IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

DIRECTORATE GENERAL OF FOREIGN TRADE - (DES II SECTION)

MINUTES OF THE NORMS COMMITTEE-II

MEETING No. 08/81-ALC2/2021 DATED 29.09.2020 (Held on 06.10.2020)

Please Note

i. For information of exporters, Norms Committee-II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80 & 85. Communications in respect of cases/pertaining to NC-II may be sent to email address: nc2.dgft@nic.in
ii. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The concerned applicant/company may go through the same and respond accordingly.
iii. Similarly, a scanned copy of the blank Standard Deficiency Format, which may find a reference in NC decisions, has also been attached in the end. This may also be referred to by the concerned applicant/company and may be responded accordingly.
iv. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC.
v. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

e Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

Meeting No. 08/81 of Norms Committee-II for the year 2020-21 (Originally scheduled for 29.09.2020) held on 06.10.2020 through Video Conferencing under the Chairmanship of Shri R. P. Goyal, Additional Director General of Foreign Trade to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2015-20. The following members were present in the meeting:-

Sl. No.	Name & Designation	Department
1.	Shri Indrajeet Yadav, DIA	MoS
2.	Shri Sushil Kumar Jangid, Scientist ‘B’	MeitY
3.	Shri Devendra Kumar Saini, ADG	DoT
4.	Shri Vinay Kumar, AAI	MoS
5.	Shri Shaish Kumar, (TEC-1)	Consultant
6.	Shri V.C. Agarwal, (TEC-3)	Consultant
7.	Shri S. K. Bhatnagar, (SKB)	Consultant
In attendance
1.	Shri Shobhit Gupta, Dy. DGFT	DGFT

i. Draft Minutes of Meeting No. 06/81 scheduled for 11.08.2020 and held on 25.08.2020 were circulated among all the members of the Committee on 24.09.2020. On receipt of comments, the minutes were finalized and uploaded on DGFT’s website on 24.09.2020. Therefore, the minutes are unanimously approved.

Minutes of the cases discussed in the meeting are as under:

1 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

MEETING NUMBER: 8/81-ALC2/2020 MEETING DATE: 29.09.2020

d in the meeting are as under:

1 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

MEETING NUMBER: 8/81-ALC2/2020 MEETING DATE: 29.09.2020

Case No.:35/17/81-	Party Name: R.R.KABEL	Meet No/Date:8/81-	Status:
ALC2/2017	LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310815094
:01/81/050/00345/AM18/	:03/95/040/00815/AM16/	09.08.2017

<br> <br> <br>	Case No.:35/17/81-<br>ALC2/2017<br> <br> <br>HQ File<br>:01/81/050/00345/AM18/<br> <br>	Case No.:35/17/81-<br>ALC2/2017<br> <br> <br>HQ File<br>:01/81/050/00345/AM18/<br> <br>	Party Name: R.R.KABEL<br>LIMITED<br> <br> <br>	Party Name: R.R.KABEL<br>LIMITED<br> <br> <br>	Party Name: R.R.KABEL<br>LIMITED<br> <br> <br>	Party Name: R.R.KABEL<br>LIMITED<br> <br> <br>	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br> <br><br>Lic.No/Date:0310815094<br>09.08.2017	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br> <br><br>Lic.No/Date:0310815094<br>09.08.2017	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br> <br><br>Lic.No/Date:0310815094<br>09.08.2017	Status:<br>Approved
			RLA File<br>:03/95/040/00815/AM16/<br> <br>
1<br> <br> <br> <br> <br>	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per<br>written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

|Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:|||||||||| ||ITCHS Code|Export Item||Quantity|Sl. No.|ITCHS Code||Import Item|Recommended Quantity|| ||85446020|Halogen Free Flame Retardent Cables (Thermosetting) / (Thermoplastic) Upto 1100 voltage Net Content- Copper- 500430KGS, Halogen Free Flame Retardent Compound - 212576.00 KGS, Halogen free Catalyst 11323.50kgs||18000 Kilometer|1|74081190||Copper Wire Rod|1.01 Kgs/Kg content in the exportproduct|| ||||||2|39013000||Halogen Free Flame Retarden Polyolefins based|1.05 Kgs/Kg content in the export product|| ||||||3|39012090||Halogen Free Catalyst Polyolefins based|Upto 1% of FoB value|| ||Note: The words “Polyolefins based” may be added in the description of import items at Sl. No. 2 & 3. RA concerned maytake suitable consequential action accordingly.||||||||||

Case No.:358/14/81-	Party Name: ABB INDIA	Meet No/Date:8/81-	Status:
ALC2/2018	LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710112738	Action by :
:01/81/050/01076/AM19/	:07/24/040/00289/AM18/	24.01.2018	Applicant

C2/2018**||LIMITED||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0710112738||Action by :| |:01/81/050/01076/AM19/||:07/24/040/00289/AM18/||24.01.2018||Applicant|

2 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the applicant on 30.06.2020 followed by a reminder on 16.09.2020. However, no reply has been received yet. Therefore, the Committee decided to grant last opportunity to the applicant for furnishing the requisite information.

The case stands deferred.

3	Case No.:75/5/81-ALC2/2018Party Name: LM WIND<br>POWER BLADES [INDIA]<br>PVT. LTD.<br>Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Status:<br>Deferred<br>HQ File<br>:01/81/050/00283/AM19/<br>RLA File<br>:07/24/040/00342/AM18/<br>Lic.No/Date:0710113376<br>01.06.2018<br>Action by :<br>Applicant<br>Decision:The Committee considered the case as per agenda and Consultant (TEC-1) informed that<br>the applicant’s reply is incomplete due to following reasons:<br>1. In the material balance statement given in annexure- 02 the quantity of import indicated does	Party Name: LM WIND<br>POWER BLADES [INDIA]<br>PVT. LTD.<br>RLA File<br>:07/24/040/00342/AM18/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0710113376<br>01.06.2018	Status:<br>Deferred
				<br>Action by :<br>Applicant

2 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

.2018|Status: Deferred| |---|---|---|---|---| ||||| Action by : Applicant|

2 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

not match with the quantity indicated in the licence.

In annexure- 03 percentage wastage for each item has not been indicated and also import quantity for total blades is to be mentioned.
The import list to be revised to indicate generic name of import along with specific name given in the licence.

Therefore, the Committee decided to ask from the applicant to provide clarification on the above mentioned deficiencies as per comments of Consultant (TEC-1).

Case No.:74/5/81-ALC2/2018	Party Name: LM WIND	Meet No/Date:8/81-	Status:
	POWER BLADES [INDIA]	ALC2/2020	Deferred
	PVT. LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:0710113408	Action by :
:01/81/050/00282/AM19/	:07/24/040/00333/AM18/	07.06.2018	Applicant

4 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 03.02.2020 followed by reminders 17.04.2020, 30.06.2020 & 16.09.2020. The applicant via email dated 16.09.2020 requested for extension of time i.e. 2 to 3 weeks to submit the reply. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the applicant.

il dated 16.09.2020 requested for extension of time i.e. 2 to 3 weeks to submit the reply. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the applicant.

Case No.:143/14/81-	Party Name:	Meet No/Date:8/81-	Status:
ALC2/2018	EMMVEE PHOTOVOLTAIC	ALC2/2020	Deferred
	POWER PVT LTD	29.09.2020
HQ File	RLA File	Lic.No/Date:0710113785	Action by :
:01/81/050/00861/AM19/	:07/24/040/00130/AM19/	30.08.2018	Applicant

5 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 24.12.2019 followed by reminders on 28.02.2020, 13.05.2020 & 06.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the reply of the applicant.

Case No.:8/13/81-ALC2/2018	Party Name: MAN	Meet No/Date:8/81-	Status:
	INDUSTRIES (INDIA) LTD.	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310825719
:01/81/050/00716/AM19/	:03/95/040/00916/AM19/	18.12.2018

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms 6 as per written comments given by Consultant (TEC-3) on the basis of study group report and the applicant’s reply dated 27.12.2019 as under:

Export Items:

The following words may be added in the description of export item “ Coating thickness (i) Epoxy Power-200micron (ii) Adhesive - 150 micron (iii) Polyethylene-3.15 mm”

3 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as 1.05 MT/MT content in the export product.
Quantity of import item at Sl. No. 2 may be allowed 4.00Kg/MT content in the export product .
Quantity of import item at Sl. No. 3 ( Relevant Epoxy Powder ) may be allowed as applied .
Quantity of import item at Sl. No. 4 ( Relevant Adhesive ) may be allowed as 43.00MT.
Quantity of import item at Sl. No. 5 may be allowed as 958.70 MT.
Quantity of import item at Sl. No. 6 may be allowed with value restricted up to 5% of FoB value.

Note: Grade & thickness of steel to match in import & export.

RA concerned may take suitable consequential action accordingly.

Case No.:289/14/81-	Party Name: R R KABEL	Meet No/Date:8/81-	Status:
ALC2/2018	LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310827010	Action by :
:01/81/050/01007/AM19/	:03/95/040/01148/AM19/	13.02.2019	Applicant

Decision: The Committee considered the case as per agenda and Consultant (TEC-3) informed that the applicant’s replies dated 27.01.2020 & 02.09.2020 is deficient due to following reasons:

7 1. The applicant vide letter dated 29.07.2019 informed that they have exported 6950KM in place of 18000KM as per AA and will apply for its amendment. Now, as per letter dated 27.01.2020, they have informed that they did not commit for any amendment of AA.
1. It is mentioned that multi core cables have been exported but product the certification schedule enclosed are for only single core cables.

Therefore, the Committee decided to ask from the applicant to provide clarification on the above mentioned deficiencies as per comments of Consultant (TEC-3).

Case No.:43/2/81-ALC2/2019	Party Name: SEIKODENKI	Meet No/Date:8/81-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0410165215
:01/81/050/01129/AM19/	:04/24/040/00240/AM19/	14.02.2019

|---|---|---|---| |||INDIA PRIVATE LIMITED||ALC2/2020||Rejected| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0410165215||| |:01/81/050/01129/AM19/||:04/24/040/00240/AM19/||14.02.2019|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 8 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 03.01.2020 followed by reminders on 20.04.2020 & 17.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Chennai.

4 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:79/2/81-ALC2/2019	Party Name: BELDEN INDIA	Meet No/Date:8/81-	Status:
	PVT.LTD	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067347
:01/81/050/01165/AM19/	:31/83/040/00188/AM19/	11.03.2019

| |---|---|---|---|---|---|---| |||PVT.LTD||ALC2/2020||Rejected| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:3110067347||| |:01/81/050/01165/AM19/||:31/83/040/00188/AM19/||11.03.2019|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 9 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 03.01.2020 followed by reminders on 20.04.2020, 02.07.2020 & 17.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Pune.

Case No.:74/2/81-ALC2/2019	Party Name: USHA	Meet No/Date:8/81-	Status:
	INDUSTRIAL	ALC2/2020	Deferred
	CORPORATION	29.09.2020
HQ File	RLA File	Lic.No/Date:0810144757	Action by :
:01/81/050/01160/AM19/	:08/24/040/00406/AM19/	12.03.2019	Applicant

10 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 17.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

onsultant (SKB) was sent to the applicant on 17.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:1/2/81-ALC2/2019	Party Name: GRAVITA	Meet No/Date:8/81-	Status:
	INDIA LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:1310049241	Action by :
:01/81/050/00001/AM20/	:13/24/040/00139/AM19/	27.03.2019	Applicant

11 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

Percentage of lead in import supported by Certificate of Analysis.
Manufacturing process with step-wise wastage.

Case No.:16/2/81-ALC2/2019	Party Name: STERLITE	Meet No/Date:8/81-	Status:
	POWER TRANSMISSION	ALC2/2020	Approved
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0310828254
:01/81/050/00016/AM20/	:03/95/040/01250/AM19/	10.04.2019

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/192/2019-TSW dated 02.09.2020 as under:

Net weight of export items at Sl. No. 1, 3 & 7 to 9 may be specified as 60919Kgs, 114143Kgs,

5 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

17633Kgs, 98850Kgs & 111285 Kgs respectively.

7 to 9 may be specified as 60919Kgs, 114143Kgs,

5 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

17633Kgs, 98850Kgs & 111285 Kgs respectively.

Quantity of export items at Sl. No. 2, 4, 5, 6, 10 to 16 may also be specified as 385KM, 2KM, 35KM, 30.21 KM, 285KM, 105KM, 305KM, 65KM, 65KM, 45KM and 450KM respectively in addition to their weight.
Words “ Greased conductor ” may be suffixed with the description of export item as Sl. No. 1.
Description of the import item at Sl. No. 1 may be amended as “Aluminium Ingots/Billets” and quantity of Aluminium Ingots/Billet may be allowed as 1.02Kgs/Kg content in the export item at Sl. No. 1 to 16, as claimed by the firm.
Quantity of import item at Sl. No. 2 i.e. High Carbon Steel Wire/Rod may be allowed as 1.02Kgs/Kg content in the export item at Sl. No. 1, 3 & 7 to 9, taking clue from SIONs C-7 & C-1479.
Quantity of import item at Sl. No. 3 i.e. Zinc may be allowed as 4% weight of steel content in the export item at Sl. No. 1, 3 and 7 to 9, taking clue form SIONs C-7 & C-1479.
Quantity of import item at Sl. No. 4 i.e. overhead Conductor Grease may be allowed upto 2% of FoB value of export item at Sl. No. 1.

No. 1, 3 and 7 to 9, taking clue form SIONs C-7 & C-1479.

Quantity of import item at Sl. No. 4 i.e. overhead Conductor Grease may be allowed upto 2% of FoB value of export item at Sl. No. 1.

13	Case No.:24/3/81-ALC2/2019	Party Name: DIAMOND<br>ENGINEERING (CHENNAI)<br>PVT. LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00044/AM20/	RLA File<br>:04/24/040/00291/AM19/	Lic.No/Date:0410165528<br>30.04.2019
	<br>Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/119/2019-TSW dated 06.08.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/119/2019-TSW dated 06.08.2020. (copy enclosed)

Case No.:2/14/81-ALC2/2019	Party Name: BELDEN INDIA	Meet No/Date:8/81-	Status:
	PVT. LTD.	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067437
:01/81/050/00100/AM20/	:31/83/040/00038/AM20/	03.06.2019

---|---|---|---|---| ||||PVT. LTD.||ALC2/2020||Rejected| ||||||29.09.2020||| ||HQ File||RLA File||Lic.No/Date:3110067437||| ||:01/81/050/00100/AM20/||:31/83/040/00038/AM20/||03.06.2019|||

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 22.01.2020 followed by reminders on 17.04.2020, 17.05.2020 & 16.09.2020. However, no reply has been received yet. Therefore, the Committee decided to reject the case under intimation to RA, Pune. RA concerned may take suitable consequential action accordingly.

15	Case No.:<br>3/14/81-ALC2/2019	Party Name: DEWAN &<br>SONS	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	HQ File<br>:01/81/050/00101/AM20/	<br>RLA File<br>:29/24/040/00007/AM20/	Lic.No/Date:2910025405<br>04.06.2019	Action by :<br>RA/Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the complete set of<br>application has not yet been received from the applicant and also, the applicant’s email address is not<br>available for communication. Therefore, the Committee decided to ask from RA, New Delhi to<br>provide a copy of complete set of application alongwith email address of the applicant.<br>The case stands deferred.

unication. Therefore, the Committee decided to ask from RA, New Delhi to provide a copy of complete set of application alongwith email address of the applicant. The case stands deferred.||||

15 Decision: The Committee considered the case as per the agenda and noted that the complete set of application has not yet been received from the applicant and also, the applicant’s email address is not available for communication. Therefore, the Committee decided to ask from RA, New Delhi to provide a copy of complete set of application alongwith email address of the applicant.

