DGFT Minutes
In force — no superseding record on file.
1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : dgft@nic.in , Phone Office : 011-23062777
(DES - I SECTION)
MINUTES OF THE NORMS COMMITTEE- I
MEETING No. NC/1/MEET/Dec/202425/18 DATED: 23/12/2024
Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.
xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Dec/202425/18 dated 23/12/2024 of Norms Committee - I for the year 2024-25 was held on 23/12/2024 under the Chairmanship of HARDEEP SINGH,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Shri R.K. Jaiswal, DO MHI UDIN00514406AM25 This document has been digitally signed by Santosh Kumar Dubey, Deputy DGFT,DGFT(HQ) on 30-Dec-2024. Digitally Signed. Name: Santosh Kumar Dubey( Deputy DGFT ) Date: 30-Dec-2024 18:21:31 Reason: santoshk.dubey@nic.in Location: DGFT(HQ) Signature Not Verified
2 2 Shri S. K. Jain, Consultant DPIIT 3 Shri Shaish Kumar, Consultant (Tech-1) Technical Consultant, DGFT 4 Shri S.K. Bhatnagar, Consultant (SKB) Technical Consultant, DGFT 5 Shri V.C. Agarwal, Consultant (Tech-3) Technical Consultant, DGFT In Attendance: S.No. Name and Designation Department 1 Shri Santosh Kumar Dubey, Dy.DGFT DGFT UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
(Tech-3) Technical Consultant, DGFT In Attendance: S.No. Name and Designation Department 1 Shri Santosh Kumar Dubey, Dy.DGFT DGFT UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SKF BOILERS AND DRIERS PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Dec/ 202425/ 18 and 23/12/2024 HQ File Number HQRNORM APPLY 00000692AM25 RA File Number NA Licence No and Date NA
Norms Committee Decision:
The committee considered the case as per agenda and noted that the firm has applied for amendment of AA
No 0711010871; however, the firm has wrongly submitted DL reply in respect of AA No. 0711005469.
The Committee decided to seek correct DL reply and clarification from the firm within 15 days.
Case stands deferred.
Case No. 2 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name WEST COAST PAPER MILLS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003677AM25 RA File Number NA Licence No and Date NA The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:
- Details of export product in terms of design, calculations, and brief notes about export product as well as import inputs.
- Justification of claimed Wastage over per unit requirement without wastage.
- Quantity of import items required for manufacturing one unit of export product for each export item. (Share excel sheet).
- Calculations on per unit requirement of Import item for manufacturing one unit of export product without wastage. (Share excel sheet)
- Wastage claimed in the manufacturing process and details of recoverable wastage. (Share Excel sheet)
- You are also requested to provide the per-unit requirement in Excel sheet. Share the above Point (3-6) information/details in excel sheet in the below format. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ovide the per-unit requirement in Excel sheet. Share the above Point (3-6) information/details in excel sheet in the below format. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
4 S.NO. A.A. NO. Description of resultant product Export Quantity Export UOM Description of items to be imported Per Unit Requirement of Raw Material without wastage (As applied by the firm) Wastage claimed in % Per Unit Requirement of Raw Material with wastage (As applied by the firm)
UOM Total Quantity Sought in DGFT
Case No. 3 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004555AM25 RA File Number 039504000074 AM16 Licence No and Date 0310795761/07/05/2015 The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments of DPIIT dated 18.12.2024, as under:
Quantity of import item at SI No. 1 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. i.
RA concerned may take suitable consequential action accordingly.
Case No. 4 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name AYYAPPA CNC PRIVATE LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Case No. 4 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name AYYAPPA CNC PRIVATE LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
5 HQ File Number HQRNORM REVIW00002380AM25 RA File Number 072404000152 AM16 Licence No and Date 0710108550/24/07/2015 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:
Brief case history. a. Details of duty paid and outstanding. b. Details of export products. c. Excel sheet of export product (EP) including EP name, EP Sketch net weight of EP, Input raw material dimension and weight, and quantity in numbers d. For each raw material imported, total import quantity in Kg, total net weight of import item contained in the EP and % wastage on net content basis. e. GST invoice of scrap disposal. f.
Case No. 5 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004556AM25 RA File Number 039504000535 AM17 Licence No and Date 0310808333/07/10/2016 DPIIT dated 18.12.2024, as under:
Quantity of import item at SI No. 1 to 7 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. i.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
item at SI No. 1 to 7 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. i.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
6
Case No. 6 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004557AM25 RA File Number 039504000798 AM17 Licence No and Date 0310810465/11/01/2017 DPIIT dated 18.12.2024, as under:
Quantity of import item at SI No. 1 to 3 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. i.
Case No. 7 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name VALMET TECHNOLOGIES AND SERVICES PRIVATELIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004552AM24 RA File Number NA Licence No and Date 3110066640/29/03/2017 Case deferred for the comments of TE. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
mber HQRNORM APPLY 00004552AM24 RA File Number NA Licence No and Date 3110066640/29/03/2017 Case deferred for the comments of TE. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
7
Case No. 8 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HTL LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003859AM25 RA File Number 042404000059 AM18 Licence No and Date 0410163237/19/06/2017
Case No. 9 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HTL LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003858AM25 RA File Number 042404000151 AM18 Licence No and Date 0410163668/06/11/2017
Case No. 10 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004428AM25 RA File Number 052304000487 AM18 Licence No and Date 0510405815/08/03/2018 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ber and Date HQ File Number HQRNORM REVIW00004428AM25 RA File Number 052304000487 AM18 Licence No and Date 0510405815/08/03/2018 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
8
Case No. 11 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name NNF TECHNOLOGIES Meeting Number and Date HQ File Number 018005000665AM19 RA File Number 072404000268 AM19 Licence No and Date 0710114561/15/02/2019 The committee considered the case as per agenda and noted that a deficiency letter dated 11.11.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
Case No. 12 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name OSWAL PUMPS LIMITED Meeting Number and Date HQ File Number 018005000158AM20 RA File Number 332404000017 AM20 Licence No and Date 3310030578/27/08/2019 The committee considered the case as per agenda and noted that a deficiency letter dated 11.11.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
9
Case No. 13 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004554AM25 RA File Number 039504001012 AM20 Licence No and Date 0310834142/14/01/2020 DPIIT dated 18.12.2024, as under:
Quantity of import item at SI No. 1 may be allowed on net to net basis with accountability clause as per GN-4 for Engineering Products. i.
Case No. 14 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002504AM23 RA File Number 052404000398 AM20 Licence No and Date 0510413428/23/01/2020 The committee considered the case as per agenda and noted that a deficiency letter dated 11.11.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
letter dated 11.11.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
10 received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
Case No. 15 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004424AM25 RA File Number 052304000427 AM20 Licence No and Date 0510413543/10/02/2020
Case No. 16 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004457AM25 RA File Number 052304000434 AM20 Licence No and Date 0510413570/10/02/2020
Case No. 17 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
0510413570/10/02/2020
Case No. 17 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
11 Meeting Number and Date HQ File Number HQRNORM REVIW00007676AM24 RA File Number 318304000160 AM20 Licence No and Date 3110067707/06/03/2020
Case No. 18 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004423AM25 RA File Number 052304000045 AM21 Licence No and Date 0510414366/10/06/2020
Case No. 19 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name KAY BOUVET ENGINEERING LTD Meeting Number and Date HQ File Number HQRNORM REVIW00000871AM25 RA File Number 31AA04006205 AM21 Licence No and Date 3111000183/18/02/2021 The Committee considered the case as per agenda and noted that case was rejected due to non-submission of deficient document by the applicant. Now, the Committee decided to review the case and to fix the ad- hoc norms as per comments of MHI dated 19.12.2024, as under:
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
. Now, the Committee decided to review the case and to fix the ad- hoc norms as per comments of MHI dated 19.12.2024, as under:
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
12 Note: The written recommendation as given by MHI will be communicated to the concerned RA through email.
Case No. 20 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021
Case No. 21 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name MODINE THERMAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00114116AM21 RA File Number 04AA04008535 AM21 Licence No and Date 0411000520/26/03/2021 The committee considered the case as per agenda and noted that representatives of the firm were present on virtual PH. The Committee noted that the weight of import items and export product furnished by the firm are inconsistent with regard to material balancing. Further, UOM of imported components should be indicated in Numbers, which are not available. Hence, the Committee asked the firm’s representatives to submit the clarification/required documents as soon as possible.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
able. Hence, the Committee asked the firm’s representatives to submit the clarification/required documents as soon as possible.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
13
Case No. 22 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003676AM25 RA File Number 05AA04048981 AM22 Licence No and Date 0511003469/06/07/2021
Case No. 23 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHNSON MATTHEY INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004404AM25 RA File Number 05AA04053715 AM22 Licence No and Date 0511003669/15/07/2021
Case No. 24 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HIGHLY ELECTRICAL APPLIANCES INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
14
Case No.
