IN FORCE Norms Committee — Engineering (Gr B / NC-I) Advance Authorisation 2020-10-22

DGFT Committee Minutes

Document text

1| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

DIRECTORATE GENERAL OF FOREIGN TRADE (DES-I SECTION)

MINUTES OF MEETING NO. 07/80 OF THE NORMS COMMITTEE-I DATED 22.10.2020 HELD ON 23.10.2020
Meeting No. 07/80 of the Norms Committee (NC-I) for the licensing year 2020-2021 (originally scheduled for 22.10.2020) held on 23.10.2020 under the Chairmanship of Sh. R.P. Goyal, Additional Director General of Foreign Trade to consider the applications under Duty Exemption/Remission Schemes (Chapter-4) of the applicable Foreign Trade Policy and the Handbook of Procedures. The following Members of the Committee were present in the meeting: - Sl. No. Name of the representatives & their Designation Department 1.
Shri K.S. Sodhi, Asst. Director MSME 2.
Shri Sushil Kumar Jangid, Scientist ‘B’ MeitY 3.
Shri Shaish Kumar, (Tech-1) Consultant 4.
Shri V.C. Agarwal, (Tech-3) Consultant 5.
Shri S. K. Bhatnagar,
Consultant In Attendance 1. Dr. D. C. Dabhole, Dy. DGFT DGFT 2. Shri Pranav Upadhyay, Assistant Director ISS DGFT

Note:

  1. In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The scanned copies uploaded are to be accepted. The U.O. No./O.M No of the scanned copy is reflected in the minutes.
  2. Wherever the Committee has fixed norms, the RAs should allow inputs as per wastage norms approved or as applied whichever is less.
  3. All applications/representations/reply to the Deficiency letters etc. may be sent to NC-I at e-mail address- nc1.dgft@nic.in. All firms are also requested to mail/send their present valid email addresses so that correspondences can be made through email/ by Post.
  4. Minutes of Meeting 05/80 (originally scheduled for 10.09.2020) held on 17.09.2020 were circulated on 09.10.2020, to all the members of the Committee and the comments (if any), there upon received, were incorporated in the Minutes and therefore the said minutes were uploaded on dgft.gov.in on 16.10.2020. The said minutes are unanimously approved.

2| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

MEETING NUMBER: 7/80-ALC2/2020 MEETING DATE: 22.10.2020 1

Case No.:366/15/80-

ALC2/2018
Party Name: FOWLER WESTRUP (INDIA) PVT LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00708/AM19/
RLA File :07/24/040/00106/AM16/ Lic.No/Date:0710108605 13.08.2015 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm sent a copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
  2. Weight of each Export Product.
  3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

2

Case No.:30/1/80-ALC2/2019

Party Name: FOWLER WESTRUP (INDIA) PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00778/AM19/
RLA File :07/24/040/00109/AM16/
Lic.No/Date:0710108606 13.08.2015 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm sent a copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

3| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

3

Case No.:363/15/80-

ALC2/2018 Party Name: PROMAC ENGINEERING INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 & 22.10.2020 Status: Deferred HQ File :01/80/050/00705/AM19/ RLA File :07/24/040/00184/AM16/
Lic.No/Date:0710108812 05.10.2015 Pending with DHI Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI for examination of the case on 06.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

4

Case No.:364/15/80-ALC2/2018 Party Name: PROMAC

ENGINEERING INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00706/AM19/
RLA File :07/24/040/00185/AM16/
Lic.No/Date:0710108813 05.10.2015 Pending with DHI for examination of the case on 06.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

5

Case No.:27/5/80-ALC2/2020

Party Name: SCIGENICS (INDIA) PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00577/AM21/
RLA File :04/21/040/00165/AM17/
Lic.No/Date:0410162152 01.08.2016 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 15.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

6

Case No.:215/15/80-ALC2/2018 Party Name: FOWLER

WESTRUP (INDIA) PVT.LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00557/AM19/
RLA File :07/24/040/00201/AM17/
Lic.No/Date:0710110568 25.10.2016 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm sent a copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

4| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

7

Case No.:222/15/80-ALC2/2018 Party Name: FOWLER

WESTRUP (INDIA) PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00564/AM19/
RLA File :07/24/040/00204/AM17/
Lic.No/Date:0710110569 25.10.2016 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm sent a copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

8

Case No.:380/15/80-ALC2/2018 Party Name: FOWLER

WESTRUP (INDIA) PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00722/AM19/
RLA File :07/24/040/00302/AM17/
Lic.No/Date:0710110914 05.01.2017 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm sent a copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

5| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

9

Case No.:126/15/80-ALC2/2018 Party Name: SHAKTI PUMPS

(INDIA) LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00468/AM19/
RLA File :56/24/040/00036/AM18/
Lic.No/Date:5610005299 08.01.2018 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 06.08.2020 followed by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send again a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

10

Case No.:10/1/80-ALC2/2019

Party Name: MAGNA AUTOMOTIVE INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00758/AM19/
RLA File :04/24/040/00001/AM19/
Lic.No/Date:0410164172 06.04.2018 Pending with Firm information as raised by MSME was sent to the firm on 22.07.2020 followed by a reminder on 30.09.2020.

Case is deferred.

11

Case No.:397/15/80-ALC2/2018 Party Name: PROMAC

ENGINEERING INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00739/AM19/
RLA File :07/24/040/00357/AM18/
Lic.No/Date:0710113276 14.05.2018 Pending with DHI for examination of the case on 06.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

12

Case No.:28/5/80-ALC2/2020

Party Name: PENGUIN PETROLEUM SERVICES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00578/AM21/
RLA File :03/92/040/00044/AM19/
Lic.No/Date:0310821057 17.05.2018

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. DPIIT informed vide U.O. No. P-47011/124/2020-TSW dated 24.09.2020 that the case does not pertain to it. However, the case was discussed in the meeting and the Committee decided to refer the case to Consultant (Tech-3) for examination & comments.

Case is deferred.

6| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

13

Case No.:31/5/80-ALC2/2020

Party Name: THE TATA POWER COMPANY LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00581/AM21/
RLA File :07/24/040/00049/AM19/
Lic.No/Date:0710113372 31.05.2018

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MeitY on 15.09.2020 for examination of the case. However, in the meeting, the representative of MeitY requested to send again a copy of application to examine the case. Therefore, the Committee decided to send again a copy of application to MeitY.

Case is deferred.

14

Case No.:133/15/80-ALC2/2018 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00475/AM19/
RLA File :09/24/040/00058/AM19/
Lic.No/Date:0910066357 20.06.2018 Pending with Firm information as raised by DHI was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

15

Case No.:165/15/80-ALC2/2018 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00507/AM19/
RLA File :09/24/040/00139/AM19/
Lic.No/Date:0910066427 06.07.2018 Pending with Firm information as raised by DHI was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

16

Case No.:166/15/80-ALC2/2018 Party Name: BHARAT HEAVY

ELECTRICALS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00508/AM19/
RLA File :09/24/040/00171/AM19/
Lic.No/Date:0910066472 18.07.2018

information as raised by DHI was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020.

Case is deferred.

7| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

17

Case No.:179/15/80-ALC2/2018 Party Name: PROMAC

ENGINEERING INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00521/AM19/
RLA File :07/24/040/00102/AM19/
Lic.No/Date:0710113710 13.08.2018 Pending with DHI for examination of the case on 06.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

18

Case No.:23/11/80-ALC2/2018 Party Name: JAYESH METALS

AND FERRO ALLOYS LLP Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00214/AM19/
RLA File :03/94/040/00488/AM19/
Lic.No/Date:0310823416 29.08.2018

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: ITCHS Code Export Item Quantity ITCHS Code Import Item Recommended Norms 81122100 High Carbon Chromium Metal Powder Tech Characteristic: 80-100 Mesh 3000 Kgs 81122100 High Carbon Chromium Metal Powder Tech Characteristic : 40 Mesh 3030 Kgs inclusive of 1% wastage Note:

  1. The description of import item may be amended as “High Carbon Chromium Metal Powder Tech Characteristic: 40 Mesh”.
  2. The firm should import relevant item only.

RA concerned may take further necessary action as per the decision of NC.

19

Case No.:28/11/80-ALC2/2018 Party Name: L & T-MHPS

TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00219/AM19/
RLA File :03/95/040/00466/AM19/
Lic.No/Date:0310823400 29.08.2018 Pending with DHI for examination of the case on 06.10.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

20

Case No.:9/1/80-ALC2/2019

Party Name: L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00757/AM19/
RLA File :03/95/040/00469/AM19/
Lic.No/Date:0310823645 07.09.2018 Pending with DHI for examination of the case on 19.06.2020 followed by a reminder on 07.09.2020. However, no comments have been received yet. Therefore, the Committee decided to remind again DHI for expediting the comments.

Case is deferred.

8| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

21

Case No.:30/5/80-ALC2/2020

Party Name: PENGUIN PETROLEUM SERVICES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00580/AM21/
RLA File :03/92/040/00172/AM19/
Lic.No/Date:0310823657 10.09.2018

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. DPIIT informed vide U.O. No. P-47011/124/2020-TSW dated 24.09.2020 that the case does not pertain to it. However, the case was discussed in the meeting and the Committee decided to refer the case to Consultant (Tech-3) for examination & comments.

Case is deferred.

22

Case No.:82/11/80-ALC2/2018 Party Name: ANSTECH

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00273/AM19/
RLA File :34/24/040/00218/AM19/
Lic.No/Date:3410044543 04.10.2018 Pending with DPIIT Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT for examination of the case on 16.10.2020. However, no comments have been received yet. Therefore, the Committee decided to wait for the comments.

Case is deferred.

23

Case No.:253/15/80-ALC2/2018 Party Name: BHARAT HEAVY

ELECTRICALS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00595/AM19/
RLA File :09/24/040/00340/AM19/
Lic.No/Date:0910066870 16.11.2018

on 21.08.2020 for examination of the case. It was also noted that information regarding clubbing of AAs (AA No. 0910066870 and 0910065863) is still awaited from RA, Hyderabad and also in this regard a reminder has been sent to RA, Hyderabad. Hence, the Committee decided to wait for requisite information from RA, Hyderabad.

Case is deferred.

24

Case No.:270/15/80-ALC2/2018 Party Name: VEM

TECHNOLOGIES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00612/AM19/
RLA File :09/24/040/00428/AM19/
Lic.No/Date:0910066924 29.11.2018 Pending with Firm information as raised by Consultant (SKB) was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send again a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

9| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

25

Case No.:267/15/80-

ALC2/2018
Party Name: LARSEN & TOUBRO LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status:Deferred HQ File :01/80/050/00609/AM19/
RLA File :03/95/040/00583/AM19/
Lic.No/Date:0310825583 11.12.2018 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/26/2019-TSW dated 20.10.2020:

  1. Net weight of indigenous items in the export product.
  2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  3. Starting from the specification of the export product, basic calculation as to how of raw material proposed
  4. For net weight of components to be manufactured from import items at Sl. No. 1, 2 & 3 details of components with net weights thereof may be indicated.
  5. Quantities of import items at Sl. No. 4 & 6 to 10 in Nos. also in addition to their weights.
  6. Quantity of import item at Sl. No. 5 in meters also in addition to its weight.
  7. Detailed calculations for the quantity of import item at Sl. No. 5 supported by length and number of pipes/tubes in the export product.

Case is deferred.

26

Case No.:42/1/80-ALC2/2019

Party Name: LARSEN & TOUBRO LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00790/AM19/
RLA File :03/95/040/01295/AM19/
Lic.No/Date:0310827622 12.03.2019 Pending with Firm information as raised by Consultant (Tech-3) was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send again a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

27

Case No.:5/2/80-ALC2/2019

Party Name: VIPRA CLOSURES PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00005/AM20/
RLA File :03/95/040/01384/AM19/
Lic.No/Date:0310828134 03.04.2019 Pending with Firm information as raised by MSME was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

10| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

28

Case No.:4/3/80-ALC2/2019

Party Name: VEELINE MEDIA LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00010/AM20/
RLA File :02/24/040/00003/AM20/
Lic.No/Date:0210209114 16.04.2019 Pending with Firm information as raised by MSME was sent to the firm on 30.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

29

Case No.:8/3/80-ALC2/2019

Party Name: L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00014/AM20/
RLA File :03/95/040/01354/AM19/
Lic.No/Date:0310828481 23.04.2019 Pending with DHI for examination of the case on 03.09.2020. However, no comments have been received yet. Therefore, the Committee decided to remind DHI for expediting the comments.

Case is deferred.

30

Case No.:26/5/80-ALC2/2020

Party Name: WHEELS INDIA LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00576/AM21/
RLA File :04/24/040/00278/AM19/
Lic.No/Date:0410165481 23.04.2019 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-3):

  1. Complete set of application.
  2. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
  3. Weight of each Export Product.
  4. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  5. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
  6. Copy of Advance Authorization.

Case is deferred.

11| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

31

Case No.:1/5/80-ALC2/2019

Party Name: PAHARPUR COOLING TOWERS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00039/AM20/
RLA File :02/24/040/00012/AM20/
Lic.No/Date:0210209171 16.05.2019 Pending with Firm information as raised by DPIIT was sent to the firm on 06.03.2020 followed by reminders on 22.07.2020 & 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

32

Case No.:13/5/80-ALC2/2019

Party Name: HEURTEY PETROCHEM INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00051/AM20/
RLA File :34/24/040/00059/AM20/
Lic.No/Date:3410045150 17.05.2019 Pending with Firm information as raised by DHI was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

33

Case No.:1/7/80-ALC2/2019

Party Name: CROWN CLOSURES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00098/AM20/
RLA File :03/94/040/00246/AM20/
Lic.No/Date:0310829905 25.06.2019 Pending with Firm information as raised by Consultant (Tech-1) was sent to the firm on 06.03.2020 followed by reminders on 23.07.2020 & 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

34

Case No.:2/7/80-ALC2/2019

Party Name: OSWAL PUMPS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00099/AM20/
RLA File :33/24/040/00012/AM20/
Lic.No/Date:3310030557 25.06.2019 Pending with Firm information as raised by DPIIT was sent to the firm on 06.03.2020 followed by reminders on 23.07.2020 & 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

12| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

35

Case No.:4/7/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00101/AM20/
RLA File :09/24/040/00138/AM20/
Lic.No/Date:0910067697 26.06.2019 Pending with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of DHI:

  1. Specific item of export. also be indicated.
  2. Calculation of requirement of raw material supported by dimensional engineering drawing with relevant dimensions highlighted. (Export product wise)

Case is deferred.

36

Case No.:10/7/80-ALC2/2019 Party Name: P. M. ELECTRO

AUTO PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00107/AM20/
RLA File :31/83/040/00048/AM20/
Lic.No/Date:3110067458 28.06.2019

written comments of MSME as under: Sl. No. ITCHS
Code Export Item Quantity Sl. No. ITCHS
Code Import Item Recommended Norms 1 84833000 Bearing Housing assembly LIGHT - (1,80,000 Nos) 1313280 Kgs 1 72104900 Hot Dipped Galvanised Steel Coils - 1.8 mm 686501 Kgs inclusive of 42% wastage (49.88% wastage for rail and 19.7% wastage for saddle) after affecting 1/3rd recovery from scrap 2 73181500 U-BOLT M10 x 1.5P As per GN-4 2 84833000 Bearing Housing assembly Heavy- (80,000 Nos) 692560 Kgs 3 73181600 NUTS M10 x 1.5 x 11 As per GN-4 Note:

  1. Per unit weight of export item at Sl. No. 1 is 7.3 kg including Rail - 2 numbers per assembly (0.71 kg /unit) , saddle - 2 numbers per assembly (0.22 kg / unit), U bolt - 2 Nos per assembly (0.3 kg/unit) and hex nut M10 - 4 Nos per assembly (0.01 kg/unit) along with other parts made from indigenous raw material.
  2. Per unit weight of export item at Sl. No. 2 is 8.7 kg including Rail - 2 numbers per assembly (0.71 kg /unit), saddle - 2 numbers per assembly (0.22 kg / unit), U bolt - 2 Nos per assembly (0.3 kg/unit) and hex nut M10 - 4 Nos per assembly (0.01 kg/unit) along with other components made from indigenous raw material.
  3. The firm should import relevant items only.

13| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

37

Case No.:12/7/80-ALC2/2019

Party Name: AUTOCOMP CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00109/AM20/
RLA File :31/83/040/00050/AM20/
Lic.No/Date:3110067460 01.07.2019 Pending with Firm information as raised by DHI was sent to the firm on 20.05.2020 followed by reminders on 23.07.2020 & 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

38

Case No.:15/7/80-ALC2/2019

Party Name: DOOWON CLIMATE CONTROL INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00112/AM20/
RLA File :66/24/040/00003/AM20/
Lic.No/Date:6610000035 03.07.2019 Pending with Firm information as raised by DHI was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020.

Case is deferred.

39

Case No.:3/9/80-ALC2/2019

Party Name: DYNA FORCE HYDRAULICS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00128/AM20/
RLA File :31/83/040/00067/AM20/
Lic.No/Date:3110067484 25.07.2019 Pending with Firm information as raised by MSME was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020.

Case is deferred.

40

Case No.:45/11/80-ALC2/2004 Party Name: L&T- MHPS

TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00171/AM20/
RLA File :03/95/040/00574/AM20/
Lic.No/Date:0310831568 16.09.2019 Pending with DHI for examination of the case on 19.06.2020 followed by a reminder on 07.09.2020. However, no comments have been received yet. Therefore, the Committee decided to remind again DHI for expediting the comments.

Case is deferred.

14| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

41

Case No.:46/11/80-ALC2/2004 Party Name: L&T-MHPS

BOILERS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00172/AM20/
RLA File :03/95/040/00588/AM20/
Lic.No/Date:0310831569 16.09.2019 Pending with Firm information as raised by DHI was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020.

Case is deferred.

