IN FORCE Norms Committee — Engineering (Gr A / NC-II) Advance Authorisation 2020-06-17

DGFT Committee Minutes

Document text

DIRECTORATE GENERAL OF FOREIGN TRADE - (DES II SECTION)

MINUTES OF THE NORMS COMMITTEE-II MEETING No. 04/81-ALC2/2021 DATED 17.06.2020 (Held on 09.07.2020)

Please Note

  • i. For information of exporters, Norms Committee-II handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 72 to 76, 78 to 80, 85. Communications in respect of cases/pertaining to NC-II may be sent to email address: nc2.dgft@nic.in

  • ii. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The concerned applicant/company may go through the same and respond accordingly.

  • iii. Similarly, a scanned copy of the blank Standard Deficiency Format, which may find a reference in NC decisions, has also been attached in the end. This may also be referred to by the concerned applicant/company and may be responded accordingly.

  • iv. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC.

  • v. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less.

Meeting No. 04/81 of Norms Committee-II for the year 2020-21 (Originally scheduled for 17.06.2020) held on 09.07.2020 through Video Conferencing under the Chairmanship of Shri R. P. Goyal, Additional Director General of Foreign Trade to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2015-20. The following members were present in the meeting:-

Sl. No. Name&Designation Department
1. Shri K. S. Sodhi,AD(ME) MSME
2. Shri Devendra KumarSaini,ADG DoT
3. Shri Sushil Kumar Jangid,Scientist „B‟ MeitY
4. ShriShaish Kumar, (TEC-1) Consultant
5. Shri V.C. Agarwal, (TEC-3) Consultant
6. ShriS.K.Bhatnagar, (SKB) Consultant
In attendance
1. Shri Shobhit Gupta,Dy. DGFT DGFT
2. Shri Pranav Upadhyay,Assistant Director DGFT

Draft Minutes of Meeting No. 03/81 scheduled for 27.05.2020 and held on 10.06.2020 were circulated among all the members of the Committee on 03.07.2020. On receipt of comments, the minutes were finalized and uploaded on DGFT‟s website on 07.07.2020. Therefore, the minutes are unanimously approved.

Minutes of the cases discussed in the meeting are as under:

1 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

MEETING NUMBER: 4/81-ALC2/2020 MEETING DATE: 17.06.2020 (Held on 09.07.2020)

Case No.:311/14/81- Party Name: MERSEN Meet No/Date:4/81- Status:
ALC2/2018 INDIA PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710108424 Action by :
:01/81/050/01029/AM19/ :07/24/040/00087/AM16/ 25.06.2015 Applicant

1 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

The case stands deferred.

Case No.:25/14/81- Party Name: SHERA Meet No/Date:4/81- Status:
ALC2/2018 ENERGY PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:1310047931 Action by :
:01/81/050/00743/AM19/ :13/24/040/00002/AM16/ 17.07.2015 Applicant

2 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:312/14/81- Party Name: SAKAR Meet No/Date:4/81- Status:
ALC2/2018 INDUSTRIES LIMITED ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0810135708
:01/81/050/01030/AM19/ :08/24/040/00110/AM16/ 21.07.2015

Decision: The Committee considered the case as per agenda and noted the comments given by DPIIT vide U. O. No.: P-47011/85/2020-TSW dated 22.05.2020. It was noted that the party has applied for import of Aluminium Scrap whereas import item is mentioned as Aluminium Ingots in the DPIIT 3 comments. The matter was deliberated in the meeting and the Committee decided to fix the ad-hoc norms on the basis of inputs given by Technical Authorities present in the meeting as under:

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
76012090 Aluminium Cast,<br>Granulates 100 MT 76020010 Aluminium<br>Scrap 1.05 Kgs/Kg content in<br>the export products.

RA concerned may take suitable consequential action accordingly.

2 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:313/14/81- Party Name: SAKAR Meet No/Date:4/81- Status:
ALC2/2018 INDUSTRIES LIMITED ALC2/2020 Withdrawn
17.06.2020
HQ File RLA File Lic.No/Date:0810135709
:01/81/050/01031/AM19/ :08/24/040/00108/AM16/ 21.07.2015

Decision: The Committee considered the case as per the agenda and noted that the applicant via email dated 17.06.2020 informed that the above AA has been redeemed . Therefore, the Committee decided to withdraw the case from the agenda.

Case is withdrawn.

Case No.:317/14/81- Party Name: VOLEX Meet No/Date:4/81- Status:
ALC2/2018 INTERCONNECT (INDIA) ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0410160894 Action by :
:01/81/050/01035/AM19/ :04/24/040/00112/AM16/ 10.08.2015 Applicant

5 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 30.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

6 Case No.:318/14/81-<br>ALC2/2018 Party Name: GOLDSTONE<br>INFRATECH LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/01036/AM19/ RLA File<br>:09/24/040/00279/AM16/ Lic.No/Date:0910062464<br>11.08.2015 <br>Action by :<br>TEC-1
**Decision:**The Committee considered the case as per the agenda and noted that the applicant‟s reply<br>was sent to Consultant (TEC-1) on 02.07.2020 for examination of the case. However, no comments<br>have been received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

6 Decision: The Committee considered the case as per the agenda and noted that the applicant‟s reply was sent to Consultant (TEC-1) on 02.07.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:322/14/81- Party Name: STERA Meet No/Date:4/81- Status:
ALC2/2018 ENGINEERING INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410160911 Action by :
:01/81/050/01040/AM19/ :04/24/040/00113/AM16/ 13.08.2015 Applicant

7 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 30.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

3 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

8 Case No.:323/14/81-<br>ALC2/2018 Party Name: TRAFOMEC<br>INDIA PVT LTD Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/01041/AM19/ RLA File<br>:07/24/040/00190/AM16/ Lic.No/Date:0710108750<br>21.09.2015 <br>Action by :<br>Applicant
**Decision:**The Committee considered the case as per the agenda and noted that DHI informed via<br>email dated 02.07.2020 that the applicant had not submitted point-wise reply in its letter dated<br>24.01.2020. Therefore, the Committee decided to seek again from the applicant to furnish the point-<br>wise reply of the following deficiencies as per written comments of DHI:<br>1. Complete specification with catalogue of each export product with quantity of export in<br>number.<br>2. Sl. No. 2, 4, 5 & 11 of the Standard Deficiency Format.<br>3. Manufacturing process of export item giving specific use of each import item.<br>The case stands deferred.

Decision: The Committee considered the case as per the agenda and noted that DHI informed via email dated 02.07.2020 that the applicant had not submitted point-wise reply in its letter dated 8 24.01.2020. Therefore, the Committee decided to seek again from the applicant to furnish the pointwise reply of the following deficiencies as per written comments of DHI:

9 Case No.:34/14/81-<br>ALC2/2018 Party Name: ARFIN INDIA<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00752/AM19/ RLA File<br>:08/24/040/00218/AM16/ Lic.No/Date:0810136182<br>06.10.2015 <br>Action by :<br>DPIIT
**Decision:**The Committee considered the case as per the agenda and noted that a copy of application<br>was sent to DPIIT on 29.06.2020 for examination of the case. However, no comments have been<br>received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.
Case No.:9/14/81-ALC2/2018 Party Name: JSONS Meet No/Date:4/81- Status:
FOUNDRY PVT LTD ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3110065856 Action by :
:01/81/050/00727/AM19/ :31/83/040/00141/AM16/ 08.01.2016 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of Consultant (SKB):

  1. What is generic name of export product? What is the chemical composition of the export

10 product?

  1. Detail Technical note on manufacturing process including the relevant flow sheet.

  2. Detail Technical Drawings with dimension of each export product, catalogue, if any, may also be furnished.

  3. Weight of each export product.

  4. Why LC Ferro Chrome of 0.3% and 0.5% are required to be imported. Please provide full justification. What is the effect on export product, if HC Ferro Chrome is allowed in place of LC Ferro Chrome?

  5. Why Ni Cathode and Manganese metal are required for manufacture of export product? What

4 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

  • will be the effect on the quality of export product, if export product is manufactured using Ferro nickel and Ferro Manganese?
  1. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification supported by documentary evidence/drawing etc.
Case No.:353/14/81- Party Name: POWER Meet No/Date:4/81- Status:
ALC2/2018 CONTROL EQUIPMENTS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710109325 Action by :
:01/81/050/01071/AM19/ :07/24/040/00359/AM16/ 29.01.2016 Applicant
  • 11 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.
Case No.:354/14/81- Party Name: POWER Meet No/Date:4/81- Status:
ALC2/2018 CONTROL EQUIPMENTS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710109326 Action by :
:01/81/050/01072/AM19/ :07/24/040/00364/AM16/ 29.01.2016 Applicant
  • 12 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.
Case No.:355/14/81- Party Name: KRISAM Meet No/Date:4/81- Status:
ALC2/2018 AUTOMATION PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710109343 Action by :
:01/81/050/01073/AM19/ :07/24/040/00369/AM16/ 03.02.2016 Applicant
  • 13 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

5 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:344/14/81- Party Name: DC AUTO Meet No/Date:4/81- Status:
ALC2/2018 PARTS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710109432 Action by :
:01/81/050/01062/AM19/ :07/24/040/00313/AM16/ 23.02.2016 Applicant
  • 14 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.
Case No.:359/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) PVT. ALC2/2020 Approved
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710109555
:01/81/050/01077/AM19/ :07/24/040/00409/AM16/ 22.03.2016

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 15 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

Case No.:11/14/81- Party Name: GALLANTT Meet No/Date:4/81- Status:
ALC2/2018 METAL LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002634 Action by :
:01/81/050/00729/AM19/ :37/24/040/00009/AM16/ 04.05.2016 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application 16 has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

17 <br>Case No.:12/14/81-<br>ALC2/2018 Party Name: GALLANTT<br>METAL LTD. Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00730/AM19/ RLA File<br>:37/24/040/00011/AM16/ Lic.No/Date:3710002636<br>04.05.2016 <br>Action by :<br>Applicant
  • 6 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

Case No.:13/14/81- Party Name: GALLANTT Meet No/Date:4/81- Status:
ALC2/2018 METAL LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002637 Action by :
:01/81/050/00731/AM19/ :37/24/040/00012/AM16/ 04.05.2016 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application 18 has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

Case No.:14/14/81- Party Name: GALLANTT Meet No/Date:4/81- Status:
ALC2/2018 METAL LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002638 Action by :
:01/81/050/00732/AM19/ :37/24/040/00013/AM16/ 04.05.2016 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application 19 has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

Case No.:15/14/81- Party Name: GALLANTT Meet No/Date:4/81- Status:
ALC2/2018 METAL LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002639 Action by :
:01/81/050/00733/AM19/ :37/24/040/00014/AM16/ 04.05.2016 Applicant

20 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

7 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:17/14/81- Party Name: GALLANTT Meet No/Date:4/81- Status:
ALC2/2018 METAL LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002642 Action by :
:01/81/050/00735/AM19/ :37/24/040/00008/AM16/ 23.05.2016 Applicant

  • Decision: The Committee considered the case as per the agenda and noted that the copy of application

  • 21 has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 06.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application along with reply of deficiencies as raised by Consultant (SKB) in Meeting No. 01/81 dated 01.04.2020.

Case No.:19/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710109940
:01/81/050/00737/AM19/ :07/24/040/00047/AM17/ 14.06.2016

  • Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as

  • 22 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

Case No.:42/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710110268
:01/81/050/00760/AM19/ :07/24/040/00134/AM17/ 17.08.2016

  • Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as

  • 23 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

8 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:150/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710110362
:01/81/050/00868/AM19/ :07/24/040/00176/AM17/ 02.09.2016

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 24 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

Case No.:151/14/81- Party Name: LDSQUARE Meet No/Date:4/81- Status:
ALC2/2018 TECHNOLOGIES INDIA ALC2/2020 Withdrawn
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710110363
:01/81/050/00869/AM19/ :07/24/040/00177/AM17/ 02.09.2016

Decision: The Committee considered the case as per the agenda and noted that the applicant informed via email dated 10.06.2020 that they have paid the duty with applicable interest and closed the AA. Therefore, the Committee decided to withdraw the case from the agenda.

Case is withdrawn.

Case No.:172/14/81- Party Name: GAYATRI Meet No/Date:4/81- Status:
ALC2/2018 BATTERIES PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710110561 Action by :
:01/81/050/00890/AM19/ :07/24/040/00221/AM17/ 24.10.2016 Applicant

26 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 07.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:33/14/81- Party Name: DIANA<br>Meet No/Date:4/81-<br>Status:
ALC2/2018 METALS<br>ALC2/2020<br>Deferred
17.06.2020
27 HQ File<br>:01/81/050/00751/AM19/ <br>RLA File<br>:04/24/040/00136/AM17/<br>Lic.No/Date:0410162477<br>08.11.2016<br>Action by :<br>Applicant
**Decision:**The Committee considered the case as per the agenda and noted that the copy of application
has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019
followed byreminders on 30.03.2020 & 07.06.2020. However,no information has been receivedyet.

9 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:184/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710110630
:01/81/050/00902/AM19/ :07/24/040/00238/AM17/ 09.11.2016

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 28 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

Case No.:193/14/81- Party Name: SUNSHINE Meet No/Date:4/81- Status:
ALC2/2018 EXTRUSIONS INDIA P. ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710110703 Action by :
:01/81/050/00911/AM19/ :07/24/040/00258/AM17/ 29.11.2016 Applicant

29 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by reminders on 31.03.2020 & 07.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:345/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710110836
:01/81/050/01063/AM19/ :07/24/040/00313/AM17/ 23.12.2016

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 30 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

10 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:347/14/81- Party Name: TRAFOMEC Meet No/Date:4/81- Status:
ALC2/2018 INDIA PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710110958 Action by :
:01/81/050/01065/AM19/ :07/24/040/00329/AM17/ 12.01.2017 Applicant

Decision: The Committee considered the case as per the agenda and noted that DHI informed via email dated 02.07.2020 that the applicant had not submitted point-wise reply in its letter dated 31 24.01.2020. Therefore, the Committee decided to seek again from the applicant to furnish the pointwise reply of the following deficiencies as per written comments of DHI:

  1. Complete specification with catalogue of each export product with quantity of export in number.

  2. Sl. No. 2, 4, 5 & 11 of the Standard Deficiency Format.

  3. Manufacturing process of export item giving specific use of each import item.

Case No.:349/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710111078
:01/81/050/01067/AM19/ :07/24/040/00315/AM17/ 06.02.2017

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 32 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

Case No.:357/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710111264
:01/81/050/01075/AM19/ :07/24/040/00383/AM17/ 09.03.2017

  • Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as

  • 33 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

11 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:44/14/81- Party Name: VELOX Meet No/Date:4/81- Status:
ALC2/2018 AUTOMATION PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:5210042215 Action by :
:01/81/050/00762/AM19/ :52/24/040/00085/AM17/ 15.03.2017 Applicant
  • 34 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 07.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.
Case No.:48/14/81- Party Name: AMC Meet No/Date:4/81- Status:
ALC2/2018 COOKWARE (INDIA) ALC2/2020 Approved
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710111502
:01/81/050/00766/AM19/ :07/24/040/00016/AM18/ 28.04.2017

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 35 per written comments given by DPIIT vide U. O. No.: P-47011/189/2019-TSW dated 30.06.2020. (Copy enclosed)

Note:

1. Grade of steel to match in import & export.

2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.

36 Case No.:55/14/81-<br>ALC2/2018 Party Name: ABB INDIA<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00773/AM19/ RLA File<br>:07/24/040/00081/AM18/ Lic.No/Date:0710111752<br>14.06.2017 <br>Action by :<br>Applicant
<br>**Decision:**The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per written comments of DHI:<br>1. To indicate Item no of import where CRGO is proposed to be imported and any wastage on<br>the same.<br>2. Sl. No 5, 8 &11 of SDF.<br>3. Specific use/write up of item No. 17 and the placement of the export product.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 36 furnish following information as per written comments of DHI:

37 <br>Case No.:68/14/81-<br>ALC2/2018 Party Name: SPIRAL EHL<br>ENGINEERING PRIVATE<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00786/AM19/ RLA File<br>:07/24/040/00002/AM18/ Lic.No/Date:0710111807<br>22.06.2017 <br>Action by :<br>Section

12 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Decision: The Committee considered the case as per agenda and noted that the applicant was allowed to attend personal hearing via video conferencing. However, the applicant via email dated 08.07.2020 requested for another date of personal hearing. Therefore, the Committee decided to call again the applicant for Personal Hearing in the forthcoming NC meeting.

Case No.:62/14/81- Party Name: D.V. Meet No/Date:4/81- Status:
ALC2/2018 INTERNATIONAL ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510403617 Action by :
:01/81/050/00780/AM19/ :05/23/040/00183/AM18/ 08.08.2017 Applicant

38 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 31.03.2020 & 07.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:63/14/81- Party Name: R. K. STEEL Meet No/Date:4/81- Status:
ALC2/2018 MANUFACTURING ALC2/2020 Deferred
COMPANY PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410163442 Action by :
:01/81/050/00781/AM19 :04/24/040/00101/AM18/ 18.08.2017 Applicant

39 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by reminders on 30.03.2020 & 07.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

40 Case No.:244/14/81-<br>ALC2/2018 Party Name: BHARAT<br>HEAVY ELECTRICALS<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00962/AM19/ RLA File<br>:07/21/040/00316/AM18/ Lic.No/Date:0710112108<br>07.09.2017 <br>Action by :<br>DHI
<br>**Decision:**The Committee considered the case as per the agenda and noted that the applicant‟s reply<br>was sent to DHI on 29.06.2020 for examination of the case. However, no comments have been<br>received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.

13 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:66/14/81- Party Name: KIRAN Meet No/Date:4/81- Status: ALC2/2018 UDYOG ALC2/2020 Approved 17.06.2020 HQ File RLA File Lic.No/Date:0910065531 :01/81/050/00784/AM19/ :09/24/040/00321/AM18/ 05.10.2017

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 41 per written comments given by Consultant (TEC-1) as under:

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
85461000 Fibre Glass Tape 18000 Kgs 70191900 Fibre Glass<br>Yarn As applied@ 1.03<br>Kgs/Kg content in the<br>exportproduct
Case No.:67/14/81- Party Name: KIRAN UDYOG Meet No/Date:4/81- Status:
ALC2/2018 ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0910065532 Action by :
:01/81/050/00785/AM19/ :09/24/040/00320/AM18/ 05.10.2017 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 42 furnish following information as per advice of Consultant (TEC-1):

  1. Manufacturing process in detail indicating wastage claimed for each of input.

  2. Details of indigenous input with quantity, if any.

  3. Exact chemical name of import item at Sl. No. 2 and 3 with catalogue.

  4. Net content of silicone rubber and fiber glass in export.

Case No.:152/14/81- Party Name: SAPA Meet No/Date:4/81- Status:
ALC2/2018 EXTRUSION INDIA ALC2/2020 Approved
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710112266
:01/81/050/00870/AM19/ :07/24/040/00182/AM18/ 12.10.2017

43 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by DPIIT vide U. O. No.: P-47011/297/2019-TSW dated 09.07.2020 as under:

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
76109030 Relevant<br>Alumunium<br>Profiles 980392<br>Kgs 76012020 Unwrough Aluminium Billets<br>Alloy 6005,6061,6063-<br>6kpm.6a Diameter:<br>203MMX5800MM As applied<br>i.e. 1000 MT<br>inclusive of 2%<br>wastage on net<br>contents
Note: Import item shall be of relevant grade and composition as contained/utilized in the export
item.

14 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:148/14/81- Party Name: DC AUTO Meet No/Date:4/81- Status:
ALC2/2018 PARTS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710112309 Action by :
:01/81/050/00866/AM19/ :07/24/040/00168/AM18/ 26.10.2017 Applicant
  • 44 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 07.06.2020. However, the the email was undelivered to the applicant due to incorrect email ID. Therefore, the Committee decided to ask form the RA, Bangalore to provide email ID of the applicant and also submit the complete set of application for examination of the case.
45 Case No.:183/14/81-<br>ALC2/2018 Party Name: ABB INDIA<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00901/AM19/ RLA File<br>:07/24/040/00231/AM18/ Lic.No/Date:0710112554<br>19.12.2017 <br>Action by :<br>Applicant
<br>**Decision:**The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per written comments of DHI:<br>1. Appendix 11A of application giving wastage sought.<br>2. Sl. No. 11 of SDF for each raw material.<br>3. To indicate Item no of import where CRGO is proposed to be imported and any wastage on the<br>same.<br>4. Complete specification items proposed for import with its use separately for each item, like<br>item No. 120, 223 to 233, 234, 235, 264, 271 etc..<br>The case stands deferred.
  • 45
Case No.:104/14/81- Party Name: COSMOS Meet No/Date:4/81- Status:
ALC2/2018 ENGITECH PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3410043767 Action by :
:01/81/050/00822/AM19/ :34/24/040/00229/AM18/ 01.01.2018 Applicant

Decision: The Committee considered the case as per the agenda and Consultant (TEC-3) informed 46 that the applicant‟s reply dated 15.06.2020 is deficient as it did not contain the details of export products. Therefore, the Committee decided to seek again from the applicant to furnish the following information:

  1. Details of export products.

15 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:195/14/81- Party Name: FCI OEN Meet No/Date:4/81- Status:
ALC2/2018 CONNECTORS LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710112641 Action by :
:01/81/050/00913/AM19/ :07/24/040/00257/AM18/ 04.01.2018 Applicant

47 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:216/14/81- Party Name: APAR Meet No/Date:4/81- Status:
ALC2/2018 INDUSTRIES LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3410043787 Action by :
:01/81/050/00934/AM19/ :34/24/040/00270/AM18/ 08.01.2018 TEC-3

48 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (TEC-3) on 29.06.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:74/14/81- Party Name: SAKAR Meet No/Date:4/81- Status:
ALC2/2018 INDUSTRIES PVT. ALC2/2020 Approved
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0810141768
:01/81/050/00792/AM19/ :08/24/040/00231/AM18/ 12.01.2018

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by DPIIT vide U. O. No.: P-47011/85/2020-TSW dated 22.05.2020. The matter was deliberated in the meeting and it was noted that the committee allows lower wastage where the input is Aluminium ingots as compared to the wastage where the input is Aluminium Scrap. 49 Therefore the Committee decided to fix the ad-hoc norms on the basis of inputs given by Technical Authorities present in the meeting as under:

ITCHS<br>Code Export<br>Item Quantity ITCHS<br>Code Import Item Recommended Quantity
76012090 Aluminium<br>Cast<br>Granulates 1800<br>MT 76011010 Remelted Aluminium<br>Ingots / Aluminium<br>Ingots 1.02 Kgs/Kg content in<br>the export products.
Case No.:373/14/81- Party Name: ACCIONA Meet No/Date:4/81- Status:
ALC2/2018 WINDPOWER INDIA ALC2/2020 Deferred
50 PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710112807 Action by :
:01/81/050/01091/AM19/ :07/24/040/00300/AM18/ 09.02.2018 Applicant

16 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 12.03.2020 followed by a reminder on 12.06.2020. It was also noted that, on request of the applicant, a copy of deficiency letter was again sent on 15.06.2020. The applicant via email dated 16.06.2020 sought some more time to furnish the reply. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:364/14/81- Party Name: GAVIRANGA Meet No/Date:4/81- Status:
ALC2/2018 ENTERPRISES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710112827 Action by :
:01/81/050/01082/AM19/ :07/24/040/00318/AM18/ 14.02.2018 Applicant

51 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:365/14/81- Party Name: GAVIRANGA Meet No/Date:4/81- Status:
ALC2/2018 ENTERPRISES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710112828 Action by :
:01/81/050/01083/AM19/ :07/24/040/00319/AM18/ 14.02.2018 Applicant

52 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:366/14/81- Party Name: GAYATHRI Meet No/Date:4/81- Status:
ALC2/2018 BATTERIES PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710112878 Action by :
:01/81/050/01084/AM19/ :07/24/040/00311/AM18/ 26.02.2018 Applicant

53 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

17 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:73/5/81-ALC2/2018 Party Name: LM WIND Meet No/Date:4/81- Status:
POWER BLADES [INDIA] ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3410043923 Action by :
:01/81/050/00281/AM19/ :34/24/040/00350/AM18/ 27.02.2018 Applicant

54 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 12.03.2020 followed by a reminder on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

Case No.:367/14/81- Party Name: ACCIONA Meet No/Date:4/81- Status:
ALC2/2018 WINDPOWER INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710112930 Action by :
:01/81/050/01085/AM19/ :07/24/040/00337/AM18/ 06.03.2018 Applicant

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking 55 certain information as raised by Consultant (TEC-1) was sent to the applicant on 12.03.2020 followed by a reminder on 12.06.2020. It was also noted that, on request of the applicant, a copy of deficiency letter was again sent on 15.06.2020. The applicant via email dated 16.06.2020 sought some more time to furnish the reply. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:369/14/81- Party Name: SAPA Meet No/Date:4/81- Status:
ALC2/2018 EXTRUSION INDIA ALC2/2020 Approved
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710112996
:01/81/050/01087/AM19/ :07/24/040/00316/AM18/ 21.03.2018
**Decision:**The Committee considered the case as per agenda and decided to fix the the case as per agenda and decided to fix the ad-hoc norms on ad-hoc norms on
repeat basis as approved for AA No. 0710115051 dated 13.06.2019 in meeting No. 17/81 dated
27.11.2019 as under:
56 ITCHS<br>Code<br>Export Item Quantity ITCHS<br>Code<br>Import Item Recommended<br>Quantity
Unwrought Aluminium 2% wastage
76109030<br>Relevant<br>Alumunium<br>Profiles<br>1960784<br>Kgs 76012020<br>Billets, Aluminium Ingots<br>ALLOY 6005, 6005.02, 6061,<br>6061.016063- 6kpm.6a<br>DIAMETER: 203MM X allowed on net<br>content
5800MM
Note: Import item shall be of relevant grade and composition as contained/utilized in the export
item.
RA concerned maytake suitable consequential action accordingly.

