IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION) MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Nov/202526/13 DATED: 16/12/2025

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Nov/202526/13 dated 16/12/2025 of Norms Committee - I for the year 2025-26 was held on 16/12/2025 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Shri R.K. Jaiswal, DO MHI 2 Shri S. K. Jain, Consultant DPIIT 3 Shri V.C. Agarwal, Consultant (Tech-3) Technical Consultant, DGFT 4 Shri Shaish Kumar, Consultant (Tech-1) Technical Consultant, DGFT 5 Shri S.K. Bhatnagar, Consultant (SKB) Technical Consultant, DGFT

In Attendance:- S.No. Name and Designation Department UDIN00484460AM26 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director on 08-01-2026 11:50:58.

2 1 Shri Randheep Thakur, Jt.DGFT DGFT 2 Shri Ashwani Kumar Ojha, Dy. Dir DGFT

UDIN00484460AM26

3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name ABERDARE TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number HQRNORM APPLY 00002460AM26 RA File Number NA Licence No and Date NA

Norms Committee Decision:

The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

i) Details of export product in terms of structural design, calculations, and brief notes about export product as well as import inputs. ii) Justification of claimed Wastage over per unit requirement without wastage. iii) Quantity of import items required for manufacturing one unit of export product for each export item. (Share excel sheet). iv) Calculations on per unit requirement of Import item for manufacturing one unit of export product without wastage. (Share excel sheet) v) Wastage claimed in the manufacturing process and details of recoverable wastage. (Share Excel sheet) vi) Declaration regarding non-recoverable Wastage in manufacturing process vii) Certificate of Chartered Accountant/ Cost Accountant/Company Secretary (as per appendix 5 B) viii) Declaration as prescribed under Annexure ‘A’ to Trade Notice No. 1/06 dated 07.06.2005; Annexure to Trade Notice No. 4/AM06 dated 06.07.2005; Annexure ‘A’ to Trade Notice No. 12/AM05 dated 10.03.2005; Annexure ‘A’ to Trade Notice No. 03/AM11 dated 08.10.2010. ix) Declaration under Para 4.07 of HBP and Para 4.11 of FTP-2023 , Para 4.15 of HBP . x) Declaration showing that none of your import or export items falls under SCOMET List xi) Declaration as per policy circular no. 9 dated 30.06.2003

Case stands deferred.

Case No. 2 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

items falls under SCOMET List xi) Declaration as per policy circular no. 9 dated 30.06.2003

Case stands deferred.

Case No. 2 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

4 Party Name DEEPSEA TECHNOLOGIES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002935AM26 RA File Number NA Licence No and Date NA Specific list of export item(s) with their quantities and net weights 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. The above information may be furnished export product wise. 6.

ls, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. The above information may be furnished export product wise. 6. Case stands deferred

Case No. 3 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name WEST COAST PAPER MILLS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003677AM25 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that a deficiency letter issued on 02.04.2025 followed by several reminders was issued to the applicant for providing certain information/documents.
However, no reply has yet been received. Hence, the committee decided to reject the case with direction to the applicant to pay Custom duty & applicable interest for EODC.

Case stands rejected. UDIN00484460AM26

Case No. 4 / NC/1/MEET/Nov/202526/13 Case Status Case Withdrawn Party Name CRI LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00004545AM25 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that this case was withdrawn from the agenda in NC-VI meeting dated 19/06/2025 on the ground that the firm had submitted request for withdrawal of the application. However, the same has been transferred by NC-VI to NC-I on portal without mentioning any reason.

ated 19/06/2025 on the ground that the firm had submitted request for withdrawal of the application. However, the same has been transferred by NC-VI to NC-I on portal without mentioning any reason. Hence, the committee decided to transfer this case to NC-VI, showing the status of the case as withdrawn.

Case No. 5 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004745AM25 RA File Number NA Licence No and Date NA The committee considered the case as per agenda and noted that this case pertains to AA No. 0711012758 for which ad-hoc norms have already been fixed in NC-1 meeting dated 09/01/2025. In this case, the firm has not filed any review application for amendment in ad-hoc norms. Rather, it has filed application for amendment in AA, for which the concerned RA is empowered. Hence, the committee decided to reject the case.

Case No. 6 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003535AM26 RA File Number NA Licence No and 0410083530/11/08/2006 UDIN00484460AM26

Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003535AM26 RA File Number NA Licence No and 0410083530/11/08/2006 UDIN00484460AM26

6 Date Case deferred for the comments of TE.

Case No. 7 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003409AM26 RA File Number NA Licence No and Date 0410101778/22/01/2009

Case No. 8 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BOSCH LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00009055AM24 RA File Number 072404000417 AM11 Licence No and Date 0710076813/19/01/2011 The Committee considered the case as per agenda and noted that the documents pertaining to this AA has been sought from RA, Bangalore on 15.10.2024 followed by reminders on 24.01.2025 & 28.02.2025.
However, reply from RA, Bangalore is still awaited. Hence, the Committee decided to send a reminder to the concerned RA to furnish the requisite documents within 15 days.

Case No. 9 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name STERLITE ELECTRIC LIMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number 018005000430AM17 RA File Number 039504000318 AM17 Licence No and Date 0310808015/23/09/2016 UDIN00484460AM26

IMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number 018005000430AM17 RA File Number 039504000318 AM17 Licence No and Date 0310808015/23/09/2016 UDIN00484460AM26

7 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Meity dated 10.11.2025, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM SINGLE MODE OPTICAL FIBER 3967.72 KME Filling Jelly OPGW 1076.21 KGS Aluminum Ingot 26298.05 KGS High Carbon Steel wire 44812.66 KGS Wire drawing Powder for lubricants 1233.79 KGS 1. Optical Power Ground Wire (OPGW 24F Cable (G652- D)DesignPBT 12.5MM) 160.00 KME

Stainless Steel Tape 161.60 KGS

RA concerned may take suitable consequential action accordingly.

Case No. 10 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005363AM25 RA File Number 092404000139 AM19 Licence No and Date 0910066427/06/07/2018

UDIN00484460AM26

d Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005363AM25 RA File Number 092404000139 AM19 Licence No and Date 0910066427/06/07/2018

UDIN00484460AM26

8 Case No. 11 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006192AM25 RA File Number 092404000138 AM20 Licence No and Date 0910067697/26/06/2019

Case No. 12 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006805AM25 RA File Number 092404000336 AM20 Licence No and Date 0910068046/27/09/2019

Case No. 13 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002504AM23 RA File Number 052404000398 AM20 Licence No and Date 0510413428/23/01/2020

Case No. 14 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006193AM25 RA File Number 092404000290 AM21 UDIN00484460AM26

/2020

Case No. 14 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006193AM25 RA File Number 092404000290 AM21 UDIN00484460AM26

9 Licence No and Date 0910069158/07/09/2020

Case No. 15 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006803AM25 RA File Number 092404000347 AM21 Licence No and Date 0910069252/23/09/2020

Case No. 16 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006802AM25 RA File Number 092404000439 AM21 Licence No and Date 0910069430/03/11/2020

Case No. 17 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006798AM25 RA File Number 092404000435 AM21 Licence No and Date 0911000157/08/01/2021

UDIN00484460AM26

10 Case No. 18 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006799AM25 RA File Number 092404000438 AM21 Licence No and Date 0911000158/08/01/2021

Case No. 19 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006800AM25 RA File Number 092404000436 AM21 Licence No and Date 0911000165/08/01/2021

Case No. 20 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006801AM25 RA File Number 092404000434 AM21 Licence No and Date 0911000156/08/01/2021

Case No.

202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006801AM25 RA File Number 092404000434 AM21 Licence No and Date 0911000156/08/01/2021

Case No. 21 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005417AM25 RA File Number 09AA04003682 AM21 UDIN00484460AM26

11 Licence No and Date 0911000224/21/01/2021

Case No. 22 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005413AM25 RA File Number 09AA04005664 AM21 Licence No and Date 0911000495/11/03/2021

Case No. 23 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005416AM25 RA File Number 09AA04005657 AM21 Licence No and Date 0911000496/11/03/2021

Case No. 24 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005415AM25 RA File Number 09AA04006679 AM21 Licence No and Date 0911000623/27/03/2021

UDIN00484460AM26

Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005415AM25 RA File Number 09AA04006679 AM21 Licence No and Date 0911000623/27/03/2021

UDIN00484460AM26

12 Case No. 25 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005414AM25 RA File Number 09AA04006690 AM21 Licence No and Date 0911000625/29/03/2021

Case No. 26 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005406AM25 RA File Number 09AA04001710 AM22 Licence No and Date 0911000733/26/04/2021

Case No. 27 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005407AM25 RA File Number 09AA04001484 AM22 Licence No and Date 0911000727/26/04/2021

Case No. 28 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005408AM25 RA File Number 09AA04001483 AM22 UDIN00484460AM26

/2021

Case No. 28 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005408AM25 RA File Number 09AA04001483 AM22 UDIN00484460AM26

13 Licence No and Date 0911000726/26/04/2021

Case No. 29 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005409AM25 RA File Number 09AA04001485 AM22 Licence No and Date 0911000725/26/04/2021

Case No. 30 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005410AM25 RA File Number 09AA04001486 AM22 Licence No and Date 0911000723/26/04/2021

Case No. 31 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005411AM25 RA File Number 09AA04001468 AM22 Licence No and Date 0911000721/26/04/2021

UDIN00484460AM26

14 Case No. 32 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005412AM25 RA File Number 09AA04000955 AM22 Licence No and Date 0911000722/26/04/2021

Case No. 33 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005405AM25 RA File Number 09AA04002764 AM22 Licence No and Date 0911000844/17/05/2021

Case No. 34 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005403AM25 RA File Number 09AA04003172 AM22 Licence No and Date 0911000954/27/05/2021

Case No.

202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005403AM25 RA File Number 09AA04003172 AM22 Licence No and Date 0911000954/27/05/2021

Case No. 35 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005404AM25 RA File Number 09AA04003173 AM22 UDIN00484460AM26

15 Licence No and Date 0911000927/27/05/2021

Case No. 36 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005402AM25 RA File Number 09AA04003223 AM22 Licence No and Date 0911000958/28/05/2021

Case No. 37 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00121082AM22 RA File Number 09AA04004973 AM22 Licence No and Date 0911001075/22/06/2021

Case No. 38 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005400AM25 RA File Number 09AA04006761 AM22 Licence No and Date 0911001135/05/07/2021

UDIN00484460AM26

Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005400AM25 RA File Number 09AA04006761 AM22 Licence No and Date 0911001135/05/07/2021

UDIN00484460AM26

16 Case No. 39 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005401AM25 RA File Number 09AA04006772 AM22 Licence No and Date 0911001134/05/07/2021

Case No. 40 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006411AM25 RA File Number 05AA04057692 AM22 Licence No and Date 0511003764/22/07/2021

Case No. 41 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name AUTOTECH INDUSTRIES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006907AM25 RA File Number 04AA04016167 AM22 Licence No and Date 0411001198/28/07/2021 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025

UDIN00484460AM26

cence No and Date 0411001198/28/07/2021 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025

UDIN00484460AM26

17 Case No. 42 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00003284AM26 RA File Number 05AA04075816 AM22 Licence No and Date 0511004464/03/09/2021 comments of DPIIT dated 29.09.2025, as under:

Net weight of export item may be specified as 113.12 MT. 1. Import items at Sl. No. 1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 115,959 Kgs. as 1.0385 Kgs./Kg. content in the export item as claimed by the firm. 2. Import items at Sl. No. 2 to 5 may be omitted as not imported by the firm 3. Quantity of import item at Sl.No.6 may be allowed as 1293 Kgs. on net to net basis as claimed by the firm. 4.

Case No. 43 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name STERLITE ELECTRIC LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003088AM25 RA File Number 03AA04028824 AM22 Licence No and Date 0311007494/05/10/2021 comments of Meity dated 10.11.2025, as under:

SL. No. ITEM OF EXPORT QUANTITY Export UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM Optical Power Ground Wire -
SINGLE MODE

185000.00 Meter

91,75,348.80 MTR UDIN00484460AM26

EXPORT QUANTITY Export UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM Optical Power Ground Wire -
SINGLE MODE

185000.00 Meter

91,75,348.80 MTR UDIN00484460AM26

18 OPTICAL FIBER 185000.00 Filling Jelly OPGW

1,949.01 KGS 185000.00 Aluminum Ingot

55,519.31 KGS 185000.00 High Carbon Steel wire

1,00,298.14 KGS 185000.00 Wire drawing Powder for lubricants

990.68 KGS 17.5 mm OPGW 48F (24F G652 D

24F G655) 185000.00 SS Tape

5,979.20 KGS 50000.00 Stainless Steel Tube with Optical Fiber G652D

51,005.00 MTR 50000.00 Aluminum Ingot

15,019.50 KGS 50000.00 High Carbon Steel wire

11,686.20 KGS

Optical Power Ground Wire - OPGW 24F 15.4 MM 50000.00 Meter Wire drawing Powder for lubricants

128.52 KGS 110000.00 SINGLE MODE OPTICAL FIBER

54,55,612.80 MTR Filling Jelly

Optical Power Ground Wire - Design C-12.85 mm 48F OPGW cable 110000.00 Meter KGS UDIN00484460AM26

IBER

54,55,612.80 MTR Filling Jelly

Optical Power Ground Wire - Design C-12.85 mm 48F OPGW cable 110000.00 Meter KGS UDIN00484460AM26

19 OPGW 880.30 110000.00 Aluminum Ingot

708.91 KGS 110000.00 HI-CARBON STEEL WIRE

52,057.93 KGS 110000.00 Wire drawing Powder for lubricants

424.12 KGS 110000.00 SS Tape

3,555.20 KGS 70000.00 SINGLE MODE OPTICAL FIBER

34,71,753.60 MTR 70000.00 Filling Jelly OPGW

536.08 KGS 70000.00 Aluminum Ingot

21,923.37 KGS 70000.00 HI-CARBON STEEL WIRE

26,934.34 KGS 70000.00 Wire drawing Powder for lubricants

432.68 KGS

Optical Power Ground Wire (
CABLE 48 F.O. OPGW 16 MM, G655 ) 70000.00 Meter SS Tape

2,262.40 KGS 15000.00 SINGLE MODE OPTICAL FIBER

7,43,947.20 MTR Optical Power Ground Wire (
Design E-18.2 mm OPGW 48F

Meter UDIN00484460AM26

2,262.40 KGS 15000.00 SINGLE MODE OPTICAL FIBER

7,43,947.20 MTR Optical Power Ground Wire (
Design E-18.2 mm OPGW 48F

Meter UDIN00484460AM26

20 15000.00 Filling Jelly OPGW

161.98 KGS 15000.00 Aluminum Ingot

4,364.94 KGS 15000.00 HI-CARBON STEEL WIRE

12,495.77 KGS 15000.00 Wire drawing Powder for lubricants

88.43 KGS Cable ) 15000.00 SS Tape

484.80 KGS 80000.00 SINGLE MODE OPTICAL FIBER

39,67,718.40 MTR 80000.00 Filling Jelly OPGW

640.22 KGS 80000.00 Aluminum Ingot

8,137.15 KGS 80000.00 HI-CARBON STEEL WIRE

33,785.70 KGS 80000.00 Wire drawing Powder for lubricants

385.97 KGS

Optical Power Ground Wire (
Design C- 12.0mm OPGW 48F Cable ) 80000.00 Meter SS Tape

2,424.00 KGS Optical Power Ground Wire (
Design C - 12.00 SINGLE MODE OPTICAL

128000.00 Meter

31,74,174.72 MTR UDIN00484460AM26

SS Tape

2,424.00 KGS Optical Power Ground Wire (
Design C - 12.00 SINGLE MODE OPTICAL

128000.00 Meter

31,74,174.72 MTR UDIN00484460AM26

21 FIBER 128000.00 Filling Jelly OPGW

1,024.35 KGS 128000.00 Aluminum Ingot

13,019.44 KGS 128000.00 HI-CARBON STEEL WIRE

54,057.11 KGS 128000.00 Wire drawing Powder for lubricants

617.55 KGS mm OPGW 24 F Cable ) 128000.00 SS Tape

3,878.40 KGS Optical Power Ground Wire (
48 Core OPGW - G652 ) 580000.00 SINGLE MODE OPTICAL FIBER

2,87,65,958.40 MTR

580000.00 Filling Jelly OPGW

5,499.37 KGS

580000.00 Aluminum Ingot

1,58,596.13 KGS

580000.00 HI-CARBON STEEL WIRE

1,44,396.34 KGS

580000.00 Wire drawing Powder for lubricants

2,484.72 KGS

580000.00 Meter SS Tape

17,574.00 KGS UDIN00484460AM26

1,44,396.34 KGS

580000.00 Wire drawing Powder for lubricants

2,484.72 KGS

580000.00 Meter SS Tape

17,574.00 KGS UDIN00484460AM26

Case No. 44 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005399AM25 RA File Number 09AA04018564 AM22 Licence No and Date 0911002005/06/12/2021

Case No. 45 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005398AM25 RA File Number 09AX04000033 AM22 Licence No and Date 0911002081/15/12/2021

Case No. 46 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BAINITE MACHINES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00302281AM22 RA File Number 03AX04000178 AM22 Licence No and Date 0311009923/30/12/2021 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025 UDIN00484460AM26

RA File Number 03AX04000178 AM22 Licence No and Date 0311009923/30/12/2021 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025 UDIN00484460AM26

Case No. 47 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006412AM25 RA File Number 05AX04001153 AM22 Licence No and Date 0511010598/02/03/2022

Case No. 48 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005397AM25 RA File Number 09AX04000240 AM22 Licence No and Date 0911002604/03/03/2022

Case No. 49 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006397AM25 RA File Number 05AX04001180 AM22 Licence No and Date 0511010666/04/03/2022 The committee considered the case as per agenda and noted that a deficiency letter issued on 09.05.25 UDIN00484460AM26

25 RA File Number 05AX04001180 AM22 Licence No and Date 0511010666/04/03/2022 The committee considered the case as per agenda and noted that a deficiency letter issued on 09.05.25 UDIN00484460AM26

Case No. 50 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005396AM25 RA File Number 09AX04000359 AM22 Licence No and Date 0911002748/24/03/2022

Case No. 51 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001507AM26 RA File Number NA Licence No and Date 0311015588/16/06/2022 The Committee considered the case as per agenda. It was observed by the Committee that wastage recommended by Meity in respect of import item is 3.5%. The view of the Committee was that the same should be 2% and as such, it was decided by the Committee to seek clarification from Meity in this matter.

