DGFT Minutes

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION) MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Jan/202526/15 DATED: 09/01/2026

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Jan/202526/15 dated 09/01/2026 of Norms Committee - I for the year 2025-26 was held on 09/01/2026 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 RANDHEEP THAKUR,Joint DGFT DGFT(HQ) 2 Ashwani Ojha,Deputy Director DGFT(HQ) 3 Kamlesh Singh,Assistant Section Officer DGFT(HQ) 4 Shaish Kumar,Technical Consultant DGFT 5 Sk Bhatnagar,Technical Consultant DGFT 6 Sushil Jain,Technical Consultant Department for Promotion of Industry & Internal Trade,Ministry of Commerce & Industry 7 Vishan Agrawal,Technical Consultant DGFT

UDIN00566753AM26 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director on 25-02-2026 14:38:15.

2 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name DEEPSEA TECHNOLOGIES (INDIA) PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 15 and 09/01/2026 HQ File Number HQRNORM APPLY 00000673AM26 RA File Number NA Licence No and Date NA

Norms Committee Decision:

Case deferred for the comments of TE.

Case No. 2 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ATHARVA FOUNDRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002709AM26 RA File Number NA Licence No and Date NA Case deferred for the DL reply of the firm.

Case No. 3 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LG ELECTRONICS INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003121AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

i) Details of the export product, including design and specifications, calculations, and brief notes on the export product as well as the import inputs. ii) Declaration as prescribed under Annexure ‘A’ to Trade Notice No. 1/06 dated 07.06.2005. UDIN00566753AM26

3 iii) Declaration as prescribed under the Annexure to Trade Notice No. 4/AM06 dated 06.07.2005. iv) Declaration as prescribed under Annexure ‘A’ to Trade Notice No. 12/AM05 dated 10.03.2005. v) Declaration as prescribed under Annexure ‘A’ to Trade Notice No. 03/AM11 dated 08.10.2010. vi) Declaration as required under Para 4.07 and Para 4.15 of the Handbook of Procedures (HBP). vii) As per Central Excise (CE) certification, the FOB value of exports for the preceding financial years is shown as Nil, whereas the application indicates an FOB value of ₹1,531.02.

cedures (HBP). vii) As per Central Excise (CE) certification, the FOB value of exports for the preceding financial years is shown as Nil, whereas the application indicates an FOB value of ₹1,531.02. The discrepancy may be clarified. viii) Production and consumption data of the manufacturer/supporting manufacturer for the preceding three licensing years, duly certified by a Chartered Accountant/Cost and Works Accountant/Jurisdictional Central Excise Authority. In cases of no past production, certification from the Jurisdictional Central Excise Authority based on production batch sheets may be submitted. Separate batch-wise records of input consumption shall be maintained for this purpose. ix) As per CE certification, the total value for the PC Notebook is indicated as ₹11,22,85,104.72 (USD 1,277,418.71), whereas the CIF value mentioned in the application is ₹11,36,90,265.56 (USD 12,77,418.71). The discrepancy may be reconciled. x) Per-unit quantity requirements for each export product as certified by CE differ from the quantities mentioned in the application. The same may be reconciled. xi) RCMC and IEM certificates, as indicated in the application, may be submitted. xii) Certificate from Chartered Accountant/Cost Accountant/Company Secretary, as prescribed under Appendix 5B, may be submitted.

Case stands deferred.

ndicated in the application, may be submitted. xii) Certificate from Chartered Accountant/Cost Accountant/Company Secretary, as prescribed under Appendix 5B, may be submitted.

Case stands deferred.

Case No. 4 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003792AM26 RA File Number NA Licence No and Date NA

Case No. 5 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003803AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and decided to ratify the ad-hoc norms against AA No. UDIN00566753AM26

4 0511004784 dated 16/09/2021 as per comments of DPIIT dated 09.01.2026, as under:

Net weight of export item may be specified as 370 MT. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as applied for i.e 1,75,000 Kgs as 1.03 Kgs/Kg content in the export item as claimed by the firm. 2. Import item at Sl.No. 2 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as applied for i.e 52,000 Kgs as 1.03 Kgs/Kg content in the export item as claimed by the firm. 3. Quantity of import item at Sl.No.3 may be allowed as 106 Nos. on net to net basis. However, the weight of this item may be allowed as 15,017 Kgs. as 1.015 Kgs/Kg content in the export item as claimed by the firm. 4. Import item at Sl.No.

owed as 106 Nos. on net to net basis. However, the weight of this item may be allowed as 15,017 Kgs. as 1.015 Kgs/Kg content in the export item as claimed by the firm. 4. Import item at Sl.No. 4 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as applied for i.e 59000 Kgs as 1.032 Kgs/Kg content in the export item as claimed by the firm. 5. Import item at SI No. 5 may be omitted as it is not used in the export item. 6. Import items at Sl.No.6 to 11 ( Welding consumables) may be allowed as 4,850 Kgs., 4,200 Kgs., 4,200 Kgs., 150 Kgs. , 320 Kgs.& 300 Kgs. respectively. 7.

RA concerned may take suitable consequential action accordingly.

Case No. 6 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003807AM26 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and decided to ratify the ad-hoc norms against AA No. 0510415637 dated 26/10/2020 as per comments of DPIIT dated 09.01.2026, as under:

Net fabricated weight of export items at Sl. No 1 may be specified as 850 MT. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 6,26,922 Kgs as 1.05 Kgs/Kg content in the export item as claimed by the firm. 2. Quantity of import item at Sl.No.2 may be allowed as 2 Nos. on net to net basis. However, the weight of this item may be allowed as 44,418 Kgs.

ntent in the export item as claimed by the firm. 2. Quantity of import item at Sl.No.2 may be allowed as 2 Nos. on net to net basis. However, the weight of this item may be allowed as 44,418 Kgs. as 1.01 Kgs/Kg content in the export item at SI.No.1 as 3. UDIN00566753AM26

5 claimed by the firm. Quantity of import item at Sl.No.3 may be allowed as 1 No. on net to net basis. However, the weight of this item may be allowed as 1668 Kgs. as 1.01 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 4. Quantity of import item at Sl.No.4 may be allowed as 2 Nos. on net to net basis. However, the weight of this item may be allowed as 868 Kgs. as 1.01 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 5. Quantity of import item at Sl.No.5 may be allowed as 1 No.( 48Kgs.) on net to net basis in the export item at SI.No.1 as claimed by the firm. 6. Import items at SI No. 6 to 10 may be omitted as not used in the export itemss. 7. Quantity of import item at Sl.No. 11 allowed as 48 Kgs. on net to net basis in the export item at SI.No.1 as claimed by the firm. 8. Quantity of import item at SI.No.12 may be allowed as 860 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 9. Import item at SI No. 13 may be omitted as it is not used in the export items. 10.

may be allowed as 860 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 9. Import item at SI No. 13 may be omitted as it is not used in the export items. 10. Import item at Sl.No.14 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 9,897 Kgs as 1.043 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 11. Import item at Sl.No.15 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 991 Kgs as 1.048 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 12. Import items at SI No. 16 &17 may be ommitted as not used in the export items. 13. Import item at Sl.No.18 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 8,857 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 14. Import item at Sl.No.19 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 8,779 Kgs as 1.046 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 15. Import item at Sl.No.20 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1,45,279 Kgs as 1.048 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 16. Quantity of import item at Sl.No.

n the export item at SI.No.1 and its quantity may be allowed as 1,45,279 Kgs as 1.048 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 16. Quantity of import item at Sl.No. 21 allowed as 6958 Kgs.( 4 Sets) on net to net basis in the export item at SI.No.1 as claimed by the firm. 17. Quantity of import item at Sl.No.22 to 25 may be allowed as 12 Nos., 24 Nos., 6 Nos., & 48 Nos., respectively on net to net basis in the export item at SI.No.1. 18. Import item at SI No.26 may be omitted as it is not used in the export items. 19. Quantity of import item at Sl.No. 27 allowed as 100 Kgs.on net to net basis in the export item at SI.No.1 as claimed by the firm. 20. Import items at SI No.28 & 29 may be omitted as not used in the export items. 21. Import item at Sl.No.30 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 6,596 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.1. 22. Import item at SI No.31 may be omitted as it is not used in the export items. 23. Import item at Sl.No.32 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e 27,500 Kgs as 1.045 Kgs/Kg
content in the export item at SI.No.1 as claimed by the firm. 24. UDIN00566753AM26

in the export item at SI.No.1 and its quantity may be allowed as applied for i.e 27,500 Kgs as 1.045 Kgs/Kg
content in the export item at SI.No.1 as claimed by the firm. 24. UDIN00566753AM26

6 Quantity of import items at Sl.No.33 to 36 ( Welding Consumables) may be allowed as applied for i.e 13,000 Kgs., 19,000 Kgs., 19,000 Kgs., & 1000 Kgs. respectively . 25. Import items at SI No.37 & 38 may be omitted as not used in the export items. 26. Import item at SI No.39 may be omitted as the import item is same as export item at SI.No.2 with no manufacturing activity. 27.

Case No. 7 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OPLUS CASTING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004528AM26 RA File Number NA Licence No and Date NA

THE DESCRIPTION OF THE EXPORT PRODUCT IS VAGUE. SUBMIT EXACT DESCRIPTION OF THE EXPORT PRODUCT. i. WHAT IS THE WEIGHT OF EACH EXPORT PRODUCT? ii. WHAT IS THE CHEMICAL COMPOSITION OF THE EXPORT PRODUCT? SUBMIT COLOURED PHOTOGRAPH OF THE EXPORT PRODUCT. iii. WHAT IS THE CHEMICAL COMPOSITION OF THE IMPORTED PIG IRON? SUBMIT THE CERTIFICATE OF THE CHEMICAL ANALYSIS. iv. SUBMIT MATERIAL BALANCING SHEET OF THE RAW MATERIALS (WEIGHT PIG IRON, MS INSERTS, STEEL SHOTS) VERSES WEIGHT OF THE EXPORT ITEMS ACCORDING TO THE CHEMICAL COMPOSITION. v.

Case No. 8 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name MAGELLAN AEROSPACE (TUMKUR) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007151AM24 UDIN00566753AM26

e No. 8 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name MAGELLAN AEROSPACE (TUMKUR) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007151AM24 UDIN00566753AM26

7 RA File Number NA Licence No and Date NA

Case No. 9 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 15 and 09/01/2026 HQ File Number HQRNORM APPLY 00004935AM26 RA File Number NA Licence No and Date 0910007668/10/10/2001 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of MHI dated 01.01.2026, as under:

Export Product: GAS TURBO GENERATOR – 2 SETS

List of Raw Materials: Item Sl. No Description of the Import Item Qty to be allowed Net Qty UOM % Wastage to be allowed on net content Remarks 209 CS/BQ PLATES /HT PLATES 220 209.5 MT 5% 210 AP PLATES 30 29.4 MT 2% 211 SS SHEETS /PLATES 40 39.21 MT 2% 212 CS PIPES 40 39.6 MT 1% 213 SS PIPES 35 34.65 MT 1% 214 W.F BEAMS 160 158.4 MT 1%

UDIN00566753AM26

220 209.5 MT 5% 210 AP PLATES 30 29.4 MT 2% 211 SS SHEETS /PLATES 40 39.21 MT 2% 212 CS PIPES 40 39.6 MT 1% 213 SS PIPES 35 34.65 MT 1% 214 W.F BEAMS 160 158.4 MT 1%

UDIN00566753AM26

8 215 SQUARES / SHEETS /WIRE 3 2.97 MT 1% 216 ROUND 70 69.3 MT 1% 219 NON FERROS PLATES 1 0.99 MT 1% 220 HRNGO /CRNGO STEEL COILS/SHEETS 240 228.5 MT 5% 221 NON-MAGNETIC STEEL ROUNDS 2 1.98 MT 1% 222 NON-MAGNETIC STEEL FLATS 4 3.96 MT 1% 223 SCRAPER FIN PROFILE 1 0.99 MT 1% 224 I-BEAMS (SPEC AA10112) 4 3.96 MT 1% 225 SILVER BEARING CU CONDUCTORS 15 14.85 MT 1% 226 WEDGE PROFILES 6 5.94 MT 1%

Taking clue from SION C-1647

Sl. Nos – 1 to 6, 8 to 69, 71 to 177, 192 to 204, 217 and 218: may be allowed as components on net to net basis under GN-4 with accountability clause. Sl. Nos – 7, 70, 178 to 191, 205 to 208: may be allowed as Consumables upto 2% of FOB value of Export Product.

Case No. 10 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001749AM26 UDIN00566753AM26

uct.

Case No. 10 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001749AM26 UDIN00566753AM26

9 RA File Number 018005001701 AM09 Licence No and Date 0410101782/22/01/2009 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed in NC-1 meeting dated 02.11.2010 taking cue from SION C-1647 as per comments of MHI dated 05.01.2026, as under: Export Product: 2 Sets Earlier Norms approved (per set) Recommendation (per set)
Item Sl. No. % wastage allowed Qty allowed % wastage Net Export weight Qty Allowed Remarks 1 3% 746 MT 3% 786.19 MT 810.50 MT 2 3% 201 MT 3% 191.58 MT 197.54 MT % wastage remains same. Change in input quantity due to design changes during execution. 3 Negligible 16 MT

Not imported May be deleted 4 Negligible 9 MT 3% 5.09 MT 5.25 MT Change in input quantity due to design changes during execution. 5 Negligible 2 MT

Not imported May be deleted 6 2%, 10% 3293 MT 4% 2940.48 MT 3063 MT 7 2%, 30% 3224 MT 4% 1323.36 MT 1378.5 MT 8 2% 117 MT 4% 35.09 MT 36.53 MT 9 2% 60.2 MT, 3000 Nos 2% 37.24 MT 38.00 MT 10 Nil 42 MT 2% 38.24 MT 39.02 MT Change in input quantity due to design changes during execution. 11,18,22, 24- 30, 32,33,41,42 Net to net components

As per AA May be allowed on net to net basis under GN-4. UDIN00566753AM26

Change in input quantity due to design changes during execution. 11,18,22, 24- 30, 32,33,41,42 Net to net components

As per AA May be allowed on net to net basis under GN-4. UDIN00566753AM26

10 12-16,19-21, 23,31,34,35, 37-40, 43-45 Net to net components

Not Imported May be deleted 17 Deleted Deleted 36 Deleted Nil 97 MT 97 MT May be allowed on net to net basis, due to the customer contract requirement of Aluminium sheets as outer casing material for boiler insulation. 46 - 74 Spares As per spare policy

Spares. As per spare policy 75 - 97 Spares As per spare policy

Not Imported May be deleted Export Product total weight: 41614 MT Export Product total weight: 33877 MT Note on Export Product weight: 15271 MT exclusive of indigenous supplies to project site before Advance Authorization date; 33877 MT inclusive of indigenous supplies to project site before Advance Authorization date.

Case No. 11 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED HQ File Number HQRNORM REVIW00001862AM26 RA File Number 018005000199 AM10 Licence No and Date 0410103657/03/04/2009 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed in NC-1 meeting dated 12.10.2010 as per comments of MHI dated 05.01.2026, as under:

Export product: 2 sets UDIN00566753AM26

red the case as per agenda and decided to modify the ad-hoc norms fixed in NC-1 meeting dated 12.10.2010 as per comments of MHI dated 05.01.2026, as under:

Export product: 2 sets UDIN00566753AM26

11

Earlier Norms approved (per set) Revised Norms (per set)

Item Sl. No. % wastage allowed Qty allowed % wastage Net Export weight Qty Allowed Remarks 1 3% 746 MT 3% 76.15 MT 78.50 MT 2 3% 201 MT 3% 163.93 MT 169 MT Change in input quantity due to design changes during execution. 3-5 negligible 27 MT

Not imported May be deleted 6 2%, 10% 3293 MT 4% 2337.12 MT 2434.50 MT 7 2%, 30% 1831 MT 4% 1462.08 MT 1523.00 MT 8 2% 117.3 4% 55.20 MT 57.50 MT 9 Nil 61 MT, 274 Nos 2% 112 Nos 112 Nos 10 Nil 42 MT 2% 0.74 MT 0.75 MT Change in input quantity due to design changes during execution. 11-12, 17,19,23,31,32,33 Net to net components Net to net components As per AA May be allowed on net to net basis under GN- 4. 13,15,16 & 20 Net to net components

Not Imported May be deleted UDIN00566753AM26

31,32,33 Net to net components Net to net components As per AA May be allowed on net to net basis under GN- 4. 13,15,16 & 20 Net to net components

Not Imported May be deleted UDIN00566753AM26

12 14,18 & 25 Deleted Deleted 21,22,24 to 30, 34 to 42 Net to net components

Not Imported May be deleted 43 to 71 Spares As per spare policy

Not Imported May be deleted Export product total weight: 41514 MT Export product total weight: 38162 MT

Note on Export Product weight: 17440 MT exclusive of indigenous supplies to project site before Advance Authorization date; 38162 MT inclusive of indigenous supplies to project site before Advance Authorization date.

