IN FORCE Norms Committee — Engineering (Gr A / NC-II) Advance Authorisation 2020-10-20

DGFT Committee Minutes

Document text

DIRECTORATE GENERAL OF FOREIGN TRADE - (DES II SECTION)

MINUTES OF THE NORMS COMMITTEE-II MEETING No. 09/81-ALC2/2020 DATED 20.10.2020 (Held on 27.10.2020)

Please Note

i. For information of exporters, Norms Committee-II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80, 85. Communications in respect of cases/pertaining to NC-II may be sent to email address: nc2.dgft@nic.in
ii. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The concerned applicant/company may go through the same and respond accordingly.
iii. Similarly, a scanned copy of the blank Standard Deficiency Format, which may find a reference in NC decisions, has also been attached in the end. This may also be referred to by the concerned applicant/company and may be responded accordingly.
iv. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC.
v. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

Meeting No. 09/81 of Norms Committee-II for the year 2020-21 (Originally scheduled for 20.10.2020) held on 27.10.2020 through Video Conferencing under the Chairmanship of Shri R. P. Goyal, Additional Director General of Foreign Trade to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2015-20. The following members were present in the meeting:-

Sl. No.	Name & Designation	Department
1.	Shri K. S. Sodhi, AD (ME)	MSME
2.	Shri Sushil Kumar Jangid, Scientist‘B’	MeitY
3.	Shri Shaish Kumar, (TEC-1)	Consultant
4.	Shri V.C. Agarwal, (TEC-3)	Consultant
5.	Shri S. K. Bhatnagar, (SKB)	Consultant
In attendance
1.	Shri Shobhit Gupta, Dy. DGFT	DGFT

i. Draft Minutes of Meeting No. 07/81 scheduled for 08.09.2020 and held on 15.09.2020 were circulated among all the members of the Committee on 13.10.2020. On receipt of comments, the minutes were finalized and uploaded on DGFT’s website on 16.10.2020. These minutes are unanimously approved.
ii. Draft Minutes of Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020 were circulated among all the members of the Committee on 23.10.2020. On receipt of comments, the minutes were finalized and uploaded on DGFT’s website on 27.10.2020. These minutes are unanimously approved.

Minutes of the cases discussed in the meeting are as under:

1 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

MEETING NUMBER: 9/81-ALC2/2020 MEETING DATE: 20.10.2020

Case No.:7/21/81-	Party Name: BERGEN PIPE	Meet No/Date:9/81-	Status:
ALC2/2017	SUPPORTS INDIA	ALC2/2020	Rejected
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:0410163738
:01/81/050/00448/AM18/	:04/24/040/00153/AM18/	28.11.2017
HQ E-office Computer No.:
24464

Decision: The Committee considered the case as per the agenda and noted that the applicant was asked 1 several times to furnish certain information as raised in meeting No. 08/81 dated 19.12.2018, 03/81 dated 15.05.2019, 09/81 dated 07.08.2019 & 06/81 dated 11.08.2020. The representatives of the applicant during personal hearing held through video conferencing in Meeting No. 06/81 (Originally scheduled for 11.08.2020) held on 25.08.2020 was also directed to furnish the requisite information. However, Consultant (TEC-3) informed that the applicant has not yet been furnished any specific reply against issued deficiency letters despite many reminders. Therefore, the Committee decided to reject the case under intimation to RA, Chennai.

RA concerned may take suitable consequential action accordingly.

Case No.:362/14/81-	Party Name: TRAFOMEC	Meet No/Date:9/81-	Status:
ALC2/2018	INDIA PVT LTD	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:0710112727	Action by :
:01/81/050/01080/AM19/	:07/24/040/00296/AM18/	23.01.2018	Applicant
HQ E-office Computer No.:
24465

2 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by DHI:

Complete specification with catalogue of each export product with quantity of export in number.
Sl. No. 2, 4, 5 & 11 of the Standard Deficiency Format.
Manufacturing process of export item giving specific use of each import item.

The case stands deferred.

3	Case No.:3/2/81-ALC2/2018Party Name: ANGELS<br>ALUMINIUM<br>CORPORATION<br>Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Status:<br>Deferred<br>HQ File<br>:01/81/050/00008/AM19/<br>HQ E-office Computer No.:<br>24476<br>RLA File<br>:03/94/040/00933/AM18/<br>Lic.No/Date:0310819231<br>19.02.2018<br>Action by :<br>Applicant<br>Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 30.09.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.	Party Name: ANGELS<br>ALUMINIUM<br>CORPORATION	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
		RLA File<br>:03/94/040/00933/AM18/	Lic.No/Date:0310819231<br>19.02.2018	<br>Action by :<br>Applicant

2 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

4	Case No.:82/14/81-<br>ALC2/2018<br>Party Name: TRAFOMEC<br>INDIA PVT LTD<br>Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Status:<br>Deferred<br>HQ File<br>:01/81/050/00800/AM19/<br>HQ E-office Computer No.:<br>24477<br>RLA File<br>:07/24/040/00011/AM19/<br>Lic.No/Date:0710113216<br>02.05.2018<br>Action by :<br>TEC-3<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply<br>against deficiency letter has been received. However, the matter was deliberated in the meeting and<br>the Committee decided to forward the applicant’s reply along with complete set of application to<br>Consultant (TEC-3) for examination & comments.<br>The case stands deferred.	Party Name: TRAFOMEC<br>INDIA PVT LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
		RLA File<br>:07/24/040/00011/AM19/	Lic.No/Date:0710113216<br>02.05.2018	<br>Action by :<br>TEC-3

Case No.:5/10/81-	Party Name: MODISON	Meet No/Date:9/81-	Status:
ALC2/2018	METALS LTD.	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310822894
:01/81/050/00486/AM19/	:03/95/040/00439/AM19/	07.08.2018
HQ E-office Computer No.:
24478

<br> <br> <br> <br> <br>	Case No.:5/10/81-<br>ALC2/2018	Case No.:5/10/81-<br>ALC2/2018	Case No.:5/10/81-<br>ALC2/2018	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
	HQ File<br>:01/81/050/00486/AM19/<br>HQ E-office Computer No.:<br>24478			RLA File<br>:03/95/040/00439/AM19/				Lic.No/Date:0310822894<br>07.08.2018
5<br> <br> <br> <br>	Decision:The Committee considered the case<br>written comments given by DHI as under:					as per agenda and decided to fix			the ad-hoc norms as per
	ITCHS<br>Code	Export Item	Quantity		Sl.<br>No.	ITCHS<br>Code	Import Item		Recommended<br>Quantity
	85389000	Copper<br>Tungsten<br>Contact	33019<br>Kgs		1	81011100	Tungsten Metal<br>Powder		5565 Kgs with net<br>wastage of 8.5% after<br>50%recovery
					2	74031100	Electrolytic<br>Copper Cathode		17627 Kgs with net<br>wastage of 33% after<br>50% recovery
	Note: Export weight may be amended to 33019 Kgs & the same to be incorporated in the AA.<br>RA concerned maytake suitable consequential action accordingly.

6	Case No.:124/10/81-<br>ALC2/2018<br>Party Name: TBEA ENERGY<br>(INDIA) PRIVATE LIMITED<br>Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Status:<br>Deferred<br>HQ File<br>:01/81/050/00605/AM19/<br>HQ E-office Computer No.:<br>24479<br>RLA File<br>:34/24/040/00146/AM19/<br>Lic.No/Date:3410044397<br>08.08.2018<br>Action by :<br>Applicant<br>Decision:The Committee considered the case as per agenda and noted the comments given by DHI<br>regarding non-submission of calculation/information. The Committee decided to ask the applicant to<br>furnish required information as sought by DHI.<br>The case stands deferred.	Party Name: TBEA ENERGY<br>(INDIA) PRIVATE LIMITED	<br>Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
		RLA File<br>:34/24/040/00146/AM19/	Lic.No/Date:3410044397<br>08.08.2018	<br>Action by :<br>Applicant

3 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

	Case No.:378/14/81-		Party Name: TRUFORM	Meet No/Date:9/81-	Status:
	ALC2/2018		TECHNO PRODUCTS	ALC2/2020	Deferred
			LIMITED	20.10.2020
	HQ File :		RLA File :	Lic.No/Date:5010002501	Action by :
	01/81/050/01096/AM19/		50/24/040/00027/AM19/	07.01.2019	Applicant
	HQ E-office Computer No.:
7	24480
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking
	certain information as raised	by MSME was sent to the applicant on 03.08.2020 followed by a
	reminder on 30.09.2020. However, no reply has been received			yet. Therefore, the Committee decided
	to remind again the applicant for furnishing the requisite information.
	The case stands deferred.

	Case No.:284/14/81-		Party Name: DISHA AUTO	Meet No/Date:9/81-	Status:
	ALC2/2018		COMPONENTS PVT. LTD.	ALC2/2020	Deferred
				20.10.2020
	HQ File		RLA File	Lic.No/Date:0310826973	Action by :
	:01/81/050/01002/AM19/		:03/94/040/00976/AM19/	11.02.2019	Applicant
	HQ E-office Computer No.:
8	24481
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking
	certain information as raised	by MSME was sent to the applicant on 30.09.2020. However, no reply
	has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the
	requisite information.
	The case stands deferred.

	Case No.:298/14/81-	Party Name: DELTA	Meet No/Date:9/81-	Status:
	ALC2/2018	ELECTRONICS INDIA	ALC2/2020	Deferred
		PRIVATE LIMITED	20.10.2020
	HQ File	RLA File	Lic.No/Date:0510409688	Action by :
	:01/81/050/01016/AM19/	:05/23/040/00504/AM19/	18.02.2019	Applicant
	HQ E-office Computer No.:
9	24482
	Decision:The Committee considered the case as per agenda and heard the representatives of the
	applicant during personal hearing held through video conferencing. The representatives explained the
	case in details and the Committee directed the representative of the applicant to furnish detailed
	written submission.
	The case stands deferred.

	Case No.:22/18/81-	Party Name: HIND ALUMINIUM	Meet No/Date:9/81-	Status:
	ALC2/2019	INDUSTRIES LTD.	ALC2/2020	Deferred
			20.10.2020
10	HQ File	RLA File	Lic.No/Date:0310828114	Action by :
	:01/81/050/00316/AM20/	:03/94/040/01125/AM19/	02.04.2019	Applicant
	HQ E-office Computer

4 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

No.: 24512

Decision: The Committee considered the case as per the agenda and noted the comments given by Consultant (TEC-3) via email dated 18.10.2020. The matter was discussed in the meeting. The Committee noted that the applicant has sought ‘Aluminium Plates/Sheets/Coils/Slabs’as import items at Sl. No. 1, 4, 7, 10, 13 & 16 to manufacture ‘Aluminium Conductor Steel Reinforced (ACSR)’. The Committee members were of the view that ‘Aluminium Plates/Sheets/Coils/Slabs’ are not essential to ‘ ’ produce ACSR. ACSR is manufactured from primary material such as ingot/billets/wire rod .

Hence, the Committee decided to seek a clarification from the applicant as to why they have applied for the material which is not required.

11	Case No.:1/3/81-ALC2/2019	Party Name: SEIKODENKI<br>INDIA PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00021/AM20/<br>HQ E-office Computer No.:<br>24514	RLA File<br>:04/24/040/00003/AM20/	Lic.No/Date:0410165474<br>15.04.2019
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byMeitYvide U. O. No.: W-21/35/2020-IPHW-MeitY dated 02.09.2020.<br>(copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by MeitY vide U. O. No.: W-21/35/2020-IPHW-MeitY dated 02.09.2020. (copy enclosed)

12	Case No.:17/3/81-ALC2/2019	Party Name: TBEA ENERGY<br>(INDIA) PRIVATE LIMITED	<br>Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00037/AM20/<br>HQ E-office Computer No.:<br>24515	RLA File<br>:34/24/040/00034/AM20/	Lic.No/Date:3410045082<br>26.04.2019	<br>Action by :<br>DHI
	Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to DHI on 08.10.2020 for examination of the case. However, DHI informed that the case is under<br>examination. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

13	Case No.:28/5/81-ALC2/2019	Party Name: DISHA AUTO<br>COMPONENTS PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00077/AM20/<br>HQ E-office Computer No.:<br>23090	RLA File<br>:03/94/040/00121/AM20/	Lic.No/Date:0310829099<br>17.05.2019
	Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments given by MSME via email dated 15.10.2020 & 17.08.2020 as under:<br>1. Per unit weight of export item with BTC(269.9+/- 0.5 mm),LTC(254.9+/- 0.5mm)and STC

5 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

(196.9+/-0.5mm) thread casing is 20.86Kg, 21.67Kg & 15.62Kg respectively.

Quantity of import item may be allowed as 1.013 mtr/mtr content in the export product, 1.012 mtr/mtr content in the export product & 1.0135 mtr/mtr content in the export product for BTC, LTC & STC respectively .
Quantity of import item may be allowed in terms of weight with 33.76%, 24.37% & 31.13% wastage for BTC, LTC & STC respectively .

14	Case No.:144/14/81-<br>ALC2/2019	Party Name: NU-CORK<br>PRODUCTS(P) LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0510411850<br>16.09.2019	Status:<br>Deferred<br> <br>Action by :<br>Applicant
	<br>HQ File<br>:01/81/050/00242/AM20/<br>HQ E-office Computer No.:<br>24518	RLA File<br>:05/24/040/00339/AM20/
	<br>Decision:The Committee considered the case as per agenda and noted that a letter was sent to the<br>applicant for submitting a legible copy of application along with all the relevant documents on<br>07.08.2020 followed by a reminder on 30.09.2020. However, no information has been received yet.<br>Therefore, the Committee decided to remind again the applicant for submitting a legible copy of<br>application for examination of the case.<br>The case stands deferred.

15	Case No.:148/14/81-<br>ALC2/2019	Party Name: SCHNEIDER<br>ELECTRIC INDIA PVT<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0710115451<br>19.09.2019	Status:<br>Deferred<br> <br>Action by :<br>Applicant
	<br>HQ File<br>:01/81/050/00246/AM20/<br>HQ E-office Computer No.:<br>24519	RLA File<br>:07/24/040/00137/AM20/
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 04.08.2020 followed<br>by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee<br>decided to remind again the applicant for furnishing the requisite information.<br>The case stands deferred.

16	Case No.:149/14/81-<br>ALC2/2019	Party Name: LEITWIND<br>SHRIRAM MANUFACTURING<br>PRIVATE LIMITED<br> <br>RLA File<br>:04/24/040/00078/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0410166096<br>20.09.2019	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00247/AM20/<br>HQ E-office Computer<br>No.: 24669			Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-1) on 13.10.2020 for examination of the case. However, no comments have<br>been received yet. Therefore, the Committee decided to remind Consultant (TEC-1) for expediting the<br>comments.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-1) on 13.10.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-1) for expediting the comments.

6 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

17	Case No.:151/14/81-<br>ALC2/2019	Party Name: LM WIND<br>POWER BLADES INDIA<br>PVT. LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00249/AM20/<br>HQ E-office Computer No.:<br>24670	RLA File<br>:34/24/040/00191/AM20/	Lic.No/Date:3410045466<br>20.09.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-1) was sent to the applicant on 30.09.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

18	Case No.:152/14/81-<br>ALC2/2019	Party Name: LM WIND<br>POWER BLADES INDIA<br>PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00250/AM20/<br>HQ E-office Computer No.:<br>24671	RLA File<br>:34/24/040/00190/AM20/	Lic.No/Date:3410045467<br>20.09.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-1) was sent to the applicant on 30.09.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

Case No.:160/14/81-	Party Name: KRYFS POWER	Meet No/Date:9/81-	Status:
ALC2/2019	COMPONENTS LIMITED	ALC2/2020	Rejected
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310831798
:01/81/050/00258/AM20/	:03/94/040/00475/AM20/	25.09.2019
HQ E-office Computer No.:
24673

19 Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 05.12.2019 followed by reminders on 13.03.2020, 04.08.2020 & 30.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

20	<br>Case No.:159/14/81-<br>ALC2/2019	Party Name: LEITWIND<br>SHRIRAM<br>MANUFACTURING	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred

7 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

		PRIVATE LIMITED
	HQ File<br>:01/81/050/00257/AM20/<br>HQ E-office Computer No.:<br>24674	RLA File<br>:04/24/040/00102/AM20/	Lic.No/Date:0410166105<br>25.09.2019	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 14.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

21	Case No.:164/14/81-<br>ALC2/2019	Party Name: TPM DEPOT	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00262/AM20/<br>HQ E-office Computer No.:<br>24676	RLA File<br>:31/83/040/00091/AM20/	Lic.No/Date:3110067545<br>27.09.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by DHI was sent to the applicant on 30.09.2020. However, no reply has<br>been received yet. Therefore, the Committee decided to remind the applicant for furnishing the<br>requisite information.<br>The case stands deferred.

Case No.:166/14/81-	Party Name: VEER-O-	Meet No/Date:9/81-	Status:
ALC2/2019	METALS PRIVATE	ALC2/2020	Approved
	LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:0710115502
:01/81/050/00264/AM20/	:07/24/040/00147/AM20/	01.10.2019
HQ E-office Computer No.:
24693

	Case No.:166/14/81-<br>ALC2/2019	Case No.:166/14/81-<br>ALC2/2019	Party Name: VEER-O-<br>METALS PRIVATE<br>LIMITED	Party Name: VEER-O-<br>METALS PRIVATE<br>LIMITED	Party Name: VEER-O-<br>METALS PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
	HQ File<br>:01/81/050/00264/AM20/<br>HQ E-office Computer No.:<br>24693		<br>RLA File<br>:07/24/040/00147/AM20/			Lic.No/Date:0710115502<br>01.10.2019
22	Decision:The Committee considered the case as per agenda and decided to fix<br>per written comments dated 16.10.2020 given by Consultant (SKB) and on the<br>the technical members as under:						the ad-hoc norms as<br>recommendations of
	<br>ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	85049090	GISheet Metal<br>Components<br>containing<br>20,81,656 rivets<br>and fasteners		2,50,350<br>Number	73182990	Rivets &<br>Fasteners	20,81,656<br>Number on net to<br>net basis
	Note:<br>1. The quantity of export item may be amended as 2,50,350 Number.<br>2. The word“GI” may be added in the description of export item.<br>3. Value addition to be not less than 1286%<br>RA concerned maytake suitable consequential action accordingly.

8 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Case No.:5/15/81-	Party Name: PARAM	Meet No/Date:9/81-	Status:
ALC2/2019	INDUSTRIES	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310832140
:01/81/050/00274/AM20/	:03/95/040/00693/AM20/	10.10.2019
HQ E-office Computer No.:
24695

	Case No.:5/15/81-<br>ALC2/2019	Party Name: PARAM<br>INDUSTRIES	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00274/AM20/<br>HQ E-office Computer No.:<br>24695	<br>RLA File<br>:03/95/040/00693/AM20/	Lic.No/Date:0310832140<br>10.10.2019
23	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>repeat basis as approved for AA No. 0310831055 dated 19.08.2019 in Meeting No. 08/81 dated<br>29.09.2020 as per comments given by MSME via email dated 26.10.2020 as under:<br>ITCHS<br>Code<br>Export Item<br>QuantityITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>73182990<br>Stainless Steel semi<br>finished perforated<br>strips Grade 304 / 316 /<br>410 / 201 / 409 / 430<br>(net content of Stainless<br>Steel Secondary Sheet /<br>Coils 32.000 MT)<br>32 MT<br>72199090<br>Stainless Steel<br>Secondary<br>Sheet / Coils<br>Grade 304 / 316<br>/ 410 / 201 / 409<br>/ 430 of same<br>thickness<br>2.55 Kgs/Kg<br>content in the<br>export product<br>after taking<br>0.776Kg/Kg<br>recovery<br>(1/3rd) from<br>scrap<br>Note: The applicant should only imports secondary sheets/coils and export consist of SS<br>perforated strips with perforated Pattern No. SSPS/PI-02.<br>RA concerned maytake suitable consequential action accordingly.

24	Case No.:6/15/81-ALC2/2019	Party Name: PARAM<br>INDUSTRIES	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00275/AM20/<br>HQ E-office Computer No.:<br>24697	RLA File<br>:03/95/040/00691/AM20/	Lic.No/Date:0310832141<br>10.10.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 01.10.2020. However, no reply<br>has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the<br>requisite information.<br>The case stands deferred.

25	Case No.:3/15/81-ALC2/2019	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00272/AM20/<br>HQ E-office Computer No.:<br>24698	RLA File<br>:03/95/040/00618/AM20/	Lic.No/Date:0310832137<br>10.10.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by DPIIT was sent to the applicant on 20.05.2020 followed by reminders<br>on 05.08.2020 & 01.10.2020. However,the applicant vide email dated 26.10.2020 requested for

9 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

extension of time to one month to furnish the reply of deficiency letter. Hence, the Committee decided to wait for reply of the applicant.

