0811010620/31/01/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

| |HQ File Number|HQRNORM REVIW00005902AM25| |RA File Number|08AX04001952 AM24| |Licence No and<br>Date|0811010620/31/01/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 84 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STAR EXPORTS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008279AM24
RA File Number 03AX04004934 AM24
Licence No and<br>Date 0311030606/01/02/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 85 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STAR EXPORTS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008281AM24
RA File Number 03AX04004938 AM24

43

UDIN00085362AM26

Licence No and 0311030609/01/02/2024 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 86 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BIRLA COPPER ASOJ PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008298AM24
RA File Number 34AX04000714 AM24
Licence No and<br>Date 3411004574/02/02/2024
Norms Committee Decision:
Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00008298AM24| |RA File Number|34AX04000714 AM24| |Licence No and<br>Date|3411004574/02/02/2024| |Norms Committee Decision:|| |Case deferred for the comments of TE.||

Case No. 87 / NC/2/MEET/Apr/202526/2 87 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name SI PRECISION
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00008352AM24
RA File Number 04AX04000985 AM24
Licence No and<br>Date 0411006834/05/02/2024
Norms Committee Decision:
The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments
of consultant (SKB) dated 02.05.2025, as under:
SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND<br>QUANTITY APPLIED <br>QUANTITY AND<br>WASTAGE<br>TO<br>BE ALLOWED <br>
SHAFT<br>BUTTERFLY STAINLESS STEEL ROUND <br>155.24 KG
1 3164038-2-SI. 29.75 KGS BAR, CRES 17-4PH AMS <br>INCLUSIVE OF
5643 DIA 0.625". OR DIA 0.5” 491.39%

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 02.05.2025, as under:

44

UDIN00085362AM26

5”|491.39%|||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 02.05.2025, as under:

44

UDIN00085362AM26

WASTAGE ON
THE NET
WEIGHT OF
EXPORT
PRODUCT AFTER
TAKING 15%
RECOVERY
FROM THE
WASTAGE.
81.30 KG
INCLUSIVE OF
442% WASTAGE
STAINLESS STEEL ROUND <br>ON<br>THE NET
2 CAM SERVO 63000389-<br>3-SI 37.50 KGS BAR, 17- 4PH AMS 5643 DIA<br>1.5” OR DIA 1.625". <br>WEIGHT<br>OF<br>EXPORT<br>PRODUCT AFTER
TAKING 15%
RECOVERY
FROM THE
WASTAGE.
615.28 KG
INCLUSIVE OF
446.91%
WASTAGE ON
3 PLATE<br>BUTTERFLY<br>7206795-1-SI <br>225.00 KGS STAINLESS STEEL ROUND<br>BAR, 15-5 PH AMS 5659 DIA<br>6.00". <br> <br>THE<br>NET<br>WEIGHT<br>OF<br>EXPORT<br>PRODUCT AFTER
TAKING 15%
RECOVERY
FROM THE
WASTAGE.

Note: The grade of imported stainless steel round bars should be matched with the grade of stainless steel of the export product.

Case No. 88 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PARAS LAMINATES PRIVATE LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

45

UDIN00085362AM26

88 / NC/2/MEET/Apr/202526/2| |---|---| |Case Status|Case Deferred| |Party Name|PARAS LAMINATES PRIVATE LIMITED| |Meeting Number|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025|

45

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00008555AM24
RA File Number 05AX04003512 AM24
Licence No and<br>Date 0511023948/13/02/2024
Norms Committee Decision:
Case deferred for the comments of TE.
and Date and Date
HQ File Number HQRNORM APPLY 00008555AM24
RA File Number 05AX04003512 AM24
Licence No and<br> 0511023948/13/02/2024
Date
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 89 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name GRIPON FASTENERS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00009027AM24
RA File Number 03AX04005680 AM24
Licence No and<br> 0311031986/11/03/2024
Date
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:
Weight of<br>I. each Export Product.
<br>Weight of<br>material b<br>II. <br>each of the imported and indigenous input, separately for each product, for the purpose of<br>alancing.

||||||||| |Weight of<br>I.||each Export Product.|||||| |<br>Weight of<br>material b<br>II.||<br>each of the imported and indigenous input, separately for each product, for the purpose of<br>alancing. Net weight (Gross weight minus wastage) for each imported and indigenous input|||||| |<br>in the exp||<br>ort product may be indicated. Net weight along with details of other imported input to be|||||| |<br>used in the||<br>resultant product and sought to be imported/procured from sources other than the license,|||||| |<br>if any, ma<br>Starting fr<br>III.||<br>y also be indicated.<br>om the specification of the export product, basic calculation as to how of raw material|||||| |<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>The case stands deferred.|||||||| ||The c||ase stands deferre|d.|||| ||||||||| ||||||||| |Case No.||90 / N|C/2/MEET/Apr/20|2526/2|||| |||||||||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

/MEET/Apr/20|2526/2|||| |||||||||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • III. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case No. 90 / NC/2/MEET/Apr/202526/2

46

UDIN00085362AM26

Case Status<br> Case Deferred
Party Name<br> RAM RATNA INTERNATIONAL
Meeting Number<br>and Date<br> NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number<br> HQRNORM APPLY 00009090AM24
RA File Number<br> 03AX04005609 AM24
Licence No and<br>Date<br> 0311032136/14/03/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

mber<br>|HQRNORM APPLY 00009090AM24| |RA File Number<br>|03AX04005609 AM24| |Licence No and<br>Date<br>|0311032136/14/03/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 91 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name M S N EXPORTS
Meeting Number and<br>Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00009189AM24
RA File Number 04AX04001056 AM24
Licence No and Date 0411007120/18/03/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of consultant (SKB) dated 01.05.2025, as under:<br>SL No<br>ITEM OF EXPORT<br>QUANTITY<br>ITEM OF IMPORT<br>WASTAGE TO BE<br>ALLOWED<br>ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW518<br>MILL-FINISH,<br>THICKNESS<br>0.7<br>(MM),<br>LENGTH 3.6(METER)<br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW518<br>ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW519<br>MILL-FINISH,<br>THICKNESS<br>0.7<br>(MM),<br>LENGTH 3.6(METER)<br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW519<br>ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW520<br>MILL-FINISH,<br>THICKNESS<br>0.7<br>(MM),<br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>1<br>ALUMINIUM DAMPER<br>920.00 KGS

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

47

<br>ALUMINIUM DAMPER<br>920.00 KGS||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 01.05.2025, as under:

47

UDIN00085362AM26

LENGTH 3.6(METER) PROFILE RW520
2 ALUMINIUM<br>SINGLE<br>DEFLECTION GRILLE <br>6500.00 KGS ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW522<br>MILL-FINISH,<br>THICKNESS<br>0.9<br>(MM),<br>LENGTH 3.6(METER) <br> <br> <br> <br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW524
ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW523<br>MILL-FINISH,<br>THICKNESS<br>0.7<br>(MM),<br>LENGTH 3.6(METER) <br> <br> <br> <br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW523
3 ALUMINIUM<br>4-WAY<br>SQUARE DIFFUSER <br>3580.00 KGS ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW521<br>MILL-FINISH,<br>THICKNESS<br>1.0<br>(MM),<br>LENGTH 3.6(METER) <br> <br> <br> <br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW521
ALUMINIUM<br>PROFILE<br>SECTION<br>NUMBER<br>RW524<br>MILL-FINISH,<br>THICKNESS<br>0.8<br>(MM),<br>LENGTH 3.6(METER) <br> <br> <br> <br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW524

N<br>NUMBER<br>RW524<br>MILL-FINISH,<br>THICKNESS<br>0.8<br>(MM),<br>LENGTH 3.6(METER)|<br> <br> <br> <br>WASTAGE<br>@2%<br>OF<br>THE<br>NET<br>WEIGHT<br>OF<br>ALUMINIUM<br>PROFILE RW524|