25 / NC/1/MEET/Dec/202425/18
Case Status
Case Deferred
Party Name
JVS FLOW CONTROL PRIVATE LIMITED
Meeting Number
and Date
HQ File Number
HQRNORM APPLY 00401476AM22
RA File Number
34AX04000421 AM22
Licence No and
Date
3411002031/25/03/2022
The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024
followed by several reminders was issued to the applicant for providing certain information/documents.
However, no reply has yet been received. Hence, the committee decided to issue final reminder to the
applicant to submit the requisite information/documents within 15 days.
Case No. 26 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JAMPOW FABRICATORS Meeting Number and Date HQ File Number HQRNORM APPLY 00000470AM23 RA File Number 31AX04000001 AM23 Licence No and Date 3111001314/28/04/2022 The committee considered the case as per agenda and noted that a deficiency letter dated 18.12.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
15
Case No. 27 / NC/1/MEET/Dec/202425/18 Case Status Case Rejected Party Name KINECO KAMAN COMPOSITES- INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000510AM23 RA File Number 03AX04000409 AM23 Licence No and Date 0311014290/29/04/2022 The committee considered the case as per agenda and noted that vide letter dated 06.11.2024, the firm has stated that it has already received rejection letter against the said AA and requested for closure of the case. Hence, the committee decided to close and to reject the case.
Case stands rejected.
Case No. 28 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HTL LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001008AM23 RA File Number 04AX04000157 AM23 Licence No and Date 0411003380/26/05/2022 The committee considered the case as per agenda and noted that a deficiency letter dated 18.12.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
16
Case No. 29 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name MODINE THERMAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003294AM23 RA File Number 04AX04000536 AM23 Licence No and Date 0411003999/22/09/2022 The committee considered the case as per agenda and noted that representatives of the firm were present on virtual PH. The Committee noted that the weight of import items and export product furnished by the firm are inconsistent with regard to material balancing. Further, UOM of imported components should be indicated in Numbers, which are not available. Hence, the Committee asked the firm’s representatives to submit the clarification/required documents as soon as possible.
Case No. 30 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007304AM24 RA File Number NA Licence No and Date 3111001710/26/09/2022
Case No. 31 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
4 RA File Number NA Licence No and Date 3111001710/26/09/2022
Case No. 31 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
17 Party Name CANARA HYDRAULICS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003487AM25 RA File Number 07AX04001148 AM23 Licence No and Date 0711005719/17/11/2022 The Committee considered the case as per agenda and noted the comments of MHI dated 20.12.2024. The comments given by MHI do not indicate the % wastage allowed on net content after recovery in respect of import items. Hence, the Committee decided to defer this case and to discuss this further in the forthcoming meeting.
Case No. 32 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001697AM25 RA File Number 05AX04002080 AM23 Licence No and Date 0511016024/25/11/2022 hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 33 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHN CRANE SEALING SYSTEMS INDIA PRIVATELIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
.
Case No. 33 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name JOHN CRANE SEALING SYSTEMS INDIA PRIVATELIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
18 Meeting Number and Date HQ File Number HQRNORM REVIW00004357AM25 RA File Number 07AX04001562 AM23 Licence No and Date 0711006208/18/01/2023
Case No. 34 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005841AM23 RA File Number 31AX04000297 AM23 Licence No and Date 3111001976/20/01/2023
Case No. 35 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005842AM23 RA File Number 31AX04000300 AM23 Licence No and Date 3111001977/20/01/2023
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
19 Case No. 36 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name MAGOTTEAUX INDUSTRIES PRIVATE LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00005856AM23 RA File Number 24AX04000304 AM23 Licence No and Date 2411002181/20/01/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 18.12.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received.
sidered the case as per agenda and noted that a deficiency letter dated 18.12.2024 was issued to the applicant for providing certain information/documents. However, no reply has yet been received. Hence, the committee decided to issue reminder to the applicant to submit the requisite information/documents within 15 days.
Case No. 37 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ARIHANT INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00006005AM23 RA File Number 33AX04000100 AM23 Licence No and Date 3311001060/31/01/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024
Case No. 38 / NC/1/MEET/Dec/202425/18 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
20 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM23 RA File Number 04AX04001036 AM23 Licence No and Date 0411004952/27/02/2023 Case deferred for the comments of Technical team for factory visit.
Case No. 39 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006912AM23 RA File Number 04AX04001090 AM23 Licence No and Date 0411005039/10/03/2023 Case deferred for the comments of Technical team for factory visit.
Case No. 40 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ARMOR PLAST PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007001AM23 RA File Number 07AX04001890 AM23
e No. 40 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ARMOR PLAST PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007001AM23 RA File Number 07AX04001890 AM23 Licence No and Date 0711006770/15/03/2023
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
21
Case No. 41 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name INTENSIV-FILTER HIMENVIRO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007186AM23 RA File Number 05AX04003529 AM23 Licence No and Date 0511017984/24/03/2023
Case No. 42 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name RAVINDRA HERAEUS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007196AM23 RA File Number 13AX04000340 AM23 Licence No and Date 1311001833/24/03/2023
Case No. 43 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007278AM23 RA File Number 04AX04001148 AM23 Licence No and Date 0411005172/29/03/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00007278AM23 RA File Number 04AX04001148 AM23 Licence No and Date 0411005172/29/03/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
22 Case deferred for the comments of Technical team for factory visit.
Case No. 44 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001707AM25 RA File Number 05AX04003576 AM23 Licence No and Date 0511018085/29/03/2023 hoc norms as per comments of MHI dated 23.12.2024, as under:
RA through email.
Case No. 45 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ANAND SEAMLESS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000032AM24 RA File Number 08AX04001959 AM23 Licence No and Date 0811007810/06/04/2023 DL issued on 18.12.2024, reply is awaited from the applicant. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Number 08AX04001959 AM23 Licence No and Date 0811007810/06/04/2023 DL issued on 18.12.2024, reply is awaited from the applicant. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
23
Case No. 46 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name PREMIER EXPLOSIVES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000386AM24 RA File Number 09AX04001088 AM23 Licence No and Date 0911004866/25/04/2023 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:
- What is the manufacturing activity on the imported inputs?
- Why the number of imported items in numbers are different when the export items are also in numbers? Give full justification.
- Submit a list of imported inputs required in each export product to match the quantity of the imported items in the total export items.
- In the Appendix 4E, indigenous inputs show NA. How the imported inputs could be required for manufacturing the export product? If indigenous items are there, submit a revised Appendix 4E.
Case No. 47 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name OAM SAAI INTERNATIONAL INC. Meeting Number and Date HQ File Number HQRNORM APPLY 00000881AM24 RA File Number 05AX04000245 AM24 Licence No and Date 0511018850/16/05/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
d Date 0511018850/16/05/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
24
Case No. 48 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BHOLA ENGINEERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000942AM24 RA File Number 03AX04000500 AM24 Licence No and Date 0311023681/18/05/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024
Case No. 49 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004482AM25 RA File Number 05AX04000463 AM24 Licence No and Date 0511019172/05/06/2023 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
25 SL NO EXPORT ITEM QUANTI TY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED PIPE FITTING CARBON STEEL, P280GH, P305GH, P265GH, P280GH EN10222- 2, EN10253-2, EN10216-2 SA/A 234 WPB/WPC, SA/A 106 GR.B/ ELBOW/ FORGED CAP/ CONCENTRIC REDUCTION/TEE /COUPLING /FORGED NOZZLE /FORGED MAIN PIPE /FORGED BRANCH /SOCKOLET/ WELDOLET & ALL TYPES OF VARIANTS. NET TO NET UNDER GN-4 WITH ACCOUNTABILI TY CLAUSE. Flanges Carbon steel, SA / A 105, SA/ A 350 LF 2 (LTCS), SA/ A 350 LF 2 (LTCS), EN10222-2, EN10028-2, P265GH, P280GH EN10222- 2 NET TO NET UNDER GN-4 WITH ACCOUNTABILI TY CLAUSE.