Case No. 52 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001506AM26 UDIN00484460AM26

ter.

Case No. 52 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001506AM26 UDIN00484460AM26

25 RA File Number NA Licence No and Date 0311015693/21/06/2022 The Committee considered the case as per agenda. It was observed by the Committee that wastage recommended by Meity in respect of import items is 3.5%. The view of the Committee was that the same should be 2% and as such, it was decided by the Committee to seek clarification from Meity in this matter.

Case No. 53 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name DEWAN & SONS Meeting Number and Date HQ File Number HQRNORM REVIW00005951AM25 RA File Number 05AX04002025 AM23 Licence No and Date 0511015324/14/10/2022 The committee considered the case as per agenda and noted that the firm has wrongly uploaded the application of Doowon Climate Control India Pvt. Ltd for review of the earlier decision of NC-1 for rejection of its case. Hence, the committee decided to reject the case with direction to the applicant to pay Custom duty & applicable interest for EODC.

Case No. 54 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC TITAN METAL FABRICATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006421AM25 RA File Number 05AX04002803 AM23 Licence No and Date 0511016494/22/12/2022 The committee considered the case as per agenda and noted that a deficiency letter issued on 09.05.2025 UDIN00484460AM26

RA File Number 05AX04002803 AM23 Licence No and Date 0511016494/22/12/2022 The committee considered the case as per agenda and noted that a deficiency letter issued on 09.05.2025 UDIN00484460AM26

Case No. 55 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC TITAN METAL FABRICATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006422AM25 RA File Number 05AX04002815 AM23 Licence No and Date 0511016504/22/12/2022

Case No. 56 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC TITAN METAL FABRICATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006423AM25 RA File Number 05AX04003079 AM23 Licence No and Date 0511016938/19/01/2023

Case No. 57 / NC/1/MEET/Nov/202526/13 Case Status Case Approved UDIN00484460AM26

27 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005392AM25 RA File Number 09AX04001094 AM23 Licence No and Date 0911004606/07/03/2023 comments of MHI dated 25.11.2025, as under:

Export Product: TURBINE PARTS (Made from Stainless Steel Bar) Import Item: Stainless Steel Bars Export Product Import Item S. No. Description Qty.

/2023 comments of MHI dated 25.11.2025, as under:

Export Product: TURBINE PARTS (Made from Stainless Steel Bar) Import Item: Stainless Steel Bars Export Product Import Item S. No. Description Qty. in Nos. Net Wt. Description % wastage on net content basis to be allowed after recovery 1. TURBINE PARTS (Made from Stainless steel Bar, Grade: CB403- 60 MM) 28615 12876.75 Kg STAINLESS STEEL BARS GRADE: CB-403- 60 MM 330% 2. TURBINE PARTS (Made from Stainless steel Bar, Grade: CB403- 85 MM) 6414 6093.30 Kg STAINLESS STEEL BARS GRADE: CB-403- 85 MM 184.74% 3. TURBINE PARTS (Made from Stainless steel Bar, Grade: GTD- 450-100 MM RCS) 479 2850.05 Kg STAINLESS STEEL BARS GRADE: GTD-450

100MM RCS 173.19% 4. TURBINE PARTS (Made from Stainless steel Bar, Grade: GTD- 450-150 MM RCS) 1040 3380 Kg STAINLESS STEEL BARS GTD-450-150 MM RCS 179.76% UDIN00484460AM26

28 5. TURBINE PARTS (Made from Stainless steel Bar, Grade: GTD- 450-70 MM RCS) 10732 9229.52 Kg STAINLESS STEEL BARS GTD-450-70 MM RCS 291.62%

Case No. 58 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005393AM25 RA File Number 09AX04001093 AM23 Licence No and Date 0911004594/07/03/2023 comments of MHI dated 12.12.2025, as under:

Export products: Turbine parts

Import items: Steel castings for CARRIER RING - PT2 (C1/MW336611), Stator Location Ring (C1/MW33614), CT CASING INNER (C1/MW33012), SHROUD (C1 /MW33044), Retaining Ring (C1/MW33344), Stator Seal Ring (C1/RU33621A)

ings for CARRIER RING - PT2 (C1/MW336611), Stator Location Ring (C1/MW33614), CT CASING INNER (C1/MW33012), SHROUD (C1 /MW33044), Retaining Ring (C1/MW33344), Stator Seal Ring (C1/RU33621A)

S. No. Import item Description Export product Import Quantity (Nos.) Export Quantity (Nos.) Net output wt. Per piece (Kg) % wastage on net content basis to be allowed after recovery

1 CARRIER RING - PT2 (C1/MW336611) (Steel Casting) TURBINE PARTS 5 5 80.03 45.19%
UDIN00484460AM26

29 2 (C1/MW33614) (Steel Casting) TURBINE PARTS 6 6 91.1 97.92%
3 CT CASING INNER (C1/MW33012)
(Steel Casting) TURBINE PARTS 4 4 52.5 82.33%
4 SHROUD (C1 /MW33044) (Steel Casting) TURBINE PARTS 12 12 5.4 154.81%
5 (C1/MW33344) (Steel Casting) TURBINE PARTS 2 2 17.2 105.49%
6 (C1/RU33621A) (Steel Casting) TURBINE PARTS 2 2 2.52 402.62%

Case No. 59 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name ARMOR PLAST PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007001AM23 RA File Number 07AX04001890 AM23 Licence No and Date 0711006770/15/03/2023 comments of DPIIT dated 18.09.2025, as under:

Quantity of import items at Sl.No. 1 to 9 &11 may be allowed on net to net basis with accountability clause. 1. Quantity of import items at Sl.No. 10 &12 may be allowed on net to net basis as claimed by the firm. 2.

UDIN00484460AM26

&11 may be allowed on net to net basis with accountability clause. 1. Quantity of import items at Sl.No. 10 &12 may be allowed on net to net basis as claimed by the firm. 2.

UDIN00484460AM26

Case No. 60 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006400AM25 RA File Number 05AX04003503 AM23 Licence No and Date 0511018169/06/04/2023

Case No. 61 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005390AM25 RA File Number 09AX04001167 AM23 Licence No and Date 0911004852/20/04/2023

Case No. 62 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005387AM25 RA File Number 09AX04001168 AM23 Licence No and Date 0911004856/21/04/2023 UDIN00484460AM26

Case No. 63 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005388AM25 RA File Number 09AX04000004 AM24 Licence No and Date 0911004855/21/04/2023

Case No. 64 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005389AM25 RA File Number 09AX04001178 AM23 Licence No and Date 0911004854/21/04/2023

Case No. 65 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name JAYCEE AUTOFAB PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006263AM25 RA File Number 05AX04000196 AM24 Licence No and Date

v/202526/13 Case Status Case Rejected Party Name JAYCEE AUTOFAB PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006263AM25 RA File Number 05AX04000196 AM24 Licence No and Date 0511018558/27/04/2023 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025

UDIN00484460AM26

Case No. 66 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006401AM25 RA File Number 05AX04000241 AM24 Licence No and Date 0511018607/01/05/2023

Case No. 67 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006413AM25 RA File Number 05AX04000246 AM24 Licence No and Date 0511018608/01/05/2023 The Committee considered the case as per agenda and noted that the firm vide its mail dt.12.12.25 has informed that it has surrendered the AA unutilized to RA, Delhi. Hence, the Committee decided to close the case for ratification of ad-hoc norms showing it as “rejected”.

Case No. 68 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name POWERARM ENGINEERING PRIVATE LIMITED Meeting Number and Date UDIN00484460AM26

f ad-hoc norms showing it as “rejected”.

Case No. 68 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name POWERARM ENGINEERING PRIVATE LIMITED Meeting Number and Date UDIN00484460AM26

33 HQ File Number HQRNORM REVIW00004628AM25 RA File Number 04AX04000054 AM24 Licence No and Date 0411005326/04/05/2023 The committee considered the case as per agenda and noted that a deficiency letter issued on 22.04.2025

Case No. 69 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005384AM25 RA File Number 09AX04000274 AM24 Licence No and Date 0911005293/28/06/2023

Case No. 70 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005385AM25 RA File Number 09AX04000275 AM24 Licence No and Date 0911005291/28/06/2023

Case No. 71 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date UDIN00484460AM26

M25 RA File Number 09AX04000275 AM24 Licence No and Date 0911005291/28/06/2023

Case No. 71 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date UDIN00484460AM26

34 HQ File Number HQRNORM REVIW00005386AM25 RA File Number 09AX04000273 AM24 Licence No and Date 0911005290/28/06/2023

Case No. 72 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name STOVE KRAFT LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006693AM25 RA File Number 07AX04000241 AM24 Licence No and Date 0711008418/30/06/2023 The committee considered the case as per agenda and noted that a deficiency letter issued on 22.04.2025

Case No. 73 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005383AM25 RA File Number 09AX04000339 AM24 Licence No and Date 0911005384/13/07/2023

Case No. 74 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date UDIN00484460AM26

M25 RA File Number 09AX04000339 AM24 Licence No and Date 0911005384/13/07/2023

Case No. 74 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date UDIN00484460AM26

35 HQ File Number HQRNORM REVIW00005382AM25 RA File Number 09AX04000350 AM24 Licence No and Date 0911005433/18/07/2023

Case No. 75 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005381AM25 RA File Number 09AX04000422 AM24 Licence No and Date 0911005597/08/08/2023

Case No. 76 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006402AM25 RA File Number 05AX04001397 AM24 Licence No and Date 0511020553/23/08/2023

Case No. 77 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date UDIN00484460AM26

36 HQ File Number HQRNORM REVIW00006415AM25 RA File Number 05AX04001467 AM24 Licence No and Date 0511020579/24/08/2023

Case No. 78 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005380AM25 RA File Number 09AX04000449 AM24 Licence No and Date 0911005691/28/08/2023

Case No. 79 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006417AM25 RA File Number 05AX04001571 AM24 Licence No and Date 0511020786/05/09/2023

Case No. 80 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number

17AM25 RA File Number 05AX04001571 AM24 Licence No and Date 0511020786/05/09/2023

Case No. 80 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005379AM25 RA File Number 09AX04000521 AM24 Licence No and Date 0911005779/07/09/2023 UDIN00484460AM26

Case No. 81 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005377AM25 RA File Number 09AX04000562 AM24 Licence No and Date 0911005913/09/10/2023

Case No. 82 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005378AM25 RA File Number 09AX04000561 AM24 Licence No and Date 0911005912/09/10/2023

Case No. 83 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005376AM25 RA File Number 09AX04000612 AM24 Licence No and Date 0911005977/13/10/2023

Case No. 84 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name UDIN00484460AM26

er HQRNORM REVIW00005376AM25 RA File Number 09AX04000612 AM24 Licence No and Date 0911005977/13/10/2023

Case No. 84 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name UDIN00484460AM26

38 Meeting Number and Date HQ File Number HQRNORM REVIW00005373AM25 RA File Number 09AX04000639 AM24 Licence No and Date 0911006028/18/10/2023

Case No. 85 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005374AM25 RA File Number 09AX04000640 AM24 Licence No and Date 0911006026/18/10/2023

Case No. 86 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005375AM25 RA File Number 09AX04000638 AM24 Licence No and Date 0911006027/18/10/2023

Case No. 87 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005372AM25 RA File Number 09AX04000670 AM24 Licence No and Date 0911006079/25/10/2023 UDIN00484460AM26

13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005372AM25 RA File Number 09AX04000670 AM24 Licence No and Date 0911006079/25/10/2023 UDIN00484460AM26

Case No. 88 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005369AM25 RA File Number 09AX04000708 AM24 Licence No and Date 0911006157/07/11/2023

Case No. 89 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005370AM25 RA File Number 09AX04000707 AM24 Licence No and Date 0911006155/07/11/2023

Case No. 90 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005371AM25 RA File Number 09AX04000706 AM24 Licence No and Date 0911006154/07/11/2023

Case No. 91 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name DEWAN & SONS UDIN00484460AM26

VIW00005371AM25 RA File Number 09AX04000706 AM24 Licence No and Date 0911006154/07/11/2023

Case No. 91 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name DEWAN & SONS UDIN00484460AM26

40 Meeting Number and Date HQ File Number HQRNORM REVIW00005952AM25 RA File Number 05AX04002312 AM24 Licence No and Date 0511021907/07/11/2023 The committee considered the case as per agenda and noted that the firm has wrongly uploaded the application of Doowon Climate Control India Pvt. Ltd for review of the earlier decision of NC-1 for rejection of its case. Hence, the committee decided to reject the case with direction to the applicant to pay Custom duty & applicable interest for EODC.

Case No. 92 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name DELUX BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004073AM25 RA File Number 03AX04003741 AM24 Licence No and Date 0311028766/17/11/2023

Case No. 93 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005368AM25 RA File Number 09AX04000770 AM24 Licence No and Date 0911006274/22/11/2023

Case No. 94 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ENPRO INDUSTRIES PRIVATE LIMITED UDIN00484460AM26

ile Number 09AX04000770 AM24 Licence No and Date 0911006274/22/11/2023

Case No. 94 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ENPRO INDUSTRIES PRIVATE LIMITED UDIN00484460AM26

41 Meeting Number and Date HQ File Number HQRNORM APPLY 00007520AM24 RA File Number 31AX04000257 AM24 Licence No and Date 3111002925/21/12/2023 The committee considered the case as per agenda and noted that a deficiency letter issued on 22.04.2025

Case No. 95 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006418AM25 RA File Number 05AX04003202 AM24 Licence No and Date 0511023135/09/01/2024 The Committee considered the case as per agenda and noted that the firm vide its mail dt.12.12.25 has informed that it has surrendered the AA unutilized to RA, Delhi. Hence, the Committee decided to close the case for ratification of ad-hoc norms showing it as “rejected”.

Case No. 96 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005366AM25 RA File Number 09AX04000904 AM24 Licence No and Date 0911006553/11/01/2024 UDIN00484460AM26

13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005366AM25 RA File Number 09AX04000904 AM24 Licence No and Date 0911006553/11/01/2024 UDIN00484460AM26

42 comments of MHI dated 12.12.2025, as under:

Export Product Import item Description Qty. in Nos. Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery TURBINE PARTS (Made from Stainless steel round bar, Grade: CB403+ (B50A365B1)) 1380 5,796 STAINLES S STEEL ROUND BARS GRADE: CB403+ (B50A365B1) 160.71%

152.68%

Case No. 97 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005364AM25 RA File Number 09AX04000934 AM24 Licence No and Date 0911006580/12/01/2024

Case No. 98 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name DEWAN & SONS Meeting Number and Date HQ File Number HQRNORM REVIW00005953AM25 RA File Number 05AX04003870 AM24 Licence No and Date 0511024569/18/03/2024 UDIN00484460AM26

s Case Rejected Party Name DEWAN & SONS Meeting Number and Date HQ File Number HQRNORM REVIW00005953AM25 RA File Number 05AX04003870 AM24 Licence No and Date 0511024569/18/03/2024 UDIN00484460AM26

43 The committee considered the case as per agenda and noted that the firm has wrongly uploaded the application of Doowon Climate Control India Pvt. Ltd for review of the earlier decision of NC-1 for rejection of its case. Hence, the committee decided to reject the case with direction to the applicant to pay Custom duty & applicable interest for EODC.

