==> picture [490 x 109] intentionally omitted <==

==> picture [2 x 2] intentionally omitted <==

==> picture [11 x 26] intentionally omitted <==

==> picture [334 x 111] intentionally omitted <==

==> picture [169 x 236] intentionally omitted <==

|1.NetⅥ′eight of<br>23.45M丁′1.99<br>2.Sizesofcables<br>zes|cables at export item S:.No.l to 9 may be specfied as 71.165M丁<br>′125.51l M丁′<br>|<br>MT′ 33.382M丁′12.333 MT′ 30.859 MT)15.528M丁′8L l.99 MT respectively<br>under:<br>atSl.No.1to9maybespecifiedas|cables at export item S:.No.l to 9 may be specfied as 71.165M丁<br>′125.51l M丁′<br>|<br>MT′ 33.382M丁′12.333 MT′ 30.859 MT)15.528M丁′8L l.99 MT respectively<br>under:<br>atSl.No.1to9maybespecifiedas|cables at export item S:.No.l to 9 may be specfied as 71.165M丁<br>′125.51l M丁′<br>|<br>MT′ 33.382M丁′12.333 MT′ 30.859 MT)15.528M丁′8L l.99 MT respectively<br>under:<br>atSl.No.1to9maybespecifiedas|
|---|---|---|---|
|Export|Sizesofcables|||
|itemNo.||||
|1||3.5 Corex 150 Sq mm||
|||3.5Corex185Sq.mm||
|||3.5Core x240Sq.mm||
||4|3.5Corex120Sq.mm||
|||3,5Core x 70 Sq.mm||
||6|3.5Core x 50 Sq.mm<br>10 PxO.5Sq mm||
|||20 PxO.5 Sq.rn m||
||3|10 Tx 2.5 Sq.mm||
||4|20Tx2.5Sq.mm||
|||2Px1Sq.mm||
||6|21 Px2.5 Sq.mm                   .||
||1|3 Core x95Sq.mm||
|4||1Core x240Sq.mm||
||2|1 Core x 50Sq.mm||
|||2x2.5+2.5Sq.mm||
|||2x4+4 Sq.mm||
||3<br>4|2x6+6Sq.mm<br>2x10+10 Sq.mm||
||5|3 x 2.5+2.5Sq.mm||
||6|3x4+4 Sq.mm||
||7|3x10+10Sq.mm||
||8|3x16 +16 Sq.mm||
||9|3 x 35 +25Sq.mm||
||10<br>14|2x 50+1x25Sq.mm<br>3x120+70 Sq.mm<br>2x150+lx95+lx95 Sq・mm<br>3x70 Sq.mm■lx35+lx35 Sq.mm<br>3x25+25 Sq.mm||
|6||1 Core x240Sq.mm||
|||l Core x 6,O Sq.mm||
|||1Pairx1.5Sq.mm||
|||20 Pa:rxl.5 Sq・rn m||
|||12 Pairx l.5 Sq.rn m||
||4|5Pairx1.5Sq.mm||
|||1Tx1.5 Sq.mm||
|8||2 Core x 2.5 Sq.mm||
|||10 Core x 2.5 Sq.mm||
|||20 Core x 2.5Sq.mm||
||4|40Core x 2.5Sq.mm||
|9|1<br>2|!!qtex 2.5 Sq.mm<br>5 Sq・mm||
|||…||

|融再常霜｀こ<br>l“itta|to|―――――― <br>send a rerninder to the f1111l to expedite|―――――― <br>send a rerninder to the f1111l to expedite|<br>―s、<br>‐<br>1派嘉薦81肩籠面粟高語<br>|<br>the reply|<br>―s、<br>‐<br>1派嘉薦81肩籠面粟高語<br>|<br>the reply|<br>―s、<br>‐<br>1派嘉薦81肩籠面粟高語<br>|<br>the reply|
|---|---|---|---|---|---|---|
|ICase No.:23/19/81‐ ALC2/2013|1Party||Name:ALSTOM INDIA<br>蠅STMNHA騨||ト|IApproved|
|IHQmeЮ<br>ν8115γ00337晨Ml″||押<br>F両|柵<br>繭<br>両<br>面<br>1需肝|:副<br>“<br>繭|耐|~―<br>||