6 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

16	Case No.:7/14/81-ALC2/2019	Party Name: SEIKODENKI<br>INDIA PRIVATE LIMITED<br>RLA File<br>:04/24/040/00056/AM20/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00105/AM20/		Lic.No/Date:0410165686<br>06.06.2019
	<br>Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byMeitYvide U. O. No.: W-21/39/2020-IPHW-MeitY dated 02.09.2020.<br>(copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by MeitY vide U. O. No.: W-21/39/2020-IPHW-MeitY dated 02.09.2020. (copy enclosed)

The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by MeitY vide U. O. No.: W-21/39/2020-IPHW-MeitY dated 02.09.2020. (copy enclosed)

17	Case No.:5/14/81-ALC2/2019	Party Name: VESTAS WIND<br>TECHNOLOGY INDIA<br>PRIVATE LIMITED<br>RLA File<br>:04/24/040/00043/AM20/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00103/AM20/		Lic.No/Date:0410165683<br>06.06.2019
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments dated 06.10.2020 given by Consultant (TEC-1). (copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments dated 06.10.2020 given by Consultant (TEC-1). (copy enclosed)

Case No.:9/14/81-	Party Name: RAM RATNA	Meet No/Date:8/81-	Status:
ALC2/2019	WIRES LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310829473
:01/81/050/00107/AM20/	:03/95/040/00994/AM19/	07.06.2019

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) considering the applicant’s letter dated 12.08.2020 as under:

1 8

mmittee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) considering the applicant’s letter dated 12.08.2020 as under:

1 8

	ITCHS<br>Code	Export Item	Quantity	Sl.<br>No.	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	85441110	Enamelled Copper<br>Strips Net Content:<br>Copper- 24563 Kgs	25000<br>Kgs	1<br>2	74081190<br>32089041	Copper Wire<br>Rod<br>Insulating<br>Varnishes	24810 Kgs<br>Including 1%<br>wastage<br>As applied i.e.<br>0.010 Kg

19	Case No.:19/14/81-<br>ALC2/2019	Party Name: RAJHANS<br>METALS PVT. LIMITED<br>RLA File<br>:24/24/040/00008/AM20/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00117/AM20/		Lic.No/Date:2410042779<br>12.06.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by MSME was sent to the applicant on 17.09.2020. However, no reply<br>has been receivedyet. Therefore,the Committee decided to remind the applicant for furnishingthe

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 17.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the

g certain information as raised by MSME was sent to the applicant on 17.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the

7 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

requisite information.

Case No.:29/14/81-	Party Name: LM WIND	Meet No/Date:8/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:3410045211	Action by :
:01/81/050/00127/AM20/	:34/24/040/00092/AM20/	14.06.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-1):-

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
Sl. No. 5 and 11 of the Standard Deficiency Format.

Case No.:30/14/81-	Party Name: LM WIND	Meet No/Date:8/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:3410045212	Action by :
:01/81/050/00128/AM20/	:34/24/040/00093/AM20/	14.06.2019	Applicant

DES INDIA||ALC2/2020||Deferred| |||PVT. LTD.||29.09.2020||| |HQ File||RLA File||Lic.No/Date:3410045212||Action by :| |:01/81/050/00128/AM20/||:34/24/040/00093/AM20/||14.06.2019||Applicant|

Decision: The Committee considered the case as per the agenda and noted that the copy of application 21 has not yet been received from the applicant and in this regard, an email was sent on 22.11.2019 followed by reminders on 28.02.2020, 14.05.2020 & 17.09.2020. The applicant via email dated 16.09.2020 requested for extension of time i.e. 2 to 3 weeks to submit the all the relevant documents. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application for examination of the case.

Case No.:28/14/81-	Party Name: METALIC	Meet No/Date:8/81-	Status:
ALC2/2019	IMPRESSIONS (INDIA)	ALC2/2020	Approved
	PVT. LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:0510410945
:01/81/050/00126/AM20/	:05/24/040/00153/AM20/	14.06.2019

ALC2/2019*||IMPRESSIONS (INDIA)||ALC2/2020||Approved| |||PVT. LTD.||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0510410945||| |:01/81/050/00126/AM20/||:05/24/040/00153/AM20/||14.06.2019|||

Case No.:28/14/81-<br>ALC2/2019<br> <br> <br> <br>HQ File<br>:01/81/050/00126/AM20/<br> <br>	Case No.:28/14/81-<br>ALC2/2019<br> <br> <br> <br>HQ File<br>:01/81/050/00126/AM20/<br> <br>	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT. LTD.	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT. LTD.	Party Name: METALIC<br>IMPRESSIONS (INDIA)<br>PVT. LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020
		RLA File<br>:05/24/040/00153/AM20/			Lic.No/Date:0510410945<br>14.06.2019
Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>the recommendation of Consultant (TEC-1) as under:
ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code		Import<br>Item	Recommended<br>Quantity
85177090	Mobile Window (3636600 Pcs)<br>Made Out Of Hard Coated<br>Acrylic Sheet Duly Printed &<br>Laminated(0.70To 1.50Mm)		15000<br>Kgs	39162019		Acrylic<br>Sheet	1.05 Kgs/Kg<br>content in the<br>export product
Note:

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on 2 the recommendation of Consultant (TEC-1) as under:

xport product|| ||Note:|||||||||

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on 2 the recommendation of Consultant (TEC-1) as under:

8 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

1. The size of import item should be 1200x1650mm.

2. The import item should be of relevant thickness.

23	Case No.:33/14/81-<br>ALC2/2019	Party Name: DIAMOND<br>METAL SCREENS (P) LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00131/AM20/	RLA File<br>:65/24/040/00001/AM20/	Lic.No/Date:6510000028<br>18.06.2019
	<br>Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/19/2020-TSW dated 04.08.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/19/2020-TSW dated 04.08.2020. (copy enclosed)

Case No.:36/14/81-	Party Name: JAIN METAL	Meet No/Date:8/81-	Status:
ALC2/2019	ROLLING MILLS	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0410165741	Action by :
:01/81/050/00134/AM20/	:04/24/040/00013/AM20/	20.06.2019	MSME

24 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

Recovery of iron & its value supported by documents.

e considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by MSME:

Recovery of iron & its value supported by documents.

Case No.:44/14/81-	Party Name: LM WIND	Meet No/Date:8/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:3410045227	Action by :
:01/81/050/00142/AM20/	:34/24/040/00104/AM20/	24.06.2019	Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application 25 has not yet been received from the applicant and in this regard, an email was sent on 22.11.2019 followed by reminders on 28.02.2020, 14.05.2020 & 17.09.2020. The applicant via email dated 16.09.2020 requested for extension of time i.e. 2 to 3 weeks to submit the all the relevant documents. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application for examination of the case.

26	<br>Case No.:52/14/81-<br>ALC2/2019	Party Name: SHREE CABLES<br>AND CONDUCTORS PVT.<br>LTD.<br> <br>RLA File<br>:11/24/040/00004/AM20/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br> <br><br>Lic.No/Date:1110028604<br>25.06.2019<br> <br>	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00150/AM20/			Action by :<br>TEC-3
	Decision:The Committee	considered the case asper the agenda and noted that a copyof application

| |---|---|---|---|---| || HQ File :01/81/050/00150/AM20/|||Action by : TEC-3| ||**Decision:**The Committee|considered the case asper the agenda and noted that a copyof application|||

Decision: The Committee considered the case as per the agenda and noted that a copy of application

9 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

was sent to Consultant (TEC-3) on 28.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:46/14/81-	Party Name: A-1 FENCE	Meet No/Date:8/81-	Status:
ALC2/2019	PRODUCTS CO. PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310829921	Action by :
:01/81/050/00144/AM20/	:03/94/040/00237/AM20/	26.06.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (SKB):

Weight of each thermoplastic powder coated AKAT30060 panel.

27 2. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material /Consumables.
1. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).
2. Coating weight of zinc on galvanized steel sheets/coils and wire.

ssembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).

Coating weight of zinc on galvanized steel sheets/coils and wire.
What is the coating weight of thermoplastic powder per square meter?
What is the total area of each panel to be coated with thermoplastic powder?
One page writes up on manufacturing process.

	Case No.:51/14/81-	Party Name: STORK FERRO	Meet No/Date:8/81-	Status:
	ALC2/2019	AND MINERAL INDUSTRIES	ALC2/2020	Approved
		PRIVATE LIMITED	29.09.2020
	HQ File	RLA File	Lic.No/Date:0510411068
28	:01/81/050/00149/AM20/	:05/24/040/00184/AM20/	27.06.2019

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments dated 05.10.2020 given by Consultant (SKB). (copy enclosed)

29	Case No.:58/14/81-<br>ALC2/2019	Case No.:58/14/81-<br>ALC2/2019	Party Name: RAJ METAL<br>INDUSTRIES	Party Name: RAJ METAL<br>INDUSTRIES	Party Name: RAJ METAL<br>INDUSTRIES	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00156/AM20/		RLA File<br>:02/24/040/00054/AM20/			Lic.No/Date:0210209298<br>03.07.2019
	<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per comments given by MSME via email dated 05.10.2020 as under:

8 03.07.2019||| || **Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments given by MSME via email dated 05.10.2020 as under:|||||||| ||ITCHS Code|Export Item||Quantity|ITCHS Code|Import Item|Recommended Quantity|| ||78011000|Refined Lead Ingot Purity 99.97%||500 MT|78019920|Remelted Lead Ingot|1.02 Kgs/Kg content in the exportproduct|| ||Note:||||||||

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 29 per comments given by MSME via email dated 05.10.2020 as under:

10 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

1. Lead content in export item is 99.97%.

2. Maximum lead content in import item is 98.86%.

3. The applicant should import relevant item only.

Case No.:60/14/81-	Party Name: TATA POWER	Meet No/Date:8/81-	Status:
ALC2/2019	SOLAR SYSTEMS LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710115133	Action by :
:01/81/050/00158/AM20/	:07/24/040/00065/AM20/	05.07.2019	Applicant

30 Decision: The Committee considered the case as per agenda and Consultant (TEC-3) informed that the applicant’s reply dated 28.09.2020 is deficient due as the applicant has applied for amendment of AA and not submitted copy of amendment sheet yet. Therefore, the Committee decided to ask from the applicant to submit the copy of amendment sheet for examination of the case.

Case No.:65/14/81-	Party Name: DC AUTO	Meet No/Date:8/81-	Status:
ALC2/2019	PARTS PVT. LTD.	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710115147
:01/81/050/00163/AM20/	:07/24/040/00070/AM20/	09.07.2019

-|---|---| |ALC2/2019||PARTS PVT. LTD.||ALC2/2020||Rejected| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0710115147||| |:01/81/050/00163/AM20/||:07/24/040/00070/AM20/||09.07.2019|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 31 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 14.05.2020 & 17.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Bangalore.

Case No.:66/14/81-	Party Name: STANCORP	Meet No/Date:8/81-	Status:
ALC2/2019		ALC2/2020	Rejected
		29.09.2020
HQ File :	RLA File :	Lic.No/Date:0310830212
01/81/050/00164/AM20/	03/95/040/00128/AM20/	10.07.2019

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 32 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 06.07.2020 & 17.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

t been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 06.07.2020 & 17.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

11 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:73/14/81-	Party Name: GUJARAT	Meet No/Date:8/81-	Status:
ALC2/2019	INFRAPIPES PVT. LIMITED	ALC2/2020	Withdrawn
		29.09.2020
HQ File	RLA File	Lic.No/Date:3410045279
:01/81/050/00171/AM20/	:34/24/040/00094/AM20/	11.07.2019

33 Decision: The Committee considered the case as per agenda and noted that the applicant vide email dated 19.09.2020 requested to close the advance licence as export order was cancelled . Therefore, the Committee decided to withdraw the case from the agenda under intimation to RA, Vadodara. (Copy enclosed)

The case is withdrawn.

34	Case No.:72/14/81-<br>ALC2/2019	Party Name: VOESTALPINE<br>VAE VKN INDIA PRIVATE<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0510411242<br>12.07.2019	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00170/AM20/	RLA File<br>:05/24/040/00219/AM20/
	Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments dated 26.09.2020 given by Consultant (SKB) (copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

the agenda and decided to fix the norms as per written comments dated 26.09.2020 given by Consultant (SKB) (copy enclosed) RA concerned maytake suitable consequential action accordingly.||||

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments dated 26.09.2020 given by Consultant (SKB) (copy enclosed)

Case No.:76/14/81-	Party Name: DISHA AUTO	Meet No/Date:8/81-	Status:
ALC2/2019	COMPONENTS PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310830344	Action by :
:01/81/050/00174/AM20/	:03/94/040/00285/AM20/	16.07.2019	Applicant

Decision: The Committee considered the case as per agenda and noted that Consultant (TEC-3) via email dated 27.09.2020 informed that the applicant’s reply dated 14.07.2020 is deficient. Therefore, 35 the Committee decided to seek again from the applicant to furnish the following deficiency as per comment of Consultant (TEC-3):

As per reply letter, there are 12 sizes of export product. Hence, to provide quantity of each export product in numbers & weight.
To provide a legible copy of drawings.

nsultant (TEC-3):

As per reply letter, there are 12 sizes of export product. Hence, to provide quantity of each export product in numbers & weight.
To provide a legible copy of drawings.

36	Case No.:75/14/81-<br>ALC2/2019	Party Name: KINECO<br>KAMAN COMPOSITES -<br>INDIA PVT. LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0310830319<br>16.07.2019	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00173/AM20/	RLA File<br>:03/94/040/00219/AM20/		<br>Action by :<br>DPIIT
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to DPIIT on 23.09.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that the applicant’s reply was sent to DPIIT on 23.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

12 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:77/14/81-	Party Name: LM WIND	Meet No/Date:8/81-	Status:
ALC2/2019	POWER BLADES INDIA	ALC2/2020	Deferred
	PVT. LTD	29.09.2020
HQ File	RLA File	Lic.No/Date:3410045293	Action by :
:01/81/050/00175/AM20/	:34/24/040/00128/AM20/	17.07.2019	Applicant

ADES INDIA||ALC2/2020||Deferred| |||PVT. LTD||29.09.2020||| |HQ File||RLA File||Lic.No/Date:3410045293||Action by :| |:01/81/050/00175/AM20/||:34/24/040/00128/AM20/||17.07.2019||Applicant|

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per advice of Consultant (TEC-1):-

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
Sl. No. 5 and 11 of the Standard Deficiency Format.

Case No.:81/14/81-	Party Name: HORIZON	Meet No/Date:8/81-	Status:
ALC2/2019	CHUTES PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067482	Action by :
:01/81/050/00179/AM20/	:31/83/040/00065/AM20/	23.07.2019	Applicant

Decision: The Committee considered the case as per the agenda and noted that the applicant had 38 obtained one more Advance Authorization No. 3110067480 dated 18.07.2019 with same import & export but with different ITCHS Code. Hence, an email was sent to the applicant to seek clarification in this regard on 06.07.2020 followed by a reminder on 18.09.2020. However, no information has been received yet. Therefore, the Committee decided to grant last opportunity to the applicant to provide clarification on the above said matter.

eminder on 18.09.2020. However, no information has been received yet. Therefore, the Committee decided to grant last opportunity to the applicant to provide clarification on the above said matter.

Case No.:88/14/81-	Party Name: UNIVERSAL	Meet No/Date:8/81-	Status:
ALC2/2019	FLEXIBLES PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710115218	Action by :
:01/81/050/00186/AM20/	:07/24/040/00090/AM20/	26.07.2019	Applicant

39 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by DPIIT vide U. O. No.: P- 47011/115/2020-TSW dated 11.09.2020:

Sl. No. 2, 3, 5 & 11 the Standard Deficiency Format, export product wise.

40	<br>Case No.:89/14/81-<br>ALC2/2019	Party Name: GRUNER<br>INDIA PRIVATE LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Rejected
	HQ File<br>:01/81/050/00187/AM20/	RLA File<br>:05/23/040/00161/AM20/	Lic.No/Date:0510411387<br>29.07.2019

13 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

1/81/050/00187/AM20/|RLA File :05/23/040/00161/AM20/|Lic.No/Date:0510411387 29.07.2019||

13 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Decision: The Committee considered the case as per the agenda and noted that and noted that as per Policy Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 15.05.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, New Delhi.

