IN FORCE Norms Committee — Engineering (Gr B / NC-I) Advance Authorisation 2020-09-10

DGFT Committee Minutes

Document text

DIRECTORATE GENERAL OF FOREIGN TRADE

- (DES I SECTION)

MINUTES OF MEETING NO. 05/80 OF THE NORMS COMMITTEE-I DATED 10.09.2020 HELD ON

17.09.2020

Meeting No. 05/80 of the Norms Committee (NC-I) for the licensing year 2020-2021 (originally scheduled for 10.09.2020) held on 17.09.2020 under the Chairmanship of Sh. R.P. Goyal, Additional Director General of Foreign Trade to consider the applications under Duty Exemption/Remission Schemes (Chapter-4) of the applicable Foreign Trade Policy and the Handbook of Procedures. The following Members of the Committee were present in the meeting: -

==> picture [464 x 125] intentionally omitted <==

----- Start of picture text ----- Sl. No. Name of the representatives & their Designation Department 1. Shri K.S. Sodhi, Asst. Director MSME 2. Shri Sushil Kumar Jangid, Scientist ‘B’ MeitY 3. Shri Shaish Kumar, (Tech-1) Consultant 4. Shri V.C. Agarwal, (Tech-3) Consultant 5. Shri S. K. Bhatnagar, Consultant In Attendance 1. Dr. D. C. Dabhole, Dy. DGFT DGFT 2. Shri Pranav Upadhyay, Assistant Director ISS DGFT ----- End of picture text -----

Note:

In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The scanned copies uploaded are to be accepted. The U.O. No./O.M No of the scanned copy is reflected in the minutes.
Wherever the Committee has fixed norms, the RAs should allow inputs as per wastage norms approved or as applied whichever is less.
All applications/representations/reply to the Deficiency letters etc. may be sent to NC-I at e-mail addressnc1.dgft@nic.in. All firms are also requested to mail/send their present valid email addresses so that correspondences can be made through email/ by Post.
Minutes of Meeting 03/80 (originally scheduled for 30.07.2020) held on 06.08.2020 were circulated on 28.08.2020,to all the members of the Committee and the comments, there upon (wherever received), were incorporated in the Minutes and therefore the said minutes were uploaded on dgft.gov.in on 17.09.2020.
Minutes of Meeting 04/80 dated on 20.08.2020 were circulated on 01.09.2020, to all the members of the Committee and the comments, there upon (wherever received), were incorporated in the Minutes and therefore the said minutes were uploaded on dgft.gov.in on 17.09.2020.

1 | P a g e

MEETING NUMBER: 5/80-ALC2/2020 MEETING DATE: 10.09.2020

==> picture [476 x 66] intentionally omitted <==

----- Start of picture text ----- Case No.:29/5/80-ALC2/2020 Party Name: MINDA SILCA Meet No/Date:5/80- Status: ENGINEERING LTD. ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0510382039 :01/80/050/00579/AM21/ :05/24/040/00476/AM14/ 18.03.2014 ----- End of picture text -----

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms on repeat 1 basis as approved for AA No. 0510394373 dated 27.05.2015 as per written comments of MSME as under:

Sl. No.	ITCHS<br>Code	Import Item	Recommended Norms
1	72119090	Steel Strips (11SMNPB30)	65.20% wastage allowed after affecting<br>1/3rdrecoveryfrom scrap

RA concerned may take further necessary action as per the decision of NC.

Case No.:366/15/80-ALC2/2018	Party Name: FOWLER	Meet No/Date:5/80-	Status:
	WESTRUP (INDIA) PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00708/AM19/	RLA File<br>:07/24/040/00106/AM16/	Lic.No/Date:0710108605<br>13.08.2015	Pending<br>with Firm

2 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 26.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:30/1/80-ALC2/2019	Party Name: FOWLER	Meet No/Date:5/80-	Status:
	WESTRUP (INDIA) PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00778/AM19/	RLA File<br>:07/24/040/00109/AM16/	Lic.No/Date:0710108606<br>13.08.2015	Pending<br>with Firm

3 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 26.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:363/15/80-ALC2/2018	Party Name: PROMAC	Meet No/Date:5/80-	Status:
	ENGINEERING INDUSTRIES	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00705/AM19/	RLA File<br>:07/24/040/00184/AM16/	Lic.No/Date:0710108812<br>05.10.2015	Pending<br>with Firm

4 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 21.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

2 | P a g e

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:364/15/80-ALC2/2018 Party Name: PROMAC Meet No/Date:5/80- Status: ENGINEERING INDUSTRIES ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0710108813 Pending :01/80/050/00706/AM19/ :07/24/040/00185/AM16/ 05.10.2015 with Firm 5 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 21.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

Case No.:27/5/80-ALC2/2020	Party Name: SCIGENICS	Meet No/Date:5/80-	Status:
	(INDIA) PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00577/AM21/	RLA File<br>:04/21/040/00165/AM17/	Lic.No/Date:0410162152<br>01.08.2016	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:215/15/80-ALC2/2018	Party Name: FOWLER	Meet No/Date:5/80-	Status:
	WESTRUP (INDIA) PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00557/AM19/	RLA File<br>:07/24/040/00201/AM17/	Lic.No/Date:0710110568<br>25.10.2016	Pending<br>with Firm

7 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 26.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:222/15/80-ALC2/2018	Party Name: FOWLER	Meet No/Date:5/80-	Status:
	WESTRUP (INDIA) PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00564/AM19/	RLA File<br>:07/24/040/00204/AM17/	Lic.No/Date:0710110569<br>25.10.2016	Pending<br>with Firm

8 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 26.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

3 | P a g e

Case No.:380/15/80-ALC2/2018	Party Name: FOWLER	Meet No/Date:5/80-	Status:
	WESTRUP (INDIA) PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00722/AM19/	RLA File<br>:07/24/040/00302/AM17/	Lic.No/Date:0710110914<br>05.01.2017	Pending<br>with Firm

9 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 26.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 212] intentionally omitted <==

----- Start of picture text ----- Case No.:402/15/80- Party Name: SHIV Meet No/Date:5/80- Status: ALC2/2018 HYDROMET ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:2410042158 :01/80/050/00744/AM19/ :24/24/040/00034/AM17/ 14.03.2017 Decision: The Committee considered the case as per the agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under: 10 ITCHS Export Item Quantity ITCHS Import Item Recommended Code Code Norms 81101000 Antimony 45385 26171000 Antimony Concentrate 101138 Kgs Metal Kgs (Antimony Content 47% - 55%) (Weight basis) Note: 1. The weight of export item should be 45385 Kgs. 2. The import item should contain Antimony as 45999.57Kgs. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:126/15/80-ALC2/2018 Party Name: SHAKTI PUMPS Meet No/Date:5/80- Status: (INDIA) LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:5610005299 Pending :01/80/050/00468/AM19/ :56/24/040/00036/AM18/ 08.01.2018 with Firm 11 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 06.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

Case No.:10/1/80-ALC2/2019	Party Name: MAGNA	Meet No/Date:5/80-	Status:
	AUTOMOTIVE INDIA	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00758/AM19/	RLA File<br>:04/24/040/00001/AM19/	Lic.No/Date:0410164172<br>06.04.2018	Pending<br>with Firm

12 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 12.03.2020 followed by a reminder on 22.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

4 | P a g e

Case No.:397/15/80-ALC2/2018	Party Name: PROMAC	Meet No/Date:5/80-	Status:
	ENGINEERING INDUSTRIES	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00739/AM19/	RLA File<br>:07/24/040/00357/AM18/	Lic.No/Date:0710113276<br>14.05.2018	Pending<br>with Firm

13 Decision: The Committee considered the case as per the agenda and noted that due to insufficient reply, another deficiency letter seeking certain information as raised by DHI was sent to the firm on 21.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:28/5/80-ALC2/2020 Party Name: PENGUIN Meet No/Date:5/80- Status: PETROLEUM SERVICES ALC2/2020 Deferred PVT.LTD. 10.09.2020 HQ File RLA File Lic.No/Date:0310821057 Pending :01/80/050/00578/AM21/ :03/92/040/00044/AM19/ 17.05.2018 with DPIIT 14 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:31/5/80-ALC2/2020	Party Name: THE TATA	Meet No/Date:5/80-	Status:
	POWER COMPANY LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00581/AM21/	RLA File<br>:07/24/040/00049/AM19/	Lic.No/Date:0710113372<br>31.05.2018	Pending<br>with MeitY

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MeitY on 15.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [476 x 165] intentionally omitted <==

----- Start of picture text ----- Case No.:133/15/80-ALC2/2018 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910066357 Pending :01/80/050/00475/AM19/ :09/24/040/00058/AM19/ 20.06.2018 with Firm Decision: The Committee considered the case as per the agenda and noted that DHI informed that the firm’s 16 reply dated 15.06.2020 is deficient as the firm has only given statement of wastage. Therefore, the Committee decided to ask again from the firm to furnish following information as per comments of DHI : 1. To provide calculation of requirement supported by Engineering Drawing with relevant dimensions highlighted. Case is deferred. ----- End of picture text -----

5 | P a g e

==> picture [476 x 165] intentionally omitted <==

----- Start of picture text ----- Case No.:165/15/80-ALC2/2018 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910066427 Pending :01/80/050/00507/AM19/ :09/24/040/00139/AM19/ 06.07.2018 with Firm Decision: The Committee considered the case as per the agenda and noted that DHI informed that the firm’s 17 reply dated 15.06.2020 is deficient as the firm has only given statement of wastage. Therefore, the Committee decided to ask again from the firm to furnish following information as per comments of DHI : 1. To provide calculation of requirement supported by Engineering Drawing with relevant dimensions highlighted. Case is deferred. ----- End of picture text -----

Case No.:166/15/80-ALC2/2018	Party Name: BHARAT HEAVY	Meet No/Date:5/80-	Status:
	ELECTRICALS LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00508/AM19/	RLA File<br>:09/24/040/00171/AM19/	Lic.No/Date:0910066472<br>18.07.2018	Pending<br>with Firm

18 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:179/15/80-ALC2/2018	Party Name: PROMAC	Meet No/Date:5/80-	Status:
	ENGINEERING INDUSTRIES	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00521/AM19/	RLA File<br>:07/24/040/00102/AM19/	Lic.No/Date:0710113710<br>13.08.2018	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 14.09.2020. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the firm.

Case is deferred.

Case No.:23/11/80-ALC2/2018	Party Name: JAYESH METALS	Meet No/Date:5/80-	Status:
	AND FERRO ALLOYS LLP	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00214/AM19/	RLA File<br>:03/94/040/00488/AM19/	Lic.No/Date:0310823416<br>29.08.2018	Pending<br>with Firm

20 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

6 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:28/11/80- Party Name: L & T-MHPS TURBINE Meet No/Date:5/80- Status: ALC2/2018 GENERATORS PRIVATE LIMITED ALC2/2020 & 10.09.2020 Deferred HQ File RLA File :03/95/040/00466/AM19/ Lic.No/Date:0310823400 Pending with :01/80/050/00219/AM19/ 29.08.2018 Firm 21 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish following information as per comments of DHI : 1. To submit revised weight balance after deletion of item at Sl. No. 8 to 11. Case is deferred. ----- End of picture text -----

Case No.:9/1/80-		Party Name: L & T-MHPS TURBINE		Meet No/Date:5/80-		Status:
ALC2/2019		GENERATORS PRIVATE LIMITED		ALC2/2020 & 10.09.2020		Deferred
HQ File<br>:01/80/050/00757/AM19/		RLA File :03/95/040/00469/AM19/		Lic.No/Date:0310823645<br>07.09.2018		Pending with<br>DHI

22 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI for examination of the case on 19.06.2020 followed by a reminder on 07.09.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:30/5/80-ALC2/2020	Party Name: PENGUIN	Meet No/Date:5/80-	Status:
	PETROLEUM SERVICES	ALC2/2020	Deferred
	PVT.LTD.	10.09.2020
HQ File<br>:01/80/050/00580/AM21/	RLA File<br>:03/92/040/00172/AM19/	Lic.No/Date:0310823657<br>10.09.2018	Pending<br>with DPIIT

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

	Case No.:201/15/80-ALC2/2018		Party Name: DYNAMATIC		Meet No/Date:5/80-		Status:
			TECHNOLOGIES LIMITED		ALC2/2020 & 10.09.2020		Approved
	HQ File<br>:01/80/050/00543/AM19/		RLA File<br>:07/24/040/00155/AM19/		Lic.No/Date:0710113852<br>17.09.2018

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME . (Copy enclosed)

==> picture [476 x 107] intentionally omitted <==

----- Start of picture text ----- Case No.:82/11/80-ALC2/2018 Party Name: ANSTECH Meet No/Date:5/80- Status: ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410044543 :01/80/050/00273/AM19/ :34/24/040/00218/AM19/ 04.10.2018 25 Decision: The Committee considered the case as per the agenda and noted that the copy of application is being sent to the concerned technical authority. Case is deferred ----- End of picture text -----

7 | P a g e

Case No.:253/15/80-ALC2/2018	Party Name: BHARAT	Meet No/Date:5/80-ALC2/2020	Status:
	HEAVY ELECTRICALS	10.09.2020	Deferred
	LIMITED
HQ File<br>:01/80/050/00595/AM19/	RLA File<br>:09/24/040/00340/AM19/	Lic.No/Date:0910066870<br>16.11.2018	Pending with<br>DHI/RA

26 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 21.08.2020 for examination of the case. It was also noted that information regarding clubbing of AAs (AA No. 0910066870 and 0910065863) is still awaited from RA, Hyderabad. Therefore, the Committee decided to remind RA, Hyderabad & DHI for expediting the comments.

Case is deferred.

