IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION)

MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Feb/202526/17 DATED: 10/03/2026

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Feb/202526/17 dated 10/03/2026 of Norms Committee - I for the year 2025-26 was held on 10/03/2026 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation Department 1 Shri Randheep Thakur, Jt.DGFT DGFT UDIN00652597AM26 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director,DGFT(HQ) on 30-Mar-2026. Digitally Signed. Name: ASHWANI KUMAR OJHA( Deputy Director ) Date: 30-Mar-2026 17:26:16 Reason: ak.ojha90@gov.in Location: DGFT(HQ) Signature Not Verified

2 2 Shri Ashwani Kumar Ojha, Dy. Dir DGFT 3 Shri Kamlesh Kumar Singh, ASO DGFT 4 Shri S. K. Jain, Consultant DPIIT 5 Shri S.K. Bhatnagar, Consultant (SKB) Technical Consultant, DGFT 6 Shri V.C. Agarwal, Consultant (Tech-3) Technical Consultant, DGFT 7 Shri Saish Kumar, Consultant (Tech-1) Technical Consultant, DGFT

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Agarwal, Consultant (Tech-3) Technical Consultant, DGFT 7 Shri Saish Kumar, Consultant (Tech-1) Technical Consultant, DGFT

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Feb/ 202526/ 17 and 10/03/2026 HQ File Number HQRNORM APPLY 00002545AM26 RA File Number NA Licence No and Date NA

Norms Committee Decision:

. The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No. 0910066798 dated 02/11/2018 was earlier rejected by NC-1 in its meeting dated 15/11/2019 due to non-submission of the reply of deficiency letter. On 07-Aug-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that, no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review.

ther noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion. Case stands deferred.

Case No. 2 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002548AM26 RA File Number NA Licence No and Date NA .The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No.0910066799 dated 02/11/2018 was earlier
rejected by NC-1 in its meeting dated 15/11/2019 due to non-submission of the reply of deficiency letter. On 07-Aug-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

he said decision. It is quite evident that the firm has filed the present review application after the period of 12 months UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

4 from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that, no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

Case No. 3 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002572AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No.0910068852 dated 05/06/2020 was earlier
rejected by NC-1 in its meeting dated 12/10/2023 due to non-submission of the reply of deficiency letter. On 08-Aug-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website.

for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

Case No. 4 / NC/1/MEET/Feb/202526/17 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002573AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No. 0910066801 dated 02/11/2018 was earlier rejected by NC-1 in its meeting dated 15/11/2019 due to non-submission of the reply of deficiency letter. On 08-Aug-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website.

Case No. 5 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002657AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No. 0911001115 dated 25/06/2021 was earlier rejected by NC-1 in its meeting dated 31/01/2023 due to non-submission of the reply of deficiency letter. On 13-Aug-2025, the firm has filed application on portal for review of the said decision. It is UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

eply of deficiency letter. On 13-Aug-2025, the firm has filed application on portal for review of the said decision. It is UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

6 quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

Case No. 6 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003792AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No. 0510415802 dated 09/11/2020 was earlier
rejected by NC-1 in its meeting dated 25/11/2022 due to non-submission of the reply of deficiency letter. On 16-Oct-2025, the firm has filed application on portal for review of the said decision.

rejected by NC-1 in its meeting dated 25/11/2022 due to non-submission of the reply of deficiency letter. On 16-Oct-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

uch, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 7 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003923AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No.0310789333 dated 17/09/2014 was earlier rejected by NC-1 in its meeting dated 17/08/2015 and subsequently its review applications were also rejected in NC-1 meetings dated 03/06/2024 and 04/11/2024 due to non-submission of the reply of deficiency letter. On 27- Oct-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review.

Case No. 8 / NC/1/MEET/Feb/202526/17 Case Status Case Rejected Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003928AM26 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that in the instant case and in F.No. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

8 HQRNORMREVIW00002443AM25, the firm has sought ratification of ad-hoc norms in respect of same AA No. 0310828077. Hence, the Committee decided to close the present case pertaining to F.No. HQRNORMAPPLY00003928AM26, showing as rejected.

Case stands rejected.

Case No. 9 / NC/1/MEET/Feb/202526/17 Case Status Case Rejected Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003929AM26 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that in the instant case and in F.No. HQRNORMREVIW00002444AM25, the firm has sought ratification of ad-hoc norms in respect of same AA No.0310833455. Hence, the Committee decided to close the present case pertaining to F.No. HQRNORMAPPLY00003929AM26, showing as rejected.

Case stands rejected.

f ad-hoc norms in respect of same AA No.0310833455. Hence, the Committee decided to close the present case pertaining to F.No. HQRNORMAPPLY00003929AM26, showing as rejected.

Case stands rejected.

Case No. 10 / NC/1/MEET/Feb/202526/17 Case Status Case Rejected Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003930AM26 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that in the instant case and in UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

9 F.No.HQRNORMREVIW00002445AM25 i.e. in case No.16, the firm has sought ratification of ad-hoc norms in respect of same AA No. 0310795103. Hence, the Committee decided to close the present case pertaining to F.No. HQRNORMAPPLY00003930AM26, showing as rejected.

Case stands rejected.

Case No. 11 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005808AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of ad-norms against AA No. 0911003794 dated 13/10/2022 was earlier rejected by NC-1 in its meeting dated 12/10/2023 due to non-submission of the reply of deficiency letter. On 07-Feb-2026, the firm has filed application on portal for review of the said decision.

r rejected by NC-1 in its meeting dated 12/10/2023 due to non-submission of the reply of deficiency letter. On 07-Feb-2026, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

Case No. 12 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003535AM26 RA File Number NA UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

y Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003535AM26 RA File Number NA UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

10 Licence No and Date 0410083530/11/08/2006 The Committee considered the case as per agenda and noted that in the instant case, according to the firm, its request for ratification of ad-norms against AA No.0410083530 dated 11.08.2006 was earlier approved by NC-1 in its meeting dated 31.10.2006. On 04-Oct-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review.

Case No. 13 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003409AM26 RA File Number NA Licence No and Date 0410101778/22/01/2009 The Committee considered the case as per agenda and noted that in the instant case, according to the firm, its request for ratification of ad-norms against AA No. 0410101778 dated 22.01.2009 was earlier approved by NC-1 in its meeting dated 06.04.2010. On 24-Sep-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 14 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001753AM26 RA File Number 018005000325 AM10 Licence No and Date 0410107117/21/08/2009 The Committee considered the case as per agenda and noted that in the instant case, according to the firm, its request for ratification of ad-norms against AA No.0410107117 dated 21.08.2009 was earlier approved by NC-1 in its meeting dated 16.11.2010. On 27-Jun-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review.

Case No. 15 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001861AM26 RA File Number 018005000336 AM10 Licence No and Date 0410107196/25/08/2009 The Committee considered the case as per agenda and noted that in the instant case, according to the firm, its request for ratification of ad-norms against AA No. 0410107196 dated 25.08.2009 was earlier approved by NC-1 in its meeting dated 08.06.2010. On 04-Jul-2025, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r review of the said decision. It is quite evident that the firm has filed the present review application after the period UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

12 of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. It was further noted by the committee that in similar cases, PRC has earlier taken a decision to refer such cases to the concerned Norms Committee for examination & resolution, provided it is a first Review. As such, the committee, before taking a final decision in the matter, decided to refer this case to PRC to seek its opinion.

Case No. 16 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002445AM25 RA File Number 039404001169 AM15 Licence No and Date 0310795103/06/04/2015 .Case deferred for the comments of TE.

Case No. 17 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017 Case deferred for the comments of TE.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017 Case deferred for the comments of TE.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 18 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006805AM25 RA File Number 092404000336 AM20 Licence No and Date 0910068046/27/09/2019 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

SUBMIT COLOURED DRAWING OF THE EXPORT PRODUCT. 1. STAGE-WISE WASTAGE AT EACH STAGE OF OPERATION. 2. MILL TEST CERTIFICATE OF THE IMPORTED ITEM. 3. DESCRIPTION OF THE EXPORT PRODUCT IS Vague. Submit a COPY OF THE PURCHASE ORDER. WHY IS THE EXPORT PRODUCT CALLED AS BASE? 4.

Case No. 19 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006404AM25 RA File Number 052304000428 AM20 Licence No and Date 0510413578/11/02/2020 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (SKB) dated 09.03.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

KB) dated 09.03.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

14 HOT FINISHED (HFS) CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 63.5 mm OD X 7.11 mm THK.

QTY: 330748.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF HFSCARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 63.5 mm OD X 7.11 mm THK IN THE EXPORT PRODUCT. CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 300DN X 36MM THK, (323.8MM OD X 36MM THK)

QTY:10038.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 300DN X 36MM THK, (323.8MM OD X 36MM THK) 1 WATER WALL PANELS & HEADERS (PARTS OF WATER TUBE BOILER)

WEIGHT OF IMPORTED INPUT:360849.18 KGS

WEIGHT OF INDIGENOUS INPUT: 91489.10 KGS 452338.28 KGS CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 250DN X 34 MM THK., (273MM OD X 34MM THK.)

QTY: 27280.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 250DN X 34 MM THK., (273MM OD X 34MM THK.) HFS CARBON STEEL TUBES CONF. TO SPEC.SA 213 GRADE T22 IN SIZE 44.5 mm OD X 7.11 mm THK.

QTY: 7763.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OFHFS CARBON STEEL TUBES CONF.

X 34MM THK.) HFS CARBON STEEL TUBES CONF. TO SPEC.SA 213 GRADE T22 IN SIZE 44.5 mm OD X 7.11 mm THK.

QTY: 7763.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OFHFS CARBON STEEL TUBES CONF. TO SPEC.SA 213 GRADE T22 IN SIZE 44.5 mm OD X 7.11 mm THK. SUPER HEATER TUBES & HEADERS (PARTS OF WATER TUBE BOILER)

WEIGHT OF IMPORTED INPUT: 358079.41 KGS

WEIGHT OF HFS CARBON STEEL TUBES CONF. TO SPEC. 1.02 KGS/ KGS ON THE NET WEIGHT OF 2 364801.12 KGS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

15 SA 213 GRADE T91 IN SIZE 44.5 mm OD X 7.11 mm THK.

QTY: 310622.00 KGS HFS CARBON STEEL TUBES CONF. TO SPEC. SA 213 GRADE T91 IN SIZE 44.5 mm OD X 7.11 mm THK. ALLOY STEEL SEAMLESS PIPE CONFORMING TO SPECIFICATION SA-335 GR. P11 IN SIZE 12""NPS X SCH140, (323.8 MM O/D X 28.58 MM THK) QTY: 31534.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF ALLOY STEEL SEAMLESS PIPE CONFORMING TO SPECIFICATION SA-335 GR. P11 IN SIZE 12""NPS X SCH140, (323.8 MM O/D X 28.58 MM THK) INDIGENOUS INPUT: 6721.71 KGS ALLOY STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-335 GRADE P22 IN SIZE 350DN X 70MM THK, (355.6MM OD X 70MM THK) QTY: 15322.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF ALLOY STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-335 GRADE P22 IN SIZE 350DN X 70MM THK, (355.6MM OD X 70MM THK) HFS CARBON STEEL TUBES CONF. TO SPEC.