26	Case No.:11/15/81-<br>ALC2/2019	Party Name: SHIVAM IRON<br>AND STEEL COMPANY<br>LIMITED<br>RLA File<br>:02/24/040/00099/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00280/AM20/<br>HQ E-office Computer No.:<br>23309		Lic.No/Date:0210209475<br>14.10.2019	Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by Consultant (SKB):<br>1. How much quantity of Ferro Manganese slag is used in total charge mix (Manganese ore and<br>Ferro manganese slag)?<br>2. What is the percentage of MnO in Ferro Manganese slag?<br>3. How much slag will be produced by production of 1000 MT Ferro Manganese to be exported<br>under AA?<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 26 furnish following information as per comments given by Consultant (SKB):

Case No.:1/18/81-	Party Name: MODISON	Meet No/Date:9/81-	Status:
ALC2/2019	METALS LTD.	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310832497
:01/81/050/00295/AM20/	:03/95/040/00712/AM20/	30.10.2019
HQ E-office Computer No.:
24723

	Case No.:1/18/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00295/AM20/<br>HQ E-office Computer No.:<br>24723	Case No.:1/18/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00295/AM20/<br>HQ E-office Computer No.:<br>24723	Case No.:1/18/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00295/AM20/<br>HQ E-office Computer No.:<br>24723	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Party Name: MODISON<br>METALS LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
				RLA File<br>:03/95/040/00712/AM20/				Lic.No/Date:0310832497<br>30.10.2019
2<br>7	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by DHI as under:
	ITCHS<br>Code	Export Item	Quantity		Sl.<br>No.	ITCHS<br>Code	Import Item		Recommended<br>Quantity
	85389000	Copper<br>Tungsten<br>Contact	33019<br>Kgs		1	81011100	Tungsten Metal<br>Powder		5565 Kgs with net<br>wastage of 8.5% after<br>50% recovery
					2	74031100	Electrolytic<br>Copper Cathode		17627 Kgs with net<br>wastage of 33% after<br>50%recovery
	Note: Export weight may be amended to 33019Kgs & the same to be incorporated in the AA.<br>RA concerned maytake suitable consequential action accordingly.

28	<br>Case No.:2/18/81-ALC2/2019	Party Name: LM WIND<br>POWER BLADES INDIA<br>PVT. LTD<br>RLA File<br>:34/24/040/00224/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00296/AM20/		Lic.No/Date:3410045571<br>31.10.2019	Action by :<br>Applicant

10 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

HQ E-office Computer No.: 24724

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 01.10.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

29	Case No.:5/18/81-ALC2/2019	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00299/AM20/<br>HQ E-office Computer No.:<br>24725	RLA File<br>:03/95/040/00741/AM20/	Lic.No/Date:0310832533<br>31.10.2019	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by DPIIT was sent to the applicant on 20.05.2020 followed by reminders<br>on 05.08.2020 & 01.10.2020. However, the applicant vide email dated 26.10.2020 requested for<br>extension of time to one month to furnish the reply of deficiency letter. Hence, the Committee decided<br>to wait for reply of the applicant.<br>The case stands deferred.

30	Case No.:9/18/81-ALC2/2019	Party Name: NUCON<br>AMETRA ELECTRONICS<br>SYSTEMS PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00303/AM20/<br>HQ E-office Computer No.:<br>24726	RLA File<br>:09/24/040/00389/AM20/	Lic.No/Date:0910068160<br>05.11.2019	<br>Action by :<br>MeitY
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MeitY on 20.08.2020 & 09.10.2020 for examination of the case. However, no comments have<br>been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.<br>The case stands deferred.

31	Case No.:16/18/81-<br>ALC2/2019	Party Name: LM WIND<br>POWER BLADES INDIA<br>PVT. LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00310/AM20/<br>HQ E-office Computer No.:<br>24727	RLA File<br>:34/24/040/00232/AM20/	Lic.No/Date:3410045603<br>13.11.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-1) was sent to the applicant on 01.10.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.

11 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

32	Case No.:20/18/81-<br>ALC2/2019	Party Name: LM WIND<br>POWER BLADES INDIA<br>PVT. LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00314/AM20/<br>HQ E-office Computer No.:<br>24731	RLA File<br>:34/24/040/00246/AM20/	Lic.No/Date:3410045611<br>14.11.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-1) was sent to the applicant on 01.10.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

33	Case No.:17/18/81-<br>ALC2/2019	Party Name: PEARL<br>INSULATIONS PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00311/AM20/<br>HQ E-office Computer No.:<br>24733	RLA File<br>:07/24/040/00177/AM20/	Lic.No/Date:0710115682<br>14.11.2019	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 05.12.2019<br>followed by reminders on 13.03.2020 & 01.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

34	Case No.:23/18/81-<br>ALC2/2019	Party Name: DEWAN &<br>SONS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00317/AM20/<br>HQ E-office Computer<br>No.:24734	RLA File<br>:05/23/040/00288/AM20/	Lic.No/Date:0510412532<br>18.11.2019	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by Consultant (TEC-1):<br>1. Net weight of export indicating weight of faucet and weight of jar separately.<br>2. Details of indigenous input along with weight.<br>3. Manufacturing process with wastage if any.<br>4. Catalogue of import.<br>5. Photograph of export product.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 34 furnish following information as per comments given by Consultant (TEC-1):

12 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Case No.:31/18/81-	Party Name: RAJHANS	Meet No/Date:9/81-	Status:
ALC2/2019	METALS PVT. LIMITED	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:2410042932
:01/81/050/00325/AM20/	:24/24/040/00036/AM20/	22.11.2019
HQ E-office Computer No.:
24735

	Case No.:31/18/81-<br>ALC2/2019<br> <br> <br>HQ File<br>:01/81/050/00325/AM20/<br>HQ E-office Computer No.:<br>24735<br> <br>	Party Name: RAJHANS<br>METALS PVT. LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
		RLA File<br>:24/24/040/00036/AM20/	Lic.No/Date:2410042932<br>22.11.2019
35	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 15.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export<br>Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>74032100<br>Brass<br>Billet<br>250000<br>Kgs<br>74040022 Brass Scrap (Honey<br>Grade As Per ISRI)<br>1.06Kgs/Kg on net<br>content of brass in the<br>exportproduct<br>Note:<br>1. Export item (Brass Billets) should contain- Copper: 61 %, Lead: 3.5% & Zinc: 35.5%.<br>2. Import item (Brass Scrap–Honey Grade as Per ISRI) should contain- Copper: 52-62%,<br>Lead: 2-3.5% & Zinc: 32-40 %.<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:39/18/81-<br>ALC2/2019	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
HQ File<br>:01/81/050/00333/AM20/<br>HQ E-office Computer No.:<br>24783	Lic.No/Date:0710115756<br>27.11.2019	<br>Action by :<br>Applicant
<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to
furnish following information as per comments given by MSME:

1. To specify the quantity of scrap generated and sold for above AA from the detail provided.<br>2. As per documents provided by firm invoice date for invoice number 91324998, 91326684,<br>91330341, 91330340, 91330362 are before date of issuance of Advance Authorization i.e.<br>27.11.2019. Please provide clarification for the same.<br>The case stands deferred.

36 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

37	Case No.:45/18/81-<br>ALC2/2019	Party Name: DISHA AUTO<br>COMPONENTS PVT. LTD.<br>RLA File<br>:03/94/040/00675/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00339/AM20/<br>HQ E-office Computer No.:<br>24786		Lic.No/Date:0310833218<br>04.12.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 01.10.2020.<br>However,no replyhas been receivedyet. Therefore,the Committee decided to remind the applicant

13 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

for furnishing the requisite information.

38	Case No.:2/21/81-ALC2/2019	Party Name: SUKRUT<br>ELECTRIC COMPANY<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00377/AM20/<br>HQ E-office Computer No.:<br>24788	RLA File<br>:31/83/040/00119/AM20/	Lic.No/Date:3110067639<br>30.12.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that the deficiency letter<br>seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 01.10.2020<br>& 21.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for<br>reply of the applicant.<br>The case stands deferred.

39	Case No.:4/21/81-ALC2/2019	Party Name: KUNJ<br>FORGINGS PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00379/AM20/<br>HQ E-office Computer No.:<br>24794	RLA File<br>:05/23/040/00379/AM20/	Lic.No/Date:0510413153<br>31.12.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 01.10.2020. However, no reply<br>has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the<br>requisite information.<br>The case stands deferred.

Case No.:6/21/81-ALC2/2019	Party Name: NORDEX	Meet No/Date:9/81-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:0710115967	Action by :
:01/81/050/00381/AM20/	:07/24/040/00234/AM20/	01.01.2020	Applicant
HQ E-office Computer No.:
24795

Decision: The Committee considered the case as per agenda and Consultant (TEC-1) informed that 40 the applicant’s reply dated 07.10.2020 is deficient due to following reasons:

To provide clarification for why the net weight of export indicated in application is 11,46,934.22Kg , while as per material balance furnished weight indicated is 1192,655.32Kg.
Percentage of non volatile matter in chemical items in Sl. No. 23 to 28 & 30 to 31 is ranging from 69.3% to 80% as such wastage should be minimum 20% (volatile matter), but in material balance chart wastage shown is only 7.5% which is not possible. Hence, provide revised material balance and wastage chart to match with net weight of export.
The list of consumables furnished is not correct, since items indicated in the list are raw

14 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

materials and these are not totally consumed in the process of manufacture.

Therefore, the Committee decided to ask from the applicant to provide clarification for above mentioned deficiencies as per comments of Consultant (TEC-1).

Case No.:11/21/81-	Party Name: LOTUS	Meet No/Date:9/81-	Status:
ALC2/2019	AVIATION TECHNOLOGY	ALC2/2020	Rejected
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:0510413205
:01/81/050/00386/AM20/	:05/23/040/00391/AM20/	03.01.2020
HQ E-office Computer No.:
24796

41 Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 14.01.2020 followed by reminders on 22.05.2020, 06.08.2020 & 01.10.2020. Therefore, the Committee decided to reject the case under intimation to RA, New Delhi.

42	Case No.:15/21/81-<br>ALC2/2019	Party Name: PARAM<br>INDUSTRIES	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00390/AM20/<br>HQ E-office Computer No.:<br>24797	RLA File<br>:03/95/040/00943/AM20/	Lic.No/Date:0310833956<br>07.01.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 01.10.2020. However, no reply<br>has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the<br>requisite information.<br>The case stands deferred.

43	Case No.:1/24/81-ALC2/2019	Party Name: RATNAVEER<br>METALS LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00438/AM20/<br>HQ E-office Computer No.:<br>24798	RLA File<br>:34/24/040/00220/AM20/	Lic.No/Date:3410045891<br>19.02.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 15.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

15 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Case No.:2/24/81-	Party Name: GOLD METAL	Meet No/Date:9/81-	Status:
ALC2/2019	EXTRUSION	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:2410043023
:01/81/050/00439/AM20/	:24/24/040/00056/AM20/	20.02.2020
HQ E-office Computer No.:
24799

	Case No.:2/24/81-<br>ALC2/2019	Party Name: GOLD METAL<br>EXTRUSION	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00439/AM20/<br>HQ E-office Computer No.:<br>24799	RLA File<br>:24/24/040/00056/AM20/	Lic.No/Date:2410043023<br>20.02.2020
44	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 15.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export<br>Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>74032100<br>Brass<br>Billets<br>250000<br>Kgs<br>74040022Brass Scrap<br>(Honey Grade)<br>1.06Kgs/Kg on net<br>content of brass in the<br>exportproduct<br>Note:<br>1. Export item (Brass Billets) should contain- Copper: 57-61 %, Lead: 2-3.5% & Zinc: 33-<br>35.5%).<br>2. Import item (Brass Scrap–Honey Grade as Per ISRI) should contain- Copper: 57-61%,<br>Lead: 2-3.5% & Zinc: 33-35.5 %.<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.

45	Case No.:3/24/81-<br>ALC2/2019	Party Name: MITTAL<br>APPLIANCES LIMITED<br> <br>RLA File<br>:56/24/040/00037/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Withdrawn
	<br>HQ File<br>:01/81/050/00440/AM20/<br>HQ E-office Computer No.:<br>25026		Lic.No/Date:5610005825<br>20.02.2020
	Decision:The Committee considered the case as per agenda and noted that the applicant vide email
	dated 07.10.2020 informed that they have not used the advance licence and will surrender it to RA,
	Indore. Therefore, the Committee decided towithdrawthe case from the agenda under intimation to
	RA, Indore. (Copy enclosed)
	The case is withdrawn.

Decision: The Committee considered the case as per agenda and noted that the applicant vide email dated 07.10.2020 informed that they have not used the advance licence and will surrender it to RA, Indore. Therefore, the Committee decided to withdraw the case from the agenda under intimation to RA, Indore. (Copy enclosed)

Case No.:4/24/81-<br>ALC2/2019	Case No.:4/24/81-<br>ALC2/2019	Party Name: TAMRA<br>DHATU UDYOG PRIVATE<br>LIMITED	Party Name: TAMRA<br>DHATU UDYOG PRIVATE<br>LIMITED	Party Name: TAMRA<br>DHATU UDYOG PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
<br>HQ File<br>:01/81/050/00441/AM20/<br>HQ E-office Computer No.:<br>25027		RLA File<br>:02/24/040/00189/AM20/			Lic.No/Date:0210209779<br>20.02.2020
Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by DPIIT vide U. O. No.: P-47011/93/2020-TSW dated 09.09.2020 as<br>under:<br>ITCHS<br>Export Item<br>Quantity ITCHS<br>Import Item<br>Recommended
ITCHS	Export Item	Quantity	ITCHS	Import Item		Recommended

16 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Code			Code		Quantity
74199990	Copper Nuggets<br>Non -Ferrous	25000<br>Kgs	74081190	Copper Wire Rod<br>Non -Ferrous	1.01Kgs/Kg content<br>in the exportproduct

Case No.:5/24/81-	Party Name: TOSHIBA	Meet No/Date:9/81-	Status:
ALC2/2019	TRANSMISSION &	ALC2/2020	Approved
	DISTRIBUTION SYSTEMS	20.10.2020
HQ File	RLA File	Lic.No/Date:0910068506
:01/81/050/00442/AM20/	:09/24/040/00571/AM20/	21.02.2020
HQ E-office Computer
No.: 25028

	Case No.:5/24/81-<br>ALC2/2019	Case No.:5/24/81-<br>ALC2/2019	Case No.:5/24/81-<br>ALC2/2019	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
	HQ File<br>:01/81/050/00442/AM20/<br>HQ E-office Computer<br>No.: 25028			RLA File<br>:09/24/040/00571/AM20/		Lic.No/Date:0910068506<br>21.02.2020
47	Decision:The Committee considered the case as per agenda and decided to fix the following ad-hoc<br>norms on repeat basis as approved for AA No. 0910066988 dated 20.12.2018 for import item at Sl.<br>No. 1, 2 & 4 as per written comments given by DHI:
	Sl.<br>No.	ITCHS<br>Code	Import Item		Recommended Quantity
	1	72251100	CRGO Silicon Electrical Steel<br>Coils-IS 3024-2015		1.035 Kgs/Kg content in the export product<br>or as applied, whichever is lower.
	2	76011040	Aluminium Wire Rods		1.01 Kgs/Kg content in the export product<br>or as applied, whichever is lower.
	3	76061190	Aluminium Sheet		1.01 Kgs/Kgcontent in the exportproduct
	4	27101990	Transformer Oil		Net to Net
	5	85049010	Plugin Bushings		As perGN-4withaccountability clause<br>withno wastageonweight & number<br>terms
	6	85049010	Top CoverGasket
	7	85049010	ValvewithOil DrainCast Iron
	Note: The grade & thickness should match for import items at Sl. No. 1 with export items.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:6/24/81-	Party Name: TOSHIBA	Meet No/Date:9/81-	Status:
ALC2/2019	TRANSMISSION &	ALC2/2020	Approved
	DISTRIBUTION SYSTEMS	20.10.2020
HQ File	RLA File	Lic.No/Date:0910068507
:01/81/050/00443/AM20/	:09/24/040/00572/AM20/	21.02.2020
HQ E-office Computer No.:
25029

Decision: The Committee considered the case as per agenda and decided to fix the following ad-hoc 48 norms on repeat basis as approved for AA No. 0910066988 dated 20.12.2018 for import item at Sl. No. 1, 2 & 4 to 6 as per written comments given by DHI:

Sl.	ITCHS	Import Item	Recommended Quantity
No.	Code
1	72251100	CRGO Silicon Electrical Steel<br>Coils-IS 3024-2015	1.035 Kgs/Kg content in the export product<br>or as applied,whichever is lower.
2	76011040	Aluminium Wire Rods	1.01 Kgs/Kg content in the export product<br>or as applied,whichever is lower.
3	76061190	AluminiumSheet	1.01 Kgs/Kgcontent in the exportproduct

17 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

4	27101990	Transformer Oil	Net to Net
5	32089021	Paint	2% of FoB value of export
6	38140010	Thinner
7	85049010	LVBushingAssembly	As perGN-4withaccountability clause<br>withno wastageonweight & number<br>terms
8	85049010	Plugin Bushings
9	85049010	Off Load Tap-Changer
10	85049010	ValvewithOil DrainCast Iron
11	85049010	RatingPlates
12	85049010	Rollers
Note: The grade & thickness should match for import items at Sl. No. 1 with export items.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:13/24/81-	Party Name: MITTAL	Meet No/Date:9/81-	Status:
ALC2/2019	APPLIANCES LIMITED	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:5610005827
:01/81/050/00450/AM20/	:56/24/040/00038/AM20/	25.02.2020
HQ E-office Computer No.:
25030

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 15.10.2020 given by Consultant (SKB) and the recommendations of the Technical members as under:

<br>ITCHS<br>Code	Export<br>Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74031300	Refined<br>Copper<br>Billets	350 MT	74040012	Copper Scrap Birch/ Cliff/<br>Berry Candy/ Cobra/<br>Clove/ Cocoa/ Barley as<br>per ISRI	1.03Kgs/Kg<br>content in the<br>export product

Note:

1. Minimum Copper content in the export item is 99.00%.

2. Average Copper content in the import item is 97.00%.

50	Case No.:12/24/81-<br>ALC2/2019	Party Name: SIECHEM<br>TECHNOLOGIES PRIVATE<br>LIMITED<br>RLA File<br>:04/24/040/00184/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00449/AM20/<br>HQ E-office Computer No.:<br>25031		Lic.No/Date:0410166566<br>26.02.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-1/TEC-3) was sent to the applicant on 01.10.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

18 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

51	Case No.:15/24/81-<br>ALC2/2019	Party Name: DIACH<br>CHEMICALS & PIGMENTS<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00452/AM20/<br>HQ E-office Computer No.:<br>25032	RLA File<br>:02/24/040/00197/AM20/	Lic.No/Date:0210209796<br>27.02.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 01.10.2020. However, no reply<br>has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the<br>requisite information.<br>The case stands deferred.

52	Case No.:18/24/81-<br>ALC2/2019	Party Name: KALPATARU<br>POWER TRANSMISSION<br>LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00455/AM20/<br>HQ E-office Computer No.:<br>25033	RLA File<br>:08/24/040/00382/AM20/	Lic.No/Date:0810147363<br>28.02.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 01.10.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

53	Case No.:16/24/81-<br>ALC2/2019	Party Name: WAAREE<br>ENERGIES LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00453/AM20/<br>HQ E-office Computer No.:<br>25034	RLA File<br>:52/24/040/00074/AM20/	Lic.No/Date:5210043347<br>28.02.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 01.10.2020.<br>However, no reply has been received yet. Therefore, the Committee decided to remind the applicant<br>for furnishing the requisite information.<br>The case stands deferred.

54	Case No.:21/24/81-<br>ALC2/2019	Party Name: RAJHANS<br>IMPEX PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00458/AM20/<br>HQ E-office Computer No.:<br>25035	RLA File<br>:24/24/040/00060/AM20/	Lic.No/Date:2410043047<br>03.03.2020	<br>Action by :<br>Applicant

19 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 06.08.2020 followed by a reminder on 01.10.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

Case No.:2/3/81-ALC2/2020	Party Name: SELP INDIA	Meet No/Date:9/81-	Status:
	PVT. LTD.	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310835853
:01/81/050/00501/AM21/	:03/95/040/00019/AM21/	25.04.2020
HQ E-office Computer No.:
25036

Decision: The Committee considered the case as per the agenda and noted the written comments given by MeitY vide U. O. No.: W-21/3/2020-IPHW-MeitY dated 15.10.2020. The matter was deliberated in the meeting. On the advice of Consultant (TEC-1), the Committee decided to fix the 55 ad-hoc norms as under:

Quantity of import item ( PVC Sheet ) at Sl. No. 1 may be allowed with 5% wastage.
Quantity of import item ( Overlay Sheet- (PVC )) at Sl. No. 2 may be allowed with 5% wastage.
Quantity of import item ( Inlay for Payment IC Module ) at Sl. No. 3 may be allowed with 5% wastage.
Quantity of import item ( Integrated Circuit- (SECORA TM Pays COM/GTA 6 Pin AU at Sl. No. 5 may be allowed on net to net basis with accountability clause .
Quantity of import items at Sl. No. 4, 6, 7 & 8 may be allowed may be deleted as these items procured indigenously.

Case No.:3/3/81-ALC2/2020	Party Name: SELP INDIA	Meet No/Date:9/81-	Status:
	PVT. LTD.	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310835959
:01/81/050/00502/AM21/	:03/95/040/00032/AM21/	26.04.2020
HQ E-office Computer No.:
25037

Quantity of import item ( PVC Sheet ) at Sl. No. 1 may be allowed with 5% wastage.
Quantity of import item ( Overlay Sheet- (PVC )) at Sl. No. 2 may be allowed with 5% wastage.
Quantity of import item ( SUBLAM PVC 150UM ) at Sl. No. 3 may be allowed with 5% wastage.
Quantity of import item ( Inlay ) at Sl. No. 4 may be allowed with 5% wastage.
Quantity of import item ( SCOTV13.3 HRC4PG-(Integrated Circuit ) at Sl. No. 6 may be allowed on net to net basis with accountability clause .
Quantity of import items at Sl. No. 5 & 7 may be allowed may be deleted as these items

20 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

procured indigenously.