Case No.:92/14/81-	Party Name: KNEST	Meet No/Date:8/81-	Status:
ALC2/2019	MANUFACTURERS LLP	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067488
:01/81/050/00190/AM20/	:31/82/040/00035/AM20/	31.07.2019

Decision: The Committee considered the case as per the agenda and noted that noted that and noted 41 that as per Policy Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email 22.11.2019 followed by reminders on 28.02.2020, 15.05.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Pune.

e has not been received despite email 22.11.2019 followed by reminders on 28.02.2020, 15.05.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Pune.

Case No.:95/14/81-	Party Name: METAL CARE	Meet No/Date:8/81-	Status:
ALC2/2019	ALLOYS PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0310830743	Action by :
:01/81/050/00193/AM20/	:03/95/040/00400/AM20/	01.08.2019	Applicant

42 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 18.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

43	Case No.:100/14/81-<br>ALC2/2019	Party Name: BHARAT<br>HEAVY ELECTRICALS<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00198/AM20/	RLA File<br>:11/24/040/00006/AM20/	Lic.No/Date:1110028610<br>05.08.2019	<br>Action by :<br>Section
	Decision:The Committee considered the case as per the agenda and decided to refer the<br>for examination & comments as per the advice of Consultant (TEC-1).<br>The case stands deferred.			case to DHI

Decision: The Committee considered the case as per the agenda and decided to refer the case to DHI for examination & comments as per the advice of Consultant (TEC-1).

eferred.|||case to DHI|

Decision: The Committee considered the case as per the agenda and decided to refer the case to DHI for examination & comments as per the advice of Consultant (TEC-1).

14 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

44	Case No.:99/14/81-<br>ALC2/2019	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00197/AM20/	RLA File<br>:03/95/040/00047/AM20/	Lic.No/Date:0310830803<br>05.08.2019
	<br>Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/7/2019-TSW dated 26.08.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Case No.:101/14/81-	Party Name: PRECISION	Meet No/Date:8/81-	Status:
ALC2/2019	METALS	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310830840	Action by :
:01/81/050/00199/AM20/	:03/95/040/00398/AM20/	06.08.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 45 furnish following information as per comments given by Consultant (SKB):

Diameter & quantity of peeled bright Bars to be imported for processing.
Diameter and quantity of stainless steel Bars to be exported after processing (Grinding and polishing).

nt (SKB):

Diameter & quantity of peeled bright Bars to be imported for processing.
Diameter and quantity of stainless steel Bars to be exported after processing (Grinding and polishing).

Case No.:104/14/81-	Party Name: JAIN FGL	Meet No/Date:8/81-	Status:
ALC2/2019	METAL INDUSTRIES	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0410165947
:01/81/050/00202/AM20/	:04/24/040/00062/AM20/	08.08.2019

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments given by MSME via email dated 28.09.2020 as under: 46

ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74031300	Refined Copper Billets<br>Cu. Content More Than<br>99%	2545060<br>Kgs	74040012	Copper scrap<br>Avg. Cu. 98%	1.02 Kgs/Kg<br>content in the<br>exportproduct

47	Case No.:105/14/81-<br>ALC2/2019	Party Name: UKB<br>ELECTRONICS PRIVATE<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00203/AM20/	RLA File<br>:05/24/040/00272/AM20/	Lic.No/Date:0510411476<br>09.08.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 22.11.2019<br>followed bya reminder on 18.09.2020. However,no information has been receivedyet. Hence,the

has not yet been received from the applicant and in this regard, an email was sent on 22.11.2019 followed bya reminder on 18.09.2020. However,no information has been receivedyet. Hence,the||||

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 22.11.2019 followed by a reminder on 18.09.2020. However, no information has been received yet. Hence, the

15 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Committee decided to wait for complete set of application for examination of the case.

Case No.:108/14/81-	Party Name: ANGELS	Meet No/Date:8/81-	Status:
ALC2/2019	ALUMINIUM	ALC2/2020	Deferred
	CORPORATION	29.09.2020
HQ File	RLA File	Lic.No/Date:0310830950	Action by :
:01/81/050/00206/AM20/	:03/94/040/00392/AM20/	13.08.2019	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 48 furnish following information as per comments of Consultant (TEC-3):

Sl. No. 2, 5 & 11 of the Standard Deficiency Format
Copy of Advance Authorisation
Copy of export order

ant to 48 furnish following information as per comments of Consultant (TEC-3):

Sl. No. 2, 5 & 11 of the Standard Deficiency Format
Copy of Advance Authorisation
Copy of export order

49	Case No.:111/14/81-<br>ALC2/2019	Party Name: PARAM<br>INDUSTRIES	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00209/AM20/	RLA File<br>:03/95/040/00512/AM20/	Lic.No/Date:0310831052<br>19.08.2019	<br>Action by :<br>MSME
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to MSME on 28.09.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that the applicant’s reply was sent to MSME on 28.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:112/14/81-	Party Name: PARAM	Meet No/Date:8/81-	Status:
ALC2/2019	INDUSTRIES	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310831055
:01/81/050/00210/AM20/	:03/95/040/00511/AM20/	19.08.2019

--|---|---|---| |ALC2/2019||INDUSTRIES||ALC2/2020||Approved| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310831055||| |:01/81/050/00210/AM20/||:03/95/040/00511/AM20/||19.08.2019|||

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments given by MSME via email dated 28.09.2020 with the condition that the applicant only imports secondary sheets/coils and export consist of SS perforated strips with perforated Pattern No. SSPS/PI-02 as under :

	ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	73182990	Stainless Steel semi<br>finished perforated strips<br>Grade 304 / 316 / 410 /<br>201 / 409 / 430 (net<br>content of Stainless Steel<br>Secondary Sheet / Coils<br>(32 MT)	32 MT	72199090	Stainless Steel<br>Secondary<br>Sheet / Coils<br>Grade 304 /<br>316 / 410 /<br>201 / 409 /<br>430of same<br>thickness	2.55 Kgs/Kg<br>content in the<br>export product<br>after taking<br>0.776Kg/Kg<br>recovery (1/3rd)<br>from scrap

16 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

ent in the export product after taking 0.776Kg/Kg recovery (1/3rd) from scrap|

16 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

51	Case No.:115/14/81-<br>ALC2/2019	Party Name: AIRMASTER<br>TAPE INDUSTRIES<br>PRIVATE LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00213/AM20/	RLA File<br>:04/24/040/00086/AM20/	Lic.No/Date:0410165978<br>20.08.2019
	<br>Decision:The Committee considered the case as per the agenda and decided to fix the norms as per<br>written comments given byDPIITvide U. O. No.: P-47011/126/2020-TSW dated 29.09.2020. (copy<br>enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/126/2020-TSW dated 29.09.2020. (copy enclosed)

Case No.:117/14/81-	Party Name: MJM FINE	Meet No/Date:8/81-	Status:
ALC2/2019	ENCLOSURES PRIVATE	ALC2/2020	Rejected
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0710115311
:01/81/050/00215/AM20/	:07/24/040/00116/AM20/	21.08.2019

|ALC2/2019||ENCLOSURES PRIVATE||ALC2/2020||Rejected| |||LIMITED||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0710115311||| |:01/81/050/00215/AM20/||:07/24/040/00116/AM20/||21.08.2019|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 52 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 16.05.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Bangalore.

Case No.:118/14/81-	Party Name: TECHNO COAT	Meet No/Date:8/81-	Status:
ALC2/2019	SYSTEMS (INDIA)	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0810146018
:01/81/050/00216/AM20/	:08/24/040/00162/AM20/	21.08.2019

53 Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 07.07.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Ahmedabad.

een received despite email dated 22.11.2019 followed by reminders on 28.02.2020, 07.07.2020 & 18.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Ahmedabad.

54	Case No.:125/14/81-<br>ALC2/2019	Party Name: WAAREE<br>ENERGIES LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Rejected
	<br>HQ File<br>:01/81/050/00223/AM20/	RLA File<br>:52/24/040/00027/AM20/	Lic.No/Date:5210043159<br>26.08.2019
	<br>Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised by Consultant (TEC-3) was sent to the applicant on 15.04.2020 followed<br>by reminders on 17.05.2020 & 18.09.2020. However, no reply has been received yet. Therefore, the<br>Committee decided torejectthe case under intimation to RA, Surat.<br>RA concerned maytake suitable consequential action accordingly.

17 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:126/14/81-	Party Name: GANGES	Meet No/Date:8/81-	Status:
ALC2/2019	INTERNATIONALE (P)	ALC2/2020	Deferred
	LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166014	Action by :
:01/81/050/00224/AM20/	:04/24/040/00090/AM20/	28.08.2019	Applicant

RNATIONALE (P)||ALC2/2020||Deferred| |||LTD.||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0410166014||Action by :| |:01/81/050/00224/AM20/||:04/24/040/00090/AM20/||28.08.2019||Applicant|

55 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 18.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:132/14/81-	Party Name: JAIN FGL	Meet No/Date:8/81-	Status:
ALC2/2019	METAL INDUSTRIES	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510411714	Action by :
:01/81/050/00230/AM20/	:05/23/040/00546/AM19/	02.09.2019	Applicant

56 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per advice of MSME:

To provide clarification for Sl. No. 2 of item of export as to why the net quantity of copper in export is greater than import.

Case No.:134/14/81-	Party Name: NUEVOSOL	Meet No/Date:8/81-	Status:
ALC2/2019	ENERGY PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0910067962	Action by :
:01/81/050/00232/AM20/	:09/24/040/00257/AM20/	03.09.2019	Applicant

||ENERGY PVT. LTD.||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0910067962||Action by :| |:01/81/050/00232/AM20/||:09/24/040/00257/AM20/||03.09.2019||Applicant|

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (SKB):

57 1. Weight of each assembly of flash kit mill.
1. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares, Raw Material /Consumables.
2. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).
3. What is the thickness and width of aluminum coil?
4. Brief writes up on manufacturing process

Case No.:135/14/81- Party Name: NUEVOSOL Meet No/Date:8/81- Status: ALC2/2019 ENERGY PVT. LTD. ALC2/2020 Deferred 58 29.09.2020 HQ File RLA File Lic.No/Date:0910067963 Action by :

18 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

:01/81/050/00233/AM20/ :09/24/040/00256/AM20/ 03.09.2019 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (SKB):

Weight of each assembly of flash kit mill.
Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares, Raw Material /Consumables.

ght of each assembly of flash kit mill.

Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares, Raw Material /Consumables.
Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).
What is the thickness and width of aluminum coil?
Brief writes up on manufacturing process

Case No.:138/14/81-	Party Name: JINDAL SAW	Meet No/Date:8/81-	Status:
ALC2/2019	LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510411774
:01/81/050/00236/AM20/	:05/23/040/00221/AM20/	06.09.2019

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) considering reply dated 10.07.2020 as under:

Export Items:

The following words may be added in the description of export item “ Coating thickness (a) Epoxy 250 micron (b) Adhesive 300 micron (c) Polypropylene & corresponding surface area to be coated (i) 16963.534 Sq. mtr. for 1950 micron (ii) 27973.875 Sq. mtr. for 2450 micron ”

59 Import Items:

Quantity of import item at Sl. No. 1 may be allowed as applied and value restricted up to 0.5% of FoB value .
Quantity of import item at Sl. No. 2 ( Relevant Epoxy Powder ) may be allowed as 19.21MT .
Quantity of import item at Sl. No. 3 ( Relevant Adhesive ) may be allowed as 14.00MT .
Quantity of import item at Sl. No. 4 ( Relevant Polypropylene ) may be allowed as 111.50 MT
Quantity of import item at Sl. No. 5 ( Relevant Sintered powder ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 6 ( Relevant Wiremesh ) may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 7 ( OPC Cement ) may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 8 may be allowed as per GN-4.

60	Case No.:140/14/81-<br>ALC2/2019	Party Name: WELSPUN<br>CORP LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00238/AM20/	RLA File<br>:34/24/040/00166/AM20/	Lic.No/Date:3410045427<br>09.09.2019
	Decision:The Committee considered the case as per the agenda and decided tofixthe ad-hoc norms<br>asper written commentsgiven byConsultant(TEC-3)consideringreplydated 26.06.2020 as under:

ecision:The Committee considered the case as per the agenda and decided tofix**the ad-hoc norms asper written commentsgiven byConsultant(TEC-3)consideringreplydated 26.06.2020 as under:||||

19 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Export Items:

The following words may be added in the description of export item “ Coating thickness 900 micron and Surface area to be coated-4765.27 Sq. Mtr ”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as 946.37 MT .
Quantity of import item at Sl. No. 2 may be allowed as 3680.00 Kgs .
Quantity of import item at Sl. No. 3 ( Epoxy spray paint 100% solid ) may be allowed as 7505 Litre .
Quantity of import item at Sl. No. 1 may be allowed as applied and value up to 5% of FoB value.

Case No.:150/14/81-	Party Name: WELSPUN	Meet No/Date:8/81-	Status:
ALC2/2019	CORP LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3410045461
:01/81/050/00248/AM20/	:34/24/040/00165/AM20/	19.09.2019

61 Decision: The Committee considered the case as per the agenda and noted that the applicant’s reply was sent to Consultant (TEC-3) on 15.07.2020 & 21.07.2020 for examination of the case. However, Consultant (TEC-3) via email dated 26.07.2020 requested to send physical file along with the applicant’s reply. Therefore, the Committee decided to send the same to Consultant (TEC-3) for examination of the case.

Case No.:169/14/81-	Party Name: DISHA AUTO	Meet No/Date:8/81-	Status:
ALC2/2019	COMPONENTS PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310831977	Action by :
:01/81/050/00267/AM20/	:03/94/040/00513/AM20/	03.10.2019	Section

COMPONENTS PVT. LTD.||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310831977||Action by :| |:01/81/050/00267/AM20/||:03/94/040/00513/AM20/||03.10.2019||Section|

62 Decision: The Committee considered the case as per agenda and noted the comments given by MSME via email dated 17.08.2020. However, the matter was deliberated in the meeting and the Committee decided to have a second opinion. Hence, it was decided to refer the case to Consultant (TEC-3) for comments.

Case No.:14/8/81-ALC2/2020	Party Name: OLECTRA<br>GREENTECH LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
<br>HQ File<br>:01/81/050/00715/AM21/	RLA File<br>:09/24/040/00348/AM20/	Lic.No/Date:0910068073<br>10.10.2019	<br>Action by :<br>Applicant
Decision:The Committee considered the case as per agenda and decided to seek from the applicant to
furnish following information as per comments of Consultant (TEC-1):
1. Complete set of application along with all technical information as per appendix- 4E.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of Consultant (TEC-1):

20 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Nett weight of Silicone Rubber compound in each of export product.
Details of indigenous input along with their quantity required to manufacture Silicone Rubber compound for each export product.

tt weight of Silicone Rubber compound in each of export product.

Details of indigenous input along with their quantity required to manufacture Silicone Rubber compound for each export product.
Details of wastage claimed for each import item with justification.

Case No.:1/20/81-ALC2/2019 Party Name: NORDEX Meet No/Date:8/81- Status: INDIA PRIVATE LIMITED ALC2/2020 Deferred 29.09.2020 HQ File RLA File Lic.No/Date:0710115856 Action by : :01/81/050/00353/AM20/ :07/24/040/00216/AM20/ 13.12.2019 Applicant

64 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 18.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:3/20/81-	Party Name: ENGINEERS	Meet No/Date:8/81-	Status:
ALC2/2019	INDIA	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510412919
:01/81/050/00355/AM20/	:05/23/040/00341/AM20/	16.12.2019

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (SKB) via email dated 26.09.2020 as under: 65

ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
74081190	Bare Copper<br>Wire	225 MT	74071010	Copper CC<br>Rods	1.01 Kgs/Kg content in<br>the exportproduct

Note: The import & export items should contain minimum 99% Copper.

Case No.:7/20/81-ALC2/2019	Party Name: PHOENIX	Meet No/Date:8/81-	Status:
	INDUSTRIES PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310833457	Action by :
:01/81/050/00359/AM20/	:03/95/040/00081/AM20/	17.12.2019	Applicant

66 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 18.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

21 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

efore, the Committee decided to remind the applicant for furnishing the requisite information.