==> picture [486 x 122] intentionally omitted <==

==> picture [10 x 13] intentionally omitted <==

==> picture [2 x 3] intentionally omitted <==

==> picture [350 x 278] intentionally omitted <==

==> picture [132 x 49] intentionally omitted <==

	3	4Core x 35 Sq.mm
	4	4Corex15 Sq. mm
	5	4Core x 70 Sq.mm
	6	4.5 x300 +70GSQ
		4.5x300 +35GSQ
	8	4.5 x300 +25GSQ
	9	4.5 x150+35GSQ
	10	4.5x150+25GSQ
		4.5 x\20+25GSQ
		4.5xL2O+15 GSe
		4.5x70+16GSQ
	14	4.5x 25 +10GSQ
	15	4.5x15+10GSQ
	16	4.5x16 +6GSQ
	17	4x16 +16GSQ
	18	4x10+10GSQ
2	1	2 Core x 6 Sq.mmunarmoured
		1Pairx1.5Sq.mmarmoured
3		3 Core x 240 Sq.mm
		3 Corex185Sq.mm
4		3 Corex120Sq.mm<br>3 Core x 95 Sq.mm
		2 Core x 95 Sq.mm
	2	?!g.ex 25 Sq.mm
	3	4Corex400Sq.mm
	4<br>5	Zl9I"r4Sq.mm<br>5Pairx1.5Sq.mm
	6	19 Pairx o.75 Sq.mm
	7	20 Pairx1.5Sq.mm
	8	5Pairx1.5Sq.mm
6	9<br>t	20Pair x0.75Sq.mm<br>2 Corex120Sq_mm
	2	2 Core x 35 Sq.mm
	3<br>4<br>5	P COre Xp5 Sq.mm<br>1!9ry,185sq. mm<br>7 Core x 2.5 Sq.mm
	6	19 Corex1.5Sq.mm
7		27Corex1.5Sq.mm<br>5Pair x0.75Sq.mm

|dffi|||||
|---|---|---|---|---|
|.||||||
|‐<br>Case No.:56/10/81‐ALC2/2014|Name:GRAVITA INDIA|Mcet No/Date:16/81‐<br>ALC2/2014<br>113.01.2015|||
|||ILicoNo/Date:1310047400<br>117.06.2014|Defer<br>Date:l7.04.2015||

==> picture [241 x 97] intentionally omitted <==

==> picture [24 x 22] intentionally omitted <==

==> picture [208 x 57] intentionally omitted <==

==> picture [486 x 94] intentionally omitted <==

	"	““<br>	―	―
	一
He	ozsstet\4tstnle<br> File:01/81/050/01 ,	■1_i■■,1.■<br>,■ス<br> Fite:05t231040/00246/AMl4/Lic.No/Date:0510389765<br>":v)tL)tvavtwvLawt^trt',Ti.ol.zotq			'Defer<br>Date:r7:04.:2015

==> picture [502 x 187] intentionally omitted <==

case No.:2/13/81‐ALC2/2014	NameiMANAKSIA LTD(<br>Y HINDUSTHAN<br>LTD.)	No/Date:16/81‐
IHQ File:01/81/050/00418/AM15/	File:02/24/040/00123/AM15/	5.09.2014	17.04.2015

卜QΠL劇慇ソ05υ004“/AMl夕	繭	面	繭	面	耐	翻	需	m3%B61<br>of C&PCvideO'M'

==> picture [11 x 14] intentionally omitted <==

==> picture [487 x 92] intentionally omitted <==

==> picture [129 x 35] intentionally omitted <==

==> picture [146 x 23] intentionally omitted <==

==> picture [484 x 260] intentionally omitted <==

Casc No AR-81	M/sVijaiElectricalsLtd.
MeetingNo.16/8I	F No O1/81/050/00446/Aヽ409/DES‐ lI
Dated:- 1301 2015	Rcquest for amendment in ad― hoc noHns in rcspcct ol AdVancc LiCCnCe No
	0910035596 datcd 08 10 2008
	RLA「N009/24/040/00273/AM09

casc NO AR-98	M/s Dynatech FumaceS PVt Ltd
MeetingNo.l618I	F No O1/81/050/00192/AM10/DES―	II
Datcd:- 1301 2015	Requcst fOr amcndmcntin ad― hOC norms in respccl o1/ヽ●V alし0し1
	0310526069 dated 26 06 2009
	RLA R Nα 田卿餌υ剛<br>■ハMЮ