Case No. 99 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005362AM25 RA File Number 09AX04001142 AM24 Licence No and Date 0911007017/02/04/2024

Case No. 100 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name ABI FLOW PRODUCTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003643AM26 RA File Number 04AX04001153 AM24 Licence No and Date 0411007238/08/04/2024

Case No. 101 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005361AM25 RA File Number 09AX04000069 AM25 Licence No and Date 0911007191/07/05/2024 UDIN00484460AM26

13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005361AM25 RA File Number 09AX04000069 AM25 Licence No and Date 0911007191/07/05/2024 UDIN00484460AM26

Case No. 102 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000844AM25 RA File Number 05AX04000554 AM25 Licence No and Date 0511025666/21/05/2024

Case No. 103 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000856AM25 RA File Number 05AX04000541 AM25 Licence No and Date 0511025676/22/05/2024

Case No. 104 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name UDIN00484460AM26

45 Meeting Number and Date HQ File Number HQRNORM REVIW00001705AM26 RA File Number 09AX04000120 AM25 Licence No and Date 0911007306/27/05/2024

Case No. 105 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006419AM25 RA File Number 05AX04000772 AM25 Licence No and Date 0511026073/12/06/2024

Case No. 106 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BALAJI PRECISION COMPONENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001591AM26 RA File Number 05AX04000878 AM25 Licence No and Date 0511026149/18/06/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 15.07.2025

Case No.

1AM26 RA File Number 05AX04000878 AM25 Licence No and Date 0511026149/18/06/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 15.07.2025

Case No. 107 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name UDIN00484460AM26

46 Meeting Number and Date HQ File Number HQRNORM REVIW00006420AM25 RA File Number 05AX04000380 AM25 Licence No and Date 0511026299/25/06/2024

Case No. 108 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001729AM25 RA File Number 08AX04000526 AM25 Licence No and Date 0811011986/03/07/2024 The Committee considered the case as per agenda. The Committee noted that in this case, comments of DPIIT dated 28.07.2025 have been received. The representative of DPIIT informed the Committee that there is some error in the said comments and as such, he will furnish revised comments in this case. Hence, the Committee decided to defer the case.

Case No. 109 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002375AM25 RA File Number 03AX04002142 AM25 Licence No and Date 0311036160/07/08/2024

UDIN00484460AM26

BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002375AM25 RA File Number 03AX04002142 AM25 Licence No and Date 0311036160/07/08/2024

UDIN00484460AM26

Case No. 110 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002404AM25 RA File Number 03AX04002141 AM25 Licence No and Date 0311036192/08/08/2024

Case No. 111 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number HQRNORM REVIW00005359AM25 RA File Number 09AX04000355 AM25 Licence No and Date 0911007774/21/08/2024 The Committee considered the case as per agenda and taking cue from NC-1 earlier decisions in firm’s similar cases, decided to ratify the ad-hoc norms as per comments of MHI dated 09.12.2025, as under:

Export Products Import item S. No. Description Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery UDIN00484460AM26

.12.2025, as under:

Export Products Import item S. No. Description Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery UDIN00484460AM26

48 1 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BA) 661.56 Stainless steel Bar, Grade: 10705BA 1149.70%

1092.22%

2 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BA-ST) 806.40 Stainless steel Bar, Grade: 10705BA-ST 844.63%

771.35%

3 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BU) 2270.40 Stainless steel Bar, Grade: 10705BU 784.20%

590.48%

4 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BU-G) 112.80 Stainless steel Bar, Grade: 10705BU-G 650%

491.54%

5 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705MBU) 2291.40 Stainless steel Bar, Grade: 10705MBU 755.52%

515.68%

6 TURBINE PARTS (Made from Stainless steel Bar, Grade:MTB10AAM) 1011.78 Stainless steel Bar, Grade: MTB10AAM 642.13%

445.78%

B) COOLANT OIL (IPOL CUT 150 T (CNC/VMC)) may be allowed up to 5% of fob value of export.

Case No. 112 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name PITTI ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002757AM25 RA File Number 09AX04000438 AM25 UDIN00484460AM26

MEET/Nov/202526/13 Case Status Case Rejected Party Name PITTI ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002757AM25 RA File Number 09AX04000438 AM25 UDIN00484460AM26

49 Licence No and Date 0911007839/30/08/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 17.03.2025

Case No. 113 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003547AM25 RA File Number 07AX04001106 AM25 Licence No and Date 0711012521/08/10/2024 comments of Tech-3 dated 16.12.2025, as under:

EP- Add wt.1-39.523 kg.,2-103.484 kg.,3-20.683 kg.,4-32.166 kg. Import 1- 435 kg. after recovery 2- 375kg. After recovery 3- 165 kg. after recovery 4- 305 kg. after recovery Note: Grade of import item will be same as used in EP.

UDIN00484460AM26

Case No. 114 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001709AM26 RA File Number 09AX04000587 AM25 Licence No and Date 0911008229/28/10/2024

Case No. 115 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004014AM25 RA File Number 34AX04000670 AM25 Licence No and Date 3411005645/06/11/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 15.04.2025

Case No.

4AM25 RA File Number 34AX04000670 AM25 Licence No and Date 3411005645/06/11/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 15.04.2025

Case No. 116 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001710AM26 RA File Number 09AX04000643 AM25 Licence No and Date 0911008316/06/11/2024

UDIN00484460AM26

51 Case No. 117 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name GEMSONS PRECISION ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004048AM25 RA File Number 03AX04003840 AM25 Licence No and Date 0311038581/08/11/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 22.04.2025

Case No. 118 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name PAHARPUR COOLING TOWERS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00004076AM25 RA File Number 02AX04000509 AM25 Licence No and Date 0211007586/12/11/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 22.04.2025

Case No. 119 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004246AM25 RA File Number 03AX04004074 AM25 Licence No and 0311038853/20/11/2024 UDIN00484460AM26

y Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004246AM25 RA File Number 03AX04004074 AM25 Licence No and 0311038853/20/11/2024 UDIN00484460AM26

52 Date

Case No. 120 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004569AM25 RA File Number 31AX04000300 AM25 Licence No and Date 3111004162/05/12/2024

Case No. 121 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004943AM25 RA File Number 09AX04000805 AM25 Licence No and Date 0911008674/20/12/2024

Case No. 122 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004944AM25 RA File Number 09AX04000767 AM25 Licence No and 0911008675/20/12/2024 UDIN00484460AM26

53 Date

Case No. 123 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001711AM26 RA File Number 09AX04000744 AM25 Licence No and Date 0911008671/20/12/2024

Case No. 124 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001712AM26 RA File Number 09AX04000788 AM25 Licence No and Date 0911008673/20/12/2024

Case No. 125 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004970AM25 RA File Number 09AX04000792 AM25 Licence No and Date 0911008681/23/12/2024

/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004970AM25 RA File Number 09AX04000792 AM25 Licence No and Date 0911008681/23/12/2024 comments of Consultant (SKB) dated 16.12.2025, as under:

UDIN00484460AM26

54 SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE AND QUANTITY TO BE ALLOWED STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 68X251, 54X181, 42X167, 40X154, 36X245, 42X281, MM 6175.68 KGS INCLUSIVE OF 553.28% WASTAGE ON THE NET WEIGHT OF IMPORTED STEEL IN THE EXPORT PRODUCT. 1 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: 10705BU) NET CONTENT OF IMPORT ITEM SHALL BE 819.84 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 672 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 0.45% OF THE FOB VALUE.

NOTE: THE GRADE OF IMPORTED STEEL SHOULD MATCH THE GRADE OF STEEL OF THE EXPORT PRODUCT.

Case No. 126 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005082AM25 RA File Number 31AX04000343 AM25 Licence No and Date 3111004240/26/12/2024

“The raw material cutting weights and finish material weights indicated by the firm in the manufacturing process flow chart submitted by them, does not appear to be correct. For example for part No. UDIN00484460AM26

tting weights and finish material weights indicated by the firm in the manufacturing process flow chart submitted by them, does not appear to be correct. For example for part No. UDIN00484460AM26

55 "NOZZLEHOLDER SL32", raw material cutting weight has been indicated as 32.61 Kg for raw material size 70 mm DIA x 180 mm length and finish material weight has been indicated as 0.67 Kg. Raw material weight for size 70 mm DIA x 180 mm length should be 5.447 Kg. It is, therefore, requested to clarify the same and submit correct raw material weights and finish material weights for all the items .”

Case No. 127 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name SIAC SKH INDIA CABS MANUFACTURING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005096AM25 RA File Number 05AX04003234 AM25 Licence No and Date 0511029906/27/12/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 11.02.2025

Case No. 128 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name UNI DERITEND LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005102AM25 RA File Number 03AX04004898 AM25 Licence No and Date 0311039967/27/12/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 11.02.2025

UDIN00484460AM26

A File Number 03AX04004898 AM25 Licence No and Date 0311039967/27/12/2024 The committee considered the case as per agenda and noted that a deficiency letter issued on 11.02.2025

UDIN00484460AM26

Case No. 129 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005470AM25 RA File Number 09AX04000877 AM25 Licence No and Date 0911008761/06/01/2025 comments of Consultant (SKB) dated 15.12.2025 , as under : SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

0.45% FOR THE FOB VALUE 1 TURBINE PARTS (MADE BAR, GRADE: 10705BU) NET CONTENT OF IMPORT ITEM SHALL BE 676.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 520 NOS STAINLESS STEEL BARS) GRADE: 10705BU, SIZE: 109X200, 54X181, 101X195, 68X251, 85X251, 42X167, 40X154, 76X157, 36X245, 76X157, MM

4862.00 KG INCLUSIVE OF 619.23% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. TURBINE PARTS (MADE BAR, GRADE: 10705MBU) NET CONTENT OF COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

2 5981 NOS 0.45% FOR THE FOB VALUE UDIN00484460AM26

INLESS STEEL IN THE EXPORT PRODUCT. TURBINE PARTS (MADE BAR, GRADE: 10705MBU) NET CONTENT OF COOLANT OIL (IPOL CUT 150 T (CNC/VMC)

2 5981 NOS 0.45% FOR THE FOB VALUE UDIN00484460AM26

6160.43 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 74X130, 66X112, 63X109, 56X104, 48X97, 50X100, 49X143, 48X92, 47X87, 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 74X123, 65X113, 48X97, 48X87, 74X130, 184X272, 29X115, MM 41807.19 KGS INCLUSIVE OF 578.64% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF THE IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STEEL OF THE EXPORT PRODUCT.

Case No. 130 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00005668AM25 RA File Number 05AX04003580 AM25 Licence No and Date 0511030336/15/01/2025

Case No. 131 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005706AM25 RA File Number 05AX04003463 AM25 UDIN00484460AM26

ov/202526/13 Case Status Case Deferred Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005706AM25 RA File Number 05AX04003463 AM25 UDIN00484460AM26

58 Licence No and Date 0511030374/17/01/2025

Case No. 132 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005710AM25 RA File Number 05AX04003503 AM25 Licence No and Date 0511030377/17/01/2025

Case No. 133 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005736AM25 RA File Number 09AX04000963 AM25 Licence No and Date 0911008865/20/01/2025 comments of Consultant (SKB) dated 15.12.2025 , as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED 1 TURBINE BLADE (MADE 280 NOS STAINLESS STEEL 4326.00 KG UDIN00484460AM26

59 BARS, GRADE: 10705BA,

SIZE: 118X175, 118X146, 118X175, 135X178, MM INCLUSIVE OF 602.27% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. FROM STAINLESS STEEL BAR, GRADE: 10705BA) THE NET CONTENT OF THE 616.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 0.45% OF THE FOB VALUE STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 36X283, 36X245, 42X167, 40X154, 42X281, 33X265, 29X245, MM 5492.48 Kgs INCLUSIVE OF 604.60% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 2 TURBINE BLADE (MADE FROM STAINLESS STEEL

40X154, 42X281, 33X265, 29X245, MM 5492.48 Kgs INCLUSIVE OF 604.60% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 2 TURBINE BLADE (MADE FROM STAINLESS STEEL BAR, GRADE: 10705BU) THE NET CONTENT OF THE 779.52 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 896 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 0.43% OF THE FOB VALUE

NOTE: THE GRADE OF THE IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 134 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005822AM25 RA File Number 05AX04003343 AM25 Licence No and 0511030501/23/01/2025 UDIN00484460AM26

60 Date

Case No. 135 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005833AM25 RA File Number 09AX04000978 AM25 Licence No and Date 0911008893/24/01/2025 comments of Consultant (SKB) dated 15.12.2025 , as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 0.45% of FOB value STAINLESS STEEL BARS) GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, 74X123, 65X113, 48X97,48X87, 29X115, 132X340, 134X262, 184X272, 134X262, 184X272, 114X336, 1 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705MBU) Net content of import item shall be 3,676.00 kgs, which should be reflected in the shipping bills and invoice. 3676 NOS

6, 1 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705MBU) Net content of import item shall be 3,676.00 kgs, which should be reflected in the shipping bills and invoice. 3676 NOS 26136.36 KGS INCLUSIVE OF 611% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00484460AM26

61 66X112,63X109, 114X336, 56X104, 54X112, 48X97, 48X116, 61X110, 49X143, 48X92, 55X90, 46X85, 48X92, 48X97, 46X99, 46X105, 56X94, 54X112, 55X100, 47X87, MM

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

Case No. 136 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005834AM25 RA File Number 09AX04000979 AM25 Licence No and Date 0911008894/24/01/2025

Case No. 137 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name UNI DERITEND LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005886AM25 RA File Number 03AX04005530 AM25 Licence No and Date 0311040768/27/01/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.02.2025 UDIN00484460AM26

RA File Number 03AX04005530 AM25 Licence No and Date 0311040768/27/01/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.02.2025 UDIN00484460AM26

Case No. 138 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005928AM25 RA File Number 09AX04000999 AM25 Licence No and Date 0911008937/29/01/2025

Case No. 139 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005929AM25 RA File Number 09AX04001000 AM25 Licence No and Date 0911008938/29/01/2025

Case No. 140 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005940AM25 RA File Number 05AX04003502 AM25 Licence No and Date 0511030629/30/01/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.02.2025 UDIN00484460AM26

RA File Number 05AX04003502 AM25 Licence No and Date 0511030629/30/01/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.02.2025 UDIN00484460AM26

Case No. 141 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005960AM25 RA File Number 33AX04000119 AM25 Licence No and Date 3311002507/30/01/2025

Case No. 142 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number HQRNORM APPLY 00005961AM25 RA File Number 07AX04001780 AM25 Licence No and Date 0711013516/30/01/2025 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE: Application on ANF 4A & copy of AA are required. i.

Case No. 143 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006090AM25 RA File Number 34AX04000973 AM25 Licence No and Date 3411006060/10/02/2025 UDIN00484460AM26

CTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006090AM25 RA File Number 34AX04000973 AM25 Licence No and Date 3411006060/10/02/2025 UDIN00484460AM26

64 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025

Case No. 144 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006091AM25 RA File Number 34AX04000972 AM25 Licence No and Date 3411006061/10/02/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 29.04.2025

Case No. 145 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name UNI DERITEND LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006114AM25 RA File Number 03AX04005717 AM25 Licence No and Date 0311041199/10/02/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 17.03.2025

UDIN00484460AM26

A File Number 03AX04005717 AM25 Licence No and Date 0311041199/10/02/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 17.03.2025

UDIN00484460AM26

Case No. 146 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name S K INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00006128AM25 RA File Number 34AX04000978 AM25 Licence No and Date 3411006063/11/02/2025 comments of DPIIT dated 07.10.2025, as under: Description, quantities and weight of export item may be specified as under: 1. Sr.No Description FINISH OD (mm) FINISH ID (mm) FINISH WIDTH (mm) Qty in Nos. Net weight (Kgs) 1 1SCB180Y1 OUTER 180.8 160 34.25 151 235.636 2 2SCB180Y1 INNER 139 99.44 34.2 151 160.815 TOTAL 302 396.451 2. Import item at SI No.1 shall be of relevant grade and diameter as contained / utilized in the export item and its quantity may be allowed as 946.74 Kgs as 2.38 Kgs/Kg content in the export item after taking
1/3rd recovery from the scrap.