NET WEIGHT OF ALLOY STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-335 GRADE P22 IN SIZE 350DN X 70MM THK, (355.6MM OD X 70MM THK) HFS CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 44.5 mm OD X 7.11 mm THK.

QTY: 706991.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF HFS CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 44.5 mm OD X 7.11 mm THK. FORCED FLOW PANELS & HEADERS (PARTS OF WATER TUBE BOILER)

WEIGHT OF IMPORTED INPUT: 703879.25 KGS

WEIGHT OF INDIGENOUS CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 250DN 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO 3 723178.54 KGS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

16 INPUT: 40968.80 KGS X 34 MM THK. QTY: 10965.84 KGS SPECIFICATION SA-106 GRADE B IN SIZE 250DN X 34 MM THK. CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 57mm OD X 7.11mm THK.

QTY: 180228.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL TUBES CONF. TO SPEC.

ZE 250DN X 34 MM THK. CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 57mm OD X 7.11mm THK.

QTY: 180228.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL TUBES CONF. TO SPEC. SA 210 GRADE A1 IN SIZE 57mm OD X 7.11mm THK. 4 EVAPORATOR ASSEMBLY (PARTS OF WATER TUBE BOILER)

WEIGHT OF IMPORTED INPUT: 217932.35 KGS

WEIGHT OF INDIGENOUS INPUT: 11977.13 KGS 229909.48 KGS CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 350DN X 40MM THK, (355.6MM OD X 40MM THK)

QTY: 42063.00 KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF CARBON STEEL HOT FINISHED SEAMLESS PIPE CONFIRMING TO SPECIFICATION SA-106 GRADE B IN SIZE 350DN X 40MM THK, (355.6MM OD X 40MM THK)

NOTE: THE GRADES& SIZES OF IMPORTED PIPES&TUBES SHOULD BE MATCHED WITH THE GRADES& SIZES OF THE PIPES & TUBES OF THE EXPORT PRODUCT.

RA concerned may take suitable consequential action accordingly.

Case No. 20 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name AUSA MEDICAL DEVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004880AM26 RA File Number 072404000183 AM21 Licence No and Date 0710117089/05/10/2020 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00004880AM26 RA File Number 072404000183 AM21 Licence No and Date 0710117089/05/10/2020 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

17 The Committee considered the case as per agenda and noted from the comments of Consultant (Tech-1) dated 05.03.2026, that applicant has requested for deletion of the word breast biopsy devices imposed in export in meeting dated 04.02.2025 since exports have already been completed before 04.02.2025. This condition was imposed in export because export in the license was given in trade name as per DL reply given by the applicant. The Committee, after deliberating upon the case, decided that the concerned RA may check from shipping bill the export date at the time of redemption and may not insist on the description as imposed ( breast biopsy devices) in the minutes if exports have taken place before 04.02.2025.

Case No. 21 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004881AM26 RA File Number 072404000184 AM21 Licence No and Date 0710117090/05/10/2020

Case No. 22 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date 0710117090/05/10/2020

Case No. 22 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

18 and Date HQ File Number HQRNORM REVIW00004882AM26 RA File Number 072404000182 AM21 Licence No and Date 0710117092/05/10/2020

Case No. 23 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004938AM26 RA File Number 072404000186 AM21 Licence No and Date 0710117091/05/10/2020

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 24 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004937AM26 RA File Number 072404000185 AM21 Licence No and Date 0710117104/06/10/2020

Case No. 25 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number 018005000676AM21 RA File Number 092404000391 AM21 Licence No and Date 0910069340/19/10/2020 comments of Consultant (SKB) dated 10.03.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY TO BE ALLOWED UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

B) dated 10.03.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY TO BE ALLOWED UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

20 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2875.35 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 661 NOS STAINLESS STEEL BARS (GTD 450, SIZE:
100 RCS)

QTY: 11237.00 KGS 6676.56KGS INCLUSIVE OF 132.20% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 26 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005049AM25 RA File Number 092404000334 AM21 Licence No and Date 0910069412/29/10/2020

Case No. 27 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name SENIOR FLEXONICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003083AM26 RA File Number 052404000442 AM21 Licence No and 0510415984/25/11/2020 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

er and Date HQ File Number HQRNORM REVIW00003083AM26 RA File Number 052404000442 AM21 Licence No and 0510415984/25/11/2020 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

21 Date comments of Consultant (Tech-3) dated 09.03.2026, as under:

EP- Add " wt. 2.9 kg./unit containing 75 no. imported tubes wt. 694 gms." Import 1- Net to net as per GN4 . Add. "wt. 13880 kg." 2- As applied .Value restricted to 5 % of fob value

Note:-Grade and size of imported tubes will be same as used in EP. Tubes will be imported in finished form.

Case No. 28 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006203AM25 RA File Number 04AA04004698 AM21 Licence No and Date 0411000077/23/12/2020

Case No. 29 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

411000077/23/12/2020

Case No. 29 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

22 HQ File Number HQRNORM REVIW00005413AM25 RA File Number 09AA04005664 AM21 Licence No and Date 0911000495/11/03/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2230.60 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 1174 NOS STAINLESS STEEL BARS, (GRADE 10705 SIZE: 67X156, 73X125, 58X130, 75X130, 66X120, 66X112, 48X200, 48X181, 60X198, 59X189, 47X181, 45X170, 45X163 MM) QTY: 25828.00 KGS 15421.48 KGS INCLUSIVE OF 591.36% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 30 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005416AM25 RA File Number 09AA04005657 AM21 Licence No and 0911000496/11/03/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

er and Date HQ File Number HQRNORM REVIW00005416AM25 RA File Number 09AA04005657 AM21 Licence No and 0911000496/11/03/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

23 Date

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2185.92 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

3168 NOS STAINLESS STEEL BARS, (GRADE 10705 SIZE: 54X112, 48X116, 43X109, 40X96, 48X72, 56X104, 48X97, 48X92, 47X87, 42X167, 40X154, 36X283, 36X116, 45X80, 45X155, 35X147, 33X140, 33X265, 29X245 MM) QTY: 25344.00 KGS 15133.60 KGS INCLUSIVE OF 592.32% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 31 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021 The Committee considered the case as per agenda and noted that in this case DL has to be issued as UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

te 0511001740/15/03/2021 The Committee considered the case as per agenda and noted that in this case DL has to be issued as UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

24 per decision taken in NC-1 meeting dated 24.02.2026, the minutes of which are under submission. Hence, the Committee decided to defer the case.

Case No. 32 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name SENIOR FLEXONICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002734AM26 RA File Number 05AA04040842 AM21 Licence No and Date 0511001835/19/03/2021 comments of Consultant (Tech-3) dated 09.03.2026, as under:

EP- Add " wt. 2.9 kg./unit containing 75 no. imported tubes wt. 694 gms." Import 1- Net to net as per GN4 . Add. "wt. 13880 kg." 2- As applied .Value restricted to 5 % of fob value

Note:-Grade and size of imported tubes will be same as used in EP. Tubes will be imported in finished form.

Case No. 33 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

. Tubes will be imported in finished form.

Case No. 33 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

25 Meeting Number and Date HQ File Number HQRNORM REVIW00005415AM25 RA File Number 09AA04006679 AM21 Licence No and Date 0911000623/27/03/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2964.08 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

3752 NOS STAINLESS STEEL BARS (CB 403- DIA 85 )

QTY: 15008 KGS 8925.73 KGS INCLUSIVE OF 201.13% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 34 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005414AM25 RA File Number 09AA04006690 AM21 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005414AM25 RA File Number 09AA04006690 AM21 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

26 Licence No and Date 0911000625/29/03/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME - BODY, VALVE- 63001264)(NET CONTENT OF IMPORT ITEM SHALL BE 1,120.00 KG. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 400 NOS BODY, VALVE, 63001264 (NICKEL CASTING)

QTY: 2500.00 KGS 2249.15KGS INCLUSIVE OF 100.82% ON THE NET WEIGHT OF THE IMPORTED NICKEL CASTINGS OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED NICKEL CASTINGS SHOULD BE MATCHED WITH THE GRADE OF NICKEL CASTINGS OF THE EXPORT PRODUCT.

Case No. 35 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005411AM25 RA File Number 09AA04001468 AM22 Licence No and Date 0911000721/26/04/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00005411AM25 RA File Number 09AA04001468 AM22 Licence No and Date 0911000721/26/04/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADE, NET CONTENT OF IMPORT ITEM SHALL BE 2205.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES

1470 NOS STAINLESS STEEL BARS, (CB 403- 44X72, 52X72, 55X87, 62X128 MM)

QTY: 23520.00 KGS 14015.64 KGS INCLUSIVE OF 535.63% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEELSHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEELOF THE EXPORT PRODUCT.

Case No. 36 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005412AM25 RA File Number 09AA04000955 AM22 Licence No and Date 0911000722/26/04/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM REVIW00005412AM25 RA File Number 09AA04000955 AM22 Licence No and Date 0911000722/26/04/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

28 SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY TO BE ALLOWED 1 TURBINE PBLADE THE NET CONTENT OF THE IMPORT ITEM SHALL BE 2205.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 1470 NOS STAINLESS STEEL BARS, (CB 403- 44X72, 52X72, 55X87, 62X128 MM)

QTY: 23520.00 KGS

14015.64 KGS INCLUSIVE OF 535.63% OF THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 37 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005252AM26 RA File Number 07AA04002713 AM22 Licence No and Date 0711001033/05/05/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00005252AM26 RA File Number 07AA04002713 AM22 Licence No and Date 0711001033/05/05/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 38 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004866AM26 RA File Number 05AA04018188 AM22 Licence No and Date 0511002839/27/05/2021 comments of DPIIT dated 09.03.2026, as under:

Net fabricated weight of export items at SI.No. 1 to 4 may be specified as 163 MT , 162 MT , 16 MT & 13 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 105197 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.1 . 2. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 30840 Kgs as 1.0494 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 3. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 2730 Kgs as 1.0496 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 4. Import item at Sl.No.4 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1716 Kgs as 1.0495 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 5.

ade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1716 Kgs as 1.0495 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 5. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 10598 Kgs as 1.0476 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 6. Quantity of import item at Sl.No.6 may be allowed as 18 Nos. on net to net basis. However, duty free weight of this item may be allowed as 18272 Kgs inclusive of 1.52 % wastage as claimed by the firm. 7. Quantity of import item at Sl.No.7 may be allowed as 5 Nos. on net to net basis. However, duty free weight of this item may be allowed as 881 Kgs inclusive of 1.78 % wastage as claimed by the firm. 8. Import item at Sl.No.8 shall be of relevant grade and diameter as contained/utilized in the export item 9. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

y the firm. 8. Import item at Sl.No.8 shall be of relevant grade and diameter as contained/utilized in the export item 9. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

30 at SI.No.1 and its quantity may be allowed as 152 Kgs as 1.01 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. Import items at SI.No. 9 to 12 may be omitted as not imported by the firm. 10. Quantity of import items at Sl.No.13, 15 to 17 ( Welding Consumables) may be allowed as 900 Kgs. 3000 Kgs, 3000 Kgs & 2513 Kgs. respectively. 11. Import item at SI.No. 14 may be omitted as not imported by the firm. 12.