TY CLAUSE.
Flanges Carbon steel, SA / A
105, SA/ A 350 LF 2 (LTCS),
SA/ A 350 LF 2 (LTCS),
EN10222-2, EN10028-2,
P265GH, P280GH EN10222-
2
NET TO NET
UNDER GN-4
WITH
ACCOUNTABILI
TY CLAUSE.
PIPE FITTING ALLOY
STEEL, 11CrMo9-10
EN10222-2,SA/A 182 / SA
234 GRADE P1 TO
P92,EN10222-2,EN10253-2,
REDUCERS / ELBOW / END
CAPS/Forged Branch/Forged
Main Pipe/ TEE / COUPLING
/ SOCKOLET/ WELDOLET
1
PARTS
CONSISTING PRE-
FABRICATED
PIPINGS FOR
BOILERS
7.0 MTS
NET TO NET
UNDER GN-4
WITH
ACCOUNTABILI
TY CLAUSE.
UDIN00514406AM25
Digitally Signed.
Deputy DGFT )
Location: DGFT(HQ)
26 /WELD ON SOCKET / FORGED NOZZLE/ FORGED CAP / Y PIECE / MEGALET & ALL TYPES OF VARIANTS
NOTE: 1. THE GRADE OF MATERIAL AND SIZES OF IMPORTED ITEMS SHOULD BE MATCHED WITH THE GRADE OF MATERIALS AND SIZES GOING IN THE EXPORT PRODUCT.
- THE ITEM OF IMPORT WILL BE CLUBBED WITH THE ITEM OF EXPORT OF AAs No 511016565 DATED 27.12.2022, 511018362 DATED 18.04.2023, and 511018617 dated 02.05.2023
Case No. 50 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004481AM25 RA File Number 05AX04001000 AM24 Licence No and Date 0511019766/13/07/2023 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL NO ITEM OF EXPORT QUANTITY ITEMS OF IMPORT QUANTITY TO BE ALLOWED ALLOY STEEL PIPES. SA/ A 335 GRADE P1 TO P95 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL PIPES IN THE EXPORT PRODUCT. 1 PARTS CONSISTING OF PRE-FABRICATED PIPING
PORT QUANTITY TO BE ALLOWED ALLOY STEEL PIPES. SA/ A 335 GRADE P1 TO P95 1.02 KGS/KGS ON THE NET WEIGHT OF ALLOY STEEL PIPES IN THE EXPORT PRODUCT. 1 PARTS CONSISTING OF PRE-FABRICATED PIPING FOR OIL GASES PLANT.
43.00 MTS UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
27 VALVES.
NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE
NOTE: 1. THE GRADE AND SIZE OF IMPORTED ITEM SHOULD BE MATCHED WITH THE GRADE AND SIZE OF THE ALLOY STEEL PIPES GOING IN THE EXPORT PRODUCT. 2. THE ITEM OF IMPORT WILL BE CLUBBED WITH THE ITEM OF EXPORT OF AAs No 511013731 DATED 13.07.2022, 511014350 DATED 18.08.2022,511014456 dated 24.08.2022, 511015071 dated 29.09.2022,511015074 dated 29.09.2022, 511016268 dated 09.12.2022, 511016532 dated 26.12.2022, 511017406 dated 20.02.2023, 511017350 dated 15.02.2023, 511021451 dated 10.10.2023, 511021744 dated 25.10.2023.
Case No. 51 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name PREMIER EXPLOSIVES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004628AM24 RA File Number 09AX04000314 AM24 Licence No and Date 0911005480/25/07/2023 The Committee considered the case as per agenda and decided to call the applicant on PH in the forthcoming meeting to explain the case in detail.
Case No. 52 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
.
Case No. 52 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
28 and Date HQ File Number HQRNORM REVIW00001703AM25 RA File Number 05AX04001117 AM24 Licence No and Date 0511020077/27/07/2023 hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 53 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005161AM24 RA File Number 06AX04000040 AM24 Licence No and Date 0611002150/21/08/2023 Case deferred for the comments of SCOMET DIVISION.
Case No. 54 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001704AM25 RA File Number 05AX04001937 AM24 Licence No and 0511021294/03/10/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
g Number and Date HQ File Number HQRNORM REVIW00001704AM25 RA File Number 05AX04001937 AM24 Licence No and 0511021294/03/10/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
29 Date hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 55 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GALVA DECO PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003697AM25 RA File Number 52AX04000194 AM24 Licence No and Date 5211005932/09/10/2023 The Committee considered the case as per agenda and decided to call for the following information/documents as per comments of TE:
Wastage in Appendix 4E of the CE certificate is stated as NIL, however wastage is being shown in the reply. Clarification thereof. i. What is net weight of import item contained in Export Product? ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
30
Case No. 56 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GALVA DECO PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003698AM25 RA File Number 52AX04000195 AM24 Licence No and Date 5211005933/09/10/2023
Wastage in Appendix 4E of the CE certificate is stated as NIL, however wastage is being shown in the reply. Clarification thereof. i. What is net weight of import item contained in Export Product? ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.
Case No. 57 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GEECY ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006158AM24 RA File Number 03AX04003142 AM24 Licence No and Date 0311027789/11/10/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00006158AM24 RA File Number 03AX04003142 AM24 Licence No and Date 0311027789/11/10/2023 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
31 The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024
Case No. 58 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004483AM25 RA File Number 05AX04001966 AM24 Licence No and Date 0511021803/31/10/2023 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL NO EXPORT ITEM QUANTITY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED 1 FURNACE PARTS FOR GAS BURNERS.
19.80 MTS
LRGO BURNERS CASTINGS (HUB, CAP & ARM)
1.02 KG/KG OF THE NET WEIGHT OF CASTINGS IN THE EXPORT PRODUCT. NOTE: THE ITEM OF IMPORT WILL BE CLUBBED WITH AA No 511021804 DATED 30.12.2023.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ET WEIGHT OF CASTINGS IN THE EXPORT PRODUCT. NOTE: THE ITEM OF IMPORT WILL BE CLUBBED WITH AA No 511021804 DATED 30.12.2023.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
32
Case No. 59 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006777AM24 RA File Number 34AX04000619 AM24 Licence No and Date 3411004335/09/11/2023 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 22.12.2024, as under:
Export Item 1. LM 65.4 P3 PJ ROOT 87.0 NUMBERS (NOS) 2 LM 12.0 P3 PJ TIP 87.0 NUMBERS (NOS) TOTAL Net weight per Blade (ROOT AND TIP TOGETHER) 21,683.0 Kg +/- 3 % Import item SL. NO SL.NO OF ADV.AUTH. QTY 1 24,33,34,35,36,41,42,43,95,96,97,98,99,153,160,161,162,163,164,165,166, 167,168,169,170,172,173,174,175,176,177,178,179,180,181,182,183,184,185, 186,187,188,189,190,191,194,195,213,219,220,221,222,246,248,251,252,269, 270,271,273,274. Components, allowed as per G.N.4 2. 1,2,3,4,5,6,7,8,9,10,17,18,19,20,21,22,23,25,26,32,37,38,113,114,115,116, 152,154,207,209,210,211,223,243,245,249,250,255,256,257,258,259,260,261, 264,267. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3. Rest of the items As applied for
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3. Rest of the items As applied for
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
33
Case No. 60 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007232AM24 RA File Number 05AX04002773 AM24 Licence No and Date 0511022504/06/12/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 09.09.2024
Case No. 61 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007491AM24 RA File Number 31AX04000256 AM24 Licence No and Date 3111002919/20/12/2023
Case No. 62 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
3
Case No. 62 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
34 HQ File Number HQRNORM APPLY 00007522AM24 RA File Number 09AX04000829 AM24 Licence No and Date 0911006406/21/12/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 02.05.2024
Case No. 63 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004484AM25 RA File Number 05AX04003266 AM24 Licence No and Date 0511023360/19/01/2024 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL NO EXPORT ITEM QUANTITY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED 1 FURNACE PARTS FOR GAS BURNERS.
