IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : dgft@nic.in , Phone Office : 011-23062777

(DES - I SECTION)

MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Jun/202526/5 DATED: 17/06/2025

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Jun/202526/5 dated 17/06/2025 of Norms Committee - I for the year 2025-26 was held on 17/06/2025 under the Chairmanship of HARDEEP SINGH,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Shri R.K. Jaiswal, DO MHI UDIN00164991AM26 This document has been digitally signed by Kruti B, Deputy DGFT,DGFT(HQ) on 26-Jun-2025. Digitally Signed. Name: B KRUTI( Deputy DGFT ) Date: 26-Jun-2025 14:37:34 Reason: kruti.bhat@gov.in Location: DGFT(HQ) Signature Not Verified

2 2 Shri Shaish Kumar, Consultant (Tech-1) Technical Consultant, DGFT 3 Shri S.K. Bhatnagar, Consultant (SKB) Technical Consultant, DGFT 4 Shri V.C. Agarwal, Consultant (Tech-3) Technical Consultant, DGFT

In Attendance: S.No. Name and Designation Department 1 Shri Randheep Thakur, Jt.DGFT DGFT 2 Ms. B. Kruti, Dy.DGFT DGFT

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

In Attendance: S.No. Name and Designation Department 1 Shri Randheep Thakur, Jt.DGFT DGFT 2 Ms. B. Kruti, Dy.DGFT DGFT

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name GENESIS PACKAGING PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Jun/ 202526/ 5 and 17/06/2025 HQ File Number HQRNORM APPLY 00001380AM26 RA File Number NA Licence No and Date NA

Norms Committee Decision:

The Committee considered the case regarding review of ad-hoc norms fixed in respect of AA No. 0711001201 dated 31-05-2021 as per agenda and decided to modify the ad-hoc norms fixed earlier in NC-1 meeting dated 05.12.2024 as per comments of Consultant (SKB) dated 17.06.2025, as under:

SL NO ITEM OF EXPORT ITEM OF IMPORT QUANTITY TO BE ALLOWED 1 LID (119579838 (NET CONTENT OF IMPORT ITEM IS 365670.683 KGS)

COLD ROLLED STAINLESS STEEL SHEETS 430BA + B & W WITH PVC.

446118.20 KGS INCLUSIVE OF 22.0% WASTAGE ON THE NET WEIGHT OF THE COLD ROLLED STAINLESS STEEL SHEETS 430BA + B & W WITH PVC IN THE EXPORT PRODUCT.

NOTE:

Wastage on the net weight of imported stainless steel with PVC in the export product.
The grade of imported stainless steel should match the grade of stainless steelused in the export product.
The thickness of the imported cold-rolled stainless-steel sheets 430 BA+B & W with PVC should match the thickness of the product being exported. RA concerned may take suitable consequential action accordingly.

Case No. 2 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MECAMIDI HPP INDIA PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ction accordingly.

Case No. 2 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MECAMIDI HPP INDIA PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

4 and Date HQ File Number HQRNORM APPLY 00004651AM25 RA File Number NA Licence No and Date NA Case deferred for the comments of TE.

Case No. 3 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MAGELLAN AEROSPACE (TUMKUR) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007151AM24 RA File Number NA Licence No and Date NA

Case No. 4 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name FITWEL GASKET COMPANY (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number 018305000619AM15 RA File Number 318304000129 AM15 Licence No and Date 3110064779/25/08/2014

Case No. 5 / NC/1/MEET/Jun/202526/5 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

5 Case Status Case Deferred Party Name UNI TRITECH PRIVATE LIMITED Meeting Number and Date HQ File Number 018005000726AM19 RA File Number 072404000345 AM17 Licence No and Date 0710111001/19/01/2017

Case No. 6 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006797AM25 RA File Number 092404000346 AM20 Licence No and Date 0910068054/01/10/2019

Case No. 7 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006804AM25 RA File Number 092404000344 AM20 Licence No and Date 0910068053/01/10/2019

UDIN00164991AM26

5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006804AM25 RA File Number 092404000344 AM20 Licence No and Date 0910068053/01/10/2019

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 8 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006392AM25 RA File Number 052304000381 AM20 Licence No and Date 0510413163/01/01/2020 The Committee considered the case as per the agenda and decided to call for the following information as per comments of concerned TE: Blow up diagram of export products. 1. Dimensional drawings/diagram of parts manufactured from imported raw materials. 2. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 3. Appendix-4E duly certified by Chartered Engineer and CA certificate for production consumption. 4. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 5.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 5. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 6. Sheet layout diagram of the material indicating the wastage during blanking. 7. GST invoice of scrap disposal. 8. Following data in Excel sheet for raw material imported: 9.

Export product to be manufactured Import % wastage on net content basis Manufacturing processes involved S.No. Import Item Part description Significant dimensions Quantity in number Net content (kg) of import item in one unit of export product Total Net content (kg) of import item in export product Size of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ize of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case stands deferred

Case No. 9 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED HQ File Number HQRNORM REVIW00006404AM25 RA File Number 052304000428 AM20 Licence No and Date 0510413578/11/02/2020 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE: Copy of the earlier decision of the Norms Committee along with justification for review of the same. 1. Blow up diagram of export products. 2. Dimensional drawings/diagram of parts manufactured from imported raw materials. 3. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 4. Appendix-4E duly certified by Chartered Engineer and CA certificate for production consumption. 5. 6. 7. Sheet layout diagram of the material indicating the wastage during blanking. 8. GST invoice of scrap disposal. 9. Following data in Excel sheet for raw material imported: 10.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

l indicating the wastage during blanking. 8. GST invoice of scrap disposal. 9. Following data in Excel sheet for raw material imported: 10.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

8 Export product to be manufactured Import % wastage on net content basis Manufacturing processes involved S.No. Import Item Part description Significant dimensions Quantity in number Net content (kg) of import item in one unit of export product Total Net content (kg) of import item in export product Size of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

Case No. 10 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00007676AM24 RA File Number 318304000160 AM20 Licence No and Date 3110067707/06/03/2020

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Meeting Number and Date HQ File Number HQRNORM REVIW00007676AM24 RA File Number 318304000160 AM20 Licence No and Date 3110067707/06/03/2020

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 11 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HUMANETICS INNOVATIVE SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006006AM25 RA File Number 072404000001 AM21 Licence No and Date 0710116407/30/04/2020

Case No. 12 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006444AM25 RA File Number 092404000187 AM21 Licence No and Date 0910068937/07/07/2020

Case No. 13 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006445AM25 RA File Number 092404000189 AM21 Licence No and Date 0910068940/07/07/2020 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

me Meeting Number and Date HQ File Number HQRNORM REVIW00006445AM25 RA File Number 092404000189 AM21 Licence No and Date 0910068940/07/07/2020 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 14 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006446AM25 RA File Number 092404000190 AM21 Licence No and Date 0910068933/07/07/2020

Case No. 15 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006447AM25 RA File Number 092404000191 AM21 Licence No and Date 0910068941/07/07/2020

Case No. 16 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006791AM25 RA File Number 092404000300 AM21 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

11 Licence No and Date 0910069154/07/09/2020

Case No. 17 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006806AM25 RA File Number 092404000302 AM21 Licence No and Date 0910069152/07/09/2020

Case No. 18 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00006807AM25 RA File Number 092404000301 AM21 Licence No and Date 0910069153/07/09/2020

Case No. 19 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name HERMINIO INDIA PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

10069153/07/09/2020

Case No. 19 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name HERMINIO INDIA PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

12 and Date HQ File Number HQRNORM REVIW00001327AM26 RA File Number 03AA04019380 AM21 Licence No and Date 0311001095/20/01/2021 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-3) dated 17.06.2025as under:

Export Product 1-Add "3636550 nos.' & Export Product 2-Add "1850815 nos." Import -Add " strips /coils" in both items 1- 30350 kg. after recovery 2-12832 kg. after recovery Note: - Grade& thickness of import items will be the same as used in Export Product.

Case No. 20 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 21 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED HQ File Number HQRNORM REVIW00006403AM25 RA File Number 05AA04018209 AM22 Licence No and Date 0511002782/25/05/2021 Copy of the earlier decision of the Norms Committee along with justification for review of the same. 1. Blow up diagram of export products. 2. Dimensional drawings/diagram of parts manufactured from imported raw materials. 3. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 4. Weight of each Export Product. 5. 6. 7. GST invoice of scrap disposal. 8. Following data in Excel sheet for raw material imported: 9.