18 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:370/14/81- Party Name: SAPA Meet No/Date:4/81- Status:
ALC2/2018 EXTRUSION INDIA ALC2/2020 Approved
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710112999
:01/81/050/01088/AM19/ :07/24/040/00315/AM18/ 21.03.2018
ALC2/2018<br>EXTRUSION INDIA<br>PRIVATE LIMITED<br>ALC2/2020<br>17.06.2020<br>Approved<br>HQ File<br>:01/81/050/01088/AM19/<br>RLA File<br>:07/24/040/00315/AM18/<br>Lic.No/Date:0710112999<br>21.03.2018 ALC2/2018<br>EXTRUSION INDIA<br>PRIVATE LIMITED<br>ALC2/2020<br>17.06.2020<br>Approved<br>HQ File<br>:01/81/050/01088/AM19/<br>RLA File<br>:07/24/040/00315/AM18/<br>Lic.No/Date:0710112999<br>21.03.2018 ALC2/2018<br>EXTRUSION INDIA<br>PRIVATE LIMITED<br>ALC2/2020<br>17.06.2020<br>Approved<br>HQ File<br>:01/81/050/01088/AM19/<br>RLA File<br>:07/24/040/00315/AM18/<br>Lic.No/Date:0710112999<br>21.03.2018 ALC2/2018<br>EXTRUSION INDIA<br>PRIVATE LIMITED<br>ALC2/2020<br>17.06.2020<br>Approved<br>HQ File<br>:01/81/050/01088/AM19/<br>RLA File<br>:07/24/040/00315/AM18/<br>Lic.No/Date:0710112999<br>21.03.2018
**Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as
per written comments given by DPIIT vide U. O. No.: P-47011/297/2019-TSW dated 09.07.2020 as
under:
57 ITCHS<br>Code<br>Export Item QuantityITCHS<br>Code<br>Import Item Recommended<br>Quantity
Unwrought Aluminium As applied
76042100<br>Alumunium<br>Hollow<br>Profiles<br>980392<br>Kgs<br>76012020<br>Billets, Aluminium Ingots<br>Alloy 6005, 6005.02, 6061,<br>6061.016063- 6kpm.6a i.e. 1000 MT<br>inclusive of 2%<br>wastage on net
Diameter: 203MMX5800MM content
Note: Import item shall be of relevant grade and composition as contained/utilized in the export
item.
RA concerned maytake suitable consequential action accordingly.
Case No.:371/14/81- Party Name: ADHESIVE Meet No/Date:4/81- Status:
ALC2/2018 SPECIALITIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710113008 Action by :
:01/81/050/01089/AM19/ :07/24/040/00351/AM18/ 22.03.2018 Applicant

58 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:121/14/81- Party Name: APAR Meet No/Date:4/81- Status:
ALC2/2018 INDUSTRIES LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3410044075 Action by :
59 :01/81/050/00839/AM19/<br>:34/24/040/00017/AM19/<br>24.04.2018<br>TEC-3<br>**Decision:**The Committee considered the case as per the agenda and noted that a copy of application
was sent to Consultant (TEC-3) on 29.06.2020. However, no comments have been received yet.
Hence, the Committee decided to wait for the comments.
The case stands deferred.
Case No.:103/14/81- Party Name: LM WIND Meet No/Date:4/81- Status:
ALC2/2018 POWER BLADES INDIA ALC2/2020 Deferred
60 PVT. LTD. 17.06.2020
HQFile RLA File Lic.No/Date:3410044165 Action by :

19 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

:01/81/050/00821/AM19/ :34/24/040/00065/AM19/

23.05.2018

Applicant

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 27.01.2020 followed by a reminder on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

61 Case No.:92/14/81-<br>ALC2/2018 Party Name: ABB INDIA<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
HQ File<br>:01/81/050/00810/AM19/ RLA File<br>:07/24/040/00050/AM19/ Lic.No/Date:0710113375<br>01.06.2018 <br>Action by :<br>Applicant
<br>**Decision:**The Committee considered the case as per agenda and decided to seek from the applicant to<br>furnish following information as per written comments of DHI:<br>1. Sl. No. 4, 5 & 11 of SDF, for each raw material.<br>2. To indicate item No. of import where CRGO is proposed to be imported and any wastage<br>on the same.<br>3. Complete specification components proposed for import with its use separately for each<br>item.<br>The case stands deferred.

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of DHI: 61

Case No.:108/14/81- Party Name: LM WIND Meet No/Date:4/81- Status:
ALC2/2018 POWER BLADES INDIA ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3410044263 Action by :
:01/81/050/00826/AM19/ :34/24/040/00075/AM19/ 19.06.2018 Applicant

62 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 27.01.2020 followed by a reminder on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

Case No.:161/14/81- Party Name: TUBACEX Meet No/Date:4/81- Status:
ALC2/2018 PRAKASH INDIA PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310821783 Action by :
:01/81/050/00879/AM19/ :03/95/040/00260/AM19/ 20.06.2018 Applicant

63 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by a reminder on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

20 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:71/8/81-ALC2/2018 Party Name: LM WIND Meet No/Date:4/81- Status:
POWER BLADES INDIA ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3410044297 Action by :
:01/81/050/00453/AM19/ :34/24/040/00117/AM19/ 02.07.2018 Applicant

64 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 27.01.2020 followed by a reminder on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind again the applicant for furnishing the requisite information.

Case No.:120/14/81- Party Name: ACCIONA Meet No/Date:4/81- Status:
ALC2/2018 WINDPOWER INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710113621 Action by :
:01/81/050/00838/AM19/ :07/24/040/00099/AM19/ 23.07.2018 TEC-1

65 Decision: The Committee considered the case as per the agenda and noted that the applicant‟s reply was sent to Consultant (TEC-1) on 16.06.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-1) for expediting the comments.

Case No.:128/14/81- Party Name: KIRAN UDYOG Meet No/Date:4/81- Status:
ALC2/2018 ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0910066574 Action by :
:01/81/050/00846/AM19/ :09/24/040/00234/AM19/ 17.08.2018 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 66 furnish following information as per advice of Consultant (TEC-1):

  1. Manufacturing process in detail indicating wastage claimed for each of input.

  2. Details of indigenous input with quantity, if any.

  3. Exact chemical name of import item at Sl. No. 2 and 3 with catalogue.

  4. Net content of silicone rubber and fiber glass in export.

Case No.:245/14/81- Party Name: BHUJ Meet No/Date:4/81- Status:
ALC2/2018 POLYMERS PVT. LTD. ALC2/2020 Approved
17.06.2020
67 HQ File<br>:01/81/050/00963/AM19/ RLA File<br>:37/24/040/00001/AM19/ Lic.No/Date:3710002714<br>12.10.2018
**Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as
per written comments given by DPIIT vide U. O. No.: P-47011/42/2020-TSW dated 20.02.2020 as
under:

21 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020
ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
79040030 ZINC WIRE 500 MT 79011100 Special High-<br>Grade Zinc<br>Ingot As applied<br>i.e. 504.20 MT<br>inclusive of<br>0.84% wastage
RA concerned maytake suitable consequential action accordingly.
Case No.:177/14/81- Case No.:177/14/81- Party Name: GOLDSTONE<br>Meet No/Date:4/81- Status:
ALC2/2018 INFRATECH LIMITED<br>ALC2/2020 Deferred
17.06.2020
HQ File RLA File<br>Lic.No/Date:0910066766 Action by :
:01/81/050/00895/AM19/ :09/24/040/00315/AM19/<br>25.10.2018 Applicant
**Decision:**The Committee considered the case as per agenda. Consultant (TEC-1) informed that
material balance for rubber compound given in earlier letter dated 17.02.2020 is not in confirmation of
the rubber compound weight given in the letter dated 22.05.2020, the details are as under:
Rating of Qty Required of Rubber Comp Item (Item<br>Net Weight of Rubber
Insulator No.1 To 4)Per PieceVide Letter dt.17.02.2020<br>PartPer Piece In Export
15KV 0.232 Kg 0.299Kg
28 KV 0.319Kg 0.316 Kg
25kv 0.460Kg 0.457 Kg
30 KV 0.503 Kg 0.500 Kg
Therefore, the Committee decided to seek a clarification from the applicant in this regard.
The case stands deferred.
Case No.:177/14/81- Case No.:177/14/81- Party Name: GOLDSTONE<br>Meet No/Date:4/81- Status:
ALC2/2018 INFRATECH LIMITED<br>ALC2/2020 Deferred
17.06.2020
HQ File RLA File<br>Lic.No/Date:0910066766 Action by :
:01/81/050/00895/AM19/ :09/24/040/00315/AM19/<br>25.10.2018 Applicant
**Decision:**The Committee considered the case as per agenda. Consultant (TEC-1) informed that
material balance for rubber compound given in earlier letter dated 17.02.2020 is not in confirmation of
the rubber compound weight given in the letter dated 22.05.2020, the details are as under:
Rating of Qty Required of Rubber Comp Item (Item<br>Net Weight of Rubber
Insulator No.1 To 4)Per PieceVide Letter dt.17.02.2020<br>PartPer Piece In Export
15KV 0.232 Kg 0.299Kg
28 KV 0.319Kg 0.316 Kg
25kv 0.460Kg 0.457 Kg
30 KV 0.503 Kg 0.500 Kg
Therefore, the Committee decided to seek a clarification from the applicant in this regard.
The case stands deferred.
Case No.:179/14/81- Party Name: GAVIRANGA Meet No/Date:4/81- Status:
ALC2/2018 ENTERPRISES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710114087 Action by :
:01/81/050/00897/AM19/ :07/24/040/00190/AM19/ 01.11.2018 Applicant

69 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:96/8/81-ALC2/2018 Party Name: LM WIND Meet No/Date:4/81- Status:
POWER BLADES INDIA ALC2/2020 Rejected
PVT. LTD. 17.06.2020
70 HQ File RLA File Lic.No/Date:3410044677
:01/81/050/00478/AM19/ :34/24/040/00249/AM19/ 09.11.2018
**Decision:**The Committee considered the case asper agenda and noted that a deficiencyletter seeking

22 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

certain information as raised by Consultant (TEC-1) was sent to the applicant on 28.12.2018 followed by reminders on 01.06.2019, 14.08.2019, 10.12.2019 & 07.06.2020. However, no reply has been received yet. Hence, the Committee decided to reject the case under intimation to RA, Vadodara.

Case No.:200/14/81- Party Name: MAHADEVA Meet No/Date:4/81- Status:
ALC2/2018 MULTI TECH ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710114258 Action by :
:01/81/050/00918/AM19/ :07/24/040/00218/AM19/ 12.12.2018 Applicant

71 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:297/14/81- Party Name: BOMAFA Meet No/Date:4/81- Status:
ALC2/2018 SPECIAL VALVE ALC2/2020 Deferred
SOLUTIONS PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0810144141 Action by :
:01/81/050/01015/AM19/ :08/24/040/00258/AM19/ 20.12.2018 DHI

72 Decision: The Committee considered the case as per the agenda and noted that DPIIT informed vide U. O. No.: P-47011/35/2020-TSW dated 27.02.2020 that the case does not pertains to it and may be consulted with DHI. The copy of application was referred to DHI on 02.07.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:215/14/81- Party Name: WAAREE Meet No/Date:4/81- Status:
ALC2/2018 ENERGIES LTD. ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:5210042877
:01/81/050/00933/AM19/ :52/24/040/00070/AM19/ 20.12.2018

Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms as per written comments given by Consultant (TEC-3) as under:

7

3 Export Items:

Export Items: Export Items:
Sl. No.<br>ITCHS Code<br>Export Item Quantity
1.<br>85414011<br>Solar Modules 320WP-365WP (Weight<br>Kg/Module) 22.5<br>135616 Numbers
Import Items:
Sl.<br>No.<br>ITCHS<br>Code Import Item Recommended Quantity
1<br>85414011 Solar Cell For Solar PV Modules Mono PERC Net + 1% wastage

23 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Solar Cell, Efficiency: 21.5% And Above<br>5.25WP
2 70071900 Solar Glass For Solar PV Module, ARC<br>1955x985x 3.2mm As per GN-4
3 76041031 Aluminium Frame For Solar PV<br>Module,1960x990mm As per GN-4
4 39013000 EVASheet ForSolar PVModule, 0.45x985mm Net +0.5% wastage
5 39206290 Backsheet For Solar PV Module 990 Mm. Net + 0.5% wastage
6 74081990 Solar Ribbon For Solar PV Module, 0.9mm x<br>0.25mm As applied(Combined Value<br>of item No. 6, 7 and 9<br>restricted upto 2% of FoB<br>value)
7 74081990 Solar Bus Bar For Solar PV Module, 5mm x<br>0.40mm. As applied(Combined Value<br>of item No. 6, 7 and 9<br>restricted upto 2% of FoB<br>value)
8 85369030 PV Junction Box For Solar PV Module. Asper GN-4
9 35061000 RTV For Solar PV Module (Silicone Sealant) As applied(Combined Value<br>of item No. 6, 7 and 9<br>restricted upto 2% of FoB<br>value)
Note:<br>1. The following words “Weight 22.5 Kg/Module” may be added in the description of the<br>export product.<br>2. Export item will contain 72 imported cells per module.<br>3. Specification and wattage of imported cells will be same as used in export items. The RA<br>will obtain specification/wattage of the cells to be imported and would endorse the same on<br>the authorization both for export and import products.<br>RA concerned maytake suitable consequential action accordingly.

Note:

1. The following words “Weight 22.5 Kg/Module” may be added in the description of the export product.

2. Export item will contain 72 imported cells per module.

3. Specification and wattage of imported cells will be same as used in export items. The RA will obtain specification/wattage of the cells to be imported and would endorse the same on the authorization both for export and import products.

Case No.:224/14/81- Party Name: JINDAL Meet No/Date:4/81- Status:
ALC2/2018 ALUMINIUM LTD. ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0710114342
:01/81/050/00942/AM19/ :07/24/040/00211/AM19/ 31.12.2018

Decision: The Committee considered the case as per agenda and noted the matter was discussed in Policy Interpretation Committee in its meeting held on 9.6.2020. PIC has observed that while deciding the norms, the essentiality of the import is one of the main factors. Inputs are allowed on the 7 basis of essentiality and not on the basis of cheaper availability. Each case is examined by the 4 Committee taking into consideration of all relevant factors. If an item asked by the applicant is not required, the norms committee should allow the relevant item only. In this case, „Aluminium Cast Strip‟ is not an essential/ primary raw material for manufacturing „Rolled Aluminium Sheets‟. Hence, the Norms Committee may decide the case accordingly. The Committee further noted that vide its letter dated 11.6.2020, the applicant has requested to allow import of ingots as against strips.

Therefore, the Committee decided to fix the ad-hoc norms as per written comments dated 08.07.2019 given by Consultant (TEC-3) as under:

24 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

ITCHS<br>Code<br>Export<br>Item<br>Quantity<br>ITCHS<br>Code<br>Import Item Recommended<br>Quantity
76061200<br>Rolled<br>Aluminium<br>Sheets<br>4000000.000<br>Kgs<br>76011090<br>Primary Aluminium<br>Ingots in the form of<br>Pigs/Sows/Slabs/T-<br>Bars. 1.02 Kgs/Kg<br>content in the<br>export product
Note: Description & quantity of import item may be allowed as per SION C-29.
RA concerned maytake suitable consequential action accordingly.
Case No.:225/14/81- Party Name: TRASCCON Meet No/Date:4/81- Status:
ALC2/2018 INTERCONNECTION ALC2/2020 Deferred
SYSTEMS PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710114349 Action by :
:01/81/050/00943/AM19/ :07/24/040/00209/AM19/ 01.01.2019 Applicant

75 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:258/14/81- Party Name: BHUJ Meet No/Date:4/81- Status:
ALC2/2018 POLYMERS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3710002724 Action by :
:01/81/050/00976/AM19/ :37/24/040/00004/AM19/ 28.01.2019 Applicant

76 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per written comments given by DPIIT vide U. O. No.: P-47011/42/2020-TSW dated 20.02.2020:

  1. Sl. No. 3, 4, 5 & 11 of the Standard Deficiency Format.
Case No.:275/14/81- Party Name: SCHWEITZER Meet No/Date:4/81- Status:
ALC2/2018 ENGINEERING ALC2/2020 Deferred
LABORATORIES PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0510409583 Action by :
:01/81/050/00993/AM19/ :05/24/040/00625/AM19/ 05.02.2019 MeitY

77 Decision: The Committee considered the case as per agenda and noted that the applicant directly sent reply of deficiency letter to MeitY on 07.05.2020. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.

25 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:49/2/81-ALC2/2019 Party Name: VESTAS WIND Meet No/Date:4/81- Status:
TECHNOLOGY INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410165242 Action by :
:01/81/050/01135/AM19/ :04/24/040/00259/AM19/ 22.02.2019 Applicant

Decision: The Committee considered the case as per agenda and Consultant (TEC-1) informed that 78 the applicant‟s reply dated 18.03.2020 is deficient as material balance per unit is not matching with individual and total import indicating in the license. Therefore, the Committee decided to seek again from the applicant to furnish the following information as per advice of Consultant (TEC-1):

  1. Material balance per unit and corresponding total export and individual total import.

  2. Material balance sheet should be strictly as per Sl. No. of import in the license.

Case No.:24/5/81-ALC2/2019 Party Name: VESTAS WIND Meet No/Date:4/81- Status:
TECHNOLOGY INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410165342 Action by :
:01/81/050/00073/AM20/ :04/24/040/00283/AM19/ 21.03.2019 Applicant

Decision: The Committee considered the case as per agenda and Consultant (TEC-1) informed that 79 the applicant‟s reply dated 18.03.2020 is deficient as material balance per unit is not matching with individual and total import indicating in the license. Therefore, the Committee decided to seek again from the applicant to furnish the following information as per advice of Consultant (TEC-1):

  1. Material balance per unit and corresponding total export and individual total import.

  2. Material balance sheet should be strictly as per Sl. No. of import in the license.

Case No.: Party Name: JINDAL Meet No/Date:4/81- Status:
90/2/81-ALC2/2019 ALUMINIUM LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710114696 Action by
:01/81/050/01176/AM19/ :07/24/040/00269/AM19/ 22.03.2019 : TEC-3

Decision: The Committee considered the case as per agenda and noted the matter was discussed in Policy Interpretation Committee in its meeting held on 9.6.2020. PIC observed that while deciding the norms, the essentiality of the import is one of the main factors. Inputs are allowed on the basis of 80 essentiality and not on the basis of cheaper availability. Each case is examined by the Committee taking into consideration of all relevant factors. If an item asked by the applicant is not required, the norms committee should allow the relevant item only. In this case, „Aluminium Cast Strip‟ is not an essential/ primary raw material for manufacturing „Rolled Aluminium Sheets‟. Hence, the Norms Committee may decide the case accordingly.

In view of PIC comments, the Committee decided to refer the matter to Consultant (TEC-3) for examination of the case.

26 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

81 Case No.:<br>12/3/81-ALC2/2019 Party Name: VIKARSH<br>STAMPINGS INDIA PVT.<br>LTD. Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00032/AM20/ RLA File<br>:31/83/040/00007/AM20/ Lic.No/Date:3110067393<br>24.04.2019 Action by :<br>Applicant
<br>**Decision:**The Committee considered the case as per the agenda and noted that the copy of application<br>has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019<br>followed by a reminder on 31.03.2020. However, no information has been received yet. Therefore, the<br>Committee decided to remind again the applicant for submitting the complete set of application.<br>The case stands deferred.
Case No.:14/3/81- Party Name: SIECHEM Meet No/Date:4/81- Status:
ALC2/2019 TECHNOLOGIES ALC2/2020 Approved
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410165518
:01/81/050/00034/AM20/ :04/24/040/00012/AM20/ 26.04.2019

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 8 per written comments dated 25.02.2020 given by Consultant (TEC-3) as under: 2

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
85444999 Earthing Cable<br>(Copper Conductor)<br>1C X 50 Sq.MM 22000<br>Meters 74081190 8mm Continuous<br>Cast Copper Rod 1.01Kgs/Kg content<br>in the export<br>product
Case No.:21/3/81-ALC2/2019 Party Name: VESTAS WIND Meet No/Date:4/81- Status:
TECHNOLOGY INDIA ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410165523 Action by :
:01/81/050/00041/AM20/ :04/24/040/00017/AM20/ 30.04.2019 Applicant

Decision: The Committee considered the case as per agenda and Consultant (TEC-1) informed that 83 the applicant‟s reply dated 18.03.2020 is deficient as material balance per unit is not matching with individual and total import indicating in the license. Therefore, the Committee decided to seek again from the applicant to furnish the following information as per advice of Consultant (TEC-1):

  1. Material balance per unit and corresponding total export and individual total import.

  2. Material balance sheet should be strictly as per Sl. No. of import in the license.

27 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:9/5/81-ALC2/2019 Party Name: JINDAL SAW Meet No/Date:4/81- Status: LIMITED ALC2/2020 Approved 17.06.2020 HQ File RLA File Lic.No/Date:0510410481 :01/81/050/00058/AM20/ :05/23/040/00055/AM20/ 06.05.2019

==> picture [472 x 519] intentionally omitted <==

----- Start of picture text -----<br> Decision: The Committee considered the case as per the agenda and decided to fix the ad-hoc norms,<br>on the basis of study group report/proposal recommended, as per written comments given by<br>Consultant (TEC-3) as under:<br>Export Items:<br>Sl. ITCHS<br>Export Item Quantity<br>No. Code<br>Carbon Steel HSAW Coated Pipe 32” to 64”OD X THK 7.14MM to<br>12.70MM, API 5L GradeX52 PSL2, 106405 MTR Wt. 32296.753MT<br>Carbon Steel HSAW Externally 3LPE & Internally Liquid Epoxy<br>106405<br>1. 73051129 Coated Pipe 32” to 64”OD X THK 7.14MM to 12.70 MM, API 5L<br>Meter<br>GradeX52 PSL2, 106405.000 MTR Wt. 32296.753 MT<br>Coating thickness (i) Adhesive 280 Micron (ii) Polyethylene 2760<br>Micron & coating area 419674.766 Sq. mtr<br>Import Items:<br>Sl. ITCHS Recommended Quantity<br>Import Item<br>No. Code<br>8<br>4 Non-Alloy HR Coils/Plates 1.05 MT/MT content in<br>1 72000000<br>the export product<br>2 72299021 Welding Wire As applied<br>3 38109090 Welding Flux (Misc. Item) All Grades As applied (Value upto<br>X-Ray Film (Misc. Item) With All Size/Total 1.5% of FoB value)<br>4 37019990 Industrial X-Ray Film (Misc. Items) All Size/Total<br>5140 M2.<br>CO2 Wire (Misc. Item)/Wire Electrode/ Mig Wire<br>5 72299021<br>All Size/Grades<br>6 72051000 Steel Shots & Grits (Misc. Item) (All Grade)<br>7 39011000 Adhesive (LDPE/ LLDPE) (All Grade/ All Type) As applied<br>8 39012000 Polyethylene (All Grade/ All Type) 1780 MT<br>Note:<br>1. The words “Coating thickness (i) Adhesive 280 Micron (ii) Polyethylene 2760 Micron &<br>coating area 419674.766 Sq. mtr” may be added in the description of export item.<br>2. Description & quantity of import item at Sl. No. 1 may be allowed as per Sl. No. 1 of SION<br>C-593.<br>3. Description of import item at Sl. No. 2 may be amended as “Welding wire”.<br>4. Grade & thickness of steel to match in import & export items.<br>5. Coating thickness should be as per test report.<br>6. The applicant should import relevant adhesive only.<br>RA concerned may take suitable consequential action accordingly.<br>----- End of picture text -----<br>

Case No.:21/5/81-ALC2/2019 Party Name: LM WIND Meet No/Date:4/81- Status:
85 POWER BLADES INDIA<br>PVT. LTD. ALC2/2020<br>17.06.2020 Rejected
HQFile RLA File Lic.No/Date:3410045142

28 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

:01/81/050/00070/AM20/ :34/24/040/00046/AM20/ 15.05.2019

Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 03.08.2019 followed by reminders on 20.09.2019, 17.12.2019 & 07.06.2020. However, no reply has been received yet. Hence, the Committee decided to reject the case under intimation to RA Vadodara.

Case No.:22/5/81-ALC2/2019 Party Name: LM WIND Meet No/Date:4/81- Status:
POWER BLADES INDIA ALC2/2020 Rejected
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3410045143
:01/81/050/00071/AM20/ :34/24/040/00045/AM20/ 15.05.2019

86 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-1) was sent to the applicant on 03.08.2019 followed by reminders on 20.09.2019, 17.12.2019 & 07.06.2020. However, no reply has been received yet. Hence, the Committee decided to reject the case under intimation to RA Vadodara.

Case No.:26/5/81- Party Name: VOESTALPINE Meet No/Date:4/81- Status:
ALC2/2019 VAE VKN INDIA PRIVATE ALC2/2020 Approved
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0510410637
:01/81/050/00075/AM20/ :05/24/040/00101/AM20/ 20.05.2019

Decision: The Committee considered the case as per the agenda and noted the comments dated 7.7.2020 given by Consultant (SKB). After deliberating, the Committee decided to fix the ad-hoc norms on repeat of AA No. 0510409887 dated 08.03.2019 decided in Meeting No. 3/81-ALC2/2020 dated 27.05.2020 as under:

Export Items: Export Items:
Sl. No. ITCHS Code Export Item Quantity
1 73029090 50992429-Turnout 1 In9-190-54E1 27.000 Sets
2 73029090 50992430-Turnout 1 In 12-413-54E1 20.000 Sets
Import Items: Import Items: Import Items:
Sl.<br>No. ITCHS<br>Code Import Item Recommended<br>Quantity
1 73029090 DoubleSpringWasher Fe-6-25X 10X6 Net to net basis
2 73021010 Guard Rail 33c1 R260 According To En13674-3:<br>2010,Length 4100mm 1.02 Kgs/kg content in<br>the exportproduct
3 73021010 Guard Rail 33c1 R260 According To En13674-3:<br>2010,Length5800mm 1.02 Kgs/kg content in<br>the exportproduct
4 73021010 Guard Rail 33c1 R260 According To En13674-3:<br>2010,Length5900mm 1.02 Kgs/kg content in<br>the exportproduct
5 73021010 Guard Rail 33c1 R260 According To En13674-3:<br>2010,Length 7100mm 1.02 Kgs/kg content in<br>the exportproduct
6 73029090 Laminated I-Fast Net to net basis

29 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

7 73021010 Rail Flat Bottom 54e1- R 260 According To 13674-<br>1:2017,Length 12650mm 1.02 Kgs/kg content in<br>the exportproduct
8 73021010 Rail Flat Bottom 54e1- R 260 According To 13674-<br>1:2017,Length 13000mm 1.02 Kgs/kg content in<br>the exportproduct
9 73023000 Switchblade Blank Lh 54e1-11250-Forged, Switch<br>Blade Profile 54e1a1 Net to net basis
10 73023000 Switchblade Blank Lh 54e1-13580-Forged, Switch<br>Blade Profile 54e1a1 Net to net basis
11 73023000 Switchblade Blank Rh 54e1-11250-Forged, Switch<br>Blade Profile 54e1a1 Net to net basis
12 73023000 Switchblade Blank Rh 54e1-13580-Forged, Switch<br>Blade Profile 54e1a1 Net to net basis
13 73029090 TensionClamp Skl-12,Ktl 15 Um Net to net basis
**Note: 2%**wastage allowed on total weight of Rails of relevant grades in the export of 47 sets of<br>turnouts.<br>RA concerned maytake suitable consequential action accordingly.

Note: 2% wastage allowed on total weight of Rails of relevant grades in the export of 47 sets of turnouts.

Case No.:33/5/81-ALC2/2019 Party Name: BLUEBIRD Meet No/Date:4/81- Status:
SOLAR PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510410642 Action by :
:01/81/050/00082/AM20/ :05/23/040/00078/AM20/ 21.05.2019 TEC-3

Decision: The Committee considered the case as per the agenda and Consultant (TEC-3) informed that the applicant‟s reply dated 10.01.2020 is deficient. Therefore, the Committee decided to seek 88 again from the applicant to furnish the following information as per advice of Consultant (TEC-3):

  1. Why it is proposed to use cut cells for export product at Sl. No. 8 when full cell can be used to cover the range of module.