Import item at Sl.No.18 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 108,236 Kgs as 1.05 Kgs./Kg. content in the export item at SI.No.2 . 13. Import item at Sl.No.19 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 30030 Kgs as 1.0434 Kgs./Kg. content in the export item at SI.No.2 as claimed by the firm. 14. Import item at Sl.No.20 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 2700 Kgs as 1.048 Kgs./Kg. content in the export item at SI.No.2 . 15. Import item at Sl.No.21 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 888 Kgs as 1.0469 Kgs./Kg.

SI.No.2 . 15. Import item at Sl.No.21 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 888 Kgs as 1.0469 Kgs./Kg. content in the export item at SI.No.2 as claimed by the firm. 16. Import item at Sl.No.22 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 11600 Kgs as 1.0432 Kgs./Kg. content in the export item. 17. Quantity of import item at Sl.No.23 may be allowed as 5 Nos. on net to net basis. However, duty free weight of this item may be allowed as 15480 Kgs inclusive of 1.96 % wastage as claimed by the firm. 18. Quantity of import item at Sl.No.24 may be allowed as 2 Nos. on net to net basis. However, duty free weight of this item may be allowed as 415 Kgs inclusive of 1.22 % wastage as claimed by the firm. 19. Import item at Sl.No.25 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 232 Kgs as 1.01 Kgs/Kg content in the export item at SI.No.2 as claimed by the firm. 20. Import items at SI.No. 26 to 29 may be omitted as not imported by the firm. 21. Quantity of import items at Sl.No. 30, 32 &33 ( Welding Consumables) may be allowed as 900 Kgs. 2400 Kgs & 3000 Kgs. respectively. 22. Import item sat SI.No. 31 &34 may be omitted . 23.

Quantity of import items at Sl.No. 30, 32 &33 ( Welding Consumables) may be allowed as 900 Kgs. 2400 Kgs & 3000 Kgs. respectively. 22. Import item sat SI.No. 31 &34 may be omitted . 23. Import item at Sl.No.35 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e 4000 Kgs inclusive of 3.64 % wastage as claimed by the firm. 24. Import item at Sl.No.36 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e 4800 Kgs inclusive of 1.93 %
wastage as claimed by the firm. 25. Quantity of import item at Sl.No.37 may be allowed as 10 Nos. on net to net basis. However, duty free weight of this item may be allowed as 2698 Kgs inclusive of 4.98 % wastage as claimed by the firm. 26. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

wever, duty free weight of this item may be allowed as 2698 Kgs inclusive of 4.98 % wastage as claimed by the firm. 26. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

31 Import items at SI.No. 38 to 43 may be omitted as not imported by the firm. 27. Quantity of import items at Sl.No.44 &45 (Welding Consumables) may be allowed as Nil & 35 Kgs.respectively 28. Import item at Sl.No.46 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 2261 Kgs as 1.0305 Kgs/Kg content in the export item at SI.No.4 as claimed by the firm. 29. Import item at Sl.No.47shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 3800 Kgs.(4200 Meters) inclusive of 2 % wastage as claimed by the firm. 30. Quantity of import item at Sl.No.48 may be allowed as 8 Nos. on net to net basis. However, duty free weight of this item may be allowed as 2098 Kgs inclusive of 4.95 % wastage as claimed by the firm. 31. Import items at SI.No. 49 to 53 may be omitted as not imported by the firm. 32. Quantity of import item at Sl.No.54 ( Welding Consumables) may be allowed as applied for i.e 35 Kgs. 33.

Import items at SI.No. 49 to 53 may be omitted as not imported by the firm. 32. Quantity of import item at Sl.No.54 ( Welding Consumables) may be allowed as applied for i.e 35 Kgs. 33.

Case No. 39 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005053AM25 RA File Number 09AA04002060 AM22 Licence No and Date 0911001045/15/06/2021

Case No. 40 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004291AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

32 RA File Number 05AA04018650 AM22 Licence No and Date 0511003189/17/06/2021

Case No. 41 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006411AM25 RA File Number 05AA04057692 AM22 Licence No and Date 0511003764/22/07/2021

Case No. 42 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005221AM26 RA File Number 07AA04011575 AM22 Licence No and Date 0711001558/27/07/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM REVIW00005221AM26 RA File Number 07AA04011575 AM22 Licence No and Date 0711001558/27/07/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 43 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006130AM26 RA File Number 05AA04068540 AM22 Licence No and Date 0511004108/12/08/2021 Net fabricated weight of export items at SI.No.1 to 5 may be specified as 286 MT, 340 MT, 127 MT , 248 MT & 248 MT respectively. 1. item at SI.No.1 and its quantity may be allowed as 239949 Kgs as 1.05 Kgs/Kg content in the export item. 2. Quantity of import item at Sl.No.2 may be allowed as 18 Nos. on net to net basis in export item at Sl.No. 1. However, duty free weight of this item may be allowed as 15915 Kgs inclusive of 1.52 % wastage as claimed by the firm. 3. Quantity of import item at Sl.No.3 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 250 Kgs inclusive of 1 % wastage as claimed by the firm. 4. Quantity of import item at Sl.No.4 may be allowed as 5 Nos. on net to net basis. However, duty free weight of this item may be allowed as 2538 Kgs inclusive of 0.90 % wastage as claimed by the firm. 5. Quantity of import item at Sl.No.5 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 3495 Kgs inclusive of 1.16 % wastage as claimed by the firm. 6. Import item at SI.No.

No.5 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 3495 Kgs inclusive of 1.16 % wastage as claimed by the firm. 6. Import item at SI.No. 6 may be omitted as not imported by the firm. 7. Import item at Sl.No.7 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 30851 Kgs as 1.05 Kgs/Kg content in the export item . 8. Import items at SI.No. 8 &9 may be omitted as not imported by the firm. 9. Quantity of import items at Sl.No.10 to 16 ( Welding Consumables) may be allowed as 1700 Kgs., 11700 Kgs., 11700 Kgs., 150 Kgs., 2350 Kgs., 200 Kgs & 200 Kgs respectively. 10. Import item at Sl.No.17 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 297339 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 11. Quantity of import item at Sl.No.18 may be allowed as 18 Nos. on net to net basis. However, duty 12. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

by the firm. 11. Quantity of import item at Sl.No.18 may be allowed as 18 Nos. on net to net basis. However, duty 12. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

34 free weight of this item may be allowed as 13529 Kgs inclusive of 1.52 % wastage as claimed by the firm. Quantity of import item at Sl.No.19 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 99 Kgs. inclusive of 1.52 % wastage as claimed by the firm. 13. Quantity of import item at Sl.No.20 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 2142 Kgs inclusive of 1.52 % wastage as claimed by the firm. 14. Quantity of import item at Sl.No.21 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 3685 Kgs inclusive of 1.10 % wastage as claimed by the firm. 15. Import item at Sl.No.22 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 1998 Kgs inclusive of 0.48 % wastage as claimed by the firm. 16. Import item at Sl.No.23 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 20721 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 17. Import items at SI.No. 24 & 25 may be omitted as not imported by the firm. 18.

its quantity may be allowed as 20721 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 17. Import items at SI.No. 24 & 25 may be omitted as not imported by the firm. 18. Quantity of import items at Sl.No.26 to 32 ( Welding Consumables) may be allowed as 7700 Kgs., 11700 Kgs., 11700 Kgs., 150 Kgs., 2650 Kgs., 200 Kgs & 200 Kgs respectively. 19. Import item at Sl.No. 33 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 117037 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 20. Quantity of import item at Sl.No.34 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 1550 Kgs inclusive of 0.98% wastage as claimed by the firm. 21. Import items at SI.No. 35 & 36 may be omitted as not imported by the firm. 22. Quantity of import items at Sl.No.37 to 42 ( Welding Consumables) may be allowed as 2350 Kgs., 2350 Kgs., 50 Kgs., 1200 Kgs., 525 Kgs., & 525 Kgs respectively. 23. Import item at Sl.No. 43 shall be of relevant grade and thickness as contained/utilized in the export items at SI.No.4 & 5 and its quantity may be allowed as 231,733 Kgs as 1.0475 Kgs/Kg content in the export items at SI.No. 4 & 5 as claimed by the firm. 24. Quantity of import item at Sl.No.44 may be allowed as 14 Nos. on net to net basis. However, duty free weight of this item may be allowed as 1045 Kgs inclusive of 1.52 % wastage as claimed by the firm. 25.

f import item at Sl.No.44 may be allowed as 14 Nos. on net to net basis. However, duty free weight of this item may be allowed as 1045 Kgs inclusive of 1.52 % wastage as claimed by the firm. 25. Quantity of import item at Sl.No.45 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 70 Kgs inclusive of 3.70 % wastage as claimed by the firm. 26. Quantity of import item at Sl.No.46 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as applied for i.e 2700 Kgs inclusive of 1.50 % wastage as claimed by the firm 27. Quantity of import item at Sl.No.47 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 3172 Kgs inclusive of 1.52 % wastage as claimed by the firm. 28. Import item at Sl.No.48 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 1991 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 29. Import item at Sl.No.49 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 19492 Kgs as 1.035 Kgs/Kg content in the export item as claimed by the firm. 30. Import items at SI.No. 50 & 51 may be omitted as not imported by the firm. 31. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

xport item as claimed by the firm. 30. Import items at SI.No. 50 & 51 may be omitted as not imported by the firm. 31. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

35 Quantity of import items at Sl.No.52 to 57 ( Welding Consumables) may be allowed as 6050 Kgs., 6050 Kgs., 100 Kgs., 2600 Kgs., 420 Kgs., & 420 Kgs respectively. 32. Import item at Sl.No.58 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 179279 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 33. Quantity of import item at Sl.No.59 may be allowed as 16 Nos. on net to net basis. However, duty free weight of this item may be allowed as 11045 Kgs inclusive of 1.52 % wastage as claimed by the firm.. 34. Quantity of import item at Sl.No.60 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as 70 Kgs inclusive of 3.70 % wastage as claimed by the firm. 35. Quantity of import item at Sl.No.61 may be allowed as 1 No. on net to net basis. However, duty free weight of this item may be allowed as applied for i.e 2700 Kgs inclusive of 1.52 % wastage . 36. Quantity of import item at Sl.No.62 may be allowed as 18 Nos. on net to net basis. However, duty free weight of this item may be allowed as 3172 Kgs inclusive of 1.52 % wastage as claimed by the firm. 37. Import item at Sl.No.

may be allowed as 18 Nos. on net to net basis. However, duty free weight of this item may be allowed as 3172 Kgs inclusive of 1.52 % wastage as claimed by the firm. 37. Import item at Sl.No. 63 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 1991 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 38. Import item at Sl.No. 64 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 6280 Kgs as 1.047 Kgs/Kg content in the export item as claimed by the firm. 39. Import items at SI.No. 65 & 66 may be omitted as not imported by the firm. 40. Quantity of import items at Sl.No. 67 to 72 ( Welding Consumables) may be allowed as 6050 Kgs., 6050 Kgs., 100 Kgs., 2600 Kgs., 420 Kgs., & 420 Kgs respectively. 41.