42

Case No.:1/13/80-ALC2/2019

Party Name: RONCH POLYMERS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00186/AM20/
RLA File :03/95/040/00654/AM20/
Lic.No/Date:0310832012 04.10.2019 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm was informed for furnishing the complete reply of deficiency letter dated 05.08.2020on 15.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

43

Case No.:2/13/80-ALC2/2019

Party Name: FERRUM EXTREME ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00187/AM20/
RLA File :05/23/040/00265/AM20/
Lic.No/Date:0510412040 07.10.2019 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-3):

  1. Copy of Advance Authorization.
  2. Copy of export order.
  3. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
  4. Weight of each Export Product.
  5. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  6. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete
  7. Sheet layout diagram of the material indicating the wastage during blanking.

Case is deferred.

15| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

44

Case No.:4/13/80-ALC2/2019

Party Name: L&T- MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00189/AM20/
RLA File :03/95/040/00681/AM20/
Lic.No/Date:0310832116 10.10.2019 Pending with DHI for examination of the case on 20.05.2020 followed by a reminder on 15.10.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

45

Case No.:5/13/80-ALC2/2019

Party Name: L&T- MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00190/AM20/
RLA File :03/95/040/00655/AM20/
Lic.No/Date:0310832159 11.10.2019 Pending with DHI for examination of the case on 13.10.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

46

Case No.:6/13/80-ALC2/2019

Party Name: GODREJ & BOYCE MFG. CO. LTD. Meet No/Date:7/80- Status: Approved HQ File :01/80/050/00191/AM20/
RLA File :03/94/040/00505/AM20/
Lic.No/Date:0310832178 11.10.2019

written comments of Consultant (SKB). (Copy enclosed)

47

Case No.:7/13/80-ALC2/2019

Party Name: ISGEC HITACHI ZOSEN LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00192/AM20/
RLA File :05/23/040/00269/AM20/
Lic.No/Date:0510412096 11.10.2019

Decision: The Committee considered the case as per the agenda and noted that the firm reply has been received on 22.10.2020. Therefore, the Committee decided to forward the firm’s reply to DPIIT for examination & comments.

Case is deferred.

48

Case No.:8/13/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00193/AM20/
RLA File :09/24/040/00347/AM20/
Lic.No/Date:0910068080 14.10.2019 Pending with Firm information as raised by Consultant (SKB) was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send again a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

16| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

49

Case No.:1/17/80-ALC2/2019

Party Name: VICTORA AUTO PVT. LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00233/AM20/
RLA File :05/24/040/00513/AM20/
Lic.No/Date:0510412724 29.11.2019 Pending with Firm information as raised by MSME was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

50

Case No.:5/17/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00237/AM20/
RLA File :09/24/040/00439/AM20/
Lic.No/Date:0910068244 02.12.2019 Pending with Firm information as raised by Consultant (SKB) was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

51

Case No.:11/17/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00243/AM20/
RLA File :09/24/040/00437/AM20/
Lic.No/Date:0910068247 04.12.2019 Pending with Firm

Case is deferred.

52

Case No.:12/17/80-ALC2/2019 Party Name: DOOWON

CLIMATE CONTROL INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00244/AM20/
RLA File :26/24/040/00012/AM20/
Lic.No/Date:2610012887 04.12.2019 Pending with Firm information as raised by DHI was sent to the firm on 24.07.2020 followed by a reminder on 30.09.2020.

Case is deferred.

17| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

53

Case No.:13/17/80-ALC2/2019 Party Name: KABY PRECISION

MACHINING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00245/AM20/
RLA File :09/24/040/00447/AM20/
Lic.No/Date:0910068268 06.12.2019 Pending with Firm information as raised by DPIIT was sent to the firm on 27.07.2020 followed by a reminder on 30.09.2020.

Case is deferred.

54

Case No.:6/18/85-ALC3/2019

Party Name: AUTOCOMP CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/85/050/00132/AM20/
RLA File :31/83/040/00120/AM20/
Lic.No/Date:3110067623 10.12.2019 Pending with Tech-3 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-3) for examination of the case on 23.09.2020. However, Consultant (Tech-3) informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

55

Case No.:4/19/80-ALC2/2019

Party Name: CRYOGAS EQUIPMENT PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00269/AM20/
RLA File :34/24/040/00287/AM20/
Lic.No/Date:3410045738 24.12.2019 Pending with Firm information as raised by DPIIT was sent to the firm on 24.07.2020 followed by a reminder on 30.09.2020. However, the firm via email dated 19.10.2020, has requested for extension of time till the end of month October, 2020. Therefore, the Committee decided to wait for the firm’s reply.

Case is deferred.

56

Case No.:9/19/80-ALC2/2019

Party Name: BONATRANS INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00274/AM20/
RLA File :03/94/040/00785/AM20/
Lic.No/Date:0310833747 27.12.2019 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that DHI in its comments sated that the firm’s reply is incomplete. Therefore, the Committee decided to ask again from the firm to furnish following information as per comments of DHI:

  1. Detail technical note on manufacturing process including the relevant flow sheet.
    material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete

18| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. Calculation should be based on the dimensional drawing of import & export item in English language.
  2. To provide clarification for, why ITCHS Code of import & export is same.

Case is deferred.

57

Case No.:8/19/80-ALC2/2019

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00273/AM20/
RLA File :02/24/040/00148/AM20/
Lic.No/Date:0210209647 30.12.2019 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to call the firm for personal hearing via video-conferencing along with following information, on the advice of Consultant (SKB), in the forthcoming NC meeting, since the justification submitted by applicant does not qualify for increasing the wastage.

  1. What do they mean other wastage?
  2. Sizes of small plates are being cut from the plate size 2020mmx 3000 mm size plate.
  3. Number of cuts for small size plate from2020 mm x 3000 mm plate.
  4. When they already discarded the edges in the beginning then why again wastage is required for making small size plates?

Case is deferred.

58

Case No.:10/19/80-ALC2/2019 Party Name: BANGALORE

BIOTECH LABS PVT LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00275/AM20/
RLA File :07/24/040/00223/AM20/
Lic.No/Date:0710115950 30.12.2019 DPIIT Decision: The Committee considered the case as per the agenda and noted that the firm reply has been received on 22.10.2020. Therefore, the Committee decided to forward the firm’s reply to DPIIT for examination & comments.

Case is deferred.

59

Case No.:11/19/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00276/AM20/
RLA File :09/24/040/00489/AM20/
Lic.No/Date:0910068312 31.12.2019 Pending with Firm

Case is deferred.

60

Case No.:12/19/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00277/AM20/
RLA File :09/24/040/00490/AM20/
Lic.No/Date:0910068313 31.12.2019 Pending with Firm

19| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Case is deferred.

61

Case No.:13/19/80-ALC2/2019 Party Name: AUTOCOMP

CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00278/AM20/
RLA File :31/83/040/00128/AM20/
Lic.No/Date:3110067645 31.12.2019 Pending with Firm information as raised by Consultant (Tech-3) was sent to the firm on 30.09.2020. However, no reply has been

Case is deferred.

62

Case No.:14/19/80-ALC2/2019 Party Name: ISGEC HEAVY

ENGINEERING LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00279/AM20/
RLA File :05/23/040/00381/AM20/
Lic.No/Date:0510413163 01.01.2020 Pending with Firm information as raised by Consultant (SKB) was sent to the firm on 27.08.2020 followed by a reminder on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send again a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

63

Case No.:15/19/80-ALC2/2019 Party Name: SOGEFI ENGINE

SYSTEMS INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Withdrawn HQ File :01/80/050/00280/AM20/
RLA File :07/24/040/00097/AM20/
Lic.No/Date:0710115971 02.01.2020

Decision: The Committee considered the case as per agenda and noted that the case was rejected in Meeting No. 05/80 dated 10.09.2020. Therefore, the Committee decided to withdraw the case from the agenda. Case is withdrawn.

64

Case No.:17/19/80-ALC2/2019 Party Name: ISGEC HEAVY

ENGINEERING LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00282/AM20/
RLA File :05/23/040/00378/AM20/
Lic.No/Date:0510413181 02.01.2020 Pending with Firm information as raised by DHI was sent to the firm on 24.07.2020 followed by a reminder on 30.09.2020.

Case is deferred.

20| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

65

Case No.:1/21/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00295/AM20/
RLA File :09/24/040/00522/AM20/
Lic.No/Date:0910068392 21.01.2020 Pending with Firm

Case is deferred.

66

Case No.:2/21/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00296/AM20/
RLA File :09/24/040/00523/AM20/
Lic.No/Date:0910068393 21.01.2020 Pending with Firm

Case is deferred.

67

Case No.:3/21/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00297/AM20/
RLA File :09/24/040/00524/AM20/
Lic.No/Date:0910068394 21.01.2020 Pending with Firm

Case is deferred.

68

Case No.:4/21/80-ALC2/2019

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00298/AM20/
RLA File :09/24/040/00528/AM20/
Lic.No/Date:0910068395 21.01.2020 Pending with Firm

Case is deferred.

21| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

69

Case No.:7/21/80-ALC2/2019

Party Name: LM WIND POWER BLADES INDIA PVT. LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00301/AM20/
RLA File :34/24/040/00329/AM20/
Lic.No/Date:3410045799 21.01.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on correct email address on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

70

Case No.:8/21/80-ALC2/2019

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00302/AM20/
RLA File :34/24/040/00330/AM20/
Lic.No/Date:3410045800 21.01.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on correct email address on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

71

Case No.:9/21/80-ALC2/2019

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00303/AM20/
RLA File :05/24/040/00398/AM20/
Lic.No/Date:0510413428 23.01.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47012/15/2020-TSW dated 29.09.2020:

  1. Recovery from Aluminium/Aluminium Alloy scrap generated during the manufacturing process with sale price of Aluminium/Aluminium Alloy scrap supported by documentary evidence like copies of sale invoices.

Case is deferred.

72

Case No.:10/21/80-ALC2/2019 Party Name: THERMAL

SYSTEMS (HYDERABAD) P. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00304/AM20/
RLA File :09/24/040/00506/AM20/
Lic.No/Date:0910068410 24.01.2020 Pending with Firm information as raised by DHI was sent to the firm on 27.08.2020 followed by a reminder on 01.10.2020.

Case is deferred.

22| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

73

Case No.:12/21/80-ALC2/2019 Party Name: KAY BOUVET

ENGINEERING LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00306/AM20/
RLA File :31/83/040/00139/AM20/
Lic.No/Date:3110067666 27.01.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by reminders on 27.07.2020 & 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to send final reminder to the firm for submitting the complete set of application.

Case is deferred.

74

Case No.:17/21/80-ALC2/2019 Party Name: AVLIGHT

AUTOMOTIVES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00311/AM20/
RLA File :05/23/040/00359/AM20/
Lic.No/Date:0510413478 29.01.2020 Pending with Firm following information as per advice of Consultant (Tech-1):

  1. Generic name of export product.
  2. Catalogue of import item indicating type of polymer.
  3. Percentage of wastage claimed if any.
  4. Net content of import item in each of export.

Case is deferred.

75

Case No.:18/21/80-ALC2/2019 Party Name: LM WIND POWER

BLADES INDIA PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00312/AM20/
RLA File :34/24/040/00341/AM20/
Lic.No/Date:3410045830 30.01.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on correct email address on 15.10.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application for examination of the case.

Case is deferred.

76

Case No.:19/21/80-ALC2/2019 Party Name: BENGAL

INDUSTRIES PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00313/AM20/
RLA File :05/23/040/00415/AM20/
Lic.No/Date:0510413481 30.01.2020 Pending with Firm following information as per comments of MSME:

  1. To provide clarification for why the export item at Sl. No. 1 consists of three part numbers. Import item at Sl. No. 1 required for each part number is0.72 kg, 3.6 kg and 1 kg respectively i.e. 5.32 kg or 11.72 lbs per export product. Therefore the import required for 1000 numbers ofexports is 11720 lbs while the AA has been applied for 6612 lbs.
  2. Similarly for export item at Sl. No. 2, the import material required is 430 kgs or 948 lbs while licence has been applied for 6612 lbs. To provide clarification for the same.

Case is deferred.

23| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

77

Case No.:20/21/80-ALC2/2019 Party Name: LM WIND POWER

Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00314/AM20/
RLA File :34/24/040/00344/AM20/
Lic.No/Date:3410045838 30.01.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on correct email address on 15.10.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application for examination of the case.

Case is deferred.

78

Case No.:21/21/80-ALC2/2019 Party Name: BHARAT HEAVY

ELECTRICALS LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00315/AM20/
RLA File :11/24/040/00011/AM20/
Lic.No/Date:1110028681 31.01.2020

following information as per comments of DPIIT vide U. O. No.: P-47011/390/2018-TSW dated 18.09.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

79

Case No.:22/21/80-ALC2/2019 Party Name: JAIN IRRIGATION

SYSTEMS LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00316/AM20/
RLA File :03/94/040/00435/AM20/
Lic.No/Date:0310834593 03.02.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by reminders on 04.08.2020 & 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to send final reminder to the firm for submitting the complete set of application.

Case is deferred.

80

Case No.:23/21/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00317/AM20/
RLA File :09/24/040/00557/AM20/
Lic.No/Date:0910068441 03.02.2020 Pending with Firm

Case is deferred.

24| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

81

Case No.:24/21/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00318/AM20/
RLA File :09/24/040/00559/AM20/
Lic.No/Date:0910068442 03.02.2020 Pending with Firm

Case is deferred.

82

Case No.:25/21/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00319/AM20/
RLA File :09/24/040/00552/AM20/
Lic.No/Date:0910068443 03.02.2020 Pending with Firm

Case is deferred.

83

Case No.:26/21/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00320/AM20/
RLA File :09/24/040/00554/AM20/
Lic.No/Date:0910068444 03.02.2020 Pending with Firm

Case is deferred.

84

Case No.:27/21/80-ALC2/2019 Party Name: AZAD

ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00321/AM20/
RLA File :09/24/040/00553/AM20/
Lic.No/Date:0910068445 03.02.2020 Pending with Firm

Case is deferred.

25| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

85

Case No.:31/21/80-ALC2/2019 Party Name: TEMA INDIA

LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00325/AM20/
RLA File :03/95/040/01062/AM20/
Lic.No/Date:0310834668 06.02.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by reminders on 20.07.2020 & 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to send final reminder to the firm for submitting the complete set of application.

Case is deferred.

86

Case No.:15/22/80-ALC2/2019 Party Name: SULZER INDIA

PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00341/AM20/
RLA File :31/83/040/00145/AM20/
Lic.No/Date:3110067680 11.02.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by reminders on 20.07.2020 & 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to send final reminder to the firm for submitting the complete set of application.

Case is deferred.

87

Case No.:4/23/80-ALC2/2019

Party Name: RONCH POLYMERS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00349/AM20/
RLA File :03/95/040/01089/AM20/
Lic.No/Date:0310834951 20.02.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the firm was informed for furnishing the complete reply of deficiency letter dated 05.08.2020on 15.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

88

Case No.:3/23/80-ALC2/2019

Party Name: AVLIGHT AUTOMOTIVES LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00348/AM20/
RLA File :05/23/040/00424/AM20/
Lic.No/Date:0510413679 21.02.2020 Pending with Firm following information as per advice of Consultant (Tech-1):

  1. Generic name of export product.
  2. Catalogue of import item indicating type of polymer.
  3. Percentage of wastage claimed if any.
  4. Net content of import item in each of export.

Case is deferred.

26| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

89

Case No.:6/23/80-ALC2/2019

Party Name: L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00351/AM20/
RLA File :03/95/040/01074/AM20/
Lic.No/Date:0310835043 25.02.2020 DHI Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 06.10.2020 for examination of the case. However, DHI pointed out that application was incomplete and therefore requested to send again the complete set of application to examine the case. Therefore, the Committee decided to send again a copy of application to DHI for examination of the case. Case is deferred.

90

Case No.:7/23/80-ALC2/2019

Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00352/AM20/
RLA File :34/24/040/00375/AM20/
Lic.No/Date:3410045913 28.02.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on correct email address on 30.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

91

Case No.:8/23/80-

ALC2/2019 Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00353/AM20/ RLA File :09/24/040/00595/AM20/
Lic.No/Date:0910068531 02.03.2020 Pending with Firm

Case is deferred.

92

Case No.:9/23/80-

ALC2/2019 Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00354/AM20/ RLA File :09/24/040/00594/AM20/
Lic.No/Date:0910068532 02.03.2020 Pending with Firm

Case is deferred.

93

Case No.:12/23/80-

ALC2/2019 Party Name: ACEINOTEC MANUFACTURING PVT LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00357/AM20/ RLA File :07/24/040/00294/AM20/
Lic.No/Date:0710116194 02.03.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that second deficiency letter seeking certain information as raised by MSME was sent to the firm on 01.10.2020. However, no reply has been Case is deferred.

27| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

94

Case No.:1/1/80-ALC2/2020

Party Name: AAVID THERMALLOY INDIA PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00377/AM20/
RLA File :34/24/040/00395/AM20/
Lic.No/Date:3410045959 18.03.2020 Pending with firm following information as per comments of DPIIT:

  1. Weight of each Export Product.
  2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  3. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

95

Case No.:2/1/80-ALC2/2020

Party Name: AVLIGHT AUTOMOTIVES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00378/AM20/
RLA File :05/23/040/00470/AM20/
Lic.No/Date:0510413923 19.03.2020

written comments of MSME as under: Sl. No.

ITCHS
Code Export Item Quantity Sl. No.