42.00 MTS
LRGO BURNERS GAS BURNERS EACH LRGO (800 SETS) (FOC)
1.02 KG/KG OF THE WEIGHT OF CASTINGS IN THE EXPORT PRODUCT.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
LRGO BURNERS GAS BURNERS EACH LRGO (800 SETS) (FOC)
1.02 KG/KG OF THE WEIGHT OF CASTINGS IN THE EXPORT PRODUCT.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
35 NOTE: THE ITEM OF IMPORT WILL BE CLUBBED WITH AA NO 511021804 DATED 30.12.2023. EXPORT TO BE COMPLETED.
Case No. 64 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008091AM24 RA File Number 31AX04000294 AM24 Licence No and Date 3111003013/22/01/2024
Case No. 65 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008682AM24 RA File Number 03AX04004509 AM24 Licence No and Date 0311031372/21/02/2024
Case No. 66 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ase No. 66 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
36 HQ File Number HQRNORM REVIW00004520AM25 RA File Number 05AX04003818 AM24 Licence No and Date 0511024218/29/02/2024 hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 67 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008842AM24 RA File Number 34AX04000910 AM24 Licence No and Date 3411004666/01/03/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 22.12.2024, as under:
Export Item FRP ROTAR BLADE LM 77.4 P6 30 NOS Net weight per BLADE 21,854.0 Kg +/- 3 % Import item SL. NO SL.NO OF ADV.AUTH. QTY 1 2,3,4,5,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,44,45,46, 59,66,67,68,69,70,131,132,133,139,140,143,144,145,146. Components, allowed as per G.N.4 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
7,18,19,20,21,22,23,24,25,26,27,44,45,46, 59,66,67,68,69,70,131,132,133,139,140,143,144,145,146. Components, allowed as per G.N.4 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
37 2. 39,40,41,42,43,47,48,71,128,129,142. Consumables Qty as applied for Value altogether restricted to 1.0 % of FOB Value 3. Rest of the items As applied for
Case No. 68 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004236AM25 RA File Number 34AX04000912 AM24 Licence No and Date 3411004667/01/03/2024 hoc norms as per comments of Consultant (Tech-1) dated 22.12.2024, as under:
Export Item - FRP ROTAR BLADE LM 75.7 P2 78 NOS Net weight per BLADE - 17,363.0 Kg +/- 3 % Import item- SL. NO SL.NO OF ADV.AUTH. QTY 1 6,7,8,9,10,11,12,13,14,15,20,21,22,23,24,25,26,27,28,36,37,38,39,50,51,52, 53,71,72,73,77,82,83,84,85,86,97,98,99,130,131,138,139,142,143,144,147, 154. Components, allowed as per G.N.4 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
6,37,38,39,50,51,52, 53,71,72,73,77,82,83,84,85,86,97,98,99,130,131,138,139,142,143,144,147, 154. Components, allowed as per G.N.4 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
38 2. 46,47,48,49,58,59,65,67,70,89,90,91,92,129,141,151,152,153. Consumables Qty as applied for Value altogether restricted to 3.0 % of FOB Value 3. Rest of the items As applied for
Case No. 69 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00008981AM24 RA File Number 09AX04001098 AM24 Licence No and Date 0911006891/08/03/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024
Case No. 70 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009223AM24 RA File Number 06AX04000359 AM24 Licence No and Date 0611002572/20/03/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00009223AM24 RA File Number 06AX04000359 AM24 Licence No and Date 0611002572/20/03/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
39
Case No. 71 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009228AM24 RA File Number 06AX04000355 AM24 Licence No and Date 0611002573/20/03/2024
Case No. 72 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009229AM24 RA File Number 06AX04000349 AM24 Licence No and Date 0611002574/20/03/2024
Case No. 73 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009231AM24 RA File Number 06AX04000357 AM24 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
OSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009231AM24 RA File Number 06AX04000357 AM24 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
40 Licence No and Date 0611002576/20/03/2024
Case No. 74 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000109AM25 RA File Number 34AX04000957 AM24 Licence No and Date 3411004769/05/04/2024 Consultant (Tech-1) dated 22.12.2024, as under:
Export Item FRP ROTAR BLADE LM 47.6 P2 12 NOS Net weight per BLADE 8428.0 Kg +/- 3 % Import item SL. NO SL.NO OF ADV.AUTH. QTY 1 1,2,4,6,8,42,43,48,49,50,52,54,65. Components, allowed as per G.N.4 2. 16,18,19,47,69. Consumables Qty as applied for Value altogether restricted to 1.0 % of FOB Value 3. Rest of the items As applied for
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
,47,69. Consumables Qty as applied for Value altogether restricted to 1.0 % of FOB Value 3. Rest of the items As applied for
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
41
Case No. 75 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004521AM25 RA File Number 05AX04000080 AM25 Licence No and Date 0511025010/16/04/2024 hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 76 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000302AM25 RA File Number 09AX04000019 AM25 Licence No and Date 0911007086/18/04/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
42
Case No. 77 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000303AM25 RA File Number 09AX04000020 AM25 Licence No and Date 0911007087/18/04/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
Case No. 78 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000443AM25 RA File Number 09AX04000033 AM25 Licence No and Date 0911007151/26/04/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024
M APPLY 00000443AM25 RA File Number 09AX04000033 AM25 Licence No and Date 0911007151/26/04/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
43
Case No. 79 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GMM PFAUDLER LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000460AM25 RA File Number 03AX04000247 AM25 Licence No and Date 0311033413/29/04/2024 DL issued on 18.12.2024, reply is awaited from the applicant.
Case No. 80 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ABLE ENGINEERING COMPANY Meeting Number and Date HQ File Number HQRNORM APPLY 00000489AM25 RA File Number 32AX04000055 AM25 Licence No and Date 3211006701/30/04/2024
Case No. 81 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SATURN INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00000557AM25 RA File Number 07AX04000169 AM25 Licence No and Date 0711011230/06/05/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00000557AM25 RA File Number 07AX04000169 AM25 Licence No and Date 0711011230/06/05/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
44 The committee considered the case as per agenda and noted that a deficiency letter dated 09.10.2024
Case No. 82 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name NIRMAL OVERSEAS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003379AM25 RA File Number 05AX04000242 AM25 Licence No and Date 0511025551/15/05/2024 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED SEAMLESS PIPE 1.02% ON THE NET WEIGHT OF SEAMLESS TUBES IN THE EXPORT PRODUCT PCB CARD NET TO NET UNDER GN-4 WITH BEARING NET TO NET UNDER GN-4 WITH THYRISTOR NET TO NET UNDER GN-4 WITH CONTACTOR NET TO NET UNDER GN-4 WITH 1 SLITTING LINE MACHINE (MADE BY IMPORT ITEM S.NO 1. SEAMLESS PIPE,2 PCBCARD,3. BEARING,4. THYRISTOR,5CONTACTOR,6. RELAY,7. MCCB, 8. SLITTING CUTTER AND SOME INDIGENOUS ITEMS) 1 SET UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
S PIPE,2 PCBCARD,3. BEARING,4. THYRISTOR,5CONTACTOR,6. RELAY,7. MCCB, 8. SLITTING CUTTER AND SOME INDIGENOUS ITEMS) 1 SET UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
45 RELAY NET TO NET UNDER GN-4 WITH MCCB NET TO NET UNDER GN-4 WITH SLITTING CUTTER NET TO NET UNDER GN-4 WITH
NOTE: THE SIZE AND GRADE OF IMPORTED SEAMLESS PIPE SHOULD BE MATCHED WITH THE SIZE AND GRADE OF SEAMLESS PIPES IN THE EXPORT PRODUCT.
Case No. 83 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000844AM25 RA File Number 05AX04000554 AM25 Licence No and Date 0511025666/21/05/2024
Case No. 84 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ORBIZ AUTOMOTIVEZ Meeting Number and Date HQ File Number HQRNORM APPLY 00000845AM25 RA File Number 10AX04000042 AM25 Licence No and Date 1011002457/22/05/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00000845AM25 RA File Number 10AX04000042 AM25 Licence No and Date 1011002457/22/05/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
46 The Committee considered the case as per agenda and decided to give final chance to the applicant for attending PH along with relevant documents and samples in the forthcoming meeting.