Case No.<br> 92 / NC/2/MEET/Apr/202526/2
Case Status<br> Case Deferred
Party Name<br> VISIONOVA MULTISOURCE PRIVATE LIMITED
Meeting Number<br>and Date<br> NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number<br> HQRNORM APPLY 00009355AM24
RA File Number<br> 33AX04000127 AM24
Licence No and<br>Date<br> 3311001829/27/03/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

48

UDIN00085362AM26

Case No. 93 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name JASMINO CORPORATION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000298AM26
RA File Number 03AX04006017 AM24
Licence No and<br>Date 0311032596/28/03/2024

D| |Meeting Number<br>and Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM REVIW00000298AM26| |RA File Number|03AX04006017 AM24| |Licence No and<br>Date|0311032596/28/03/2024| |Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of consultant (SKB) dated 02.05.2025, as under:<br>ITEM OF EXPORT:<br>Fabricated Rubber-lined painted spools (as per General Note 4 of Engineering Products- Import<br>Item SR.NO 16 to 98, 100 to 106 & 111 to 118 Content on Net to Net Basis in export Item)<br>QTY: 1837 NOS<br>ITEM OF IMPORT<br>Item of import at Sl No 99: Seamless pipe PE SRL 1" S160 A106B EN10204/3.1<br>1.<br>Item of import at Sl No 1 to 2: Seamless pipe PE SRL 1 1/2" S160 A106B EN10204/3.1<br>2.<br>Item of Import at Sl No 3 to 4 & 107: Seamless pipe BE DRL 2" S80 API 5L Grade B PSL 2<br>EN10204/1<br>3.<br>Item of import at Sl No 5 to 9 & 108: Seamless pipe BE DRL 3" S80 A106B EN10204/3.1<br>4.<br>Item of import at Sl No 10 to 11& 109: Seamless pipe BE DRL 4" S40 A106B EN10204/3.1<br>5.<br>Item of import at Sl No 12: Seamless pipe BE DRL 6" S40 API 5L Grade B PSL 2 EN10204/3.1<br>6.<br>Item of import at Sl No 13 to 14 & 110: Seamless pipe BE DRL 8" S30 A106B EN10204/3.1.<br>7.<br>Item of import at Sl No 15: Seamless pipe BE DRL 10" S30 A106B EN10204/3.1<br>8.<br>Wastage to be allowed:<br>For Seamless Pipes fromSI.No 1 to 15, 99, 107 to 110:1.05 Kg/Kgon the net weight of the pipe in<br>the export product.<br>I.<br>For import items at**Sl.

br>8.<br>Wastage to be allowed:<br>For Seamless Pipes fromSI.No 1 to 15, 99, 107 to 110:1.05 Kg/Kgon the net weight of the pipe in<br>the export product.<br>I.<br>For import items atSl. No 16 to 106 (Excluding Sl. No 99), and 111 to 118(Elbow, Flange, Equal<br>Tee, Reducing Tee, Concentric Reducer, and eccentric reducer):Net to Net under GN-4with<br>accountability clause.<br>II.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 02.05.2025, as under:

Fabricated Rubber-lined painted spools (as per General Note 4 of Engineering Products- Import Item SR.NO 16 to 98, 100 to 106 & 111 to 118 Content on Net to Net Basis in export Item)

  1. Item of Import at Sl No 3 to 4 & 107: Seamless pipe BE DRL 2" S80 API 5L Grade B PSL 2 EN10204/1

  • I. For Seamless Pipes from SI.No 1 to 15, 99, 107 to 110 : 1.05 Kg/Kg on the net weight of the pipe in the export product.

  • II. For import items at Sl. No 16 to 106 (Excluding Sl. No 99), and 111 to 118 (Elbow, Flange, Equal Tee, Reducing Tee, Concentric Reducer, and eccentric reducer): Net to Net under GN-4 with accountability clause.

49

UDIN00085362AM26

Note : The grade and size of the imported seamless pipes should match those of the pipes in the export product.

Net to Net under GN-4 with accountability clause.

49

UDIN00085362AM26

Note : The grade and size of the imported seamless pipes should match those of the pipes in the export product.

Case No. 94 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ASB TUBES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000034AM25
RA File Number 08AX04002265 AM24
Licence No and<br>Date 0811011188/02/04/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 95 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TRONTEK ELECTRONICS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000089AM25
RA File Number 05AX04004100 AM24
Licence No and<br>Date 0511024864/04/04/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Weight of each Export Product.<br>I.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>II.

cing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>II.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be

50

UDIN00085362AM26

used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • III. Technical write-up on manufacture of export product.

  • IV. Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export product specification output.

  • V. Reason as to why import requirements of cell (of same specification) per unit of export product (of same specification) are different in cases of AA Nos. 0511023227 and 0511024864.

The case stands deferred.

o why import requirements of cell (of same specification) per unit of export product (of same specification) are different in cases of AA Nos. 0511023227 and 0511024864.

The case stands deferred.

Case No. 96 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PASONDIA CABLES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000128AM25
RA File Number 05AX04004092 AM24
Licence No and<br>Date 0511024898/05/04/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 97 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name MAYUR INDUSTRIES
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000331AM25
RA File Number 05AX04000172 AM25
Licence No and<br>Date 0511025070/19/04/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

51

UDIN00085362AM26

Case No. 98 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000414AM25
RA File Number 05AX04002114 AM24
Licence No and<br>Date 0511025153/24/04/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000414AM25| |RA File Number|05AX04002114 AM24| |Licence No and<br>Date|0511025153/24/04/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 99 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name VINAYAKA INDUSTRIAL ENTERPRISES,
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000519AM25
RA File Number 07AX04000148 AM25
Licence No and<br>Date 0711011211/02/05/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 100 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BRIGHT METALS (INDIA) PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000590AM25
RA File Number 13AX04000032 AM25
Licence No and<br>Date 1311002994/07/05/2024
Norms Committee Decision:

52

UDIN00085362AM26

Case No. 101 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SANKALP BARRELS LLP
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000630AM25
RA File Number 08AX04000097 AM25
Licence No and<br>Date 0811011492/09/05/2024
Norms Committee Decision:
Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000630AM25| |RA File Number|08AX04000097 AM25| |Licence No and<br>Date|0811011492/09/05/2024| |Norms Committee Decision:|| |Case deferred for the comments of TE.||

Case No. 102 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TRONTEK ELECTRONICS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000632AM25
RA File Number 05AX04000381 AM25
Licence No and<br>Date 0511025403/09/05/2024
Norms Committee Decision:
The Committee considered the case as per agenda and decided to ask the applicant to furnish the following
information/documents as per comments given by the TE:
Weight of<br>I. each Export Product.
Weight of<br>II. each of the imported and indigenous input, separately for each product, for the purpose of
material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input
in the export product may be indicated. Net weight along with details of other imported input to be
used in the resultant product and sought to be imported/procured from sources other than the license,
if any, may also be indicated.
Copy of application.<br>III.
Rating of Export product with complete specifications<br>IV.

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

complete specifications<br>IV.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

53

UDIN00085362AM26

  • V. Technical write-up on manufacture of export product.

  • VI. Cell ratings with voltage, current capacity, cell arrangement justifying import requirement for export product specification output.

The case stands deferred.