==> picture [476 x 120] intentionally omitted <==

----- Start of picture text ----- Case No.:259/15/80-ALC2/2018 Party Name: DYNAMATIC Meet No/Date:5/80- Status: TECHNOLOGIES LIMITED ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0710114156 27 :01/80/050/00601/AM19/ :07/24/040/00182/AM19/ 22.11.2018 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME . (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:270/15/80-ALC2/2018	Party Name: VEM	Meet No/Date:5/80-	Status:
	TECHNOLOGIES PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00612/AM19/	RLA File<br>:09/24/040/00428/AM19/	Lic.No/Date:0910066924<br>29.11.2018	Pending<br>with Firm

28 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:42/1/80-ALC2/2019	Party Name: LARSEN &	Meet No/Date:5/80-	Status:
	TOUBRO LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00790/AM19/	RLA File<br>:03/95/040/01295/AM19/	Lic.No/Date:0310827622<br>12.03.2019	Pending<br>with Firm

29 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (TEC-3) was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

8 | P a g e

==> picture [476 x 155] intentionally omitted <==

----- Start of picture text ----- Case No.:5/2/80-ALC2/2019 Party Name: VIPRA CLOSURES Meet No/Date:5/80- Status: PRIVATE LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0310828134 Pending :01/80/050/00005/AM20/ :03/95/040/01384/AM19/ 03.04.2019 with Firm 30 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of MSME: 1. To provide details for 14247 Kgs of import and corresponding 9706 Kgs of export while the license is for 200 MT import corresponding to 160 MT export. Case is deferred. ----- End of picture text -----

==> picture [476 x 363] intentionally omitted <==

----- Start of picture text ----- Case No.:3/3/80-ALC2/2019 Party Name: MUDHRA FINE Meet No/Date:5/80- Status: BLANC PRIVATE LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0410165451 :01/80/050/00009/AM20/ :04/24/040/00294/AM19/ 11.04.2019 Decision: The Committee considered the case as per the agenda and noted that DHI in its comments stated that the firm had not submitted calculation of requirementof raw material supported by dimensional drawing and only submitted statement of wastages. On the basis of written comments of DHI, the Committee decided to ratify the ad-hoc norms as under: Sl. ITCHS ITCHS Recommended No. Export Item Quantity Import Item Code Code Norms CAM-0000-1280 GEAR 22858 1 87089900 WHEEL LOCK LIFT LH 31 Number ITLA BONAITI 1.05 Kgs/Kg CAM-0000-1527 GEAR 72269230 25CRMO4KE content in the 22858 2 87089900 WHEEL LOCK LIFT RH 147X5 COIL export product Number CAM-0000-1452 20742 3 87089900 MANUAL LOCK CAM Number CAM-0000-1339 POWER 4 87089900 LOCK CAM LH 36299 ITLA BONAITI 1.05 Kgs/Kg Number 72269220 25CRM04KE content in the 105X4 COIL export product CAM-0000-1488 POWER 36299 5 87089900 LOCK CAM RH Number Note: Type & grade of tubing will be same as used in export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:4/3/80-ALC2/2019 Party Name: VEELINE MEDIA Meet No/Date:5/80- Status: LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0210209114 Pending :01/80/050/00010/AM20/ :02/24/040/00003/AM20/ 16.04.2019 with Firm 32 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 30.08.2020. However, no reply has been received yet. Hence, the Committee decided to wait for reply of the firm. Case is deferred. ----- End of picture text -----

9 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:8/3/80-ALC2/2019 Party Name: L & T-MHPS Meet No/Date:5/80- Status: TURBINE GENERATORS ALC2/2020 Deferred PRIVATE LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0310828481 Pending :01/80/050/00014/AM20/ :03/95/040/01354/AM19/ 23.04.2019 with DHI 33 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 03.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [476 x 118] intentionally omitted <==

----- Start of picture text ----- Case No.:26/5/80-ALC2/2020 Party Name: WHEELS INDIA Meet No/Date:5/80- Status: LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0410165481 34 :01/80/050/00576/AM21/ :04/24/040/00278/AM19/ 23.04.2019 Decision: The Committee considered the case as per the agenda and decided to refer the case to Consultant (Tech-3) for examination & comments. Case is deferred. ----- End of picture text -----

Case No.:1/5/80-ALC2/2019	Party Name: PAHARPUR	Meet No/Date:5/80-	Status:
	COOLING TOWERS LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00039/AM20/	RLA File<br>:02/24/040/00012/AM20/	Lic.No/Date:0210209171<br>16.05.2019	Pending<br>with Firm

35 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 06.03.2020 followed by a reminder on 27.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 164] intentionally omitted <==

----- Start of picture text ----- Case No.:13/5/80-ALC2/2019 Party Name: HEURTEY Meet No/Date:5/80- Status: PETROCHEM INDIA PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:3410045150 Pending :01/80/050/00051/AM20/ :34/24/040/00059/AM20/ 17.05.2019 with Firm Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI 36 on 22.07.2020 for examination of the case. However, DHI vide email dated 26.08.2020 informed that the firm has not furnished the calculation sheet of each operation to ascertain the actual wastage. Therefore, the Committee decided to ask again from the firm to furnish the following information as per comments of DHI: 1. To provide calculation sheet of each operation. Case is deferred. ----- End of picture text -----

10 | P a g e

Case No.:1/7/80-ALC2/2019	Party Name: CROWN	Meet No/Date:5/80-	Status:
	CLOSURES PVT. LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00098/AM20/	RLA File<br>:03/94/040/00246/AM20/	Lic.No/Date:0310829905<br>25.06.2019	Pending<br>with Firm

37 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on 06.03.2020 followed by a reminder on 23.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:2/7/80-ALC2/2019 Party Name: OSWAL PUMPS Meet No/Date:5/80- Status: LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3310030557 Pending :01/80/050/00099/AM20/ :33/24/040/00012/AM20/ 25.06.2019 with Firm 38 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 06.03.2020 followed by a reminder on 23.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

==> picture [476 x 144] intentionally omitted <==

----- Start of picture text ----- Case No.:3/7/80-ALC2/2019 Party Name: OAM SAAI Meet No/Date:5/80- Status: INTERNATIONAL INC. ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0510411061 :01/80/050/00100/AM20/ :05/24/040/00181/AM20/ 26.06.2019 39 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 1. Quantity of import items may be allowed as per GN-4. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:4/7/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910067697 Pending :01/80/050/00101/AM20/ :09/24/040/00138/AM20/ 26.06.2019 with DHI 40 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI for examination of the case on 05.06.2020 followed by a reminder on 07.09.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

11 | P a g e

==> picture [476 x 288] intentionally omitted <==

----- Start of picture text ----- Case No.:10/7/80-ALC2/2019 Party Name: P. M. ELECTRO Meet No/Date:5/80- Status: AUTO PVT. LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3110067458 Pending :01/80/050/00107/AM20/ :31/83/040/00048/AM20/ 28.06.2019 with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 41 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

Case No.:12/7/80-ALC2/2019	Party Name: AUTOCOMP	Meet No/Date:5/80-	Status:
	CORPORATION PANSE	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00109/AM20/	RLA File<br>:31/83/040/00050/AM20/	Lic.No/Date:3110067460<br>01.07.2019	Pending<br>with Firm

42 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 20.05.2020 followed by a reminder on 23.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:15/7/80-ALC2/2019	Party Name: DOOWON	Meet No/Date:5/80-	Status:
	CLIMATE CONTROL INDIA	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00112/AM20/	RLA File<br>:66/24/040/00003/AM20/	Lic.No/Date:6610000035<br>03.07.2019	Pending<br>with Firm

43 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

12 | P a g e

Case No.:3/9/80-ALC2/2019	Party Name: DYNA FORCE	Meet No/Date:5/80-	Status:
	HYDRAULICS PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00128/AM20/	RLA File<br>:31/83/040/00067/AM20/	Lic.No/Date:3110067484<br>25.07.2019	Pending<br>with Firm

44 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:45/11/80-ALC2/2004	Party Name: L&T- MHPS	Meet No/Date:5/80-	Status:
	TURBINE GENERATORS	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00171/AM20/	RLA File<br>:03/95/040/00574/AM20/	Lic.No/Date:0310831568<br>16.09.2019	Pending<br>with DHI

Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI for examination of the case on 19.06.2020 followed by a reminder on 07.09.2020. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:46/11/80-ALC2/2004	Party Name: L&T-MHPS	Meet No/Date:5/80-	Status:
	BOILERS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00172/AM20/	RLA File<br>:03/95/040/00588/AM20/	Lic.No/Date:0310831569<br>16.09.2019	Pending<br>with Firm

46 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:1/13/80-ALC2/2019	Party Name: RONCH	Meet No/Date:5/80-	Status:
	POLYMERS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00186/AM20/	RLA File<br>:03/95/040/00654/AM20/	Lic.No/Date:0310832012<br>04.10.2019	Pending with<br>Tech-1

47 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to Consultant (Tech-1) on 04.09.2020 for examination of the case. However, Consultant (Tech 1) informed that the reply which firm had submitted for their AA0310833381 dated 12.12.2019 is insufficient. Hence, the Committee decided to inform the firm to submit their reply in the matter at the earliest.

Case is deferred.

13 | P a g e

Case No.:2/13/80-		Party Name: FERRUM EXTREME		Meet No/Date:5/80-		Status:
ALC2/2019		ENGINEERING PRIVATE LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00187/AM20/		RLA File :05/23/040/00265/AM20/		Lic.No/Date:0510412040<br>07.10.2019

48 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not been received . However, the Committee was informed that some applications have been received which are yet to be linked. Hence, the Committee asked the section to check up.

Case is deferred.

Case No.:4/13/80-		Party Name: L&T- MHPS TURBINE		Meet No/Date:5/80-		Status:
ALC2/2019		GENERATORS PRIVATE LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00189/AM20/		RLA File :03/95/040/00681/AM20/		Lic.No/Date:0310832116<br>10.10.2019		Pending with<br>DHI

49 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI for examination of the case on 20.05.2020. However, no comments have been received yet. Hence, the Committee decided to remind DHI , to expedite the case.

Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:5/13/80- Party Name: L&T- MHPS TURBINE Meet No/Date:5/80- Status: ALC2/2019 GENERATORS PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :03/95/040/00655/AM20/ Lic.No/Date:0310832159 Pending with :01/80/050/00190/AM20/ 11.10.2019 Firm 50 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 11.02.2020 followed by a reminder on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:6/13/80-ALC2/2019 Party Name: GODREJ & Meet No/Date:5/80- Status: BOYCE MFG. CO. LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0310832178 Pending :01/80/050/00191/AM20/ :03/94/040/00505/AM20/ 11.10.2019 with Firm 51 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

Case No.:7/13/80-ALC2/2019		Party Name: ISGEC HITACHI		Meet No/Date:5/80-		Status:
		ZOSEN LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00192/AM20/		RLA File<br>:05/23/040/00269/AM20/		Lic.No/Date:0510412096<br>11.10.2019		Pending<br>with Firm

52 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

14 | P a g e

Case No.:8/13/80-ALC2/2019	Party Name: AZAD	Meet No/Date:5/80-	Status:
	ENGINEERING PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00193/AM20/	RLA File<br>:09/24/040/00347/AM20/	Lic.No/Date:0910068080<br>14.10.2019	Pending<br>with Firm

53 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 169] intentionally omitted <==

----- Start of picture text ----- Case No.:1/17/80-ALC2/2019 Party Name: VICTORA AUTO Meet No/Date:5/80- Status: PVT. LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510412724 Pending :01/80/050/00233/AM20/ :05/24/040/00513/AM20/ 29.11.2019 with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the 54 following information as per comments of MSME: 1. To provide corresponding blank size for each export item. 2. To explain the anomaly why as per AA the net export weight for export item Sl. No. 7 is 21491 Kgs and as per point 16A of ANF 4A at Sl. No. 7 requires 15000 Kgs of import product. Case is deferred. ----- End of picture text -----

Case No.:2/17/80-ALC2/2019	Party Name: SULZER PUMPS	Meet No/Date:5/80-	Status:
	INDIA LIMITED	ALC2/2020	Rejected
		10.09.2020
HQ File<br>:01/80/050/00234/AM20/	RLA File<br>:03/95/040/00827/AM20/	Lic.No/Date:0310833126<br>02.12.2019

55 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm & RA, Mumbai and in this regard a letter was sent to the firm & RA, Mumbai on 15.01.2020 followed by reminders on 09.03.2020 & 24.07.2020. However, no information has been received so far. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

Case No.:3/17/80-ALC2/2019	Party Name: SULZER PUMPS	Meet No/Date:5/80-	Status:
	INDIA LIMITED	ALC2/2020	Rejected
		10.09.2020
HQ File<br>:01/80/050/00235/AM20/	RLA File<br>:03/95/040/00828/AM20/	Lic.No/Date:0310833143<br>02.12.2019

56 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm & RA, Mumbai and in this regard a letter was sent to the firm & RA, Mumbai on 15.01.2020 followed by reminders on 09.03.2020 & 24.07.2020. However, no information has been received so far. Therefore, the Committee decided to reject the case under intimation to RA, Mumbai.