Case No. 147 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006130AM25 RA File Number 03AX04005756 AM25 Licence No and 0311041210/11/02/2025 UDIN00484460AM26

ed Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006130AM25 RA File Number 03AX04005756 AM25 Licence No and 0311041210/11/02/2025 UDIN00484460AM26

66 Date The Committee considered the case as per agenda. It was observed by the Committee that wastage recommended by Meity in respect of import item no.1 is 3.5%. The view of the Committee was that the same should be 2% and as such, it was decided by the Committee to seek clarification from Meity in this matter.

Case No. 148 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name FINEPAC STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006183AM25 RA File Number 31AX04000434 AM25 Licence No and Date 3111004426/12/02/2025 comments of DPIIT dated 25.09.2025,as under: Net weight of export items at SI.No 1 to 19 may be specified as under: 1. SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) 1 1470.58 7 478.59 13 272.29 19 1203.85 2 1801.32 8 27.88 14 179.12 3 1493.94 9 64.14 15 7.57 4 1606 10 296.57 16 3346.66 5 1278.54 11 10.16 17 1203.87 6 27.07 12 169.4 18 1888.65

Quantity of import items at Sl.No. 3 to 8 , 12 to 17, 20 to 25, 29 to 34, 38 to 43, 50 to 54, 60 to 62, 66 to 70 , 74 , 75, 77 ,78, 85 , 86, 93 , 94, 129, 130, 135 , 136, 139 to 143, 148 & 149 may be allowed on net UDIN00484460AM26

o 8 , 12 to 17, 20 to 25, 29 to 34, 38 to 43, 50 to 54, 60 to 62, 66 to 70 , 74 , 75, 77 ,78, 85 , 86, 93 , 94, 129, 130, 135 , 136, 139 to 143, 148 & 149 may be allowed on net UDIN00484460AM26

67 to net basis in the respective export items with accountability clause. 3.Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 849.66 Kgs as 1.082 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 4. Import item at SI No.2 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 684 Kgs as 1.03 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 5. Import item at SI No.9 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 1852 Kgs as 1.56 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 6. Import item at SI No.10 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 690 Kgs as 1.36 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 7. Import item at SI No.18 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 950.33 Kgs as 1.09 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 8.

ontained / utilized in the export item at SI.No.3 and its quantity may be allowed as 950.33 Kgs as 1.09 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 8. Import item at SI No.19 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 613.33 Kgs as 1.03 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 9. Import item at SI No.26 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 1440 Kgs as 1.45 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 10. Import item at SI No.27 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 694.66 Kgs as1.33 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 11. Import item at SI No.35 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 1385.33 Kgs as 1.71 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 12.

ained / utilized in the export item at SI.No.5 and its quantity may be allowed as 1385.33 Kgs as 1.71 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 12. Import item at SI No.36 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 490 Kgs as 1.25 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 13.Import item at SI No.44 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 31 Kgs as 1.82 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 14. Import item at SI No.45 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 9.33 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

lized in the export item at SI.No.6 and its quantity may be allowed as 9.33 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

68 15. Import item at SI No.47 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 355.66 Kgs as 1.34 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 16. Import item at SI No.48 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 211.33 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 17. Import item at SI No.55 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 22 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 18. Import item at SI No.56 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 9 Kgs as 1.28 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 19. Import item at SI No.58 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 54.66 Kgs as 1.24 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 20.

ntained / utilized in the export item at SI.No.9 and its quantity may be allowed as 54.66 Kgs as 1.24 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 20. Import item at SI No.59 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 8.66 Kgs as 1.44 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 21. Import item at SI No.63 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 315.33 Kgs as 1.62 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 22. Import item at SI No.64 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 80.33 Kgs as 1.10 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 23. Import item at SI No.71 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 13.33 Kgs as 3.33 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 24. Import item at SI No.72 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 7.66 Kgs as 1.53 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 25.

tained / utilized in the export item at SI.No.11 and its quantity may be allowed as 7.66 Kgs as 1.53 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 25. Import item at SI No.76 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 86 Kgs as 1.13 Kgs/Kg content in the export item at SI.No.12 after taking 1/3rd recovery from the scrap. 26. Import item at SI No.79 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 150.66 Kgs as 1.19 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 27. Import item at SI No.80 shall be of relevant grade and thickness as contained / utilized in the export UDIN00484460AM26

69 item at SI.No.13 and its quantity may be allowed as 97 Kgs as 1.36 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 28. Import item at SI No.83 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 19 Kgs as 1.11 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 29. Import item at SI No.84 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 33.33 Kgs as 1.11 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 30.

tained / utilized in the export item at SI.No.13 and its quantity may be allowed as 33.33 Kgs as 1.11 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 30. Import item at SI No.87 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 94 Kgs as 1.20 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 31. Import item at SI No.88 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 82.66 Kgs as 1.08 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 32. Import item at SI No.89 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 8 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 33. Import item at SI No.92 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 2.66 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 34. Import item at SI No.95 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as 4.73 Kgs as 1.12 Kgs/Kg content in the export item at SI.No.15 after taking 1/3rd recovery from the scrap. 35.

ntained / utilized in the export item at SI.No.15 and its quantity may be allowed as 4.73 Kgs as 1.12 Kgs/Kg content in the export item at SI.No.15 after taking 1/3rd recovery from the scrap. 35. Import item at SI No.96 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as 3.66 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.15 after taking 1/3rd recovery from the scrap. 36. Import item at SI No.98 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 2413.66 Kgs as 1.07 Kgs/Kg content in the export item at SI.No.16 after taking 1/3rd recovery from the scrap. 37. Import item at SI No.126 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 360 Kgs as 1.28 Kgs/Kg content in the export item at SI.No.16 after taking 1/3rd recovery from the scrap. 38. Import item at SI No.127 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 31.66 Kgs as 1.26 Kgs/Kg content in the export item at SI.No16 after taking 1/3rd recovery from the scrap. 39. Import item at SI No.128 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 119.33 Kgs as 1.14 Kgs/Kg content in the export item at SI.No.16 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

ed in the export item at SI.No.16 and its quantity may be allowed as 119.33 Kgs as 1.14 Kgs/Kg content in the export item at SI.No.16 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

70 40. Import item at SI No.131 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 716.66 Kgs as 1.06 Kgs/Kg content in the export item at SI.No.17 after taking 1/3rd recovery from the scrap. 39. Import item at SI No.132 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 388.66 Kgs as 1.17 Kgs/Kg content in the export item at SI.No.17 after taking 1/3rd recovery from the scrap. 40. Import item at SI No.133 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 13.33 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.17 after taking 1/3rd recovery from the scrap. 41. Import item at SI No.134 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 74.33 Kgs as 1.10 Kgs/Kg content in the export item at SI.No.17 after taking 1/3rd recovery from the scrap. 42. Import item at SI No.137 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 1801.66 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.18 after taking 1/3rd recovery from the scrap. 43.

ined / utilized in the export item at SI.No.18 and its quantity may be allowed as 1801.66 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.18 after taking 1/3rd recovery from the scrap. 43. Import item at SI No.138 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 514 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.18 after taking 1/3rd recovery from the scrap. 44. Import item at SI No.144 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 571.33 Kgs as 1.06 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 45. Import item at SI No.145 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 443.33 Kgs as 1.34 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 46. Import item at SI No.146 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 13.33 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 47.

tained / utilized in the export item at SI.No.19 and its quantity may be allowed as 13.33 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 47. Import item at SI No.147 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 74.33 Kgs as 1.10 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap.

Case No. 149 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date UDIN00484460AM26

71 HQ File Number HQRNORM APPLY 00006206AM25 RA File Number 34AX04000976 AM25 Licence No and Date 3411006084/13/02/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 17.03.2025

Case No. 150 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name STERLITE TECH CABLES SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006251AM25 RA File Number 03AX04005771 AM25 Licence No and Date 0311041403/17/02/2025 The Committee considered the case as per agenda. It was observed by the Committee that the clarification sought vide NC-1 mail dated 12.11.2025 from Meity as per decision taken in NC-1 meeting dt.11.11.2025, is still awaited. Hence, the Committee decided to issue reminder to Meity.

t the clarification sought vide NC-1 mail dated 12.11.2025 from Meity as per decision taken in NC-1 meeting dt.11.11.2025, is still awaited. Hence, the Committee decided to issue reminder to Meity.

Case No. 151 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name NOV MFG INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006352AM25 RA File Number 31AX04000445 AM25 Licence No and Date 3111004458/21/02/2025 UDIN00484460AM26

Case No. 152 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name ALLMET INNOVATIONS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006357AM25 RA File Number 13AX04000370 AM25 Licence No and Date 1311003708/21/02/2025

Case No. 153 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00006364AM25 RA File Number 05AX04003928 AM25 Licence No and Date 0511031037/24/02/2025

Case No. 154 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006375AM25 RA File Number 09AX04001084 AM25 Licence No and Date 0911009097/24/02/2025

Case No. 155 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

File Number HQRNORM APPLY 00006375AM25 RA File Number 09AX04001084 AM25 Licence No and Date 0911009097/24/02/2025

Case No. 155 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

73 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006386AM25 RA File Number 09AX04001027 AM25 Licence No and Date 0911009100/24/02/2025

Case No. 156 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name S K INDUSTRIES HQ File Number HQRNORM REVIW00004173AM26 RA File Number 34AX04001024 AM25 Licence No and Date 3411006127/26/02/2025 comments of DPIIT dated 01.12.2025, as under:

Description, quantities and weight of export item under the Advance Authorisation may be specified as under: 1. Export item No. 1.1 Sl.No Description FINISH OD
(mm) FINISH ID (mm) FINISH WIDTH (mm) Qty in Nos Net weight (Kgs) 1 Bearing Parts Races 130X103Y8.D40.IN 35.23 29.223 10.135 1900 40.85 2 Bearing Parts Races AR.B7003C.BZ.W230.D40.IN 35.243 29.375 10.135 600 9.6 3 Bearing Parts Races AR.HSS7003.W230.D40.IN 35.243 27.927 10.135 600 13.8 UDIN00484460AM26

5.23 29.223 10.135 1900 40.85 2 Bearing Parts Races AR.B7003C.BZ.W230.D40.IN 35.243 29.375 10.135 600 9.6 3 Bearing Parts Races AR.HSS7003.W230.D40.IN 35.243 27.927 10.135 600 13.8 UDIN00484460AM26

74 4 Bearing Parts Races QC005868-2-2 40.4 32.4 24.3 800 54 5 Bearing Parts Races QC005312-2-2 28.12 23.4 8.08 750 7.875 6 Bearing Parts Races QC005281-2-2

28.12 21.8 8.08 800 8.8 7 Bearing Parts Races QC004595-1-2-

38.34 29.86 9.58 800 21.6 TOTAL 156.525

Export item No. 1.2 Sl.No Description FINISH OD
(mm) FINISH ID (mm) FINISH WIDTH (mm) Qty in Nos Net weight (Kgs) 1 Bearing Parts Races 130X105HY34.D40.IN 47.269 40.246 12.129 1335 42.053 2 Bearing Parts Races QC006033-2-1 OUTER 47.14 37.85 14.08 300 16.5 Bearing Parts Races 3 44.563 32.44 9.625 300 12.6 UDIN00484460AM26

75 QC002971-2-1 4 Bearing Parts Races QC006037-1-1 47.9 44.29 5.063 300 3 5 Bearing Parts Races QC006115-2-1 42.12 35.3 12.08 300 9 6 Bearing Parts Races QC003095-2-1 44.583 32.4 20.451 300 27.9 7 Bearing Parts Races QC003272-2-2 42.14 38.28 7.08 300 3.15 8 Bearing Parts Races QC003475-2-3 42.14 37.68 7.08 300 3.15 TOTAL 114.203

Export item No. 1.3 Sl.No Description FINISH OD
(mm) FINISH ID (mm) FINISH WIDTH (mm) Qty in Nos Net weight (Kgs) 1 Bearing Parts Races 130X36Y60.D40.IN 19.215 9.322 7.201 15000 90 2 Bearing Parts Races 230X103Y8.D40.IN 22.82 16.83 10.14 1660 20.75 TOTAL 110.75 UDIN00484460AM26

m) Qty in Nos Net weight (Kgs) 1 Bearing Parts Races 130X36Y60.D40.IN 19.215 9.322 7.201 15000 90 2 Bearing Parts Races 230X103Y8.D40.IN 22.82 16.83 10.14 1660 20.75 TOTAL 110.75 UDIN00484460AM26

Export item No. 1.4 Sl.No Description FINISH OD
(mm) FINISH ID (mm) FINISH WIDTH (mm) Qty in Nos Net weight (Kgs) 1 Bearing Parts Races 130X105HY34.D40.IN 13.21 10.54 4.08 13000 13 2 Bearing Parts Races QC006033-2-1 OUTER 8.51 4.88 4.08 13000 19.5 3 Bearing Parts Races QC002971-2-1 10.90 6.81 6.13 800 1.6 4 Bearing Parts Races QC006037-1-1 12.97 7.85 5.82 800 2.8 5 Bearing Parts Races QC006115-2-1 7.05 3.85 5.11 800 0.8 TOTAL 37.7

Quantity of import item may be allowed as under: 2.

   For Export item No. 1.1

Stainless Steel Bar CRONIDUR 30, Ø 42.00 MM may be allowed as 794.841 Kgs. as 5.07 Kgs./Kg. content in the export item after taking 1/3rd recovery from the scrap.

UDIN00484460AM26

77 For Export item No. 1.2 Stainless Steel Bar CRONIDUR 30, Ø 50.00 MM may be allowed as 613.223 Kgs. as 5.36 Kgs./Kg. content in the export item after taking 1/3rd recovery from the scrap.

For Export item No. 1.3 Stainless Steel Bar CRONIDUR 30, Ø 25.00 MM may be allowed as 571.103 Kgs. as 5.15 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap.

For Export item No. 1.4 Stainless Steel Bar CRONIDUR 30, Ø 30.00 MM may be allowed as 281.95 Kgs as 7.47 Kgs./Kg.

5.15 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap.

For Export item No. 1.4 Stainless Steel Bar CRONIDUR 30, Ø 30.00 MM may be allowed as 281.95 Kgs as 7.47 Kgs./Kg. content in the export item after taking 1/3rd recovery from the scrap.

Case No. 157 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006491AM25 RA File Number 05AX04004084 AM25 Licence No and Date 0511031154/03/03/2025

Case No. 158 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006500AM25 UDIN00484460AM26

78 RA File Number 05AX04003868 AM25 Licence No and Date 0511031165/03/03/2025

Case No. 159 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004160AM26 RA File Number 31AX04000452 AM25 Licence No and Date 3111004502/07/03/2025 comments of DPIIT dated 01.12.2025, as under:

Import item at SI.No.1 shall be of relevant grade and diameter as contained in the export item at SI.No. 1 and its quantity may be allowed as 185. 24 Kgs. as 1.10 Kgs./ Kg. content in the export item at SI.No.1 after 20 % recovery from scrap. 1. Import item at SI.No.2 shall be of relevant grade and diameter as contained in the export item at SI.No. 1 and its quantity may be allowed as applied for i.e 155.22 Kgs. as 1.001 Kgs./ Kg. content in the export item at SI.No.1 2.

elevant grade and diameter as contained in the export item at SI.No. 1 and its quantity may be allowed as applied for i.e 155.22 Kgs. as 1.001 Kgs./ Kg. content in the export item at SI.No.1 2. Import item at SI.No.3 shall be of relevant grade and diameter as contained in the export item at SI.No. 1 and its quantity may be allowed as applied for i.e 177.03 Kgs. as 1.02 Kgs./ Kg. content in the export item at SI.No.1 3. Import item at SI.No.4 shall be of relevant grade and diameter as contained in the export item at SI.No. 2 and its quantity may be allowed as 185. 24 Kgs. as 1.10 Kgs./ Kg. content in the export item at SI.No.2 after 20 % recovery from scrap. 4. Import item at SI.No.5 shall be of relevant grade and diameter as contained in the export item at SI.No. 2 and its quantity may be allowed as applied for i.e 155.22 Kgs. as 1.001 Kgs./ Kg. content content in the export item at SI.No.2 5. Import item at SI.No.6 shall be of relevant grade and diameter as contained in the export item at SI.No. 2 and its quantity may be allowed as applied for i.e 177.03 Kgs. as 1.02 Kgs./ Kg. content in the export item at SI.No.2 6. Import item at SI.No.7 shall be of relevant grade and diameter as contained in the export item at SI.No. 3 and its quantity may be allowed as 60.79 Kgs. as 1.12 Kgs./ Kg. content in the export item at SI.No.3 after 20 % recovery from scrap. . 7. Import item at SI.No.8 shall be of relevant grade and diameter as contained in the export item at SI.No. 3 and its quantity may be allowed as 69.02 Kgs.