21 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:6/20/81-ALC2/2019	Party Name: TECHNO TRAK	Meet No/Date:8/81-	Status:
	ENGINEERS	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067630	Action by :
:01/81/050/00358/AM20/	:31/83/040/00126/AM20/	17.12.2019	Applicant

67 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 08.07.2020 followed by a reminder on 18.09.2020. However, no reply has been received yet. Therefore, the Committee decided to grant last opportunity to the applicant for furnishing the requisite information.

68	Case No.:8/20/81-ALC2/2019	Party Name: RATNAVEER<br>METALS LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00360/AM20/	RLA File<br>:34/24/040/00281/AM20/	Lic.No/Date:3410045719<br>18.12.2019	<br>Action by :<br>TEC-3
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

onsultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.||||

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:10/20/81-	Party Name: RAJ METAL	Meet No/Date:8/81-	Status:
ALC2/2019	INDUSTRIES	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0210209634
:01/81/050/00362/AM20/	:02/24/040/00142/AM20/	20.12.2019

	Case No.:10/20/81-<br>ALC2/2019	Case No.:10/20/81-<br>ALC2/2019	Party Name: RAJ METAL<br>INDUSTRIES	Party Name: RAJ METAL<br>INDUSTRIES	Party Name: RAJ METAL<br>INDUSTRIES	Party Name: RAJ METAL<br>INDUSTRIES	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	HQ File<br>:01/81/050/00362/AM20/		RLA File<br>:02/24/040/00142/AM20/				Lic.No/Date:0210209634<br>20.12.2019

br>29.09.2020|Status: Approved| |---|---|---|---|---|---|---|---|---|---| ||HQ File :01/81/050/00362/AM20/||RLA File :02/24/040/00142/AM20/||||Lic.No/Date:0210209634 20.12.2019||| |69| **Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments given by MSME via email dated 05.10.2020 as under: ITCHS Code Export Item Quantity ITCHS Code Import Item Recommended Quantity 78011000 Refined Lead Ingot Purity 99.97% 1000 MT 78019920 Remelted Lead Ingot 1.02 Kgs/Kg content in the exportproduct Note: 1. Percentage of lead in export item is 99.97%. 2. Maximum percentage of lead in import item is 98.46%. 3. The applicant should import relevant item only. RA concerned maytake suitable consequential action accordingly.||||||||| |||Export Item||Quantity|ITCHS Code|Import Item||Recommended Quantity|| |||Refined Lead Ingot Purity 99.97%||1000 MT|78019920|Remelted Lead Ingot||1.02 Kgs/Kg content in the exportproduct|| |||||||||||

tity|ITCHS Code|Import Item||Recommended Quantity|| |||Refined Lead Ingot Purity 99.97%||1000 MT|78019920|Remelted Lead Ingot||1.02 Kgs/Kg content in the exportproduct|| |||||||||||

70	Case No.:11/20/81-<br>ALC2/2019	Party Name: RAJ METAL<br>INDUSTRIES	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00363/AM20/	RLA File<br>:02/24/040/00143/AM20/	Lic.No/Date:0210209635<br>20.12.2019	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised byMSME was sent to the applicant on 18.09.2020. However,no reply

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 18.09.2020. However, no reply

22 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:13/20/81-	Party Name: JAY BHAWANI	Meet No/Date:8/81-	Status:
ALC2/2019	METAL INDUSTRIES	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310833602	Action by :
:01/81/050/00365/AM20/	:03/94/040/00765/AM20/	23.12.2019	Applicant

||METAL INDUSTRIES||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310833602||Action by :| |:01/81/050/00365/AM20/||:03/94/040/00765/AM20/||23.12.2019||Applicant|

71 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 22.09.2020 for examination of the case. However, DPIIT informed vide U. O. No. P-47011/242/2019 dated 05.10.2020 that they have received application of different AA. Further, it was noted that the correct copy of application is not available. Therefore, the Committee decided to ask from the applicant to submit the complete set of application for examination of the case.

Case No.:17/20/81-	Party Name:	Meet No/Date:8/81-	Status:
ALC2/2019	MAHARASHTRA	ALC2/2020	Approved
	SEAMLESS LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0510413061
:01/81/050/00369/AM20/	:05/24/040/00591/AM20/	24.12.2019

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) on the basis of study group report considering the applicant’s reply dated 05.08.2020 as under:

Export Items:

The following words may be added in the description of export item at Sl. No. 1 “Coating thickness (i)Epoxy Power-150micron (ii) Adhesive - 200 micron (iii) Polyethylene-1.65 mm and total surface area to be coated - 89437 Sq. Mtr”

Import Items:

Quantity of import item at Sl. No. 1 may be allowed as 1.05 MT/MT content in the export product at Sl. No. 1.
Quantity of import item at Sl. No. 2 ( Relevant Epoxy Powder ) may be allowed as applied for . 3. Quantity of import item at Sl. No. 3 ( Relevant Adhesive ) may be allowed as 20302 Kgs .
Quantity of import item at Sl. No. 4 may be allowed as 161930 Kgs .
Quantity of import item at Sl. No. 5 may be allowed as applied and value restricted up to 1% of FoB value of export item at Sl. No. 1.
Quantity of import item at Sl. No. 6 may be allowed as 1.05 MT/MT content in the export product at Sl. No. 2 & 3.

Note: Grade & thickness of steel to match in import & export.

23 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

73	Case No.:16/20/81-<br>ALC2/2019	Party Name: PRECISION<br>METALS	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status: Deferred
	<br>HQ File<br>:01/81/050/00368/AM20/	RLA File<br>:03/95/040/00918/AM20/	<br>Lic.No/Date:0310833650<br>24.12.2019	Action by :<br>Consultant(SKB)
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply has<br>been forwarded to Consultant (SKB) on 06.10.2020 for examination of the case. Therefore, the<br>Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that the applicant’s reply has been forwarded to Consultant (SKB) on 06.10.2020 for examination of the case. Therefore, the Committee decided to wait for the comments.

Case No.:22/20/81-	Party Name: UPR	Meet No/Date:8/81-	Status:
ALC2/2019	ENGINEERING PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0310833737	Action by :
:01/81/050/00374/AM20/	:03/95/040/00946/AM20/	27.12.2019	Section

ERING PRIVATE||ALC2/2020||Deferred| |||LIMITED||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310833737||Action by :| |:01/81/050/00374/AM20/||:03/95/040/00946/AM20/||27.12.2019||Section|

74 Decision: The Committee considered the case as per agenda and noted the comments given by MSME via email dated 25.09.2020. However, the matter was deliberated in the meeting and the Committee decided to have a second opinion. Hence, it was decided to refer the case to Consultant (TEC-3) for comments.

Case No.:15/8/81-ALC2/2020	Party Name: TOSHIBA	Meet No/Date:8/81-	Status:
	TRANSMISSION &	ALC2/2020	Deferred
	DISTRIBUTION SYSTEMS	29.09.2020
HQ File	RLA File	Lic.No/Date:0910068356	Action by :
:01/81/050/00716/AM21/	:09/24/040/00501/AM20/	09.01.2020	Applicant

75 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 25.09.2020 for examination of the case. However, Consultant (TEC-3) asked to send hard copy of the application to examine the case. Further, it was noted that the hard copy of application is not available. Therefore, the Committee decided to seek from the applicant to submit hard copy of the application.

n to examine the case. Further, it was noted that the hard copy of application is not available. Therefore, the Committee decided to seek from the applicant to submit hard copy of the application.

76	Case No.:1/23/81-ALC2/2019	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00413/AM20/	RLA File<br>:09/24/040/00513/AM20/	Lic.No/Date:0910068405<br>23.01.2020	<br>Action by :<br>DHI
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to DHI on 28.09.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that the applicant’s reply was sent to DHI on 28.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

24 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:7/23/81-	Party Name: ENGINEERS	Meet No/Date:8/81-	Status:
ALC2/2019	INDIA	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510413444
:01/81/050/00419/AM20/	:05/23/040/00399/AM20/	24.01.2020

--|---|---|---| |ALC2/2019||INDIA||ALC2/2020||Approved| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0510413444||| |:01/81/050/00419/AM20/||:05/23/040/00399/AM20/||24.01.2020|||

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (SKB) via email dated 26.09.2020 as under:

ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item
74081190	Bare Copper<br>Wire Purity<br>99.99%	225 MT	74071010	Copper CC<br>Rods (Purity<br>99.99%)

Case No.:6/23/81-ALC2/2019	Party Name: SAFEBARRIER	Meet No/Date:8/81-	Status:
	INTERNATIONAL	ALC2/2020	Approved
	PRIVATE LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0310834468
:01/81/050/00418/AM20/	:03/95/040/01040/AM20/	24.01.2020

Decision: The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/81/2020-TSW dated 29.09.2020. (copy enclosed)

** The Committee considered the case as per the agenda and decided to fix the norms as per written comments given by DPIIT vide U. O. No.: P-47011/81/2020-TSW dated 29.09.2020. (copy enclosed)

79	Case No.:4/23/81-ALC2/2019	Party Name: UNIVERSAL<br>HEAT EXCHANGERS<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00416/AM20/	RLA File<br>:32/21/040/00209/AM20/	Lic.No/Date:3210079361<br>24.01.2020	Action by :<br>DPIIT
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to DPIIT on 05.10.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 05.10.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

and noted that a copy of application was sent to DPIIT on 05.10.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:9/23/81-<br>ALC2/2019	Case No.:9/23/81-<br>ALC2/2019	Party Name: AXORA<br>RESOURCES LIMITED	Party Name: AXORA<br>RESOURCES LIMITED	Party Name: AXORA<br>RESOURCES LIMITED	Party Name: AXORA<br>RESOURCES LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020
HQ File<br>:01/81/050/00421/AM20/		RLA File<br>:02/24/040/00173/AM20/				Lic.No/Date:0210209724<br>28.01.2020
<br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per comments given by MSME via email dated 28.09.2020 as under:
ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item		Recommended Quantity
78011000	Lead Ingot Purity		500 MT	78019920	Remelted		1.02 MT/MT net content

25 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

99.97% & Above

Lead Ingot in the export product

1. Maximum percentage of lead in import item is 98%.

2. The applicant should import relevant items only.

Case No.:10/23/81-	Party Name: SHIVALIK	Meet No/Date:8/81-	Status:
ALC2/2019	BIMETAL CONTROLS LTD	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510413468	Action by :
:01/81/050/00422/AM20/	:05/24/040/00691/AM20/	29.01.2020	Applicant

81 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 21.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:11/23/81-	Party Name: SHIVALIK	Meet No/Date:8/81-	Status:
ALC2/2019	BIMETAL CONTROLS LTD	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510413469	Action by :
:01/81/050/00423/AM20/	:05/24/040/00692/AM20/	29.01.2020	Applicant

82 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the applicant on 21.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

sultant (TEC-3) was sent to the applicant on 21.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:14/23/81-	Party Name: MICROMAX	Meet No/Date:8/81-	Status:
ALC2/2019	INFORMATICS LIMITED	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510413524
:01/81/050/00426/AM20/	:05/24/040/00704/AM20/	04.02.2020

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 83 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 26.02.2020 followed by reminders on 17.05.2020 & 21.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, New Delhi.

26 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:13/23/81-	Party Name: PEARL	Meet No/Date:8/81-	Status:
ALC2/2019	INSULATIONS PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0710116093	Action by :
:01/81/050/00425/AM20/	:07/24/040/00258/AM20/	04.02.2020	Section

TIONS PRIVATE||ALC2/2020||Deferred| |||LIMITED||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0710116093||Action by :| |:01/81/050/00425/AM20/||:07/24/040/00258/AM20/||04.02.2020||Section|

84 Decision: The Committee considered the case as per the agenda and noted that the comments for import item at Sl. No. 1 have been received from Consultant (TEC-3) via email dated 05.10.2020. On the advice of Consultant (TEC-3), the Committee decided to refer the case to Consultant (TEC-1) for comments on rest of the items.

Case No.:15/23/81-	Party Name: POLYCAB	Meet No/Date:8/81-	Status:
ALC2/2019	INDIA LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310834702
:01/81/050/00427/AM20/	:03/95/040/01061/AM20/	07.02.2020

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 3 to 8, 11 to 17, 19 & 20 may be allowed as 1.05 Kgs/Kg

85 content in the export product.

Quantity of import items at Sl. No. 9 & 18 may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 10 may be allowed as 4 % of steel to be galvanized.
Quantity of import items at Sl. No. 21 & 22 may be allowed as per packing policy.

Note:

1. Sizes and weight as given with application may be incorporated in the description of the export item.

2. Grade of steel to match in import & export.

86	Case No.:16/23/81-<br>ALC2/2019	Party Name: BAOSTEEL<br>INDIA COMPANY<br>PRIVATE LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00428/AM20/	RLA File<br>:03/94/040/00937/AM20/	Lic.No/Date:0310834749<br>10.02.2020
	Decision:The Committee considered the case as per the agenda and decided to fix the ad-hoc norms<br>as per written comments dated 05.10.2020 given by Consultant (SKB). (copy enclosed)<br>RA concerned maytake suitable consequential action accordingly.

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments dated 05.10.2020 given by Consultant (SKB). (copy enclosed)

27 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:18/23/81-	Party Name: APAR	Meet No/Date:8/81-	Status:
ALC2/2019	INDUSTRIES LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310834830	Action by :
:01/81/050/00430/AM20/	:03/94/040/00938/AM20/	13.02.2020	Applicant

INDUSTRIES LIMITED||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310834830||Action by :| |:01/81/050/00430/AM20/||:03/94/040/00938/AM20/||13.02.2020||Applicant|

Decision: The Committee considered the case as per agenda and noted the comments given by DPIIT vide U. O. No.: P-47011/107/2019-TSW dated 10.08.2020. However, the matter was deliberated in the meeting and the Committee decided to seek from the applicant to furnish following information as 87 per advice of Consultant (TEC-3):

Calculation for quantity asked for import of item No. 2.
Use of import item at Sl. No. 3, when export item is a cable.
Uses of import item at Sl. No. 4 in manufacture of export item as cables are normally packed on drums.
Details of indigenous inputs.

Case No.:19/23/81-	Party Name: MITTAL COIN	Meet No/Date:8/81-	Status:
ALC2/2019	PRIVATE LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:5610005822
:01/81/050/00431/AM20/	:56/24/040/00036/AM20/	13.02.2020

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 26.09.2020 given by Consultant (SKB) as under:

|13.02.2020|||

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 26.09.2020 given by Consultant (SKB) as under:

ITCHS<br>Code	Export<br>Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	Refined			Copper Scrap Druidas per	1.03Kgs/Kg of
74031300	Copper	287 MT	74040012	ISRI (Copper content in the	copper content in
	Billets			range of 38% to 43%)	the exportproduct

Note: The export item should contain minimum 99% copper.

Case No.:16/8/81-ALC2/2020	Party Name: NAVGRAH	Meet No/Date:8/81-	Status:
	FASTNERS PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:5210043332	Action by :
:01/81/050/00717/AM21/	:52/24/040/00070/AM20/	14.02.2020	Applicant

89 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

28 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

the Committee decided to remind the applicant for submitting the complete set of application.

28 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:25/23/81-	Party Name: TATA	Meet No/Date:8/81-	Status:
ALC2/2019	INTERNATIONAL	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0210209776	Action by :
:01/81/050/00437/AM20/	:02/24/040/00187/AM20/	19.02.2020	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish the following information as per comments of Consultant (SKB):

What is the total weight of each Rectangular Hot Rolled Bars along with Copper insert collector Bar?
How many numbers of rectangular bars are being exported in 850 MT weight?

90 3. Indicated wastage of copper rod as 10% at one place (Sl. No. 14: Detail of wastage) and 1% at other pace (Appendix 4E) in the application. Hence, furnish reasons thereof.
1. Indicated weight of export of copper insert collector bars as 9350 MT. However, in the description of export item is 935 MT and 944 MT in item of import. Please indicate which quantity is correct?

Indicated weight of export of copper insert collector bars as 9350 MT. However, in the description of export item is 935 MT and 944 MT in item of import. Please indicate which quantity is correct?

As per process flow chart, it is indicated that Non-Alloy Steel Slab is entered from of import as well as from domestic for manufacturing of Hot Rolled Bars/Machined Collector Bars. In this regard, kindly let us know the requirement of imported and domestic non alloy steel slab separately for manufacturing of the aforesaid export product. Since domestic slabs are available, then the reason for using imported slabs. Is the quality and specifications being different than domestic procurement?

