IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : dgft@nic.in , Phone Office : 011-23062777

(DES - I SECTION)

MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Nov/202425/17 DATED: 05/12/2024

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Nov/202425/17 dated 05/12/2024 of Norms Committee - I for the year 2024-25 was held on 05/12/2024 under the Chairmanship of HARDEEP SINGH,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Shri R.K. Jaiswal, DO MHI UDIN00498429AM25 This document has been digitally signed by Santosh Kumar Dubey, Deputy DGFT,DGFT(HQ) on 16-Dec-2024. Digitally Signed. Name: Santosh Kumar Dubey( Deputy DGFT ) Date: 16-Dec-2024 12:07:07 Reason: santoshk.dubey@nic.in Location: DGFT(HQ) Signature Not Verified

2 2 Shri S. K. Jain, Consultant DPIIT 3 Shri Shaish Kumar, Consultant (Tech-1) Technical Consultant, DGFT 4 Shri S.K. Bhatnagar, Consultant (SKB) Technical Consultant, DGFT 5 Shri V.C. Agarwal, Consultant (Tech-3) Technical Consultant, DGFT In Attendance: S.No. Name and Designation Department 1 Shri Santosh Kumar Dubey, Dy.DGFT DGFT

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Tech-3) Technical Consultant, DGFT In Attendance: S.No. Name and Designation Department 1 Shri Santosh Kumar Dubey, Dy.DGFT DGFT

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

3 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name MAGELLAN AEROSPACE (TUMKUR) PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Nov/ 202425/ 17 and 05/12/2024 HQ File Number HQRNORM APPLY 00007151AM24 RA File Number NA Licence No and Date NA

Norms Committee Decision:

The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE: Specific description of export items, their quantity in no. & weight. i. Input weight & net weight of each export product. ii. Dimension of input material used for each export product and extremities dimension of each export item. iii. Calculation sheets of proposed import quantity. iv. Stage wise manufacturing wastage supported by dimensional drawing and weight. v.

Case stands deferred.

Case No. 2 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name BHARAT HEAVY ELECTRICALS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004211AM24 RA File Number 092404000450 AM11 Licence No and Date 0910045023/03/01/2011 The Committee considered the case as per agenda and decided to fix the ad-hoc norms as per comments of MHI dated 04.12.2024, as under:

Note: The written recommendation as given by MHI will be communicated to the applicant as well as concerned RA through email.

RA concerned may take suitable consequential action accordingly. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

icated to the applicant as well as concerned RA through email.

RA concerned may take suitable consequential action accordingly. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 3 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004182AM25 RA File Number 039504000231 AM17 Licence No and Date 0310805680/23/06/2016 DPIIT dated 03.12.2024, as under:

Quantity of import items at Sl. No. 1 & 2 may be allowed on net-to-net basis with accountability clause as per GN-4 for Engineering Products. i.

Case No. 4 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005604AM23 RA File Number 039504000820 AM17 Licence No and Date 0310811232/15/02/2017 Case deferred for the comments of TE.

Case No. 5 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

820 AM17 Licence No and Date 0310811232/15/02/2017 Case deferred for the comments of TE.

Case No. 5 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

5 Case Status Case Rejected Party Name BLISS ANAND PRIVATE LIMITED Meeting Number and Date HQ File Number 018005000214AM20 RA File Number 052304000311 AM20 Licence No and Date 0510412485/14/11/2019 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024 followed by several reminders was issued to the applicant for providing certain information/documents.
However, no reply has yet been received. Hence, the committee decided to reject the case with direction to the applicant to pay Custom duty & applicable interest for EODC.

Case stands rejected.

Case No. 6 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NUCON AEROSPACE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003631AM25 RA File Number 092404000409 AM20 Licence No and Date 0910068185/14/11/2019

Case No. 7 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name JOHNSON LIFTS PRIVATE LIMITED Meeting Number and Date HQ File Number 018005000469AM21 RA File Number 042404000202 AM20 Licence No and Date 0410166788/29/05/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

eting Number and Date HQ File Number 018005000469AM21 RA File Number 042404000202 AM20 Licence No and Date 0410166788/29/05/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

6 The Committee considered the case as per agenda and heard the PH given to the firm to explain the case and manufacturing process in detail. S/Shri Rahul Garg, Acct. Officere and Sourav Kumar Sen, Branch Manager attended the PH as representatives of the firm and explained the case. After due deliberation, the Committee asked the firm to submit the complete information in respect the export and import items including details of utilization of PVC material.

Case No. 8 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name GODREJ AND BOYCE MANUFACTURING COMPANY LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002331AM23 RA File Number 018005000474 AM21 Licence No and Date 0310836537/05/06/2020

Case No. 9 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002616AM25 RA File Number 039504000376 AM21 Licence No and Date 0310838403/21/09/2020 DPIIT dated 21.11.2024, as under:

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

REVIW00002616AM25 RA File Number 039504000376 AM21 Licence No and Date 0310838403/21/09/2020 DPIIT dated 21.11.2024, as under:

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

7 Quantity of import items at Sl. No. 1 to 11 may be allowed on net-to-net basis with accountability clause as per GN-4 for Engineering Products. i.

Case No. 10 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AUSA MEDICAL DEVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001688AM25 RA File Number 072404000186 AM21 Licence No and Date 0710117091/05/10/2020 The Committee considered the case as per agenda and heard the PH given to the firm to explain the case, name of the export items and manufacturing process in detail. Shri Rajaram M, Manager attended the PH as representative of the firm and explained the case. After due deliberation, the Committee asked the firm to submit the complete information including correct name of export and import items and item wise wastage with utilization thereof.

Case No. 11 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001691AM25 RA File Number 072404000184 AM21 Licence No and Date 0710117090/05/10/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ber and Date HQ File Number HQRNORM REVIW00001691AM25 RA File Number 072404000184 AM21 Licence No and Date 0710117090/05/10/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 12 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001692AM25 RA File Number 072404000183 AM21 Licence No and Date 0710117089/05/10/2020

Case No. 13 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001693AM25 RA File Number 072404000182 AM21 Licence No and Date 0710117092/05/10/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 14 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001679AM25 RA File Number 072404000185 AM21 Licence No and Date 0710117104/06/10/2020

Case No. 15 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NUCON AEROSPACE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003630AM25 RA File Number 092404000374 AM21 Licence No and Date 0910069307/08/10/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ber and Date HQ File Number HQRNORM REVIW00003630AM25 RA File Number 092404000374 AM21 Licence No and Date 0910069307/08/10/2020 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 16 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name IBCC INDUSTRIES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00068153AM21 RA File Number 08AA04006808 AM21 Licence No and Date 0811000449/22/01/2021 Consultant (SKB) dated 04.12.2024, as under:

Sl. No. Item of Export Quantity in Kgs. and Nos. Item of import and Quantity applied Quantity and wastage to be allowed. 1 PLUG, 3”, H2S 5027 KGS (816 NOS)
LOW ALLOY STEEL ROD- 120MM DIA X210MM (816 - PCS) QTY: 15504 KGS 11009.00 KG, INCLUDING 119% WASTAGE ON THE NET WEIGHT OF THE LOW ALLOY STEEL ROD IN THE EXPORT PRODUCT.
2 GATE, 4.1/16" 10K 2004.00 KGS (175 NOS) STAINLESS STEEL FLAT BAR- 63MM THKX147MM WIDTHX318MM LENGTH (175 - PCS) QTY: 4550 KGS 3707.40 KG, INCLUDING 85% WASTAGE ON THE NET WEIGHT OF THE STAINLESS-STEEL FLAT BAR IN THE EXPORT PRODUCT.
FORGING 2" SEGMENT AISI 4140 SPEC 4003 (5748 - PCS) 5916.39 KG, INCLUDING 119.94% WASTAGE ON THE NET WEIGHT OF THE 3 SEGMENT 2" 1502 H2S 2690.00 (17244 NOS) UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

03 (5748 - PCS) 5916.39 KG, INCLUDING 119.94% WASTAGE ON THE NET WEIGHT OF THE 3 SEGMENT 2" 1502 H2S 2690.00 (17244 NOS) UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

11 QTY: 7529.88 KGS FORGING 2” SEGMENT AISI 4140 IN THE EXPORT PRODUCT.
4 SEGMENT 2" 1502 STD 2328.00 KGS (15120 NOS) FORGING 2"1502 SEGMENT SPEC 4052 STD AISI 4140 (5040 - PCS) QTY: 6602.4 KGS 5177.47 KG, INCLUDING 122.40% WASTAGE ON THE NET WEIGHT OF THE FORGING 2” 1502 SEGMENT IN THE EXPORT PRODUCT.
5 HAMMER UNION - MALE SUB 3" FIG 602 3566.00 KGS 1585 NOS FORGING HAMMER UNION - MALE SUB 3"602 BUTT WELD S80 LOW CARBON SPEC 4112 A350.LF2 H2S (1585 - PCS) QTY: 4913.5 KGS 4464.27 KG, INCLUDING 25.19% WASTAGE ON THE NET WEIGHT OF THE FORGING HAMMER UNION MALE IN THE EXPORT PRODUCT.
6 HAMMER UNION - FEMALE SUB 3" FIG 602 3935.00 KGS (1531 NOS) FORGING HAMMER UNION - FEMALE SUB 3"602 BUTT WELD S80 LOW CARBON SPEC 4112 A350.LF2 H2S (1531 - PCS) QTY: 5664.7 KGS 5481.45 KG, INCLUDING 29.30% WASTAGE ON THE NET WEIGHT OF THE FORGING HAMMER UNION FEMALE IN THE EXPORT PRODUCT.
7 BONNET, 3.1/16" 10K 2523.00 KGS (87 NOS) FORGING 3.1/16"10K GATE VALVE BONNET SPEC 4088 AISI 4130 (87 - PCS) QTY: 4144.68 KGS 3604.10 KG, INCLUDING 42.85% WASTAGE ON THE NET WEIGHT OF THE FORGING FOR GATE VALVE BONNET IN THE EXPORT PRODUCT.