Export product to be manufactured Import % wastage on net content basis Manufacturing processes involved Net content (kg) of import item in one unit of export S.No. Import Item Part description Significant dimensions Quantity in number Total Net content (kg) of import item in export product Size of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ize of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

14 product

Case No. 22 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005404AM25 RA File Number 09AA04003173 AM22 Licence No and Date 0911000927/27/05/2021

Case No. 23 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LAXMI DENTAL LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004888AM25 RA File Number 03AA04068249 AM22 Licence No and Date 0311006401/24/08/2021 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 24 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name GENESIS PACKAGING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001306AM26 RA File Number 07AA04038536 AM22 Licence No and Date 0711002290/03/11/2021 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed earlier as per comments of Consultant (SKB) dated 17.06.2025, as under:

Sl No Item of Export Item of Import Quantity to be allowed 1 LID (9544000 Nos Net Content of Import Item is 291855.520 Kgs)

COLD ROLLED STAINLESS STEEL SHEETS 430 BA+B & W WITH PVC SLIT EDGE0.30 MM x 820 MM x 1055 MM 356063.73 KGS INCLUSIVE OF 22% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS-STEEL SHEETS, 430 BA+B & W WITH PVC IN

STEEL SHEETS 430 BA+B & W WITH PVC SLIT EDGE0.30 MM x 820 MM x 1055 MM 356063.73 KGS INCLUSIVE OF 22% WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS-STEEL SHEETS, 430 BA+B & W WITH PVC IN THE EXPORT PRODUCT

NOTE:

Wastage on the net weight of imported stainless steel with PVC in the export product.
The grade of Stainless Steel should match the grade of the stainless steel in the export product.
The thickness of the imported cold-rolled stainless-steel sheets 430 BA+B & W with PVC should match the thickness of the product being exported. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 25 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HIGHLY ELECTRICAL APPLIANCES INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022

Case No. 26 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name GENESIS PACKAGING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001305AM26 RA File Number 07AX04000161 AM23 Licence No and Date 0711004029/19/05/2022 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed earlier as per comments of Consultant (SKB) dated 17.06.2025, as under:

Sl No Item of Export Item of Import Quantity to be allowed 1 LID (NET CONTENT OF IMPORT ITEM IS 145927.761 KGS) COLD ROLLED STAINLESS STEEL SHEETS 430 BA+B & W WITH PVC SLIT EDGE0.30 MM x 820 MM x 1055 MM 178031.87 KGS INCLUSIVE OF 22.0% WASTAGE ON THE NET WEIGHT

T OF IMPORT ITEM IS 145927.761 KGS) COLD ROLLED STAINLESS STEEL SHEETS 430 BA+B & W WITH PVC SLIT EDGE0.30 MM x 820 MM x 1055 MM 178031.87 KGS INCLUSIVE OF 22.0% WASTAGE ON THE NET WEIGHT OF COLD ROLLED STAINLESS STEEL SHEETS 430 BA+B & W WITH PVC IN THE EXPORT PRODUCT.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

17 NOTE:

Wastage on the net weight of imported stainless steel with PVC in the export product.
The grade of imported stainless steel should matchthe grade of stainless steel used in the export product.
The thickness of the imported cold-rolled stainless-steel sheets 430 BA+B & W with PVC should match the thickness of the product being exported.

Case No. 27 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name NUVOTEC TITANIUM PROCESS EQUIPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006452AM25 RA File Number 26AX04000043 AM23 Licence No and Date 2611000682/30/08/2022

Case No. 28 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00005395AM25 RA File Number 09AX04000487 AM23 Licence No and Date 0911003582/05/09/2022 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

me Meeting Number and Date HQ File Number HQRNORM REVIW00005395AM25 RA File Number 09AX04000487 AM23 Licence No and Date 0911003582/05/09/2022 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 29 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000718AM26 RA File Number 34AX04000667 AM23 Licence No and Date 3411002909/13/10/2022

Case No. 30 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED HQ File Number HQRNORM REVIW00006399AM25 RA File Number 33AX04000080 AM23 Licence No and Date 0511016230/07/12/2022 Copy of the earlier decision of the Norms Committee along with justification for review of the same. 1. Blow up diagram of export products. 2. Dimensional drawings/diagram of parts manufactured from imported raw materials. 3. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 4. 5. 6. 7. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ctured from imported raw materials. 3. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 4. 5. 6. 7. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

19 GST invoice of scrap disposal. 8. Following data in Excel sheet for raw material imported: 9.

Case No. 31 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005841AM23 RA File Number 31AX04000297 AM23 Licence No and Date 3111001976/20/01/2023 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

. Meeting Number and Date HQ File Number HQRNORM APPLY 00005841AM23 RA File Number 31AX04000297 AM23 Licence No and Date 3111001976/20/01/2023 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 32 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005842AM23 RA File Number 31AX04000300 AM23 Licence No and Date 3111001977/20/01/2023

Case No. 33 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM23 RA File Number 04AX04001036 AM23 Licence No and Date 0411004952/27/02/2023 Case deferred for the Factory Visit Report of Technical Team.

Case No. 34 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006912AM23 RA File Number 04AX04001090 AM23 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

eferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006912AM23 RA File Number 04AX04001090 AM23 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

21 Licence No and Date 0411005039/10/03/2023 Case deferred for the Factory Visit Report of Technical Team.

Case No. 35 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007183AM23 RA File Number 04AX04001128 AM23 Licence No and Date 0411005130/24/03/2023

Case No. 36 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007278AM23 RA File Number 04AX04001148 AM23 Licence No and Date 0411005172/29/03/2023

Case No. 37 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name PREMIER EXPLOSIVES LIMITED Meeting Number and UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

11005172/29/03/2023

Case No. 37 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name PREMIER EXPLOSIVES LIMITED Meeting Number and UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

22 Date HQ File Number HQRNORM APPLY 00000386AM24 RA File Number 09AX04001088 AM23 Licence No and Date 0911004866/25/04/2023 The Committee considered the case as per agenda and noted that this case pertains to clubbing of AA Nos. 0911004866 & 0911005480 for export of ROCKET MOTOR 160 LONG (PRO43). The Committee also noted that the firm has obtained SCOMET Authorisation Number 0101006413 dated 01/12/2022 for the export of the said item. After deliberating upon the case, the Committee decided to ratify the ad-hoc norms as per comments of Consultant (SKB) dated 17.06.2025, as under: AA NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY AND WASTAGE TO BE ALLOWED 0911004866 DATED 25.04.2023 1290 NOS FIN HOLDER ASSEMBLY, PN 12438-2350-51

210 NOS AERODYNAMIC COVER, PN 12438- 2515 1478 NOS SHORT SCREW, PN 12441-2301 11824 NOS

0911005480 DATED 25.07.2023 ROCKET MOTOR 160 LONG (PR043)

1500 NOS SPIN SCREW, PN 12443-2003 1478 NOS

Case No. 38 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name RAGHU VAMSI MACHINE TOOLS PRIVATE LIMITED UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

12443-2003 1478 NOS

Case No. 38 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name RAGHU VAMSI MACHINE TOOLS PRIVATE LIMITED UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

23 Meeting Number and Date HQ File Number HQRNORM REVIW00004967AM25 RA File Number 09AX04000204 AM24 Licence No and Date 0911005234/20/06/2023 The Committee considered the case as per agenda and noted that the information furnished in reply letters and application is inconsistent and incomplete. Therefore, the Committee decided to call the applicant in Personnel Hearing (PH) in the forthcoming meeting along with supporting documents to explain the case in detail. Case stands deferred.

Case No. 39 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name PREMIER EXPLOSIVES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004628AM24 RA File Number 09AX04000314 AM24 Licence No and Date 0911005480/25/07/2023 The Committee considered the case as per agenda and noted that this case pertains to clubbing of AA Nos. 0911004866 & 0911005480 for export of ROCKET MOTOR 160 LONG (PRO43). The Committee also noted that the firm has obtained SCOMET Authorisation Number 0101006413 dated 01/12/2022 for the export of the said item.

0911005480 for export of ROCKET MOTOR 160 LONG (PRO43). The Committee also noted that the firm has obtained SCOMET Authorisation Number 0101006413 dated 01/12/2022 for the export of the said item. After deliberating upon the case, the Committee decided to ratify the ad-hoc norms as per comments of Consultant (SKB) dated 17.06.2025, as under: AA NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY AND WASTAGE TO BE ALLOWED 0911004866 DATED 25.04.2023 1290 NOS FIN HOLDER ASSEMBLY, PN 12438-2350-51

210 NOS

ROCKET MOTOR 160 LONG (PR043)

1500 NOS UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

24 AERODYNAMIC COVER, PN 12438- 2515 1478 NOS SHORT SCREW, PN 12441-2301 11824 NOS 0911005480 DATED 25.07.2023 SPIN SCREW, PN 12443-2003 1478 NOS

Case No. 40 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005161AM24 RA File Number 06AX04000040 AM24 Licence No and Date 0611002150/21/08/2023 Case deferred for the comments of SCOMET DIVISION.

Case No. 41 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LAXMI DENTAL LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006622AM24 RA File Number 03AX04003350 AM24 Licence No and Date 0311028476/03/11/2023 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00006622AM24 RA File Number 03AX04003350 AM24 Licence No and Date 0311028476/03/11/2023 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 42 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008682AM24 RA File Number 03AX04004509 AM24 Licence No and Date 0311031372/21/02/2024

Case No. 43 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MASU BRAKE PADS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003276AM25 RA File Number 05AX04000007 AM25 Licence No and Date 0511024839/03/04/2024 The Committee considered the case as per agenda and noted that the review filed by the applicant is not clear. There is no clarity on review required and rationale for review. This needs to be clearly stated and supported by documents. Accordingly, the committee decided to call for the above clarification from the applicant within 15 days. Case stands deferred.