15 | P a g e

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:5/17/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2019 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00439/AM20/ Lic.No/Date:0910068244 Pending with :01/80/050/00237/AM20/ 02.12.2019 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 57 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 186] intentionally omitted <==

----- Start of picture text ----- Case No.:9/17/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3410045677 :01/80/050/00241/AM20/ :34/24/040/00270/AM20/ 03.12.2019 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 58 1. Quantity of relevant import items at Sl. No. 1, 2, 5 to 8 & 11 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 4 & 9 may be allowed as 1.05 Kgs/Kg content in the export product. 3. Quantity of relevant import item at Sl. No. 10 may be allowed as 1.01 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 199] intentionally omitted <==

----- Start of picture text ----- Case No.:10/17/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3410045679 :01/80/050/00242/AM20/ :34/24/040/00271/AM20/ 03.12.2019 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 59 1. Quantity of relevant import items at Sl. No. 1 to 13 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 14 may be allowed net to net basis. 3. Quantity of relevant import item at Sl. No. 15 may be allowed as 1.01 Kgs/Kg content in the export product. 4. Quantity of relevant import items at Sl. No. 16 to 19 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

16 | P a g e

==> picture [476 x 256] intentionally omitted <==

----- Start of picture text ----- Case No.:11/17/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2019 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00437/AM20/ Lic.No/Date:0910068247 Pending with :01/80/050/00243/AM20/ 04.12.2019 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 60 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:12/17/80- Party Name: DOOWON CLIMATE Meet No/Date:5/80- Status: ALC2/2019 CONTROL INDIA PVT LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File :26/24/040/00012/AM20/ Lic.No/Date:2610012887 Pending with :01/80/050/00244/AM20/ 04.12.2019 Firm 61 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:13/17/80- Party Name: KABY PRECISION Meet No/Date:5/80- Status: ALC2/2019 MACHINING PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00447/AM20/ Lic.No/Date:0910068268 Pending with :01/80/050/00245/AM20/ 06.12.2019 Firm 62 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 27.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

==> picture [476 x 107] intentionally omitted <==

----- Start of picture text ----- Case No.:6/18/85- Party Name: AUTOCOMP Meet No/Date:5/80- Status: ALC3/2019 CORPORATION PANSE PVT LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File :31/83/040/00120/AM20/ Lic.No/Date:3110067623 :01/85/050/00132/AM20/ 10.12.2019 63 Decision: The Committee considered the case as per the agenda and decided to refer the case to Consultant (Tech-3) for examination & comments. Case is deferred. ----- End of picture text -----

17 | P a g e

==> picture [476 x 365] intentionally omitted <==

----- Start of picture text ----- Case No.:1/19/80- Party Name: BAUMER Meet No/Date:5/80- Status: ALC2/2019 TECHNOLOGIES INDIA ALC2/2020 Approved PRIVATE LIMITED 10.09.2020 HQ File RLA File :52/24/040/00051/AM20/ Lic.No/Date:5210043275 :01/80/050/00266/AM20/ 23.12.2019 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-3) as under: Sl. ITCHS Quantity Sl. ITCHS Recommended No. Code Export Item No. Code Import Item Norms 22MM SOCKET 1 90330000 1430 Kgs RAC 1/2 14NPT IX 1.4404 18872 Kgs 22MM SOCKET 2 90330000 RAC G1/2 1.4404 6600 Kgs BRIGHT (including 25% 22MM SOCKET 1 72222021 SQUARE BAR wastage) after 3 90330000 6000 Kgs 22MM affecting 20% RAC 1/2 14NPT 1.4404 64 H11 SS 316L recovery from scrap 22MM Socket 4 90330000 RAC 1/2 14NPT INOX 1068 Kgs 1.4404 316L 14MM SOCKET 5 90330000 RAC D G1/4 1.4404 470 Kgs 2268 Kgs 14MM SOCKET 323.400 BRIGHT (including 40% 6 90330000 RAC D 1/4 18NPT 1.4404 Kgs 2 72222021 SQUARE BAR wastage) after 14MM SOCKET 14MM affecting 20% 7 90330000 RAC F/G SOUDE G1/4 558 Kgs H11 SS 316L recovery from 1.4404 scrap 14MM SOCKET 268.800 8 90330000 RAC F/G SOUDE 1/4 NPT 1.4404 Kgs Note: Grade of imported steel will be same as used in export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:2/19/80- Party Name: DILIGENT SCM Meet No/Date:5/80- Status: ALC2/2019 SOLUTIONS PR IVATE LIMITED ALC2/2020&10.09.2020 Rejected HQ File RLA File :09/24/040/00474/AM20/ Lic.No/Date:0910068302 :01/80/050/00267/AM20/ 24.12.2019 65 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm & RA, Hyderabad and in this regard a letter was sent to the firm &RA, Hyderabad on 14.02.2020 followed by reminders on 26.05.2020 & 24.07.2020. However, no information has been received so far. Therefore, the Committee decided to reject the case under intimation to RA, Hyderabad. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:4/19/80-ALC2/2019 Party Name: CRYOGAS Meet No/Date:5/80- Status: EQUIPMENT PVT LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410045738 Pending :01/80/050/00269/AM20/ :34/24/040/00287/AM20/ 24.12.2019 with Firm 66 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days. Case is deferred. ----- End of picture text -----

18 | P a g e

Case No.:9/19/80-ALC2/2019	Party Name: BONATRANS	Meet No/Date:5/80-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00274/AM20/	RLA File<br>:03/94/040/00785/AM20/	Lic.No/Date:0310833747<br>27.12.2019	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:8/19/80-ALC2/2019 Party Name: TEGA Meet No/Date:5/80- Status: INDUSTRIES LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0210209647 Pending :01/80/050/00273/AM20/ :02/24/040/00148/AM20/ 30.12.2019 with Firm 68 Decision: The Committee considered the case as per the agenda and decided to call the firm for personal hearing on the advice of Consultant (SKB), in the forthcoming NC meeting, since the justification submitted by applicant does not qualify for increasing the wastage.. Case is deferred. ----- End of picture text -----

Case No.:10/19/80-ALC2/2019	Party Name: BANGALORE	Meet No/Date:5/80-	Status:
	BIOTECH LABS PVT LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00275/AM20/	RLA File<br>:07/24/040/00223/AM20/	Lic.No/Date:0710115950<br>30.12.2019	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 26.06.2020 followed by a reminder on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send final reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

==> picture [476 x 210] intentionally omitted <==

----- Start of picture text ----- Case No.:11/19/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068312 Pending :01/80/050/00276/AM20/ :09/24/040/00489/AM20/ 31.12.2019 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 70 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? ----- End of picture text -----

19 | P a g e

Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.
A video film on complete operations (Cutting, forging and machining) for manufacturing of export item.

Case is deferred.

Case No.:12/19/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068313 Pending :01/80/050/00277/AM20/ :09/24/040/00490/AM20/ 31.12.2019 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

What is the exact name of the export product?
Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof.

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
What is the Rockwell Hardness Number of the final product and forged blank?
Detail of any heat treatment, if required.
What is the weight of final export item?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:13/19/80-ALC2/2019 Party Name: AUTOCOMP Meet No/Date:5/80- Status: CORPORATION PANSE ALC2/2020 Deferred PRIVATE LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:3110067645 Pending :01/80/050/00278/AM20/ :31/83/040/00128/AM20/ 31.12.2019 with Firm

Decision: The Committee considered the case as per the agenda and Consultant (Tech-3) informed that the firm 72 vide letter dated 26.12.2019 has informed that they have revised items of import. Therefore, the Committee decided to ask from the firm to furnish the following information as per comments of Consultant (Tech-3):

To submit a copy of amended AA.
Details of wastage claimed.
Drawing & calculations may be correlated with export & import list.

Case is deferred.

==> picture [476 x 107] intentionally omitted <==

----- Start of picture text ----- Case No.:14/19/80-ALC2/2019 Party Name: ISGEC HEAVY Meet No/Date:5/80- Status: ENGINEERING LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510413163 Pending 73 :01/80/050/00279/AM20/ :05/23/040/00381/AM20/ 01.01.2020 with Firm Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite ----- End of picture text -----

20 | P a g e

information within 15 days.

Case is deferred.

Case No.:15/19/80-ALC2/2019 Party Name: SOGEFI ENGINE Meet No/Date:5/80- Status: SYSTEMS INDIA PRIVATE ALC2/2020 Rejected LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0710115971 :01/80/050/00280/AM20/ :07/24/040/00097/AM20/ 02.01.2020

74 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm & RA, Bangalore and in this regard a letter was sent to the firm &RA, Bangalore on 13.02.2020 followed by reminders on 26.05.2020 & 24.07.2020. However, no information has been received so far. Therefore, the Committee decided to reject the under intimation to RA, Bangalore.

Case No.:17/19/80-ALC2/2019 Party Name: ISGEC HEAVY Meet No/Date:5/80- Status: ENGINEERING LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510413181 Pending :01/80/050/00282/AM20/ :05/23/040/00378/AM20/ 02.01.2020 with Firm

75 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (SKB) was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:1/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068392 Pending :01/80/050/00295/AM20/ :09/24/040/00522/AM20/ 21.01.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

Provide complete neat coloured drawing of the product with Top, Side and Front view and dimensions thereof.

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

21 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:2/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068393 Pending :01/80/050/00296/AM20/ :09/24/040/00523/AM20/ 21.01.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 77 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:3/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068394 Pending :01/80/050/00297/AM20/ :09/24/040/00524/AM20/ 21.01.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

22 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:4/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068395 Pending :01/80/050/00298/AM20/ :09/24/040/00528/AM20/ 21.01.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 79 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 228] intentionally omitted <==

----- Start of picture text ----- Case No.:5/21/80-ALC2/2019 Party Name: MAHINDRA Meet No/Date:5/80- Status: DEFENCE SYSTEMS LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0510413404 :01/80/050/00299/AM20/ :05/24/040/00602/AM20/ 21.01.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 80 ITCHS Sl. ITCHS Recommended Export Item Quantity Import Item Code No. Code Norms APC, LHD, With Base Crane assy (Net 1 84269100 Ballistic Stanag-2, to Net) Net to net basis Blast Protection of Extension Arm assy 2 84269100 with nil wastage 87100000 stanag-4, Diesel, 5 Number (Net to Net) and 6X6 base vehicle with winch 3 90079140 Camera & Illuminator accountability Kit (Net to Net) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:7/21/80-ALC2/2019	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00301/AM20/	RLA File<br>:34/24/040/00329/AM20/	Lic.No/Date:3410045799<br>21.01.2020	Pending<br>with Firm

81 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

23 | P a g e

Case No.:8/21/80-ALC2/2019	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020
		10.09.2020
HQ File<br>:01/80/050/00302/AM20/	RLA File<br>:34/24/040/00330/AM20/	Lic.No/Date:3410045800<br>21.01.2020	Pending<br>with Firm

82 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

Case No.:9/21/80-ALC2/2019	Party Name: MICRON	Meet No/Date:5/80-	Status:
	INSTRUMENTS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00303/AM20/	RLA File<br>:05/24/040/00398/AM20/	Lic.No/Date:0510413428<br>23.01.2020	Pending<br>with Firm

83 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 24.07.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:10/21/80-ALC2/2019	Party Name: THERMAL	Meet No/Date:5/80-	Status:
	SYSTEMS (HYDERABAD)	ALC2/2020	Deferred
	P.LTD.	10.09.2020
HQ File<br>:01/80/050/00304/AM20/	RLA File<br>:09/24/040/00506/AM20/	Lic.No/Date:0910068410<br>24.01.2020	Pending<br>with Firm

84 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:12/21/80-ALC2/2019	Party Name: KAY BOUVET	Meet No/Date:5/80-	Status:
	ENGINEERING LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00306/AM20/	RLA File<br>:31/83/040/00139/AM20/	Lic.No/Date:3110067666<br>27.01.2020	Pending<br>with Firm

85 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 27.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

24 | P a g e

==> picture [476 x 210] intentionally omitted <==

----- Start of picture text ----- Case No.:13/21/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410045818 :01/80/050/00307/AM20/ :34/24/040/00336/AM20/ 28.01.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 86 1. Quantity of relevant import items at Sl. No. 1 to 20 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 21 may be allowed net to net basis. 3. Quantity of relevant import item at Sl. No. 27 may be allowed as 1.01 Kgs/Kg content in the export product. 4. Quantity of relevant import items at Sl. No. 22 to 26 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 197] intentionally omitted <==

----- Start of picture text ----- Case No.:14/21/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410045819 :01/80/050/00308/AM20/ :34/24/040/00337/AM20/ 28.01.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 87 1. Quantity of relevant import items at Sl. No. 1 to 5 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 6 may be allowed as 1.01 Kgs/Kg content in the export product. 3. Quantity of relevant import items at Sl. No. 7 to 12 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:15/21/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410045820 :01/80/050/00309/AM20/ :34/24/040/00338/AM20/ 28.01.2020

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under:

Quantity of relevant import items at Sl. No. 1 to 8 may be allowed as per GN-4.
Quantity of relevant import item at Sl. No. 9 may be allowed as 1.01 Kgs/Kg content in the export product.
Quantity of relevant import items at Sl. No. 10 to 11 may be allowed as 1.05 Kgs/Kg content in the export product.

25 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:17/21/80-ALC2/2019 Party Name: AVLIGHT Meet No/Date:5/80- Status: AUTOMOTIVES PVT. LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510413478 Pending :01/80/050/00311/AM20/ :05/23/040/00359/AM20/ 29.01.2020 with MSME 89 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 16.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:18/21/80-ALC2/2019	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00312/AM20/	RLA File<br>:34/24/040/00341/AM20/	Lic.No/Date:3410045830<br>30.01.2020	Pending<br>with Firm

90 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

Case No.:19/21/80-ALC2/2019	Party Name: BENGAL	Meet No/Date:5/80-	Status:
	INDUSTRIES PVT. LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00313/AM20/	RLA File<br>:05/23/040/00415/AM20/	Lic.No/Date:0510413481<br>30.01.2020	Pending<br>with Firm

91 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 27.08.2020. However, no reply has been received yet. Therefore, the Committee decided to send a reminder to the firm for furnishing the requisite information within 15 days.

Case is deferred.

Case No.:20/21/80-ALC2/2019	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00314/AM20/	RLA File<br>:34/24/040/00344/AM20/	Lic.No/Date:3410045838<br>30.01.2020	Pending<br>with Firm

92 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

26 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:21/21/80-ALC2/2019 Party Name: BHARAT HEAVY Meet No/Date:5/80- Status: ELECTRICALS LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:1110028681 Pending :01/80/050/00315/AM20/ :11/24/040/00011/AM20/ 31.01.2020 with DPIIT 93 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 03.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:22/21/80-ALC2/2019	Party Name: JAIN IRRIGATION	Meet No/Date:5/80-	Status:
	SYSTEMS LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00316/AM20/	RLA File<br>:03/94/040/00435/AM20/	Lic.No/Date:0310834593<br>03.02.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:23/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068441 Pending :01/80/050/00317/AM20/ :09/24/040/00557/AM20/ 03.02.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 95 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

27 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:24/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068442 Pending :01/80/050/00318/AM20/ :09/24/040/00559/AM20/ 03.02.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 96 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:25/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068443 Pending :01/80/050/00319/AM20/ :09/24/040/00552/AM20/ 03.02.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 97 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging, and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

28 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:26/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068444 Pending :01/80/050/00320/AM20/ :09/24/040/00554/AM20/ 03.02.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 98 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging, and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:27/21/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068445 Pending :01/80/050/00321/AM20/ :09/24/040/00553/AM20/ 03.02.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 99 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging, and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

29 | P a g e

Case No.:31/21/80-ALC2/2019	Party Name: TEMA INDIA	Meet No/Date:5/80-	Status:
	LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00325/AM20/	RLA File<br>:03/95/040/01062/AM20/	Lic.No/Date:0310834668<br>06.02.2020	Pending<br>with Firm

100 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 20.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:15/22/80-ALC2/2019 Party Name: SULZER INDIA Meet No/Date:5/80- Status: PRIVATE LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3110067680 Pending :01/80/050/00341/AM20/ :31/83/040/00145/AM20/ 11.02.2020 with Firm 101 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 20.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

==> picture [476 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:2/23/80-ALC2/2019 Party Name: MANN AND Meet No/Date:5/80- Status: HUMMEL FILTER PVT.LTD. ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0710116157 :01/80/050/00347/AM20/ :07/24/040/00271/AM20/ 20.02.2020 102 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of DHI as under: 1. Quantity of relevant import items may be allowed as per GN-4 without any wastage on weight & number terms. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:4/23/80-ALC2/2019	Party Name: RONCH	Meet No/Date:5/80-	Status:
	POLYMERS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00349/AM20/	RLA File<br>:03/95/040/01089/AM20/	Lic.No/Date:0310834951<br>20.02.2020

103 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to Consultant (Tech-1) on 04.09.2020 for examination of the case. However, Consultant (Tech 1) informed that the reply which firm had submitted for their AA 0310833381 dated 12.12.2019 is insufficient. Hence, the Committee decided to inform the firm to submit their reply in the matter at the earliest.