  2. Whether it is possible to use smaller cells in place of cutting large cells? If not, reasons for the same.

8<br>9 Case No.:34/5/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00083/AM20/ Case No.:34/5/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00083/AM20/ Case No.:34/5/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00083/AM20/ Party Name: JINDAL SAW<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Approved
RLA File<br>:05/23/040/00079/AM20/ Lic.No/Date:0510410679<br>23.05.2019
**Decision:**The Committee considered the case as per the agenda and decided to fix the ad-hoc norms,<br>on the basis of study group report/proposal recommended, as per written comments given by<br>Consultant (TEC-3) as under:<br>Export Items:
Sl.<br>No. ITCHS<br>Code Export Item Quantity

30 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

1. 73051129 73051129 Carbon<br>XTHK<br>22101.<br>Coated Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Steel LSAW 3LPE Coated Pipe30 “<br>15.94MM to26.35MM, API 5L Grad<br>000MTR,Wt. 11353.952 MT Carbon<br>Pie 30”OD to 40” X THK1594 M Odto40”<br>eX52 PSL2,<br>Steel LSAW 3LPE<br>M to 2635 MM API 5L Odto40”<br>eX52 PSL2,<br>Steel LSAW 3LPE<br>M to 2635 MM API 5L Odto40”<br>eX52 PSL2,<br>Steel LSAW 3LPE<br>M to 2635 MM API 5L Odto40”<br>eX52 PSL2,<br>Steel LSAW 3LPE<br>M to 2635 MM API 5L Odto40”<br>eX52 PSL2,<br>Steel LSAW 3LPE<br>M to 2635 MM API 5L 22101
<br>Grade<br>Coatin p .<br>X52 PSL2, 22101.000 MTR, Bare Pi<br>g thickness (i) Adhesive 200 Micro . ,<br>pes Wt. 11353.952 MT<br>n (ii) Polyethylene 3100 Meter
<br>**Micron & coating area 67913.963 Sq. mt ** <br>r
2. 73051129 Carbon Steel LSAW Bare Pipe 30”to40”OD X THK15.94MM<br>to30.18MM,API 5L GradeX52 PSL2, 2286.000MTR Wt. 1251.016<br>MT Carbon Steel LSAW Bare Pipe 30”to40”OD X THK15.94MM<br>to 30.18 MM, API 5L GradeX52 PSL2, 2286.000 MTR Wt.<br> 2286<br>Meter
1251.016MT
Import Items:
Sl.<br>No. ITCHS<br>Code Import Ite m Recommende d Quantity
1 72000000 Non-Alloy HR Coils/Plates 1.05 MT/MT<br>the exportpro content in<br>duct
2 72299021 Welding Wire 4 Kg/MT of export item at<br>Sl. No. 1
3 38109 090 WeldingFlux(Misc.Item) AllGrades As applied (Value upto
4 72299 021 CO2 Wire (Misc. Item)/Wi<br>AllSize/Grades re Electrod e/ Mig Wire 1% of FoB value)
5 72051 000 SteelShots/ Grits(Misc.It em) (AllG rade)
6 39011 000 Adhesive (All Grade/All T<br>Adhesive(LDPE/LLDPE) ype)<br> (AllGrade /All Type) 15.50 MT
7 39012 000 Polyethylene 254.10 MT
8 72000 000 Non-Alloy HR Coils/Plates 1.05 MT/ MT content in
the export product
9 72299021 Welding Wire 4 Kg/MT<br>Sl. No. 2 of export item at
10 38109090 WeldingFlux(Misc.Items)AllGrade As applied (Value upto<br>2% f FB l
CO2 Wi Mi I/Wi Eld/ Mi Wi
11 72299021 re (<br>AllSize/Gra sc. tem)re ectroe<br>des g re o o va e)
Note:<br>1. The words “Coating thickness (i) Adhesive 200 Micron (ii) Polyethylene 3100 Micron &<br>coating area 67913.963 Sq. mtr” may be added in the description of export item at Sl. No.<br>1.<br>2. Description & quantity of import items at Sl. No. 1 & 8 may be allowed as per Sl. No. 1 of<br>SION C-593.<br>3. Description of import items at Sl. No. 2 & 9 may be amended as “Welding wire”.<br>4. The applicant should import relevant adhesive only.<br>5. Grade & thickness of steel to match in import & export items.<br>6Ci hik hl ckness (i) Adhesive 200 Micr on (ii) Polyethylene 3100<br>description of export ite Micron &
<br>q. mtr” may be added in the <br>m at Sl. No.
. oatng tcness soud be as per test report.<br>RA concerned maytake suitable consequential action accordingly.

Case No.:39/5/81- Party Name: SHIVALIK Meet No/Date:4/81- Status: 90 ALC2/2019 BIMETAL CONTROLS LTD. ALC2/2020 Deferred 17.06.2020

31 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

HQ File RLA File Lic.No/Date:0510410693 Action by : :01/81/050/00088/AM20/ :05/24/040/00096/AM20/ 24.05.2019 Applicant

Decision: The Committee considered the case as per agenda and Consultant (TEC-3) informed vide email dated 14.06.2020 that the applicant‟s reply dated 01.06.2020 is deficient. Therefore, the Committee decided to seek again from the applicant to furnish the following information as per written comments of Consultant (TEC-3):

  1. Justification for wastage of 31.3% on input for slitting supported by evidence.

  2. Price of disposal of scrap in last 3 years with supporting documents.

  3. Documents for CIF price of inputs.

Case No.:40/5/81- Party Name: SHIVALIK Meet No/Date:4/81- Status:
ALC2/2019 BIMETAL CONTROLS ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0510410694 Action by :
:01/81/050/00089/AM20/ :05/24/040/00095/AM20/ 24.05.2019 Applicant

Decision: The Committee considered the case as per agenda and noted the written comments given by 91 Consultant (TEC-3). The Committee also noted the comments of DPIIT as given in other similar cases. Hence, the Committee decided to refer back the matter again to Consultant (TEC-3) for reexamination. The Committee also noted that the applicant has demanded significantly higher wastage than that recommended by Consultant (TEC-3). It was also decided to ask the applicant to justify wastages as demanded.

Case No.:41/5/81- Party Name: SHIVALIK Meet No/Date:4/81- Status:
ALC2/2019 BIMETAL CONTROLS ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0510410695 Action by :
:01/81/050/00090/AM20/ :05/24/040/00094/AM20/ 24.05.2019 Applicant

Decision: The Committee considered the case as per agenda and noted the written comments given by 92 Consultant (TEC-3). The Committee also noted the comments of DPIIT as given in other similar cases. Hence, the Committee decided to refer back the matter again to Consultant (TEC-3) for reexamination. The Committee also noted that the applicant has demanded significantly higher wastage than that recommended by Consultant (TEC-3). It was also decided to ask the applicant to justify wastages as demanded.

93 Case No.:1/16/81-<br>ALC2/2019 Party Name: KANADE<br>ANAND UDYOG PVT.<br>LTD. Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Approved
<br>HQ File<br>:01/81/050/00286/AM20/ RLA File<br>:03/94/040/00569/AM20/ Lic.No/Date:0310832294<br>17.10.2019
**Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written commentsgiven byDPIIT vide U. O. No.: P-47011/41/2020-TSW dated 21.02.2020,

32 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

taking cue from SIONs C-371 & C-375, as under: taking cue from SIONs C-371 & C-375, as under: taking cue from SIONs C-371 & C-375, as under:
ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
73089090 Galvanised Cable Tray<br>(Exempt Material -<br>Zinc Ingots 75.00M.T.) 600.000<br>MT 79011100 Zinc Ingots<br>(Purity<br>99.95%) 24 MT i.e. 4%<br>of net weight of<br>export item
RA concerned maytake suitable consequential action accordingly.
Case No.:2/16/81- Party Name: KANADE Meet No/Date:4/81- Status:
ALC2/2019 ANAND UDYOG PVT. ALC2/2020 Approved
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0310832295
:01/81/050/00287/AM20/ :03/94/040/00570/AM20/ 17.10.2019

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by DPIIT vide U. O. No.: P-47011/41/2020-TSW dated 21.02.2020, 94 taking cue from SIONs C-371 & C-375, as under:

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
73089090 Galvanised Cable Tray<br>(Exempt Material – Zinc<br>Ingots 75.00 M.T) 600.000<br>MT 79011100 Zinc Ingots<br>(Purity<br>99.95%) 24 MT i.e. 4%<br>of net weight of<br>export item
Case No.:6/16/81-ALC2/2019 Party Name: TOSHIBA Meet No/Date:4/81- Status:
TRANSMISSION & ALC2/2020 Deferred
DISTRIBUTION SYSTEMS 17.06.2020
HQ File RLA File Lic.No/Date:0910068126 Action by :
:01/81/050/00291/AM20/ :09/24/040/00368/AM20/ 22.10.2019 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to 95 furnish following information as per written comments of DHI:

  1. Specific use of Aluminum sheets (Item No. 3) in export product with justification of quantity of import & wastage.

  2. Calculation of painting material and import items at Sl. No. 6 & 7.

96 Case No.:7/16/81-ALC2/2019 Party Name: SHIVALIK<br>BIMETAL CONTROLS<br>LTD. Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00292/AM20/ RLA File<br>:05/24/040/00425/AM20/ Lic.No/Date:0510412272<br>25.10.2019 <br>Action by :<br>Applicant
**Decision:**The Committee considered the case as per agenda and noted that a deficiency letter seeking<br>certain information as raised byConsultant(TEC-3)was sent to the applicant on 07.06.2020.

33 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information. The case stands deferred.

Case No.: Party Name: AXORA Meet No/Date:4/81- Status:
9/16/81-ALC2/2019 RESOURCES LIMITED ALC2/2020 Rejected
17.06.2020
HQ File RLA File Lic.No/Date:0210209513
:01/81/050/00294/AM20/ :02/24/040/00109/AM20/ 28.10.2019

Decision: The Committee considered the case as per the agenda and noted that the applicant in its 97 letter dated 13[th] May, 2020 stated that the percentage of Lead in imported product is 98%. However, as per certificate of analysis of inputs submitted the applicant, the Lead percent in the imported product has purity greater than 99%. The Committee opined that there is no manufacturing process involved as the presence of Lead in import and export is greater than 99%. Therefore, the Committee decided to reject the case as per written comments given by MSME via email dated 08.07.2020 under intimation to RA Kolkata.

Case No.:44/18/81- Party Name: APAR Meet No/Date:4/81- Status:
ALC2/2019 INDUSTRIES LIMITED ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:3410045678
:01/81/050/00338/AM20/ :34/24/040/00268/AM20/ 03.12.2019
Case No.:44/18/81-<br>ALC2/2019 Case No.:44/18/81-<br>ALC2/2019 Party Name: APAR<br>INDUSTRIES LIMITED Party Name: APAR<br>INDUSTRIES LIMITED Party Name: APAR<br>INDUSTRIES LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Approved
HQ File<br>:01/81/050/00338/AM20/ RLA File<br>:34/24/040/00268/AM20/ Lic.No/Date:3410045678<br>03.12.2019
98 **Decision:**The Committee considered the case as per agenda and noted the comments given by DPIIT<br>vide U. O. No.: P-47011/107/2019-TSW dated 21.02.2020. The Committee deliberated the matter in<br>the Meeting and noted that similar norms for AA No. 3410043984 dated 21.03.2018 of the same<br>applicant have already been decided in Meeting No. 7/81 dated 10.07.2019. Hence, the Committee<br>decided to fix the ad-hoc norms as under:
ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
<br>76149000 Aluminium Conductor<br>Composite Core<br>(ACCC) Net Content :<br>(1) Aluminium Ingots:<br>1949.900 MT (2)<br>ARTICLES OF<br>GRAPHITE<br>(CARBON FIBER<br>COMPOSITE CORE<br>IN VARIOUS<br>SIZES): 1700 KMS<br>(166.600MT)<br>(Total Weight =<br>2116.500MT) 1700<br>Kilometer 76011010 Aluminium<br>Ingots Allowed upto<br>1% wastage<br>with<br>accountability<br>clause
85459090 ARTICLES OF<br>GRAPHITE (<br>CARBON FIBER<br>COMPOSITE<br>CORE IN<br>VARIOUS<br>SIZES) 1717 KMS<br>(168.27 MT)<br>inclusive of 1%<br>wastage
Note:<br>1. For import item at Sl. No. 2, the type & specification should match<br>the export product.<br>RA concerned maytake suitable consequential action accordingly. with item used in

34 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:3/19/81-ALC2/2019 Party Name: DIAMOND Meet No/Date:4/81- Status:
ENGINEERING (CHENNAI) ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0410166336 Action by :
:01/81/050/00342/AM20/ :04/24/040/00135/AM20/ 06.12.2019 Applicant

99 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per written comments given by DPIIT vide U. O. No.: P-47011/119/2019-TSW dated 11.05.2020:

  1. Sl. No. 1, 3, 4, 5 & 11 of the Standard Deficiency Format.
Case No.:4/19/81- Party Name: PEARL Meet No/Date:4/81- Status:
ALC2/2019 INSULATIONS PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710115821 Action by :
:01/81/050/00343/AM20/ :07/24/040/00202/AM20/ 06.12.2019 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of 100 application has not yet been received from the applicant and in this regard, an email was sent on 20.12.2019 followed by a reminder on 31.03.2020. The applicant via email dated 02.04.2020 requested more time to submit the documents. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:6/19/81- Party Name: ALUFOIL Meet No/Date:4/81- Status:
ALC2/2019 PRODUCTS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0210209602 Action by :
:01/81/050/00345/AM20/ :02/24/040/00131/AM20/ 09.12.2019 Applicant

101 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by a reminder on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

102 <br>Case No.:5/19/81-<br>ALC2/2019<br>Party Name: RAJPUTANA<br>INDUSTRIES PVT. LTD.<br>Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020<br>Status:<br>Deferred<br>HQ File<br>:01/81/050/00344/AM20/<br>RLA File<br>:13/24/040/00177/AM20/<br>Lic.No/Date:1310049465<br>09.12.2019<br>Action by :<br>Applicant<br>**Decision:**The Committee considered the case asper agenda and noted that a deficiencyletter Party Name: RAJPUTANA<br>INDUSTRIES PVT. LTD.<br>RLA File<br>:13/24/040/00177/AM20/ <br>Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020<br>Lic.No/Date:1310049465<br>09.12.2019 Status:<br>Deferred
Action by :<br>Applicant

Decision: The Committee considered the case as per agenda and noted that a deficiency letter

35 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

seeking certain information as raised by MSME was sent to the applicant on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:7/19/81- Party Name: EFD Meet No/Date:4/81- Status:
ALC2/2019 INDUCTION PRIVATE ALC2/2020 Approved
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710115833
:01/81/050/00346/AM20/ :07/24/040/00213/AM20/ 10.12.2019

Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as 103 per written comments given by MeitY vide F. No. W-21/21/2020-IPHW-MeitY dated 08.05.2020 as under:

  1. Quantity of import items at Sl. No. 1 to 9 may be allowed on net to net basis with nil wastage.

  2. Quantity of import items at Sl. No. 10 to 19 may be allowed on net to net basis with accountability clause on nil wastage .

Case No.:10/19/81- Party Name: NAMO Meet No/Date:4/81- Status:
ALC2/2019 ALLOYS PVT. LTD. ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0510412859
:01/81/050/00349/AM20/ :05/24/040/00544/AM20/ 11.12.2019
**Decision:**The Committee considered the case **Decision:**The Committee considered the case **Decision:**The Committee considered the case **Decision:**The Committee considered the case **Decision:**The Committee considered the case as per agenda. The matter was as per agenda. The matter was deliberated in the deliberated in the
meeting and the Committee decided to fix the ad-hoc norms on the recommendation of Consultant
(TEC-3) as under:
ITCHS<br>Code Export Item Quantity Sl.<br>No. ITCHS<br>Code Import Item Recommended<br>Quantity
104 Aluminium<br>Alloy Ingots 1 76020010 Aluminium Scrap As per SION<br>C-3
Containing Net 2 28046900 Silicon
Aluminium –
445350 KG,
76012010 Silicon – 47100<br>KG , Copper –<br>7550 KG 500000<br>Kgs 3 74040012 Copper Scrap
(Aluminium-
89.07%,
Silicon- 9.42%,
Copper- 1.51%)
Note : Description of import items should be as per SION C-3.
RA concerned maytake suitable consequential action accordingly.

36 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:9/19/81- Party Name: NEO POWER Meet No/Date:4/81- Status:
ALC2/2019 ELECTRONICS & ALC2/2020 Deferred
PROJECTS PVT.LTD 17.06.2020
HQ File RLA File Lic.No/Date:0310833357 Action by :
:01/81/050/00348/AM20/ :03/95/040/00888/AM20/ 11.12.2019 Applicant

105 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per advice of Consultant (TEC-3):

  1. Weight of batteries.

  2. Sl. No. 5 & 11 of the Standard Deficiency Format.

Case No.:11/19/81- Party Name: SHERA Meet No/Date:4/81- Status:
ALC2/2019 ENERGY PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:1310049469 Action by :
:01/81/050/00350/AM20/ :13/24/040/00184/AM20/ 11.12.2019 Applicant

106 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per written comments given by DPIIT vide U. O. No.: P-47011/20/2020-TSW dated 18.03.2020:

  1. Sl. No. 1, 2, 3, 5 & 11 of the Standard Deficiency Format.
Case No.:12/19/81- Party Name: TOSHIBA Meet No/Date:4/81- Status:
ALC2/2019 TRANSMISSION & ALC2/2020 Deferred
DISTRIBUTION SYSTEMS 17.06.2020
HQ File RLA File Lic.No/Date:0910068279 Action by :
:01/81/050/00351/AM20/ :09/24/040/00134/AM20/ 12.12.2019 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 107 to furnish following information as per written comments of DHI:

  1. Specific use of Aluminum sheets (Item No. 3) in export product with justification of quantity of import & wastage.

  2. Calculation of painting material and import items at Sl. No. 7 & 8.

108 <br>Case No.:13/19/81-<br>ALC2/2019 Party Name: SUBHAM<br>ENGINEERING WORKS Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00352/AM20/ RLA File<br>:03/95/040/00843/AM20/ Lic.No/Date:0310833407<br>13.12.2019 Action by :<br>Applicant
**Decision:**The Committee considered the case asper the agenda and noted that the copyof

37 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

application has not yet been received from the applicant and in this regard, an email was sent on 23.12.2019 followed by a reminder on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:2/22/81- Party Name: ASTA INDIA Meet No/Date:4/81- Status:
ALC2/2019 PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3410045771 Action by :
:01/81/050/00392/AM20/ :34/24/040/00262/AM20/ 08.01.2020 Applicant

109 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 17.02.2020 followed by a reminder on 13.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:1/22/81- Party Name: RAJHANS Meet No/Date:4/81- Status:
ALC2/2019 METALS PVT. LIMITED ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:2410042968
:01/81/050/00391/AM20/ :24/24/040/00044/AM20/ 08.01.2020
Case No.:1/22/81-<br>ALC2/2019<br>HQ File<br>:01/81/050/00391/AM20/ Party Name: RAJHANS<br>METALS PVT. LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Approved
RLA File<br>:24/24/040/00044/AM20/ Lic.No/Date:2410042968<br>08.01.2020
110 <br>Decision:The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by Consultant (SKB) as under:<br>ITCHS<br>Code<br>Export Item<br>Quantity<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>74032100<br>Brass Billets<br>(Copper: 51-61<br>%,<br>Lead: 2-<br>3.5%, Zinc: 33-<br>35.5%)<br>200000.000<br>Kgs<br>74040022<br>Brass Scrap (Honey<br>Grade As Per ISRI)<br>(Copper: 51-61%,<br>Lead: 2-3.5%, Zinc:<br>33-35.5 %)<br>1.06Kgs/Kg on<br>net content of<br>brass in the<br>export product<br>Note:<br>1. Export item (Brass Billets) should contain- Copper: 51-61 %, Lead: 2-3.5% & Zinc: 33-<br>35.5%).<br>2. Import item (Brass Scrap –Honey Grade as Per ISRI) should contain-Copper: 51-61%,<br>Lead: 2-3.5% & Zinc: 33-35.5 %.<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.

38 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:3/22/81- Party Name: JAIN FGL Meet No/Date:4/81- Status:
ALC2/2019 METAL INDUSTRIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0410166419 Action by :
:01/81/050/00393/AM20/ :04/24/040/00151/AM20/ 09.01.2020 Applicant

111 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

Case No.:4/22/81- Party Name: SAPA Meet No/Date:4/81- Status:
ALC2/2019 EXTRUSION INDIA ALC2/2020 Approved
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710116012
:01/81/050/00394/AM20/ :07/24/040/00240/AM20/ 09.01.2020
Case No.:4/22/81-<br>ALC2/2019 Party Name: SAPA<br>EXTRUSION INDIA<br>PRIVATE LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Approved
HQ File<br>:01/81/050/00394/AM20/ RLA File<br>:07/24/040/00240/AM20/ Lic.No/Date:0710116012<br>09.01.2020
112 <br>**Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by DPIIT vide U. O. No.: P-47011/297/2019-TSW dated 30.06.2020 as<br>under:<br>ITCHS<br>Code<br>Export Item<br>Quantity<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>76169990<br>Other Articles<br>of Aluminum (<br>Aluminum<br>rails )<br>980392.160<br>Kgs<br>76012020<br>Unwrought<br>Aluminium Billets<br>Alloy 600516 x<br>Diameter 203mm x<br>Length5800mm<br>As applied for<br>i.e. 1000 MT<br>inclusive of 2%<br>wastage<br>Note: Import item shall be of relevant grade and composition as contained/utilized in the<br>export item.<br>RA concerned maytake suitable consequential action accordingly.
Case No.:7/22/81- Party Name: GALA Meet No/Date:4/81- Status:
ALC2/2019 PRECISION ENGINEERING ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0310834081 Action by :
:01/81/050/00397/AM20/ :03/94/040/00847/AM20/ 10.01.2020 Applicant

113 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 18.02.2020 followed by a reminder on 16.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

39 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:6/22/81- Party Name: RAJHANS Meet No/Date:4/81- Status:
ALC2/2019 IMPEX PRIVATE ALC2/2020 Approved
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:2410042974
:01/81/050/00396/AM20/ :24/24/040/00047/AM20/ 10.01.2020
Case No.:6/22/81-<br>ALC2/2019 Case No.:6/22/81-<br>ALC2/2019 Party Name: RAJHANS<br>IMPEX PRIVATE<br>LIMITED Party Name: RAJHANS<br>IMPEX PRIVATE<br>LIMITED Party Name: RAJHANS<br>IMPEX PRIVATE<br>LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020<br>Lic.No/Date:2410042974<br>10.01.2020 Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020<br>Lic.No/Date:2410042974<br>10.01.2020 Status:<br>Approved
HQ File<br>:01/81/050/00396/AM20/ RLA File<br>:24/24/040/00047/AM20/
11<br>4 **Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by Consultant (SKB) as under:
ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
74032100 Brass Billets<br>(Copper: 56-58<br>%, Lead: 3%,<br>Zinc: 37%, Other<br>impurities: 2 %) 75.000<br>MT 74040022 Brass Scrap- Honey<br>Grade<br>(Copper: 56-58 %,<br>Lead: 3%, Zinc:<br>37%, Other<br>impurities: 2%) 1.06Kgs/Kg on<br>net content of<br>brass in the<br>export product
Note:<br>1. Export item (Brass Billets) should contain- Copper: 56-58 %, Lead: 3%, Zinc: 37%) &<br>other impurities: 2 %.<br>2. Import item (Brass Scrap- Honey Grade) should contain-Copper: 56-58 %, Lead: 3%,<br>Zinc: 37% & other impurities: 2%).<br>3. Composition of brass to match both for imports and exports.<br>RA concerned maytake suitable consequential action accordingly.
Case No.:8/22/81- Party Name: H. H. METALS Meet No/Date:4/81- Status:
ALC2/2019 ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413314 Action by :
:01/81/050/00398/AM20/ :05/23/040/00377/AM20/ 13.01.2020 Applicant

115 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 18.02.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:10/22/81- Party Name: RATNAMANI Meet No/Date:4/81- Status:
ALC2/2019 METALS AND TUBES LTD ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0810146986 Action by :
:01/81/050/00400/AM20/ :08/24/040/00335/AM20/ 13.01.2020 TEC-3

116 Decision: The Committee considered the case as per the agenda and noted that the applicant‟s reply was sent to Consultant (TEC-3) on 17.06.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the comments.

40 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:11/22/81- Party Name: ALUTOP Meet No/Date:4/81- Status:
ALC2/2019 ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710116026 Action by :
:01/81/050/00401/AM20/ :07/24/040/00239/AM20/ 14.01.2020 Applicant

117 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 18.02.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:14/22/81- Party Name: DISHA AUTO Meet No/Date:4/81- Status:
ALC2/2019 COMPONENTS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310834191 Action by :
:01/81/050/00404/AM20/ :03/94/040/00823/AM20/ 15.01.2020 Applicant

118 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 17.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application.

Case No.:12/22/81- Party Name: SELP INDIA Meet No/Date:4/81- Status:
ALC2/2019 PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310834156 Action by :
:01/81/050/00402/AM20/ :03/95/040/00997/AM20/ 15.01.2020 MeitY

119 Decision: The Committee considered the case as per agenda and noted that the applicant directly sent reply of deficiency letter to MeitY on 08.07.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:17/22/81- Party Name: K G Meet No/Date:4/81- Status:
ALC2/2019 METALLOYS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:1310049503 Action by :
:01/81/050/00407/AM20/ :13/24/040/00191/AM20/ 17.01.2020 Applicant

120 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the applicant on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

41 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:16/22/81- Party Name: METALIC Meet No/Date:4/81- Status:
ALC2/2019 IMPRESSIONS (INDIA) PVT. ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0510413371 Action by :
:01/81/050/00406/AM20/ :05/24/040/00672/AM20/ 17.01.2020 Applicant

121 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of Consultant (TEC-1):

  1. Exact size of import item & export item.

  2. Layout sheet of manufacturing process.

  3. Justification for 15% wastage claimed. The case stands deferred.

Case No.:15/22/81- Party Name: P. K. STEEL Meet No/Date:4/81- Status: ALC2/2019 AND METAL WORKS ALC2/2020 Approved 17.06.2020 HQ File RLA File Lic.No/Date:0510413370 :01/81/050/00405/AM20/ :05/24/040/00668/AM20/ 17.01.2020

Case No.:15/22/81-<br>ALC2/2019 Case No.:15/22/81-<br>ALC2/2019 Case No.:15/22/81-<br>ALC2/2019 Case No.:15/22/81-<br>ALC2/2019 Case No.:15/22/81-<br>ALC2/2019 Case No.:15/22/81-<br>ALC2/2019 Status:<br>Approved
HQ File<br>:01/81/050/00405/AM20/
122 **Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms on<br>the basis of study group report dated 21.02.2020, as adopted by the Committee in the Meeting No.<br>24/81 dated 18.03.2020, as under:
<br>ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import Item Recommended<br>Quantity
73239390 Table, Kitchen & other<br>household articles made<br>from Magnetic Stainless<br>Steel Circles of Grade 410<br>(Stainless Steel Content:<br>127272.73 Kgs) 127272.730<br>Kgs 72193590 Magnetic<br>Stainless<br>Steel Circles<br>of Grade<br>410 1.10 Kgs/Kg<br>content in the<br>export product
Note:<br>1. Grade of steel to match in import & export.<br>2. Thickness of sheet/circle should be between 0.1 mm to 1 mm.<br>3. Export product should be of circular/oval shape only.<br>RA concerned maytake suitable consequential action accordingly.
Case No.:18/22/81- Party Name: POLYCAB Meet No/Date:4/81- Status:
ALC2/2019 INDIA LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310834331 Action by :
:01/81/050/00408/AM20/ :03/95/040/01018/AM20/ 20.01.2020 Applicant

123 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 18.02.2020 followed by a reminder on 12.06.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the applicant for submitting the complete set of application. The case stands deferred.

42 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:21/22/81- Party Name: GAVIRANGA Meet No/Date:4/81- Status:
ALC2/2019 ENTERPRISES ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0710116046
:01/81/050/00411/AM20/ :07/24/040/00255/AM20/ 21.01.2020

124 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by MeitY vide F. No. W-21/23/2020-IPHW-MeitY dated 08.05.2020. (Copy enclosed)

Case No.:22/22/81- Party Name: GAVIRANGA Meet No/Date:4/81- Status:
ALC2/2019 ENTERPRISES ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0710116047
:01/81/050/00412/AM20/ :07/24/040/00256/AM20/ 21.01.2020

125 Decision: The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per written comments given by MeitY vide F. No. W-21/24/2020-IPHW-MeitY dated 08.05.2020. (Copy enclosed)

Case No.:20/22/81- Party Name: USHA Meet No/Date:4/81- Status:
ALC2/2019 INDUSTRIAL ALC2/2020 Deferred
CORPORATION 17.06.2020
HQ File RLA File Lic.No/Date:0810147053 Action by :
:01/81/050/00410/AM20/ :08/24/040/00333/AM20/ 21.01.2020 Applicant

126 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 18.02.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.: Party Name: GURUSHREE Meet No/Date:4/81- Status:
1/1/81-ALC2/2020 INDUSTRIES PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:6310001432 Action by :
:01/81/050/00459/AM20 :63/24/040/00001/AM20 18.02.2020 Applicant

127 Decision: The Committee considered the case as per agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the applicant on 07.06.2020. However, no reply has been received yet. Therefore, the Committee decided to remind the applicant for furnishing the requisite information.