Case No. 12 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED HQ File Number HQRNORM REVIW00001869AM26 RA File Number 018005000200 AM10 Licence No and Date 0410103660/03/04/2009 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed in NC-1 meeting dated 08.06.2010 as per comments of MHI dated 05.01.2026, as under:

Export Product: Total 2 sets Earlier Norms approved (per set) Revised Norms (per set)
Item Sl. No. Item description % wastage allowed Qty allowed % wastage Net Export weight Qty Allowed Remarks

Carbon steel 745.70 765.82 % wastage 1 3% 3% 789.50 MT

UDIN00566753AM26

Item Sl. No. Item description % wastage allowed Qty allowed % wastage Net Export weight Qty Allowed Remarks

Carbon steel 745.70 765.82 % wastage 1 3% 3% 789.50 MT

UDIN00566753AM26

13 plates,sheets,strips, flats, coils MT MT remains same. Change in input quantity due to design changes during execution. 2 Alloy steel plates,sheets,strips, flats, coils 3% 200.8 MT 3% 198.85 MT 205 MT % wastage remains same. Change in input quantity due to design changes during execution

Export Product weight: Earlier export product weight approved: 44970 MT

Note on Export Product weight: 29586 MT exclusive of indigenous supplies to project site before Advance Authorization date; 44303 MT inclusive of indigenous supplies to project site before Advance Authorization date.

Case No. 13 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001753AM26 RA File Number 018005000325 AM10 Licence No and Date 0410107117/21/08/2009

Case No. 14 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date UDIN00566753AM26

M10 Licence No and Date 0410107117/21/08/2009

Case No. 14 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date UDIN00566753AM26

14 HQ File Number HQRNORM REVIW00001861AM26 RA File Number 018005000336 AM10 Licence No and Date 0410107196/25/08/2009

Case No. 15 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name FITWEL GASKET COMPANY (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number 018305000619AM15 RA File Number 318304000129 AM15 Licence No and Date 3110064779/25/08/2014

Case No. 16 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002445AM25 RA File Number 039404001169 AM15 Licence No and Date 0310795103/06/04/2015

Case No. 17 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017 UDIN00566753AM26

y Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017 UDIN00566753AM26

15

Case No. 18 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005363AM25 RA File Number 092404000139 AM19 Licence No and Date 0910066427/06/07/2018 comments of Consultant (SKB) dated 02.01.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY AND WASTAGE TO BE ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 990.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS & INVOICES) 165 NOS STAINLESS STEEL BARS, SIZE: 120 RCS 3313.23 KGS INCLUSIVE OF 234.67% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF STAINLESS STEEL OF THE EXPORT ITEM.

Case No. 19 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date UDIN00566753AM26

E GRADE OF STAINLESS STEEL OF THE EXPORT ITEM.

Case No. 19 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date UDIN00566753AM26

16 HQ File Number HQRNORM REVIW00002443AM25 RA File Number 039404001130 AM19 Licence No and Date 0310828077/02/04/2019 Case deferred for the DL reply of the firm.

Case No. 20 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004733AM26 RA File Number 052304000111 AM20 Licence No and Date 0510410946/14/06/2019 The Committee considered the case as per agenda and noted that the firm has vide mail dated 06.01.2026 informed that this Advance Authorization was already approved by Norms Committee in its meeting dated 16.11.2021 (offline cases) and therefore, has requested to close this Review Application. Accordingly, the Committee decided to close this case showing it as approved.

Case No. 21 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006192AM25 RA File Number 092404000138 AM20 Licence No and Date 0910067697/26/06/2019

QUANTITY AND WASTAGE TO BE SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT UDIN00566753AM26

HQRNORM REVIW00006192AM25 RA File Number 092404000138 AM20 Licence No and Date 0910067697/26/06/2019

QUANTITY AND WASTAGE TO BE SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT UDIN00566753AM26

17 ALLOWED 1 TURBINE BLADES (NET CONTENT OF IMPORT ITEM SHALL BE 816.20 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS & INVOICES)

212 NOS GTD 450 - STAINLESS STEEL BARS, 100MM RCS

1963.30 KGS INCLUSIVE OF 140.61% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF

Case No. 22 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002444AM25 RA File Number 039404000474 AM20 Licence No and Date 0310833455/17/12/2019 Case deferred for the DL reply of the firm.

Case No. 23 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name KAY BOUVET ENGINEERING LTD Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 15 and 09/01/2026 HQ File Number HQRNORM REVIW00004351AM26 RA File Number 318304000139 AM20 Licence No and Date 3110067666/27/01/2020 comments of MHI dated 05.01.2026, as under: UDIN00566753AM26

26/ 15 and 09/01/2026 HQ File Number HQRNORM REVIW00004351AM26 RA File Number 318304000139 AM20 Licence No and Date 3110067666/27/01/2020 comments of MHI dated 05.01.2026, as under: UDIN00566753AM26

18

Export product Qty. in Nos. Net wt. of Export products Import item %wastage to be allowed on net content basis after recovery Qty. to be allowed CALANDRIA ASSEMBLY WITH ASSOCIATED COMPONENTS 2 Sets 80 MT HOT ROLLED PLATES (STAINLESS STEEL) SA240 TYPE -304L 8.74% 86.992 MT

Case No. 24 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001838AM26 RA File Number 052304000434 AM20 Licence No and Date 0510413570/10/02/2020 comments of Consultant (Tech-3) dated 07.01.2026, as under:

import 1- net to net as per GN4 2 to 5-- Net content in EP + 3% wastage. In import item 2 add " Amorphous Silicon Dioxide "

UDIN00566753AM26

nt (Tech-3) dated 07.01.2026, as under:

import 1- net to net as per GN4 2 to 5-- Net content in EP + 3% wastage. In import item 2 add " Amorphous Silicon Dioxide "

UDIN00566753AM26

19

Case No. 25 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001839AM26 RA File Number 052304000427 AM20 Licence No and Date 0510413543/10/02/2020 comments of Consultant (Tech-3) dated 07.01.2026, as under:

import 1- net to net as per GN4 2 to 5-- Net content in EP + 3% wastage. In import item 2 add " Amorphous Silicon Dioxide "

Case No. 26 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name ACEINOTEC MANUFACTURING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000368AM26 RA File Number 072404000016 AM21 Licence No and Date 0710116365/23/04/2020 comments of Consultant (SKB) dated 16.12.2025, as under:

ITEM OF IMPORTS & QUANTITY & SL No ITEM OF EXPORT QUANTITY UDIN00566753AM26

072404000016 AM21 Licence No and Date 0710116365/23/04/2020 comments of Consultant (SKB) dated 16.12.2025, as under:

ITEM OF IMPORTS & QUANTITY & SL No ITEM OF EXPORT QUANTITY UDIN00566753AM26

20 QUANTITY APPLIED WASTAGE TO BE ALLOWED 1 Front Block 5618 NOS 51136780N - RM- Rods - 35NCD16H -54X36 M"M QTY: 7161.00 KGS 5282.67 KG INCLUSIVE OF 246.18% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 2 Block Central 4615 NOS 51320462Z

RM-Rods

35NCD16H -DIA 34 M"M QTY: 6000.00 KGS 4353.67 KG INCLUSIVE OF 310.34% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 3 RECEIVER 5.56 NATO AUTO 575 NOS 35NCD16H -54X36 M"M QTY: 2587.00 KGS 1867.33 KG INCLUSIVE OF 336.29% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 4 RECEIVER 7.62 X 39 SEMI AUTO 1490 NOS 35NCD16H -54X36 M"M QTY: 6705.00 KGS 4750.67 KG INCLUSIVE OF 464.21% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 5 RECEIVER 5.56 NATO SEMI AUTO- USA 1110 NOS 35NCD16H -54X36 M"M QTY: 4995.00 KGS 4995.00 KG INCLUSIVE OF 403.67% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 6 RECEIVER 7.62x51 410 NOS 35NCD16H -54X36 MM QTY: 1845.00 KGS 1322.00 KG INCLUSIVE OF 375.78% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 35NCD16H -54X36 M"M 1620.00 KG INCLUSIVE OF 500% WASTAGE AFTER 1/3RD 7 RECEIVER SEMI- FINISHED 510 NOS UDIN00566753AM26

KG INCLUSIVE OF 375.78% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 35NCD16H -54X36 M"M 1620.00 KG INCLUSIVE OF 500% WASTAGE AFTER 1/3RD 7 RECEIVER SEMI- FINISHED 510 NOS UDIN00566753AM26

21 QTY: 2295.00 KGS RECOVERY FROM SCRAP. 8 RECEIVER 5.56 NATO AUTO 1156 NOS 35NCD16H -54X36 M"M QTY: 5202.00 KGS 3703.67 KG INCLUSIVE OF 423.86% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 9 SLIDE R9 2900 NOS 35NCD16H -54X36 M"M QTY: 3915.00 KGS 2771.00 KG INCLUSIVE OF 473.70% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 10 SLIDE RS9 1575 NOS 35NCD16H -54X36 M"M QTY: 2000.00 KGS 1433.33 KG INCLUSIVE OF 377.78% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 11 SLIDE F9 x 19 1500 NOS 35NCD16H -54X36 M"M QTY: 2025.00 KGS 1456.67 KG INCLUSIVE OF 355.21% WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP. 12 SLIDE FS9 1000 NOS 35NCD16H -54X36 M"M QTY: 1270.00 KGS 920.67 KG INCLUSIVE OF 314.72 % WASTAGE AFTER 1/3RD RECOVERY FROM SCRAP.

NOTE: THE GRADE OF IMPORTED STEEL SHOULD MATCH THE GRADE OF STEEL IN THE EXPORT PRODUCT.

Case No. 27 / NC/1/MEET/Jan/202526/15 Case Status Case Approved UDIN00566753AM26

ECOVERY FROM SCRAP.

NOTE: THE GRADE OF IMPORTED STEEL SHOULD MATCH THE GRADE OF STEEL IN THE EXPORT PRODUCT.

Case No. 27 / NC/1/MEET/Jan/202526/15 Case Status Case Approved UDIN00566753AM26

22 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006193AM25 RA File Number 092404000290 AM21 Licence No and Date 0910069158/07/09/2020 comments of Consultant (SKB) dated 02.01.2026 , as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE PARTS / BLADES NET CONTENT OF IMPORT ITEM SHALL BE 716.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 1100 NOS STAINLESS STEEL BARS (GRADE MTB10, 10705 SIZE: 50X76, 40X63, 50X77, 52X68, 51X81, 42X68, 48X61, 61X110, 43X62)

4538.37 KGS INCLUSIVE OF 533.85% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF

Case No. 28 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006803AM25 RA File Number 092404000347 AM21 Licence No and Date 0910069252/23/09/2020 UDIN00566753AM26

15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006803AM25 RA File Number 092404000347 AM21 Licence No and Date 0910069252/23/09/2020 UDIN00566753AM26

23 comments of Consultant (SKB) dated 02.01.2026 , as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE PARTS / BLADES (Net content of import item shall be 513.90 kgs, which shouldbe reflected in the shipping bills and invoice) 571 NOS STAINLESS STEEL BARS (GRADE 10705 SIZE: 42X167,40X154, 36X283, 46X99)

3026.36 KGS INCLUSIVE OF 488.90% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF

Case No. 29 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005049AM25 RA File Number 092404000334 AM21 Licence No and Date 0910069412/29/10/2020

Case No. 30 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date UDIN00566753AM26

M25 RA File Number 092404000334 AM21 Licence No and Date 0910069412/29/10/2020

Case No. 30 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date UDIN00566753AM26

24 HQ File Number HQRNORM REVIW00006802AM25 RA File Number 092404000439 AM21 Licence No and Date 0910069430/03/11/2020

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (Net content of import item shall be 2521.68 kgs, which shouldbe reflected in the shipping bills and invoice) 532 NOS STAINLESS STEEL BARS, (CB 403- DIA 130) 17555.94 KGS INCLUSIVE OF 596.20% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF

Case No. 31 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00039048AM21 RA File Number 342404000170 AM21 Licence No and Date 3411000017/15/12/2020

UDIN00566753AM26

d Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00039048AM21 RA File Number 342404000170 AM21 Licence No and Date 3411000017/15/12/2020

UDIN00566753AM26

25 Case No. 32 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006203AM25 RA File Number 04AA04004698 AM21 Licence No and Date 0411000077/23/12/2020

Case No. 33 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006798AM25 RA File Number 092404000435 AM21 Licence No and Date 0911000157/08/01/2021 comments of Consultant (SKB) dated 02.01.2026 , as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME - HOUSING2205969 & HOUSING MOUNT

70720602- 3), (NET CONTENT OF IMPORT ITEM SHALL BE 528.65 KG. WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 97 NOS STAINLESS STEEL CASTING (GRADE: MILSTD-130, AMS5355)

QTY: 601.00 KGS

586.54KGS INCLUSIVE OF 10.95% WASTAGE
ON THE NET WEIGHT OF THE ASSEMBLY ( HOUSING & HOUSING MOUNT) OF THE EXPORT PRODUCT.

UDIN00566753AM26

D-130, AMS5355)

QTY: 601.00 KGS

586.54KGS INCLUSIVE OF 10.95% WASTAGE
ON THE NET WEIGHT OF THE ASSEMBLY ( HOUSING & HOUSING MOUNT) OF THE EXPORT PRODUCT.

UDIN00566753AM26

26 NOTE: THE GRADE OF IMPORTED STAINLESS CASTINGS SHOULD MATCH THE GRADE OF STAINLESS STEEL OF THE COMPONENTS OF THE EXPORT ITEM.

Case No. 34 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006799AM25 RA File Number 092404000438 AM21 Licence No and Date 0911000158/08/01/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME

PLATE, BUTTERFLY-63001614- 2),(NET CONTENT OF IMPORT ITEM SHALL BE 287.70 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 411 NOS INCONEL CASTING (GRADE: AMS2774)

QTY: 328.80 KGS

320.58 KGS INCLUSIVE OF 11.43% WASTAGE
ON THE NET WEIGHT OF THE PLATE AND BUTTERFLY) OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED INCONEL CASTINGS SHOULD MATCH THE GRADE OF INCONEL OF THE COMPONENTS OF THE EXPORT ITEM.

UDIN00566753AM26

OF THE PLATE AND BUTTERFLY) OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED INCONEL CASTINGS SHOULD MATCH THE GRADE OF INCONEL OF THE COMPONENTS OF THE EXPORT ITEM.

UDIN00566753AM26

27

Case No. 35 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006800AM25 RA File Number 092404000436 AM21 Licence No and Date 0911000165/08/01/2021

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (PART NAME

BODY, WELDMENT, 540-1806- 2), (NET CONTENT OF 28.16 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 32 NOS TITANIUM CASTING (GRADE: 6AI-V PER EMS-54914)

QTY: 32.00 KGS

31.23 KGS INCLUSIVE OF 10.90% WASTAGE
ON THE NET WEIGHT OF THE BODY WELDMENT OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED TITANIUM CASTINGS SHOULD MATCH THE GRADE OF TITANIUM OF THE COMPONENTS OF THE EXPORT ITEM.

Case No. 36 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00006801AM25 RA File Number 092404000434 AM21 Licence No and Date 0911000156/08/01/2021 UDIN00566753AM26

36 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name HQ File Number HQRNORM REVIW00006801AM25 RA File Number 092404000434 AM21 Licence No and Date 0911000156/08/01/2021 UDIN00566753AM26

28

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT- (PART NAME - HOUSING-2205969 & FLOWBODY ASSEMBLY3185996-2), (NET CONTENT OF 368.50 K.G., WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 110 NOS ALUMINIUM CASTING (GRADE: ALLOY A357, AMS- A-21180)

QTY: 412.50 KGS

403.70 KGS INCLUSIVE OF 9.55% WASTAGE ON THE NET WEIGHT OF THE ASSEMBLY (HOUSING AND FLOWBODY) OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED ALUMINIUM CASTINGS SHOULD MATCH THE GRADE OF ALUMINIUM OF THE COMPONENTS OF THE EXPORT ITEM.