Case No.:24/23/81-	Party Name: TECHNO TRAK	Meet No/Date:8/81-	Status:
ALC2/2019	ENGINEERS	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067691	Action by :
:01/81/050/00436/AM20/	:31/83/040/00156/AM20/	19.02.2020	Applicant

91 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the applicant on 21.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

raised by DPIIT was sent to the applicant on 21.09.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:17/8/81-ALC2/2020	Party Name: NU-CORK	Meet No/Date:8/81-	Status:
	PRODUCTS(P) LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510413767	Action by :
:01/81/050/00718/AM21/	:05/24/040/00743/AM20/	02.03.2020	Applicant

92 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

29 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:1/2/81-ALC2/2020	Party Name: POLYCAB	Meet No/Date:8/81-	Status:
	INDIA LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835466
:01/81/050/00481/AM20/	:03/95/040/01187/AM20/	17.03.2020

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.

per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 3 to 8 & 11 to 21 may be allowed as 1.05 Kgs/Kg content

93 in the export product.

Quantity of import item at Sl. No. 9 may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 10 may be allowed as 4 % of steel to be galvanized. 5. Quantity of import items at Sl. No. 22 & 23 may be allowed as per packing policy.

Note:

1. Sizes and weight as given with application may be incorporated in the description of the export item.

2. Grade of steel to match in import & export.

Case No.:2/2/81-ALC2/2020	Party Name: POLYCAB	Meet No/Date:8/81-	Status:
	INDIA LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835490
:01/81/050/00482/AM20/	:03/95/040/01202/AM20/	18.03.2020

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 3 to 7 & 10 to 19 may be allowed as 1.05 Kgs/Kg content

94 in the export product.

Quantity of import items at Sl. No. 8 may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 9 may be allowed as 4 % of steel to be galvanized.
Quantity of import items at Sl. No. 20 & 21 may be allowed as per packing policy.

Note:

1. Sizes and weight as given with application may be incorporated in the description of the export item.

2. Grade of steel to match in import & export.

30 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:3/2/81-ALC2/2020	Party Name: ARMOR PLAST	Meet No/Date:8/81-	Status:
	LIMITED	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710116277
:01/81/050/00483/AM20/	:07/24/040/00309/AM20/	18.03.2020

Decision: The Committee considered the case as per the agenda and noted that as per Policy Circular 95 No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 30.04.2020 followed by reminders on 17.05.2020 & 21.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Bangalore.

me has not been received despite email dated 30.04.2020 followed by reminders on 17.05.2020 & 21.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Bangalore.

96	Case No.:4/2/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS<br>RLA File<br>:09/24/040/00627/AM20/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00484/AM20/		Lic.No/Date:0910068597<br>20.03.2020	Action by :<br>DHI
	<br>Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to DHI on 10.08.2020 for examination of the case. However, no comments have been received<br>yet. Therefore, the Committee decided to remind DHI for expediting the comments.<br>The case stands deferred.

Case No.:6/2/81-ALC2/2020	Party Name: HINDALCO	Meet No/Date:8/81-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0210209838
:01/81/050/00486/AM20/	:02/24/040/00205/AM20/	23.03.2020

---|---|---|---|---| |||INDUSTRIES LIMITED||ALC2/2020||Approved| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0210209838||| |:01/81/050/00486/AM20/||:02/24/040/00205/AM20/||23.03.2020|||

	Case No.:6/2/81-ALC2/2020	Case No.:6/2/81-ALC2/2020	Party Name: HINDALCO<br>INDUSTRIES LIMITED	Party Name: HINDALCO<br>INDUSTRIES LIMITED	Party Name: HINDALCO<br>INDUSTRIES LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0210209838<br>23.03.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0210209838<br>23.03.2020
	HQ File<br>:01/81/050/00486/AM20/		RLA File<br>:02/24/040/00205/AM20/
9<br>7	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by Consultant (TEC-3) vide email dated 27.09.2020 as under:
	ITCHS<br>Code	Export Item		Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	74031100	Continuous cast<br>copper rod / Copper<br>Wire Rod		4887.255<br>MT	74020090	Copper Anode -<br>99.2% to 99.7% of<br>CopperContent	4937.00 MT<br>including 1%<br>wastage
	Note: The word “Cathode” may be deleted from the description of export item.<br>RA concerned maytake suitable consequential action accordingly.

937.00 MT including 1% wastage|| ||Note: The word “Cathode” may be deleted from the description of export item. RA concerned maytake suitable consequential action accordingly.||||||||

98	Case No.:8/2/81-<br>ALC2/2020<br> <br>	Party Name: WORTHY<br>ENGINEERING	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Approved
	<br>HQ File<br>:01/81/050/00488/AM21/<br> <br>	RLA File<br>:07/24/040/00318/AM20/	Lic.No/Date:0710116312<br>31.03.2020
	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>repeat basis as approved for AA No. 0710115198 dated 23.07.2019 asper written commentsgiven by

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms on repeat basis as approved for AA No. 0710115198 dated 23.07.2019 as per written comments given by

31 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

MSME vide email dated 28.09.2020 as under:

dated 23.07.2019 as per written comments given by

31 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

MSME vide email dated 28.09.2020 as under:

MSME vide email dated 28.09.2020 as under:	MSME vide email dated 28.09.2020 as under:	MSME vide email dated 28.09.2020 as under:	MSME vide email dated 28.09.2020 as under:	MSME vide email dated 28.09.2020 as under:	MSME vide email dated 28.09.2020 as under:
ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
73089090	Pre-Fabricated<br>Staircases And Steel<br>Structurals (Net Content<br>of HTD Bars Made of<br>Mild Steel Round is<br>121.360 MTS.<br>(121360.000 Kgs.) In<br>Export)	121.360<br>MT	72141090	HTD Bar 12mm x<br>6m length Steel<br>Bar - MS 146-2014<br>Made of Mild Steel<br>(MS) Round	1.02 MT/MT<br>content in the<br>export product
84806000	Formwork Precast<br>Mould (Net Content of<br>HTD Bars Made Of<br>Mild Steel Round is<br>72.810 MTS.<br>(72810.000 Kgs.) In<br>Export)	72.810<br>MT	72141090	HTD Bar 12mm x<br>6m length Steel<br>Bar - MS 146-2014<br>Made of Mild Steel<br>(MS) Round	1.02 MT/MT<br>content in the<br>export product
RA concerned maytake suitable consequential action accordingly.

Case No.:11/2/81-	Party Name: AXORA	Meet No/Date:8/81-	Status:
ALC2/2020	RESOURCES LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0210209843
:01/81/050/00491/AM21/	:02/24/040/00002/AM21/	13.04.2020

---|---| |ALC2/2020||RESOURCES LIMITED||ALC2/2020||Approved| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0210209843||| |:01/81/050/00491/AM21/||:02/24/040/00002/AM21/||13.04.2020|||

	Case No.:11/2/81-<br>ALC2/2020	Case No.:11/2/81-<br>ALC2/2020	Party Name: AXORA<br>RESOURCES LIMITED<br>RLA File<br>:02/24/040/00002/AM21/	Party Name: AXORA<br>RESOURCES LIMITED<br>RLA File<br>:02/24/040/00002/AM21/	Party Name: AXORA<br>RESOURCES LIMITED<br>RLA File<br>:02/24/040/00002/AM21/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020
	HQ File<br>:01/81/050/00491/AM21/					Lic.No/Date:0210209843<br>13.04.2020
99	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per comments given by MSME via email dated 28.09.2020 as under:
	ITCHS<br>Code	Export Item	Quantity	ITCHS<br>Code	Import Item		Recommended Quantity
	78011000	Lead Ingot Purity<br>99.97% & Above	500 MT	78019920	Remelted<br>Lead Ingot		1.02 MT/MT net content<br>in the exportproduct
	Note:<br>1. Maximum percentage of lead in import item is 98%.<br>2. The applicant should import relevant items only.<br>RA concerned maytake suitable consequential action accordingly.

* 1. Maximum percentage of lead in import item is 98%. 2. The applicant should import relevant items only. RA concerned maytake suitable consequential action accordingly.|||||||||

Case No.:10/2/81-	Party Name: UNIVERSAL	Meet No/Date:8/81-	Status:
ALC2/2020	METALLICS PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0510413980	Action by :
:01/81/050/00490/AM21/	:05/24/040/00008/AM21/	13.04.2020	Applicant

100

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments of MSME:

To provide Certificate of Analysis of import item.
To provide manufacturing process with step-wise wastage.

32 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:12/2/81-	Party Name: ASIAN	Meet No/Date:8/81-	Status:
ALC2/2020	PLASTOWARES PVT. LTD.	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835651
:01/81/050/00492/AM21/	:03/94/040/01094/AM20/	18.04.2020

---| |ALC2/2020||PLASTOWARES PVT. LTD.||ALC2/2020||Rejected| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310835651||| |:01/81/050/00492/AM21/||:03/94/040/01094/AM20/||18.04.2020|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy 101 Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 30.04.2020 followed by reminders on 17.05.2020 & 21.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

Case No.:13/2/81-	Party Name: DISHA AUTO	Meet No/Date:8/81-	Status:
ALC2/2020	COMPONENTS PVT.LTD.	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835652
:01/81/050/00493/AM21/	:03/94/040/01006/AM20/	18.04.2020

-|---| |ALC2/2020||COMPONENTS PVT.LTD.||ALC2/2020||Approved| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310835652||| |:01/81/050/00493/AM21/||:03/94/040/01006/AM20/||18.04.2020|||

	Case No.:13/2/81-<br>ALC2/2020	Case No.:13/2/81-<br>ALC2/2020	Case No.:13/2/81-<br>ALC2/2020	Party Name: DISHA AUTO<br>COMPONENTS PVT.LTD.	Party Name: DISHA AUTO<br>COMPONENTS PVT.LTD.	Party Name: DISHA AUTO<br>COMPONENTS PVT.LTD.	Party Name: DISHA AUTO<br>COMPONENTS PVT.LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0310835652<br>18.04.2020	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0310835652<br>18.04.2020
	HQ File<br>:01/81/050/00493/AM21/			RLA File<br>:03/94/040/01006/AM20/
10<br>2	Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by Consultant (TEC-3) vide email dated 27.09.2020 as under:
	Sl.<br>No.	ITCHS<br>Code	Export Item		Quantity	Sl.<br>No.	ITCHS<br>Code	Import Item	Recommende<br>Quantity
	1	73079290	Coupling<br>Size 13-3/8"<br>K-55 OD<br>365.12, ID<br>323.12<br>(64.747 MT)		561.480<br>Meter	1	73043939	Carbon Steel<br>Seamless Pipes<br>As Per API 5ct<br>10th Edition 13-<br>3/8" Od 365.12 *<br>21 mm Thk Grade<br>K-55	97.5 MT

5 OD 365.12, ID 323.12 (64.747 MT)||561.480 Meter|1|73043939||Carbon Steel Seamless Pipes As Per API 5ct 10th Edition 13- 3/8" Od 365.12 * 21 mm Thk Grade K-55|97.5 MT|| ||2|73079290|Coupling Size 10-3/4" K-55 OD 298.45, ID 256.45 (85.768 MT)||917.990 Meter|2|73043939||Carbon Steel Seamless Pipes As Per API 5ct 10th Edition 10- 3/4" Od 298.45 * 21 mm Thk Grade K-55|127.5 MT|| ||3|73079290|Coupling Size 9-5/8" K-55 OD 269.88, ID 227.88 (71.317 MT)||776.350 Meter|3|73043939||Carbon Steel Seamless Pipes As Per API 5ct 10th Edition 9-5/8" Od 269.88 * 21 mm Thk Grade L- 80|99 MT|| ||4|73079290|Coupling Size 7"L-80||541.320 Meter|4|73043929||Carbon Steel Seamless Pipes|45 MT||

33 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

OD 200.03, As Per API 5ct ID 162.43 10th Edition 7" Od (32.271 MT) 200.03 * 18.80 mm Thk Grade K-55 Note: Grade of steel to match in export & import.

Case No.:16/2/81-	Party Name: CHAMPION	Meet No/Date:8/81-	Status:
ALC2/2020	ELECTRICAL INDUSTRIES	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510414029
:01/81/050/00496/AM21/	:05/23/040/00001/AM21/	20.04.2020

---| |ALC2/2020||ELECTRICAL INDUSTRIES||ALC2/2020||Rejected| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0510414029||| |:01/81/050/00496/AM21/||:05/23/040/00001/AM21/||20.04.2020|||

Decision: The Committee considered the case as per the agenda and noted that as per Policy 103 Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 30.04.2020 followed by reminders on 17.05.2020 & 22.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, New Delhi.

Case No.:15/2/81-	Party Name: JINDAL SAW	Meet No/Date:8/81-	Status:
ALC2/2020	LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510414028	Action by :
:01/81/050/00495/AM21/	:05/23/040/00490/AM20/	20.04.2020	TEC-3

104

Decision: The Committee considered the case as per agenda and noted that the firm’s reply was sent to Consultant (TEC-3) on 30.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

that the firm’s reply was sent to Consultant (TEC-3) on 30.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:14/2/81-	Party Name: POLYCAB	Meet No/Date:8/81-	Status:
ALC2/2020	INDIA LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835720
:01/81/050/00494/AM21/	:03/95/040/00015/AM21/	20.04.2020

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) via email dated 27.09.2020 as under:

105

Quantity of import items at Sl. No. 1 & 2 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 3 to 7 & 10 to 19 may be allowed as 1.05 Kgs/Kg content in the export product.
Quantity of import items at Sl. No. 8 may be allowed as 1.02 Kgs/Kg content in the export product.
Quantity of import item at Sl. No. 9 may be allowed as 4 % of steel to be galvanized.
Quantity of import items at Sl. No. 20 & 21 may be allowed as per packing policy.

34 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Note:

1. Sizes and weight as given with application may be incorporated in the description of the export item.

2. Grade of steel to match in import & export.

Case No.:17/2/81-	Party Name: MEHTA TUBES	Meet No/Date:8/81-	Status:
ALC2/2020	LIMITED	ALC2/2020	Rejected
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310835766
:01/81/050/00497/AM21/	:03/95/040/01132/AM20/	21.04.2020

Decision: The Committee considered the case as per the agenda and noted that as per Policy 106 Circular No. 23/2015-20 dated 15.05.2019 , the applicant was liable to forward the copy of application along with supporting documents to the concerned NC within two months of making the application. However, the same has not been received despite email dated 30.04.2020 followed by reminders on 17.05.2020 & 22.09.2020. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

Case No.:18/2/81-	Party Name: WIELAND	Meet No/Date:8/81-	Status:
ALC2/2020	METALS INDIA PRIVATE	ALC2/2020	Deferred
	LTD.	29.09.2020
HQ File	RLA File	Lic.No/Date:0710116357	Action by :
:01/81/050/00498/AM21/	:07/24/040/00307/AM20/	22.04.2020	Applicant

INDIA PRIVATE||ALC2/2020||Deferred| |||LTD.||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0710116357||Action by :| |:01/81/050/00498/AM21/||:07/24/040/00307/AM20/||22.04.2020||Applicant|

Decision: The Committee considered the case as per the agenda. The Committee noted that the 107 applicant was attended personal hearing in Meeting No. 05/81 held on 28.07.2020 for similar cases. Hence, the Committee decided to seek from the applicant to furnish the following information as per comments of MSME:

To submit a copy of Shipping Bill.
To submit Material Balancing with details of scrap.

Case No.:4/5/81-	Party Name: BRIGHT METALS	Meet No/Date:8/81-	Status:
ALC2/2020	INDIA PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:1310049585	Action by :
:01/81/050/00583/AM21/	:13/24/040/00011/AM21/	05.06.2020	Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 108 to furnish following information as per comments of Consultant (SKB):

What is the exact percentage of copper and zinc and also percentage of other elements in the export product?
What is the percentage of copper and zinc in the imported items and documentary evidence thereof?
Detail Technical note on manufacturing process including the relevant flow sheet.
Starting from the specification of the export product, basic calculation as to how of raw

C2/2020||Deferred| |||DISTRIBUTION SYSTEMS||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0910068926||Action by| |:01/81/050/00622/AM21/||:09/24/040/00161/AM21/||02.07.2020||: Section|

144 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 11.08.2020 for examination of the case. However, Consultant (TEC-3) asked to send physical file of the case. Therefore, the Committee decided to send the same to Consultant (TEC-3) for examination of the case.