Case No.AR 04	M/sKalpanaIrrternational
MeetingNo.l6181	E Nl^<br>A1 lotl<Ataott^1,.<br>01/JU/年64/AlVll U/JりLS-11
Dated:-13.01.2015	p<br>C<br>・｀しЧいし。し lυlこ111じilumcllI In i∪nOrms<br>0610016468 dated 28.10.2009.	in respect ofAdvanceauthorizationN.,
	pr<br>r .lNυ.VO/∠4/牛U/Z//AⅣllU/

==> picture [444 x 81] intentionally omitted <==

==> picture [506 x 283] intentionally omitted <==

==> picture [477 x 245] intentionally omitted <==

.<br>QuantitiesofimportitematSl.<br>cluefromSIONC-831:	No.1<br>may	beallowedasunderasclaimedbyt	hefirmaft	er	taking
Exportitem<br>StainlessSteelSeamless	Quantity<br>].MT	lmport item<br>RelevantSeamlessStainless	Quantity<br>1.14いИT
Tubes/Pipes(ColdFinished)<br>GradeTP3161		SteelTubes/PiPes(HotFinished)<br>GradeTP3161
OD 13mm&less<br>StainlessSteelSeamless<br>Tubes/Pipes(ColdFinished)	1.MT	OD 73.72mm&above<br>RelevantSeamlessStainless<br>SteelTubes/PiPes(HotFinished)	1.18 MT
GradeTP3161		GradeTP3161
OD 32mm&less<br>StainlessSteelSeamless<br>Tubes/PiPes(ColdFinished)	1MT	OD33.40mm&above<br>RelevantSeamlessStainless<br>SteelTubes/PiPes(HotFinished)	1.■8Mi
GradeTP316L		GradeTP3L6L
+.uantitiesofimportitemsfromSl'No'<br>OD40mm&less		2<br>to7Puttogether<br>maybeallowedupto2<br>OD42mm&above		0/。	of FOB
value of exportsaftertaking cluefromSION<br>c-831.

==> picture [2 x 18] intentionally omitted <==

Exportitem<br>Quantity<br>Stainless steel seanlless<br>丁ubes/ Pipes(cOid Finished)<br>Grade ttP 304L<br>OD13 mm&less<br>l MT<br>bla:niess steei seamless<br>丁ubes/ Pipes(cOld Finished)<br>Grade ttP 304L<br>OD32 mm&less<br>lM丁<br>stamたss sted売<br>Tubes/ Pipes(cOld Finished)<br>Grade TP 304L<br>OD40 mm&less<br>lM丁<br>	lmportitem<br>Relevant seamless stainless<br>Steel丁ubes/Pipes(HOt Finished)<br>Grade ttP 304L<br>OD 13.72 mm&abOve<br>Relevant seamlessヽ<br>Steel丁ubes/Pipes(HOt Finished)<br>Grade ttP 304L<br>OD 33.40 mm&above<br>Re:evant seamless stainless<br>Steel ttubes/Pipes(Hot Finished)<br>Grade TP 304L<br>OD42 mm&above	Quantity<br>1.14M丁<br>1.18 MT<br>1.18M丁

Case No.AR 56	M/s.VoithHydroPvt.Limited
MeetingNo.l6181	F.No.01/81/50/427/AM13/DES― II
Dated:‐ 13.01.2015	Request for amendment of Norrns in respect of Advance Authorisation No.
	0510340125 dated 05.12.2012
	RLA F.No.05/24/040/334/AM13/

CaseNo.AR	M/s.Puni Lloyd Limited
MeetingNo.l6181	F.No.01/81/50/449/AM13/DES― II
Datcd:-13.01.2015	Request for amendment of Norms<br>0310718100 dated 24.12.2012<br>inrespect oT AOVanCe AulnO「:5aLiυH
	RLA FoNo.03/95/040/712/AM13/
讐~丁了~=τ=T~~デ丁五=¬置可=TTTπ=====薫<br>話萬=T石<br>訴耶=再百五蒸冨冨Ind deferred to 17.04.2015.<br>Decision:NC observed that the case is under exanlination at E)IPP.The case stι