Case No. 37 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date NC/ 1/ MEET/ Jan/ 202526/ 15 and 09/01/2026 HQ File Number HQRNORM REVIW00005417AM25 RA File Number 09AA04003682 AM21 Licence No and Date 0911000224/21/01/2021

QUANTITY & SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT UDIN00566753AM26

/2026 HQ File Number HQRNORM REVIW00005417AM25 RA File Number 09AA04003682 AM21 Licence No and Date 0911000224/21/01/2021

QUANTITY & SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT UDIN00566753AM26

29 WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (CNC TURNED COMPONENTS) (PART NAME- AE28528-018, AE31463K, AE32629, AE32645, AE32895, AE36373, AE36398, AE37276, AE70765, AE37278, AE37605, AE37607, AE61343, AE61345, AE62656, AE65328, AE60532, AE65332, AE66063, AE66069, AE70765, ) (NET CONTENT OF 3,150.00 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE)

4200 NOS TITANIUM BAR (GRADE: ACES 921M19, ACES 921M8, AMS 4965, AMS 4928)

QTY: 3570.00 KGS

3486.10 KGS INCLUSIVE OF 10.67% WASTAGE
ON THE NET WEIGHT OF THE AIRCRAFT COMPONENTS OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED TITANIUM BAR SHOULD MATCH THE GRADE OF TITANIUM OF THE COMPONENTS OF THE EXPORT ITEM.

Case No. 38 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004866AM26 RA File Number 05AA04018188 AM22 Licence No and Date 0511002839/27/05/2021 UDIN00566753AM26

15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004866AM26 RA File Number 05AA04018188 AM22 Licence No and Date 0511002839/27/05/2021 UDIN00566753AM26

30

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5. Quantity of import items at Sl. No.6, 7, 23, 24, 37, 38 & 48 in Nos. also in addition to its weight. 6. Justification/basis for the quantities of welding materials supported by following information: 7. a. Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates / Sheets upto 30 mm thickness. i.

ies of welding materials supported by following information: 7. a. Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates / Sheets upto 30 mm thickness. i. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates / Sheets more than 70 mm thickness. iii. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. iv. b. Detailed calculations for the quantities of welding materials required for overlay, if any supported by overlay areas and thicknesses.

Case No. 39 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005053AM25 RA File Number 09AA04002060 AM22 Licence No and Date 0911001045/15/06/2021

Case No. 40 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LAXMI DENTAL LIMITED Meeting Number UDIN00566753AM26

31 and Date HQ File Number HQRNORM REVIW00004888AM25 RA File Number 03AA04068249 AM22 Licence No and Date 0311006401/24/08/2021

JUSTIFICATION OF 54 % WASTAGE IN DIE CUTTING WITH THE HELP OF SKETCH DIAGRAM AND AREA OF IMPORT AND EXPORT

Case No. 41 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name WORTHY ENGINEERING Meeting Number and Date HQ File Number HQRNORM REVIW00003169AM25 RA File Number 07AA04027685 AM22 Licence No and Date 0711001904/15/09/2021

Case No. 42 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005056AM25

e 0711001904/15/09/2021

Case No. 42 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005056AM25 RA File Number 09AA04016233 AM22 Licence No and Date 0911001743/22/10/2021

Case No. 43 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number UDIN00566753AM26

32 and Date HQ File Number HQRNORM REVIW00005051AM25 RA File Number 09AA04017807 AM22 Licence No and Date 0911001893/22/11/2021

Case No. 44 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004588AM26 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021

Case No. 45 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006198AM25 RA File Number 04AX04000097 AM22 Licence No and Date 0411002478/25/01/2022

Case No. 46 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name HIGHLY ELECTRICAL APPLIANCES INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022 UDIN00566753AM26

RICAL APPLIANCES INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022 UDIN00566753AM26

33

Case No. 47 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name JVS FLOW CONTROL PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000936AM26 RA File Number 34AX04000421 AM22 Licence No and Date 3411002031/25/03/2022 comments of DPIIT dated 05 .01.2026, as under:

Net weight of export item may be specified as 7920 Kgs.
1. Import item at SI No.1 shall be of relevant grade and diameter as contained/ utilized in the export item and its quantity may be allowed as 1174 Kgs as 1.80 Kgs./Kg. content in the export item after taking 20% recovery from the scrap. 2. Import item at SI No.2 shall be of relevant grade and diameter as contained / utilized in the export item and its quantity may be allowed as 2128.2 Kgs as 2.44 Kgs./Kg. content in the export item
after taking 20% recovery from the scrap. 3.

Case No. 48 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004527AM26 RA File Number 05AX04000657 AM22 Licence No and Date 0511011949/19/04/2022

Case No. 49 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED UDIN00566753AM26

umber 05AX04000657 AM22 Licence No and Date 0511011949/19/04/2022

Case No. 49 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED UDIN00566753AM26

34 Meeting Number and Date HQ File Number HQRNORM REVIW00006556AM25 RA File Number 04AX04000375 AM22 Licence No and Date 0411003194/27/04/2022

Case No. 50 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006199AM25 RA File Number 04AX04000084 AM23 Licence No and Date 0411003261/09/05/2022

As per the reply submitted by the firm vide their letter dated 18.11.2024 , net weight of export item(s) has been indicated as 466 MT. ( Annexure-I) and the net weight of import items in the export items is 819.955 MT( Annexure-II) and net weight of indigenous inputs is 180 MT. ( Annexure-IV) 1. The above discrepancy in the weighs of inputs in the export items may be clarified. 2. furnished. 3. 4. 5.

Case No. 51 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name STERLITE TECHNOLOGIES LIMITED HQ File Number HQRNORM APPLY 00001507AM26 RA File Number NA UDIN00566753AM26

d. 3. 4. 5.

Case No. 51 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name STERLITE TECHNOLOGIES LIMITED HQ File Number HQRNORM APPLY 00001507AM26 RA File Number NA UDIN00566753AM26

35 Licence No and Date 0311015588/16/06/2022 comments of Meity dated 10.12.2025 and its clarification dated 23.12.2025 in similar case of the firm, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 Optical Fibre Cable - 288F 1592.727

KME

SINGLE MODE OPTICAL FIBER (Single mode Fibre) 474760.06

KME

Case No. 52 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name STERLITE TECHNOLOGIES LIMITED HQ File Number HQRNORM APPLY 00001506AM26 RA File Number NA Licence No and Date 0311015693/21/06/2022 comments of Meity dated 10.12.2025 and its clarification dated 23.12.2025 in similar case of the firm, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 Optical Fibre Cable -144F 1617.573 KME SINGLE MODE OPTICAL FIBER (Single mode Fibre)

2,41,083.08 KME UDIN00566753AM26

UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 Optical Fibre Cable -144F 1617.573 KME SINGLE MODE OPTICAL FIBER (Single mode Fibre)

2,41,083.08 KME UDIN00566753AM26

36 2 Optical Fibre Cable -96F 1302.47 KME SINGLE MODE OPTICAL FIBER (Single mode Fibre)

1,29,413.42 KME 3 Optical Fibre Cable-48F 1294.253 KME SINGLE MODE OPTICAL FIBER (Single mode Fibre)

64,298.49 KME

Case No. 53 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004803AM26 RA File Number 05AX04001950 AM23 Licence No and Date 0511015196/07/10/2022

Case No. 54 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004814AM26 RA File Number 05AX04001951 AM23 Licence No and Date 0511015197/07/10/2022

Case No. 55 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number UDIN00566753AM26

nce No and Date 0511015197/07/10/2022

Case No. 55 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number UDIN00566753AM26

37 and Date HQ File Number HQRNORM REVIW00000718AM26 RA File Number 34AX04000667 AM23 Licence No and Date 3411002909/13/10/2022

Case No. 56 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ITT ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004574AM26 RA File Number 03AX04003606 AM23 Licence No and Date 0311018683/18/10/2022

Case No. 57 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name KLOECKNER DESMA MACHINERY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004772AM26 RA File Number 08AX04001471 AM23 Licence No and Date 0811006780/16/12/2022

Case No. 58 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name NUCON AEROSPACE PRIVATE LIMITED HQ File Number HQRNORM REVIW00003530AM26 RA File Number 09AX04000983 AM23 Licence No and Date 0911004401/03/02/2023 UDIN00566753AM26

e Status Case Approved Party Name NUCON AEROSPACE PRIVATE LIMITED HQ File Number HQRNORM REVIW00003530AM26 RA File Number 09AX04000983 AM23 Licence No and Date 0911004401/03/02/2023 UDIN00566753AM26

38 comments of Consultant (SKB) dated 08.01.2026 and 16.01.2026, as under:

ITEM OF EXPORT: AIR COOLING MACHINES QTY: 2 NOS DETAIL OF THE PARTS OF THE EXPORT ITEM AND DETAIL OF THE REQUIRED ITEMS OF IMPORT, AND ALSO WASTAGE THEREOF: SL No PARTS OF EXPORT ITEM QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 OUTER HOUSING ASSEMBLY

171.50X164X207 MM

(WT: 2.632 KGS)

2 NOS ALUMINIUM ALLOY GRADE 6061-6511. DIA: 215.91 MM QTY: 37.8 KGS 35.0 KGS INCLUSIVE OF 1229.79% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT.
2 FAN HOLDER

84.25X123.60X239.75 MM

(WT: 0.364 KGS) 2 NOS ALUMINIUM ALLOY GRADE 6061- 6511(88.90 T 135 W 250 L). QTY: 16.42 KGS 14.69 KGS INCLUSIVE OF 3935.71% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 3 OUTER COVER

83.70X243.80X331.60 MM

(WT: 2.436 KGS)

2 NOS ALUMINIUM ALLOY GRADE 6061- 651(88.90 T 265W). QTY: 44.80 KGS

41.60 KGS INCLUSIVE OF 1607.59% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

UMINIUM ALLOY GRADE 6061- 651(88.90 T 265W). QTY: 44.80 KGS

41.60 KGS INCLUSIVE OF 1607.59% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

39 4 FRONT HOUSING

192.30X406.40X456.40 MM

(WT: 3.659 KGS) 2 NOS ALUMINIUM ALLOY GRADE 6061- 651(203.2 T 425W). QTY: 222.92 KGS

198.90 KGS INCLUSIVE OF 5368.16% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 5 POD DUCT

77.65X82.29X1888.0 MM

(WT: 0.572 KGS) 4 NOS PLOY EITHER AMIDE THICK 90 (90 T, 90 W,100L).

QTY: 8.0 KGS 7.73 KGS INCLUSIVE OF 1251.40% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 6 REAR HX2 GASKET SUPPORT

4.75 X 11.36 X 215.8 MM

(WT: 0.198 KGS) 2 NOS STAINLESS STEEL GRADE 316L, THICK: 7.92 MM

QTY: 1.617 KGS 1.59 KGS INCLUSIVE OF 701.51% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 7 SCREW RETAINER

7.9 X 16 X 28 MM

(WT: 0.064 KGS) 8 NOS STAINLESS STEEL GRADE 316L, THICK: 9.525 MM

QTY: 0.39 KGS 0.38 KGS INCLUSIVE OF 503.12% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 8 MAIN BOX

27.5X104.8X232.60 MM

(WT: 0.816 KGS) 2 NOS ALUMINIUM ALLOY GRADE 6061, THICK 31.65. QTY: 4.61 KGS

4.30 KGS INCLUSIVE OF 427.33% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

2 NOS ALUMINIUM ALLOY GRADE 6061, THICK 31.65. QTY: 4.61 KGS

4.30 KGS INCLUSIVE OF 427.33% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

40 9 LABYRINTH,

DIA 21.90 X 29.8 MM

(WT: 0.088 KGS) 2 NOS STAINLESS STEEL ROD, GRADE 416, DIA: 25.4 MM

QTY: 0.3098 KGS 0.308 KGS INCLUSIVE OF 249.54% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 10 BEARING HOUSING,

DIA: 58.8 X 111.00 MM

(WT: 0.64 KGS) 2 NOS STAINLESS STEEL GRADE 15-5PH, DIA: 63.5 MM,

QTY: 6.1157 KGS 5.98 KGS INCLUSIVE OF 835.26% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 11 CAP BOX,

69 X 63.9 X 71.5 MM

(WT: 0.23 KGS) 2 NOS ALUMINIUM ALLOY GRADE 6061- T651(THK: 76.20 MM). QTY: 2.47 KGS

2.07 KGS INCLUSIVE OF 800% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED ITEMS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT ITEMS.

Case No. 59 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM23 RA File Number 04AX04001036 AM23 Licence No and Date 0411004952/27/02/2023 UDIN00566753AM26

d Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM23 RA File Number 04AX04001036 AM23 Licence No and Date 0411004952/27/02/2023 UDIN00566753AM26

41 The Committee considered the case as per agenda and noted that the applicant did not turn up for attending PH and requested on mail for another date of PH. Hence, the Committee decided to give the applicant another chance of attending the PH in the forthcoming meeting with all supporting documents to explain his case.

Case No. 60 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006912AM23 RA File Number 04AX04001090 AM23 Licence No and Date 0411005039/10/03/2023 The Committee considered the case as per agenda and noted that the applicant did not turn up for attending PH and requested on mail for another date of PH. Hence, the Committee decided to give the applicant another chance of attending the PH in the forthcoming meeting with all supporting documents to explain his case.

Case No. 61 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006557AM25 RA File Number 04AX04001058 AM23 Licence No and Date 0411005111/23/03/2023

Case No. 62 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number UDIN00566753AM26

r 04AX04001058 AM23 Licence No and Date 0411005111/23/03/2023

Case No. 62 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number UDIN00566753AM26

42 and Date HQ File Number HQRNORM APPLY 00007183AM23 RA File Number 04AX04001128 AM23 Licence No and Date 0411005130/24/03/2023 The Committee considered the case as per agenda and noted that the applicant did not turn up for attending PH and requested on mail for another date of PH. Hence, the Committee decided to give the applicant another chance of attending the PH in the forthcoming meeting with all supporting documents to explain his case.

Case No. 63 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OAM SAAI INTERNATIONAL INC. Meeting Number and Date HQ File Number HQRNORM APPLY 00000881AM24 RA File Number 05AX04000245 AM24 Licence No and Date 0511018850/16/05/2023 The Committee considered the case as per agenda and noted that as per decision taken in earlier meeting, the applicant has to be called for PH in this meeting, but he was not called for PH due to unavailability of the representative of MHI on the date of meeting.

per decision taken in earlier meeting, the applicant has to be called for PH in this meeting, but he was not called for PH due to unavailability of the representative of MHI on the date of meeting. Hence, the committee decided to give the applicant another chance of attending the PH in the forthcoming meeting with all supporting documents to explain his case.

Case No. 64 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name RAGHU VAMSI MACHINE TOOLS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004967AM25 RA File Number 09AX04000204 AM24 Licence No and Date 0911005234/20/06/2023 The Committee considered the case as per agenda and noted that as per decision taken in earlier meeting, UDIN00566753AM26

43 the applicant has to be called for PH in this meeting, but he was not called for PH due to unavailability of the representative of MHI on the date of meeting. Hence, the committee decided to give the applicant another chance of attending the PH in the forthcoming meeting with all supporting documents to explain his case.

Case No. 65 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002907AM24 RA File Number 34AX04000010 AM23 Licence No and Date 3411003841/28/06/2023

Case No. 66 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005014AM24 RA File Number 34AX04000208 AM24 Licence No and Date 3411004021/11/08/2023

Case No.

e Deferred Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005014AM24 RA File Number 34AX04000208 AM24 Licence No and Date 3411004021/11/08/2023

Case No. 67 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004188AM26 RA File Number 05AX04000989 AM24 Licence No and Date 0511020481/18/08/2023 UDIN00566753AM26

44

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. 4. Quantities of import items at Sl. No. 3, 5, 16 &18 in Nos. also in addition to their weights. 5. Justification/basis for the quantities of welding materials supported by following information: a. Weight of steel, which requires imported welding materials, giving break-up of: i. Steel Plates / Sheets upto 30 mm thickness. ii. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 6. b.

n 30 mm thickness and upto 70 mm thickness. iii. Steel Plates / Sheets more than 70 mm thickness. iv. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. 6. b. Detailed calculations for the quantities of welding materials required for overlay, if any, supported
by overlay areas and thicknesses.

Case No. 68 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005161AM24 RA File Number 06AX04000040 AM24 Licence No and Date 0611002150/21/08/2023 The Committee considered the case as per agenda. Representative of the firm Shri Vinod Mishra, Assistant General Manager attended the Personal Hearing before Norms Committee-1 and explained the case in detail. He stated the Image Intensifier Tube (II Tube) and the Infra-Red Aiming Device (IRAD) constitute the primary and mission-critical components of Night Vision Equipment (Night Fighting Systems). Due to their inherently high sensitivity and precision design, these components require strict handling and quality control. Even minor imperfections—such as surface scratches, black spots, white spots, or deviations in electrical or mechanical connector integrity—can significantly degrade operational performance, reliability, and overall system effectiveness. Consequently, maintaining these components in defect-free condition is essential to ensure optimal functionality and mission readiness.

l performance, reliability, and overall system effectiveness. Consequently, maintaining these components in defect-free condition is essential to ensure optimal functionality and mission readiness. There are no permissible tolerance limits for such defects, as these systems are deployed by security forces of importing country for night-time operations and internal security surveillance along national borders, where reliability and accuracy are mission-critical. Further, he stated that his firm has obtained SCOMET authorization from UDIN00566753AM26

45 MoD for exporting the item mentioned in this AA. As such, he requested for allowing reasonable wastage for the said components. After due deliberation, the Committee decided to defer the case for further examination.