Case No. 44 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004292AM26 RA File Number 05AA04088615 AM22 Licence No and Date 0511005308/08/10/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM REVIW00004292AM26 RA File Number 05AA04088615 AM22 Licence No and Date 0511005308/08/10/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 45 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005056AM25 RA File Number 09AA04016233 AM22 Licence No and Date 0911001743/22/10/2021

Case No. 46 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005051AM25 RA File Number 09AA04017807 AM22 Licence No and Date 0911001893/22/11/2021 .Case deferred for the comments of TE.

Case No. 47 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004588AM26 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM REVIW00004588AM26 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 48 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005062AM26 RA File Number 07AX04000142 AM22 Licence No and Date 0711002750/30/12/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ate HQ File Number HQRNORM REVIW00005062AM26 RA File Number 07AX04000142 AM22 Licence No and Date 0711002750/30/12/2021

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 49 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005061AM26 RA File Number 07AX04000192 AM22 Licence No and Date 0711002858/11/01/2022

Case No. 50 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006198AM25 RA File Number 04AX04000097 AM22 Licence No and Date 0411002478/25/01/2022

Case No. 51 / NC/1/MEET/Feb/202526/17 Case Status Case Approved UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

39 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005223AM26 RA File Number 07AX04000377 AM22 Licence No and Date 0711003223/14/02/2022

Case No. 52 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005232AM26 RA File Number 07AX04000407 AM22 Licence No and Date 0711003293/23/02/2022

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM REVIW00005232AM26 RA File Number 07AX04000407 AM22 Licence No and Date 0711003293/23/02/2022

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 53 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006412AM25 RA File Number 05AX04001153 AM22 Licence No and Date 0511010598/02/03/2022

Case No. 54 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005397AM25 RA File Number 09AX04000240 AM22 Licence No and Date 0911002604/03/03/2022

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED PRECISION COMPONENTS FOR AIRCRAFT (THE NET CONTENT OF THE IMPORT ITEM ALUMINIUM BAR& TUBES (GRADE: 2024, 2014 7075, 6061, 6060, 6063, AMS 4117, AMS 4120, AMS 4121, AMS 4027, AMS 4124, AMS 10184.19 KG INCLUSIVE OF 72.65% WASTAGE ON THE NET WEIGHT OF THE IMPORTED 1 82500 NOS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

, AMS 4027, AMS 4124, AMS 10184.19 KG INCLUSIVE OF 72.65% WASTAGE ON THE NET WEIGHT OF THE IMPORTED 1 82500 NOS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

41 SHALL BE 5898.75 K.G., WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 4133, AMS 4339, AMS QQA-225, QQ-A-200)

QTY: 10725.00 KGS ALUMINIUM BARS & TUBES OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED ALUMINIUM BARS & TUBES SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM OF THE EXPORT PRODUCT.

Case No. 55 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006199AM25 RA File Number 04AX04000084 AM23 Licence No and Date 0411003261/09/05/2022 Case deferred for the DL reply of the firm.

Case No. 56 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006399AM25 RA File Number 33AX04000080 AM23 Licence No and Date 0511016230/07/12/2022 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

and Date HQ File Number HQRNORM REVIW00006399AM25 RA File Number 33AX04000080 AM23 Licence No and Date 0511016230/07/12/2022 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

42 comments of Consultant (SKB) dated 10.03.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3

QTY: 100469.88 KGS 1.02KGS/ KGS ON THE NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 14268.00KGS 1.02 KGS/ KGS ON THE NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3IN THE EXPORT PRODUCT. 1 FURNACE (PARTS OF WATER TUBE BOILER) WEIGHT OF IMPORTED INPUT: 121172.431 KGS WEIGHT OF INDIGENOUS INPUT: 6264.568 KGS 1 SET(127436.994 KGS) ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 8858.00KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 31072.12 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 5442.00 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT. 2 SUPERHEATER (PARTS OF WATER TUBE BOILER) WEIGHT OF IMPORTED INPUT:
69182.471 KGS WEIGHT OF INDIGENOUS INPUT:
2067.529

/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT. 2 SUPERHEATER (PARTS OF WATER TUBE BOILER) WEIGHT OF IMPORTED INPUT:
69182.471 KGS WEIGHT OF INDIGENOUS INPUT:
2067.529 KGS 1 SET( 71250.00 KGS) UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

43 ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 13CrMo4-5 QTY: 18063.00 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 13CrMo4- 5 IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 13CrMo4-5

QTY: 2771.00KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 13CrMo4- 5 IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 10CrMo9-10 QTY: 12258.00 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 10CrMo9- 10 IN THE EXPORT PRODUCT. ALLOY STEEL PLATE CONF TO SPECN 13CrMo4-5 QTY: 2310.00 KGS NET WEIGHT OF ALLOY STEEL PLATE CONF TO SPECN 13CrMo4-5 IN THE EXPORT PRODUCT. CARBON STEELTUBES/PIPES CONFORMING TO SPECIFICATION P235GH

QTY: 81035.00 KGS NET WEIGHT OF CARBON STEELTUBES/PIPES CONFORMING TO SPECIFICATION P235GH IN THE EXPORT PRODUCT. ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 NET WEIGHT OF THE ALLOY STEEL TUBES/PIPES 3 ECONOMISER (PARTS OF WATER TUBE BOILER) WEIGHT OF IMPORTED INPUT:
82020.558 KGS

WEIGHT OF INDIGENOUS INPUT:
31060.412 KGS 1 SET (113081.00 KGS) UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ILER) WEIGHT OF IMPORTED INPUT:
82020.558 KGS

WEIGHT OF INDIGENOUS INPUT:
31060.412 KGS 1 SET (113081.00 KGS) UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

44 QTY: 2626.00KGS CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 29800.00KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3IN THE EXPORT PRODUCT 4 EVAPORATOR TUBE BUNDLE (PARTS OF WATER TUBE BOILER) WEIGHT OF IMPORTED INPUT:
30677.451 KGS WEIGHT OF INDIGENOUS INPUT: 2822.549 KGS 1 SET( 33500.00 KGS) ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 QTY: 1491.00 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3

QTY: 466.87 KGS NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3 IN THE EXPORT PRODUCT

5 CONVECTION CAGE (PARTS OF WATER TUBE BOILER)

WEIGHT OF IMPORTED INPUT:
606.865 KGS WEIGHT OF INDIGENOUS INPUT: 3193.135 KGS 1 SET(3800.00 KGS) ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3

QTY: 152.132 KGS

NET WEIGHT OF ALLOY STEEL TUBES/PIPES CONFORMING TO SPECIFICATION 16Mo3IN THE EXPORT PRODUCT

NOTE: THE GRADES & SIZES OF IMPORTED PIPES & TUBES SHOULD BE MATCHED WITH THE GRADES & SIZES OF THE PIPES & TUBES OF THE EXPORT PRODUCT.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

S & SIZES OF IMPORTED PIPES & TUBES SHOULD BE MATCHED WITH THE GRADES & SIZES OF THE PIPES & TUBES OF THE EXPORT PRODUCT.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 57 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006414AM25 RA File Number 05AX04003397 AM23 Licence No and Date 0511017635/06/03/2023 comments of DPIIT dated 19.02.2026, as under:

Net Fabricated weight of export item may be specified as 842 MT.
1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 6,43,755 Kgs as 1.0455 Kgs./Kg. content in the export item as claimed by the firm. 2. Quantity of import item at Sl.No.2 may be allowed as 39,605 Kg.( 5 Nos.) on net to net basis in the export item. 3. Import items at SI.No. 3 to 6 may be omitted as not imported by the firm. 4. Import item at Sl.No.7 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 4835 Kgs as 1.022 Kgs./Kg. content in the export item as 5. Import items at SI.No. 8 to 10 may be omitted as not imported by the firm. 6. Quantity of import item at Sl.No.11 may be allowed as 6 Kg.( 100 Nos.) on net to net basis. 7. Import items at SI.No. 12 to 17 may be omitted as not imported by the firm. 8.

ed by the firm. 6. Quantity of import item at Sl.No.11 may be allowed as 6 Kg.( 100 Nos.) on net to net basis. 7. Import items at SI.No. 12 to 17 may be omitted as not imported by the firm. 8. Import item at Sl.No.18 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 5839 Kgs as 1.016 Kgs./Kg. content in the export item as 9. Import item at Sl.No.19 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 2779 Kgs as 1.02 Kgs./Kg. content in the export item as 10. Import item at Sl.No.20 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 1,22,793 Kgs as 1.033 Kgs./Kg. content in the export item as claimed by the firm. 11. Quantity of import item at Sl.No.21 may be allowed as 6422 Kg.( 4 Sets.) on net to net basis in the export item. 12. Quantity of import item at Sl.No.22 may be allowed as 15 Nos. (12 Kg.) on net to net basis in the export item. 13. Quantity of import item at Sl.No.23 may be allowed as 26 Nos.(12 Kg.) on net to net basis in the 14. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

export item. 13. Quantity of import item at Sl.No.23 may be allowed as 26 Nos.(12 Kg.) on net to net basis in the 14. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

46 export item. Quantity of import item at Sl.No.24 may be allowed as 9 Sets ( 6 Kgs. ) on net to net basis in the export item. 15. Quantity of import item at Sl.No.25 may be allowed as 55 Sets.( 36 Kgs. ) on net to net basis in the export item. 16. Import items at SI.No. 26 to 29 may be omitted as not imported by the firm. 17. Quantity of import items at Sl.No.30 to 33(Welding Consumables) may be allowed as 5080 Kgs., 6650 Kgs., 10500 Kgs., & 355 Kgs. respectively. 18. Import items at SI.No. 34 to 37 may be omitted as not imported by the firm. 19.

Case No. 58 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005672AM26 RA File Number 05AX04000241 AM24 Licence No and Date 0511018607/01/05/2023

Case No. 59 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004188AM26 RA File Number 05AX04000989 AM24 Licence No and Date 0511020481/18/08/2023 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00004188AM26 RA File Number 05AX04000989 AM24 Licence No and Date 0511020481/18/08/2023 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Net fabricated weight of export items at SI.No.1 & 2 may be specified as 81.2 MT & 133 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 69,574 Kgs as 1.0473 Kgs./Kg. content in the export item at SI.No.1 as claimed by the firm. 2. Import items at SI.No. 2 to 13 may be omitted as not imported by the firm. 3. Import item at Sl.No.14 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 6482 Kgs as 1.0483 Kgs./Kg. content in the export item at SI.No.2 as claimed by the firm. 4. Import items at SI.No. 15 to 24 may be omitted as not imported by the firm. 5.

Case No. 60 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005665AM26 RA File Number 05AX04001397 AM24 Licence No and Date 0511020553/23/08/2023

Case No. 61 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006415AM25 RA File Number 05AX04001467 AM24 Licence No and 0511020579/24/08/2023 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

er and Date HQ File Number HQRNORM REVIW00006415AM25 RA File Number 05AX04001467 AM24 Licence No and 0511020579/24/08/2023 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

48 Date

Case No. 62 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006417AM25 RA File Number 05AX04001571 AM24 Licence No and Date 0511020786/05/09/2023

Case No. 63 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006200AM25 RA File Number 04AX04000494 AM24 Licence No and Date 0411006009/14/09/2023 Case deferred for the DL reply of the firm.