o.3 after 20 % recovery from scrap. . 7. Import item at SI.No.8 shall be of relevant grade and diameter as contained in the export item at SI.No. 3 and its quantity may be allowed as 69.02 Kgs. as 1.21 Kgs./ Kg. content in the export item at SI.No.3 after 20 % recovery from scrap.. 8. UDIN00484460AM26

79 Import item at SI.No.9 shall be of relevant grade and diameter as contained in the export item at SI.No. 3 and its quantity may be allowed as 74.86 Kgs. as 1.46 Kgs./ Kg. content in the export item at SI.No.3 after 20 % recovery from scrap. . 9. Import item at SI.No.10 shall be of relevant grade and diameter as contained in the export item at SI.No. 4 and its quantity may be allowed as 60.79 Kgs. as 1.12 Kgs./ Kg. content in the export item at SI.No.4 after 20 % recovery from scrap. . 10. Import item at SI.No.11 shall be of relevant grade and diameter as contained in the export item at SI.No. 4 and its quantity may be allowed as 69.02 Kgs. as 1.21 Kgs./ Kg. content in the export item at SI.No.4 after 20 % recovery from scrap.. 11. Import item at SI.No.12 shall be of relevant grade and diameter as contained in the export item at SI.No. 4 and its quantity may be allowed as 74.86 Kgs. as 1.46 Kgs./ Kg. content in the export item at SI.No.4 after 20 % recovery from scrap. . 12. Import item at SI.No.13 shall be of relevant grade and diameter as contained in the export item at SI.No. 5 and its quantity may be allowed as 23.34 Kgs. as 1.45 Kgs./ Kg. content in the export item at SI.No.5 after 20 % recovery from scrap. 13.

and diameter as contained in the export item at SI.No. 5 and its quantity may be allowed as 23.34 Kgs. as 1.45 Kgs./ Kg. content in the export item at SI.No.5 after 20 % recovery from scrap. 13. Import item at SI.No.14 shall be of relevant grade and diameter as contained in the export item at SI.No. 6 and its quantity may be allowed as 23.34 Kgs. as 1.45 Kgs./ Kg. content in the export item at SI.No.6 after 20 % recovery from scrap.. 14. Import item at SI.No.15 shall be of relevant grade and thickness as contained in the export item at SI.No. 7 and its quantity may be allowed as 12.72 Kgs. as 1.32 Kgs./ Kg. content in the export item at SI.No.7 after 20 % recovery from scrap. . 15. Import item at SI.No.16 shall be of relevant grade and thickness as contained in the export item at SI.No. 8 and its quantity may be allowed as 12.72 Kgs. as 1.32 Kgs./ Kg. content in the export item at SI.No.8 after 20 % recovery from scrap.. 16. Import item at SI.No.17 shall be of relevant grade and thickness as contained in the export item at SI.No. 9 and its quantity may be allowed as 12.72 Kgs. as 1.32 Kgs./ Kg. content in the export item at SI.No. 9after 20 % recovery from scrap. 17.

nd thickness as contained in the export item at SI.No. 9 and its quantity may be allowed as 12.72 Kgs. as 1.32 Kgs./ Kg. content in the export item at SI.No. 9after 20 % recovery from scrap. 17.

Case No. 160 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name GRINDLAYS ENGINE PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM25 RA File Number 05AX04004238 AM25 Licence No and Date 0511031295/11/03/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.05.2025 UDIN00484460AM26

Case No. 161 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006888AM25 RA File Number 09AX04001112 AM25 Licence No and Date 0911009295/25/03/2025

Case No. 162 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006889AM25 RA File Number 09AX04001096 AM25 Licence No and Date 0911009296/25/03/2025

Case No. 163 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006890AM25 RA File Number 09AX04001111 AM25 Licence No and Date 0911009297/25/03/2025

Case No. 164 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

File Number HQRNORM APPLY 00006890AM25 RA File Number 09AX04001111 AM25 Licence No and Date 0911009297/25/03/2025

Case No. 164 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

81 Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006900AM25 RA File Number 09AX04001171 AM25 Licence No and Date 0911009307/26/03/2025

Case No. 165 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006901AM25 RA File Number 09AX04001113 AM25 Licence No and Date 0911009308/26/03/2025

Case No. 166 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000157AM26 RA File Number 31AX04000003 AM26 Licence No and Date 3111004645/09/04/2025

be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, 3. UDIN00484460AM26

82 if any, may also be indicated. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 167 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000204AM26 RA File Number 05AX04000022 AM26 Licence No and Date 0511031884/11/04/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.06.2025

Case No. 168 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BENGAL INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000239AM26 RA File Number 05AX04000095 AM26 Licence No and Date 0511031906/15/04/2025

Case No. 169 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number UDIN00484460AM26

0000239AM26 RA File Number 05AX04000095 AM26 Licence No and Date 0511031906/15/04/2025

Case No. 169 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number UDIN00484460AM26

83 and Date HQ File Number HQRNORM APPLY 00000243AM26 RA File Number 09AX04000025 AM26 Licence No and Date 0911009431/15/04/2025

Case No. 170 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000290AM26 RA File Number 09AX04000023 AM26 Licence No and Date 0911009449/17/04/2025

Case No. 171 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000323AM26 RA File Number 09AX04000033 AM26 Licence No and Date 0911009463/18/04/2025 comments of Consultant (SKB) dated 15.12.2025 as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED TURBINE PARTS (MADE FROM STAINLESS STEEL BAR, STAINLESS STEEL BARS GRADE: 10705BA, SIZE: 59X177, 73X118, 4269.60 KGS INCLUSIVE OF 626.23% WASTAGE ON THE NET WEIGHT STAINLESS STEEL BAR 1 240 NOS UDIN00484460AM26

TAINLESS STEEL BAR, STAINLESS STEEL BARS GRADE: 10705BA, SIZE: 59X177, 73X118, 4269.60 KGS INCLUSIVE OF 626.23% WASTAGE ON THE NET WEIGHT STAINLESS STEEL BAR 1 240 NOS UDIN00484460AM26

84 86X146, MM IN THE EXPORT PRODUCT. GRADE: 10705BA) NET CONTENT OF IMPORT ITEM SHALL BE 588.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% OF FOB VALUE STAINLESS STEEL BARS GRADE: 10705BU, SIZE: 42X167, 40X154, 42X281, 36X283, 33X265, 29X245, MM 2609.34 KGS INCLUSIVE OF 752.30% WASTAGE ON THE NET WEIGHT STAINLESS STEEL BAR IN THE EXPORT PRODUCT. 2 TURBINE PARTS (MADE BAR, GRADE: 10705BU) NET CONTENT OF 306.15 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 471 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% OF FOB VALUE (STAINLESS STEEL BARS) GRADE: 10705MBU, SIZE: 29X115, 74X123, 65X113, 56X106, 48X97, 48X87, MM 18200.00 KGS INCLUSIVE OF 562.10% WASTAGE ON THE NET WEIGHT STAINLESS STEEL BAR IN THE EXPORT PRODUCT. 3 TURBINE PARTS (MADE BAR, GRADE: 10705MBU) NET CONTENT OF 2750.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE 2500 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% OF FOB VALUE

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH WITH THE GRADE OF STAINLESS STEEL IN THE EXPORT PRODUCT.

Case No. 172 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000324AM26 RA File Number 09AX04000024 AM26 UDIN00484460AM26

85 Licence No and Date 0911009464/18/04/2025

Case No. 173 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000338AM26 RA File Number 09AX04000052 AM26 Licence No and Date 0911009470/20/04/2025

Case No. 174 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000342AM26 RA File Number 09AX04000053 AM26 Licence No and Date 0911009478/21/04/2025 comments of Consultant (SKB) dated 15.12.2025 , as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED TURBINE PARTS (MADE BAR, GRADE: 10705BA- ST) NET CONTENT OF 1664.40 KGS, WHICH 7894.25 KG INCLUSIVE OF 374.30% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT 1 2190 NOS (STAINLESS STEEL BARS) GRADE: 10705BA-ST, SIZE: 55X90, 47X75, 33X52, 40X62, 68X97, MM UDIN00484460AM26

0% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT 1 2190 NOS (STAINLESS STEEL BARS) GRADE: 10705BA-ST, SIZE: 55X90, 47X75, 33X52, 40X62, 68X97, MM UDIN00484460AM26

86 PRODUCT. SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% FOR THE FOB VALUE (STAINLESS STEEL BARS) GRADE: 10705BU, SIZE: 47X75, 40X62, 33X52, MM 3924.63 KG INCLUSIVE OF 366.13% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 2 TURBINE PARTS (MADE BAR, GRADE: 10705BU) NET CONTENT OF 841.96 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 1358 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% FOR THE FOB VALUE (STAINLESS STEEL BARS) GRADE: 10705MBU, SIZE: 33X52, 40X68 MM 3917.30 KG INCLUSIVE OF 413.02% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 3 TURBINE PARTS (MADE BAR, GRADE: 10705MBU) NET CONTENT OF 765.24 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 1822 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% FOR THE FOB VALUE (STAINLESS STEEL BARS) GRADE: MTB10AAM, SIZE: 40X68, 33X52, 55X90, 47X75, 43X62, MM 5968.44 KG INCLUSIVE OF 360.70% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL IN THE EXPORT PRODUCT. 4 TURBINE PARTS (MADE BAR, GRADE: MTB10AAM) NET CONTENT OF IMPORT ITEM SHALL BE 1295.64 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE.

TEEL IN THE EXPORT PRODUCT. 4 TURBINE PARTS (MADE BAR, GRADE: MTB10AAM) NET CONTENT OF IMPORT ITEM SHALL BE 1295.64 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 2124 NOS COOLANT OIL (IPOL CUT 150 T (CNC/VMC) 1% FOR THE FOB VALUE

NOTE: THE IMPORTED STAINLESS STEEL SHOULD MATCH THE STAINLESS STEEL OF THE EXPORT PRODUCT. UDIN00484460AM26

Case No. 175 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name COCHIN SHIPYARD LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000350AM26 RA File Number 10AX04000344 AM25 Licence No and Date 1011003059/21/04/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.05.2025

Case No. 176 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000417AM26 RA File Number 34AX04000042 AM26 Licence No and Date 3411006334/23/04/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.05.2025

Case No. 177 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

04/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 27.05.2025

Case No. 177 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred UDIN00484460AM26

88 Party Name AIM NONWOVENS AND INTERIORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000863AM26 RA File Number 31AX04000049 AM26 Licence No and Date 3111004789/16/05/2025

Case No. 178 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00000961AM26 RA File Number 05AX04000604 AM26 Licence No and Date 0511032752/21/05/2025

Case No. 179 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001051AM26 RA File Number 03AX04000770 AM26 Licence No and Date 0311044180/24/05/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 12.09.2025

Case No. 180 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected UDIN00484460AM26

05/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 12.09.2025

Case No. 180 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected UDIN00484460AM26

89 Party Name DANVITA (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001501AM26 RA File Number 03AX04001271 AM26 Licence No and Date 0311044813/14/06/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 12.09.2025

Case No. 181 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00001694AM26 RA File Number 09AX04000202 AM26 Licence No and Date 0911009911/25/06/2025 The Committee considered the case as per agenda and taking cue from NC-1 earlier decisions in firm’s similar cases decided to ratify the ad-hoc norms as per comments of MHI dated 09.12.2025, as under:

A) Export Products Import item S. No Description Qty. in Nos. Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery TURBINE PARTS (Made from BLADE MATERIAL(STAINLESS STEEL BARS) GRADE: (STAINLESS STEEL BARS) GRADE: 10705BA, SIZE: 1 240 600 1059.65%

774.89%

UDIN00484460AM26

e allowed after recovery TURBINE PARTS (Made from BLADE MATERIAL(STAINLESS STEEL BARS) GRADE: (STAINLESS STEEL BARS) GRADE: 10705BA, SIZE: 1 240 600 1059.65%

774.89%

UDIN00484460AM26

90 10705BA ) 178X135, 73X118, 118X175, MM 2 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BU) 471 376.80 (STAINLESS STEEL BARS) GRADE: 10705BU, SIZE: 42X167, 40X154, 42X281, 36X283, 33X265, 29X245, MM 1061.49%

718.28%

3 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705MBU) 1276 957 (STAINLESS STEEL BARS) GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, MM 1266.89%

842.45%

B) COOLANT OIL (IPOL CUT 150 T (CNC/VMC)) may be allowed up to 5% of fob value of export.

Case No. 182 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name TEMA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001852AM26 RA File Number 03AX04001647 AM26 Licence No and Date 0311045350/04/07/2025 UDIN00484460AM26

Party Name TEMA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001852AM26 RA File Number 03AX04001647 AM26 Licence No and Date 0311045350/04/07/2025 UDIN00484460AM26

91 comments of DPIIT dated 14.11.2025, as under:

Net weight of export items at SI.No. 1 to 15 may be specified as under: 1. S.No. Net weight (Kgs) S.No. Net weight (Kgs) S.No. Net weight (Kgs) 1 7814 7 17582 13 10779 2 3636 8 37586 14 1851 3 3243 9 12287 15 3474 4 1406 10 10765 5 7168 11 2554 6 3406 12 2013

2 . Import item at SI No. 1 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 2384.7 Kgs as 1.074 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 3. Import item at SI No.2 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 6154.8 Kgs as 1.065 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 4. Import item at SI No. 3 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 15465.8 Kgs as 1.074 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 5.

ained / utilized in the export item at SI.No.7 and its quantity may be allowed as 15465.8 Kgs as 1.074 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 5. Import item at SI No.4 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 32531.02 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 6. Import item at SI No.5 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 10100.14 Kgs as 1.073 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 7. Import item at SI No.6 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 1902.43 Kgs as 1.045 Kgs/Kg content in the export item at UDIN00484460AM26

of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 1902.43 Kgs as 1.045 Kgs/Kg content in the export item at UDIN00484460AM26

92 SI.No.11 after taking 1/3rd recovery from the scrap. 8. Import item at SI No.7 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 1531 Kgs as 1.23 Kgs/Kg content in the export item at SI.No.12 after taking 1/3rd recovery from the scrap. 9. Import item at SI No.8 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 9821.7 Kgs as 1.038 Kgs/Kg content in the export item at SI.No.13 . 10. Import item at SI No.9 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 1694.5 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 11. Import item at SI No.10 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as 2323.7 Kgs as 1.048 Kgs/Kg content in the export item at SI.No.15 . 12. Import item at SI No.11 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as applied for i.e. 327 Kgs as 1.076 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 13.

ed in the export item at SI.No.5 and its quantity may be allowed as applied for i.e. 327 Kgs as 1.076 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 13. Import item at SI No.12 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 96.41 Kgs as 1.20 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 14. Import item at SI No.13 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as applied for i.e91 Kgs as 1.21 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 15. Import item at SI No.14 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as applied for i.e. 188Kgs as 1.22 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 16. Import item at SI No.15 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as applied for i.e. 684 Kgs as 1.18 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 17. Import item at SI No.16 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as applied for i.e.

ery from the scrap. 17. Import item at SI No.16 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as applied for i.e. 218Kgs as 1.20 Kgs/Kg content in the export item at SI.No.12 after taking 1/3rd recovery from the scrap. 18. Import item at SI No.17 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as applied for i.e. 942 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 19. Import item at SI No.18 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as applied for i.e. 864 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.15 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

93 20. Import item at SI No.19 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 10695.28 Kgs as 1.07 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 21. Import item at SI No.20 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 2489.37 Kgs as 1.34 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 22.

tained / utilized in the export item at SI.No.2 and its quantity may be allowed as 2489.37 Kgs as 1.34 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 22. Import item at SI No.21 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 1256.56 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 23. Import item at SI No.22 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 1926 Kgs as 1.043 Kgs/Kg content in the export item at SI.No.1. 24. Import item at SI No.23 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 1341.87 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 25. Import item at SI No.24 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 1874.01 Kgs as 1.07 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 26. Import item at SI No.25 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 1475.46 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 27.

ained / utilized in the export item at SI.No.6 and its quantity may be allowed as 1475.46 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 27. Import item at SI No.26 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 3108 Kgs as 1.036 Kgs/Kg content in the export item at SI.No.1. 28. Import item at SI No.27 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 1714.23 Kgs as 1.14 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 29. Import item at SI No.28 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 3094.19 Kgs as 1.67 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 30. Import item at SI No.29 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 392.66 Kgs as 1.30 Kgs/Kg content in the export item at SI.No.12 after taking 1/3rd recovery from the scrap. 31. Import items at SI No. 30 to 54 may be omitted as they are not imported by the firm.

Case No. 183 / NC/1/MEET/Nov/202526/13 UDIN00484460AM26

2 after taking 1/3rd recovery from the scrap. 31. Import items at SI No. 30 to 54 may be omitted as they are not imported by the firm.