Case No. 85 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000856AM25 RA File Number 05AX04000541 AM25 Licence No and Date 0511025676/22/05/2024
Case No. 86 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000886AM25 RA File Number 09AX04000119 AM25 Licence No and Date 0911007293/24/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ate 0911007293/24/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
47
Case No. 87 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000922AM25 RA File Number 09AX04000125 AM25 Licence No and Date 0911007303/27/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
Case No. 88 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000923AM25 RA File Number 09AX04000120 AM25 Licence No and Date 0911007306/27/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
48
Case No. 89 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name NORDEX INDIA MANUFACTURING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000981AM25 RA File Number 07AX04000316 AM25 Licence No and Date 0711011415/29/05/2024
Material Balance Sheet to arrive for the weight of Export Product. i.
and Date HQ File Number HQRNORM APPLY 00000981AM25 RA File Number 07AX04000316 AM25 Licence No and Date 0711011415/29/05/2024
Material Balance Sheet to arrive for the weight of Export Product. i.
Case No. 90 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BANGALORE VALVES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000982AM25 RA File Number 07AX04000296 AM25 Licence No and Date 0711011417/29/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 09.10.2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
49
Case No. 91 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000987AM25 RA File Number 09AX04000117 AM25 Licence No and Date 0911007325/29/05/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 21.08.2024
Case No. 92 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SOLCO BIOMEDICAL CO. INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000989AM25 RA File Number 08AX04000276 AM25 Licence No and Date 0811011690/29/05/2024 The Committee considered the case as per agenda and decided to give final chance to the applicant for attending PH along with relevant documents and samples in the forthcoming meeting.
Case No. 93 / NC/1/MEET/Dec/202425/18 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
for attending PH along with relevant documents and samples in the forthcoming meeting.
Case No. 93 / NC/1/MEET/Dec/202425/18 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
50 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001211AM25 RA File Number 34AX04000211 AM25 Licence No and Date 3411005026/10/06/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 22.12.2024, as under:
Export Item FRP ROTAR BLADE LM 75.7 P2 66 NOS Net weight per BLADE 17,363.0 Kg +/- 3 % Import item SL. NO SL.NO OF ADV.AUTH. QTY 1 6,7,8,9,10,11,12,13,14,15,20,21,22,23,24,25,26,27,28,36,37,38,39,50,51,52,53 71,72,73,77,82,83,84,85,86,97,98,99,130,131,138,139,142,143,144,147,154. Components, allowed as per G.N.4 2. 46,47,48,49,58,59,65,67,70,89,90,91,92,129,141,151,152,153. Consumables Qty as applied for Value altogether restricted to 4.0 % of FOB Value 3. Rest of the items As applied for
Case No. 94 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name AVON NEWAGE CYCLES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004425AM25 RA File Number 30AX04000141 AM25 Licence No and Date 3011005346/21/06/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
ber and Date HQ File Number HQRNORM REVIW00004425AM25 RA File Number 30AX04000141 AM25 Licence No and Date 3011005346/21/06/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
51 DPIIT dated 19.12.2024, as under:
Note: The written recommendation as given by DPIIT will be communicated to the concerned RA through email.
Case No. 95 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004427AM25 RA File Number 30AX04000144 AM25 Licence No and Date 3011005347/21/06/2024
RA through email.
Case No. 96 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004430AM25 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
52 RA File Number 30AX04000142 AM25 Licence No and Date 3011005348/21/06/2024
RA through email.
Case No. 97 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004433AM25 RA File Number 30AX04000140 AM25 Licence No and Date 3011005349/21/06/2024
RA through email.
Case No. 98 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
d Date 3011005349/21/06/2024
RA through email.
Case No. 98 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
53 Meeting Number and Date HQ File Number HQRNORM REVIW00004434AM25 RA File Number 30AX04000147 AM25 Licence No and Date 3011005350/21/06/2024
RA through email.
Case No. 99 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004435AM25 RA File Number 30AX04000146 AM25 Licence No and Date 3011005351/21/06/2024
RA through email.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
54 Case No. 100 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004437AM25 RA File Number 30AX04000145 AM25 Licence No and Date 3011005352/21/06/2024
RA through email.
Case No. 101 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004438AM25 RA File Number 30AX04000143 AM25 Licence No and Date 3011005353/21/06/2024
RA through email.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Number HQRNORM REVIW00004438AM25 RA File Number 30AX04000143 AM25 Licence No and Date 3011005353/21/06/2024
RA through email.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
55
Case No. 102 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name UPR ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001501AM25 RA File Number 03AX04001315 AM25 Licence No and Date 0311034843/24/06/2024
Case No. 103 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name SPIROTECH HEAT EXCHANGERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001604AM25 RA File Number 05AX04000832 AM25 Licence No and Date 0511026272/27/06/2024 DPIIT dated 17.12.2024, as under:
RA through email.
Case No. 104 / NC/1/MEET/Dec/202425/18 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
56 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001740AM25 RA File Number 09AX04000199 AM25 Licence No and Date 0911007534/04/07/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 23.09.2024
Case No. 105 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GURIT WIND PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002150AM25 RA File Number 04AX04000365 AM25 Licence No and Date 0411007888/26/07/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024
Case No. 106 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred
Date 0411007888/26/07/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024
Case No. 106 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
57 Party Name BIRLA CABLE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002188AM25 RA File Number 56AX04000063 AM25 Licence No and Date 1111000105/29/07/2024
Case No. 107 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SULZER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002216AM25 RA File Number 31AX04000154 AM25 Licence No and Date 3111003745/30/07/2024
Case No. 108 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002375AM25 RA File Number 03AX04002142 AM25 Licence No and Date 0311036160/07/08/2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
and Date HQ File Number HQRNORM APPLY 00002375AM25 RA File Number 03AX04002142 AM25 Licence No and Date 0311036160/07/08/2024
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
58
Case No. 109 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002404AM25 RA File Number 03AX04002141 AM25 Licence No and Date 0311036192/08/08/2024
Case No. 110 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002421AM25 RA File Number 30AX04000227 AM25 Licence No and Date 3011005576/09/08/2024
RA through email.
Case No. 111 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name VICTORA AUTO PRIVATE LIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
59 Meeting Number and Date HQ File Number HQRNORM APPLY 00002476AM25 RA File Number 05AX04001460 AM25 Licence No and Date 0511027126/12/08/2024 MHI dated 19.12.2024, as under:
RA through email.
Case No. 112 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name UPR ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002513AM25 RA File Number 03AX04002082 AM25 Licence No and Date 0311036334/13/08/2024
Case No. 113 / NC/1/MEET/Dec/202425/18 Case Status Case Rejected Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002538AM25 RA File Number 07AX04000762 AM25 Licence No and 0711012058/14/08/2024
tus Case Rejected Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002538AM25 RA File Number 07AX04000762 AM25 Licence No and 0711012058/14/08/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
60 Date The committee considered the case as per agenda and noted that vide mail dated 20.12.2024, the firm has requested for closure of the AA. Hence, the committee decided to close the case showing it as “rejected”.
Case stands rejected.
Case No. 114 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002661AM25 RA File Number 24AX04000219 AM25 Licence No and Date 2411003800/23/08/2024
Case No. 115 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name TEGA INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002754AM25 RA File Number 02AX04000345 AM25 Licence No and Date 0211007177/29/08/2024 As per app 4E wastage is 3 % whereas as per flow chart wastage indicated is 5 %. Hence clarification is required. i. Net content of import item in export without wastage. ii. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
w chart wastage indicated is 5 %. Hence clarification is required. i. Net content of import item in export without wastage. ii. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
61
Case No. 116 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SANAUTO ENGINEERS (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002797AM25 RA File Number 05AX04001674 AM25 Licence No and Date 0511027481/02/09/2024 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:
Details of parts of the Universal joint Kits to be manufactured from imported item. 1. Complete dimension of import items and export products. 2. Dimension of extremities of export product and their corresponding input blank size. 3. Detail technical note on manufacturing process including the relevant flow sheet. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. The information at S.Nos.4 & 5 should by supported by weight & dimensional drawing at each stage of manufacturing. 6.
complete justification and supported by documentary evidence/drawings etc. 5. The information at S.Nos.4 & 5 should by supported by weight & dimensional drawing at each stage of manufacturing. 6.