Case No. 64 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

49 HQ File Number HQRNORM REVIW00006201AM25 RA File Number 04AX04000490 AM24 Licence No and Date 0411006023/15/09/2023 Case deferred for the DL reply of the firm.

Case No. 65 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005373AM25 RA File Number 09AX04000639 AM24 Licence No and Date 0911006028/18/10/2023 .

Submit quantity and finish weight of each aircraft component to be manufactured from imported aluminium castings and bars. 1. Coloured drawing of the Precision Components, which indicates the weight of raw material and the finished product. 2.

aft component to be manufactured from imported aluminium castings and bars. 1. Coloured drawing of the Precision Components, which indicates the weight of raw material and the finished product. 2. Size and shape of the Aluminium Casting and Aluminium Bars. 3. Test Mill Certificate of the grade and chemical composition of the imported Aluminium castings and Aluminium Bars. 4. Starting from the specification of the export product, basic calculation as to how the raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing, with complete justification, which documentary evidence/drawings, etc should support. 5.

Case No. 66 / NC/1/MEET/Feb/202526/17 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

50 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004305AM26 RA File Number 05AX04002773 AM24 Licence No and Date 0511022504/06/12/2023

Net fabricated weight of export item may be specified as 170.4 MT.
1. item and its quantity may be allowed as 134961 Kgs as 1.0463 Kgs/Kg content in the export item as 2. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 2368 Kgs as 1.0432 Kgs/Kg content in the export item as 3.

ort item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 2368 Kgs as 1.0432 Kgs/Kg content in the export item as 3. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 1412 Kgs as 1.0430 Kgs/Kg content in the export item as 4. Import items at SI.No. 4 & 5 may be omitted as not imported by the firm. 5. Quantity of import item at Sl.No.6 may be allowed as 2 Nos. on net to net basis. However, duty free weight of this item may be allowed as 185 Kgs as inclusive of 1 % wastage as claimed by the firm. 6. Import item at SI.No. 7 may be omitted as not imported by the firm. 7. Quantity of import item at Sl.No.8 may be allowed as 5276 Kgs. as 1.05 Kgs./Kg. content in the export item 8. Quantity of import items at Sl.No.9 & 10 ( Welding Consumables) may be allowed as applied for i.e. 525 Kgs & 157.50 Kgs. respectively. 9.

Case No. 67 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005364AM25 RA File Number 09AX04000934 AM24 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005364AM25 RA File Number 09AX04000934 AM24 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

51 Licence No and Date 0911006580/12/01/2024

Case No. 68 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005362AM25 RA File Number 09AX04001142 AM24 Licence No and Date 0911007017/02/04/2024

WHAT IS THE GENERIC NAME OF THE AIRCRAFT COMPONENTS?
SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE.
COLOURED DRAWINGS OF THE AIRCRAFT COMPONENTS WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS.
MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS.
ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER.

Case No. 69 / NC/1/MEET/Feb/202526/17 Case Status Case Approved UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

E DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER.

Case No. 69 / NC/1/MEET/Feb/202526/17 Case Status Case Approved UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

52 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004804AM26 RA File Number 05AX04000326 AM25 Licence No and Date 0511025424/10/05/2024 Net fabricated weight of export items at SI.No.1 & 2 may be specified as 520 MT & 260 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and diameter as contained/utilized in the export item at Sl. No. 1 and its quantity may be allowed as 348311 Kgs as 1.0407 Kgs/Kg content in the export item as claimed by the firm. 2. Quantity of import item at Sl.No.2 may be allowed as 3 Nos. on net to net basis. However, duty free weight of this item may be allowed as 29,955 Kgs inclusive of 0.54 % wastage as claimed by the firm. 3. Quantity of import item at Sl.No.3 may be allowed as 2 Nos. on net to net basis. However, duty free weight of this item may be allowed as 834 Kgs inclusive of 0.91 % wastage as claimed by the firm. 4. Import items at SI.No. 4 & 5 may be omitted as not imported by the firm. 5. Import item at Sl.No.6 shall be of relevant grade and diameter as contained/utilized in the export item at Sl. No. 1 and its quantity may be allowed as 436 Kgs as 1.012 Kgs/Kg content in the export item as claimed by the firm. 6. Import items at SI.No. 7 to 11 may be omitted as not imported by the firm. 7.

and its quantity may be allowed as 436 Kgs as 1.012 Kgs/Kg content in the export item as claimed by the firm. 6. Import items at SI.No. 7 to 11 may be omitted as not imported by the firm. 7. Import item at Sl.No.12 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 5430 Kgs as 1.018 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 8. Import items at SI.No. 13 & 14 may be omitted as not imported by the firm. 9. Import item at Sl.No.15 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 2335 Kgs as 1.018 Kgs/Kg content in the export item as claimed by the firm. 10. Import item at SI.No. 16 may be omitted as not imported by the firm. 11. Import item at Sl.No.17 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 60624 Kgs as 1.021 Kgs/Kg content in the export item as claimed by the firm. 12. Quantity of import item at Sl.No.18 may be allowed as 4 Sets ( 4121 Kgs. ) on net to net basis in the export item at SI.No.1 13. Quantity of import items at Sl.No.19 to 22 may be allowed on net to net basis with accountability clause. 14. Import items atSI.No. 23 to 26 may be omitted as not imported by the firm. 15. Quantity of import items at Sl.No.27 to 31 ( Welding Consumables) may be allowed as 4500 Kgs., 5825 Kgs., 5655 Kgs., 10 Kgs., & 90 Kgs. respectively. 16. Import items atSI.No.

by the firm. 15. Quantity of import items at Sl.No.27 to 31 ( Welding Consumables) may be allowed as 4500 Kgs., 5825 Kgs., 5655 Kgs., 10 Kgs., & 90 Kgs. respectively. 16. Import items atSI.No. 32 to 36 may be omitted as not imported by the firm. 17. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

53 Import item at Sl.No.37 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 6522 Kgs as 1.0467 Kgs/Kg content in the export item as claimed by the firm. 18. Import item at Sl.No.38 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 118750 Kgs as 1.0465 Kgs/Kg content in the export item as claimed by the firm. 19. Import item at Sl.No.39 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 42043 Kgs as 1.02 Kgs/Kg content in the export item as claimed by the firm. 20. Import items atSI.No. 40 to 48 may be omitted as not imported by the firm. 21. Quantity of import items at Sl.No. 49 & 50 ( Welding Consumables) may be allowed as 455 Kgs & 1610 Kgs. respectively. 22. Import items at SI.No. 51 to 55 may be omitted as not imported by the firm. 23.

of import items at Sl.No. 49 & 50 ( Welding Consumables) may be allowed as 455 Kgs & 1610 Kgs. respectively. 22. Import items at SI.No. 51 to 55 may be omitted as not imported by the firm. 23.

Case No. 70 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000886AM25 RA File Number 09AX04000119 AM25 Licence No and Date 0911007293/24/05/2024

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED STAINLESS STEEL ROUND BARS, GRADE: B50A365B, SIZE-160 X 140

2231.74 KGS INCLUSIVE OF 110.90% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1,058.20 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 185 NOS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

54 QTY: 3737.00 KGS PRODUCT 2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1,018.40 KGS.

ND INVOICES) 185 NOS UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

54 QTY: 3737.00 KGS PRODUCT 2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1,018.40 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 670 NOS STAINLESS STEEL ROUND BARS, GRADE: B50A947, SIZE-140X100, 80X122, 68X103

QTY: 4221.00 KGS

2510.15 KGS INCLUSIVE OF 146.48% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 71 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001705AM26 RA File Number 09AX04000120 AM25 Licence No and Date 0911007306/27/05/2024

WHAT IS THE GENERIC NAME OF THE AIRCRAFT COMPONENTS?
PLEASE INDICATE THE FORM OF THE ITEM OF IMPORT AT SL No 4.
SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)
SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

55 (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE.

COLOURED DRAWINGS OF THE AIRCRAFT COMPONENTS WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS.
MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS.
ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER.

Case No. 72 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004748AM26 RA File Number 05AX04000675 AM25 Licence No and Date 0511026051/12/06/2024

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 73 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006419AM25 RA File Number 05AX04000772 AM25 Licence No and Date 0511026073/12/06/2024

Case No. 74 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name SENIOR FLEXONICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003082AM26 RA File Number 05AX04000612 AM25 Licence No and Date 0511026090/13/06/2024 comments of Consultant (Tech-3) dated 09.03.2026, as under:

EP- Add " wt. .522 kg./unit " Import 1. 10650 kg. including 1% wastage 2. 10900 kg.

Licence No and Date 0511026090/13/06/2024 comments of Consultant (Tech-3) dated 09.03.2026, as under:

EP- Add " wt. .522 kg./unit " Import 1. 10650 kg. including 1% wastage 2. 10900 kg. including 1% wastage

Note:- Thickness & grade of imported strips will be same as used in EP.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 75 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006420AM25 RA File Number 05AX04000380 AM25 Licence No and Date 0511026299/25/06/2024

Case No. 76 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004794AM26 RA File Number 05AX04001238 AM25 Licence No and Date 0511026852/24/07/2024

Net fabricated weight of export item may be specified as 158 MT.
1. item and its quantity may be allowed as 138,188 Kgs as 1.0435 Kgs/Kg content in the export item as 2. Import item at SI.No.2 may be omitted as not imported by the firm. 3. Quantity of import item at Sl.No.3 may be allowed as 1 No.( 2502 Kgs.) on net to net basis. 4. Import items at SI.No. 4 & 5 may be omitted as not imported by the firm. 5. Quantity of import items at Sl.No.6 to 12 ( Welding Consumables) may be allowed as 1134 Kgs , 400 Kgs , 4303 Kgs , 4000 Kgs , 303 Kgs , 5925 Kgs & 5925 Kgs. respectively. 6.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

sumables) may be allowed as 1134 Kgs , 400 Kgs , 4303 Kgs , 4000 Kgs , 303 Kgs , 5925 Kgs & 5925 Kgs. respectively. 6.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 77 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004189AM26 RA File Number 05AX04001324 AM25 Licence No and Date 0511027023/06/08/2024

Net fabricated weight of export item may be specified as 49 MT.
1. item and its quantity may be allowed as 37277 Kgs as 1.047 Kgs/Kg content in the export item as 2. Quantity of import item at Sl.No.2 may be allowed as 70 Nos. on net to net basis. However, duty free weight of this item may be allowed as 6447 Kgs as inclusive of 1 % wastage as claimed by the firm. 3. Import items at SI.No.3 &4 may be omitted as not imported by the firm. 4. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 75.08 Kgs as 1.02 Kgs/Kg content in the export item . 5. Import item at Sl.No.6 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 656.7 Kgs as 1.02 Kgs/Kg content in the export item . 6. Quantity of import item at Sl.No.7 may be allowed as 500 Nos. ( 35 Kgs. ) on net to net basis in the export item. 7. Import item at SI.No.8 may be omitted as not imported by the firm. 8. Quantity of import item at Sl.No.9 may be allowed as 4 Nos. on net to net basis.

on net to net basis in the export item. 7. Import item at SI.No.8 may be omitted as not imported by the firm. 8. Quantity of import item at Sl.No.9 may be allowed as 4 Nos. on net to net basis. However, duty free weight of this item may be allowed as 36 Kgs as 1.02 Kgs./Kg. content in the export item as claimed by the firm. 9. Quantity of import item at Sl.No.10 may be allowed as 1 Set ( 112 Kgs. ) on net to net basis in the export item. 10. Import items at SI.No.11 to 17 may be omitted as not imported by the firm. 11.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 78 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001675AM26 RA File Number 09AX04000278 AM25 Licence No and Date 0911007773/21/08/2024

Case No. 79 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001704AM26 RA File Number 09AX04000557 AM25 Licence No and Date 0911008066/30/09/2024

Case No. 80 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001707AM26 RA File Number 09AX04000554 AM25 Licence No and Date 0911008067/30/09/2024 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00001707AM26 RA File Number 09AX04000554 AM25 Licence No and Date 0911008067/30/09/2024 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 81 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004747AM26 RA File Number 05AX04002016 AM25 Licence No and Date 0511028082/01/10/2024

Case No. 82 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004746AM26 RA File Number 05AX04002181 AM25 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

61 Licence No and Date 0511028220/10/10/2024

Details of import items from Sl. No. 15 to 23 and their quantities in Nos. also in addition to weights. 6. Quantity of import item at Sl. No 24 in Nos. also in addition to its weight. 7.