Case No. 103 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHIVALIK BIMETAL CONTROLS LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000738AM25
RA File Number 05AX04000292 AM25
Licence No and<br>Date 0511025541/15/05/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000738AM25| |RA File Number|05AX04000292 AM25| |Licence No and<br>Date|0511025541/15/05/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 104 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STEEL INFRA SOLUTIONS COMPANY LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001115AM25
RA File Number 50AX04000024 AM25
Licence No and<br>Date 5011001429/05/06/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 105 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred

54

UDIN00085362AM26

Party Name PARVEEN INDUSTRIES PVT LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001209AM25
RA File Number 03AX04001006 AM25
Licence No and<br>Date 0311034473/10/06/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00001209AM25| |RA File Number|03AX04001006 AM25| |Licence No and<br>Date|0311034473/10/06/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 106 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name NORDEX INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001294AM25
RA File Number 07AX04000399 AM25
Licence No and<br>Date 0711011559/13/06/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (TEC-1) dated 01.05.2025, as under:<br>ITEM OF EXPORT<br>BLADE 77.5 V2(PART FOR WIND OPERATED ELECTRICITY GENERATOR (WOEGS)((<br>TOTAL 39 NOS) TOTAL EXPORT ITEM WEIGHT OF9,43,885 KG +/-1%<br>ITEM OF IMPORT<br>IMPORT ITEMS AT S.NO. 15-20,30-35 ARE COMPONENTS AND MAY BE ALLOWED AS<br>PER GN 4<br>1.<br>REST OF ITEMS MAY BE ALLOWED AS APPLIED FOR.<br>2.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (TEC-1) dated 01.05.2025, as under:

  1. IMPORT ITEMS AT S. NO. 15-20,30-35 ARE COMPONENTS AND MAY BE ALLOWED AS PER GN 4
Case No. 107 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED

55

UDIN00085362AM26

S AND MAY BE ALLOWED AS PER GN 4**

Case No. 107 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED

55

UDIN00085362AM26

Meeting Number<br>and Date<br>NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number<br>HQRNORM APPLY 00001351AM25
RA File Number<br>08AX04000336 AM25
Licence No and<br>Date<br>0811011843/15/06/2024
Norms Committee Decision:
The Committee considered the case as per agenda and noted that a deficiency letter was issued to the
applicant on 05.12024 and a reminder has been sent on 20.11.2024 for furnishing information/documents.
The reply is still awaited. As the furnished document is not according to the DL given to the firm. The
Committee, therefore, decided to send afinal reminderto the applicant to submit the requisite information
within 15 days on DGFT BO Portal; failing which the case will be rejected without further notice.
The case stands deferred.

The Committee considered the case as per agenda and noted that a deficiency letter was issued to the applicant on 05.12024 and a reminder has been sent on 20.11.2024 for furnishing information/documents. The reply is still awaited. As the furnished document is not according to the DL given to the firm. The Committee, therefore, decided to send a final reminder to the applicant to submit the requisite information within 15 days on DGFT BO Portal; failing which the case will be rejected without further notice.

herefore, decided to send a final reminder to the applicant to submit the requisite information within 15 days on DGFT BO Portal; failing which the case will be rejected without further notice.

Case No. 108 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ESCO PIPES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001578AM25
RA File Number 10AX04000039 AM25
Licence No and<br>Date 1011002505/27/06/2024
Norms Committee Decision:
The Committee considered the case as per agenda and decided to ask the applicant to furnish the following
information/documents as per comments given by the TE:
A copy of<br>I. Advance Authorization (as there is no list of export and import items in the application).
Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>II.
furnished.
Weight of<br>III. each Export Product.
Weight of<br>IV. each of the imported and indigenous input, separately for each product, for the purpose of
material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input
in the export product may be indicated.

input, separately for each product, for the purpose of| |material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input|| |in the export product may be indicated. Net weight along with details of other imported input to be|| |used in the resultant product and sought to be imported/procured from sources other than the license,|| |if any, may also be indicated.|| |Starting from the specification of the export product, basic calculation as to how of raw material<br>V.|| |proposed for import has been arrived at, including the net weight of components to be manufactured||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • IV. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • V. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured

56

UDIN00085362AM26

cation of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured

56

UDIN00085362AM26

out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

The case stands deferred.

Case No. 109 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHIVALIK BIMETAL CONTROLS LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001601AM25
RA File Number 05AX04000874 AM25
Licence No and<br>Date 0511026341/27/06/2024
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 110 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name RAM RATNA INTERNATIONAL
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001614AM25
RA File Number 03AX04001547 AM25
Licence No and<br>Date 0311035021/28/06/2024
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 111 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SAMS PRECISION COMPONENTS

57

UDIN00085362AM26

ecision:|| |Case deferred for the comments of TE.||

Case No. 111 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SAMS PRECISION COMPONENTS

57

UDIN00085362AM26

Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001677AM25
RA Fil Nb 04AX04000193 AM25
e umer
Li N d
cence o an<br>Date 0411007658/02/07/2024
Norms Committee Decision:
The Committee c onsidered the case as per agenda and decided to ask the applicant to furnish the following
information/docu ments as per comments given by the TE:
Catalogue<br>I.<br> /photograph of export products.<br>
Specific details of import items, their quantity in numbers & weight along with their dimensions and<br>CIF values of import.<br>II.<br>Process flow chart includes manufacturing operations such as cutting, CNC turnings, drilling,<br>deburring etc but in Appendix 4E wastage indicated is NA and hence clarification thereof<br>III.
. .. .<br>In application import is mentioned in weight (1.8 MT for 12000 nos. of export products) but in<br>Appendix 4E quantity required for each export product is mentioned in numbers (1200 Nos. and<br>hence clarification for the inconsistency.<br>IV.<br>Net wt.

r 12000 nos. of export products) but in<br>Appendix 4E quantity required for each export product is mentioned in numbers (1200 Nos. and<br>hence clarification for the inconsistency.<br>IV.<br>Net wt. of import items contained in each export product and corresponding gross input weight and<br>V.|| |<br>wastage th|<br>ereof.| |<br>GST invoi<br>VI.|<br>ce of scrap sale.| |Detail tec<br>VII.|hnical drawings with dimension of each export product, Catalogue, if any, may also be| |furnished.<br>Weight of<br>VIII.|each Export Product.| |<br>Weight of<br>IX.|<br>each of the imported and indigenous input, separately for each product, for the purpose of| |material b|alancing. Net weight (Gross weight minus wastage) for each imported and indigenous input| |in the exp<br>used in the|ort product may be indicated. Net weight along with details of other imported input to be<br>resultant product and sought to be imported/procured from sources other than the license,| |if any, may also be indicated.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>X.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

X.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Specific details of import items, their quantity in numbers & weight along with their dimensions and CIF values of import.

  • III. Process flow chart includes manufacturing operations such as cutting, CNC turnings, drilling, deburring etc. but in Appendix 4E wastage indicated is N.A. and hence clarification thereof.

  • IV. In application import is mentioned in weight (1.8 MT for 12000 nos. of export products) but in Appendix 4E quantity required for each export product is mentioned in numbers (1200 Nos. and hence clarification for the inconsistency.

  • V. Net wt. of import items contained in each export product and corresponding gross input weight and wastage thereof.

  • VII. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • IX. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

ted. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • X. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
Case No. 112 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001722AM25
RA File Number 03AX04001346 AM25

58

UDIN00085362AM26

Licence No and 0311035170/03/07/2024 Date Norms Committee Decision:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/3/2019-TSW dated 20.01.2025, as under:

  • I. Net weight of export items at SNo.1 & 2 may be specified as 3708.4 MT & 1075 MT respectively.

  • II. Quantity of import item at SI.No.1 (i.e. Aluminium Wire Rod) may be allowed as 1.01 Kgs/Kg content in the export item at SI No. 1.

  • III. Quantity of import item at SI.No.2 (i.e. High Carbon Steel Wire/Rod) may be allowed as 1.02 Kgs/Kg content in the export item at SI No.1.

nt in the export item at SI No. 1.

  • III. Quantity of import item at SI.No.2 (i.e. High Carbon Steel Wire/Rod) may be allowed as 1.02 Kgs/Kg content in the export item at SI No.1.

  • IV. Quantity of import item at SI.No.3 (i.e. Zinc) may be allowed as 4% weight of the steel in the export item at SI No.1.

  • V. Quantity of import item at SI.No.4 (i.e. Aluminium Ingot) may be allowed as 1.02 Kgs/Kg content in the export item at SI No.2.

  • VI. Quantity of import item at SI.No.5 (i.e. ACCC Composite Core) may be allowed as 1.01 Kgs/Kg content in the export item at SI No.2 as claimed by the firm.