43 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

128 Case No.:<br>2/1/81-ALC2/2020 Party Name: RATNAVEER<br>METALS LIMITED<br> <br>RLA File<br>:34/24/040/00378/AM20/ Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00460/AM20/ Lic.No/Date:3410045925<br>03.03.2020 Action by :<br>MSME
<br>**Decision:**The Committee considered the case as per agenda and noted that a copy of application was<br>sent to MSME on 01.07.2020 for examination of the case. However, no comments have been<br>received yet. Hence, the Committee decided to wait for the comments.<br>The case stands deferred.
Case No.:4/1/81- Party Name: GLITTER Meet No/Date: Status:
ALC2/2020 METALS PRIVATE 4/81-ALC2/2020 Approved
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310835199
:01/81/050/00462/AM20/ :03/94/040/01011/AM20/ 04.03.2020
Case No.:4/1/81-<br>ALC2/2020 Party Name: GLITTER<br>METALS PRIVATE<br>LIMITED Meet No/Date:<br>4/81-ALC2/2020<br>17.06.2020 Status:<br>Approved
HQ File<br>:01/81/050/00462/AM20/ RLA File<br>:03/94/040/01011/AM20/ Lic.No/Date:0310835199<br>04.03.2020
129 <br>**Decision:**The Committee considered the case as per agenda and decided to fix the ad-hoc norms as<br>per written comments given by DPIIT vide U. O. No.: P-47011/77/2020-TSW dated 28.04.2020 as<br>under:<br>ITCHS<br>Code<br>Export Item<br>Quantity<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Quantity<br>73121020<br>Alloy Steel<br>Wire Ropes<br>Galvanised<br>608.000<br>MT<br>72299090<br>Alloy Steel Coated/<br>Plated Wire – Wire of<br>SAE Grade<br>614.08 MT<br>@1.01 Kgs/Kg<br>content in the<br>exportproduct<br>Note:<br>1. The words “Alloy Steel” may be prefixed with the description of export item.<br>2. Import item shall be of relevant grade and diameter as contained in the export item.<br>RA concerned maytake suitable consequential action accordingly.
Case No.:3/1/81-ALC2/2020 Party Name: Meet No/Date:4/81- Status:
PARAMJYOTI MOVERS ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0610039446 Action by :
:01/81/050/00461/AM20/ :06/24/040/00091/AM20/ 04.03.2020 Applicant

130 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

44 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:7/1/81-ALC2/2020 Party Name: KEI Meet No/Date:4/81- Status:
INDUSTRIES LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413815 Action by :
:01/81/050/00465/AM20/ :05/23/040/00460/AM20/ 06.03.2020 Applicant

131 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:5/1/81-ALC2/2020 Party Name: MAK Meet No/Date:4/81- Status:
CONTROLS AND ALC2/2020 Deferred
SYSTEMS PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3210079446 Action by :
:01/81/050/00463/AM20/ :32/24/040/00136/AM20/ 06.03.2020 DHI

132 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DHI on 18.06.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case No.:10/1/81- Party Name: LOTUS Meet No/Date:4/81- Status:
ALC2/2020 AVIATION TECHNOLOGY ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0510413864 Action by :
:01/81/050/00468/AM20/ :05/23/040/00475/AM20/ 12.03.2020 Applicant

133 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 31.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:8/1/81- Party Name: NAMO Meet No/Date:4/81- Status:
ALC2/2020 ALLOYS PVT. LTD. ALC2/2020 Approved
17.06.2020
HQ File RLA File Lic.No/Date:0510413836
:01/81/050/00466/AM20/ :05/24/040/00751/AM20/ 12.03.2020

134 Decision: The Committee considered the case as per agenda. The matter was deliberated in the meeting and the Committee decided to fix the ad-hoc norms on the recommendation of Consultant (TEC-3) as under:

ITCHS<br>Code Export Item Quantity Sl.<br>No. ITCHS<br>Code Import Item Recommended<br>Quantity
76012010 Aluminium 500000 1 76020010 AluminiumScrap AsperSION

45 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Alloys Ingots Kgs 2 28046900 Silicon C-3
Containing Net
Aluminium-
445350.00 Kg,
Silicon-
47100.00 Kg,
Copper-7550.00 3 74040012 Copper Scrap
Kg
(Aluminium-
89.07%,
Silicon-9.42%,
Copper-1.51%)

Note : Description of import items should be as per SION C-3.

Case No.:11/1/81- Party Name: PARAM Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310835385 Action by :
:01/81/050/00469/AM20/ :03/95/040/01157/AM20/ 12.03.2020 Applicant

135 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:13/1/81- Party Name: AUSA MEDICAL Meet No/Date:4/81- Status:
ALC2/2020 DEVICES PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0710116253 Action by :
:01/81/050/00471/AM20/ :07/24/040/00304/AM20/ 13.03.2020 MSME

136 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MSME on 03.07.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

137 Case No.:17/1/81-<br>ALC2/2020 Party Name: DIACH<br>CHEMICALS & PIGMENTS<br>PRIVATE LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00475/AM20/ RLA File<br>:02/24/040/00202/AM20/ Lic.No/Date:0210209825<br>13.03.2020 <br>Action by :<br>Applicant
**Decision:**The Committee considered the case as per agenda and decided to seek from<br>to furnish following information as per written comments of MSME:<br>1. Net content of lead in export item. the applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

46 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

  1. Percent of lead in import and export item.

  2. Certificate of analysis of import item.

Case No.:12/1/81- Party Name: JINDAL SAW Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413872 Action by :
:01/81/050/00470/AM20/ :05/23/040/00461/AM20/ 13.03.2020 Applicant

138 Decision: The Committee considered the case as per the agenda and decided to seek from the applicant to furnish the following information as per advice of Consultant (TEC-3):

  1. Coating thickness of each layer as per purchase order.

  2. Surface area of pipes to be coated.

Case No.:14/1/81- Party Name: JINDAL SAW Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413873 Action by :
:01/81/050/00472/AM20/ :05/23/040/00457/AM20/ 13.03.2020 Applicant

Decision: The Committee considered the case as per the agenda and decided to seek from the 139 applicant to furnish the following information as per advice of Consultant (TEC-3):

  1. Coating thickness of each layer as per purchase order.

  2. Surface area of pipes to be coated.

  3. To provide clarification for why the import items at Sl. No. 2 & 3 are same.

Case No.:15/1/81- Party Name: SHIVALIK Meet No/Date:4/81- Status:
ALC2/2020 BIMETAL CONTROLS LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413875 Action by :
:01/81/050/00473/AM20/ :05/24/040/00759/AM20/ 13.03.2020 TEC-3

140 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 08.06.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the comments.

47 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:18/1/81- Party Name: KEI Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510413882 Action by :
:01/81/050/00476/AM20/ :05/23/040/00477/AM20/ 16.03.2020 TEC-3

141 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 08.06.2020 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind Consultant (TEC-3) for expediting the comments.

Case No.:20/1/81- Party Name: SIECHEM Meet No/Date:4/81- Status:
ALC2/2020 TECHNOLOGIES PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410166620 Action by :
:01/81/050/00478/AM20/ :04/24/040/00197/AM20/ 16.03.2020 Applicant

142 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:19/1/81- Party Name: TUBACEX Meet No/Date:4/81- Status:
ALC2/2020 PRAKASH INDIA PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310835401 Action by :
:01/81/050/00477/AM20/ :03/95/040/01068/AM20/ 16.03.2020 TEC-3

143 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to Consultant (TEC-3) on 29.06.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

144 Case No.:21/1/81-<br>ALC2/2020 Party Name: JANS COPPER<br>PVT. LTD. Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020<br>Lic.No/Date:0310835436<br>17.03.2020 Status:<br>Approved<br>
<br>HQ File<br>:01/81/050/00479/AM20/ RLA File<br>:03/94/040/01044/AM20/
<br>Decision:The Committee considered the case as per the agenda and decided to approve the case as<br>per written comments given byDPIITvide U. O. No.: P-47011/34/2020-TSW dated 06.05.2020<br>(copy enclosed).<br>RA concerned maytake suitable consequential action accordingly.

48 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:22/1/81- Party Name: UPR Meet No/Date:4/81- Status:
ALC2/2020 ENGINEERING PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310835465 Action by :
:01/81/050/00480/AM20/ :03/95/040/01185/AM20/ 17.03.2020 Applicant

145 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 30.03.2020. However, no information has been received yet. Therefore, the Committee decided to remind the applicant for submitting the complete set of application.

Case No.:2/4/81- Party Name: KRISTI Meet No/Date:4/81-ALC2/2020 Status:
ALC2/2020 OVERSEAS 17.06.2020 Deferred
HQ File RLA File Lic.No/Date:2410043096 Action by :
:01/81/050/00527/AM21/ :24/24/040/00007/AM21/ 11.05.2020 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 146 to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage.

Case No.:1/4/81- Party Name: N F METALS Meet No/Date:4/81- Status:
ALC2/2020 CORPN ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414148 Action by :
:01/81/050/00526/AM21/ :05/24/040/00038/AM21/ 11.05.2020 Applicant

147 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:3/4/81- Party Name: APAR Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836192 Action by :
:01/81/050/00528/AM21/ :03/94/040/00053/AM21/ 14.05.2020 Applicant

148 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

49 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

149

Case No.:7/4/81- Party Name: C L GUPTA Meet No/Date:4/81- Status:
ALC2/2020 EXPORTS LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414181 Action by :
:01/81/050/00532/AM21/ :05/23/040/00016/AM21/ 15.05.2020 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:8/4/81-<br>Party Name: C L GUPTA Meet No/Date:4/81- Status:
ALC2/2020<br>EXPORTS LIMITED ALC2/2020 Deferred
17.06.2020
HQ File<br>RLA File Lic.No/Date:0510414182 Action by :
150 :01/81/050/00533/AM21/<br>:05/23/040/00014/AM21/<br>**Decision:**The Committee considered the case as per the 15.05.2020<br>agenda and noted that Applicant<br>the copy of
application has not yet been received from the applicant and in this regard, an email was sent on
03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait
for the complete set of application.
The case stands deferred.
Case No.:13/4/81- Party Name: JAY METAL Meet No/Date:4/81- Status:
ALC2/2020 ALLOYS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043104 Action by :
:01/81/050/00538/AM21/ :24/24/040/00008/AM21/ 15.05.2020 Applicant

151 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage.

Case No.:6/4/81- Party Name: PARAS Meet No/Date:4/81- Status:
ALC2/2020 LAMINATES PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414178 Action by :
:01/81/050/00531/AM21/ :05/24/040/00047/AM21/ 15.05.2020 Applicant

152 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

50 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:10/4/81- Party Name: POWERCORE Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES INDIA PVT. ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0710116462 Action by :
:01/81/050/00535/AM21/ :07/24/040/00315/AM20/ 15.05.2020 Applicant

153 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, the applicant via email 09.07.2020 informed that they will send documents soon. Hence, the Committee decided to wait for the complete set of application.

Case No.:4/4/81- Party Name: R R KABEL Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836210 Action by :
:01/81/050/00529/AM21/ :03/95/040/00061/AM21/ 15.05.2020 Applicant

154 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:11/4/81- Party Name: R R KABEL Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836231 Action by :
:01/81/050/00536/AM21/ :03/95/040/00059/AM21/ 15.05.2020 Applicant

155 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:5/4/81-<br>Party Name: R. M. ALLOYS Meet No/Date:4/81- Status:
ALC2/2020<br>PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File<br>RLA File Lic.No/Date:0510414175 Action by :
156 :01/81/050/00530/AM21/<br>:05/24/040/00048/AM21/<br>**Decision:**The Committee considered the case as per the 15.05.2020<br>agenda and noted that Applicant<br>the copy of
application has not yet been received from the applicant and in this regard, an email was sent on
03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait
for the complete set of application.
The case stands deferred.

51 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:12/4/81- Party Name: R. R. KABEL Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836232 Action by :
:01/81/050/00537/AM21/ :03/95/040/00050/AM21/ 15.05.2020 Applicant

157 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:9/4/81- Party Name: VEDANTA Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414187 Action by :
:01/81/050/00534/AM21/ :05/24/040/00770/AM20/ 15.05.2020 Applicant

158 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:16/4/81- Party Name: MONTEX GLASS Meet No/Date:4/81- Status:
ALC2/2020 FIBRE IND PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836249 Action by :
:01/81/050/00541/AM21/ :03/95/040/00083/AM21/ 18.05.2020 Applicant

159 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

160 Case No.:14/4/81-<br>ALC2/2020 Party Name: VIRGO<br>LAMINATES LIMITED Meet No/Date:4/81-<br>ALC2/2020<br>17.06.2020 Status:<br>Deferred
<br>HQ File<br>:01/81/050/00539/AM21/ RLA File<br>:05/24/040/00050/AM21/ Lic.No/Date:0510414200<br>18.05.2020 <br>Action by :<br>Applicant
<br>**Decision:**The Committee considered the case as per the agenda and noted that the copy of<br>application has not yet been received from the applicant and in this regard, an email was sent on<br>03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait<br>for the complete set of application.<br>The case stands deferred.

52 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:17/4/81- Party Name: DESHMUKH Meet No/Date:4/81- Status:
ALC2/2020 LEAD PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836251 Action by :
:01/81/050/00542/AM21/ :03/94/040/00073/AM21/ 19.05.2020 Applicant

161 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:18/4/81- Party Name: RAJHANS Meet No/Date:4/81- Status:
ALC2/2020 IMPEX PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043111 Action by :
:01/81/050/00543/AM21/ :24/24/040/00010/AM21/ 19.05.2020 Applicant

162 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage.

Case No.:15/4/81- Party Name: RAJHANS Meet No/Date:4/81- Status:
ALC2/2020 METALS PVT. LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043110 Action by :
:01/81/050/00540/AM21/ :24/24/040/00006/AM21/ 19.05.2020 Applicant

163 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:21/4/81- Party Name: K G Meet No/Date:4/81- Status:
ALC2/2020 METALLOYS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414203 Action by :
:01/81/050/00546/AM21/ :05/23/040/00024/AM21/ 20.05.2020 Applicant

164 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

53 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:19/4/81- Party Name: NAMO ALLOYS Meet No/Date:4/81- Status:
ALC2/2020 PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414212 Action by :
:01/81/050/00544/AM21/ :05/24/040/00058/AM21/ 20.05.2020 Applicant

165 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:20/4/81- Party Name: MADHUBENI Meet No/Date:4/81- Status:
ALC2/2020 HOME APPLIANCES ALC2/2020 Deferred
PRIVATE LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0510414220 Action by :
:01/81/050/00545/AM21/ :05/24/040/00053/AM21/ 21.05.2020 Applicant

166 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:23/4/81- Party Name: EFD INDUCTION Meet No/Date:4/81- Status:
ALC2/2020 PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710116489 Action by :
:01/81/050/00548/AM21/ :07/24/040/00050/AM21/ 22.05.2020 MeitY

167 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MeitY on 08.07.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:22/4/81- Party Name: KEI INDUSTRIES Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414226 Action by :
:01/81/050/00547/AM21/ :05/23/040/00030/AM21/ 22.05.2020 Applicant

168 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 07.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

54 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

169

Case No.:24/4/81- Party Name: RAJHANS Meet No/Date:4/81- Status:
ALC2/2020 METALS PVT. LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043115 Action by :
:01/81/050/00549/AM21/ :24/24/040/00011/AM21/ 22.05.2020 MSME

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MSME on 29.06.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:26/4/81- Party Name: C L GUPTA Meet No/Date:4/81- Status:
ALC2/2020 EXPORTS LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414256 Action by :
:01/81/050/00551/AM21/ :05/23/040/00032/AM21/ 27.05.2020 Applicant

170 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 03.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:29/4/81- Party Name: MASCOT METAL Meet No/Date:4/81- Status:
ALC2/2020 TRADERS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043118 Action by :
:01/81/050/00554/AM21/ :24/24/040/00012/AM21/ 27.05.2020 Applicant

171 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage.

Case No.:28/4/81- Party Name: STERLITE Meet No/Date:4/81- Status:
ALC2/2020 POWER TRANSMISSION ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310836388 Action by :
:01/81/050/00553/AM21/ :03/95/040/01199/AM20/ 27.05.2020 Applicant

172 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

55 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

173

Case No.:25/4/81- Party Name: TRANSCON Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0910068803 Action by :
:01/81/050/00550/AM21/ :09/24/040/00111/AM21/ 27.05.2020 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:31/4/81- Party Name: AKSHAY Meet No/Date:4/81- Status:
ALC2/2020 ALUMINIUM ALLOYS LLP ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414277 Action by :
:01/81/050/00556/AM21/ :05/23/040/00036/AM21/ 28.05.2020 Applicant

174 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:30/4/81- Party Name: GOLDI SOLAR Meet No/Date:4/81- Status:
ALC2/2020 PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:5210043404 Action by :
:01/81/050/00555/AM21/ :52/21/040/00017/AM21/ 28.05.2020 Applicant

175 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:33/4/81- Party Name: LM WIND Meet No/Date:4/81- Status:
ALC2/2020 POWER BLADES INDIA ALC2/2020 Deferred
PVT. LTD. 17.06.2020
HQ File RLA File Lic.No/Date:3410046106 Action by :
:01/81/050/00558/AM21/ :34/24/040/00048/AM21/ 29.05.2020 Applicant

176 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

56 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:32/4/81- Party Name: SIECHEM Meet No/Date:4/81- Status:
ALC2/2020 TECHNOLOGIES PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410166790 Action by :
:01/81/050/00557/AM21/ :04/24/040/00029/AM21/ 29.05.2020 Applicant

177 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:27/4/81- Party Name: STERLITE Meet No/Date:4/81- Status:
ALC2/2020 POWER TRANSMISSION ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310836416 Action by :
:01/81/050/00552/AM21/ :03/95/040/01032/AM20/ 29.05.2020 Applicant

178 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:43/4/81- Party Name: DISHA AUTO Meet No/Date:4/81- Status:
ALC2/2020 COMPONENTS PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836464 Action by :
:01/81/050/00568/AM21/ :03/94/040/00096/AM21/ 01.06.2020 MSME

179 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to MSME on 08.07.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case No.:34/4/81- Party Name: LEADSTONE Meet No/Date:4/81- Status:
ALC2/2020 ENERGY LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0210209891 Action by :
:01/81/050/00559/AM21/ :02/24/040/00014/AM21/ 01.06.2020 Applicant

180 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

57 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:35/4/81- Party Name: UPR Meet No/Date:4/81- Status:
ALC2/2020 ENGINEERING PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0310836456 Action by :
:01/81/050/00560/AM21/ :03/95/040/00117/AM21/ 01.06.2020 Applicant

181 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:36/4/81- Party Name: URVI BRASS Meet No/Date:4/81- Status:
ALC2/2020 PRODUCTS ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043122 Action by :
:01/81/050/00561/AM21/ :24/24/040/00014/AM21/ 01.06.2020 Applicant

182 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage. The case stands deferred.

Case No.:37/4/81- Party Name: HITECH Meet No/Date:4/81- Status:
ALC2/2020 EXTRUSION LLP ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:2410043123 Action by :
:01/81/050/00562/AM21/ :24/24/040/00013/AM21/ 02.06.2020 Applicant

183 Decision: The Committee considered the case as per agenda and decided to seek from the applicant to furnish following information as per written comments of MSME:

  1. Percentage composition of import and export items.

  2. Step-wise manufacturing process with wastage. The case stands deferred.

Case No.:38/4/81- Party Name: NAMO ALLOYS Meet No/Date:4/81- Status:
ALC2/2020 PVT. LTD. ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414297 Action by :
:01/81/050/00563/AM21/ :05/24/040/00080/AM21/ 02.06.2020 Applicant

184 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

58 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

185

Case No.:39/4/81- Party Name: Meet No/Date:4/81- Status:
ALC2/2020 WINOMECHANIC PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410166794 Action by :
:01/81/050/00564/AM21/ :04/24/040/00026/AM21/ 02.06.2020 Applicant

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:41/4/81- Party Name: ENGINEERS Meet No/Date:4/81- Status:
ALC2/2020 INDIA ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0510414314 Action by :
:01/81/050/00566/AM21/ :05/23/040/00037/AM21/ 03.06.2020 Applicant

186 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:44/4/81- Party Name: RAYZON Meet No/Date:4/81- Status:
ALC2/2020 GREEN ENERGIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:5210043415 Action by :
:01/81/050/00569/AM21/ :52/24/040/00011/AM21/ 03.06.2020 Applicant

187 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:45/4/81- Party Name: RAYZON Meet No/Date:4/81- Status:
ALC2/2020 GREEN ENERGIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:5210043417 Action by :
:01/81/050/00570/AM21/ :52/24/040/00077/AM20/ 03.06.2020 Applicant

188 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

59 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:40/4/81- Party Name: VON ROLL Meet No/Date:4/81- Status:
ALC2/2020 (INDIA) PRIVATE LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710116545 Action by :
:01/81/050/00565/AM21/ :07/24/040/00056/AM21/ 03.06.2020 Applicant

189 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:42/4/81- Party Name: WORTHY Meet No/Date:4/81- Status:
ALC2/2020 ENGINEERING ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0710116549 Action by :
:01/81/050/00567/AM21/ :07/24/040/00058/AM21/ 03.06.2020 Applicant

190 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:47/4/81- Party Name: ICON POWER Meet No/Date:4/81- Status:
ALC2/2020 SOLUTIONS PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0510414336 Action by :
:01/81/050/00572/AM21/ :05/23/040/00041/AM21/ 05.06.2020 Applicant

191 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:46/4/81- Party Name: R R KABEL Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836526 Action by :
:01/81/050/00571/AM21/ :03/95/040/00875/AM20/ 05.06.2020 Applicant

192 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

60 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:48/4/81- Party Name: SHARBIN Meet No/Date:4/81- Status:
ALC2/2020 INTERNATIONAL ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0810147902 Action by :
:01/81/050/00573/AM21/ :08/24/040/00054/AM21/ 05.06.2020 Applicant

193 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application. The case stands deferred.

Case No.:50/4/81- Party Name: NAGREEKA Meet No/Date:4/81- Status:
ALC2/2020 INDCON PRODUCTS (P) ALC2/2020 Deferred
LTD. 17.06.2020
HQ File RLA File Lic.No/Date:0310836580 Action by :
:01/81/050/00575/AM21/ :03/95/040/01148/AM20/ 08.06.2020 Applicant

194 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:49/4/81- Party Name: RAJ METAL Meet No/Date:4/81- Status:
ALC2/2020 INDUSTRIES ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0210209908 Action by :
:01/81/050/00574/AM21/ :02/24/040/00018/AM21/ 08.06.2020 Applicant

195 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:52/4/81- Party Name: RATNAVEER Meet No/Date:4/81- Status:
ALC2/2020 METALS LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:3410046133 Action by :
:01/81/050/00577/AM21/ :34/24/040/00055/AM21/ 09.06.2020 Applicant

196 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

61 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Case No.:51/4/81- Party Name: UNIVERSAL Meet No/Date:4/81- Status:
ALC2/2020 METALLICS PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0510414354 Action by :
:01/81/050/00576/AM21/ :05/24/040/00090/AM21/ 09.06.2020 Applicant

Decision: The Committee considered the case as per agenda and decided to seek from the applicant 197 to furnish following information as per written comments of MSME:

  1. Net content of aluminium in the export product.

  2. Step-wise manufacturing process with wastage.

  3. Certificate of analysis of import items.

Case No.:53/4/81- Party Name: R R KABEL Meet No/Date:4/81- Status:
ALC2/2020 LIMITED ALC2/2020 Deferred
17.06.2020
HQ File RLA File Lic.No/Date:0310836620 Action by :
:01/81/050/00578/AM21/ :03/95/040/00099/AM21/ 10.06.2020 Applicant

198 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

Case No.:54/4/81- Party Name: Meet No/Date:4/81- Status:
ALC2/2020 WINOMECHANIC PRIVATE ALC2/2020 Deferred
LIMITED 17.06.2020
HQ File RLA File Lic.No/Date:0410166814 Action by :
:01/81/050/00579/AM21/ :04/24/040/00037/AM21/ 10.06.2020 Applicant

199 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the applicant and in this regard, an email was sent on 06.07.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application.