Case No. 69 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006200AM25 RA File Number 04AX04000494 AM24 Licence No and Date 0411006009/14/09/2023

As per the reply submitted by the firm vide their letter dated 02.12.2024 , net weight of export item(s) has been indicated as 59,600 Kgs. ( Annexure-1) and the net weight of import items in the export items is 76,766 Kgs.( Annexure-II) 1. The above discrepancy in the weighs of inputs in the export items may be clarified. 2. furnished. 3. 4. 5.

and the net weight of import items in the export items is 76,766 Kgs.( Annexure-II) 1. The above discrepancy in the weighs of inputs in the export items may be clarified. 2. furnished. 3. 4. 5.

Case No. 70 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006201AM25 RA File Number 04AX04000490 AM24 Licence No and 0411006023/15/09/2023 UDIN00566753AM26

46 Date As per the reply submitted by the firm vide their letter dated 20.11.2024 , net weight of export item(s) has been indicated as 32 000 Kgs. ( Annexure-1) and the net weight of import items in the export items is 65,628 Kgs.( Annexure-II) and net weight of indigenous inputs is 5500 Kgs. ( Annexure-IV) 1. The above discrepancy in the weighs of inputs in the export items may be clarified. 2. furnished. 3. 4. 5.

Case No. 71 / NC/1/MEET/Jan/202526/15 Case Status Case Rejected Party Name ENGINEERED POLYMERS (INDIA) PVT LTD Meeting Number and Date HQ File Number HQRNORM REVIW00005536AM25 RA File Number 07AX04000882 AM24 Licence No and Date 0711009239/20/09/2023 The committee considered the case as per agenda and noted that mails dt.05.01.2026 and 07.01.2026 were sent to the applicant for appearing before NC-1 for personal hearing on 09.01.2026. But the firm neither responded to the said mails nor appeared for personal hearing. Hence, the committee decided to reject the present review application.

NC-1 for personal hearing on 09.01.2026. But the firm neither responded to the said mails nor appeared for personal hearing. Hence, the committee decided to reject the present review application.

Case stands rejected.

Case No. 72 / NC/1/MEET/Jan/202526/15 Case Status Case Rejected Party Name ENGINEERED POLYMERS (INDIA) PVT LTD Meeting Number and Date HQ File Number HQRNORM REVIW00005537AM25 UDIN00566753AM26

47 RA File Number 07AX04001073 AM24 Licence No and Date 0711009421/11/10/2023 The committee considered the case as per agenda and noted that mails dt.05.01.2026 and 07.01.2026 were sent to the applicant for appearing before NC-1 for personal hearing on 09.01.2026. But the firm neither responded to the said mails nor appeared for personal hearing. Hence, the committee decided to reject the present review application.

Case stands rejected.

Case No. 73 / NC/1/MEET/Jan/202526/15 Case Status Case Rejected Party Name DELUX BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004073AM25 RA File Number 03AX04003741 AM24 Licence No and Date 0311028766/17/11/2023 The committee considered the case as per agenda and as per comments of DPIIT dated 26.12.2025 decided to reject the present review application as the firm has not ascertained the weight of components at the time of import.

Case stands rejected.

Case No. 74 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004305AM26 RA File Number 05AX04002773 AM24 Licence No and Date 0511022504/06/12/2023

MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004305AM26 RA File Number 05AX04002773 AM24 Licence No and Date 0511022504/06/12/2023

Case No. 75 / NC/1/MEET/Jan/202526/15 UDIN00566753AM26

48 Case Status Case Rejected Party Name ICEM ENGINEERING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005603AM25 RA File Number 03AX04004065 AM24 Licence No and Date 0311029662/27/12/2023 The committee considered the case as per agenda and noted from comments of DPIIT dated 26.12.2025 that as per norms fixed earlier for this A.A., quantity of import item has been allowed as 1.10 Kgs./Kg. content in the export item . The firm has informed that the wastage in this case is nearly 20 % and has requested that wastage of 18 % may be allowed in this case in line with their other similar cases. However, it is seen that in this case, firm has claimed norms of only 1.11 Kgs./Kg. content in the export item. Hence, the committee decided to reject the present review application.

similar cases. However, it is seen that in this case, firm has claimed norms of only 1.11 Kgs./Kg. content in the export item. Hence, the committee decided to reject the present review application.

Case stands rejected.

Case No. 76 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000483AM26 RA File Number 03AX04004720 AM24 Licence No and Date 0311030242/17/01/2024 Case deferred for the DL reply of the firm.

Case No. 77 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008196AM24 RA File Number 06AX04000307 AM24 Licence No and Date 0611002455/29/01/2024 The Committee considered the case as per agenda. Representative of the firm Shri Vinod Mishra, Assistant General Manager attended the Personal Hearing before Norms Committee-1 and explained the UDIN00566753AM26

49 case in detail. He stated the Image Intensifier Tube (II Tube) and the Infra-Red Aiming Device (IRAD) constitute the primary and mission-critical components of Night Vision Equipment (Night Fighting Systems). Due to their inherently high sensitivity and precision design, these components require strict handling and quality control. Even minor imperfections—such as surface scratches, black spots, white spots, or deviations in electrical or mechanical connector integrity—can significantly degrade operational performance, reliability, and overall system effectiveness.

scratches, black spots, white spots, or deviations in electrical or mechanical connector integrity—can significantly degrade operational performance, reliability, and overall system effectiveness. Consequently, maintaining these components in defect-free condition is essential to ensure optimal functionality and mission readiness. There are no permissible tolerance limits for such defects, as these systems are deployed by security forces of importing country for night-time operations and internal security surveillance along national borders, where reliability and accuracy are mission-critical. Further, he stated that his firm has obtained SCOMET authorization from MoD for exporting the item mentioned in this AA. As such, he requested for allowing reasonable wastage for the said components. After due deliberation, the Committee decided to defer the case for further examination.

Case No. 78 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008544AM24 RA File Number 34AX04001179 AM23 Licence No and Date 3411004599/13/02/2024

Case No. 79 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002754AM26 RA File Number 02AX04000696 AM24 Licence No and Date 0211006051/27/02/2024

Case No. 80 / NC/1/MEET/Jan/202526/15 Case Status Case Rejected Party Name ENGINEERED POLYMERS (INDIA) PVT LTD UDIN00566753AM26

Number 02AX04000696 AM24 Licence No and Date 0211006051/27/02/2024

Case No. 80 / NC/1/MEET/Jan/202526/15 Case Status Case Rejected Party Name ENGINEERED POLYMERS (INDIA) PVT LTD UDIN00566753AM26

50 Meeting Number and Date HQ File Number HQRNORM REVIW00005515AM25 RA File Number 07AX04002082 AM24 Licence No and Date 0711010958/01/04/2024 The committee considered the case as per agenda and noted that mails dt.05.01.2026 and 07.01.2026 were sent to the applicant for appearing before NC-1 for personal hearing on 09.01.2026. But the firm neither responded to the said mails nor appeared for personal hearing. Hence, the committee decided to reject the present review application.

Case stands rejected.

Case No. 81 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name MASU BRAKE PADS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003276AM25 RA File Number 05AX04000007 AM25 Licence No and Date 0511024839/03/04/2024

Case No. 82 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000484AM26 RA File Number 03AX04000215 AM25 Licence No and Date 0311033129/17/04/2024 Case deferred for the DL reply of the firm.

Case No. 83 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED UDIN00566753AM26

17/04/2024 Case deferred for the DL reply of the firm.

Case No. 83 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED UDIN00566753AM26

51 Meeting Number and Date HQ File Number HQRNORM REVIW00004123AM25 RA File Number 34AX04000987 AM24 Licence No and Date 3411004825/22/04/2024

Case No. 84 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name ICEM ENGINEERING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003092AM26 RA File Number 03AX04000350 AM25 Licence No and Date 0311033591/06/05/2024 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed earlier as per comments of DPIIT dated 26.12.2025, as under:

Import item at Sl.No.1 (H.R. Non Alloy Steel Plates) shall be of relevant grade and thickness as contained/utilized in the export items at SI. No. 1 and its quantity may be allowed as 1298 MT as 1.18 Kgs/Kg content in the export item at SI.No.1. 1. Import item at Sl.No.6 ( H.R. Non Alloy Steel Plates) shall be of relevant grade and thickness as contained/utilized in the export items at SI. No. 3 and its quantity may be allowed as 342.2 MT as 1.18 Kgs/Kg content in the export item at SI.No.3. 2. Import items at Sl. No. 5 & 7 (H.R. Non Alloy Steel Plates- By Product) may not be allowed for import and accordingly these may be omitted.
3.

.18 Kgs/Kg content in the export item at SI.No.3. 2. Import items at Sl. No. 5 & 7 (H.R. Non Alloy Steel Plates- By Product) may not be allowed for import and accordingly these may be omitted.
3.

Case No. 85 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004804AM26 RA File Number 05AX04000326 AM25 Licence No and Date 0511025424/10/05/2024 UDIN00566753AM26

52

Case No. 86 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PARVEEN INDUSTRIES PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000699AM25 RA File Number 03AX04000698 AM25 Licence No and Date 0311033819/14/05/2024

Case No. 87 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name NIRMAL OVERSEAS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004601AM26 RA File Number 05AX04000236 AM25 Licence No and Date 0511025552/15/05/2024

Case No. 88 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000886AM25 RA File Number 09AX04000119 AM25 Licence No and Date 0911007293/24/05/2024

Case No. 89 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

File Number HQRNORM APPLY 00000886AM25 RA File Number 09AX04000119 AM25 Licence No and Date 0911007293/24/05/2024

Case No. 89 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

53 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004748AM26 RA File Number 05AX04000675 AM25 Licence No and Date 0511026051/12/06/2024

Case No. 90 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LEXCRU WATER INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001435AM25 RA File Number 08AX04000376 AM25 Licence No and Date 0811011881/20/06/2024 Case deferred for the DL reply of the firm.

Case No. 91 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name YAMAHA MUSIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001599AM25 RA File Number 05AX04000365 AM25 Licence No and Date 0511026343/27/06/2024

Case No. 92 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and Date 2411003661/01/07/2024 UDIN00566753AM26

Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and Date 2411003661/01/07/2024 UDIN00566753AM26

54

Case No. 93 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000404AM26 RA File Number 03AX04001672 AM25 Licence No and Date 0311035212/04/07/2024

Case No. 94 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001650AM26 RA File Number 04AX04000253 AM25 Licence No and Date 0411007732/04/07/2024

Case No. 95 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004794AM26 RA File Number 05AX04001238 AM25 Licence No and Date 0511026852/24/07/2024

Case No. 96 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

Q File Number HQRNORM REVIW00004794AM26 RA File Number 05AX04001238 AM25 Licence No and Date 0511026852/24/07/2024

Case No. 96 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

55 Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002216AM25 RA File Number 31AX04000154 AM25 Licence No and Date 3111003745/30/07/2024

Case No. 97 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name YAMAHA MUSIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002257AM25 RA File Number 05AX04000473 AM25 Licence No and Date 0511026959/01/08/2024

Case No. 98 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004189AM26 RA File Number 05AX04001324 AM25 Licence No and Date 0511027023/06/08/2024

Case No. 99 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002380AM26 RA File Number 08AX04000803 AM25 Licence No and Date 0811012440/20/08/2024 UDIN00566753AM26

Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002380AM26 RA File Number 08AX04000803 AM25 Licence No and Date 0811012440/20/08/2024 UDIN00566753AM26

56

Case No. 100 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001675AM26 RA File Number 09AX04000278 AM25 Licence No and Date 0911007773/21/08/2024

Case No. 101 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000610AM26 RA File Number 24AX04000219 AM25 Licence No and Date 2411003800/23/08/2024

Case No. 102 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002833AM25 RA File Number 03AX04002559 AM25 Licence No and Date 0311036863/03/09/2024

Case No. 103 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

File Number HQRNORM APPLY 00002833AM25 RA File Number 03AX04002559 AM25 Licence No and Date 0311036863/03/09/2024

Case No. 103 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

57 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001704AM26 RA File Number 09AX04000557 AM25 Licence No and Date 0911008066/30/09/2024

Case No. 104 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001707AM26 RA File Number 09AX04000554 AM25 Licence No and Date 0911008067/30/09/2024

Case No. 105 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003398AM25 RA File Number 34AX04000542 AM25 Licence No and Date 3411005480/01/10/2024

Separate quantities of each type of Fastener viz Stud, Tap Stud, Washers, Covered Nuts etc in export item at SI.No.1. 1. Separate quantities of each type of Fastener viz Stud, Tap Stud, Washers, Covered Nuts etc in export item at SI.No.2. 2. Separate quantities of each type of Stem, Valve bushing, Bushing in export item at SI.No.3. 3. furnished. 4. UDIN00566753AM26

d, Tap Stud, Washers, Covered Nuts etc in export item at SI.No.2. 2. Separate quantities of each type of Stem, Valve bushing, Bushing in export item at SI.No.3. 3. furnished. 4. UDIN00566753AM26

58 5. 6. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 7. The information at S.Nos.4 to 7 may be furnished separately for each type of fastener and valve parts. 8.

Case No. 106 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004747AM26 RA File Number 05AX04002016 AM25 Licence No and Date 0511028082/01/10/2024

Case No. 107 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002753AM26 RA File Number 24AX04000273 AM25 Licence No and Date 2411003922/08/10/2024

Case No. 108 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date UDIN00566753AM26

Licence No and Date 2411003922/08/10/2024

Case No. 108 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date UDIN00566753AM26

59 HQ File Number HQRNORM APPLY 00003584AM25 RA File Number 03AX04003381 AM25 Licence No and Date 0311037807/10/10/2024

Case No. 109 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004746AM26 RA File Number 05AX04002181 AM25 Licence No and Date 0511028220/10/10/2024

Case No. 110 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name EPE PROCESS FILTERS AND ACCUMULATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003828AM25 RA File Number 09AX04000583 AM25 Licence No and Date 0911008206/23/10/2024

Detail technical note on manufacturing process including the relevant flow sheet. 1. furnished. 2. 3. Use of export product. 4. Length of EP is higher than length of pipe to be imported. Please explain. 5. UDIN00566753AM26

facturing process including the relevant flow sheet. 1. furnished. 2. 3. Use of export product. 4. Length of EP is higher than length of pipe to be imported. Please explain. 5. UDIN00566753AM26

60

Case No. 111 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name POWERDRIVE BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003866AM25 RA File Number 08AX04001098 AM25 Licence No and Date 0811013043/25/10/2024 Case deferred for the DL reply of the firm.

Case No. 112 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00004125AM25 RA File Number 24AX04000318 AM25 Licence No and Date 2411004026/14/11/2024

Case No. 113 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024

Case No. 114 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024

Case No. 114 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

61 Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004285AM25 RA File Number 03AX04004121 AM25 Licence No and Date 0311038925/22/11/2024

Case No. 115 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LECHLER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024

Case No. 116 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name FINEPAC STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006579AM25 RA File Number 31AX04000326 AM25 Licence No and Date 3111004198/17/12/2024 Modification required in the norms approved by the Norms Committee. 1. Reason / justification for review of norms. 2.

Case No. 117 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OTRIVA INDUSTRIES LLP UDIN00566753AM26

roved by the Norms Committee. 1. Reason / justification for review of norms. 2.