Case No.:44/5/81-	Party Name: TOSHIBA	Meet No/Date:8/81-	Status:
ALC2/2020	TRANSMISSION &	ALC2/2020	Deferred
	DISTRIBUTION SYSTEMS	29.09.2020
HQ File	RLA File	Lic.No/Date:0910068927	Action by
:01/81/050/00623/AM21/	:09/24/040/00152/AM21/	02.07.2020	: Section

145 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 19.08.2020 for examination of the case. However, Consultant (TEC-3) asked to send physical file of the case. Therefore, the Committee decided to send the same to Consultant (TEC-3) for examination of the case.

Case No.:41/5/81-	Party Name: HVR SOLAR	Meet No/Date:8/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510414551	Action by :
:01/81/050/00620/AM21/	:05/23/040/00065/AM21/	03.07.2020	TEC-3

020**||PRIVATE LIMITED||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0510414551||Action by :| |:01/81/050/00620/AM21/||:05/23/040/00065/AM21/||03.07.2020||TEC-3|

146 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 25.09.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the comments.

		Case No.:45/5/81-<br>Party Name: POLYCAB<br>Meet No/Date:8/81-<br>Status:
		ALC2/2020<br>INDIA LIMITED<br>ALC2/2020<br>Deferred
		29.09.2020
147		HQ File<br>:01/81/050/00624/AM21/<br>RLA File<br>:03/95/040/00204/AM21/<br>Lic.No/Date:0310837033<br>06.07.2020<br>Action by<br>: TEC-3
		Decision:The Committee considered the case as per agenda and noted that a copy of application was
		sent to Consultant (TEC-3) on for examination of the case 28.07.2020 followed by a reminder on
		24.09.2020. However,no comments have been receivedyet. Therefore,the Committee decided to

46 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind again Consultant (TEC-3) for expediting the comments.

fore,the Committee decided to|

46 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind again Consultant (TEC-3) for expediting the comments.

Case No.:46/5/81-	Party Name: SIECHEM	Meet No/Date:8/81-	Status:
ALC2/2020	TECHNOLOGIES PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166865	Action by
:01/81/050/00625/AM21/	:04/24/040/00048/AM21/	06.07.2020	: TEC-3

148 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) for examination of the case on 29.07.2020 followed by a reminder 24.09.2020. However, no comments have been received yet. Therefore, the Committee decided to remind again Consultant (TEC-3) for expediting the comments.

Case No.:47/5/81-	Party Name: A-1 FENCE	Meet No/Date:8/81-	Status:
ALC2/2020	PRODUCTS COMPANY	ALC2/2020	Deferred
	PRIVATE LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0310837058	Action by :
:01/81/050/00626/AM21/	:03/94/040/00197/AM21/	07.07.2020	Applicant

ANY||ALC2/2020||Deferred| |||PRIVATE LIMITED||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310837058||Action by :| |:01/81/050/00626/AM21/||:03/94/040/00197/AM21/||07.07.2020||Applicant|

149 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.07.2020 followed by a reminder on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to grant last opportunity to the applicant for submitting the complete set of application.

Case No.:48/5/81-	Party Name: SIECHEM	Meet No/Date:8/81-	Status:
ALC2/2020	TECHNOLOGIES PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166869	Action by
:01/81/050/00627/AM21/	:04/24/040/00051/AM21/	07.07.2020	: TEC-3

150 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 29.07.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for the expediting comments.

onsultant (TEC-3) on 29.07.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for the expediting comments.

151	Case No.:1/8/81-ALC2/2020	Party Name: OLECTRA<br>GREENTECH LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-1
	<br>HQ File<br>:01/81/050/00702/AM21/	RLA File<br>:09/71/040/00037/AM21/	Lic.No/Date:0910069076<br>20.08.2020
	Decision:The Committee considered the case as per agenda and noted that the applicant’s reply was<br>sent to Consultant(TEC-1)on 01.10.2020 for examination of the case. However,no comments have

47 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

been received yet. Hence, the Committee decided to wait for the comments.

152	Case No.:2/8/81-ALC2/2020	Party Name: STERLITE<br>POWER TRANSMISSION<br>LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred<br> <br>Action by<br>: DPIIT
	<br>HQ File<br>:01/81/050/00703/AM21/	RLA File<br>:03/95/040/00111/AM21/	Lic.No/Date:0310837831<br>21.08.2020
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to DPIIT on 30.09.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

sent to DPIIT on 30.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.||||

153	Case No.:3/8/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-3
	<br>HQ File<br>:01/81/050/00704/AM21/	RLA File<br>:09/24/040/00270/AM21/	Lic.No/Date:0910069083<br>21.08.2020
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

154	Case No.:4/8/81-ALC2/2020	Party Name: TOSHIBA<br>TRANSMISSION &<br>DISTRIBUTION SYSTEMS	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-3
	<br>HQ File<br>:01/81/050/00705/AM21/	RLA File<br>:09/24/040/00271/AM21/	Lic.No/Date:0910069084<br>21.08.2020
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

onsultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.||||

Case No.:5/8/81-ALC2/2020	Party Name: JAIN	Meet No/Date:8/81-	Status:
	RECYCLING PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166991	Action by :
:01/81/050/00706/AM21/	:04/24/040/00031/AM21/	25.08.2020	Applicant

155 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

48 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:6/8/81-ALC2/2020	Party Name: JAIN	Meet No/Date:8/81-	Status:
	RECYCLING PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166992	Action by :
:01/81/050/00707/AM21/	:04/24/040/00032/AM21/	25.08.2020	Applicant

ING PRIVATE||ALC2/2020||Deferred| |||LIMITED||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0410166992||Action by :| |:01/81/050/00707/AM21/||:04/24/040/00032/AM21/||25.08.2020||Applicant|

156 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:7/8/81-ALC2/2020	Party Name: JAIN	Meet No/Date:8/81-	Status:
	RECYCLING PRIVATE	ALC2/2020	Deferred
	LIMITED	29.09.2020
HQ File	RLA File	Lic.No/Date:0410166993	Action by :
:01/81/050/00708/AM21/	:04/24/040/00044/AM21/	25.08.2020	Applicant

157 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:9/8/81-ALC2/2020	Party Name: APAR	Meet No/Date:8/81-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3410046325	Action by :
:01/81/050/00710/AM21/	:34/24/040/00121/AM21/	26.08.2020	Applicant

INDUSTRIES LIMITED||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:3410046325||Action by :| |:01/81/050/00710/AM21/||:34/24/040/00121/AM21/||26.08.2020||Applicant|

158 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

	Case No.:8/8/81-	Party Name: CHANDA		Meet No/Date:8/81-	Status:
	ALC2/2020	STEEL WORKS PRIVATE		ALC2/2020	Deferred
		LIMITED		29.09.2020
	HQ File	RLA File		Lic.No/Date:0510415010	Action by
159	:01/81/050/00709/AM21/<br>:05/23/040/00150/AM21/<br>26.08.2020<br>:TEC-3<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was
	sent to Consultant (TEC-3) on 21.09.2020 for examination		of the case. However, no comments have
	been received yet. Hence, the Committee decided to wait for the comments.
	The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 21.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

t a copy of application was sent to Consultant (TEC-3) on 21.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

49 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:12/8/81-	Party Name: APAR	Meet No/Date:8/81-	Status:
ALC2/2020	INDUSTRIES LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3410046335	Action by :
:01/81/050/00713/AM21/	:34/24/040/00141/AM21/	27.08.2020	Applicant

160 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:10/8/81-	Party Name: HI TECH	Meet No/Date:8/81-	Status:
ALC2/2020	STAINLESS WORLD	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310837913
:01/81/050/00711/AM21/	:03/94/040/00367/AM21/	27.08.2020

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 28.09.2020 given by MSME as under:

/040/00367/AM21/||27.08.2020|||

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments dated 28.09.2020 given by MSME as under:

For Pattern No SSPS/HTSW-01-A: the quantity of import item may be allowed as 3.62 Kg/Kg net content of export product after taking 1/3rd recovery from scrap and corresponding net weight of finished product is 0.36 Kg.
For Pattern No SSPS/HTSW-01-B : the quantity of import item may be allowed as 3.62 Kg/Kg

161 net content of export product after taking 1/3rd recovery from scrap and corresponding net weight of finished product is 0.35 Kg.

For Pattern No SSPS/HTSW-01-C: the quantity of import item may be allowed as 3.62 Kg/Kg net content of export product after taking 1/3rd recovery from scrap and corresponding net weight of finished product is 0.16 Kg.
For Pattern No SSPS/HTSW-01-D: the quantity of import item may be allowed as 3.62 Kg/Kg net content of export product after taking 1/3rd recovery from scrap and corresponding net weight of finished product is 1.10 Kg.
For Pattern No SSPS/HTSW-01-E: the quantity of import item may be allowed as 3.62 Kg/Kg net content of export product after taking 1/3rd recovery from scrap and corresponding net weight of finished product is 3.42 Kg.

Note: Drawing of patterns is enclosed. (Copy enclosed)

	Case No.:11/8/81-		Party Name: PONDY OXIDES		Meet No/Date:8/81-	Status:
	ALC2/2020		AND CHEMICALS LIMITED		ALC2/2020	Deferred
					29.09.2020
	HQ File		RLA File		Lic.No/Date:0410167001	Action by :
162	:01/81/050/00712/AM21/<br>:04/24/040/00072/AM21/<br>Decision:The Committee considered the case as per			27.08.2020<br>the agenda and noted that		Applicant<br>the copy of
	application has not yet been received from the applicant			and in this regard, an email was sent on
	24.09.2020. However, no	information has been received		yet. Therefore, the Committee decided to
	remind the applicant for submitting the complete set of application.
	The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application. The case stands deferred.

50 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind the applicant for submitting the complete set of application. The case stands deferred.

50 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:19/8/81-	Party Name: APL METALS	Meet No/Date:8/81-	Status:
ALC2/2020	LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0210210068	Action by :
:01/81/050/00720/AM21/	:02/24/040/00063/AM21/	28.08.2020	Applicant

163 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by MSME:

Certificate of Analysis of import item.

Case No.:18/8/81-	Party Name: LUMINO	Meet No/Date:8/81-	Status:
ALC2/2020	INDUSTRIES LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0210210063	Action by :
:01/81/050/00719/AM21/	:02/24/040/00065/AM21/	28.08.2020	Applicant

164 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

his regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:13/8/81-	Party Name: RHJ TUBES	Meet No/Date:8/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Approved
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310837976
:01/81/050/00714/AM21/	:03/95/040/00303/AM21/	28.08.2020

16 5

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by MSME via email dated 05.10.2020 as under:

	ITCHS<br>Code	Export	Item	Quantity	ITCHS<br>Code	Import Item	Recommended<br>Quantity
	74031300	Copper<br>(99.9%<br>OD)	Billets<br>155 mm	48000<br>Kgs	74040012	Copper Cable Druid<br>As Per ISRI- Cu<br>42%	1.03 Kgs/Kg net<br>content of the<br>exportproduct

Note: The applicant should import relevant items only.

Note: The applicant should import relevant items only.

	Case No.:20/8/81-	Party Name: SUYASH	Meet No/Date:8/81-	Status:
	ALC2/2020	GLOBAL PRIVATE	ALC2/2020	Deferred
		LIMITED	29.09.2020
166	HQ File	RLA File	Lic.No/Date:0310838008	Action by
	:01/81/050/00721/AM21/	:03/95/040/00334/AM21/	31.08.2020	: DPIIT
	Decision:The Committee considered the case as per agenda and noted that a copy of application was
	sent to DPIIT on 29.09.2020 for examination of the case. However,no comments have been received

51 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

yet. Hence, the Committee decided to wait for the comments.

167

Case No.:21/8/81-	Party Name: KEI	Meet No/Date:8/81-	Status:
ALC2/2020	INDUSTRIES LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510415079	Action by
:01/81/050/00722/AM21/	:05/23/040/00155/AM21/	01.09.2020	: DPIIT

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

nd noted that a copy of application was sent to DPIIT on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

	Case No.:24/8/81-	Party Name: RAYCHEM	Meet No/Date:8/81-	Status:
	ALC2/2020	RPG PVT LTD.	ALC2/2020	Deferred
			29.09.2020
	HQ File	RLA File	Lic.No/Date:0310838010	Action by
168	:01/81/050/00725/AM21/<br>:03/95/040/00324/AM21/<br>01.09.2020<br>: DPIIT<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was
	sent to DPIIT on 25.09.2020 for examination of the case. However, no comments have been received
	yet. Hence, the Committee decided to wait for the comments.
	The case stands deferred.

Case No.:22/8/81-	Party Name: VRAJ SYSCOM	Meet No/Date:8/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:2410043223	Action by :
:01/81/050/00723/AM21/	:24/24/040/00037/AM21/	01.09.2020	Applicant

169 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

his regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

	Case No.:23/8/81-<br>Party Name: VRAJ SYSCOM<br>Meet No/Date:8/81-		Status:
	ALC2/2020<br>PRIVATE LIMITED<br>ALC2/2020		Deferred
	29.09.2020
	HQ File<br>RLA File<br>Lic.No/Date:2410043224		Action by :
170	:01/81/050/00724/AM21/<br>:24/24/040/00036/AM21/<br>01.09.2020<br>Decision:The Committee considered the case as per the agenda and noted that	Applicant<br>the copy of
	application has not yet been received from the applicant and in this regard, an email		was sent on
	24.09.2020. However, no information has been received yet. Therefore, the Committee decided to
	remind the applicant for submitting the complete set of application.
	The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application. The case stands deferred.

52 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind the applicant for submitting the complete set of application. The case stands deferred.

52 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:25/8/81-	Party Name: K J V ALLOYS	Meet No/Date:8/81-	Status:
ALC2/2020	CONDUCTORS PVT. LTD.	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:5010002716	Action by :
:01/81/050/00726/AM21/	:50/24/040/00012/AM21/	02.09.2020	Applicant

171 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per comments given by MSME:

Manufacturing processes with stage-wise wastage.

Case No.:26/8/81-	Party Name: POLYCAB INDIA	Meet No/Date:8/81-	Status:
ALC2/2020	LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310838066	Action by :
:01/81/050/00727/AM21/	:03/95/040/00342/AM21/	02.09.2020	Applicant

172 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

his regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:27/8/81-	Party Name: WINOMECHANIC	Meet No/Date:8/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0410167028	Action by :
:01/81/050/00728/AM21/	:04/24/040/00084/AM21/	03.09.2020	Applicant

173 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:28/8/81-	Party Name: ENGINEERS INDIA	Meet No/Date:8/81-	Status:
ALC2/2020		ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0510415121	Action by :
:01/81/050/00729/AM21/	:05/23/040/00164/AM21/	04.09.2020	Applicant

174 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

his regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

53 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:32/8/81-	Party Name: PARAM	Meet No/Date:8/81-	Status:
ALC2/2020	INDUSTRIES	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310838100	Action by :
:01/81/050/00733/AM21/	:03/95/040/00344/AM21/	04.09.2020	Applicant

175 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:31/8/81-	Party Name: R T JAIN AND	Meet No/Date:8/81-	Status:
ALC2/2020	COMPANY	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0310838097	Action by :
:01/81/050/00732/AM21/	:03/95/040/00347/AM21/	04.09.2020	Applicant

C2/2020**||COMPANY||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:0310838097||Action by :| |:01/81/050/00732/AM21/||:03/95/040/00347/AM21/||04.09.2020||Applicant|

176 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

	Case No.:29/8/81-<br>Party Name: TPI COMPOSITES<br>Meet No/Date:8/81-	Status:
	ALC2/2020<br>INDIA PRIVATE LIMITED<br>ALC2/2020	Deferred
	29.09.2020
	HQ File<br>RLA File<br>Lic.No/Date:0410167038	Action by :
177	:01/81/050/00730/AM21/<br>:04/24/040/00083/AM21/<br>04.09.2020<br>TEC-1<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was
	sent to Consultant (TEC-1) on 29.09.2020 for examination of the case. However, no comments have
	been received yet. Hence, the Committee decided to wait for the comments.
	The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-1) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

t a copy of application was sent to Consultant (TEC-1) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

	Case No.:30/8/81-<br>Party Name: TPI	Meet No/Date:8/81-	Status:
	ALC2/2020<br>COMPOSITES INDIA	ALC2/2020	Deferred
	PRIVATE LIMITED	29.09.2020
	HQ File<br>RLA File	Lic.No/Date:0410167039	Action by
178	:01/81/050/00731/AM21/<br>:04/24/040/00082/AM21/<br>04.09.2020<br>: TEC-1<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was
	sent to Consultant (TEC-1) on 29.09.2020 for examination of the case. However, no comments have
	been received yet. Hence, the Committee decided to wait for the comments.
	The case stands deferred.