ITCHS
Code Import Item Recommended Norms 1 87089900 E2SC Check Arm Front / Moulded Arm Front MV Parts / Plastic Moulded Components 104500 Number 1 73261910 E2SC Front Inserts Sheet Metal Comp - S2800030 As per GN-4 2 87089900 E2SC Check Arm Rear / Moulded Arm Rear MV Parts / Plastic Moulded Components 72200 Number 2 73261910 E2SC Rear Inserts Sheet Metal Compo - S2800230 As per GN-4 3 87089900 O1SL Check Arm Front / Moulded Arm Front MV Parts / Plastic Moulded Components 9690 Number 3 73261910 01SL Front Inserts Sheet Metal Comp - S2102030 As per GN-4 4 87089900 O1SL Check Arm Rear / Moulded Arm Rear MV Parts / Plastic Moulded Components 9690 Number 4 73261910 O1SL Rear Inserts Sheet Metal Comp - S2102330 As per GN-4

28| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

96

Case No.:5/1/80-ALC2/2020

Party Name: WHEELS INDIA LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00381/AM21/
RLA File :04/24/040/00205/AM20/
Lic.No/Date:0410166653 02.04.2020

written comments of Consultant (Tech-3) as under: ITCHS Code Export Item Quantity ITCHS Code Import Item Recommended Norms 87087000 Forged And Machined Aluminium Wheel (Weight = 26.5Kg/each) 66000 Number 76012020 Aluminium Billets (6061/69242) 2711 MT with 55% wastage after 50% recovery

97

Case No.:6/1/80-ALC2/2020

Party Name: NEO STRUCTO CONSTRUCTION PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00382/AM21/
RLA File :52/24/040/00083/AM20/
Lic.No/Date:5210043372 04.04.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47011/122/2020-TSW dated 18.09.2020:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed

Case is deferred.

98

Case No.:7/1/80-ALC2/2020

Party Name: UNI VTL PRECISION PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00383/AM21/
RLA File :07/24/040/00002/AM21/
Lic.No/Date:0710116329 07.04.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 24.07.2020 followed by a reminder on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

29| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

99

Case No.:8/1/80-ALC2/2020

Party Name: AUTO TECH INDUSTRIES INDIA PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00384/AM21/
RLA File :04/24/040/00002/AM21/
Lic.No/Date:0410166662 08.04.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 24.07.2020 followed by a reminder on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

100

Case No.:9/1/80-ALC2/2020

Party Name: NIPHA EXPORTS PRIVATE LIM ITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00385/AM21/
RLA File :02/24/040/00199/AM20/
Lic.No/Date:0210209839 09.04.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 24.07.2020 followed by a reminder on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

101

Case No.:10/1/80-ALC2/2020

Party Name: TPI COMPOSITES INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00386/AM21/
RLA File :04/24/040/00001/AM21/
Lic.No/Date:0410166666 13.04.2020 Pending with Firm following information as per comments of Consultant (Tech-1):

  1. Net weight of export product.
  2. Exact description, generic name of import item along with catalogue.
  3. Exact nature of import items namely raw material, component, and consumable.
  4. Percentage wastage claimed on net content basis for each of raw material and justification for the same.
  5. List of consumables along with value.
  6. Details of indigenous input with their quantity.
  7. Percentage of non volatile matter in various paints, hardener, resin and adhesive.
  8. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  9. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

30| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

102

Case No.:13/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00389/AM21/
RLA File :09/24/040/00647/AM20/
Lic.No/Date:0910068616 17.04.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the firm on 30.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite

Case is deferred.

103

Case No.:14/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00390/AM21/
RLA File :09/24/040/00648/AM20/
Lic.No/Date:0910068617 17.04.2020 Pending with Firm

Case is deferred.

104

Case No.:15/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00391/AM21/
RLA File :09/24/040/00649/AM20/
Lic.No/Date:0910068618 17.04.2020 Pending with Firm

Case is deferred.

105

Case No.:16/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00392/AM21/
RLA File :09/24/040/00650/AM20/
Lic.No/Date:0910068619 17.04.2020 Pending with Firm

Case is deferred.

31| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

106

Case No.:17/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00393/AM21/
RLA File :09/24/040/00651/AM20/
Lic.No/Date:0910068620 17.04.2020 Pending with Firm

Case is deferred.

107

Case No.:18/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00394/AM21/
RLA File :09/24/040/00652/AM20/
Lic.No/Date:0910068621 17.04.2020 Pending with Firm

Case is deferred.

108

Case No.:19/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00395/AM21/
RLA File :09/24/040/00653/AM20/
Lic.No/Date:0910068622 17.04.2020 Pending with Firm

Case is deferred.

109

Case No.:20/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00396/AM21/
RLA File :09/24/040/00654/AM20/
Lic.No/Date:0910068623 17.04.2020 Pending with Firm

Case is deferred.

32| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

110

Case No.:21/1/80-ALC2/2020

Party Name: TPI COMPOSITES INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00397/AM21/
RLA File :04/24/040/00003/AM21/
Lic.No/Date:0410166684 22.04.2020 Pending with Firm following information as per comments of Consultant (Tech-1):

  1. Net weight of export product.
  2. Exact description, generic name of import item along with catalogue.
  3. Exact nature of import items namely raw material, component, and consumable.
  4. Percentage wastage claimed on net content basis for each of raw material and justification for the same.
  5. List of consumables along with value.
  6. Details of indigenous input with their quantity.
  7. Percentage of non volatile matter in various paints, hardner, resin and adhesive.
  8. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  9. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete

Case is deferred.

111

Case No.:22/1/80-ALC2/2020

Party Name: ACEINOTEC MANUFACTURING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00398/AM21/
RLA File :07/24/040/00016/AM21/
Lic.No/Date:0710116365 23.04.2020 Pending with Firm certain information as raised by MSME was sent to the firm on 01.10.2020. However, no reply has been

Case is deferred.

112

Case No.:23/1/80-ALC2/2020

Party Name: KINECO KAMAN COMPOSITES - INDIA PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00399/AM21/
RLA File :03/94/040/01087/AM20/
Lic.No/Date:0310835847 25.04.2020 Pending with Firm certain information as raised by DPIIT was sent to the firm on 01.10.2020. However, no reply has been

Case is deferred.

33| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

113

Case No.:24/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00400/AM21/
RLA File :34/24/040/00022/AM19/
Lic.No/Date:3410046010 27.04.2020

written comments of Consultant (Tech-1) as under: Sl. No. ITCHS Code Import Item Recommended Norms 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product 2 32064990 Masterbatch (Plasblak) 3 84249000 Dripnet Pc As Dripper 1.0l/H 0.26gph (Emmitters (Dripper)) Net + 1% wastage 4 32064990 Color Masterbatch 5 39011010 LLDPE 6 84249000 Dripnet Pc As Dripper 1.6l/H 0.42gph (Emmitters (Dripper)) Net + 1% wastage 7 84248200 Dripnet Pc As Dripper 2.0l/H 0.53gph (Emmitters (Dripper)) Net + 1% wastage

114

Case No.:27/1/80-

ALC2/2020
Party Name: NETAFIM IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00403/AM21/
RLA File :34/24/040/00245/AM19/
Lic.No/Date:3410046016 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emitting Pipe System) Pe Pipe 16/2.5/1.2 mm 400m Ind Net Weight 51.46 Gms/Mtr 350000 Meter 1 39011010 LLDPE 1.02 Kgs/Kg net content in the export product
2 32064990 Masterbatch (Plasblak) the export product
3 39012000 HDPE the export product
4 32064990 Color Masterbatch the export product

34| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

115

Case No.:28/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00404/AM21/
RLA File :34/24/040/00267/AM18/
Lic.No/Date:3410046009 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe Systems) PeIrri. Pipe 16/2.5/1.1 - 1.3mm Cl-Ii 400m Net Weight 48.58 Gms/Meter 213200 Meter 1 39011090 LDPE 2 39011010 LLDPE 3 32064990 Masterbatch (Plasblak) 4 39012000 HDPE 5 39011010 HI (KAFRIT) Masterbatch Note: The word “Masterbatch” should be added in the description of import item at Sl. No. 5.

116

Case No.:29/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00405/AM21/
RLA File :34/24/040/00313/AM16/
Lic.No/Date:3410046014 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248100 Micro Irrigation Equipment (Emmitting Pipe Systems) Dripnet PC AS 16009 1.00L/H 0.20 M 500M Net Weight 40.775 GMS/METER 30000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 39011010 LLDPE 1.02 Kgs/Kg net content in the export product
3 32064990 Masterbatch (Plasblak) 1.02 Kgs/Kg net content in the export product
4 32064990 Orange -Masterbatch 3xlldu40528a-Orange Strips F/Ext-Kafrit 1.02 Kgs/Kg net content in the export product
5 84249000 Emmitters (Dripper) Dripnet PC AS DRIP 1.00L/H 0.26GPH Net + 1% wastage

35| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

117

Case No.:31/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00407/AM21/
RLA File :34/24/040/00368/AM18/
Lic.No/Date:3410046011 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 MICRO IRRIGATION EQUIPMENT (EMMITING PIPE SYSTEM) DRIPNET PC AS 16150 1.0L/H 0.50M 1200M NET WEIGHT 20.65 GMS/PER METER 1344000 Meter 1 39012000 HDPE 2 32064990 MASTERBATCH (PLASBLAK) 3 84249000 DRIPNET PC AS DRIPPER 1.0L/H 0.26GPH [EMMITTERS (DRIPPER)] Net + 1% wastage 4 32064990 COLOR MASTERBATCH 5 39011010 LLDPE

118

Case No.:32/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00408/AM21/
RLA File :34/24/040/00246/AM18/
Lic.No/Date:3410046017 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 MICRO IRRIGATION EQUIPMENT (EMMITING PIPE SYSTEMS) STREAMLINE+ 16060 2.20L/H 0.30M 1000M NET WEIGHT - 7.68 GMS/METER 3600000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 MASTER BATCH (PLASBLAK) 1.02 Kgs/Kg net product
3 39011010 LLDPE 1.02 Kgs/Kg net product 4 84249000 STREAMLINE DRIP 1.70L/H 0.4 GPH BLACK Net + 1% wastage 5 32064990 COLOUR MASTERBATCH 1.02 Kgs/Kg net product

36| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

119

Case No.:34/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00410/AM21/
RLA File :34/24/040/00250/AM18/
Lic.No/Date:3410046019 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe Systems) Streamline+ 16080 2.20l/H 0.30m 1000m Net Weight 9.87 GMS/METER 2880000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net product
2 32064990 Master Batch (Plasblack) 1.02 Kgs/Kg net product
3 39011010 LLDPE 1.02 Kgs/Kg net product 4 84249000 Streamline Drip 1.70l/H 0.4 Gph Black Net + 1% wastage 5 32064990 ColourMasterbatch 1.02 Kgs/Kg net product

120

Case No.:35/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00411/AM21/
RLA File :34/24/040/00289/AM18/
Lic.No/Date:3410046020 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe System) Strm+ 16080 2.20l/H 0.30m 1000m Net Weight 9.87 GMS/MTR 14400000 Number 1 39012000 HDPE 1.02 Kgs/Kg net product
2 32064990 Master Batch (Plasblak) 1.02 Kgs/Kg net product
3 39011010 LLDPE 1.02 Kgs/Kg net product 4 84249000 Streamline Drip 1.70l/H 0.4 Gph Black Net + 1% wastage 5 32064990 ColourMasterbatch 1.02 Kgs/Kg net product

37| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

121

Case No.:36/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00412/AM21/
RLA File :34/24/040/00251/AM18/
Lic.No/Date:3410046021 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe Systems) Dripnet Pc As 16150 1.00l/H 0.50m 1200m Net Weight 20.65gms/Meter 2016000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 MASTERBATCH (PLASBLACK) 1.02 Kgs/Kg net content in the export product
3 84249000 Emmitters(Dripper) Dripnet Pc As Drip 1.0l/H 0.26gph Net + 1% wastage 4 32064990 Color Masterbatch 1.02 Kgs/Kg net content in the export product 5 39011010 LLDPE 1.02 Kgs/Kg net content in the export product

122

Case No.:37/1/80-ALC2/2020

Party Name: NETAFIM IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00413/AM21/
RLA File :34/24/040/00395/AM18/
Lic.No/Date:3410046022 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe System) Dripnet Pc As 16150 1.0l/H 0.50m 1200m Net Weight 20.65 Gms/ Per Mtr 672000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 Masterbatch (Plasblak) 1.02 Kgs/Kg net content in the export product
3 84249000 Emmitters (Dripper) Dripnet Pc As Dripper 1.0l/H 0.26gph Net + 1% wastage 4 32064990 Color Masterbatch 1.02 Kgs/Kg net content in the export product 5 39011010 LLDPE 1.02 Kgs/Kg net content in the export product

38| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

123

Case No.:38/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00414/AM21/
RLA File :34/24/040/00310/AM18/
Lic.No/Date:3410046023 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84249000 Micro Irrigation Equipment (Emmiting Pipe System) Strm+ 16060 2.20l/H 0.30m 1000m Net Wt. 7.68 Gms/Per Mtr 14400000 Number 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 Master Batch (Plasblak) 1.02 Kgs/Kg net content in the export product
3 39011010 LLDPE 1.02 Kgs/Kg net content in the export product 4 84249000 Streamline Drip 2.20l/H 0.58 Gph Black Net + 1% wastage 5 32064990 ColourMasterbatch 1.02 Kgs/Kg net content in the export product

124

Case No.:40/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00416/AM21/
RLA File :34/24/040/00268/AM18/
Lic.No/Date:3410046025 27.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe System) PeIrri. Pipe 16/2.5/1.1 -1.3mm Cl-Ii 400m Net Weight 91.88 GMS/METER 150000 Meter 1 39011090 LDPE 2 39011010 LLDPE 3 32064990 Masterbatch (Plasblak)

39| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

125

Case No.:42/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00418/AM21/
RLA File :09/24/040/00639/AM20/
Lic.No/Date:0910068678 28.04.2020 Pending with Firm

Case is deferred.

126

Case No.:43/1/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00419/AM21/
RLA File :09/24/040/00640/AM20/
Lic.No/Date:0910068679 28.04.2020 Pending with Firm

Case is deferred.

127

Case No.:44/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00420/AM21/
RLA File :34/24/040/00192/AM18/
Lic.No/Date:3410046027 28.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84249000 MICRO IRRIGATION EQUIPMENT (EMMITING PIPE SYSTEMS) STREAMLINE+ 16080 2.20L/H 0.30M 1000M NET WEIGHT 9.873 GMS/METER 2880000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 MASTER BATCH (PLASBLAK) 1.02 Kgs/Kg net content in the export product
3 39011010 LLDPE 1.02 Kgs/Kg net content in the export product 4 84249000 STREAMLINE DRIP 1.70L/H 0.4 GPH BLACK Net + 1% wastage 5 32064990 COLOUR MASTERBATCH 1.02 Kgs/Kg net content in the export product

40| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

128

Case No.:46/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00422/AM21/
RLA File :34/24/040/00325/AM18/
Lic.No/Date:3410046029 28.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment (Emmiting Pipe System) Pe Pipe 16/2.5/1.2mm 400m Ind Net Weight 51.46 GMS/MTR 250000 Meter 1 39011010 LLDPE the export product
2 32064990 Masterbatch (Plasblak) the export product
3 32064990 Color Masterbatch the export product
4 39012000 HDPE the export product

129

Case No.:47/1/80-ALC2/2020 Party Name: NETAFIM

IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00423/AM21/
RLA File :34/24/040/00030/AM20/
Lic.No/Date:3410046030 28.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 MICRO IRRIGATION EQUIPMENTS/ SYSTEM, STREAMLINE + 12125 1.60L/H
0.20M 1400M NET WEIGHT 11.62 GMS/METTER 1498000 Meter 1 39012000 HDPE 1.02 Kgs/Kg net content in the export product
2 32064990 MASTERBATCH (PLASBLAK) 1.02 Kgs/Kg net content in the export product
3 39011010 LLDPE 1.02 Kgs/Kg net content in the export product 4 84249000 STREAMLINE DRIP 1.70L/H 0.45 GPH BLACK Net + 1% wastage 5 32064990 COLOUR MASTERBATCH 1.02 Kgs/Kg net content in the export product

41| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

130

Case No.:48/1/80-

ALC2/2020 Party Name: NETAFIM IRRIGATION INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 &22.10.2020 Status: Approved HQ File :01/80/050/00424/AM21/
RLA File :34/24/040/00029/AM20/
Lic.No/Date:3410046031 28.04.2020

ITCHS Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 84248200 Micro Irrigation Equipment/ System Streamline+ 12125 1.05l/H 0.20m 1400m (Net Weight 11.62 GMS/MTR) 1999200 Meter 1 39012000 HDPE 2 32064990 Masterbatch (Plasblak) 3 39011010 LLDPE 4 84249000 Streamline Drip 1.00L/H 0.26 GPH BLACK Net + 1% wastage
5 32064990 ColourMasterbatch (Plasblak)

131

Case No.:49/1/80-ALC2/2020

Party Name: HUMANETICS INNOVATIVE SOLUTIONS INDIA PRIVATE LIMI Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00425/AM21/
RLA File :07/24/040/00001/AM21/
Lic.No/Date:0710116407 30.04.2020 Pending with Firm certain information as raised by DPIIT was sent to the firm on 01.10.2020. However, no reply has been Case is deferred.

132

Case No.:50/1/80-ALC2/2020 Party Name: AVLIGHT

AUTOMOTIVES PVT. LTD. Meet No/Date:7/80- ALC2/2020 &22.10.2020 Status: Approved HQ File :01/80/050/00426/AM21/
RLA File :05/23/040/00005/AM21/
Lic.No/Date:0510414101 04.05.2020

written comments of MSME as under: Sl. No.

ITCHS
Code Export Item Quantity Sl. No. ITCHS Code Import Item Recommended Norms 1 87089900 E2UL MOULDED ARM FRTMV PARTS _ PLASTIC MOULDED COMPONENTS 59850 Number 1 73261910 INSERT PLATING – FRT Sheet Metal Component_ E2UL_ S2048720 As per GN-4 2 87089900 E2UL MOULDED ARM RR MV PARTS_ PLASTIC MOULDED COMPONENTS 59850 Number 2 73261910 INSERT PLATNG_RR Sheet Metal Components_ E2UL_ S2048820 As per GN-4

42| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

133

Case No.:51/1/80-ALC2/2020

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00427/AM21/
RLA File :02/24/040/00005/AM21/
Lic.No/Date:0210209859 06.05.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to call the firm for personal hearing via video-conferencing along with following information, on the advice of Consultant (SKB), in the forthcoming NC meeting, since the justification submitted by applicant does not qualify for increasing the wastage.