Case No. 117 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OTRIVA INDUSTRIES LLP UDIN00566753AM26

62 Meeting Number and Date HQ File Number HQRNORM REVIW00004153AM26 RA File Number 34AX04000737 AM25 Licence No and Date 3411005848/23/12/2024

Case No. 118 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name MACAWBER BEEKAY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005227AM25 RA File Number 05AX04003153 AM25 Licence No and Date 0511029976/30/12/2024 comments of Consultant (SKB) dated 16.12.2025 , as under:

ITEM OF EXPORT: TRACKS FOR THE ASIST SYSTEMS. QTY: 3 NOS ITEMS OF IMPORTAND QUANTITY APPLIED Lloyds XM25 H1150 High Strength Extruded Steel Profile Special 04778 EX287Material shall be certified by Lloyds registered with a Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" Latest Edition. 1. QTY: 7896.00 KGS

Lloyds XM25 H1150 High Strength Extruded Steel Profile Special 04915 EX290Material shall be certified by Lloyds registered with a Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition 2. QTY: 1486.00 KGS Lloyds DH 36 Bulb Flat Bulb Flat HP 200X 9Material shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition. 3. UDIN00566753AM26

9Material shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition. 3. UDIN00566753AM26

63 QTY: 4196.00 KGS Lloyds DH 36 Bulb Flat Bulb Flat HP 220X 10Material shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition. 4. QTY: 1429.00 KGS Lloyds DH 36 High Strength Structural Steel 9mm thickness plate multiple of 600mmMaterial shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition 5. QTY: 6624.00 KGS Lloyds DH 36 High Strength Structural Steel 12mm thickness plateMaterial shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition. 6. QTY: 6912.00 KGS Lloyds DH 36 High Strength Structural Steel 25mm plate (3500 X 250)Material shall be certified by Lloyds registered with Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition 7. QTY: 2466.00 KGS Lloyds DH 36 High Strength Structural Steel 45mm plate 4000 X 800.Material shall be certified by Lloyds registered with a Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition 8.

m plate 4000 X 800.Material shall be certified by Lloyds registered with a Type 3.2 certificate in accordance with LR " Rules and Regulations for the classification of Naval Ship" latest Edition 8. QTY: 5382.00 KGS

Wastage to be allowed: 4.5% on the net weight of High Strength Extruded Steel Profile special 04778 EX287in the export product. 1. 11.5% on the net weight of High Strength Extruded Steel Profile special 04915 EX290in the export product. 2. 15% on the net weight of Bulb Flat HP 200x9 in the export product. 3. 20% on the net weight of Bulb Flat HP 220x10in the export product. 4. 22% on the net weight of High Strength Steel 9 mm thickness plate in the export product. 5. 20% on the net weight of High Strength Steel 12 mm thickness plate in the export product. 6. 30% on the net weight of High Strength Steel 25 mm thickness plate in the export product. 7. 20% on the net weight of High Strength Steel 25 mm thickness plate in the export product. 8. Note: The grade of imported steel profiles, Bulb Flats and Plates of various thicknesses should match the grade of steel profiles, bulb flats and plates going in the export product. UDIN00566753AM26

ote: The grade of imported steel profiles, Bulb Flats and Plates of various thicknesses should match the grade of steel profiles, bulb flats and plates going in the export product. UDIN00566753AM26

64

Case No. 119 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005706AM25 RA File Number 05AX04003463 AM25 Licence No and Date 0511030374/17/01/2025 comments of DPIIT dated 22.12.2025, as under:

Net weights of export item at Sl.No.1 may be specified as 60 Kgs. each i.e. 42,000 Kgs. 1. Quantity of import items at Sl.No.1 to 166 may be allowed may be allowed on net to net basis with accountability clause
2.

Case No. 120 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name INTENSIV-FILTER HIMENVIRO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005844AM25 RA File Number 05AX04003775 AM25 Licence No and Date 0511030532/24/01/2025

Case No. 121 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name STERLITE TECHNOLOGIES LIMITED HQ File Number HQRNORM APPLY 00006130AM25 RA File Number 03AX04005756 AM25 Licence No and Date 0311041210/11/02/2025 comments of Meity dated 10.12.2025 and its clarification dated 23.12.2025 in similar case of the firm, as UDIN00566753AM26

RA File Number 03AX04005756 AM25 Licence No and Date 0311041210/11/02/2025 comments of Meity dated 10.12.2025 and its clarification dated 23.12.2025 in similar case of the firm, as UDIN00566753AM26

65 under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 Optical Fibre Cable

• 12 F 720.00

KME SINGLE MODE OPTICAL FIBER (Single mode Fibre)

8,942.40 KME

ECCS Tape (Co- Polymer Coated Ms Eccs Tape)

30,186.42 KGS

MEDIUM DENSITY POLYETHYLENE (MDPE)

33,989.51 KGS

Case No. 122 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name STERLITE TECH CABLES SOLUTIONS LIMITED HQ File Number HQRNORM APPLY 00006251AM25 RA File Number 03AX04005771 AM25 Licence No and Date 0311041403/17/02/2025 comments of Meity dated 15.10.2025 and its clarification dated 23.12.2025, as under:

SL. ITEM OF EXPORT ITEM OF QUANTITY IMPORT QUANTITY UDIN00566753AM26

ce No and Date 0311041403/17/02/2025 comments of Meity dated 15.10.2025 and its clarification dated 23.12.2025, as under:

SL. ITEM OF EXPORT ITEM OF QUANTITY IMPORT QUANTITY UDIN00566753AM26

66 No. EXPORT UOM IMPORT ALLOWED UOM 1 Optical Fibre Cable - 12F 1335.78 KM Single Mode Fibre 16590.39 KM

1335.78

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 55671.77 KG

1335.78

MDPE 63059.03 KG 2 Optical Fibre Cable - 24F 576.30 KM Single Mode Fibre 14315.29 KM

576.30

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 24161.71 KG

576.30

MDPE 27205.77 KG 3 Optical Fibre Cable - 48F 798.17 KM Single Mode Fibre 39653.09 KM

798.17

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 33463.74 KG

798.17

MDPE 37679.73 KG 4 Optical Fibre Cable - 72F 118.00 KM Single Mode Fibre 8793.36 KM

118.00

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 5101.86 KG

118.00

MDPE 5570.50 KG Optical Fibre Single Mode 5 399.78 KM 39722.14 KM UDIN00566753AM26

M Single Mode Fibre 8793.36 KM

118.00

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 5101.86 KG

118.00

MDPE 5570.50 KG Optical Fibre Single Mode 5 399.78 KM 39722.14 KM UDIN00566753AM26

67 Cable - 96F Fibre

399.78

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 19381.81 KG

399.78

MDPE 29549.47 KG 6 Optical Fibre Cable - 144F 967.14 KM Single Mode Fibre 144142.55 KM

967.14

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 60822.35 KG

967.14

MDPE 82963.90 KG 7 Optical Fibre Cable - 288F 382.05 KM Single Mode Fibre 113881.46 KM

382.05

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 29032.00 KG

382.05

MDPE 38750.93 KG 8 Optical Fibre Cable - 432F 3.05 KM Single Mode Fibre 1363.72 KM

3.05

ECCS Tape (Co- Polymer Coated Ms Eccs Tape) 279.70 KG

3.05
MDPE 340.35 KG

UDIN00566753AM26

68

Case No. 123 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name MAKSTEEL WIRE HEALDS PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00006258AM25 RA File Number 34AX04000995 AM25 Licence No and Date 3411006099/17/02/2025

Case No. 124 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00006312AM25 RA File Number 05AX04003603 AM25 Licence No and Date 0511031012/20/02/2025

Case No. 125 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006386AM25 RA File Number 09AX04001027 AM25 Licence No and Date 0911009100/24/02/2025

SL NO ITEM OF EXPORT QUANTITY

Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006386AM25 RA File Number 09AX04001027 AM25 Licence No and Date 0911009100/24/02/2025

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WHAT AGE TO BE ALLOWED UDIN00566753AM26

69 1 TURBINE BLADES (MADE FROM STAINLESS STEEL PLATE GRADE: AISI431) NET CONTENT OF IMPORT ITEM SHALL BE 576.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

96 NOS STAINLESS STEEL PLATE, GRADE: AISI431

3235.62 KGS INCLUSIVE OF 461.74% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF STAINLESS STEEL IN THE EXPORT PRODUCT.

Case No. 126 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006434AM25 RA File Number 31AX04000410 AM25 Licence No and Date 3111004462/25/02/2025

Case No. 127 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006500AM25 RA File Number 05AX04003868 AM25 Licence No and Date 0511031165/03/03/2025 UDIN00566753AM26

y Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006500AM25 RA File Number 05AX04003868 AM25 Licence No and Date 0511031165/03/03/2025 UDIN00566753AM26

70 comments of DPIIT dated 22.12.2025, as under:

Net weights of export items at Sl.No.1 to 9 may be specified as under: 1. S. No. Net Weight/Piece (Kgs.) S. No. Net Weight/Piece (Kgs.) 1 34.5 Kgs. 6 36.5 Kgs. 2 36.5 Kgs. 7 36 Kgs. 3 39.5 Kgs. 8 36 Kgs. 4 35.5 Kgs. 9 32.5 Kgs. 5 38.5

Quantity of import items at Sl.No.1 to 16, 20,24, 25 , 31 to 37, 40, 44 to 49, 55 to 60, 63, 64, 68 to 72, 78 to 84, 87, 91 to 96, 102 to 107,110, 111,115, 116, 122 to 126, 129, 130, 134, 135, 141 to 145, 148 ,149, 153, 154, 160 to 166, 169,173 to 179, 185 to 190, 194, 198 and 199 may be allowed may be allowed on net to net basis in the export items. 2. Quantity of import items at SI No.17, 38, 61, 85, 108, 127, 146, 167 and 191, may be allowed as 1.01 Kgs./Kg. content in the respective export items as claimed by the firm. 3. Quantity of import items at SI No. 18, 19, 26 to 30, 39,50 to 54, 62, 73 to 77, 86, 97 to 101, 109, 117 to 121, 128, 136 to 140, 147,155 to 159, 168, 180 to 184, 192, 193 and 200 to 204 may be allowed as 1.01 Kgs./Kg content in the respective export items. 4. Quantity of import items at SI No. 21 to 23, 41 to 43, 65 to 67, 88 to 90, 112 to 114, 131 to 133, 150 to 152, 170 to 172 and 195 to 197 may be allowed as 1.04 Kgs./Kg. content in the respective export items as claimed by the firm.
5.

1 to 43, 65 to 67, 88 to 90, 112 to 114, 131 to 133, 150 to 152, 170 to 172 and 195 to 197 may be allowed as 1.04 Kgs./Kg. content in the respective export items as claimed by the firm.
5.

Case No. 128 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name DOZCO (INDIA) PVT LTD Meeting Number and Date HQ File Number HQRNORM REVIW00004335AM26 RA File Number 05AX04004137 AM25 UDIN00566753AM26

71 Licence No and Date 0511031167/03/03/2025 comments of Consultant (Tech-3) dated 09.01.2026, as under:

EP - 22845 kg. Import -24680 kg. after recovery. Note: Grade of item of import will be same as used in EP.

Case No. 129 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006614AM25 RA File Number 34AX04001040 AM25 Licence No and Date 3411006160/07/03/2025

Case No. 130 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006662AM25 RA File Number 05AX04004179 AM25 Licence No and Date 0511031314/12/03/2025 UDIN00566753AM26

5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006662AM25 RA File Number 05AX04004179 AM25 Licence No and Date 0511031314/12/03/2025 UDIN00566753AM26

72

Quantity of import item at Sl.No. 4 in Nos. also in addition to its weight 6.

Case No. 131 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name SUMIRIKO IMPERIAL HYDRAULICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006697AM25 RA File Number 05AX04004296 AM25 Licence No and Date 0511031378/17/03/2025

Case No. 132 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006786AM25 RA File Number 03AX04006439 AM25 Licence No and Date 0311042338/20/03/2025

Case No. 133 / NC/1/MEET/Jan/202526/15 Case Status Case Approved UDIN00566753AM26

73 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006888AM25 RA File Number 09AX04001112 AM25 Licence No and Date 0911009295/25/03/2025 comments of Consultant (SKB) dated 02.01.2026 , as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADE (NET CONTENT OF IMPORT ITEM SHALL BE 2,100.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE). 4200 NOS

STAINLESS STEEL BARS (GRADE: 17- 4PH, 140 MM RCS) QTY: 17640.00 KGS 11214.00 KGS INCLUSIVE OF 434% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

0 NOS

STAINLESS STEEL BARS (GRADE: 17- 4PH, 140 MM RCS) QTY: 17640.00 KGS 11214.00 KGS INCLUSIVE OF 434% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL BARS SHOULD MATCH THE GRADE OF

Case No. 134 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006889AM25 RA File Number 09AX04001096 AM25 Licence No and Date 0911009296/25/03/2025 UDIN00566753AM26

74

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: CB403-60 MM) NET CONTENT OF 15,388.12 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 37532 NOS (STAINLESS STEEL BARS) GRADE: CB-403- 60 MM 43537.60 KGS INCLUSIVE OF 182.93% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 2 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: CB403-85 MM) NET CONTENT OF 9,765.97 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 10973 NOS (STAINLESS STEEL BARS) GRADE: CB- 403- 85 MM, 18873.74 KGS INCLUSIVE OF 93.26% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 3 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: GTD-450-100 MM RCS).

3- 85 MM, 18873.74 KGS INCLUSIVE OF 93.26% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 3 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: GTD-450-100 MM RCS). NET CONTENT OF IMPORT ITEM SHALL BE 10,105.05 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 2323 NOS (STAINLESS STEEL BARS) GRADE: GTD-450 -100MM RCS, 18328.54 KGS INCLUSIVE OF 81.38% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 4 TURBINE BLADES 699 NOS (STAINLESS STEEL 3680.05 KGS INCLUSIVE OF UDIN00566753AM26

75 (MADE FROM STAINLESS STEEL BAR, GRADE: GTD-450-150 MM RCS). NET CONTENT OF IMPORT ITEM SHALL BE 2,166.90 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. BARS) GRADE: GTD-450 -150MM RCS, 69.83% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 5 TURBINE BLADES,
(MADE FROM STAINLESS STEEL BAR, GRADE: GTD-450-70 MM RCS). NET CONTENT OF 8,914.10 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

13714 NOS (STAINLESS STEEL BARS) GRADE: GTD-450 -70MM RCS, 27565.07 KGS INCLUSIVE OF 209.23% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STAINLESS-STEEL BARS SHOULD MATCH THE GRADE OF

Case No. 135 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006890AM25 RA File Number 09AX04001111 AM25 Licence No and Date 0911009297/25/03/2025 UDIN00566753AM26

5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006890AM25 RA File Number 09AX04001111 AM25 Licence No and Date 0911009297/25/03/2025 UDIN00566753AM26

76

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM STEEL BAR, GRADE: 13-8 PH) NET CONTENT OF 111.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 740 NOS STEEL BAR, GRADE: 13-8 PH QTY: 1073.00 KGS 777.00 KGS INCLUSIVE OF 600.00% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM.

NOTE: THE GRADE OF IMPORTED STEEL BARS SHOULD MATCH THE GRADE OF STEEL OF THE EXPORT ITEM.

Case No. 136 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006900AM25 RA File Number 09AX04001171 AM25 Licence No and Date 0911009307/26/03/2025

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED UDIN00566753AM26

ORM APPLY 00006900AM25 RA File Number 09AX04001171 AM25 Licence No and Date 0911009307/26/03/2025

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED UDIN00566753AM26

77 (STAINLESS STEEL BARS) GRADE: 10705BA, SIZE: 135X178, 118X146, 118X175, 59X177, MM 14790.60 KGS INCLUSIVE OF 642.50% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 1 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: 10705BA) NET CONTENT OF IMPORT ITEM SHALL BE 1992.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 830 NOS COOLANT OIL,
(IPOL CUT 150 T (CNC/VMC) 1% OF THE FOB VALUE (STAINLESS STEEL BARS) GRADE: 10705BU, SIZE: 42X167, 40X154, 42X281, 36X283, 33X265, 29X245, 36X265 MM 4814.97KGS INCLUSIVE OF 531.82% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 2 TURBINE BLADES, (MADE FROM STAINLESS STEEL BAR, GRADE: 10705BU) NET CONTENT OF IMPORT ITEM SHALL BE 762.08 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

866 NOS COOLANT OIL,
(IPOL CUT 150 T (CNC/VMC) 1% OF THE FOB VALUE (STAINLESS STEEL BARS) GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 29X115, 81X157, 36X116, MM 24345.45KGS INCLUSIVE OF 727.03% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT ITEM. 3 TURBINE BLADES
(MADE FROM STAINLESS STEEL BAR, GRADE: 10705MBU) NET CONTENT OF IMPORT ITEM SHALL BE 2943.72 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

TEM. 3 TURBINE BLADES
(MADE FROM STAINLESS STEEL BAR, GRADE: 10705MBU) NET CONTENT OF IMPORT ITEM SHALL BE 2943.72 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

3978 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC) 1% OF THE FOB VALUE UDIN00566753AM26

78

NOTE: THE GRADE OF IMPORTED STAINLESS-STEEL BARS SHOULD MATCH THE GRADE OF

Case No. 137 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006932AM25 RA File Number 05AX04004438 AM25 Licence No and Date 0511031642/28/03/2025

Information about the inputs required per unit of the resultant product as per Sl. No. 1 of Appendix-11A appearing in current HBP (Vol.I) separately for each product. 2. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 3. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables. 4. 5.