==> picture [12 x 30] intentionally omitted <==

ItemtobeExported	Quantity
PlasticMouldedComponents	l kg
(Antenna Frame/Lid)
Raw-materialrecommendedforImport	Quantity
Reievant Polycarbonate Resin	1.05kg/kgcontentin
(CycoloyC1200HF,Black76701)	the exportproduct

z.04.2or4ontrre sujec <br>e.TheDepartmentofChemicals&petrochemica<br>utionApplicationonthefollowingbasis:-	<br>rs recommendsthepresent A
Item tobeErPorted
E*tf,Pi"-Partofcharger
(Made OfNylon-66 Resln)
ヾoo 901510<br>面<br>_material recommeldelf° r lmpOrt	1.05 Kg / kg cOntent ln
(30%Glass Fibre reinおrced Nylon-66 Resin)	the export Product

==> picture [99 x 18] intentionally omitted <==

Size<br>4CX 2.5 mm2<br>4CX 10mm2<br>4CX 16mm2<br>4CX 25 mm2<br>4CX 35mm2<br>4CX 50 mm2<br>4 C X 70rnm2<br>4CX 95 mm2<br>4CX 120 mm2<br>4 CX 150 mm2<br>TOTAL	otv.in Kms.<br>1.6<br>2.4<br>2.0<br>6.0<br>2.0<br>3.0<br>6.5<br>5.0<br>2.0<br>2.5<br>33	Net Export<br>Weiqht(Kgs.)<br>914<br>2364<br>2432<br>8937<br>3919<br>8337<br>22909<br>22616<br>12110<br>17652<br>102190

==> picture [144 x 37] intentionally omitted <==

==> picture [154 x 59] intentionally omitted <==

==> picture [134 x 47] intentionally omitted <==

==> picture [105 x 71] intentionally omitted <==

Export Product<br>5OOMVAI.Ph.<br>Auto<br>Transformer<br>withOnLoad	Net<br>¬t/unit<br>of EP<br>30010o<br>kg	ImportItems<br>1. CRGOTransformer<br>Laminations.	Quantity<br>recommended/unitofEp<br>103793 kg.with nilwastage<br>considering laminationsas<br>components.
Tap Changer		5.CopperWindingWire.	11200kg.\Mith1%wastage.
		6.Copper WireRod	2O24akg.v/ith1%wastage.
		4.-59.Components	Netto netbasisasper<br>conditionof GN4 for<br>engineerinsoroductsI

==> picture [44 x 56] intentionally omitted <==

Reference above,the application and subsequent reply subn■<br>itted by the<br>fl..1l vide their letter dated 24.05.2014 has been exanlined and based on<br>info■1■■ation made available therein, the proposal is recorninended as per
following modiication:
Export<br>Product<br>Net<br>Wt。/Set Of<br>EP<br>Importitems<br>Quantityrecommended/setof<br>EP<br>Statorcore<br>laminations<br>for417MW<br>Hydro<br>generator<br>283109<br>kg.<br>i.<br>ElectricalSteel<br>Coil(Varnished).<br>ii.<br>Electricalsteel<br>coil(Unvarnished)<br>iii.<br>I ductspacer.<br>iv.<br>ThinnerSPEZS<br>219130 kg.with 10%wastage.<br>2993 kgo with 100/O wastage.<br>:3:lp恣、身<br>lぶ∬糧習。ノ
β∴論・<br> <br>Sr.Development Offlcer<br>ThisissuewithtJ:eapprovalofAS(S).

==> picture [134 x 79] intentionally omitted <==

==> picture [26 x 22] intentionally omitted <==

==> picture [177 x 243] intentionally omitted <==

==> picture [259 x 87] intentionally omitted <==

	&199MTresPe	&199MTresPe	&199MTresPe	&199MTresPe	ctivelY	ctivelY
<br>2.S	. <br>izesofcablesat				Sl.No. lto 9<br>rt<br>at<br>0<br>to		be	ifiedasunder:
	Export		Sizesofcables
	itemNo.
	1		l		3.5 Corex150 Sq.mm
			2		3.5 Corex185 Sq.mm
					3.5 Core x240Sq.mm
			4		3.5Corex120Sq.mm
			5		3.5 Corex70Sq.mm
	2		6<br>l		3.5 Core x 50 Sq.mm<br>10 PxO.5Sq mm
			2<br>J		20Px 0.5Sq.mm<br>10Tx2.5 Sq.mm
			4		20Tx 2.5 Sq.mm
			6		2PxlSq.mm<br>21 Px2.5 Sq.mm
			1		3 Corex95Sq.mm
	4		1		ICorex 240Sq.mm
			2		ICorex50Sq.mm
			1		2x2.5+2.5Sq.mm
			2<br>4		2x4+4Sq.mm<br>2x6+6 Sq.mm<br>2xlQ+10Sq.mm
					3x2.5+2.5Sq.mm
			6<br>7		3x4+4Sq.mm<br>3x10+10Sq mm<br>3*16+16Sq.mm
			9	o	3yfJ+25Sq.mm<br> Tzso+txE.**
				tT:xtzo+zosq.mm<br>z I ziso+1x95+1x95Sq.mm<br>tT3-?0Sq-rm+!,<11;L!x3!		Jg..m1q
				4	3*25+25Sq.mm
		6	2<br>1		ICorex 240Sq.mm<br>ICore x630Sq.mm
		7	1		IPairx1.5 Sq.mm
			う<br>４		20Pairx1.5Sq.mlq
					12Pairx1.5Sq.mm
			4		5 Pairx1.5Sq. mm
			5		lTxl.5Sq.mm
				1	2Core x2.5Sq. mm