  1. What do they mean other wastage?
  2. Sizes of small plates are being cut from the plate size 2020mmx 3000 mm size plate.
  3. Number of cuts for small size plate from2020 mm x 3000 mm plate.
  4. When they already discarded the edges in the beginning then why again wastage is required for making small size plates?

Case is deferred.

134

Case No.:52/1/80-ALC2/2020

Party Name: DEE DEVELOPMENT ENGINEERS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00428/AM21/
RLA File :05/23/040/00020/AM21/
Lic.No/Date:0510414127 08.05.2020 Pending with Firm following information as per comments of DHI:

  1. Specific item of export with complete specification.
  2. Break-up of import item No. 4 to 10 with quantity in number & weight. material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete

Case is deferred.

135

Case No.:54/1/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00430/AM21/
RLA File :34/24/040/00021/AM21/
Lic.No/Date:3410046049 11.05.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 27.07.2020 followed by a reminder on 30.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

43| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

136

Case No.:1/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00475/AM21/
RLA File :09/24/040/00132/AM21/
Lic.No/Date:0910068852 05.06.2020 Pending with Firm

Case is deferred.

137

Case No.:2/3/80-

ALC2/2020
Party Name: PRECISION EQUIPMENTS (CHENNAI) PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00476/AM21/
RLA File :04/24/040/00036/AM21/ Lic.No/Date:0410166809 10.06.2020 Pending with Firm following information as per comments of Consultant (Tech-3):

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete
  3. Sheet layout diagram of the material indicating the wastage during blanking.
  4. Net weight of components to be manufactured out of imported raw material.
  5. Drawings submitted may be co-related to items of import.

Case is deferred.

138

Case No.:3/3/80-ALC2/2020

Party Name: JOHNSON MATTHEY INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00477/AM21/
RLA File :05/23/040/00045/AM21/
Lic.No/Date:0510414366 10.06.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 27.08.2020 followed by a reminder on 14.10.2020. However, no information has been received yet. Hence, the Committee decided to waitfor the complete set of application for examination of the case.

Case is deferred.

44| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

139

Case No.:4/3/80-ALC2/2020

Party Name: AUTOFIT CAR INTERIORS PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00478/AM21/
RLA File :10/24/040/00018/AM21/
Lic.No/Date:1010060538 11.06.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 15.10.2020. However, no information has been received yet. The Committee also decided to send a letter to the firm by post for submitting the complete set of application.

Case is deferred.

140

Case No.:5/3/80-ALC2/2020

Party Name: AUTOCOMP CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00479/AM21/
RLA File :31/83/040/00012/AM21/
Lic.No/Date:3110067753 11.06.2020 Pending with Firm

Case is deferred.

141

Case No.:6/3/80-ALC2/2020

Party Name: ISGEC HEAVY ENGINEERING LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00480/AM21/
RLA File :05/23/040/00047/AM21/
Lic.No/Date:0510414386 12.06.2020 Pending with Firm

Case is deferred.

142

Case No.:7/3/80-ALC2/2020

Party Name: ISGEC HITACHI ZOSEN LIMITED Meet No/Date:7/80- ALC2/2020 &22.10.2020 Status: Deferred HQ File :01/80/050/00481/AM21/
RLA File :05/23/040/00049/AM21/
Lic.No/Date:0510414387 12.06.2020 Pending with Firm

Case is deferred.

45| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

143

Case No.:8/3/80-ALC2/2020

Party Name: CML BIOTECH PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 &22.10.2020 Status: Deferred HQ File :01/80/050/00482/AM21/
RLA File :10/24/040/00020/AM21/
Lic.No/Date:1010060548 15.06.2020 Pending with Firm following information as per comments of Consultant (Tech-1):

  1. Process of manufacture shown is only assembly as such justification for 2% wastage on pet tube and 3% wastage on stopper.
  2. Size and specification of foam tray.

Case is deferred.

144

Case No.:9/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00483/AM21/
RLA File :09/24/040/00135/AM21/
Lic.No/Date:0910068868 15.06.2020 Pending with Firm

Case is deferred.

145

Case No.:10/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00484/AM21/
RLA File :09/24/040/00134/AM21/
Lic.No/Date:0910068869 15.06.2020 Pending with Firm

Case is deferred.

146

Case No.:11/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00485/AM21/
RLA File :09/24/040/00136/AM21/
Lic.No/Date:0910068870 15.06.2020 Pending with Firm

Case is deferred.

46| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

147

Case No.:12/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00486/AM21/
RLA File :09/24/040/00133/AM21/
Lic.No/Date:0910068872 15.06.2020 Pending with Firm

Case is deferred.

148

Case No.:13/3/80-ALC2/2020

Party Name: ISGEC HEAVY ENGINEERING LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00487/AM21/
RLA File :05/23/040/00055/AM21/
Lic.No/Date:0510414402 15.06.2020 Pending with Firm

Case is deferred.

149

Case No.:14/3/80-ALC2/2020

Party Name: AAVID THERMALLOY INDIA PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00488/AM21/
RLA File :34/24/040/00058/AM21/
Lic.No/Date:3410046140 15.06.2020 Pending with firm following information as per comments of DPIIT vide U. O. No.: P-47011/148/2020-TSW dated 29.10.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

150

Case No.:15/3/80-ALC2/2020

Party Name: AAVID THERMALLOY INDIA PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00489/AM21/
RLA File :34/24/040/00059/AM21/
Lic.No/Date:3410046141 15.06.2020 Pending with firm following information as per comments of DPIIT vide U. O. No.: P-47011/148/2020-TSW dated 29.10.2020:

47| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

151

Case No.:16/3/80-ALC2/2020

Party Name: DEE DEVELOPMENT ENGINEERS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00490/AM21/
RLA File :05/23/040/00051/AM21/
Lic.No/Date:0510414434 19.06.2020 Pending with Firm following information as per comments of DHI :

  1. Specific item of export with complete specification.
  2. Break-up of import item No. 3 to 7 with quantity in number & weight. material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete

Case is deferred.

152

Case No.:17/3/80-ALC2/2020

Party Name: SULZER INDIA PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00491/AM21/
RLA File :31/83/040/00019/AM21/
Lic.No/Date:3110067766 22.06.2020 Pending with Firm 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

153

Case No.:18/3/80-ALC2/2020

Party Name: L&T-MHPS BOILERS PVT LTD Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00492/AM21/
RLA File :03/95/040/00161/AM21/
Lic.No/Date:0310836794 22.06.2020 Pending with Firm 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

48| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

154

Case No.:22/3/80-ALC2/2020

Party Name: BONATRANS INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00496/AM21/
RLA File :03/94/040/00207/AM21/
Lic.No/Date:0310836946 30.06.2020

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 13.10.2020 for examination of the case. However, DHI pointed out that application was incomplete and therefore requested to send again the complete set of application to examine the case. Therefore, the Committee decided to send again a copy of application to DHI for examination of the case.

Case is deferred.

155

Case No.:23/3/80-ALC2/2020

Party Name: MAGNETI MARELLI TALBROS CHASSIS SYSTEMS PRIVATE LI Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00497/AM21/
RLA File :05/24/040/00140/AM21/
Lic.No/Date:0510414515 30.06.2020

written comments of MSME as under: ITCHS Code Export Item Quantity ITCHS Code Import Item Recommended Norms 87088000 REAR TOE LINK [AUTO PARTS] 100600 Number 87089900 M8A2-5K896-AA, L560 21MY RP14 BUSH As per GN-4

156

Case No.:24/3/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00498/AM21/
RLA File :05/24/040/00134/AM21/
Lic.No/Date:0510414517 30.06.2020

written comments of DPIIT vide U. O. No. P-47012/15/2020-TSW dated 12.10.2020. (Copy enclosed)

157

Case No.:25/3/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00499/AM21/
RLA File :05/24/040/00142/AM21/
Lic.No/Date:0510414518 30.06.2020

written comments of DPIIT vide U. O. No. P-47012/15/2020-TSW dated 12.10.2020. (Copy enclosed)

49| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

158

Case No.:26/3/80-ALC2/2020

Party Name: THE ANUP ENGINEERING LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00500/AM21/
RLA File :08/24/040/00076/AM21/
Lic.No/Date:0810148023 30.06.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47011/414/2018-TSW dated 22.10.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.

Case is deferred.

159

Case No.:27/3/80-ALC2/2020

Party Name: FRIZAIR PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00501/AM21/
RLA File :09/24/040/00158/AM21/
Lic.No/Date:0910068919 30.06.2020

written comments of DPIIT vide U. O. No. P-47011/63/2020-TSW dated 23.09.2020. (Copy enclosed)

160

Case No.:28/3/80-ALC2/2020

Party Name: ONASSIS AUTO LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00502/AM21/
RLA File :05/24/040/00152/AM21/
Lic.No/Date:0510414546 03.07.2020 Pending with Firm following information as per comments of MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred.

50| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

161

Case No.:29/3/80-ALC2/2020

Party Name: MASU BRAKE PADS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00503/AM21/
RLA File :05/24/040/00156/AM21/
Lic.No/Date:0510414554 03.07.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and noted the comments of Consultant (Tech-

  1. given for import items at Sl. No. 4 to 23. However, the matter was discussed in meeting and the Committee decided to ask from the firm to furnish the following information as per advice of Consultant (SKB):
  1. To provide details of items in the import item at Sl. No. 3 i.e. Accessories for Disc Brake Pads separately.
  2. How many liners in 700MT of export of Disk Brake Pads.
  3. Size of each i.e. (LxBxT) Back Plate in export product & then size of each imported steel plate & thickness thereof along with the total weight.
  4. How many SHIM will be used in the export product & weight thereof (Weight of each SHIM).

Case is deferred.

162

Case No.:30/3/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00504/AM21/
RLA File :34/24/040/00077/AM21/
Lic.No/Date:3410046197 07.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on

Case is deferred.

163

Case No.:36/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00510/AM21/
RLA File :09/24/040/00190/AM21/
Lic.No/Date:0910068933 07.07.2020 Pending with Firm

Case is deferred.

164

Case No.:37/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00511/AM21/
RLA File :09/24/040/00194/AM21/
Lic.No/Date:0910068934 07.07.2020 Pending with Firm

Case is deferred.

51| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

165

Case No.:38/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00512/AM21/
RLA File :09/24/040/00193/AM21/
Lic.No/Date:0910068935 07.07.2020 Pending with Firm

Case is deferred.

166

Case No.:39/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00513/AM21/
RLA File :09/24/040/00195/AM21/
Lic.No/Date:0910068936 07.07.2020 Pending with Firm

Case is deferred.

167

Case No.:40/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00514/AM21/
RLA File :09/24/040/00187/AM21/
Lic.No/Date:0910068937 07.07.2020 Pending with Firm

Case is deferred.

168

Case No.:41/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00515/AM21/
RLA File :09/24/040/00188/AM21/
Lic.No/Date:0910068938 07.07.2020 Pending with Firm

Case is deferred.

52| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

169

Case No.:42/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00516/AM21/
RLA File :09/24/040/00192/AM21/
Lic.No/Date:0910068939 07.07.2020 Pending with Firm

Case is deferred.

170

Case No.:43/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00517/AM21/
RLA File :09/24/040/00189/AM21/
Lic.No/Date:0910068940 07.07.2020 Pending with Firm

Case is deferred.

171

Case No.:44/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00518/AM21/
RLA File :09/24/040/00191/AM21/
Lic.No/Date:0910068941 07.07.2020 Pending with Firm

Case is deferred.

172

Case No.:31/3/80-ALC2/2020

Party Name: ENDURANCE TECHNOLOGIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00505/AM21/
RLA File :03/94/040/00237/AM21/
Lic.No/Date:0310837075 08.07.2020

Decision: The Committee considered the case as per the agenda and decided to refer the case to MSME for examination & comments.

Case is deferred.

173

Case No.:32/3/80-ALC2/2020

Party Name: SUPER CIRCLE AUTO LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00506/AM21/
RLA File :05/24/040/00148/AM21/
Lic.No/Date:0510414590 08.07.2020 Pending with Firm following information as per advice of Consultant (Tech-1)& Consultant (SKB):

53| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. In the list of import specific item to be imported.
  2. Details of indigenous input along with quantity.
  3. Function of each import item in the manufacturing.
  4. Material balance between import and export in weight terms taking in to account indigenous input and wastage involved.
  5. To provide a legible copy manufacturing process details.
  6. To indicate the quantity of Backing Plate/Back Plate/Steel Core/ Hand Lever/Shim in number & weight thereof.
  7. How many liners will be exported under 300MT of export?
  8. Size of each i.e. (LxBxT) Back Plate in export product & then size of each imported steel plate & thickness thereof along with the total weight. Case is deferred.

174

Case No.:33/3/80-ALC2/2020

Party Name: L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00507/AM21/
RLA File :03/95/040/00220/AM21/
Lic.No/Date:0310837100 09.07.2020

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 06.10.2020 for examination of the case. However, DHI pointed out that application was incomplete and therefore requested to send again the complete set of application to examine the case. Therefore, the Committee decided to send again a copy of application to DHI for examination of the case.

Case is deferred.

175

Case No.:34/3/80-ALC2/2020

Party Name: L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00508/AM21/
RLA File :03/95/040/00219/AM21/
Lic.No/Date:0310837101 09.07.2020

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 06.10.2020 for examination of the case. However, DHI pointed out that application was incomplete and therefore requested to send again the complete set of application to examine the case. Therefore, the Committee decided to send again a copy of application to DHI for examination of the case.

Case is deferred.

176

Case No.:35/3/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00509/AM21/
RLA File :34/24/040/00076/AM21/
Lic.No/Date:3410046199 09.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 28.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

54| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

177

Case No.:45/3/80-ALC2/2020

Party Name: PENGUIN PETROLEUM SERVICES PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00519/AM21/
RLA File :03/95/040/00147/AM21/
Lic.No/Date:0310837144 13.07.2020

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. DPIIT informed vide U.O. No. P-47011/124/2020-TSW dated 24.09.2020 that the case does not pertain to it. However, the case was discussed in the meeting and the Committee decided to refer the case to Consultant (Tech-3) for examination & comments.

Case is deferred.

178

Case No.:46/3/80-ALC2/2020

Party Name: SULZER PUMPS INDIA LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00520/AM21/
RLA File :03/89/040/00069/AM21/
Lic.No/Date:0310837170 14.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 01.10.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

179

Case No.:47/3/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00521/AM21/
RLA File :34/24/040/00092/AM21/
Lic.No/Date:3410046223 17.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 28.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

180

Case No.:49/3/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00523/AM21/
RLA File :34/24/040/00093/AM21/
Lic.No/Date:3410046224 17.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 28.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

55| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

181

Case No.:50/3/80-ALC2/2020

Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00524/AM21/
RLA File :34/24/040/00094/AM21/
Lic.No/Date:3410046225 17.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 28.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

182

Case No.:48/3/80-ALC2/2020

Party Name: THE ANUP ENGINEERING LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00522/AM21/
RLA File :08/24/040/00094/AM21/
Lic.No/Date:0810148164 20.07.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47011/414/2018-TSW dated 24.09.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

183

Case No.:51/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00525/AM21/
RLA File :09/24/040/00217/AM21/
Lic.No/Date:0910068972 20.07.2020 Pending with Firm

Case is deferred.

184

Case No.:52/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00526/AM21/
RLA File :09/24/040/00216/AM21/
Lic.No/Date:0910068973 20.07.2020 Pending with Firm

Case is deferred.

56| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

185

Case No.:53/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00527/AM21/
RLA File :09/24/040/00215/AM21/
Lic.No/Date:0910068974 20.07.2020 Pending with Firm

Case is deferred.

186

Case No.:54/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00528/AM21/
RLA File :09/24/040/00214/AM21/
Lic.No/Date:0910068975 20.07.2020 Pending with Firm

Case is deferred.

187

Case No.:55/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00529/AM21/
RLA File :09/24/040/00213/AM21/
Lic.No/Date:0910068976 20.07.2020 Pending with Firm

Case is deferred.

188

Case No.:56/3/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00530/AM21/
RLA File :09/24/040/00212/AM21/
Lic.No/Date:0910068977 20.07.2020 Pending with Firm

Case is deferred.

57| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

189

Case No.:57/3/80-ALC2/2020

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80-ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00531/AM21/
RLA File :02/24/040/00045/AM21/ Lic.No/Date:0210209990 21.07.2020 Pending with Firm Decision: The Committee considered the case as per the agenda and decided to call the firm for personal hearing via video-conferencing along with following information, on the advice of Consultant (SKB), in the forthcoming NC meeting, since the justification submitted by applicant does not qualify for increasing the wastage.

  1. What do they mean other wastage?
  2. Sizes of small plates are being cut from the plate size 2020mmx 3000 mm size plate.
  3. Number of cuts for small size plate from2020 mm x 3000 mm plate.
  4. When they already discarded the edges in the beginning then why again wastage is required for making small size plates?

Case is deferred.

190

Case No.:58/3/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00532/AM21/
RLA File :05/24/040/00186/AM21/
Lic.No/Date:0510414670 21.07.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47012/15/2020-TSW dated 12.10.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  2. Recovery from Aluminium/Aluminium Alloy scrap generated during the manufacturing process with sale price of aluminum scrap supported by documentary evidence like copies of sale invoices.

Case is deferred.

191

Case No.:59/3/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00533/AM21/
RLA File :05/24/040/00181/AM21/
Lic.No/Date:0510414671 21.07.2020 Pending with Firm following information as per comments of DPIIT vide U. O. No.: P-47012/15/2020-TSW dated 29.09.2020:

  1. Recovery from Aluminium /Aluminium Alloy scrap generated during the manufacturing process with sale price of aluminum scrap supported by documentary evidence like copies of sale invoices.

Case is deferred.

58| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

192

Case No.:60/3/80-ALC2/2020

Party Name: GOLD MOHUR PROFILES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00534/AM21/
RLA File :05/23/040/00083/AM21/
Lic.No/Date:0510414672 21.07.2020

Decision: The Committee considered the case as per the agenda and noted that the firm has sent copy of application instead of reply of deficiency letter. Therefore, the Committee decided to remind the firm for furnishing the following information as advised by Consultant (Tech-1):

  1. Details of indigenous input with their quantity.
  2. Net weight of rubber compound in each of the export product.

Case is deferred.