Case No.:5/3/81-ALC2/2020	Party Name: RAJHANS	Meet No/Date:9/81-	Status:
	IMPEX PRIVATE	ALC2/2020	Approved
	LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:2410043085
:01/81/050/00504/AM21/	:24/24/040/00002/AM21/	28.04.2020
HQ E-office Computer No.:
25038

	Case No.:5/3/81-ALC2/2020 <br> <br> <br>HQ File<br>:01/81/050/00504/AM21/<br>HQ E-office Computer No.:<br>25038<br> <br>	Party Name: RAJHANS<br>IMPEX PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
		RLA File<br>:24/24/040/00002/AM21/	Lic.No/Date:2410043085<br>28.04.2020
57	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 15.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export<br>Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>74032100<br>Brass<br>Billets<br>100 MT<br>74040022 Brass scrap<br>Honey grade<br>1.06Kgs/Kg on net content of<br>brass in the exportproduct<br>Note:<br>1. Export item (Brass Billets) should contain- 58% Minimum, Lead: 3% Minimum & Zinc:<br>37.30% Minimum.<br>2. Import item (Brass Scrap–Honey Grade as Per ISRI) should contain- Copper: 51-61%,<br>Lead: 2-3.5% & Zinc: 33-35.5 %.<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.

58	Case No.:10/3/81-ALC2/2020	Party Name: JAIN FGL<br>METAL INDUSTRIES<br>RLA File<br>:04/24/040/00005/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00509/AM21/<br>HQ E-office Computer No.:<br>25039		Lic.No/Date:0410166701<br>29.04.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 06.08.2020 followed by a<br>reminder on 07.10.2020. Further, some additional information received from the applicant was sent to<br>MSME on 26.10.2020. However, no reply has been received yet against the deficiency letter.<br>Therefore, the Committee decided to wait for reply of the applicant.<br>The case stands deferred.

59	Case No.:15/3/81-ALC2/2020	Party Name: R T JAIN &<br>COMPANY<br>RLA File<br>:03/95/040/00037/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00514/AM21/<br>HQ E-office Computer No.:<br>25042		Lic.No/Date:0310836059<br>01.05.2020	<br>Action by :<br>Applicant

21 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by Consultant (SKB):

What is the percentage of Copper in Copper Wire scrap?
What is the market value of PVC/Rubber coming along with Copper wire scarp?
What is the range of percentage of Copper in Copper wire scarp when minimum Copper is 40%?

Case No.:14/3/81-ALC2/2020 Party Name: REEP Meet No/Date:9/81- Status: INDUSTRIES PVT. LTD. ALC2/2020 Deferred 20.10.2020 HQ File RLA File Lic.No/Date:0410166711 Action by : :01/81/050/00513/AM21/ :04/24/040/00008/AM21/ 01.05.2020 Applicant HQ E-office Computer No.: 25040 60

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by DPIIT vide U. O. No. P-47011/95/2020TSW dated 21.10.2020:

Sl. No. 11 of the Standard Deficiency Format.

61	Case No.:12/3/81-ALC2/2020	Party Name: ZOBELE INDIA<br>PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00511/AM21/<br>HQ E-office Computer No.:<br>25043	RLA File<br>:03/95/040/01153/AM20/	Lic.No/Date:0310836043<br>01.05.2020	<br>Action by :<br>MeitY
	Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to MeitY on 19.10.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

62	Case No.:18/3/81-ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00517/AM21/<br>HQ E-office Computer No.:<br>25044	RLA File<br>:03/94/040/00001/AM21/	Lic.No/Date:0310836093<br>04.05.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to Consultant (TEC-3) on 15.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

22 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Case No.:19/3/81-ALC2/2020	Party Name: APAR	Meet No/Date:9/81-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310836094	Action by :
:01/81/050/00518/AM21/	:03/94/040/00026/AM21/	04.05.2020	Applicant
HQ E-office Computer No.:
25173

63 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information for export item at Sl. No. 60 as per comments given by Consultant (TEC-3):

Weight of export item.
Calculations of requirement of inputs with cross sectional diameter.
Details of indigenous inputs.

64	Case No.:16/3/81-ALC2/2020	Party Name: TRANSCON<br>INDUSTRIES<br>RLA File<br>:09/24/040/00040/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00515/AM21/<br>HQ E-office Computer No.:<br>25048		Lic.No/Date:0910068722<br>04.05.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 22.05.2020<br>followed by reminders on 07.08.2020 & 02.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

Case No.:20/3/81-	Party Name: GOLD METAL	Meet No/Date:9/81-	Status:
ALC2/2020	EXTRUSION	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:2410043093
:01/81/050/00519/AM21/	:24/24/040/00004/AM21/	06.05.2020
HQ E-office Computer No.:
25049

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 65 per written comments dated 15.10.2020 given by Consultant (SKB) as under:

ITCHS<br>Code	Export<br>Item	Quantity	ITCHS<br>Code	Import Item	Recommended Quantity
74032100	Brass<br>Billets	200000<br>Kgs	74040022	Brass Scrap<br>(Honey Grade)	1.06Kgs/Kg on net<br>content of brass in the<br>exportproduct

Note:

1. Export item (Brass Billets) should contain- Copper: 57-61 %, Lead: 2-3.5% & Zinc: 3335.5%).

23 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

2. Import item (Brass Scrap –Honey Grade as Per ISRI) should contain- Copper: 57-61%, Lead: 2-3.5% & Zinc: 33-35.5 %.

3. Composition of brass to match both for imports and exports.

Case No.:17/3/81-ALC2/2020 Party Name: JINDAL SAW Meet No/Date:9/81- Status: LIMITED ALC2/2020 Deferred 20.10.2020 HQ File RLA File Lic.No/Date:0510414105 Action by : :01/81/050/00516/AM21/ :05/23/040/00012/AM21/ 06.05.2020 Applicant HQ E-office Computer No.: 25052

66 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (TEC-3):

Coating thickness of each layer as per purchase order.
Surface area of pipes to be coated.
To provide explanation for, why the import items at Sl. No. 2 & 3 are same.

67	Case No.:21/3/81-ALC2/2020	Party Name: SHREE<br>BHAVANI EXTRUSION	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00520/AM21/<br>HQ E-office Computer No.:<br>25054	RLA File<br>:24/24/040/00005/AM21/	Lic.No/Date:2410043094<br>08.05.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (SKB) was sent to the applicant on 07.08.2020 followed<br>by a reminder on 02.10.2020. However, no reply has been received yet. Therefore, the Committee<br>decided to remind again the applicant for furnishing the requisite information.<br>The case stands deferred.

68	Case No.:24/3/81-ALC2/2020	Party Name: LLOYD<br>INSULATIONS (INDIA)<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00523/AM21/<br>HQ E-office Computer No.:<br>25055	RLA File<br>:04/24/040/00010/AM21/	Lic.No/Date:0410166730<br>11.05.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 22.05.2020<br>followed by reminders on 07.08.2020 & 04.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

24 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

69	Case No.:23/3/81-ALC2/2020	Party Name: RHJ TUBES<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00522/AM21/<br>HQ E-office Computer No.:<br>25058	RLA File<br>:03/95/040/00067/AM21/	Lic.No/Date:0310836165<br>11.05.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 22.05.2020<br>followed by reminders on 07.08.2020 & 04.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

70	Case No.:25/3/81-ALC2/2020	Party Name:<br>WINOMECHANIC<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00524/AM21/<br>HQ E-office Computer No.:<br>25059	RLA File<br>:04/24/040/00006/AM21/	Lic.No/Date:0410166746<br>12.05.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 26.05.2020<br>followed by reminders on 07.08.2020 & 04.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

71	Case No.:26/3/81-ALC2/2020	Party Name:<br>WINOMECHANIC<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00525/AM21/<br>HQ E-office Computer No.:<br>25060	RLA File<br>:04/24/040/00017/AM21/	Lic.No/Date:0410166751<br>12.05.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 26.05.2020<br>followed by reminders on 07.08.2020 & 04.10.2020. However, no information has been received yet.<br>Therefore, the Committee decided to grant last opportunity to the applicant for submitting the<br>complete set of application.<br>The case stands deferred.

72	<br>Case No.:1/6/81-ALC2/2020	Party Name: KEI<br>INDUSTRIES LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQFile	RLA File	Lic.No/Date:0510414582	Action by :

25 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

:01/81/050/00628/AM21/ :05/23/040/00066/AM21/ 08.07.2020 HQ E-office Computer No.: 25061

Applicant

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 04.10.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

73	Case No.:2/6/81-ALC2/2020	Party Name: NAVGRAH<br>FASTNERS PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00629/AM21/<br>HQ E-office Computer No.:<br>25062	RLA File<br>:52/24/040/00022/AM21/	Lic.No/Date:5210043453<br>08.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by Consultant (TEC-3):<br>1. Max. & min. ID/OD ratio of washers to be exported under this AA.<br>2. Max. & min. OD of washers to be exported under this AA.<br>3. Range of thickness of sheet required to meet export order.<br>4. No. of sizes of washers to be exported under this AA.<br>5. Wastage claimed is 119% while average past wastage is 90-92%. Please provide explanation.<br>6. Copy of export order.<br>7. Copy of Advance Authorization.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (TEC-3): 73

74	Case No.:4/6/81-ALC2/2020	Party Name: METAL CARE<br>ALLOYS PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00631/AM21/<br>HQ E-office Computer No.:<br>25064	RLA File<br>:03/95/040/00218/AM21/	Lic.No/Date:0310837128<br>10.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and decided to seek from the<br>applicant to furnish the following information as per comments given by Consultant (SKB):<br>1. What is the chemical composition of Bronze Ingots?<br>2. What is the percentage of Copper in Copper wire scrap?<br>3. What is the market value of PVC/Rubber coming along with Copper wire scarp?<br>4. What is the range of percentage of Copper in Copper wire scarp when minimum Copper is 40%?<br>The case stands deferred.

74 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by Consultant (SKB):

Case No.:6/6/81-ALC2/2020 Party Name: METALIC Meet No/Date:9/81- Status: 7 IMPRESSIONS (INDIA) ALC2/2020 Approved 5 PVT LTD 20.10.2020

26 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

HQ File RLA File Lic.No/Date:0510414604 :01/81/050/00633/AM21/ :05/24/040/00169/AM21/ 10.07.2020 HQ E-office Computer No.: 25065

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on the recommendation of Consultant (TEC-1) as under:

ITCHS	Export Item	Quantity	ITCHS	Import	Recommended
Code			Code	Item	Quantity
	Mobile Window (3636600 Pcs)				1.05 Kgs/Kg
85177090	Made Out of Hard Coated<br>Acrylic Sheet Duly Printed &<br>Laminated (0.70 Mm To 1.50	15000<br>Kgs	39205119	Acrylic<br>Sheet	content in the<br>export product
	Mm)

Note:

1. The size of import item should be 1200x1650mm.

2. The import item should be of relevant thickness.

Case No.:7/6/81-ALC2/2020	Party Name: JAIN	Meet No/Date:9/81-	Status:
	RECYCLING PRIVATE	ALC2/2020	Approved
	LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:3210079597
:01/81/050/00634/AM21/	:32/24/040/00022/AM21/	13.07.2020
HQ E-office Computer No.:
23354

	Case No.:7/6/81-ALC2/2020	Case No.:7/6/81-ALC2/2020	Case No.:7/6/81-ALC2/2020	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Party Name: JAIN<br>RECYCLING PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
	HQ File<br>:01/81/050/00634/AM21/<br>HQ E-office Computer No.:<br>23354			RLA File<br>:32/24/040/00022/AM21/				Lic.No/Date:3210079597<br>13.07.2020
7<br>6	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 15.10.2020 given by Consultant (SKB) and the recommendations of the<br>Technical members as under:
	Sl.<br>No.	ITCHS<br>Code	Export Item		Quantity	Sl.<br>No.	ITCHS<br>Code		Import<br>Item	Recommended<br>Quantity
	1	74031300	Refined Copper<br>Billets Min Cu<br>Content - 99.00%		372659<br>Kgs	1	74040012		Copper<br>scrap	1.03Kgs/Kg on<br>net content of<br>copper in the<br>exportproduct
	2	74040012	Copper Scrap as<br>per ISRI Code<br>Barely, Berry,<br>Birch, Clove,<br>Cobra, Cocoa<br>Min Cu Content -<br>99%		196136<br>Kgs	2	74040012		Copper<br>Scrap as<br>per ISRI<br>Code<br>"Druid"	1.03Kgs/Kg on<br>net content of<br>copper in the<br>export product
	Note:<br>1. Average copper content in the import item at Sl. No. 1 is 95.00%.<br>2. Import item at Sl. No. 2 should contain average copper of 42.50%.<br>RA concerned maytake suitable consequential action accordingly.

77 Case No.:8/6/81-ALC2/2020 Party Name: PARAM Meet No/Date:9/81- Status:

27 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

		INDUSTRIES	ALC2/2020<br>20.10.2020	Deferred
	HQ File<br>:01/81/050/00635/AM21/<br>HQ E-office Computer No.:<br>25084	RLA File<br>:03/95/040/00205/AM21/	Lic.No/Date:0310837191<br>14.07.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020<br>followed by a reminder on 05.10.2020. However, no information has been received yet. Therefore, the<br>Committee decided to remind again the applicant for submitting the complete set of application.<br>The case stands deferred.

Case No.:9/6/81-ALC2/2020	Party Name: UNIVERSAL	Meet No/Date:9/81-	Status:
	CABLES LTD	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:1110028725	Action by :
:01/81/050/00636/AM21/	:11/24/040/00001/AM21/	14.07.2020	Applicant
HQ E-office Computer No.:
25085

Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by DPIIT vide U. O. No.: P- 78 47011/352/2019-TSW dated 22.10.2020:

Detailed calculations for the requirement of each raw material for the export product.
Details of other materials, indigenous or imported, required in the manufacturing of cables.
Use of import item at Sl. No. 6 (High Density Polyethylene) in the export item as MDPE is to be used for the outer sheath and not HDPE.
Net weight per KM of cable including the weight of indigenous inputs.
Material balancing viz. net content of each imported of each imported and indigenous inputs, per KM of export product.

Case No.: Party Name: GAVIRANGA Meet No/Date:9/81- Status: 14/6/81-ALC2/2020 ENTERPRISES ALC2/2020 Deferred 20.10.2020 HQ File RLA File Lic.No/Date:0710116762 Action by : :01/81/050/00641/AM21/ :07/24/040/00109/AM21/ 17.07.2020 MeitY HQ E-office Computer 79 No.: 25086

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MeitY on 12.10.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.

80	<br>Case No.:11/6/81-ALC2/2020	Party Name: JAIN METAL<br>ROLLING MILLS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred

28 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

HQ File RLA File Lic.No/Date:0410166897 Action by : :01/81/050/00638/AM21/ :04/24/040/00035/AM21/ 17.07.2020 Applicant HQ E-office Computer No.: 25087

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 04.10.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

81	Case No.:12/6/81-ALC2/2020	Party Name: PONDY<br>OXIDES AND CHEMICALS<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00639/AM21/<br>HQ E-office Computer No.:<br>25088	RLA File<br>:04/24/040/00043/AM21/	Lic.No/Date:0410166900<br>17.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by MSME:<br>1. As per information received from the applicant, maximum lead percentage in import item is<br>60% which works out to be 287914Kgs while as per licence the export product contains<br>299901Kgs. Hence, provide clarification for the same.<br>The case stands deferred.

81 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

82	Case No.:15/6/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00642/AM21/<br>HQ E-office Computer No.:<br>25089	RLA File<br>:09/24/040/00206/AM21/	Lic.No/Date:0910068967<br>20.07.2020	<br>Action by :<br>TEC-3
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) via email dated 21.09.2020 for examination of the case. Further, physical<br>file of the case also sent to Consultant (TEC-3) to examine the case. However, no comments have<br>been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the<br>comments.<br>The case stands deferred.

83	Case No.:16/6/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00643/AM21/<br>HQ E-office Computer No.:<br>25090	RLA File<br>:09/24/040/00207/AM21/	Lic.No/Date:0910068968<br>20.07.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case asper agenda and noted that a copyof application was

29 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

sent to Consultant (TEC-3) via email dated 21.09.2020 for examination of the case. Further, physical file of the case also sent to Consultant (TEC-3) to examine the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the comments.

84	Case No.:17/6/81-ALC2/2020	Party Name: AXORA<br>RESOURCES LIMITED<br>RLA File<br>:02/24/040/00046/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00644/AM21/<br>HQ E-office Computer No.:<br>25091		Lic.No/Date:0210209991<br>21.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by MSME:<br>1. Percentage of lead in import item.<br>2. Percentage of lead in lead alloy.<br>The case stands deferred.

Case No.:21/6/81-	Party Name: HEALTHICO	Meet No/Date:9/81-	Status:
ALC2/2020	QUALITY PRODUCTS	ALC2/2020	Approved
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:5610005906
:01/81/050/00648/AM21/	:56/24/040/00012/AM21/	21.07.2020
HQ E-office Computer No.:
25093

Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as
per written comments given by Consultant (TEC-3) vide email dated 18.10.2020 as under:
ITCHS<br>Export Item<br>Quantity ITCHS<br>Import Item	Recommended Quantity
Code<br>Code
73231000<br>S. S.<br>65 MT<br>72230099 Stainless Steel	65.65 MT@1.01 Kg/Kg
Scrubber<br>Wire 0.13mm	content in the exportproduct
Note: Grade & diameter of steel wire will be same in import & export.
RA concerned maytake suitable consequential action accordingly.

8 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 5 per written comments given by Consultant (TEC-3) vide email dated 18.10.2020 as under:

86	Case No.:18/6/81-ALC2/2020	Party Name: INDIANA<br>GRATINGS PRIVATE<br>LIMITED<br>RLA File<br>:03/94/040/00281/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00645/AM21/<br>HQ E-office Computer No.:<br>25094		Lic.No/Date:0310837294<br>21.07.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 10.08.2020<br>followed bya reminder on 05.10.2020. However,no information has been receivedyet. Therefore,the

30 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Committee decided to remind again the applicant for submitting the complete set of application.

87	Case No.:19/6/81-ALC2/2020	Party Name: JINDAL SAW<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00646/AM21/<br>HQ E-office Computer No.:<br>25096	RLA File<br>:05/23/040/00084/AM21/	Lic.No/Date:0510414673<br>21.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per comments given by Consultant (TEC-3):<br>1. To provide justification as to why the ITCHS code of import & export items is same.<br>2. To provide explanation as to why Component is proposed to be imported in fraction.<br>3. Sl. No. 3, 4, 5 & 11 of the Standard Deficiency Format.<br>The case stands deferred.

87 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (TEC-3):

88	Case No.:22/6/81-ALC2/2020	Party Name: POLYCAB<br>INDIA LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00649/AM21/<br>HQ E-office Computer No.:<br>25097	RLA File<br>:03/95/040/00232/AM21/	Lic.No/Date:0310837313<br>22.07.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/112/2020-TSW dated 31.08.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/112/2020-TSW dated 31.08.2020. (copy enclosed)

Case No.:20/6/81-	Party Name: SHIVALIK	Meet No/Date:9/81-	Status:
ALC2/2020	BIMETAL CONTROLS	ALC2/2020	Approved
	LTD	20.10.2020
HQ File	RLA File	Lic.No/Date:0510414677
:01/81/050/00647/AM21/	:05/24/040/00185/AM21/	22.07.2020
HQ E-office Computer
No.:25098

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on 89 repeat basis as approved for AA No. 0510410424 dated 30.04.2019 in M. No. 10/81 dated 21.08.2019 as per written comments given by Consultant (TEC-3) vide email dated 18.10.2020 as under:

Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended<br>Quantity
		Controlled Expansion Alloys: Cold Rolled strips of Max.	1.03Kgs/Kg
1	72269952	thickness 2.25 mm, minimum thickness of 1.20mm and<br>upto 80mm width- HE Alloy-alloy-206 Alloy with 20%	content in the<br>export product
		Nickel,6% Manganese and balance Ferrous

31 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

2	81110010	Controlled Expansion Alloys: Cold Rolled strips of Max.<br>thickness 2.25 mm, minimum thickness of 1.20 mm and<br>upto 80mm width- HE Alloy-alloy-72 Alloy with 72%<br>Manganese,10% Nickel and 18%copper	1.03Kgs/Kg<br>content in the<br>export product
3	72269952	Controlled Expansion Alloys: Cold Rolled strips of Max.<br>thickness 2.25 mm, minimum thickness of 1.20mm and<br>upto 80mm width- HE Alloy-Alloy -223 Alloy with 22%<br>Nickel, 3% Chrome&balance Ferrous	1.03Kgs/Kg<br>content in the<br>export product
4	72269952	Controlled Expansion Alloys: Cold Rolled strips of Max.<br>thickness 2.25 mm, minimum thickness of 1.20mm and<br>upto 80mm width- LE Alloy-Alloy-36, Alloy with 36%<br>Nickel & balance Iron	1.03Kgs/Kg<br>content in the<br>export product
5	75061000	Cold Rolled strips of Max. Thickness 2.00 mm &<br>Minimum thickness of 1.20mm and upto 80mm width-<br>Nickel, Nickel InStrips, Nickel 201Strips	1.03Kgs/Kg<br>content in the<br>exportproduct
6	74091100	Cold Rolled strips of Max. Thickness 2.00 mm, &<br>Minimum thickness of 1.20mm and upto 80mm width-<br>Copper,Copper In Strips, (Minimum Purity 99.90%)	1.03Kgs/Kg<br>content in the<br>exportproduct
Note:<br>1. Grade & composition of alloy to match in import & export items.<br>2. Thickness of import items to match thickness of layer of export items <br>RA concerned maytake suitable consequential action accordingly.