Case No. 113 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name Techno Flex
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001804AM25
RA File Number 56AX04000095 AM25
Licence No and<br>Date 5611003073/08/07/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

Case No. 114 / NC/2/MEET/Apr/202526/2

59

UDIN00085362AM26

04000095 AM25| |Licence No and<br>Date|5611003073/08/07/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 114 / NC/2/MEET/Apr/202526/2

59

UDIN00085362AM26

Case Status Case Deferred
Party Name RECONS POWER EQUIPMENTS PRIVATE LIMITED
Meeting Number<br> NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
and Date
HQ File Number HQRNORM APPLY 00001819AM25
RA File Number 05AX04001109 AM25
Licence No and<br>Date 0511026570/08/07/2024
Norms Committee Decision:
The Committee c onsidered the case as per agenda and decided to ask the applicant to furnish the following
information/docu<br> <br> ments as per comments given by the TE:<br>
The descri<br>I.<br> <br> ption of the export item is the same as that of the import item, hence clarification thereof.<br>
Details of<br><br>II. indigenous items proposed to be used in the manufacture of the export product may be
provided.<br>Weight of<br>III.<br> <br> each Export Product.<br>
Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license<br>IV.
,<br>if any, may also be indicated.<br>The case stands deferred.

ted input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license<br>IV.|| |,<br>if any, may also be indicated.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Details of indigenous items proposed to be used in the manufacture of the export product may be provided.

  • IV. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
Case No. 115 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STERLITE POWER TRANSMISSION LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001924AM25
RA File Number 03AX04001774 AM25
Licence No and<br>Date 0311035474/15/07/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 116 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred

60

UDIN00085362AM26

5474/15/07/2024| ||| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 116 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred

60

UDIN00085362AM26

Party Name TPI COMPOSITES INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00001950AM25
RA File Number 04AX04000305 AM25
Licence No and<br>Date 0411007798/16/07/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 117 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PRECISION DRAWELL PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002065AM25
RA File Number 50AX04000051 AM25
Licence No and<br>Date 5011001505/23/07/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 118 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SHAH FOILS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002142AM25
RA File Number 08AX04000643 AM25
Licence No and<br>Date 0811012206/25/07/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

61

UDIN00085362AM26

APPLY 00002142AM25| |RA File Number|08AX04000643 AM25| |Licence No and<br>Date|0811012206/25/07/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

61

UDIN00085362AM26

Case No. 119 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SI PRECISION
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002149AM25
RA File Number 04AX04000350 AM25
Licence No and<br>Date 0411007886/26/07/2024
Norms Committee Decision:
Case deferred for the comments of TE.
Case No.<br>120 / NC/2/MEET/Apr/202526/2
Case Status<br>Case Deferred
Party Name<br>CABLEX CONNECTIVITY SOLUTIONS INDIA PRIVATE LIMITED
Meeting Number<br>and Date<br>NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number<br>HQRNORM APPLY 00002206AM25
RA File Number<br>31AX04000126 AM25
Licence No and<br>Date<br>3111003737/30/07/2024
Norms Committee Decision:
The Committee considered the case as per agenda and decided to ask the applicant to furnish the following
information/documents as per comments given by the TE:
A copy of Advance Authorization (as there is no list of export and import items the application).<br>I.
Basis/justification for the quantities of import items.<br>II.
Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>III.
furnished.
Information about the inputs required per unit of the resultant product as per Sl. No.

technical drawings with dimension of each export product, Catalogue, if any, may also be<br>III.| |furnished.| |Information about the inputs required per unit of the resultant product as per Sl. No. 1 of Appendix-<br>IV.| |11A appearing in current HBP (Vol.I) separately for each product.| |Assembly drawings/diagrams of the resultant product showing placement and exact use of<br>V.| |components in the export product (s).| |Bifurcated quantities of components to be accounted for in the resultant product and the requirement<br>VI.| |of components as spares. Raw Material / Consumables.| |The case stands deferred.|

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • III. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • V. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).

  • VI. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables.

62

UDIN00085362AM26

oduct (s).

  • VI. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables.

62

UDIN00085362AM26

Case No. 121 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name WELSPUN CORP LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002220AM25
RA File Number 03AX04002147 AM25
Licence No and<br>Date 0311035948/30/07/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47011/221/2017-TSW dated 01.05.2025, as under:<br>Note: The written recommendation as given by (DPIIT) will be communicated to the<br>applicant as well as concerned RA through email.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/221/2017-TSW dated 01.05.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

Case No. 122 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name UNITECH ELECTRICAL INDUSTRIES
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002255AM25
RA File Number 10AX04000105 AM25
Licence No and<br>Date 1011002564/01/08/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (MHI) dated 30.04.2025, as under:<br>Note: The written recommendation as given by (MHI) will be communicated to the applicant<br>as well as concerned RA through email.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 30.04.2025, as under:

Note: The written recommendation as given by (MHI) will be communicated to the applicant as well as concerned RA through email.

63

UDIN00085362AM26

Case No. 123 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name CHHAPERIA CABLE MATERIAL PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002309AM25
RA File Number 07AX04000749 AM25
Licence No and<br>Date 0711012009/05/08/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47011/105/2024-TSW dated 02.05.2025, as under:<br>Export item to contain1, 59, 000 Kgs.of Aluminium Foil.<br>I.<br>Import item atSI No. 1shall be of relevant thickness as contained in the export item and its quantity<br>may be allowed as applied for i.e.1,59,159 Kgs.<br>II.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/105/2024-TSW dated 02.05.2025, as under:

  • II. Import item at SI No. 1 shall be of relevant thickness as contained in the export item and its quantity may be allowed as applied for i.e. 1,59,159 Kgs.

dated 02.05.2025, as under:

  • II. Import item at SI No. 1 shall be of relevant thickness as contained in the export item and its quantity may be allowed as applied for i.e. 1,59,159 Kgs.
Case No. 124 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TDK INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002510AM25
RA File Number 02AX04000307 AM25
Licence No and<br>Date 0211007086/13/08/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 125 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name RISHABH ENTERPRISES

64

UDIN00085362AM26

Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002520AM25
RA File Number 05AX04004004 AM24
Licence No and<br>Date 0511027159/14/08/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 126 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SMS INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002540AM25
RA File Number 02AX04000282 AM25
Licence No and<br>Date 0211007097/14/08/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00002540AM25| |RA File Number|02AX04000282 AM25| |Licence No and<br>Date|0211007097/14/08/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 127 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STOVE KRAFT LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002614AM25
RA File Number 07AX04000830 AM25
Licence No and<br>Date 0711012136/21/08/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

65

UDIN00085362AM26

Case No. 128 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name APAR INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002773AM25
RA File Number 34AX04000433 AM25
Licence No and<br>Date 3411005335/30/08/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 129 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SYRMA SGS TECHNOLOGY LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002786AM25
RA File Number 03AX04002618 AM25
Licence No and<br>Date 0311036798/02/09/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00002786AM25| |RA File Number|03AX04002618 AM25| |Licence No and<br>Date|0311036798/02/09/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 130 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name STAR EXPORTS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002787AM25
RA File Number 03AX04002647 AM25
Licence No and<br>Date 0311036800/02/09/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

66

UDIN00085362AM26

Case No. 131 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name SHIRDI SAI ELECTRICALS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002799AM25
RA File Number 09AX04000386 AM25
Licence No and<br>Date 0911007856/02/09/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (MHI) dated 01.05.2025, as under:<br>CRGO Silicon Electrical Steel Coils:218,507.3 Kg<br>I.<br>Import item atSI.No. 22: CRGO transformer laminations154 numbersmay be allowed as<br>component onnet-to-net basis under GN-4for manufacture of export product at SI.No.4.<br>II.<br>Aluminium Foil:131,456.7 Kg<br>III.<br>Transformer Oil:231,273 Kg<br>IV.<br>Other items may be allowed as components onnet-to-net basis under GN-4.<br>V.<br>RA concerned may take suitable consequential action accordingly.