Case No. 117 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002830AM25 RA File Number 05AX04001729 AM25 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
62 Licence No and Date 0511027524/03/09/2024
Case No. 118 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002854AM25 RA File Number 05AX04001663 AM25 Licence No and Date 0511027547/04/09/2024 hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL NO EXPORT ITEM QUANTITY IMPORT ITEM & QUANTITY QUANTITY TO BE ALLOWED CARBON STEEL SEAMLESS PIPE 1.02 KGS/KGS ON THE NET WEIGHT OF CARBON STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT. STAINLESS STEEL SEAMLESS PIPES 1.02 KGS/KGS ON THE NET WEIGHT OF STAINLESS-STEEL SEAMLESS PIPES IN THE EXPORT PRODUCT. FLANGES CARBON STEEL NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. FLANGES STAINLESS STEEL NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. PIPE FITTING CARBON STEEL NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. PIPE FITTING STAINLESS STEEL NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1 PARTS CONSISTING PRE-FABRICATED PIPINGS FOR BOILERS. (PARTS CONSISTING PRE-FABRICATED PIPINGS FOR BOILERS.
SE.
PIPE FITTING STAINLESS STEEL
NET TO NET UNDER GN-4 WITH
ACCOUNTABILITY CLAUSE.
1
PARTS
CONSISTING
PRE-FABRICATED
PIPINGS FOR BOILERS.
(PARTS
CONSISTING
PRE-FABRICATED
PIPINGS FOR BOILERS. )
122.961 MTS
UDIN00514406AM25
Digitally Signed.
Deputy DGFT )
Location: DGFT(HQ)
63 H SECTION / WT SECTION 1.02 KGS/KGS ON THE NET WEIGHT OF THE H SECTION / WT SECTION ANGLE, CHANNEL, BEAM IN THE EXPORT PRODUCT.
HARDWARE ITEMS ( CONE SHAPE LOCK NUT, SCREW, AND FINISHED BOLTS, HAX NUT, U BOLT, AND WELD EYE NIT) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.
NOTE: THE GRADES AND SIZES OF THE IMPORTED PIPES, PLATES, H SECTION/WT SECTION, FITTINGS AND TEMPERATURE GAUGE SHOULD BE MATCHED WITH THE GRADES AND SIZES OF PIPES, PLATES, H SECTION/WT SECTION, FITTINGS, AND TEMPERATURE GAUGE IN THE EXPORT PRODUCT.
Case No. 119 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00002885AM25 RA File Number 09AX04000446 AM25 Licence No and Date 0911007878/06/09/2024 Details of import items, Shape, Size (Dimension) and surface condition with density of material. i. Justification of wastage supported by weight at each stage of manufacturing, ii. Dimension of final export product, iii.
, Shape, Size (Dimension) and surface condition with density of material. i. Justification of wastage supported by weight at each stage of manufacturing, ii. Dimension of final export product, iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. GST Invoice of scrap disposal. v.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
64
Case No. 120 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002910AM25 RA File Number 24AX04000233 AM25 Licence No and Date 2411003834/06/09/2024
Case No. 121 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ENEROIL OFFSHORE DRILLING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002962AM25 RA File Number 05AX04001812 AM25 Licence No and Date 0511027654/10/09/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024
Case No. 122 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
24
Case No. 122 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
65 Meeting Number and Date HQ File Number HQRNORM APPLY 00003116AM25 RA File Number 34AX04000487 AM25 Licence No and Date 3411005411/18/09/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant (Tech-1) dated 22.12.2024, as under:
Export Item LM 65.4 P3 PJ ROOT - 51NO
LM 12.0 P3 PJ TIP - 51 NO
TOTAL WEIGHT - 21,683.0 Kg +/- 3 %
Import item
SL.
NO
SL.NO OF ADV.AUTH.
QTY
1
4,6,7,10,11,14,18,19,20,21,32,33,47,56,64,88,89,90,109,143,144,147,148,149,
150,152,153,154,155,162,163,164,166,167,168,169,170,171,172,173,174,175,
176,177,178,179,180,181,184,185,201,214,220,221,222,225,226.
Components, allowed as per G.N.4
2.
13,31,39,40,62,80,81,82,83,84,98,146,151,198,199.
Consumables Qty as applied for Value
altogether restricted to 1.0 % of FOB Value
3.
Rest of the items
As applied for
Case No. 123 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BHOLA ENGINEERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003486AM25 RA File Number 03AX04003301 AM25 Licence No and 0311037661/04/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Number and Date HQ File Number HQRNORM APPLY 00003486AM25 RA File Number 03AX04003301 AM25 Licence No and 0311037661/04/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
66 Date SUBMIT A COLOURED DRAWING OF EACH EXPORT PRODUCT UNDER AA AND INDICATE THE REQUIREMENT OF COMPONENTS ON NET-TO-NET BASIS. 1. WHAT PARTS WILL BE MANUFACTURED IN THE FACTORY AND WHAT PROCESS AND WASTAGE ARE INVOLVED? 2. INDICATE THE INDIGENOUS PARTS MANUFACTURED AND REQUIRED IN THE EXPORT PRODUCTS. 3. SUBMIT AN EXCEL SHEET INDICATING IMPORTED COMPONENTS AND INDIGENOUS PARTS USING RAW MATERIAL AND WASTAGE THEREOF. 4.
Case No. 124 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003533AM25 RA File Number 07AX04001096 AM25 Licence No and Date 0711012510/08/10/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-3) dated 21.12.2024, as under:
Against Export Product at S.Nos.1 to 5, the weight may be added as under:- i. 1- 55.63 kg., 2-7.43 kg., 3-134.9 kg., 4-5.56 kg., 5-35.87 kg. The quantity of import items may be allowed as under:- ii. 1- 278 kg, 2- 141 kg., 3- 607 kg., 4- 61 kg., 5- 215 kg. Grade of import item will be same as used in EP.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
owed as under:- ii. 1- 278 kg, 2- 141 kg., 3- 607 kg., 4- 61 kg., 5- 215 kg. Grade of import item will be same as used in EP.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
67
Case No. 125 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003535AM25 RA File Number 07AX04001101 AM25 Licence No and Date 0711012511/08/10/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-3) dated 21.12.2024, as under:
Against Export Product at S.Nos.1 to 6, the weight may be added as under:- i. 1-3.13 kg., 2-2.88 kg., 3-35.58 kg., 4-90.03 kg., 5-193.58 kg., 6-36.04 kg. The quantity of import items may be allowed as under:- ii.
1- 35 kg., 2- 32 kg., 3- 285 kg., 4- 1170 kg., 5- 1260 kg., 6- 432 kg.
Grade of import item will be same as used in EP.
Case No. 126 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003547AM25 RA File Number 07AX04001106 AM25 Licence No and Date 0711012521/08/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00003547AM25 RA File Number 07AX04001106 AM25 Licence No and Date 0711012521/08/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
68
Case No. 127 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name CASCY FORGE INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003553AM25 RA File Number 04AX04000635 AM25 Licence No and Date 0411008368/09/10/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(SKB) dated 21.12.2024, as under:
SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED 1 BALANCING SLEEVE -CFP-5603- 2533 121724 NOS (1558.00 KGS) ROUND WIRE 11.70/11.75 MM ATTRIBUTE. GRADE: ENAW6061 H12 1.11 KG/KG ON THE NET WEIGHT OF THE EXPORT PRODUCT.
NOTE: THE GRADE OF IMPORTED ITEM SHOULD BE MATCHED WITH THE GRADE OF THE ITEM OF EXPORT.
Case No. 128 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name TEMA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003554AM25 RA File Number 03AX04003332 AM25 Licence No and Date 0311037764/09/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00003554AM25 RA File Number 03AX04003332 AM25 Licence No and Date 0311037764/09/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
69
Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. i. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. ii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iii.
components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iii.