193

Case No.:63/3/80-ALC2/2020

Party Name: I-TECH PLAST INDIA PVT.LTD.(EOU) Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00537/AM21/
RLA File :03/94/040/00256/AM21/
Lic.No/Date:0310837308 22.07.2020 Pending with Firm following information as per comments of Consultant (Tech-1):

  1. Generic name of export and import items.
  2. Catalogue of import item with specification.
  3. Weight of export item and net content of import item in it.
  4. Details of indigenous input with quantity.

Case is deferred.

194

Case No.:64/3/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00538/AM21/
RLA File :34/24/040/00095/AM21/
Lic.No/Date:3410046237 22.07.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.08.2020 followed by a reminder on 28.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind

Case is deferred.

195

Case No.:3/5/80-ALC2/2020

Party Name: DANIEL MEASUREMENT SOLUTIONS P LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00553/AM21/
RLA File :34/24/040/00117/AM21/
Lic.No/Date:3410046279 11.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 14.10.2020. However, no information has been received yet. Hence, the Committee decided to wait for the complete set of application for examination of the case.

Case is deferred.

59| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

196

Case No.:4/5/80-ALC2/2020

Party Name: S K INDUSTRIES Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00554/AM21/
RLA File :34/24/040/00115/AM21/
Lic.No/Date:3410046283 11.08.2020 Pending with Firm following information as per written comments of MSME:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  2. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete

Case is deferred.

197

Case No.:6/5/80-ALC2/2020

Party Name: AUTOCOMP CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00556/AM21/
RLA File :31/83/040/00043/AM21/
Lic.No/Date:3110067819 13.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

198

Case No.:1/7/80-ALC2/2020

Party Name: AUTOCOMP CORPORATION PANSE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00612/AM21/
RLA File :31/83/040/00042/AM21/
Lic.No/Date:3110067818 13.08.2020 Pending with Firm yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

199

Case No.:5/5/80-ALC2/2020

Party Name: TAIKISHA ENGINEERING INDIA PVT.LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00555/AM21/
RLA File :03/95/040/00275/AM21/
Lic.No/Date:0310837658 14.08.2020 Pending with Firm following information as per written comments of Consultant (SKB) & MSME:

60| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. Chemical composition of Flat Rolled Sheets/Plates and its equivalent Indian Standard.
  2. Neat sketch /drawing of each export item indicating thickness of sheet/plate, area of blank (Raw material), quantity in numbers, weight of blank (Raw Material), weight offinished product which could justify wastage indicated in the application and also brief process of manufacturing in few steps on sketch/drawing.
  3. Is there any requirement of indigenous raw material for manufacturing of export product?
  4. Stage wise wastage on manufacturing of export product.
  5. To submit excel sheet of calculations.

Case is deferred.

200

Case No.:11/5/80-ALC2/2020

Party Name: VERTICE GLOBAL PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00561/AM21/
RLA File :09/24/040/00248/AM21/
Lic.No/Date:0910069043 14.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 16.10.2020. However, no information has been received yet. The Committee also decided to send a letter to the firm by postfor submitting the complete set of application.

Case is deferred.

201

Case No.:7/5/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00557/AM21/
RLA File :05/24/040/00226/AM21/
Lic.No/Date:0510414900 17.08.2020

Decision: The Committee considered the case as per the agenda and decided to refer the case to DPIIT for examination & comments.

Case is deferred.

202

Case No.:8/5/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00558/AM21/
RLA File :05/24/040/00227/AM21/
Lic.No/Date:0510414902 17.08.2020

Decision: The Committee considered the case as per the agenda and decided to refer the case to DPIIT for examination & comments.

Case is deferred.

203

Case No.:9/5/80-ALC2/2020

Party Name: RADISH TECHNOLOGIES Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00559/AM21/
RLA File :06/24/040/00031/AM21/
Lic.No/Date:0610039581 18.08.2020 Pending with Firm

Case is deferred.

61| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

204

Case No.:10/5/80-ALC2/2020

Party Name: MAGNA AUTOMOTIVE INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00560/AM21/
RLA File :04/24/040/00066/AM21/
Lic.No/Date:0410166966 19.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 30.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

205

Case No.:12/5/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00562/AM21/
RLA File :34/24/040/00128/AM21/
Lic.No/Date:3410046299 19.08.2020 Pending with Firm

Case is deferred.

206

Case No.:13/5/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00563/AM21/
RLA File :34/24/040/00129/AM21/
Lic.No/Date:3410046300 19.08.2020 Pending with Firm

Case is deferred.

207

Case No.:14/5/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00564/AM21/
RLA File :34/24/040/00131/AM21/
Lic.No/Date:3410046301 19.08.2020 Pending with Firm

Case is deferred.

62| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

208

Case No.:15/5/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00565/AM21/
RLA File :34/24/040/00130/AM21/
Lic.No/Date:3410046302 19.08.2020 Pending with Firm

Case is deferred.

209

Case No.:16/5/80-ALC2/2020

Party Name: APAR INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00566/AM21/
RLA File :03/94/040/00279/AM21/
Lic.No/Date:0310837819 20.08.2020 Pending with Firm following information as per comments of MeitY:

  1. Details of export product in terms of technical write-up, design and calculations.
  2. Quantity of import items required for manufacturing one unit of export product.
  3. Calculations on per unit requirements of import items for manufacturing one unit of export product without wastage.
  4. Wastage claimed in the manufacturing process.
  5. Justification of wastage.

Case is deferred.

210

Case No.:17/5/80-ALC2/2020

Party Name: FITWEL GASKET COMPANY (INDIA) PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00567/AM21/
RLA File :31/83/040/00050/AM21/
Lic.No/Date:3110067828 20.08.2020

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-3) on 21.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

211

Case No.:18/5/80-ALC2/2020

Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00568/AM21/
RLA File :34/24/040/00134/AM21/
Lic.No/Date:3410046308 20.08.2020 Pending with Firm

Case is deferred.

63| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

212

Case No.:19/5/80-ALC2/2020

Party Name: NUCON AMETRA ELECTRONICS SYSTEMS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00569/AM21/
RLA File :09/24/040/00251/AM21/
Lic.No/Date:0910069073 20.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 14.10.2020. However, no information

Case is deferred.

213

Case No.:20/5/80-ALC2/2020

Party Name: DEE DEVELOPMENT ENGINEERS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00570/AM21/
RLA File :05/23/040/00134/AM21/
Lic.No/Date:0510414969 21.08.2020

yet been received from the firm and in this regard, an email was sent on 14.10.2020. However, no information

Case is deferred.

214

Case No.:21/5/80-ALC2/2020

Party Name: AAVID THERMALLOY INDIA PVT. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00571/AM21/
RLA File :34/24/040/00136/AM21/
Lic.No/Date:3410046312 24.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 15.10.2020. However, no information

Case is deferred.

215

Case No.:22/5/80-ALC2/2020

Party Name: ADITYA AUTO COMPONENTS Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00572/AM21/
RLA File :07/24/040/00141/AM21/
Lic.No/Date:0710116924 24.08.2020 Pending with Firm yet been received from the firm and in this regard, an email was sent on 15.10.2020. However, no information

Case is deferred.

64| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

216

Case No.:23/5/80-ALC2/2020

Party Name: HANNING MOTORS INDIA P. LTD. Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Withdrawn HQ File :01/80/050/00573/AM21/
RLA File :34/24/040/00138/AM21/
Lic.No/Date:3410046317 24.08.2020

Decision: The Committee considered the case as per agenda and noted that the case was already approved in Meeting No. 05/80 dated 10.09.2020. Therefore, the Committee decided to withdraw the case from the agenda. Case is withdrawn.

217

Case No.:24/5/80-ALC2/2020

Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00574/AM21/
RLA File :34/24/040/00139/AM21/
Lic.No/Date:3410046323 25.08.2020 Pending with Firm

Case is deferred.

218

Case No.:25/5/80-ALC2/2020

Party Name: NEO STRUCTO CONSTRUCTION PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00575/AM21/
RLA File :52/24/040/00036/AM21/
Lic.No/Date:5210043502 25.08.2020 Pending with Tech-3 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-3) on 29.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

219

Case No.:2/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00613/AM21/
RLA File :09/24/040/00299/AM21/
Lic.No/Date:0910069174 14.09.2020 Pending with Firm

Case is deferred.

220

Case No.:3/7/80-ALC2/2020

Party Name: AVLIGHT AUTOMOTIVES PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00614/AM21/
RLA File :05/23/040/00177/AM21/
Lic.No/Date:0510415224 15.09.2020 Pending with Firm

Case is deferred.

65| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

221

Case No.:4/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00615/AM21/
RLA File :09/24/040/00327/AM21/
Lic.No/Date:0910069183 15.09.2020 Pending with Firm

Case is deferred.

222

Case No.:5/7/80-ALC2/2020

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00616/AM21/
RLA File :02/24/040/00076/AM21/
Lic.No/Date:0210210109 16.09.2020 Pending with Firm

Case is deferred.

223

Case No.:6/7/80-ALC2/2020

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00617/AM21/
RLA File :02/24/040/00077/AM21/
Lic.No/Date:0210210110 16.09.2020 Pending with Firm

Case is deferred.

224

Case No.:7/7/80-ALC2/2020

Party Name: MASU BRAKE PADS PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00618/AM21/
RLA File :05/24/040/00289/AM21/
Lic.No/Date:0510415237 17.09.2020 Pending with Firm

Case is deferred.

225

Case No.:8/7/80-ALC2/2020

Party Name: VICTORA AUTO PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00619/AM21/
RLA File :05/24/040/00290/AM21/
Lic.No/Date:0510415243 17.09.2020 Pending with Firm

Case is deferred.

66| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

226

Case No.:9/7/80-ALC2/2020

Party Name: MOC SHIPYARDS PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00620/AM21/
RLA File :03/95/040/00367/AM21/
Lic.No/Date:0310838353 18.09.2020 Pending with Firm

Case is deferred.

227

Case No.:10/7/80-ALC2/2020

Party Name: MOC SHIPYARDS PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00621/AM21/
RLA File :03/95/040/00370/AM21/
Lic.No/Date:0310838354 18.09.2020 Pending with Firm

Case is deferred.

228

Case No.:11/7/80-ALC2/2020

Party Name: PERMANENT MAGNETS LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00622/AM21/
RLA File :03/95/040/00375/AM21/
Lic.No/Date:0310838373 18.09.2020 Pending with Firm

Case is deferred.

229

Case No.:12/7/80-ALC2/2020

Party Name: AVLIGHT AUTOMOTIVES PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00623/AM21/
RLA File :05/23/040/00166/AM21/
Lic.No/Date:0510415251 18.09.2020 Pending with Firm

Case is deferred.

230

Case No.:13/7/80-ALC2/2020

Party Name: SPARECO INDIA Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00624/AM21/
RLA File :05/24/040/00271/AM21/
Lic.No/Date:0510415264 18.09.2020 Pending with Firm

Case is deferred.

67| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

231

Case No.:14/7/80-ALC2/2020

Party Name: ARIHANT INDUSTRIES Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00625/AM21/
RLA File :33/24/040/00012/AM21/
Lic.No/Date:3310030743 18.09.2020 Pending with Firm

Case is deferred.

232

Case No.:15/7/80-ALC2/2020

Party Name: TEGA INDUSTRIES LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00626/AM21/
RLA File :02/24/040/00080/AM21/
Lic.No/Date:0210210115 21.09.2020 Pending with Firm

Case is deferred.

233

Case No.:16/7/80-ALC2/2020

Party Name: SULZER PUMPS INDIA LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00627/AM21/
RLA File :03/95/040/00376/AM21/
Lic.No/Date:0310838403 21.09.2020 Pending with Firm

Case is deferred.

234

Case No.:17/7/80-ALC2/2020

Party Name: BPE BIOTREE INDIA PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00628/AM21/
RLA File :07/24/040/00164/AM21/
Lic.No/Date:0710117046 22.09.2020 Pending with Firm

Case is deferred.

235

Case No.:18/7/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00629/AM21/
RLA File :05/24/040/00307/AM21/
Lic.No/Date:0510415296 23.09.2020 Pending with Firm

Case is deferred.

68| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

236

Case No.:19/7/80-ALC2/2020

Party Name: SIRIA IMPEX PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00630/AM21/
RLA File :05/24/040/00210/AM20/
Lic.No/Date:0510415290 23.09.2020 Pending with Firm

Case is deferred.

237

Case No.:23/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00634/AM21/
RLA File :09/24/040/00347/AM21/
Lic.No/Date:0910069252 23.09.2020 Pending with Firm

Case is deferred.

238

Case No.:20/7/80-ALC2/2020

Party Name: GODREJ & BOYCE MFG. CO. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00631/AM21/
RLA File :03/94/040/00427/AM21/
Lic.No/Date:0310838433 24.09.2020 Pending with Firm

Case is deferred.

239

Case No.:21/7/80-ALC2/2020

Party Name: PREMIER INDUSTRIAL CORPORATION LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00632/AM21/
RLA File :03/95/040/00144/AM21/
Lic.No/Date:0310838440 24.09.2020 Pending with Firm

Case is deferred.

240

Case No.:24/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00635/AM21/
RLA File :09/24/040/00348/AM21/
Lic.No/Date:0910069258 24.09.2020 Pending with Firm

Case is deferred.

69| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

241

Case No.:22/7/80-ALC2/2020

Party Name: MICRON INSTRUMENTS PVT LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00633/AM21/
RLA File :05/24/040/00313/AM21/
Lic.No/Date:0510415334 25.09.2020 Pending with Firm

Case is deferred.

242

Case No.:25/7/80-ALC2/2020

Party Name: PARAS DEFENCE AND SPACE TECHNOLOGIES LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00636/AM21/
RLA File :03/95/040/00380/AM21/
Lic.No/Date:0310838477 25.09.2020 Pending with Firm

Case is deferred.

243

Case No.:26/7/80-ALC2/2020

Party Name: ENDRESS AND HAUSER (INDIA) AUTOMATION INSTRU- Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00637/AM21/
RLA File :03/94/040/00434/AM21/
Lic.No/Date:0310838480 25.09.2020 Pending with Firm

Case is deferred.

244

Case No.:27/7/80-ALC2/2020

Party Name: HANNING MOTORS INDIA P LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00638/AM21/
RLA File :34/24/040/00161/AM21/
Lic.No/Date:3410046420 25.09.2020

written comments of MSME as under:

  1. Quantity of relevant import items at Sl. No. 1 to 7 may be allowed as per GN-4.
  2. Quantity of relevant import item at Sl. No. 8 may be allowed as 1.05 Kgs/Kg content in the export product.
  3. Quantity of relevant import item at Sl. No. 9 may be allowed as 1.01 Kgs/Kg content in the export product.

70| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

245

Case No.:28/7/80-ALC2/2020

Party Name: HANNING MOTORS INDIA P LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Approved HQ File :01/80/050/00639/AM21/
RLA File :34/24/040/00160/AM21/
Lic.No/Date:3410046421 25.09.2020

written comments of MSME as under:

  1. Quantity of relevant import items at Sl. No. 1 to 5 may be allowed as per GN-4.
  2. Quantity of relevant import item at Sl. No. 6 may be allowed as 1.01Kgs/Kg content in the export product.
  3. Quantity of relevant import items at Sl. No. 7 to 12 may be allowed as 1.05Kgs/Kg content in the export product.

246

Case No.:29/7/80-ALC2/2020

Party Name: DILIGENT SCM SOLUTIONS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00640/AM21/
RLA File :09/24/040/00268/AM21/
Lic.No/Date:0910069273 29.09.2020 Pending with Firm

Case is deferred.

247

Case No.:30/7/80-ALC2/2020

Party Name: DILIGENT SCM SOLUTIONS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00641/AM21/
RLA File :09/24/040/00357/AM21/
Lic.No/Date:0910069275 30.09.2020 Pending with Firm

Case is deferred.

248

Case No.:31/7/80-ALC2/2020

Party Name: DILIGENT SCM SOLUTIONS PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00642/AM21/
RLA File :09/24/040/00284/AM21/
Lic.No/Date:0910069276 30.09.2020 Pending with Firm

Case is deferred.

71| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

249

Case No.:32/7/80-ALC2/2020

Party Name: DEE DEVELOPMENT ENGINEERS LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00643/AM21/
RLA File :05/23/040/00205/AM21/
Lic.No/Date:0510415387 01.10.2020 Pending with Firm

Case is deferred.

250

Case No.:33/7/80-ALC2/2020

Party Name: STERLITE POWER TRANSMISSION LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00644/AM21/
RLA File :03/95/040/00355/AM21/
Lic.No/Date:0310838632 01.10.2020

Decision: The Committee considered the case as per the agenda and decided to refer the case to MeitY for examination & comments.

Case is deferred.

251

Case No.:34/7/80-ALC2/2020

Party Name: BPE BIOTREE INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00645/AM21/
RLA File :07/24/040/00171/AM21/
Lic.No/Date:0710117086 01.10.2020 Pending with Firm

Case is deferred.

252

Case No.:35/7/80-ALC2/2020

Party Name: PARAS DEFENCE AND SPACE TECHNOLOGIES LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00646/AM21/
RLA File :03/95/040/00406/AM21/
Lic.No/Date:0310838691 05.10.2020 Pending with Firm

Case is deferred.

253

Case No.:36/7/80-ALC2/2020

Party Name: PARAS DEFENCE AND SPACE TECHNOLOGIES LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00647/AM21/
RLA File :03/95/040/00407/AM21/
Lic.No/Date:0310838692 05.10.2020 Pending with Firm

Case is deferred.

72| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

254

Case No.:37/7/80-ALC2/2020

Party Name: PARAS DEFENCE AND SPACE TECHNOLOGIES LTD Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00648/AM21/
RLA File :03/95/040/00412/AM21/
Lic.No/Date:0310838693 05.10.2020 Pending with Firm

Case is deferred.

