IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION)

MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Jan/202526/16 DATED: 24/02/2026

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Jan/202526/16 dated 24/02/2026 of Norms Committee - I for the year 2025-26 was held on 24/02/2026 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 RANDHEEP THAKUR,Joint DGFT DGFT(HQ) 2 Ashwani Ojha,Deputy Director DGFT(HQ) 3 Kamlesh Singh,Assistant Section Officer DGFT(HQ) 4 Sk Bhatnagar,Technical Consultant DGFT Department for Promotion of Industry & Internal 5 Sushil Jain,Technical Consultant UDIN00653165AM26 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director,DGFT(HQ) on 30-Mar-2026. Digitally Signed. Name: ASHWANI KUMAR OJHA( Deputy Director ) Date: 30-Mar-2026 17:31:38 Reason: ak.ojha90@gov.in Location: DGFT(HQ) Signature Not Verified

2 Trade,Ministry of Commerce & Industry

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

-2026 17:31:38 Reason: ak.ojha90@gov.in Location: DGFT(HQ) Signature Not Verified

2 Trade,Ministry of Commerce & Industry

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name BOSCH LIMITED Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 16 and 24/02/2026 HQ File Number HQRNORM REVIW00009055AM24 RA File Number 072404000417 AM11 Licence No and Date 0710076813/19/01/2011

Norms Committee Decision:

Case deferred for the comments of TE.

Case No. 2 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number 018005000276AM18 RA File Number 039504000052 AM18 Licence No and Date 0310815484/01/09/2017

Case No. 3 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name LEGENDS THE MERCHANT GROUP Meeting Number and Date HQ File Number HQRNORM REVIW00005154AM25 RA File Number NA Licence No and Date 0510407548/17/08/2018 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 4 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00007676AM24 RA File Number 318304000160 AM20 Licence No and Date 3110067707/06/03/2020 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed in NC-1 meeting dated 17/03/2023 as per comments of DPIIT dated 23.02.2026, as under:

Import item at Sl.No.2 shall be of relevant grade and thickness as contained /utilized in the export item and its quantity may be allowed as 520 Kgs as 1.083 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap. 1. Import item at Sl.No.3 shall be of relevant grade and thickness as contained /utilized in the export item and its quantity may be allowed as 2427.3 Kgs as 1.082 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap. 2.

grade and thickness as contained /utilized in the export item and its quantity may be allowed as 2427.3 Kgs as 1.082 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap. 2. Import item at Sl.No.4 shall be of relevant grade and thickness as contained /utilized in the export item and its quantity may be allowed as 626 Kgs as 1.075 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap. 3. Quantity of import items at SI.No.1 ,5 & 6 shall remain the same as ratified in NC-1 meeting No.NC/1/MEET/Feb/202223/23 dated 17.03.2023. 4.

RA concerned may take suitable consequential action accordingly.

Case No. 5 / NC/1/MEET/Jan/202526/16 Case Status Case Rejected Party Name GODREJ AND BOYCE MANUFACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002331AM23 RA File Number 018005000474 AM21 Licence No and Date 0310836537/05/06/2020 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00002331AM23 RA File Number 018005000474 AM21 Licence No and Date 0310836537/05/06/2020 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 The Committee considered the case as per agenda and noted that vide mail dt.18.07.25, the firm has requested for withdrawal of review application as redemption of Advance Authorization has already been done. Hence, the Committee decided to close the present review application showing it as “rejected”.

Case stands rejected.

Case No. 6 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 16 and 24/02/2026 HQ File Number 018005000675AM21 RA File Number 092404000390 AM21 Licence No and Date 0910069339/19/10/2020 The Committee considered the case as per the agenda and decided to ratify the ad-hoc norms as per the comments of Consultant (SKB) dated 23.01.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 5288.40 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 8136 NOS STAINLESS STEEL BARS) (CB 403- DIA 60, GTD 450- DIA 70 & 17- 4PH - 140 RCS) QTY: 29696.40 KGS 175538.98
KGS INCLUSIVE OF 231.65%WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

KGS INCLUSIVE OF 231.65%WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

6 NOTE: THE GRADE OF IMPORTED STAINLESS STEELBARS SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 7 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number 018005000676AM21 RA File Number 092404000391 AM21 Licence No and Date 0910069340/19/10/2020

Case No. 8 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name PUNCH RATNA FASTENERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00085898AM21 RA File Number 05AA04032174 AM21 Licence No and Date 0511001335/17/02/2021

Case No. 9 / NC/1/MEET/Jan/202526/16 Case Status Case Rejected Party Name PUNCH RATNA FASTENERS PRIVATE LIMITED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

/02/2021

Case No. 9 / NC/1/MEET/Jan/202526/16 Case Status Case Rejected Party Name PUNCH RATNA FASTENERS PRIVATE LIMITED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

7 Meeting Number and Date HQ File Number HQRNORM APPLY 00001180AM24 RA File Number NA Licence No and Date 0511001335/17/02/2021 The Committee considered the case as per agenda and noted that this is a duplicate case of case at S.No.9. Hence, the Committee decided to close this case showing it as “rejected”.

Case stands rejected.

Case No. 10 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE: Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3.

d. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5. Case stands deferred.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 11 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006906AM22 RA File Number 03AA04000708 AM22 Licence No and Date 0311003091/08/04/2021

Case No. 12 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005409AM25 RA File Number 09AA04001485 AM22 Licence No and Date 0911000725/26/04/2021 comments of the Consultant (SKB) dated 23.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 7301.56 KGS INCLUSIVE OF 172.03%WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 2684.10KGS, WHICH SHOULD BE REFLECTED

OF 172.03%WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 2684.10KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE)

389 NOS (STAINLESS STEEL BARS) (GTD 450- 100RCS )

QTY: 12448.00 KGS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

Case No. 13 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005410AM25 RA File Number 09AA04001486 AM22 Licence No and Date 0911000723/26/04/2021 comments of the Consultant (SKB) dated 23.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 5859.15 KGS INCLUSIVE OF 205.98% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 1 CONTENT OF IMPORT ITEM SHALL BE 1914.88 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

512 NOS STAINLESS STEEL BARS (GTD 450-100RCS)

QTY: 9984.00 KGS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

8 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

512 NOS STAINLESS STEEL BARS (GTD 450-100RCS)

QTY: 9984.00 KGS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED STAINLESS STEELBARS SHOULD BE MATCHED WITH THE

Case No. 14 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005406AM25 RA File Number 09AA04001710 AM22 Licence No and Date 0911000733/26/04/2021 comments of the Consultant (SKB) dated 23.02.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED PRECISION COMPONENTS FOR AIRCRAFT (PART NAME - BODY, VALVE- 63003153 & 63005062), (THE NET CONTENT OF THE IMPORT ITEM SHALL BE 91.00 KG., WHICH SHOULD BE REFLECTED 1 13 NOS BODY, VALVE, - 63003153 & 63005062 (INCONEL CASTING)

QTY: 221 KGS 199.29 KG INCLUSIVE OF 119% WASTAGE ON THE NET WEIGHT OF THE IMPORTED INCONAL CASTING IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

1 KGS 199.29 KG INCLUSIVE OF 119% WASTAGE ON THE NET WEIGHT OF THE IMPORTED INCONAL CASTING IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

11 AND INVOICES)

NOTE: THE GRADE OF IMPORTED BODY VALVE OFNCONEL ALLOY SHOULD BE MATCHED WITH THE GRADE OF INCONEL ALLOY OF THE EXPORT PRODUCT.

Case No. 15 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005407AM25 RA File Number 09AA04001484 AM22 Licence No and Date 0911000727/26/04/2021 comments of Consultant (SKB) dated 23.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 CONTENT OF IMPORT ITEM SHALL BE 707.52 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

402 NOS (STAINLESS STEEL BARS) (GTD 450-150 RCS)

QTY: 3939.60 KGS 2386.90 KG INCLUSIVE OF 237.36% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

KG INCLUSIVE OF 237.36% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED STAINLESS STEELBARS SHOULD BE MATCHED WITH THE

Case No. 16 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005408AM25 RA File Number 09AA04001483 AM22 Licence No and Date 0911000726/26/04/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 CONTENT OF IMPORT ITEM SHALL BE 2978.60 REFLECTED IN THE SHIPPING BILLS AND INVOICE)

5620 NOS STAINLESS STEEL BARS(CB 403- DIA 60 )

QTY: 20232.00KGS 11918.57KGS INCLUSIVE OF 300.34% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

KGS 11918.57KGS INCLUSIVE OF 300.34% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

13 NOTE: THE GRADE OF IMPORTED STAINLESS STEELBARS SHOULD BE MATCHED WITH THE

Case No. 17 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005405AM25 RA File Number 09AA04002764 AM22 Licence No and Date 0911000844/17/05/2021 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME - BODY, VALVE- 63001264) ,(NET CONTENT OF IMPORT ITEM SHALL BE 1400.00 KG. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 500 NOS BODY, VALVE, 63001264 (NICKEL CASTING)

QTY: 3125.00 KGS 2817.36 KGS INCLUSIVE OF 101.24% WASTAGEON THE NET WEIGHT OF THE IMPORTED NICKEL CASTINGS IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED BODY VALVES OF NICKEL ALLOYCASTING SHOULD BE UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

D NICKEL CASTINGS IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED BODY VALVES OF NICKEL ALLOYCASTING SHOULD BE UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

14 MATCHED WITH THE GRADE OF NICKEL ALLOY OF THE EXPORT PRODUCT.

Case No. 18 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005404AM25 RA File Number 09AA04003173 AM22 Licence No and Date 0911000927/27/05/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITYAPPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT-, (PART NAME

2205969 & 82010243: FUEL RETURN VALVES), (NET CONTENT OF IMPORT ITEM SHALL BE 218.70 K.G. WHICH SHOULD BE REFLECTED AND INVOICE) 162 NOS ALUMINIUMALLOY SAND & INVESTMENT CASTING, - A357, AMS 4219, AMS4215 (PART NAME: 2205965, 82010243

QTY: 380.70 KGS 276.35 KGS INCLUSIVE OF 26.36% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM ALLOY CASTING IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED BODY VALVES OF ALUMINIUM ALLOY CASTING SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

MPORTED BODY VALVES OF ALUMINIUM ALLOY CASTING SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 19 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005403AM25 RA File Number 09AA04003172 AM22 Licence No and Date 0911000954/27/05/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME MANIFOLD OIL INLET /OUTLET - 2372641), (THE NET CONTENT OF THE IMPORT ITEM SHALL BE 100.00 K.G., WHICH SHOULD BE REFLECTED AND INVOICES) 200 NOS A357.0 ALUMINIUM ALLOY, AMS4219 CASTING, -T61 2372641

QTY: 240.00 KGS 150.00 KGS INCLUSIVE OF 50% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM ALLOY CASTING IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED BODY VALVES OF ALUMINIUMALLOY CASTING SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

IMPORTED BODY VALVES OF ALUMINIUMALLOY CASTING SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 20 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005402AM25 RA File Number 09AA04003223 AM22 Licence No and Date 0911000958/28/05/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY &WASTAGE TO BE ALLOWED 1 BASE (BB1K0002B) (NET CONTENT OF IMPORT ITEM SHALL BE 109.71 KG. WHICH SHOULD BE REFLECTED AND INVOICE) 69 NOS ALUMINIUM ALLOY, 7050- T7451 PLATE

QTY: 1007. 40 KGS 897.07KGS INCLUSIVE OF 637.46%WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM ALLOY PLATE IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED ALUMINIUM ALLOY PLATE SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

E: THE GRADE OF IMPORTED ALUMINIUM ALLOY PLATE SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 21 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name LOYAL EQUIPMENTS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00007265AM23 RA File Number 08AA04007720 AM22 Licence No and Date 0811001783/21/06/2021

It is observed that description of export products is not mentioned in the application. Export mentioned in the CE certificate is Molsieve Valve Skid (HS code 84196000 applicable to Machinery for liquifying air and other gases), but Skid may not be treated as a machinery. Further, the CE certificate is under Para 4.07A applicable to Self-Ratification Scheme, which does not require ratification by NC.
Therefore, the following are required:- Clarification on (i) the export product, its classification, technical write-up with end use and (ii) applicable Para of FTP under which application has been made. a. Copy of export order. b. Detail technical note on manufacturing process including the relevant flow sheet. c. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. d. Weight of each Export Product. e. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated.