62 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Minutes of Offline Cases of Meeting No. 04/81 dated 17.6.2020

SI.<br>No. Applicant’s<br>Name / AA No. HQ/RA File<br>No. Case History Decision Status
ALSTOM<br>PROJECTS<br>INDIA<br>LIMITED<br>0310683926<br>dated<br>29.02.2012 01/81/050/005<br>15/AM12<br>03/94/040/010<br>33/AM12 The Case was rejected in M. No. 18 dt.<br>04.12.2012 due to non-submission of reply.<br>The applicants vide letter dated 09.02.2016<br>furnished reply with a requested to fix the ad-<br>hoc norms. The applicant had also furnished<br>reply dated 21.02.2019 to DHI of deficiency<br>letter dated 23.10.2017 which was forwarded<br>to DHI on 31.05.2019. DHI was reminded on<br>14.08.2019 & 03.10.2019 to expedite the<br>comments. As per NC decision of M. No.<br>13/81 dt. 03.10.2019, a letter was sent to the<br>applicant<br>on<br>28.10.2019<br>followed<br>by<br>reminder dated 23.12.2019 requesting to<br>submit the complete set of application. The<br>applicant submitted the copy of application<br>vide email dated 4.6.2020 which was referred<br>to DHI on the same day. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Based on<br>written<br>comments<br>of<br>DHI,<br>the<br>Committee<br>decided to seek from the<br>applicant the following<br>information:<br>i) Scanned<br>copy<br>of<br>complete<br>set<br>of<br>application<br>alongwith ANF 4A<br>ii) Complete<br>specification<br>of<br>export products<br>iii)The<br>difference<br>between export item<br>No. 1 & 2<br>iv) Sl. No. 4, 5 & 11 of<br>SDL export product<br>wise.<br>The<br>calculation<br>of<br>the<br>requirement of raw<br>material should be<br>supported<br>by<br>dimensional<br>Engineering drawing<br>with<br>relevant<br>dimensions<br>highlighted. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R1
ASTA INDIA<br>PRIVATE<br>LIMITED<br>3410040446<br>dated<br>14.08.2014 01/81/050/003<br>54/AM15<br>34/24/040/000<br>88/AM15/ The case was rejected in M. No. 05/81dated<br>18.06.2015 due to non-submission of reply of<br>deficiency letter dated 11.12.2014.<br>The applicant vide letter dated 07.05.2018<br>furnished the reply with a request to fix the<br>ad-hoc norms. The applicant‟s reply was<br>referred to DPIIT on 13.06.2018 for<br>examination of the case. DPIIT vide U. O.<br>dated 19.07.2019 suggested to call the<br>applicant for personal hearing. The case was<br>considered in M. No. 13/81 dated 04.10.2019<br>and the Committee heard the applicant‟s<br>representative during personal hearing. The<br>Committee directed the representative to<br>furnish some information. As per NC<br>decision, a deficiency letter was sent to the<br>applicant on 28.10.2019. The applicant<br>furnished<br>the<br>reply<br>vide<br>letter<br>dated <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per written comments of<br>DPIIT given vide U.O.<br>No.<br>P-470111/87/2019-<br>TSW<br>dated<br>19.5.2020<br>(copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R2

63 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

27.12.2019 and forwarded to DPIIT on<br>31.01.2020.
ASTA INDIA<br>PRIVATE<br>LIMITED<br>3410040933<br>dated<br>06.02.2015 01/81/050/000<br>79/AM16/DES<br>.II<br>34/24/040/002<br>92/AM15 The case was rejected in M. No. 12/81 dated<br>22.09.2015 due to non-submission of reply of<br>deficiency letter dated 23.06.2015.<br>The applicant vide letter dated 07.05.2018<br>furnished the reply with a request to fix the<br>ad-hoc norms. The applicant‟s representation<br>was referred to DPIIT on 13.06.2018 for<br>examination of the case. DPIIT vide U.O.<br>dated 19.07.2019 suggested to call the<br>applicant for personal hearing. The case was<br>considered in M. No. 13/81 dated 04.10.2019<br>and the Committee heard the applicant‟s<br>representative during personal hearing. The<br>Committee directed the representative to<br>furnish some information. As per NC<br>decision, a deficiency letter was sent to the<br>applicant on 28.10.2019. The applicant<br>furnished<br>the<br>reply<br>vide<br>letter<br>dated<br>27.12.2019 and forwarded to DPIIT on<br>31.01.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per written comments of<br>DPIIT given vide U.O.<br>No.<br>P-470111/87/2019-<br>TSW<br>dated<br>19.5.2020<br>(copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R3
ASTA INDIA<br>PRIVATE<br>LIMITED<br>3410041462<br>dated<br>17.08.2015 01/81/050/004<br>54/AM16/DES<br>.II<br>34/24/040/001<br>37/AM16/ The case was rejected in M. No. 09/81 dated<br>26.07.2016 due to non-submission of reply of<br>deficiency letter dated 26.04.2016.<br>The applicant vide letter dated 07.05.2018<br>furnished the reply with a request to fix the<br>ad-hoc norms. The applicant‟s representation<br>was referred to DPIIT on 13.06.2018 for<br>examination of the case. DPIIT vide U.O.<br>dated 19.07.2019 suggested to call the<br>applicant for personal hearing. The case was<br>considered in M. No. 13/81 dated 04.10.2019<br>and the Committee heard the applicant‟s<br>representative during personal hearing. The<br>Committee directed the representative to<br>furnish some information. As per NC<br>decision, a deficiency letter was sent to the<br>applicant on 28.10.2019. The applicant<br>furnished<br>the<br>reply<br>vide<br>letter<br>dated<br>27.12.2019 and forwarded to DPIIT on<br>31.01.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per written comments of<br>DPIIT given vide U.O.<br>No.<br>P-470111/87/2019-<br>TSW<br>dated<br>19.5.2020<br>(copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R4
ASTA INDIA<br>PRIVATE<br>LIMITED<br>3410042077<br>dated<br>18.04.2016 01/81/050/002<br>60/AM17<br>34/24/040/002<br>13/AM16/ The case was rejected in M. No. 26/81 dated<br>21.03.2017 due to non-submission of reply of<br>deficiency letter dated 14.12.2016.<br>The applicant vide letter dated 07.05.2018<br>furnished the reply with a request to fix the<br>ad-hoc norms. The applicant‟s representation<br>was referred to DPIIT on 17.09.2018 for<br>examination of the case. DPIIT vide U.O.<br>dated 19.07.2019 suggested to call the<br>applicant forpersonal hearing. The case was <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per written comments of<br>DPIIT given vide U.O.<br>No.<br>P-470111/87/2019-<br>TSW<br>dated<br>19.5.2020<br>(copy enclosed). <br> <br> <br> <br> <br> <br> <br>Approved
R5

64 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

considered in M. No. 13/81 dated 04.10.2019<br>and the Committee heard the applicant‟s<br>representative during personal hearing. The<br>Committee directed the representative to<br>furnish some information. As per NC<br>decision, a deficiency letter was sent to the<br>applicant on 28.10.2019. The applicant<br>furnished<br>the<br>reply<br>vide<br>letter<br>dated<br>27.12.2019 and forwarded to DPIIT on<br>31.01.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br>
BC<br>INSTRUMENT<br>S INDIA<br>PRIVATE<br>LIMITED KASEZ/100%<br>EOU/II/46/200<br>3-04/Vol.I-941 <br>The applicant requested for fixation of<br>wastage norms in respect of machined<br>components<br>under<br>100%<br>EOU.<br>The<br>applicant‟s representation was referred to<br>DPIIT on 23.05.2018. The complete set of<br>application was again sent to DPIIT on<br>01.11.2019 for examination of the case. The<br>case was last considered in M. No. 19/81 dt.<br>26.12.2019 and decided to seek from the<br>applicant to furnish some information as per<br>advice of representative of DPIIT. As per NC<br>decision, a deficiency letter was sent to the<br>applicant on 28.01.2020. However, no reply<br>has been received yet. Information received<br>from<br>the<br>applicant<br>vide<br>email<br>dated<br>17.6.2020 has been forwarded to DPIIT for<br>comments on 27.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R6
LEITWIND<br>SHRIRAM<br>MANUFACTU<br>RING LIMITED<br>0410147961<br>dated<br>15.07.2013 <br>01/81/050/001<br>94/AM14<br>04/24/040/000<br>71/AM14 The case was rejected in M. No. 05 dt.<br>03.06.2014 due to non-submission of reply of<br>deficiency letter dated 30.10.2013.<br>The applicant requested for fixation of<br>norms. As per NC decision of M. No. 13/81<br>dt. 03.10.2019, the case was referred to<br>DPIIT on 01.11.2019 followed by a reminder<br>on 23.12.2019 for expediting the comments.<br>The case was last considered in M. No. 22/81<br>dt. 19.2.2020. As per decision of the<br>committee, DPIIT has been reminded on<br>14.4.2020, <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and directed<br>the<br>section<br>to<br>send<br>complete<br>set<br>of<br>application alongwith list<br>of import and export<br>items<br>and<br>reply/information<br>received<br>from<br>the<br>applicant to DPIIT as<br>requested by it vide U.O.<br>No.<br>P-470111/86/2020-<br>TSW dated 22.5.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R7
BHARAT<br>HEAVY<br>ELECTRICALS<br>LIMITED<br>0510259435<br>dated<br>25.02.2010 <br>01/81/050/005<br>78/AM10<br>05/23/040/001<br>76/AM10 BHEL<br>obtained<br>AA<br>for<br>import<br>of<br>components viz. Vibration Isolation Spring,<br>Spares for Angle Drain Valves etc. against<br>export/supply of Vibration Isolation System<br>for TG Foundation/ Steam Drain Systems to<br>Thermal Power Plants. The case was rejected<br>in M. No.14/81 dated 09.10.2012 reiterating<br>the decision taken in M. No. 12/13 dated<br>04.09.2012 on the grounds that the goods<br>imported under this AA have been supplied<br>„as such‟ and hence not covered under <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted that<br>Policy<br>Interpretation<br>Committee in its meeting<br>held on 9.6.2020 has<br>decided that such supplies<br>would be admissible as<br>deemed export and also<br>eligible<br>for<br>Advance<br>Authorization. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R8

65 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

deemed export supplies as per PC 50 dt.<br>28.12.2011.<br>However,<br>the<br>applicant<br>represented<br>against<br>the<br>rejection<br>and<br>submitted detailed literature and drawings.<br>The case was referred to DHI on 25.09.2019<br>for examination. The case was considered in<br>M. No. 13/81dated 04.10.2019 and decided<br>to place the matter before the PIC. The case<br>was discussed with Chairman NC-2 and it<br>was observed that the similar cases of the<br>applicant was placed before the PIC in its<br>meeting held on 16.07.2019 where in the<br>cases were decided in general with the<br>observation that „such supplies would be<br>admissible as deemed export and should be<br>eligible for AA‟. On the basis of the<br>recommendations of PIC, the cases were<br>approved in NC Meeting No. 09/81 dated<br>07.08.2019. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee decided to refer the case to PIC to<br>have clarity on the admissibility of such AA<br>in view of PC 50 dt. 28.12.2011. The case<br>was referred to PIC on 21.01.2020. The case<br>was discussed in PIC meeting held on<br>9.6.2020. Minutes of the PIC meeting have<br>been received. As per decision taken in<br>Meeting No. 22 dated 19.2.2020, reminder<br>was issued to DHI on 14.04.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Therefore, the Committee<br>decided to fix the ad-hoc<br>norms on repeat basis as<br>approved for AA No.<br>0510305231<br>dated<br>14.10.2011as per written<br>comments given by DHI<br>as under:<br>1. Quantity of import<br>items at Sl. No. 1 &<br>3 may be allowed<br>as per GN-4.<br>2. Import item at Sl.<br>No.<br>2<br>may<br>be<br>deleted<br>as<br>not<br>covered<br>under<br>import policy.<br>3. Quantity of import<br>item at Sl. No. 4<br>may be allowed as<br>perimport policy<br>for spares.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
BHARAT<br>HEAVY<br>ELECTRICALS<br>LIMITED<br>0510249536<br>dated<br>17.09.2009 <br>01/80/050/004<br>76/AM10<br>05/23/040/000<br>34/AM10 BHEL<br>obtained<br>AA<br>for<br>import<br>of<br>components viz. „Generator Circuit Breaker‟<br>including all associated series isolator, Earth-<br>switches surge cap & SFC connection for<br>GTG‟ against export/supply of „Generator<br>Circuit Breaker for TG‟. The case was<br>rejected in M. No. 14 dt. 06.07.2010 as per<br>the written comments of DHI vide U. O. No.<br>3(17)/2009/TSW(B) dated 26.05.2010. The<br>applicant requested for fixation of ad-hoc<br>norms. The case was rejected in M. No.<br>14/81 dated 09.10.2012 reiterating the<br>decision similar cases of BHEL taken in M.<br>No. 12/13 dated 04.09.2012 on the grounds<br>that the goods imported under this AA have<br>been supplied „as such‟ and hence not<br>covered under deemed export supplies as per<br>PC 50 dt. 28.12.2011. However, the applicant<br>represented<br>against<br>the<br>rejection<br>and<br>submitted detailed literature. The case was<br>referred<br>to<br>DHI<br>on<br>25.09.2019<br>for<br>examination. The case was considered in M.<br>No. 13/81dated 04.10.2019 and decided to <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted that<br>Policy<br>Interpretation<br>Committee in its meeting<br>held on 9.6.2020 has<br>decided that such supplies<br>would be admissible as<br>deemed export and also<br>eligible<br>for<br>Advance<br>Authorization.<br>Therefore, the Committee<br>decided to fix the ad-hoc<br>norms on repeat basis as<br>approved for AA No.<br>0510305232<br>dated<br>14.10.2011 as per written<br>comments given by DHI<br>as under:<br>1. Quantity of import<br>item<br>may<br>be<br>allowed onnet to <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R9

66 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

R10 R10 pproved pproved
place the matter before the PIC. The case w<br>discussed with Chairman NC-2 and it w<br>observed that the import products<br>Generator Circuit Breaker including<br>associated series which are not clear. Hen<br>it was decided to call the applicant for PH<br>the meeting to explain the case bef<br>referring to PIC. A PH letter was sent to<br>applicant on 20.12.2019. The Commit<br>heard the applicant‟s representative duri<br>personal hearing in Meeting No. 19/81 da<br>26.12.2019 and decided to refer the case<br>PIC to have clarity on the admissibility<br>such AA in view of PC 50 dt. 28.12.20<br>The case was referred to PIC on 28.01.20<br>The case was discussed in PIC meeting h<br>on 9.6.2020. Minutes of the PIC meeti<br>have been received. As per decision taken<br>Meeting No. 22 dated 19.2.2020, remin<br>was issued to DHI on 14.04.2020. as<br>as<br>are<br>all<br>ce,<br>in<br>ore<br>the<br>tee<br>ng<br>ted<br>to<br>of<br>11.<br>20.<br>eld<br>ng<br>in<br>der <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>net<br>basis<br>with<br>accountability<br>clauseunderGN-4<br>excluding tools &<br>tackles.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br>
<br>BHARA<br>HEAVY<br>ELECTRIC<br>LIMITE T<br> <br>ALS<br>D <br>01/81/050<br>68/AM1 /004<br>1 BHEL<br>obtained<br>AA<br>for<br>import<br>components viz. Vibration Isolation Spri<br>Spares for Angle Drain Valves etc. agai<br>export/supply of Vibration Isolation Syst<br>for TG Foundation/ Steam Drain Systems<br>Thermal Power Plants. The case was rejec<br>in M. No. 12/81 dated 11.09.2012 on<br>grounds that the goods imported under t<br>AA have been supplied „as such‟ and hen<br>not covered under deemed export supplies<br>per PC 50 dt. 28.12.2011. However,<br>applicant represented against the rejecti<br>and<br>submitted<br>detailed<br>literature<br>a<br>drawings. The case was referred to DHI<br>03.10.2019 for examination. The case w<br>considered in M. No. 13/81dated 04.10.20 of<br>ng,<br>nst<br>em<br>to<br>ted<br>the<br>his<br>ce<br>as<br>the<br>on<br>nd<br>on<br>as<br>19 <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted that<br>Policy<br>Interpretation<br>Committee in its meeting<br>held on 9.6.2020 has<br>decided that such supplies<br>would be admissible as<br>deemed export and also<br>eligible<br>for<br>Advance<br>Authorization.<br>Therefore, the Committee<br>decided to fix the ad-hoc<br>norms on repeat basis as<br>approved for AA No.<br>0510305231<br>dated <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>A pproved
R10
and decided to place the matter before the <br>14.10.2011as per written
0510280963<br>dated<br>05.01.2011 05/23/04<br>59/AM 0/002<br>11 <br>PI<br>NC<br>cas <br>C. The case was discussed w<br>-2 and it was observed th<br>es of the applicant was plac <br>ith Chairman<br>at the similar<br>ed before the <br> <br> <br> <br><br>comments<br>as under: <br>given by DHI <br>
<br>PI <br>C in its meeting held on 16.0 <br>7.2019 where <br> <br>1. Quanti ty of import
<br>in the cases were decided in general with the<br>observation that „such supplies would be<br>admissible as deemed export and should be<br>eligible for AA‟. On the basis of the <br> <br> <br> <br> <br> <br>items at Sl. No. 1 &<br>3 may be allowed<br>as per GN-4.<br>2. Import item at Sl. <br> <br> <br>
recommendations of PIC, the cases w<br>approved in NC Meeting No. 9/81 da<br>07.08.2019. Hence, it was directed to pla<br>the case in NC-2 meeting before referring<br>case to PIC. The case was last considered<br> ere<br>ted<br>ce<br>the<br>in<br> <br> <br> <br> <br> <br> <br>No.<br>2<br>may<br>be<br>deleted<br>as<br>not<br>covered<br>under<br>import policy.<br>3. Quantity of import<br> <br> <br> <br> <br>
M. No. 19/81dated 26.12.2019 and decided<br>to refer the case to PIC to have clarityon the <br> <br>item at Sl. No. 4<br>maybe allowed as <br>

67 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

admissibility of such AA in view of PC 50 dt.<br>28.12.2011. The case was referred to PIC on<br>28.01.2020. The case was discussed in PIC<br>meeting held on 9.6.2020. Minutes of the PIC<br>meeting have been received. As per decision<br>taken in Meeting No. 22 dated 19.2.2020,<br>reminder has been issued to DHI on<br>14.04.2020. <br> <br> <br> <br> <br> <br> <br>perimport policy<br>for spares.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br>
BHARAT<br>HEAVY<br>ELECTRICALS<br>LIMITED<br>0510248210<br>dated<br>24.08.2009 <br>01/80/050/003<br>29/AM10/DES<br>-II/<br>05/24/040/002<br>07/AM10/ BHEL<br>obtained<br>AA<br>for<br>import<br>of<br>components viz. „Generator Circuit Breaker‟<br>including all associated series isolator, Earth-<br>switches surge cap & SFC connection for<br>GTG‟ against export/supply of „Generator<br>Circuit Breaker for TG‟. The case was<br>rejected in M. No. 45 dt. 01.02.2010 due to<br>non-submission of reply. The applicant<br>requested for fixation of norms. The case was<br>rejected in M. No.14/81 dated 09.10.2012<br>reiterating the decision in similar cases of<br>BHEL taken in M. No. 12/13 dated<br>04.09.2012 on the grounds that the goods<br>imported under this AA have been supplied<br>„as such‟ and hence not covered under<br>deemed export supplies as per PC 50 dt.<br>28.12.2011. However, the applicant vide<br>letter dated 22.5.2017 represented against the<br>rejection and submitted detailed literature.<br>The representation was referred to DHI on<br>09.09.2019. The case was considered in M.<br>No. 13/81dated 04.10.2019 and decided to<br>place the matter before the PIC. The case was<br>discussed with Chairman NC-2 and it is<br>observed that the import products are<br>Generator Circuit Breaker including all<br>associated series which are not clear. Hence,<br>it was directed to call the applicant for PH in<br>the meeting to explain the case before<br>referring to PIC. A PH letter was sent to the<br>applicant on 20.12.2019. The Committee<br>heard the applicant‟s representative during<br>personal hearing in M. No. 19/81 dated<br>26.12.2019 and decided to refer the case to<br>PIC to have clarity on the admissibility of<br>such AA in view of PC 50 dt. 28.12.2011.<br>The case was referred to PIC on 28.01.2020.<br>Minutes of the PIC meeting have been<br>received. The case was discussed in PIC<br>meeting held on 9.6.2020. As per decision<br>taken in Meeting No. 22 dated 19.2.2020,<br>reminder has been issued to DHI on<br>14.04.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted that<br>Policy<br>Interpretation<br>Committee in its meeting<br>held on 9.6.2020 has<br>decided that such supplies<br>would be admissible as<br>deemed export and also<br>eligible<br>for<br>Advance<br>Authorization.<br>Therefore, the Committee<br>decided to fix the ad-hoc<br>norms on repeat basis as<br>approved for AA No.<br>0510305232<br>dated<br>14.10.2011<br>for<br>import<br>item at Sl. No. 1as per<br>written comments given<br>by DHI as under:<br>1. Quantity of import<br>item at Sl. No. 1 may<br>be allowed onnet to<br>net<br>basis<br>with<br>accountability<br>clauseunderGN-4<br>excluding tools &<br>tackles.<br>2. Quantity of import<br>item at Sl. No. 2 may<br>be<br>allowed<br>under<br>GN-4<br>with<br>accountably clause.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R11
R12 BHARAT 01/81/050/003 BHEL<br>obtained<br>AA<br>for<br>import<br>of The<br>Committee Approved

68 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020
HEAVY<br>ELECTRIC<br>LIMITE<br>05103101<br>dated<br>02.12.201 <br>ALS<br>D<br>97<br>1 <br>95/AM1<br>05/23/040/<br>21/AM1 2<br>003<br>2 components viz. „Cranking Switch‟ agai<br>export/supply<br>of<br>„Generator<br>Starti<br>System‟. The case was rejected in<br>No.13/81 dated 25.09.2012 reiterating t<br>decision in similar cases of BHEL taken<br>M. No. 12/13 dated 04.09.2012 on<br>grounds that the goods imported under t<br>AA have been supplied „as such‟ and hen<br>not covered under deemed export supplies<br>PC 50 d 28122011 H nst<br>ng<br>M.<br>he<br>in<br>the<br>his<br>ce<br>as<br>h <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>considered the case as per<br>the agenda and noted that<br>Policy<br>Interpretation<br>Committee in its meeting<br>held on 9.6.2020 has<br>decided that such supplies<br>would be admissible as<br>deemed export and also<br>eligible<br>for<br>Advance<br>Ahii <br> <br> <br> <br> <br> <br> <br> <br>
per t. ... owever,<br>applicant<br>vide<br>letter<br>dated<br>22.5.20<br>represented<br>against<br>the<br>rejection<br>a<br>submitted<br>detailed<br>literature.<br>T<br>representation was referred to DHI<br>09.09.2019. The case was considered in<br>No. 13/81dated 04.10.2019 and decided<br>seek from the applicant to furnish so<br>information as per advice of representative<br>DHI. D/L was sent to the applicant<br>28.10.2019 and reply against D/L w<br>referred to DHI on 04.11.2019. The case a<br>was discussed with Chairman NC-2 and<br>was observed that the import products<br>Generator Circuit Breaker including<br>associated series which are not clear. Hen<br>it was directed to call the applicant for PH<br>the meeting to explain the case. A PH let<br>was sent to the applicant on 20.12.2019. T<br>Committee<br>heard<br>the<br>applican<br>representative during personal hearing in<br>No. 19/81 dated 26.12.2019 and decided<br>refer the case to PIC to have clarity on t<br>admissibility of such AA in view of PC 50<br>28.12.2011. The case was referred to PIC<br>28.01.2020. The case was discussed in P<br>meeting held on 9.6.2020. Minutes of the P<br>meeting have been received. As per decisi<br>taken in Meeting No. 22 dated 19.2.20<br>reminder has been issued to DHI e<br>17<br>nd<br>he<br>on<br>M.<br>to<br>me<br>of<br>on<br>as<br>lso<br>it<br>are<br>all<br>ce,<br>in<br>ter<br>he<br>t‟s<br>M.<br>to<br>he<br>dt.<br>on<br>IC<br>IC<br>on<br>20,<br>on <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>utorzaton.<br>Therefore, the Committee<br>decided to fix the ad-hoc<br>norms as per written<br>comments given by DHI<br>as under:<br>1. Quantity of import<br>item<br>may<br>be<br>allowed onnet to<br>net<br>basis<br>with<br>accountably clause<br>underGN-4.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br>
<br>14.04.2020.
VEEKA<br>SMELTE<br>PVT. LT<br>26100127<br>dated<br>15.12.201 Y<br>RS<br>D.<br>79<br>6 01/81/050/<br>24/AM1<br>26/24/040/<br>19/AM1 005<br>7/<br>000<br>7/ The case was ratified in Meeting No. 2/<br>dated<br>29.05.2018<br>(actually<br>held<br>18.07.2018) as per MoS comments vide th<br>UO No. 2(6)/2018-TD dated 12.06.20<br>allowing 632kg Aluminium granules<br>69ina of Low Carbon ferro Chrome throu<br>thermite process. The applicant vide let<br>dated 25.02.2020 stated that it is not possi<br>to manufacture Low Carbon Ferro Chrome<br>export Grade with using just 632 Kgs 81<br>on<br>eir<br>18<br>per<br>gh<br>ter<br>ble<br>of<br>Of <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per<br>written<br>comments<br>given<br>by<br>Consultant<br>(SKB) (copy enclosed).<br>Concerned RA may take<br>consequential<br>action <br> <br> <br> <br> <br> <br> <br> <br>A pproved
R13
.<br>Aliminium granules. Therefore, they have<br>requested for revision withpersonal hearing. <br> <br> <br> <br> <br>accordingly.

69 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

The representation was referred to Consultant<br>(SKB)on 03.03.2020.
VEEKAY<br>SMELTERS<br>PVT. LTD.<br>2610012763<br>dated<br>14.07.2016 01/81/050/006<br>59/AM17/<br>26/24/040/000<br>11/AM17/ The case was ratified in Meeting No. 1/81<br>dated<br>15.05.2018<br>(actually<br>held<br>on<br>16.06.2018) as per MoS comments vide their<br>UO No. 2(6)/2018-TD dated 12.06.2018<br>allowing 632kg Aluminium Granules per<br>70ina of Low Carbon Ferro Chrome through<br>thermite process. The applicant vide letter<br>dated 25.02.2020 stated that it is not possible<br>to manufacture Low Carbon Ferro Chrome of<br>export Grade with using just 632 Kgs. Of<br>Aliminium granules. Therefore, they have<br>requested for revision with personal hearing.<br>The representation was referred to Consultant<br>(SKB)on 03.03.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per<br>written<br>comments<br>given<br>by<br>Consultant<br>(SKB) (copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br>Approved
R14
VEEKAY<br>SMELTERS<br>PVT. LTD.<br>2610012767<br>dated<br>17.08.2016 01/81/050/004<br>09/AM17/<br>26/24/040/000<br>15/AM17/ The case was ratified in Meeting No. 1/81<br>dated<br>15.05.2018<br>(actually<br>held<br>on<br>14.06.2018) as per MoS comments vide their<br>UO No. 2(6)/2018-TD dated 12.06.2018<br>allowing 632kg Aluminium Granules per<br>70ina of Low Carbon Ferro Chrome through<br>thermite process. The applicant vide letter<br>dated 25.02.2020 stated that it is not possible<br>to manufacture Low Carbon Ferro Chrome of<br>export Grade with using just 632 Kgs. Of<br>Aliminium granules. Therefore, they have<br>requested for revision with personal hearing.<br>The representation was referred to Consultant<br>(SKB)on 03.03.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per<br>written<br>comments<br>given<br>by<br>Consultant<br>(SKB) (copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br>Approved
R15
Veer-O-Metals<br>Private Limited<br>0710112458<br>dated<br>24.11.2017 01/81/050/005<br>79/AM19/<br>07/24/040/002<br>16/AM18/ The case was ratified in M. No. 10/81-<br>ALC2/2018 dated 16.01.2019 as per written<br>comments given by Consultant (TEC-3). The<br>applicant vide letter dated 10.02.2020 stated<br>that only one chassis OM-1015C-R6 for<br>export product is mentioned in the ratified<br>minutes of meeting no. 10/81 dt. 16.01.2019,<br>whereas, there are multiple chassis for the<br>same<br>product<br>„Sheet<br>Metal<br>Product‟.<br>Therefore, they have requested for revision.<br>The representation was referred to Consultant<br>(SKB)on 25.02.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per<br>written<br>comments<br>given<br>by<br>Consultant<br>(SKB) (copy enclosed).<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br>Approved
R16

70 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Vedanta Limited<br>(Formerly M/S.<br>Sterlite<br>Industries<br>(India) Limited<br>3510030450<br>dated<br>03.06.2010 <br>01/81/050/000<br>55/AM11/DES<br>.II<br>35/24/040/000<br>46/AM10/ The case was rejected in M. No. 26/81-<br>ALC2/2010 dated 28.09.2010 as per written<br>comments of M/o Mines vide OM No.<br>4/(16)/2010-Metal-III/L dated 17.09.2010.<br>The applicant‟s representation received on<br>14.02.2019 with a request to fix the ad-hoc<br>norms. The case was decided to examine on<br>file along with written comments of MSME<br>in M. No. 23/81 dated 28.01.2014. The case<br>was referred to Consultant (TEC-3) for<br>examination. As per NC decision of M. No.<br>16/81<br>dt.<br>13.11.2019<br>and<br>19/81<br>dt.<br>26.12.2019, the applicant was called for<br>personal hearing to explain the case and<br>nobody was appeared for PH.As per NC<br>decision, an email was again sent to the<br>applicant on 30.01.2020 to attend personal<br>hearing<br>on<br>19.02.2020.The<br>Committee<br>considered the case in M.No. 22 dated<br>19.2.2020<br>and<br>heard<br>the<br>applicant‟s<br>representative during personal hearing. The<br>Committee directed to the representative to<br>furnish following information as per advice<br>of Consultant (TEC-3):<br>1. Material Balance sheet.<br>2. Manufacturing processes with stage-<br>wise wastage of all three materials.<br>3. Composition of raw materials.<br>Information received from the applicant<br>vide email dated 2.4.2020 has been referred<br>to Consultant TEC-3 on7.4.2020 and<br>27.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>agenda and Consultant<br>(TEC-3)<br>asked<br>for<br>physical file to examine<br>the case. Therefore, the<br>Committee<br>deicide<br>to<br>send<br>physical<br>file<br>to<br>Consultant (TEC-3) for<br>examination of the case. <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R17