Case is deferred.

30 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:3/23/80-ALC2/2019 Party Name: AVLIGHT Meet No/Date:5/80- Status: AUTOMOTIVES LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510413679 Pending :01/80/050/00348/AM20/ :05/23/040/00424/AM20/ 21.02.2020 with MSME 104 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 16.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [476 x 197] intentionally omitted <==

----- Start of picture text ----- Case No.:5/23/80-ALC2/2019 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410045900 :01/80/050/00350/AM20/ :34/24/040/00368/AM20/ 21.02.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 105 1. Quantity of relevant import items at Sl. No. 1 to 6 & 9 may be allowed as per GN-4. 2. Quantity of relevant import items at Sl. No. 7 may be allowed as 1.05 Kgs/Kg content in the export product. 3. Quantity of relevant import item at Sl. No. 8 may be allowed as 1.01 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 66] intentionally omitted <==

----- Start of picture text ----- Case No.:6/23/80-ALC2/2019 Party Name: L & T-MHPS Meet No/Date:5/80- Status: TURBINE GENERATORS ALC2/2020 Deferred PRIVATE LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0310835043 Pending :01/80/050/00351/AM20/ :03/95/040/01074/AM20/ 25.02.2020 with Firm ----- End of picture text -----

106 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 20.05.2020 followed by a reminder on 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

Case No.:7/23/80-ALC2/2019	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00352/AM20/	RLA File<br>:34/24/040/00375/AM20/	Lic.No/Date:3410045913<br>28.02.2020	Pending<br>with Firm

107 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 09.03.2020 followed by a reminder on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application.

Case is deferred.

31 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:8/23/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068531 Pending :01/80/050/00353/AM20/ :09/24/040/00595/AM20/ 02.03.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 108 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:9/23/80-ALC2/2019 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068532 Pending :01/80/050/00354/AM20/ :09/24/040/00594/AM20/ 02.03.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

109

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

32 | P a g e

==> picture [476 x 155] intentionally omitted <==

----- Start of picture text ----- Case No.:12/23/80- Party Name: ACEINOTEC Meet No/Date:5/80- Status: ALC2/2019 MANUFACTURING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File :07/24/040/00294/AM20/ Lic.No/Date:0710116194 Pending with :01/80/050/00357/AM20/ 02.03.2020 Firm 110 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of MSME: 1. Per unit weight of each export product. 2. Manufacturing processes performed on casting blanks with step wise wastage and material balancing. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:1/1/80- Party Name: AAVID Meet No/Date:5/80- Status: ALC2/2020 THERMALLOY INDIA PVT. LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File :34/24/040/00395/AM20/ Lic.No/Date:3410045959 Pending with :01/80/050/00377/AM20/ 18.03.2020 Firm 111 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:2/1/80-ALC2/2020		Party Name: AVLIGHT		Meet No/Date:5/80-		Status:
		AUTOMOTIVES PVT. LTD.		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00378/AM20/		RLA File<br>:05/23/040/00470/AM20/		Lic.No/Date:0510413923<br>19.03.2020		Pending<br>with MSME

112

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 16.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

113

Case No.:5/1/80-ALC2/2020 Party Name: WHEELS INDIA Meet No/Date:5/80- Status: LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0410166653 :01/80/050/00381/AM21/ :04/24/040/00205/AM20/ 02.04.2020

Decision: The Committee considered the case as per the agenda and decided to refer the case to Consultant (Tech-3) for examination & comments.

Case is deferred.

Case No.:6/1/80-ALC2/2020		Party Name: NEO STRUCTO		Meet No/Date:5/80-		Status:
		CONSTRUCTION PVT. LTD.		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00382/AM21/		RLA File<br>:52/24/040/00083/AM20/		Lic.No/Date:5210043372<br>04.04.2020		Pending<br>with DPIIT

114 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 08.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

33 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:7/1/80-ALC2/2020 Party Name: UNI VTL Meet No/Date:5/80- Status: PRECISION PVT. LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0710116329 Pending :01/80/050/00383/AM21/ :07/24/040/00002/AM21/ 07.04.2020 with Firm 115 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

==> picture [476 x 247] intentionally omitted <==

----- Start of picture text ----- Case No.:11/1/80-ALC2/2020 Party Name: IND-SPHINX Meet No/Date:5/80- Status: PRECISION LIMITED ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3010105121 :01/80/050/00387/AM21/ :30/24/040/00140/AM20/ 07.04.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: ITCHS Sl. ITCHS Recommended Export Item Quantity Import Item Code No. Code Norms 116 Tungsten carbide shank Net to net basis PCB Drill made 1 73269091 dia 3.25+/-0.20mm, with nil wastage from composite length 25+/-2.00mm and accountability blank of Tungsten Tungsten Carbide Pin, Net to net basis Carbide of drill, 100000 2 82090090 dia 5.25+/-1.50mm and with nil wastage 82075000 dia 3.20 mm to Number length 13+/-2.00mm and accountability 6.50mm with shank a) Diamond Grinding dia 3.175 mm and 3 68042190 Wheel, b) Marking Upto 5% of FoB Solution, c) Ultrasonic value length 38.10 mm Solution (5% of FoB) 1. Weight of export item will be equal to weight of import item Sl. No. 1 & 2. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:8/1/80-ALC2/2020 Party Name: AUTO TECH Meet No/Date:5/80- Status: INDUSTRIES INDIA PVT LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0410166662 Pending :01/80/050/00384/AM21/ :04/24/040/00002/AM21/ 08.04.2020 with Firm 117 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:9/1/80-ALC2/2020		Party Name: NIPHA EXPORTS		Meet No/Date:5/80-		Status:
		PRIVATE LIM ITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00385/AM21/		RLA File<br>:02/24/040/00199/AM20/		Lic.No/Date:0210209839<br>09.04.2020		Pending<br>with Firm

118 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

34 | P a g e

Case No.:10/1/80-ALC2/2020		Party Name: TPI COMPOSITES		Meet No/Date:5/80-		Status:
		INDIA PRIVATE LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00386/AM21/		RLA File<br>:04/24/040/00001/AM21/		Lic.No/Date:0410166666<br>13.04.2020		Pending<br>with Tech-3

119

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-3) on 14.09.2020 for examination. However, Consultant (Tech 3) suggested referring the case to Consultant (Tech 1). Therefore, the Committee decided to forward the case to Consultant (Tech 1).

Case is deferred.

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:13/1/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00647/AM20/ Lic.No/Date:0910068616 Pending with :01/80/050/00389/AM21/ 17.04.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 2. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 120 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 257] intentionally omitted <==

----- Start of picture text ----- Case No.:14/1/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00648/AM20/ Lic.No/Date:0910068617 Pending with :01/80/050/00390/AM21/ 17.04.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 121 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

35 | P a g e

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:15/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068618 Pending :01/80/050/00391/AM21/ :09/24/040/00649/AM20/ 17.04.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 122 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:16/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068619 Pending :01/80/050/00392/AM21/ :09/24/040/00650/AM20/ 17.04.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 123 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

36 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:17/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068620 Pending :01/80/050/00393/AM21/ :09/24/040/00651/AM20/ 17.04.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 124 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:18/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068621 Pending :01/80/050/00394/AM21/ :09/24/040/00652/AM20/ 17.04.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

125

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

37 | P a g e

Case No.:19/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068622 Pending :01/80/050/00395/AM21/ :09/24/040/00653/AM20/ 17.04.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

126

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:20/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068623 Pending :01/80/050/00396/AM21/ :09/24/040/00654/AM20/ 17.04.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

127

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

38 | P a g e

==> picture [476 x 171] intentionally omitted <==

----- Start of picture text ----- Case No.:12/1/80- Party Name: UNDERCARRIAGE Meet No/Date:5/80- Status: ALC2/2020 AND TRACTOR PARTS ALC2/2020 Approved PRIVATE LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0310835622 :01/80/050/00388/AM21/ :03/95/040/01188/AM20/ 18.04.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per 128 written comments of MSME as under: 1. Quantity of relevant import items at Sl. No. 15 may be allowed as 513419 Kgs inclusive of 35.10% wastage after affecting 1/3 [rd] recovery from scrap. 2. Quantity of rest of the import items may be allowed as per GN-4. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

129

Case No.:21/1/80-ALC2/2020	Party Name: TPI COMPOSITES	Meet No/Date:5/80-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00397/AM21/	RLA File<br>:04/24/040/00003/AM21/	Lic.No/Date:0410166684<br>22.04.2020	Pending<br>with Tech-3

Case is deferred.

==> picture [476 x 156] intentionally omitted <==

----- Start of picture text ----- Case No.:22/1/80-ALC2/2020 Party Name: ACEINOTEC Meet No/Date:5/80- Status: MANUFACTURING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0710116365 Pending :01/80/050/00398/AM21/ :07/24/040/00016/AM21/ 23.04.2020 with Firm 130 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of MSME: 1. Per unit weight of each export product. 2. Manufacturing processes performed on casting blanks with step wise wastage and material balancing. Case is deferred. ----- End of picture text -----

==> picture [476 x 188] intentionally omitted <==

----- Start of picture text ----- Case No.:23/1/80-ALC2/2020 Party Name: KINECO KAMAN Meet No/Date:5/80- Status: COMPOSITES - INDIA PVT ALC2/2020 Deferred LTD 10.09.2020 HQ File RLA File Lic.No/Date:0310835847 Pending :01/80/050/00399/AM21/ :03/94/040/01087/AM20/ 25.04.2020 with Firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/193/2019-TSW dated 13.08.2020 : 131 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 3. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 4. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables. ----- End of picture text -----

39 | P a g e

Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
Details of import items at Sl. No. 13, 20, 22, 25 & 30 (As description has been indicated in codeNumber) and their specific use in the export items.
Quantities of import items (Components, raw materials, consumable wise) to be accounted for in the export products.
Basis/justification for the quantities of import items.

Case is deferred.

Case No.:24/1/80-	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
ALC2/2020	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00400/AM21/	RLA File :34/24/040/00022/AM19/	Lic.No/Date:3410046010<br>27.04.2020	Pending with<br>Firm

132 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. DRIPNET PC and justification for 5% wastage.

Case is deferred.

==> picture [476 x 249] intentionally omitted <==

----- Start of picture text ----- Case No.:25/1/80- Party Name: NETAFIM Meet No/Date:5/80- Status: ALC2/2020 IRRIGATION INDIA ALC2/2020 Approved PVT.LTD. 10.09.2020 HQ File RLA File Lic.No/Date:3410046013 :01/80/050/00401/AM21/ :34/24/040/00028/AM19/ 27.04.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under: ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Norms 133 Code No. Code 1.02 Kgs/Kg content in Micro Irrigation 1 39011010 LLDPE the export product Equipment Masterbatch 1.02 Kgs/Kg content in (Emitting Pipe 2 32064990 950000 (Plasblak) the export product 84248200 System) Pe Pipe 16/ Meter 1.02 Kgs/Kg content in 2.5/ 1.2mm 400m 3 39012000 HDPE IND Net Weight the export product 51.46 GMS/MTR 4 32064990 Color 1.02 Kgs/Kg content in Masterbatch the export product RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

40 | P a g e

Case No.:26/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA ALC2/2020 Approved PVT.LTD. 10.09.2020 HQ File RLA File Lic.No/Date:3410046015 :01/80/050/00402/AM21/ :34/24/040/00088/AM19/ 27.04.2020

Case No.:26/1/80-ALC2/2020Party Name: NETAFIM<br>IRRIGATION INDIA<br>PVT.LTD.<br>Meet No/Date:5/80-<br>ALC2/2020<br>10.09.2020<br>Status:<br>Approved<br>HQ File<br>:01/80/050/00402/AM21/<br>RLA File<br>:34/24/040/00088/AM19/<br>Lic.No/Date:3410046015<br>27.04.2020	Case No.:26/1/80-ALC2/2020 <br> <br>	Case No.:26/1/80-ALC2/2020 <br> <br>	Party Name: NETAFIM<br>IRRIGATION INDIA<br>PVT.LTD.	Party Name: NETAFIM<br>IRRIGATION INDIA<br>PVT.LTD.	Party Name: NETAFIM<br>IRRIGATION INDIA<br>PVT.LTD.	Meet No/Date:5/80-<br>ALC2/2020<br>10.09.2020	Meet No/Date:5/80-<br>ALC2/2020<br>10.09.2020	Meet No/Date:5/80-<br>ALC2/2020<br>10.09.2020
	HQ File<br>:01/80/050/00402/AM21/<br> <br>:		RLA File<br>34/24/040/00088/AM19/			Lic.No/Date:3410046015<br>27.04.2020
134	Decision:The Committee considered the case as per agenda and d<br>written comments ofConsultant (Tech-1)as under:						ecided toratifythe ad-hoc
	ITCHS<br>Code	Export Item	Quantity	Sl.<br>No.	ITCHS<br>Code		Import Item	Recommended Norms
	84248200	Micro Irrigation<br>Equipment<br>(Emitting Pipe<br>System) PE PIPE<br>12/2.5/ 0.9- 1.1MM<br>CL-II 400M IND<br>Net Weight 32.85<br>GMS/MTR	150000<br>Meter	1	39011010		LLDPE
				2	32064990		Masterbatch<br>(Plasblak)	1.02 Kgs/Kg content in<br>the exportproduct
				3	39012000		HDPE	1.02 Kgs/Kg content in<br>the exportproduct
				4	32064990		Color<br>Masterbatch<br>(Plasblak)	1.02 Kgs/Kg content in<br>the export product
	RA concerned maytake further necessaryaction asper the decision o						f NC.