Case No. 183 / NC/1/MEET/Nov/202526/13 UDIN00484460AM26

94 Case Status Case Approved Party Name ARCEDGES BUILDING (INDIA) LLP Meeting Number and Date HQ File Number HQRNORM APPLY 00001956AM26 RA File Number 08AX04000592 AM26 Licence No and Date 0811015531/08/07/2025 comments of Consultant (SKB) dated 21.11.2025, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY AND WASTAGE TO BE ALLOWED 1 FABRICATED STEEL STRUCTURE MADE OUT OF MS HR COILS

200.00 MTS MILD STEEL HOT ROLLED COILS OF THICKNESS RANGES FROM 15.9 MM TO 20.0 MM. WASTAGE @2% ON THE NET WEIGHT OF MILD STEEL HOT ROLLED COILS OF THICKNESS RANGES FROM 15.9 MM TO 20.0 MM IN THE EXPORT PRODUCT.

Case No. 184 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name FINEPAC STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002022AM26 RA File Number 31AX04000161 AM26 Licence No and Date 3111005070/11/07/2025 UDIN00484460AM26

ame FINEPAC STRUCTURES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002022AM26 RA File Number 31AX04000161 AM26 Licence No and Date 3111005070/11/07/2025 UDIN00484460AM26

95 comments of DPIIT dated 12.09.2025, as under:

Net weight of export items at SI.No 1 to 22 may be specified as under: 1.

SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) SI.No. Net Weight (Kgs) 1 498.07 7 55.21 13 603.72 19 3172.4 2 208.3 8 115.07 14 568.1 20 594.8 3 40.83 9 1287.6 15 364.98 21 621.52 4 238.7 10 502 16 225.67 22 502.2 5 174.05 11 981.89 17 281.48 6 176.53 12 727.29 18 294.78

Quantity of import items at Sl.No. 5, 6, 12, 13, 18, 19, 24, 25, 27 to 32, 34 to 39, 41 to 44, 47 to 52, 55 to 60, 63 to 68, 71 to 76, 79, 80, 83, 84, 87, 88, 90 to 94, 96 to 100, 102 to 106, 108 to 112, 117 to 125, 130 to 133, 139 , 140 & 143 to 148 may be allowed on net to net basis with accountability clause. 3.Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 321.66 Kgs as 1.21 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap.
Import item at SI No.2 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 46.66 Kgs as 1.55 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap.

contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 46.66 Kgs as 1.55 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 5. Import item at SI No.3 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 120 Kgs as 1.50 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 6. Import item at SI No.4 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 36.66 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

96 7. Import item at SI No.7 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 121.66 Kgs as 1.43 Kgs/Kg content in the export item at SI.No.1 after taking 1/3rd recovery from the scrap. 8. Import item at SI No.8 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 146.33 Kgs as 1.47 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 9. Import item at SI No.9 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 38.33 Kgs as 1.53 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 10.

ntained / utilized in the export item at SI.No.2 and its quantity may be allowed as 38.33 Kgs as 1.53 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 10. Import item at SI No.10 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 46.66 Kgs as 1.55 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 11. Import item at SI No.11 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 36.66 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.2 after taking 1/3rd recovery from the scrap. 12. Import item at SI No.14 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 26.66 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 13.Import item at SI No.15 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 8.33 Kgs as 1.66 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 14. Import item at SI No.16 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 9.33 Kgs as 1.55 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 15.

ontained / utilized in the export item at SI.No.3 and its quantity may be allowed as 9.33 Kgs as 1.55 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 15. Import item at SI No.17 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 5 Kgs as 1.66 Kgs/Kg content in the export item at SI.No.3 after taking 1/3rd recovery from the scrap. 16. Import item at SI No.20 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 198.33 Kgs as 1.27 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 17. Import item at SI No.21 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 73.33 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 18. Import item at SI No.22 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 19 Kgs as 1.26 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 19. Import item at SI No.23 shall be of relevant grade and thickness as contained / utilized in the export UDIN00484460AM26

he export item at SI.No.4 after taking 1/3rd recovery from the scrap. 19. Import item at SI No.23 shall be of relevant grade and thickness as contained / utilized in the export UDIN00484460AM26

97 item at SI.No.4 and its quantity may be allowed as 13.66 Kgs as 1.95 Kgs/Kg content in the export item at SI.No.4 after taking 1/3rd recovery from the scrap. 20. Import item at SI No.26 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 212.33 Kgs as 1.27 Kgs/Kg content in the export item at SI.No.5 after taking 1/3rd recovery from the scrap. 21. Import item at SI No.33 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 209.66 Kgs as 1.24 Kgs/Kg content in the export item at SI.No.6 after taking 1/3rd recovery from the scrap. 22. Import item at SI No.40 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 76.33 Kgs as 1.49 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 23.

ntained / utilized in the export item at SI.No.7 and its quantity may be allowed as 76.33 Kgs as 1.49 Kgs/Kg content in the export item at SI.No.7 after taking 1/3rd recovery from the scrap. 23. Import item at SI No.45 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 75.66 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 24.Import item at SI No.46 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 67 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.8 after taking 1/3rd recovery from the scrap. 25. Import item at SI No.53 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 1121.33 Kgs as 1.36 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 26. Import item at SI No.54 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 398.33 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.9 after taking 1/3rd recovery from the scrap. 27. Import item at SI No.61 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 442.83 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 28.

ned / utilized in the export item at SI.No.10 and its quantity may be allowed as 442.83 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 28. Import item at SI No.62 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 152.66 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.10 after taking 1/3rd recovery from the scrap. 29. Import item at SI No.69 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 838 Kgs as 1.33 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 30. Import item at SI No.70 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 296.6 Kgs as 1.05 Kgs/Kg content in the export item at SI.No.11 after taking 1/3rd recovery from the scrap. 31. Import item at SI No.77 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 665 Kgs as 1.43 Kgs/Kg content in the export item at UDIN00484460AM26

be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 665 Kgs as 1.43 Kgs/Kg content in the export item at UDIN00484460AM26

98 SI.No.12 after taking 1/3rd recovery from the scrap. 32. Import item at SI No.78 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 306.66 Kgs as 1.17 Kgs/Kg content in the export item at SI.No.12 after taking 1/3rd recovery from the scrap. 33. Import item at SI No.81 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 490 Kgs as 1.44 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 34. Import item at SI No.82 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 263.66 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.13 after taking 1/3rd recovery from the scrap. 35. Import item at SI No.85 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 495 Kgs as 1.43 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 36.

tained / utilized in the export item at SI.No.14 and its quantity may be allowed as 495 Kgs as 1.43 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 36. Import item at SI No.86 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 261 Kgs as 1.18 Kgs/Kg content in the export item at SI.No.14 after taking 1/3rd recovery from the scrap. 37. Import item at SI No.89 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.15 and its quantity may be allowed as 103 Kgs as 1.30 Kgs/Kg content in the export item at SI.No.15 after taking 1/3rd recovery from the scrap. 38. Import item at SI No.95 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 8.33 Kgs as 1.66 Kgs/Kg content in the export item at SI.No.16 after taking 1/3rd recovery from the scrap. 39. Import item at SI No.101 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 92.33 Kgs as 1.42 Kgs/Kg content in the export item at SI.No.17 after taking 1/3rd recovery from the scrap. 40. Import item at SI No.107 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 112.66 Kgs as 1.44 Kgs/Kg content in the export item at SI.No.18 after taking 1/3rd recovery from the scrap. 41.

ned / utilized in the export item at SI.No.18 and its quantity may be allowed as 112.66 Kgs as 1.44 Kgs/Kg content in the export item at SI.No.18 after taking 1/3rd recovery from the scrap. 41. Import item at SI No.113 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 1983.33 Kgs as 1.16 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 42. Import item at SI No.114 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 1210 Kgs as 1.07 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 43. Import item at SI No.115 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 19.66 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

ed in the export item at SI.No.19 and its quantity may be allowed as 19.66 Kgs as 1.31 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. UDIN00484460AM26

99 44. Import item at SI No.116 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 8.33 Kgs as 1.19 Kgs/Kg content in the export item at SI.No.19 after taking 1/3rd recovery from the scrap. 45. Import item at SI No.126 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.20 and its quantity may be allowed as 347.33 Kgs as 1.18 Kgs/Kg content in the export item at SI.No.20 after taking 1/3rd recovery from the scrap. 46. Import item at SI No.127 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.20 and its quantity may be allowed as 93 Kgs as 3.44 Kgs/Kg content in the export item at SI.No.20 after taking 1/3rd recovery from the scrap. 47. Import item at SI No.134 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 556.66 Kgs as 1.35 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 48. Import item at SI No.135 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 30 Kgs as 1.5 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 49.

contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 30 Kgs as 1.5 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 49. Import item at SI No.136 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 45.66 Kgs as 1.57 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 50. Import item at SI No.137 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 91.66 Kgs as 1.22 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 51. Import item at SI No.138 shall be of relevant grade and diameter as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 105 Kgs as 1.4 Kgs/Kg content in the export item at SI.No.21 after taking 1/3rd recovery from the scrap. 52. Import item at SI No.141 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 442.83 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.22 after taking 1/3rd recovery from the scrap. 53. Import item at SI No.141 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 442.83 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.22 after taking 1/3rd recovery from the scrap. 54.

ned / utilized in the export item at SI.No.22 and its quantity may be allowed as 442.83 Kgs as 1.37 Kgs/Kg content in the export item at SI.No.22 after taking 1/3rd recovery from the scrap. 54. Import item at SI No.142 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 152.66 Kgs as 1.04 Kgs/Kg content in the export item at SI.No.22 after taking 1/3rd recovery from the scrap.

Case No. 185 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name SARA SAE PRIVATE LIMITED UDIN00484460AM26

100 Meeting Number and Date HQ File Number HQRNORM APPLY 00002153AM26 RA File Number 05AX04001271 AM26 Licence No and Date 0511033929/17/07/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 3000 PSI WP (OIL FIELD EQUIPMENT) QUANTITY: 2 NOS ITEMS OF IMPORTS: Item No 1 to 44: Net to net under GN-4 with accountability clause. WASTAGE TO BE ALLOWED: NIL. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

Case No. 186 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002155AM26 RA File Number 05AX04001293 AM26 Licence No and Date 0511033931/17/07/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 3000 PSI WP WITH ACCESSORIES (OIL FIELD EQUIPMENTS). QUANTITY: 1 NOS UDIN00484460AM26

omments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 3000 PSI WP WITH ACCESSORIES (OIL FIELD EQUIPMENTS). QUANTITY: 1 NOS UDIN00484460AM26

101 ITEMS OF IMPORTS: Item No 1 to 134: Net to net under GN-4 with accountability clause. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

Case No. 187 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002179AM26 RA File Number 09AX04000408 AM26 Licence No and Date 0911010059/18/07/2025 comments of MHI dated 19.11.2025, as under:

Export item: TURBINE PARTS (Vanes made from Stainless Steel Bar) – 124 Numbers, total net wt. 165 Kg Import item: STAINLESS STEEL BARS GRADE: STT17/13W 120X60, 122X44

Wastage allowed on import item: 580.58 % wastage on net content basis after recovery as against 950.99% applied for.

Case No. 188 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002208AM26 RA File Number 05AX04001358 AM26 Licence No and Date 0511033992/21/07/2025 UDIN00484460AM26

3 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002208AM26 RA File Number 05AX04001358 AM26 Licence No and Date 0511033992/21/07/2025 UDIN00484460AM26

102 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 5000 PSI WP(OIL FIELD EQUIPMENT) QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 137: Net to net under GN-4 with accountability clause. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

Case No. 189 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HFCL LIMITED HQ File Number HQRNORM APPLY 00002381AM26 RA File Number 05AX04001501 AM26 Licence No and Date 0511034167/29/07/2025 comments of Meity dated 11.12.2025, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 2587.00 SINGLE MODE OPTICAL FIBER

1,26,659.52 KME 2587.00 CO POLYMER COATED MS TAPE

1,17,725.06 KGS MEDIUM

48F ARMOURED OPTICAL FIBER CABLE 2587.00 KME KGS UDIN00484460AM26

1,26,659.52 KME 2587.00 CO POLYMER COATED MS TAPE

1,17,725.06 KGS MEDIUM

48F ARMOURED OPTICAL FIBER CABLE 2587.00 KME KGS UDIN00484460AM26

103 DENSITY POLYETHYLENE (MDPE) 1,45,075.73 1305.00 SINGLE MODE OPTICAL FIBER

1,27,785.60 KME 1305.00 CO POLYMER COATED MS TAPE

68,173.07 KGS

96F ARMOURED OPTICAL FIBER CABLE 1305.00 KME MEDIUM DENSITY POLYETHYLENE (MDPE)

86,971.59 KGS 1615.00 SINGLE MODE OPTICAL FIBER

2,37,211.20 KME 1615.00 CO POLYMER COATED MS TAPE

73,509.07 KGS

144F ARMOURED OPTICAL FIBER CABLE 1615.00 KME MEDIUM DENSITY POLYETHYLENE (MDPE)

1,42,432.26 KGS

Case No. 190 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HFCL LIMITED HQ File Number HQRNORM APPLY 00002382AM26 RA File Number 05AX04001502 AM26 Licence No and Date 0511034168/29/07/2025 UDIN00484460AM26

/Nov/202526/13 Case Status Case Approved Party Name HFCL LIMITED HQ File Number HQRNORM APPLY 00002382AM26 RA File Number 05AX04001502 AM26 Licence No and Date 0511034168/29/07/2025 UDIN00484460AM26

104 comments of Meity dated 11.12.2025, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1110.00 SINGLE MODE OPTICAL FIBER

54,345.60 KME 1110.00 CO POLYMER COATED MS TAPE

50,512.10 KGS

48F ARMOURED OPTICAL FIBER CABLE 1110.00 KME MEDIUM DENSITY POLYETHYLENE (MDPE)

62,247.41 KGS 560.00 SINGLE MODE OPTICAL FIBER

54,835.20 KME 560.00 CO POLYMER COATED MS TAPE

29,254.34 KGS

96F ARMOURED OPTICAL FIBER CABLE 560.00 KME MEDIUM DENSITY POLYETHYLENE (MDPE)

37,321.14 KGS 690.00 SINGLE MODE OPTICAL FIBER

1,01,347.20 KME 690.00 CO POLYMER COATED MS TAPE

31,406.35 KGS MEDIUM DENSITY POLYETHYLENE

144F ARMOURED OPTICAL FIBER CABLE 690.00 KME

60,853.41 KGS UDIN00484460AM26

OATED MS TAPE

31,406.35 KGS MEDIUM DENSITY POLYETHYLENE

144F ARMOURED OPTICAL FIBER CABLE 690.00 KME

60,853.41 KGS UDIN00484460AM26

105 (MDPE)

Case No. 191 / NC/1/MEET/Nov/202526/13 Case Status Case Rejected Party Name CAVOTEC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002399AM26 RA File Number 31AX04000175 AM26 Licence No and Date 3111005128/30/07/2025 The committee considered the case as per agenda and noted that a deficiency letter issued on 10.09.2025

Case No. 192 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002438AM26 RA File Number 09AX04000440 AM26 Licence No and Date 0911010151/01/08/2025 comments of MHI dated 19.11.2025, as under:

Export item: OIL AND GAS DRILLING EQUIPMENT– 200 Numbers Import item: FORGED AND MACHINE RINGS UDIN00484460AM26

106

Wastage allowed on import item: 97.16 % wastage on net content basis after recovery as against 102.27% applied for.

Note: Material composition of export product and import item should be same.

Wastage allowed on import item: 97.16 % wastage on net content basis after recovery as against 102.27% applied for.

Note: Material composition of export product and import item should be same. Dimensions of export product and import item should not be same.

Case No. 193 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name DOOWON AUTOMOTIVE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002641AM26 RA File Number 04AX04000480 AM26 Licence No and Date 0411010170/12/08/2025 The Committee considered the case as per agenda and taking cue from earlier approval in firm’s similar case, decided to ratify the ad-hoc norms as per comments of MHI dated 15.12.2025, as under:

Aluminium alloy foils may be allowed with 1% wastage on net content basis. i. Brazing flux and AL paste may be allowed as consumables with their total value up to 0.75% of fob value of respective export product or as applied for, whichever is less. ii. Other items may be allowed on net-to-net basis under GN-4. iii.

Case No. 194 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name TEMA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002749AM26 RA File Number 03AX04002487 AM26 Licence No and Date 0311046626/19/08/2025 UDIN00484460AM26

Party Name TEMA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002749AM26 RA File Number 03AX04002487 AM26 Licence No and Date 0311046626/19/08/2025 UDIN00484460AM26

107

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 195 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002830AM26 RA File Number 31AX04000227 AM26 Licence No and Date 3111005201/22/08/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1.