71 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Th d i M 24/81 dd Th d i M 24/81 dd Th d i M 24/81 dd Th d i M 24/81 dd e<br>e<br>l<br> <br> <br>t<br>e<br>e<br> <br>r<br>Deferred<br>s<br>d
e case was rejecte n . No. ate<br>14.09.2010 due to non-submission of reply. <br>
<br>The applicant vide letters dated 27.12.2016, <br>
<br>05.06.2017 and 01.07.2017 had requested to<br>ratify the norms. The representation dated <br> <br>
<br>01.07.2017 was forwarded to DHI on <br>
06.07.2017 for examination of the case. In<br>M. No. 04/81-Pt.II dated 03.10.2018, the <br>
Committee noted that DHI vide U.O. No.
CR<br>G<br>L OMPTO<br>REAVES<br>IMITED N<br> <br> 01/81/050/006<br>24/AM08 3/82/2018 dated 13.03.2018 had offered the<br>written comments and recommended the<br>norms on repeat with AA No. 0310343657<br>dated 19.08.2005. However, it was decided to<br>examine the case on file. The Case was <br> <br> <br> <br> <br>The Committee heard th<br>representatives<br>of<br>th<br>applicant during persona<br>hearing<br>held<br>through<br>id fi O
referred<br>to<br>Consultant<br>(TEC-3)<br>on <br>veo conerencng.<br>th di f Cnltn
03 1044438<br>dated 2 03/94/040/006<br>34/AM08 25.09.2019 & 01.11.2019. Consultant (TEC-<br>3) on 04.11.2019 stated that input norms <br>e avce o osua<br>(TEC-3), the Committe<br>directed<br>th
<br>26092007 export of refurbished items cannot be worked <br> <br> <br>reresentatives to furnis
.. out<br>as<br>details<br>of<br>parts<br>which<br>need<br> <br> <br>p<br>information<br>in<br>tabula
repair/replacement is not known and scrap<br>value of old parts cannot be ascertained. In<br> <br> <br> <br> <br> <br> <br>form as given below:
R18
M. No. 19/81 dt. 26.12.2019, it was decided<br>to call the applicant on personal hearing. As<br> <br> <br>
per NC decision, an email was sent to the<br>applicant on 30.01.2020 to attend personal<br> <br> <br>
hearing on 19.02.2020. Nobody appeared for<br>PH in M.No. 22 dated 19.2.2020. The<br>applicant<br>via<br>email<br>dated<br>07.07.2020<br>informed that they will attend PH on 9thJuly<br>2.30pm. <br> <br> <br>
To s ubmit the information as per tabular form as given below:
Sl.<br>No.
Item<br>impor<br> of<br>t with<br> Quantity Calculation of<br>quantity<br> Details of old<br>items to be Quantity<br>of<br>items to be Commercial<br>value of item s<br>d
specif ication asked for with<br>supporting<br>documents replaced replaced to be replace<br>with<br>supporting<br>documents
The case stan ds deferred.
The Case was rejected in M. No.15 dt. <br>The Committee decided <br> <br>Deferred
T XMAC 03.11.2015 due to non submission of reply of <br>to<br>remind<br>DPIIT<br>to
<br> <br>AIL & DHI deficiency letter dated 14.08.2015. The <br>expedite the comments.
<br>ENG <br>INEERI NG <br>01/81/050/001 applicant vide letter dated 27.01.2016 had
<br>L <br>IMITED <br> <br>25/AM15 requested the RA, Kolkata for amendment of
R19 <br> <br> <br> 02/24/040/001 AA. The copy of licence amendment sheet<br>dated 25.05.2016 along with representation <br>
02<br>26 019685<br>dated<br>.11.2013 <br> 38/AM14 <br>was forwarded to DHI for examination. DHI<br>on 04.11.2016 advised to consult with DPIIT<br>or ratify under SION C-1647. The case was <br> <br> <br>
referred to DPIIT on 21.08.2017. The

72 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

Committee in M. No. 4 /81-Pt.II dated<br>03.10.2018 decided to call the applicant for<br>personal hearing. The PH letter was sent to<br>the applicant on 23.09.2019 to appear before<br>NC in M. No.13/81 dated 03.10.2019<br>(actually held on 04.10.2019), as per NC<br>decision, another dated of personal hearing<br>was granted. A letter was sent to the<br>applicant on 31.10.2019 to attend personal<br>hearing on 13.11.2019. In M. No. 16/81 dt.<br>13.11.2019,<br>the<br>Committee<br>heard<br>the<br>applicant‟s representative during personal<br>hearing and noted that authorisation was<br>amended after its issuance. However, the<br>representatives could not explain the present<br>details of export and import items. Therefore,<br>the Committee directed to the representative<br>to submit some information. As per NC<br>decision, D/L was issued to the applicant on<br>12.12.2019 followed by a reminder on<br>27.01.2020. Information received from the<br>applicant vide email dated 3.4.2020 has been<br>referred to DPIIT on 1.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
NATIONAL<br>STEEL<br>AND<br>AGRO<br>INDUSTRIES<br>LIMITED<br>5610005277<br>dated<br>18.12.2017 <br>01/81/050/001<br>46/AM19/<br>56/24/040/000<br>31/AM18/ This case was rejected in M. No. 12/81 dated<br>13.02.2019 due to non-submission of reply to<br>deficiency letter dated 04.10.2018 raised by<br>MoS. The applicant vide letter dated<br>14.05.2019 enclosed a copy of their earlier<br>reply dated 17.07.2018 stating that they had<br>already replied on 17.07.2018 and requested<br>to ratify the norms. As per decision of M. No.<br>13/81dated 04.10.2019, the case was referred<br>to Consultant (TEC-3) on 01.11.2019 as<br>comments from MoS were not coming. In M.<br>No. 16/81 dt. 13.11.2019, the Committee<br>noted the comments furnished by MoS vide<br>U.O. No. 2(17)/2019-TD dated 08.11.2019 as<br>well as comments of Consultant (TEC-3) and<br>decided to seek from the applicant the<br>following<br>information:<br>(i)<br>Stage<br>wise<br>wastage<br>of<br>import<br>item<br>No.<br>1.<br>(ii)<br>Justification for import item 6 i.e. GP sheet<br>for packing when one of the export product is<br>also GP sheet. As per NC decision, D/L was<br>sent to the applicant on 12.12.2019. The case<br>was last considered in M. No. 19/81 dt.<br>26.12.2019 and decided to ask from MoS and<br>the party to clarify both the points. A<br>reminder was also sent to the applicant on<br>27.01.2020. However, no reply has been<br>received yet. As per NC decision taken in<br>MeetingNo. 22 dated 19.2.2020,reminder <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>grant last opportunity to<br>the applicant to furnish<br>the requisite information. <br> <br> <br> <br> <br>Deferred
R20

73 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

has been sent to applicant on 01.04.2020.
SHIVALIK<br>BIMETAL<br>CONTROLS<br>LTD.<br>0510399656<br>dated<br>08.09.2016 01/81/050/003<br>97/AM17/<br>05/24/040/002<br>87/AM17/ The case was ratified in M. No. 13/81 dated<br>19.09.2017 as per DIPP comments vide U. O.<br>No.12/68/2017-TSW/45 dated 19.09.2017.<br>The applicant vide letter dated 25.01.2018<br>had requested for revision of ratified norms.<br>In M. No. 16/81 dt. 13.11.2019, the<br>Committee noted that nobody appeared for<br>personal hearing on behalf of the applicant<br>and granted another date for personal<br>hearing. As per NC decision, a letter was<br>again sent to the applicant to attend PH on<br>26.12.2019. The Committee heard the<br>applicant‟s representative during personal<br>hearing in M. No. 19/81 dt. 26.12.2019 and<br>decided to refer the case to DPIIT for further<br>examination. As per NC decision, the case<br>was referred to DPIIT on 31.01.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted the<br>written<br>comments<br>of<br>DPIIT given vide U.O.<br>No.<br>P-470111/80/2019-<br>TSW dated 26.5.2020.<br>The<br>Committee<br>also<br>noted the applicant has<br>applied two import items<br>whereas<br>DPIIT<br>has<br>allowed import item No.<br>1 only. No comments<br>have been given in r/o<br>import<br>item<br>No.<br>2.<br>Hence, the Committee<br>decided to refer back the<br>matter again to DPIIT for<br>re-examination.<br>The<br>Committee<br>also<br>noted<br>that the applicant has<br>demanded<br>significantly<br>higher wastage than that<br>recommended by DPIIT.<br>Hence,<br>it<br>was<br>also<br>decided<br>to<br>ask<br>the<br>applicant<br>to<br>justify<br>wastages as demanded.<br>The case stands deferred. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R21
SHIVALIK<br>BIMETAL<br>CONTROLS<br>LTD.<br>0510398533<br>dated<br>17.05.2016 01/81/050/001<br>97/AM17/<br>05/24/040/000<br>45/AM17/ The case was ratified in M. No. 3/81-<br>ALC2/2018 dated 14.08.2018 on repeat basis<br>as approved for AA No. 0510402399 dated<br>01.05.2017<br>ratified<br>in<br>M.No.11/81/ALC2/2017 dated 22.08.2017.<br>The applicant‟s representation received on<br>22.11.2018 with a request for revision of<br>ratified norms. As per NC decision of M. No.<br>15/81 dt. 30.10.2019, a letter was sent to the<br>applicant to attend PH on 13.11.2019. The<br>Committee again called the applicant for<br>personal hearing as nobody was appeared for<br>personal hearing in M. No. 16/81 dt.<br>13.11.2019. As per NC decision, an email<br>was sent to the applicant to attend PH on<br>26.12.2019. The Committee heard the<br>applicant‟s representative during personal<br>hearing in M. No. 19/81 dt. 26.12.2019 and<br>decided to refer the case to DPIIT for further<br>examination. As per NC decision, the case<br>was referred to DPIIT on 12.02.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and noted the<br>written<br>comments<br>of<br>DPIIT given vide U. O.<br>No.<br>P-470111/80/2019-<br>TSW dated 26.5.2020.<br>The<br>Committee<br>also<br>noted the applicant has<br>applied two import items<br>whereas DPIIT has given<br>comments for four import<br>items.<br>Hence,<br>the<br>Committee<br>decided<br>to<br>refer back the matter<br>again to DPIIT for re-<br>examination.<br>The<br>Committee<br>also<br>noted<br>that the applicant has<br>demanded<br>significantly<br>higher wastage than that <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R22

74 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

||||However, no comments have been received<br>yet.|<br>recommended by DPIIT.<br>Hence,<br>it<br>was<br>also<br>decided<br>to<br>ask<br>the<br>applicant<br>to<br>justify<br>wastages as demanded.<br>The case stands deferred.|<br> <br> <br>|
|---|---|---|---|---|---|
||SHIVALIK<br>BIMETAL<br>CONTROLS<br>LTD.<br>0510405797<br>dated<br>07.03.2018|01/81/050/001<br>74/AM19/<br>05/24/040/006<br>06/AM18/|The case was ratified in M. No. 3/81-<br>ALC2/2018 dated 14.08.2018. The applicant<br>vide letter dated 18.06.2019 had stated that<br>the norms was ratified as per SION C-397<br>but the export item is different. They had,<br>therefore, requested to review the decision<br>and requested for personal hearing. As per<br>NC decision of M. No. 15/81 dt. 30.10.2019,<br>an email dated 31.10.2019 sent to the<br>applicant to attend PH on 13.11.2019. In M.<br>No. 16/81 dt. 13.11.2019, the Committee<br>noted that nobody was appeared for personal<br>hearing on behalf of the applicant and the<br>Committee granted another date for personal<br>hearing. As per NC decision, a letter was sent<br>to the applicant to attend PH on 26.12.2019.<br>The<br>Committee<br>heard<br>the<br>applicant‟s<br>representative during personal hearing in M.<br>No. 19/81 dt. 26.12.2019 and decided to refer<br>the case to Consultant (TEC-3) for further<br>examination. As per decision, the case was<br>referred<br>to<br>Consultant<br>(TEC-3)<br>on<br>31.01.2020.  As per NC decision taken in<br>Meeting No. 22 dated 19.2.2020, D/L was<br>sent on 01.04.2020. Applicant‟s reply dt.<br>01.06.2020 was sent to Consultant (TEC-3)<br>on 01.06.2020. However, no comments have<br>been receivedyet.|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as<br>per agenda.  On the<br>advice of Consultant<br>(TEC-3), the Committee<br>decided to call from the<br>applicant the following<br>information :<br>1.<br>Justification<br>for<br>wastage of 31.3% on<br>input<br>for<br>slitting<br>supported by evidence<br>2.Price of disposal of<br>scrap in last 3 years<br>with<br>supporting<br>document<br>3. Document for cif<br>price of inputs|Deferred|
|R23||||||
|||||||
||U.K.B.<br>ELECTRONICS<br>PVT. LTD.<br>0510400120<br>dated<br>18.10.2016|<br>01/81/050/004<br>75/AM17/<br>05/24/040/003<br>22/AM17/|The case was rejected in M. No. 9/81 dated<br>25.07.2017 due to non-submission of reply of<br>deficiency letter dated 06.04.2017. The<br>applicant requested to fix the norms. The<br>applicant‟s reply dated 15.04.2019 was<br>forwarded to DPIIT on 03.07.2019 followed<br>by reminder on 27.09.2019. DPIIT vide U. O.<br>No.<br>P-47011/195/2019-TS|W<br>dated<br>30.07.2019 advised to seek comments from<br>MeitY as export/import items are pertaining<br>to data communication cables. As per NC<br>decision of M. No. 16/81 dt. 13.11.2019, the<br>case was referred to MeitY on 23.12.2019.<br>The case was last considered in M. No. 19/81<br>dt. 26.12.2019 and decided to wait for<br>comments. However, no comments have<br>been receivedyet.  As requested bythe|<br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>MeitY<br>to<br>expedite the comments.|<br> <br>Deferred|
|R24||||||
|||||||

75 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

representative of MeitY in M. No. 22 dated<br>19.2.2020, copy of application was again sent<br>to MeitY vide email dated 3.6.2020. <br>
APAR<br>INDUSTRIES<br>LIMITED<br>0310822970<br>dated<br>10.08.2018 01/81/050/002<br>22/AM19/<br>03/94/040/002<br>18/AM19/ The case was ratified in M. No. 3/81 dated<br>15.05.2019 as per written comments of<br>DPIIT vide F. No.: P-47011/392/2018-TSW<br>dated 09.04.2019. The applicant vide letter<br>dated<br>13.06.2019<br>requested<br>to<br>keep<br>description exactly as per AA i.e. Aluminium<br>Plates/Coils instead of only Aluminium<br>Plates for best utilization of AA. The<br>representation was referred to DPIIT on<br>23.08.2019. The case was considered in M.<br>No. 13/81dated 04.10.2019 and decided to<br>call the applicant on personal hearing to<br>explain the case regarding import of value<br>added products like Aluminium Plate/Coil<br>for manufacturing of Aluminium Conductor.<br>As per NC decision, an email was sent to the<br>applicant on 01.11.2019 to attend PH on<br>13.11.2019. As decided in M. No. 16/81<br>dt.13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. Consultant (TEC-3) on 18.03.2020<br>stated that proposal was earlier processed by<br>DPIIT <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium Coil of size<br>8.0<br>mm<br>thickness<br>to<br>manufacture<br>Insulated<br>wire/cables etc.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>3/81 dated 15.05.2019. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R25

76 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

The<br>request<br>of<br>the<br>applicant is rejected.
APAR<br>INDUSTRIES<br>LIMITED<br>0310822820<br>dated<br>02.08.2018 01/81/050/005<br>49/AM19/<br>03/94/040/002<br>73/AM19 This case was ratified in M. No. 10/81 dated<br>16.01.2019 as per written comments of<br>written comments of Consultant (TEC-3).<br>The applicant vide letter dated 13.06.2019<br>had requested to keep the description exactly<br>same as per AA. The case was considered in<br>M. No. 13/81dated 04.10.2019 and decided<br>to call the applicant for personal hearing to<br>explain the case regarding import of value<br>added products like Aluminium Plate/Coil<br>for manufacturing of Aluminium Conductor.<br>As per NC decision, an email was sent to the<br>applicant on 01.11.2019 to attend PH on<br>13.11.2019. As decided in M. No. 16/81 dt.<br>13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium Coil of size<br>8.0<br>mm<br>thickness<br>to<br>manufacture Aluminium<br>Conductor, wire Rod etc.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>10/81 dated 16.01.2019. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R26

77 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

The<br>request<br>of<br>the<br>applicant is rejected.
APAR<br>INDUSTRIES<br>LIMITED<br>3410044571<br>dated<br>10.10.2018 01/81/050/006<br>12/AM19/<br>34/24/040/002<br>21/AM19/ The case was ratified in M. No. 4/81 dated<br>29.05.2019 as per written comments of<br>Consultant (TEC-3). The applicant vide letter<br>dated 03.07.2019 had requested for revision<br>of ratified norms. As per NC decision of M.<br>No. 15/81 dt. 30.10.2019, an email dated<br>01.11.2019 was sent to the applicant to attend<br>PH on 13.11.2019. As decided in M. No.<br>16/81 dt. 13.11.2019, the applicant was again<br>called for personal hearing on 26.12.2019 to<br>explain the matter. The case was last<br>considered in M. No. 19/81 dt. 26.12.2019<br>and<br>the<br>Committee<br>directed<br>to<br>the<br>representative<br>to<br>furnish<br>following<br>information for further examination of the<br>case: 1. Bill of entry. 2. A write-up stating<br>that the imported material should be used as<br>raw material for exported product only. As<br>per NC decision, D/L was sent to the<br>applicant on 27.01.2020. The applicant‟s<br>reply<br>dated<br>29.01.2020<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>informed that its import<br>product Aluminium Coil<br>is pending for import.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,.<br>There is no justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>4/81-ALC2/2019<br>dated<br>29.05.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R27

78 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

APAR<br>INDUSTRIES<br>LIMITED<br>3410044555<br>dated<br>08.10.2018 01/81/050/006<br>16/AM19/<br>34/24/040/002<br>09/AM19/ The case was ratified in M. No. 4/81-<br>ALC2/2019 dated 29.05.2019 as per written<br>comments given by Consultant (TEC-3). The<br>applicant vide letter dated 03.07.2019 had<br>requested for revision of ratified Norms. As<br>per NC decision of M. No. 15/81 dt.<br>30.10.2019, an email dated 01.11.2019 was<br>sent to the applicant to attend PH on<br>13.11.2019. As decided in M. No. 16/81 dt.<br>13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>informed that its import<br>product Aluminium Coil<br>is pending for import.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>4/81-ALC2/2019<br>dated<br>29.05.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R28
APAR<br>INDUSTRIES<br>LIMITED 01/81/050/006<br>13/AM19/<br>34/24/040/001 The case was ratified in M. No. 4/81-<br>ALC2/2019 dated 29.05.2019 as per written<br>commentsgiven byConsultant(TEC-3). The <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant <br> <br> <br>Rejected
R29

79 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

3410044570<br>dated<br>10.10.2018 91/AM19/ applicant vide letter dated 03.07.2019 had<br>request for revision of ratified norms. As per<br>NC decision of M. No. 15/81 dt. 30.10.2019,<br>an email dated 01.11.2019 was sent to the<br>applicant to attend PH on 13.11.2019. As<br>decided in M. No. 16/81 dt. 13.11.2019, the<br>applicant was again called for personal<br>hearing on 26.12.2019 to explain the matter.<br>The case was last considered in M. No. 19/81<br>dt. 26.12.2019 and the Committee directed to<br>the representative to furnish following<br>information for further examination of the<br>case: 1. Bill of entry. 2. A write-up stating<br>that the imported material should be used as<br>raw material for exported product only. As<br>per NC decision, D/L was sent to the<br>applicant on 27.01.2020. The applicant‟s<br>reply<br>dated<br>29.01.2020<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>informed that import of<br>Aluminium<br>Coil<br>is<br>pending for import.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium wire. There is<br>no justification to import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>4/81-ALC2/2019<br>dated<br>29.05.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
APAR<br>INDUSTRIES<br>LIMITED<br>3410044796<br>dated<br>07.01.2019 01/81/050/009<br>51/AM19/<br>34/24/040/003<br>06/AM19/ The case was ratified in M. No. 9/81-<br>ALC2/2019 dated 07.08.2019 as per written<br>comments of Consultant (TEC-3). The<br>applicant vide letter dated 09.10.2019 had<br>requested for revision of ratified norms. As<br>per NC decision of M. No. 15/81 dt.<br>30.10.2019,an email dated 01.11.2019 was <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>furnished a copyof bill of <br> <br> <br> <br> <br> <br> <br>Rejected
R30

80 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

sent to the applicant to attend PH on<br>13.11.2019. As decided in M. No. 16/81 dt.<br>13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium<br>Coil<br>of<br>various sizes of 7.0 mm<br>thickness to 20.0 mm<br>thickness to manufacture<br>Aluminium Conductors.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium Conductors.<br>There is no justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in 9/81-<br>ALC2/2019<br>dated<br>07.08.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
APAR<br>INDUSTRIES<br>LIMITED<br>3410043984 01/81/050/009<br>67/AM19/<br>34/24/040/003<br>36/AM18/ The case was ratified in M. No. 07/81-<br>ALC2/2019 dated 10.07.2019 as per written<br>comments<br>dated<br>05.07.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide letter<br>dated 09.10.2019 had requested for revision <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter <br> <br> <br> <br> <br>Rejected
R31

81 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

dated<br>21.03.2018 of ratified norms. As per NC decision M. No.<br>15/81 dt. 30.10.2019, an email dated<br>01.11.2019 was sent to the applicant to attend<br>PH on 13.11.2019. As decided in M. No.<br>16/81 dt. 13.11.2019, the applicant was again<br>called for personal hearing on 26.12.2019 to<br>explain the matter. The case was last<br>considered in M. No. 19/81 dt. 26.12.2019<br>and<br>the<br>Committee<br>directed<br>to<br>the<br>representative<br>to<br>furnish<br>following<br>information for further examination of the<br>case: 1. Bill of entry. 2. A write-up stating<br>that the imported material should be used as<br>raw material for exported product only. As<br>per NC decision, D/L was sent to the<br>applicant on 27.01.2020. The applicant‟s<br>reply<br>dated<br>29.01.2020<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>dated<br>09.01.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium sheet/coil of<br>thickness 1.27 mm to 8.0<br>mm<br>to<br>manufacture<br>Aluminium<br>Conductors<br>etc.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>07/81-ALC2/2019 dated<br>10.07.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
APAR<br>INDUSTRIES<br>LIMITED 01/81/050/008<br>37/AM19/ The case was ratified in M. No. 9/81-<br>ALC2/2019 dated 07.08.2019 as per written<br>comments of Consultant(TEC-3). The <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant <br> <br> <br>Rejected
R32

82 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

3410044066<br>dated<br>19.04.2018 34/24/040/003<br>82/AM18/ applicant vide letter dated 09.10.2019 has<br>requested for revision of ratified norms. As<br>per NC decision of M. No. 15/81 dt.<br>30.10.2019, an email dated 01.11.2019 was<br>sent to the applicant to attend PH on<br>13.11.2019. As decided in M. No. 16/81 dt.<br>13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>09.01.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium sheet/coil of<br>thickness 7.0 mm to 20<br>mm<br>to<br>manufacture<br>Aluminium<br>alloy<br>wire/rod etc.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>9/81-ALC2/2019<br>dated<br>07.08.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
R33 APAR 01/81/050/008 The case was ratified in M. No. 7/81- The<br>Committee Rejected

83 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

INDUSTRIES<br>LIMITED<br>3410044281<br>dated<br>26.06.2018 30/AM19/<br>34/24/040/000<br>63/AM19/ ALC2/2019 dated 10.07.2019 as per written<br>comments<br>dated<br>08.07.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide letter<br>dated 09.10.2019 had requested for revision<br>of ratified norms. As per NC decision of M.<br>No. 15/81 dt. 30.10.2019, an email dated<br>01.11.2019 was sent to the applicant to attend<br>PH on 13.11.2019. As decided in M. No.<br>16/81 dt. 13.11.2019, the applicant was again<br>called for personal hearing on 26.12.2019 to<br>explain the matter. The case was last<br>considered in M. No. 19/81 dt. 26.12.2019<br>and<br>the<br>Committee<br>directed<br>to<br>the<br>representative<br>to<br>furnish<br>following<br>information for further examination of the<br>case: 1. Bill of entry. 2. A write-up stating<br>that the imported material should be used as<br>raw material for exported product only. As<br>per NC decision, D/L was sent to the<br>applicant on 27.01.2020. The applicant‟s<br>reply<br>dated<br>29.01.2020<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>9.1.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium<br>Coil<br>of<br>various sizes of 3.5mm<br>thickness to 20.0 mm<br>thickness to manufacture<br>Aluminium wire.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium wire. There is<br>no justification to import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in 7/81-<br>ALC2/2019<br>dated<br>10.07.2019.<br>The<br>request<br>of<br>the<br>applicant is rejected. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>

84 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

APAR<br>INDUSTRIES<br>LIMITED<br>3410044027<br>dated<br>09.04.2018 01/81/050/008<br>36/AM19/<br>34/24/040/003<br>99/AM18/ The case was ratified in M. No. 07/81-<br>ALC2/2019 dated 10.07.2019 as per written<br>comments<br>dated<br>05.07.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide letter<br>dated 09.10.2019 had requested for revision<br>of ratified norms. An email dated 01.11.2019<br>sent to the applicant to attend PH on<br>13.11.2019. As decided in M. No. 16/81 dt.<br>13.11.2019, the applicant was again called<br>for personal hearing on 26.12.2019 to explain<br>the matter. The case was last considered in<br>M. No. 19/81 dt. 26.12.2019 and the<br>Committee directed to the representative to<br>furnish following information for further<br>examination of the case: 1. Bill of entry. 2. A<br>write-up stating that the imported material<br>should be used as raw material for exported<br>product only. As per NC decision, D/L was<br>sent to the applicant on 27.01.2020. The<br>applicant‟s reply dated 29.01.2020 forwarded<br>to Consultant (TEC-3) on 05.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda. Consultant<br>(TEC-3) informed that<br>the applicant vide letter<br>dated<br>09.01.2020<br>has<br>furnished a copy of bill of<br>entry and it is noticed that<br>it<br>has<br>imported<br>Aluminium sheet/coil of<br>size 7.0mm & 8.0mm<br>thickness to manufacture<br>Aluminium alloy wire /<br>rod etc.<br>The<br>Committee<br>deliberated the issue and<br>noted that Inputs should<br>be allowed on the basis of<br>essentiality and not on the<br>basis<br>of<br>cheaper<br>availability. Plates/sheets/<br>coils are value added<br>products which are not<br>the primary raw material<br>and hence not essential to<br>manufacture<br>the<br>Aluminium<br>Conductor,<br>wire Rod etc. There is no<br>justification<br>to<br>import<br>„Plate/Sheet/Coil‟ which<br>are value added products,<br>and melting the same<br>again into primary form.<br>The<br>Committee<br>also<br>noted that in a similar<br>case<br>of<br>JINDAL<br>ALUMINIUM<br>LTD.<br>mentioned at S.No. 74,<br>the applicant has itself<br>corrected the description<br>of item of import from<br>strips to ingot.<br>Hence, the Committee<br>decided to maintain status<br>quo and not to change the<br>decision taken in M. No.<br>07/81-ALC2/2019 dated<br>10.07.2019. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R34