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under:

Case No.:27/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00403/AM21/	RLA File<br>:34/24/040/00245/AM19/	Lic.No/Date:3410046016<br>27.04.2020

135

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-1) on 22.07.2020 for examination of the case. However, Consultant (Tech-1) requested to send again the copy of application to examine the case. Therefore, the Committee decided to send again a copy of application to Consultant (Tech-1).

Case is deferred.

Case No.:28/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00404/AM21/	RLA File<br>:34/24/040/00267/AM18/	Lic.No/Date:3410046009<br>27.04.2020	Pending<br>with Firm

136 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Generic name of import item at Sl. No. 5 (HI KAFRIT) .

Case is deferred.

==> picture [476 x 96] intentionally omitted <==

----- Start of picture text ----- Case No.:29/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020 Deferred 10.09.2020 137 HQ File RLA File Lic.No/Date:3410046014 :01/80/050/00405/AM21/ :34/24/040/00313/AM16/ 27.04.2020 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-1) on 04.08.2020 for examination of the case. However, Consultant (Tech-1) requested to ----- End of picture text -----

41 | P a g e

send again the copy of application to examine the case. Therefore, the Committee decided to send again a copy of application to Consultant (Tech-1).

Case is deferred.

==> picture [476 x 250] intentionally omitted <==

----- Start of picture text ----- Case No.:30/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA ALC2/2020 Approved PVT.LTD. 10.09.2020 HQ File RLA File Lic.No/Date:3410046012 :01/80/050/00406/AM21/ :34/24/040/00326/AM18/ 27.04.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under: ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Norms 138 Code No. Code Micro Irrigation 1 39011090 LDPE 1.02 Kgs/Kg content in Equipments the export product (Emmitting Pipe 1.02 Kgs/Kg content in 2 39011010 LLDPE System) PE PIPE 150000 the export product 84248200 20/4/ 1.5-1.7MM Meter Masterbatch 1.02 Kgs/Kg content in 3 32064990 400M IND (Plasblak) the export product Net Weight 91.90 Color 1.02 Kgs/Kg content in 4 32064990 GMS/MTR Masterbatch the export product RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:31/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00407/AM21/	RLA File<br>:34/24/040/00368/AM18/	Lic.No/Date:3410046011<br>27.04.2020	Pending<br>with Firm

139 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. DRIPNET PC and justification for 5% wastage.

Case is deferred.

Case No.:32/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00408/AM21/	RLA File<br>:34/24/040/00246/AM18/	Lic.No/Date:3410046017<br>27.04.2020	Pending<br>with Firm

140 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage.

Case is deferred.

42 | P a g e

Case No.:33/1/80- Party Name: NETAFIM Meet No/Date:5/80- Status: ALC2/2020 IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Approved HQ File RLA File :34/24/040/00375/AM18/ Lic.No/Date:3410046018 :01/80/050/00409/AM21/ 27.04.2020

Case No.:33/1/80-<br>ALC2/2020<br>Party Name: NETAFIM<br>IRRIGATION INDIA PVT.LTD.<br>Meet No/Date:5/80-<br>ALC2/2020&10.09.2020<br>Status:<br>Approved<br>HQ File<br>:01/80/050/00409/AM21/<br>RLA File :34/24/040/00375/AM18/ Lic.No/Date:3410046018<br>27.04.2020	Case No.:33/1/80-<br>ALC2/2020	Case No.:33/1/80-<br>ALC2/2020	Party Name: NETAFIM<br>IRRIGATION INDIA PVT.LTD.	Party Name: NETAFIM<br>IRRIGATION INDIA PVT.LTD.	Party Name: NETAFIM<br>IRRIGATION INDIA PVT.LTD.	Party Name: NETAFIM<br>IRRIGATION INDIA PVT.LTD.	Meet No/Date:5/80-<br>ALC2/2020&10.09.2020	Meet No/Date:5/80-<br>ALC2/2020&10.09.2020	Meet No/Date:5/80-<br>ALC2/2020&10.09.2020
	HQ File<br>:01/80/050/00409/AM21/		RLA File :34/24/040/00375/AM18/				Lic.No/Date:3410046018<br>27.04.2020
141	Decision:The Committee considered the case as per agenda and<br>written comments ofConsultant (Tech-1)as under:
	ITCHS<br>Code	Export Item		Quantity	Sl.<br>No.	ITCHS<br>Code		Import Item	Recommended Norms
	84248200	Micro Irrigation<br>Equipment<br>(Emmiting Pipe<br>System) PE Pipe<br>16/2.5/1.2MM<br>400M IND Net<br>Weight 51.46<br>GMS/METER		300000<br>Meter	1	39011010		LLDPE
					2	32064990		Masterbatch<br>(Plasblak)	1.02 Kgs/Kg content in<br>the exportproduct
					3	39012000		HDPE	1.02 Kgs/Kg content in<br>the exportproduct
					4	32064990		Color<br>Masterbatch	1.02 Kgs/Kg content in<br>the exportproduct
	RA concerned maytake further necessaryaction asper the decision of NC.

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under:

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:34/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046019 Pending :01/80/050/00410/AM21/ :34/24/040/00250/AM18/ 27.04.2020 with Firm 142 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1): 1. Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:35/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046020 Pending with :01/80/050/00411/AM21/ :34/24/040/00289/AM18/ 27.04.2020 Firm 143 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1): 1. Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:36/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046021 Pending with :01/80/050/00412/AM21/ :34/24/040/00251/AM18/ 27.04.2020 Firm 144 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1): 1. Exact specification of import item i.e. MICRO DRIP DRIPPER and justification for 5% wastage. Case is deferred. ----- End of picture text -----

43 | P a g e

Case No.:37/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00413/AM21/	RLA File<br>:34/24/040/00395/AM18/	Lic.No/Date:3410046022<br>27.04.2020	Pending<br>with Firm

145 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. EMITTERS DRIPPER and justification for 5% wastage. Case is deferred.

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:38/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3410046023 Pending :01/80/050/00414/AM21/ :34/24/040/00310/AM18/ 27.04.2020 with Firm 146 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1): 1. Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage. Case is deferred. ----- End of picture text -----

Case No.:39/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00415/AM21/	RLA File<br>:34/24/040/00258/AM18/	Lic.No/Date:3410046024<br>27.04.2020	Pending<br>with Firm

147 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. MICRO DRIP DRIPPER and justification for 5% wastage. Case is deferred.

Case No.:40/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00416/AM21/	RLA File<br>:34/24/040/00268/AM18/	Lic.No/Date:3410046025<br>27.04.2020	Pending<br>with Firm

148 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

44 | P a g e

Case No.:41/1/80- Party Name: NETAFIM Meet No/Date:5/80- ALC2/2020 IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 HQ File RLA File :34/24/040/00187/AM19/ Lic.No/Date:3410046026 :01/80/050/00417/AM21/ 27.04.2020

Status: Approved

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under:

149

==> picture [445 x 119] intentionally omitted <==

----- Start of picture text ----- ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Norms Code No. Code Micro Irrigation 1 39011090 LDPE 1.02 Kgs/Kg content in Equipment the export product (Emmitting Pipe 1.02 Kgs/Kg content in 2 39011010 LLDPE System) PE Pipe 150000 the export product 84248200 20/4/ 1.5-1.7MM Meter Masterbatch 1.02 Kgs/Kg content in 3 32064990 400M IND Net (Plasblak) the export product Weight 91.90 Color 1.02 Kgs/Kg content in 4 32064990 GMS/METER Masterbatch the export product ----- End of picture text -----

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:42/1/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00639/AM20/ Lic.No/Date:0910068678 Pending with :01/80/050/00418/AM21/ 28.04.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 150 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? 4. Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 5. What is the Rockwell Hardness Number of the final product and forged blank? 6. Detail of any heat treatment, if required. 7. What is the weight of final export item? 8. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 9. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:43/1/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068679 Pending :01/80/050/00419/AM21/ :09/24/040/00640/AM20/ 28.04.2020 with Firm

151 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

45 | P a g e

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:44/1/80- Party Name: NETAFIM IRRIGATION Meet No/Date:5/80- Status: ALC2/2020 INDIA PVT.LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File :34/24/040/00192/AM18/ Lic.No/Date:3410046027 Pending with :01/80/050/00420/AM21/ 28.04.2020 Firm

152 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):
1. Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage.

Case is deferred.

Case No.:45/1/80- Party Name: NETAFIM Meet No/Date:5/80- Status: ALC2/2020 IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Approved HQ File RLA File :34/24/040/00342/AM18/ Lic.No/Date:3410046028 :01/80/050/00421/AM21/ 28.04.2020

Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of Consultant (Tech-1) as under:

153

==> picture [446 x 119] intentionally omitted <==

----- Start of picture text ----- ITCHS Export Item Quantity Sl. ITCHS Import Item Recommended Norms Code No. Code Micro Irrigation 1 39011010 LLDPE 1.02 Kgs/Kg content in Equipment the export product (Emmiting Pipe Masterbatch 1.02 Kgs/Kg content in 2 32064990 System) PE Pipe 350000 (Plasblak) the export product 84248200 16/2.5/1.2MM Meter Color 1.02 Kgs/Kg content in 3 32064990 400M IND Net Masterbatch the export product Weight 48.568 1.02 Kgs/Kg content in 4 39012000 HDPE GMS/METER the export product ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:46/1/80- Party Name: NETAFIM Meet No/Date:5/80- Status: ALC2/2020 IRRIGATION INDIA PVT.LTD. ALC2/2020&10.09.2020 Deferred HQ File RLA File :34/24/040/00325/AM18/ Lic.No/Date:3410046029 Pending with :01/80/050/00422/AM21/ 28.04.2020 Firm 154 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 04.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

46 | P a g e

155

Case No.:47/1/80-ALC2/2020	Party Name: NETAFIM	Meet No/Date:5/80-	Status:
	IRRIGATION INDIA PVT.LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00423/AM21/	RLA File<br>:34/24/040/00030/AM20/	Lic.No/Date:3410046030<br>28.04.2020	Pending<br>with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (Tech-1):

Exact specification of import item i.e. STREMLIN DRIP and justification for 5% wastage.

Case is deferred.

==> picture [476 x 119] intentionally omitted <==

----- Start of picture text ----- Case No.:48/1/80-ALC2/2020 Party Name: NETAFIM Meet No/Date:5/80- Status: IRRIGATION INDIA PVT.LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3410046031 156 :01/80/050/00424/AM21/ :34/24/040/00029/AM20/ 28.04.2020 Decision: The Committee considered the case as per the agenda and noted that a copy of application is being sent to Consultant (Tech-1) for examination of the case. Case is deferred. ----- End of picture text -----

==> picture [476 x 327] intentionally omitted <==

----- Start of picture text ----- Case No.:49/1/80-ALC2/2020 Party Name: HUMANETICS Meet No/Date:5/80- Status: INNOVATIVE SOLUTIONS ALC2/2020 Deferred INDIA PRIVATE LIMI 10.09.2020 HQ File RLA File Lic.No/Date:0710116407 Pending :01/80/050/00425/AM21/ :07/24/040/00001/AM21/ 30.04.2020 with firm Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of DPIIT vide U. O. No.: P-47011/193/2019-TSW dated 13.08.2020 : 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Information about the inputs required per unit of the resultant product as per Sl. No. 1 of Appendix-11A appearing in current HBP (Vol.I) separately for each product. 157 3. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 4. Bifurcated quantities of components to be accounted for in the resultant product and the requirement of components as spares. Raw Material / Consumables. 5. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 6. Total requirement of each import items, export product wise in a tabular form. Case is deferred. ----- End of picture text -----

47 | P a g e

158

	Case No.:50/1/80-ALC2/2020		Party Name: AVLIGHT		Meet No/Date:5/80-		Status:
			AUTOMOTIVES PVT. LTD.		ALC2/2020&10.09.2020		Deferred
	HQ File<br>:01/80/050/00426/AM21/		RLA File<br>:05/23/040/00005/AM21/		Lic.No/Date:0510414101<br>04.05.2020		Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 21.07.2020 followed by a reminder on 04.09.2020. However, no information has been received yet. Therefore, the Committee decided to remind again the firm for submitting the complete set of application. Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:51/1/80-ALC2/2020 Party Name: TEGA Meet No/Date:5/80- Status: INDUSTRIES LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0210209859 Pending :01/80/050/00427/AM21/ :02/24/040/00005/AM21/ 06.05.2020 with Firm 159 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 24.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:52/1/80-		Party Name: DEE DEVELOPMENT		Meet No/Date:5/80-		Status:
ALC2/2020		ENGINEERS LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00428/AM21/		RLA File :05/23/040/00020/AM21/		Lic.No/Date:0510414127<br>08.05.2020		Pending with<br>DHI

160 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 16.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [476 x 259] intentionally omitted <==

----- Start of picture text ----- Case No.:53/1/80-ALC2/2020 Party Name: MICRON Meet No/Date:5/80- Status: INSTRUMENTS PVT LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:0510414135 :01/80/050/00429/AM21/ :05/24/040/00746/AM20/ 08.05.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of DPIIT vide U. O. No.: P-47012/15/2020-TSW dated 25.08.2020 as under: ITCHS Export Quantity ITCHS Import Item Recommended Code Item Code Norms Net to net basis with 161 68151010 Fibre Glass Tube Dia 64.5X69.5 LG346. accountability Item No.80828-SP. Component clause FZ149 Sub Round Steel Bars, Material Grade 21831.50Kgs @ 11740 SITHERM 2743 Corresponding to old 1.58 Kgs/Kg 93069000 Assembly Number french material grade 60 NCD VII hot content in the 72285020 rolled, soft annealed, cold drawn depth export product after superficial decarburization max. 0.2 mm taking 15% hardness max.270 HB. In random length recovery from scrap of approx .3-5m. Sitherm 2743 Note: The export item shall contain 13820 Kgs of stainless-steel component. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

48 | P a g e

Case No.:54/1/80-ALC2/2020	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00430/AM21/	RLA File<br>:34/24/040/00021/AM21/	Lic.No/Date:3410046049<br>11.05.2020	Pending<br>with Firm

162

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.07.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:1/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068852 Pending :01/80/050/00475/AM21/ :09/24/040/00132/AM21/ 05.06.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 163 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:2/3/80-ALC2/2020	Party Name: PRECISION	Meet No/Date:5/80-	Status:
	EQUIPMENTS (CHENNAI)	ALC2/2020	Deferred
	PVT. LTD.	10.09.2020
HQ File<br>:01/80/050/00476/AM21/	RLA File<br>:04/24/040/00036/AM21/	Lic.No/Date:0410166809<br>10.06.2020	Pending<br>with Firm

164

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

49 | P a g e

Case No.:3/3/80-ALC2/2020	Party Name: JOHNSON	Meet No/Date:5/80-	Status:
	MATTHEY INDIA PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00477/AM21/	RLA File<br>:05/23/040/00045/AM21/	Lic.No/Date:0510414366<br>10.06.2020	Pending<br>with Firm

165 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:4/3/80-ALC2/2020 Party Name: AUTOFIT CAR Meet No/Date:5/80- Status: INTERIORS PVT.LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:1010060538 Pending :01/80/050/00478/AM21/ :10/24/040/00018/AM21/ 11.06.2020 with Firm 166 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:5/3/80-ALC2/2020	Party Name: AUTOCOMP	Meet No/Date:5/80-	Status:
	CORPORATION PANSE	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00479/AM21/	RLA File<br>:31/83/040/00012/AM21/	Lic.No/Date:3110067753<br>11.06.2020	Pending<br>with Firm

167 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:6/3/80-ALC2/2020	Party Name: ISGEC HEAVY	Meet No/Date:5/80-	Status:
	ENGINEERING LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00480/AM21/	RLA File<br>:05/23/040/00047/AM21/	Lic.No/Date:0510414386<br>12.06.2020	Pending<br>with Firm

168 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

50 | P a g e

Case No.:7/3/80-ALC2/2020	Party Name: ISGEC HITACHI	Meet No/Date:5/80-	Status:
	ZOSEN LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00481/AM21/	RLA File<br>:05/23/040/00049/AM21/	Lic.No/Date:0510414387<br>12.06.2020	Pending<br>with Firm

169

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

170

Case No.:8/3/80-ALC2/2020	Party Name: CML BIOTECH	Meet No/Date:5/80-	Status:
	PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00482/AM21/	RLA File<br>:10/24/040/00020/AM21/	Lic.No/Date:1010060548<br>15.06.2020

Decision: The Committee considered the case as per the agenda and Consultant (Tech-1) informed that he received wrong application against the above AA. Therefore, the Committee decided to send again a complete set of application to Consultant (Tech-1) for examination & comments.