ous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. f. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. g. Dimensional drawings (legible copy) at each stage of manufacturing process in support of wastage claimed for each export product. h. Copies of GST invoices in respect of waste disposal for each imported item. i.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

tage claimed for each export product. h. Copies of GST invoices in respect of waste disposal for each imported item. i.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

18 Case stands deferred

Case No. 22 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00121082AM22 RA File Number 09AA04004973 AM22 Licence No and Date 0911001075/22/06/2021

SL No ITEM OF EXPORT

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1435.60 REFLECTED IN THE SHIPPING BILLS AND INVOICE)

1940 NOS STAINLESS STEEL BARS (GRADE 10705 SIZE: 55X117, 56X104, 46X99, 52X68, 48X116, 48X72, MM )

QTY: 16781.00 kgs 9991.06 KG INCLUSIVE OF 595.95% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

TAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 23 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005401AM25 RA File Number 09AA04006772 AM22 Licence No and Date 0911001134/05/07/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED. QUANTITY & WASTAGE TO BE ALLOWED 1 CONTENT OF IMPORT ITEM SHALL BE 1920.00 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

1600 NOS STAINLESS STEEL FLAT BARS (GRADE: B50A947A4 -52X72, 62X128MM)

QTY: 10720.00 KGS 6320.06 KG INCLUSIVE OF229.17% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

AINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 24 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005400AM25 RA File Number 09AA04006761 AM22 Licence No and Date 0911001135/05/07/2021 comments of the Consultant (SKB) dated 23.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE PARTS / BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 5118.00 KGS, WHICH SHOULD BE REFLECTED AND INVOICES)

3412 NOS STAINLESS STEEL BARS (X5CrNiMocuNb 14-5 - 85MM, M-152 -120 MM RCS, X12CRNIMOV12-2

140X140)

QTY: 23884.00 KGS 14228.04 KG INCLUSIVE OF 178% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

LESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 25 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00134046AM22 RA File Number 31AA04020071 AM22 Licence No and Date 3111000446/08/07/2021

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

ls, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5. Case stands deferred

Case No. 26 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name IND SPHINX PRECISION LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00133864AM22 RA File Number 30AA04003554 AM22 Licence No and Date 3011000861/08/07/2021 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

The firm proposes to import Tungsten Carbide Shank, Tungsten Carbide Pin along with consumables such as Diamond Grinding Wheel, Marking Solution, Ultrasonic Solution to manufacture Tools for Drilling (PCB drill made from composite blank of Tungsten Carbide). Manufacturing activity in the proposal is not clear. i. Therefore, the following are required for further examination of the request: ii.

Details of manufacturing operations involved and the use of each of the import item in the export product. a. Stage-wise wastage supported by dimensional drawings and weight. b. Catalogue and labeled diagram of the product along with write-up. c.

he use of each of the import item in the export product. a. Stage-wise wastage supported by dimensional drawings and weight. b. Catalogue and labeled diagram of the product along with write-up. c.

Case stands deferred

Case No. 27 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name MENON BEARINGS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00135493AM22 RA File Number 03AA04029067 AM22 Licence No and Date 0311005250/09/07/2021

Case No. 28 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name PJB PROJECTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00152616AM22 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

23 RA File Number 07AA04011880 AM22 Licence No and Date 0711001629/02/08/2021

Case No. 29 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name YAMAHA MUSIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00153346AM22 RA File Number 05AA04061551 AM22 Licence No and Date 0511003976/03/08/2021

THERE ARE 32 ITEMS TO BE IMPORTED AGAINST EXPORT OF 64968 NOS ACOUSTIC GUITAR, F310 NT//EX & F310 TBS//EX (ACOUSTIC GUITAR). HOWEVER, APPENDIX 4E INDICATES ONLY 12 NOS ITEMS.

976/03/08/2021

THERE ARE 32 ITEMS TO BE IMPORTED AGAINST EXPORT OF 64968 NOS ACOUSTIC GUITAR, F310 NT//EX & F310 TBS//EX (ACOUSTIC GUITAR). HOWEVER, APPENDIX 4E INDICATES ONLY 12 NOS ITEMS. SUBMIT REVISED APPENDIX 4E AND SUBMIT INFORMATION ACCORDING TO THE APPENDIX 4E FORMAT.

2.WHAT IS THE MEANING OF 19.49 PCS OF IMPORTED HARDENER AA SETTER? IS IT IN NUMBERS? HOW MUCH QUANTITY WILL BE REQUIRED IN EACH EXPORT PRODUCT, AND HOW MUCH WASTAGE TO BE CLAIMED AGAINST EACH EXPORT PRODUCT? SIMILARLY CLARIFY THE BASIS OF QUANTITY WORKED OUT OF THE OTHER IMPORTED ITEMS. SUBMIT AN EXCEL SHEET, WHICH CLEARLY INDICATE THE REQUIREMENT OF THE IMPORTED ITEMS IN THE EXPORT PRODUCT AND THE WASTAGE TO BE CLAIMED. Case stands deferred

Case No. 30 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name JAYANITA EXPORTS PRIVATE LTD. Meeting Number and Date HQ File Number HQRNORM REVIW00000419AM25 RA File Number 05AA04067715 AM22 Licence No and Date 0511004018/05/08/2021 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00000419AM25 RA File Number 05AA04067715 AM22 Licence No and Date 0511004018/05/08/2021 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

24 comments of Consultant (SKB) dated 24.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED WASTAGE TO BE ALLOWED 1 CURTAIN RODS MADE OF SS PIPES WITH DIFFERENT TYPES OF ATTACHMENTS

536250.00 KGS SS PIPESDIA 9 MM TO 34 MM THICKNESS 0.3MM TO 1MM QTY: 550000.00 KGS WASTAGE @1.5% ON THE NET WEIGHT OF SS PIPES DIA 9 MM TO 34 MM THICKNESS 0.3MM TO 1MM OF THE EXPORT PRODUCTS.

NOTE: THE DIAMETER AND THICKNESS OF VARIOUS SIZES OF IMPORTED SS PIPES SHOULD BE MATCHED WITH THE DIAMETER AND THICKNESS OF THE EXPORT OF CURTAIN RODS. 1. THE WEIGHT OF THE IMPORTED SS PIPES OF VARIOUS SIZES SHOULD BE MATCHED WITH THE WEIGHT OF THE CURTAIN RODS OF VARIOUS SIZES AFTER CONSIDERING WASTAGE @1.5% ON NET WEIGHT OF THE EXPORT PRODUCT. 2.

Case No. 31 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005399AM25 RA File Number 09AA04018564 AM22 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005399AM25 RA File Number 09AA04018564 AM22 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

25 Licence No and Date 0911002005/06/12/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2816.00KGS, WHICH SHOULD BE REFLECTED AND INVOICES)

88 NOS STAINLESS STEEL BARS (17-4PH -140 MM RCS)

QTY: 7304.00 KGS 4632.32 KG INCLUSIVE OF 64.5% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

Case No. 32 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005398AM25 RA File Number 09AX04000033 AM22 Licence No and Date 0911002081/15/12/2021 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00005398AM25 RA File Number 09AX04000033 AM22 Licence No and Date 0911002081/15/12/2021 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 CONTENT OF IMPORT ITEM SHALL BE 4615.05KGS, WHICH SHOULD BE REFLECTED AND INVOICES)

2797 NOS STAINLESS STEEL BARS (X4 CrNiCuMo14-5, X12 CRNIMOV12-2 SIZE: 140X140 MM )

QTY: 29368.50 KGS 17677.03 KG INCLUSIVE OF 283.03% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE

Case No. 33 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005397AM25 RA File Number 09AX04000240 AM22 Licence No and Date 0911002604/03/03/2022 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00005397AM25 RA File Number 09AX04000240 AM22 Licence No and Date 0911002604/03/03/2022 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 34 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005396AM25 RA File Number 09AX04000359 AM22 Licence No and Date 0911002748/24/03/2022

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES( NET CONTENT OF IMPORT ITEM SHALL BE 5972.85KGS, WHICH SHOULD BE REFLECTED AND INVOICES)

9189 NOS STAINLESS STEEL BARS (CB 403- 60 MM & CB 403- 85 MM )

QTY: 31058.82 KGS 18653.80 KG INCLUSIVE OF 212.31% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

28 Case No. 35 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name JOHN CRANE SEALING SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004357AM25 RA File Number 07AX04001562 AM23 Licence No and Date 0711006208/18/01/2023

AS PER THE APPLICATION'S SUMMARY, THE ITEM OF IMPORT IS SEAMLESS PIPES AGAINST THE EXPORT ITEMS. HOWEVER, APPENDIX 4E ATTACHED TO BO PORTAL, INDICATES THE IMPORT OF PIPES AND INDIGENOUS COMPONENTS FOR EXPORT ITEMS. ALL THE ITEMS OF IMPORT ARE ON A NET-TO-NET BASIS.

S AGAINST THE EXPORT ITEMS. HOWEVER, APPENDIX 4E ATTACHED TO BO PORTAL, INDICATES THE IMPORT OF PIPES AND INDIGENOUS COMPONENTS FOR EXPORT ITEMS. ALL THE ITEMS OF IMPORT ARE ON A NET-TO-NET BASIS. SINCE ALL THE IMPORTED/INDIGENOUS ITEMS ARE ON A NET-TO-NET BASIS, THEN WHAT KIND OF MANUFACTURING ACTIVITY IS INVOLVED? GIVE IN DETAIL. Case stands deferred

Case No. 36 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005842AM23 RA File Number 31AX04000300 AM23 Licence No and Date 3111001977/20/01/2023

Case No. 37 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005390AM25 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

29 RA File Number 09AX04001167 AM23 Licence No and Date 0911004852/20/04/2023 comments ofConsultant (SKB) dated 23.02.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 CONTENT OF IMPORT ITEM SHALL BE 35.10 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

39 NOS STAINLESS STEEL BARS, GRADE: 10705BA, SIZE: 59X177, MM

QTY: 1021.80 KGS 625.17 KGS INCLUSIVE OF 1681.11% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 CONTENT OF IMPORT ITEM SHALL BE 474.76 REFLECT IN THE SHIPPING BILLS AND INVOICES) 572 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 42X167, 36X283, 29X245, 59X177, 40X154 MM

QTY: 5519.80 KGS

ORT ITEM SHALL BE 474.76 REFLECT IN THE SHIPPING BILLS AND INVOICES) 572 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 42X167, 36X283, 29X245, 59X177, 40X154 MM

QTY: 5519.80 KGS 3351.90 KGS INCLUSIVE OF 606.02% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 3 CONTENT OF IMPORT ITEM SHALL BE 887.60 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1268 NOS STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73 MM QTY: 11792.40 KGS 7189.56 KGSINCLUSIVE OF 710% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

30 NOTE: THE GRADE OF IMPORTED STAINLESS STEELBARS SHOULD BE MATCHED WITH THE

Case No. 38 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005387AM25 RA File Number 09AX04001168 AM23 Licence No and Date 0911004856/21/04/2023

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (HOUSING MOUNT

70720602- 113)(NET CONTENT OF IMPORT ITEM SHALL BE 688.00 KG, WHICH SHOULD BE REFLECTED AND INVOICES) 86 NOS STAINLESS STEEL CASTING MOUNT HOUSING, P/NO.