Case No. 44 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

bove clarification from the applicant within 15 days. Case stands deferred.

Case No. 44 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

26 Party Name PENGUIN PETROLEUM SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000310AM25 RA File Number 03AX04000181 AM25 Licence No and Date 0311033186/18/04/2024

Case No. 45 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name STERLITE ELECTRIC LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000220AM26 RA File Number 03AX04002464 AM24 Licence No and Date 0311035105/02/07/2024

“There is a discrepancy in the data provided under Annexure-F. The unit of measurement (UOM) for the export item is mentioned in kilometers (KM), whereas the input item is recorded in meters. Upon multiplying the export quantity with the length of optical fiber, the resulting figure does not align with the stated UOM in meters and appears to be in kilometers instead.The applicant is required to submit the revised calculation sheet under Annexure-F with appropriate corrections.”

Case No. 46 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name SANSERA ENGINEERING LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

priate corrections.”

Case No. 46 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name SANSERA ENGINEERING LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

27 and Date HQ File Number HQRNORM REVIW00005727AM25 RA File Number 07AX04000599 AM25 Licence No and Date 0711011851/22/07/2024

Case No. 47 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001022AM26 RA File Number 24AX04000165 AM25 Licence No and Date 2411003733/30/07/2024

Case No. 48 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name STREPARAVA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002474AM25 RA File Number 07AX04000805 AM25 Licence No and Date 0711012062/12/08/2024 comments of MHI dated 16.06.2025, as under:

Export Product: CONNECTING ROD M21J – PREMACH – 860 Nos. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

icence No and Date 0711012062/12/08/2024 comments of MHI dated 16.06.2025, as under:

Export Product: CONNECTING ROD M21J – PREMACH – 860 Nos. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

28 Import item: 34 CRNIMO6 MOD_A Round Dia 35mm Net wt. of each export product: 0.280 Kg. Total no. of export product: 860 701.932 Kg of import item may be allowed inclusive of wastage after recovery.

Case No. 49 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002830AM25 RA File Number 05AX04001729 AM25 Licence No and Date 0511027524/03/09/2024

Case No. 50 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001023AM26 RA File Number 24AX04000256 AM25 Licence No and Date 2411003884/18/09/2024

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Meeting Number and Date HQ File Number HQRNORM REVIW00001023AM26 RA File Number 24AX04000256 AM25 Licence No and Date 2411003884/18/09/2024

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 51 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001024AM26 RA File Number 24AX04000267 AM25 Licence No and Date 2411003904/01/10/2024

Case No. 52 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name L&T - MHI POWER BOILERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003576AM25 RA File Number 03AX04003413 AM25 Licence No and Date 0311037798/09/10/2024

Case No. 53 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001025AM26 RA File Number 24AX04000306 AM25 Licence No and Date 2411003953/23/10/2024 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ED Meeting Number and Date HQ File Number HQRNORM REVIW00001025AM26 RA File Number 24AX04000306 AM25 Licence No and Date 2411003953/23/10/2024 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 54 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003919AM25 RA File Number 08AX04001276 AM25 Licence No and Date 0811013091/29/10/2024 The Committee considered the case as per agenda. The Committee noted from the comments of MHI that Information furnished by the firm in DL reply is incomplete. There is ambiguity and inconsistency in weights mentioned in application, calculation sheet Annexure 1 attached to it and reply letter. As such, on the recommendation of MHI, the Committee decided to call the applicant on Personal Hearing(PH) in the forthcoming meeting along with allthe relevant documents relating to import and export materials.

Case stands deferred.

Case No. 55 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003920AM25 RA File Number 08AX04001275 AM25 Licence No and Date 0811013092/29/10/2024 The Committee considered the case as per agenda. The Committee noted from the comments of MHI that Information furnished by the firm in DL reply is incomplete. There is ambiguity and inconsistency in weights mentioned in application, calculation sheet Annexure 1 attached to it and reply letter.

Information furnished by the firm in DL reply is incomplete. There is ambiguity and inconsistency in weights mentioned in application, calculation sheet Annexure 1 attached to it and reply letter. As such, on the recommendation of MHI, the Committee decided to call the applicant on Personal Hearing(PH) in the forthcoming meeting along with allthe relevant documents relating to import and export materials. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case stands deferred.

Case No. 56 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003956AM25 RA File Number 08AX04001277 AM25 Licence No and Date 0811013127/30/10/2024 The Committee considered the case as per agenda. The Committee noted from the comments of MHI that Information furnished by the firm in DL reply is incomplete. There is ambiguity and inconsistency in weights mentioned in application, calculation sheet Annexure 1 attached to it and reply letter.

Case stands deferred.

Case No. 57 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001138AM26 RA File Number 31AX04000277 AM25 Licence No and Date 3111004074/12/11/2024

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 58 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001026AM26 RA File Number 24AX04000339 AM25 Licence No and Date 2411004028/14/11/2024

Case No. 59 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024

Case No. 60 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name AMEYA PRECISION ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000328AM26 RA File Number 31AX04000272 AM25 Licence No and Date 3111004120/26/11/2024 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ED Meeting Number and Date HQ File Number HQRNORM REVIW00000328AM26 RA File Number 31AX04000272 AM25 Licence No and Date 3111004120/26/11/2024 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

33 .Case deferred for the comments of TE.

Case No. 61 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004518AM25 RA File Number 31AX04000303 AM25 Licence No and Date 3111004156/03/12/2024

Case No. 62 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LECHLER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024

Case No. 63 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004875AM25 RA File Number 05AX04003174 AM25 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Approved Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004875AM25 RA File Number 05AX04003174 AM25 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

34 Licence No and Date 0511029707/18/12/2024 comments ofConsultant (SKB) dated 17.06.2025 , as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 5000 PSI WP WITH ACCESSORIES ( OIL FIELD EQUIPMENTS). QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 313: Net to net under GN-4 with accountability clause. WASTAGE TO BE ALLOWED: NIL. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

Case No. 64 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004876AM25 RA File Number 05AX04003173 AM25 Licence No and Date 0511029708/18/12/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments ofConsultant (SKB) dated 17.06.2025 as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 5000 PSI WP WITH ACCESSORIES. QUANTITY: 1NOS ITEMS OF IMPORTS Item No 1 to 320: Net to net under GN-4 with accountability clause. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

NIT RATED FOR 5000 PSI WP WITH ACCESSORIES. QUANTITY: 1NOS ITEMS OF IMPORTS Item No 1 to 320: Net to net under GN-4 with accountability clause. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 65 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005074AM25 RA File Number 33AX04000101 AM25 Licence No and Date 3311002436/26/12/2024

Case No. 66 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00005181AM25 RA File Number 05AX04003304 AM25 Licence No and Date 0511029952/30/12/2024 comments of Consultant (SKB) dated 17.06.2025, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED FINISHED BOP HOSE FIRE FIGHTER, 2" X 45 HOSE FIRE FIGHTER, 2" X 45 FT, S.S ARMORED WASTAGE NIL

1 2 NOS UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

36 COVER 5000 WP,2" MALE NPT END CONNECTION

MALE ELBOW FT OIL FIELD EQUIPMENTS 10001624 TEE BMI STD 2" NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE FIRE FIGHTER, 2" X 10 FT, S.S ARMORED COVER 5000 WP,2" MALE NPT END CONNECTION MALE ELBOW 2 FINISHED BOP HOSE FIRE FIGHTER, 2" X 10 FT OIL FIELD EQUIPMENTS

4 NOS 10001624 TEE BMI STD 2" WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE FIRE FIGHTER 1-1/2" ID WP 5000PSI,40FT ENDS1 MALE ELBOW SME 3 FINSHED BOP HOSE FIRE FIGHTER 1-1/2" ID WP 5000PSI,40FT ENDS1 OIL FIELD EQUIPMENTS 6 NOS 105 TEE T WASTAGE NIL

NET TO NET

SE FIRE FIGHTER 1-1/2" ID WP 5000PSI,40FT ENDS1 MALE ELBOW SME 3 FINSHED BOP HOSE FIRE FIGHTER 1-1/2" ID WP 5000PSI,40FT ENDS1 OIL FIELD EQUIPMENTS 6 NOS 105 TEE T WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE FIRE FIGHTER 1- 1/2"X30FT,S.S ARMORED COVER 5000 PSI WP,1- 1/2"MALE NPT END CONNECTION MALE ELBOW SME 4 FINISHED BOP HOSE FIRE FIGHTER 1-1/2" X 30 FT OIL FIELD EQUIPMENTS 4 NOS 105 TEE T WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

FINISHED BOP HOSE FIRE FIGHTER 1-1/2" X 10 FT OIL FIELD HOSE FIRE FIGHTER 1- 1/2"X10FT,S.S ARMORED COVER 5000 PSI WP,1- WASTAGE NIL