/16"10K GATE VALVE BONNET SPEC 4088 AISI 4130 (87 - PCS) QTY: 4144.68 KGS 3604.10 KG, INCLUDING 42.85% WASTAGE ON THE NET WEIGHT OF THE FORGING FOR GATE VALVE BONNET IN THE EXPORT PRODUCT.
INSERT SET, 3" PLUG VALVE, AL BRZ INSERT 3"PV PART M/C CASTING ALUMN BRONZE SPEC 4015 H2S (851 - PCS) 4629.37 KG, INCLUDING 38.77% WASTAGE ON THE NET 8 3336.00 KGS (851 NOS) UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

QTY: 5276.20 KGS WEIGHTMACHINE CASTING ALUMINIUM BRONZE IN THE EXPORT PRODUCT.
Note: The grade of the items of import should be matched with the grade of the items of export.

Case No. 17 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PUNCH RATNA FASTENERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00085898AM21 RA File Number 05AA04032174 AM21 Licence No and Date 0511001335/17/02/2021

What is the diameter of the imported Non-Alloy Steel Wire?
How many Ball Studs are manufactured in a 1-meter length of wire or 1 kg weight?
Submit a colored drawing with the complete dimensions of the Ball Stud.
Process flow chart, which could indicate wastage at each stage of operation

Case No. 18 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

art, which could indicate wastage at each stage of operation

Case No. 18 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

13 Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002491AM25 RA File Number 07AA04002713 AM22 Licence No and Date 0711001033/05/05/2021

Case No. 19 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002492AM25 RA File Number 07AA04002934 AM22 Licence No and Date 0711001043/06/05/2021

Case No. 20 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

14 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002493AM25 RA File Number 07AA04002729 AM22 Licence No and Date 0711001047/07/05/2021

Case No. 21 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00101137AM22 RA File Number 05AA04018188 AM22 Licence No and Date 0511002839/27/05/2021

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. i. Weight of each Export Product. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated.

ous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. Quantities of import items at Sl. No. 6, 7, 23, 24, 37, 38 & 48 in Nos. also in addition to their weights. v. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

15 Justification/basis for the quantities of welding materials supported by following information; vi.

Weight of steel, which requires imported welding materials, giving break-up of: a.

Steel Plates/Sheets upto 30 mm thickness. i. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. ii. Steel Plates/Sheets more than 70 mm thickness. iii. Others e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. iv.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

s e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. iv.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

Case No. 22 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00121082AM22 RA File Number 09AA04004973 AM22 Licence No and Date 0911001075/22/06/2021

Case No. 23 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name HELVOET RUBBER & PLASTIC TECHNOLOGIES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006478AM24 RA File Number 31AA04020534 AM22 Licence No and 3111000464/19/07/2021 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

16 Date

Case No. 24 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005958AM24 RA File Number 05AA04068540 AM22 Licence No and Date 0511004108/12/08/2021

i. ii. iii. iv. Quantities of import items at Sl. No. 2 to 5, 8, 9, 18 to 21, 24, 25, 34 to 36, 44 to 47, 50, 51, 59 to 62, 65 & 66 in Nos. also in addition to their weights. v. Justification/basis for the quantities of welding materials supported by following information; vi.

Weight of steel, which requires imported welding materials, giving break-up of: a.

Steel Plates/Sheets upto 30 mm thickness. i. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. ii.

f steel, which requires imported welding materials, giving break-up of: a.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case stands deferred

Case No. 25 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005959AM24 RA File Number 05AA04075816 AM22 Licence No and Date 0511004464/03/09/2021

i. ii. iii. iv.

Case No. 26 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name MAGOTTEAUX INDUSTRIES PRIVATE LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00231513AM22 RA File Number 24AA04011898 AM22 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

OTTEAUX INDUSTRIES PRIVATE LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00231513AM22 RA File Number 24AA04011898 AM22 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

18 Licence No and Date 2411001043/29/10/2021 The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024

Case No. 27 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name MAHINDRA DEFENCE SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00256987AM22 RA File Number 05AA04093225 AM22 Licence No and Date 0511006236/18/11/2021 Case deferred for the comments of SCOMET Division.

Case No. 28 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004301AM25 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

and Date HQ File Number HQRNORM REVIW00004301AM25 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 29 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004155AM25 RA File Number 05AA040105406 AM22 Licence No and Date 0511006692/07/12/2021

Reason/justification for review of norms. i. A copy of Norms fixed for the A.A., if any. ii. iii. iv. v. vi. Quantities of import items at Sl. No. 6, 22 & 29 in Nos. also in addition to its weight. vii. Justification/basis for the quantities of welding materials supported by following information; viii.

Weight of steel, which requires imported welding materials, giving break-up of: a.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 30 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002495AM25 RA File Number 07AX04000142 AM22 Licence No and Date 0711002750/30/12/2021

Case No. 31 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name PENGUIN PETROLEUM SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002665AM25 RA File Number 03AX04000231 AM22 Licence No and Date 0311009924/30/12/2021 The Committee considered the case as per agenda and decided to review the case and to fix the ad-hoc norms as per comments of Consultant(Tech-3) dated 02.12.2024, as under: In Export Product (EP), to add weight 58kg./unit containing 46 kg. body made of imported tube. i. In Import- 360 Nos. of each having weight of 58 Kg, but duty free import limited to 354 Nos. on account of recovery from scrap. ii. Note: Grade of item of import will be same as used in EP. Reason for review: NC had rejected the case in its meeting held on 31.10.2022 due to non-availablility of deficient information/documents and applicant filed review thereon.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

its meeting held on 31.10.2022 due to non-availablility of deficient information/documents and applicant filed review thereon.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 32 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002496AM25 RA File Number 07AX04000192 AM22 Licence No and Date 0711002858/11/01/2022

Case No. 33 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name MAGOTTEAUX INDUSTRIES PRIVATE LTD Meeting Number and Date HQ File Number HQRNORM REVIW00008523AM24 RA File Number 24AX04000044 AM22 Licence No and Date 2411001247/11/01/2022

Chemical Composition of each export product and also of the imported items. What are cermet grains? i. Correlation of input with each export item. ii. Catalogue / technical write-up of each export item and engineering diagrams. iii. Flowchart depicting the manufacturing process. iv. Justification on the wastage in inputs. What are the reasons for using High- and low-carbon Ferro Chrome Lignosulfonate ( Ferro Chrome LS) in the charge mix? What are the raw materials in the charge mix and what is their weight? v. Excel sheet which could indicate an item of export, quantity in kgs and total weight of each export item, list of indigenous items in the export product and weight thereof, items of import to be used in each export product and weight thereof inclusive of wastage. vi.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ort product and weight thereof, items of import to be used in each export product and weight thereof inclusive of wastage. vi.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 34 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002497AM25 RA File Number 07AX04000300 AM22 Licence No and Date 0711003072/31/01/2022

Case No. 35 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002498AM25 RA File Number 07AX04000407 AM22 Licence No and Date 0711003293/23/02/2022

Case No. 36 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002499AM25 RA File Number 07AX04000420 AM22 Licence No and Date 0711003297/24/02/2022 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 37 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name RAYCHEM-RPG PRIVATE LIMITED HQ File Number HQRNORM APPLY 00000019AM23 RA File Number 03AX04001880 AM22 Licence No and Date 0311013540/01/04/2022 Consultant (SKB) dated 04.12.2024, as under:

Sl. No. Item of Export Quantity Item of Import Quantity and wastage to be allowed.

Number 03AX04001880 AM22 Licence No and Date 0311013540/01/04/2022 Consultant (SKB) dated 04.12.2024, as under:

Sl. No. Item of Export Quantity Item of Import Quantity and wastage to be allowed. 1 C16 ELEMENT BODY 3_9220_0626_MK_C16A2_30T, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 3045.00 KGS RD 50.5 DIN7527 1.4545 STAINLESS-STEEL, STAINLESS-STEEL ROUND BAR DIN1.4545 (EN 10088-3, TOLERANCE IT K15) 4902.45 KG INCLUSIVE OF 61% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
2 C16 ELEMENT BODY 3_9220_0626_MK_C16A3_30T, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 4592.50 KGS

RD 50.5 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 6532.83 KG INCLUSIVE OF 42.25% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
C16 ELEMENT BODY 3_9220_0627_MK_C16A2_40T, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR RD 50.5 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND 5305.10 KG INCLUSIVE OF 50.18% WASTAGE ON THE NET 3 3532.5 KGS

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

5 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND 5305.10 KG INCLUSIVE OF 50.18% WASTAGE ON THE NET 3 3532.5 KGS

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

24 WEIGHING MACHINE TOLERANCE IT K15) WEIGHT OF THE EXPORT ITEM.
4 C16 ELEMENT BODY 3_9220_0898_MK _C16A3_20T, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 3080.00 KGS RD 50.5 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 4704.70 KG INCLUSIVE OF 52.75% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
5 3-9220.2308-1E ST . BODY ,? I/RPG, CN POLISH PW27A/10KG DOUBLE SOLUTION ANNEALING AND SUB-ZERO, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 565.00 KGS RD 41 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 1263.06 KG INCLUSIVE OF 123.55% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
6 3-9220.0737 ST. BODY, I/HBG, WAIT POLISH PW25/10KG DOUBLE SOLUTION ANNEALING AND SUB-ZERO, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 594.00 KGS RD 41 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 1628.57 KG INCLUSIVE OF 174.17% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
7 3-9220.0738 ST.