S FOR AIRCRAFT (HOUSING MOUNT

70720602- 113)(NET CONTENT OF IMPORT ITEM SHALL BE 688.00 KG, WHICH SHOULD BE REFLECTED AND INVOICES) 86 NOS STAINLESS STEEL CASTING MOUNT HOUSING, P/NO. 70720602-113

QTY: 1075.00 KGS 780.88 KG INCLUSIVE OF 13.50% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL CASTINGS IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL CASTINGS SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 39 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005388AM25 RA File Number 09AX04000004 AM24 Licence No and Date 0911004855/21/04/2023

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 1229.20 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

1756 NOS STAINLESS STEEL BARS, GRADE: 10705BA-ST SIZE: 33X52, 47X75, 55X90, 66X94 MM

QTY: 9833.60 KGS 5900.16 KGS INCLUSIVE OF 380% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 248.00 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 496 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 33X52, 40X62, MM

QTY: 2058.40 KGS 1240.00 KGS INCLUSIVE OF 400% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

STEEL BARS, GRADE: 10705BU, SIZE: 33X52, 40X62, MM

QTY: 2058.40 KGS 1240.00 KGS INCLUSIVE OF 400% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT TURBINE BLADES, (NET STAINLESS STEEL 2635.14 3 1166 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

32 CONTENT OF IMPORT ITEM SHALL BE 536.36 REFLECTED IN THE SHIPPING BILLS AND INVOICES). BARS, GRADE: 10705MBU, SIZE: 33X52, 40X62, MM. QTY: 4314.2 KGS KGSINCLUSIVE OF 391.30% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 4 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 516.32 REFLECTEDIN THE SHIPPING BILLS AND INVOICES) 922 NOS STAINLESS STEEL BARS, GRADE: MTB10AAM, SIZE: 43X62, 43X71, 36X58, MM

QTY: 4149.00 KGS 2498.62 KGSINCLUSIVE OF 383.93% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE

Case No. 40 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005389AM25 RA File Number 09AX04001178 AM23 Licence No and Date 0911004854/21/04/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM REVIW00005389AM25 RA File Number 09AX04001178 AM23 Licence No and Date 0911004854/21/04/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

33 SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 OIL AND GAS DRILLING EQUIPMENT, (NET CONTENT OF IMPORT ITEM SHALL BE 280.00 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 10 NOS TITANIUM ROUND BAR, (GRADE: 6Al- 6V-2SN, SIZE: 65X1155, 66X1771, 86X1810, 86X2170, 103X1700 MM)

QTY: 430.00KGS 398.16KGS INCLUSIVE OF 42.20% WASTAGE ON THE NET WEIGHT OF THE IMPORTED TITANIUM BAR IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED TITANIUM ROUNDBARS SHOULD BE MATCHED WITH THE GRADE OF TITANIUM BARSUSED FOR THE EXPORT PRODUCT.

Case No. 41 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001040AM24 RA File Number 09AX04000151 AM24 Licence No and Date 0911005094/23/05/2023

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

1005094/23/05/2023

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

34 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 600.60 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

273 NOS STAINLESS STEEL BARS, GRADE: 10705BA, SIZE: 86X146, 73X118, 59X177, 60X198 MM

QTY:7938.84KGS 4755.67 KGS INCLUSIVE OF691.82% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 461.58 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 471 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 42X167, 40X154, 42X281, 36X283, 33X265, 29X245 MM

QTY: 4191.90 KGS 2524.56 KGS INCLUSIVE OF 446.94% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 3 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 795.06 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1262 NOS STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 29X115, MM

QTY: 9465.00 KGS 5633.75KGSINCLUSIVE OF 611.11% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

Case No. 42 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

HE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

Case No. 42 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

35 Party Name SPARECO INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00001049AM24 RA File Number 05AX04000432 AM24 Licence No and Date 0511018943/23/05/2023

ls, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case stands deferred.

Case No. 43 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name SENIOR FLEXONICS INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00001106AM24 RA File Number 05AX04000533 AM24 Licence No and Date 0511018994/25/05/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

36 SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED (1) STAINLESS STEEL STRIP, 169.6 X 0.20 MM AISI 316TI DIN 1.4571 (1BE0200169P) QTY: 7000.00 KGS 6974.05 KGS INCLUSIVE OF 1.0% WASTAGE ON THE NET WEIGHT OF STAINLESS-STEEL STRIPS 169.6 X 0.20 MM IN THE EXPORT PRODUCT. 1 AUTOMOTIVE FLEXIBLE EXHAUST CONNECTOR (CORRUGATED) MADE OF STAINLESS STEEL, (NET CONTENT OF IMPORTED ITEM S. NO.1 QTY. 6905 KGS AND S. NO.2 QTY.

69.6 X 0.20 MM IN THE EXPORT PRODUCT. 1 AUTOMOTIVE FLEXIBLE EXHAUST CONNECTOR (CORRUGATED) MADE OF STAINLESS STEEL, (NET CONTENT OF IMPORTED ITEM S. NO.1 QTY. 6905 KGS AND S. NO.2 QTY. 6905 KGS USED IN EXPORT) 40230 NOS (13810.00 KGS) (2) STAINLESS STEEL STRIP, 173.6 X 0.20 MM AISI 316TI DIN 1.4571 (1BE0200173P) QTY: 7000.00 KGS 6974.05 KGS INCLUSIVE OF 1.0% WASTAGE ON THE NET WEIGHT OF STAINLESS-STEEL STRIPS 173.6 X 0.20 MM IN THE EXPORT PRODUCT.

NOTE: THE THICKNESS OF THE IMPORTED STAINLESS-STEEL STRIPS SHOULD MATCH WITHTHE THICKNESS OF THE STAINLESS-STEEL STRIPS OF THE EXPORT PRODUCT.

Case No. 44 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001117AM24 RA File Number 05AX04000426 AM24 Licence No and Date 0511018998/25/05/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001117AM24 RA File Number 05AX04000426 AM24 Licence No and Date 0511018998/25/05/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

37 comments of DPIIT dated 19.02.2026, as under:

Net weight of export items at SI.No.1 & 2 may be specified as 590 MT & 678 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 33,700 Kgs as 1.05 Kgs./Kg. content in the export item at SI.No.1 as claimed by the firm. 2. Quantity of import item at Sl.No.2 may be allowed as 334718 Kg.( 16 Nos.) on net to net basis in the export item at SI.No.1. 3. Import item at SI.No. 3 may be omitted as not imported by the firm. 4. Quantity of import item at Sl.No.4 may be allowed as 271 Kg on net to net basis in the export item at SI.No.1. 5. Quantity of import items at Sl.No.5, 7, 8 & 9 ( Welding Consumables)may be allowed as 8900 Kgs, 6500 Kgs., 6500 Kgs. & 800 Kgs. respectively on net to net for export item at SI.No.1. 6. Import item at SI.No. 6 may be omitted . 7. Quantity of import item at Sl.No.10 may be allowed as 4 Nos. on net to net basis. However, duty free weight of this item may be allowed as 128464 Kgs as 1.047 Kgs./Kg. content in the export item as claimed by the firm. 8. Import item at Sl.No.11 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 334468 Kgs as 1.05 Kgs./Kg.

s claimed by the firm. 8. Import item at Sl.No.11 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 334468 Kgs as 1.05 Kgs./Kg. content in the export item at SI.No.2 as claimed by the firm. 9. Import item at Sl.No.12 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 24,425 Kgs. as 1.05 Kgs./Kg. content in the export item at SI.No.2 as claimed by the firm. 10. Quantity of import item at Sl.No.13 may be allowed as 61 Kg on net to net basis in the export item at SI.No.2. 11. Import items atSI.No. 14 & 15 may be omitted . 12. Quantity of import items at Sl.No.16, 17 & 18 ( Welding Consumables) may be allowed as 7120 Kgs, 5600 Kgs & 720 Kgs. respectively. 13.

Case No. 45 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001118AM24 RA File Number 05AX04000531 AM24 Licence No and 0511018999/25/05/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r and Date HQ File Number HQRNORM APPLY 00001118AM24 RA File Number 05AX04000531 AM24 Licence No and 0511018999/25/05/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

38 Date comments of DPIIT dated 02.02.2026, as under:

Net Weight of export items at Sl. No 1, 3, 4 & 5 may be specified as 842 MT, 212 MT , 58 MT
& 318.3 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1.04 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 2. Import items at SI.No. 2 to 5 may be omitted as not imported by the firm. 3. Quantity of import item at Sl.No.6 may be allowed as 2 No.( 17514 Kgs.) on net to net basis in the export item at SI.No.5 as claimed by the firm. 4. Quantity of import item at Sl.No.7 may be allowed as 2 No.( 37460 Kgs.) on net to net basis in the export item at SI.No.1 as claimed by the firm. 5. Quantity of import item at Sl.No.8 may be allowed as 2145 Kgs. on net to net basis in the export item at SI.No.1 as claimed by the firm. 6. Import items at SI.No. 9 to to22 may be omitted as not imported by the firm. 7. Import item at Sl.No.23 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1455 Kgs as 1.02 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 8.

rade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1455 Kgs as 1.02 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 8. Import item at Sl.No.24 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 2779 Kgs as 1.02 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 9. Import item at Sl.No.25 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 109290 Kgs as 1.035 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 10. Import item at Sl.No.26 may be allowed as 6422 Kgs. on net to net basis in the export item at SI.No.1 as claimed by the firm. 11. Import item at Sl.No.27 may be allowed as 15 Nos.(12 Kgs ) on net to net basis in the export item at SI.No.1 . 12. Import item at Sl.No.28 may be allowed as 26 Nos.(12 Kgs.) on net to net basis in the export item at SI.No.1 . 13. Import item at Sl.No.29 may be allowed as 9 Sets(6 Kgs.) on net to net basis in the export item at SI.No.1 . 14. Import item at Sl.No.30 may be allowed as 55 Sets(36 Kgs.) on net to net basis in the export item at SI.No.1 . 15. Import items at SI.No. 31 to 34 may be omitted as not imported by the firm. 16. Quantity of import items at Sl.No.35 to 38 ( Welding Consumables) may be allowed as 5,080 Kgs., 6,650 Kgs., 10,500 Kgs., & 355 Kgs. respectively . 17. Import items at SI.No.

rted by the firm. 16. Quantity of import items at Sl.No.35 to 38 ( Welding Consumables) may be allowed as 5,080 Kgs., 6,650 Kgs., 10,500 Kgs., & 355 Kgs. respectively . 17. Import items at SI.No. 39 to 41 may be omitted . 18. Quantity of import item at Sl.No. 42 may be allowed as 6 No.( 29105 Kgs.) on net to net basis in the export item at SI.No.3 as claimed by the firm. 19. Import items at SI.No. 43 to 47 may be omitted as not imported by the firm. 20. Import item at Sl.No.48 shall be of relevant grade and thickness as contained/utilized in the export 21. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

39 item at SI.No.3 and its quantity may be allowed as 10,232 Kgs as 1.0365 Kgs/Kg content in the export item at SI.No.3 as claimed by the firm. Import items at SI.No. 49 to 52 may be omitted as not imported by the firm. 22. Import item at Sl.No.53 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 28420 Kgs as 1.02 Kgs/Kg content in the export item at SI.No.3 . 23. Import items at SI.No. 54 to 60 may be omitted as not imported by the firrm. 24. Quantity of import item at Sl.No.61 may be allowed as 35343 Kgs. as 1.05 Kgs/Kg content in the export item at SI.No.3. 25. Import items at SI.No. 62 & 63 may be omitted as not imported by the firm. 26. Quantity of import item at Sl.No.64 may be allowed as 342 Kgs. 27. Import items at SI.No. 65 , 67 & 68 may be omitted. 28.

ems at SI.No. 62 & 63 may be omitted as not imported by the firm. 26. Quantity of import item at Sl.No.64 may be allowed as 342 Kgs. 27. Import items at SI.No. 65 , 67 & 68 may be omitted. 28. Quantity of import item at Sl.No.66 may be allowed as applied for i.e 2068 Kgs. 29. Quantity of import item at Sl.No. 69 allowed as 1 Set( 7030 Kgs.)on net to net basis in the export item at SI.No.3 . 30. Import item at SI.No. 70 may be omitted as not imported by the firm. 31. Quantity of import item at Sl.No.71 may be allowed as 3 Nos. on net to net basis. However, the weight of this item may be allowed as 8170 Kgs. as 1.02 Kgs/Kg content in the export item at SI.No.4 as claimed by the firm 32. Import items at SI.No. 72 to 92 may be omitted . 33. Quantity of import item at Sl.No.93 may be allowed as 6 No.( 45813 Kgs.) on net to net basis in the export item at SI.No.5 . 34. Import item at Sl.No.94 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 2335 Kgs as 1.043 Kgs/Kg content in the export item at SI.No.5 as claimed by the firm. 35. Import item at Sl.No.95 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 160438 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.5 as claimed by the firm. 36.

and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 160438 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.5 as claimed by the firm. 36. Import item at Sl.No.96 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as 77867 Kgs as 1.015 Kgs/Kg content in the export item at SI.No.5 as claimed by the firm. 37. Import items at SI.No. 97 to 103 may be omitted as not imported by the firm. 38. Quantity of import items at Sl.No.104 & 105 may be allowed as applied for i.e. 440 Ltrs., & 145 Ltrs. respectively . 39. Import items at SI.No. 106 to 111 may be omitted.
40.