==> picture [46 x 21] intentionally omitted <==

==> picture [40 x 46] intentionally omitted <==

==> picture [223 x 50] intentionally omitted <==

==> picture [47 x 35] intentionally omitted <==

==> picture [5 x 5] intentionally omitted <==

==> picture [12 x 14] intentionally omitted <==

==> picture [59 x 26] intentionally omitted <==

==> picture [158 x 85] intentionally omitted <==

==> picture [20 x 25] intentionally omitted <==

==> picture [144 x 61] intentionally omitted <==

==> picture [319 x 174] intentionally omitted <==

==> picture [225 x 113] intentionally omitted <==

==> picture [56 x 42] intentionally omitted <==

==> picture [46 x 25] intentionally omitted <==

==> picture [3 x 4] intentionally omitted <==

==> picture [116 x 48] intentionally omitted <==

==> picture [8 x 11] intentionally omitted <==

==> picture [64 x 39] intentionally omitted <==

==> picture [387 x 274] intentionally omitted <==

==> picture [30 x 59] intentionally omitted <==

==> picture [232 x 62] intentionally omitted <==

1	3.S<br>izesofc	ables at	at Sl.No. l to	be
	Export	Sizes	ofcables
	itemNo.
	1	1<br>4Core x2.5Sq.mm
		2<br>4 Corex120 Sq.mm
		,<br>4Corex35Sq.mm
		4<br>4 Corex l6Sq.mm
		4Corex70Sq.mm<br>6<br>4.5x300+70 GSQ<br>7<br>4.5x300+35 GSQ<br>4.5x300+25 GSQ<br>9<br>4.5x<br>50+35 GSQ<br>0<br>4.5x<br>50+25 GSQ<br>l<br>4.5x 20+25 GSO<br>つ<br>４<br>45x<br>20+16 GSQ<br>4.5x70+16 GSO<br>14<br>4.5x25+10 GSQ<br>4.5x16+10 GSO<br>6<br>4.5x16+6 GSQ<br>7<br>4x16+16 GSO<br>4x10+10 GSQ
	つ<br>´	2	2Corex6Sq.mmunarmoured<br>IPairx1.5 Sq.mmarmoured
		1	3 Core x 240 Sq.mm
		つ<br>４	3 Corex185Sq.mm<br>3 Core x 120 Sq.mm
	4	1	3 Corex95Sq.mm
		l	2Corex95Sq.mm
		2<br>3	2Corex25Sq.mm<br>4 Core x 400 Sq.mm
		4	7 Core x4Sq.mm
		5	5 Pairx 1 5 Sq mm
		6	10 Pair x O.75 Sq.min
		7	20 Pair x l.5 Sq.mm
			5 Pair x l.5 Sq.mm
		9	20 Pair x 0 75 Sq.mm
	6	1	2 Corex120 Sq.mm
		2	2Corex35Sq.mm
			2 Core x 95 Sq. mm
		4	3 Core x 185 Sq.mm
騨		%ピ	ら用<br>ζ<br>iκ	-80-