002830AM26 RA File Number 31AX04000227 AM26 Licence No and Date 3111005201/22/08/2025

108 proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. The above information may be furnished export product wise. 5.

erials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. The above information may be furnished export product wise. 5.

Case No. 196 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003147AM26 RA File Number 09AX04000615 AM26 Licence No and Date 0911010440/11/09/2025

Case No. 197 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003252AM26 RA File Number 05AX04002063 AM26 Licence No and Date 0511035159/16/09/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT
SARA SAE ASSY TRIPLEX PUMP MODULE 14 GPM 5000PSI, (OIL FIELD EQUIPMENT). QTY: 1 NOS ITEMS OF IMPORTS: ITEM NO. 1 TO 3: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1. 2. UDIN00484460AM26

109 QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

Case No. 198 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AUSA MEDICAL DEVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003309AM26 RA File Number 07AX04001065 AM26 Licence No and Date 0711015654/18/09/2025

MFG PROCESS IN DETAIL 1.

JUSTIFICATION FOR 7 % WASTAGE 2.

WASTAGE AT EACH STAGE OF MFG 3.

RNORM APPLY 00003309AM26 RA File Number 07AX04001065 AM26 Licence No and Date 0711015654/18/09/2025

MFG PROCESS IN DETAIL 1.

JUSTIFICATION FOR 7 % WASTAGE 2.

WASTAGE AT EACH STAGE OF MFG 3.

Case No. 199 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00003338AM26 RA File Number 09AX04000637 AM26 Licence No and Date 0911010509/19/09/2025 comments of MHI dated 09.12.2025, as under:

Taking cue from NC-1 earlier decisions in firm’s similar cases UDIN00484460AM26

110 A) Export Products Import item S. No. Description Qty. in Nos. Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery 1 TURBINE PARTS (Made from BLADE MATERIAL(STAINLESS STEEL BARS) GRADE: 10705BA ) 336 772.80 Stainless steel Bar, GRADE: 10705BA, SIZE: 135X178, 118X146, 118X175, 55X90 MM 1000.14%

745.18%

2 TURBINE PARTS (Made from BLADE MATERIAL(STAINLESS STEEL BARS) GRADE: 10705BA-J ) 364 910.00 Stainless steel Bar, GRADE: 10705BA-J, SIZE: 118X146, 135X178, MM 1049.70%

780.07%

3 TURBINE PARTS (Made from BLADE MATERIAL(STAINLESS STEEL BARS) GRADE: 10705BA-ST ) 1164 1501.56 Stainless steel Bar, GRADE: 10705BA-ST, SIZE: 40X68, 55X90, 67X123, 61X106, 33X52, 47X75 MM 678.91%

476.36%

Stainless steel Bar, GRADE: 10705BU, SIZE: 56X202, 54X181, 42X167, 40X154, 36X283, 36X245, 42X281, 33X265, 30X239, 27X211, 4 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BU) 3137 2227.27 942.29%

706.97%

UDIN00484460AM26

X202, 54X181, 42X167, 40X154, 36X283, 36X245, 42X281, 33X265, 30X239, 27X211, 4 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705BU) 3137 2227.27 942.29%

706.97%

UDIN00484460AM26

111 48X281, 43X71, 55X90, 33X52, 40X62, 47X75, 41X49, 33X47, 41X49, MM 5 TURBINE PARTS (Made from Stainless steel Bar, Grade: 10705MBU) 3834 2377.08 Stainless steel Bar, GRADE: 10705MBU, SIZE: 67X146, 58X122, 49X73, 56X106, 45X100, 41X89, 40X68, 46X85, 33X52, 55X90,40X62, 40X52 MM 916.03%

617.96%

6 TURBINE PARTS (Made from Stainless steel Bar, Grade: MTB10AAM) 1762 1057.20 Stainless steel Bar, GRADE: MTB10AAM, SIZE: 61X110, 55X90, 33X52, 40X68, 47X75 MM 716.47%

485.98%

B) COOLANT OIL (IPOL CUT 150 T (CNC/V MC)) may be allowed up to 5% of fob value of export.

Case No. 200 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003342AM26 RA File Number 05AX04001998 AM26 Licence No and Date 0511035259/19/09/2025 comments of Consultant (SKB) dated 14.11.2025, as under: UDIN00484460AM26

Date HQ File Number HQRNORM APPLY 00003342AM26 RA File Number 05AX04001998 AM26 Licence No and Date 0511035259/19/09/2025 comments of Consultant (SKB) dated 14.11.2025, as under: UDIN00484460AM26

112

ITEM OF EXPORT
SARA SAE BOP CONTROL UNIT 40 GAL RATED FOR 3000PSI WP. (OIL FIELD EQUIPMENT). QTY: 1 NOS ITEMS OF IMPORTS: ITEM NO. 1 TO 134: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1. 2. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

Case No. 201 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003370AM26 RA File Number 05AX04002109 AM26 Licence No and Date 0511035304/22/09/2025 comments of Consultant (SKB) dated 21.11.2025, as under:

SL NO EXPORT ITEM QUANTITY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED 1 PARTS CONSISTING OF PRE- FABRICATED PIPINGS FOR CHEMICAL STORAGE PLANT(PARTS CONSISTING OF PRE-FABRICATED PIPINGS FOR CHEMICAL STORAGE PLANT)

1.0 MTS STAINLESS STEEL SEAMLESS PIPES SA / A 312, SA/A 240 TP 304 TO 347,TP 304 L TO TP 347 L,DUAL GRADE - TP 304 / 304 L TO TP 347 / 347 L, TP304H TO 347H 1.02 KGS/KGS ON THE NET WEIGHT OF CARBON STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

NOTE: THE GRADES AND SIZES OF THE IMPORTED PIPES SHOULD BE MATCHED WITH THE UDIN00484460AM26

TO 347H 1.02 KGS/KGS ON THE NET WEIGHT OF CARBON STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

NOTE: THE GRADES AND SIZES OF THE IMPORTED PIPES SHOULD BE MATCHED WITH THE UDIN00484460AM26

113 GRADES AND SIZES OF PIPES IN THE EXPORT PRODUCT.

Case No. 202 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003373AM26 RA File Number 05AX04002001 AM26 Licence No and Date 0511035308/22/09/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT
SARA SAE BOP CONTROL UNIT 40 GAL RATED FOR 3000PSI WP (OIL FIELD EQUIPMENT). QTY: 1 NOS

ITEMS OF IMPORTS: ITEM NO. 1 TO 134: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1. 2. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

Case No. 203 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name CONCORD UNITED PRODUCTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003423AM26 RA File Number 07AX04001093 AM26 Licence No and Date 0711015728/25/09/2025 UDIN00484460AM26

ONCORD UNITED PRODUCTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003423AM26 RA File Number 07AX04001093 AM26 Licence No and Date 0711015728/25/09/2025 UDIN00484460AM26

114

DRAWINGS OF THE EXPORT PRODUCTS WITH COMPLETE DIMENSIONS. 1. THICKNESS WISE QUANTITY IN NUMBERS OF THE EXPORT PRODUCT. 2. PROCESS FLOW CHART AND WASTAGE AT EACH STAGE OF OPERATION. 3. WHERE IS THE APPLICATION OF THE EXPORT PRODUCTS? 4. MILL TEST CERTIFICATE OF THE IMPORTED STEEL. 5.

Case No. 204 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003429AM26 RA File Number 05AX04002044 AM26 Licence No and Date 0511035360/26/09/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT SARA SAE BOP CONTROL UNIT 200 GAL RATED FOR 3000 PSI WP (FOR OIL FIELD EQUIPMENT). QTY: 1 NOS 1. 1"100FT 5K PSI FIRE RETARDANT HOSE (FOR OIL FIELD EQUIPMENT). QTY: 12 NOS 2. ITEMS OF IMPORTS: ITEM NO. 1 TO 140: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1. ITEM NO 141: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 2. 3. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 4.

UDIN00484460AM26

ACCOUNTABILITY CLAUSE. 1. ITEM NO 141: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 2. 3. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 4.

UDIN00484460AM26

115

Case No. 205 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003498AM26 RA File Number 05AX04002285 AM26 Licence No and Date 0511035442/01/10/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: ACCUMULATOR ASSY., TOP LOADING 3000 PSI 11 GAL (FOR OIL FIELD EQUIPMENT). ITEMS OF IMPORTS: ITEM NO. 1 TO 7: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1. 2. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

Case No. 206 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003515AM26 RA File Number 09AX04000702 AM26 Licence No and Date 0911010602/03/10/2025 comments of MHI dated 24.11.2025, as under:

Export item: TURBINE PARTS (Made from Stainless Steel Bar) - 4197 Numbers Import item: BLADE MATERIAL (STAINLESS STEEL BARS) UDIN00484460AM26

03/10/2025 comments of MHI dated 24.11.2025, as under:

Export item: TURBINE PARTS (Made from Stainless Steel Bar) - 4197 Numbers Import item: BLADE MATERIAL (STAINLESS STEEL BARS) UDIN00484460AM26

116

Wastage allowed on import items:

i) Blade Material (S S Bars) may be allowed with 800.67 % wastage on net content basis after recovery as against 1162.82% applied for. ii) Coolant may be allowed as consumables up to 5% of fob value of export.

Case No. 207 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name ABI-SHOWATECH (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003544AM26 RA File Number 04AX04000697 AM26 Licence No and Date 0411010512/06/10/2025

SUBMIT COLOURED PHOTOGRAPH OF THE EXPORT PRODUCTS. 1. WHAT IS THE NET WEIGHT OF THE EXPORT PRODUCT AT Sl No 1 & 2? 2. CHEMICAL COMPOSITION OF THE EXPORT PRODUCT. 3. WHAT ARE THE REASONS FOR THE VARIATION OF WASTAGE FROM 1 TO 50%? SUBMIT DETAILED JUSTIFICATION. 4. WHERE IS THE APPLICATION OF WHEELS? 5. SUBMIT CALCULATION OF THE NET CONTENT OF ALUMINIUM IN THE EXPORT PRODUCT. 6.

Case No. 208 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name DELLNER (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003603AM26 RA File Number 04AX04000721 AM26 Licence No and 0411010533/07/10/2025 UDIN00484460AM26

Party Name DELLNER (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003603AM26 RA File Number 04AX04000721 AM26 Licence No and 0411010533/07/10/2025 UDIN00484460AM26

117 Date

Submit a coloured photograph of the export product with dimensions of the raw material and finished item.
Detailed process of manufacturing.
Process flow chart and indicate the wastage at each stage of operation.
What is the net length in meters that will be used in the export product, and the initial length in meters of the raw material?
What is the width and thickness of the imported item?
What is the weight of the raw material in GSM?
What is the application of the export item?

Case No. 209 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name CRAFTSMAN AUTOMATION LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003674AM26 RA File Number 32AX04000467 AM26 Licence No and Date 3211009906/10/10/2025

Case No. 210 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AEROSKY SYSTEM PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003677AM26 RA File Number 07AX04001184 AM26 Licence No and Date 0711015889/10/10/2025

UDIN00484460AM26

Name AEROSKY SYSTEM PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003677AM26 RA File Number 07AX04001184 AM26 Licence No and Date 0711015889/10/10/2025

UDIN00484460AM26

118

Submit a coloured photograph of the export product with complete dimensions.
Process flow chart and indicate the wastage at each stage of operation.
What is the weight of the raw material at the initial stage and at the final stage of the finished product?
What is the application of the export item?
Submit the Mill Test Certificate of the imported item.
What is the total weight of the 8 Nos of export products?
What are the reasons for 83.09% wastage in the manufacturing of the export product? Submit a detailed process and justify the claimed wastage for the manufacturing of the export item.

Case No. 211 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003705AM26 RA File Number 09AX04000740 AM26 Licence No and Date 0911010650/13/10/2025

Case No. 212 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HFCL LIMITED HQ File Number HQRNORM APPLY 00003742AM26 RA File Number 05AX04002505 AM26 Licence No and Date 0511035756/15/10/2025 comments of Meity dated 11.12.2025, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 864F UNARMOURED SINGLE MODE

150.00 KME

1,32,192.00 KME UDIN00484460AM26

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 864F UNARMOURED SINGLE MODE

150.00 KME

1,32,192.00 KME UDIN00484460AM26

119 OPTICAL FIBER CABLE OPTICAL FIBER

1728F
UNARMOURED OPTICAL FIBER CABLE 48.00 KME SINGLE MODE OPTICAL FIBER

84,602.88 KME

Case No. 213 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name HFCL LIMITED HQ File Number HQRNORM APPLY 00003743AM26 RA File Number 05AX04002506 AM26 Licence No and Date 0511035757/15/10/2025 comments of Meity dated 11.12.2025, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM

72F UNARMOURED OPTICAL FIBER CABLE 557.00 KME SINGLE MODE OPTICAL FIBER

40,906.08 KME

144F UNARMOURED OPTICAL FIBER CABLE 425.00 KME SINGLE MODE OPTICAL FIBER

62,424.00 KME SINGLE MODE OPTICAL

432F UNARMOUR ED OPTICAL FIBER CABLE 30.00 KME

13,219.20 KME UDIN00484460AM26

MODE OPTICAL FIBER

62,424.00 KME SINGLE MODE OPTICAL

432F UNARMOUR ED OPTICAL FIBER CABLE 30.00 KME

13,219.20 KME UDIN00484460AM26

120 FIBER

864F UNARMOURED OPTICAL FIBER CABLE 120 KME SINGLE MODE OPTICAL FIBER

1,05,753.60 KME

Case No. 214 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003745AM26 RA File Number 09AX04000741 AM26 Licence No and Date 0911010674/15/10/2025 comments of MHI dated 12.12.2025, as under:

Export Product Import item Description Qty. in Nos. Net Wt. (Kg) Description % wastage claimed % wastage on net content basis to be allowed after recovery OIL AND GAS DRILLING EQUIPMENT(Made from Stain less Steel Round Bar, Grade: NTR 50HS ) 26 780 Stain less Steel Round Bar Grade: NTR 50HS 33.33%

31.67%

UDIN00484460AM26

121

Case No. 215 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003768AM26 RA File Number 05AX04002499 AM26 Licence No and Date 0511035794/15/10/2025 comments of Consultant (SKB) dated 14.11.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 3000 PSI WP AND SHEAR BOOST SYSTEM FOR 5000 PSI (FOR OIL FIELD EQUIPMENT).

ITEMS OF IMPORTS:

Item No 1 to 196: Net to net under GN-4 with accountability clause. 1. 2. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

R OIL FIELD EQUIPMENT).

ITEMS OF IMPORTS:

Item No 1 to 196: Net to net under GN-4 with accountability clause. 1. 2. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 3.

Case No. 216 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name BALMER LAWRIE-VAN LEER LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003827AM26 RA File Number 07AX04001294 AM26 Licence No and Date 0711015946/17/10/2025 UDIN00484460AM26

122

Case No. 217 / NC/1/MEET/Nov/202526/13 Case Status Case Deferred Party Name AMBER ENTERPRISES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003843AM26 RA File Number 05AX04002580 AM26 Licence No and Date 0511035884/22/10/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Information about the inputs required per unit of the resultant product as per Sl. No. 1 of Appendix- 11A appearing in current HBP (Vol.I) separately for each product. 4.

, may also be indicated. 3. Information about the inputs required per unit of the resultant product as per Sl. No. 1 of Appendix- 11A appearing in current HBP (Vol.I) separately for each product. 4. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 5. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables. 6. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 7. The above information may be furnished export product wise. 8.

Case No. 218 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number HQRNORM APPLY 00003844AM26 RA File Number 05AX04002583 AM26 Licence No and Date 0511035885/22/10/2025 UDIN00484460AM26

ting Number and Date NC/ 1/ MEET/ Nov/ 202526/ 13 and 16/12/2025 HQ File Number HQRNORM APPLY 00003844AM26 RA File Number 05AX04002583 AM26 Licence No and Date 0511035885/22/10/2025 UDIN00484460AM26

123 comments of Consultant (SKB) dated 21.11.2025, as under: SL NO EXPORT ITEM QUANTITY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED CARBON STEEL SEAMLESS PIPE(SA/ A 106 GR B &C , API 5 L GR. X 42 / X 52/ X 55/ X 65, SA/ A 53 GR B, SA / A 333 GR 6, APL 5L GRADE B) 1.02 KGS/KGS ON THE NET WEIGHT OF CARBON STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT. 1 PARTS CONSISTING OF PRE-FABRICATED PIPINGS FOR CHEMICAL STORAGE PLANT (PARTS CONSISTING OF PRE- FABRICATED PIPINGS FOR CHEMICAL STORAGE PLANT)

360.00 MTS CARBON STEEL WELDED PIPE(SA / A 672 B 60 CL 12 / CL 22 ,SA / A 134 GR. A 283 D. S.A.W, APL 5L GRADE B,SA / A 672 B 70 CL 12 / CL 22 / SA/A 671 GR. CC60, CL32 / SA/A 333 GR. 6) 1.02 KGS/KGS ON THE NET WEIGHT OF CARBON STEEL WELDED PIPES IN THE EXPORT PRODUCT.