Case No. 46 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name WINTAGE ENGINEERS & CONSULTANTS PRIVATE LIMITED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

40 Meeting Number and Date HQ File Number HQRNORM APPLY 00001092AM24 RA File Number 05AX04000400 AM24 Licence No and Date 0511018980/25/05/2023

Case No. 47 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001144AM24 RA File Number 04AX04000129 AM24 Licence No and Date 0411005475/26/05/2023

Case No. 48 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001145AM24 RA File Number 04AX04000132 AM24 Licence No and Date 0411005476/26/05/2023

UDIN00653165AM26

arty Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001145AM24 RA File Number 04AX04000132 AM24 Licence No and Date 0411005476/26/05/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

41 Case No. 49 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name P P ROLLING MILLS MFGING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001184AM24 RA File Number 05AX04000559 AM24 Licence No and Date 0511019098/30/05/2023

Case No. 50 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001449AM24 RA File Number 03AX04001091 AM24 Licence No and Date 0311024415/09/06/2023

Case No. 51 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005386AM25 RA File Number 09AX04000273 AM24 Licence No and Date 0911005290/28/06/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM REVIW00005386AM25 RA File Number 09AX04000273 AM24 Licence No and Date 0911005290/28/06/2023

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

42 QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ITEM SHALL BE 2.72 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 272 NOS STEEL BAR, GRADE: 303. QTY: 13.60 KGS 12.10 KGS INCLUSIVE OF 344.85% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 13,085.22 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 218087 NOS STEEL BAR, GRADE: 304. QTY: 41436.53 KGS 37843.35 KGS INCLUSIVE OF 189.21% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

3 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 1,392.58 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 4802 NOS STEEL BAR, GRADE: 316. QTY: 4321.80 KGS 4020.80KGS INCLUSIVE OF 188.73% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

4 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 618.10 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 6181 NOS STEEL BAR, GRADE: 321. QTY: 1359.82 KGS 1292.82 KGS INCLUSIVE OF 109.16% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

PRECISION COMPONENTS STEEL

NOS STEEL BAR, GRADE: 321. QTY: 1359.82 KGS 1292.82 KGS INCLUSIVE OF 109.16% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

PRECISION COMPONENTS STEEL BAR. 62.70 KGS INCLUSIVE 5 1100 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

43 FOR AIRCRAFT, (NET SHALL BE 33.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) GRADE: 347

QTY: 66.00 KGS OF 90% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

6 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 302.72 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 13760 NOS STEEL BAR, GRADE 440

QTY: 1376.00 KGS 1258.53 KGS INCLUSIVE OF 315.74% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

7 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 2,730.94 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 151719 NOS STEEL BAR, GRADE: 4130

QTY: 5613.00 KGS 5247.77 KGS INCLUSIVE OF 92.16% WASTAGE ON THE NET WEIGHT OF THE IMPORTED LOW ALLOY STEEL IN THE EXPORT PRODUCT

8 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 225.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 25000 NOS STEEL BAR, GRADE: (1213),(12L14),(1215)

QTY: 500.00 KGS 465.14 KGS INCLUSIVE OF 106.73% WASTAGE ON THE NET WEIGHT OF THE IMPORTED CARBON STEEL IN THE EXPORT PRODUCT

PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 387.86

Y: 500.00 KGS 465.14 KGS INCLUSIVE OF 106.73% WASTAGE ON THE NET WEIGHT OF THE IMPORTED CARBON STEEL IN THE EXPORT PRODUCT

PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 387.86 KGS, WHICH SHOULD BE REFLECTED IN THE 1434.75 KGS INCLUSIVE OF 269.91% WASTAGE ON THE NET WEIGHT OF THE IMPORT OF CARBONSTEEL IN THE 9 1763 NOS STEEL BAR, GRADE: 15-5 PH

QTY: 1586.70 KGS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

44 SHIPPING BILLS AND INVOICES) EXPORT PRODUCT

10 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 2,708.12 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 16314 NOS STEEL BAR, GRADE: 17-4 PH

QTY:61993.20 KGS 54854.72 KGS INCLUSIVE OF 2025.56% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

11 PRECISION COMPONENTS FOR AIRCRAFT, (NET SHALL BE 175.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 5000 NOS STEEL BAR, GRADE: ASTM-A- 108

QTY: 350.00 KGS

331.40 KGS INCLUSIVE OF 89.37% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS/ALLOY STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS & ALLOY STEEL OF THE EXPORT PRODUCT.

Case No. 52 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005385AM25 RA File Number 09AX04000275 AM24 Licence No and Date 0911005291/28/06/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

rty Name HQ File Number HQRNORM REVIW00005385AM25 RA File Number 09AX04000275 AM24 Licence No and Date 0911005291/28/06/2023 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ITEM SHALL BE 30.00 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 500 NOS ALUMINIUM BAR GRADE: 2014-T6/T651

QTY: 65.00 KGS 61.00 KGS INCLUSIVE OF 103.30% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM BAR IN THE EXPORT PRODUCT 2 PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ITEM SHALL BE 965.40 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 643600 NOS ALUMINIUM BAR GRADE: 2024-T4

QTY: 1930.80 KGS 1802.40 KGS INCLUSIVE OF 86.70% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM BAR IN THE EXPORT PRODUCT 3 PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ITEM SHALL BE 3,656.09 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 71688 NOS ALUMINIUM BAR GRADE: 2024-T6/T851

QTY: 7168.80 KGS 6738.54 KGS INCLUSIVE OF 84.31% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM BAR IN THE EXPORT PRODUCT PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ALUMINIUM BAR GRADE: 6061

2497.90 KGS INCLUSIVE OF 644.44% WASTAGE ON THE NET 4 37282 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

T CONTENT OF IMPORT ALUMINIUM BAR GRADE: 6061

2497.90 KGS INCLUSIVE OF 644.44% WASTAGE ON THE NET 4 37282 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

46 ITEM SHALL BE 335.54 REFLECTED IN THE SHIPPING BILLS AND INVOICE) QTY: 2982.56 KGS WEIGHT OF THE IMPORTED ALUMINIUM BAR IN THE EXPORT PRODUCT 5 PRECISION COMPONENTS FOR AIRCRAFT, (NET CONTENT OF IMPORT ITEM SHALL BE 2,003.25 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 125203 NOS ALUMINIUM BAR GRADE: 7075-T73

QTY: 5008.12 KGS 4632.51 KGS INCLUSIVE OF 131.25% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM BAR IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED ALUMINIUM BARS SHOULD BE MATCHED WITH THE GRADE OF ALUMINIUM BARS USED FOR THE EXPORT PRODUCT.

Case No. 53 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005384AM25 RA File Number 09AX04000274 AM24 Licence No and Date 0911005293/28/06/2023 comments of Consultant (SKB) dated 23.02.2026 , as under:

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

mber 09AX04000274 AM24 Licence No and Date 0911005293/28/06/2023 comments of Consultant (SKB) dated 23.02.2026 , as under:

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

47 SL NO DESCRIPTION OF THE ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED. 1 PRECISION COMPONENTS FOR AIRCRAFT (ELBOW, NIPPLE FLARLESS (NET SHALL BE 642.32 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 8029 NOS TITANIUM BAR, GRADE: TI- 6AL- 4V

QTY: 2488.99 KGS 2325.13 KGS INCLUSIVE OF261.99% WASTAGE ON THE NET WEIGHT OF THE IMPORTED TITANIUM BAR IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED TITANIUM BARS SHOULD BE MATCHED WITH THE GRADE OF TITANIUM BARS USED FOR THE EXPORT PRODUCT.

Case No. 54 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005383AM25 RA File Number 09AX04000339 AM24 Licence No and Date 0911005384/13/07/2023 comments of Consultant (SKB) dated 26.02.2026, as under:

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY& WASTAGE TO BE ALLOWED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

onsultant (SKB) dated 26.02.2026, as under:

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY& WASTAGE TO BE ALLOWED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

48 1 CONTENT OF IMPORT ITEM SHALL BE 3,375.54 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

2538 NOS STAINLESS STEEL BARS, GRADE: 10705BA-ST SIZE:33X49, 33X52, 46X74, 52X89, 60X95, 54X73, 46X74, 39X59, 75X96, MM

QTY: 22588.00 KGS 13500.47KGS INCLUSIVE OF 299.95% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

2 CONTENT OF IMPORT ITEM SHALL BE 394.40 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1160 NOS GRADE: 10705BU, SIZE: 33X52, 40X62, MM

QTY: 3201.60 KGS 1922.93KGS INCLUSIVE OF 387.56% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

3 CONTENT OF IMPORT ITEM SHALL BE 412.50 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 750 NOS GRADE: 10705MBU, SIZE: 33X52, 40X68, MM

QTY: 3450.00 KGS 2073.72KGS INCLUSIVE OF 402.72% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

4 CONTENT OF IMPORT ITEM SHALL BE 644.10 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 678 NOS GRADE: MTB10AAM, SIZE: 43X62, 33X52, 71X118, 69X103, 58X84, 46X85, MM QTY: 4542.60 KGS 2718.49 KGS INCLUSIVE OF 322.06% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

STAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

49 Case No. 55 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005382AM25 RA File Number 09AX04000350 AM24 Licence No and Date 0911005433/18/07/2023

Sl No Item of Export Quantity Item of Import& quantity applied Quantity & wastage to be allowed 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 458.64 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 182 NOS GRADE: 10705BA, SIZE: 86X146, 73X125, MM.

QTY: 5460.00 KGS 3262.90 KGS INCLUSIVE OF 611.43% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 200.85 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 309 NOS GRADE: 10705BU, SIZE: 40X154, 42X281, 36X283, 33X265, 29X245, MM

QTY: 2564.70 KGS 1535.72 KGS INCLUSIVE OF 664.61% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

3 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 296.66 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 326 NOS GRADE: 10705MBU, SIZE: 29X115, 67X146, 41X89 MM.

QTY: 3618.60 KGS 2163.60 KGS INCLUSIVE OF 629.32% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT

AND INVOICES) 326 NOS GRADE: 10705MBU, SIZE: 29X115, 67X146, 41X89 MM.

QTY: 3618.60 KGS 2163.60 KGS INCLUSIVE OF 629.32% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED STAINLESS-STEEL BARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 56 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005381AM25 RA File Number 09AX04000422 AM24 Licence No and Date 0911005597/08/08/2023 comments of the Consultant (SKB) dated 26.02.2026, as under:

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 111.60 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 186 NOS GRADE: 10705BU, SIZE: 36X283, MM

QTY: 1488.00 KGS 892.02KGS INCLUSIVE OF 699.30% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 1284.80 REFLECTED IN THE SHIPPING BILLS AND GRADE: 10705MBU, SIZE: 48X87, 74X123, 58X122, 41X89, 48X111, 48X200, 42X167, 40X154, 49X73, MM 8714.67KGS INCLUSIVE OF 578.29% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 1460NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

7KGS INCLUSIVE OF 578.29% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 1460NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

51 INVOICES)

QTY: 14600.00 KGS

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 57 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005380AM25 RA File Number 09AX04000449 AM24 Licence No and Date 0911005691/28/08/2023

Sl No Item of Export Quantity Item of Import& quantity applied Quantity& wastage to be allowed. STAINLESS STEEL BARS, GRADE: 10705BA-ST SIZE: 33X52, 47X75, 55X90, 77X106, 33X49, 46X74, 52X89, 60X95, 54X73, 39X59, 75X96, MM

1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 5,491.20 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 4576 NOS 22299.21 KGS INCLUSIVE OF 306.09% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

22299.21 KGS INCLUSIVE OF 306.09% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

52 QTY: 37294.40 KGS 2 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 528.36 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1554 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 33X52, 40X62, MM

QTY: 4662.00 KGS 2806.38 KGS INCLUSIVE OF 431.15% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

3 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 1,009.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 2018 NOS STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 39X63, 40X62, 40X68, 33X49, 40X61, MM QTY: 9081.00 KGS 5469.59 KGS INCLUSIVE OF 442.08% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 4 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 1152.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1600 NOS STAINLESS STEEL BARS, GRADE: MTB10AAM, SIZE: 43X62, 40X68, 36X58, 39X63, 43X71, 33X49, 68X111, 61X98, 53X82, 46X72, MM QTY: 8640.00 KGS 5179.05 KGS INCLUSIVE OF 349.57% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

GRADE OF THE EXPORT PRODUCT.

Case No. 58 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ORT PRODUCT.

GRADE OF THE EXPORT PRODUCT.