90	Case No.:23/6/81-ALC2/2020	Party Name: DIAMOND<br>ENGINEERING (CHENNAI)<br>PVT LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00650/AM21/<br>HQ E-office Computer No.:<br>25099	RLA File<br>:04/24/040/00050/AM21/	Lic.No/Date:0410166916<br>23.07.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/119/2019-TSW dated 20.10.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/119/2019-TSW dated 20.10.2020. (copy enclosed)

91	Case No.:28/6/81-ALC2/2020	Party Name: ACG<br>PHARMAPACK PVT LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00655/AM21/<br>HQ E-office Computer No.:<br>25158	RLA File<br>:03/94/040/00248/AM21/	Lic.No/Date:0310837425<br>27.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and decided to seek from the<br>applicant to furnish the following information as per comments given by DPIIT vide U. O. No.: P-<br>47011/143/2020-TSW dated 19.10.2020:<br>1. Sl. No. 3, 5 & 11 the Standard Deficiency Format.<br>The case stands deferred.

32 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

92	Case No.:29/6/81-ALC2/2020	Party Name: ACG<br>PHARMAPACK PVT LTD	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00656/AM21/<br>HQ E-office Computer No.:<br>25159	RLA File<br>:03/94/040/00249/AM21/	Lic.No/Date:0310837426<br>27.07.2020	<br>Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and decided to seek from the<br>applicant to furnish the following information as per comments given by DPIIT vide U. O. No.: P-<br>47011/143/2020-TSW dated 19.10.2020:<br>1. Sl. No. 3, 5 & 11 the Standard Deficiency Format.<br>The case stands deferred.

93	Case No.:27/6/81-ALC2/2020	Party Name: FCI OEN<br>CONNECTORS LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00654/AM21/<br>HQ E-office Computer No.:<br>25160	RLA File<br>:07/24/040/00089/AM21/	Lic.No/Date:0710116799<br>27.07.2020	<br>Action by :<br>MeitY
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MeitY for examination of the case on 17.08.2020 followed by a reminder on 07.10.2020.<br>However, no comments have been received yet. Hence, the Committee decided to wait for the<br>comments.<br>The case stands deferred.

94	Case No.:1/9/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00745/AM21/<br>HQ E-office Computer No.:<br>25161	RLA File<br>:09/24/040/00333/AM21/	Lic.No/Date:0910069190<br>15.09.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 16.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

95	Case No.:2/9/81-ALC2/2020	Party Name:<br>MAHARASHTRA<br>SEAMLESS LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00746/AM21/<br>HQ E-office Computer<br>No.:25162	RLA File<br>:05/24/040/00285/AM21/	Lic.No/Date:0510415230<br>16.09.2020	<br>Action by :<br>TEC-3

33 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 16.10.2020 & 19.10.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

96	Case No.:3/9/81-ALC2/2020	Party Name:<br>MAHARASHTRA<br>SEAMLESS LIMITED<br>RLA File<br>:05/24/040/00284/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00747/AM21/<br>HQ E-office Computer No.:<br>25166		Lic.No/Date:0510415231<br>16.09.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 16.10.2020 & 19.10.2020 for examination of the case. However, no<br>comments have been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Case No.:4/9/81-ALC2/2020	Party Name: VIKARSH	Meet No/Date:9/81-	Status:
	STAMPINGS INDIA	ALC2/2020	Approved
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:3110067854
:01/81/050/00748/AM21/	:31/83/040/00066/AM21/	16.09.2020
HQ E-office Computer No.:

	Case No.:4/9/81-ALC2/2020	Party Name: VIKARSH<br>STAMPINGS INDIA<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00748/AM21/<br>HQ E-office Computer No.:	RLA File<br>:31/83/040/00066/AM21/	Lic.No/Date:3110067854<br>16.09.2020
97	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 27.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>72261100<br>CRGO Slit<br>Coil<br>500 MT<br>72251100 CRGO Electrical<br>Steel In Coils<br>1.015 Kg/Kg content in<br>the exportproduct<br>Note:<br>1. The applicant should import prime quality item of relevant grade only.<br>2. Width of imported coils should be more than the respective width of export items.<br>3. Thickness of both imported & exported items should be same.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:5/9/81-ALC2/2020 Party Name: VIKARSH Meet No/Date:9/81- Status: STAMPINGS INDIA ALC2/2020 Approved PRIVATE LIMITED 20.10.2020 HQ File RLA File Lic.No/Date:3110067855 :01/81/050/00749/AM21/ :31/83/040/00067/AM21/ 16.09.2020 98 HQ E-office Computer No.: 25167

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 27.10.2020 given by Consultant (SKB) as under:

ITCHS Export Item Quantity ITCHS Import Item Recommended

34 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Code				Code		Quantity
72261100	CRGO Slit	500	MT	72251100	CRGO Electrical	1.015 Kg/Kg content in
	Coils				Steel InCoils	the exportproduct

Note:

1. The applicant should import prime quality item of relevant grade only.

2. Width of imported coils should be more than the respective width of export items.

3. Thickness of both imported & exported items should be same.

99<br> <br> <br> <br> <br><br> <br> <br> <br>	Case No.:10/9/81-ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED<br>RLA File<br>:34/24/040/00348/AM20/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00754/AM21/<br>HQ E-office Computer No.:<br>25169		Lic.No/Date:3410046399<br>17.09.2020	<br>Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 22.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Case No.:6/9/81-	Party Name: KUMAR	Meet No/Date:9/81-	Status:
ALC2/2020	STEELS INC	ALC2/2020	Approved
		20.10.2020
HQ File	RLA File	Lic.No/Date:0510415239
:01/81/050/00750/AM21/	:05/23/040/00184/AM21/	17.09.2020
HQ E-office Computer
No.: 25170

	Case No.:6/9/81-<br>ALC2/2020<br>HQ File<br>:01/81/050/00750/AM21/<br>HQ E-office Computer<br>No.: 25170	Case No.:6/9/81-<br>ALC2/2020<br>HQ File<br>:01/81/050/00750/AM21/<br>HQ E-office Computer<br>No.: 25170	Party Name: KUMAR<br>STEELS INC	Party Name: KUMAR<br>STEELS INC	Party Name: KUMAR<br>STEELS INC	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
			RLA File<br>:05/23/040/00184/AM21/			Lic.No/Date:0510415239<br>17.09.2020
100	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>the basis of study group report dated 21.02.2020, as adopted by the Committee in the Meeting No.<br>24/81 dated 18.03.2020, as under:<br>ITCHS<br>Code<br>Export Item<br>Quantity<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>73239390<br>Table, Kitchen & Other<br>Household Articles<br>Made of Stainless Steel<br>With Relevant<br>Thickness Grade :201,<br>Having Net Content of<br>StainlessSteel<br>155455<br>Kgs<br>72199090<br>Non-Magnetic<br>Cold Rolled<br>Stainless Steel<br>Circles With<br>Relevant<br>Thickness<br>Grade:201<br>1.10 Kgs/Kg<br>content in the<br>export product<br>Note:<br>1. Grade of steel to match in import & export.<br>2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.<br>3. Export product should be of circular/oval shape only.<br>RA concerned maytake suitable consequential action accordingly.
		Export Item		Quantity	ITCHS<br>Code		Import Item	Recommended<br>Quantity
		Table, Kitchen & Other<br>Household Articles<br>Made of Stainless Steel<br>With Relevant<br>Thickness Grade :201,<br>Having Net Content of<br>StainlessSteel		155455<br>Kgs	72199090		Non-Magnetic<br>Cold Rolled<br>Stainless Steel<br>Circles With<br>Relevant<br>Thickness<br>Grade:201	1.10 Kgs/Kg<br>content in the<br>export product

35 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

101	Case No.:8/9/81-ALC2/2020	Party Name: HVR SOLAR<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00752/AM21/<br>HQ E-office Computer No.:<br>25179	RLA File<br>:05/23/040/00186/AM21/	Lic.No/Date:0510415263<br>18.09.2020	<br>Action by<br>:TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 15.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

102	Case No.:7/9/81-ALC2/2020	Party Name: POLYCAB<br>INDIA LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00751/AM21/<br>HQ E-office Computer No.:<br>25180	RLA File<br>:03/95/040/00368/AM21/	Lic.No/Date:0310838362<br>18.09.2020	<br>Action by<br>: DPIIT
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to DPIIT on 22.10.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Case No.:9/9/81-	Party Name: RAJHANS	Meet No/Date:9/81-	Status:
ALC2/2020	IMPEX PRIVATE	ALC2/2020	Approved
	LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:2410043247
:01/81/050/00753/AM21/	:24/24/040/00044/AM21/	18.09.2020
HQ E-office Computer
No.: 25181

	Case No.:9/9/81-<br>ALC2/2020	Party Name: RAJHANS<br>IMPEX PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00753/AM21/<br>HQ E-office Computer<br>No.: 25181	RLA File<br>:24/24/040/00044/AM21/	Lic.No/Date:2410043247<br>18.09.2020
103	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 15.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export<br>Item<br>Quantity ITCHS<br>Code<br>Import Item<br>Recommended Quantity<br>74032100<br>Brass<br>Billets<br>50 MT<br>74040022 Brass Scrap (<br>HoneyGrade)<br>1.06Kgs/Kg on net content of<br>brass in the exportproduct<br>Note:<br>1. Export item (Brass Billets) should contain- 58% Minimum, Lead: 3% Minimum &<br>Zinc: 37.30% Minimum.<br>2. Import item (Brass Scrap–Honey Grade as Per ISRI) should contain- Copper: 51-61%,<br>Lead: 2-3.5% & Zinc: 33-35.5 %.<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.

36 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

104	Case No.:12/9/81-<br>ALC2/2020	Party Name: JAIN METAL<br>ROLLING MILLS	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0410167086<br>21.09.2020	Status:<br>Deferred<br> <br>Action by<br>: MSME
	<br>HQ File<br>:01/81/050/00756/AM21/<br>HQ E-office Computer No.:<br>25182	RLA File<br>:04/24/040/00056/AM21/
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MSME for examination of the case on 12.10.2020. However, no comments have been<br>received yet. Therefore, the Committee decided to remind MSME for expediting the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MSME for examination of the case on 12.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind MSME for expediting the comments.

105	Case No.:11/9/81-<br>ALC2/2020	Party Name: SIEMENS<br>GAMESA RENEWABLE<br>POWER PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0410167082<br>21.09.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-3
	<br>HQ File<br>:01/81/050/00755/AM21/<br>HQ E-office Computer No.:<br>25184	RLA File<br>:04/24/040/00093/AM21/
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-1) on 22.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Case No.:13/9/81-	Party Name: DIAMOND	Meet No/Date:9/81-	Status:
ALC2/2020	ENGINEERING (CHENNAI)	ALC2/2020	Deferred
	PVT LTD	20.10.2020
HQ File	RLA File	Lic.No/Date:0410167094	Action by :
:01/81/050/00757/AM21/	:04/24/040/00099/AM21/	22.09.2020	Applicant
HQ E-office Computer
No.: 25224

106 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by DPIIT vide U. O. No.: P- 47011/119/2019-TSW dated 16.10.2020:

Sl. No. 1, 3, 4, 5 & 11 the Standard Deficiency Format.

107	Case No.:14/9/81-<br>ALC2/2020	Party Name: FCI OEN<br>CONNECTORS<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0710117048<br>22.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00758/AM21/<br>HQ E-office Computer No.:<br>25185	RLA File<br>:07/24/040/00173/AM21/		Action by :<br>Applicant

37 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 12.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

108	Case No.:15/9/81-<br>ALC2/2020	Party Name: SIEMENS<br>GAMESA RENEWABLE<br>POWER PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0410167096<br>23.09.2020	Status:<br>Deferred<br> <br>Action by :<br>Applicant
	<br>HQ File<br>:01/81/050/00759/AM21/<br>HQ E-office Computer<br>No.: 25186	RLA File<br>:04/24/040/00094/AM21/
	Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>12.10.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

Case No.:17/9/81-	Party Name: HINDUSTAN	Meet No/Date:9/81-	Status:
ALC2/2020	PLATINUM PVT. LTD.	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:0310838428	Action by :
:01/81/050/00761/AM21/	:03/94/040/00447/AM21/	24.09.2020	Applicant
HQ E-office Computer
No.: 25187

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 109 to furnish following information as per comments given by Consultant (SKB):

Detail process of manufacturing of export product and also its flow chart.
Exact composition of silver alloyed contacts and silver graphite powder with documentary evidence for material balancing.
Is there any indigenous input in the export product? If yes, please indicate the quantity to be used.
Will both ingredients of Silver Graphite Powder come separately or in combined form?

110	Case No.:18/9/81-<br>ALC2/2020	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED<br> <br> <br> <br> <br>RLA File<br>:03/95/040/00333/AM21/<br> <br>	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br> <br><br>Lic.No/Date:0310838436<br>24.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00762/AM21/<br>HQ E-office Computer No.:<br>25188
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/192/2019-TSW dated 19.10.2020. (copy<br>enclosed)

38 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

111	Case No.:19/9/81-<br>ALC2/2020	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved<br>
	<br>HQ File<br>:01/81/050/00763/AM21/<br>HQ E-office Computer No.:<br>25189	RLA File<br>:03/95/040/00302/AM21/	Lic.No/Date:0310838437<br>24.09.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/192/2019-TSW dated 19.10.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/192/2019-TSW dated 19.10.2020. (copy enclosed)

112	Case No.:20/9/81-<br>ALC2/2020	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved<br>
	<br>HQ File<br>:01/81/050/00764/AM21/<br>HQ E-office Computer No.:<br>25191	RLA File<br>:03/95/040/00222/AM21/	Lic.No/Date:0310838438<br>24.09.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/192/2019-TSW dated 19.10.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

113	Case No.:21/9/81-<br>ALC2/2020	Party Name: STEEL AIIDS<br>ENTERPRISE PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-3
	<br>HQ File<br>:01/81/050/00765/AM21/<br>HQ E-office Computer No.:<br>25193	RLA File<br>:03/95/040/00387/AM21/	Lic.No/Date:0310838455<br>24.09.2020
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 15.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

114	Case No.:16/9/81-<br>ALC2/2020	Party Name: SUNDER<br>IMPEX PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br> <br><br>Lic.No/Date:0510415301<br>24.09.2020<br> <br>	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00760/AM21/<br>HQ E-office Computer No.:<br>25194	RLA File<br>:05/24/040/00312/AM21/		Action by :<br>Applicant

39 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Sl. No. 3, 4, 5 & 11 the Standard Deficiency Format.

Case No.:22/9/81-	Party Name: HEALTHICO	Meet No/Date:9/81-	Status:
ALC2/2020	QUALITY PRODUCTS	ALC2/2020	Approved
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:5610005956
:01/81/050/00766/AM21/	:56/24/040/00026/AM21/	28.09.2020
HQ E-office Computer
No.: 25223

	Case No.:22/9/81-<br>ALC2/2020	Case No.:22/9/81-<br>ALC2/2020	Case No.:22/9/81-<br>ALC2/2020	Party Name: HEALTHICO<br>QUALITY PRODUCTS<br>PRIVATE LIMITED	Party Name: HEALTHICO<br>QUALITY PRODUCTS<br>PRIVATE LIMITED	Party Name: HEALTHICO<br>QUALITY PRODUCTS<br>PRIVATE LIMITED	Party Name: HEALTHICO<br>QUALITY PRODUCTS<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
	HQ File<br>:01/81/050/00766/AM21/<br>HQ E-office Computer<br>No.: 25223			RLA File<br>:56/24/040/00026/AM21/				Lic.No/Date:5610005956<br>28.09.2020
11<br>5	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 27.10.2020 given by Consultant (TEC-3) as under:
	ITCHS<br>Code	Export<br>Item	Quantity		Sl.<br>No.	ITCHS<br>Code	Import Item		Recommended<br>Quantity
	73231000	S. S.<br>Scrubber	192.060<br>MT		1	72230091	S.S. Wire 5.5<br>mm 410		1.03 Kg/Kg content<br>in the exportproduct
					2	72230092	S.S Wire 0.7<br>mm 410		1.01 Kg/Kg content<br>in the exportproduct
					3	72230099	S.S. Wire 0.18<br>mm 410		1.01 Kg/Kg content<br>in the exportproduct
					4	72230099	S.S. Wire 0.13<br>mm 410		1.01 Kg/Kg content<br>in the exportproduct
	Note:(i) Grade of all import items to be same in import & export.<br>(ii) Diameter of import items at 2 to 4 to be same in import & export.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:25/9/81-<br>ALC2/2020	Case No.:25/9/81-<br>ALC2/2020	Party Name: APL METALS<br>LIMITED	Party Name: APL METALS<br>LIMITED	Party Name: APL METALS<br>LIMITED	Party Name: APL METALS<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
HQ File<br>:01/81/050/00769/AM21/<br>HQ E-office Computer No.:<br>25196		<br>RLA File<br>:02/24/040/00082/AM21/				Lic.No/Date:0210210132<br>29.09.2020
Decision:The Committee considered the case as per agenda and decided to fix<br>per comments given by MSME via email dated 27.10.2020 as under:							the ad-hoc norms as
ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item		Recommended<br>Quantity
78011000	Refined Lead<br>Ingot Purity<br>99.97 %		3800<br>MT	85481010	Lead scrap covered by<br>ISRI code word<br>"Rails"		As applied<br>inclusive of<br>58.70% wastage<br>(taking cue from<br>SION C-1153)

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 11 per comments given by MSME via email dated 27.10.2020 as under: 6

40 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

117	Case No.:26/9/81-<br>ALC2/2020	Party Name: APL METALS<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00770/AM21/<br>HQ E-office Computer<br>No.: 25197	RLA File<br>:02/24/040/00083/AM21/	Lic.No/Date:0210210133<br>29.09.2020	Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and decided to seek from t<br>to furnish following information as per comments given by MSME:<br>1. Percentage of lead in import item supported by Certificate of Analysis.<br>The case stands deferred.			he applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

Case No.:23/9/81-	Party Name: BAOSTEEL	Meet No/Date:9/81-	Status:
ALC2/2020	INDIA COMPANY	ALC2/2020	Approved
	PRIVATE LIMITED	20.10.2020
HQ File	RLA File	Lic.No/Date:0310838548
:01/81/050/00767/AM21/	:03/94/040/00463/AM21/	29.09.2020
HQ E-office Computer
No.: 25198

	Case No.:23/9/81-<br>ALC2/2020	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00767/AM21/<br>HQ E-office Computer<br>No.: 25198	RLA File<br>:03/94/040/00463/AM21/	Lic.No/Date:0310838548<br>29.09.2020
118	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 27.10.2020 given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export Item<br>QuantityITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>72122090<br>Prime Electro<br>Galvanized Steel<br>Sheet, Grade<br>Seccn5, Thickness<br>0.5 mm, Width 585<br>mm, Length 1000<br>mm<br>990 MT<br>72103090<br>Prime Electro<br>galvanized Steel<br>Sheet In Coils,<br>Grade Seccn5,<br>Thickness 0.5 mm,<br>Width 1173 mm,<br>Length C mm<br>1.01 Kg/Kg<br>content in the<br>export product<br>Note: The applicant should import relevant grade item only.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:24/9/81-<br>ALC2/2020	Case No.:24/9/81-<br>ALC2/2020	Case No.:24/9/81-<br>ALC2/2020	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
HQ File<br>:01/81/050/00768/AM21/<br>HQ E-office Computer<br>No.: 25204			RLA File<br>:03/94/040/00464/AM21/			Lic.No/Date:0310838549<br>29.09.2020
Decision:The Committee considered the case as per agenda and decided to fix the<br>per written comments dated 27.10.2020 given by Consultant (SKB) as under:								ad-hoc norms as
Sl.	ITCHS	Export Item		Quantity	ITCHS		Import Item	Recommended

41 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

No.	Code			Code		Quantity
1	72123090	Hot Dip Galvanized of<br>Hot Rolled Steel in<br>Coil, Grade SGHC,<br>Thickness 1.5 mm,<br>Width 214 mm, Length<br>C mm	495 MT	72104900	Hot Dip<br>Galvanized of<br>Hot Rolled<br>Steel in Coil,<br>Grade SGHC,<br>Thickness 1.5<br>mm, Width<br>1219 mm,<br>Length C mm	1.01 Kg/Kg on<br>net content in<br>the export<br>product
2	72123090	Hot Dip Galvanized of<br>Hot Rolled Steel In<br>Coil, Grade SGHC,<br>Thickness 1.5 mm,<br>Width 288 mm, Length<br>Cmm	495 MT
Note: The applicant should import relevant grade item only.<br>RA concerned maytake suitable consequential action accordingly.