<br>Transformer Oil:231,273 Kg<br>IV.<br>Other items may be allowed as components onnet-to-net basis under GN-4.<br>V.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 01.05.2025, as under:

  • II. Import item at SI.No. 22 : CRGO transformer laminations 154 numbers may be allowed as component on net-to-net basis under GN-4 for manufacture of export product at SI.No.4.
Case No. 132 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name WELSPUN CORP LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002805AM25
RA File Number 03AX04002717 AM25
Licence No and<br>Date 0311036829/03/09/2024
Norms Committee Decision:

67

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/221/2017-TSW dated 01.05.2025, as under:

  • I. Import item at SNO. 1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as applied for i.e. 6880.125 MT as 1.05 Kgs. /Kg content in the export item.

  • II. Quantity of import item at SI.No.2 may be allowed as applied for i.e. 27168.38 Kgs.

  • III. Quantity of import item a. Sl.No.3 may be allowed as applied for i.e. 19796.02 Kgs as 1.05 Kgs/Kg content in the export item.

  • may be allowed as applied for i.e. 27168.38 Kgs.

  • III. Quantity of import item a. Sl.No.3 may be allowed as applied for i.e. 19796.02 Kgs as 1.05 Kgs/Kg content in the export item.

  • IV. Quantity of import item at SI.No.4 may be allowed as 12513 Kgs as 1.05 Kgs/Kg content in the export item.

  • V. Quantity of import item at SI.No.5 may be allowed as 221860 Kgs as 1.05 Kgs/Kg content in the export item.

  • VI. Quantity of import item a. SI.No.6 may be allowed as applied for i.e. 9698.72 Kgs as 1.05 Kgs/Kg content in the export item.

  • VII. Quantity of import item at SI.No.7 may be allowed as 1.05 Sq.meters/Sq.meter content in the export item.

  • VIII. Quantity of import item at SI.No.8 may be allowed may be allowed up to 6% of FOB value of export item.

Case No. 133 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name OSWAL CABLES PVT LTD
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00002826AM25
RA File Number 13AX04000174 AM25
Licence No and<br>Date 1311003297/03/09/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47014/40/2023-TSW dated 03.04.2025, as under:<br>Note: The written recommendation as given by (DPIIT) will be communicated to the<br>applicant as well as concerned RA through email.

o. P-47014/40/2023-TSW dated 03.04.2025, as under:<br>Note: The written recommendation as given by (DPIIT) will be communicated to the<br>applicant as well as concerned RA through email.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47014/40/2023-TSW dated 03.04.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

68

UDIN00085362AM26

Case No. 134 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name KEY - TECH ENGINEERING CO.
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003065AM25
RA File Number 03AX04002774 AM25
Licence No and<br>Date 0311037161/16/09/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Quantity of export items in Nos. in addition to their weights.<br>I.<br>Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>furnished.<br>II.<br>Weight of each Export Product.<br>III.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated.

input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>IV.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>V.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • IV. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

ted. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • V. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
Case No. 135 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SARA SAE PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003104AM25
RA File Number 05AX04001859 AM25

69

UDIN00085362AM26

Licence No and 0511027767/17/09/2024 Date Norms Committee Decision: Case deferred for the comments of TE.

|HQRNORM APPLY 00003104AM25| |RA File Number|05AX04001859 AM25|

69

UDIN00085362AM26

Licence No and 0511027767/17/09/2024 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 136 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BORGWARNER EMISSIONS TALEGAON PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003236AM25
RA File Number 31AX04000152 AM25
Licence No and<br>Date 3111003905/24/09/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Generic name of the import item at S. No. 3.<br>I.<br>Import item at S. No. 3 has part no. but its UOM is in KG. Therefore, it needs to clarified whether it<br>is to be used as component or raw material for manufacture of export product.<br>II.<br>If import item at S. No. 3 is component, its quantity may be indicated in<br>III.<br>Numbers with quantitative justification.<br>IV.<br>If import item at S. No. 3 is to be used as raw material,, part of export product to be manufactured<br>from it, its gross input weight and net weight contained in export product.<br>V.<br>Detail technical note on manufacturing process including the relevant flow sheet.<br>VI.<br>Weight of each Export Product.<br>VII.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing.

he relevant flow sheet.<br>VI.<br>Weight of each Export Product.<br>VII.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>VIII.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>IX.<br>Labeled Blow-up diagram of export product showing the parts imported or<br>made from imported raw material.<br>X.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • II. Import item at S. No. 3 has part no. but its UOM is in KG. Therefore, it needs to clarified whether it is to be used as component or raw material for manufacture of export product.

  • V. If import item at S. No. 3 is to be used as raw material,, part of export product to be manufactured from it, its gross input weight and net weight contained in export product.

port product.

  • V. If import item at S. No. 3 is to be used as raw material,, part of export product to be manufactured from it, its gross input weight and net weight contained in export product.

  • VIII. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • IX. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

70

UDIN00085362AM26

Case No. 137 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name METACOOL PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003253AM25
RA File Number 05AX04001999 AM25
Licence No and<br>Date 0511027939/24/09/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00003253AM25| |RA File Number|05AX04001999 AM25| |Licence No and<br>Date|0511027939/24/09/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 138 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ADANI NEW INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003454AM25
RA File Number 37AX04000019 AM25
Licence No and<br>Date 0811012803/03/10/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 139 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name APAR INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003476AM25
RA File Number 03AX04003147 AM25
Licence No and<br>Date 0311037648/04/10/2024
Norms Committee Decision:

71

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/107/2019-TSW dated 03.04.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

Case No. 140 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SPIKEEL PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003480AM25
RA File Number 07AX04001057 AM25
Licence No and<br>Date 0711012485/04/10/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 141 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JINDAL SAW LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00003601AM25
RA File Number 05AX04002084 AM25
Licence No and<br>Date 0511028252/11/10/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 142 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred

72

UDIN00085362AM26

Party Name VIRAJ PROFILES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004144AM25
RA File Number 03AX04003630 AM25
Licence No and<br>Date 0311038699/14/11/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00004144AM25| |RA File Number|03AX04003630 AM25| |Licence No and<br>Date|0311038699/14/11/2024| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 143 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ZOBELE INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM REVIW00000266AM26
RA File Number 03AX04004296 AM25
Licence No and<br>Date 0311039046/26/11/2024
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 144 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name ANDRITZ HYDRO PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00004616AM25
RA File Number 56AX04000381 AM25
Licence No and<br>Date 5611003464/09/12/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (MHI) dated 01.05.2025, as under:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 01.05.2025, as under:

73

UDIN00085362AM26

  • I. 117,528 Kg of import item may be allowed inclusive of 29.5% wastage on net content basis after recovery.

s per comments of (MHI) dated 01.05.2025, as under:

73

UDIN00085362AM26

  • I. 117,528 Kg of import item may be allowed inclusive of 29.5% wastage on net content basis after recovery.
Case No. 145 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name APAR INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005045AM25
RA File Number 03AX04004867 AM25
Licence No and<br>Date 0311039879/25/12/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47011/107/2019-TSW dated 03.04.2025, as under:<br>Note: The written recommendation as given by (DPIIT) will be communicated to the<br>applicant as well as concerned RA through email.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/107/2019-TSW dated 03.04.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

vide U.O No. P-47011/107/2019-TSW dated 03.04.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

Case No. 146 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name NORDEX INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005071AM25
RA File Number 07AX04001504 AM25
Licence No and<br>Date 0711013155/26/12/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments

74

UDIN00085362AM26

of (Tec-1) dated 02.05.2025, as under:

ITEM OF EXPORT

AW3K_BLA_000001 (PART FOR WIND OPERATED ELECTRICITY GENERATOR (WOEGS) (( TOTAL 30 NOS ) TOTAL EXPORT ITEM WEIGHT OF 4, 72, 579 KG +/-1%

ITEM OF IMPORT

  1. IMPORT ITEMS AT S. NO. 9-14,24-26 ARE COMPONENTS AND MAY BE ALLOWED AS PER GN 4

  2. REST OF ITEMS MAY BE ALLOWED AS APPLIED FOR

Case No. 147 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ANAND ENGINEERING PRODUCTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00005261AM25
RA File Number 04AX04000937 AM25
Licence No and<br>Date 0411008811/31/12/2024
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Gross input quantity of import item required, net weight of import item contained in each export<br>product and % wastage on net content basis.<br>I.<br>Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii)<br>remaining unused pieces.<br>II.<br>Blow-up diagram of export products made from import items covered under this license labeling<br>parts with dimensions.<br>III.<br>GST invoice of scrap sale.<br>IV.<br>Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>furnished.<br>V.<br>Weight of each Export Product.<br>VI.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated.

input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>VII.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • I. Gross input quantity of import item required, net weight of import item contained in each export product and % wastage on net content basis.