255

Case No.:38/7/80-ALC2/2020

Party Name: AUSA MEDICAL DEVICES PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00649/AM21/
RLA File :07/24/040/00183/AM21/
Lic.No/Date:0710117089 05.10.2020 Pending with Firm

Case is deferred.

256

Case No.:39/7/80-ALC2/2020

Party Name: AUSA MEDICAL DEVICES PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00650/AM21/
RLA File :07/24/040/00184/AM21/
Lic.No/Date:0710117090 05.10.2020 Pending with Firm

Case is deferred.

257

Case No.:40/7/80-ALC2/2020

Party Name: AUSA MEDICAL DEVICES PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00651/AM21/
RLA File :07/24/040/00186/AM21/
Lic.No/Date:0710117091 05.10.2020 Pending with Firm

Case is deferred.

73| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

258

Case No.:41/7/80-ALC2/2020

Party Name: AUSA MEDICAL DEVICES PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00652/AM21/
RLA File :07/24/040/00182/AM21/
Lic.No/Date:0710117092 05.10.2020 Pending with Firm

Case is deferred.

259

Case No.:42/7/80-ALC2/2020

Party Name: DOOWON CLIMATE CONTROL INDIA PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00653/AM21/
RLA File :26/24/040/00007/AM21/
Lic.No/Date:2610012918 05.10.2020 Pending with Firm

Case is deferred.

260

Case No.:43/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00654/AM21/
RLA File :09/24/040/00367/AM21/
Lic.No/Date:0910069298 06.10.2020 Pending with Firm

Case is deferred.

261

Case No.:44/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00655/AM21/
RLA File :09/24/040/00368/AM21/
Lic.No/Date:0910069299 06.10.2020 Pending with Firm

Case is deferred.

262

Case No.:45/7/80-ALC2/2020

Party Name: APAR INDUSTRIES LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00656/AM21/
RLA File :03/94/040/00387/AM21/
Lic.No/Date:0310838718 06.10.2020 Pending with Firm

Case is deferred.

74| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

263

Case No.:46/7/80-ALC2/2020

Party Name: AUSA MEDICAL DEVICES PRIVATE LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00657/AM21/
RLA File :07/24/040/00185/AM21/
Lic.No/Date:0710117104 06.10.2020 Pending with Firm

Case is deferred.

264

Case No.:47/7/80-ALC2/2020

Party Name: VICTORA AUTO PVT. LTD. Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00658/AM21/
RLA File :05/24/040/00332/AM21/
Lic.No/Date:0510415444 08.10.2020 Pending with Firm

Case is deferred.

265

Case No.:48/7/80-ALC2/2020

Party Name: ISGEC HEAVY ENGINEERING LIMITED Meet No/Date:7/80- Status: Deferred HQ File :01/80/050/00659/AM21/
RLA File :05/23/040/00214/AM21/
Lic.No/Date:0510415447 08.10.2020 Pending with Firm

Case is deferred.

266

Case No.:49/7/80-ALC2/2020

Party Name: NUCON AEROSPACE PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00660/AM21/
RLA File :09/24/040/00374/AM21/
Lic.No/Date:0910069307 08.10.2020 Pending with Firm

Case is deferred.

267

Case No.:50/7/80-ALC2/2020

Party Name: AZAD ENGINEERING PRIVATE LIMITED Meet No/Date:7/80- ALC2/2020 22.10.2020 Status: Deferred HQ File :01/80/050/00661/AM21/
RLA File :09/24/040/00326/AM21/
Lic.No/Date:0910069313 08.10.2020 Pending with Firm

Case is deferred.

75| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Minutes of Manual Cases Sl. No. 42

Case No. 36/21/80-ALC2/2016

NAVKAR FITTINGS & FORGINGS PVT. LTD. Status: Deferred M. No.: 7/80-ALC2/2020 dated 22.10.2020 Lic. No.: 0310808954 Date: 03.11.2016 HQ. No.: 01/80/050/00496/AM17

Subject: Request for fixation of ad-hoc norms

RLA No.: 03/95/040/00606/AM17 Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 04/80-ALC2/2017dated 23.05.2017 due to non-submission of reply of deficiency letter raised by DIPP vide UO No.12/13/2017-TSW/81 dated 02/03/2017.

             However, the firm had furnished the reply with a request to re-open the case and fix the ad-hoc norms.

The Committee noted that the firm’s representation was forwarded to MSME on 28.11.2018 followed by ID reminders on 17.09.2019, 10.01.2020 & 06.03.2020 for expediting the comments. On the advice of MSME, the Committee decided to refer the case to DPIIT for examination & comments.

Case is deferred.

Sl. No. 43

Case No. 2/4/80-ALC2/2015

Terumo Penpol Ltd. Status: Deferred Lic. No.: 5310008377 dated 28.05.2009 HQ. No.: 01/80/050/00073/AM16

Subject: Request for fixation of ad-hoc

norms Pending with Deptt. of C & PC RLA No.: 53/21/040/00002/AM10 Decision: The Committee considered the case as per the agenda and noted its decision of Meeting 11/19 date 30.11.2018 in which representative of MSME stated that the norms may be fixed on the basis of DIPP recommendation vide No. 07/9/20l6-TSW dt. 08.12.2017 for License No. 5310019514 dt. 05.10.2017 as ratified in Meeting No. 16/80 dated 14.11.2017. However, the Committee observed that the description of export item in the subject application does not exactly match with that appearing in the recommendation of DIPP and due to this it was requested to MSME to provide comments.

               Based on the deliberations & as per advice of MSME, the Committee decided that Consultant (Tech -
  1. to look into the issue. Hence, the case was referred to Consultant (Tech -1) on 16.10.2019 for examination & comments. Consultant (Tech-1) informed that a similar case of the firm has already been referred to PLEXCOUNCIL and Department of C & PC. PLEXCOUNCIL vide email dated 17.12.2019 had requested for 15 days time to reply the query and no information has been received from Deptt. of C & PC. The Committee noted that Deptt. ofC & PC and PLEXCOUNCIL were reminded on 12.02.2020 for the expediting the matter. PLEXCOUNCIL’s reply was received and forwarded to Consultant (Tech-1) on 11.03.2020 for examination of the case. However, Consultant (Tech-1) informed in the meeting that PLEXCONCIL reply mentions Acetic Anhydride as the export product, which does not make any sense. Hence, in this regard, a D.O. Letter was sent to JS Deptt. Of C&PC on 30.07.2020 to provide their comments in the matter at the earliest. However, no information has been received so far. Hence, the Committee decided to wait for requisite information to examine the case.

Case is deferred.

Sl. No. 44

Case No. 26/11/80-ALC2/2016

Dee Development Engineers Ltd. Status: Deferred Lic. No.: 0510398701 dated 01.06.2017 HQ. No.: 01/80/050/00299/AM17

Subject: Request for fixation of ad-hoc

norms Pending with Firm RLA No.: 05/23/040/00101/AM17 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 09/80 dated 01.08.2017 due to non-submission of reply of deficiency letter dated 19.04.2017.

             The Committee reconsidered the case and noted that DHI in its comments stated that the firm’s reply is

deficient. Therefore, the Committee decided to ask again form the firm to furnish the following information as per

76| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

comments of DHI:

  1. Starting from the specification of the export product, basic calculation as to how of raw material proposed
  2. Utilization of import item at SL. No. 11 in the export product.

Case is deferred.

Sl. No. 45

Case No. 21/6/80-ALC2/2016

Dee Development Engineers Ltd. Status: Deferred Lic. No.: 0510398216 dated 13.04.2016 HQ. No.: 01/80/050/00180/AM17

Subject: Request for fixation of ad-hoc

norms

RLA No.: 05/23/040/00015/AM17 No. 09/80 dated 01.08.2017 due to non-submission of reply of deficiency letter dated 19.04.2017.

             However, the firm had furnished the reply with a request to re-open case and fix the ad-hoc norms. The

Committee reconsidered the case and noted that firm’s reply against the deficiency letter raised by DPIIThas been received and is being erroneously sent to DHI. Therefore, the Committee decided to send the reply to DPIIT.

Case is deferred.

Sl. No. 46

Case No. 15/2/80-ALC2/2016

Deepeeka Exports Pvt. Ltd. Status: Approved Lic. No.: 0510396524 dated 04.12.2015 HQ. No.: 01/80/050/00018/AM17

RLA No.: 05/23/040/00371/AM16 No. 14/80 dated 11.10.2016 due to non-submission of reply of deficiency letter dated 04.08.2016.

The firm had requested for fixation of norms along with reply dated 12.12.2016. The Committee reconsidered the case and decided to fix the ad-hoc norms as per comments given by MSME via email dated 21.10.2020 as under:

ITCHS Code Export Item Quantity

Sl. No. ITCHS
Code Import Item Recommended Norms 93070000 Sword / Sword Scabbards 3600 Number 1 41151000 Snow Leather Black 1.04 sq. ft/sq. ft net content of export product 2 41151000 Snow Leather Natural 1.04 sq. ft/sq. ft net content of export product Note: The firm should import relevant items only.

Sl. No. 47

Case No. 45/24/80-ALC2/2013

Kelvion India Pvt. Ltd. Status: Deferred Lic. No.: 0310766285 dated 15.01.2014 HQ. No.: 01/80/050/00522/AM14 Pending with Firm RLA No.: 03/94/040/00880/AM14 Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 22/80 dated 20.01.2015 due to non-submission of reply of deficiency letter dated 30.07.2014.

The firm furnished the reply vide letter dated 20.11.2017 with a request to fix the ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47012/271/2018-TSW dated 03.06.2020:

77| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. Detailed calculation as to how the quality of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawing etc.
  2. Sheet layout diagram of the material indicating the wastage during blanking.
  3. The gross weight of the blanks do not match with the size of blanks as indicated in the drawings e.g. as per drawing the gross weight for blank for import item at Sl. No. 1 comes out to be 1.618Kg as against 3.08Kgs, indicted in the drawing. The basis for the gross weights of blanks may be furnished supported by blanks size and size of export item.

Case is deferred.

Sl. No. 48

Case No. A/R 16/19

TATA Sikorsky Aerospace Ltd. Status: Deferred M. No.: 7/80- ALC2/2020 dated 22.10.2020 HQ. No.: 01/80/162/301/AM18/ DES-18

Subject: EOU- M/s. TATA Sikorsky Aerospace Ltd., LOP No. PER:

076/EOU/VSEZ/HYD/2011 dated 25.07.2011 for fixation of wastage norms for export product “Helicopter cabin kits & parts and accessories for Aircraft” against import items 1. Stainless Steel bars/rods 2. Stainless Steel Tube/Pipes 3. Stainless Steel round bars Pending with Firm Decision: The Committee considered the case as per the agenda and noted that the application of the firm was sent to DIPP on 10.07.2018 and also to DHI on 03.08.2018 for their examinations/comments. Since, they had stated that the export product is not under the purview of DIPP/DHl, so it was forwarded to MSME on 18.03.2019 followed by reminders on 24.09.2019, 10.01.2020 & 12.02.2020. The Committee decided to ask again form the firm to furnish the following information as per comments of MSME:

  1. To provide excel sheet of calculations.

Case is deferred.

Sl. No. 49

Case No. 67/2/80-ALC2/2016

ECOCAT INDIA PVT.LTD Status: Approved Lic. No.: 0510397548 dated 09.02.2016 HQ. No.: 01/80/050/00070/AM17

Subject: Request for fixation of ad-hoc

norms

RLA No.: 05/23/040/00472/AM16 Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 15/80 dated 06.03.2019 due to non-submission of reply of deficiency letter dated 11.10.2018.

          However, the firm vide their representation dated 20.07.2019 along with the reply of deficiency had

requested to fix the ad-hoc norms. The Committee reconsidered the case and decided to fix the ad-hoc norms as per comments given by MSME via email dated 21.10.2020 as under:

Sl. No.

ITCHS Code Export Item Quantity

Sl. No. ITCHS
Code Import Item Recommended Norms 1 84219900 Substrate Doc, D150X74.5, 200 cpsi Uncoated (Part of Catalytic Converter- Fltrng /PurfyngMchnry) Part No. 68272 30000 Number 1 7220909 0 Stainless Steel FOIL 1.4725 Cr Al4 foil soft 0.050X74. 50 mm As applied inclusive of 1% wastage. 2 84219900 SUBSTRATE DOC, D170X74.5, 200 cpsi Uncoated (Part of Catalytic Converter- Fltrng 30000 Number

78| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

/PurfyngMchnry) Part No. 67740 3 84219900 SUBSTRATE DOC, D90X74.5, 120 cpsi Uncoated (Part of Catalytic Converter- Fltrng /PurfyngMchnry) Part No. 69635 1500 Number 2 7220909 0 Stainless Steel Foil 1.4725 Cr Al4 foil soft 0.050X150 .0 mm As applied inclusive of 1% wastage. 4 84219900 SUBSTRATE DOC, D125X74.5, 200 cpsi Uncoated (Part of Catalytic Converter- Fltrng /PurfyngMchnry) Part No. 69252 1500 Number 3 7220909 0 Stainless Steel Foil 1.4725 Cr Al4 foil soft 0.050X120 .0 mm As applied inclusive of 1% wastage. 5 84219900 SUBSTRATE DOC, D110X150, 350 cpsi Uncoated (Part of Catalytic Converter- Fltrng /PurfyngMchnry) Part No. 69379 1500 Number 6 84219900 SUBSTRATE DOC, D100.5X120, 350 cpsi Uncoated (Part of Catalytic Converter- Fltrng /PurfyngMchnry) Part No. 69378 15000 Number Note: The firm should import relevant items only.

Sl. No. 50

Case No. 27/9/80-ALC2/2017

TERUMO PENPOL PRIVATE LIMITED Status: Deferred Lic. No.: 5310019417 dated 15.06.2017 HQ. No.: 01/80/050/00205/AM18

Subject: Request for fixation of ad-hoc

norms Pending with Deptt. of C & PC RLA No.: 53/24/040/00003/AM18 Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 03/80 dated 09.05.2018 as per written comments of DIPP (TSW section) vide letter No.: 07/9/2016-TSW dated 08.12.2017. However the firm requested to re-fix the norms and also allow them for Personal Hearing.

In continuation to Meeting 09/80 dated 14.09.2019, the Committee noted that the firm appeared for PH in its Meeting 09/80 dated 14.09.2019 and explained the reason for higher wastage claimed. Based on the deliberations, the Committee decided that Consultant (Tech 1) to look into the issue.

Consultant (Tech-1) pointed out that firm is requesting to increase the wastage norms for PVC compound from 10% to 16% on the basis of Deptt. of C&PC suggestion vide letter dated 10.09.2012 for amending the SION H-67 and AA of the firm has been ratified on the basis of SION H-67 which allows for only 10%. Consultant (Tech 1) suggested that PLEXCOUNCIL may be requested to provide Production/Consumption data of other manufacturers.

The Committee noted that the case was referred to PLEXCOUNCIL &Deptt. Of C & PC on 18.10.2019 & 05.11.2019 respectively. However, PLEXCOUNCIL vide email dated 17.12.2019 had requested for 15 days time to reply the query and no information has been received from Deptt. Of C&PC. The Committee noted that Deptt. of C&PC and PLEXCOUNCIL were reminded on 12.02.2020 for the expediting the matter. PLEXCOUNCIL’s reply was received and forwarded to Consultant (Tech-1) on 11.03.2020 for examination of the case. However, Consultant (Tech-1) informed in the meeting that PLEXCONCIL reply mentions Acetic Anhydride as the export product, which does not make any sense. Hence, in this regard a D.O. Letter was sent to JS Deptt. of C & PC on 30.07.2020 to provide their comments in the matter at the earliest. However, no information has been received so far. Hence, the Committee decided to wait for requisite information to examine the case. Case is deferred.

79| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 51

Case No. :24/19/80-ALC2/2014

M/s SHAKTI PUMPS (INDIA) LTD. Status: Deferred Lic. No. /date: 5610004450 Date: 21.10.2014 HQ. No.: 01/80/050/00458/AM15

Subject: Request for re-fixation of ad-hoc

norms Pending with Firm RLA No.: 56/24/040/00042/AM15 Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 5/80-ALC2/2016dated 07.06.2016as per recommendation of DIPP vide ID Note No. 12/46/2016-TSW/11 dated 03.06.2016. However, the firm had requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 07.03.2020 followed by a reminder on 15.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Sl. No. 52

Case No. :No.:9/12/80-ALC2/2017

SMC PNEUMATICS (INDIA) PRIVATE LIMITED Status: Deferred Lic. No. /date: 0510403402 dated 14.07.2017 HQ. No.: 01/80/050/00223/AM18 norms Pending with DPIIT RLA No.: 05/24/040/00172/AM18 Decision: The Committee considered the case as per the agenda noted that the case was approved in M. No. 3/80- ALC2/2016 dated 09.05.2018 as per recommendation of DHI, DIPP and MSME present in the meeting.

             However, the firm had requested for re-fixation of ad-hoc norms. The Committee reconsidered the case

and noted that the recommendation of Consultant (Tech-3) was sent to DPIIT on 08.07.2020 as similar cases were examined/ recommended by them. However, DPIIT on 02.09.2020 requested further information and the same was sent to DPIIT on 07.10.2020 and some other information received from the firm was also forwarded to DPIIT on 16.10.2020. Therefore, the Committee decided to wait for comments.

Case is deferred.

Sl. No. 53

Case No. :16/8/80-ALC2/2018

M/s. SMC PNEUMATICS (INDIA) PRIVATE LIMITED Status: Deferred Lic. No.: 0510407130 Date: 09.07.2018 HQ. No.: 01/80/050/139/AM19 norms Pending with MSME/DPIIT RLA No.: 05/24/040/00207/AM19 Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 4/80-ALC2/2019 dated 22.05.2018 as per written comments of DPIIT vide U. O. No.: P-47011/289/2018-TSW dated 25.04.2019.

However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that the recommendation of Consultant (Tech-3) was sent to DPIIT on 08.07.2020 as similar cases were examined/ recommended by them. However, DPIIT on 02.09.2020 requested further information and the same was sent to DPIIT on 07.10.2020 and some other information received from the firm was also forwarded to DPIIT on 16.10.2020. Therefore, the Committee decided to wait for comments.