Case No. 58 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

53 Meeting Number and Date HQ File Number HQRNORM REVIW00005379AM25 RA File Number 09AX04000521 AM24 Licence No and Date 0911005779/07/09/2023

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGETO BE ALLOWED 1 TURBINE BLADES, NET SHALL BE 1424.10 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 606 NOS STAINLESS STEEL BARS, GRADE: 10705BA, SIZE: 73X118, 68X119, 64X107, 59X109, MM

QTY: 11847.30 KGS 7120.50 KGS INCLUSIVE OF 400% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE BLADES, NET SHALL BE 936.24 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 996 NOS STAINLESS STEEL BARS, GRADE: 10705BA-ST, SIZE: 33X49, 46X74, 55X90, 52X89, 60X95, MM

QTY: 7270.80 KGS 4364.28KGS INCLUSIVE OF 366.15% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

3 TURBINE BLADES, NET SHALL BE 382.80 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 1160 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 36X283, 40X62, MM

QTY: 3190.00 KGS 2169.71 KGS INCLUSIVE OF 466.80% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT STAINLESS STEEL BARS, GRADE, GRADE: 10705MBU, SIZE: 56X104, 46X105, 43X109, 41X78, 58X122,

VE OF 466.80% WASTAGEON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT STAINLESS STEEL BARS, GRADE, GRADE: 10705MBU, SIZE: 56X104, 46X105, 43X109, 41X78, 58X122, 48X111, 45X100, 41X89, 65X113, 56X106, 36X116, 33X52, 40X62, 40X61, MM 4 TURBINE BLADES, NET SHALL BE 2953.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 3210 NOS 14660.87 KGS INCLUSIVE OF 396.44% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

QTY: 24396.00 KGS 5 TURBINE BLADES, NET SHALL BE 644.10 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 678 NOS STAINLESS STEEL BARS, GRADE: MTB10AAM, SIZE: 40X68, 33X52, 68X111, 61X110, 53X82, 46X72, 43X62, MM

QTY: 4203.60 KGS 2511.09 KGS INCLUSIVE OF 289.86% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 59 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005377AM25 RA File Number 09AX04000562 AM24 Licence No and Date 0911005913/09/10/2023

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED TURBINE BLADES, Grade: 10705BA (NET STAINLESS STEEL BARS, 2900.68 KGS INCLUSIVE OF 575.96% WASTAGE 1 144 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

E ALLOWED TURBINE BLADES, Grade: 10705BA (NET STAINLESS STEEL BARS, 2900.68 KGS INCLUSIVE OF 575.96% WASTAGE 1 144 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

55 CONTENT OF IMPORT ITEM SHALL BE 429.12 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

GRADE: 10705BA, SIZE: 86X146, 118X175 MM

QTY: 4860.00 KGS ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE
BLADES, Grade: 10705BU (NET CONTENT OF IMPORT ITEM SHALL BE 631.39 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES)

613 NOS GRADE: 10705BU, SIZE: 42X167, 40X154, 42X281, 36X283, 33X265, 29X245, 48X181, MM

QTY: 6957.55KGS 4149.37 KGS INCLUSIVE OF 557.18% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

3 TURBINE BLADES Grade: 10705MBU (NET CONTENT OF IMPORT ITEM SHALL BE 1261.60 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1328 NOS GRADE: 10705MBU, SIZE: 29X115, 74X123, 65X113, 67X123, 48X97, 67X146, 56X106, 61X106, 41X89, 48X111, MM

QTY: 14873.60 KGS 8885.70 KGS INCLUSIVE OF 604.32% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 60 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

CHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 60 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

56 Meeting Number and Date HQ File Number HQRNORM REVIW00005378AM25 RA File Number 09AX04000561 AM24 Licence No and Date 0911005912/09/10/2023

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 2196.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1830 NOS STAINLESS STEEL BARS, GRADE: 17-4PH - 140 RCS

QTY: 10065.00 KGS 5982.56 KGS INCLUSIVE OF 172.43% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 8424.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 6480 NOS STAINLESS STEEL BARS, GRADE: (ST T17 / 13W- 120X60, 100X48, 72X38, 78X42, 90X42, 78X40, 86X48, 146X80 )

QTY:31233.60 KGS 18619.57 KGS INCLUSIVE OF 121.03% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

GRADE OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NCLUSIVE OF 121.03% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

GRADE OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

57 Case No. 61 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005376AM25 RA File Number 09AX04000612 AM24 Licence No and Date 0911005977/13/10/2023

QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM ALUMINIUM PLATE GRADE: 2124), NET CONTENT OF IMPORT ITEM SHALL BE 657.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 1240 NOS ALUMINIUM PLATE, GRADE: 2124.

QTY: 6448.00 KGS 5701.60 KGS INCLUSIVE OF 767.56% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ALUMINIUM PLATE IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED ALUMINIUM PLATE SHOULD BE MATCHED WITH THE GRADE OF THE ALUMINIUM PLATE OF THE EXPORT PRODUCT.

Case No. 62 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

THE ALUMINIUM PLATE OF THE EXPORT PRODUCT.

Case No. 62 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

58 Meeting Number and Date HQ File Number HQRNORM REVIW00005373AM25 RA File Number 09AX04000639 AM24 Licence No and Date 0911006028/18/10/2023

Submit quantity and finish weight of each aircraft component to be manufactured from imported aluminium castings and bars. 1. Coloured drawing of the Precision Components, which indicates the weight of raw material and the finished product. 2. Size and shape of the Aluminium Casting and Aluminium Bars. 3. Test Mill Certificate of the grade and chemical composition of the imported Aluminium castings and Aluminium Bars. 4. Starting from the specification of the export product, basic calculation as to how the raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing, with complete justification, which documentary evidence/drawings, etc should support. 5. Case stands deferred.

Case No. 63 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005374AM25 RA File Number 09AX04000640 AM24 Licence No and Date 0911006026/18/10/2023

ITEM OF IMPORT & QUANTITY & WASTAGE QUANTITY UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

File Number 09AX04000640 AM24 Licence No and Date 0911006026/18/10/2023

ITEM OF IMPORT & QUANTITY & WASTAGE QUANTITY UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

59 QUANTITY APPLIED TO BE ALLOWED

TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 11,176.80 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 27942 NOS GRADE: CB-403- 60 MM

QTY: 62869.50 KGS 37442.28KGS INCLUSIVE OF 235% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEELIN THE EXPORT PRODUCT.

TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 4,450.95 REFLECTED IN THE SHIPPING BILLS AND INVOICES) 5495 NOS GRADE: CB-403- 85 MM,

QTY: 19782.00 KGS 11759.41KGS INCLUSIVE OF 164.20% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 5,802.36 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 1603 NOS GRADE: GTD-450 -100MM RCS

QTY: 24365.60 KGS 14489.65KGS INCLUSIVE OF 149.72% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 1,032.00 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 600 NOS GRADE: GTD-450 -150MM RCS.

QTY: 4800.00 KGS 2853.07 KGS INCLUSIVE OF 176.46% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

S AND INVOICE) 600 NOS GRADE: GTD-450 -150MM RCS.

QTY: 4800.00 KGS 2853.07 KGS INCLUSIVE OF 176.46% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 6,439.48 REFLECTED IN THE SHIPPING BILLS AND INVOICE) 8702 NOS GRADE: GTD-450 -70 MM,

QTY: 32632.50 KGS 19407.35KGS INCLUSIVE OF 201.38% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE GRADE UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

60 OF THE EXPORT PRODUCT.

Case No. 64 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005375AM25 RA File Number 09AX04000638 AM24 Licence No and Date 0911006027/18/10/2023

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT, (MADE FROM STEEL CASTING- PN-70720602-113, GRADE: 17-4PH) NET CONTENT OF IMPORT ITEM SHALL BE 1740.00 KGS, WHICH SHOULD BE REFLECTED AND INVOICE. 232 NOS STEEL CASTING, - PN - 70720602-113 (GRADE: 17- 4PH)

QTY: 2552.00 KGS 2549.20 KGS INCLUSIVE OF 46.50% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STEEL CASTINGS IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STEEL CASTINGSSHOULD BE MATCHED WITH THE GRADE OF THE STEEL CASTINGS OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED STEEL CASTINGSSHOULD BE MATCHED WITH THE GRADE OF THE STEEL CASTINGS OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 65 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005372AM25 RA File Number 09AX04000670 AM24 Licence No and Date 0911006079/25/10/2023 comments of Consultant (SKB) dated 02.03.2026, as under:

Sl No Item of Export Quantity Item of Import & quantity applied Quantity to be allowed 1 OIL AND GAS DRILLING EQUIPMENT (MADE FROM TITANIUM ROUND BAR) (NET CONTENT OF IMPORT ITEM SHALL BE 1320.00 KGS,
WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 33 NOS TITANIUM ROUND BAR, (GRADE: TI6AL6V2SN, SIZE:103X1700 MM)

QTY: 2112.00 KGS 2046.00KGS INCLUSIVE OF 55.0% ON THE NET WEIGHT OF THE IMPORTED TITANIUM ROUND BARS IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED TITANIUM BARS SHOULD BE MATCHED WITH THE GRADE OF THE TITANIUM OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

CT.

NOTE: THE GRADE OF IMPORTED TITANIUM BARS SHOULD BE MATCHED WITH THE GRADE OF THE TITANIUM OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 66 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005369AM25 RA File Number 09AX04000708 AM24 Licence No and Date 0911006157/07/11/2023

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT, MADE FROM ALUMINIUM BAR, GRADE: 6061 (NET CONTENT OF IMPORT ITEM SHALL BE 718.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 3591 NOS ALUMINIUM BAR(GRADE: 6061)

QTY: .8259.30 KGS 6841.21KGS INCLUSIVE OF 852.55%WASTAGE THE IMPORTED ALUMINIUM BARS IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED ALUMINIUM BARSSHOULD BE MATCHED WITH THE GRADE OF THE ALUMINIUM OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE OF IMPORTED ALUMINIUM BARSSHOULD BE MATCHED WITH THE GRADE OF THE ALUMINIUM OF THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 67 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00005370AM25 RA File Number 09AX04000707 AM24 Licence No and Date 0911006155/07/11/2023

QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 207.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 138 NOS STAINLESS STEEL BARS, GRADE: 10705BA SIZE: 73X118, 75X160, 118X175 MM

QTY: 3415.50 KGS 2055.78 KGS INCLUSIVE OF 893.13% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 362.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 362 NOS STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 40X154, 42X281, 36X283, 33X265, 29X245, 42X167, MM

QTY:3258.00 KGS 1962.33 KGS INCLUSIVE OF 442.08% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 2,155.02 KGS, STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 78X131, 74X130, 80X135, 15038.02 KGS INCLUSIVE OF 597.86% WASTAGE THE IMPORTED 3 2199 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

S, GRADE: 10705MBU, SIZE: 78X131, 74X130, 80X135, 15038.02 KGS INCLUSIVE OF 597.86% WASTAGE THE IMPORTED 3 2199 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

64 WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 83X141, 66X112, 67X156,114X336, 63X109, 65X107, 78X135, 106X157, 106X166, 56X106, 48X97, 54X108, 58X130, 61X110, 48X116, 58X94, 70X94, 94X170, 48X85, 55X90, 90X173, 56X82, 83X159

QTY:25178.55KGS STAINLESS STEEL IN THE EXPORT PRODUCT.

GRADE OF THE EXPORT PRODUCT.

Case No. 68 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005371AM25 RA File Number 09AX04000706 AM24 Licence No and Date 0911006154/07/11/2023

QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED TURBINE BLADES, STAINLESS STEEL BARS, 9320.45KGS INCLUSIVE 1 1936 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED TURBINE BLADES, STAINLESS STEEL BARS, 9320.45KGS INCLUSIVE 1 1936 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

65 (NET CONTENT OF IMPORT ITEM SHALL BE 2,284.48 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES). GRADE: 10705BA-ST SIZE: 55X90, 54X73, 39X59, 46X74, 53X102 MM

QTY: 15584.80 KGS OF 307.99% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 124.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES). 200 NOS GRADE: 10705BU, SIZE: 43X71, MM

QTY: 1100.00 KGS 662.26 KGS INCLUSIVE OF 434.08% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

3 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 242.40 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES). 404 NOS GRADE: 10705MBU, SIZE: 40X68, MM

QTY: 1898.80 KGS 1139.33KGS INCLUSIVE OF 370.02% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 4 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 547.76 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES). 668 NOS GRADE: MTB10AAM, SIZE: 55X90, 66X94, 40X68, MM

QTY: 4996.64KGS 3010.49KGS INCLUSIVE OF 449.60% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

3010.49KGS INCLUSIVE OF 449.60% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

66 GRADE OF THE EXPORT PRODUCT.

Case No. 69 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005368AM25 RA File Number 09AX04000770 AM24 Licence No and Date 0911006274/22/11/2023

QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY TO BE ALLOWED 1 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR GRADE: 10705BA- ST) (NET CONTENT OF IMPORT ITEM SHALL BE 960.00 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES). 240 NOS STAINLESS STEEL BARS, GRADE: 10705BA-ST SIZE: 75X96 MM.