Case No. 138 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006943AM25 RA File Number 31AX04000488 AM25 Licence No and Date 3111004611/28/03/2025 UDIN00566753AM26

rty Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006943AM25 RA File Number 31AX04000488 AM25 Licence No and Date 3111004611/28/03/2025 UDIN00566753AM26

79

Case No. 139 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name VINAYAKA INDUSTRIAL ENTERPRISES, Meeting Number and Date HQ File Number HQRNORM APPLY 00000071AM26 RA File Number 07AX04002041 AM25 Licence No and Date 0711014077/02/04/2025

Case No. 140 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name EPE PROCESS FILTERS AND ACCUMULATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000083AM26 RA File Number 09AX04001226 AM25 Licence No and Date 0911009360/03/04/2025

Detail technical note on manufacturing process including the relevant flow sheet. 1. furnished. 2. 3. Use of export product. 4. Length of EP is higher than length of pipe to be imported. Please explain. 5.

UDIN00566753AM26

uring process including the relevant flow sheet. 1. furnished. 2. 3. Use of export product. 4. Length of EP is higher than length of pipe to be imported. Please explain. 5.

UDIN00566753AM26

80 Case No. 141 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name NOV MFG INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000113AM26 RA File Number 31AX04000478 AM25 Licence No and Date 3111004637/07/04/2025

1. Submit a neat sketch of each item of export with clear dimensions of the input material and export product. Also, submit the initial weight of the input material and the finished weight.
2. The description of the export and import items is vague. Submit a description of the export item in layman's language.
3. Submit the Mill Test Certificate (MTC) of each input material.
4. How is a bar bent and converted into the form of a U shape? How are teeth and grooves cut? Submit a detailed process of manufacturing.
5. Submit a video film of the process.
6. Submit process flow chart and wastage at each stage of operation.
7. Will the export product need indigenous inputs? If yes, furnish the export weight of each input and the net content of imported input.

Case No. 142 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000141AM26 RA File Number 08AX04000036 AM26 Licence No and Date 0811014670/08/04/2025 UDIN00566753AM26

y Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000141AM26 RA File Number 08AX04000036 AM26 Licence No and Date 0811014670/08/04/2025 UDIN00566753AM26

81 1. 2. 3. 4. 5.

Case No. 143 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000206AM26 RA File Number 08AX04000051 AM26 Licence No and Date 0811014686/11/04/2025 1. 2. 3. 4. 5.

Case No. 144 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name LINEOMATIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000227AM26 UDIN00566753AM26

82 RA File Number 08AX04000080 AM26 Licence No and Date 0811014703/15/04/2025 1. 2. 3. 4. 5.

Case No. 145 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000431AM26 RA File Number 07AX04000125 AM26 Licence No and Date 0711014264/24/04/2025 comments of MHI dated 05.01.2026, as under:

Export products: Rice Parboiling Machinery Import items: Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201 S. No. Item description Net wt. (MT) %Wastage on net content basis to be allowed after 1/3rd recovery Qty. to be allowed (MT) 1 Non-Magnetic Stainless Steel Cold 20.750 13.65% 23.58 UDIN00566753AM26

cription Net wt. (MT) %Wastage on net content basis to be allowed after 1/3rd recovery Qty. to be allowed (MT) 1 Non-Magnetic Stainless Steel Cold 20.750 13.65% 23.58 UDIN00566753AM26

83 Rolled Coils, Grade 201Thickness 1.15Mm Thickness Tolerance (1.12- 1.18) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 2 Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201Thickness 1.45Mm Thickness Tolerance (1.42- 1.48) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 62.250 13.65% 70.75 3 Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201Thickness 1.85Mm Thickness Tolerance (1.72- 1.85) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 20.750 13.65% 23.58 4 Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201Thickness 2.75Mm Thickness Tolerance (2.73- 2.78) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 20.750 13.65% 23.58

Case No. 146 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000873AM26 RA File Number 07AX04000265 AM26 Licence No and Date 0711014462/16/05/2025 UDIN00566753AM26

SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000873AM26 RA File Number 07AX04000265 AM26 Licence No and Date 0711014462/16/05/2025 UDIN00566753AM26

84 comments of MHI dated 05.01.2026, as under:

Export products: Rice Parboiling Machinery Import items: Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201 S. No. Item description Net wt. (MT) %Wastage on net content basis to be allowed after 1/3rd recovery Qty. to be allowed (MT) 1 NON MAGNETIC STAINLESS STEEL COLD ROLLED COILS GRADE 201 Thickness 1.45Mm Thickness Tolerance (1.38-1.48) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 19.090 13.65% 21.70 2 ROLLED COILS GRADE 201 Thickness 1.45Mm Thickness Tolerance (1.38-1.48) Width 1000Mm Width Tolerance(1000mm-1250mm) Finish No.2B 38.180 13.65% 43.39 3 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.4 47.725 13.65% 54.24 4 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 19.090 13.65% 21.70 5 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1000Mm Width Tolerance(1000mm-1250mm) Finish No.2B 9.545 13.65% 10.85 6 ROLLED COILS GRADE 201 Thickness 2.35Mm Thickness Tolerance (2.33-2.37) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 28.635 13.65% 32.55 UDIN00566753AM26

ish No.2B 9.545 13.65% 10.85 6 ROLLED COILS GRADE 201 Thickness 2.35Mm Thickness Tolerance (2.33-2.37) Width 1240Mm Width Tolerance(1240mm-1260mm) Finish No.2B 28.635 13.65% 32.55 UDIN00566753AM26

85

Case No. 147 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001133AM26 RA File Number 07AX04000335 AM26 Licence No and Date 0711014569/28/05/2025 comments of MHI dated 05.01.2026, as under:

Export products: Rice Parboiling Machinery Import items: Non-Magnetic Stainless Steel Cold Rolled Coils, Grade 201 S. No. Item description Net wt. (MT) %Wastage on net content basis to be allowed after 1/3rd recovery Qty. to be allowed (MT) 1 ROLLED COILS GRADE 201 Thickness 1.45Mm Thickness Tolerance (1.38-1.48) Width 1250Mm Width Tolerance(1000mm 1250mm) Finish No.4 207.500 13.65% 235.83 2 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1250Mm Width Tolerance(1000mm 1250mm) Finish No.4 114.130 13.65% 129.71 3 ROLLED COILS GRADE 201 Thickness 1.45Mm Thickness Tolerance (1.38-1.48) Width 1000Mm Width Tolerance(1000mm 1250mm) Finish 2B 20.750 13.65% 23.58 UDIN00566753AM26

nish No.4 114.130 13.65% 129.71 3 ROLLED COILS GRADE 201 Thickness 1.45Mm Thickness Tolerance (1.38-1.48) Width 1000Mm Width Tolerance(1000mm 1250mm) Finish 2B 20.750 13.65% 23.58 UDIN00566753AM26

86 4 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1000Mm Width Tolerance(1000mm 1250mm) Finish No.2B 41.500 13.65% 47.17 5 ROLLED COILS GRADE 201 Thickness 1.85Mm Thickness Tolerance (1.78-1.88) Width 1250Mm Width Tolerance(1000mm 1250mm) Finish No.2B 41.500 13.65% 47.17 6 ROLLED COILS GRADE 201 Thickness 2.35Mm Thickness Tolerance (2.33-2.37) Width 1250Mm Width Tolerance(1000mm 1250mm) Finish No.2B 31.130 13.65% 35.38 7 ROLLED COILS GRADE 201 Thickness 1.15Mm Thickness Tolerance (1.11-1.17) Width 1250Mm Width Tolerance(1000mm 1250mm) Finish No.2B 31.130 13.65% 35.38

Case No. 148 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001788AM26 RA File Number 03AX04001555 AM26 Licence No and Date 0311045220/30/06/2025 comments of MHI dated 12.12.2025, as under:

Export Product: Steam Turbine Blades (LDPW Project), 1218 Numbers, Net wt. 1043.90 Kgs. Import item: ALLOY STEEL BAR MTB10AAM / 10705MBU/ 10705BU/ 10705BA, WIDTH=40MM TO 80MM THICKNESS=60M M TO 120MM UDIN00566753AM26

am Turbine Blades (LDPW Project), 1218 Numbers, Net wt. 1043.90 Kgs. Import item: ALLOY STEEL BAR MTB10AAM / 10705MBU/ 10705BU/ 10705BA, WIDTH=40MM TO 80MM THICKNESS=60M M TO 120MM UDIN00566753AM26

87

Wastage allowed on import item:

861.12% wastage on net content basis after recovery may be allowed as against 1234.9% wastage claimed by the firm.

Case No. 149 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001899AM26 RA File Number 03AX04001729 AM26 Licence No and Date 0311045415/07/07/2025 comments of MHI dated 12.12.2025, as under:

Export Product: Steam Turbine Blades (CDBY Project), 494 Numbers, Net wt. 373.80 Kgs. Import item: ALLOY STEEL BAR MTB10AAM / 10705MBU/ 10705BU/ 10705BA, WIDTH 40MM TO 80MM, THICKNESS 60MM TO 100MM

Wastage allowed on import item:

743.50% wastage on net content basis may be allowed after recovery as against 1085.13% wastage claimed by the firm.

Case No. 150 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED UDIN00566753AM26

as against 1085.13% wastage claimed by the firm.

Case No. 150 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED UDIN00566753AM26

88 Meeting Number and Date HQ File Number HQRNORM APPLY 00002103AM26 RA File Number 03AX04001869 AM26 Licence No and Date 0311045684/15/07/2025 comments of MHI dated 12.12.2025, as under:

Export Product: Steam Turbine Blades (XMRV2 5 Project), 2562 Numbers, Net wt. 1894.80 Kgs. Import item: ALLOY STEEL BAR WIDTH =30MM TO 115MM, THICKNESS=45MM TO 205MM, 10705BA,10705BU,10705MBU,MTB10AAM

Wastage allowed on import item:

1003.19% wastage on net content basis may be allowed after recovery as against 1435.78% wastage claimed by the firm.

Case No. 151 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002154AM26 RA File Number 05AX04001289 AM26 Licence No and Date 0511033930/17/07/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE MODEL T30R-M SKID MOUNTED HIGH PRESSURE TEST UNIT (OIL FIELD EQUIPMENT) QUANTITY: 1 NOS UDIN00566753AM26

07/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE MODEL T30R-M SKID MOUNTED HIGH PRESSURE TEST UNIT (OIL FIELD EQUIPMENT) QUANTITY: 1 NOS UDIN00566753AM26

89

ITEMS OF IMPORTS:

Item No 1 to 30: Net to net under GN-4 with accountability clause. i. WASTAGE TO BE ALLOWED: NIL. ii. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. iii.

Case No. 152 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name AMEYA PRECISION ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002371AM26 RA File Number 31AX04000191 AM26 Licence No and Date 3111005122/29/07/2025 comments of Consultant (SKB) dated 15.12.2025, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED QUANTITY &WASTAGE TO BE ALLOWED

1 COVER 12-2500 FRG WYE GS

74.60 KGS FORGED BAR OD 281mm x 309mm Long

QTY: 150.00 KGS 124.87KG INCLUSIVE OF 67.38% WASTAGE AFTER TAKING 1/3RD RECOVERY FROM SCRAP

NOTE: THE GRADE AND COMPOSITION OF THE IMPORTED ITEM SHOULD BE MATCHED UDIN00566753AM26

Long

QTY: 150.00 KGS 124.87KG INCLUSIVE OF 67.38% WASTAGE AFTER TAKING 1/3RD RECOVERY FROM SCRAP

NOTE: THE GRADE AND COMPOSITION OF THE IMPORTED ITEM SHOULD BE MATCHED UDIN00566753AM26

90 WITH THE GRADE AND COMPOSITION OF THE EXPORTED PRODUCT.

Case No. 153 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002551AM26 RA File Number 05AX04001603 AM26 Licence No and Date 0511034343/07/08/2025

Quantities of import item at Sl. No. 1 in Nos. also in addition to its weight. 6. Justification/basis for the quantities of welding materials supported by following information: 7. Weight of steel, which requires imported welding materials, giving break-up of: a. Steel Plates / Sheets upto 30 mm thickness. i. Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates / Sheets more than 70 mm thickness. iii. Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc. iv. b. Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses.

Case No. 154 / NC/1/MEET/Jan/202526/15 UDIN00566753AM26

iv. b. Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses.

Case No. 154 / NC/1/MEET/Jan/202526/15 UDIN00566753AM26

91 Case Status Case Approved Party Name FINEPAC STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002558AM26 RA File Number 31AX04000210 AM26 Licence No and Date 3111005156/07/08/2025 comments of DPIIT dated 26.12.2025, as under:

Net weight of export items at SI.No 1 to 7 may be specified as under: 1.

SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) 1 487.47 5 132.02 2 103.77 6 241.85 3 169.05 7 150.84 4 1177

2.Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 450.66 Kgs as 1.28 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 3. Import item at SI No.2 shall be of relevant grade and mesh size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 58.33 Kgs as 1.10 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 4. Import item at SI No.3 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 37 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.1
after taking 1/3rd recovery from the scrap. 5 .

contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 37 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.1
after taking 1/3rd recovery from the scrap. 5 . Import item at SI No.4 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 119 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. UDIN00566753AM26

92 6. Import item at SI No.5 shall be of relevant grade and mesh size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 75 Kgs as 1.11 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 7. Import item at SI No.6 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 52.33 Kgs as 1.34 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 8. Import item at SI No.7 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 1519.66 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 9. Import item at SI No.8 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 2.66 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 10.

contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 2.66 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 10. Import item at SI No.9 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 115.33 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 11. Import item at SI No.10 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 160.66 Kgs as 1.13 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap.

Case No. 155 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name FRIZAIR PRIVATE LIMITED (PART IX) Meeting Number and Date HQ File Number HQRNORM APPLY 00002626AM26 RA File Number 09AX04000490 AM26 Licence No and Date 0911010249/12/08/2025

Case No. 156 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002650AM26 UDIN00566753AM26

/ NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002650AM26 UDIN00566753AM26

93 RA File Number 03AX04002397 AM26 Licence No and Date 0311046492/12/08/2025 comments of MHI dated 12.12.2025, as under:

Export Product: Steam Turbine Blades (DNJN Project), 636 Numbers, Net wt. 217.50 Kgs. Import item: ALLOY STEEL BAR, WIDTH=30MM TO 70MM, THICKNESS=50MM TO 90MM, 10705BA10705BU, 10705MBU, MTB10AAM

Wastage allowed on import item:

906.03 % wastage on net content basis after recovery may be allowed as against 1325.29% wastage claimed by the firm.

Case No. 157 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name MICRO INDIA ENGINEERING Meeting Number and Date HQ File Number HQRNORM APPLY 00002701AM26 RA File Number 31AX04000206 AM26 Licence No and Date 3111005176/14/08/2025 comments of Consultant (SKB) dated 15.12.2025, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED BEARING HOUSING / BOTTOM BEARING ROUND BARS / SPE ROUGHPEELED / BN WASTAGE @141.17% ON THE NET WEIGHT 1 70 NOS UDIN00566753AM26

EM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED BEARING HOUSING / BOTTOM BEARING ROUND BARS / SPE ROUGHPEELED / BN WASTAGE @141.17% ON THE NET WEIGHT 1 70 NOS UDIN00566753AM26

94 HOUSING NET CONTENT 8.5 KG X 70 NOS= TOTAL 595.00KG OF RELEVANT GRADE AND SPECIFICATION GRADE 415M DIM:173MM OF EXPORT PRODUCT. 2 PORT BOSS NET CONTENT 6.5 KG X160 NOS= TOTAL 1040KG 160 NOS ROUND BARS / SPE ROUGHPEELED / BN OF RELEVANT GRADE AND SPECIFICATION GRADE 415M DIM:173MM WASTAGE @107.69% ON THE NET WEIGHT OF EXPORT PRODUCT.

NOTE: THE GRADE OF THE IMPORTED ITEM SHOULD MATCH THE GRADE OF STEEL OF THE EXPORT PRODUCT.