594.00 KGS RD 41 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 1628.57 KG INCLUSIVE OF 174.17% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
7 3-9220.0738 ST. BODY, I/HBG, WAIT POLISH PW25/20KG DOUBLE SOLUTION ANNEALING AND SUB-ZERO, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE 490.50 KGS RD 41 DIN7527 1.4545 STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) 1333.28 KG INCLUSIVE OF 171.82% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
8 3-9220.2309-1E ST. BODY, I/RPG, 490.20 KGS RD 41 DIN7527 1.4545 1086.97 KG UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

25 CN POLISH PW27A/20KG DOUBLE SOLUTION ANNEALING AND SUB-ZERO, MACHINED PART, USED FOR STRAIN MEASUREMENT FOR WEIGHING MACHINE STAINLESS STEEL, STAINLESS STEEL ROUND TOLERANCE IT K15) INCLUSIVE OF 121.74% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
Note: The grade of the imported stainless steel should match the grade of the stainless steel in the export product.

INCLUSIVE OF 121.74% WASTAGE ON THE NET WEIGHT OF THE EXPORT ITEM.
Note: The grade of the imported stainless steel should match the grade of the stainless steel in the export product.

Case No. 38 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WEST COAST PAPER MILLS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002581AM25 RA File Number 07AX04000553 AM22 Licence No and Date 0711003637/06/04/2022

Case No. 39 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name WORTHY ENGINEERING HQ File Number HQRNORM APPLY 00001058AM23 RA File Number 07AX04000265 AM23 Licence No and Date 0711004123/30/05/2022 Consultant (SKB) dated 04.12.2024, as under: UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Sl. No.
Item of Export Quantity Item of Import Wastage to be allowed.
1 FORMWORK PRECAST MOULD (174.510 MTS. NET CONTENT OF TMT/HTD BARS MADE OF MILD STEEL ROUND IS (174.510.000 KGS.) IN EXPORT)

174.51 MTS TMT BARS - 16MM (HTD BAR 16MM X 6M LENGTH STEEL BAR-MS) 146-2014 MADE OF MILD STEEL (MS) ROUND)

1.02KG/KG ON THE NET WEIGHT OF 16 MM TMT MILD STEEL BARS IN THE EXPORT PRODUCT.
2 FORMWORK PRECAST MOULD (21.569 MTS NET CONTENT OF TMT/HTD BARS MADE OF MILD STEEL ROUND IS (21.569.000 KGS.) IN EXPORT)

21.56 MTS TMT BARS - 12MM (HTD BAR 12MM X 6M LENGTH STEEL BAR-MS) 146-2014 MADE OF MILD STEEL (MS) ROUND)

1.02KG/KG ON THE NET WEIGHT OF 12 MM TMT MILD STEEL BARS IN THE EXPORT PRODUCT.

.56 MTS TMT BARS - 12MM (HTD BAR 12MM X 6M LENGTH STEEL BAR-MS) 146-2014 MADE OF MILD STEEL (MS) ROUND)

1.02KG/KG ON THE NET WEIGHT OF 12 MM TMT MILD STEEL BARS IN THE EXPORT PRODUCT.

Case No. 40 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name YOGESHWAR ENGINEERING PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00001368AM23 RA File Number 31AX04000051 AM23 Licence No and Date 3111001438/14/06/2022 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

27 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024

Case No. 41 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name JOHNSON LIFTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001370AM23 RA File Number 04AX04000229 AM23 Licence No and Date 0411003461/14/06/2022 The Committee considered the case as per agenda and heard the PH given to the firm to explain the case and manufacturing process in detail. S/Shri Rahul Garg, Acct. Officere and Sourav Kumar Sen, Branch Manager attended the PH as representatives of the firm and explained the case.

o explain the case and manufacturing process in detail. S/Shri Rahul Garg, Acct. Officere and Sourav Kumar Sen, Branch Manager attended the PH as representatives of the firm and explained the case. After due deliberation, the Committee asked the firm to submit the complete information in respect the export and import items including details of utilization of PVC material.

Case No. 42 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name KRISHNA CAPBOX PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001373AM23 RA File Number 05AX04000724 AM23 Licence No and Date 0511013196/14/06/2022 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

28 The committee considered the case as per agenda and noted that a deficiency letter dated 24.07.2024

Case No. 43 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name VICTORA AUTO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004979AM23 RA File Number 05AX04001635 AM23 Licence No and Date 0511014728/09/09/2022 The Committee considered the case as per agenda and noted the firm has requested for rejection of its review application.

RA File Number 05AX04001635 AM23 Licence No and Date 0511014728/09/09/2022 The Committee considered the case as per agenda and noted the firm has requested for rejection of its review application. Hence, the Committee decided to withdraw this case from the agenda showing it as “ rejected”.

Case No. 44 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004347AM25 RA File Number 03AX04003246 AM23 Licence No and Date 0311018045/21/09/2022 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

i. ii. iii. iv. Calculation/basis for the quantities of import items. v.

Case No. 45 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name JOHN CRANE SEALING SYSTEMS INDIA PRIVATELIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004022AM23 RA File Number 07AX04001088 AM23 Licence No and Date 0711005593/02/11/2022 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 07.11.2024 stating that the firm has surrendered the license. Hence, the Committee decided to withdraw this case from the agenda showing it as “rejected”.

Case No. 46 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name THERMAX LIMITED. Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

t as “rejected”.

Case No. 46 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name THERMAX LIMITED. Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

30 and Date HQ File Number HQRNORM APPLY 00004286AM23 RA File Number 31AX04000222 AM23 Licence No and Date 3111001802/11/11/2022 The committee considered the case as per agenda and noted the comments of MHI dated 04.12.2004 concluding that the firm has requested consideration of the case under self-ratification and closure under self-declaration. Therefore, Committee decided to refer the case to concerned RA under self-ratification scheme in terms of para 4.07A of HBP.

Case No. 47 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004348AM25 RA File Number 03AX04004241 AM23 Licence No and Date 0311019480/24/11/2022

i. ii. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii.

Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. iii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iv. Calculation/basis for the quantities of import items. v.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 48 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004349AM25 RA File Number 03AX04004244 AM23 Licence No and Date 0311019481/24/11/2022

Case No. 49 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SULZER PUMPS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004350AM25 RA File Number 03AX04004393 AM23 Licence No and Date 0311019628/30/11/2022 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 50 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name THERMAX BABCOCK & WILCOX ENERGY SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00008377AM24 RA File Number 31AX04000268 AM23 Licence No and Date 3111001903/21/12/2022 The committee considered the case as per agenda and noted the comments of MHI dated 04.12.2004 concluding that the firm has requested consideration of the case under self-ratification and closure under self-declaration. Therefore, Committee decided to refer the case to concerned RA under self-ratification scheme in terms of para 4.07A of HBP.

Case No. 51 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NUCON AEROSPACE PRIVATE LIMITED UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ara 4.07A of HBP.

Case No. 51 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NUCON AEROSPACE PRIVATE LIMITED UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

33 Meeting Number and Date HQ File Number HQRNORM REVIW00003020AM25 RA File Number 09AX04000983 AM23 Licence No and Date 0911004401/03/02/2023

Case No. 52 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LARSEN AND TOUBRO LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006669AM23 RA File Number 03AX04005787 AM23 Licence No and Date 0311021796/28/02/2023

Case No. 53 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007160AM23 RA File Number 04AX04001058 AM23 Licence No and Date 0411005111/23/03/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 09.09.2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Date 0411005111/23/03/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 09.09.2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 54 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000510AM24 RA File Number 05AX04000241 AM24 Licence No and Date 0511018607/01/05/2023

Case No. 55 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000774AM24 RA File Number 08AX04000030 AM24 Licence No and Date 0811008147/11/05/2023 The Committee considered the case as per agenda and noted the firm has informed vide letter dated 26.06.2024 that they have surrendered the license. Hence, the Committee decided to withdraw this case from the agenda showing it as “rejected”.

Case No. 56 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ithdraw this case from the agenda showing it as “rejected”.

Case No. 56 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

35 Party Name WALCHANDNAGAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000893AM24 RA File Number 31AX04000381 AM23 Licence No and Date 3111002290/17/05/2023 The Committee considered the case as per agenda and decided to call the applicant on PH in the forthcoming meeting as per advice of TE.

Case No. 57 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WALCHANDNAGAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000894AM24 RA File Number 31AX04000002 AM24 Licence No and Date 3111002291/17/05/2023 The Committee considered the case as per agenda and decided to call the applicant on PH in the forthcoming meeting as per advice of TE.

Case No. 58 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name GOPALAN AEROSPACE INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004392AM24 RA File Number 07AX04000511 AM24 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

EROSPACE INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004392AM24 RA File Number 07AX04000511 AM24 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

36 Licence No and Date 0711008537/12/07/2023

Case No. 59 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NASMYTH ASIA (IN) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002415AM25 RA File Number 07AX04000628 AM24 Licence No and Date 0711008837/28/07/2023 The Committee considered the case as per agenda and noted that this is a review case . Further, the Committee noted that the wastage recommended by TE are on higher side. The Committee, therefore, decided to discuss this case further in the forthcoming meeting with complete technical details and justification for wastage.

Case No. 60 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005127AM24 RA File Number 05AX04000989 AM24 Licence No and Date 0511020481/18/08/2023

i. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00005127AM24 RA File Number 05AX04000989 AM24 Licence No and Date 0511020481/18/08/2023

i. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

37 ii. iii. iv. Quantities of import items at Sl. No. 3, 5, 16 & 18 in Nos. also in addition to their weight. v. Justification/basis for the quantities of welding materials supported by following information; vi.

Weight of steel, which requires imported welding materials, giving break-up of: i.

Steel Plates/Sheets upto 30 mm thickness. 1. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. 2. Steel Plates/Sheets more than 70 mm thickness. 3. Others e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. ii.