Case No. 83 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005259AM26 RA File Number 05AX04002215 AM25 Licence No and Date 0511028320/15/10/2024 comments of DPIIT dated 02.02.2026, as under:

Net weight of export item may be specified as 34.668 MT.
1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 2,891 Kgs as 1.047 Kgs./Kg. content in the export item as 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ized in the export item and its quantity may be allowed as 2,891 Kgs as 1.047 Kgs./Kg. content in the export item as 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

62 Import items at SI.No. 2 to 4 may be omitted as not imported by the firm 3. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 595.3 Kgs as 1.02 Kgs./Kg. content in the export item as 4. Quantity of import item at Sl.No. 6 may be allowed as 2.76 kgs. on net to net basis in the export item as claimed by the firm. 5. Quantity of import item at Sl.No.7 may be allowed as 14076 Kgs. as 1.047 Kgs/Kg content in the export item as claimed by the firm. 6. Import items at SI.No. 8 to 10 may be omitted as not imported by the firm. 7.

Case No. 84 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001709AM26 RA File Number 09AX04000587 AM25 Licence No and Date 0911008229/28/10/2024

Case No. 85 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001710AM26 RA File Number 09AX04000643 AM25 Licence No and Date 0911008316/06/11/2024 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00001710AM26 RA File Number 09AX04000643 AM25 Licence No and Date 0911008316/06/11/2024 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 86 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001711AM26 RA File Number 09AX04000744 AM25 Licence No and Date 0911008671/20/12/2024

Case No. 87 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001712AM26 RA File Number 09AX04000788 AM25 Licence No and Date 0911008673/20/12/2024

Case No. 88 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005255AM25 RA File Number 05AX04003380 AM25 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

64 Licence No and Date 0511029986/31/12/2024 The Committee considered the case as per agenda and noted that in this case DL has to be issued as per decision taken in NC-1 meeting dated 24.02.2026, the minutes of which are under submission. Hence, the Committee decided to defer the case.

Case No. 89 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005540AM26 RA File Number 05AX04003343 AM25 Licence No and Date 0511030501/23/01/2025 Net fabricated weight of export item may be specified as 36 MT.
1.

er and Date HQ File Number HQRNORM REVIW00005540AM26 RA File Number 05AX04003343 AM25 Licence No and Date 0511030501/23/01/2025 Net fabricated weight of export item may be specified as 36 MT.
1. Import item at Sl.No.1 shall be of relevant grade and size as contained/utilized in the export item and its quantity may be allowed as 13394 Kgs as 1.0475 Kgs/Kg content in the export item as claimed by the firm. 2. Import item at Sl.No.2 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as applied for i.e. 9000 Kgs as 1.02 Kgs/Kg content in the export item. 3. Quantity of import item at Sl.No.3 may be allowed as 1460 Kg.( 700 Sets.) on net to net basis in the export item. 4. Import items at SI.No. 4 to 6 may be omitted as not imported by the firm.
5.

Case No. 90 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be omitted as not imported by the firm.
5.

Case No. 90 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

65 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005834AM25 RA File Number 09AX04000979 AM25 Licence No and Date 0911008894/24/01/2025

Case No. 91 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005928AM25 RA File Number 09AX04000999 AM25 Licence No and Date 0911008937/29/01/2025

Case No. 92 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005929AM25 RA File Number 09AX04001000 AM25 Licence No and Date 0911008938/29/01/2025 comments of Consultant (SKB) dated 10.03.2026, as under:

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

66 SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

QTY: 11768.80 LTR 1% OF THE FOB VALUE 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1,015.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 752 NOS STAINLESS STEEL BARS, GRADE: 10705BA, SIZE: 45X170, 45X155, 36X142, 33X134, 28X116, 118X146, 135X178, MM QTY:

QTY: 11768.80KGS

7027.52 KGS INCLUSIVE OF 592.23% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT COOLANT OIL (IPOL CUT 150 T (CNC/VMC) QTY: 8767.20 LTR

QTY:

QTY: 11768.80KGS

7027.52 KGS INCLUSIVE OF 592.23% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT COOLANT OIL (IPOL CUT 150 T (CNC/VMC) QTY: 8767.20 LTR 1% OF THE FOB VALUE 2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 741.84 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 843 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 28X225, 27X211, 56X202, 54X181, 42X167, 40X154, 36X283, 36X245 MM

QTY: 8767.20 KGS 5238.43 KGS INCLUSIVE OF 606.14% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

67 NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 93 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006375AM25 RA File Number 09AX04001084 AM25 Licence No and Date 0911009097/24/02/2025 comments of Consultant (SKB) dated 10.03.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY &WASTAGE TO BE ALLOWED STAINLESS STEEL BARS,
GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, MM QTY: 12997.00 KGS 7791.92 KGS INCLUSIVE OF 719.34% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

1 TURBINE BLADES (NET CONTENT OF THE IMPORT ITEM SHALL BE 951.00 KGS, WHICH SHOULD BE

OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

1 TURBINE BLADES (NET CONTENT OF THE IMPORT ITEM SHALL BE 951.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

1268 NOS 1% OF THE FOB VALUE UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

68 QTY: 12997 LITERS

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 94 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005967AM26 RA File Number 05AX04004084 AM25 Licence No and Date 0511031154/03/03/2025 comments of DPIIT dated 27.02.2026, as under: Net fabricated weight of export item may be specified as 465 MT. 1. item and its quantity may be allowed as 339,227 Kgs as 1.0414 Kgs/Kg content in the export item as 2. Quantity of import item at Sl.No.2 may be allowed as 1 Nos. on net to net basis. However, duty free weight of this item may be allowed as 984 Kgs as 1.0314 Kgs./Kg. content in the export item as 3. Import item at SI.No.3 may be omitted as not imported by the firm 4. Import item at Sl.No.4 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 8792 Kgs as 1.0489 Kgs/Kg content in the export item as 5. Import items at SI.No.5 to 10 may be omitted as not imported by the firm. 6.

ilized in the export item and its quantity may be allowed as 8792 Kgs as 1.0489 Kgs/Kg content in the export item as 5. Import items at SI.No.5 to 10 may be omitted as not imported by the firm. 6. Import item at Sl.No.11 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 1680 Kgs as 1.045 Kgs/Kg content in the export item as 7. Import item at Sl.No.12 shall be of relevant grade and thickness as contained/utilized in the export 8. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

69 item and its quantity may be allowed as 4243 Kgs as 1.044 Kgs/Kg content in the export item as Import item at Sl.No.13 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 24274 Kgs as 1.042 Kgs/Kg content in the export item as 9. Quantity of import item at Sl.No.14 may be allowed as 32227 Kg.( 4 Sets.) on net to net basis in the export item. 10. Quantity of import item at Sl.No.15 may be allowed as 30 Nos. on net to net basis. However, duty free weight of this item may be allowed as 5285 Kgs inclusive of 2 % wastage as claimed by the firm. 11. Import items at SI.No.16 & 17 may be omitted as not imported by the firm. 12. Import item at Sl.No.18 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 999 Kgs as 1.02 Kgs/Kg content in the export item 13. Quantity of import items at Sl.No.

of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 999 Kgs as 1.02 Kgs/Kg content in the export item 13. Quantity of import items at Sl.No. 19 to 24 (Welding Consumables) may be allowed as 2500 Kgs , 7500 Kgs , 9000 Kgs , 800 Kgs ,1500 Kgs. & 1500 Kgs. respectively. 14. Import items at SI.No.25 to 30 may be omitted as not imported by the firm. 15.

Case No. 95 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006662AM25 RA File Number 05AX04004179 AM25 Licence No and Date 0511031314/12/03/2025 Case deferred for the DL reply of the firm.

Case No. 96 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006901AM25 RA File Number 09AX04001113 AM25 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

70 Licence No and Date 0911009308/26/03/2025

Case No. 97 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006932AM25 RA File Number 05AX04004438 AM25 Licence No and Date 0511031642/28/03/2025 Case deferred for the DL reply of the firm.

Case No. 98 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006935AM25 RA File Number 05AX04004346 AM25 Licence No and Date 0511031649/28/03/2025 comments of DPIIT dated 02.02.2026, as under: Net weight of export item may be specified as 65 MT.
1.

PPLY 00006935AM25 RA File Number 05AX04004346 AM25 Licence No and Date 0511031649/28/03/2025 comments of DPIIT dated 02.02.2026, as under: Net weight of export item may be specified as 65 MT.
1. Quantity of import item at Sl.No.1 may be allowed as 20 Nos. on net to net basis. However, the weight of this item may be allowed as 27,800 Kgs. as 1.047 Kgs/Kg content in the export item as 2. Import item at Sl.No.2 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 28,578 Kgs as 1.01 Kgs./Kg. content in the export item as 3. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

71 Quantity of import item at Sl.No.3 may be allowed as 3449 Kgs.( 375 Sets) on net to net basis. 4. Quantity of import item at Sl.No.4 may be allowed as 14 Kg.( 300 Nos.) on net to net basis. 5. Import items at SI.No.5 & 6 may be omitted as not imported by the firm.
6.