85 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

The<br>request<br>of<br>the<br>applicant is rejected. The<br>request<br>of<br>the<br>applicant is rejected.
DISHA AUTO<br>COMPONENTS<br>PVT. LTD.<br>0310824393<br>dated<br>11.10.2018 The Committee heard the<br>representative<br>of<br>the <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
The case was ratified in M. No. 21 dt.<br>09.01.2018 as per written comments dated<br>28.10.2019 given by Consultant (TEC-3).<br>The applicant vide letter dated 02.12.2019<br> <br> <br> <br> <br> <br>applicant during personal<br>hearing<br>held<br>through<br>video conferencing. The<br>representative stated that<br>the<br>Committee<br>has<br>allowed lower wastages<br>
had requested for revision of ratified norms.<br>The case was referred to Consultant (TEC-3) <br> <br>to it because it calculated<br>the wastae on „inu
<br>OMPONENTS<br>PVT. LTD.<br>0310824393<br>dated<br>11.10.2018 <br>PONENTS<br>T. LTD. <br>01/81/050/008<br>91/AM19/ <br>on 23.12.2019. The case wa<br>in M. No. 12/81 dt. 19.2.2<br>(TEC-3) informed that the w <br>s last considered<br>020. Consultant<br>astage has been <br> <br> <br> <br>g<br>quantity<br>export prod<br>the<br>Com p<br>utilised for<br>uct‟ whereas<br>mittee<br>has
R35
10824393<br>dated 03/94/040/006<br>15/AM19/ <br>allowed in weight terms but<br>requested to allow wastage in <br>the applicant has<br>length which is <br> <br> <br>considered<br>quantity it on „output<br>exported‟
.10.2018 not possible as major wastage occur on<br>thickness of pipe. Therefore, the Committee<br>decided to call the applicant for personal<br>hearing to explain the case before Norms<br>Committee in the forthcoming NC meeting as<br>per advice of Consultant (TEC-3). <br> <br> <br> <br> <br>basis. Further,<br>the<br>Committee<br>has<br>taken<br>recovery from wastages<br>as 20% whereas it should<br>be between 7-8%.<br>The<br>Committee<br>asked<br>Consultant (TEC-3) to<br>
examine the issue and<br>fih hi
urns s c omments.
DISHA AUTO<br>COMPONENTS<br>PVT.<br>LTD.<br>0310827926<br>dated<br>27.03.2019 Th<br>A<br> e case was ratified in M.<br>LC2/2019 dated 13.11.2019 as<br>t<br>dtd<br>08112019 No. 16/81-<br>per written<br>i<br>b <br> <br>The Commi<br>representativ<br>lit d ttee heard the<br>e<br>of<br>the<br>i <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
co<br>Co<br>Th mmens<br>ae<br>..<br>nsultant<br>e applicant vide letter dated gven<br>y<br>(TEC-3).<br>26.12.2019 <br> <br> <br>appcan<br>hearing<br>h<br>video confe rng persona<br>eld<br>through<br>rencing. The
A AUTO<br>PONENTS<br> <br> <br> <br> <br>01/81/050/011 <br>requested for revision of ratified norms as<br>under:- (i) to allow import quantities in Unit<br>of Measurement as Meter and (ii) to allow<br>rejection/wastage of 9% on raw materials or<br>9.89% on finished product. The case was<br>considered in M. No. 20/81 dt. 08.01.2020 <br> <br> <br> <br> <br> <br> <br> <br>representative stated that<br>the<br>Committee<br>has<br>allowed lower wastages<br>to it because it calculated<br>the wastage on „input<br>quantity<br>utilised for
<br>82/AM19/ and decided to refer the case to Consultant<br> <br> <br>export product‟ whereas<br> <br> <br>
R36 827926<br> 03/94/040/01<br>28/AM19/ 1 (TEC-3) for examination & co<br>representation was forwarded to<br>(TEC-3) on 30.01.2020 for exa<br>h Th l mments. The<br>Consultant<br>mination of<br>dd i M <br> <br> <br> <br>the<br>Com<br>considered<br>quantity<br>bi Fh mittee<br>has<br>it on „output<br>exported‟<br> <br>h
.2019 te case. e case was ast cons<br>No. 23/81 dt. 04.03.2020. The<br>considered the case as per ere n .<br>Committee<br>agenda and <br> <br> <br>ass. urt<br>Committee<br>recovery fr r,<br>te<br>has<br>taken<br>om wastages
<br>Consultant (Tec-3) informed that wastage has<br>been allowed as requested with 20% recovery<br>in weight. The applicant has requested<br>wastage in length which is not possible as<br>major wastage occur on thickness of pipe. <br> <br> <br> <br> <br> <br> <br>as 20% whereas it should<br>be between 7-8%.<br>The<br>Committee<br>asked<br>Consultant (TEC-3) to
<br>Therefore, the Committee decided to call the<br>applicant forpersonal hearingto explain the <br> <br> <br>examine the issue and<br>furnish his comments.

86 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

case before Norms Committee.
DISHA AUTO<br>COMPONENTS<br>PVT.<br>LTD.<br>0310823797<br>dated<br>17.09.2018 <br> <br> <br>01/81/050/006<br>44/AM19/<br>03/94/040/005<br>28/AM19/ The case was ratified in M. No. 17/81-<br>ALC2/2019 dated 27.11.2019 as per written<br>comments<br>dated<br>21.11.2019<br>given<br>by<br>Consultant (TEC-3) considering applicant‟s<br>reply dated 30.06.2019 & 24.07.2019.<br>The applicant vide representation dated<br>26.12.2019 requested to revise the ratified<br>norms. The case was considered in M. No.<br>21/81dated 22.01.2020 and decided to refer<br>the<br>case<br>to<br>Consultant<br>(TEC-3)<br>for<br>examination & comments. The representation<br>was forwarded to Consultant (TEC-3) on<br>27.01.2020. The case was last considered in<br>M. No. 24/81 dt. 18.03.2020. The Committee<br>considered the case as per agenda and<br>Consultant (Tec-3) informed that wastage has<br>been allowed as requested with 20% recovery<br>in weight. The applicant has requested<br>wastage in length which is not possible as<br>major wastage occur on thickness of pipe.<br>Therefore, the Committee decided to call the<br>applicant for personal hearing to explain the<br>case before Norms Committee. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee heard the<br>representative<br>of<br>the<br>applicant during personal<br>hearing<br>held<br>through<br>video conferencing. The<br>representative stated that<br>the<br>Committee<br>has<br>allowed lower wastages<br>to it because it calculated<br>the wastage on „input<br>quantity<br>utilised for<br>export product‟ whereas<br>the<br>Committee<br>has<br>considered it on „output<br>quantity<br>exported‟<br>basis. Further,<br>the<br>Committee<br>has<br>taken<br>recovery from wastages<br>as 20% whereas it should<br>be between 7-8%.<br>The<br>Committee<br>asked<br>Consultant (TEC-3) to<br>examine the issue and<br>furnish his comments. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R37
DISHA AUTO<br>COMPONENTS<br>PVT.LTD.<br>0310823617<br>Dated<br>07.09.2018 <br> <br>01/81/050/006<br>43/AM19/<br>03/94/040/005<br>10/AM19/ The case was ratified in M. No. 17/81-<br>ALC2/2019 dated 27.11.2019 as per written<br>comments<br>dated<br>21.11.2019<br>given<br>by<br>Consultant (TEC-3) considering applicant‟s<br>reply<br>dated<br>30.06.2019.<br>The applicant vide letter dated 26.12.2019<br>stated that they had been granted for lower<br>quantities of imports as compared to actual<br>utilized inputs for export product. They had<br>also requested for personal hearing before the<br>Norms Committee. The case was last<br>considered in M. No. 24/81 dt. 18.03.2020.<br>The Committee considered the case as per<br>agenda and Consultant (Tec-3) informed that<br>wastage has been allowed as requested with<br>20% recovery in weight. The applicant has<br>requested wastage in length which is not<br>possible as major wastage occur on thickness<br>of pipe. Therefore, the Committee decided to<br>call the applicant for personal hearing to<br>explain the case before Norms Committee. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee heard the<br>representative<br>of<br>the<br>applicant during personal<br>hearing<br>held<br>through<br>video conferencing. The<br>representative stated that<br>the<br>Committee<br>has<br>allowed lower wastages<br>to it because it calculated<br>the wastage on „input<br>quantity<br>utilised for<br>export product‟ whereas<br>the<br>Committee<br>has<br>considered it on „output<br>quantity<br>exported‟<br>basis. Further,<br>the<br>Committee<br>has<br>taken<br>recovery from wastages<br>as 20% whereas it should<br>be between 7-8%.<br>The<br>Committee<br>asked<br>Consultant (TEC-3) to<br>examine the issue and<br>furnish his comments. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R38
R39 JAIN<br>FGL 01/81/050/001 The case was ratified in MeetingNo. 20/81- The<br>Committee Approved

87 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

METAL<br>INDUSTRIES<br>0410165804<br>05.07.2019 METAL<br>INDUSTRIES<br>0410165804<br>05.07.2019 57/AM20/<br>04/24/040/000<br>26/AM20/ 57/AM20/<br>04/24/040/000<br>26/AM20/ ALC2/2019 dated 08.01.2020 on repeat basis<br>allowing 3% wastage for making export<br>product „Copper scrap covered by ISRI code<br>words Barely, Berry and Brich‟ from import<br>item „Copper wire scrap as per ISRI code<br>Druid‟ after effecting 40% recovery.<br>The applicant vide email dated 26.3.2020<br>filed the review petition stating that export of<br>copper scrap to china has been stopped as it<br>has imposed restriction due to Corona virus<br>outbreak. Due to CAVID-19, other countries<br>are also not accepting copper in the form of<br>scrap. However some customers from china<br>ordered for copper in the form Billets<br>(Refined Copper Billets – Avg. Cu content -<br>99%). It has already made export of 416 MTs<br>out of 2280 MTs of export item and cannot<br>export more quantity of this item. The<br>applicant has requested to proportionately<br>decrease the above said export item and<br>allow „Refined copper Billets Cu. 99%<br>(1864000 Kg.) as additional export item as<br>both can be made from the same imported<br>input. The applicant vide letter dated<br>28.05.2020 has also forwarded a copy of<br>application,<br>filed<br>online,<br>for<br>partial<br>modification in export item.<br>The matter has been referred to MSME for<br>examination vide email dated 27.6.2020. ALC2/2019 dated 08.01.2020 on repeat basis<br>allowing 3% wastage for making export<br>product „Copper scrap covered by ISRI code<br>words Barely, Berry and Brich‟ from import<br>item „Copper wire scrap as per ISRI code<br>Druid‟ after effecting 40% recovery.<br>The applicant vide email dated 26.3.2020<br>filed the review petition stating that export of<br>copper scrap to china has been stopped as it<br>has imposed restriction due to Corona virus<br>outbreak. Due to CAVID-19, other countries<br>are also not accepting copper in the form of<br>scrap. However some customers from china<br>ordered for copper in the form Billets<br>(Refined Copper Billets – Avg. Cu content -<br>99%). It has already made export of 416 MTs<br>out of 2280 MTs of export item and cannot<br>export more quantity of this item. The<br>applicant has requested to proportionately<br>decrease the above said export item and<br>allow „Refined copper Billets Cu. 99%<br>(1864000 Kg.) as additional export item as<br>both can be made from the same imported<br>input. The applicant vide letter dated<br>28.05.2020 has also forwarded a copy of<br>application,<br>filed<br>online,<br>for<br>partial<br>modification in export item.<br>The matter has been referred to MSME for<br>examination vide email dated 27.6.2020. ALC2/2019 dated 08.01.2020 on repeat basis<br>allowing 3% wastage for making export<br>product „Copper scrap covered by ISRI code<br>words Barely, Berry and Brich‟ from import<br>item „Copper wire scrap as per ISRI code<br>Druid‟ after effecting 40% recovery.<br>The applicant vide email dated 26.3.2020<br>filed the review petition stating that export of<br>copper scrap to china has been stopped as it<br>has imposed restriction due to Corona virus<br>outbreak. Due to CAVID-19, other countries<br>are also not accepting copper in the form of<br>scrap. However some customers from china<br>ordered for copper in the form Billets<br>(Refined Copper Billets – Avg. Cu content -<br>99%). It has already made export of 416 MTs<br>out of 2280 MTs of export item and cannot<br>export more quantity of this item. The<br>applicant has requested to proportionately<br>decrease the above said export item and<br>allow „Refined copper Billets Cu. 99%<br>(1864000 Kg.) as additional export item as<br>both can be made from the same imported<br>input. The applicant vide letter dated<br>28.05.2020 has also forwarded a copy of<br>application,<br>filed<br>online,<br>for<br>partial<br>modification in export item.<br>The matter has been referred to MSME for<br>examination vide email dated 27.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>considered the case as per<br>agenda. Based on the<br>written comment given<br>by MSME vide email<br>dated<br>8.7.2020,<br>the<br>Committee decided to fix<br>the<br>ad-hoc<br>norms<br>as<br>under: <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>considered the case as per<br>agenda. Based on the<br>written comment given<br>by MSME vide email<br>dated<br>8.7.2020,<br>the<br>Committee decided to fix<br>the<br>ad-hoc<br>norms<br>as<br>under: <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>considered the case as per<br>agenda. Based on the<br>written comment given<br>by MSME vide email<br>dated<br>8.7.2020,<br>the<br>Committee decided to fix<br>the<br>ad-hoc<br>norms<br>as<br>under: <br> <br> <br> <br> <br> <br>
Recommended<br>Quantity<br>5806559 kgs<br>(1061324 Kgs<br>inclusive of 3%<br>wastage against<br>export item No.<br>1 and 4745235<br>Kgs inclusive of<br>2% wastage<br>against export<br>item No. 2)
Sl.<br>No. ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import<br>Item Recommended<br>Quantity
1 74040012 Copper scrap covered by ISRI<br>code words Barely, Berry and<br>Brich, Copper wire nodules<br>scrap covered by ISRI code<br>words<br>Clove,<br>cobra<br>and<br>Cocoa<br>–Copper<br>Content<br>99% <br>416328 Kgs 74040012 Copper<br>wire scrap<br>as per<br>ISRI code<br>Druid<br>Min Cu –<br>40% 5806559 kgs<br>(1061324 Kgs<br>inclusive of 3%<br>wastage against<br>export item No.<br>1 and 4745235<br>Kgs inclusive of<br>2% wastage<br>against export<br>item No. 2)
2 74031300 Refined Copper Billets Cu.<br>Content 99.85%.To account<br>for1860876.50Kgs of copper<br>within the Export Product 1863672<br>Kgs.
Note :
1. Quantity for Export product at S. No. 1 may be amended as 416328 Kgs.<br>2. Export product at S. No. 2 above may be added to the authorization with quantity as 1863672 Kgs.<br>3. Average percentage of Copper (Cu) in export item No. 1 and 2 to be mentioned as 99 and 99.85% respectively.<br>4. Average percentage of Copper (Cu) by weight in import item to be mentioned as 40%.
RA concerned maytake suitable consequential action accordingly.

88 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

KUMAR<br>INDUSTRIES<br>0510408978<br>dated<br>18.12.2018 01/81/050/007<br>03/AM19/<br>05/23/040/004<br>10/AM19/ The case was ratified in M. No. 12/81 dated<br>13.02.2019 on the recommendation of<br>Consultant (TEC-3). The applicant vide letter<br>dated 18.05.2019 had requested for revision<br>of<br>ratified<br>norms.<br>The<br>applicant‟s<br>representation was referred to Consultant<br>(TEC-3) on 28.01.2020 for examination of<br>the case as decided in M. No. 19/81 dt.<br>26.12.2019. The study group report has been<br>adopted in M. No. 24 dated 18.3.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>agenda and decided to fix<br>the ad-hoc norms on the<br>basis of study group<br>report as adopted in M.<br>No.<br>24/81<br>dated<br>18.3.2020vvas under:<br>1. The<br>quantity<br>of<br>import item may be<br>allowed<br>as<br>1.10<br>Kgs/Kg content in<br>the export product.<br>Note:<br>1. Grade of steel to<br>match<br>in<br>import<br>&<br>export.<br>2.<br>Thickness<br>of<br>sheet/circle should be<br>between 0.1 mm to 1<br>mm.<br>3.<br>Export<br>product<br>should<br>be<br>of<br>circular/oval shape only.<br>RA concerned may take<br>suitable<br>consequential<br>action accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R40
RAYCHEM<br>RPG PVT LTD.<br>0310815877<br>dated<br>21.09.2017 <br>01/81/050/003<br>68/AM18/<br>03/95/040/004<br>79/AM18/ The case was ratified in M. No. 12/81 dated<br>13.02.2019 on repeat basis as approved for<br>AA No. 03105917496 dated 9.09.2010. The<br>applicant vide letter dated 11.12.2019 had<br>requested for revision of ratified norms. The<br>case was last considered in M. No. 19/81 dt.<br>26.12.2019 and decided to refer the case to<br>DPIIT for examination & comments. As per<br>NC decision, the case was referred to DPIIT<br>on 26.12.2019. However, no comments have<br>been received yet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Based on the written<br>comments give by DPIIT<br>vide<br>U.O.<br>No.<br>P-<br>47011/324/2018-TSW<br>dated<br>5.5.2020,<br>the<br>Committee<br>decided<br>to<br>seek from the applicant<br>the<br>following<br>information:<br>(i) Sl. No. 3, 4, 5 and 11<br>of SDF. <br> <br> <br> <br> <br> <br> <br>Deferred
R41
VEER-O-<br>METALS PVT.<br>LTD.<br>0710108701<br>dated<br>09.09.2015 <br>01/81/050/000<br>77/AM18/<br>07/24/040/001<br>91/AM16/ The case was ratified in M. No. 3/81-<br>ALC2/2018 dated 14.08.2018. The applicant<br>vide letter dated 10.02.2020 requested for<br>consolidated wastage percentage in the<br>ratification with the export description of<br>sheet metal components instead of detailing<br>each product. The representation was referred<br>to<br>Consultant<br>(SKB)<br>on<br>25.02.2020.<br>However, no comments have been received<br>yet. <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>fix the ad-hoc norms as<br>per<br>written<br>comments<br>given<br>by<br>Consultant<br>(SKB) (copy enclosed).<br>Concerned RA may take<br>consequential<br>action <br> <br> <br> <br> <br> <br> <br> <br>Approved
R42

89 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

accordingly.
JINDAL SAW<br>LIMITED<br>0510410575<br>dated<br>14.05.2019 01/81/050/000<br>68/AM20/<br>05/23/040/000<br>65/AM20/ The case was ratified in M. No. 14/81 dated<br>16.10.2019 as per written comments dated<br>21.08.2019 given by Consultant (TEC-3).<br>The applicant vide letter dated 10.10.2019<br>had requested for revision of ratified norms.<br>The case was referred to Consultant (TEC-3)<br>on 03.12.2019. The case was last considered<br>in M. No. 19/81 dt. 26.12.2019 and decided<br>to<br>wait<br>for<br>comments.<br>However,<br>no<br>comments have been received yet. Reminder<br>sent to Consultant (TEC-3) vide email dated<br>14.4.2020 for expediting the comments. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to seek from the applicant<br>to<br>furnish<br>following<br>information as per advice<br>of Consultant (TEC-3):<br>2. To provide detailed<br>calculations<br>of<br>stage-wise<br>percentage wastage<br>claimed in the letter<br>with<br>supporting<br>documents.<br>The case stands deferred. <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R43
STERLITE<br>POWER<br>TRANSMISSIO<br>N LIMITED<br>0310811681<br>dated<br>07.03.2017 01/81/050/000<br>74/AM18/<br>03/95/040/008<br>40/AM17/ The case was rejected in M. No. 12/81 dated<br>05.09.2017<br>due<br>to<br>non-submission<br>of<br>deficiency letter dated 12.06.2017 raised by<br>DPIIT. The applicant vide letter dated<br>02.01.2019 had requested for fixation of<br>norms. The case was last considered in M.<br>No. 19/81 dt. 26.12.2019 decided to refer the<br>case to DPIIT for examination & comments.<br>As per NC decision, the case was referred to<br>DPIIT<br>on<br>29.01.2020.<br>However,<br>no<br>comments have been received yet. Reminder<br>sent to DPIIT vide email dated 23.4.2020 for<br>expeditingthe comments. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R44
STERLITE<br>POWER<br>TRANSMISSIO<br>N<br>LIMITED<br>0310811638<br>dated<br>06.03.2017 <br>01/81/050/000<br>73/AM18/<br>03/95/040/006<br>54/AM17/ The case was rejected in M. No. 12/81 dated<br>05.09.2017<br>due<br>to<br>non-submission<br>of<br>deficiency letter dated 12.06.2017 raised by<br>DPIIT. The applicant vide letter dated<br>02.01.2019 had requested for fixation of<br>norms. The case was last considered in M.<br>No. 19/81 dt. 26.12.2019 decided to refer the<br>case to DPIIT for examination & comments.<br>As per NC decision, the case was referred to<br>DPIIT<br>on<br>29.01.2020.<br>However,<br>no<br>comments have been received yet. The case<br>was last considered in M. No. 22/81 dt.<br>19.02.2020<br>and<br>decided<br>to<br>wait<br>for<br>comments. Reminder issued to DPIIT on<br>29.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R45
STERLITE<br>POWER<br>TRANSMISSIO<br>N<br>LIMITED<br>0310818561<br>dated<br>17.01.2018 <br>01/81/050/001<br>77/AM19/<br>03/95/040/002<br>27/AM18/ The case was ratified in M. No. 14/81dated<br>16.10.2019 on the recommendation of<br>representative of DIPP taking cue from SION<br>C-1394. The applicant vide letter dated<br>02.01.2019 had requested for revision of<br>norms. The case was last considered in M.<br>No. 19/81 dt. 26.12.2019 and decided to refer<br>the case to DPIIT for examination & <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R46

90 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

comments. As per NC decision, the case was<br>referred to DPIIT on 13.02.2020. However,<br>no comments have been received yet. The<br>case was last considered in M. No. 22/81 dt.<br>19.02.2020<br>and<br>decided<br>to<br>wait<br>for<br>comments. Reminder issued to DPIIT on<br>29.6.2020. <br> <br> <br> <br> <br>
STERLITE<br>POWER<br>TRANSMISSIO<br>N<br>LIMITED<br>0310814496<br>dated<br>06.07.2017 <br>01/81/050/002<br>83/AM18/<br>03/95/040/000<br>26/AM18/ The case was ratified in M. No. 1/81 dated<br>15.05.2018 as per written comments of DIPP<br>vide<br>F.<br>No.<br>7/257/17-TSW/16<br>dated<br>18.04.2018. The applicant vide letter dated<br>02.01.2019 had requested for revision of<br>ratified norms. The case was last considered<br>in M. No. 19/81 dt. 26.12.2019 and decided<br>to refer the case to DPIIT for examination &<br>comments. As per NC decision, the case was<br>referred to DPIIT on 13.02.2020. However,<br>no comments have been received yet. The<br>case was last considered in M. No. 22/81 dt.<br>19.02.2020<br>and<br>decided<br>to<br>wait<br>for<br>comments. Reminder issued to DPIIT on<br>29.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R47
STERLITE<br>POWER<br>TRANSMISSIO<br>N<br>LIMITED<br>0310818549<br>dated<br>16.01.2018 <br>01/81/050/001<br>78/AM19/<br>03/95/040/006<br>57/AM18/ The case was ratified in M. No. 06/81 dated<br>01.11.2018 on the recommendation of<br>representative of DIPP. The applicant vide<br>letter dated 02.01.2019 had requested for<br>revision of ratified norms. The case was last<br>considered in M. No. 19/81 dt. 26.12.2019<br>and decided to refer the case to DPIIT for<br>examination & comments. As per NC<br>decision, the case was referred to DPIIT on<br>13.02.2020. However, no comments have<br>been received yet. The case was last<br>considered in M. No. 22/81 dt. 19.02.2020<br>and decided to wait for comments. Reminder<br>issued to DPIIT on 29.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R48
STERLITE<br>POWER<br>TRANSMISSIO<br>N<br>LIMITED<br>0310816650<br>dated<br>31.10.2017 <br>01/81/050/004<br>80/AM18/<br>03/95/040/010<br>20/AM17/ The case was ratified in M. No. 3/81dated<br>14.08.2018 as per comments of DIPP vide F.<br>No: 7/31/2018/TSW dated 18.04.2018. The<br>applicant vide letter dated 02.01.2019 had<br>requested for revision of ratified norms. The<br>case was last considered in M. No. 19/81 dt.<br>26.12.2019 and decided to refer the case to<br>DPIIT for examination & comments. As per<br>NC decision, the case was referred to DPIIT<br>on 13.02.2020. However, no comments have<br>been received yet. The case was last<br>considered in M. No. 22/81 dt. 19.02.2020<br>and decided to wait for comments. Reminder<br>issued to DPIIT on 29.6.2020. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee decided<br>to<br>remind<br>DPIIT<br>to<br>expedite the comments. <br> <br>Deferred
R49
KOTSONS<br>P.<br>LTD <br>01/81/050/003<br>26/AM16/ The case was ratified in M. No. 20/81 dated<br>12.01.2016 asper written comments of DHI <br> <br>On the request of DHI,<br>the Committee directed <br> <br>Deferred
R50

91 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

0610038228<br>dated<br>22.09.2015 0610038228<br>dated<br>22.09.2015 0610038228<br>dated<br>22.09.2015 06/24/040/000<br>24/AM16/ vide U. O. No. 3(214)/2015/TSW(B)/398<br>dated 18.12.2015. The applicant vide letter<br>dated 27.11.2019 had requested for revision<br>of ratified norms. The case was last<br> vide U. O. No. 3(214)/2015/TSW(B)/398<br>dated 18.12.2015. The applicant vide letter<br>dated 27.11.2019 had requested for revision<br>of ratified norms. The case was last<br> vide U. O. No. 3(214)/2015/TSW(B)/398<br>dated 18.12.2015. The applicant vide letter<br>dated 27.11.2019 had requested for revision<br>of ratified norms. The case was last<br> <br> <br> <br> <br> <br>the section to forward<br>complete application with<br>ANF4A<br>to<br>DHI<br>for<br>examination<br>and<br> <br> <br> <br> <br> <br>the section to forward<br>complete application with<br>ANF4A<br>to<br>DHI<br>for<br>examination<br>and<br> <br> <br> <br>
co<br>an<br>ex<br>de nsidered in M. No. 19/81 dt.<br>d decided to refer the case<br>amination & comments. A<br>cision the case was referred 26.12.2019<br>to DHI for<br>s per NC<br>to DHI on <br> <br> <br> <br>comments.
<br>13<br>th ,<br>.02.2020. In M. No. 22/81 dt.<br>e Committee decided to wait fo <br>19.02.2020,<br>r comments. <br> <br>
PARAM<br>INDUSTRIES<br>0310812841<br>dated<br>26.04.2017 AR<br> AM<br> 01/81/050/001 The case was rejected in M. No. 14/81 dated<br>03.10.2017<br>due<br>to<br>non-submission<br>of<br>deficiency letter dated 30.05.2017 raised by<br>DIPP. The applicant vide letter dated<br>27.11.2019 had requested for fixation of<br>norms. The case was last considered in M. <br> <br> <br> <br> <br> <br>Based on the written<br>comments<br>give<br>by<br>MSME vide email dated<br>8.7.2020, the Committee<br>decided to seek from the<br>applicant the following <br> <br> <br> <br> <br> <br> <br>Deferred
35/AM18/ No. 19/81 dt. 26.12.2019 decided to refer the <br>information:
R51 812841<br> <br>.2017 03/95/040/000<br>44/AM18/ ca<br>As<br>D<br> se to DPIIT for examination &<br>per NC decision, the case wa<br>PIIT on 29.01.2020. DPIIT vide<br> comments.<br>s referred to<br>U.O. dated<br> <br> <br> <br> <br>(i) Sl. No. 3,<br>of SDF. 4, 5 and 11
22<br>co<br>co .5.2020 intimated that MS<br>nsulted in the matter. As<br>mlete alication has been f E may be<br>per DPIIT<br>orwarded to <br> <br>
p pp<br>MSME on 06.07.2020.
TRAFOMEC<br>INDIA<br>MAGNETICS<br>PVT. LTD.<br>0710090674<br>dated<br>11.09.2012 Initially, the case was rejected in M. No.<br>21/81 dated 31.12.2013 as per written<br>comments<br>of<br>DHI<br>vide<br>U.<br>O.<br>No.<br>3(41)/2012/TSW(B)/294 dated 06.12.2013.<br>The case was again considered in M No <br> <br> <br> <br> <br>On the request of DHI,<br>the Committee directed<br>the section to forward<br>complete<br>set<br>of<br>application with ANF4A <br> <br> <br> <br> <br> <br>Deferred
. .<br>11/81 dated 22.08.2017 and rejected due to <br> <br> <br>to DHI for examination
AFOMEC<br>INDIA<br>GNETICS 01/81/050/002 <br>no<br>da<br>ap <br>n-submission of reply of defi<br>ted 13.04.2017 raised by DH<br>plicant vide letter dated 01.0 <br>ciency letter<br>I. Now, the<br>5.2019 had <br> <br> <br> <br>and comment s.
<br>T. LTD. 70/AM13/<br> fu<br>ad<br> rnished reply & requested for ra<br>-hoc norms. The represen<br> tification of<br>tation was<br> <br> <br>
R52
10090674<br>dated<br>.09.2012 07/24/040/002<br>16/AM13/ referred to DHI via email dated 24.12.2019.<br>The case was last considered in M. No. 19/81<br>dt. 26.12.2019 and the Committee decided to<br>defer the case with an advice to the section to<br>trace out the main file as main file was not <br> <br> <br> <br>
<br>available. Main file is traced out and referred <br>
to<br>co<br>22<br> DHI on 12.02.2020. Ho<br>mments have been received ye<br>/81 dt. 19.02.2020, the Commi<br> wever, no<br>t. In M. No.<br>ttee decided <br> <br>
to wait for comments.
DYN<br>FLO<br>PRO<br>PVT.<br>0310 AMIC<br> 01/81/050/002 Th<br> e case was ratified in Meetin<br> g No. 3/81-<br> <br>The<br> Committee<br> <br> <br> <br> <br> <br> <br>Deferred
W<br>DUCTS<br> <br>LTD.<br>814660 <br><br>96/AM18/<br>03/94/040/003<br>21/AM18/ ALC2/2018 dated 14.08.2018 with 10%<br>wastage. The applicant vide letter dated<br>30.12.2019 requested to revise the ratified<br>norms as 30% wastage instead of 10%<br>wastage. The case was referred to Consultant <br> <br> <br> <br> <br>considered the case as per<br>agenda and Consultant<br>(TEC-3)<br>asked<br>for<br>physical file to examine<br>the case. Therefore,the
R53