5 16 NOS UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

37 1/2"MALE NPT END CONNECTION MALE ELBOW SME EQUIPMENT 105 TEE T NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE FIRE FIGHTER 1"X90FT,S.S ARMORED COVER 5000 PSI WP,1"MALE NPT END CONNECTION ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY 6 FINISHED BOP HOSE FIRE FIGHTER 1" X 90 FT OIL FIELD EQUIPMENT 2 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

BOP HOSE, FIRE RESISTANT 1" X 35 FT,5000 PSI WP ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY 7 FINISHED BOP BOPHOSE,FIRE RESISTANT 1" X 35 FT OIL FIELD EQUIPMENT 2 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE,1"X25FT,5000 PSI W.PFIRE RETARDENT, 1" NPT MALE END ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY FST10 1 TEE 3000 FORGED 8

GE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

HOSE,1"X25FT,5000 PSI W.PFIRE RETARDENT, 1" NPT MALE END ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY FST10 1 TEE 3000 FORGED 8 FINISHED BOP HOSE FIRE FIGHTER,1" X 25 FT OIL FIELD EQUIPMENT 6 NOS WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

38 STEEL HOSE FIRE FIGHTER 1"X10FT,5000PSI WP 1"MALE NPT EN ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY. 9 FINISHED BOP HOSE FIRE FIGHTER 1" X 10 FT OIL FIELD EQUIPMENT
20 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

FIRE RESISTANT HOSE,SIZE 1"WORKING PRESSURE:5000PS ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY. 10 FINSHED BOP FIRE RESISTANT HOSE, SIZE 1"WORKING PRESSURE OIL FIELD EQUIPMENT
10 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

FIRE RESISTANT HOSE ASSEMBLY,1"ID,WP 5000 PSI,50FT ELBOW 1"NPT MALE X 1"NPSMSWIVEL FEMALE ASSY 11 FINISHED BOP FIRE RESISTANT HOSE ASSEMBLY,1"ID OIL FIELD EQUIPMENT
3 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

BLY,1"ID OIL FIELD EQUIPMENT
3 NOS FST10 1 TEE 3000 FORGED STEEL WASTAGE NIL

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 67 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005423AM25 RA File Number 07AX04001529 AM25 Licence No and Date 0711013246/03/01/2025

Application on ANF 4A & copy of AA are required

Case No. 68 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005424AM25 RA File Number 07AX04001541 AM25 Licence No and Date 0711013247/03/01/2025

Application on ANF 4A & copy of AA are required

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 69 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005425AM25 RA File Number 07AX04001545 AM25 Licence No and Date 0711013248/03/01/2025

Application on ANF 4A & copy of AA are required

Case No. 70 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005459AM25 RA File Number 07AX04001620 AM25 Licence No and Date 0711013260/06/01/2025

Application on ANF 4A & copy of AA are required

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

PLY 00005459AM25 RA File Number 07AX04001620 AM25 Licence No and Date 0711013260/06/01/2025

Application on ANF 4A & copy of AA are required

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 71 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005460AM25 RA File Number 07AX04001558 AM25 Licence No and Date 0711013261/06/01/2025

Application on ANF 4A & copy of AA are required

Case No. 72 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005461AM25 RA File Number 07AX04001564 AM25 Licence No and Date 0711013262/06/01/2025

Application on ANF 4A & copy of AA are required UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 73 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005509AM25 RA File Number 03AX04005033 AM25 Licence No and Date 0311040251/08/01/2025 comments of MHI dated 17.06.2025, as under:

Export item: Steam Turbine Blades (GSKW Project) – 1390 Nos (NET WEIGHT 415.64 KGS) Import item: ALLOY STEEL BAR WIDTH 30MM TO 45MM, thickness 45MM TO 75MM

Wastage allowed in respect of import item: Wastage of 608.85% on net content basis after recovery may be allowed as against 814% applied for. i.

EL BAR WIDTH 30MM TO 45MM, thickness 45MM TO 75MM

Wastage allowed in respect of import item: Wastage of 608.85% on net content basis after recovery may be allowed as against 814% applied for. i.

Case No. 74 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005522AM25 RA File Number 07AX04001637 AM25 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

43 Licence No and Date 0711013292/08/01/2025

Case No. 75 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005587AM25 RA File Number 07AX04001678 AM25 Licence No and Date 0711013322/10/01/2025

Case No. 76 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005593AM25 RA File Number 05AX04003280 AM25 Licence No and Date 0511030249/10/01/2025

Case No. 77 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

80 AM25 Licence No and Date 0511030249/10/01/2025

Case No. 77 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

44 and Date HQ File Number HQRNORM APPLY 00005595AM25 RA File Number 05AX04003291 AM25 Licence No and Date 0511030250/10/01/2025 comments of Consultant (SKB) dated 17.06.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 5000 PSI WP( OIL FIELD EQUIPMENT) QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 132: Net to net under GN-4 with accountability clause.

Case No. 78 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005626AM25 RA File Number 07AX04001688 AM25 Licence No and Date 0711013332/13/01/2025

Case No. 79 / NC/1/MEET/Jun/202526/5 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

45 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005667AM25 RA File Number 07AX04001700 AM25 Licence No and Date 0711013356/15/01/2025

Case No. 80 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00005668AM25 RA File Number 05AX04003580 AM25 Licence No and Date 0511030336/15/01/2025

Case No. 81 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005700AM25 RA File Number 05AX04003594 AM25 Licence No and Date 0511030371/16/01/2025

1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005700AM25 RA File Number 05AX04003594 AM25 Licence No and Date 0511030371/16/01/2025 comments ofConsultant (SKB) dated 17.06.2025, as under:

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

46 ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED 5000 PSI, PIPE RACK, MONITORING SYSTEM, BOP HOSES WITH ACCESSORIES( OIL FIELD EQUIPMENTS) QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 221: Net to net under GN-4 with accountability clause.

Case No. 82 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005754AM25 RA File Number 05AX04003713 AM25 Licence No and Date 0511030437/21/01/2025

Case No. 83 / NC/1/MEET/Jun/202526/5 Case Status Case Withdrawn Party Name A C BROTHERS HQ File Number HQRNORM APPLY 00005786AM25 RA File Number 05AX04003727 AM25 Licence No and Date 0511030449/22/01/2025 The Committee considered the case and noted the following comments of Consultant (Tech-1) on portal:- UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Licence No and Date 0511030449/22/01/2025 The Committee considered the case and noted the following comments of Consultant (Tech-1) on portal:- UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

“EXPORT AND IMPORT ARE WOOD ITEMS MAY BE REFERED TO NC 4” Accordingly, the Committee decided to transfer the case to NC-4 for further necessary action in the matter.

Case No. 84 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00005816AM25 RA File Number 07AX04001753 AM25 Licence No and Date 0711013433/23/01/2025

Case No. 85 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name MOLDURA TECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006122AM25 RA File Number 06AX04000481 AM25 Licence No and Date 0611003376/10/02/2025 comments of MHI dated 16.06.2025, as under:

Export product: Motor Vehicle Parts- Boot Stearing Rack made of Thermoplastic Vulcanizate Santoprene 101-87 (containing 41904.77 Kgs) Import item: Thermoplastic Vulcanizate Santoprene

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Stearing Rack made of Thermoplastic Vulcanizate Santoprene 101-87 (containing 41904.77 Kgs) Import item: Thermoplastic Vulcanizate Santoprene

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

48 Wastage allowed on import item: 5% wastage on net content basis.

Case No. 86 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00006312AM25 RA File Number 05AX04003603 AM25 Licence No and Date 0511031012/20/02/2025

Case No. 87 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00006364AM25 RA File Number 05AX04003928 AM25 Licence No and Date 0511031037/24/02/2025

Case No. 88 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

49 and Date HQ File Number HQRNORM APPLY 00006384AM25 RA File Number 34AX04001020 AM25 Licence No and Date 3411006121/24/02/2025 The Committee considered the case as per agenda and decided to call for DL for the following information as per comments of concerned TE:

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing.

and metal parts. 4. Net weight of Export Product. 5. Value of consumables. 5. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 6. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case stands deferred.

Case No. 89 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006483AM25 RA File Number 05AX04003956 AM25 Licence No and Date 0511031153/28/02/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

e Meeting Number and Date HQ File Number HQRNORM APPLY 00006483AM25 RA File Number 05AX04003956 AM25 Licence No and Date 0511031153/28/02/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

50 comments of Consultant (SKB) dated 17.06.2025as under:

ITEM OF EXPORT:
SARA SAE BOP CONTROL UNIT RATED 3000PSI AND SHEAR BOOST SYSTEM FOR 5000 PSI ( PARTS FOR OIL FIELD EQUIPMENTS) QUANTITY: 1NOS ITEMS OF IMPORTS Item No 1 to 121: Net to net under GN-4 with accountability clause.