Case No. 99 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000243AM26 RA File Number 09AX04000025 AM26 Licence No and Date 0911009431/15/04/2025

Case No. 100 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000290AM26 RA File Number 09AX04000023 AM26 Licence No and Date 0911009449/17/04/2025

Case No. 101 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

6 Licence No and Date 0911009449/17/04/2025

Case No. 101 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

72 Meeting Number and Date HQ File Number HQRNORM APPLY 00000324AM26 RA File Number 09AX04000024 AM26 Licence No and Date 0911009464/18/04/2025

Case No. 102 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000338AM26 RA File Number 09AX04000052 AM26 Licence No and Date 0911009470/20/04/2025

Case No. 103 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000712AM26 RA File Number 09AX04000105 AM26 Licence No and Date 0911009602/09/05/2025

Submit a coloured drawing of the aircraft components of Sl No 1 to 23, which could indicate the size 1. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

09602/09/05/2025

Submit a coloured drawing of the aircraft components of Sl No 1 to 23, which could indicate the size 1. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

73 of the raw material, the size of the finished export item, the weight of the raw material and the finished product. Test the Mill Certificate of the grade and chemical composition of the imported items. 2. Submit a list of components with the specific name of the component. 3.

Case No. 104 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000752AM26 RA File Number 09AX04000122 AM26 Licence No and Date 0911009610/12/05/2025

Submit a coloured drawing of the aircraft components of Sl No 1 to 6, which could indicate the size of the raw material, the size of the finished export item, the weight of the raw material and the finished product. 1. Test of the Mill Certificate of the grade and chemical composition of the imported items. 2. Submit a list of components with the specific name of the component. 3.

Case No. 105 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001350AM26 RA File Number 05AX04000889 AM26 Licence No and Date 0511033170/06/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001350AM26 RA File Number 05AX04000889 AM26 Licence No and Date 0511033170/06/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

74 comments of DPIIT dated 27.02.2026, as under: Net fabricated weight of export item may be specified as 60 MT. 1. item and its quantity may be allowed as 42,323 Kgs as 1.028 Kgs/Kg content in the export item as 2. Import items at SI.No.2 to 4 may be omitted as not imported by the firm. 3. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 514 Kgs as 1.047 Kgs/Kg content in the export item as 4. Import item at Sl.No.6 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 1530 Kgs as 1.047 Kgs/Kg content in the export item as 5. Quantity of import item at Sl.No.7 may be allowed as 5 Nos. on net to net basis. However, duty free weight of this item may be allowed as 63 Kgs as 1.02 Kgs./Kg. content in the export item as 6. Quantity of import items at Sl.No.8 , 10 & 11 ( Welding Consumables) may be allowed as 2077 Kgs , 78 Kgs and 78 Kgs respectively. 7. Import items at SI.No.9 & 12 to 14 ( Welding Consumables) may be omitted . 8.

port items at Sl.No.8 , 10 & 11 ( Welding Consumables) may be allowed as 2077 Kgs , 78 Kgs and 78 Kgs respectively. 7. Import items at SI.No.9 & 12 to 14 ( Welding Consumables) may be omitted . 8.

Case No. 106 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001519AM26 RA File Number 09AX04000274 AM26 Licence No and Date 0911009830/16/06/2025

Case No. 107 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

75 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001665AM26 RA File Number 09AX04000211 AM26 Licence No and Date 0911009901/24/06/2025

SUBMIT DRAWINGS OF THE EXPORT PRODUCTS. 1.

WHAT IS THE WEIGHT OF EACH IMPORTED ITEM IMPORTING IN NUMBERS? 2.

WHAT IS THE WEIGHT OF EACH FINISHED PRODUCT?
3.

SUBMIT MTC OF THE IMPORTED ITEMS. 4.

SUBMIT PROCESS FLOW CHART, WHICH SHOULD INDICATE THE WASTAGE IN PERCENTAGE, AS WELL AS REMOVAL OF MATERIALS IN TERMS OF WEIGHT AT EACH STAGE OF OPERATION. 5.

Case No. 108 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001666AM26 RA File Number 09AX04000123 AM26 Licence No and Date 0911009902/24/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001666AM26 RA File Number 09AX04000123 AM26 Licence No and Date 0911009902/24/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

SUBMIT DRAWINGS OF THE EXPORT PRODUCTS. 1.

WHAT IS THE WEIGHT OF THE IMPORTED ITEM, IMPORTING IN NUMBERS? 2.

WHAT IS THE WEIGHT OF THE FINISHED PRODUCT?
3.

SUBMIT MTC OF THE IMPORTED ITEMS. 4.

SUBMIT PROCESS FLOW CHART, WHICH SHOULD INDICATE THE WASTAGE IN PERCENTAGE, AS WELL AS REMOVAL OF MATERIALS IN TERMS OF WEIGHT AT EACH STAGE OF OPERATION. 5.

Case No. 109 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001667AM26 RA File Number 09AX04000121 AM26 Licence No and Date 0911009903/24/06/2025 .

WHAT IS THE GENERIC NAME OF THE EXPORT PRODUCT? 1. SUBMIT DRAWINGS OF THE EXPORT PRODUCTS. 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

te 0911009903/24/06/2025 .

WHAT IS THE GENERIC NAME OF THE EXPORT PRODUCT? 1. SUBMIT DRAWINGS OF THE EXPORT PRODUCTS. 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

77 WHAT IS THE WEIGHT OF THE IMPORTED ITEM, IMPORTING IN NUMBERS? 3. WHAT IS THE WEIGHT OF THE FINISHED PRODUCT?
4. SUBMIT MTC OF THE IMPORTED ITEMS. 5. SUBMIT PROCESS FLOW CHART, WHICH SHOULD INDICATE THE WASTAGE IN PERCENTAGE, AS WELL AS REMOVAL OF MATERIALS IN TERMS OF WEIGHT AT EACH STAGE OF OPERATION. 6.

Case No. 110 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001691AM26 RA File Number 05AX04001079 AM26 Licence No and Date 0511033495/25/06/2025 comments of DPIIT dated 27.02.2026, as under: Net fabricated weight of export item may be specified as 60 MT. 1. item and its quantity may be allowed as 42,323 Kgs as 1.028 Kgs/Kg content in the export item as 2. Import items at SI.No.2 to 4 may be omitted as not imported by the firm. 3. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 514 Kgs as 1.047 Kgs/Kg content in the export item as 4. Import item at Sl.No.6 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 1530 Kgs as 1.047 Kgs/Kg content in the export item as 5. Quantity of import item at Sl.No.7 may be allowed as 5 Nos. on net to net basis.

in the export item and its quantity may be allowed as 1530 Kgs as 1.047 Kgs/Kg content in the export item as 5. Quantity of import item at Sl.No.7 may be allowed as 5 Nos. on net to net basis. However, duty free weight of this item may be allowed as 63 Kgs as 1.02 Kgs./Kg. content in the export item as 6. Quantity of import items at Sl.No.8 , 10 & 11 ( Welding Consumables) may be allowed as 2077 Kgs , 78 Kgs and 78 Kgs respectively. 7. Import items at SI.No.9 & 12 to 14 ( Welding Consumables) may be omitted . 8. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 111 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001695AM26 RA File Number 09AX04000242 AM26 Licence No and Date 0911009912/25/06/2025

WHAT IS THE GENERIC NAME OF THE EXPORT PRODUCT? 1. SUBMIT DRAWINGS OF THE EXPORT PRODUCTS. 2. WHAT IS THE WEIGHT OF THE IMPORTED ITEM, IMPORTING IN NUMBERS? 3. WHAT IS THE WEIGHT OF THE FINISHED PRODUCT?
4. SUBMIT MTC OF THE IMPORTED ITEMS. 5. SUBMIT PROCESS FLOW CHART, WHICH SHOULD INDICATE THE WASTAGE IN PERCENTAGE, AS WELL AS REMOVAL OF MATERIALS IN TERMS OF WEIGHT AT EACH STAGE OF OPERATION. 6.

Case No. 112 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001722AM26 RA File Number 09AX04000291 AM26 Licence No and Date 0911009920/26/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001722AM26 RA File Number 09AX04000291 AM26 Licence No and Date 0911009920/26/06/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 113 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001870AM26 RA File Number 09AX04000352 AM26 Licence No and Date 0911009956/04/07/2025

Case No. 114 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001871AM26 RA File Number 09AX04000333 AM26 Licence No and Date 0911009958/04/07/2025

Case No. 115 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001872AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

80 RA File Number 09AX04000332 AM26 Licence No and Date 0911009963/04/07/2025

Case No. 116 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002215AM26 RA File Number 05AX04001232 AM26 Licence No and Date 0511033994/21/07/2025 comments of DPIIT dated 02.02.2026, as under: Net weight of export item may be specified as 161 MT. 1. Import item at Sl.No.1 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 39,887 Kgs as 1.01 Kgs./Kg. content in the export item as 2. Import items at SI.No. 2 & 3 may be omitted as not imported by the firm .
3.

e export item and its quantity may be allowed as 39,887 Kgs as 1.01 Kgs./Kg. content in the export item as 2. Import items at SI.No. 2 & 3 may be omitted as not imported by the firm .
3.

Case No. 117 / NC/1/MEET/Feb/202526/17 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002551AM26 RA File Number 05AX04001603 AM26 Licence No and Date 0511034343/07/08/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

81 comments of DPIIT dated 27.02.2026, as under: Net fabricated weight of export item may be specified as 51 MT. 1. Import items at SI.No.1 & 2 may be omitted as not imported by the firm. 2. Import item at Sl.No.3 shall be of relevant grade and size as contained/utilized in the export item and its quantity may be allowed as 20,100 Kgs as 1.019 Kgs/Kg content in the export item as claimed by the firm. 3. Import item at SI.No.4 may be omitted as not imported by the firm. 4. Quantity of import item at Sl.No.5 may be allowed as 375 Sets ( 402.5 Kgs. ) on net to net basis in the export item. 5. Import items at SI.No.6 to 9 may be omitted as not imported by the firm. 6.

tity of import item at Sl.No.5 may be allowed as 375 Sets ( 402.5 Kgs. ) on net to net basis in the export item. 5. Import items at SI.No.6 to 9 may be omitted as not imported by the firm. 6.

Case No. 118 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002785AM26 RA File Number 09AX04000535 AM26 Licence No and Date 0911010291/20/08/2025

Case No. 119 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003115AM26 RA File Number 05AX04001970 AM26 Licence No and Date 0511035002/10/09/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 120 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003116AM26 RA File Number 05AX04001837 AM26 Licence No and Date 0511035003/10/09/2025

Case No. 121 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003147AM26 RA File Number 09AX04000615 AM26 Licence No and Date 0911010440/11/09/2025

Case No. 122 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM26 RA File Number 05AX04002396 AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM26 RA File Number 05AX04002396 AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

83 Licence No and Date 0511035563/07/10/2025

Case No. 123 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003585AM26 RA File Number 05AX04002393 AM26 Licence No and Date 0511035564/07/10/2025

Case No. 124 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003622AM26 RA File Number 05AX04002343 AM26 Licence No and Date 0511035611/09/10/2025

Case No. 125 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

84 and Date HQ File Number HQRNORM APPLY 00003705AM26 RA File Number 09AX04000740 AM26 Licence No and Date 0911010650/13/10/2025 .Case deferred for the comments of TE.