120	Case No.:29/9/81-<br>ALC2/2020	Party Name: EFD<br>INDUCTION PRIVATE<br>LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00773/AM21/<br>HQ E-office Computer No.:<br>25205	RLA File<br>:07/24/040/00179/AM21/	Lic.No/Date:0710117076<br>29.09.2020	<br>Action by<br>: MeitY
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MeitY on 14.10.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Case No.:31/9/81-<br>ALC2/2020	Case No.:31/9/81-<br>ALC2/2020	Case No.:31/9/81-<br>ALC2/2020	Party Name: MITTAL<br>COIN PRIVATE LIMITED	Party Name: MITTAL<br>COIN PRIVATE LIMITED	Party Name: MITTAL<br>COIN PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020
HQ File<br>:01/81/050/00775/AM21/<br>HQ E-office Computer<br>No.: 25206			RLA File<br>:56/24/040/00024/AM21/			Lic.No/Date:5610005957<br>29.09.2020
Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments dated 27.10.2020 given by Consultant (SKB) and the recommendations of the<br>Technical members as under:
ITCHS<br>Code	Export<br>Item	Quantity		ITCHS<br>Code	Import Item		Recommended<br>Quantity
74031300	Refined<br>Copper<br>Billets	500 MT		74040012	Copper Scrap Birch Cliff,<br>Berry, Candy, Cobra,<br>Clove,Cocoa Barley		1.03Kgs/Kg on net<br>content of copper in<br>the exportproduct
Note:<br>1. Export item should contain minimum 99.00% Copper.<br>2. Import item should contain average 97.00% Copper.<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 27.10.2020 given by Consultant (SKB) and the recommendations of the 12 Technical members as under: 1

Note:

1. Export item should contain minimum 99.00% Copper.

2. Import item should contain average 97.00% Copper.

42 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Case No.:32/9/81-	Party Name: MITTAL COIN	Meet No/Date:9/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		20.10.2020
HQ File	RLA File	Lic.No/Date:5610005958	Action by :
:01/81/050/00776/AM21/	:56/24/040/00025/AM21/	29.09.2020	Applicant
HQ E-office Computer
No.: 25207

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (SKB):

122 1. What is the composition and percentage of copper in Copper tape to be exported?
1. What is the percentage of copper in Copper scrap to be imported under the above Advance licenses?
2. Please indicate actual size (Thickness, Width and length) of each Copper tape.
3. What are the length, width and thickness of slab? What is need of milling operation before rolling? After rolling what will the length, width of the sheet/coil?
4. How many slit copper tape of required width will be obtained after finishing operation?
5. What is the weight of each copper tape and total quantity in numbers to be exported under 100 MT weight?

123	Case No.:27/9/81-<br>ALC2/2020	Party Name: SIEMENS<br>GAMESA RENEWABLE<br>POWER PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00771/AM21/<br>HQ E-office Computer<br>No.: 25210	RLA File<br>:04/24/040/00105/AM21/	Lic.No/Date:0410167120<br>29.09.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>12.10.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

124	Case No.:28/9/81-<br>ALC2/2020	Party Name: SIEMENS<br>GAMESA RENEWABLE<br>POWER PRIVATE LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00772/AM21/<br>HQ E-office Computer<br>No.: 25211	RLA File<br>:04/24/040/00104/AM21/	Lic.No/Date:0410167121<br>29.09.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>12.10.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

43 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

125	Case No.:33/9/81-<br>ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00777/AM21/<br>HQ E-office Computer No.:<br>25213	RLA File<br>:03/94/040/00377/AM21/	Lic.No/Date:0310838596<br>30.09.2020	<br>Action by<br>: TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 13.10.2020 for examination of the case. However, no comments have<br>been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting<br>the comments.<br>The case stands deferred.

126	Case No.:36/9/81-<br>ALC2/2020	Party Name: ENERGICOMM<br>WIRES LIMITED<br>RLA File<br>:09/24/040/00269/AM21/	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020<br>Lic.No/Date:0910069284<br>30.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00780/AM21/<br>HQ E-office Computer<br>No.: 25214			Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>12.10.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

127	Case No.:30/9/81-<br>ALC2/2020	Party Name: MARIGOLD<br>IMPEX	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00774/AM21/<br>HQ E-office Computer No.:<br>25215	RLA File<br>:03/95/040/00394/AM21/	Lic.No/Date:0310838563<br>30.09.2020	<br>Action by<br>: TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 16.10.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

128	Case No.:35/9/81-<br>ALC2/2020	Party Name: ABB POWER<br>PRODUCTS AND<br>SYSTEMS INDIA LIMITED	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00779/AM21/<br>HQ E-office Computer No.:<br>25216	RLA File<br>:05/23/040/00191/AM21/	Lic.No/Date:0510415386<br>01.10.2020	<br>Action by<br>: TEC-3

44 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 13.10.2020 & 14.10.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

129	Case No.:34/9/81-<br>ALC2/2020	Party Name: MAK<br>CONTROLS AND<br>SYSTEMS PVT. LTD.	Meet No/Date:9/81-<br>ALC2/2020<br>20.10.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00778/AM21/<br>HQ E-office Computer No.:<br>25219	RLA File<br>:32/24/040/00056/AM21/	Lic.No/Date:3210079734<br>01.10.2020	<br>Action by<br>: TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 13.10.2020 for examination of the case. However, no comments have<br>been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting<br>the comments.<br>The case stands deferred.

Minutes of the Offline Cases

SI.<br>No.	<br>Applicant's<br>Name / AA<br>No.	HQ/RA File<br>No.	Case History	Decision	Status
R1	TRAFOMEC<br>INDIA<br>MAGNETICS<br>PRIVATE<br>LIMITED	<br>01/81/050/00<br>325/AM12/<br>07/24/040/00<br>258/AM12/	The case was rejected in M. No. 9/81-<br>ALC2/2013 dated 16.07.2013 due to non-<br>submission of reply to deficiency letter dated<br>01.02.2013.<br>The<br>applicant's<br>reply<br>dated<br>30.06.2015 alongwith their earlier replydated	<br> <br> <br>The Committee decided to<br>remind the applicant for<br>furnishing<br>the<br>requisite<br>information.	<br> <br> <br>Deferred

45 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

	0710083779<br>dated<br>08.11.2011		17.09.2012<br>were<br>forwarded<br>to<br>DHI<br>on<br>19.02.2016. The case was considered in offline<br>Agenda in M. No. 23/81 & 25/81 dated<br>23.02.2016 & 07.03.2017 respectively. The case<br>was again rejected in M. No. 08/81 dated<br>11.07.2017 due to non-submission of reply to<br>deficiency<br>letter<br>dated<br>19.04.2017.<br>The<br>applicants vide letter dated 01.05.2019 furnished<br>reply and requested to ratify the ad-hoc norms.<br>The case was considered in M. No. 12/81 dt.<br>18.09.2019 and decided to refer the case to DHI.<br>As per decision, the case was referred to DHI on<br>25.10.2019. As per decision in M. No.<br>18/81dated<br>11.12.2019,<br>the<br>applicant’s<br>representation/application was again referred to<br>DHI on 20.01.2020. As per the decision of M.<br>No. 24/81dated 18.03.2020, the complete set of<br>application forward to DHI via email dated<br>06.08.2020. The case was last considered in M.<br>No. 06/81 dt. 25.08.2020 and decided to remind<br>DHI for expediting the comments. DHI D/L<br>received via email on 21.09.2020 and sent to the<br>applicant on 07.10.2020. However, no reply has<br>been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R2	BHARAT<br>HEAVY<br>ELECTRICA<br>LS LIMITED<br>1110028319<br>dated<br>12.01.2018	01/81/050/00<br>096/AM19/<br>11/24/040/00<br>006/AM18/<br>(E-22943)	The case was ratified in M. No. 05/81-<br>ALC2/2018 dated 10.10.2018 as per written<br>comments of DHI vide U. O. No. DES-<br>2/BHEL/GTr/2018-TW-HEI. The applicant vide<br>their email dated 26.11.2018 requested for<br>revision of ratified norms. The case was<br>considered in M. No. 12/81 dated 18.09.2019,<br>15/81 dated 30.10.2019 and 18/81 dated<br>11.12.2019 and decided to send the applicant’s<br>representation/application to DHI immediately.<br>As per the decision of M. No. 24/81dated<br>18.03.2020, the complete set of application<br>forward to DHI via email dated 07.08.2020. The<br>case was last considered in M. No. 06/81 dt.<br>25.08.2020 and decided to remind DHI for<br>expediting the comments. The representation was<br>again forwarded to DHI on 26.10.2020.<br>However,no comments have been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred
R3	BHARAT<br>HEAVY<br>ELECTRICA<br>LS LIMITED<br>1110018794<br>dated<br>27.10.2008	01/81/050/00<br>492/AM09/<br>11/24/040/00<br>024/AM09/<br>(E-24437)	The case was ratified in M. No. 18/81 dated<br>04.08.2009 as per written comments of DHI vide<br>U.<br>O.<br>No.<br>3(7)/2009/TSW(B)/334<br>dated<br>19.08.2009.<br>The applicant vide letter dated 09.07.2018 had<br>requested for revision of norms on actual<br>import/utilization for import items at Sl. No. 3, 4,<br>9, 17, 20, 21, 24, 43 and 55 with justification.<br>The case was last considered in M. No. 12/81 dt.<br>18.09.2019 and 15/81 dt. 30.10.2019 and decided<br>to call the applicant on personal hearing to<br>explain the case. Asper NC decision email dated	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted the comments given by<br>DHI<br>vide<br>email<br>dated<br>23.09.2020 wherein it is<br>stated that the applicant has<br>represented that after nine<br>years<br>vide<br>letter<br>dated<br>09.07.2018.<br>Further,<br>the<br>applicant has requested for<br>ratification under SION for<br>item No. 1 to 3 and it is	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected

46 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

			28.11.2019 sent to the applicant requesting to<br>attend PH on 11.12.2019. The Committee<br>considered the case in M. No. 18/81 dated<br>11.12.2019<br>and<br>heard<br>the<br>applicant’s<br>representative during personal hearing. The<br>Committee decided to refer the matter to DHI for<br>further examination of the case. As per the<br>decision of M. No. 24/81dated 18.03.2020, the<br>complete set of application forward to DHI via<br>email dated 07.08.2020. The case was last<br>considered in M. No. 06/81 dt. 25.08.2020 and<br>decided to remind DHI for expediting the<br>comments.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>observed<br>that<br>export<br>description & import item are<br>not same as that of SION. So,<br>the same may not be agreed.<br>For item No. 4, the applicant<br>has requested for repeat basis<br>but specification of export<br>item is not same for both and<br>also<br>KV<br>rating<br>is<br>not<br>mentioned in the subjected<br>AA. Therefore, on the basis<br>of comments of DHI, the<br>Committee decided toreject<br>the case under intimation to<br>RA, Bhopal.<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R4	Tubex India<br>0510400849<br>dated<br>19.12.2016	01/81/050/00<br>544/AM17/<br>05/24/040/00<br>459/AM17/<br>(E-24503)	The case was rejected in M. No. 8/81-<br>ALC2/2017 dated 11.07.2017 due to non-<br>submission of reply of deficiency letter dated<br>14.02.2017 as raised by DIPP vide U. O. No.<br>12/5/2017-TSW/103 dated 24 /01/2017. This<br>case was considered in M. No. 12/81 dt.<br>18.09.2019 and the Committee noted that the<br>applicant had not furnished the reply of<br>deficiency letter dated 14.02.2017. As per NC<br>decision, an email was sent to the applicant on<br>22.10.2019 along with a copy of D/L dt.<br>14.02.2017<br>followed<br>by<br>a<br>reminder<br>on<br>03.12.2019. As per NC decision of M. No.<br>21/81dated 22.01.2020, the case was referred to<br>Consultant (TEC-3) on 17.03.2020. In M. No.<br>24/81 dt. 18.03.2020 and decided to wait for<br>comments. The case was last considered in M.<br>No. 06/81 dt. 25.08.2020 and a deficiency letter<br>seeking following information as raised by<br>Consultant (TEC-3) was sent to the applicant on<br>18.08.2020:<br>1. Documents for sale of scrap indicating price.<br>2. Documents for CIF value imported inputs /<br>items.<br>Hence, the Committee decided to wait for reply<br>of the applicant. The applicant's reply via email<br>dt. 25.08.2020 was sent to Consultant (TEC-3)<br>on 25.08. 2020 followed by a reminder on<br>08.10.2020.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda.<br>Consultant (TEC-3) informed<br>that the applicant vide email<br>dated 25.08.2020 had given<br>details of sale of scrap which<br>is Rs. 22/Kg against CIF<br>value of Rs. 6300-200/Kg.<br>Accordingly recovery due to<br>sale of scrap is negligible.<br>Therefore,<br>the<br>Committee<br>decided torevisethe ad-hoc<br>norms onrepeat basis as<br>approved<br>for<br>AA<br>No.<br>0510399600<br>dated<br>01.09.2016in Meeting No.<br>22/81 dated 19.02.2020 on<br>the<br>recommendation<br>of<br>Consultant (TEC-3) as under:	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
	1. Quantity of import item (Alloy 188 (AMS 5772D) - 2.006/2.0136" Dia" Long”at Sl. No. 1 may be allowed as<br>206Kgs inclusive of 555% wastage.<br>2. Quantity of import item (Alloy 188 (AMS 5772D) - 2.255/2.265" Dia”at Sl. No. 2 may be allowed as105Kgs with<br>355% wastage.<br>3. Quantityof import item(Alloy 188(AMS 5772D) - 3.015/3.052" Dia" long”at Sl. No. 3 maybe allowed as40Kgs

Quantity of import item ( Alloy 188 (AMS 5772D) - 2.006/2.0136" Dia " Long” at Sl. No. 1 may be allowed as 206Kgs inclusive of 555% wastage . 2. Quantity of import item ( Alloy 188 (AMS 5772D) - 2.255/2.265" Dia ” at Sl. No. 2 may be allowed as 105Kgs with 355% wastage .
Quantity of import item ( Alloy 188 (AMS 5772D) - 3.015/3.052" Dia " long” at Sl. No. 3 may be allowed as 40Kgs 47 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

inclusive of 705% wastage & 60Kgs inclusive of 620% corresponding to export items at Sl. No. 4 & 5 respectively.

Quantity of import item ( Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick ” at Sl. No. 4 may be allowed as 158 Kgs inclusive of 150% wastage.

Note: Grade of import items will match with those used in export items.

	inclusive of 705% wastage&60Kgs inclusive of 620%corresponding to export items at Sl. No. 4 & 5 respectively.<br>4. Quantity of import item (Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick”at Sl. No. 4 may be allowed as<br>158 Kgs inclusive of 150% wastage.<br>Note: Grade of import items will match with those used in export items.<br>RA concerned maytake suitable consequential action accordingly.	inclusive of 705% wastage&60Kgs inclusive of 620%corresponding to export items at Sl. No. 4 & 5 respectively.<br>4. Quantity of import item (Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick”at Sl. No. 4 may be allowed as<br>158 Kgs inclusive of 150% wastage.<br>Note: Grade of import items will match with those used in export items.<br>RA concerned maytake suitable consequential action accordingly.	inclusive of 705% wastage&60Kgs inclusive of 620%corresponding to export items at Sl. No. 4 & 5 respectively.<br>4. Quantity of import item (Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick”at Sl. No. 4 may be allowed as<br>158 Kgs inclusive of 150% wastage.<br>Note: Grade of import items will match with those used in export items.<br>RA concerned maytake suitable consequential action accordingly.	inclusive of 705% wastage&60Kgs inclusive of 620%corresponding to export items at Sl. No. 4 & 5 respectively.<br>4. Quantity of import item (Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick”at Sl. No. 4 may be allowed as<br>158 Kgs inclusive of 150% wastage.<br>Note: Grade of import items will match with those used in export items.<br>RA concerned maytake suitable consequential action accordingly.	inclusive of 705% wastage&60Kgs inclusive of 620%corresponding to export items at Sl. No. 4 & 5 respectively.<br>4. Quantity of import item (Alloy Steel- Hast X (AMS 5536N) - 1.510/1.635" Thick”at Sl. No. 4 may be allowed as<br>158 Kgs inclusive of 150% wastage.<br>Note: Grade of import items will match with those used in export items.<br>RA concerned maytake suitable consequential action accordingly.
R5	STERLITE<br>POWER<br>TRANSMISSI<br>ON LIMITED<br>0310819587<br>Dated<br>07.03.2018	<br>01/81/050/00<br>030/AM19/<br>03/95/040/00<br>921/AM18/<br>(E-24446)	The case was rejected in M. No. 11/81-<br>ALC2/2018 dated 30.01.2019 due to non-<br>submission<br>of<br>reply<br>to<br>deficiency<br>letter<br>dated18.10.2018. The applicant vide letter<br>received on 17.01.2019 had furnished the reply<br>& requested for ratification of ad-hoc norms. As<br>per decision of M. No. 12/81 dt. 18.09.2019, the<br>case was referred to DPIIT on 28.10.2019. The<br>case was considered in M. No. 18/81dated<br>11.12.2019 and decided to send the applicant’s<br>representation/application to DPIIT. As per NC<br>decision, the case was referred to DPIIT on<br>20.01.2020. The case was considered in M. No.<br>21/81dated 22.01.2020 and decided to wait for<br>comments. The case was last considered in M.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per the agenda<br>and decided to fix the norms<br>as per written comments<br>given byDPIITvide U. O.<br>No.: P-47011/192/2019-TSW<br>dated 02.09.2020 as under:<br>1. Net weight of export<br>items may be specifiedas<br>336.66 MT.<br>2. Taking clue from SION<br>C-7, quantity of import<br>item at Sl. No. 1 i.e.<br>Aluminium wire rod may<br>be allowedas 312.24<br>MT<br>@1.01Kgs/Kg<br>content in the export<br>item.<br>3. Quantity of import item<br>at Sl. No. 2 i.e. ACCC<br>Composite Core 7.11mm<br>may<br>be<br>allowed<br>as<br>365.62KMsinclusive of<br>1% wastage.<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
			No. 24/81 dt. 18.03.2020 and decided to remind<br>DPIIT for expediting the comments. As per<br>decision of M. No. 24/81 dt. 18.03.2020 the<br>reminder was issued to DPIIT on 05.08.2020.<br>Again, the complete set of application along with<br>applicant’s reply forwarded to DPIIT via email<br>dated 18.08.2020. The case was last considered<br>in M. No. 06/81 dt. 25.08.2020 and decided to<br>wait for the comments. Reminder issued to<br>DPIIT on 08.10.2020.
R6	Bilcare<br>Limited<br>3110066383<br>dated<br>25.10.2016	01/81/050/00<br>442/AM17/<br>31/83/040/00<br>099/AM17/<br>(E-24505)	The case was ratified in M. No. 03/81 dated<br>14.08.2018 as per written comments of DIPP as<br>approved for AA No. 3110066596 dated<br>17.02.2017 ratified in M. No. 19/81 dated<br>05.12.2017. The applicant vide letter dated<br>31.10.2018 has requested for revision of ratified<br>norms. The case was considered in M. No. 12/81<br>dt. 18.09.2019 and decided to seek from the<br>applicant to furnish following information as per<br>advice of Consultant (TEC-1): (1.) Percentage<br>net content of import item no. 1 to 3 in export<br>product. (2.) Percentage net content of import<br>item no. 4 & 5 on solid content basis. As per NC<br>decision, D/L was issued on 14.10.2019. The<br>applicant's reply was sent to Consultant (TEC-1)<br>on 31.01.2020 as decided in M. No. 21/81 dated<br>22.01.2020. The case was last considered in<br>meetingno. 24/81 dt. 18.03.2020 and decided to	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>heard the representatives of<br>the applicant during personal<br>hearing held through video<br>conferencing.<br>The<br>representatives explained the<br>case<br>in<br>details<br>and<br>the<br>Committee<br>directed<br>the<br>representatives<br>to<br>furnish<br>following information as per<br>the advice of Consultant<br>(TEC-1):<br>1. Material<br>balance<br>between<br>import<br>&<br>export<br>in<br>terms<br>of<br>percentage<br>solid	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred

48 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

call the applicant on personal hearing to explain content for item No. 4 the case. As per NC decision, an email dated & 5 of import. Since, as 24.08.2020 was sent to the applicant requesting per application these to attend PH on 25.08.2020. The case was last parameters are different considered in meeting no. 06/81 dt. 25.08.2020, in subsequent reply. the Committee noted that the firm was called for personal hearing via video conferencing. The case stands deferred. However, the applicant via email dated 24.08.2020 requested to grant personal hearing after one month. Therefore, the Committee decided to call the applicant to attend personal hearing in the forthcoming NC meeting. As per NC decision email dated 13.10.2020 was sent to the applicant to attend PH via video conferencing on 20.10.2020. Also, the physical file was sent to Consultant (TEC-1) on 23.10.2020. The case was ratified in M. No. 05/81 dated The Committee decided to Deferred 12.06.2019 on repeat basis as approved for AA remind the applicant for No.0710111799 dated 21.06.2017 in M. No. furnishing the requisite 3/81-ALC2/2019 dated 15.05.2019 as information. recommended by Consultant (TEC-3). The applicant vide letter dated 15.07.2019 has requested for revision of ratified norms. This case was considered in M. No. 12/81 dt. 18.09.2019 and decided to ask the applicant to furnish copies of shipping bills. As per NC decision, D/L was issued on 14.10.2019 along with reminder on 03.12.2019. As per NC decision of M. No. 21/81 dated 22.01.2020, the applicant's reply was referred to Consultant (TEC-3) on 31.01.2020. The case was considered 01/81/050/00 in meeting no. 24/81 dt. 18.03.2020 and Armor Plast 655/AM19/ Consultant (TEC-3) informed that the applicant Limited had submitted copy of many shipping bills and in 07/24/040/00 some of shipping bills word “Cannula” is 0710113842 156/AM19/ mentioned and in few bills word “Cutter” is dated mentioned. Therefore, the Committee decided to 12.09.2018 (E-24508) ask the applicant to explain why he is making export of ‘Cutter’ under the authorization and why such exports should not be disallowed. As per decision of M. No. 24/81 dated 18.03.2020, D/L as raised by Consultant (TEC-3) was sent to the applicant on 18.05.2020 followed by reminder on 10.08.2020. The applicant’s reply dt. 11.08.2020 was sent to Consultant (TEC-3) on 13.08.2020. The case was last considered in M. No. 06/81 dt. 25.08.2020 and Consultant (TEC-3) informed that the applicant in its reply dated 11.08.2020 has given only photograph of the cutter instead of drawing of cutter. Therefore, the Committee decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-3): Detailed drawing of cutter. As per NC decision, D/L was sent to