Case is deferred.

80| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 54

Case No. 41/3/80-ALC2/2015

Y-TEC INDIA PVT. LTD. Status: Deferred Lic. No.: 0510393093 dated 05.02.2015 HQ. No.: 01/80/050/00041/AM16 Pending with Firm RLA No.: 05/24/040/00523/AM15 Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 18/80 dated 08.12.2015 due to non-submission of reply of deficiency letter dated 22.06.2015.

             However, the firm vide letter dated 20.12.2018 submitted the representation with a request to fix the ad-

hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on 22.11.2019 followed by reminders on 07.03.2020 & 15.10.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15days.

Case is deferred.

Sl. No. 55

Case No.: 39/5/80-ALC2/2017

L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Status: Deferred Lic. No. /date: 0310813078 Date: 05.05.2017 HQ. No.: 01/80/050/00100/AM18 norms Pending with DHI RLA No.: 03/95/040/01041/AM17 Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 15/80-ALC2/2018 dated 06.03.2019 as per the written comments of DHI vide their U.O. No. DES-I/L&T/Tu-1- 2018-HEI dated 24.12.2018.

However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that the firm’s reply was sent to DHIfor examination of the case on 15.06.2020 followed by a reminder on 15.10.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred.

Sl. No. 56

Case No.: 13/16/80-ALC2/2017

L & T-MHPS TURBINE GENERATORS PRIVATE LIMITED Status: Deferred Lic. No. /date: 0310815484 Date: 01.09.2017 HQ. No.: 01/80/050/00276/AM18 Pending with DHI RLA No.: 03/95/040/00052/AM18 No. 06/80-ALC2/2018 dated 11.07.2018 on the ground that the parts of the import items given (Unit of Measurement) in sets and number of parts in each set and their composition is not known. The Committee found that it was very difficult to enforce accountability and rejected the case.

However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that the firm’s reply was sent to DHIfor examination of the case on 21.02.2020 followed by a reminder on 15.10.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

81| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 57

Case No.: 46/24/80-ALC2/2012

BHARAT HEAVY ELECTRICALS LIMITED Status: Approved Lic. No.: 0410112044 dated.02.03.2011

Subject: Request for revision of ad-hoc norms

HQ File No: 01/80/050/00819/AM10/ RA.F.No.04/24/040/00290/AM10 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No.07/80 dated 25.06.2013 as per written of DHI UO No. 3(23)/13-TSW(B)/89 dated 6.5.2013.

         The firm vide letter dated 17.10.2019 requested for revision of ad-hoc norms. The firm stated that they have not

requested DGFT to amend the UOM as “Number” for the items which have UOM as “SET”. Based on their requirement, they have only provided the break-up details. The firm has further stated that the quantity of material they have imported in terms of “Number” is same as that they have declared to DGFT earlier. Now, they have requested to revise Unit of Measurement (UoM).

The Committee reconsidered the case and noted the comments of DPIIT wherein it is stated that earlier norms were recommended based on the information submitted by the firm at that time. Now, the firm has stated that at that time project was in initial stage and the exact details were not available with them. Now they have given the details as per actual. Hence, the norms have been revised. In view of DPIIT comments, the Committee decided to re-fix the ad-hoc norms as per written comments of DPIIT vide U. O. No.: P-47011/390/2018-TSW dated 02.09.2020. (Copy enclosed)

Sl. No. 58

Case No.: 53/2/80-ALC2/2016

ALSTOM INDIA LIMITED Status: Deferred Lic. No. /date: 0310795652 Date: 30.04.2015 HQ. No.: 01/80/050/00056/AM17/ Pending with Firm RLA No.: 03/94/040/00060/AM16/ Decision: The Committee considered the case as per the agenda and noted that the case was rejected in M. No. 20/80-ALC2/2016 dated 03.01.2017 due to non-submission of reply of deficiency letter dated 24.10.2016 raised by DHI.

The firm vide letter dated 28.09.2019 had requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 11.03.2020 followed by a reminder on 23.09.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15days.

Case is deferred.

Sl. No. 59

Case No.: 58/12/80-ALC2/2014

Kelvion India Pvt. Ltd. (Formerly Known as GEA ECOFLEX INDIA PVT. LTD.) Status: Deferred Lic. No. /date: 3110064489 Date: 27.06.2014 HQ. No.: 01/80/050/00307/AM15/ Pending with Firm RLA No.: 31/83/040/00082/AM15 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in M. No. 3/80-ALC2/2015 dated 12.05.2015 due to non-submission of reply of deficiency letter dated 07.10.2014.

The firm vide letter dated 02.11.2019 had furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/15/2020-TSW dated 03.06.2020:

  1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
  2. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s).

82| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

  1. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares.
  2. Detailed calculation as to how the quality of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawing etc.

Case is deferred.

Sl. No. 60

Case No.: 10/8/80-ALC2/2015

Kelvion India Pvt. Ltd. (Formerly Known as GEA ECOFLEX INDIA PVT. LTD.) Status: Deferred Lic. No. /date: 0310795103 Date: 06.04.2015 HQ. No.: 01/80/050/00116/AM16 Pending with Firm RLA No.: 03/94/040/01169/AM15 No. 20/80-ALC2/2015 dated 05.01.2016 due to non-submission of reply of deficiency letter dated 22.09.2015 raised by DIPP. The firm vide letter dated 02.11.2019 had furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/15/2020-TSW dated 03.06.2020:

  1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
  2. Detailed calculation as to how the quality of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawing etc.
  3. Sheet layout diagram of the material indicating the wastage during blanking.
  4. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares.
  5. Basis for the gross weight of 7.337Kgs for Blank Sheet supported by blank size of the plate (Component).

Case is deferred.

Sl. No. 61

Case No.: 39/22/80-ALC2/2014

Kelvion India Pvt. Ltd. (Formerly Known as GEA ECOFLEX INDIA PVT. LTD.) Status: Deferred Lic. No. /date: 0310789333 Date: 17.09.2014 HQ. No.: 01/80/050/00520/AM15/ Pending with Firm RLA No.: 03/94/040/00580/AM15/ Decision: The Committee considered the case as per the agenda and noted that the case was rejected in M. No. 10/80-ALC2/2015 dated 17.08.2015 due to non-submission of reply of deficiency letter dated 20.03.2015 raised by DIPP.

            The firm vide letter dated 02.11.2019 had furnished the reply and requested for fixation of ad-hoc norms.

The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/15/2020-TSW dated 03.06.2020:

  1. Detailed calculation as to how the quality of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawing etc.
  2. Blank size supported by size of component, separately for each component.
  3. Sheet layout diagram of the material indicating the wastage during blanking.

83| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Case is deferred.

Sl. No. 62

Case No.: 20/19/80-ALC2/2014

Kelvion India Pvt. Ltd. (Formerly Known as GEA ECOFLEX INDIA PVT. LTD.) Status: Deferred Lic. No. /date: 0310788788 Date: 05.09.2014 HQ. No.: 01/80/050/00454/AM15 Pending with Firm RLA No.: 03/94/040/00415/AM15 No. 4/80-ALC2/2015 dated 26.05.2015 due to non-submission of reply of deficiency letter dated 09.02.2015 raised by DIPP. The firm vide letter dated 02.11.2019 had furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/15/2020-TSW dated 03.06.2020: 2. Detailed calculation as to how the quality of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastage claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawing etc. 3. Blank size supported by size of component, separately for each component. 4. Sheet layout diagram of the material indicating the wastage during blanking.

Case is deferred.

Sl. No. 63

Case No.: 4/8/80-ALC2/2018

CHIRAG UDYOG Status: Deferred Lic. No. /date: 0510406909 Date: 19.06.2018 HQ. No.: 01/80/050/00127/AM19 norms Pending with Tech-3 RLA No.: 05/23/040/00141/AM19/ Decision: The Committee considered the case as per the agenda and noted that the case was approved in M. No. 10/80-ALC2/2019 dated 11.09.2019 on the basis of inputs given by the Technical Authorities present in the meeting.

The firm vide letter dated 21.10.2019 had requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 12.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Sl. No. 64

Case No.: 20/9/80-ALC2/2017

CORNING TECHNOLOGIES INDIA PVT. LTD. Status: Deferred Lic. No. /date: 0510403029 Date: 05.06.2017 HQ. No.: 01/80/050/00198/AM18/ norms Pending with MeitY RLA No.: 05/23/040/00081/AM18/ Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 11/80-ALC2/2018 dated 06.12.2018 as per the written comments of MeitY vide U. O. No. 17/ (18)/2017- IPHW dated 13.11.2018. However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that the firm’s representation forwarded to MeitY for examination of the case on 09.03.2020, 20.04.2020, 18.08.2020, 17.09.2020 & 06.10.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred.

84| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 65

Case No.: 25/14/80-ALC2/2018

SPIROTECH HEAT EXCHANGERS PVT. LTD. Status: Deferred Lic. No. /date: 0510386129 Date: 09.05.2014 HQ. No.: 01/80/050/00341/AM19

Subject: Request for re-fixation of ad-hoc norms

Pending with Firm RLA No.: 05/24/040/00051/AM15/ Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 14/80- ALC2/2018 dated 20.02.2019 as per written comments of DPIIT vide F. No.: P-47011/24/2019-TSW dated 20.02.2019. The firm vide letter dated 22.04.2019 had requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P- 47011/24/2019-TSW dated 23.04.2020: 1. To clarify, the fractional requirement of the import items at Sl. No. 5, 7 & 8 per unit of export item. 2. For import items at Sl. No. 5, 7 & 8: Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 3. For import items at Sl. No. 5, 7 & 8: Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables

Case is deferred.

Sl. No. 66

Case No.: 53/3/80-ALC2/2017

GL&V INDIA PRIVATE LIMITED Status: Deferred Lic. No. /date: 3110066640 Date: 29.03.2017 HQ. No.: 01/80/050/00053/AM18/ Pending with Firm RLA No.: 31/83/040/00185/AM17 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 7/80- ALC2/2019 dated 17.07.2019 due to non-submission of reply of deficiency letter dated 07.03.2019 raised by Consultant (Tech-3). The firm vide letter dated 30.12.2019 had furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and noted that a deficiency letter seeking certain information as raised by Consultant (Tech- 3) was sent to the firm on 12.10.2020. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Sl. No. 67

Case No.: 40/8/80-ALC2/2018

SARA SAE PRIVATE LIMITED Status: Approved Lic. No. /date: 6110001499 Date: 16.04.2018 HQ. No.: 01/80/050/00163/AM19

RLA No.: 61/24/040/00001/AM19 Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 15/80- ALC2/2019 dated 15.11.2019 due to non-submission of reply of deficiency letter dated 06.05.2019 raised by MSME. The firm vide letter dated 01.02.2020 had furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to fix the ad-hoc norms as per comments given by MSME via email dated 21.10.2020 as under:

ITCHS Code Export Item Quantity

ITCHS
Code Import Item Recommended Norms 84841090 Metal Seal Fx Body F/5-10k Torus III Connector Incoloy 825 Silver Plated 5.187 ID For Use W/Two Od S Seals 17 Number 73079990 X 1524 mm Long (-0/+2mm) of 180mm Diameter A 825 Peeled K12 Tolerance Bar (Dia 180mm Inconel 825 = 01 No. = 1524mm = 370.32Kg) 210.23Kgs inclusive of 319% wastage after affecting 50% recovery from scrap. Note:
1. Per unit weight of export product is 2.95 Kg. 2. The firm should import relevant items only.

85| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 68

Case No.: 23/8/80-ALC2/2018

GE POWER INDIA LIMITED Status: Deferred Lic. No. /date: 0310821275 Date: 28.05.2018 HQ. No.: 01/80/050/00146/AM19

Subject: Request for re-fixation of ad-hoc norms

RLA No.: 03/94/040/00164/AM19 No. 4/80-ALC2/2019 dated 22.05.2019 due to non-submission of reply of deficiency letter dated 28.12.2018 raised by DHI.

            The firm vide letter dated 27.09.2019 had furnished the reply and requested for fixation of ad-hoc norms.

The Committee reconsidered the case and noted that the firm’s representation was inadvertently forwarded to MSME who advised referring the case to DHI for examination. Hence, the Committee decided to forward the case to DHI. Case is deferred.

Sl. No. 69

Case No.: 4/10/80-ALC2/2018

BHARAT HEAVY ELECTRICALS LIMITED Status: Approved Lic. No. /date: 0410164525 Date: 24.07.2018 HQ. No.: 01/80/050/00190/AM19 norms

RLA No.: 04/24/040/00061/AM19 Decision: The Committee considered the case as per the agenda and noted that the case was approved (with deletion of items at Sl. No. 10 to 15) in Meeting No. 16/80-ALC2/2019 dated04.12.2019 on the recommendation of the representative of DHI.

            The firm vide letter dated 02.01.2020 had stated that items at Sl. No 13 and 14 are imported, while item

at Sl. No. 10, 11, 12, 15 are indigenously procured and hence requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted the comments of DHI wherein it is stated that the firm has requested for ratification of norms for deleted items. Therefore, as per comments of DHI, the Committee decided to revise the ad-hoc norms on repeat basis as approved for AA No. 0410115603 dated 19.07.2010 as under:

  1. Quantity of import item at Sl. No. 13 may be allowed with 5% wastage.
  2. Quantity of import item at Sl. No. 14 (Only bloom) may be allowed with 20% wastage. Note: The decision for rest of the import items shall remain unchanged as decided in Meeting No. 16/80- ALC2/2019 dated04.12.2019.

Sl. No. 70

Case No.: 48/1/80-ALC2/2019

             118/15/80-ALC2/2018

LMT TOOLS INDIA PRIVATE LIMITED Status: Deferred Lic. No. /date: 3110067349 Date: 12.03.2019 3110067025 Date: 06.04.2018 HQ. No.: 01/80/050/00796/AM19 01/80/050/00460/AM19 norms

RLA No.: 31/83/040/00189/AM19 31/83/040/00001/AM19 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 14/80-ALC2/2019 dated 06.11.2019 as per written comments given by Consultant (Tech-3).

The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 17/80- ALC2/2019 dated 18.12.2019 as per written comments given by Consultant (Tech-3).

86| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

            The firm vide letter dated 21.01.2020 had requested for re-fixation of ad-hoc norms. The Committee

reconsidered the case and noted that the firm’s representation was forwarded to Consultant (Tech-3) on 20.07.2020 followed by a reminder on 21.08.2020 for examination of the case. Further, additional information received from the firm was sent to Consultant (Tech-3) on 12.10.2020 & 14.10.2020. However, the Consultant (Tech-3) informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

Sl. No. 71

Case No.: 13/8/80-ALC2/2018

S AND P ENTERPRISES Status: Approved Lic. No. /date: 0410164514 Date: 20.07.2018 HQ. No.: 01/80/050/00136/AM19 norms

RLA No.: 04/24/040/00088/AM19 No. 2/80-ALC2/2019dated24.04.2019 due to non-submission of reply of deficiency letter dated 12.11.2018 (Raised by MSME).

            The firm vide their representation dated 14.11.2019 along with the reply of deficiency had requested to

fix the ad-hoc norms. The Committee reconsidered the case and decided to fix the ad-hoc norms as per comments given by MSME as under:

Sl. No.

ITCHS Code Export Item Quantity

Sl. No. ITCHS
Code Import Item Recommended Norms 1 87089900 Auto Part Heat Insulator 420-001 9360 Number 1 68069000 Heat Insulator Mat 419-001 142.60 Kgs inclusive of 0.26% wastage. 2 87089900 Auto Part Heat Insulator 420-206 1865 Number 2 68069000 Heat Insulator Mat 419-003 237.30 Kgs inclusive of 0.20% wastage Note:

  1. Per unit weight of Sl. No. 1 & 2 of export is 15.20 Gram & 127.00 Gram respectively.
  2. The firm should import relevant items only.

Sl. No. 72

Case No.: 21/8/80-ALC2/2015

GESTEK ENGINEERING PRIVATE LIMITED Status: Deferred Lic. No. /date: 0510394420 Date: 03.06.2015 HQ. No.: 01/80/050/00127/AM16 norms

RLA No.: 05/23/040/00070/AM16 No. 6/80-ALC2/2016 dated 21.06.2016 due to non-submission of reply of deficiency i.e. documentary evidence in support of cost of indigenous inputs.

The firm vide letter dated 29.07.2019 had requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted the comments of DPIIT wherein it is stated that the firm earlier informed that import items namely Oxygen Generator, Intelli Control & Oxygen monitor for Oxygen generator are fitted with indigenous items like filter, air receiver, buffer vessel, storage tank & interconnecting piping, valves & instruments etc. to make a functional oxygen plant and that the value of the indigenous item is Rs. 14,66,378. As the value of imported and indigenous inputs in export item is more than FoB value of exports and earlier the NC requested from the firm to submit documentary evidence in support of cost of indigenous inputs. In view of DPIIT comments, the Committee decided to again ask the party, how the FOB value of export comes out to be lesser than that of the total value of imported and indigenous items. Hence, the Committee decided to wait for the comments.

Case is deferred.

87| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 73

Case No.: 21/14/80-ALC2/2018

MANN AND HUMMEL FILTER PVT. LTD. Status: Deferred Lic. No. /date: 0710110190 Date: 29.07.2016 HQ. No.: 01/80/050/00337/AM19 norms Pending with DHI RLA No.: 07/24/040/00144/AM17 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 14/80-ALC2/2018 dated 20.02.2019 on the recommendation of representative of DHI.

            The firm vide letter dated 18.12.2019 had requested for re-fixation of ad-hoc norms. The Committee

reconsidered the case and noted that the firm’s representation was forward to DHI on 06.10.2020 for examination & comments. However, no comments have been received yet. Hence, the committee decided to wait for the comments.

Case is deferred.