Case No. 158 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name FABEX STEEL STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003010AM26 RA File Number 09AX04000574 AM26 Licence No and Date 0911010393/03/09/2025 comments of Consultant (SKB) dated 08.01.2026 , as under:

SL No ITEM OF EXPORT QUANTITY ITEMS OF IMPORT WASTAGE TO BE ALLOWED HOT ROLLED STEEL PLATES 5 X 2000 X 6000 MM, AS PER S355JR GRADE. 3% ON THE NET WEIGHT OF 5MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL 3% ON THE NET 1 PRE-FABRICATED STEEL STRUCTURE

2333.34 MTS UDIN00566753AM26

AS PER S355JR GRADE. 3% ON THE NET WEIGHT OF 5MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL 3% ON THE NET 1 PRE-FABRICATED STEEL STRUCTURE

2333.34 MTS UDIN00566753AM26

95 PLATES 6 X 2000 X 6000 MM, AS PER S355JR GRADE. WEIGHT OF 6 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 8 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 8 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 10 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 10 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 12 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 12 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 16 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 16 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 20 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 20 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 25 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 25MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 30 X 2000 X 6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 30 MM STEEL PLATE IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STEEL PLATES SHOULD MATCH THE GRADE OF STEEL UDIN00566753AM26

6000 MM, AS PER S355JR GRADE 3% ON THE NET WEIGHT OF 30 MM STEEL PLATE IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STEEL PLATES SHOULD MATCH THE GRADE OF STEEL UDIN00566753AM26

96 PLATES OF THE EXPORT PRODUCT.

Case No. 159 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name NUCON AEROSPACE PRIVATE LIMITED HQ File Number HQRNORM APPLY 00003048AM26 RA File Number 09AX04000600 AM26 Licence No and Date 0911010405/04/09/2025 comments of Consultant (SKB) dated 08.01.2026 and 16.01.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY AND WASTAGE TO BE ALLOWED 1 HOUSING, NUT AHS11222 (NET WEIGHT: 459.30 KGS) 3 NOS 235X265X350 THK ALLOY STEEL UNS G43406, G43400, G41400 OR G86300 AMS6454 PLATE QTY: 513.18 KGS 511.66 KGS INCLUSIVE OF 11.40% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 2 VALVE BLOCK 7249283 (NET WEIGHT: 120.36 KGS)

4 NOS AL. ALLOY 6061 FORGINGS 560X220X100 QTY: 133.88 KGS

131.91 KGS INCLUSIVE OF 9.60% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. RAIL, GUIDE-LESS COATING AHS10356-S (NET WEIGHT: 231.30 90X110X1600MM THK ALLOY STEEL UNS G43400 OR UNS G43406 365.64 KGS INCLUSIVE OF 58.08% WASTAGE ON THE NET CONTENT 3 3 NOS UDIN00566753AM26

-LESS COATING AHS10356-S (NET WEIGHT: 231.30 90X110X1600MM THK ALLOY STEEL UNS G43400 OR UNS G43406 365.64 KGS INCLUSIVE OF 58.08% WASTAGE ON THE NET CONTENT 3 3 NOS UDIN00566753AM26

97 KGS)

ASTM A 322, GRAIN SIZE-FINE FORGED PLATE QTY: 372.93 KGS OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 95X220X610MM THK ALLOY STEEL UNS G414000.025 S MAX AND 0.025 P MAX AMS 6382 FORGING PLATE QTY: 300.15 KGS 293.17 KGS INCLUSIVE OF 35.50% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 4 HOUSING ASSY AHS10492 (NET WEIGHT: 333.93 KGS)

3 NOS 55X220X610MM THK ALLOY STEEL UNS G414000.025 S MAX AND 0.025 P MAX AMS 6382 FORGING PLATE QTY: 173.76 KGS 169.59 KGS INCLUSIVE OF 44.25% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 5 ARM, EXTRACTOR AHS10449 (NET WEIGHT: 595.59 KGS)

3 NOS 95MM THK ALLOY STEEL HY-100, TY-II, UNS K32045 NAVSEA TECH PUB T9074-BD- GIB-010/0300 APPENDIX B PLATE QTY: 825.83 KGS 821.61 KGS INCLUSIVE OF 37.95% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 6 BEARING HOUSING AHS11301 (NET WEIGHT: 862.05 KGS)

3 NOS 203MM ALLOY STEEL HY-80,UNS K31820 NAVSEA AAVSEA TECH PUB T9074-BD-GIB- 010/0300 APPENDIX E FORGING PLATE QTY: 1033.53 KGS 1017.30 KGS INCLUSIVE OF 18.01% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 203MM ALLOY STEEL HY-80,UNS K31820 NAVSEA AAVSEA TECH PUB T9074-BD-GIB- 1132.67 KGS INCLUSIVE OF 20.23% WASTAGE ON THE NET CONTENT

CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 203MM ALLOY STEEL HY-80,UNS K31820 NAVSEA AAVSEA TECH PUB T9074-BD-GIB- 1132.67 KGS INCLUSIVE OF 20.23% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY 7 BEARING HOUSING AHS11302 (NET WEIGHT: 942.09 KGS) 3 NOS UDIN00566753AM26

98 010/0300 APPENDIX E FORGING PLATE QTY: 1158.78 KGS STEEL IN THE EXPORT PRODUCT. 8 ROTATE CABLE CARRIER BRACKET AHS11230 (NET WEIGHT: 63.06 KGS) 3 NOS 101.6X130X690MM AL. ALLOY 5083 TEMPER H32; TEMPER H321 OR H116; UNS A9/ ASTM B209/ ASTM B928,5083 PLATE QTY: 72.78 KGS 71.97 KGS INCLUSIVE OF 14.14% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 9 CROSS MEMBER, CABLE TRAY AHS10217 (NET WEIGHT: 392.85 KGS) 9 NOS 95X145X1426MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 1485 KGS 1221.57 KGS INCLUSIVE OF 210.95% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 10 CROSS MEMBER, CABLE TRAY AHS11214 (NET WEIGHT: 248.04 KGS) 9 NOS 90X112X1366MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 1040.85 KGS 800.03 KGS INCLUSIVE OF 222.54% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 11 CROSS MEMBER, CABLE TRAY AHS11272

(NET WEIGHT: 196.92 KGS) 9 NOS 90X112X1366MM AL.

CLUSIVE OF 222.54% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 11 CROSS MEMBER, CABLE TRAY AHS11272

(NET WEIGHT: 196.92 KGS) 9 NOS 90X112X1366MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 1040.85 KGS 784.50 KGS INCLUSIVE OF 298.39% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 12 CROSS MEMBER, CABLE TRAY AHS11273 (NET WEIGHT: 165.60 KGS) 3 NOS 120X138X1638MM AL.ALLOY 7075 TEMPER T-73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 227.85 KGS 218.94 KGS INCLUSIVE OF 32.21% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. UDIN00566753AM26

99 13 CROSS MEMBER, CABLE TRAY AHS11537 (NET WEIGHT: 156.21 KGS) 3 NOS 95X145X1698MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075/ TEMPER T7351 ASTM B247 PLATE QTY: 196.47 KGS 191.51 KGS INCLUSIVE OF 22.60 % WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 14 CROSS MEMBER, CABLE TRAY AHS11538 (NET WEIGHT: 78.87 KGS) 3 NOS 90X112X1638MM AL .ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 138.69 KGS 130.05 KGS INCLUSIVE OF 64.89% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 15 CROSS MEMBER, CABLE TRAY AHS11539 (NET WEIGHT: 52.30 KGS) 1 NOS 120X138X1366MM AL.

S INCLUSIVE OF 64.89% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 15 CROSS MEMBER, CABLE TRAY AHS11539 (NET WEIGHT: 52.30 KGS) 1 NOS 120X138X1366MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 63.34 KGS 61.94 KGS INCLUSIVE OF 18.43% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 16 CROSS MEMBER, CABLE TRAY AHS11550

(NET WEIGHT: 100.05 KGS) 3 NOS 90X112X1638MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 138.69 KGS 133.07 KGS INCLUSIVE OF 33.0% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 17 CROSS MEMBER, CABLE TRAY AHS11551

(NET WEIGHT: 138.0 KGS) 3 NOS 120X136X1366 MM AL. ALLOY 7075 EMPER T-73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 187.26 KGS 181.08 KGS INCLUSIVE OF 31.22% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. CROSS MEMBER, CABLE TRAY AHS11564.

45X136X1426MM AL. ALLOY 7075 TEMPER T- 73 OR T7352: UNS A97075/ T7451 ASTM B247/ AMS 4050 & ASTM 69.88 KGS INCLUSIVE OF 46.87% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN 18 3 NOS UDIN00566753AM26

TEMPER T- 73 OR T7352: UNS A97075/ T7451 ASTM B247/ AMS 4050 & ASTM 69.88 KGS INCLUSIVE OF 46.87% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN 18 3 NOS UDIN00566753AM26

100 (NET WEIGHT: 47.58 KGS) B594 PLATE QTY: 73.20 KGS THE EXPORT PRODUCT. 19 CROSS MEMBER, CABLE TRAY AHS11655

(NET WEIGHT: 156.90 KGS) 3 NOS 120X136X1366MM AL.ALLOY 7075 TEMPER T-73 OR T7352: UNS A97075 ASTM B247 PLATE QTY: 187.26 KGS 183.46 KGS INCLUSIVE OF 16.93% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 20 BRACKET, CABLE HUB AHS11464

( NET WEIGHT: 84.867 KGS)

3 NOS

20 (I) WEB, VERTICAL BRACKET (NET WEIGHT: 27.546 KGS) 3 NOS 9.525MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE

QTY: 29.87 KGS 29.84 KGS INCLUSIVE OF 8.35% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20(II) WEB, VERTICAL BRACKET

(NET WEIGHT: 27.546 KGS) 3 NOS 9.525MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE.

QTY: 29.87 KGS 29.84 KGS INCLUSIVE OF 8.35% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. MOUNT, LOWER BRACKET

(NET WEIGHT: 2.775 19.05MM THK SS 17-4PH, UNS S17400ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE.

20(III) 3 NOS 3.60 KGS INCLUSIVE OF 29.98% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

00ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE.

20(III) 3 NOS 3.60 KGS INCLUSIVE OF 29.98% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. UDIN00566753AM26

101 KGS) QTY: 3.73 KGS 20(IV) MOUNT TOP BRACKET

(NET WEIGHT: 2.775 KGS) 3 NOS 19.05MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE.

QTY: 3.73 KGS 3.60 KGS INCLUSIVE OF 29.98% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20(V) MOUNT HUB BRACKET

(NET WEIGHT: 15.24 KGS) 3 NOS 25.4MM THK SS 17-4PH, UNS S17400 H1150 AMS 5643 OR 5622 PLATE

QTY: 18.18 KGS 18.14 KGS INCLUSIVE OF 19.03% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20(VI) FLANGE, TOP BRACKET

(NET WEIGHT: 2.40 KGS) 3 NOS 6.35MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE

QTY: 11.28 KGS 11.11 KGS INCLUSIVE OF 363.33% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20 (VII) FLANGE, VERTICAL BRACKET (NET WEIGHT: 3.87 KGS) 3 NOS 6.35MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622, AMS 5604 PLATE QTY: 4.59 KGS 4.58 KGS INCLUSIVE OF 18.34% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20 (VIII) STIFFNER BRACKET

(NET WEIGHT: 5.49 KGS)

3 NOS 6.35MM THK SS 17-4PH, UNS S17400 ANNEALED COND.

34% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 20 (VIII) STIFFNER BRACKET

(NET WEIGHT: 5.49 KGS)

3 NOS 6.35MM THK SS 17-4PH, UNS S17400 ANNEALED COND. AMS 5643 OR 5622 PLATE.

QTY: 6.01 KGS 6.00 KGS INCLUSIVE OF 9.29% WASTAGE ON THE NET CONTENT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. TRACK, CHAIN 70X104X1310MM THK 160.91 KGS INCLUSIVE 21 3 NOS UDIN00566753AM26

102 AHS10349

(NET WEIGHT: 150.81 KGS) ALLOY STEEL UNS G41400 0.025 S MAX AND 0.025 P MAX AMS 6382 FORGED ROD.

QTY: 224.52 KGS OF 6.70% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 22 HOUSING, THRUST BEARING AHS10503

(NET WEIGHT:
120.651KGS) 3 NOS 125X170X300MM ALLOY STEEL UNS G43400 OR G43406, AMS 6415 FORGING.

QTY: 150.10 KGS 147.74 KGS INCLUSIVE OF 22.45% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 23 STRONGBACK, CARRIAGE AHS10601

(NET WEIGHT: 172.98 KGS) 3 NOS 50.8MM THK AL ALLOY 7050 UNS A97050, T7451 SAE AMS 4050 PLATE.

QTY: 204.06 KGS 201.30 KGS INCLUSIVE OF 16.37% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 24 CLEVIS, ROLLER MOUNT AHS10652

(NET WEIGHT:
164.868 KGS) 12 NOS DIA 120MM THK ALLOY STEEL UNS G43400, G41420, G41400 OR G43406 ASTM A322 PLATE

QTY: 306.72 KGS 296.60 KGS INCLUSIVE OF 79.9% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 25 COVER AHS10919

(NET WEIGHT: 25.11 KGS) 9 NOS 3.2MM THK AL ALLOY 6061, UNS A96061

.60 KGS INCLUSIVE OF 79.9% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 25 COVER AHS10919

(NET WEIGHT: 25.11 KGS) 9 NOS 3.2MM THK AL ALLOY 6061, UNS A96061 TEMPER T6, T62 OR T651AMS 4027 OR ASTM B209 SHEET

QTY: 28.89 KGS 28.30 KGS INCLUSIVE OF 12.70% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 26 PINION HOUSING 3 NOS 165MM THK ALLOY 197.27 KGS INCLUSIVE UDIN00566753AM26

103 AHS11328

(NET WEIGHT: 174.27 KGS) STEEL UNS UNS G43406, G43400, G41400 OR G86300 EXCEPT 0.025 S MAX AND 0.025 P MAX FINE GRAIN SIZE AMS QTY: 199.80 KGS OF 13.20% WASTAGE ON THE NET CONTENT OF IMPORTED ALLOY STEEL IN THE EXPORT PRODUCT. 27 VALVE-BLOCK 2527707

(NET WEIGHT: 159.50 KGS)

2 NOS AL. ALLOY FORGING 530X300X220.

QTY: 190.08 KGS 188.85 KGS INCLUSIVE OF 18.40% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT. 28 FORGING 7249500

(NET WEIGHT: 436.52 KGS) 14 NOS AL. ALLOY FORGING 180X260X280.

QTY: 498.40 KGS 497.90 KGS INCLUSIVE OF 14.06% WASTAGE ON THE NET CONTENT OF IMPORTED ALUMINIUM ALLOY IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED ITEMS SHOULD BE MATCHED WITH THE GRADE OF THE EXPORT ITEMS.

Case No. 160 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003115AM26 RA File Number 05AX04001970 AM26 Licence No and Date 0511035002/10/09/2025 UDIN00566753AM26

5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003115AM26 RA File Number 05AX04001970 AM26 Licence No and Date 0511035002/10/09/2025 UDIN00566753AM26

104

Case No. 161 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003116AM26 RA File Number 05AX04001837 AM26 Licence No and Date 0511035003/10/09/2025

Case No. 162 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name GMM PFAUDLER LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003130AM26 RA File Number 03AX04002916 AM26 Licence No and Date 0311047198/10/09/2025

Details of import items and their use in the export item. 1. furnished. 2. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 3. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables. 4.

Case No. 163 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED UDIN00566753AM26

requirement of components as spares. Raw Material / Consumables. 4.

Case No. 163 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED UDIN00566753AM26

105 Meeting Number and Date HQ File Number HQRNORM APPLY 00003181AM26 RA File Number 05AX04001985 AM26 Licence No and Date 0511035072/12/09/2025 comments of DPIIT dated 22.12.2025, as under:

Net weight of export items at Sl No.1 to 3 may be specified as 453500 Kgs., 295000 Kgs
& 352400 Kgs respectively. 1. Quantity of import items at SI No. 1 to 7, 30, 35, 36, 42 to 50, 76, 81, 82, 88 to 95, 128, 133 & 134 may be allowed as 1.02 Mtr/Mtr. content in the respective export items. 2. Quantity of import items at Sl.No. 8 to 29, 31 to 34, 39 to 41, 51 to 75, 77 to 80, 85 to 87, 96 to 132 & 137 to 139 may be allowed on net to net basis with accountability clause in the respective export items. 3. Quantity of import items at SI No. 37, 83 &135 may be allowed as 1.01 Mtr/Mtr. content in the respective export items. 4. Quantity of import items at SI No. 38, 84 & 136 may be allowed as 1.02 Mtr/Mtr. content in the respective export items. 5.

ay be allowed as 1.01 Mtr/Mtr. content in the respective export items. 4. Quantity of import items at SI No. 38, 84 & 136 may be allowed as 1.02 Mtr/Mtr. content in the respective export items. 5.

Case No. 164 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003275AM26 RA File Number 34AX04000517 AM26 Licence No and Date 3411006972/17/09/2025 Separate quantities of each type of fastener viz, Flat Washers, Female Washers, Male Washers, Hex Bolts, Allen Bolts, Threaded Studs, Slotted Nuts, Cover Nuts etc. 1. 2. 3. 4. UDIN00566753AM26

106 5. The above information may be furnished separately for each type of fastener. 6.