49 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

the applicant on 07/08.10.2020. However, no reply has been received yet. The case was approved in M. No. 5/81The Committee decided to Deferred ALC2/2019 dated 12.06.2019 on repeat basis as remind the applicant for approved for AA No. 0710111799 dated furnishing the requisite 21.06.2017 in M. No. 3/81-ALC2/2019 dated information. 15.05.2019 on the recommendation of Consultant (TEC-3). The applicant vide letter dated 15.07.2019 stated that they had already completed the export obligation against the AA and there is no provision to amend the export shipping bills from the customs. Therefore, they had requested to remove the word "Tubes" from the export item. The case was considered in M. No. 12/81 dt. 18.09.2019 and decided to ask the applicant to furnish copies of shipping bills. As per NC decision, D/L was sent on 14.10.2019 along with reminder on 03.12.2019. As per NC decision of M. No. 21/81 dated 22.01.2020, the applicant's reply was referred to Consultant 01/81/050/00 (TEC-3) on 31.01.2020. The case was considered Armor Plast 448/AM19/ in meeting no. 24/81 dt. 18.03.2020 and Ltd Consultant (TEC-3) informed that the applicant R8 07/24/040/00 had submitted copy of many shipping bills and in 0710113649 110/AM19/ some of shipping bills word “Cannula” is Dated mentioned and in few bills word “Cutter” is 27.07.2018 (E-24509) mentioned. Therefore, the Committee decided to ask the applicant to explain why he is making export of ‘Cutter’ under the authorization and why such exports should not be disallowed. As per decision of M. No. 24/81 dated 18.03.2020, D/L as raised by Consultant (TEC-3) was sent to the applicant on 18.05.2020 followed by reminder on 10.08.2020. The applicant’s reply dt. 11.08.2020 was sent to Consultant (TEC-3) on 13.08.2020. The case was last considered in M. No. 06/81 dt. 25.08.2020 and Consultant (TEC-3) informed that the applicant in its reply dated 11.08.2020 has given only photograph of the cutter instead of drawing of cutter. Therefore, the Committee decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-3): Detailed drawing of cutter. As per NC decision, D/L was sent to the applicant on 07/08.10.2020. However, no reply has been received yet. 01/81/050/00 The case was ratified in M. No. 4/81 dated The Committee decided to Deferred Armor Plast 884/AM19/ 29.05.2019 as recommended by Consultant remind the applicant for Ltd (TEC-3). The applicant vide letter dated furnishing the requisite R9 07/24/040/00 15.06.2019 stated that they had already information. 0710112339 217/AM18/ completed the export obligation against the AA dated and there is no provision to amend the export 01.11.2017 (E-24510) shipping bills from the customs. Therefore, they had requested to remove the word "Tubes" from

50 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

the export item. This case was considered in M. No. 12/81 dt. 18.09.2019 and decided to ask the applicant to furnish copies of shipping bills. As per NC decision, D/L was sent on 14.10.2019 along with reminder on 03.12.2019. The case was considered in M. No. 21/81 dated 22.01.2020, the applicant's reply was referred to Consultant (TEC-3) on 31.01.2020. The case was considered in meeting no. 24/81 dt. 18.03.2020 and Consultant (TEC-3) informed that the applicant had submitted copy of many shipping bills and in some of shipping bills word “Cannula” is mentioned and in few bills word “Cutter” is mentioned. Therefore, the Committee decided to ask the applicant to explain why he is making export of ‘Cutter’ under the authorization and why such exports should not be disallowed. As per decision of M. No. 24/81 dated 18.03.2020, D/L as raised by Consultant (TEC-3) was sent to the applicant on 18.05.2020 followed by reminder on 10.08.2020. The applicant’s reply dt. 11.08.2020 was sent to Consultant (TEC-3) on 13.08.2020. The case was last considered in M. No. 06/81 dt. 25.08.2020 and Consultant (TEC-3) informed that the applicant in its reply dated 11.08.2020 has given only photograph of the cutter instead of drawing of cutter. Therefore, the Committee decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-3): Detailed drawing of cutter. As per NC decision, D/L was sent to the applicant on 07/08.10.2020. However, no reply has been received yet. The case was ratified in M. No. 3/81-ALC2/2018 The Committee decided to Deferred dated 14.08.2018 by allowing wastage of 5%. remind the applicant for The applicant via email dated 21.11.2018 furnishing the requisite requested for revision of ratified norms. The case information. was considered in M. No. 12/81 dt. 18.09.2019 and decided to refer the case to DPIIT for examination. As per decision of meeting no. M. 01/81/050/00 No. 21/81dated 22.01.2020, the representation Pilot 199/AM18/ was forwarded to DPIIT via email dated Industries Ltd. 16.03.2020. In meeting no. 24/81 dt. 18.03.2020 R10 05/24/040/00 and decided to wait for comments. A reminder 0510402645 073/AM18/ was issued to DPIIT on 23.04.2020 & dated 05.08.2020. As per DPIIT recommendation dated 19.05.2017 (E-24514) 11.08.2020, the case was referred to MSME via email dated 13.08.2020. The case was last considered in M. No. 06/81 dt. 25.08.2020 and decided to seek from the applicant to furnish following information as per comments given by MSME via email dated 25.08.2020: 1. Certificate of analysis. 2. Manufacturing process with stepwise wastage. As per NC decision, D/L was sent

51 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||to the appl<br>replyhas be||icant on 07.10.2020. Howeve<br>en receivedyet.|r, no|||||
|R11|<br>Vindhya<br>Telelinks Ltd.<br>1110025730<br>dated<br>19.09.2011||||The case w||s ratified in M No 3/81-ALC2|/2018<br>e OM<br>The|<br>The Committee c|onsidered|<br>**W**||
||||||<br>dated 14.08.<br>No.<br>15-02||. .<br>2018 as per DoT comments vid<br>/207-IP<br>dated<br>14.05.2018.||<br> <br> <br> <br>the case as per ag<br>noted that the appli|<br>enda and<br>cant vide|<br> <br> <br>||
||||||applicant vide letters dated 22.10.2018 and<br>09.11.2018 requested for revision of ratified<br>norms. The case was considered in M. No. 12/81<br>dt. 18.09.2019 and decided to refer the case to<br>DoT for examination. As per the decision of M.<br>No. 18/81dated 11.12.2019, the applicant’s<br> <br> <br> <br>||||<br> <br> <br> <br> <br> <br> <br>email<br>dated<br>08.10.2020<br>informed that they have paid<br>duty amount on the imports<br>made under the said advance<br>license on the  basis of<br>previously<br>fixed<br>norms.<br> <br> <br>||<br> <br> <br> <br> <br> <br> <br>||
|||||01/81/050/00|representation/application<br>sent<br>to<br>DoT<br>on<br>21112019 l ith id  17032020||||<br> <br>Therefore,<br>the<br>Committee<br>didd t**ithd**th||||
|||ns<br>0257<br>ated<br>9.20|.<br>30<br>|558/AM18/<br>11/24/040/00<br>|..<br>for expedit||aong w remner on .<br>ing the comments. The case|.|<br> <br> <br> <br>ece o**wra**<br>from<br>the<br>agend<br>intimation to RA, B|e case<br>a<br>under<br>hopal.|<br>||
|||||||||<br>was|||||
||||||considered i||n M. No. 24/81 dt. 18.03.202|0 and<br>sh the<br>s per|||||
||||||decided to s||eek from the applicant to furni||||||
||||11|027/AM12/|<br>detailed cal<br>advice of th||<br>culations of wastage claimed a<br>e representative of DoT.  As p||<br> <br> <br>The case is withdra|wn.|||
|||||||||<br>er NC|||||
||||||decision, D/L was sent to applicant on||||<br> <br> <br> <br> <br>||||
||||||18.05.2020 followed by reminder on 10.08.2020.||||||||
||||||However, no reply has been received yet. The||||||||
||||||case was last considered in M. No. 06/81 dt.||||||||
||||||25.08.2020 and decided to remind again the<br>alicant for furnishin the reuisite information||||||||
||||||pp  g  q .<br>As per NC decision, reminder was sent to the||||<br>||||
||||||<br>applicant on||<br>08.10.2020.||||||
|R12|<br>Anglo Steel<br>Pvt. Limited<br>0310796525<br>dated<br>09.06.2015|lo St|||The case w<br>special me||as approved in Norms Commit<br>eting held on 11.12.2017.|tee-II<br>The<br>ested<br>ad of<br>|<br> <br>The Committee c<br>the case as per ag|onsidered<br>enda and|<br> <br>**Re**||
||||||applicant vi<br>to correct t<br>||a email dated 04.05.2019 requ<br>he AA No. 0310796525 inste<br>||<br> <br> <br>noted that the appli<br>email<br>dated<br>1<br>|cant vide<br>0.10.2020<br>|<br> <br>||
||||eel|01/81/050/00<br>185/AM16/|0310798525. The case was considered in M. No.<br>12/81 dt. 18.09.2019 and decided to refer the<br>case to Consultant (TEC-3). In M. No. 24/81<br>dated 18.03.2020, the Committee noted that the<br>complete set of representation/ documents was<br>not referred to Consultant (TEC-3) as decided in<br>M. No. 21/81dated 22.01.2020. Therefore the||||<br> <br> <br> <br> <br> <br> <br>requested to close the matter<br>as they are withdrawing their<br>request of amendment in<br>licence number. Therefore,<br>the**Committee decided to**<br>**reject the request of the**<br>**applicant with the condition**||<br> <br> <br> <br> <br> <br>||
||||||,<br>Committee directed to forward all the relevant||||<br> <br> <br>**that the case will not be**||||
|||7965<br>ated<br>6.20|25<br> <br>|03/94/040/00<br>165/AM16/<br>|docume<br>Scanned<br>along w<br>|nts to Consultant (TEC-3) immedi<br>copies of complete set of applic<br>ith all concerned/ related docu<br>o queries raised etc.) in chronol<br>as sought from the applicant vide<br>082020 The case was last consi||ately.<br>ations<br>ments<br>|<br> <br> <br> <br> <br> <br>**reopened in fut**<br>**concerned RA to**<br>**action for closer of**<br>RA concerned m<br>suitable conseuent|**ure and**<br>**finalize**<br>**the case.**|<br>||
||||15|**(E-24521)**|(reply t<br>order w<br>dated 1|||ogical<br>email<br>dered||ay take<br>ial action|<br>||
||||||...<br>in M. No. 06/81 dt. 25.08.2020, the Committee<br>noted that the applicant via email dated<br>11.08.2020 requested for some more time to<br>submit the complete application and along with<br>relevant documents. Therefore, the Committee<br>decided to wait for reply of the applicant. Final<br>reminder<br>was<br>sent<br>to<br>the<br>applicant<br>on||||<br> <br> <br> <br> <br> <br> <br> <br>q<br>accordingly.||||
||||||08.10.2020.||||||||
|R13|Anglo Steel<br>Pvt. Limited|||01/81/050/00<br>184/AM16/|The case was approved in Norms Committee-II<br>Special Meetingheld on 11.12.2017. The||||<br> <br>The Committee considered<br>the case asper agenda and||<br> <br>**Rejected**||
|||**52 |**P a g e  6 4 **Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020**|||||||||||

||0310796526<br>dated<br>09.06.2015|0310796526<br>dated<br>09.06.2015|03/94/040/00<br>173/AM16/<br>**(E-24522)**|applicant via email dated 04.05.2019 requested<br>to correct the AA No. 0310796526 instead of<br>0310798526. The case was considered in M. No.<br>12/81 dt. 18.09.2019 and decided to refer the<br>case to Consultant (TEC-3). In M. No. 24/81<br>dated 18.03.2020, the Committee noted that the<br>complete set of representation/documents has not<br>yet been referred to Consultant (TEC-3) as<br>decided in M. No. 21/81dated 22.01.2020.<br>Therefore, the Committee directed to forward all<br>the relevant documents to Consultant (TEC-3)<br>immediately. Scanned copies of complete set of<br>applications along with all concerned/related<br>documents (reply to queries raised etc.) in<br>chronological order was sought from the<br>applicant vide email dated 10.08.2020. The case<br>was last considered in M. No. 06/81 dt.<br>25.08.2020, the Committee noted that the<br>applicant via email dated 11.08.2020 requested<br>for some more time to submit the complete<br>application and along with relevant documents.<br>Therefore, the Committee decided to wait for<br>reply of the applicant. Final reminder was sent to<br>the applicant on 08.10.2020.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>noted that the applicant vide<br>email<br>dated<br>10.10.2020<br>requested to close the matter<br>as they are withdrawing their<br>request of amendment in<br>licence number. Therefore,<br>the**Committee decided to**<br>**reject the request of the**<br>**applicant with the condition**<br>**that the case will not be**<br>**reopened in future and**<br>**concerned RA to finalize**<br>**action for closer of the case.**<br>RA concerned may take<br>suitable consequential action<br>accordingly.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>|
|---|---|---|---|---|---|---|
|R14|<br>Anglo Steel<br>Pvt. Limited<br>0310796527<br>dated<br>09.06.2015||01/81/050/00<br>186/AM16/<br>03/94/040/00<br>182/AM16/<br>**(E-24523)**|The case was approved in Norms Committee-II<br>Special Meeting held on 11.12.2017. The<br>applicant via email dated 04.05.2019 has<br>requested to correct the AA No. 0310796527<br>instead of 0310798527. The case was last<br>considered in M. No. 12/81 dt. 18.09.2019 and<br>decided to refer the case to Consultant (TEC-3).<br>In M. No. 24/81 dated 18.03.2020, the<br>Committee noted that the complete set of<br>representation/documents has not yet been<br>referred to Consultant (TEC-3) as decided in M.<br>No. 21/81dated 22.01.2020. Therefore, the<br>Committee directed to forward all the relevant<br>documents to Consultant (TEC-3) immediately.<br>Scanned copies of complete set of applications<br>along with all concerned/related documents<br>(reply to queries raised etc.) in chronological<br>order was sought from the applicant vide email<br>dated 10.08.2020. The case was last considered<br>in M. No. 06/81 dt. 25.08.2020, the Committee<br>noted that the applicant via email dated<br>11.08.2020 requested for some more time to<br>submit the complete application and along with<br>relevant documents. Therefore, the Committee<br>decided to wait for reply of the applicant. Final<br>reminder<br>was<br>sent<br>to<br>the<br>applicant<br>on<br>08.10.2020.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted that the applicant vide<br>email<br>dated<br>10.10.2020<br>requested to close the matter<br>as they are withdrawing their<br>request of amendment in<br>licence number. Therefore,<br>the**Committee decided to**<br>**reject the request of the**<br>**applicant with the condition**<br>**that the case will not be**<br>**reopened in future and**<br>**concerned RA to finalize**<br>**action for closer of the case.**<br>RA concerned may take<br>suitable consequential action<br>accordingly.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>**Rejected**|
|R15|<br>Nagreeka<br>Indcon<br>Products(P)||01/81/050/00<br>336/AM18/|The case was ratified in M. No. 2/81-ALC2/2018<br>dated 29.05.2018 by allowing the quantity of<br>import item 1.05 Kg/Kgcontent in the export|<br> <br> <br>The Committee decided to<br>remind DPIIT for expediting<br>the comments.|<br> <br>Deferred|
|||**53 |**P a g e  6 4 **Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020**|||||

Ltd. 03/95/040/00 product. The applicant vide letter dated 343/AM18/ 18.03.2019 requested for revision of ratified 0310815357 norms. As per decision of M. No. 12/81 dt. dated (E-24524) 18.09.2019, the case was referred to DPIIT on 23.08.2017 28.10.2019. In M. No. 15/81 dt. 30.10.2019, on the request of DPIIT, the Committee decided to send again a copy of application/representation to DPIIT on 09.12.2019 for examination. In M. No. 21/81 dated 22.01.2020, decided to seek from the applicant to furnish the following information as per written comments given by DPIIT vide U. O. No.: P-47011/354/2019-TSW dated 21.01.2020: Sl. No. 3 & 11 of the SDF. As per NC decision, D/L was sent to the applicant on 05.03.2020. The applicant's reply dt. 13.03.2020 was sent to DPIIT via email on 16.03.2020. Also, the applicant's reply dt. 12.03.2020 along with samples sent to DPIIT on 18.03.2020. The case was considered in M. No. 24/81 dt. 18.03.2020 and decided to wait for the comments. The case was last considered in M. No. 06/81 dt. 25.08.2020, the Committee noted the comments of DPIIT vide U. O. No.: P- 47011/354/2019-TSW dated 05.05.2020 wherein DPIIT stated that the applicant asked for wastage on different products (Aluminium Foil containers- other than having rectangular/ square shape) is 16 to 20%. However, as the aluminium foil scrap has recoverable value. Therefore, the Committee decided to seek from the applicant to furnish following information as per comments given by DPIIT: 1. To provide sale price of aluminium foil scrap generated during the manufacturing process supported by documentary evidence like copies of sale invoice etc. As per NC decision, D/L was sent to the applicant on 08.10.2020. The applicant's reply dt. 09.10.2020 was sent to DPIIT on 12.10.2020. However, no comments have been received yet. The case was ratified in M. No. 9/81-ALC2/2018 The Committee considered Approved dated 02.01.2019 as per written comments of the case as per agenda. MoS vide U. O. No.: 2(6)/2017-TD dated Consultant (SKB) informed 13.12.2018. The applicant vide letter dated that on the basis of 01/81/050/0 National Steel 25.04.2019 requested for revision of ratified information provided by 0187/AM18/ And Agro norms as per the statement of the actual export RLA, the total Export Industries Ltd. made under the AA. As per decision of M. No. Obligation against the AA R16 56/24/040/00 12/81 dt. 18.09.2019, the case was referred to was 4988.54 MT. However, 051/AM17/ 5610005104 MoS on 25.10.2019 followed by an I.D. due to missing of export dated reminder on 20.01.2020. In M. No. 21/81 dated thickness of 0.34 mm & 0.43 (E-24525) 23.03.2017 22.01.2020 the representative of MoS informed mm (Coating weight 110 that the case is under examination. Therefore, the Gm/m[2] and 70 gm/m[2] & Committee decided to wait for the comments. weight 20.265 MT and The case was considered in M. No. 24/81 dt. 20.610 MT), the total weight 18.03.2020 and decided to remind MoS to came down to 4947.67 MT.

54 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

			expedite the comments. A reminder was issued<br>to MoS on 07.08.2020. The case was last<br>considered in M. No. 06/81 dt. 25.08.2020 and<br>decided to refer the case to Consultant (SKB) for<br>examination as no comments are being furnished<br>by MoS. As per decision, the case was referred<br>to Consultant (SKB) via email on 07.10.2020.	<br> <br> <br> <br> <br> <br>Hence. the calculation of the<br>quantity of inputs for the<br>aforesaid<br>thicknesses<br>indicating total quantity of<br>export and import items to be<br>allowed on per tonne basis as<br>per the revised norm C: 2055<br>published by DGFT vide PN<br>No 33(RE: 2012)/2009-2014<br>dated 30.11.2012.<br>Therefore,<br>the<br>Committee<br>decided torevisethe ad-hoc<br>as per written comments of<br>Consultant<br>(SKB).<br>(Copy<br>enclosed)<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R17	<br>Svam<br>Packaging<br>Industries<br>Private<br>Limited<br>0510398071<br>dated<br>30.03.2016	01/81/050/00<br>173/AM17/<br>05/24/040/00<br>626/AM16/<br>(E-24526)	The case was ratified in M. No. 4/81-ALC2/2018<br>dated 27.08.2018 as per written comments of<br>DIPP vide F. No. 7/176/2018-TSW dated<br>27.06.2018. The applicant vide letter dated<br>10.10.2018 requested for revision of ratified<br>norms. As per decision of M. No. 12/81 dt.<br>18.09.2019, the case was referred to DPIIT on<br>28.10.2019<br>followed<br>by<br>a<br>reminder<br>on<br>20.01.2020. As per NC decision of M. No. 21/81<br>dated 22.01.2020 a complete set of application/<br>representation was referred to DPIIT on<br>13.02.2020. The case was considered in M. No.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind the applicant for<br>furnishing<br>the<br>requisite<br>information.	<br> <br> <br>Deferred
			24/81 dt. 18.03.2020 and decided to remind<br>DPIIT to expedite the comments. A reminder<br>was issued to DPIIT on 07.08.2020. However, no<br>comments have been received yet. The case was<br>last considered in M. No. 06/81 dt. 25.08.2020<br>and decided to remind again DPIIT for<br>expediting the comments. Scanned copies of<br>complete set of applications along with all<br>concerned/related documents (reply to queries<br>raised etc.) in chronoligical order was sought<br>from the applicant vide email dated 13.08.2020<br>followed by a reminder on 07.10.2020. However,<br>no replyhas been receivedyet.
R18	<br>Vedanta<br>Limited<br>3510044672<br>dated<br>17.02.2015	01/81/171/00<br>019/AM16/<br>35/24/039/00<br>003/AM15/<br>(E-24528)	The case was ratified in M. No. 01/81 dated<br>10.04.2019 as per written comments given by<br>Consultant (TEC-3). The applicant vide letter<br>dated 06.06.2019 requested for revision of<br>ratified norms. The case was considered in M.<br>No. 12/81 dt. 18.09.2019 and decided to refer the<br>case to Consultant (TEC-3) for examination. The<br>case was referred to Consultant (TEC-3) on<br>06.12.2019. The case was last considered in M.<br>No. 21/81 dated 22.01.2020,Consultant(TEC-3)	<br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred

55 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

informed that the applicant has requested for wastage on gold & silver for which there is no justification. Therefore, the Committee decided to call the applicant for personal hearing to explain the case before Norms Committee in the forthcoming NC meeting. As per NC decision, an email dated 13.03.2020 sent to the applicant to attend PH on 18.03.2020. The case was considered in M. No. 24/81 dt. 18.03.2020 and the Committee noted that nobody appeared to attend the personal hearing on behalf of the applicant. Therefore, the Committee decided to give one more opportunity to the applicant for personal hearing. As per NC decision, an email dated 24.08.2020 was sent to the applicant requesting to attend PH on 25.08.2020.The case was last considered in M. No. 06/81 dt. 25.08.2020, the Committee heard the representatives of the applicant during personal hearing held through video conferencing. On the advice of Consultant (TEC-3), the Committee directed the representatives to furnish following information:

Specific item of import, its quantity & copy of bill of entry.
Specific item of export, its quantity & copy of shipping bill.
Certificate of analysis of total quantity of import & export.
Is there any by-product in the process? If yes details thereof.