Case No. 61 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name BOTIL OIL TOOLS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001850AM25 RA File Number NA Licence No and Date 0511020615/28/08/2023 The Committee considered the case as per agenda and noted the comments of Consultant (Tech-3) dated 02.12.2024 concluding that wastage recommended earlier was on the basis of size of imported pipes vis-à- vis size of Export Product articles and recovery from sale of scrap and there is no justification for the review.

g that wastage recommended earlier was on the basis of size of imported pipes vis-à- vis size of Export Product articles and recovery from sale of scrap and there is no justification for the review. After due deliberation, the Committee decided to reject the review application with direction to the applicant to pay Custom duty & applicable interest for EODC. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 62 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name P P ROLLING MILLS MFGING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003471AM25 RA File Number 05AX04001457 AM24 Licence No and Date 0511020698/29/08/2023

Case No. 63 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LM WIND POWER BLADES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005520AM24 RA File Number 34AX04000452 AM24 Licence No and Date 3411004100/08/09/2023

Case No. 64 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005554AM24 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

tatus Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005554AM24 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

39 RA File Number 31AX04000136 AM24 Licence No and Date 3111002630/11/09/2023

Case No. 65 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name ENGINEERED POLYMERS (INDIA) PVT LTD Meeting Number and Date NC/ 1/ MEET/ Nov/ 202425/ 17 and 05/12/2024 HQ File Number HQRNORM REVIW00003512AM25 RA File Number 07AX04000882 AM24 Licence No and Date 0711009239/20/09/2023 The Committee considered the case as per agenda and decided to review and to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 05.12.2024, as under: Item of export - Machined plastic parts CNC machining / peek GF30 Item of import - Peek GF30 luvocom nat Item of import is 30 % glass filled polyethermide.
Applicant has asked 25.4% wastage. Recommendation: Wastage is allowed only 10 % since waste material cannot be recycled. i. Import may be allowed as under- Peek GF30 Luvocom NAT(Glass Filled Polyethermide) -1.10 kg/kg content in export. ii. Reason for review: NC had rejected the case in its meeting held on 15.01.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

content in export. ii. Reason for review: NC had rejected the case in its meeting held on 15.01.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

Case No. 66 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name THERMAX BABCOCK & WILCOX ENERGY SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005783AM24 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

40 RA File Number 31AX04000155 AM24 Licence No and Date 3111002654/21/09/2023 The committee considered the case as per agenda and noted the comments of MHI dated 04.12.2004 concluding that the firm has requested consideration of the case under self-ratification and closure under self-declaration. Therefore, Committee decided to refer the case to concerned RA under self-ratification scheme in terms of para 4.07A of HBP.

Case No. 67 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ASIAAN METALS & ALUMINIUM CASTING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003395AM25 RA File Number 07AX04000662 AM24 Licence No and Date 0711009321/27/09/2023

Case No. 68 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name VITECH HEAVY EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006171AM24 RA File Number 03AX04003109 AM24 Licence No and Date 0311027809/11/10/2023 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00006171AM24 RA File Number 03AX04003109 AM24 Licence No and Date 0311027809/11/10/2023 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 69 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name ENGINEERED POLYMERS (INDIA) PVT LTD Meeting Number and Date NC/ 1/ MEET/ Nov/ 202425/ 17 and 05/12/2024 HQ File Number HQRNORM REVIW00003513AM25 RA File Number 07AX04001073 AM24 Licence No and Date 0711009421/11/10/2023 The Committee considered the case as per agenda and decided to review and to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 05.12.2024, as under: Item of export - Machined plastic parts CNC machining / peek GF30 Item of import - Peek GF30 luvocom nat Item of import is 30 % glass filled polyethermide.
Applicant has asked 25.4% wastage. Recommendation: Wastage is allowed only 10 % since waste material cannot be recycled. i. Import may be allowed as under- Peek GF30 Luvocom NAT(Glass Filled Polyethermide) -1.10 kg/kg content in export. ii. Reason for review: NC had rejected the case in its meeting held on 15.01.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

content in export. ii. Reason for review: NC had rejected the case in its meeting held on 15.01.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

Case No. 70 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006234AM24 RA File Number 09AX04000612 AM24 Licence No and Date 0911005977/13/10/2023 The committee considered the case as per agenda and noted that a deficiency letter dated 14.06.2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 71 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name NATRON EQUIPMENT & SPARES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006342AM24 RA File Number 05AX04002138 AM24 Licence No and Date 0511021620/18/10/2023 The Committee considered the case as per agenda and after due deliberation, the concerned TE expressed that this is net-to-net case and he would be giving written comments on this. Hence, the Committee decided to ratify the ad-hoc norms as per comments of DPIIT dated 09.12.2024, as under:

Quantity of import item at SI No. 1 & 2 may be allowed on net-to-net basis with accountability clause as per GN-4 for Engineering Products. 1.

as per comments of DPIIT dated 09.12.2024, as under:

Quantity of import item at SI No. 1 & 2 may be allowed on net-to-net basis with accountability clause as per GN-4 for Engineering Products. 1.

Case No. 72 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name NUCON AEROSPACE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003021AM25 RA File Number 09AX04000617 AM24 Licence No and Date 0911006109/30/10/2023 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 73 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LAXMI DENTAL LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006622AM24 RA File Number 03AX04003350 AM24 Licence No and Date 0311028476/03/11/2023

As per manufacturing detail, wastage showed as 40% while as per details of import in the licence wastage is 65%. i. This may be explained.
ii.

Case No. 74 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00006777AM24 RA File Number 34AX04000619 AM24 Licence No and Date 3411004335/09/11/2023 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00006777AM24 RA File Number 34AX04000619 AM24 Licence No and Date 3411004335/09/11/2023 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 75 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00006778AM24 RA File Number 34AX04000620 AM24 Licence No and Date 3411004336/09/11/2023 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 05.12.2024, as under:

          Export Item:     1. LM 65.4 P3 PJ ROOT GENB R2-          42.0           NUMBERS (NOS)  
                                    2. LM 12.0 P3 PJ TIP G1.5R2     -             42.0           NUMBERS (NOS) 
          TOTAL Net weight per Blade (ROOT AND TIP TOGETHER)-         21,820.0 Kg +/- 3 % 
           Import item:

Sl. No. Sl. No. of Advance Authorization Quantity allowed 1 24,33,34,35,36,41,42,43,95,96,97,98,99,153,160,161,162,163,164,
165, 166, 167,168,169,170,172,173,174,175,176,177,178,179,180, 181,182,183,184,185, 186,187,188,189,190,191,194,195,213,219, 220,221,222,246,248,251,252,269, 270,271,273,274. Components, allowed as per G.N.4 2. 1,2,3,4,5,6,7,8,9,10,17,18,19,20,21,22,23,25,26,32,37,38,113,114, 115,116, 152,154,207,209,210,211,223,243,245,249,250,255,256, 257,258,259,260,261,264,267. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3.

6,32,37,38,113,114, 115,116, 152,154,207,209,210,211,223,243,245,249,250,255,256, 257,258,259,260,261,264,267. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3. Rest of the items As applied for

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

45 Case No. 76 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name DELUX BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004073AM25 RA File Number 03AX04003741 AM24 Licence No and Date 0311028766/17/11/2023

Case No. 77 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007520AM24 RA File Number 31AX04000257 AM24 Licence No and Date 3111002925/21/12/2023

Case No. 78 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ENPRO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008146AM24 RA File Number 31AX04000300 AM24 Licence No and Date 3111003029/24/01/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00008146AM24 RA File Number 31AX04000300 AM24 Licence No and Date 3111003029/24/01/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 79 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name DEE DEVELOPMENT ENGINEERS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008226AM24 RA File Number 05AX04003074 AM24 Licence No and Date 0511023514/31/01/2024

Case No. 80 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008568AM24 RA File Number 06AX04000331 AM24 Licence No and Date 0611002503/14/02/2024 In the Duty Exemption Scheme, components are allowed on a net-to-net basis. However, as per Appendix 4E, some wastage has been taken into account on the imported components from Sl No 1 to 5. Is there any specific reason for asking for more components? Submit proper justification. 1. Drawing of the export products, which could indicate the requirement for imported components. 2. What is the use and function of the imported components? 3. Do the export items fall under the SCOMET List? 4. Submit the NOC issued by the Ministry of Defence for the export of the items. 5.

Case No. 81 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

t? 4. Submit the NOC issued by the Ministry of Defence for the export of the items. 5.

Case No. 81 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

47 Case Status Case Deferred Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008625AM24 RA File Number 06AX04000332 AM24 Licence No and Date 0611002512/16/02/2024

In the Duty Exemption Scheme, components are allowed on a net-to-net basis. However, as per Appendix 4E, some wastage has been taken into account on the imported components from Sl No 1 to 5. Is there any specific reason for asking for more components? Submit proper justification. 1. Drawing of the export products, which could indicate the requirement for imported components. 2. What is the use and function of the imported components? 3. Do the export items fall under the SCOMET List? 4. Submit the NOC issued by the Ministry of Defence for the export of the items. 5.