QTY: 6648.00 KGS

3976.90 KGS INCLUSIVE OF 314.26% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

GRADE OF STEEL OF THE EXPORT PRODUCT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

USIVE OF 314.26% WASTAGE THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

GRADE OF STEEL OF THE EXPORT PRODUCT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 70 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name QNQ DESIGN AND DEVELOPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005292AM25 RA File Number 05AX04002450 AM24 Licence No and Date 0511022712/15/12/2023

Case No. 71 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008568AM24 RA File Number 06AX04000331 AM24 Licence No and Date 0611002503/14/02/2024

Sl No Item of Export Quantity Item of Import Quantity to be allowed Night Rifle Scope comprising of Night Vision Monocular, Red Dot Sight with accessories as per list Image Intensifier TubeResolution: 64 Ip/mm (min), SNR: 28 (min}, FOM: 1800 {min), HALO: 0.8mm {max), Low Battery Indicator: Yes, IR Indicator: Yes, Focus Range: 25cm to 1 195 NOS WASTAGE @1% ON THE NET PIECES OF IMAGE INTENSIFIER TUBES, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 NOS WASTAGE @1% ON THE NET PIECES OF IMAGE INTENSIFIER TUBES, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

68 infinity, Diopter Range: -6 to +4, Operating Temp.: -46 C to +55 C, Storage Temp.: -46 C to +71 C,

lunette de tir de nuit pour arme de calibre 5.56 mm 7.62 mm, with spares and accessories Red Dot SightWeight: = 3 Kg, Reticle Type: >= 35 MOA circle and 3 MOA Dot, Size (Without mount-Accessories): 260x150x30 mm, Power Source: Rechargeable Battery, Battery Life: >= 1000 Hours, Brightness Adjustment: 8 Steps for Day 3 Steps for Night WASTAGE @1% ON THE NET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Thermal Imaging Core, Spectral Range: 7-13.5 micrometers, Detector Resolution: = 640 X480 Pixels, Digital Zoom: X2, X4 or Better, Polarity: White- Hot/Black Hot/ Fire/Iron/ Sepia, Power Source: Rechargeable Battery, Display Type: LED/AMOLED WASTAGE @1% ON THE NET PIECES OF THERMAL IMAGING CORE, AS PER SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Red Dot Sight, Weight: = 3 Kg, Reticle Type: >= 35 MOA circle and 3 MOA Dot, Size (Without mount-Accessories): 260x150x30 mm, Power Source: Rechargeable Battery, Battery Life: >= 1000 Hours, Brightness Adjustment: 8 Steps for Day 3 Steps for Night WASTAGE @1% ON THE NET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Laser Range Finder, Power, Source: Rechargeable Battery, Battery Life: >= 3000 Fires, Range: 2000m, Accuracy:+-

ET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Laser Range Finder, Power, Source: Rechargeable Battery, Battery Life: >= 3000 Fires, Range: 2000m, Accuracy:+- 1m, DMC: Yes, In-built, Laser: Visible for Zeroing Invisible for LRF fire, LRF Laser Class:Class-1,Display :OLED, Mounting:MIL-STD-1913 Complaint Picatinny Rail WASTAGE @1% ON THE NET PIECES OF LASER RANGE FINDER, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Mount 50 Cal Range Drum with Modified Arm and Rail Mount PN 23506, Weight: 1.65 kg, NSN: 1240-99- 453-6634, Pt No 3649, LNA: L8A1, Rail Qty: 3, Rail Type: Mil Std 1913 Picatinny WASTAGE @0% ON THE NET PIECES OF MOUNT 50 CAL RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23506, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. Mount MK19 Range Drum with Modified Arm and Rail Mount PN 23374, Weight: 1.6 kg, NSN:1010-99- 484-3489, Part No.3805, LNA:L9A1, Weapon Fit: HK GMG 40mm, Mounting Method: Mil Std 1913 Picatinny, Rail Qty:3, Rail Type: Mil Std 1913 Picatinny, Elevation Lock: Yes, Range: 0m - 2000m WASTAGE @0% ON THE NET PIECES OF Mount MK19 Range Drum with Modified Arm and Rail Mount PN 23374, AS PER SPECIFICATION GIVEN IN THE ITEM OF IMPORT. 2 Aiming system comprising of Thermal Imaging Device, Laser Range Finder, Red Dot Sight with accessories as per list systeme de visee pour LG MK 19, with spares and accessories 114 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

inder, Red Dot Sight with accessories as per list systeme de visee pour LG MK 19, with spares and accessories 114 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

69 Mount 3 Lever Clamp PN 3645, Weight: 0.84 kg, NSN: 1240-99-616- 7816, Pt No: 3645, Weapon Fit: .50in HMG (M2), .50in HMG (QCB), 40mm Mk19 Grenade Machine Gun, Rail Qty:1, Rail Type: Mil Std 1913 Picatinny, Rail Length: 205mm WASTAGE @0% ON THE NET PIECES OF Mount 3 Lever Clamp PN 3645, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT.

Case No. 72 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008625AM24 RA File Number 06AX04000332 AM24 Licence No and Date 0611002512/16/02/2024

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY TO BE ALLOWED IMAGE INTENSIFIER TUBE, RESOLUTION: 64 IP/MM (MIN), SNR: 28 (MIN}, FOM: 1800 {MIN), HALO: 0.8MM {MAX), LOW BATTERY INDICATOR: YES, IR INDICATOR: YES, FOCUS RANGE: 25CM TO INFINITY, DIOPTER RANGE: -6 TO +4, OPERATING TEMP.: -46 C TO +55 C, STORAGE TEMP.: -46 C TO +71 C

WASTAGE @1% ON THE NET PIECES OF IMAGE INTESIFIER TUBES, AS PER SPECIFICATION GIVEN IN THE ITEM OF IMPORT. RED DOT SIGHT, WEIGHT: = 3 KG, RETICLE TYPE: >= 35 MOA CIRCLE AND 3 MOA DOT, SIZE (WITHOUT MOUNT-ACCESSORIES): WASTAGE @0.33% ON THE NET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. 1 NIGHT RIFLE SCOPE COMPRISING OF NIGHT VISION MONOCULAR, RED DOT SIGHT WITH ACCESSORIES AS PER

.33% ON THE NET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. 1 NIGHT RIFLE SCOPE COMPRISING OF NIGHT VISION MONOCULAR, RED DOT SIGHT WITH ACCESSORIES AS PER LIST LUNETTE DE TIR DE NUIT POUR ARME DE CALIBRE 5.56MM 7.62MM, WITH SPARES AND ACCESSORIES 300 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

70 260X150X30 MM, POWER SOURCE: RECHARGEABLE BATTERY, BATTERY LIFE: >= 1000 HOURS, BRIGHTNESS ADJUSTMENT: 8 STEPS FOR DAY 3 STEPS FOR NIGHT THERMAL IMAGING CORE, SPECTRAL RANGE: 7-13.5 MICROMETERS, DETECTOR RESOLUTION: = 640 X480 PIXELS, DIGITAL ZOOM: X2, X4 OR BETTER, POLARITY: WHITE- HOT/BLACK HOT/ FIRE/IRON/ SEPIA, POWER SOURCE: RECHARGEABLE BATTERY, DISPLAY TYPE: LED/AMOLED WASTAGE @1% ON THE NET PIECES OF THERMAL IMAGING CORE, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. RED DOT SIGHT, WEIGHT: = 3 KG, RETICLE TYPE: >= 35 MOA CIRCLE AND 3 MOA DOT, SIZE (WITHOUT MOUNT-ACCESSORIES): 260X150X30 MM, POWER SOURCE: RECHARGEABLE BATTERY, BATTERY LIFE: >= 1000 HOURS, BRIGHTNESS ADJUSTMENT: 8 STEPS FOR DAY 3 STEPS FOR NIGHT WASTAGE @0.5% ON THE NET PIECES OF RED DOT SIGHT, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. LASER RANGE FINDER, POWER, SOURCE: RECHARGEABLE BATTERY, BATTERY LIFE: >= 3000 FIRES, RANGE: 2000M, ACCURACY:+-1M, DMC: YES, IN- BUILT, LASER: VISIBLE FOR ZEROING INVISIBLE FOR LRF FIRE, LRF LASER CLASS:CLASS- 1,DISPLAY :OLED, MOUNTING:MIL-STD-1913 COMPLAINT PICATINNY RAIL WASTAGE @0.5% ON THE NET

1M, DMC: YES, IN- BUILT, LASER: VISIBLE FOR ZEROING INVISIBLE FOR LRF FIRE, LRF LASER CLASS:CLASS- 1,DISPLAY :OLED, MOUNTING:MIL-STD-1913 COMPLAINT PICATINNY RAIL WASTAGE @0.5% ON THE NET PIECES OF
LASER RANGE FINDER, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. MOUNT 50 CAL RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23506, WEIGHT: 1.65 KG, NSN: 1240-99-453-6634, PT NO 3649, LNA: L8A1, RAIL QTY: 3, RAIL TYPE: MIL STD 1913 PICATINNY WASTAGE @0% ON THE NET PIECES OF
MOUNT 50 CAL RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23506, AS PER SPECIFICATION GIVEN IN THE ITEM OF IMPORT. MOUNT MK19 RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23374, WEIGHT: 1.6 KG, NSN:1010-99-484-3489, PART NO.3805, LNA:L9A1, WEAPON FIT: HK GMG 40MM, MOUNTING METHOD: MIL STD 1913 PICATINNY, RAIL QTY:3, RAIL 2 AIMING SYSTEM COMPRISING OF THERMAL IMAGING DEVICE, LASER RANGE FINDER, RED DOT SIGHT WITH ACCESSORIES AS PER LIST SYSTEME DE VISEE POUR LG MK 19, WITH SPARES AND ACCESSORIES 400 NOS WASTAGE @0% ON THE NET PIECES OF
MOUNT MK19 RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23374, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

UNT MK19 RANGE DRUM WITH MODIFIED ARM AND RAIL MOUNT PN 23374, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

71 TYPE: MIL STD 1913 PICATINNY, ELEVATION LOCK: YES, RANGE: 0M - 2000M MOUNT 3 LEVER CLAMP PN 3645, WEIGHT: 0.84 KG, NSN: 1240-99- 616-7816, PT NO: 3645, WEAPON FIT: .50IN HMG (M2), .50IN HMG (QCB), 40MM MK19 GRENADE MACHINE GUN, RAIL QTY:1, RAIL TYPE: MIL STD 1913 PICATINNY, RAIL LENGTH: 205MM WASTAGE @0%ON THE NET PIECES OF MOUNT 3 LEVER CLAMP PN 3645, AS PER THE SPECIFICATION GIVEN IN THE ITEM OF IMPORT.

Case No. 73 / NC/1/MEET/Jan/202526/16 Case Status Case Rejected Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008682AM24 RA File Number 03AX04004509 AM24 Licence No and Date 0311031372/21/02/2024 The Committee considered the case as per agenda and noted that the firm vide its letter dated 14.05.24 has intimated that it has surrendered the Advance Authorization. Hence, the Committee decided to close the case showing it as “rejected”.

Case stands rejected.