Case No. 165 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name GHATGE PATIL INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003431AM26 RA File Number 03AX04003265 AM26 Licence No and Date 0311047651/26/09/2025

furnished. 1. 2. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. 5.

Case No. 166 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date UDIN00566753AM26

d by documentary evidence/drawings etc. 4. 5.

Case No. 166 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date UDIN00566753AM26

107 HQ File Number HQRNORM APPLY 00003443AM26 RA File Number 05AX04002263 AM26 Licence No and Date 0511035371/26/09/2025 comments of DPIIT dated 22.12.2025, as under:

Net weight of export item at SI No.1 may be specified as 221MTs containing 108.78MTs of import item, Stainless Steel Plates. 1. Import item at SI.No.1 may be of relevant grade and thickness as contained/utiIized in the export item and its quantity may be allowed as applied for i.e.112.58MTs as1.035 Kgs./Kg. content in the export item as claimed by the firm. 2.

Case No. 167 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name FABEX STEEL STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003489AM26 RA File Number 09AX04000664 AM26 Licence No and Date 0911010576/01/10/2025 comments of Consultant (SKB) dated 08.01.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEMS OF IMPORT WASTAGE TO BE ALLOWED HOT ROLLED STEEL PLATES 5 X 2000 X 6000 MM, AS PER S355JR GRADE. 3% ON THE NET WEIGHT OF 5MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 6 X 2000 X 6000 MM, AS PER S355JR GRADE. OF 6 MM STEEL PLATE IN THE EXPORT PRODUCT. 1 PRE-FABRICATED STEEL STRUCTURE

95.24 MTS UDIN00566753AM26

N THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 6 X 2000 X 6000 MM, AS PER S355JR GRADE. OF 6 MM STEEL PLATE IN THE EXPORT PRODUCT. 1 PRE-FABRICATED STEEL STRUCTURE

95.24 MTS UDIN00566753AM26

108 HOT ROLLED STEEL PLATES 8 X 2000 X 6000 MM, AS PER S355JR GRADE OF 8 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 10 X 2000 X 6000 MM, AS PER S355JR GRADE OF 10 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 12 X 2000 X 6000 MM, AS PER S355JR GRADE OF 12 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 16 X 2000 X 6000 MM, AS PER S355JR GRADE OF 16 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 20 X 2000 X 6000 MM, AS PER S355JR GRADE OF 20 MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 25 X 2000 X 6000 MM, AS PER S355JR GRADE OF 25MM STEEL PLATE IN THE EXPORT PRODUCT. HOT ROLLED STEEL PLATES 30 X 2000 X 6000 MM, AS PER S355JR GRADE OF 30 MM STEEL PLATE IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STEEL PLATES SHOULD MATCH THE GRADE OF STEEL PLATES OF THE EXPORT PRODUCT.

Case No. 168 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name JK MAINI GLOBAL AEROSPACE LIMITED Meeting Number UDIN00566753AM26

TCH THE GRADE OF STEEL PLATES OF THE EXPORT PRODUCT.

Case No. 168 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name JK MAINI GLOBAL AEROSPACE LIMITED Meeting Number UDIN00566753AM26

109 and Date HQ File Number HQRNORM APPLY 00003558AM26 RA File Number 07AX04001217 AM26 Licence No and Date 0711015812/06/10/2025

Submit colored drawings of the export item along with the complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. i. Detailed process of manufacturing. ii. How could the quantity of the export items in numbers be in points? Explain iii. Submit a process flow chart and wastage at each stage of operation. iv. Mill Test certificate of each grade of imported raw material. v. Application and uses of each item to be exported. vi.

Case No. 169 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003559AM26 RA File Number 07AX04001216 AM26 Licence No and Date 0711015813/06/10/2025

Submit colored drawings of the export item along with the complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. i. ii. iii. iv. v. UDIN00566753AM26

complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. i. ii. iii. iv. v. UDIN00566753AM26

110 Case stands deferred

Case No. 170 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003560AM26 RA File Number 07AX04001153 AM26 Licence No and Date 0711015814/06/10/2025

Submit colored drawings of the export item along with the complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. 1. 2. 3. 4. 5.

Case No. 171 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003561AM26 RA File Number 07AX04001152 AM26 Licence No and Date 0711015816/06/10/2025

weight thereof. 1. UDIN00566753AM26

111 2. 3. How could the quantity of the export items in numbers be in points? Explain 4. 5. 6.

Case No. 172 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003622AM26 RA File Number 05AX04002343 AM26 Licence No and Date 0511035611/09/10/2025

Case No. 173 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003635AM26 RA File Number 07AX04001204 AM26 Licence No and Date 0711015849/09/10/2025

weight thereof. 1. 2. 3. 4. 5.

UDIN00566753AM26

eeting Number and Date HQ File Number HQRNORM APPLY 00003635AM26 RA File Number 07AX04001204 AM26 Licence No and Date 0711015849/09/10/2025

weight thereof. 1. 2. 3. 4. 5.

UDIN00566753AM26

112

Case No. 174 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003636AM26 RA File Number 07AX04001205 AM26 Licence No and Date 0711015850/09/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 175 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003769AM26 RA File Number 05AX04002498 AM26 Licence No and Date 0511035795/15/10/2025

1. Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process. UDIN00566753AM26

113

2. Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.

3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included.

nd outputs involved in manufacturing the export product.

3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly.

4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included.

5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product.

6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product.

7. Raw Material Specification and Calculation: The process should begin with the specification of the export product.

eristics of the materials that will be imported for use in the export product.

7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings.

8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets.

9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same UDIN00566753AM26

114 export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 176 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003772AM26 RA File Number 05AX04002510 AM26 Licence No and Date 0511035798/15/10/2025

UDIN00566753AM26

tus Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003772AM26 RA File Number 05AX04002510 AM26 Licence No and Date 0511035798/15/10/2025

UDIN00566753AM26

115

Case No. 177 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003798AM26 RA File Number 24AX04000292 AM26 Licence No and Date 2411004970/17/10/2025 UDIN00566753AM26

116

Quantity of export items in Nos. in addition to their weights. 6.

Case No. 178 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003882AM26 RA File Number 07AX04001305 AM26 Licence No and Date 0711015968/22/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 179 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred UDIN00566753AM26

117 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003883AM26 RA File Number 07AX04001312 AM26 Licence No and Date 0711015969/22/10/2025

weight thereof. 1. The quantity of export item No. 1 is 10000 MTR. However, the import quantity is 400 MTR. How is it possible to manufacture 10000 MTR in 400 MTR? Explain with complete justification. In contrast, the wastage is 3% as per Appendix 4E. 2. 3. How could the quantity of the export items in numbers be in points? Explain 4. 5. 6. 7.

in 400 MTR? Explain with complete justification. In contrast, the wastage is 3% as per Appendix 4E. 2. 3. How could the quantity of the export items in numbers be in points? Explain 4. 5. 6. 7.

Case No. 180 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003884AM26 RA File Number 07AX04001303 AM26 Licence No and Date 0711015971/22/10/2025

weight thereof. 1. UDIN00566753AM26

118 2. How could the quantity of the export items in numbers be in points? Explain 3. 4. 5. 6.

Case No. 181 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003885AM26 RA File Number 07AX04001298 AM26 Licence No and Date 0711015972/22/10/2025

weight thereof. 1. 2. How could the quantity of the export items in numbers be in points? Explain 3. 4. 5. 6.

Case No. 182 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003934AM26 RA File Number 07AX04001350 AM26 Licence No and Date 0711016004/27/10/2025 UDIN00566753AM26

119

weight thereof. 1. 2. 3. 4. 5.

Case No. 183 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003935AM26 RA File Number 07AX04001349 AM26 Licence No and Date 0711016005/27/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 184 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date UDIN00566753AM26

cence No and Date 0711016005/27/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 184 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date UDIN00566753AM26

120 HQ File Number HQRNORM APPLY 00003936AM26 RA File Number 07AX04001347 AM26 Licence No and Date 0711016006/27/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 185 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003937AM26 RA File Number 07AX04001326 AM26 Licence No and Date 0711016008/27/10/2025

Submit colored drawings of each export item along with the complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. 1. 2. 3. 4. 5.

UDIN00566753AM26

121 Case No. 186 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003945AM26 RA File Number 07AX04001351 AM26 Licence No and Date 0711016017/28/10/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 187 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004060AM26 RA File Number 24AX04000325 AM26 Licence No and Date 2411005017/04/11/2025

UDIN00566753AM26

TECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004060AM26 RA File Number 24AX04000325 AM26 Licence No and Date 2411005017/04/11/2025

UDIN00566753AM26

122 Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. 5. Quantity of export items in Nos. in addition to their weights. 6.

Case No. 188 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004061AM26 RA File Number 07AX04001423 AM26 Licence No and Date 0711016096/04/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 189 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004062AM26 RA File Number 07AX04001422 AM26 Licence No and Date 0711016097/04/11/2025 UDIN00566753AM26

123

weight thereof. 1. 2. 3. 4. 5.

Case No. 190 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004063AM26 RA File Number 07AX04001419 AM26 Licence No and Date 0711016098/04/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 191 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number UDIN00566753AM26

AM26 Licence No and Date 0711016098/04/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 191 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number UDIN00566753AM26

124 and Date HQ File Number HQRNORM APPLY 00004109AM26 RA File Number 07AX04001417 AM26 Licence No and Date 0711016117/06/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 192 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004115AM26 RA File Number 07AX04001421 AM26 Licence No and Date 0711016139/06/11/2025

weight thereof. 1. 2. 3. 4. 5.

UDIN00566753AM26

125

Case No. 193 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004203AM26 RA File Number 07AX04001466 AM26 Licence No and Date 0711016160/11/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 194 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004204AM26 RA File Number 07AX04001418 AM26 Licence No and Date 0711016166/11/11/2025

weight thereof. 1. 2. 3. UDIN00566753AM26

rty Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004204AM26 RA File Number 07AX04001418 AM26 Licence No and Date 0711016166/11/11/2025

weight thereof. 1. 2. 3. UDIN00566753AM26

126 4. 5.

Case No. 195 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PRIJAI HEAT EXCHANGERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004210AM26 RA File Number 03AX04003863 AM26 Licence No and Date 0311048907/12/11/2025

Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. 5.

Case No. 196 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004261AM26 RA File Number 05AX04002823 AM26 Licence No and Date 0511036325/14/11/2025 UDIN00566753AM26

127

UDIN00566753AM26

128

Case stands deferred

Case No. 197 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004356AM26 RA File Number 05AX04002949 AM26 Licence No and Date 0511036421/19/11/2025

UDIN00566753AM26

Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004356AM26 RA File Number 05AX04002949 AM26 Licence No and Date 0511036421/19/11/2025

UDIN00566753AM26

129

Case No. 198 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004359AM26 RA File Number 07AX04001518 AM26 Licence No and Date 0711016234/19/11/2025

weight thereof. 1. 2. UDIN00566753AM26

130 3. 4. 5.

Case No. 199 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004360AM26 RA File Number 07AX04001513 AM26 Licence No and Date 0711016235/19/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 200 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004361AM26 RA File Number 07AX04001494 AM26 Licence No and Date 0711016236/19/11/2025 UDIN00566753AM26

131

weight thereof. 1. 2. 3. 4. 5.

Case No. 201 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004362AM26 RA File Number 07AX04001490 AM26 Licence No and Date 0711016237/19/11/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 202 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004395AM26 RA File Number 05AX04002993 AM26 UDIN00566753AM26

132 Licence No and Date 0511036461/21/11/2025

UDIN00566753AM26

Meeting Number and Date HQ File Number HQRNORM APPLY 00004395AM26 RA File Number 05AX04002993 AM26 UDIN00566753AM26

132 Licence No and Date 0511036461/21/11/2025

UDIN00566753AM26

133

Case No. 203 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004396AM26 RA File Number 05AX04002995 AM26 Licence No and Date 0511036463/21/11/2025

UDIN00566753AM26

134

Case No. 204 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004407AM26 RA File Number 07AX04001488 AM26 Licence No and Date 0711016258/21/11/2025

weight thereof. 1. UDIN00566753AM26

135 2. 3. 4. 5.

Case No. 205 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name ICEM ENGINEERING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004477AM26 RA File Number 03AX04004197 AM26 Licence No and Date 0311049296/26/11/2025 comments of DPIIT dated 26.12.2025, as under: Import item at Sl.No.1 (H.R. Non Alloy Steel Plates ) shall be of relevant grade and thickness as contained/utilized in the export item at SI. No. 1 and its quantity may be allowed as 460.2 MT as 1.18 Kgs/Kg content in the export item at SI.No.1. 1. Import item at Sl. No. 2 (Offcuting- By Product) may not be allowed for import and accordingly it may be omitted.
2. Import item at Sl.No.3 (H.R. Non Alloy Steel Plates ) shall be of relevant grade and thickness as contained/utilized in the export item at SI. No.

r import and accordingly it may be omitted.
2. Import item at Sl.No.3 (H.R. Non Alloy Steel Plates ) shall be of relevant grade and thickness as contained/utilized in the export item at SI. No. 3 and its quantity may be allowed as 460.2 MT as 1.18 Kgs/Kg content in the export item at SI.No.3. 3. Import item at Sl. No. 4 (Offcuting- By Product)) may not be allowed for import and accordingly it may be omitted.
4. Import item at Sl.No.5 (H.R. Non Alloy Steel Plates ) shall be of relevant grade and thickness as contained/utilized in the export item at SI. No. 5 and its quantity may be allowed as 49.5 MT as 1.10 Kgs/Kg content in the export item at SI.No.5.
5.

Case No. 206 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number UDIN00566753AM26

136 and Date HQ File Number HQRNORM APPLY 00004667AM26 RA File Number 05AX04003259 AM26 Licence No and Date 0511036835/08/12/2025

UDIN00566753AM26

137

Case No. 207 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004668AM26 RA File Number 05AX04003258 AM26 Licence No and Date 0511036836/08/12/2025

UDIN00566753AM26

Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004668AM26 RA File Number 05AX04003258 AM26 Licence No and Date 0511036836/08/12/2025

UDIN00566753AM26

138

Case No. 208 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004670AM26 RA File Number 07AX04001632 AM26 Licence No and Date 0711016405/08/12/2025

weight thereof. 1. 2. 3. 4. 5.

Case No. 209 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date UDIN00566753AM26

139 HQ File Number HQRNORM APPLY 00004842AM26 RA File Number 08AX04001556 AM26 Licence No and Date 0811017046/16/12/2025

Case No. 210 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name PERMANENT MAGNETS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004854AM26 RA File Number 03AX04004734 AM26 Licence No and Date 0311049872/17/12/2025

UDIN00566753AM26

NENT MAGNETS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004854AM26 RA File Number 03AX04004734 AM26 Licence No and Date 0311049872/17/12/2025

UDIN00566753AM26

140 5.

Case No. 211 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004876AM26 RA File Number 03AX04004787 AM26 Licence No and Date 0311049909/18/12/2025

Calculations/basis for the quantities of import items. 6.

Case No. 212 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004895AM26 UDIN00566753AM26

141 RA File Number 34AX04000774 AM26 Licence No and Date 3411007321/18/12/2025

Separate quantities of each type of fasteners in nos. and weight. 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. The above information may be furnished separately for each type of fastener. 6.

Case No. 213 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004910AM26 RA File Number 03AX04004802 AM26 Licence No and Date 0311049940/19/12/2025 comments of DPIIT dated 01.01.2026, as under:

Quantity of import items at SI No. 1 to 47 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. 1.

UDIN00566753AM26

T dated 01.01.2026, as under:

Quantity of import items at SI No. 1 to 47 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. 1.

UDIN00566753AM26

142

Case No. 214 / NC/1/MEET/Jan/202526/15 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004963AM26 RA File Number 07AX04001656 AM26 Licence No and Date 0711016540/22/12/2025

Submit colored drawings of each export item along with the complete dimensions of the initial size of the imported raw material, weight required and also final dimensions of the finished product and weight thereof. 1. 2. 3. 4. 5.

Case No. 215 / NC/1/MEET/Jan/202526/15 Case Status Case Approved Party Name HANNING MOTORS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005046AM26 RA File Number 34AX04000813 AM26 Licence No and Date 3411007354/29/12/2025 comments of DPIIT dated 05.01.2026, as under:

Quantity of import items at Sl. No. 1 to 6 may be allowed on net to net basis with accountability clause as per GN-4. 1. Quantity of import items at Sl. No. 7 &8 may be allowed as 1.05 Kg./Kg. content in the export item. 2. UDIN00566753AM26

143 Quantity of import item at Sl. No.9 may be allowed as 1.01 Kg./Kg. content in the export item. 3. Quantity of import item at Sl. No.10 may be allowed upto 2 % of FOB value of exports. 4.

UDIN00566753AM26