Case No. 82 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name GHATGE PATIL INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008667AM24 RA File Number 03AX04005273 AM24 Licence No and Date 0311031364/21/02/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ate 0311031364/21/02/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 04.10.2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 83 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00008827AM24 RA File Number 34AX04000866 AM24 Licence No and Date 3411004657/29/02/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under:

Export Item: FRP ROTAR BLADE LM 78.3 P 72 NOS Net weight per BLADE- 17,363.0 Kg +/- 3 % Import item : Sl. No. Sl. No. of Advance Authorisation Quantity allowed 1 6,7,8,9,10,11,12,13,14,15,20,21,22,23,24,25,26,27,28, 36,37,38,39,50,51,52, 53,71,72,73,77,82,83,84,85,86,97, 98, 99,130,131,138,139,142,143,144,147,154.
Components, allowed as per G.N.4 2. 46,47,48,49,58,59,65,67,70,89,90,91,92,129,141,151,152,153.. Consumables Qty as applied for Value altogether restricted to 3.0 % of FOB Value 3. Rest of the items As applied for

Case No. 84 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

FOB Value 3. Rest of the items As applied for

Case No. 84 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

49 Meeting Number and Date HQ File Number HQRNORM APPLY 00008842AM24 RA File Number 34AX04000910 AM24 Licence No and Date 3411004666/01/03/2024

Case No. 85 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00004236AM25 RA File Number 34AX04000912 AM24 Licence No and Date 3411004667/01/03/2024

Case No. 86 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008909AM24 RA File Number 03AX04005556 AM24 Licence No and Date 0311031761/05/03/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

50 Case No. 87 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WEST COAST PAPER MILLS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009070AM24 RA File Number 07AX04001839 AM24 Licence No and Date 0711010756/12/03/2024

Case No. 88 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009238AM24 RA File Number 06AX04000351 AM24 Licence No and Date 0611002578/20/03/2024

Case No. 89 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name DECCAN MECHANICAL AND CHEMICAL INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number

0611002578/20/03/2024

Case No. 89 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name DECCAN MECHANICAL AND CHEMICAL INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00009351AM24 RA File Number 31AX04000358 AM24 Licence No and Date 3111003322/27/03/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 90 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name ENGINEERED POLYMERS (INDIA) PVT LTD Meeting Number and Date NC/ 1/ MEET/ Nov/ 202425/ 17 and 05/12/2024 HQ File Number HQRNORM REVIW00003511AM25 RA File Number 07AX04002082 AM24 Licence No and Date 0711010958/01/04/2024 The Committee considered the case as per agenda and decided to review and to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 05.12.2024, as under: Item of export - Machined plastic parts CNC machining / peek GF30 Item of import - Peek GF30 luvocom nat Item of import is 30 % glass filled polyethermide.
Applicant has asked 25.4% wastage. Recommendation: Wastage is allowed only 10 % since waste material cannot be recycled. i. Import may be allowed as under- Peek GF30 Luvocom NAT(Glass Filled Polyethermide) -1.10 kg/kg content in export. ii. Reason for review: NC had rejected the case in its meeting held on 23.08.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

content in export. ii. Reason for review: NC had rejected the case in its meeting held on 23.08.2024 due to non-availablility of deficient information/documents and applicant filed review thereon.

Case No. 91 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PENGUIN PETROLEUM SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000310AM25 RA File Number 03AX04000181 AM25 Licence No and Date 0311033186/18/04/2024 The Committee considered the case as per agenda and decided to call for following information/documents UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

52 as per advice of TE:

Percentage wastage on net content in Export Product (EP), i. Maximum OD, Minimum ID, length & weight of each EP vis-à-vis OD, ID, length & weight of blank in a tabular form, ii. Total weight of all EP & total weight of all items of import, iii. Total weight of indigenous inputs, if any, iv. CIF value of item of import as per bill of entry & tax invoice of sale of scrap, v. CE certificate is in the name of Optech Engg. This is to clarify. vi.

al weight of indigenous inputs, if any, iv. CIF value of item of import as per bill of entry & tax invoice of sale of scrap, v. CE certificate is in the name of Optech Engg. This is to clarify. vi.

Case No. 92 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004123AM25 RA File Number 34AX04000987 AM24 Licence No and Date 3411004825/22/04/2024

Case No. 93 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00000652AM25 RA File Number 34AX04000108 AM25 Licence No and Date 3411004910/10/05/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under: Export Item: FRP ROTAR BLADE LM 78.3 P- 42 NOS UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

53 Net weight per BLADE - 24,391.0 Kg +/- 3 % Import item:
Sl No. Sl No. of Advance Authorization Quantity allowed. 1 3,5,6,7,8,9,10,16,17,18,19,42,78,79,103,104,107,108,109. Components, allowed as per G.N.4 2. 24,25,27,28,44,45,46,47,106,114. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3.

17,18,19,42,78,79,103,104,107,108,109. Components, allowed as per G.N.4 2. 24,25,27,28,44,45,46,47,106,114. Consumables Qty as applied for Value altogether restricted to 2.0 % of FOB Value 3. Rest of the items As applied for

Case No. 94 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000655AM25 RA File Number 05AX04000326 AM25 Licence No and Date 0511025424/10/05/2024

i. ii. iii. iv. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

54 Quantities of import items at Sl. No. 2, 3, 23, 24, 35, 36 & 54 in Nos. also in addition to their weight. v. Use of import items at Sl. No. 11, 34 & 55 in the respective export items and basis/justification for their quantities. vi. Justification/basis for the quantities of welding materials supported by following information; vii.

a. Weight of steel, which requires imported welding materials, giving break-up of:

Steel Plates/Sheets upto 30 mm thicknesses. 1. Steel Plates/Sheets more than 30 mm thickness and upto 70 mm thickness. 2. Steel Plates/Sheets more than 70 mm thickness. 3. Others e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

rs e.g. Flanes, Pipes, Tubes, Bars/Rods, Castings/Forgins etc. 4.

Detailed calculations for the quantities of welding materials required for overlay supported by overlay areas and thicknesses. b.

Case No. 95 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name VICTORA AUTO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004080AM25 RA File Number 05AX04000424 AM25 Licence No and Date 0511025461/13/05/2024 The Committee considered the case as per agenda and noted that the firm vide email dated 20.06.2024 has requested for surrender of this case. Hence, the Committee decided to withdraw this case from the agenda showing it as “rejected”.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 96 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00000734AM25 RA File Number 34AX04000109 AM25 Licence No and Date 3411004929/15/05/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under:

Export Item- FRP ROTAR BLADE LM 78.3 P 63 NOS Net weight per BLADE- 17,363.0 Kg +/- 3 % Import item: Sl. No. Sl. No. of Advance Authorisation Quantity Allowed 1 6,7,8,9,10,11,12,13,14,15,20,21,22,23,24,25,26,27,28,36, 37,38,39,50,51,52, 53,71,72,73,77,82,83,84,85,86,97,98, 99,130,131,138,139,142,143,144,147,154. Components, allowed as per G.N.4 2.

owed 1 6,7,8,9,10,11,12,13,14,15,20,21,22,23,24,25,26,27,28,36, 37,38,39,50,51,52, 53,71,72,73,77,82,83,84,85,86,97,98, 99,130,131,138,139,142,143,144,147,154. Components, allowed as per G.N.4 2. 46,47,48,49,58,59,65,67,70,89,90,91,92,129,141,151,152, 153.. Consumables Qty as applied for Value altogether restricted to 3.0 % of FOB Value 3. Rest of the items As applied for

Case No. 97 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

56 Party Name NIRMAL OVERSEAS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003380AM25 RA File Number 05AX04000236 AM25 Licence No and Date 0511025552/15/05/2024

Submit revised Appendix 4E by indicating the requirement for indigenous inputs in table “B” of Appendix 4E. i.

Case No. 98 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name CRADLEWISE MANUFACTURING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000809AM25 RA File Number 31AX04000024 AM25 Licence No and Date 3111003444/20/05/2024 The Committee considered the case as per agenda and after due deliberation, the concerned TE expressed that this is net-to-net case and he would be giving written comments on this. Hence, the Committee decided to ratify the ad-hoc norms as per comments of DPIIT dated 09.12.2024, as under:

(i) Quantity of import items at SI No.

d he would be giving written comments on this. Hence, the Committee decided to ratify the ad-hoc norms as per comments of DPIIT dated 09.12.2024, as under:

(i) Quantity of import items at SI No. 1 to 79 may be allowed on net-to-net basis with accountability clause.

Case No. 99 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

57 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000873AM25 RA File Number 06AX04000074 AM25 Licence No and Date 0611002705/24/05/2024

Case No. 100 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000874AM25 RA File Number 06AX04000078 AM25 Licence No and Date 0611002706/24/05/2024

Case No. 101 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000875AM25 RA File Number 06AX04000079 AM25 Licence No and Date 0611002707/24/05/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

and Date HQ File Number HQRNORM APPLY 00000875AM25 RA File Number 06AX04000079 AM25 Licence No and Date 0611002707/24/05/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 102 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000876AM25 RA File Number 06AX04000080 AM25 Licence No and Date 0611002708/24/05/2024

Case No. 103 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000911AM25 RA File Number 06AX04000075 AM25 Licence No and Date 0611002711/27/05/2024

Case No. 104 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LOHIA AEROSPACE SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000912AM25 RA File Number 06AX04000065 AM25 Licence No and Date 0611002712/27/05/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00000912AM25 RA File Number 06AX04000065 AM25 Licence No and Date 0611002712/27/05/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 105 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name TECHNOS PRAZISE ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004216AM25 RA File Number 34AX04000171 AM25 Licence No and Date 3411005002/31/05/2024 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 04.12.2024. After due deliberation, the Committee found that the review application lacks adequate justification and hence, decided to reject the review application.

Case No. 106 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00001211AM25 RA File Number 34AX04000211 AM25 Licence No and Date 3411005026/10/06/2024

Case No. 107 / NC/1/MEET/Nov/202425/17 Case Status Case Approved UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

34AX04000211 AM25 Licence No and Date 3411005026/10/06/2024

Case No. 107 / NC/1/MEET/Nov/202425/17 Case Status Case Approved UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

60 Party Name CRADLEWISE MANUFACTURING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001230AM25 RA File Number 31AX04000078 AM25 Licence No and Date 3111003501/11/06/2024 The Committee considered the case as per agenda and noted that the concerned TE after examining the application expressed that this is net-to-net case and he would be giving written comments on this. Hence, the Committee decided to ratify the ad-hoc norms as per comments of DPIIT dated 09.12.2024, as under:

(i) Quantity of import items at SI No. 1 to 79 may be allowed on net-to-net basis with accountability clause.