Case No. 90 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED HQ File Number HQRNORM APPLY 00006559AM25 RA File Number 05AX04004118 AM25 Licence No and Date 0511031204/05/03/2025

Blow up diagram of export products. 1. Dimensional drawings/diagram of parts manufactured from imported raw materials. 2. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 3. 4. 5. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

nufactured from imported raw materials. 2. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 3. 4. 5. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

51 6. GST invoice of scrap disposal. 7. Following data in Excel sheet for raw material imported: 8. Export product to be manufactured Import % wastage on net content basis Manufacturing processes involved S.No. Import Item Part description Significant dimensions Quantity in number Net content (kg) of import item in one unit of export product Total Net content (kg) of import item in export product Size of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

Case No. 91 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006565AM25 RA File Number 05AX04004065 AM25 Licence No and 0511031208/05/03/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

y Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006565AM25 RA File Number 05AX04004065 AM25 Licence No and 0511031208/05/03/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

52 Date comments of Consultant (SKB) dated 17.06.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 5000 PSI WP QUANTITY: 1 NOS ITEMS OF IMPORTS Item No 1 to 313: Net to net under GN-4 with accountability clause.

Case No. 92 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name GEMSONS PRECISION ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006589AM25 RA File Number 03AX04006161 AM25 Licence No and Date 0311041885/06/03/2025

Detail technical note on manufacturing process including the relevant flow sheet. 1. 2. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

53 3. Sheet layout diagram of the material indicating the wastage during blanking. 4. Use of export product. 5.

Case No. 93 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006786AM25 RA File Number 03AX04006439 AM25 Licence No and Date 0311042338/20/03/2025

Case No. 94 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name EPE PROCESS FILTERS AND ACCUMULATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000083AM26 RA File Number 09AX04001226 AM25 Licence No and Date 0911009360/03/04/2025

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Meeting Number and Date HQ File Number HQRNORM APPLY 00000083AM26 RA File Number 09AX04001226 AM25 Licence No and Date 0911009360/03/04/2025

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

54 Application on ANF 4A & copy of AA are required

Case No. 95 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name SPM MEDICARE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000098AM26 RA File Number 05AX04004468 AM25 Licence No and Date 0511031788/04/04/2025 comments of Consultant (Tech-1) dated 17.06.2025, as under:

ITEM OF EXPORT FLUSH SYRINGES IMPORT POLYPROPYLENE – 1.04KG/KG CONTENT IN EXPORT

Case No. 96 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000104AM26 RA File Number 31AX04000497 AM25 Licence No and 3111004632/04/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

55 Date comments of Consultant (Tech-3) dated 17.06.2025 as under:

Import 1- 6930 kg. after recovery 2- 9680 kg. after recovery 3- 6164 kg. after recovery 4- 4626 kg. after recovery Note: Grade of item of import will be same as used in EP.

Case No. 97 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000105AM26 RA File Number 31AX04000498 AM25 Licence No and Date 3111004633/04/04/2025 comments of Consultant (Tech-3) dated 17.06.2025 as under:

Import 1- 150 kg. after recovery 2- 57 kg.

AM26 RA File Number 31AX04000498 AM25 Licence No and Date 3111004633/04/04/2025 comments of Consultant (Tech-3) dated 17.06.2025 as under:

Import 1- 150 kg. after recovery 2- 57 kg. after recovery UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

56 3- 285 kg. after recovery 4- 76 kg. after recovery 5- 11 kg. after recovery Note: Grade of item of import will be same as used in EP

Case No. 98 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name NOV MFG INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000113AM26 RA File Number 31AX04000478 AM25 Licence No and Date 3111004637/07/04/2025

Case No. 99 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000120AM26 RA File Number 31AX04000506 AM25 Licence No and Date 3111004639/07/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

e Meeting Number and Date HQ File Number HQRNORM APPLY 00000120AM26 RA File Number 31AX04000506 AM25 Licence No and Date 3111004639/07/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 100 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000121AM26 RA File Number 31AX04000507 AM25 Licence No and Date 3111004640/07/04/2025

Case No. 101 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HINDUSTAN PENCILS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000136AM26 RA File Number 03AX04000028 AM26 Licence No and Date 0311042926/08/04/2025

Case No. 102 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000141AM26 RA File Number 08AX04000036 AM26 Licence No and Date 0811014670/08/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

S Meeting Number and Date HQ File Number HQRNORM APPLY 00000141AM26 RA File Number 08AX04000036 AM26 Licence No and Date 0811014670/08/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 103 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000150AM26 RA File Number 07AX04000036 AM26 Licence No and Date 0711014142/08/04/2025

Case No. 104 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000157AM26 RA File Number 31AX04000003 AM26 Licence No and Date 3111004645/09/04/2025

Case No. 105 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000160AM26 RA File Number 31AX04000001 AM26 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

59 Licence No and Date 3111004646/09/04/2025

Case No. 106 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name FIUNEX CONSULTANTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000178AM26 RA File Number 31AX04000005 AM26 Licence No and Date 3111004648/09/04/2025

Case No. 107 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name JAYCEE AUTOFAB PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000199AM26 RA File Number 05AX04000030 AM26 Licence No and Date 0511031882/11/04/2025

Detail technical note on manufacturing process including the relevant flow sheet. 1.

le Number HQRNORM APPLY 00000199AM26 RA File Number 05AX04000030 AM26 Licence No and Date 0511031882/11/04/2025

Detail technical note on manufacturing process including the relevant flow sheet. 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. 3. 4. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

60 Quantity of export product “Tower boom, lower[Z] (103011013400)” at S. No. 3 is 40 sets whereas corresponding quantity of import item “Rectangular Tube Part 103011013388” at S. No. 5 is only 20 sets and hence clarification thereof. 5. Details of indigenous items in export products, if any. 6. Blow-up diagram of export products labelling imported parts. 7.

Case No. 108 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000200AM26 RA File Number 05AX04000021 AM26 Licence No and Date 0511031883/11/04/2025 The Committee considered the case as per agenda and decided to call for DL for the following information as per comments of concerned TE:

Generic name and write-up of export product at S.No.3. 1. Quantitative justification for components on labelled blow-up diagram showing imported parts for each export product. 2. Calculation sheet with dimensional drawing justifying import quantity and wastage for raw materials. 3. Dimensions including length of tubes imported and that in export product. 4. Net weight and dimensional drawing of each export product. 5. 6. 7.

import quantity and wastage for raw materials. 3. Dimensions including length of tubes imported and that in export product. 4. Net weight and dimensional drawing of each export product. 5. 6. 7. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 109 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000204AM26 RA File Number 05AX04000022 AM26 Licence No and Date 0511031884/11/04/2025

Generic name and write-up of export product at S.No.1. 1. Blow-up diagram of each export product showing imported parts and parts made from imported raw materials with quantitative justification. 2. Calculation sheet with dimensional drawing justifying import quantity and wastage for raw materials. 3. Dimensions including length of tubes imported and that in export product. 4. Net weight and dimensional drawing of each export product. 5. 6. 7.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ns including length of tubes imported and that in export product. 4. Net weight and dimensional drawing of each export product. 5. 6. 7.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 110 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000205AM26 RA File Number 05AX04000013 AM26 Licence No and Date 0511031885/11/04/2025

Case No. 111 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000206AM26 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

202526/5 Case Status Case Deferred Party Name LINE O MATIC GRAPHIC INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000206AM26 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

63 RA File Number 08AX04000051 AM26 Licence No and Date 0811014686/11/04/2025

Case No. 112 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000209AM26 RA File Number 05AX04000023 AM26 Licence No and Date 0511031891/11/04/2025

Generic name and write-up of export products. 1. Blow-up diagram of each export product showing imported parts and parts made from imported raw materials with quantitative justification. 2. Calculation sheet with dimensional drawing justifying import quantity and wastage for raw materials. 3. Dimensions including length of tubes imported and that in export product. 4. Net weight and dimensional drawing of each export product. 5. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 6.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 6. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 7.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 113 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name MOLDURA TECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000213AM26 RA File Number 06AX04000007 AM26 Licence No and Date 0611003522/11/04/2025 comments of MHI dated 16.06.2025, as under:

Export product: Motor Vehicle Parts- Boot Stearing Rack made of Thermoplastic Vulcanizate Santoprene 101-87 (containing 41904.77 Kgs) Import item: Thermoplastic Vulcanizate Santoprene

Wastage allowed on import item:5% wastage on net content basis.