92 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

dated<br>18.07.2017 (TEC-3) on 31.01.2020. As decided by NC-2,<br>the case along with the reply of the applicant<br>was referred to Consultant (TEC-3) dated<br>27.02.2020<br>for<br>comments.<br>Complete<br>application was send again via email dated<br>01.07.2020. <br> <br> <br> <br> <br>Committee<br>deicide<br>to<br>send<br>physical<br>file<br>to<br>Consultant (TEC-3) for<br>examination of the case. <br> <br> <br>
JINDAL SAW<br>LIMITED<br>0510409209<br>dated<br>07.01.2019 01/81/050/009<br>48/AM19/<br>05/23/040/004<br>40/AM19/ The case was ratified in M. No. 12/81 dated<br>18.09.2019 as per written comments dated<br>16.09.2019 given by Consultant (TEC-3).<br>The applicant vide letter dated 03.01.2020<br>stated that NC allowed the quantity of<br>imported item No. 1 and 2 with 10% wastage<br>instead of 20% wastage as per SION C797.<br>Therefore, they requested to allow 20%<br>wastage in respect of import item at Sl. Nos.<br>1 & 2. The applicant‟s representation was<br>forwarded<br>to<br>Consultant<br>(TEC-3)<br>on<br>22.01.2020 for examination of the case. In<br>M. No. 22/81 dt. 19.02.2020, the Committee<br>decided to wait for comments. However, no<br>comments have been receivedyet. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>agenda and Consultant<br>(TEC-3)<br>asked<br>for<br>physical file to examine<br>the case. Therefore, the<br>Committee<br>deicide<br>to<br>send<br>physical<br>file<br>to<br>Consultant (TEC-3) for<br>examination of the case. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R54
JINDAL<br>SAW<br>LIMITED<br>0510409268<br>dated<br>09.01.2019 <br>01/81/050/009<br>55/AM19/<br>05/23/040/004<br>54/AM19/ The case was ratified in M. No. 12/81-<br>ALC2/2019 dated 18.09.2019 as per written<br>comments<br>dated<br>16.09.2019<br>given<br>by<br>Consultant (TEC-3). The applicant vide letter<br>dated 06.01.2020 requested for revision of<br>ratified norms and stated that the quantity of<br>imported item No.1 Epoxy Powder has<br>allowed 236.219 MT instead of claimed after<br>enhancement 306.219 MT while import item<br>No.8, Primer SK345 has fully disallowed by<br>the Norms Committee. The applicant‟s<br>representation was forwarded to Consultant<br>(TEC-3) on 31.01.2020 for examination of<br>the<br>case.<br>However,<br>Consultant<br>(TEC)<br>requested to refer the representation with<br>main file. In Meeting No. 22/81 dated<br>19.2.2020, the Committee directed the<br>section to send the representation with main<br>file. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee noted that<br>the<br>applicant‟s<br>representation has not yet<br>been<br>forwarded<br>to<br>Consultant (TEC-3) with<br>main file as decided in<br>Meeting<br>No.<br>22/81dated19.2.2020.<br>Therefore, the Committee<br>directed the section to<br>send the representation<br>with<br>main<br>file<br>immediately. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R55
ECIE IMPACT<br>PVT. LTD.<br>0710086493<br>dated<br>22.02.2012 01/81/050/000<br>29/AM13/<br>07/24/040/004<br>46/AM12/ The case was rejected in M. No. 14/81-<br>ALC2/2013 dated 24.09.2013 due to non-<br>submission of reply of deficiency letter raised<br>by DPIIT. The applicant vide letter dated<br>30.12.2019 requested for fixation of ad-hoc<br>norms. The applicant‟s representation was<br>forwarded<br>to<br>DPIIT<br>on<br>31.01.2020.<br>However, no comments have been received<br>yet. In M. No. 22/81 dt. 19.02.2020, the<br>Committee decided to wait for comments. <br> <br> <br> <br> <br> <br> <br>The<br>Committee<br>considered the case as per<br>agenda. Based on the<br>written comments given<br>by DPIIT vide U.O. No.<br>P-47011/87/2020-TSW<br>dated 30.6.2020 (copy<br>enclosed), the Committee<br>decided to reject the case<br>under<br>intimation<br>to<br>concerned RA. <br> <br> <br> <br> <br> <br> <br> <br> <br>Rejected
R56

93 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

RA<br>may<br>take<br>consequential<br>action<br>accordingly. <br>
MPP<br>TECHNOLOGI<br>ES<br>PRIVATE<br>LTD.<br>0710106967<br>dated<br>13.11.2014 <br>01/81/050/005<br>12/AM15/<br>07/24/040/002<br>96/AM15/ The case was ratified in M. No. 6/81-<br>ALC2/2015 dated 30.06.2015 as per written<br>comments<br>of<br>DHI<br>vide<br>U.<br>O.<br>No.<br>3(174)/2014/TSW(B) dated 13.07.2015. The<br>applicant<br>vide<br>letter<br>dated<br>28.08.2016<br>requested for ratification on repeat basis AA.<br>No. 0710093908 dt. 22.02.2013, 0710096368<br>dt. 02.07.2013, 0710103837 dt. 01.05.2014 &<br>0710098133 dt. 06.09.2013. The case was<br>last considered in M. No. 22/81 dt.<br>19.02.2020, the Committee noted that the<br>request has been received beyond 90 days<br>from last decision. Hence, the Committee<br>decided to ask the applicant to deposit a<br>composition fee of Rs.5000/- for considering<br>revision of the case. As per NC decision,<br>Composition fee mail has been sent to<br>applicant via email dt. 01.04.2020. The<br>applicant vide email dated 2.4.2020 informed<br>that it has not represented for the said AA. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>As<br>per<br>email<br>dated<br>2.4.2020 of the applicant,<br>the Committee decided to<br>allow withdrawal of the<br>case from the agenda. <br> <br> <br> <br>Withdraw<br>n
R57
PALOMA<br>TURNING<br>COMPANY<br>PRIVATE<br>LIMITED,<br>BANGALORE,<br>A 100% EOU 01/81/171/000<br>22/AM20/DES<br>2/<br>CSEZ<br>Bangalore<br>F.No.1/19/200<br>6-EOU:CSEZ Paloma Turning Company Private Limited,<br>Bangalore, a 100% EOU, vide letter dated<br>02.08.2016 stated that they are manufacturer<br>and 100% exporters of customized machined<br>components made out of bar stocks/Cut<br>blanks/Forgings, Tubes of various metals<br>made on CAM operated automatics, CNC<br>Machines as per customer specification and<br>drawings. The finished export product is<br>manufactured out of this raw material the<br>remnant is the scrap generated since the<br>process involves machining of metals out of<br>bar<br>stocks/Cut<br>blanks/Forgings,<br>Tubes.<br>Therefore, the applicant had requested to fix<br>the scrap norms. O/o MSME Development<br>Institute,<br>Bangalore<br>vide<br>letter<br>dated<br>02.05.2011 had enclosed a copy of the<br>percentage<br>of<br>scrap<br>generated<br>from<br>Aluminium, Steel, Stainless Steel works out<br>from 16 to 80% as Annexure „A‟. In<br>Meeting No. 22/81 dated 19.2.2020, the<br>Committee directed the section to trace out<br>the main file. . The action isyetpending. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>The Committee directed<br>the section to trace out<br>the main file on priority.<br>In the mean time, the<br>Committee also decided<br>to ask the CSEZ as well<br>as the applicant to submit<br>complete<br>set<br>of<br>documents in the present<br>case. <br> <br> <br> <br> <br> <br> <br> <br> <br>Deferred
R58
PRANITA<br>ENGINEERING<br>SOLUTIONS<br>PRIVATE<br>LIMITED <br>01/81/050/000<br>26/AM10/<br>07/24/040/000<br>39/AM10/ The case was withdrawn in M. No. 44/81-<br>ALC2/2009 dated 02.02.2010 on the ground<br>that the case was rejected in M. No. 38/81<br>dated<br>22.12.2009<br>(actually<br>held<br>on<br>29.12.2009) due to non submission of reply<br>of the deficiencyletter raised byDIPP. The <br> <br> <br> <br> <br>The Committee decided<br>to wait for reply of the<br>applicant. <br> <br>Deferred
R59

94 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

0710064492<br>dated<br>04.05.2009 applicant<br>vide<br>letter<br>dated<br>11.11.2019<br>furnished reply with a request to fix the ad-<br>hoc norms and also asked for personal<br>hearing. The applicant‟s representation was<br>forwarded<br>to<br>DPIIT<br>on<br>31.01.2020.<br>However, no comments have been received<br>yet. In M. No. 22/81 dt. 19.02.2020, the<br>Committee decided to wait for comments.<br>Comments of DPIIT D/L received vide email<br>dated 23.04.2020. DPIIT D/L has been sent<br>to applicant on 07.07.2020. <br> <br> <br> <br> <br> <br> <br> <br>
ESWARI<br>GLOBAL<br>METAL<br>INDUSTRIES<br>PRIVATE<br>LIMITED<br>0710111004<br>dated<br>19.01.2017 01/81/050/002<br>97/AM18/<br>07/24/040/002<br>59/AM17/ The case was ratified in M. No. 15/81-<br>ALC2/2017 dated 17.10.2017 as per DIPP<br>comments vide U. O. No. 12/72/2017-<br>TSW/64 dated 17/10/2017. The applicant<br>vide letter dated 25.11.2019 stated that the<br>norms for the AA 0710111004 dated<br>19.01.2017<br>was<br>incorrectly<br>fixed<br>irrespective of the licence applied under no<br>norms repeat basis and requested for re-fix<br>the ad-hoc norms as approved for AA No.<br>0710105804 dated 17.07.2014 in M. No.<br>21/81 dated 27.01.2016. The applicant‟s<br>representation was forwarded to DPIIT on<br>31.01.2020 for examination of the case.<br>The case was last considered in M. No.<br>22/81 dt. 19.02.2020, the Committee noted<br>that the request has been received beyond<br>90 days from last decision. Hence, the<br>Committee decided to ask the applicant to<br>deposit a composition fee of Rs.5000/- for<br>considering revision of the case. The<br>applicant‟s reply received on 20.03.2020<br>they have furnished a copy of composition<br>fee receipt of Rs.5000/- deposited on<br>17.03.2020<br>along<br>with<br>representation<br>which was sent to DPIIT on 20.03.2020.<br>DPIIT informed that the matter may be<br>consulted with MSME. Representation<br>forwarded to MSME on 07.07.2020 for<br>examination of the case. Also additional<br>information received from the applicant via<br>email dated 09.07.2020 forwarded to<br>MSME on 09.07.2020. The<br>Committee<br>considered the case as per<br>the agenda and decided to<br>revise the ad-hoc norms<br>as per written comments<br>given by MSME via<br>email dated 09.07.2020<br>as under:<br>1. Quantity<br>of<br>relevant<br>import<br>item<br>may<br>be<br>allowed as 4988.80<br>MT inclusive of7%<br>wastage.<br>Note:<br>1. Average<br>lead<br>content of import<br>item may be taken<br>as 53.5%.<br>2. Lead percent in<br>export product at<br>Sl. No. 1 and 3 is<br>99%.<br>Concerned RA may take<br>consequential<br>action<br>accordingly. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>Approved
R60
LAXMI<br>ELECTRONICS <br>01/81/050/000<br>90/AM14/ Initially, the case was rejected in M. No.<br>8/81-ALC2/2015 dated 28.07.2015 due to <br> <br>The<br>Committee<br>considered the case asper <br> <br>Rejected
R61

95 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

MOULDS &<br>PRECISION<br>ENGG P. LTD.<br>0710094713<br>dated<br>09.04.2013 07/24/040/005<br>23/AM13/ non submission of reply deficiency letter<br>dated 11.12.2014 raised by DeitY. However,<br>the applicant vide letter dated 09.12.2017 &<br>30.01.2018 furnished the reply with a request<br>to fix the ad-hoc norms. The case was again<br>considered in M. No. 7/81dated 10.07.2019<br>and norms were ratified as per written<br>comments given by Consultant (TEC-1).<br>Now,<br>the<br>applicant<br>vide<br>letter<br>dated<br>03.01.2020 had requested to revise the ratify<br>norms for the materials imported against<br>export of catheters. As per decision of<br>meeting no. 22/81 dt. 19.02.2020, the case<br>has been referred to Consultant (TEC-1) on<br>15.06.2020 <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>agenda.<br>Consultant<br>(TEC-1) informed that<br>the<br>applicant<br>has<br>requested<br>for<br>enhancement of quantity<br>of raw material No.1<br>PVC<br>compound<br>from<br>1.05 kg/kg to 1.08 kg/kg.<br>No justification has been<br>given by the applicant.<br>Hence, based on written<br>comments of Consultant<br>(TEC-1) received vide<br>email dated 09.07.2020,<br>the Committee decided to<br>maintainstatus quo. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>
SYNERGIES<br>CASTINGS<br>LIMITED VSEZ File No.<br>8/EOU-<br>326/VSEZ/202<br>0/312 <br>Office of DC, VSEZ, Visakhapatnam vide<br>letter dated 14.01.2020 had referred a copy of<br>application dated 02.05.2017 of Synergies<br>Castings Limited stating that the unit is a<br>100% EOU manufacturer and exporter of<br>Aluminium Alloy Wheels and requested for<br>fixation<br>of<br>wastage<br>norms.<br>The<br>representation was forwarded to DPIIT on<br>31.01.2020. However, no comments have<br>been received yet. In M. No. 22/81 dt.<br>19.02.2020, the Committee decided to wait<br>for comments. DPIIT informed via email<br>dated 03.06.2020 that the matter may be<br>consulted with MSME. <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>As<br>recommended<br>by<br>DPIIT, the Committee<br>decided to refer the case<br>to<br>MSME<br>for<br>examination<br>and<br>comments. <br> <br> <br> <br> <br>Deferred
R62

96 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

FCI OEN Connectors Limited The Committee noted the Deferred The norms for referred Aas were decided by written comments given Norms Committee -2 in its Meeting No. AA Nos. 1010059417 dated by Consultant (TEC-3) 24/81 dated 18.03.2020 as per the study 29.02.2016, 1010059344 dated and decided to wait for group report. As decided in the Meeting, a 17.12.2015, 1010059345 dated comments of MeitY copy of the study group report were provided 17.12.2015, 1010059352 dated before deciding the to RA Cochin as well as the applicant vide 30.12.2015, 1010059409 dated matter. email dated 8.6.2020 for taking further 16.02.2016, 1010059410 dated necessary action. However, the applicant 16.02.2016, 1010059426 dated vide email dated 10.6.2020 filed review 04.03.2016, 1010059434 dated application by stating that he has to incur 21.03.2016, 1010059476 dated huge losses on GPC and PdTS if its 11.05.2016, 1010059568 dated authorizations are 97inalized as per study 28.07.2016, 1010059351 dated group report. The applicant has requested to 30.12.2015, 1010059732 dated R63 allow wastages @ 2% on GPC and PdTS, as 23.02.2017 1010059569 dated approved by the Committee earlier on the 28.07.2016, 1010059623 dated recommendations of MeitY. 05.10.2016, 1010059624 dated Since, the party was contesting the findings 05.10.2016, 1010059636 dated of the study group report, comment on the 25.10.2016, 1010059638 dated representation were sought from the 25.10.2016, 1010059661 dated Technical Members of the study group viz. 06.12.2016, 1010059679 dated MeitY and Consultant (VCA) on whether an 05.01.2017, 1010059691 dated option can be provided to the applicant to 13.01.2017, 1010059721 dated allow wastages either as per report or @ 2% 15.02.2017, 1010059607 dated on GPC and PdTS. 09.09.2016, 1010059734 dated 09.03.2017 1010059308 dated Comments of Consultant (VCA) have been 11.11.2015, 1010059346 dated received vide email dated 18.06.2020. 18.12.2015

The meeting ended with the vote of thanks to the Chair.

(Shobhit Gupta) Deputy Directorate General of Foreign Trade Tel. No.: 23061562 Ext. 341 shobhit.gupta@nic.in nc2.dgft@nic.in

97 | Page 97 Minutes of NC-2 Meeting No. 04/81 scheduled for 17.06.2020 and held on 09.07.2020

SDF

Export Items: Export Items: Export Items: Export Items: Export Items: Export Items: Export Items: Export Items: Export Items:
1 Model number, technical specification and specific quantity-both in terms of number (if<br>
any)and/or weight,of each exportproduct(Appendix-33 of current HBP refers).
2 Detail technical note on manufacturing process includingthe relevant flowsheet.
3 Detail technical drawings with dimension of each export product, Catalogue, if any, may<br>also be furnished.
4 Weiht of each Exort Product
g p.
5 Weight of each of the imported and indigenous input, separately for each product, for the
<br>purpose of material<br>imported and indigen<br>with details of other <br>balancing. Net weight (Gros<br>ous input in the export produc<br>imported input to be used in th <br>s weight minus wastage<br>t may be indicated. Net w<br>e resultant product and so <br>) for each<br>eight along<br>ught to be
imported/procured fr om sources other than the licen se,if any,mayalso be ind icated.
I mp ort Items:
6 Information about the inputs required per unit of the resultant product as per Sl. No. 1 of<br>Appendix-11A appearingin current HBP(Vol.I)separatelyfor eachproduct.
Com ponents:
7 Technical characteristics /part numbers,if any.
8 Assembly drawings/diagrams of the resultant product showing placement and exact use<br>of components in the exportproduct(s).
9 Bifurcated quantities of components to be accounted for in the resultant product and the<br>i f R Mil / Cbl
requrement o comp onents as spares. aw atera onsumaes.
10 Size and specificatio<br>proposed for import. n including grade, compositio<br> n, range, thickness etc. o f the items
11 Starting from the spe cification of the export produc t basic calculation as to h ow of raw
<br>material proposed fo<br>to be manufactured <br>r import has been arrived at, inc<br>out of these imported material ,<br>luding the net weight of c<br>s, wastages claimed at ea <br>omponents<br>ch stage of
<br>manufacturing<br>with<br>complete<br>justification<br>and<br>supported<br>by<br>documentary<br>evidence/drawings etc.
11(a) Sheet layout diagram of the material indicatingthewastage duringblanking.
12 Cross Sectional Diagram of export product with calculation of raw material requirement<br>and the weight of the Cable in Kg. per Km. Copy of relevant National/International<br>Standard/buyer’s data sheet mayalso be furnished.
13 Weight of Steel, which requires imported welding material, giving break-up of:<br>i)<br>Steel Plates/Sheets upto 30mm thickness
ii)<br>Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness<br>
iii) Steel Plat<br>iv) Others e. es/Sheets more than 70 mm thick<br>g.Flanges,Pipes,Tubes,Bars/Ro ness.<br>ds, Castings/Forgings etc.
14 Particulars of t<br> he licenses obtained in the past<br> and ratified by ALC (with<br> or without<br>
modification) f<br>PublicNoticeN or the same export product cov<br>o.48dated 14.11.2002. ered under this application, n view of
15 Use of exort odct
p pu.
16 You are advised to applyfor SION.
17 Please use expanded/full name of endproduct.Do not use the abbreviations/short form.
18 --
19 Any other information:
20 The information called for must be submittedin duplicate within 15 daysfrom the date<br>of issue of this letter. The information may be directly sent to Chairman, NC-II, O/o<br>DGFT,UdyogBhawan,New Delhi-110011,Office Telephone No.: 23061562,Extn.267.

==> picture [595 x 366] intentionally omitted <==

21

104631/2020/IPHW

Calculation Sheet: 0710116046 Gaviranga

==> picture [453 x 196] intentionally omitted <==

----- Start of picture text -----<br> Export Item (A) Import Item Qty. Sought UOM Per unit Wastage Claimed Wastage Qty. recommended<br>consumption (B) allowed (C)<br>83/0- OTHER<br>TRANSFORMERS:<br>On net to net basis<br>HAVING EI 42.0 x 35 LAMINATIONS<br>A POWER HANDLING (Parts of Transformers) 5200 KG 0.130 Nil 0.00% with Accountability Clause on Nil<br>CAPACITY NOT CORE<br>EXCEEDING 1 KVA Wastage<br>"40,000 Quantity"<br>EI 42 x 14.8mm SS COIL<br>FORMER (Parts of 40000 Number 1 Nil 0.00% On net to net basis<br>Transformers) with Nil Wastage<br>COIL FORMER / BOBBIN<br>EI 42 x 14.8mm SHROUD (Set<br>of 2 pcs) (Parts of 40000 Number 1 Nil 0.00% On net to net basis<br>Transformers) with Nil Wastage<br>SHROUD<br>----- End of picture text -----<br>

==> picture [595 x 364] intentionally omitted <==

16

104627/2020/IPHW

Calculation Sheet: 0710116047 Gaviranga

==> picture [451 x 183] intentionally omitted <==

----- Start of picture text -----<br> Export Item (A) Import Item Qty. Sought UOM Per unit Wastage Claimed Wastage Qty. recommended<br>consumption (B) allowed (C)<br>OTHER TRANSFORMERS:<br>HAVING<br>On net to net basis<br>A POWER HANDLING CAPACITY EI 54.0 X 45 LAMINATIONS<br>NOT [Parts of Transformers] 15000 KG 0.375 Nil 0.00% with Accountability Clause on Nil<br>EXCEEDING 1 KVA "40,000 CORE<br>Quantity" Wastage<br>EI 54 x 25.5mm SS COIL<br>FORMER [Parts of 40000 Number 1 Nil 0.00% On net to net basis<br>Transformers] with Nil Wastage<br>COIL FORMER / BOBBIN<br>EI 54 x 25.5mm SHROUD (Set<br>of 2 pcs) [Parts of 40000 Number 1 Nil 0.00% On net to net basis<br>Transformers with Nil Wastage<br>SHROUD<br>----- End of picture text -----<br>

Government of India

Director General of Foreign Trade

HQ File No:

(i) 01/81/050/00409/AM17/ (ii) 01/81/050/00524/AM17/ (iii) 01/81/050/00659/AM17

Advance Authorization No. 2610012779 dated 15.12.2016, 2610012767 dated 17.08.2015 and 2610012763 dated 14.07.2016

M/s Veekay Smelters Pvt Limited, Peddapuram (A.P)

The applicant has represented against the decision of the NORMS Committee whereby they were allowed 613 Kg Aluminium Grannuals as reductant against export of 1000 Kg Low Carbon Ferro Chrome required for production of stainless steel 300 series having extra low carbon.

However, by considering stichometric calculation for reduction of Chromite (Cr2O3), Iron Oxide (FeO), Silicon Dioxide (SiO2), retained aluminium in the product, reduction of Sodium Nitrate (Na2No3) as energizer to boot the heat of formation; 15% excess requirement of Aluminium Granuals as reductant in order to get optimum chromium recovery, 99% aluminium contained in aluminum granuals and 98% yield of the alumina thermic process, the quantity of Aluminum Granuals works out to 830 Kg instead 912 Kg , as has been requested by the applicant for production and export of Low Carbon Ferro Chrome.

In view of the above, NC-II may allow 830 Kg Aluminum Granuals for production and export of Low Carbon Ferro Chrome ( Cr: 66% Fe: 28.2%, Si: 1.5%, Al: 3.5%, Other:0,05%).

==> picture [78 x 27] intentionally omitted <==

(S.K. Bhatnager) TC (SKB) 18.05.2020

Shri Shobhit Gupta, Dy DGFT, NC-II

Government of India Director General of Foreign Trade

HQ File No: 07/24/040/00216/AM18

Advance Authorization No. 0710112458 dated 24.11.2017

M/s VEER-O-METALS PVT LTD, BANGALORE

The following Quantity of items of import may be allowed against export:

ITCHS<br>Code Export Item Quantity ITCHS<br>Code Import<br>Item Quantity to<br>be allowed
85049090 Sheet<br>Metal<br>Components:<br>Net<br>Content<br>of<br>Raw<br>Materials:<br>(i) GI Coils-205.59<br>MT<br>(ii)<br>Rivets/Fasteners-<br>Net To Net Basis 216.412<br>MT 72104900 GI Coils Import<br>Quantity<br>may<br>be<br>allowed<br>240.54 MT<br>of relevant<br>grade and<br>thickness<br>inclusive of<br>17%<br>wastage<br>after 1/3rd<br>recovery.
73182990 Rivets &<br>Fastener<br>s As<br>per<br>GN-4

==> picture [110 x 33] intentionally omitted <==

(S.K. Bhatnager) TC(SKB) 28.04.2020

Shri Shobhit Gupta Dy DGFT, NC-II

ITCHS Export Item Quantity ITCHS Import Quantity to
Code Code Item be allowed
85049090 Sheet Metal 313.615 72104900 GI Coils Import
Components: Net MT Quantity
Content of Raw may be
Materials: allowed
335.52<br>MT
(i) GI Coils-277.296 of relevant
MT grade<br>and
thickness
(ii) inclusive of
Rivets/F asteners- 21%
Net To Net Basis wastage
after<br>1/3rd
recovery.
73182990 Rivets & As<br>per
Fastener GN-4
s

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.

Citation copied