Case No. 129 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name GALVA DECO PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003560AM25 RA File Number 52AX04000202 AM25 Licence No and Date 5211010197/09/10/2024 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE: Wastage in application and appendix 4E of the CE certificate is stated as NIL; however, wastage is being shown in the supporting documents detailing the manufacturing process. Clarification thereof. a. What is net weight of import item contained in Export Product? b. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. c. The information at S.No.C above should be furnished, indicating indigenous input. d. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
license, if any, may also be indicated. c. The information at S.No.C above should be furnished, indicating indigenous input. d. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
70
Case No. 130 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003562AM25 RA File Number 31AX04000236 AM25 Licence No and Date 3111003956/09/10/2024
Case No. 131 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name L&T - MHI POWER BOILERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003576AM25 RA File Number 03AX04003413 AM25 Licence No and Date 0311037798/09/10/2024
Case No. 132 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM25 RA File Number 03AX04003381 AM25 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM25 RA File Number 03AX04003381 AM25 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
71 Licence No and Date 0311037807/10/10/2024 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. i. Weight of each Export Product. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. Sheet layout diagram of the material indicating the wastage during blanking, v. Quantity of import items in Nos. also in addition to their weights. vi.
ed by documentary evidence/drawings etc. iv. Sheet layout diagram of the material indicating the wastage during blanking, v. Quantity of import items in Nos. also in addition to their weights. vi.
Case No. 133 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003651AM25 RA File Number 05AX04002215 AM25 Licence No and Date 0511028320/15/10/2024 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. i. Weight of each Export Product. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. Quantities of import items at Sl. No. 3 & 6 in Nos. also in addition to their weight. v. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
documentary evidence/drawings etc. iv. Quantities of import items at Sl. No. 3 & 6 in Nos. also in addition to their weight. v. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
72 Justification/basis for the quantities of welding materials supported by following information; vi.
Weight of steel, which requires imported welding materials, giving break-up of: i.
Steel Plates/Sheets upto 30 mm thickness. 1. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. 2. Steel Plates/Sheets more than 70 mm thickness. 3. Others e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.
Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. ii.
Case No. 134 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003666AM25 RA File Number 03AX04003512 AM25 Licence No and Date 0311037961/16/10/2024
Case No. 135 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name FLENDER DRIVES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003692AM25 RA File Number 03AX04003455 AM25 Licence No and 0311038009/17/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Number and Date HQ File Number HQRNORM APPLY 00003692AM25 RA File Number 03AX04003455 AM25 Licence No and 0311038009/17/10/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
73 Date
Case No. 136 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name FLENDER DRIVES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003693AM25 RA File Number 03AX04003456 AM25 Licence No and Date 0311038010/17/10/2024
Case No. 137 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003700AM25 RA File Number 05AX04002212 AM25 Licence No and Date 0511028360/17/10/2024 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. i. Weight of each Export Product. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.
Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
74 Justification/basis for the quantities of welding materials supported by following information; v.
Weight of steel, which requires imported welding materials, giving break-up of: i.
Steel Plates/Sheets upto 30 mm thickness. 1. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. 2. Steel Plates/Sheets more than 70 mm thickness. 3. Others e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.
Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. ii.
s e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.
Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. ii.
Case No. 138 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LARSEN AND TOUBRO LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003758AM25 RA File Number 03AX04003595 AM25 Licence No and Date 0311038114/21/10/2024
Case No. 139 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name VICTORA AUTO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003987AM25 RA File Number 05AX04002499 AM25 Licence No and 0511028731/05/11/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
75 Date The Committee considered the case as per agenda decided to fix the ad-hoc norms as per comments of MHI dated 20.12.2024, as under:
RA through email.
Case No. 140 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name PENGUIN PETROLEUM SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004003AM25 RA File Number 03AX04003908 AM25 Licence No and Date 0311038502/06/11/2024
Case No. 141 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004005AM25 RA File Number 07AX04001232 AM25 Licence No and Date 0711012715/06/11/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00004005AM25 RA File Number 07AX04001232 AM25 Licence No and Date 0711012715/06/11/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
76
Case No. 142 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004006AM25 RA File Number 07AX04001155 AM25 Licence No and Date 0711012716/06/11/2024
Case No. 143 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004098AM25 RA File Number 07AX04001278 AM25 Licence No and Date 0711012776/13/11/2024
Case No. 144 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004205AM25 RA File Number 07AX04001308 AM25 Licence No and Date 0711012808/18/11/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
77
Case No. 145 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name BIRLA PRECISION TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004246AM25 RA File Number 03AX04004074 AM25 Licence No and Date 0311038853/20/11/2024
Case No. 146 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004268AM25 RA File Number 05AX04002767 AM25 Licence No and Date 0511029083/21/11/2024 1.
tus Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004268AM25 RA File Number 05AX04002767 AM25 Licence No and Date 0511029083/21/11/2024
- Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
- Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
- Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly.
- Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
sed in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
78 their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9.
port Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.
Case No. 147 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004269AM25 RA File Number 05AX04002769 AM25 Licence No and Date 0511029085/21/11/2024
- Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
- Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
- Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included.
s, and outputs involved in manufacturing the export product. 3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
79 materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7.
oposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.
Case No. 148 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024 The Committee considered the case as per agenda and decided to refer the case to Meity for examination and comments.
5AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024 The Committee considered the case as per agenda and decided to refer the case to Meity for examination and comments.
Case No. 149 / NC/1/MEET/Dec/202425/18 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
80 Case Status Case Deferred Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004285AM25 RA File Number 03AX04004121 AM25 Licence No and Date 0311038925/22/11/2024 The Committee considered the case as per agenda and decided to refer the case to DPIIT for examination and comments.
Case No. 150 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SPIROTECH HEAT EXCHANGERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004298AM25 RA File Number 05AX04002791 AM25 Licence No and Date 0511029121/22/11/2024 Quantity of export items namely, Condensor Coils & Evaporator Coils in Nos. also in addition to their weights. i. Weight of each Export Product. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.
Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
81
Case No. 151 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name ASHOKA FOUNDRY AND EQUIPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004312AM25 RA File Number 02AX04000530 AM25 Licence No and Date 0211007642/22/11/2024 The Committee considered the case as per agenda decided to fix the ad-hoc norms as per comments of MHI dated 19.12.2024, as under:
RA through email.
Case No. 152 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name AMEYA PRECISION ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004351AM25 RA File Number 31AX04000272 AM25 Licence No and Date 3111004120/26/11/2024 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 21.12.2024. It has been noted that % wasted recommended in the written comments is on higher side.
24 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 21.12.2024. It has been noted that % wasted recommended in the written comments is on higher side. Hence, the Committee decided to discuss it further in the forthcoming meeting.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
82
Case No. 153 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SHELCEL BIOZEEN TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004375AM25 RA File Number 07AX04001296 AM25 Licence No and Date 0711012902/27/11/2024
- Submit a detailed description of the manufacturing process covering each step from raw material acquisition to final product assembly. An accompanying flow sheet must illustrate the process visually, outlining key stages, inputs, and outputs involved in the manufacturing process.
- Submit detailed technical drawings of the export product. These drawings should specify the components integrated into the final product and demonstrate their arrangement and integration within the overall assembly.
- Submit an Excel sheet of weights for both imported and indigenous inputs. Each product should specify the net weight (gross weight minus wastage) of all input materials used in the export product.
- Submit assembly diagrams, which could facilitate understanding of the assembly process which includes assembly diagrams that illustrate the placement and precise usage of each component.
oduct.
4. Submit assembly diagrams, which could facilitate understanding of the assembly process which includes
assembly diagrams that illustrate the placement and precise usage of each component. These diagrams serve
as a visual guide to demonstrate how individual parts converge to form the complete product.
5. Submit the purpose and application of the products.
6. Submit the Advance Authorization Nos and Dates, if obtained in the past from the Regional Licensing
Authority and those ratified by the NORMS Committee for the same export product.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
83 Case No. 154 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00004439AM25 RA File Number 07AX04001348 AM25 Licence No and Date 0711012929/29/11/2024
Case No. 155 / NC/1/MEET/Dec/202425/18 Case Status Case Approved Party Name DOOWON CLIMATE CONTROL INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004501AM25 RA File Number 04AX04000817 AM25 Licence No and Date 0411008645/02/12/2024 Consultant(SKB) dated 21.12.2024, as under:
Note: The written recommendation as given by Consultant (SKB) will be communicated to the concerned RA through email.
Case No. 156 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name VINDHYA TELELINKS LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Case No. 156 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name VINDHYA TELELINKS LIMITED Meeting Number and Date UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
84 HQ File Number HQRNORM APPLY 00004502AM25 RA File Number 56AX04000172 AM25 Licence No and Date 5611003448/02/12/2024
Case No. 157 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004518AM25 RA File Number 31AX04000303 AM25 Licence No and Date 3111004156/03/12/2024
Case No. 158 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name LECHLER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024 The Committee considered the case as per agenda and decided to refer the case to DPIIT for examination and comments.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
2/2024 The Committee considered the case as per agenda and decided to refer the case to DPIIT for examination and comments.