Case No. 114 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LINEOMATIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000227AM26 RA File Number 08AX04000080 AM26 Licence No and Date 0811014703/15/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00000227AM26 RA File Number 08AX04000080 AM26 Licence No and Date 0811014703/15/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 115 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000230AM26 RA File Number 56AX04000009 AM26 Licence No and Date 5611003831/15/04/2025

Case No. 116 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name BENGAL INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000239AM26 RA File Number 05AX04000095 AM26 Licence No and Date 0511031906/15/04/2025

Case No. 117 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000243AM26 RA File Number 09AX04000025 AM26 Licence No and Date 0911009431/15/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

e Meeting Number and Date HQ File Number HQRNORM APPLY 00000243AM26 RA File Number 09AX04000025 AM26 Licence No and Date 0911009431/15/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg (after), wastage in kg, and wastage in percentage.
What is the finished weight of the Turbine Blade and the size thereof?
Coloured drawing of the Turbine Blade, which indicates the size of the raw material, the size of the finished blade, the weight of the raw material, and the finished product.
Size and shape of the stainless-steel Bars.
Test Mill Certificate of the grade and chemical composition of the imported stainless-steel Bars.
Reasons for asking for 4.40 liters, 3.15 liters, 5.00 liters, and 4.70 liters of coolant to manufacture 1 Nos Turbine Blade. Submit detailed calculations. What are the reasons the quantity of coolant differs in production?
All the documents should be certified by a Chartered Engineer.

Case No. 118 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000252AM26 RA File Number 08AX04000067 AM26 Licence No and Date 0811014722/16/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00000252AM26 RA File Number 08AX04000067 AM26 Licence No and Date 0811014722/16/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

Case No. 119 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000255AM26 RA File Number 08AX04000073 AM26 Licence No and Date 0811014723/16/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

68 4.

Case No. 120 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000256AM26 RA File Number 08AX04000071 AM26 Licence No and Date 0811014724/16/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

14724/16/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 121 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000257AM26 RA File Number 08AX04000070 AM26 Licence No and Date 0811014725/16/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

Case No. 122 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000267AM26 RA File Number 08AX04000068 AM26 Licence No and 0811014734/16/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

70 Date

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

Case No. 123 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000270AM26 RA File Number 05AX04000078 AM26 Licence No and Date 0511031936/16/04/2025

What is the quantity of export? 1. Detailed technical notes on the manufacturing process, including the relevant flow sheet. 2. Detailed technical drawings with dimensions of the export product, catalogue, if any, may also be furnished. 3. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

g the relevant flow sheet. 2. Detailed technical drawings with dimensions of the export product, catalogue, if any, may also be furnished. 3. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

71 Weight of each export product. 4. Assembly drawings of the resultant product showing placement and exact use of components in the export product (s). 5. Weight of the imported and indigenous inputs, separately for the product, for material balancing. 6.

Case No. 124 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000282AM26 RA File Number 31AX04000013 AM26 Licence No and Date 3111004670/16/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. 2. 3. 4.

Case No. 125 / NC/1/MEET/Jun/202526/5 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

72 Case Status Case Deferred Party Name SANSERA ENGINEERING LIMITED HQ File Number HQRNORM APPLY 00000285AM26 RA File Number 07AX04000055 AM26 Licence No and Date 0711014194/16/04/2025 Blow up diagram of export products. 1. Dimensional drawings/diagram of parts manufactured from imported raw materials. 2. Complete dimensions of all raw material imports, weight of each piece, number of pieces. 3. 4. 5. Sheet layout diagram of the material indicating the wastage during blanking. 6. GST invoice of scrap disposal. 7. Following data in Excel sheet for raw material imported: 8.

of pieces. 3. 4. 5. Sheet layout diagram of the material indicating the wastage during blanking. 6. GST invoice of scrap disposal. 7. Following data in Excel sheet for raw material imported: 8. Export product to be manufactured Import % wastage on net content basis Manufacturing processes involved S.No. Import Item Part description Significant dimensions Quantity in number Net content (kg) of import item in one unit of export product Total Net content (kg) of import item in export product Size of input piece Gross wt. required as input per unit of export product Total Import quantity (kg) required as gross input

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

73 2.

Case No. 126 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000286AM26 RA File Number 34AX04000025 AM26 Licence No and Date 3411006303/16/04/2025

Net content of FRP in Export Product.
Net content of Balsa Wood, PVC form (Weight wise) in Export Product.
Net weight of Pultrusions, plate and metal parts.
Net weight of Export Product.
Value of consumables.
Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated.

ous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 7. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 127 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000290AM26 RA File Number 09AX04000023 AM26 Licence No and Date 0911009449/17/04/2025

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg (after), wastage in kg, and wastage in percentage.
Coloured drawing of the export item, which indicates the size of the raw material, the size of the finished export items, the weight of the raw material, and the finished product.
Test Mill Certificate of the grade and chemical composition of the imported aluminium castings and bars.

he finished export items, the weight of the raw material, and the finished product.

Test Mill Certificate of the grade and chemical composition of the imported aluminium castings and bars.
All the documents should be certified by a Chartered Engineer.

Case No. 128 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name GE INDIA INDUSTRIAL PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000308AM26 RA File Number 31AX04000012 AM26 Licence No and Date 3111004679/17/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 129 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000315AM26 RA File Number 05AX04000001 AM26 Licence No and Date 0511031982/17/04/2025

Detailed technical notes on the manufacturing process, including the relevant flow sheet. 1. Detailed technical drawings with dimensions of the export product and a catalogue, if any, may also be furnished. 2. Weight of the Export Product. 3. Assembly drawings of the resultant product showing placement and exact use of components in the export product (s). 4. Weight of the imported and indigenous inputs, separately for the product, for material balancing. 5.

Case No. 130 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000316AM26 RA File Number 05AX04000041 AM26 Licence No and Date 0511031983/17/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

e Meeting Number and Date HQ File Number HQRNORM APPLY 00000316AM26 RA File Number 05AX04000041 AM26 Licence No and Date 0511031983/17/04/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

76 comments of Consultant (SKB) dated 17.06.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED 3000 PSI WP( OIL FIELD EQUIPMENT) QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 148: Net to net under GN-4 with accountability clause.

Case No. 131 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000317AM26 RA File Number 05AX04000042 AM26 Licence No and Date 0511031984/17/04/2025 comments of Consultant (SKB) dated 17.06.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED 3000 PSI WP( OIL FIELD EQUIPMENT) QUANTITY: 1 NOS ITEMS OF IMPORTS: UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

77 Item No 1 to 148: Net to net under GN-4 with accountability clause.

Case No. 132 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000549AM26 RA File Number 05AX04000294 AM26 Licence No and Date 0511032238/30/04/2025 comments of Consultant (SKB) dated 17.06.2025, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED 3000 PSI WP( OIL FIELD EQUIPMENT) QUANTITY: NOS ITEMS OF IMPORTS: Item No 1 to 125: Net to net under GN-4 with accountability clause.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

ATED 3000 PSI WP( OIL FIELD EQUIPMENT) QUANTITY: NOS ITEMS OF IMPORTS: Item No 1 to 125: Net to net under GN-4 with accountability clause.

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 133 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name AIM NONWOVENS AND INTERIORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000863AM26 RA File Number 31AX04000049 AM26 Licence No and Date 3111004789/16/05/2025

Case No. 134 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000911AM26 RA File Number 05AX04000437 AM26 Licence No and Date 0511032695/20/05/2025

Case No. 135 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000912AM26 RA File Number 05AX04000534 AM26 Licence No and Date 0511032696/20/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00000912AM26 RA File Number 05AX04000534 AM26 Licence No and Date 0511032696/20/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 136 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000917AM26 RA File Number 09AX04000144 AM26 Licence No and Date 0911009671/20/05/2025

Case No. 137 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name DOZCO (INDIA) PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000924AM26 RA File Number 05AX04000598 AM26 Licence No and Date 0511032723/20/05/2025

Case No. 138 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000958AM26 RA File Number 05AX04000316 AM26 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

80 Licence No and Date 0511032743/21/05/2025

Case No. 139 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number and Date HQ File Number HQRNORM APPLY 00000961AM26 RA File Number 05AX04000604 AM26 Licence No and Date 0511032752/21/05/2025

Case No. 140 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name ENDRESS + HAUSER FLOWTEC (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000971AM26 RA File Number 03AX04000823 AM26 Licence No and Date 0311044057/21/05/2025

Case No. 141 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name

te HQ File Number HQRNORM APPLY 00000971AM26 RA File Number 03AX04000823 AM26 Licence No and Date 0311044057/21/05/2025

Case No. 141 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

81 and Date HQ File Number HQRNORM APPLY 00001003AM26 RA File Number 05AX04000386 AM26 Licence No and Date 0511032803/22/05/2025

Case No. 142 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001007AM26 RA File Number 31AX04000072 AM26 Licence No and Date 3111004819/22/05/2025

Case No. 143 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001032AM26 RA File Number 34AX04000159 AM26 Licence No and Date 3411006485/23/05/2025

Net content of FRP in Export Product. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

QRNORM APPLY 00001032AM26 RA File Number 34AX04000159 AM26 Licence No and Date 3411006485/23/05/2025

Net content of FRP in Export Product. UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

82 2. Net content of Balsa Wood, PVC form (Weight wise) in Export Product. 3. Net weight of Pultrusions, plate and metal parts. 4. Net weight of Export Product. 5. Value of consumables. 6. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 7. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case No. 144 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001051AM26 RA File Number 03AX04000770 AM26 Licence No and Date 0311044180/24/05/2025

Case No. 145 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name RELIABLE AUTOTECH PRIVATE LIMITED Meeting Number and Date

03AX04000770 AM26 Licence No and Date 0311044180/24/05/2025

Case No. 145 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name RELIABLE AUTOTECH PRIVATE LIMITED Meeting Number and Date UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

83 HQ File Number HQRNORM APPLY 00001094AM26 RA File Number 31AX04000080 AM26 Licence No and Date 3111004845/27/05/2025

```
  Complete dimensions of import item.
```
```
  Part number of export item.
```

  Export item description is RETAINER,FIN  and the drawing attached has product description

Ring-Housing and hence clarification thereof. 4. Legible copy of export product dimensional drawing with export product description and part number. 5. Reason for importing rectangular bar for manufacture of export product fin retainer which as per drawing appears to be ring shaped. 6. Input blank size for manufacture of export product. 7. Calculation sheet for import requirement and wastage to be supported by dimensional drawings.