Case No. 108 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LEXCRU WATER INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001435AM25 RA File Number 08AX04000376 AM25 Licence No and Date 0811011881/20/06/2024

Case No. 109 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and 2411003661/01/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and 2411003661/01/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

61 Date

Case No. 110 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name BRAKE PARTS INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00001658AM25 RA File Number 33AX04000040 AM25 Licence No and Date 3311002054/01/07/2024 MHI dated 05.12.2024, as under:

Export Product (EP) EP Qty. in Kg. Import Items Quantity to be allowed in Kg inclusive wastage 1325 RENT 16502 4000A 2024022702 1966.70 6208 RIN504401 4000A 2024022702 RLC5301 9215.80 5658 RENT 16002 4000A 2024022702 8400.30 10060 RENT 16002 4000A 2024022702 14935.30 3158 RPN723001 4000A 20240227 02 4688.00 3775 NBR Rubber coated metal sheet SNX6440 5604.70 Shim (Brakes and servo- brakes; parts thereof) 12756 NBR Rubber coated metal sheet SNX5240 18938.10 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

l sheet SNX6440 5604.70 Shim (Brakes and servo- brakes; parts thereof) 12756 NBR Rubber coated metal sheet SNX5240 18938.10 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 111 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001718AM25 RA File Number 31AX04000093 AM25 Licence No and Date 3111003636/03/07/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-3) dated 02.12.2024, as under:

Import is allowed as 2150 Kg. after recovery. i. Grade of item of import will be same as used in Export Product. ii.

Case No. 112 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001729AM25 RA File Number 08AX04000526 AM25 Licence No and Date 0811011986/03/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00001729AM25 RA File Number 08AX04000526 AM25 Licence No and Date 0811011986/03/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 113 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name GALVA DECO PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001736AM25 RA File Number 52AX04000093 AM25 Licence No and Date 5211008770/04/07/2024

Case No. 114 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SAIRAM ENGINEERING Meeting Number and Date HQ File Number HQRNORM APPLY 00001767AM25 RA File Number 07AX04000537 AM25 Licence No and Date 0711011736/05/07/2024

Case No. 115 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name VINDHYA TELELINKS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001798AM25 RA File Number 56AX04000044 AM25 Licence No and Date 5611003072/08/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00001798AM25 RA File Number 56AX04000044 AM25 Licence No and Date 5611003072/08/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

64 Meity dated 29.11.2024, as under:

Note: The written recommendation as given by Meity will be communicated to the applicant as well as concerned RA through email.

Case No. 116 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SANAUTO ENGINEERS (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001832AM25 RA File Number 05AX04000990 AM25 Licence No and Date 0511026577/09/07/2024

Case No. 117 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SANAUTO ENGINEERS (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001833AM25 RA File Number 05AX04000991 AM25 Licence No and Date 0511026578/09/07/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

and Date HQ File Number HQRNORM APPLY 00001833AM25 RA File Number 05AX04000991 AM25 Licence No and Date 0511026578/09/07/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 118 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001866AM25 RA File Number 03AX04001496 AM25 Licence No and Date 0311035347/10/07/2024

i. ii. iii. iv. Sheet layout diagram of the material indicating the wastage during blanking. v.

Case No. 119 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001920AM25 RA File Number 03AX04001625 AM25 Licence No and Date 0311035459/13/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

i. ii. iii. iv.

Case No. 120 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name HORIZON AEROSPACE (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001937AM25 RA File Number 05AX04001166 AM25 Licence No and Date 0511026671/15/07/2024

Case No. 121 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002048AM25 RA File Number 31AX04000132 AM25 Licence No and Date 3111003701/22/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00002048AM25 RA File Number 31AX04000132 AM25 Licence No and Date 3111003701/22/07/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

67 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-3) dated 02.12.2024, as under:

Import is allowed as 2450 Kg. after recovery. i. Grade of item of import will be same as used in Export Product. ii.

Case No. 122 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002154AM25 RA File Number 31AX04000115 AM25 Licence No and Date 3111003724/26/07/2024

Case No. 123 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name STREPARAVA INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002474AM25 RA File Number 07AX04000805 AM25 Licence No and Date 0711012062/12/08/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

and Date HQ File Number HQRNORM APPLY 00002474AM25 RA File Number 07AX04000805 AM25 Licence No and Date 0711012062/12/08/2024

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 124 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name HARIHARAN POWER ENGINEERING Meeting Number and Date HQ File Number HQRNORM APPLY 00002531AM25 RA File Number 04AX04000438 AM25 Licence No and Date 0411008016/14/08/2024

Case No. 125 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002608AM25 RA File Number 09AX04000278 AM25 Licence No and Date 0911007773/21/08/2024

Case No. 126 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name MANDELIA ENGINEERING WORKS Meeting Number and Date HQ File Number HQRNORM APPLY 00002624AM25 RA File Number 02AX04000316 AM25 Licence No and Date 0211007120/21/08/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00002624AM25 RA File Number 02AX04000316 AM25 Licence No and Date 0211007120/21/08/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 127 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name LARSEN AND TOUBRO LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002683AM25 RA File Number 03AX04002526 AM25 Licence No and Date 0311036626/26/08/2024

Application on ANF 4A is required. i.

Case No. 128 / NC/1/MEET/Nov/202425/17 Case Status Case Rejected Party Name BORGWARNER EMISSIONS SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002710AM25 RA File Number 05AX04001428 AM25 Licence No and Date 0511027379/27/08/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 09.10.2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 129 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002748AM25 RA File Number 31AX04000187 AM25 Licence No and Date 3111003835/29/08/2024

Case No. 130 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name TINITA ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002796AM25 RA File Number 03AX04001738 AM25 Licence No and Date 0311036809/02/09/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024 However, no reply has yet been received.

X04001738 AM25 Licence No and Date 0311036809/02/09/2024 The committee considered the case as per agenda and noted that a deficiency letter dated 16.10.2024 However, no reply has yet been received. The committee noted that the applicant has sought 15 days time to submit the required information. Hence, the Committee decided to wait for submission of the reply up to 15 days failing which the case shall be rejected with direction to the applicant to pay Custom duty & applicable interest for EODC.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 131 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002833AM25 RA File Number 03AX04002559 AM25 Licence No and Date 0311036863/03/09/2024

i. ii. iii. iv.

Case No. 132 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00002935AM25 RA File Number 34AX04000463 AM25 Licence No and Date 3411005385/09/09/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under: UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under: UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

72 Export Item: FRP ROTAR BLADE LM 78.3 P 99 NOS Net weight per BLADE- 17,363.0 Kg +/- 3 % Import item: Sl. No. Sl. No. of Advance Authorisation Quantity allowed 1 6,7,8,9,10,11,12,17,18,19,20,21,25,28,29,30,31,39,41,42,43,53,

54, 55,62,63,64,65,66,67,77,78,79,121,122,126,127,129,131,132,
133, 138,148. Components, allowed as per G.N.4 2. 36,37,38,48,71,72,118,130,145. Consumables Qty as applied for Value altogether restricted to 1.0 % of FOB Value 3. Rest of the items As applied for

Case No. 133 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name HQ File Number HQRNORM APPLY 00002939AM25 RA File Number 34AX04000468 AM25 Licence No and Date 3411005386/09/09/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Consultant(Tech-1) dated 01.12.2024, as under:

Export Item: FRP ROTAR BLADE LM 78.3 P 96 NOS Net weight per BLADE- 17,363.0 Kg +/- 3 % Import item: UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

96 NOS Net weight per BLADE- 17,363.0 Kg +/- 3 % Import item: UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

73 Sl. No. Sl. No. of Advance Authorisation Quantity Allowed 1 6,7,8,9,10,11,12,17,18,19,20,21,25,28,29,30,31,39,
41,42,43,53,54,55,62,63,64,65,66,67,77,78,79, 121,122,126,127,129,131,132,133,138,148. Components, allowed as per G.N.4 2. 36,37,38,48,71,72,118,130,145. Consumables Qty as applied for Value altogether restricted to 1.0 % of FOB Value 3. Rest of the items As applied for

Case No. 134 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003003AM25 RA File Number 34AX04000480 AM25 Licence No and Date 3411005398/12/09/2024

Case No. 135 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003116AM25 RA File Number 34AX04000487 AM25 Licence No and Date 3411005411/18/09/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

er and Date HQ File Number HQRNORM APPLY 00003116AM25 RA File Number 34AX04000487 AM25 Licence No and Date 3411005411/18/09/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 136 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name DEVGIRI FORGINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003229AM25 RA File Number 03AX04002952 AM25 Licence No and Date 0311037338/23/09/2024

Case No. 137 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00003238AM25 RA File Number 34AX04000518 AM25 Licence No and Date 3411005446/24/09/2024

Case No. 138 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003285AM25 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

75 RA File Number 31AX04000215 AM25 Licence No and Date 3111003909/25/09/2024

Length of each import item, i. Parts to be manufactured from each raw material. ii. Starting from the import and blank stage to the final product, the manufacturing operations at each stage along with the weight and dimensional drawings. iii. iv.

tured from each raw material. ii. Starting from the import and blank stage to the final product, the manufacturing operations at each stage along with the weight and dimensional drawings. iii. iv.