54 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Case No.:33/8/81-	Party Name: AMPCO METAL	Meet No/Date:8/81-	Status:
ALC2/2020	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3110067844	Action by :
:01/81/050/00734/AM21/	:31/83/040/00052/AM21/	07.09.2020	Applicant

IA PRIVATE LIMITED||ALC2/2020||Deferred| |||||29.09.2020||| |HQ File||RLA File||Lic.No/Date:3110067844||Action by :| |:01/81/050/00734/AM21/||:31/83/040/00052/AM21/||07.09.2020||Applicant|

179 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:34/8/81-	Party Name: RYKER BASE	Meet No/Date:8/81-	Status:
ALC2/2020	PRIVATE LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:3410046379	Action by :
:01/81/050/00735/AM21/	:34/24/040/00145/AM21/	07.09.2020	Applicant

180 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:35/8/81-	Party Name: PESHWA	Meet No/Date:8/81-	Status:
ALC2/2020	ENGINEERING & WIRE	ALC2/2020	Deferred
	COMPANY	29.09.2020
HQ File	RLA File	Lic.No/Date:5210043530	Action by :
:01/81/050/00736/AM21/	:52/24/040/00035/AM21/	09.09.2020	Applicant

RING & WIRE||ALC2/2020||Deferred| |||COMPANY||29.09.2020||| |HQ File||RLA File||Lic.No/Date:5210043530||Action by :| |:01/81/050/00736/AM21/||:52/24/040/00035/AM21/||09.09.2020||Applicant|

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per comments given by Consultant (SKB):

181

Is wire mesh/netting is of one piece? If not, how many numbers of wire mesh are to be exported in total weight of export i.e. 998020 Kgs?
What is use of paper tubes in export of wire mesh?
How much square meter and weight of each bundle/roll?
What is the meaning of redrawn Galvanized wire?
Process write up in one page and one colored photograph of export product.

182	Case No.:40/8/81-<br>ALC2/2020	Party Name: APAR<br>INDUSTRIES LIMITED	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00741/AM21/	RLA File<br>:34/24/040/00352/AM20/	Lic.No/Date:3410046384<br>10.09.2020	<br>Action by :<br>Applicant
	Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>24.09.2020. However,no information has been receivedyet. Therefore,the Committee decided to

application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However,no information has been receivedyet. Therefore,the Committee decided to||||

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to

55 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind the applicant for submitting the complete set of application.

Case No.:36/8/81-	Party Name: RAMESHWAR	Meet No/Date:8/81-	Status:
ALC2/2020	STEEL	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0810148532	Action by :
:01/81/050/00737/AM21/	:08/24/040/00137/AM21/	10.09.2020	Applicant

183 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

184

gard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

184

Case No.:39/8/81-	Party Name: FCI OEN	Meet No/Date:8/81-	Status:
ALC2/2020	CONNECTORS LIMITED	ALC2/2020	Deferred
		29.09.2020
HQ File	RLA File	Lic.No/Date:0710116993	Action by
:01/81/050/00740/AM21/	:07/21/040/00317/AM21/	11.09.2020	: MeitY

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MeitY on 25.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

185	Case No.:38/8/81-<br>ALC2/2020	Party Name: ICON POWER<br>SOLUTIONS PVT LTD	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0510415183<br>11.09.2020	Status:<br>Deferred<br> <br>Action by<br>: TEC-3
	<br>HQ File<br>:01/81/050/00739/AM21/	RLA File<br>:05/23/040/00170/AM21/
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

onsultant (TEC-3) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.||||

186	Case No.:37/8/81-<br>ALC2/2020	Party Name: SUNRISE<br>EXPORTS INTERNATIONAL	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00738/AM21/	RLA File<br>:03/95/040/00339/AM21/	Lic.No/Date:0310838223<br>11.09.2020	Action by :<br>Applicant
	<br>Decision:The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>24.09.2020. However, no information has been received yet. Therefore, the Committee decided to<br>remind the applicant for submitting the complete set of application.<br>The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 24.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application. The case stands deferred.

56 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

remind the applicant for submitting the complete set of application. The case stands deferred.

56 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

187	Case No.:41/8/81-<br>ALC2/2020	Party Name: ULTRA<br>ENGINEERS<br>RLA File<br>:31/83/040/00064/AM21/	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:3110067852<br>14.09.2020	Status:<br>Deferred
	<br>HQ File<br>:01/81/050/00742/AM21/			Action by :<br>TEC-3
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to Consultant (TEC-3) on 25.09.2020 for examination of the case. However, no comments have<br>been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 25.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.

s sent to Consultant (TEC-3) on 25.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. The case stands deferred.

188	Case No.:42/8/81-<br>ALC2/2020	Party Name: C.L.GUPTA<br>EXPORTS LTD.	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0510415219<br>15.09.2020	Status:<br>Deferred<br> <br>Action by<br>: MSME
	<br>HQ File<br>:01/81/050/00743/AM21/	RLA File<br>:05/23/040/00168/AM21/
	<br>Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MSME on 29.09.2020 for examination of the case. However, no comments have been<br>received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

189	Case No.:43/8/81-<br>ALC2/2020	Party Name: GAVIRANGA<br>ENTERPRISES	Meet No/Date:8/81-<br>ALC2/2020<br>29.09.2020<br>Lic.No/Date:0710117012<br>15.09.2020	Status:<br>Deferred<br> <br>Action by<br>: MeitY
	<br>HQ File<br>:01/81/050/00744/AM21/	RLA File<br>:07/24/040/00159/AM21/
	Decision:The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MeitY on 25.09.2020 for examination of the case. However, no comments have been received<br>yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

57 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

r>yet. Hence, the Committee decided to wait for the comments. The case stands deferred.||||

57 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

Minutes of the Offline Cases

			Minutes of the Offline Cases
SI.<br>No.	Applicant's<br>Name / AA<br>No.	HQ/RA File<br>No.	Case History	Decision	Status
	KOTSONS<br>PVT.<br>LIMITED<br>0610038672<br>dated<br>09.08.2017	01/81/050/00<br>378/AM18/<br>06/24/040/00<br>015/AM18	The case was rejected in M. No.04/81 dated<br>27.08.2018 due to non submission of reply of DHI’s<br>deficiency letter. The applicant vide letter dated<br>03.04.2019 furnished reply with a request to fix the<br>ad-hoc norms. The applicant’s reply was referred to<br>DHI on 18.07.2019 along with reminder on<br>11.10.2019. The case was considered in M. No. 14/81<br>dated 16.10.2019, the representative of DHI informed<br>that the applicant has still not furnish point wise reply<br>of the deficiencies raised by DHI vide U.O. No.<br>3(92)/17-TS(B)<br>dated<br>22.12.2017.<br>Hence,<br>the<br>Committee decided to seek from the applicant to<br>furnish the requisite information as per advice of<br>representative of DHI. DHI D/L sent again to<br>applicant via email dated 05.11.2019. Applicant's<br>reply dt. 15.11.2019 was sent to DHI on 21.11.2019.<br>As per decision of M. No. 20/81 dt. 08.01.2020<br>reminder was sent to DHI on 28.02.2020 for<br>expediting the comments. The case was last<br>considered in M. No.

19 was sent to DHI on 21.11.2019. As per decision of M. No. 20/81 dt. 08.01.2020 reminder was sent to DHI on 28.02.2020 for expediting the comments. The case was last considered in M. No. 23/81 dt 04.03.2020, the representative of DHI informed in meeting that the applicant did not give the reply to the queries properly. The applicant has requested for ratification under SION C334 which is for CRGO Core whereas the applicant proposes to manufacture and morphous core. Hence, the Committee decided to call the applicant for personal hearing to explain the case in the NC meeting. As per NC decision email dated 27.07.2020 was sent to the applicant to attend PH on 28.07.2020. However, nobody was attended personal hearing on behalf of the applicant. Therefore, the Committee decided to give last opportunity to the applicant to attend personal hearing and also decided to send main file to DHI as requested by.

g on behalf of the applicant. Therefore, the Committee decided to give last opportunity to the applicant to attend personal hearing and also decided to send main file to DHI as requested by. The main file was sent on 28.09.2020 to DHI for examination of the case and also, an email was sent to the applicant on 22.09.2020 to attendpersonal hearing.| The Committee considered the case as per agenda and noted that no reply has been received from the applicant despite many reminders. Therefore, the Committee decided to reject the applicant’s request of fixation of ad-hoc norms under intimation of RA, Kanpur. RA concerned may take suitable consequential action accordingly.| Rejected| |R1|||||| ||||||| ||NASH INDUSTRIES (I) PRIVATE LIMITED, BENGALUR U| 01/80/162/00 302/AM18/ 1/11/2015:E OU:CSEZ/14 76/|DC, CSEZ vide letter dated 03.11.2017, followed by representation dated 29.03.2018 from the applicant, had requested for fixation of scrap/wastage norms for the manufacture and export of Sheet Metal Pressed Components made of iron and steel, copper, brass and such other metals/alloys. The matter was considered in M. No.

crap/wastage norms for the manufacture and export of Sheet Metal Pressed Components made of iron and steel, copper, brass and such other metals/alloys. The matter was considered in M. No. 01/81 dated 10.04.2019 and on the advice of Consultant (TEC-3), some information was sought from the applicant via email dated 25.05.2019 followed by reminder on 12.07.2019. The email reply dated 13.11.2019 was referred to Consultant(TEC-3)via email dated 14.11.2019. The| The Committee decided to grant last opportunity to the applicant to furnish the requisite information.| Deferred| |R2|||||| |||||||

58 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

case was considered in M. No. 20/81 dt. 08.01.2020. The Committee noted that the written comments dated 01.01.2020 of Consultant (TEC-3) as under: 1. Nash Industries, an EOU, had requested for fixation of wastage norms for export product ‘sheet metal pressed components for UPS & other industrial use’. 2. Applicant has informed that they are manufacturing 1000 parts & components & have submitted some details for 6 components. 3. Components are manufactured from iron & steel, Cu & Al sheets. 4. Wastages claimed is in the range of 38% to 50% which is average of vide range of 1.5% to 98.4% 5. As range of wastage is very wide and number of components very large, it is not possible to work out wastage of every component.

range of 38% to 50% which is average of vide range of 1.5% to 98.4% 5. As range of wastage is very wide and number of components very large, it is not possible to work out wastage of every component. In view of the above, the Committee decided to call the applicant for PH. As per NC decision, an email dated 25.02.2020 was sent to the applicant to attend PH on 04.03.2020. The case was last considered in M. No. 22/81 dt. 19.02.2020 as per agenda and noted that the applicant vide email dated 28.02.2020 has sought another date for personal hearing on behalf of the applicant. Therefore, the Committee decided to give one more opportunity to the applicant for personal hearing to explain the case before Norms Committee. During personal hearing held in Meeting No. 05/81 on 28.07.2020, your representatives to furnish following information:

To submit details by making subgroup of items manufactured in the limited range of wastages as there is wide variation in the wastage of items manufactured i.e. 1.5% to 98.40%.

D/L was sent to the applicant on 22.09.2020. However, no reply has been received yet.

imited range of wastages as there is wide variation in the wastage of items manufactured i.e. 1.5% to 98.40%.

D/L was sent to the applicant on 22.09.2020. However, no reply has been received yet.

The case was ratified in M. No. 19/81 dated The Committee decided to Deferred 05.12.2017 as per SION C-1647. The applicant vide grant last opportunity to the letter dated 20.06.2018 requested to re-fix the ad-hoc applicant to furnish the norms. As per decision of M. No. 17/81 dt. requisite information. 27.11.2019, the case was referred to DPIIT on FITCAST 31.12.2019. The case was considered in M. No. 20/81 FOUNDERS dt. 08.01.2020 and decided to refer the case to & Consultant (TEC-1) for examination & comments. As ENGINEERS 01/81/050/00 per NC decision, the case was referred to Consultant PRIVATE 362/AM17/ (TEC-1) on 19.02.2020. The case was last considered R3 LIMITED in M. No. 23/81 dt. 04.03.2020 and decided to ask the 08/24/040/00 applicant to furnish production consumption data 177/AM17 duly certified from Statuary Auditor. As per NC 0810138679 decision, D/L has been sent on 17.04.2020. Reply dated received vide email dated 16.7.2020 and forwarded to 16.09.2016 Consultant (TEC-1) for examination and comments. The Committee considered the case in its meeting No. 5/81 held on 28.7.2020 and noted that applicant’s reply dated 16.07.2020 is deficient. Therefore, the Committee decided to seek again form the applicant

59 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

ated 16.07.2020 is deficient. Therefore, the Committee decided to seek again form the applicant

59 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

			to furnish the following information :<br>1. To provide again production consumption data as<br>submitted earlier is not for total quantity of export in<br>the licence. Also, quantity of export indicated in 1st<br>column does not match with 3rdcolumn.<br>To provide clarification for why in the covering<br>letter, it is stated thatFinal content of binderis<br>6.81% in the casting, which is not true since casting<br>does not contain any organic binder. D/L was sent to<br>the applicant on 22.09.2020. However, no reply has<br>been receivedyet.	<br> <br> <br> <br> <br> <br>
	TRIVENI<br>AERONAUTI<br>CS PRIVATE<br>LIMITED,<br>TUMKUR	01/81/061/00<br>002/AM18/<br>1/43/2008:E<br>OU:CSEZ/40<br>3/	DC,<br>CSEZ<br>vide<br>letter<br>No.<br>1/43/2008:EOU:CSEZ/403,<br>dated<br>15.3.2017<br>forwarded an application of the applicant requesting<br>for fixation of scrap/wastage norms on regular basis<br>under 100% EOU for manufacture and export of<br>commercial aircraft parts. A copy of representation<br>was sent to MSME for examination of the case on<br>11.04.2017 followed by a reminder on 12.07.2019 &<br>26.011.2019. The case was considered in M. No.<br>20/81 dt. 08.01.2020 and decided to wait for the<br>comments. The case was last considered in M. No.<br>23/81 dt. 04.03.2020 and decided to remind MSME<br>for expediting the comments.

ed in M. No. 20/81 dt. 08.01.2020 and decided to wait for the comments. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind MSME for expediting the comments. As per NC decision, reminder issued to MSME on 20.04.2020. MSME D/L received vide email dated 26.04.2020. MSME D/L dt. 26.04.2020 was sent to the applicant on 27.07.2017 followed by a reminder on 22.09.2020 to furnish the requisite information.| The Committee noted that the applicant vide email dated 29.09.2020 requested for extension of time upto 90 days (December 2020) to furnish reply. Therefore, the Committee decided to wait for reply of the applicant.| Deferred| |R4|||||| ||||||| ||KUN AEROSPACE PRIVATE LIMITED| 01/81/171/00 013/AM20/ A/2011/012/ EOU-TN HQ E-office Computer No.: 17497|DC, MEPZ-SEZ vide letter no. A/2011/012/EOU-TN dated 09.11.2018 forwarded a letter dated 22.06.2018 of the applicant for fixation of wastage norms for its manufactured items Aerospace Components and Non-Aerospace Components. As per NC decision in M. No. 14/81dated 16.10.2019, the case was referred to MSME on 05.11.2019 along with reminder on 03.01.2020. The case was considered in M. No. 20/81 dt. 08.01.2020 and decided to wait for the comments. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind MSME for expediting the comments.