Case No. 146 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001110AM26 RA File Number 03AX04000873 AM26 Licence No and Date 0311044275/28/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00001110AM26 RA File Number 03AX04000873 AM26 Licence No and Date 0311044275/28/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 147 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name TECHNO AIRCON INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001121AM26 RA File Number 05AX04000738 AM26 Licence No and Date 0511032962/28/05/2025

Case No. 148 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001133AM26 RA File Number 07AX04000335 AM26 Licence No and Date 0711014569/28/05/2025

Case No. 149 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001147AM26 RA File Number 33AX04000016 AM26 Licence No and Date 3311002714/29/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

D Meeting Number and Date HQ File Number HQRNORM APPLY 00001147AM26 RA File Number 33AX04000016 AM26 Licence No and Date 3311002714/29/05/2025 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Case No. 150 / NC/1/MEET/Jun/202526/5 Case Status Case Approved Party Name MOLDURA TECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001174AM26 RA File Number 06AX04000112 AM26 Licence No and Date 0611003667/30/05/2025 comments of MHI dated 16.06.2025, as under:

Export product: Motor Vehicle Parts- i) Protector Steering Rack Boot made of Thermoplastic Vulcanizate Santoprene 103-40 (containing 10476.20Kgs) ii) Boot Steering Rack made of Thermoplastic Vulcanizate Santoprene 103-40 (containing 10476.20Kgs) Import item: Thermoplastic Vulcanizate - Santoprene 103-40

Wastage allowed on import item:5% wastage on net content basis.

Case No. 151 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

import item:5% wastage on net content basis.

Case No. 151 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

86 and Date HQ File Number HQRNORM APPLY 00001190AM26 RA File Number 31AX04000084 AM26 Licence No and Date 3111004855/30/05/2025

Case No. 152 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001206AM26 RA File Number 07AX04000353 AM26 Licence No and Date 0711014597/30/05/2025

Case No. 153 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001220AM26 RA File Number 08AX04000359 AM26 Licence No and Date 0811015180/02/06/2025

Case No. 154 / NC/1/MEET/Jun/202526/5 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

87 Case Status Case Deferred Party Name GODREJ AND BOYCE MANUFACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001225AM26 RA File Number 03AX04001058 AM26 Licence No and Date 0311044418/02/06/2025

Case No. 155 / NC/1/MEET/Jun/202526/5 Case Status Case Deferred Party Name GODREJ AND BOYCE MANUFACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001232AM26 RA File Number 03AX04001074 AM26 Licence No and Date 0311044426/02/06/2025

Minutes of Offline Cases Case No.1 M.No.: NC/1/MEET/June/202526/3 (Offline Cases) dated 17.06.2025 AA No. : 0510394137 dated 07/05/2015 M/s POWERWIND LIMITED Status of case HQ. No.: 018005000180AM16

Subject: Review application for

fixation of ad-hoc norms. Approved. Case history: The case of the firm for fixation of norms against Advance Authorization No.0510394137 dated UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

88 07/05/2015, was rejected in the Norms Committee-1 meeting dated 05/01/2016 and the decision of the committee was as under: “The committee noted that the firm has not replied to the C&PC deficiency letter F.No.46011/64/2014-PC-II dated 11.09.2015 followed by reminder dated 29.10.2015 and final reminder dated 18.12.2015 and decided to reject the case with direction to the firm to pay applicable custom duty with interest for EODC. RA may take further necessary action accordingly.” 2. The firm has now submitted offline application dated 07.02.2025 against the said decision and requested for condonation of delay in submission of review application. 3. Regarding filing of review application, the following has been clarified by the Policy Circular No.03/2024 dated 30.05.2024:- “Hence, it is clarified that, in the interest of export promotion and to promote ease of doing business, in all cases where Norm’s Committee decision were taken before 01.04.2023, the AA holder, who wishes for a review, may file their review application till 31.12.2024.

promote ease of doing business, in all cases where Norm’s Committee decision were taken before 01.04.2023, the AA holder, who wishes for a review, may file their review application till 31.12.2024. No such review will be entertained beyond this date.” Further, the following has been clarified vide the Addendum to Policy Circular No.03/2024, dated 31.05.2024:- “In reference to Policy Circular No.03/2024 dated 30.05.2024, it is informed that such review will applicable only for cases where Advance Authorization was issued on or after 01.04.2019 and no review decision had already been taken by the NC.” 4. The case was referred to Tech-1 for comments vide mail dated 19.03.2025 and subsequently, a DL was received from Tech-1 vide mail dt.21.03.25. As per the order of the Chairman, NC-1 on the review application, the case was considered by NC-1 in its meeting dated 21.03.2025 as offline case and the Committee decided to call for the following information as per comments of concerned TE:

QTY AND WEIGHT OF ACTUAL EXPORTS 2.QTY AND WEIGHT OF ACTUAL IMPORTS 3.WEIGHT OF VARIOUS ITEMS IMPORTED WITH ITS END USE 4.IN ITEM OF IMPORTS INDICATE ITS END USE ( RAW MATERIAL, COMPONENTS,CONSUMABLES) 5.GENERIC NAME OF IMPORT WHEREVER TRADE NAME IS PROVIDED 6.% WASTAGE CLAIMED FOR EACH IMPORT ITEM
DETAILS OF INDIGENOUS INPUT USED
MATERIAL BALANCE BETWEEN IMPORT AND EXPORT IN WEIGHT BASIS

  Subsequently, DL reply received from the firm was referred to Tech-1 vide mail dated 23.04.25 for

comments.

IGENOUS INPUT USED 8. MATERIAL BALANCE BETWEEN IMPORT AND EXPORT IN WEIGHT BASIS 5. Subsequently, DL reply received from the firm was referred to Tech-1 vide mail dated 23.04.25 for comments. The case was last considered in NC-1 meeting dated 16.05.2025 and the Committee decided to call for Net weight of export product. The firm has not yet furnished the said information. The case is placed before NC-1 for consideration.
UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

89 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 19.06.2025, as under: Total exports, as per shipping bills against import licence no. 0510394137 dated 07.05.2015 for exports of 6 nos. of Nacelle and Spinner cover for Wind Turbine, detailed as below: No Item of Export Quantity Total Weight Nacelle and Spinner Cover for Wind Turbine 6 103538.00 KGS Kgs

SL NO. DESCRIPTION Unit Qty 1 Divinycell MX10-8 5 GSC30 PFC20 1220X813X5MM (SQM) 198.00 2 Divinycell MX10-8 10 GSC30 PFC20 1220X813X10MM (SQM) 207.90 3 Divinycell MX10-8 15 GSC30 PFC20 1220X813X15MM (SQM) 1049.40 4 Divinycell MX10-8 20 GSC30 PFC20 1220X813X20MM (SQM) 579.15 5 Divinycell MX10-8 25 GSC30 PFC 2440X1220X25MM (SQM) 1140.40 6 Divinycell MX10-8 30 GSWC PFC 1220X813X30MM (SQM) 1405.80 7 907387-Epikure(TM) curing agent MGS RIMH 1366 IBC K.G 7,400.00 8 907412-EPIKOTE(TM) Resin MGS RIMR 135 K.G 62,400.00 9 907336-EPIKOTE Resin MGS LR 135 K.G 2880.00 10

C 1220X813X30MM (SQM) 1405.80 7 907387-Epikure(TM) curing agent MGS RIMH 1366 IBC K.G 7,400.00 8 907412-EPIKOTE(TM) Resin MGS RIMR 135 K.G 62,400.00 9 907336-EPIKOTE Resin MGS LR 135 K.G 2880.00 10 907144-EPIKOTE(TM) Resin MGS BPR 135G3 K.G 9,660.00 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