Case is deferred.

Case No.:9/3/80-ALC2/2020	Party Name: AZAD	Meet No/Date:5/80-	Status:
	ENGINEERING PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00483/AM21/	RLA File<br>:09/24/040/00135/AM21/	Lic.No/Date:0910068868<br>15.06.2020	Pending<br>with Firm

171 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:10/3/80-ALC2/2020	Party Name: AZAD	Meet No/Date:5/80-	Status:
	ENGINEERING PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00484/AM21/	RLA File<br>:09/24/040/00134/AM21/	Lic.No/Date:0910068869<br>15.06.2020	Pending<br>with Firm

172 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

51 | P a g e

Case No.:11/3/80-ALC2/2020	Party Name: AZAD	Meet No/Date:5/80-	Status:
	ENGINEERING PRIVATE	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00485/AM21/	RLA File<br>:09/24/040/00136/AM21/	Lic.No/Date:0910068870<br>15.06.2020	Pending<br>with Firm

173 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:12/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068872 Pending :01/80/050/00486/AM21/ :09/24/040/00133/AM21/ 15.06.2020 with Firm 174 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:13/3/80-ALC2/2020	Party Name: ISGEC HEAVY	Meet No/Date:5/80-	Status:
	ENGINEERING LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00487/AM21/	RLA File<br>:05/23/040/00055/AM21/	Lic.No/Date:0510414402<br>15.06.2020	Pending<br>with Firm

175 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:14/3/80-ALC2/2020	Party Name: AAVID	Meet No/Date:5/80-	Status:
	THERMALLOY INDIA PVT.	ALC2/2020	Deferred
	LTD.	10.09.2020
HQ File<br>:01/80/050/00488/AM21/	RLA File<br>:34/24/040/00058/AM21/	Lic.No/Date:3410046140<br>15.06.2020	Pending with<br>Firm

176 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

52 | P a g e

Case No.:15/3/80-ALC2/2020	Party Name: AAVID	Meet No/Date:5/80-	Status:
	THERMALLOY INDIA PVT.	ALC2/2020	Deferred
	LTD.	10.09.2020
HQ File<br>:01/80/050/00489/AM21/	RLA File<br>:34/24/040/00059/AM21/	Lic.No/Date:3410046141<br>15.06.2020	Pending<br>with Firm

177 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

178

Case No.:16/3/80-ALC2/2020	Party Name: DEE	Meet No/Date:5/80-	Status:
	DEVELOPMENT ENGINEERS	ALC2/2020	Deferred
	LIMITED	10.09.2020
HQ File<br>:01/80/050/00490/AM21/	RLA File<br>:05/23/040/00051/AM21/	Lic.No/Date:0510414434<br>19.06.2020	Pending<br>with DHI

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 16.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:17/3/80-ALC2/2020	Party Name: SULZER INDIA	Meet No/Date:5/80-	Status:
	PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00491/AM21/	RLA File<br>:31/83/040/00019/AM21/	Lic.No/Date:3110067766<br>22.06.2020	Pending<br>with Firm

179 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:18/3/80-ALC2/2020	Party Name: L&T-MHPS	Meet No/Date:5/80-	Status:
	BOILERS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00492/AM21/	RLA File<br>:03/95/040/00161/AM21/	Lic.No/Date:0310836794<br>22.06.2020	Pending<br>with Firm

180 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 27.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

53 | P a g e

==> picture [476 x 237] intentionally omitted <==

----- Start of picture text ----- Case No.:19/3/80-ALC2/2020 Party Name: MICRON Meet No/Date:5/80- Status: INSTRUMENTS PVT LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:0510414479 :01/80/050/00493/AM21/ :05/24/040/00129/AM21/ 24.06.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of DPIIT vide U. O. No.: P-47011/14/2020-TSW dated 24.08.2020 as under: ITCHS Export Item Quantity ITCHS Import Item Recommended 181 Code Code Norms 1139.60Kgs @ Dia4.328 x 3.590 x OFE-OK Copper 2.176 Kgs/Kg .125 Wall, Cu Tube. 802 Tube. Dia 112 mm, content in the export 90229040 Dia4. 328 x 3.590 x 74071090 Number Stress Relief, ASTM product after taking .125 Wall, Cu Tube. C10100 AND F68 40% recovery from Drawing No.15795 scrap Note: Net weight of export item may be specified as523.706 Kgs. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 197] intentionally omitted <==

----- Start of picture text ----- Case No.:20/3/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410046186 :01/80/050/00494/AM21/ :34/24/040/00073/AM21/ 29.06.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 182 1. Quantity of relevant import items at Sl. No. 1 to 5 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 6 may be allowed as 1.01 Kgs/Kg content in the export product. 3. Quantity of relevant import items at Sl. No. 7 to 12 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 195] intentionally omitted <==

----- Start of picture text ----- Case No.:21/3/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410046187 :01/80/050/00495/AM21/ :34/24/040/00074/AM21/ 29.06.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 183 1. Quantity of relevant import items at Sl. No. 1 to 6 & 9 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 7 may be allowed as 1.05 Kgs/Kg content in the export product. 3. Quantity of relevant import item at Sl. No. 8 may be allowed as 1.01 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

54 | P a g e

Case No.:22/3/80-ALC2/2020	Party Name: BONATRANS	Meet No/Date:5/80-	Status:
	INDIA PRIVATE LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00496/AM21/	RLA File<br>:03/94/040/00207/AM21/	Lic.No/Date:0310836946<br>30.06.2020	Pending<br>with Firm

184 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

185

Case No.:23/3/80-	Party Name: MAGNETI MARELLI	Meet No/Date:5/80-	Status:
ALC2/2020	TALBROS CHASSIS SYSTEMS	ALC2/2020	Deferred
	PRIVATE LI	10.09.2020
HQ File<br>:01/80/050/00497/AM21/	RLA File :05/24/040/00140/AM21/	Lic.No/Date:0510414515<br>30.06.2020	Pending with<br>MSME

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 14.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:24/3/80-ALC2/2020		Party Name: MICRON		Meet No/Date:5/80-		Status:
		INSTRUMENTS PVT LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00498/AM21/		RLA File<br>:05/24/040/00134/AM21/		Lic.No/Date:0510414517<br>30.06.2020		Pending<br>with DPIIT

186 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 14.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

187

	Case No.:25/3/80-ALC2/2020		Party Name: MICRON		Meet No/Date:5/80-		Status:
			INSTRUMENTS PVT LTD		ALC2/2020&10.09.2020		Deferred
	HQ File<br>:01/80/050/00499/AM21/		RLA File<br>:05/24/040/00142/AM21/		Lic.No/Date:0510414518<br>30.06.2020		Pending<br>with DPIIT

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 14.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:26/3/80-ALC2/2020		Party Name: THE ANUP		Meet No/Date:5/80-		Status:
		ENGINEERING LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00500/AM21/		RLA File<br>:08/24/040/00076/AM21/		Lic.No/Date:0810148023<br>30.06.2020		Pending<br>with DPIIT

188 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

55 | P a g e

Case No.:27/3/80-ALC2/2020		Party Name: FRIZAIR		Meet No/Date:5/80-		Status:
		PRIVATE LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00501/AM21/		RLA File<br>:09/24/040/00158/AM21/		Lic.No/Date:0910068919<br>30.06.2020		Pending<br>with DPIIT

189 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 14.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:28/3/80-ALC2/2020		Party Name: ONASSIS AUTO		Meet No/Date:5/80-		Status:
		LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00502/AM21/		RLA File<br>:05/24/040/00152/AM21/		Lic.No/Date:0510414546<br>03.07.2020		Pending<br>with MSME

190 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 14.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:29/3/80-ALC2/2020 Party Name: MASU BRAKE Meet No/Date:5/80- Status: PADS PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0510414554 :01/80/050/00503/AM21/ :05/24/040/00156/AM21/ 03.07.2020 191 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to Consultant (Tech-1) on 14.09.2020 for examination of the case. However, Consultant (Tech 1) informed that the reply which firm had submitted for their AA 0310833381 dated 12.12.2019 is insufficient. Hence, the Committee decided to inform the firm to submit their reply in the matter at the earliest. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:30/3/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046197 Pending :01/80/050/00504/AM21/ :34/24/040/00077/AM21/ 07.07.2020 with Firm 192 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

==> picture [476 x 118] intentionally omitted <==

----- Start of picture text ----- Case No.:36/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068933 Pending 193 :01/80/050/00510/AM21/ :09/24/040/00190/AM21/ 07.07.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? ----- End of picture text -----

56 | P a g e

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:37/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068934 Pending :01/80/050/00511/AM21/ :09/24/040/00194/AM21/ 07.07.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

194

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

==> picture [476 x 211] intentionally omitted <==

----- Start of picture text ----- Case No.:38/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068935 Pending :01/80/050/00512/AM21/ :09/24/040/00193/AM21/ 07.07.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 195 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? ----- End of picture text -----

57 | P a g e

Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:39/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068936 Pending :01/80/050/00513/AM21/ :09/24/040/00195/AM21/ 07.07.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

196

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:40/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068937 Pending :01/80/050/00514/AM21/ :09/24/040/00187/AM21/ 07.07.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions

197 thereof.

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

58 | P a g e

==> picture [476 x 280] intentionally omitted <==

----- Start of picture text ----- Case No.:41/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068938 Pending :01/80/050/00515/AM21/ :09/24/040/00188/AM21/ 07.07.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 198 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:42/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068939 Pending :01/80/050/00516/AM21/ :09/24/040/00192/AM21/ 07.07.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

199

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

59 | P a g e

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:43/3/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00189/AM21/ Lic.No/Date:0910068940 Pending with :01/80/050/00517/AM21/ 07.07.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 200 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:44/3/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00191/AM21/ Lic.No/Date:0910068941 Pending with :01/80/050/00518/AM21/ 07.07.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 201 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

Case No.:31/3/80-ALC2/2020		Party Name: ENDURANCE		Meet No/Date:5/80-		Status:
		TECHNOLOGIES LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00505/AM21/		RLA File<br>:03/94/040/00237/AM21/		Lic.No/Date:0310837075<br>08.07.2020		Pending<br>with Firm

202 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

60 | P a g e

Case No.:32/3/80-ALC2/2020	Party Name: SUPER CIRCLE	Meet No/Date:5/80-	Status:
	AUTO LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00506/AM21/	RLA File<br>:05/24/040/00148/AM21/	Lic.No/Date:0510414590<br>08.07.2020

203 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to Consultant (Tech-1) on 14.09.2020 for examination of the case. However, Consultant (Tech 1) informed that the reply which firm had submitted for their AA 0310833381 dated 12.12.2019 is insufficient. Hence, the Committee decided to inform the firm to submit their reply in the matter at the earliest.

Case is deferred.