ed in M. No. 20/81 dt. 08.01.2020 and decided to wait for the comments. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind MSME for expediting the comments. As per NC decision, reminder issued to MSME on 20.04.2020. MSME D/L received vide email dated 26.04.2020. MSME D/L dt. 26.04.2020 was sent to the applicant on 27.07.2017 followed by a reminder on 28.09.2020 to furnish the requisite information.| The Committee noted that the applicant vide email dated 29.09.2020 requested for extension of time upto 45 days to furnish reply. Therefore, the Committee decided to wait for reply of the applicant.| Deferred| |R5|||||| ||||||| ||POOJAWEST ERN METALIKS LIMITED, 100% EOU|01/81/171/00 014/AM20/ KASEZ/100 %EOU/II/13/ 2002-03/Vol. I/| KASEZ vide letter No. KASEZ/100% EOU/II/13/2002-03/Vol. I/-6384 dated 06.09.2018 forwarded a copy of application dated 14.04.2018 of the applicant for fixation of wastage norms for manufacturing of products made of brass rods, brass solid bars, Brass hollow bars, profile and section in addition to routineproduct made out of mix metal| The Committee decided to grant last opportunity to the applicant to furnish the requisite information.| Deferred| |R6|||||| |||||||

The Committee decided to grant last opportunity to the applicant to furnish the requisite information.| Deferred| |R6|||||| |||||||

60 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

			brass<br>scrap.<br>KASEZ<br>vide<br>letter<br>No.<br>KASEZ/100%EOU/II/13/2002-03/Vol. I/1048 dated<br>25.04.2018 conveyed the approval of the DC for ad-<br>hoc norms as per Annexure, in terms of Para 6.08(e)<br>of FTP, 2015-20, for a period of 06 (six) months<br>subject to final fixation of Norms by the NC in<br>DGFT. As per NC decision of M. No. 14/81dated<br>16.10.2019, the case was referred to MSME on<br>05.11.2019 followed by a reminder on 03.01.2020.<br>The case was considered in M. No. 20/81 dt.<br>08.01.2020 and decided to wait for the comments.<br>The case was last considered in M. No. 23/81 dt.<br>04.03.2020 and decided to remind MSME for<br>expediting the comments. As per NC decision,<br>reminder issued to MSME on 20.04.2020. MEME<br>D/L received on 26.04.2020. MSME D/L dt.<br>26.04.2020 was sent to the applicant on 27.07.2017<br>followed by a reminder on 22.09.2020. However, no<br>replyhas been receivedyet.	<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
	MARGEN<br>IMPEX<br>LIMITED,<br>ANAND,<br>GUJARAT, A<br>100% EOU	<br>01/81/171/00<br>001/AM19/<br>KASEZ/100<br>%EOU/II/77/<br>2004-<br>05/VOL.I/60<br>26	KASEZ vide letter KASEZ/100% EOU/II/77/2004-<br>05/Vol.

r>IMPEX LIMITED, ANAND, GUJARAT, A 100% EOU| 01/81/171/00 001/AM19/ KASEZ/100 %EOU/II/77/ 2004- 05/VOL.I/60 26|KASEZ vide letter KASEZ/100% EOU/II/77/2004- 05/Vol. I/6026 dated 28.08.2018 forwarded a copy of letter along with application of Mergen Impex Limited for fixation of scrap/wastage norms for manufacture and export of parts and accessories of test benches. The case was referred to Consultant (TEC-3) on 11.10.2019. As per NC decision of M. No. 20/81 dt. 08.01.2020, a deficiency letter was sent to the applicant on 24.02.2020 requesting to furnish following information: (i) List of export products vis- à-vis import items (ii) Wastage claimed. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind the applicant for furnishing the requisite information. As per NC decision, reminders were sent to the applicant on 18.04.2020 & 22.09.2020 to furnish the requisite information.| The Committee noted that the applicant vide email dated 28.09.2020 requested for extension of time upto 05.10.2020 to furnish reply. Therefore, the Committee decided to wait for reply of the applicant.| Deferred| |R7|||||| |||||||

br>of time upto 05.10.2020 to furnish reply. Therefore, the Committee decided to wait for reply of the applicant.| Deferred| |R7|||||| ||||||| ||LEIGHTON WELSPUN CONTRACT ORSPRIVAT E LIMITED 0310764005 dated 01.01.2014|01/81/050/00 060/AM15/ 03/95/040/00 752/AM14/ HQ E-office Computer No.: 23969| The case was rejected in M. No. 05/81dated 18.06.2015 due to non submission of reply of deficiency letter dated 11.11.2014. However, the applicant vide letter dated 12.06.2018 furnished the reply with a request to fix the ad-hoc norms. The applicant’s reply was forwarded to DHI for examination of the case on 21.06.2018 followed by reminder on 12.07.2019 & 11.10.2019. As per NC decision of M. no. 20/81 dt. 08.01.2020, a copy of application was referred to DHI on 25.02.2020. The case was last considered in M. No. 23/81 dt. 04.03.2020, the representative of DHI informed that the case is under examination. The Committee considered the case as per agenda and noted that DHI via email dated 16.07.2020 asked for complete set of application. Therefore, the Committee decided to send the complete set of application along with the applicant's reply dated 12.06.2018 with all annexure to DHI for examination of the case.| The Committee decided to wait for the comments.| Deferred| |R8|||||| |||||||

nation of the case.| The Committee decided to wait for the comments.| Deferred| |R8|||||| |||||||

61 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

As per comments of DHI received via email dated 29.09.2020, the case was referred to DPIIT on 30.09.2020 for examination & comments. However, no comments have been received yet.

The Committee considered Deferred the case as per agenda and The case was rejected in M. No.18/81dated Consultant (TEC-1) informed 29.11.2016 due to non submission of reply of that the applicant’s reply is deficiency letter dated 03.05.2016 followed by deficient. Therefore, the reminder dated 11.07.2016. However, the applicant Committee decided to ask vide letter dated 28.12.2016 furnished the reply with again from the applicant to a request to fix the ad-hoc norms. The case was furnish following information referred to Consultant (TEC-1) on 07.08.2019 for examination. As per NC decision of M. No.11/81 as per comments of Consultant (TEC-1). dated 04.09.2019, a deficiency letter was sent to the 1. Material balance between applicant vide email dated 04.10.2019 requesting to INDO COOL furnish following information: import and export in COMPOSITE 1.

09.2019, a deficiency letter was sent to the 1. Material balance between applicant vide email dated 04.10.2019 requesting to INDO COOL furnish following information: import and export in COMPOSITE 1. Material balance between import & export in weight terms taking in to S PRIVATE 01/81/050/00 LIMITED 464/AM16/ quantity terms taking in to consideration of consideration following indigenous procures items for each export product for each of export separately. 04/24/040/00 product. 2. Percentage wastage at each stage of manufacturing. 0410160874 114/AM16/ 2. Net content of imported 3. Production & corresponding consumption of dated inputs plus indigenous various raw material & consumable for last two year 05.08.2015 duly certified by GST authorities. inputs excluding The applicant was also reminded on 13.11.2019 & wastages to match with 02.01.2020. The case was considered by NC in its M. export product weight No. 20/81 dt. 08.01.2020 and decided to wait for the indicated in the export applicant’s reply. The case was last considered in M. obligation in the licence. No. 23/81 dt. 04.03.2020 and decided to remind again 3. Generic name of import the applicant for submitting the requisite information. item No. 2. As per NC decision, final reminder was sent to applicant on 18.04.2020. Reply dated 24.4.2020 was 4. Specification and end use referred to Consultant (TEC-1) on 29.04.2020. of import item No. 2 & 16.

62 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

cification and end use referred to Consultant (TEC-1) on 29.04.2020. of import item No. 2 & 16.

62 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

|| JINDAL SAW LIMITED 0510395407 dated 24.08.2015| 01/81/050/00 463/AM16/ 05/23/040/00 207/AM16/|The case was ratified in M. No. 12/81 dated 06.09.2016 as per DIPP U. O. No. 12/76/2016- TSW/28 dated 06/09/2016. However, the applicant vide letter dated 15.02.2019 requested to re-fix the ad-hoc norms. A copy of representation was referred to Consultant (TEC-3) on 07.08.2019 for examination. Deficiency letter was sent to the applicant on 04.10.2019 as per NC decision of Meeting No. 11/81 dated 04.09.2019. The applicant's reply dated 14.11.2019 was referred to Consultant (TEC-3) for examination. NC observed in its M. No. 20/81 dt. 08.01.2020 that the authorization is dated 24.08.2015 and the party would have exported the said items as per norms ratified earlier. Therefore, the Committee decided to seek a report from RA regarding the thickness/surface area of coating w.r.t Adhesive and Polyethylene in the export product. An email dated 02.03.2020 was sent to RA, New Delhi. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind the RA, New Delhi, inviting attention of Head of RA, for submitting the requisite information.

New Delhi. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to remind the RA, New Delhi, inviting attention of Head of RA, for submitting the requisite information. As per NC decision, reminder was sent to RA, New Delhi, on 10.07.2020, 16.07.2020, 22.9.2020 & 30.9.2020 for expediting the matter.| The Committee considered the case as per agenda and noted that the report received vide email dated 30.9.2020 from CLA, New Delhi was forwarded to Consultant (TEC-3) on the same day for examination. However, Consultant (TEC-3) requested to send physical file to examine the case. Therefore, the Committee decided to send physical file to Consultant (TEC-3) for examination of the case.| Deferred| |---|---|---|---|---|---| |R10|||||| ||||||| || JINDAL SAW LIMITED 0510407943 Dated 28.09.2018| 01/81/050/00 506/AM19/ 05/23/040/00 278/AM19/|The case was ratified in M. No. 9/81 dated 07.08.2019 as per written comments dated 30.07.2019 of Consultant (TEC-3). The applicant vide letter dated 04.10.2019 had requested for revision of ad-hoc norms. As per decision of M. No.14/81 dated 16.10.2019, the case was referred to Consultant (TEC-3) on 25.10.2019 for examination. The case was considered in M. No.

for revision of ad-hoc norms. As per decision of M. No.14/81 dated 16.10.2019, the case was referred to Consultant (TEC-3) on 25.10.2019 for examination. The case was considered in M. No. 20/81 dt. 08.01.2020 and decided to wait for the comments. The case was last considered in M. No. 23/81 dt. 04.03.2020 and decided to send main file to Consultant (TEC-3) as requested in the meeting. The case was in M. No. 5/81 held on 28.7.2020 wherein Consultant (TEC-3) informed that the applicant in its representation dated 04.10.2019 has requested against reduction in quantity of import items at Sl. No. 15 & 16 and deletion of item nos. 17 & 18. Also, the quantity of import items at Sl. No. 15 & 16 were calculated as per thickness given by the applicant in their letter dated 25.04.2019 and report of study group. Now, the applicant has revised thickness of coating. On the advice of Consultant (TEC-3), the Committee decided to seek from the applicant to furnish following information: 1. To explain how repair of inner layer of coating will be carried out, regarding import items at Sl. No. 17 & 18.| The Committee decided to remind the applicant for furnishing the requisite information.| Deferred| |R11|||||| |||||||

63 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

r furnishing the requisite information.| Deferred| |R11|||||| |||||||

63 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

			2. Justification for 2 types of kits and their quantity.<br>D/L was sent to the applicant on 22.09.2020.<br>However, no reply has been received yet.
	<br>JINDAL SAW<br>LIMITED<br>0510407744<br>dated<br>11.09.2018	<br>01/81/050/00<br>652/AM19/<br>05/23/040/00<br>250/AM19/	The case was ratified in M. No.11/81-ALC2/2019<br>dated 04.09.2019 as per written comments dated<br>04.09.2019 given by Consultant (TEC-3). The<br>applicant vide letter dated 02.01.2020 requested for<br>revision of ad-hoc norms ratified in respect of import<br>item Sl. No. 4 & 5 as applied in the AA. The case<br>was referred to Consultant (TEC-3) on 25.02.2020 as<br>per NC decision of Meeting No. 20/81 dt.<br>08.01.2020. The case was last considered in M. No.<br>23/81 dt. 04.03.2020 and decided to wait for the<br>comments.<br>The case was in M. No. 5/81 held on 28.7.2020<br>wherein Consultant (TEC-3) informed that the<br>applicant in its representation dated 02.01.2020 has<br>requested against reduction in quantity of import item<br>at Sl. No. 4 & reduction of wastage of import item at<br>Sl. No. 5. Also, quantity of import item at Sl. No. 4<br>was calculated as per thickness given by the applicant<br>in their letter dated 13.06.2019 and report of study<br>group. Now, the applicant has revised thickness of<br>coating.

t item at Sl. No. 4 was calculated as per thickness given by the applicant in their letter dated 13.06.2019 and report of study group. Now, the applicant has revised thickness of coating. On the advice of Consultant (TEC-3), the Committee decided to seek from the applicant to furnish following information: 1. To provide justification for increasing wastage regarding import item at Sl. No. 5. D/L was sent to the applicant on 22.09.2020. However,no replyhas been receivedyet.| The Committee decided to remind the applicant for furnishing the requisite information.| Deferred| |R12|||||| ||||||| || GLOBAL OVERSEAS 0510324256 Dated 09.05.2012|01/81/050/00 144/AM13/ 05/23/040/00 029/AM13/|The case was rejected in M. No. 17/81 dated 20.11.2012 on the ground that no manufacturing activity was involved. The applicant vide letter dated 08.02.2013 represented against above NC decision which was considered in M. No. 05/81 dated 06.06.2013. The applicant appeared for Personal Hearing on 03.05.2013 and showed sample of unfinished/unpolished items and the finished product. NC noted that the applicant is polishing the utensils and doing engraving of same designs on the utensils as per foreign buyer requirement. Since, polishing is a manufacturing activity, NC decided to approve the case on net to net basis.

ils and doing engraving of same designs on the utensils as per foreign buyer requirement. Since, polishing is a manufacturing activity, NC decided to approve the case on net to net basis. Now, the applicant vide letter dated 30.10.2017 stated that it had imported goods 89.95 M.T. in place of 100 M.T. Thereafter, same goods were exported after polishing and engraving designs on utensils as per buyer’s requirement. Further, it stated that export item name i.e. Household Kitchen appliances (Furnished & designed utensils made up of stainless steel) have been mentioned in Shipping Bill for Export is same as per descriptions mentioned in the Condition Sheet of AA. CLA, New Delhi vide letter dated 30.5.2014 advised the| The Committee considered the case as per agenda and noted that no reply has been received from the applicant despite many reminders. Therefore, the Committee decided to reject the applicant’s request of fixation of ad-hoc norms. RA concerned may take suitable consequential action accordingly.| Rejected| |R13|||||| |||||||

64 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

accordingly.| Rejected| |R13|||||| |||||||

64 | Page 79 Minutes of NC-II Meeting No. 08/81 scheduled for 29.09.2020 and held on 06.10.2020

company to submit documentary evidence regarding consumption of SS content in the export/end product and grade/thickness as the same is not mentioned in the Shipping Bills. Therefore, the company requested to look into the matter for suitable reply to enable them to clear Government dues and get EODC on the basis of exported goods as per entries in Shipping Bills. The applicant’s letter dated 30.10.2017 was forwarded to DPIIT on 16.03.2018 for examination. This case was considered by NC in its M. No.4/81Pt.II dated 03.10.2018. NC decided to call report from the RA on letter of the applicant under intimation to applicant and defer the case. CLA, New Delhi vide letter dated 01.05.2019 stated that there is no Grade mentioned with the description of import & export item as per authorization but as per B/Es, Grade of Stainless steel mentioned as Grade 410. Accordingly, a deficiency letter was issued on 30.05.2014 followed by reminder dated 07.01.2016 for clarification, but applicant has not submitted any reply in this regard. The representation was referred to DPIIT on 11.10.2019 followed by reminders dated 21.11.2019 & 14.01.2020. The case was considered in M. No. 20/81 dt. 08.01.2020 and decided to wait for the comments. T

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 7407 --apply.