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
85
Case No. 159 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name POWERDRIVE BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004524AM25 RA File Number 08AX04001424 AM25 Licence No and Date 0811013397/04/12/2024 Submit drawings of the export item 1 TO 14 1. Detail process of manufacturing of the items to be manufactured out of the imported items. 2. Process flow chart and wastage at each stage of operation out of the imported items. 3. What is the grade of steel to be imported and the chemical composition thereof? Submit Mill Test Certificate. 4. Where is the application of the export products? 5. Reasons for higher wastage in detail. 6.
Case No. 160 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name POWERDRIVE BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004525AM25 RA File Number 08AX04001394 AM25 Licence No and Date 0811013398/04/12/2024 Submit drawings of the export item 1 TO 2. 1. Detail process of manufacturing of the items to be manufactured out of the imported items. 2. Process flow chart and wastage at each stage of operation out of the imported items. 3. What is the grade of steel to be imported and the chemical composition thereof? Submit Mill Test Certificate. 4. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
rted items. 3. What is the grade of steel to be imported and the chemical composition thereof? Submit Mill Test Certificate. 4. UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
86 Where is the application of the export products? 5. Reasons for higher wastage in detail. 6.
Case No. 161 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name POWERDRIVE BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004526AM25 RA File Number 08AX04001425 AM25 Licence No and Date 0811013399/04/12/2024 Submit drawing of the export item 1 &2 1. Detail process of manufacturing of the items to be manufactured out of the imported items. 2. Process flow chart and wastage at each stage of operation out of the imported items. 3. What is the grade of steel to be imported and the chemical composition thereof? 4. Where is the application of the export products? 5. What is the total weight of the export items 1 &2? Submit details of the weight of the imported items and the weight, grades, description, and size of the Indigenous inputs, if any. 6.
Case No. 162 / NC/1/MEET/Dec/202425/18 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004569AM25 RA File Number 31AX04000300 AM25 Licence No and Date 3111004162/05/12/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
er and Date HQ File Number HQRNORM APPLY 00004569AM25 RA File Number 31AX04000300 AM25 Licence No and Date 3111004162/05/12/2024 UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
87
Minutes of Offline Cases
Case No.1 M. No. NC/1/MEET/Dec/202425/12 (Offline Cases) dated 23.12.2024 Lic. No. 3411000609 dated 21.05.2021 M/s LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Status of case HQ. No. HQRNORMREVIW00000821AM24 RLA No. 34AA04001725AM22
Subject: Request for fixation of
ad-hoc norms-review case Approved Case history: The Committee considered the case as per agenda and noted that the case was approved by NC in its Meeting dated 31.05.2023. The applicant has, now, mentioned that list of components are not appearing in the approved norms. The applicant has requested for considering it as review case-offline, as they are not able to file review on BO Portal due to technical glitches. The applicant has given the complete information through Email and hard copies. As per order of Chairman, NC-1, the case was listed in the NC meeting held on 23.12.2024. The comments of Consultant (Tech-1) have been received. Decision: The Committee considered the case as per agenda and after due deliberation, the concerned TE expressed that he would be giving written comments on this. Hence, the Committee decided to modify the ad-hoc norms as per comments of Tech-1 dated 26.12.2024, as under: Export Item- 1 LM 65.4 P3 RJ ROOT- 2GE 51.0 NUMBERS (NOS) 2.LM 12.0 P3 RJ TIP GE 51.0 NUMBERS (NOS) TOTAL Net weight per Blade (ROOT AND TIP TOGETHER)- 21,820.0 Kg +/- 3 % Import item: UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
51.0 NUMBERS (NOS) TOTAL Net weight per Blade (ROOT AND TIP TOGETHER)- 21,820.0 Kg +/- 3 % Import item: UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
88 Sl. No. Sl. No. of Advance Authorization Quantity recommended. 1 24,30,36,45,65,66,67,73,74,75,76,77,78,81,83,85,97,99,100,101,102,103,104, 105,107,110,113,115,118,119,120,123,124,130,131,136,137,138,140,144,150, 154,155,156,157,158,160,163,165,167,176,182,186,188,189,190,193,194,195, 196,205,206,209,244,245,246,247,248,250,256,258,259,261,262,263,266,267, 269,270,271,272,273,275,276,277,278,279,288,291,306,307,309,310,311,312, 326,327,340,341,351 Components, allowed as per G.N.4 2. 6,7,17,29,40,41,42,47,48,51,52,71,72,90,106,108,114,116,121,141,143,153, 162,166,168,172,174,175,184,185,191,192,210,211,213,214,215,216,217,218, 219,220,224,225,226,228,240,251,257,290,294,299,304,305,313,314,315,343, 346,347,348,349,350,352,354,355,356,357 Consumables Qty as applied for Value altogether restricted to 2.39 % of FOB Value 3. 197,198,199,200,201,202,203,204,207,208,328,329,330,331,332,333,334, 335,336,337,338,339,342,344 To BE PROCURRED FROM SEZ FOR INVALIDATION for Nil or partial direct import
Rest of the items As applied for Case No.2 M. No. NC/1/MEET/Dec/202425/12 (Offline Cases) dated 23.12.2024 Lic. No. 3411003794 dated 09.06.2023 M/s LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Status of case HQ. No.HQRNORMAPPLY00001452AM24
Subject: Request for fixation of ad-hoc
norms-review case Approved UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
89 RLA No. 34AX04000174AM24 Case history: The Committee considered the case as per agenda and noted that the case is showing as rejected on BO portal due to technical errors. The applicant has requested for considering it as review case-offline, as they are not able to file review on BO Portal due to technical glitches. The applicant has given the complete information through Email and hard copies. As per order of Chairman, NC-1, the case was listed in the NC meeting held on 23.12.2024. The comments of Consultant (Tech-1) have been received. Decision: The Committee considered the case as per agenda and after due deliberation, the concerned TE expressed that he would be giving written comments on this. Hence, the Committee decided to fix the ad- hoc norms as per comments of Tech-1 dated 26.12.2024, as under: Export Item FRP ROTAR BLADE LM 78.3 P 18 NOS Net weight per BLADE 24,391.0 Kg +/- 3 % Import item Sl. No. Sl. No. of Advance Authorization Quantity recommended. 1 5,7-11,13,14,19-21,41,82,84-86 Components, allowed as per G.N.4 2. 26-29,42-45 Consumables Qty as applied for Value altogether restricted to 1.5 % of FOB Value 3. Rest of the items As applied for Case No.3 M. No. NC/1/MEET/Dec/202425/12 (Offline Cases) dated 23.12.2024 Lic. No. 3411003797 dated 09.06.2023 M/s LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Status of case HQ.
ems As applied for Case No.3 M. No. NC/1/MEET/Dec/202425/12 (Offline Cases) dated 23.12.2024 Lic. No. 3411003797 dated 09.06.2023 M/s LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Status of case HQ. No. HQRNORMAPPLY00001447AM24
Subject: Request for fixation of ad-hoc
norms-review case Approved UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
90 RLA No. 34AX04000177AM24 Case history: The Committee considered the case as per agenda and noted that the case is showing as rejected on BO portal due to technical errors. The applicant has requested for considering it as review case-offline, as they are not able to file review on BO Portal due to technical glitches. The applicant has given the complete information through Email and hard copies. As per order of Chairman, NC-1, the case was listed in the NC meeting held on 23.12.2024. The comments of Consultant (Tech-1) have been received. Decision: The Committee considered the case as per agenda and after due deliberation, the concerned TE expressed that he would be giving written comments on this. Hence, the Committee decided to fix the ad- hoc norms as per comments of Tech-1 dated 26.12.2024, as under: Export Item- FRP ROTAR BLADE LM 58.7 P 45 NOS Net weight per BLADE- 13,320.0 Kg +/- 3 % Import item: Sl. No. Sl. No. of Advance Authorization Quantity recommended. 1 3,4,6,11,14,52-54,57,64 Components, allowed as per G.N.4 2. 20-23,65,66,69,71,74,75,76 Consumables Qty as applied for Value altogether restricted to 4.0 % of FOB Value 3. Rest of the items As applied for
UDIN00514406AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)
Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.
No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6968 --apply.