Case No.:33/3/80-ALC2/2020	Party Name: L & T-MHPS	Meet No/Date:5/80-	Status:
	TURBINE GENERATORS	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00507/AM21/	RLA File<br>:03/95/040/00220/AM21/	Lic.No/Date:0310837100<br>09.07.2020	Pending<br>with Firm

204 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:34/3/80-ALC2/2020	Party Name: L & T-MHPS	Meet No/Date:5/80-	Status:
	TURBINE GENERATORS	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00508/AM21/	RLA File<br>:03/95/040/00219/AM21/	Lic.No/Date:0310837101<br>09.07.2020	Pending<br>with Firm

205 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:35/3/80-ALC2/2020	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD.	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00509/AM21/	RLA File<br>:34/24/040/00076/AM21/	Lic.No/Date:3410046199<br>09.07.2020	Pending<br>with Firm

206 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

61 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:45/3/80-ALC2/2020 Party Name: PENGUIN Meet No/Date:5/80- Status: PETROLEUM SERVICES PVT. ALC2/2020 Deferred LTD. 10.09.2020 HQ File RLA File Lic.No/Date:0310837144 Pending :01/80/050/00519/AM21/ :03/95/040/00147/AM21/ 13.07.2020 with DPIIT 207 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [476 x 141] intentionally omitted <==

----- Start of picture text ----- Case No.:46/3/80-ALC2/2020 Party Name: SULZER PUMPS Meet No/Date:5/80- Status: INDIA LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0310837170 Pending :01/80/050/00520/AM21/ :03/89/040/00069/AM21/ 14.07.2020 with Firm 208 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:47/3/80-ALC2/2020	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00521/AM21/	RLA File<br>:34/24/040/00092/AM21/	Lic.No/Date:3410046223<br>17.07.2020	Pending<br>with Firm

209 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

Case No.:49/3/80-ALC2/2020	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00523/AM21/	RLA File<br>:34/24/040/00093/AM21/	Lic.No/Date:3410046224<br>17.07.2020	Pending<br>with Firm

210 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

62 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:50/3/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046225 Pending :01/80/050/00524/AM21/ :34/24/040/00094/AM21/ 17.07.2020 with Firm 211 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

Case No.:48/3/80-ALC2/2020		Party Name: THE ANUP		Meet No/Date:5/80-		Status:
		ENGINEERING LIMITED		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00522/AM21/		RLA File<br>:08/24/040/00094/AM21/		Lic.No/Date:0810148164<br>20.07.2020		Pending<br>with DPIIT

212 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 15.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [476 x 268] intentionally omitted <==

----- Start of picture text ----- Case No.:51/3/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00217/AM21/ Lic.No/Date:0910068972 Pending with :01/80/050/00525/AM21/ 20.07.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 213 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred. ----- End of picture text -----

214

	Case No.:52/3/80-		Party Name: AZAD ENGINEERING		Meet No/Date:5/80-		Status:
	ALC2/2020		PRIVATE LIMITED		ALC2/2020&10.09.2020		Deferred
	HQ File<br>:01/80/050/00526/AM21/		RLA File :09/24/040/00216/AM21/		Lic.No/Date:0910068973<br>20.07.2020		Pending with<br>Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

63 | P a g e

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

Case No.:53/3/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00215/AM21/ Lic.No/Date:0910068974 Pending with :01/80/050/00527/AM21/ 20.07.2020 Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

215 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
1. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

==> picture [476 x 222] intentionally omitted <==

----- Start of picture text ----- Case No.:54/3/80- Party Name: AZAD ENGINEERING Meet No/Date:5/80- Status: ALC2/2020 PRIVATE LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File :09/24/040/00214/AM21/ Lic.No/Date:0910068975 Pending with :01/80/050/00528/AM21/ 20.07.2020 Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 216 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. ----- End of picture text -----

64 | P a g e

Case is deferred.

==> picture [476 x 279] intentionally omitted <==

----- Start of picture text ----- Case No.:55/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068976 Pending :01/80/050/00529/AM21/ :09/24/040/00213/AM21/ 20.07.2020 with Firm Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB): 1. What is the exact name of the export product? 2. Provide complete neat colored drawing of the product with Top, Side and Front view and dimensions thereof. 217 3. What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions? 4. What is the Rockwell Hardness Number of the final product and forged blank? 5. Detail of any heat treatment, if required. 6. What is the weight of final export item? 7. Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage. 8. A video film on complete operations (Cutting, forging and machining) for manufacturing of export item. Case is deferred ----- End of picture text -----

Case No.:56/3/80-ALC2/2020 Party Name: AZAD Meet No/Date:5/80- Status: ENGINEERING PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0910068977 Pending :01/80/050/00530/AM21/ :09/24/040/00212/AM21/ 20.07.2020 with Firm

Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per comments of Consultant (SKB):

218

What is purpose to bring Stainless Steel Rounds for forging of blanks for finished product? Why not forged SS plate of same the composition for manufacturing of export item, if it is not in round in shape after cutting into required dimensions?
Why such high percentage wastage is generated for manufacturing of turbine parts? Give complete reasons for such a huge wastage.

Case is deferred.

65 | P a g e

Case No.:57/3/80-ALC2/2020	Party Name: TEGA	Meet No/Date:5/80-	Status:
	INDUSTRIES LIMITED	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00531/AM21/	RLA File<br>:02/24/040/00045/AM21/	Lic.No/Date:0210209990<br>21.07.2020	Pending<br>with Firm

219

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application.

Case is deferred.

220

Case No.:58/3/80-ALC2/2020	Party Name: MICRON	Meet No/Date:5/80-	Status:
	INSTRUMENTS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00532/AM21/	RLA File<br>:05/24/040/00186/AM21/	Lic.No/Date:0510414670<br>21.07.2020	Pending<br>with DPIIT

Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 14.09.2020 for examination of the case. However, DPIIT informed that the case is under examination. Hence, the Committee decided to wait for the comments.

Case is deferred.

221

Case No.:59/3/80-ALC2/2020	Party Name: MICRON	Meet No/Date:5/80-	Status:
	INSTRUMENTS PVT LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00533/AM21/	RLA File<br>:05/24/040/00181/AM21/	Lic.No/Date:0510414671<br>21.07.2020	Pending<br>with DPIIT

Case is deferred.

==> picture [476 x 155] intentionally omitted <==

----- Start of picture text ----- Case No.:60/3/80-ALC2/2020 Party Name: GOLD MOHUR Meet No/Date:5/80- Status: PROFILES LIMITED ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:0510414672 Pending :01/80/050/00534/AM21/ :05/23/040/00083/AM21/ 21.07.2020 with Firm 222 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per comments of Consultant (Tech-1): 1. Details of indigenous input with their quantity. 2. Net weight of rubber compound in each of the export product. Case is deferred. ----- End of picture text -----

66 | P a g e

==> picture [476 x 185] intentionally omitted <==

----- Start of picture text ----- Case No.:61/3/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3410046232 :01/80/050/00535/AM21/ :34/24/040/00099/AM21/ 21.07.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 223 1. Quantity of relevant import items at Sl. No. 1 to 5 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 6 may be allowed as 1.01 Kgs/Kg content in the export product. 3. Quantity of relevant import items at Sl. No. 7 to 12 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 186] intentionally omitted <==

----- Start of picture text ----- Case No.:62/3/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3410046233 :01/80/050/00536/AM21/ :34/24/040/00100/AM21/ 21.07.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 224 1. Quantity of relevant import items at Sl. No. 1 to 14, 16 & 17 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 15 may be allowed as 1.01 Kgs/Kg content in the export product. 3. Quantity of relevant import item at Sl. No. 18 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:63/3/80-ALC2/2020		Party Name: I-TECH PLAST		Meet No/Date:5/80-		Status:
		INDIA PVT.LTD.(EOU)		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00537/AM21/		RLA File<br>:03/94/040/00256/AM21/		Lic.No/Date:0310837308<br>22.07.2020		Pending<br>with DPIIT

225 Decision: The Committee considered the case as per agenda and noted that a copy of application was sent to DPIIT on 09.09.2020 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:64/3/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046237 Pending :01/80/050/00538/AM21/ :34/24/040/00095/AM21/ 22.07.2020 with Firm 226 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm and in this regard, an email was sent on 30.08.2020. However, no information has been received yet. Therefore, the Committee decided to remind the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

67 | P a g e

==> picture [476 x 197] intentionally omitted <==

----- Start of picture text ----- Case No.:1/5/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410046277 :01/80/050/00551/AM21/ :34/24/040/00119/AM21/ 11.08.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 227 1. Quantity of relevant import items at Sl. No. 1 to 16 may be allowed as per GN-4. 2. Quantity of relevant import items at Sl. No. 17 to 20 may be allowed as 1.05 Kgs/Kg content in the export product. 3. Quantity of relevant import item at Sl. No. 21 may be allowed as 1.01 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [476 x 198] intentionally omitted <==

----- Start of picture text ----- Case No.:2/5/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020&10.09.2020 Approved HQ File RLA File Lic.No/Date:3410046278 :01/80/050/00552/AM21/ :34/24/040/00118/AM21/ 11.08.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 228 1. Quantity of relevant import items at Sl. No. 1 to 13 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 14 may be allowed on net to net basis. 3. Quantity of relevant import item at Sl. No. 15 may be allowed as 1.01 Kgs/Kg content in the export product. 4. Quantity of relevant import items at Sl. No. 16 to 20 may be allowed as 1.05 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

229

Case No.:3/5/80-ALC2/2020	Party Name: DANIEL	Meet No/Date:5/80-	Status:
	MEASUREMENT SOLUTIONS	ALC2/2020	Deferred
	P LTD	10.09.2020
HQ File<br>:01/80/050/00553/AM21/	RLA File<br>:34/24/040/00117/AM21/	Lic.No/Date:3410046279<br>11.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:4/5/80-ALC2/2020		Party Name: S K INDUSTRIES		Meet No/Date:5/80-		Status:
				ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00554/AM21/		RLA File<br>:34/24/040/00115/AM21/		Lic.No/Date:3410046283<br>11.08.2020		Pending<br>with Firm

230 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

68 | P a g e

231

Case No.:6/5/80-ALC2/2020	Party Name: AUTOCOMP	Meet No/Date:5/80-	Status:
	CORPORATION PANSE	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00556/AM21/	RLA File<br>:31/83/040/00043/AM21/	Lic.No/Date:3110067819<br>13.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

232

Case No.:5/5/80-ALC2/2020	Party Name: TAIKISHA	Meet No/Date:5/80-	Status:
	ENGINEERING INDIA	ALC2/2020	Deferred
	PVT.LTD.	10.09.2020
HQ File<br>:01/80/050/00555/AM21/	RLA File<br>:03/95/040/00275/AM21/	Lic.No/Date:0310837658<br>14.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:11/5/80-ALC2/2020		Party Name: VERTICE		Meet No/Date:5/80-		Status:
		GLOBAL PVT LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00561/AM21/		RLA File<br>:09/24/040/00248/AM21/		Lic.No/Date:0910069043<br>14.08.2020		Pending<br>with Firm

233

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:7/5/80-ALC2/2020		Party Name: MICRON		Meet No/Date:5/80-		Status:
		INSTRUMENTS PVT LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00557/AM21/		RLA File<br>:05/24/040/00226/AM21/		Lic.No/Date:0510414900<br>17.08.2020		Pending<br>with Firm

234 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:8/5/80-ALC2/2020		Party Name: MICRON		Meet No/Date:5/80-		Status:
		INSTRUMENTS PVT LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00558/AM21/		RLA File<br>:05/24/040/00227/AM21/		Lic.No/Date:0510414902<br>17.08.2020		Pending<br>with Firm

235 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

69 | P a g e

Case No.:9/5/80-ALC2/2020		Party Name: RADISH		Meet No/Date:5/80-		Status:
		TECHNOLOGIES		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00559/AM21/		RLA File<br>:06/24/040/00031/AM21/		Lic.No/Date:0610039581<br>18.08.2020		Pending<br>with Firm

236

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

237

Case No.:10/5/80-ALC2/2020	Party Name: MAGNA	Meet No/Date:5/80-	Status:
	AUTOMOTIVE INDIA	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00560/AM21/	RLA File<br>:04/24/040/00066/AM21/	Lic.No/Date:0410166966<br>19.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:12/5/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046299 Pending :01/80/050/00562/AM21/ :34/24/040/00128/AM21/ 19.08.2020 with Firm

238 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:13/5/80-ALC2/2020		Party Name: LM WIND POWER		Meet No/Date:5/80-		Status:
		BLADES INDIA PVT. LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00563/AM21/		RLA File<br>:34/24/040/00129/AM21/		Lic.No/Date:3410046300<br>19.08.2020		Pending<br>with Firm

239

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

240

Case No.:14/5/80-ALC2/2020	Party Name: LM WIND POWER	Meet No/Date:5/80-	Status:
	BLADES INDIA PVT. LTD	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00564/AM21/	RLA File<br>:34/24/040/00131/AM21/	Lic.No/Date:3410046301<br>19.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

70 | P a g e

Case No.:15/5/80-ALC2/2020		Party Name: LM WIND POWER		Meet No/Date:5/80-		Status:
		BLADES INDIA PVT. LTD		ALC2/2020&10.09.2020		Deferred
HQ File<br>:01/80/050/00565/AM21/		RLA File<br>:34/24/040/00130/AM21/		Lic.No/Date:3410046302<br>19.08.2020		Pending<br>with Firm

241

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:16/5/80-ALC2/2020 Party Name: APAR Meet No/Date:5/80- Status: INDUSTRIES LIMITED ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:0310837819 Pending :01/80/050/00566/AM21/ :03/94/040/00279/AM21/ 20.08.2020 with Firm

242 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

243

Case No.:17/5/80-ALC2/2020 Party Name: FITWEL GASKET Meet No/Date:5/80- Status: COMPANY (INDIA) PRIVATE ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:3110067828 Pending :01/80/050/00567/AM21/ :31/83/040/00050/AM21/ 20.08.2020 with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

Case No.:18/5/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD ALC2/2020&10.09.2020 Deferred HQ File RLA File Lic.No/Date:3410046308 Pending :01/80/050/00568/AM21/ :34/24/040/00134/AM21/ 20.08.2020 with Firm

244

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

245

Case No.:19/5/80-ALC2/2020	Party Name: NUCON AMETRA	Meet No/Date:5/80-	Status:
	ELECTRONICS SYSTEMS	ALC2/2020	Deferred
	PRIVATE LIMITED	10.09.2020
HQ File<br>:01/80/050/00569/AM21/	RLA File<br>:09/24/040/00251/AM21/	Lic.No/Date:0910069073<br>20.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

71 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:20/5/80-ALC2/2020 Party Name: DEE Meet No/Date:5/80- Status: DEVELOPMENT ENGINEERS ALC2/2020 Deferred LIMITED 10.09.2020 HQ File RLA File Lic.No/Date:0510414969 Pending :01/80/050/00570/AM21/ :05/23/040/00134/AM21/ 21.08.2020 with Firm 246 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

247

Case No.:21/5/80-ALC2/2020	Party Name: AAVID	Meet No/Date:5/80-	Status:
	THERMALLOY INDIA PVT.	ALC2/2020	Deferred
	LTD.	10.09.2020
HQ File<br>:01/80/050/00571/AM21/	RLA File<br>:34/24/040/00136/AM21/	Lic.No/Date:3410046312<br>24.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

248

Case No.:22/5/80-ALC2/2020	Party Name: ADITYA AUTO	Meet No/Date:5/80-	Status:
	COMPONENTS	ALC2/2020	Deferred
		10.09.2020
HQ File<br>:01/80/050/00572/AM21/	RLA File<br>:07/24/040/00141/AM21/	Lic.No/Date:0710116924<br>24.08.2020	Pending<br>with Firm

Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case.

Case is deferred.