Case No. 126 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003724AM26 RA File Number 05AX04002514 AM26 Licence No and Date 0511035736/14/10/2025 1. 2. 3. 4. 5. Quantity of import items at Sl. No. 3 &6 in Nos. also in addition to their weights. 6. Justification/basis for the quantities of welding materials supported by following information: 7. a. Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates / Sheets upto 30 mm thickness. i.

ies of welding materials supported by following information: 7. a. Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates / Sheets upto 30 mm thickness. i. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates / Sheets more than 70 mm thickness. iii. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. iv. b. Detailed calculations for the quantities of welding materials required for overlay, if any UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

85 supported by overlay areas and thicknesses.

Case No. 127 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003797AM26 RA File Number 05AX04002556 AM26 Licence No and Date 0511035850/17/10/2025

Quantity of import items at Sl. No. 3 & 4 in Nos. also in addition to their weight. 6. Justification/basis for the quantities of welding materials supported by following information: 7. a. Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates / Sheets upto 30 mm thickness. i. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates / Sheets more than 70 mm thickness. iii. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. iv. b.

eets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates / Sheets more than 70 mm thickness. iii. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. iv. b. Detailed calculations for the quantities of welding materials required for overlay, if any supported by overlay areas and thicknesses. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 128 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004117AM26 RA File Number 05AX04002630 AM26 Licence No and Date 0511036138/07/11/2025

Details of import items from Sl. No. 9 to 16 and their quantities in Nos. also in addition to weights. 6. Quantities of import items at Sl. No 17 to 19 in Nos. also in addition to their weights. 7.

Case No. 129 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004142AM26 RA File Number 09AX04000835 AM26 Licence No and 0911010832/07/11/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r and Date HQ File Number HQRNORM APPLY 00004142AM26 RA File Number 09AX04000835 AM26 Licence No and 0911010832/07/11/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

87 Date

Case No. 130 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004143AM26 RA File Number 09AX04000834 AM26 Licence No and Date 0911010836/07/11/2025

Case No. 131 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004147AM26 RA File Number 05AX04002402 AM26 Licence No and Date 0511036172/07/11/2025

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

88 5. Quantities of import item at Sl. No. 2 in Nos. also in addition to its weight. 6. Justification/basis for the quantities of welding materials supported by following information: a. Weight of steel, which requires imported welding materials, giving break-up of: i. Steel Plates / Sheets upto 30 mm thickness. ii. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 7. b. Detailed calculations for the quantities of welding materials required for overlay, if any, supported by overlay areas and thicknesses.

, Bars / Rods, Castings / Forgings etc. 7. b. Detailed calculations for the quantities of welding materials required for overlay, if any, supported by overlay areas and thicknesses.

Case No. 132 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004209AM26 RA File Number 05AX04002290 AM26 Licence No and Date 0511036250/12/11/2025

Details of import items from Sl. No. 16 to 24 and their quantities in Nos. also in addition to weights. 6. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

89 Quantities of import items at Sl. No 25 to 28 in Nos. also in addition to their weights. 7.

Case No. 133 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004235AM26 RA File Number 05AX04002866 AM26 Licence No and Date 0511036277/13/11/2025

Quantities of import items at Sl. No. 2, 8 & 14 in Nos. also in addition to their weights. 6. Justification/basis for the quantities of welding materials supported by following information: a. Weight of steel, which requires imported welding materials, giving break-up of: i. Steel Plates / Sheets upto 30 mm thickness. ii. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 7. b.

than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 7. b. Detailed calculations for the quantities of welding materials required for overlay, if any ,supported by overlay areas and thicknesses.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 134 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004278AM26 RA File Number 05AX04001748 AM26 Licence No and Date 0511036337/17/11/2025

Quantities of import items at Sl. Nos.2, 3 & 22 in Nos. also in addition to their weights. 6. Use of import items at SI.No. 10 (Hydraulic Jacks) and 30 ( Hydraulic Bolt Tensioner) in the export item at SI.No.1 and whether these are to be exported alongwith export item and details of manufacturing activity on these import items, if any. 7. Justification/basis for the quantities of welding materials supported by following information: a. Weight of steel, which requires imported welding materials, giving break-up of: i. Steel Plates / Sheets upto 30 mm thickness. ii. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 8. b.

than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 8. b. Detailed calculations for the quantities of welding materials required for overlay, if any supported by overlay areas and thicknesses. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 135 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004392AM26 RA File Number 09AX04000893 AM26 Licence No and Date 0911010939/20/11/2025

WHAT IS THE WEIGHT OF IMPORTED CASTINGS IN NUMBERS, AND ALSO THE FINISHED WEIGHT OF THE EXPORT PRODUCTS? 1.

SUBMIT A CHART INDICATING THE NUMBER OF PROCESSES INVOLVED, THE PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 2.

COLOURED DRAWINGS OF THE TURBINE PARTS WITH DIMENSIONS OF THE INITIAL STEEL CASTINGS AND DIMENSIONS OF THE FINISHED PRODUCTS. 3.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED STEEL CASTINGS. 4.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 5.

Case No. 136 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004394AM26 RA File Number 05AX04002952 AM26 Licence No and 0511036457/21/11/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r and Date HQ File Number HQRNORM APPLY 00004394AM26 RA File Number 05AX04002952 AM26 Licence No and 0511036457/21/11/2025 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

92 Date

Case No. 137 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004543AM26 RA File Number 09AX04000924 AM26 Licence No and Date 0911010993/01/12/2025

SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 1.

COLOURED DRAWINGS OF THE TURBINE BLADES WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS. 2.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

Case No. 138 / NC/1/MEET/Feb/202526/17 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

RIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

Case No. 138 / NC/1/MEET/Feb/202526/17 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

93 Case Status Case Approved Party Name SENIOR FLEXONICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004548AM26 RA File Number 05AX04003153 AM26 Licence No and Date 0511036680/01/12/2025 comments of Consultant (Tech-3) dated 09.03.2026, as under:

Import 1 to 3 - As applied including 1% wastage.

Note:- Thickness & grade of imported strips will be same as used in EP.

Case No. 139 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004596AM26 RA File Number 05AX04003191 AM26 Licence No and Date 0511036754/04/12/2025

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

94 4. 5. Justification/basis for the quantities of welding materials supported by following information: a. Weight of steel, which requires imported welding materials, giving break-up of: i. Steel Plates / Sheets upto 30 mm thickness. ii. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 6. b.

30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 6. b. Detailed calculations for the quantities of welding materials required for overlay, if
any, supported by overlay areas and thicknesses.

Case No. 140 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004597AM26 RA File Number 05AX04003174 AM26 Licence No and Date 0511036755/04/12/2025

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

95 5. Quantities of import item at Sl. No. 2 in Nos. also in addition to its weight. 6.

Case No. 141 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004598AM26 RA File Number 05AX04003179 AM26 Licence No and Date 0511036756/04/12/2025

Case No. 142 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004966AM26 RA File Number 09AX04001013 AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004966AM26 RA File Number 09AX04001013 AM26 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

96 Licence No and Date 0911011172/23/12/2025

SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 1.

COLOURED DRAWINGS OF THE TURBINE BLADES WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS. 2.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

Case No. 143 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004967AM26 RA File Number 09AX04001021 AM26 Licence No and Date 0911011173/23/12/2025

SUBMIT A CHART INDICATING THE NUMBER OF PROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), CUTTING WEIGHT IN KG (AFTER), WASTAGE IN KG, AND WASTAGE IN PERCENTAGE. 1. COLOURED DRAWING OF THE TURBINE PART, WHICH COULD INDICATE THE SIZE OF THE RAW MATERIAL, THE SIZE OF THE FINISHED EXPORT ITEM, THE WEIGHT OF THE RAW MATERIAL AND THE FINISHED PRODUCT. 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ZE OF THE RAW MATERIAL, THE SIZE OF THE FINISHED EXPORT ITEM, THE WEIGHT OF THE RAW MATERIAL AND THE FINISHED PRODUCT. 2. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

97 TEST THE MILL CERTIFICATE OF THE GRADE AND CHEMICAL COMPOSITION OF THE IMPORTED ITEMS. 3. ALL DOCUMENTS SHOULD BE CERTIFIED BY CE. 4.

Case No. 144 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004968AM26 RA File Number 09AX04001012 AM26 Licence No and Date 0911011175/23/12/2025

SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 1.

COLOURED DRAWINGS OF THE TURBINE BLADES WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS. 2.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

MICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 145 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005101AM26 RA File Number 09AX04001055 AM26 Licence No and Date 0911011225/31/12/2025

SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 1.

COLOURED DRAWINGS OF THE TURBINE BLADES WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS. 2.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 3.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 4.

Case No. 146 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005317AM26 RA File Number 04AX04001108 AM26 Licence No and 0411011110/14/01/2026 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r and Date HQ File Number HQRNORM APPLY 00005317AM26 RA File Number 04AX04001108 AM26 Licence No and 0411011110/14/01/2026 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

99 Date

Case No. 147 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005600AM26 RA File Number 05AX04003716 AM26 Licence No and Date 0511037803/29/01/2026

Case No. 148 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005667AM26 RA File Number 09AX04001172 AM26 Licence No and Date 0911011466/02/02/2026

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg (after), wastage in kg, and wastage in percentage.
Coloured drawings of the Turbine Blades with dimensions of the initial Raw Material and dimensions of the finished products. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

oloured drawings of the Turbine Blades with dimensions of the initial Raw Material and dimensions of the finished products. UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

100

Mill Test Certificate of the grades and chemical composition of the imported raw materials.
All the documents should be certified by a Chartered Engineer.

Case No. 149 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005838AM26 RA File Number 09AX04001201 AM26 Licence No and Date 0911011530/09/02/2026

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg (after), wastage in kg, and wastage in percentage.
Coloured drawings of the Turbine Blades with dimensions of the initial Raw Material and dimensions of the finished products.
Mill Test Certificate of the grades and chemical composition of the imported raw materials.
All the documents should be certified by a Chartered Engineer.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd chemical composition of the imported raw materials.

All the documents should be certified by a Chartered Engineer.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

101

Case No. 150 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005883AM26 RA File Number 09AX04001212 AM26 Licence No and Date 0911011544/11/02/2026

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg (after), wastage in kg, and wastage in percentage.
Coloured drawing of the Bonnet and FLW TB BMS-
Test Mill Certificate of the grade and chemical composition of the imported STEEL FLAT BAR and HOT-FINISHED Tubes
All the documents should be certified by a Chartered Engineer.

Case No. 151 / NC/1/MEET/Feb/202526/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006029AM26 RA File Number 09AX04001253 AM26 Licence No and Date 0911011610/19/02/2026 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00006029AM26 RA File Number 09AX04001253 AM26 Licence No and Date 0911011610/19/02/2026 UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

102

WHAT IS THE NAME OF THE TURBINE PART? 1.

SUBMIT A CHART INDICATING THE NUMBER OFPROCESSES INVOLVED, PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE. 2.

COLOURED DRAWINGS OF THE TURBINE PART WITH DIMENSIONS OF THE INITIAL RAW MATERIAL AND DIMENSIONS OF THE FINISHED PRODUCTS. 3.

MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED RAW MATERIALS. 4.

ALL THE DOCUMENTS SHOULD BE CERTIFIED BY A CHARTERED ENGINEER. 5.

UDIN00652597AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6990 --apply.