Case No. 139 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name RAYCHEM-RPG PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003343AM25 RA File Number 03AX04003050 AM25 Licence No and Date 0311037494/27/09/2024

Case No. 140 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003356AM25 RA File Number 09AX04000557 AM25 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

76 Licence No and Date 0911008066/30/09/2024

Case No. 141 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003357AM25 RA File Number 09AX04000554 AM25 Licence No and Date 0911008067/30/09/2024

Case No. 142 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003358AM25 RA File Number 09AX04000459 AM25 Licence No and Date 0911008069/30/09/2024

Case No. 143 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name POWERDRIVE BEARINGS PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

77 and Date HQ File Number HQRNORM APPLY 00003390AM25 RA File Number 08AX04001071 AM25 Licence No and Date 0811012778/01/10/2024

Submit a coloured photograph of the export item.
Submit process flow chart for manufacturing inner rings using steel round bars of 40 mm.
Submit stage-wise wastage at each stage of operation.
Reasons for asking 10% wastage for cage and roller during manufacturing of roller bearings.
What is the Outer and Inner Diameter of the inner ring? Reasons for using steel round instead of using pipe of the same OD & ID and also of the same grade.
What is the grade of steel round? Submit a copy of MTC.

Case No. 144 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003394AM25 RA File Number 24AX04000267 AM25 Licence No and Date 2411003904/01/10/2024

i. ii. iii. iv. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

umber HQRNORM APPLY 00003394AM25 RA File Number 24AX04000267 AM25 Licence No and Date 2411003904/01/10/2024

i. ii. iii. iv. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

78 Quantity of export items in Nos. in addition to their weights. v.

Case No. 145 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003411AM25 RA File Number 05AX04002016 AM25 Licence No and Date 0511028082/01/10/2024

i. ii. iii. iv.

Case No. 146 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

79 and Date HQ File Number HQRNORM APPLY 00003436AM25 RA File Number 05AX04002086 AM25 Licence No and Date 0511028098/03/10/2024

Case No. 147 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003530AM25 RA File Number 24AX04000273 AM25 Licence No and Date 2411003922/08/10/2024

Case No. 148 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003536AM25 RA File Number 56AX04000286 AM25 Licence No and Date 5611003317/08/10/2024

i. ii. iii. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ile Number HQRNORM APPLY 00003536AM25 RA File Number 56AX04000286 AM25 Licence No and Date 5611003317/08/10/2024

i. ii. iii. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

80 iv.

Case No. 149 / NC/1/MEET/Nov/202425/17 Case Status Case Approved Party Name BRAKE PARTS INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00003594AM25 RA File Number 33AX04000072 AM25 Licence No and Date 3311002288/10/10/2024 MHI dated 05.12.2024, as under:

Export Product (EP) EP Qty. in Kg Import Items Quantity to be allowed in Kg inclusive wastage 28484.86 CARBON STEEL COIL 0.40X600C DC01-C590 35870.95 11585 “Rubber coated metal sheet (SNX6440) 0.64mm800mm3311002288coil” 17199.20 3662 Rubber coated metal sheet (SNX5240) 0.52mm800mmcoil” 5436.80 1444 RENT 16502-4000A MASTER COIL RENT16502 2144.20 Shim (Brakes and servo- brakes; parts thereof) UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

81 6072 RIN504401-4000A MASTER COIL RLC5301 9015.00 15703 RENT16002-4000A MASTER COIL RENT16002 23312.50 8306 RPN723001- 4000A MASTER COIL RPN723001 12330.80

RA concerned may take suitable consequential action accordingly

Case No. 150 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name VICTORA AUTO PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003811AM25 RA File Number 05AX04002355 AM25 Licence No and Date 0511028493/23/10/2024

Case No. 151 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SPIROTECH HEAT EXCHANGERS PRIVATE LIMITED Meeting Number and Date HQ File Number

ce No and Date 0511028493/23/10/2024

Case No. 151 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SPIROTECH HEAT EXCHANGERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003990AM25 RA File Number 05AX04002196 AM25 Licence No and Date 0511028734/05/11/2024 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Quantity of export items namely, Condensor Coils & Evaporator Coils in Nos. also in addition to their weights. i. ii. iii. iv.

Case No. 152 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ROYAL AUTOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003991AM25 RA File Number 05AX04002301 AM25 Licence No and Date 0511028744/05/11/2024

Submit coloured drawings of the export item.
Submit process flow chart and wastage of square tube at each stage of operation for manufacturing of export items from Sl No 1 to 4.
What is the grade of the imported square tube? Submit MTC of the imported Square Tube.
Indicate the position of the imported parts in numbers in the coloured drawing.
What is the use of Lawn Mover parts? Will the export items be fitted into the equipment used in the lawn? Submit a small write-up.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

t is the use of Lawn Mover parts? Will the export items be fitted into the equipment used in the lawn? Submit a small write-up.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 153 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name APU PACKAGING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003994AM25 RA File Number 13AX04000234 AM25 Licence No and Date 1311003444/06/11/2024

Case No. 154 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003996AM25 RA File Number 09AX04000643 AM25 Licence No and Date 0911008316/06/11/2024

Submit a chart indicating the number of the processes involved, percentage weight in kg (Before), cutting weight in kg ( after), wastage in kg, and wastage in percentage.
What is the finished weight of the Turbine Blade?
Coloured drawing of the Turbine Blade, which indicates the weight of raw material and weight of the finished product.
Size and shape of the stainless-steel Bars.
Test Mill Certificate of the grade and chemical composition of the imported stainless-steel Bars.
All the documents should be certified by the Chartered Engineer.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

d chemical composition of the imported stainless-steel Bars. 6. All the documents should be certified by the Chartered Engineer.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Case No. 155 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PERMANENT MAGNETS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004002AM25 RA File Number 03AX04003848 AM25 Licence No and Date 0311038498/06/11/2024

Case No. 156 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004014AM25 RA File Number 34AX04000670 AM25 Licence No and Date 3411005645/06/11/2024

Case No. 157 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004015AM25 RA File Number 34AX04000668 AM25 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

RVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004015AM25 RA File Number 34AX04000668 AM25 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

85 Licence No and Date 3411005646/06/11/2024

Case No. 158 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004022AM25 RA File Number 31AX04000271 AM25 Licence No and Date 3111004061/07/11/2024

Case No. 159 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004039AM25 RA File Number 34AX04000677 AM25 Licence No and Date 3411005653/08/11/2024

Case No. 160 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

8/11/2024

Case No. 160 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

86 and Date HQ File Number HQRNORM APPLY 00004041AM25 RA File Number 05AX04002602 AM25 Licence No and Date 0511028791/08/11/2024 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly.
Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential.

eir placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8.

ed. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 161 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

87 and Date HQ File Number HQRNORM APPLY 00004042AM25 RA File Number 05AX04002600 AM25 Licence No and Date 0511028792/08/11/2024

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly.

ss. 2. Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product. 3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import.

highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 162 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

ements.

Case No. 162 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

88 and Date HQ File Number HQRNORM APPLY 00004043AM25 RA File Number 05AX04002601 AM25 Licence No and Date 0511028794/08/11/2024

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly.
Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product.

ed and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included.

nd justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 163 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

89 and Date HQ File Number HQRNORM APPLY 00004047AM25 RA File Number 08AX04001326 AM25 Licence No and Date 0811013162/08/11/2024

Case No. 164 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name GEMSONS PRECISION ENGINEERING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004048AM25 RA File Number 03AX04003840 AM25 Licence No and Date 0311038581/08/11/2024

Case No. 165 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name PAHARPUR COOLING TOWERS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00004076AM25 RA File Number 02AX04000509 AM25 Licence No and Date 0211007586/12/11/2024

Case No. 166 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT )

mber HQRNORM APPLY 00004076AM25 RA File Number 02AX04000509 AM25 Licence No and Date 0211007586/12/11/2024

Case No. 166 / NC/1/MEET/Nov/202425/17 UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

90 Case Status Case Deferred Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004084AM25 RA File Number 31AX04000277 AM25 Licence No and Date 3111004074/12/11/2024

There appears to be inconsistency in data furnished in the application and drawing and hence clarification thereof. i. Starting from the import and blank stage to the final product, the manufacturing operations at each stage alongwith the wirht and dimensional drawings. ii. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. iii.

Case No. 167 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00004125AM25 RA File Number 24AX04000318 AM25 Licence No and Date 2411004026/14/11/2024

Case No. 168 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

2411004026/14/11/2024

Case No. 168 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name OMNITECH ENGINEERING LIMITED UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

91 Meeting Number and Date HQ File Number HQRNORM APPLY 00004153AM25 RA File Number 24AX04000339 AM25 Licence No and Date 2411004028/14/11/2024

i. ii. iii. iv. Quantity of export items in Nos. in addition to their weights. v.

Case No. 169 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SANSERA ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004179AM25 RA File Number 07AX04001240 AM25 Licence No and Date 0711012816/18/11/2024

Case No. 170 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

92 Party Name TETRA-PAK INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004207AM25 RA File Number 31AX04000289 AM25 Licence No and Date 3111004096/19/11/2024

Case No. 171 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004233AM25 RA File Number 05AX04002622 AM25 Licence No and Date 0511029024/19/11/2024

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.

renced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process. 2. Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product. 3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product.

and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

93 calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9.

port Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 172 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004234AM25 RA File Number 05AX04002623 AM25 Licence No and Date 0511029025/19/11/2024

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included.

s, and outputs involved in manufacturing the export product. 3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

n, range, thickness, and any other relevant characteristics of the materials that will be imported for use in the export product. UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

94 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined.

lars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Case No. 173 / NC/1/MEET/Nov/202425/17 Case Status Case Deferred Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004235AM25 RA File Number 05AX04002626 AM25 Licence No and Date 0511029026/19/11/2024 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

Expanded Export Item Names: All export items must be referenced by their full, expanded names to avoid ambiguity or confusion arising from abbreviations or short forms. This ensures clarity and understanding of the items involved in the export process.
Manufacturing Process and Flow Sheet: A comprehensive description of the manufacturing process should be provided, detailing each step from raw material acquisition to final product assembly. This should include an accompanying flow sheet that visually represents the process, outlining key stages, inputs, and outputs involved in manufacturing the export product.
Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included.