Case No. 74 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008909AM24 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

proved Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008909AM24 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

72 RA File Number 03AX04005556 AM24 Licence No and Date 0311031761/05/03/2024 comments of DPIIT dated 23.02.2026, as under:

Net weight of export items at SI.No. 1 & 2 may be specified as 9165.40 MT & 14.804 MT respectively 1. Import items at SI.No. 1 to 16, 20, 24 & 26 to 30 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and their quantities may be allowed inclusive of 1.5%wastage on net content basis as claimed by the firm. 2. Quantity of import items at SI.No. 17 to 19, 21 to 23, 25 & 31 to 33 may be allowed on net to net basis with accountability clause for export item at SI.No.1. 3. Import items at SI. No.34 to 39 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and their quantities may be allowed as1.02 Kgs/Kg content in the export item at SI.No.1. 4. Import item at SI. No.40 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1.05 Kgs/Kg content in the export item at SI.No.1. 5. Import items at SI. No.41 to 46 shall be of relevant grade and size as contained/utilized in the export item at SI.No. 2 and their quantities may be allowed as1.02Kgs/Kg content in the export item at SI.No.2. 6. Import item at SI.

all be of relevant grade and size as contained/utilized in the export item at SI.No. 2 and their quantities may be allowed as1.02Kgs/Kg content in the export item at SI.No.2. 6. Import item at SI. No.47 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 1.05Kgs/Kg content in the export item at SI.No.2. 7.

Case No. 75 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005361AM25 RA File Number 09AX04000069 AM25 Licence No and Date 0911007191/07/05/2024

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

73 QUANTITY ITEM OF IMPORT&QUANTITY APPLIED QUANTITY &WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 5,040.00 KGS. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 840 NOS STAINLESS STEEL BARS. GRADE: X21CRMOV12-1 SIZE: 102X72, 150X102, MM

41580.00 KGS 24987.31 KGS INCLUSIVE OF 395.78% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 76 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name PARVEEN INDUSTRIES PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000699AM25 RA File Number 03AX04000698 AM25 Licence No and Date 0311033819/14/05/2024

Case No. 77 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name

te HQ File Number HQRNORM APPLY 00000699AM25 RA File Number 03AX04000698 AM25 Licence No and Date 0311033819/14/05/2024

Case No. 77 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name FIUNEX CONSULTANTS PRIVATE LIMITED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

74 Meeting Number and Date HQ File Number HQRNORM REVIW00005169AM25 RA File Number 31AX04000015 AM25 Licence No and Date 3111003492/06/06/2024 comments of DPIIT dated 23 .02.2026, as under:

For Export item at Sl.No. 1 Quantity of import items at Sl.No. 1 may be allowed as 1.02 Mtr./mtr. content in the export item. 1. Quantity of import item at Sl.No. 2 may be allowed on net to net basis. 2. Quantity of import item at Sl.No.3 may be allowed on net to net with accountability clause . 3.

For Export item at Sl.No. 2 Quantity of import items at Sl.No. 4 may be allowed as 1.02 Mtr./mtr. content in the export item. 1. Quantity of import items at Sl.No.5 & 6 may be allowed on net to net with accountability clause . 2. Import item at Sl. No. 7 may be allowed upto 2 % of FOB value of export item. 3.

For Export item at Sl.No. 3 Quantity of import items at Sl.No. 8 may be allowed as 1.02 Mtr./mtr. content in the export item. 1. Quantity of import items at Sl.No.9,10 & 11 may be allowed on net to net with accountability clause . 2. Quantity of import items at Sl.No. 12 & 13 may be allowed on net to net basis. 3.

For Export item at Sl.No. 4 Quantity of import items at Sl.No. 14 may be allowed as 1.02 Mtr./mtr.

Quantity of import items at Sl.No. 12 & 13 may be allowed on net to net basis. 3.

For Export item at Sl.No. 4 Quantity of import items at Sl.No. 14 may be allowed as 1.02 Mtr./mtr. content in the export item. 1. Quantity of import items at Sl.No.15,16 & 17 may be allowed on net to net with accountability clause . 2. Quantity of import items at Sl.No. 18 & 19 may be allowed on net to net basis. 3. Import item at Sl. No. 20 may be allowed upto 2 % of FOB value of export item. 4.

For Export item at Sl.No. 5 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

75 Quantity of import items at Sl.No. 21 & 22 may be allowed on net to net basis. 1. Import items at Sl. No. 23 & 24 may be allowed upto 2 % of FOB value of export item. 2.

For Export item at Sl.No. 6 Quantity of import items at Sl.No. 25 & 26 may be allowed on net to net basis. 1. Import items at Sl. No. 27 & 28 may be allowed upto 2 % of FOB value of export item. 2.

Case No. 78 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001729AM25 RA File Number 08AX04000526 AM25 Licence No and Date 0811011986/03/07/2024 comments of DPIIT dated 22.12.2025, as under:

Net weight of export item may be specified as 171.771 MT. 1.

00001729AM25 RA File Number 08AX04000526 AM25 Licence No and Date 0811011986/03/07/2024 comments of DPIIT dated 22.12.2025, as under:

Net weight of export item may be specified as 171.771 MT. 1. Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item and its quantity may be allowed as 85.571 MT as 1.094 Kgs/Kg content in the export item after taking 1/3rd recovery from scrap. 2.

Case No. 79 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

76 Meeting Number and Date HQ File Number HQRNORM APPLY 00002216AM25 RA File Number 31AX04000154 AM25 Licence No and Date 3111003745/30/07/2024

Case No. 80 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002830AM25 RA File Number 05AX04001729 AM25 Licence No and Date 0511027524/03/09/2024 comments of DPIIT dated 19.02.2026, as under:

Net Weight of export item may be specified as 468 Kgs. 1. Quantity of import item may be allowed as 3414.45 Kgs. as 7.29 Kgs./Kg. content in the export item after taking 6% recovery from the scrap.
2.

Case No. 81 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name GODREJ AND BOYCE MANUFACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002856AM25 RA File Number 03AX04002664 AM25 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002856AM25 RA File Number 03AX04002664 AM25 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

77 Licence No and Date 0311036892/04/09/2024

Case No. 82 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002910AM25 RA File Number 24AX04000233 AM25 Licence No and Date 2411003834/06/09/2024 comments of DPIIT dated 23.02.2026, as under:

Quantities and net weight of export items at SI .No.1 to 9 may be specified as under: 1. Sr No. Quantity (In Nos.) Export Product Weight (Kgs) 1 123 7595.25 Kgs. 2 100 5365.9 Kgs. 3 270 3688.2 Kgs. 4 625 3515 Kgs. 5 200 807.6 Kgs. 6 171 14577.75 Kgs. 7 240 4869.6 Kgs. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

78 8 150 9163.5 Kgs. 9 301 22295.07 Kgs.

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 9568.17 Kgs. as 1.25 Kgs./Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.
Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 10358.78 Kgs. as 1.93 Kgs./Kg content in the export item at SI.No.2 after taking 20% recovery from the scrap.

ained / utilized in the export item at SI.No.2 and its quantity may be allowed as 10358.78 Kgs. as 1.93 Kgs./Kg content in the export item at SI.No.2 after taking 20% recovery from the scrap.

Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 8131.32 Kgs as 2.20 Kgs./Kg content in the export item at SI.No.3 after taking 20% recovery from the scrap.
Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 9173 Kgs as 2.60 Kgs./Kg content in the export item at SI.No.4 after taking 20% recovery from the scrap.
Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 2871.92 Kgs as 3.55 Kgs./Kg content in the export item at SI.No.5 after taking 20% recovery from the scrap.
Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 17320.59 Kgs. as 1.18 Kgs./Kg content in the export item at SI.No.6 after taking 20% recovery from the scrap.
Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 13670.88 Kgs as 2.80 Kgs./Kg content in the export item at SI.No.7 after taking 20% recovery from the scrap.

ained / utilized in the export item at SI.No.7 and its quantity may be allowed as 13670.88 Kgs as 2.80 Kgs./Kg content in the export item at SI.No.7 after taking 20% recovery from the scrap.

Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

79 SI.No.8 and its quantity may be allowed as 17580.3 Kgs as 1.91 Kgs./Kg content in the export item at SI.No.8 after taking 20% recovery from the scrap.

Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 29386.3 Kgs as 1.21 Kgs./Kg content in the export item at SI.No.9 after taking 20% recovery from the scrap.

Case No. 83 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003203AM25 RA File Number 03AX04003000 AM25 Licence No and Date 0311037300/20/09/2024

Case No. 84 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name GE INDIA INDUSTRIAL PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003419AM25 RA File Number 31AX04000219 AM25 Licence No and Date 3111003929/01/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00003419AM25 RA File Number 31AX04000219 AM25 Licence No and Date 3111003929/01/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Max.OD , Min ID ,Length & per unit wt. of EP vis a vis OD ,Length & wt of blank & % wastage on net content basis in a tabular form supported with drawings for import of tubes 1. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. The said information is required for import of tubes. 2. Case stands deferred

Case No. 85 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003436AM25 RA File Number 05AX04002086 AM25 Licence No and Date 0511028098/03/10/2024

Case No. 86 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name MASK IMPEX PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003604AM25 RA File Number 05AX04002159 AM25 Licence No and Date 0511028255/11/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00003604AM25 RA File Number 05AX04002159 AM25 Licence No and Date 0511028255/11/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Detail technical note on manufacturing process including the relevant flow sheet. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Justification for claiming nil wastage considering the process. 4.

        Case stands deferred

Case No. 87 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003919AM25 RA File Number 08AX04001276 AM25 Licence No and Date 0811013091/29/10/2024 comments of MHI dated 30.01.26, as under:

Export product: HP valve supports Unit 3 E750D51404G0 1

Wastage allowed on import item:

Import S. No. Description of imported material Net Wt. (Kg) %wastage to be allowed on net content after recovery

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Import S. No. Description of imported material Net Wt. (Kg) %wastage to be allowed on net content after recovery

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

82 1 12 THK PLATE GRADE S355J2N 282 51.65%

2 85 THK PLATE GRADE S355J2N No data Delete

3 100 THK PLATE GRADE S355J2N No data Delete

4 35THK PLATE GRADE S355J2N 866.4 13.67%

5 40 THK PLATE GRADE S355J2N 168 610.91%

6 60 THK PLATE GRADE S355J2N 432 256.91%

7 50 THK PLATE GRADE S355J2N 1056 41.75%

8 65 THK PLATE GRADE S355J2N 120 131.81%

9 90 THK PLATE GRADE S355J2N 1896 18.05%

10 145 THK PLATE GRADE S355J2N 24.95%

11 145 THK PLATE GRADE S355J2N 7032 24.95%

20 SHAPE UPE 80X50 S355J2+M 56.28 20.69%

21 SHAPE UPE 120X60 S235JR 92.32 40.75%

22 SHAPE UPE 140X65 S235JR 193.17 25.31%

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

83 23 SHAPE UPE 200X80 S235JR 2635.17 18.22%

41 3 THK PLATE GRADE S355J2+N No data Delete

Other items may be allowed as components under GN-4.

Case No. 88 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003920AM25 RA File Number 08AX04001275 AM25 Licence No and Date 0811013092/29/10/2024 comments of MHI dated 30.01.2026, as under:

Export product: HP valve supports Unit 4 E750D51404G0 1

Wastage allowed on import item:

%wastage to be allowed on net content after Import S.

ments of MHI dated 30.01.2026, as under:

Export product: HP valve supports Unit 4 E750D51404G0 1

Wastage allowed on import item:

%wastage to be allowed on net content after Import S. No. Description of imported material

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

84 recovery 1 12 THK PLATE GRADE S355J2N 51.65%

2 85 THK PLATE GRADE S355J2N Delete, No data

3 100 THK PLATE GRADE S355J2N Delete, No data

4 35THK PLATE GRADE S355J2N 13.67%

5 40 THK PLATE GRADE S355J2N 610.91%

6 60 THK PLATE GRADE S355J2N 256.91%

7 50 THK PLATE GRADE S355J2N 41.75%

8 65 THK PLATE GRADE S355J2N 131.81%

9 90 THK PLATE GRADE S355J2N 18.05%

10 145 THK PLATE GRADE S355J2N 24.95%

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

85 11 145 THK PLATE GRADE S355J2N 24.95%

20 SHAPE UPE 80X50 S355J2+M 20.69%

21 SHAPE UPE 120X60 S235JR 40.75%

22 SHAPE UPE 140X65 S235JR 25.31%

23 SHAPE UPE 200X80 S235JR 18.22%

41 3 THK PLATE GRADE S355J2+N Delete, No data

Remaining items may be allowed as components under GN-4.