ALLOY STEEL SEAMLESS PIPES UPTO 114.3 MM(SA/ A 335 GRADE P2 TO P92 / WP2 TO WP92, SA/A 691 GR. 1-1/4 CR., CL 22) 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

ALLOY STEEL SEAMLESS PIPES ABOVE 114.3 MM AND UPTO 219.1 MM (SA/ A 335 GRADE P2 TO P92 / WP2 TO WP92, SA/A 691 GR. 1-1/4 CR., CL 22) 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

ALLOY STEEL SEAMLESS PIPES ABOVE 219.1 MM (SA/ A 335 GRADE P2 TO P92 / WP2 TO WP92, SA/A 691 GR.

CL 22) 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

ALLOY STEEL SEAMLESS PIPES ABOVE 219.1 MM (SA/ A 335 GRADE P2 TO P92 / WP2 TO WP92, SA/A 691 GR. 1-1/4 CR., CL 22) 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT.

ALLOY STEEL WELDED PIPES (SA/A 691 GR. 1-1/4 CR., CL 22) 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL WELDEDPIPES IN THE EXPORT PRODUCT. STAINLESS STEEL 1.02 KGS/KGS ON THE NET

UDIN00484460AM26

124 SEAMLESS PIPES (SA/A 312 GR. TP304/304L TO TO 347/347L, TO 304 TO 347, TP304L TO TP347L, SA/A 312 GR. TP321H, SA/A 358 GR. TP321H, SA/A 790 GR. UNS S31803) WEIGHT OF STAINLESS- STEELSEAMLESSPIPES IN THE EXPORT PRODUCT.

STAINLESS STEEL WELDED PIPES(SA/A 312 & SA/A 358 TP 304 TO 347 ,TPTP 304 L TO TP 347 L,DUAL GRADE - TP 304 / 304 L TO TP 347 / 347 L / TP 304 H TO TP 347H) 1.02 KGS/KGS ON THE NET WEIGHT OF STAINLESS- STEELWELDEDPIPES IN THE EXPORT PRODUCT.

FLANGES CARBON STEEL(SA / A 105, SA/ A 350 LF 2 (LTCS),SA/ A 350 LF 2 (LTCS), SA/ A 350 LF 2 CL1 (LTCS)) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

FLANGES ALLOY STEEL(SA/A 182 GR F 1 TO F 92, SA/A 182 GR. F11, CL2) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

FLANGES STAINLESS STEEL(SA/A 182 GR F 304 TO F 347, SA/A 182 GR.

FLANGES ALLOY STEEL(SA/A 182 GR F 1 TO F 92, SA/A 182 GR. F11, CL2) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

FLANGES STAINLESS STEEL(SA/A 182 GR F 304 TO F 347, SA/A 182 GR. F321H, SA/A 182 F 304 L TO 347 L ,DUAL GRADE - F 304 / 304 L TO F 347 / 347 L) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

PIPE FITTING CARBON STEEL(SA/A 234 WPB / WPC,SA/ A 420 WP L 6, SA/A 350 GR. LF2, SA/A 350 GR. LF2,CL1 , SA/A 420 GR. WPL6, SA/A 420 GR. WPL6,W, SA/A 671 GR. CC60, CL32, REDUCERS / ELBOW / END CAPS/ TEE / TEE/ COUPLING / SOCKOLET/ CAP / WELDOLET / Y PIECE / MEGALET & ALL TYPES OF VARIANTS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE UDIN00484460AM26

125

PIPE FITTING ALLOY STEEL(SA/A 691 GR. 1-1/4 CR., CL 22, SA/A 182 GR. F11, CL2, SA/A 182 GR. F11, / SA/A 182 / SA 234 GRADE WP1 TO WP92, P 1 TO P92 , F1 TO F92, REDUCERS / ELBOW / END CAPS/ TEE / TEE/ CAP/ COUPLING / SOCKOLET/ WELDOLET / Y PIECE / MEGALET & ALL TYPES OF VARIANTS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

: PIPE FITTING STAINLESS STEEL(SA/A 403 WP 304 TO WP 347, SA/A 403 GR. WP321H,SA/A 182 GR. F321H,SA/A 403 GR. WP321H,WX, SA/A 182 GR. F304/304L, SA/A 403 WP 304 L TO WP 347 L , DUAL GRADE - SA/A 403, WP 304 / 304 L TO WP 347 / 347 L , REDUCERS / ELBOW / END CAPS/ TEE / TEE/ COUPLING / SOCKOLET/ CAP/ WELDOLET / Y PIECE / MEGALET & ALL TYPES OF VARIANTS, SA/A 815 GR. WP UNS S31803 & SA/A 815 GR.

/ 304 L TO WP 347 / 347 L , REDUCERS / ELBOW / END CAPS/ TEE / TEE/ COUPLING / SOCKOLET/ CAP/ WELDOLET / Y PIECE / MEGALET & ALL TYPES OF VARIANTS, SA/A 815 GR. WP UNS S31803 & SA/A 815 GR. WP UNS S32205) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

NOTE: THE GRADES AND SIZES OF THE IMPORTED PIPES SHOULD BE MATCHED WITH THE GRADES AND SIZES OF PIPES IN THE EXPORT PRODUCT.

Case No. 219 / NC/1/MEET/Nov/202526/13 Case Status Case Approved Party Name CHEMTRON SCIENCE LABORATORIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003895AM26 RA File Number 03AX04003737 AM26 Licence No and Date 0311048446/24/10/2025 UDIN00484460AM26

126 comments of DPIIT dated 14.11.2025, as under:

Quantity of import items at SI.No.1 to 192 is "NIL" and therefore, import items at SI.No.1 to 192 may be omitted.
1. Quantity of of import items may be allowed as under: 2. For export item at Sl.No.1 :Quantity of import items at Sl. No. 193, 195,197 to 209 and 211 to 239
may be allowed on net to net basis with accountability clause and quantity of import items at Sl. No. 194,196 and 210 may be allowed as per policy for import of spares ,as per General Note-4 for engineering products. i. For export item at Sl.No.2:Quantity of import item s at Sl. No. 240, 242, 244 to 251 and 253 to 288 may be allowed on net to net basis with accountability clause and quantity of import items at Sl. No. 241,243 and 252 may be allowed as per policy for import of spares ,as per General Note-4 for engineering products. ii.

net basis with accountability clause and quantity of import items at Sl. No. 241,243 and 252 may be allowed as per policy for import of spares ,as per General Note-4 for engineering products. ii. For export item at Sl.No.3:Quantity of import item s at Sl. No. 289, 291, 293 to 299 and 301 to 335 may be allowed on net to net basis with accountability clause and quantity of import items at Sl. No. 290,292 and 300 may be allowed as per policy for import of spares ,as per General Note-4 for engineering products. iii. For export item at Sl.No.4 :Quantity of import item s at Sl. No. 336, 338, 340 to 352 and 354 to 383 may be allowed on net to net basis with accountability clause and quantity of import items at Sl. No. 337,339 and 353 may be allowed as per policy for import of spares ,as per General Note-4 for engineering products.
iv.

Offline Cases Case. No. 1 M. No.:NC/1/MEET/Dec/202526/8 (Offline Cases) dated 16.12.2025 M/s GEA Process Engineering, Vadodara Status of case HQ. No.: 01/80/162/AM09/

Subject: Request for fixation of ad-

hoc norms
Deferred Case history: The applicant has stated that they are a 100% Export Oriented Unit having letter of permission (LOP) No. KASEZ/100%EOU/II/08/09-10/11623 dated 23.11.2009 are the Member of EPC for EOUs and UDIN00484460AM26

127 KSEZs. The applicant has stated that the company is an EOU unit and it is registered with Kandla Special Economic Zone (KASEZ) and there is a requirement by KASEZ that EOU unit needs to fix the norms of its export product. The applicant vide their representation dated 11.01.2020 had requested for fixation of input/output Norms for the import/export products.

The copy of application was sent to MSME on 08.09.2020 for examination of the case. As per comments of MSME received via email dated 16.06.2021, a deficiency letter was sent to the applicant on 13.08.2021 for furnishing the following information:

A copy of complete set of application. 1. To provide MSME-DI wastage/SEZ wastage report, if any. 2.

As per NC decision, a deficiency letter as raised by MSME was issued to the applicant on 27.09.2021. The applicant via email dated 28.09.2021 informed that their unit is not registered under MSME Act, 2006. Therefore, they do not have any MSME-DI wastage report issued by MSME Authority and also such wastage report is not issued by KASEZ Authority. MSME was reminded on 09.03.2022 for expediting the comments.

ore, they do not have any MSME-DI wastage report issued by MSME Authority and also such wastage report is not issued by KASEZ Authority. MSME was reminded on 09.03.2022 for expediting the comments. As per comments of MSME given vide email dated 31.05.2022, the following information was asked to furnish from the applicant on 18.07.2022:

The applicant vide email dated 18.07.2022 had requested for more time to reply the deficiency letter. Further, the applicant’s reply was received vide email dated 22.07.2022 and the same was forwarded to MSME for examination & comments.

UDIN00484460AM26

ore time to reply the deficiency letter. Further, the applicant’s reply was received vide email dated 22.07.2022 and the same was forwarded to MSME for examination & comments.

UDIN00484460AM26

128 The case was considered in NC-1 meeting dt.24.04.2023 and the decision of the Committee was to wait for the report of the committee constituted for fixing of scrap wastage norms in respect of EOUs/SEZ units. Subsequently, a team consisting of DDG(SKD), Consultant (Tech-3) and Consultant (SKB) made a visit to the factory of the firm situated at Vadodara during 22-24 Feb, 2024. The report of the said team is still awaited as the firm has not furnished the following documents sought vide mail dated 29.08.2024:-

(i)  Copy of Application (ii) Other Annexures of the firm’s letter dated 21.03.2024 in addition to A, B & C Annexures.  

The case was again considered in NC-1 meeting dt.01.08.2025 and the decision of the Committee was as under:-

“The Committee considered the case as per agenda and noted that in this matter a CPGRAMS grievance bearing registration number DOCOM/E/2025/0001443 has also been received from Shri Yash Sah. The Committee, after deliberating upon the case, decided to remind the firm to submit documents called for vide mail dated 29.08.2024 and to dispose of the said grievance by issuing a reminder to the firm. “

Subsequently, vide mails dt.25.08.2025 and 09.12.2025, Shri Yash Sah and the firm were reminded to furnish the said documents. They have not yet submitted the said documents.

r to the firm. “

Subsequently, vide mails dt.25.08.2025 and 09.12.2025, Shri Yash Sah and the firm were reminded to furnish the said documents. They have not yet submitted the said documents. Now, Shri Yash Sah has filed CPGRAMS appeal bearing registration number DOCOM/E/A/25/0000106 against the said decision of NC-

The case is placed before NC-1 for consideration and taking appropriate decision in the matter.

Decision: The Committee considered the case as per agenda and decided to remind Shri Yash Sah and the firm to submit documents sought vide mail dated 29.08.2024.

Case No.2

M/s. GASTEK ENGINEERING PRIVATE LIMITED Status of case

Approved UDIN00484460AM26

129 M.No.: NC/1/MEET/Dec/202526/8 (Offline Cases) dated 16.12.2025 AA No. : 0510394420 dated 03/06/2015

Subject: Review application for

fixation of ad-hoc norms.

Case history: The application of the firm for fixation of ad-hoc norms was rejected in NC-1 meeting dated
21/06/2016 and the decision of the Committee was as under:- “The committee noted that the firm has not furnished documentary evidence in support of cost of indigenous inputs for consideration of the case in reply to the letter sent to them on 18.04.2016 by DGFT and final reminder on 20.05.2016 sent through email and decided to reject the case with direction to the firm to pay applicable custom duty with interest for EODC. RA may take further necessary action accordingly.” 2. Against the said rejection, the firm filed review before PRC. The case was considered in PRC meeting dt.18.07.2025 and the decision of PRC was as under:- “The Committee examined the case on the basis of submission made by the firm and discussed the matter at length. After detailed discussion it was decided to refer to the concerned Norms Committee for the grounds as stated (not responding to DL) for examination & resolution, provided it is a first Review.” 3. This is the first review filed by the firm. The case was referred to DPIIT for examination and comments vide mail dt.07.10.2025. The comments of DPIIT have been received.
4. The case was considered in NC-1 meeting dt.11.11.2025 and the decision of the Committee was to call the firm for personal hearing in the forthcoming meeting of NC-1. Accordingly, the firm has been called for personal hearing.

C-1 meeting dt.11.11.2025 and the decision of the Committee was to call the firm for personal hearing in the forthcoming meeting of NC-1. Accordingly, the firm has been called for personal hearing. The case is placed before NC-1 for consideration and taking appropriate decision in the matter. Decision: Firms’ representatives Mr. P.K. Bahl & Mr. A.K. Jha appeared for Personal Hearing in the meeting. They apprised the committee that the import item is a component used in the manufacture of export item namely, Oxygen Generator -40 Nm3/hr. and has been imported on net to net basis.

They further informed that import item namely, Oxygen Generator, Intelli Control & Oxygen monitor for Oxygen generator is fitted with indigenous items like Filter, Rotameter, PHV & fitting to make a functional oxygen plant and that the value of the indigenous items is Rs.2,50,000/-. They further clarified that the value of Rs. 14,66,378/- for indigenous items as informed by them earlier in the year 2015 was a mistake on their side and the same was informed by them in the year 2016.

UDIN00484460AM26

130 Keeping above in view, the committee decided to ratify the norms for the purpose of redemption of this A.A. on net to net basis as per General Note-4 for Engineering products.

Case No. 3

M.No.: NC/1/MEET/Dec/202526/8 (Offline Cases) dated 16.12.2025 AA No. : 0510397776 dated 01.03.2016

M/s. GASTEK ENGINEERING PRIVATE LIMITED Status of case

Approved

Subject: Review application for

fixation of ad-hoc norms.

Case history: The application of the firm for fixation of ad-hoc norms was rejected in NC-1 meeting dated
19/07/2016 and the decision of the Committee was as under:- “The Committee noted that the firm has not replied to the deficiency (raised by DIPP) letter sent to the firm on 12.05.2016 through email and final reminder sent to the firm on 24.06.2016 and decided to reject the case with direction to the firm to pay applicable custom duty with interest for EODC. RA may take further necessary action accordingly.” 2. Against the said rejection, the firm filed review before PRC. The case was considered in PRC meeting dt.18.07.2025 and the decision of PRC was as under:- “The Committee examined the case on the basis of submission made by the firm and discussed the matter at length. After detailed discussion it was decided to refer to the concerned Norms Committee for the grounds as stated (not responding to DL) for examination & resolution, provided it is a first Review.” 3. This is the first review filed by the firm. The case was referred to DPIIT for examination and comments vide mail dt.07.10.2025. The comments of DPIIT have been received.
4. The case was considered in NC-1 meeting dt.11.11.2025 and the decision of the Committee was to call the firm for personal hearing in the forthcoming meeting of NC-1. Accordingly, the firm has been called for UDIN00484460AM26

NC-1 meeting dt.11.11.2025 and the decision of the Committee was to call the firm for personal hearing in the forthcoming meeting of NC-1. Accordingly, the firm has been called for UDIN00484460AM26

131 personal hearing. The case is placed before NC-1 for consideration and taking appropriate decision in the matter. Decision: Firms’ representatives Mr. P.K. Bahl & Mr. A.K. Jha appeared for Personal Hearing in the meeting. They apprised the committee that the import items are ‘Carbon Molecular Sieves’ used in the manufacture of export items namely, Nitrogen Plants’ and have been imported on net to net basis.

Keeping above in view, the committee decided to ratify the norms for the purpose of redemption of this A.A. as per comments of DPIIT dated 10.10.2025, as under:  Export item at Sl No. 2  shall be of  " 99.5% purity" . 1. Export items at Sl No. 1 shall contain 1233 Kgs. of import item at Sl.No. 1. 2. Export items at Sl No. 2 shall contain 1266 Kgs. of import item at Sl.No. 2. 3. Quantity of import item at Sl.No. 1 may be allowed as applied for i.e. 1233 Kgs on net to net basis in the export item at SI.No.1 as claimed by the firm. 4. Quantity of import item at Sl.No. 2 may be allowed as applied for i.e. 1226 Kgs on net to net basis in the export item at SI.No.2 as claimed by the firm. 5. UDIN00484460AM26

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6987 --apply.