11 907119-Epikure curing agent MGS BPH 137G K.G 5,000.00 12 907245-Epikure curing agent MGS LH 136 K.G 1000.00 13 907391-Epikure(TM) curing agent MGS RIMH 137 K.G 9,900.00 14 Pro Balsa PB 19.05 GS C O 1220x610x19.05mm (SQM) 2467.02 15 Pro Balsa PB 25.4 GS CO 1220x610x25.4mm (SQM) 241.87 16 13262.0000.3.011 SEEVENAX- PROZESSCOAT 132- 62 FARBLOS/TRANSPAR ENT K.G 1075.00 17 13512.0000.0.312 SEEVENAX- HARTER/HARDENER 135-12 K.G 273 18 49127.7802.3.048 ALEXIT- MODELLIERSPACHTE L S 491-27 7802 LICHTGRAU / LIGHT GREY K.G 420 19 49527.0000.0.002 ALEXIT-ZUSATZ / HARDENER 495-27 K.G 84 20 49124.10NH.7.048 ALEXIT- WISCHFULLER 491-24 10NH GELB K.G 140 21 49524.0000.0.002 ALEXIT- HARTER / HARDENER 495-24 K.G 36 22 44271.7035.7.001 ALEXIT-LEADING EDGE PROTECTION 442-71 RAL 7035 LICHTGRAU / LIGHT GREY K.G 96 23 44571.0000.0.002 ALEXIT-HARTER / HARDENER 445-71 K.G 48 24 471 RK.7035.W.011 ALEXIT-TOPCOAT 471-RK RAL 7035 -LICHTGRAU / LIGHT GREY KG 2250 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

23 44571.0000.0.002 ALEXIT-HARTER / HARDENER 445-71 K.G 48 24 471 RK.7035.W.011 ALEXIT-TOPCOAT 471-RK RAL 7035 -LICHTGRAU / LIGHT GREY KG 2250 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

RA concerned may take suitable consequential action accordingly.

Case No.2 M. No.: NC/1/MEET/June/202526/3 (Offline Cases) dated 17.06.2025 AA No. : 0510375759 dated 09/01/2014 M/s POWERWIND LIMITED Status of case HQ. No.: 018005000043AM15

Subject: Review application for

fixation of ad-hoc norms. Approved. Case history: The case of the firm for fixation of norms against Advance Authorization No.0510375759 dated 25 405RK.0000.0.066 ALEXIT-HARDENER 405-RK KG 227.5 26 902RH.0000.0.199 ALEXIT-THINNER 902 -RH ROLL, HOT CLIMATE KG 150 27 A2049 2 LAYER LAMINATE STANDARD SQM 2116.5 28 M8615 450-130 2STGlass Fibers Mats KG 400 29 MGSRIMR 935 KG Not allowed 30 MGSRIMR 937 KG Not allowed 31 Extension Bolt M30x328 10.9 DT/DS black Bolt PW56 M30x328 10.9 NOS 700 32 TRANSVERSAL BOLT M60x75 DT/DS black Transversal Bolt Pw-56 NOS 500 33 Electric Chain Hoist GCH 500 1HFS 82PW, ACC Drawing 9401.3043.3 and120412 10 NOS Not allowed UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

92 09/01/2014, was rejected in the Norms Committee-1 meeting dated 06/01/2015 and the decision of the committee was as under: “The Committee noted that the firm has not replied to the final reminder dated 12.11.2014 and decided to reject the case with the direction to the firm to pay the applicable customs duty with interest. RA may take action accordingly.” 2. The firm has now submitted offline application dated 07.02.2025 against the said decision and requested for condonation of delay in submission of review application. 3.

ion accordingly.” 2. The firm has now submitted offline application dated 07.02.2025 against the said decision and requested for condonation of delay in submission of review application. 3. Regarding filing of review application, the following has been clarified by the Policy Circular No.03/2024 dated 30.05.2024:- “Hence, it is clarified that, in the interest of export promotion and to promote ease of doing business, in all cases where Norm’s Committee decision were taken before 01.04.2023, the AA holder, who wishes for a review, may file their review application till 31.12.2024. No such review will be entertained beyond this date.” Further, the following has been clarified vide the Addendum to Policy Circular No.03/2024, dated 31.05.2024:- “In reference to Policy Circular No.03/2024 dated 30.05.2024, it is informed that such review will applicable only for cases where Advance Authorization was issued on or after 01.04.2019 and no review decision had already been taken by the NC.” 4. The case was referred to Tech-1 for comments vide mail dated 19.03.2025. As per the order of the Chairman, NC-1 on the review application, the case was considered by NC-1 in its meeting dated 21.03.2025 as offline case and the Committee decided to call for the following information as per comments of concerned TE:

DETAILS OF ACTUAL EXPORT AND IMPORT MADE IN WEIGHT TERMS
GENERIC NAMES OF IMPORT ITEMS

e case and the Committee decided to call for the following information as per comments of concerned TE:

DETAILS OF ACTUAL EXPORT AND IMPORT MADE IN WEIGHT TERMS
GENERIC NAMES OF IMPORT ITEMS
COPY OF SHIPPING BILL INDICATEING WEIGHT OF EXPORT MADE 4.MATERIAL BALANCE BETWEEN IMPORT AND EXPORT MADE IN WEIGHT TERMS WITH DETAILS OF INDIGINOUS INPUTS IN WEIGHT SINCE WASTAGE SHOWN NIL IN APP 4E
PROCESS OF MFG STEPWISE IN DETAIL

     Subsequently, a DL was issued to the firm vide mail dated 03.04.2025. The case was last considered in NC-

1 meeting dated 16.05.2025 and the Committee decided to issue the reminder to the applicant to submit the requisite information/documents within 15 days. The reply of the firm is still awaited. The case is placed before NC-1 for consideration.
Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 19.06.2025, as under: Total exports, as per shipping Bills against import licence no. 0510375759 dated 09.01.2014 for exports of 7 nos. of Rotor Blades for Wind Turbine, detailed below: UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

shipping Bills against import licence no. 0510375759 dated 09.01.2014 for exports of 7 nos. of Rotor Blades for Wind Turbine, detailed below: UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

93 No. Item of Export Quantity Total Weight 1. Rotor Blades for Wind Turbine 7 52882.0 KG

SL NO. DESCRIPTION Unit , as per adv. license Qty. 1 ProBalsa PB 19.05 GS CO 1220X610X 19.05mm Sq.meter 1,148.48 2 ProBalsa PB 25.04 GS CO 1220X610X 25.04mm Sq.meter 79.95 3 Divinycell MX 10-8 5 GSC30 PFC 1220X813X5 mm Sq.meter 396.00 4 Divinycell MX 10-8 10 GSC30 PFC 1220X813X10 mm Sq.meter 148.50 5 Divinycell MX 10-8 15 GSC30 PFC 1220X813X15 mm Sq.meter 970.20 6 Divinycell MX 10-8 20 GSC30 PFC 1220X813X20 mm Sq.meter 163.35 7 Divinycell MX 10-8 25 GSC30 PFC 1220X813X25 mm Sq.meter 249.48 8 Divinycell MX 10-8 30 GSC30 PFC 1220X813X30mm Sq.meter 455.40 9 Epikure curing agent MGS RIMH 1366 K.G 4,500.00 10 EPIKOTE Resin MGS RIMR 135 K.G 26,000.00 11 EPIKOTE Resin MGS LR 135 Drum 240kg K.G 1,440.00 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Epikure curing agent MGS RIMH 1366 K.G 4,500.00 10 EPIKOTE Resin MGS RIMR 135 K.G 26,000.00 11 EPIKOTE Resin MGS LR 135 Drum 240kg K.G 1,440.00 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

94 12 EPIKOTE Resin MGS BPR 135G3 K.G 6,900.00 13 Epikure curing agent MGS BPH 137BPH 137G K.G 3,000.00 14 Epikure curing agent MGS LH 136
drum 200kg K.G 600.00 15 Epikure curing agent MGS RIMH 137 K.G 4,500.00 16 RELEST® WIND GELCOAT TRANSPERANT K.G 573.4 17 RELEST® HARDENER PUR 13 K.G 309.5 18 ALEXIT-TOPCOAT 471-(RAL-3020) K.G 200.00 19 ALEXIT-HARDENER 405 K.G Not allowed 20 ALEXIT-TOPCOAT 471- (RAL-2009) K.G 200.00 21 ALEXIT-Modellierspachtel S 491-27 7802 LIGHTGRAU/LIGHT GREY K.G 100.00 22 ALEXIT-ZUSATZ/HARDENER 495- 27 K.G 30 23 ALEXIT WISCHULLER 491-24 10 NH YELLOW/GELB K.G 40.00 24 ALEXIT-HARTER/HARDENER 495- 24 K.G 18.00 25 ALEXIT LEASING EDGE PROTECTION 442-71 7035 LIGHTGRAU/LIGHT GREY K.G 72.00 UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

95 26 ALEXIT-HARTER/HARDENER 445- 71 K.G 36.00 27 ALEXIT-TOPCOAT 471- 7035 LIGHTGRAU/LIGHT GREY K.G 775.00 28 ALEXIT-HARDENER 405 K.G 117.50 29 ALEXIT-THINNER 902-RH K.G 30.00 30 CFM M8615 450-130 2ST K.G 400.00 31 TOPAZ Membran PU mikroporos UNI001 WHITE-001 Sq.meter 1,000.00

UDIN00164991AM26 Digitally Signed. Location: DGFT(HQ)

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6980 --apply.