==> picture [55 x 9] intentionally omitted <==

==> picture [41 x 15] intentionally omitted <==

==> picture [60 x 54] intentionally omitted <==

==> picture [152 x 57] intentionally omitted <==

==> picture [5 x 6] intentionally omitted <==

==> picture [111 x 46] intentionally omitted <==

==> picture [5 x 7] intentionally omitted <==

==> picture [377 x 95] intentionally omitted <==

==> picture [30 x 38] intentionally omitted <==

==> picture [55 x 29] intentionally omitted <==

==> picture [141 x 40] intentionally omitted <==

==> picture [247 x 107] intentionally omitted <==

==> picture [178 x 105] intentionally omitted <==

==> picture [155 x 106] intentionally omitted <==

==> picture [598 x 842] intentionally omitted <==

‥<br>・<br>。<br>Ｓ<br>Ｎ<br>1	Item ofexPort<br>Cold rolled stainlesssteel<br>coils/stripsofwidth60<br>MMto60.5mmof<br>Thickness0.19MMof<br>Grade 304L	Quantity<br>6158100<br>Kg	Itemof import<br>Cold rolledstainless<br>steel coilsof<br>thickness morethan<br>0.'19mmofwidth<br>100-1500mmof	Quantity<br>6342843 K9
			Grade 3041

==> picture [5 x 35] intentionally omitted <==

==> picture [46 x 34] intentionally omitted <==

==> picture [150 x 64] intentionally omitted <==

==> picture [154 x 88] intentionally omitted <==

1	Modelnumber. technical specilication and speciticquantit)-bothintermsofnumber(ifany)and/or
	rveight. of'each export product (Appendix-33ofcurrentHBPret'ers).
2	Detail technicalnote on manuf'acturingprocessincludingtherelevantflowsheet.
J	Detail technical drawingswithdimensionofeachexport product,Catalogue.ifany, may alsobe
	f'urnished.
4	Weight ol'each ExportProdr.rct.
5	Weightofeachofthe irnported and indigenous input.separatelyfbreachproduct.tbrthepurposeof
	material balancing.Netu'eight(Grossrveight minuswastage)foreachimportedand indigenousinput
	inthe exportproductmalbe indicated.Net lveightalongrvithdetailsot'otherimported inputtobe
	usedintheresultant productand soughttobeimportediprocuredf'rom sources other than the Iicense.il
	any,ma)also be indicated.
Import	ltems:

7	Technicalcharacteristics/part numbers,ilany
	Assemblydra,,r'ings/diagramsoltheresultantproduct showingplacement and exactuseofcomponents
	irrthee<br>s)
	Biturcatedquarrtitiesofcomponentstobeaccountedfbrinthe resultantproductand the requirementof
	componentsas spares.RarvMaterial /Consumables
	Size andspecification includinggrade,cornposition. range, thickness etc.oftheitemsproposedfor
	import
ll	Startingfiomthe speciticationofthe exportproduct. basiccalculationastohowofrawmaterial
	proposedtbrimporthas beenarrived at. including the netweightofcomponentstobe manufactured<br>outoftheseimportedmaterials,wastagesclaimedateach stageofmanuf'acturingwithcomplete
	.justificationand supported by documentaryevidence/drawingsetc
Il(a)	Sheetlayout diagramofthematerial indicatingthe wastageduring blanking
	CrossSectional Diagramofexportproductwithcalculation ofrarvmaterialrequirementandther.veight
	o1'the CableinKg.perKm.Copy olreler,'ant National/lrrternationalStandard/buy'er''s data sheetma-1,
	also be furnished.
	WeightofSteel.whichrequiresimported rvelding material.givingbreak-upof':<br>(lxxiii)Steel Plates/Sheets upto 30mm thickness
	(lxxir,)Steel Plates/Sheets more than 30 mnr thickness andupto70mmthickness<br>(lxxv)Steel Plates/Sheets more than 70 mm rhickness.<br>(lxxvi)Others e.g. Flanges. Pipes. Tubes. Bars/Rods. Castings/Forgingsetc.
	Particularsot'thelicensesobtainedirr the past andratifled<br>b1ALC(u,ithorwithoutmoditication) for
	thesameexporlproductcovered underthisapplication.<br>invieu,olPublic NoticeNo.48dated
	14.fi.2002.
	Useofexportproduct
	Youale adl isedto apply tbrSION
	Please useexpanded/fullnameofendproduct.Do notusetteaU6rwiatlonststto.t t'orrn
	Itis not clearfiomthe details given in applicationtbrthe AdvanceAuthorizationmentionedaborre.as
	towhethelitis acaseofPhysicalexportsorDeemedexports.Ifthe sameisDeemed Exports.copyof<br>Pro.iectAuthorityCertificate (PAC)anddetaile<jinfbrmationalongrvith relevantdocumentsmaybe