  • II. Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii) remaining unused pieces.

  • III. Blow-up diagram of export products made from import items covered under this license labeling parts with dimensions.

  • V. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • VII. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

75

UDIN00085362AM26

h details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

75

UDIN00085362AM26

VIII. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

The case stands deferred.

Case No. 148 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name VALVEWORKS INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006050AM25
RA File Number 31AX04000425 AM25
Licence No and<br>Date 3111004406/06/02/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00006050AM25| |RA File Number|31AX04000425 AM25| |Licence No and<br>Date|3111004406/06/02/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 149 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name KEI INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006142AM25
RA File Number 05AX04003473 AM25
Licence No and<br>Date 0511030801/11/02/2025
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (DPIIT) via mail vide U.O No. P-47011/95/2019-TSW dated 17.03.2025, as under:<br>Note: The written recommendation as given by (DPIIT) will be communicated to the<br>applicant as well as concerned RA through email.<br>RA concerned may take suitable consequential action accordingly.

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/95/2019-TSW dated 17.03.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

76

UDIN00085362AM26

2019-TSW dated 17.03.2025, as under:

Note: The written recommendation as given by (DPIIT) will be communicated to the applicant as well as concerned RA through email.

76

UDIN00085362AM26

Case No. 150 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name BEDMUTHA INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006187AM25
RA File Number 03AX04005814 AM25
Licence No and<br>Date 0311041303/12/02/2025
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 151 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JINDAL METALS & ALLOYS LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006465AM25
RA File Number 05AX04004088 AM25
Licence No and<br>Date 0511031113/28/02/2025
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 152 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name EOT COUPLINGS AND CONNECTIONS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006473AM25
RA File Number 05AX04003969 AM25
Licence No and<br>Date 0511031138/28/02/2025
Norms Committee Decision:

77

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/69/2023-TSW dated 01.04.2025, as under:

0085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (DPIIT) via mail vide U.O No. P-47011/69/2023-TSW dated 01.04.2025, as under:

  • I. Import items at Si No.1 to 5 shall be of relevant grade and size as contained / utilized in the respective export items.

  • II. Quantity of import item at SI. No. 1 may be allowed as 66.182 MT as 1.60 Kgs/Kg content in the export item at SI.No.1.

  • III. Quantity of import item at SI. No. 2 may be allowed as 38.225 MT as 1.60 Kgs/Kg content in the export item at SI.No.2.

  • IV. Quantity of import item at SI. No. 3 may be allowed as 36.297 MT as 1.60 Kgs/Kg content in the export item at SI.No.3.

  • V. Quantity of import item at SI. No. 4 may be allowed as 35.980 MT as 1.60 Kgs/Kg content in the export item at SI.No.4.

  • VI. Quantity of import item at SI. No. 5 may be allowed as 56.401 MT as 1.60 Kgs/Kg content in the export item at SI.No.5.
Case No. 153 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name GE VERNOVA T&D INDIA LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006523AM25
RA File Number 34AX04001008 AM25
Licence No and<br>Date 3411006142/03/03/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQRNORM APPLY 00006523AM25| ||| |RA File Number|34AX04001008 AM25| ||| |Licence No and<br>Date|3411006142/03/03/2025| ||| |Norms Committee Decision:<br>Case deferred for the comments of TE.|| |||
Case No. 154 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name POLYCAB INDIA LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

78

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00006546AM25
RA File Number 03AX04006111 AM25
Licence No and
Date 0311041826/04/03/2025
Norms Committee Decision:
Case deferred for the comments of TE.
Case No. 155 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ANAND ENGINEERING PRODUCTS PRIVATE LIMITED
Meeting Number
and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006553AM25
RA File Number 04AX04001160 AM25
Licence No and
Date 0411009199/04/03/2025
Norms Committee Decision:
The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Gross input quantity of import item required, net weight of import item contained in each export<br>product and % wastage on net content basis.<br>I.<br>Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii)<br>remaining unused pieces.<br>Blow-up diagram of export products made from import items covered under this license labeling<br> <br>II.

ach import item, (ii) pieces cut from each of them and (iii)<br>remaining unused pieces.<br>Blow-up diagram of export products made from import items covered under this license labeling<br> <br>II.|| |parts with dimensions.<br>GST invoice of scrap sale.<br>III.<br>Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>furnished.<br>IV.<br>Wih f h E Pd<br>V|| |egt o<br>.<br>Weiht of<br>VI|eac xport rouct.<br>each of the imorted and indienous inut searatel for each roduct for the urose of| |g<br>material b<br>.|p g p, py p, pp<br>lancin Net weiht (Gross weiht minus wastae) for each imorted and indienous inut| |<br>in the exp|g. g g g p g p<br>ort product may be indicated Net weight along with details of other imported input to be| |<br>used in the<br>if an ma|.<br>resultant product and sought to be imported/procured from sources other than the license,<br>also be indicated| |y,<br>Startin fr<br>VII|.<br>om the secification of the exort roduct basic calculation as to how of raw material| |g<br>proposed f<br>.|p p p,<br>or import has been arrived at including the net weight of components to be manufactured| |<br>out of the<br>justificatio|,<br>se imported materials, wastages claimed at each stage of manufacturing with complete<br>n and suorted b documentar evidence/drawins etc| |pp y y g .|| |The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

.|| |The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • I. Gross input quantity of import item required, net weight of import item contained in each export product and % wastage on net content basis.

  • II. Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii) remaining unused pieces.

  • Blow-up diagram of export products made from import items covered under this license labeling parts with dimensions.

  • IV. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • VI. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • VII. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

79

UDIN00085362AM26

anufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

79

UDIN00085362AM26

Case No. 156 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JINDAL ALUMINIUM LIMITED.
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006649AM25
RA File Number 07AX04002019 AM25
Licence No and<br>Date 0711013880/11/03/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 157 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name NORDEX INDIA MANUFACTURING PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006711AM25
RA File Number 07AX04002072 AM25
Licence No and<br>Date 0711013916/17/03/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 158 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name YOGESHWAR POLYMERS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006820AM25
RA File Number 08AX04002173 AM25
Licence No and<br>Date 0811014495/22/03/2025
Norms Committee Decision:

80

UDIN00085362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (Tec-1) dated 02.05.2025, as under:

  • I. As applied for with 5 % wastage.

362AM26

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (Tec-1) dated 02.05.2025, as under:

  • I. As applied for with 5 % wastage.
Case No. 159 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ANAND ENGINEERING PRODUCTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006831AM25
RA File Number 04AX04001256 AM25
Licence No and<br>Date 0411009346/24/03/2025
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ask the applicant to furnish the following<br>information/documents as per comments given by the TE:<br>Gross input quantity of import item required, net weight of import item contained in each export<br>product and % wastage on net content basis.<br>Length, weight and number of (i) each import item, (ii) pieces cut from each of them and (iii)<br>remaining unused pieces.<br>Blow-up diagram of export products made from import items covered under this license labeling<br>parts with dimensions.<br>I.<br>GST invoice of scrap sale.<br>II.<br>Past production & corresponding consumption quantities for similar items for last 3 years.<br>III.<br>Detail technical drawings with dimension of each export product, Catalogue, if any, may also be<br>furnished.<br>IV.<br>Weight of each Export Product.<br>V.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing.

may also be<br>furnished.<br>IV.<br>Weight of each Export Product.<br>V.<br>Weight of each of the imported and indigenous input, separately for each product, for the purpose of<br>material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input<br>in the export product may be indicated. Net weight along with details of other imported input to be<br>used in the resultant product and sought to be imported/procured from sources other than the license,<br>if any, may also be indicated.<br>VI.<br>Starting from the specification of the export product, basic calculation as to how of raw material<br>proposed for import has been arrived at, including the net weight of components to be manufactured<br>out of these imported materials, wastages claimed at each stage of manufacturing with complete<br>justification and supported by documentary evidence/drawings etc.<br>VII.<br>The case stands deferred.||

The Committee considered the case as per agenda and decided to ask the applicant to furnish the following information/documents as per comments given by the TE:

  • IV. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

nt to furnish the following information/documents as per comments given by the TE:

  • IV. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.