s, and outputs involved in manufacturing the export product. 3. Technical Drawings: In order to facilitate a clear understanding of the export product, detailed technical drawings should be included. These drawings must indicate the components imported into the final product, illustrating their placement and integration within the overall assembly. 4. Weight and Material Balancing: For material balancing, a breakdown of the weights for both imported and indigenous inputs is essential. This should be provided separately for each product, specifying net weight (gross weight minus any wastage) of all input materials used in the export product. Additionally, any other imported inputs that are intended for use in the resultant product, along with their net weights and sources of procurement, should also be included. 5. Assembly Diagrams: Assembly diagrams must be included to illustrate the placement and exact usage of each component within the export product. These diagrams should offer a clear visual guide to the assembly process, highlighting how individual parts come together to form the complete product. 6. Specifications of Imported Items: It is necessary to detail the size and specifications of items proposed for import. This includes information on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

on on grade, composition, range, thickness, and any other relevant characteristics of the materials that will be imported for use UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

95 in the export product. 7. Raw Material Specification and Calculation: The process should begin with the specification of the export product. Following this, calculations should be provided to demonstrate how the quantities of raw materials proposed for import have been determined. This includes net weights of components to be manufactured, claimed wastages at each manufacturing stage, and justifications for these figures supported by documentary evidence and drawings. 8. Uses of Export Products: A section describing the intended uses of the export products should also be included. This serves to clarify the purpose and application of these products in the intended markets. 9. Historical Licensing Information: Particulars of any licenses obtained in the past that have been ratified by the Appropriate Licensing Committee (ALC), whether with or without modifications, for the same export product should be outlined. This provides a historical context for the current application and indicates compliance with regulatory requirements.

Minutes of Offline Cases

Sl. No. 01

Case No.: 67/5/80-ALC2/2018

M. No.: NC/1/MEET/Dec/202425/11 (Offline Cases) dated 05.12.2024 Lic. No. 0410164150 Date: 02.04.2018 M/s BHARAT HEAVY ELECTRICALS LIMITED Status : HQ. No.: 01/80/050/00116/AM19/ RLA No.: 04/24/040/00267/AM18/

Subject: Request for re-fixation of ad-hoc

norms Approved Case history: The Committee considered the case as per agenda and noted that the case was approved in M. No. 3/80- ALC2/2019 dated 08.05.2019 as per written comments of DHI vide email dated 06.05.2019. However, the applicant had requested for review of the ad-hoc norms.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

96 The representation of the applicant was forwarded to DHI for examination of the case on 25.02.2020 followed by a reminder on 29.10.2020. As per comments of DHI, a deficiency letter was sent to the applicant on 13.08.2021for furnishing the following information: Complete application with ANF 4A and all enclosures. 1. Background note of the request giving details of the deficiency letter issued & the corresponding reply in the chronological order. 2. Further, the Committee in its meeting dated 16.11.2021 noted that the applicant’s reply was sent to DHI on 26.10.2021 for examination & comments. The representative of DHI informed vide letter dated 16.11.2021 that the applicant’s reply was incomplete and the applicant did not furnish the point-wise reply as asked in deficiency letter dated 13.08.2021. Therefore, the Committee decided to ask again from the applicant for furnishing the requisite information within 15days: Complete application with ANF 4A and all enclosures. 1. Background note of the request giving details of the deficiency letter issued & the corresponding reply in the chronological order. 2.

5days: Complete application with ANF 4A and all enclosures. 1. Background note of the request giving details of the deficiency letter issued & the corresponding reply in the chronological order. 2. Further, the Committee in its meeting dated 08.02.2022 noted that the applicant’s reply was forwarded to DHI on 16.12.2021 for examination & comments. DHI vide latter dated 08.02.2022 stated that this is an old case and sought for certain information. Therefore, the Committee decided to ask from the applicant for furnishing the following information within 15 days: Complete application with ANF 4A, ANF 4B with all enclosures like appendix 4E, Appendix 4K & Appendix 4H. 1. Background note of the request giving details of the deficiency letter issued & the corresponding reply in the chronological order. 2. A deficiency letter dated 10.03.2022 followed by a reminder dated 19.05.2022 was issued to the applicant. Further, the applicant’s reply was sent to Consultant (Tech-3) on 22.07.202 for examination of the case. As per NC decision, a reminder was issued to Consultant (Tech-3) on 26.09.2022 for expediting the comments. This case was considered by NC-1 in its meeting dt.28.04.23 and the decision of the Committee was as under:- “The Committee considered the case as per agenda and noted that Consultant (Tech-3) via email dated 30.10.2022 informed that the applicant’s letter containing issues on which review is required is not available in file.

ered the case as per agenda and noted that Consultant (Tech-3) via email dated 30.10.2022 informed that the applicant’s letter containing issues on which review is required is not available in file. Therefore, the Committee decided to ask the applicant to submit a copy of review letter along with all the relevant documents for examination of the case. Further, the Committee decided to refer this case to DHI for examination. Case is deferred.” Subsequently, the review letter along with all the relevant documents received from the applicant was referred to MHI vide mail dt.26.02.24 for examination and comments. Later on, the case was considered by NC-1 in its meeting dt. 29.02.24 and the Committee decided to refer the case to Consultant (Tech-3) for further examination and comments. Thereafter, the review letter along with all the relevant documents received from the applicant was referred to Consultant (Tech-3) vide mail dt.10.05.24 for examination and comments.
However, no comments have yet been received. Since no comments have yet been received from Consultant (Tech-3), the case may be referred to MHI for examination and comments as MHI had earlier made examination in the case. Case has already been referred to MHI on 26.02.2024 for examination and comments. Decision: The Committee considered the case as per agenda and noted the comments given by MHI. After due deliberation, the Committee decided to review the case and to modify the ad-hoc norms as per comments of MHI dated 05.12.2024, as UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

eliberation, the Committee decided to review the case and to modify the ad-hoc norms as per comments of MHI dated 05.12.2024, as UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

97 under: Note: The written recommendation as given by MHI will be communicated to the applicant as well as concerned RA through email. Sl. No.: 02 M. No.: NC/1/MEET/Dec/202425/11 (Offline Cases) dated 05.12.2024 AA No. : 0711001201 dated 31/05/2021 M/s GENESI PACKAGING PVT LIMITED Status of case HQ. No.: HQRNORMREVIW00003182AM23

Subject: Request for review of case for

fixation of ad-hoc norms. Approved Case history: The ad-hoc norms in respect of AA 0711001201 dated 31.05.2021 of the firm was ratified by NC -1 in its meeting held on 20.07.2023 by allowing a wastage of 10% on net content of import item which is 'COLD ROLLED STAINLESS STEEL SHEETS 430 BA + B & with PVC slit edge' in the export product. Now the firm has mentioned that in its case of AA 0710115123 dated 03-07-2019 wherein the export and import items were the same as in AA 0711001201, NC - 1 in its Meeting held on 18-12-2019 had allowed a wastage of 24.50% on net content of import item in export product. 2. The firm has further stated that as per para 4.12 (vi) of the current Hand book of procedures, the Norms ratified by any Norms Committee (NC) on or after 01-04-2015 in respect of any Advance Authorisation obtained under paragraph 4.07 of HBP 2015-20 shall be valid up to 31.03.2026 and exporters can avail the benefits of these norms on repeat basis.

While ratifying the norms in respect of AA No. 0711001201, NC1 has allowed wastage of 10% on net content of import item in export product instead of 24.50% wastage allowed earlier, which is itself, a violation of para 4.12(vi) of the current Handbook of Procedures.

ed wastage of 10% on net content of import item in export product instead of 24.50% wastage allowed earlier, which is itself, a violation of para 4.12(vi) of the current Handbook of Procedures. 4. It is pertinent to mention here that the para 4.12(vi) of the HBP 2023 stipulates as under: “Norms ratified by any Norms Committee (NC) in the O/o DGFT on or after 01.04.2023 in respect of any Advance Authorisation obtained under paragraph 4.07 shall be valid for a period of three years from the date of ratification. However, the Norms ratified by any Norms Committee (NC) on or after 01.04.2015 in respect of any Advance Authorisation obtained under paragraph 4.07 of HBP, 2015-2020 shall also be valid further upto 31.03.2026.i Since all decisions of the Norms Committees are available in the form of minutes on the DGFT website, all other applicants of Advance Authorisation are also eligible to apply and get their authorisations based on such ratified norms on repeat basis during validity of these norms. This para is not applicable for authorisations applied for items listed under Appendix 4P.” 5. The firm has further expressed that they are facing a technical glitch in filing review application on DGFT Back Office Portal. As such, they are once again attaching the review application along with other requisite documents with humble request to consider the said case as offline mode and fix the norms at the earliest. As per order/email of Chairman, NC-1 dated UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

request to consider the said case as offline mode and fix the norms at the earliest. As per order/email of Chairman, NC-1 dated UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

98 26.11.2024, the case is listed in offline mode for consideration. 5. Similar case of the firm pertaining to AA No. 0711004029 has recently been approved in NC-1 meeting dated 04.11.2024 on the basis of comments of DPIIT. Hence, the case has been referred to DPIIT on 29.11.2024 for examination and comments. All the relevant attachments are enclosed including earlier minutes for examination and review of the case. The confirmation from applicant may be obtained as to whether they have paid the requisite review fee of Rs. 5000/- in terms of para 4.17 of HBP 2023 as they have filed the review after 90 days. Decision: The Committee considered the case as per agenda and noted the comments given by DPIIT. After due deliberation, the Committee decided to review the case and to modify the ad-hoc norms as per comments of DPIIT dated 03.12.2024, as under: Note: The written recommendation as given by DPIIT will be communicated to the applicant as well as concerned RA through email.

UDIN00498429AM25 Digitally Signed. Deputy DGFT ) Location: DGFT(HQ)

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 6967 --apply.