Sl. No. 74

Case No.: 15/19/80-ALC2/2014

DOOSAN POWER SYSTEMS INDIA PRIVATE LIMITED Status: Deferred Lic. No. /date: 0410159541 Date: 08.10.2014 HQ. No.: 01/80/050/00449/AM15 norms Pending with DHI RLA No.: 04/24/040/00141/AM15 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 16/80-ALC2/2015 dated 10.11.2015 as per written of DHI vide their UO Note No. 3(157)/14-TSW(B) dated 13.11.2015.

            The firm vide letter dated 13.09.2019 had requested for re-fixation of ad-hoc norms. The Committee

reconsidered the case and noted that the firm’s representation was forward to DHI on 06.10.2020 for examination & comments. However, no comments have been received yet. Hence, the committee decided to wait for the comments.

Case is deferred.

Sl. No. 75

Case No.: 19/3/80-ALC2/2018

MVM SOLAR PVT. LTD. Status: Approved Lic. No. /date: 0710111072 Dated 03.02.2017 HQ. No.: 01/80/050/00019/AM19

RLA No.: 07/24/040/00349/AM17 No. 05/80 dated06.06.2019 due to non-submission of reply of deficiency letter raised by MSME.

            The firm vide letter dated 24.01.2020 had furnished the reply and requested for fixation of ad-hoc norms.

The Committee reconsidered the case and decided to fix the ad-hoc norms as per comments of MSME as under:

  1. Per unit weight of 360 t/inch, 250 t/inch & 280 t/inch SS cloth mesh is 0.043 Kg/Sqm, 0.11 Kg/Sqm and 0.15 kg/sqm respectively.
  2. Relevant import item at Sl. No. 1 may be allowed as applied inclusive of 43.50% wastage.
  3. Relevant import item at Sl. No. 2 may be allowed as 240 Sq. mtr inclusive of 42.80% wastage.
  4. Relevant import item at Sl. No. 3 may be allowed as 94.5 Sq. mtr inclusive of 42.80% wastage.
  5. Relevant import item at Sl. No. 4 may be allowed as 5497.7 Sq. mtr inclusive of 81.70% wastage.
  6. Relevant import item at Sl. No. 5 may be allowed as per GN-4.
  7. Relevant import item at Sl. No. 6 may be allowed @ upto 5% of fob value.
  8. Relevant import item at Sl. No. 7 may be allowed @ upto 5% of FoB value.

88| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Sl. No. 76

Case No.: 34/2/80-ALC2/2016

TPP BOILERS PVT. LTD Status: Deferred Lic. No. /date: 0310801039 Dated 15.12.2015 HQ. No.: 01/80/050/00037/AM17 Pending with DHI RLA No.: 03/95/040/00696/AM16 Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 02/80 dated 26.04.2016as per comments of DHI. The firm vide letter dated 29.07.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and noted that the firm’s representation was forward to DHI on 07.10.2020 for examination & comments. However, no comments have been received yet. Hence, the committee decided to wait for the comments.

Case is deferred.

Sl. No. 77

Case No.: 39/27/80-ALC2/2011

Bharat Heavy Electricals Limited Status: Rejected Lic. No. /date: 6110000728 Dated 27.12.2011 HQ. No.: 01/80/050/00572/AM12/

Subject: Request for re-fixation of ad-

hoc norms

RLA No.: 61/24/040/00055/AM12 Decision: The Committee considered the case as per the agenda and noted the following older decisions:

i) Meeting No. 27/80 dated20.03.2012: For 1 Unit, import items at Sl. No. 217 to 233 were deleted owing to their Capital Goods nature. ii) Meeting No. 14/80 dated 01.10.2013: Amended earlier decision and allowed all items except import items at Sl. No. 217-219 and 228-230. (Six items were not allowed in terms of Policy Circular No. 50 dated 28.12.2011.) iii) Meeting No. 05/80 dated 09.06.2015: Committee reconsidered the case and decided that since the deleted items are (BTGs) finished goods and not components/raw materials as claimed by firm, so could not be admissible as per Circular No. 50 dated 28.12.2011. iv) Meeting No. 14/80 dated 19.12.2017: On firm’s request, Committee reconsidered the case and referred the matter to Policy Relaxation Committee. v) PRC in their Meeting 17/AM19 dated 25.09.2018: Referred the issue to Policy Division 4 for examination and comments. vi.) The Policy Interpretation Committee in its meeting held on 09.06.2020 has decided that such supplies would be admissible as deemed export and also eligible for advance authorization. vii.) Policy-VI division vide their letter dated has stated that the cases of the firm were placed by NC-2 before the PIC in its meeting held on 16.07.2019 wherein a decision has been taken. PC-4/NC-1 may take similar action for a decision in this matter.

The firm has requested for re-fixation of ad-hoc norms for six import items at Sl. No. 217, 218, 219, 228, 229 & 230 and grant of deemed export benefits against the above six items. The Committee reconsidered the case and observed that the items in this case are different from that in the cases taken up in the PRC. Here the items are Turbine, Generator and Tools. The committee observed that Turbine and Generator are capital Goods fitted as it is and the tools are for assembly. Hence these items are not to be allowed. Therefore the case stands rejected.

Sl. No. 78

Case No.: 42/5/80-ALC2/2017

PLANSEE INDIA HIGH PERFORMANCE MATERIALS PVT. LTD. Status: Deferred Lic. No. /date: 0710108948 Dated 26.10.2015 HQ. No.: 01/80/050/00103/AM18 Pending with Firm RLA No.: 07/24/040/00192/AM16 No. 17/80 dated19.12.2017 on the ground that the firm wanted to import Sheets / Plates/ Rods/ Bars etc. and no co- correlation was established with import /export item. Sheets and plates cannot be machined, and no specific input

89| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

items have been claimed.

            The firm vide letter dated 24.08.2020 had furnished the reply and requested for fixation of ad-hoc norms.

The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/136/2020-TSW dated 12.10.2020:

  1. Specific name(s) of export items at Sl. No. 1, 2 & 3, as the existing names of the export items namely, machined parts of Tungsten, Molybdenum & Tantalum for Semiconductor Industry, is very generic.
  2. Specific name(s) of import items at Sl. No. 1, 2 & 3, as the existing description of import items, is very generic.
  3. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
  4. Weight of each Export Product.
  5. Weight of each of the imported and indigenous input, separately for each product, for the purpose of also be indicated.
  6. Starting from the specification of the export product, basic calculation as to how of raw material proposed
  7. Sale price of Tungsten, Molybdenum & Tantalum scrap generated during the manufacturing process, supported by documentary evidence like copies of sale invoices.

Case is deferred.

Sl. No. 79 GEA Process Engineering, Vadodara Status: Deferred HQ. No.: 01/80/162/AM09/ in respect of 26 export product

Decision: The firm has stated that they are a 100% Export Oriented Unit having letter of permission (LOP) No. KASEZ/100%EOU/II/08/09-10/11623 dated 23.11.2009 are the Member of EPC for EOUs and KSEZs. The firm has stated that the company is an EOU unit and it is registered with Kandla Special Economic Zone (KASEZ) and there is a requirement by KASEZ that EOU unit needs to fix the norms of its export product.

The firm vide their representation dated 11.01.2020 has requested for fixation of input/output Norms for the import/export products. The Committee considered the case and noted that a copy of application was sent to MSME on 08.09.2020 for examination of the case. However, the representative of MSME requested to send again the complete set of application to examine the case. Therefore, the Committee decided to send again the complete set of application to MSME for examination of the case.

Case is deferred.

Sl. No. 80

Case No.: 19/11/80-ALC2/2018

ICEM ENGINEERING COMPANY PRIVATE LIMITED Status: Deferred Lic. No. /date: 0310822939 Dated 09.08.2018 HQ. No.: 01/80/050/00210/AM19 Pending with Tech-3 RLA No.: 03/94/040/00306/AM19 No. 23/80 dated13.03.2020 due to non-submission of reply of deficiency letter raised by Consultant (Tech-3).

            The firm vide letter dated 19.08.2020 furnished the reply and requested for fixation of ad-hoc norms. The

Committee reconsidered the case and noted that the firm’s representation was forward to Consultant (Tech-3) on 16.10.2020 for examination & comments. However, no comments have been received yet. Hence, the committee decided to wait for the comments.

90| P a g e Minutes of NC-I of Meeting No. 07/80 scheduled for 22.10.2020 and held on 23.10.2020

Case is deferred.

Sl. No. 81

Case No.: 26/20/80-ALC2/2017

ICEM ENGINEERING COMPANY PRIVATE LIMITED Status: Deferred Lic. No. /date: 0310817800 Dated 15.12.2017

HQ. No.: 01/80/050/00390/AM18 Pending with Tech-3 RLA No.: 03/94/040/00742/AM18 No. 23/80 dated13.03.2020 due to non-submission of reply of deficiency letter raised by Consultant (Tech-3).

            The firm vide letter dated 19.08.2020 furnished the reply and requested for fixation of ad-hoc norms. The

Committee reconsidered the case and noted that the firm’s representation was forward to Consultant (Tech-3) on 16.10.2020 for examination & comments. However, no comments have been received yet. Hence, the committee decided to wait for the comments.

Case is deferred.

Sl. No. 82

Case No.: 1/16/80-ALC2/2015

GARDNER AEROSPACE PRANITA PRIVATE LIMITED Status: Deferred Lic. No. /date: 0710108718 Dated 11.09.2015

HQ. No.: 01/80/050/00286/AM16

RLA No.: 07/24/040/00176/AM16 No. 16/80-ALC2/2019 dated 04.12.2019 due to non-submission of reply of deficiency letter raised by MSME.

            The firm vide email dated 31.08.2020 furnished the reply and requested for fixation of ad-hoc norms. The

Committee reconsidered the case and decided to forward the firm’s representation to MSME for examination & comments.

Case is deferred.

Government ofindia Director General of Foreign Trade Case No 46 DGFT UO No 01ノ80/50/191/AM-20ノDES¨ 1/1618 dated 18 12.2019 Advance Authorization No 0310832178 dated ll 10 2019 M′s GODREJ BOYCE MFC CO LTD,Mumbal. The fo‖ owing Quantty ofitems ofimport may be a‖ owed against exporti Note: As per the statement furnished by the applicant, Proto Mini and Maxi Dyads has been manufactured by duty paid Steel Plates. (S K Bhatnager) TC(SKB) 23102020 Shri Pranav UpadhaYaY Asstt Director, NC-l :TCHS Code Export ltem Quantity lTCHS Code lmport ltem Quantity to be allowed 93059100 Mini Production Dyads:Length 7 7 Meter,Diameter 0 56 rneter NetヽVeight of Steel: 40,025 00 Kgs SttL PLtt CS AS3678 Gr 250: 3888000K9 SttL PLT CS AS3678Gr350: 91 00 Kgs STL PLT CS AS1548 P丁-460NR: 1926 Kgs 32 Nos 72089000 Carbon Steel Plate(CSP)AS 3678 Gr250 6% on net weight of CSP 453678 Gr 250 in the export of 32 Nos Mini Production Dyads. 72089000 Carbon Steel Plate AS 3678 Gr 350 52ok on net weight of CSP A53678 Gr 350 in the export of 32 Nos Mini Production Dyads. 72089000 Carbon Steel Plate AS 1548 Gr―PT 460N R 50%on net weight of CSP AS1548 Gr ―P丁460NR in the export of 32 Nos Mini Production Dyads 93059100 Maxi Production Dyads: Length 9 8 Meter, Diameter 1 4meter Net Weight of Steel: 273,524 00 Kgs STL PLT CS AS3678 Gr250: 2,48,39600K9 SttL PLtt CS AS1548 PT-460NR: 24,460 00 Kgs STL PLT CS AIloy BS80:668 Kgs 32 Nos 72089000 Carbon Steel Plate(CSP)AS 3678 Gr250 7oh on net weight of CSP 453678 Gr 250 in the export of 32 Nos Maxi Production Dyads. 72089000 Carbon Steel Plate AS 1548 Gr―PT 460NR 18%on net we19ht Of CSP AS1548 Gr ―PT 460NR in the export of 32 Nos Maxi Production Dvads 72089000 Carbon Piate AIloy80 ｔ ｅ ｅ‐ Ｂ ｉ Ｓ Ｓ 38% on net weight of CSP BIS Alloy 80. in the export of 32 Nos Maxi Production Dyads. D

「 ‖じ:■0.r<′ υ :∠′‐ :o′ ∠u∠U‐ :OW 15ι ―ノ57 η P働 g{r{il {T{Sr-{ ErFrqq 3if{rcaflrdTrilq rEdr4 rffirla 3lk Jrraftq. eq-cr fterra Government of lndia Ministry of Commerce & lndustry Department for Promotion of lndustry & lnternal Trade (Technicat Support Section) SutteCti― M/s Micron lnstrument P‖vate Limhed,(AA No.0510414517 dated 30 06.2020& A A No 0510414518 dated 30.062020) Reference:‐ DG.F.T F No.01ノ80/050/00498/AM21ノ ′ D.GF.丁 F.No.01/80/050/00499/AM21/ 肝 mゝ黒認|:「電!器|:r嘗営為 F牌7:こ翼‖計捐 :1:き鷲翼温∬T.還%iri澪: connectiOnithe undersigned is directed to say thatthe instant AAs rllay be ratified as underi Case:lA.A No.0510414517 dated 30.06.2020 1.Net weight of expOrtitem may be speciled as 205 Kgs. 2 Qua雨りσ mpm mm may∞訓 0‖ 1∫:胤驚 :み謙稲雲ォ9 contentin the expOrt product afterta Case:2A.A No 0510414518 dated 30.062020 1.Net welght of exportitem may be specified as 559.12 Kgs. 2.Quantity ofirnportitem may be a‖ owed as 1683 Kgs.as 3.01 Kgs/Kg,cOntent in the export product aftertaking 60/。 recovery from the scrap. Norms Committee may take a view. ´ TLIヽこ)tt. (SK.」ain) Development off:cer Tel.23063166 E― mall:sushilk.lain@nに。 in Q_卿 DP‖TU.O NO.P-47012/15/2020-TSW dated 12.102020

F‖e No.P-47011′63ノ2020"TSW , 刊 srr{irs{6Ft srBqq 3ih-:rcd+ dxaq :rd;qtrr sfifd 3it{ 3{iaf{-6dqrcR fdtrrrr Government of lndia Ministry of Commerce & lndustry Department for Promotion of lndustry & lnternal Trade (Technical Support Section )

Subject: - M/s Frizair Private limited(A.A. No.0910068919 dated 30.06.2020l,.

Reference: - DGFT F. No. 01/80/050/00501/AM21 DGFT(DES-1) may kindly refer to their e-mail dated 14th September 2020 forwarding firm's application for fixation of norms in respect of the above-mentioned A.A. ln this connection, the undersigned is directed to say that the instant A.A. may be ratified as under:

  1. Quantity of import item at Sl. No. 1 may be allowed as 1.01 Kgs. /Kg. content in the export products as per SION C-1175.
  2. Quantity of import item at Sl. No. 2 may be allowed as 1.01 Kgs. /Kg. content in the export products taking clue from SION C-1 175. a ５ 三 ヽ Ｉ ｌ ｌ 　 ィ （ ． 　 （ 辮
  3. Quantity of import item at Sl. No. 3 may be allowed as export products as per SION C-1175.
  4. Quantity of import item at Sl. No. 4 may be allowed DP‖TU.O NO.P-47011/63/2020‐ TSVV dated 23 09 2020 ノ多百瀞 |しぃ Development Officer Tcl.23063166 Emai卜sushilk.lain@nic in 1 02 Kgs /Kg.cOntent in the upto 0 5% of FOB value of export as per SION C-1175. 5, lmport item at Sl. No. 5 may be allowed on net to net basis with accountability clause. Norms Committee may take a view.

Fi:o No.P47011′ 390ノ2018‐TSW mイ ん ヘ 呵バυ .rF,q.HH*or-"= 3-€ilrr q-Ef{ *( ffifi dnqrr ftrrm Government of lndia Ministry of Commerce & lndustry Department for Promotion of lndustry & lnternal Trade (Technical Support Section )

Subject: - M/s Bharat Heavy Electrical Limited, A.A. No.04'10112044 dated 02.03.2010

Reference: - DGFT F.No.01/80/050/0081 g/AM1 0/DES-1 DGFT(DES-Z) may kindly refer to their E-mail dated 23rd July 2020 foruvarding firm's reply for amendment of norms. ln this connection, the undersigned is directed to say that for the purpose of redemption of A.A., the following modifications may be made in the ratified norms:

  1. lmport items at Sl.No.3, 6 to 14, 16,17 and22 may be deleted as nol imported by the firm.
  2. Quantity of import item at Sl.No.1 may be allowed as 684 Sets ( 14362 Kgs.)on net to net basis with accountabilrty clause.
  3. Quantity of import item at Sl.No.2 may be allowed as 94 Sets( 19552 Kgs") on net to net basis with accountability clause.
  4. Quantity of import item at Sl.No.4 may be allowed as 3 Sets ( 6840 Kgs.) on net to net basis with accountability clause.
  5. Quantity of import item at Sl No.5 may be allowed as 3 Sets( 4626 Kgs.) on net to net basis with accountability clause.
  6. Quantity of import item at Sl.No.l5 may be allowed as 1 Set (91 Kgs.) on nel to net basis with accountability clause.
  7. Quantity of import item at Sl.No.1B may be allowed as 1 Set (549 Kgs.) on net to net basis with accountability clause. B. Quantity of import item at Sl.No.19 may be allowed as 1 Set (1508 Kgs.) on net to net basis wilh accountability clause.
  8. Quantity of import item at Sl.No.20 may be allowed as 1 Set ( 523 Kgs.) on net to nel basis with accountability ctause. lO.Quantity of import item at Sl.No.2'1 may be allowed as 1 Set (51 Kgs.) on net to net basis with accountability clause. Earlier norms were recommended based on the information submitted by the firm at that time. Now the firm has stated that at that time project was in the initial stage and the . exact details were not available with them. Now they have given the details as per actuals. Norms Committee may take a view. DP‖ TUONO P-47011/390/2018-TSVV dated 02.092020 (S.K.」鼻 「 |°¬′レヒυ Development officer Tel.23063166 E― mai卜sushilkJaln@nic.in

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.

Citation copied