  • VI. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.

  • VII. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

81

UDIN00085362AM26

Case No. 160 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name RAHUL FERROMET AND ENGINEERING PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006859AM25
RA File Number 34AX04001107 AM25
Licence No and<br>Date 3411006243/25/03/2025
Norms Committee Decision:<br> Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00006859AM25| |RA File Number|34AX04001107 AM25| |Licence No and<br>Date|3411006243/25/03/2025| |Norms Committee Decision:<br> Case deferred for the comments of TE.||

Case No. 161 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name KEI INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00006894AM25
RA File Number 05AX04004345 AM25
Licence No and<br>Date 0511031596/26/03/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 162 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TPI COMPOSITES INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000075AM26
RA File Number 04AX04001292 AM25
Licence No and<br>Date 0411009433/03/04/2025
Norms Committee Decision:

82

UDIN00085362AM26

ase deferred for the comments of TE.

Case No. 163 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JAI BALAJI INDUSTRIES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000086AM26
RA File Number 02AX04000842 AM25
Licence No and<br>Date 0211008484/03/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000086AM26| |RA File Number|02AX04000842 AM25| |Licence No and<br>Date|0211008484/03/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 164 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name COPTEC PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000088AM26
RA File Number 03AX04000009 AM26
Licence No and<br>Date 0311042849/04/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 165 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ELECTRICAL CONTROLS & SYSTEMS
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQFile Number HQRNORM APPLY 00000089AM26

83

UDIN00085362AM26

RA File Number 34AX04001131 AM25
Licence No and<br>Date 3411006276/04/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

9AM26|

83

UDIN00085362AM26

RA File Number 34AX04001131 AM25
Licence No and<br>Date 3411006276/04/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 166 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name AADISHAKTI METAL RECYCLING PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000090AM26
RA File Number 05AX04004146 AM25
Licence No and<br>Date 0511031770/04/04/2025
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 02.05.2025, as under:<br>SL<br>No<br>ITEM<br>OF<br>EXPORT<br>QUANTITY ITEM OF IMPORT<br>WASTAGE<br>TO<br>BE<br>ALLOWED<br>1<br>PURE<br>LEAD<br>INGOTS 99.97%<br>TO 99.99 %<br>2000.00 MTSLEAD<br>SCRAP<br>ISRI<br>CODE RAINS<br>6% ON THE<br>NET<br>CONTENT<br>OF LEAD IN<br>THE<br>EXPORT<br>PRODUCT<br>**NOTE:**The Company has to produce a Certificate of Analysis (COA) from the Customs<br>Authorized laboratory/Supplier on the net content of lead in the imported item and also Consent to<br>Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap for manufacturing of pure lead<br>ingots, to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.

r>Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap for manufacturing of pure lead<br>ingots, to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company has to produce a Certificate of Analysis (COA) from the Customs Authorized laboratory/Supplier on the net content of lead in the imported item and also Consent to Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap for manufacturing of pure lead ingots, to the RA concerned.

Case No. 167 / NC/2/MEET/Apr/202526/2

84

UDIN00085362AM26

Case Status Case Approved
Party Name POCL ENTERPRISES LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000097AM26
RA File Number 04AX04001207 AM25
Licence No and<br>Date 0411009436/04/04/2025

| |Meeting Number<br>and Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM APPLY 00000097AM26| |RA File Number|04AX04001207 AM25| |Licence No and<br>Date|0411009436/04/04/2025| |Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 02.05.2025, as under:<br>Sl<br>No<br>Export Item<br>QUANTITY ITEM<br>OF<br>IMPORT<br>Quantity TO BE<br>ALLOWED<br>1<br>Pure<br>Lead<br>Ingots<br>(Lead<br>Content 99.97%<br>Purity)<br>2000000.00<br>KGS<br>Lead Scrap Rails<br>1.06 KGS/KGON<br>THE<br>NET<br>CONTENT OF THE<br>LEAD<br>IN<br>THE<br>EXPORT<br>PRODUCT.<br>**NOTE:**The Company has to produce a Certificate of Analysis (COA) from the Customs<br>Authorized laboratory/Supplier on the net content of lead in the imported item and also Consent to<br>Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap (RAILS) for manufacturing of<br>pure lead ingots, to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

tion accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company has to produce a Certificate of Analysis (COA) from the Customs Authorized laboratory/Supplier on the net content of lead in the imported item and also Consent to Operate from MoEF & CC/CPCB/SPCB for processing of lead scrap (RAILS) for manufacturing of pure lead ingots, to the RA concerned.

Case No. 168 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name PTPL TUBING & PRODUCTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000107AM26
RA File Number 56AX04000610 AM25
Licence No and<br>Date 5611003819/04/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

85

UDIN00085362AM26

Case No. 169 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name TECHNO KITCHENWARE PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000114AM26
RA File Number 03AX04006655 AM25
Licence No and<br>Date 0311042893/07/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000114AM26| |RA File Number|03AX04006655 AM25| |Licence No and<br>Date|0311042893/07/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 170 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name OM DRISHIAN INTERNATIONAL LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000116AM26
RA File Number 05AX04004295 AM25
Licence No and<br>Date 0511031832/07/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 171 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ROSENBERGER INTERCONNECT INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000117AM26
RA File Number 05AX04004467 AM25
Licence No and<br>Date 0511031833/07/04/2025
Norms Committee Decision:

86

UDIN00085362AM26

Case No. 172 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name LS CABLE INDIA PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000118AM26
RA File Number 33AX04000003 AM26
Licence No and<br>Date 3311002602/07/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000118AM26| |RA File Number|33AX04000003 AM26| |Licence No and<br>Date|3311002602/07/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 173 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name ULTRA CORPOTECH PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000119AM26
RA File Number 31AX04000002 AM26
Licence No and<br>Date 3111004638/07/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 174 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name AEQUS COOKWARE PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000128AM26
RA File Number 07AX04000033 AM26

87

UDIN00085362AM26

Licence No and 0711014133/08/04/2025 Date Norms Committee Decision: Case deferred for the comments of TE.

Case No. 175 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SYRMA SGS TECHNOLOGY LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000137AM26
RA File Number 04AX04000013 AM26
Licence No and<br>Date 0411009451/08/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000137AM26| |RA File Number|04AX04000013 AM26| |Licence No and<br>Date|0411009451/08/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 176 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name JINDAL SAW LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000138AM26
RA File Number 05AX04004431 AM25
Licence No and<br>Date 0511031852/08/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 177 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name R R KABEL LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

88

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00000162AM26
RA File Number 03AX04000085 AM26
Licence No and<br>Date 0311042951/09/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 178 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name R R KABEL LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000163AM26
RA File Number 03AX04000086 AM26
Licence No and<br>Date 0311042952/09/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000163AM26| |RA File Number|03AX04000086 AM26| |Licence No and<br>Date|0311042952/09/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 179 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name AVON TUBETECH PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000184AM26
RA File Number 05AX04004498 AM25
Licence No and<br>Date 0511031880/09/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

Case No. 180 / NC/2/MEET/Apr/202526/2

89

UDIN00085362AM26

Case Status Case Approved
Party Name TOSHIBA TRANSMISSION & DISTRIBUTION SYSTEMS (INDIA) PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000185AM26
RA File Number 09AX04001224 AM25
Licence No and<br>Date 0911009409/09/04/2025

| |Meeting Number<br>and Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM APPLY 00000185AM26| |RA File Number|09AX04001224 AM25| |Licence No and<br>Date|0911009409/09/04/2025| |Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments<br>of (MHI) dated 01.05.2025, as under:<br>CRGO Silicon Electrical Steel Coils may be allowed with1% wastage on net content basis, as<br>applied for.<br>I.<br>Aluminium Wire Rods may be allowed with1% wastage on net content basis, as applied for.<br>II.<br>Items at SI.No.11 to 13, 55 to 57, 72 to 74 and 82 to 84may be allowed as consumables with their<br>total value up to0.5% of total FOB valueof export or as applied for, whichever is lower.<br>III.<br>Other items of import may be allowed as components onnet-to-net basis with NIL wastage under<br>GN-4.<br>IV.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (MHI) dated 01.05.2025, as under:

  • I. CRGO Silicon Electrical Steel Coils may be allowed with 1% wastage on net content basis , as applied for.