Case No. 89 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003929AM25 RA File Number 31AX04000265 AM25 Licence No and Date 3111004033/29/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00003929AM25 RA File Number 31AX04000265 AM25 Licence No and Date 3111004033/29/10/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 90 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003956AM25 RA File Number 08AX04001277 AM25 Licence No and Date 0811013127/30/10/2024 comments of MHI dated 30.01.2026, as under:

Export product: HP valve supports Unit 1 & 2

Wastage allowed on import item:

Import S. No. Description of imported material %wastage to be allowed on net content after recovery

1, 42 12 THK PLATE GRADE S355J2N 51.65%

2, 43 85 THK PLATE GRADE S355J2N Delete, No data

3, 44 100 THK PLATE GRADE S355J2N Delete, No data

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

87 4, 45 35THK PLATE GRADE S355J2N 13.67%

5, 46 40 THK PLATE GRADE S355J2N 610.91%

6, 47 60 THK PLATE GRADE S355J2N 256.91%

7, 48 50 THK PLATE GRADE S355J2N 41.75%

8, 49 65 THK PLATE GRADE S355J2N 131.81%

9, 50 90 THK PLATE GRADE S355J2N 18.05%

10, 51 145 THK PLATE GRADE S355J2N 24.95%

11, 52 145 THK PLATE GRADE S355J2N 24.95%

20, 61 SHAPE UPE 80X50 S355J2+M 20.69%

21, 62 SHAPE UPE 120X60 S235JR 40.75%

22, 63 SHAPE UPE 140X65 S235JR 25.31%

23, 64 SHAPE UPE 200X80 S235JR 18.22%

41, 82 3 THK PLATE GRADE S355J2+N Delete, No data

Remaining items may be allowed as components under GN-4. UDIN00653165AM26

UPE 140X65 S235JR 25.31%

23, 64 SHAPE UPE 200X80 S235JR 18.22%

41, 82 3 THK PLATE GRADE S355J2+N Delete, No data

Remaining items may be allowed as components under GN-4. UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 91 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004569AM25 RA File Number 31AX04000300 AM25 Licence No and Date 3111004162/05/12/2024 comments of DPIIT dated 22 .01.2026, as under:

Net weight of export items at Sl.No. 1 to 15 may be specified as under: 1.

S.No. Net weight (Kgs) S.No. Net weight (Kgs) 1 48 9 11.10 2 48 10 11.10 3 48 11 11.10 4 48 12 11.10 5 48 13 11.10 6 48 14 898.80 7 48 15 1906.32 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

89 8 11.10

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.
Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.2

No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.2 4. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.3 after taking 20% recovery from the scrap. 5. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.4 6. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 134.4 Kgs as 2.08 Kgs/Kg content in the export item at SI.No.5
7. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.6 8. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 134.4 Kgs as 2.80 Kgs/Kg content in the export item at SI.No.7 9. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.8 10.

No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.8 10. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.9
11. Import item at SI No.10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.10 after taking 20% recovery from the scrap. 12. Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.11 after taking 20% recovery from the scrap. 13. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

m the scrap. 13. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

90 SI.No.12 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.12 after taking 20% recovery from the scrap. 14. Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 36.94 Kgs as 3.32 Kgs/Kg content in the export item at SI.No.13 after taking 20% recovery from the scrap. 15. Import item at SI No.14 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 1738.16 Kgs as 1.93 Kgs/Kg content in the export item at SI.No.14 after taking 20% recovery from the scrap. 16. Import item at SI No.15 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as 5089.26 Kgs as 2.66 Kgs/Kg content in the export item at SI.No.15 after taking 20% recovery from the scrap.

Case No. 92 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004863AM25 RA File Number 56AX04000395 AM25 Licence No and Date 5611003493/18/12/2024

Case No. 93 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004943AM25 RA File Number 09AX04000805 AM25

611003493/18/12/2024

Case No. 93 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004943AM25 RA File Number 09AX04000805 AM25 Licence No and Date 0911008674/20/12/2024 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE AND QUANTITY TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT. (NET CONTENT OF IMPORT ITEM SHALL BE 49.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES.) 984 NOS STAINLESS STEEL BAR, GRADE: 15-5 PH

QTY: 738 KGS 616.95 KGS INCLUSIVE OF 1153.96% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 2 PRECISION COMPONENTS FOR AIRCRAFT (NET CONTENT OF IMPORT ITEM SHALL BE 6435.00 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

1287 NOS STAINLESS STEEL PLATE, GRADE: 17-4 PH

QTY: 13127.4 KGS 11951.08 KGS INCLUSIVE OF 85.72% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT 3 PRECISION COMPONENTS FOR AIRCRAFT
(NET CONTENT OF IMPORT ITEM SHALL BE 551.00 REFLECTED IN THE SHIPPING BILLS AND INVOICES)

2900 NOS STAINLESS STEEL BAR, GRADE: 410

QTY: 6960 KGS 5833.64 KGS INCLUSIVE OF 958.74% WASTAGE ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT PRECISION COMPONENTS FOR AIRCRAFT (NET CONTENT OF IMPORT ALLOY STEEL, GRADE: E8740

212.80 KGS INCLUSIVE OF 88.32% WASTAGE ON THE NET WEIGHT 4 2260 NOS UDIN00653165AM26

E EXPORT PRODUCT PRECISION COMPONENTS FOR AIRCRAFT (NET CONTENT OF IMPORT ALLOY STEEL, GRADE: E8740

212.80 KGS INCLUSIVE OF 88.32% WASTAGE ON THE NET WEIGHT 4 2260 NOS UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

92 ITEM SHALL BE 113.00 REFLECTED IN THE SHIPPING BILLS AND INVOICES) QTY: 226 KGS OF THE IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STAINLESS/ALLOY STEEL BARS SHOULD BE MATCHED WITH THE GRADE OF STAINLESS/ALLOY STEEL OF THE EXPORT PRODUCT.

Case No. 94 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name MINDRILL SYSTEMS & SOLUTIONS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004939AM25 RA File Number 02AX04000570 AM25 Licence No and Date 0211007791/20/12/2024

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES VARIOUS ALUMINIUM TUBES INCLUDING BUT NOT LIMITED TO EXTRUDED ALUMINIUM TUBE, ALLOY: EN-AW 7075, EN-AW 6063 AND EN-AW 6005 TEMPER: T6 (ACC. TO DIN EN 573-3, EN 754-1,2 AND 7)

1 ALUMINIUM FEED CYLINDERS.

4117.647 KGS 6787.00 KGS INCLUSIVE OF 64.83% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

4117.647 KGS 6787.00 KGS INCLUSIVE OF 64.83% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

93 QTY: 7000.00 KGS 2 PISTON RODS OR SIMILAR COMPONENTS.

3378.378KGS STAINLESS STEEL SEAMLESS PIPES: VARIOUS GRADES OF STEEL TUBES, INCLUDING BUT NOT LIMITED TO SS 304, SS308, SS316

QTY: 5000.00 KGS 4684.45 KGS INCLUSIVE OF
38.66% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

3 PISTON RODS OR SIMILAR COMPONENTS. 3378.378KGS STAINLESS STEEL SEAMLESS TUBES, PIPES CHROME OR NON- CHROME PLATED. ST52, SAE4140

QTY: 5000.00 KGS 4684.45 KGS INCLUSIVE OF
38.66% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

4 BUSH, LINER, CHUCK INSERT OR SIMILAR COMPONENT 3125.00 KGS TOOL AND DIE STEEL VARIOUS TOOL AND DIE STEEL INCLUDING BUT NOT LIMITED TO DC53, H13, A2, M2

10000.00 KGS 8148.17 KGS INCLUSIVE OF
160.74% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

5 LINER, BUSH, GUIDE, GUIDE BUSH, DRIVER OR SIMILAR ITEMS.

800.00 KGS

COPPER-BASED ALLOY VARIOUS COPPER BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 4000.00 KGS 3909.82 KGS INCLUSIVE OF 388.72% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

6 LINER, BUSH, GUIDE, GUIDE BUSH, DRIVER OR SIMILAR ITEMS.

800.00 KGS COPPER ALLOY TUBES AND PIPES VARIOUS COPPER BASED ALLOYS INCLUDING BUT NOT

E ITEM OF IMPORT IN THE EXPORT PRODUCT

6 LINER, BUSH, GUIDE, GUIDE BUSH, DRIVER OR SIMILAR ITEMS.

800.00 KGS COPPER ALLOY TUBES AND PIPES VARIOUS COPPER BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 4000.00 KGS 3909.82 KGS INCLUSIVE OF 388.72% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

7 PISTON RODS OR SIMILAR COMPONENTS.

3378.378 KGS PISTON ROD HARD CHROME PLATED TUBE ST52, SAE4140 5000.00 KGS 4684.45 KGS INCLUSIVE OF
38.66% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

94 8 MACHINED AND HIGH- PRECISION COPPER-BASED ALLOY COMPONENTS FOR MINING & CONSTRUCTION EQUIPMENT OR SIMILAR

2173.913 KGS COPPER-BASED ALLOY VARIOUS COPPER BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 5000.00 KGS 4203.55 KGS INCLUSIVE OF
93.36% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

9 MACHINED AND HIGH- PRECISION COPPER-BASED ALLOY COMPONENTS FOR MINING & CONSTRUCTION EQUIPMENT OR SIMILAR

2873.563 KGS COPPER-BASED ALLOY VARIOUS COPPER-BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 5000.00 KGS 4400.00 KGS INCLUSIVE OF
53.12% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

NOTE:

WASTAGE ON THE NET WEIGHT OF IMPORTED ITEMS IN THE EXPORT PRODUCT.

0.00 KGS INCLUSIVE OF
53.12% WASTAGE ON THE NET WEIGHT OF THE
ITEM OF IMPORT IN THE EXPORT PRODUCT

NOTE:

WASTAGE ON THE NET WEIGHT OF IMPORTED ITEMS IN THE EXPORT PRODUCT.
THE GRADE OF THE IMPORTED ITEMS (ALUMINIUM ALLOY, STAINLESS STEEL, TOOL AND DIE STEEL, COPPER-BASED ALLOY, PISTON ROD, HARD CHROME PLATED) SHOULD MATCH THE GRADE OF ALUMINIUM ALLOY, STAINLESS STEEL, TOOL AND DIE STEEL, COPPER-BASED ALLOY, PISTON ROD, HARD CHROME PLATED GOING IN THE EXPORT PRODUCT.

Case No. 95 / NC/1/MEET/Jan/202526/16 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004944AM25 RA File Number 09AX04000767 AM25 Licence No and Date 0911008675/20/12/2024 comments of the Consultant (SKB) dated 26.02.2026, as under:

QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY WASTAGE TO BE ALLOWED UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

95 GRADE: 10705BU, SIZE: 56X202, 106X209, 54X181, 42X167, 40X154, 90X164, 93X164, 48X181 36X245, 68X251, 78X150, MM

QTY: 16432.00 KGS 9823.90KGS INCLUSIVE OF 626.62% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

1 TURBINE BLADES, (NET CONTENT OF IMPORT ITEM SHALL BE 1352.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1040 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC)

QTY: 16432.00 KGS 1% OF THE FOB VALUE GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 29X115, MM

QTY: 12882.00 KGS 7721.08KGS INCLUSIVE OF 713.43% ON THE

QTY: 16432.00 KGS 1% OF THE FOB VALUE GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 29X115, MM

QTY: 12882.00 KGS 7721.08KGS INCLUSIVE OF 713.43% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT

2 CONTENT OF IMPORT ITEM SHALL BE 949.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES) 1356 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC)

QTY: 12882.00 KGS 1% OF THE FOB VALUE

NOTE: THE GRADE OF IMPORTED STAINLESS-STEELBARS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT PRODUCT.

Case No. 96 / NC/1/MEET/Jan/202526/16 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

96 Case Status Case Deferred Party Name TRAILER LOUAULT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005035AM25 RA File Number 31AX04000310 AM25 Licence No and Date 3111004234/24/12/2024

Case No. 97 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005074AM25 RA File Number 33AX04000101 AM25 Licence No and Date 3311002436/26/12/2024

Case No. 98 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005195AM25 RA File Number 05AX04003339 AM25 Licence No and Date 0511029962/30/12/2024

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM APPLY 00005195AM25 RA File Number 05AX04003339 AM25 Licence No and Date 0511029962/30/12/2024

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 99 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005255AM25 RA File Number 05AX04003380 AM25 Licence No and Date 0511029986/31/12/2024

by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5. Quantity of import item from Sl.No. 18 to 29 in Nos. also in addition to their weights. 6.

Case stands deferred.

Case No. 100 / NC/1/MEET/Jan/202526/16 Case Status Case Deferred Party Name FREUDENBERG GALA HOUSEHOLD PRODUCT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005338AM25 RA File Number 03AX04004523 AM25 Licence No and Date 0311040104/02/01/2025 UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

UDIN00653165AM26 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6989 --apply.