As per NC decision, D/L was sent to the applicant on 08.10.2020. The applicant's reply dt. 15.10.2020 was sent to Consultant (TEC-3) on 26.10.2020. However, no comments have been received yet.

The case was approved in M. No. 06/81 dated The Committee considered Deferred 26.06.2019 as per written comments given by the case as per agenda and MeitY vide F. No.: 17(41)/2015-IPHW dated noted that as decided in 25.06.2019. The applicant vide letter dated Meeting No. 24/81 dated 27.02.2019 had requested for revision of ratified 18.03.2020, MeitY was asked 01/81/050/00 norms. They vide letters dated 01.03.2019 and via email dated 10.08.2020 to FCI OEN 154/AM16/ 09.04.2019 had reiterated the same issue. The clarify for how they CONNECTO case was considered in M. No. 19/81 dt. recommended ad-hoc norms RS LIMITED R19 10/24/040/00 26.12.2019, the Committee considered the report if the quantities of import 140/AM15/ of study group and decided to refer the matter to items mentioned in its 1010059108 MeitY for calculating the entitlement. The case recommendation vide F. dated (E-24738) was considered in M. No. 24/81 dt. 18.03.2020, No. 17(41)/2015-IPHW 13.04.2015 the Committee considered the case as per agenda dated 25.06.2019 are not and Consultant (TEC-3) informed that the matching with the quantities of import items mentioned by MeitY quantities as mentioned in in its recommendation vide F. No. 17(41)/2015- the AA . However, no IPHW dated 25.06.2019 are not matching with comments have been the quantities as mentioned in the AA. Therefore, received yet. Therefore, the

56 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020


					the Committee decided to refer the case back to<br>MeitY for comments. As per decision of M. No.<br>24/81 dt. 18.03.2020 the case was referred to				<br> <br> <br>Committee decided to remind<br>MeitY for expediting the<br>comments.		<br>
					,<br>MeitY on 10.08.2020. The case was last				<br> <br>
					considered i<br>Committee<br>and noted th<br>	n M. No. 06/81 dt. 25.08.202<br>considered the case as per the a<br>at MeitY via email dated 25.08<br>		0, the<br>genda<br>.2020<br>	<br> <br> <br>
					informed th<br>Therefore, t<br>comments	at the case is under examin<br>he Committee decided to wait f		ation.<br>or the	<br>
					.
R20	<br>FCI OEN<br>CONNECTO<br>RS LIMITED<br>1010058810<br>dated<br>26.09.2014				The case was approved in M. No. 6/81 dated<br>26.06.2019 as per written comments given by<br>MeitY vide F. No.: 17(40)/2015-IPHW dated<br>25.06.2019. The applicant vide letter dated<br>27.02.2019 had requested for revision of ratified				<br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted<br>that<br>as<br>decided<br>Meeting No. 24/81 dated<br>18.03.2020, MeitY was asked		<br> <br> <br> <br> <br>De
					<br>norms. They vide letters dated 01.03.2019 and				<br> <br> <br>via email dated 10.08.2020to
		I OE<br>NEC<br>IMIT<br>0588<br>ated<br>9.20	N	01/81/050/00<br>	09.04.2019<br>No. 19/81<br>considered t<br>	had reiterated the same issue.<br>dt. 26.12.2019, the Com<br>he report of study group and de<br>		In M.<br>mittee<br>cided<br>	<br> <br> <br> <br>clarify for how th<br>recommended for<br>Alloy as the imp<br>“ <br>”	e norms<br>Copper<br>ort item<br>is<br>not<br>he<br>AA.<br>ents have	<br> <br> <br>
			TO<br>ED	<br>421/AM15/<br>10/24/040/00	to refer the<br>entitlement.<br>no 24/81 dt	matter to MeitY for calculatin<br>The case was considered in me<br>18032020 the Consultant (T		g the<br>eting<br>EC-3)	<br> <br> <br>Copper<br>Alloy<br>mentioned<br>in<br>t<br>However no comm		<br> <br>
			10<br>14	058/AM15/<br>(E-24739)	. . ..,<br>informed that MeitY recommended wastage for<br>Copper Alloy but the import item“Copper<br>Alloy”is not mentioned in the AA. Hence, the<br>Committee decided to refer the case back to<br>MeitY for comments on the issue. As per				<br> <br> <br> <br> <br> <br>,<br>been received yet. Therefore,<br>the Committee decided to<br>remind MeitY for expediting<br>the comments.		<br> <br> <br>
					decision of M. No. 24/81 dt. 18.03.2020, the case<br>				<br>
					was referre<br>was last c<br>25.08.2020,<br>email dated	to MeitY on 10.08.2020. The<br>onsidered in M. No. 06/8<br>the Committee noted that Meit<br>25082020 informed that the c		case<br>1 dt.<br>Y via<br>ase is	<br> <br> <br>
					<br>under exam<br>decided to w	..<br>ination. Therefore, the Com<br>ait for the comments.		<br>mittee	<br>
R21	<br>GOLDSTONE<br>INFRATECH<br>LIMITED<br>0910065334<br>dated<br>08.08.2017				The case was rejected in M. No. 11/81-<br>ALC2/2018 dated 30.01.2019 due to non-<br>submission of reply to deficiency letter dated<br>04.10.2018. The applicant vide letter dated<br>19.11.2019 furnished reply and requested to fix<br>				<br> <br> <br> <br>The Committee considered<br>the case as per the agenda<br>and decided to fix the ad-hoc<br>norms<br>as<br>per<br>written<br>comments<br>given<br>by<br>		<br> <br> <br> <br> <br> <br>
					the ad-hoc norms. The case was considered in M.<br>i k				<br> <br>Consultant (TEC-1) as under:
		STO<br>ATE<br>ITE<br>0653<br>ated<br>8.20	NE<br>CH<br>D	<br>01/81/050/00<br>506/AM18/	No. 21/81d<br>from the a<br>information<br>1. Comple	ted 22.01.2020 and decde<br>pplicant to furnish the<br>as per advice of Consultant<br>te technical information	to see<br>following<br>(TEC-1):<br>as per		<br> <br> <br> <br>1. Quantity of imp<br>at Sl. No. 1, 2, 3<br>be allowed	ort items<br>& 4 may<br>with5%	<br> <br>
			34	09/24/040/00<br>209/AM18/	<br>Appendix 4<br>Compound	<br>E.2. Net weight of Silicon<br>in each of export product.	<br>e Rubber<br>3. Details		<br> <br> <br>wastage<br>accountability	with<br>in export.
			17		of indigenous input along with their quality<br>required<br>to<br>manufacture<br>Silicone<br>Rubber<br>Compound<br>for<br>each<br>export<br>product.<br>4.<br>Justification for 5% wastage for import item No.<br>5 to 10. As per NC decision, D/L was sent to the<br>applicant<br>on<br>05.03.2020.<br>The<br>case<br>was<br>nidrd in mtin n 24/81 dt 18032020				<br> <br> <br> <br> <br> <br> <br>2. Quantity of import items<br>at Sl. No. 5 to 8 may be<br>allowedas per GN-4.<br>RA concerned may take<br>suitable consequential action<br>rdinl		<br> <br> <br>
					cosee eeg o. . ..<br>and decided to remind the applicant for				<br> <br>accogy.

57 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

			furnishing the requisite information. Applicant’s<br>reply dt. 11.08.2020 was sent to Consultant<br>(TEC-1) on 11.08.2020. The case was last	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
			considered in M. No. 06/81 dt. 25.08.2020, the<br>Committee considered the case as per the agenda<br>and Consultant (TEC-1) informed that the
			applicant in its reply dated 11.08.2020 has given
			only name of indigenous inputs without their
			corresponding<br>quantity.<br>Therefore,<br>the
			Committee decided to seek from the applicant to
			furnish following information as per advice of
			Consultant (TEC-1):<br>1. Indigenous inputs with their quantity.<br>The applicant's reply dt. 28.09.2020 was sent to<br>Consultant(TEC-1)on 08.10.2020.
R22	<br>Jindal Saw<br>Limited<br>0510407878<br>dated<br>25.09.2018	01/81/050/00<br>651/AM19/<br>05/23/040/00<br>271/AM19/<br>(E-24800)	The case was ratified in M. No. 14/81-<br>ALC2/2019 dated 16.10.2019 as per written<br>comments dated 11.10.2019 given by Consultant<br>(TEC-3). The applicant vide representation dated<br>07.01.2020 requested to revise the ratified<br>norms. As per decision of M. No. 21/81 dated<br>22.01.2020 the representation was forwarded to<br>Consultant (TEC-3) on 22.01.2020. However, no<br>comments have been received yet. The case was<br>considered in meeting no. 24/81 dt. 18.03.2020<br>the Consultant (TEC-3) asked for physical file<br>for examination of the case. Therefore, the<br>Committee decided to send physical file to<br>Consultant<br>(TEC-3)<br>for<br>examination<br>&<br>comments. As per decision, the complete<br>application was sent to Consultant (TEC-3) via<br>email dated 14.08.2020. The case was last<br>considered in M. No. 06/81 dt. 25.08.2020,<br>Consultant (TEC-3) asked for physical file to<br>examine the case. The physical file (Part file)<br>was sent to Consultant (TEC-3) on 26.10.2020.<br>However,no comments have been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred
R23	<br>Jindal Saw<br>Limited<br>0510408874<br>Dated<br>11.12.2018	01/81/050/00<br>701/AM19/<br>05/23/040/00<br>391/AM19/<br>(E-24803)	The case was ratified in M. No. 5/81-ALC2/2019<br>dated 12.06.2019 as per written comments given<br>by Consultant (TEC-3). The applicant vide letter<br>dated 14.01.2020 stated that the quantity of<br>welding<br>consumables<br>i.e.<br>Welding<br>Wire,<br>Welding Flux, X-Ray films and CO2 wire are<br>less permitted to them. Therefore, they had<br>requested to revise the ad-hoc norms. As per<br>decision of M. No. 21/81 dated 22.01.2020 the<br>representation was forwarded to Consultant<br>(TEC-3) on 22.01.2020. The case was considered<br>in meeting no. 24/81 dt. 18.03.2020 and decided<br>to remind Consultant (TEC-3) for expediting the<br>comments. A reminder issued to consultant	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind the applicant for<br>furnishing<br>the<br>requisite<br>information.	<br> <br> <br>Deferred
			(TEC-3) on 25.05.2020 & 07.08.2020. The case
			was last considered in M. No. 06/81 dt.
			25.08.2020 and decided to seek from the

58 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

			applicant to furnish following information as per	<br> <br> <br> <br>
			comments given by Consultant (TEC-3):<br>Detailed calculations supported with documents<br>for requirement of welding consumables for<br>connector welding. As per NC decision, D/L was<br>sent to applicant on 08.10.2020. However, no<br>replyhas been receivedyet.
R24	<br>JINDAL SAW<br>LIMITED<br>0510411870<br>Dated<br>18.09.2019	<br>01/81/050/00<br>245/AM20/<br>05/23/040/00<br>236/AM20/<br>(E-24804)	The case was considered in M. No. 18/81-<br>ALC2/2019 dated 11.12.2019 and decided to<br>allow description of import items & quantities<br>per SION C-593 as per written comments dated<br>06.12.2019 given by Consultant (TEC-3). The<br>applicant vide letter dated 14.01.2020 stated that<br>the quantity of welding consumables i.e.<br>Welding Wire, Welding Flux, X-Ray films and<br>CO2 wire are less permitted to them. Therefore,<br>they had requested to revise the ad-hoc norms.<br>As per decision of M. No. 21/81 dated<br>22.01.2020 the representation was forwarded to<br>Consultant (TEC-3) on 22.01.2020. The case was<br>considered in meeting no. 24/81 dt. 18.03.2020<br>and decided to remind Consultant (TEC-3) for<br>expediting the comments. A reminder was issued	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>remind the applicant for<br>furnishing<br>the<br>requisite<br>information.	<br> <br> <br>Deferred
			to consultant (TEC-3) on 25.05.2020. The case
			was last considered in M. No. 06/81 dt.
			25.08.2020 and decided to seek from the
			applicant to furnish following information as per
			comments given by Consultant (TEC-3):
			1. Detailed calculations supported with
			documents for requirement of welding
			consumables for connector welding.
			As per NC decision, D/L was sent to the
			applicant on 08.10.2020. However, no reply has
			been receivedyet.
R25	<br>NATIONAL<br>STEEL AND<br>AGRO<br>INDUSTRIES<br>LTD.<br>5610004971<br>Dated<br>08.08.2016	<br>01/81/050/00<br>251/AM17/<br>56/24/040/00<br>027/AM17/	Initially, the case was rejected in M. No. 2/81-<br>ALC2/2017 dated 18.04.2017 due to non-<br>submission of reply to MoS deficiency letter<br>dated 20.10.2016. The case was considered in M.<br>No. 9/81 dated 25.07.2017 and decided to ratify<br>the norms for the above AA as per written<br>comments of MoS vide UO No. 2(10)/2016-TD<br>dated 05.07.2017. The applicant’s representation<br>dated 26.11.2018 against above NC decision was<br>again considered in M. No. 11/81-ALC2/2019<br>dated 04.09.2019. The case was considered in M.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait<br>for<br>reply<br>of<br>the<br>applicant.	<br> <br>Deferred
			No. 24/81 dt. 18.03.2020 the Committee noted<br>that the applicant’s representation has not yet<br>been referred to MoS for examination as decided<br>in M. No. 21/81 dated 22.01.2020. Therefore, the<br>Committee directed to forward the applicant’s<br>representation to MoS immediately. Scanned<br>copies of complete set of applications along with<br>all concerned/related documents (reply to queries<br>raised etc.)in chronological order has been

59 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

			sought from the applicant vide email dated<br>10.08.2020. The case was last considered in M.<br>No. 06/81 dt. 25.08.2020 and decided to remind<br>the applicant for furnishing the requisite<br>information. Final reminder was issued to the<br>applicant on 08.10.2020. However, no reply has<br>been receivedyet.	<br> <br> <br> <br> <br>
R26	<br>AMC<br>Cookware<br>(India) Pvt.<br>Ltd.<br>0710110362<br>Dated<br>02.09.2016	01/81/050/00<br>868/AM19/<br>07/24/040/00<br>176/AM17/<br>(E-24809)	The case was ratified in Meeting No. 4/81-<br>ALC2/2020 dated 17.06.2020 as per written<br>comments given by DPIIT vide U. O. No.: P-<br>47011/189/2019-TSW dated 30.06.2020. The<br>applicant via email dated 08.09.2020 requested<br>for re-fixation of Norms for such items in which<br>the shape of the output product is oval/oblong<br>made out of sheet. The applicant has provided<br>the dimensions and shape of the input and output<br>products. In these cases the NC has given 10%<br>wastage considering made out of circles.<br>The representation was forwarded to DPIIT vide<br>email dated 08.10.2020 for examination of the<br>case. However, no comments have been received<br>yet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted that DPIIT informed<br>that<br>the<br>case<br>is<br>under<br>examination.<br>Hence,<br>the<br>Committee decided to wait<br>for the comments.	<br> <br> <br> <br> <br> <br>Deferred
R27	<br>AMC<br>Cookware<br>(India) Pvt.<br>Ltd.<br>0710110836<br>Dated<br>23.12.2016	01/81/050/01<br>063/AM19/<br>07/24/040/00<br>313/AM17/<br>(E-24810)	The case was ratified in Meeting No. 4/81-<br>ALC2/2020 dated 17.06.2020 as per written<br>comments given by DPIIT vide U. O. No.: P-<br>47011/189/2019-TSW dated 30.06.2020. The<br>applicant via email dated 08.09.2020 requested<br>for re-fixation of Norms for only such items in<br>which the shape of the output product is<br>oval/oblong made out of sheet. The applicant<br>has provided the dimensions and shape of the<br>input and output products. In these cases the NC<br>has given 10% wastage considering made out of<br>circles. The representation was forwarded to<br>DPIIT<br>vide<br>email<br>dated<br>08.10.2020<br>for<br>examination of the case. However, no comments<br>have been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted that DPIIT informed<br>that<br>the<br>case<br>is<br>under<br>examination.<br>Hence,<br>the<br>Committee decided to wait<br>for the comments.	<br> <br> <br> <br> <br> <br>Deferred
R28	<br>AMC<br>Cookware<br>(India) Pvt.<br>Ltd.<br>0710111264<br>Dated<br>09.03.2017	01/81/050/01<br>075/AM19/<br>07/24/040/00<br>383/AM17/<br>(E-24811)	The case was ratified in Meeting No. 4/81-<br>ALC2/2020 dated 17.06.2020 as per written<br>comments given by DPIIT vide U. O. No.: P-<br>47011/189/2019-TSW dated 30.06.2020. The<br>applicant via email dated 08.09.2020 requested<br>for re-fixation of Norms for only such in which<br>the shape of the output product is oval/oblong<br>made out of sheet. The applicant has provided<br>the dimensions and shape of the input and output<br>products. In these cases the NC has given 10%<br>wastage considering made out of circles.<br>The representation was forwarded to DPIIT vide<br>email dated 08.10.2020 for examination of the<br>case. However, no comments have been received<br>yet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted that DPIIT informed<br>that<br>the<br>case<br>is<br>under<br>examination.<br>Hence,<br>the<br>Committee decided to wait<br>for the comments.	<br> <br> <br> <br> <br> <br>Deferred

60 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

R29	<br>AMC<br>Cookware<br>(India) Pvt.<br>Ltd.<br>0710111502<br>Dated<br>28.04.2017	01/81/050/00<br>766/AM19/<br>07/24/040/00<br>016/AM18/<br>(E-24812)	The case was ratified in Meeting No. 4/81-<br>ALC2/2020 dated 17.06.2020 as per written<br>comments given by DPIIT vide U. O. No.: P-<br>47011/189/2019-TSW dated 30.06.2020. The<br>applicant via email dated 08.09.2020 requested<br>for Re-fixation of Norms for only such items in<br>which the shape of the output product is<br>oval/oblong made out of sheet. The applicant<br>has provided the dimensions and shape of the<br>input and output products. In these cases the NC<br>has given 10% wastage considering made out of<br>circles.<br>The representation was forwarded to DPIIT vide<br>email dated 08.10.2020 for examination of the<br>case. However, no comments have been received<br>yet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda and<br>noted that DPIIT informed<br>that<br>the<br>case<br>is<br>under<br>examination.<br>Hence,<br>the<br>Committee decided to wait<br>for the comments.	<br> <br> <br> <br> <br> <br>Deferred
R30	<br>Dynamic Flow<br>Products Pvt.<br>Ltd.<br>0310830300<br>Dated<br>15.07.2019	<br>01/81/050/00<br>172/AM20/<br>03/94/040/00<br>248/AM20/<br>(E-23927)	The case was ratified in Meeting No. 5/81-<br>ALC2/2020 dt. 16.07.2020 as per written<br>comments given by Consultant (TEC-3). The<br>applicant vide letter dated 10.08.2020 requested<br>for<br>re-fixation<br>of<br>ad-hoc<br>norms.<br>The<br>representation was forwarded to Consultant<br>(TEC-3) vide email dated 20.10.2020 for<br>examination of the case.	<br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda.<br>Consultant (TEC-3) informed<br>that export product consists<br>of two types of products and<br>wastage on one is high & on<br>other is low. The applicant<br>has<br>provided<br>bifurcated<br>quantity of C & C Hose and<br>Pup joints. Therefore, the<br>Committee decided torevise<br>the ad-hoc norms as per<br>comments<br>given<br>by<br>Consultant (TEC-3) via email<br>dated 26.10.2020 as under:<br>Export item:<br>1. C & C Hose is 331142<br>Kgs containing 260506<br>Kgs seamless pipes.<br>2. Pup joint is 8766Kgs<br>containing<br>6513Kgs<br>seamless pipes.<br>Import Item:<br>1. Quantity of import item<br>(Seamless Alloy Steel<br>Pipes) may be allowed as<br>341.30 MTfor 1stexport<br>item with31% wastage<br>after20% recovery&<br>6.66MTfor 2ndexport<br>item including2.87%<br>wastages.<br>Note: Grade of steel to	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved

61 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

				match in import & export<br>item.<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br>
R31	<br>Dynamic Flow<br>Products Pvt.<br>Ltd.<br>0310827574<br>dated<br>08.03.2019	<br>01/81/050/01<br>1 45/AM19/<br>03/94/040/01<br>0 61/AM19/<br>(E-24814)	<br>The case was rejected in Meeting No. 5/81-<br>ALC2/2020 dt. 16.07.2020, the Committee<br>considered the case as per agenda and Consultant<br>(TEC-3) informed that earlier the norms were<br>recommended<br>on<br>the<br>basis<br>of<br>wastage<br>information given by the applicant vide their<br>letter dated 23.10.2019 after taking 20%<br>recovery. Therefore, the Committee decided to<br>maintain status-qua. The applicant vide letter<br>dated 10.08.2020 requested for re-fixation of ad-<br>hoc norms. The representation was forwarded to<br>Consultant (TEC-3) vide email dated 20.10.2020<br>for examination of the case.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda.<br>Consultant (TEC-3) informed<br>that export product consists<br>of two types of products and<br>wastage on one is high & on<br>other is low. The applicant<br>has<br>provided<br>bifurcated<br>quantity of C & C Hose and<br>Pup joints. Therefore, the<br>Committee decided torevise<br>the ad-hoc norms as per<br>comments<br>given<br>by<br>Consultant (TEC-3) via email<br>dated 26.10.2020 as under:<br>Export item:<br>1. C & C Hose is 374001<br>Kgs containing 266468<br>Kgs seamless pipes.<br>2. Pup joint is 26939Kgs<br>containing<br>26379Kgs<br>seamless pipes.<br>Import Item:<br>1. Quantity of import item<br>(Seamless Alloy Steel<br>Pipes) may be allowed as<br>354.50 MTfor 1stexport<br>item with33% wastage<br>after20% recovery&<br>26.939MTfor 2ndexport<br>item including2.12%<br>wastages.<br>Note: Grade of steel to<br>match in import & export<br>item.<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R32	<br>Dynamic Flow<br>Products Pvt.<br>Ltd.<br>0310819096<br>Dated	<br>01/81/050/00<br>106/AM19/<br>03/94/040/00<br>873/AM18/	The case was ratified in Meeting No. 5/81-<br>ALC2/2020 dt. 16.07.2020 as per written<br>comments given by Consultant (TEC-3). The<br>applicant vide letter dated 10.08.2020 requested<br>for<br>re-fixation<br>of<br>ad-hoc<br>norms.<br>The<br>representation was forwarded to Consultant	<br> <br> <br> <br> <br>The Committee considered<br>the case as per agenda.<br>Consultant (TEC-3) informed<br>that export product consists<br>of two types of products and<br>wastage on one is high & on	<br> <br> <br> <br> <br> <br>Approved

62 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

	12.02.2018	(E-24815)	(TEC-3) vide email dated 20.10.2020 for<br>examination of the case.	<br>other is low. The applicant<br>has<br>provided<br>bifurcated<br>quantity of C & C Hose and<br>Pup joints. Therefore, the<br>Committee decided torevise<br>the ad-hoc norms as per<br>comments<br>given<br>by<br>Consultant (TEC-3) via email<br>dated 26.10.2020 as under:<br>1. Quantity of import item<br>(Seamless Alloy Steel<br>Pipes) may be allowed as<br>386.30 MTfor 1stexport<br>item with36% wastage<br>after20% recovery&<br>66.90MTfor 2ndexport<br>item including2.39%<br>wastages.<br>Note:<br>1. Grade of steel to match<br>in import & export<br>item.<br>2. The rest of the decision<br>as decided by NC in its<br>Meeting<br>No.<br>05/81<br>dated 16.07.2020 shall<br>remain unchanged.<br>RA concerned may take<br>suitable consequential action<br>accordingly.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R33	<br>Forming India<br>Private<br>Limited<br>3110066975<br>Dated<br>08.02.2018	01/81/050/00<br>045/AM19/<br>31/83/040/00<br>143/AM18/<br>(E-24816)	The case was ratified in Meeting No. 2/81-<br>ALC2/2018 dt. 29.05.2018, and quantity of<br>import item i.e.‘Hot dipped Galvanised Coil’to<br>manufacture export product‘Shape & Section<br>from Flat Rolled Product’was allowed as<br>287640 Kg i.e. 1.02Kg/Kg content in the export<br>item. However, the applicant via email dated<br>08.10.2020 had requested for re-fixation of<br>norms. The applicant was requested to submit<br>proof evidencing payment of composition fee.<br>The case was referred to Consultant (TEC-3)<br>vide email dated 20.10.2020 for comments. The<br>applicant via email dated 22.10.2020 has<br>furnished a copy of composition fee of Rs.5000/-<br>receipt<br>dated<br>14.10.2019.<br>However,<br>no<br>comments<br>have<br>been<br>received<br>yet<br>form<br>Consultant(TEC-3).	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred
R34	<br>Forming India<br>Private<br>Limited	01/81/050/00<br>115/AM19/<br>31/83/040/00	Ad-hoc norms were ratified in NC-2 Meeting<br>No.<br>3/81-ALC2/2018<br>dt.<br>14.08.2018<br>and<br>quantity of import item i.e.‘Hot dipped<br>Galvanised Coil’to manufacture exportproduct	<br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred

63 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

	3110067014<br>Dated<br>27.03.2018	173/AM18/<br>(E-24817)	‘Shape & Section from Flat Rolled Product’was<br>allowed as 91313.46 Kg i.e. 1.02Kg/Kg content<br>in the export item. However, the applicant via<br>email dated 08.10.2020 had requested for re-<br>fixation of norms. The applicant was requested to<br>submit proof evidencing payment of composition<br>fee. The case was referred to Consultant (TEC-3)<br>vide email dated 20.10.2020 for comments. The<br>applicant via email dated 22.10.2020 has<br>furnished a copy of composition fee of Rs.5000/-<br>receipt<br>dated<br>14.10.2019.<br>However,<br>no<br>comments<br>have<br>been<br>received<br>yet<br>form<br>Consultant(TEC-3).	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R35	<br>Forming India<br>Private<br>Limited<br>3110065999<br>Dated<br>09.03.2018	01/81/050/00<br>1 16/AM19/<br>3l/83/040/00<br>159/AM l8/<br>(E-24820)	The case was ratified in Meeting No. 3/81-<br>ALC2/2018 dt. 14.08.2018and quantity of import<br>item i.e.‘Hot dipped Galvanised Coil’to<br>manufacture export product‘Shape &Section<br>from Flat Rolled Product’was allowed as<br>98799.24 Kg i.e. 1.02Kg/Kg content in the<br>export item. However, the applicant via email<br>dated 08.10.2020 had requested for re-fixation of<br>norms. The applicant was requested to submit<br>proof evidencing payment of composition fee.<br>The case was referred to Consultant (TEC-3)<br>vide email dated 20.10.2020 for comments. The<br>applicant via email dated 22.10.2020 has<br>furnished a copy of composition fee of Rs.5000/-<br>receipt<br>dated<br>14.10.2019.<br>However,<br>no<br>comments<br>have<br>been<br>received<br>yet<br>form<br>Consultant(TEC-3).	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided to<br>wait for the comments.	<br>Deferred

The meeting ended with a vote of thanks to the Chair.

Shobhit Gupta Dy. Director General of Foreign Trade E-mail: nc2.dgft@nic.in shobhit.gupta@gov.in

64 | P a g e 6 4 Minutes of NC-II Meeting No. 09/81 scheduled for 20.10.2020 and held on 27.10.2020

SDF

Export Items:	Export Items:	Export Items:
	1	Model number, technical specification and specific quantity-both in terms of number (if<br>any)and/or weight,of each exportproduct(Appendix-33 of current HBP refers).
	2	Detail technical note on manufacturing process includingthe relevant flowsheet.
	3	Detail technical drawings with dimension of each export product, Catalogue, if any, may<br>also be furnished.
	4	Weight of each Export Product.
	5	Weight of each of the imported and indigenous input, separately for each product, for the<br>purpose of material balancing. Net weight (Gross weight minus wastage) for each<br>imported and indigenous input in the export product may be indicated. Net weight along<br>with details of other imported input to be used in the resultant product and sought to be<br>imported/procured from sources other than the license,if any,mayalso be indicated.
Import Items:
	6	Information about the inputs required per unit of the resultant product as per Sl. No. 1 of<br>Appendix-11A appearingin current HBP(Vol.I)separatelyfor eachproduct.
Components:
	7	Technical characteristics /part numbers,if any.
	8	Assembly drawings/diagrams of the resultant product showing placement and exact use<br>of components in the exportproduct(s).
	9	Bifurcated quantities of components to be accounted for in the resultant product and the<br>requirement of components as spares. Raw Material / Consumables.
	10	Size and specification including grade, composition, range, thickness etc. of the items<br>proposed for import.
	11	Starting from the specification of the export product, basic calculation as to how of raw<br>material proposed for import has been arrived at, including the net weight of components<br>to be manufactured out of these imported materials, wastages claimed at each stage of<br>manufacturing<br>with<br>complete<br>justification<br>and<br>supported<br>by<br>documentary<br>evidence/drawings etc.
	11(a)	Sheet layout diagram of the material indicatingthewastage duringblanking.
	12	Cross Sectional Diagram of export product with calculation of raw material requirement<br>and the weight of the Cable in Kg. per Km. Copy of relevant National/International<br>Standard/buyer’s data sheet mayalso be furnished.
	13	Weight of Steel, which requires imported welding material, giving break-up of:<br>i)<br>Steel Plates/Sheets upto 30mm thickness<br>ii)<br>Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness<br>iii) Steel Plates/Sheets more than 70 mm thickness.<br>iv) Others e.g.Flanges,Pipes,Tubes,Bars/Rods, Castings/Forgings etc.
	14	Particulars of the licenses obtained in the past and ratified by ALC (with or without<br>modification) for the same export product covered under this application, in view of<br>PublicNoticeNo.48dated 14.11.2002.
	15	Use of exportproduct.
	16	You are advised to applyfor SION.
	17	Please use expanded/full name of endproduct.Do not use the abbreviations/short form.
	18	--
	19	Any other information:
	20	The information called for must be submittedin duplicate within 15 daysfrom the date<br>of issue of this letter. The information may be directly sent to Chairman, NC-II, O/o<br>DGFT,UdyogBhawan,New Delhi-110011,Office Telephone No.: 23061562,Extn.267.

53/54

W-21/35/2020-IPHW-MeitY

114376/2020/IPHW

				AA No. 0410165474	AA No. 0410165474	AA No. 0410165474	AA No. 0410165474	AA No. 0410165474	AA No. 0410165474	AA No. 0410165474	AA No. 0410165474
					Calculation Sheet
Export Item	Export Item<br>Quantity(in Number)	Import Item	Per	Unit		UOM	Wastage Claimed	Wastage Allowed	Quantity Applied in<br>DGFT	Quantity Calculated	Quantity<br>Recommended
61/0-THERMISTER<br>LOOM OVERMOULD<br>ASSEMBLY To Part No.<br>302397-01/04	<br>250000	RESISTER LTCF6MH103F343 BLACK To Part No. T11TRLTCF6000	1.0000			Nos	0.00%<br>Net to Net Basis		250000.000	Net to Net Basis
		TEMINAL SIN -01T-18T To Part No. J08TMSIN-00282	2.0000			Nos	0.00%<br>Net to Net Basis		500000.000	Net to Net Basis
		COMPOUND MH65N FR BLACK To Par No. H14CDMH65N011	0.0050			KGS	10.00%	5.00%	1375.000	1312.500	1312.500
		CHEMICAL LOCITITE 495( 1 BOLLTE 20g) To Part No.<br>A11LTLO4950009	0.0515			Gram	10.00%	5.00%	14162.500	13518.750	13518.750
61/0-HARNESS-TRIAC R<br>L OUT To part No. 196-<br>144013-01/06	<br>150000	WIRE UL1569 16AWG(26X0.254) 105 C 300V BLACK To Part No.<br>L09WR15690061	0.2400			Meter	10.00%	5.00%	39600.000	37800.000	37800.000
		SLEEVE DF-187U BLUE To Part No. S15SLDF-180001	1.0000			Nos	0.00%<br>Net to Net Basis		150000.000	Net to Net Basis
		TERMINAL SFPS-41T-187-8 To Part No. J08TMSFPS-0270	2.0000			Nos	0.00%<br>Net to Net Basis		300000.000	Net to Net Basis
		TERMINAL B187542BS2 To Part No. J06TMB187542BS	1.0000			Nos	0.00%<br>Net to Net Basis		150000.000	Net to Net Basis
		WIRE UL1569 16AWG(26X0.254) 105 C 300V BROWN To Part No.<br>L09WR1569#0062	0.2930			Meter	10.00%	5.00%	48345.000	46147.500	46147.500
		TERMINAL J10TMA18710001 To Part No. A187122bBS-2	1.0000			Nos	0.00%<br>Net to Net Basis		150000.000	Net to Net Basis
		TUBE CB-HFT 4.0MM- BLACK To Part No. C03TBCB-HF0012	0.0120			Meter	10.00%	5.00%	1980.000	1890.000	1890.000
61/0-WIRE HARNESS<br>To Part No. 0004674	424000	WIRE UL9975 24 (SOLID) GREEN To Part No. B01WR99750006	0.1520			Meter	10.00%	5.00%	70893.000	67670.400	67670.400
61/0-WIRE HARNESS<br>To Part No.<br>0004673/250-00848	446000	WIRE UL9975 24 (SOLID) RED To Par No. B01WR99750007	0.1520			Meter	10.00%	5.00%	74571.000	71181.600	71181.600
61/0-WIRE HARNESS<br>To Part No. 0004644	515000	RESIN A300N BLACK/WIRE UL9975 24 (SOLID) BLACK To Part No.<br>H14CDA0000004	0.1520			Meter	10.00%	5.00%	86108.000	82194.000	82194.000
61/0-BALL LOOM ASSY<br>To No. 131937-02/02	50000	TERMINAL SFPS-41T-187 To Part No. J08TMSFPS-0269	1.0000			Nos	0.00%<br>Net to Net Basis		50000.000	Net to Net Basis
		TERMINAL F110082BS2 To Part No. J06TMF11000008	1.0000			Nos	0.00%<br>Net to Net Basis		50000.000	Net to Net Basis
		TERMINAL 11132-00 To Part No. R02TM111320007	2.0000			Nos	0.00%<br>Net to Net Basis		100000.000	Net to Net Basis
		SLEEVE 244535-23 TRANS BLUE To Part No. S13SL244530014	1.0000			Nos	0.00%<br>Net to Net Basis		50000.000	Net to Net Basis
		SLEEVE DF-187U BLUE To Part No. S15SLDF-180001	1.0000			Nos	0.00%<br>Net to Net Basis		50000.000	Net to Net Basis
		TUBE F32(3.0 X 0.25 X 200M) BLACK To Part No. S29TB3.0X00017	0.0050			Meter	10.00%	5.00%	275.000	262.500	262.500
		WIRE UL3239 22 STR 19/0.16 3Kv WHITE To Part No.<br>S30WR32390268	0.3280			Meter	10.00%	5.00%	18040.000	17220.000	17220.000
		WIRE UL3239 22 STR 19/0.16 3Kv GREY To Part no.<br>S30WR32390269	0.2950			Meter	10.00%	5.00%	16225.000	15487.500	15487.500
		COMPOUND PERLOX 15GF-30 (06d-999-716) BLACK To Part No.<br>J05CD232050007	0.0075			KGS	10.00%	5.00%	412.500	393.750	393.750
61/0-HARNESS WIFI<br>FERRITE To Part No.<br>196-283155-01/02	150000	FERRITE 74270113 To Part No. W004FR74270113	1.0000			Nos	0.00%<br>Net to Net Basis		150000.000	Net to Net Basis
		WIRE UL106128 STR 7/0.127 BLACK To Part No. S30WR10610248	0.0820			Meter	10.00%	5.00%	13530.000	12915.000	12915.000
		WIRE UL106128 STR 7/0.127 GREEN To Part No. S30WR10610163	0.0810			Meter	10.00%	5.00%	13365.000	12757.500	12757.500
		WIRE UL106128 STR 7/0.127 BLUE To Part No. S30WR10610166	0.0810			Meter	10.00%	5.00%	13365.000	12757.500	12757.500
		WIRE UL106128 STR 7/0.127 ORANGE To Part No.<br>S30WR10610164	0.0810			Meter	10.00%	5.00%	13365.000	12757.500	12757.500
		WIRE UL106128 STR 7/0.127 GREY To Part No. S30WR10610251	0.0810			Meter	10.00%	5.00%	13365.000	12757.500	12757.500
		WIRE UL106128 STR 7/0.127 PURPLE To Part NO. S30WR10610262	0.0820			Meter	10.00%	5.00%	13530.000	12915.000	12915.000
		WIRE UL106128 STR 7/0.127 YELLOW To Part No. S30WR10610165	0.0830			Meter	10.00%	5.00%	13695.000	13072.500	13072.500
		CONNECTOR GHR-08V-S To Part No. J08CNGHR-08V-S	2.0000			Nos	0.00%<br>Net to Net Basis		300000.000	Net to Net Basis
		TUBE F32(4.0 X 0.25 X 200M)To Part No. S29TB4.0X00016	0.0220			Meter	10.00%	5.00%	3630.000	3465.000	3465.000
		WIRE UL106128 STR 7/0.127 RED To Part No. S30WR10610249	0.0830			Meter	10.00%	5.00%	13695.000	13072.500	13072.500
		TERMINAL SSHL-002T-P0.2 To Part No. J08TMSSHL-0559	16.0000			Nos	0.00%<br>Net to Net Basis		2400000.000	Net to Net Basis
		FERRITE 74270111 To Part No.W004FR74270111	1.0000			Nos	0.00%<br>Net to Net Basis		150000.000	Net to Net Basis
		WIRE UL106128 STR 7/0.127 BLACK To Part No. S30WR10610248	0.0820			Meter	10.00%	5.00%	13530.000	12915.000	12915.000

54/54

W-21/35/2020-IPHW-MeitY

114376/2020/IPHW

WIRE UL106128 STR 7/0.127 GREEN To Part No. S30WR10610163	0.0810	Meter	10.00%	5.00%	13365.000	12757.500	12757.500
WIRE UL106128 STR 7/0.127 BLUE To Part No. S30WR10610166	0.0810	Meter	10.00%	5.00%	13365.000	12757.500	12757.500
WIRE UL106128 STR 7/0.127 ORANGE To Part No.<br>S30WR10610164	0.0810	Meter	10.00%	5.00%	13365.000	12757.500	12757.500
WIRE UL106128 STR 7/0.127 GREY To Part No. S30WR10610251	0.0810	Meter	10.00%	5.00%	13365.000	12757.500	12757.500
WIRE UL106128 STR 7/0.127 PURPLE To Part NO. S30WR10610262	0.0820	Meter	10.00%	5.00%	13530.000	12915.000	12915.000
WIRE UL106128 STR 7/0.127 YELLOW To Part No. S30WR10610165	<br>0.0830	Meter	10.00%	5.00%	13695.000	13072.500	13072.500
CONNECTOR GHR-08V-S To Part No. J08CNGHR-08V-S	2.0000	Nos	0.00%<br>Net to Net Basis		300000.000	Net to Net Basis
TUBE F32(4.0 X 0.25 X 200M)To Part No. S29TB4.0X00016	0.0220	Meter	10.00%	5.00%	3630.000	3465.000	3465.000
WIRE UL106128 STR 7/0.127 RED To Part No. S30WR10610249	0.0830	Meter	10.00%	5.00%	13695.000	13072.500	13072.500
TERMINAL SSHL-002T-P0.2 To Part No. J08TMSSHL-0559	16.0000	Nos	0.00%<br>Net to Net Basis		2400000.000	Net to Net Basis

==> picture [52 x 58] intentionally omitted <==

ISr.	Size & Description Of Cables	Qty	Total Cable
No.		(MTRS)	wt (MT)
1	!copper Conductor XLPE Insulated PVC Sheathed <br>!Armoured CableBelow 1000 V.
1.01	13CoreX25SqMM	10000	13.745
1.02	13CoreX4SqMM	20000	8.274
1.03	~CoreX6SqMM	35000	14.480
1.04	13CoreX16SqMM	3000	3.141
1.05	12CoreX16SqMM	3000	2.657
1.06	13CoreX4SqMM	4000	1.967
2	!copper Conductor XLPE Insulated ZHFR Sheathed <br>!Armoured CableBelow 1000 V.
2.01	13CoreX6Sq.MM	20000	10.175
2.02	~CoreX4Sq.MM	6000	2.477
2.03	3CoreX10Sq.MM	10000	7.787
3	!copper Conductor PVC Insulated Unarmoured Cable <br>Below 1000 V.
3.01	1CoreX1.5SqMM	170000	3.453
3.02	1CoreX2.5SqMM	90000	2.835
3.03	1CoreX10SqMM	1500	0.165
3.04	1CoreX16SqMM	900	0.148
3.05	1CoreX4SqMM	30000	1.383
3.06	1CoreX6SqMM	30000	1.941
4	Copper Conductor PVC Insulated PVC Sheathed <br>Unarmoured Cable Below 1000 V.
4.01	~CoreX2.5SqMM	500	0.127


		500	0.174
4.02	3CoreX4SqMM	1000	0.265
4.03	5CoreX2.5SqMM	500	0.057
4.04	CoreX1.5Sq MM	500	0.086
4.05	3CoreX2.5Sq MM
	Copper Conductor With Earth Continuity Conductor PVC
5	Insulated PVC Sheathed Unarmoured FlatTwin Cable
	Below 1000 V.	1000	0.089
5.01	t2CoreX1.5Sq MM+ E	1000	0.129
5.02	2CoreX2.5SqMM+E
	Tinned Copper Conductor ZHFR Insulated ZHFR Sheathed
6	Unarmoured Solar Cable 1500V.	25000	1.465
6.011CoreX4Sq.MM		25000	1.953
6.021CoreX6Sq.MM		10000	1.200
6.031CoreX10Sq.MM		5000	0.882
6.041CoreX16Sq.MM

==> picture [478 x 34] intentionally omitted <==

==> picture [436 x 35] intentionally omitted <==

==> picture [32 x 19] intentionally omitted <==

==> picture [520 x 240] intentionally omitted <==

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.