==> picture [476 x 210] intentionally omitted <==

----- Start of picture text ----- Case No.:23/5/80-ALC2/2020 Party Name: HANNING Meet No/Date:5/80- Status: MOTORS INDIA P LTD ALC2/2020 Approved 10.09.2020 HQ File RLA File Lic.No/Date:3410046317 :01/80/050/00573/AM21/ :34/24/040/00138/AM21/ 24.08.2020 Decision: The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per written comments of MSME as under: 249 1. Quantity of relevant import items at Sl. No. 1 to 9 may be allowed as per GN-4. 2. Quantity of relevant import item at Sl. No. 10 may be allowed on net to net basis. 3. Quantity of relevant import items at Sl. No. 11 to 13 & 15 may be allowed as 1.05 Kgs/Kg content in the export product. 4. Quantity of relevant import item at Sl. No. 14 may be allowed as 1.01 Kgs/Kg content in the export product. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

72 | P a g e

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:24/5/80-ALC2/2020 Party Name: LM WIND POWER Meet No/Date:5/80- Status: BLADES INDIA PVT. LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:3410046323 Pending :01/80/050/00574/AM21/ :34/24/040/00139/AM21/ 25.08.2020 with Firm 250 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

==> picture [476 x 130] intentionally omitted <==

----- Start of picture text ----- Case No.:25/5/80-ALC2/2020 Party Name: NEO STRUCTO Meet No/Date:5/80- Status: CONSTRUCTION PVT. LTD. ALC2/2020 Deferred 10.09.2020 HQ File RLA File Lic.No/Date:5210043502 Pending :01/80/050/00575/AM21/ :52/24/040/00036/AM21/ 25.08.2020 with Firm 251 Decision: The Committee considered the case as per the agenda and noted that the copy of application has not yet been received from the firm. Therefore, the Committee decided to ask from the firm to submit the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

73 | P a g e

Minutes of Offline Cases:

Sl. No. 31

==> picture [476 x 73] intentionally omitted <==

----- Start of picture text ----- Case No.: 11/14/80-ALC2/2018 Status: M. No.: 05/80-ALC2/2019 dated 10.09.2020 TIL LIMITED Lic. No. /date: 0210208838 Dated:07.12.2018 HQ. No.: 01/80/050/00327/AM19/ Subject: Request for re-fixation of ad-hoc Approved RLA No.: 02/24/040/00107/AM19 norms Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting ----- End of picture text -----

Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 14/80-ALC2/2018 dated 20.02.2019 as per written comments of DHI vide U.O. No.: DES-1/TILL/OTRS-12019-HEI dated 19.02.2019, while Import item at Sl. No. 142was deleted as the same was not certified as part of export product as per Appendix 4E.

No. 14/80-ALC2/2018 dated 20.02.2019 as per written comments of DHI vide U.O. No.: DES-1/TILL/OTRS-12019-HEI dated 19.02.2019, while Import item at Sl. No. 142was deleted as the same was not certified as part of export product as per Appendix 4E. The firm, vide letter dated 13.08.2019 & 22.01.2020, stated that due to typographical error, the itemwas not mentioned in Appendix 4E, however it is very much required. The party further requested for reinstating Import item at Sl. No.142 on Net to Net basis. The Committee reconsidered the case decided to ratify the ad-hoc norms as per comments of DHI as under: 1. The quantity of import item at Sl. No. 142 may be allowed as per GN-4 with accountability clause . Note: The decision for rest of the import items shall remain unchanged as decided in meeting No. 14/80ALC2/2018 dated20.02.2019. RA concerned may take further necessary action as per the decision of NC.

Sl. No. 32

	Case No.:1/14/80-ALC2/2018<br>Status:
	AUTO COMP INDIA PVT. LTD<br>M. No.: 05/80-ALC2/2019 dated 10.09.2020<br>Lic. No. /date: 3110067225 Date: 02.11.2018

	HQ. No.: 01/80/050/00317/AM19<br>Subject:Request for re-fixation of ad-hoc<br>Approved
	norms<br>RLA No.: 31/83/040/00121/AM19
	Decision:The Committee considered the case as per the agenda and noted that the case was approved in Meeting<br>No.2/80-ALC2/2019 dated24.04.2019 on repeat basis as approved for AA No. 3110067175 dated 12.09.2018 as<br>per the written recommendation of DHI vide their U. O. No.: DES-1/DASI/RDCA-2-2019-HEI dated 28.02.2019.<br>The firm vide letter dated 20.01.2020 has requested for re-fixation of ad-hoc norms. The Committee<br>reconsidered the case and decided to ratify the ad-hoc norms on repeat basis as approved for AA No. 3110043464<br>dated 02.06.2010 as per written comments of DHI as under:<br>ITCHS<br>Code<br>Export Item<br>Quantity<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Norms<br>84836090<br>Hub-Impeller / Coupling (<br>Made from Carbon Steel<br>Seamless Tube ) Carbon<br>Content upto 0.60<br>88.030 MT<br>73043939<br>Carbon Steel<br>Seamless Tubes<br>42% wastage<br>allowed<br>Note:<br>1. The description of import item may be amended as “Carbon Steel Seamless Tubes”.<br>2. Grade of steel to match with import & export.<br>RA concerned maytake further necessaryaction asper the decision of NC.

74 | P a g e

==> picture [476 x 83] intentionally omitted <==

----- Start of picture text ----- Sl. No. 33 Case No.: 4/8/80-ALC2/2018 Status: M. No.: 05/80-ALC2/2019 dated 10.09.2020 CHIRAG UDYOG Lic. No. /date: 0510406909 Date: 19.06.2018 HQ. No.: 01/80/050/00127/AM19 Subject: Request for re-fixation of ad-hoc Deferred RLA No.: 05/23/040/00141/AM19/ norms Decision: The Committee considered the case as per agenda and noted that the case was approved in M. No. 10/80- ----- End of picture text -----

Decision: The Committee considered the case as per agenda and noted that the case was approved in M. No. 10/80ALC2/2019 dated 11.09.2019 on the basis of inputs given by the Technical Authorities present in the meeting.

ALC2/2019 dated 11.09.2019 on the basis of inputs given by the Technical Authorities present in the meeting. The firm vide letter dated 21.10.2019 has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of Consultant (Tech-3): 1. Specific items of export with quantity in numbers & weight. 2. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. Sheet layout diagram of the material indicating the wastage during blanking. Case is deferred.

Sl. No. 34

==> picture [476 x 64] intentionally omitted <==

----- Start of picture text ----- Case No.: 53/3/80-ALC2/2017 Status: M. No.: 05/80-ALC2/2019 dated 10.09.2020 GL&V INDIA PRIVATE LIMITED Lic. No. /date: 3110066640 Date: 29.03.2017 HQ. No.: 01/80/050/00053/AM18/ Subject: Request for fixation of ad-hoc norms Deferred RLA No.: 31/83/040/00185/AM17 ----- End of picture text -----

Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 7/80-ALC2/2019 dated 17.07.2019 due to non-submission of reply of deficiency letter dated 07.03.2019 raised by Consultant (Tech-3). The firm vide letter dated 30.12.2019 has furnished the reply and requested for fixation of ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per comments of Consultant (Tech-3): 1. Hard copy of application & AA. 2. Sl. No. of items which are not be imported now. 3. List of loose items to be exported with quantity & corresponding item of import. 4. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 5. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 6. Sheet layout diagram of the material indicating the wastage during blanking. Case is deferred.

75 | P a g e

Sl. No. 35

M. No.: 05/80-ALC2/2019 dated 10.09.2020<br>GEA Process Engineering,Vadodara<br>Status:
HQ. No.: 01/80/162/AM09/<br>Subject:Request for fixation of ad-hoc norms<br>in respect of 26 exportproduct<br>Deferred
Decision:The firm has stated that they are a 100% Export Oriented Unit having letter of permission (LOP) No.
KASEZ/100%EOU/II/08/09-10/11623 dated 23.11.2009 are the Member of EPC for EOUs and KSEZs. The firm
has stated that the company is an EOU unit and it is registered with Kandla Special Economic Zone (KASEZ) and
there is a requirement by KASEZ that EOU unit needs to fix the norms of its export product.
The firm vide their representation dated 11.01.2020 has requested for fixation of input/output Norms for the
import/export products. The Committee considered the case and noted that a copy of application was sent to
MSME on 08.09.2020 for examination of the case. However, no comments have been received yet. Hence, the
Committee decided to wait for the comments.
Case is deferred.

Sl. No. 36

==> picture [476 x 63] intentionally omitted <==

----- Start of picture text ----- Case No.: 39/27/80-ALC2/2011 Status: M. No.: 05/80-ALC2/2019 dated 10.09.2020 Bharat Heavy Electricals Limited Lic. No. /date: 6110000728 Dated 27.12.2011 HQ. No.: 01/80/050/00572/AM12/ Subject: Request for re-fixation of ad-hoc Deferred RLA No.: 61/24/040/00055/AM12 norms ----- End of picture text -----

Decision: The Committee considered the case as per the agenda and noted that the case was approved in Meeting No. 27/80 dated20.03.2012 as per comments of DHI . It was also noted that the case was considered byPRC in its meeting No. 29 dated 19-11-2013 and Norms Committee M. No. 14 dated 01.10.2013 allowed all the items on net to net basis except items mentioned at Sl. No. 217, 218, 219, 228, 229 & 230. These Six items are not allowed in terms of policy Circular No. 50 dated 28.12.2011. The firm has requested for re-fixation of ad-hoc norms for six import items at Sl. No. 217, 218, 219, 228, 229 & 230 and grant of deemed export benefits against the above six items. The Committee reconsidered the case and noted that Policy-VI division vide their letter dated has stated that the cases of the firm were placed by NC-2 before the PIC in its meeting held on 16.07.2019 wherein a decision has been taken. PC-4/NC-1 may take similar action for a decision in this matter. It was decided to present before the committee complete details /history of the case along with the description of item involved. Case is deferred.

Sl. No. 37

Sl. No. 37
Case No.: 19/3/80-ALC2/2018	Status:
MVM SOLAR PVT.LTD,<br>M. No.: 05/80-ALC2/2019 dated 10.09.2020
Lic. No. /date: 0710111072 Dated 03.02.2017
HQ. No.: 01/80/050/00019/AM19<br>Subject:Request for fixation of ad-hoc norms	Deferred
RLA No.: 07/24/040/00349/AM17
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in Meeting
No. 05/80 dated06.06.2019 due to non-submission of reply of deficiency letter raised byMSME.
The firm vide letter dated 24.01.2020 has furnished the reply and requested for fixation of	ad-hoc norms.
The Committee reconsidered the case and decided to refer the case toMSMEfor examination & comments.
Case is deferred.

76 | P a g e

Sl. No. 38

Case No.: 34/2/80-ALC2/2016			Status:
M. No.: 05/80-ALC2/2019 dated 10.09.2020	TPP BOILERS PVT. LTD
Lic. No. /date: 0310801039 Dated 15.12.2015
HQ. No.: 01/80/050/00037/AM17	Subject:Request for fixation of ad-hoc norms		Deferred
RLA No.: 03/95/040/00696/AM16
Decision:The Committee considered the case as per the agenda and noted that the case was approved in Meeting
No. 02/80 dated26.04.2016as per comments ofDHI.
The firm vide letter dated 29.07.2019 has requested for re-fixation of ad-hoc norms.		The Committee
reconsidered the case and decided to refer the case toDHIfor examination & comments.
Case is deferred.

Sl. No. 39

Case No.: 42/5/80-ALC2/2017<br>PLANSEE INDIA HIGH<br>Status:
PERFORMANCE MATERIALS PVT<br>M. No.: 05/80-ALC2/2019 dated 10.09.2020
LTD<br>Lic. No. /date: 0710108948 Dated 26.10.2015
HQ. No.: 01/80/050/00103/AM18<br>Subject:Request for fixation of ad-hoc norms<br>Deferred
RLA No.: 07/24/040/00192/AM16
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in Meeting
No. 17/80 dated19.12.2017 on the ground that the firm wanted to import Sheets / Plates/ Rods/ Bars etc. and no co-
correlation was established with import /export item. Sheets and plates cannot be machined, and no specific input
items have been claimed.
The firm vide letter dated 24.08.2020has furnished the reply and requested for fixation of ad-hoc norms.
The Committee reconsidered the case and decided to refer the case toDPIITfor examination & comments.
Case is deferred.

Sl. No. 40

Case No.: 19/11/80-ALC2/2018<br>ICEM ENGINEERING COMPANY<br>PRIVATE LIMITED<br>M. No.: 05/80-ALC2/2019 dated 10.09.2020<br>Lic. No. /date: 0310822939 Dated 09.08.2018	Status:
HQ. No.: 01/80/050/00210/AM19<br>Subject:Request for fixation of ad-hoc norms	Deferred
RLA No.: 03/94/040/00306/AM19
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in Meeting
No.23/80 dated13.03.2020 due to non-submission of reply of deficiency letter raised byConsultant (Tech-3).
The firm vide letter dated 19.08.2020furnished the reply and requested for fixation of ad-hoc norms. The
Committee reconsidered the case and decided to refer the case toConsultant (Tech-3)for examination &
comments.
Case is deferred.

Sl. No. 41

Sl. No. 41
Case No.: 26/20/80-ALC2/2017		Status:
M. No.: 05/80-ALC2/2019 dated 10.09.2020	ICEM ENGINEERING COMPANY
Lic. No. /date: 0310817800 Dated 15.12.2017	PRIVATE LIMITED
HQ. No.: 01/80/050/00390/AM18	Subject:Request for fixation of ad-hoc norms	Deferred
RLA No.: 03/94/040/00742/AM18
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in Meeting
No.23/80 dated13.03.2020 due to non-submission of reply of deficiency letter raised byConsultant (Tech-3).
The firm vide letter dated 19.08.2020 furnished the reply and requested for fixation of ad-hoc norms. The
Committee reconsidered the case and decided to refer the case toConsultant (Tech-3)for examination &
comments.
Case is deferred.

77 | P a g e

==> picture [469 x 636] intentionally omitted <==

78 | P a g e

==> picture [469 x 678] intentionally omitted <==

79 | P a g e

==> picture [469 x 620] intentionally omitted <==

80 | P a g e

==> picture [469 x 673] intentionally omitted <==

81 | P a g e

==> picture [469 x 648] intentionally omitted <==

82 | P a g e

==> picture [469 x 661] intentionally omitted <==

83 | P a g e

==> picture [469 x 660] intentionally omitted <==

84 | P a g e

==> picture [469 x 641] intentionally omitted <==

85 | P a g e

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.