  • III. Items at SI.No. 11 to 13, 55 to 57, 72 to 74 and 82 to 84 may be allowed as consumables with their total value up to 0.5% of total FOB value of export or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as components on net-to-net basis with NIL wastage under GN-4 .

e up to 0.5% of total FOB value of export or as applied for, whichever is lower.

  • IV. Other items of import may be allowed as components on net-to-net basis with NIL wastage under GN-4 .
Case No. 181 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name DIAMOND METAL SCREENS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000212AM26
RA File Number 07AX04000058 AM26
Licence No and<br>Date 0711014173/11/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

90

UDIN00085362AM26

Case No. 182 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name EPCM SERVICE AND SUPPLY PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000224AM26
RA File Number 08AX04002252 AM25
Licence No and<br>Date 0811014698/15/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.
Case No. 183 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name NICCO CABLES PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000232AM26
RA File Number 02AX04000024 AM26
Licence No and<br>Date 0211008523/15/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

|HQ File Number|HQRNORM APPLY 00000232AM26| |RA File Number|02AX04000024 AM26| |Licence No and<br>Date|0211008523/15/04/2025| |Norms Committee Decision:<br>Case deferred for the comments of TE.||

Case No. 184 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name SYRMA SGS TECHNOLOGY LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000258AM26
RA File Number 04AX04000029 AM26
Licence No and<br>Date 0411009471/16/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

91

UDIN00085362AM26
Case No. 185 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name DIACH CHEMICALS & PIGMENTS PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000288AM26
RA File Number 02AX04000018 AM26
Li N d
cence o an<br>Date 0211008539/17/04/2025
Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the
committee report & comments of consultant (SKB) dated 02.05.2025, as under:
<br> Sl<br> ITEM<br>OF <br>Quantity TO BE
**No ** **Export Item ** QUANTITY <br>IMPORT ALLOWED
PURE LEAD WASTAGE
<br>INGOT LEAD <br>**@6%**ON THE

br>|||ITEM<br>OF|<br>Quantity TO BE|| |||**No **|**Export Item |QUANTITY|<br>IMPORT|ALLOWED|| ||||||||| ||||PURE LEAD|||WASTAGE|| ||||<br>INGOT||LEAD|<br>@6%**ON THE|| ||1||(Minimum<br>Lead content<br> <br>|<br> <br>631.00 MT|SCRAP ISRI<br>CODE<br>|<br>NET CONTENT<br>OF<br>LEAD<br>IN<br> <br>|<br> <br>| |99.97%<br>to<br>99.999%)<br>RAILS<br>THE<br>EXPORT<br>PRODUCT.<br>**NOTE:**The Coman has to roduce a Certificate of Analsis (COA) from the Customs|||99.97%<br>to<br>99.999%)||RAILS|THE<br>EXPORT<br>PRODUCT.|| |py p y<br>Authorized Laboratory/Supplier and Consent to Operate from MoEF &CC/CPCB/SPCB for<br>processing imported lead scrap (Rails) for manufacturing pure lead ingots, to the RA concerned.<br>RA concerned may take suitable consequential action accordingly.|||||||| ||||||||| ||||||||| ||||||||| ||||||||| ||||||||| |Case No.||186 / NC/2/MEET/Apr/202526/2|||||| |Case Status||Case Deferred|||||| |Party Name||KOTHARI METSOL PRIVATE LIMITED|||||| |Meeting Number||NC/ 2/ MEET/ Ar/ 202526/ 2 and 02/05/2025|||||| |and Date||p|||||| |HQ File Number||HQRNORM APPLY 00000303AM26|||||| |RA File Number||31AX04000010 AM26|||||| ||||||||| |Licence No and<br>Date||3111004672/17/04/2025|||||| |Norms Committee Decision:||||||||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

e Decision:||||||||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company has to produce a Certificate of Analysis (COA) from the Customs Authorized Laboratory/Supplier and Consent to Operate from MoEF &CC/CPCB/SPCB for processing imported lead scrap (Rails) for manufacturing pure lead ingots, to the RA concerned.

Case No. 186 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name KOTHARI METSOL PRIVATE LIMITED
Meeting Number<br>and Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000303AM26
RA File Number 31AX04000010 AM26
Licence No and<br>Date 3111004672/17/04/2025
Norms Committee Decision:

92

UDIN00085362AM26

Case No. 187 / NC/2/MEET/Apr/202526/2
Case Status Case Approved
Party Name DIACH CHEMICALS & PIGMENTS PRIVATE LIMITED
Meeting Number and<br>Date NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025
HQ File Number HQRNORM APPLY 00000305AM26
RA File Number 02AX04000033 AM26
Licence No and Date 0211008549/17/04/2025

TED| |Meeting Number and<br>Date|NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025| |HQ File Number|HQRNORM APPLY 00000305AM26| |RA File Number|02AX04000033 AM26| |Licence No and Date|0211008549/17/04/2025| |Norms Committee Decision:<br>The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the<br>committee report & comments of consultant (SKB) dated 02.05.2025, as under:<br>Sl No Export Item<br>QUANTITYITEM<br>OF<br>IMPORT<br>Quantity<br>TO<br>BE<br>ALLOWED<br>1<br>PURE<br>LEAD<br>INGOT (Minimum<br>Lead<br>content<br>99.97% to 99.999%)<br>631.00 MT<br>REMELTED LEAD<br>INGOT / BLOCK<br>WASTAGE<br>@2%<br>ON<br>THE NET CONTENT OF<br>LEAD IN THE EXPORT<br>PRODUCT.<br>**NOTE:**The Company must produce a Certificate of Analysis (COA) from the Customs Authorized<br>Laboratory/Supplier and Consent to Operate from MoEF &CC/CPCB/SPCB to the RA concerned<br>for processing imported Remelted Lead Ingots for manufacturing pure lead ingots.<br>RA concerned may take suitable consequential action accordingly.||

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per the committee report & comments of consultant (SKB) dated 02.05.2025, as under:

NOTE: The Company must produce a Certificate of Analysis (COA) from the Customs Authorized Laboratory/Supplier and Consent to Operate from MoEF &CC/CPCB/SPCB to the RA concerned for processing imported Remelted Lead Ingots for manufacturing pure lead ingots.

) from the Customs Authorized Laboratory/Supplier and Consent to Operate from MoEF &CC/CPCB/SPCB to the RA concerned for processing imported Remelted Lead Ingots for manufacturing pure lead ingots.

Case No. 188 / NC/2/MEET/Apr/202526/2
Case Status Case Deferred
Party Name DE VOLTRANS PRIVATE LIMITED
Meeting Number NC/ 2/ MEET/ Apr/ 202526/ 2 and 02/05/2025

93

UDIN00085362AM26

and Date
HQ File Number HQRNORM APPLY 00000306AM26
RA File Number 03AX04006743 AM25
Licence No and<br>Date 0311043143/17/04/2025
Norms Committee Decision:<br>Case deferred for the comments of TE.

94

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 7518 --apply.

Citation copied