IN FORCE Norms Committee — Engineering (Gr B / NC-I) Advance Authorisation 2019-10-23

DGFT Committee Minutes

Document text

MINUTES OF MEETING NO. 13/80 OF NORMS COMMITTEE- I (DES-I SECTION) DATED 23.10.2019

Meeting No. 13/20 of the Norms Committee (NC-I) for the licensing year 2019-2020 held on 23.10.2019 under the Chairmanship of Sh. R.P. Goyal, Additional Director General of Foreign Trade to consider the applications under Duty Exemption/Remission Schemes (Chapter-4) of the applicable Foreign Trade Policy and the Handbook of Procedures. The following Members of the Committee were present in the meeting: -

==> picture [402 x 196] intentionally omitted <==

----- Start of picture text ----- Sl. No. Name of the representatives & their Designation Department 1. Shri S. K. Jain, D. O. DPIIT 2. Shri B. C. Nayak, D. O. DHI 3. Shri K.S. Sodhi, Asst. Director MSME 4. Shri Shaish Kumar, (Tech-1) Consultant 5. Shri V.C. Agarwal, (Tech-3) Consultant 6. Shri K.V. Tirumala, Deputy DGFT DGFT 7. Shri Pranav Upadhyay, Asst. Director (ISS) DGFT ----- End of picture text -----

Note:

In certain cases the decision of the Norms Committee refers to the Recommendations/ Observations/Deficiencies received from the concerned Technical Authority. Wherever applicable, a scanned copy of such document has been placed at the end of the Minutes, in running serial orders. The scanned copies uploaded are to be accepted. The U.O. No./O.M No of the scanned copy is reflected in the minutes.
Wherever the Committee has fixed norms, the RAs should allow inputs as per wastage norms approved or as applied whichever is less.
All applications/representations/reply to the Deficiency letters etc. may be sent to NC-I at e-mail address- nc1.dgft@nic.in. All firms are also requested to mail/send their present valid email addresses so that correspondences can be made through email/ by Post.
For all the Manual cases, the concerned RA should check the composition fees paid by the firm.
Minutes of Meeting 11/20 dated 25.09.2019 was circulated on 11.10.2019, to all the members of the Committee and the comments, there upon received, were incorporated in the Minutes. Hence, the said minutes were unanimously approved and uploaded on dgft.gov.in on 16.10.2019.

1 | P a g e

MEETING NUMBER: 13/80-ALC2/2019 MEETING DATE: 23.10.2019

==> picture [432 x 193] intentionally omitted <==

----- Start of picture text ----- Case No.:8/9/80- Party Name: WONJIN Meet No/Date:13/80- Status: ALC2/2019 AUTOPARTS INDIA PVT ALC2/2019 LTD 23.10.2019 HQ File RLA File Lic.No/Date:0410144145 Deferred :01/80/050/00133/AM20/ :04/24/040/00271/AM13/ 13.03.2013 Decision: The Committee considered the case as per agenda. The representative of MSME informed that the firm’s reply dated 21.10.2019 is deficient due to the following reason: 1 1. Per unit weight of export product is not provided. 2. Blank size is not provided. Therefore, the Committee decided to ask from the firm to furnish the reply for above mentioned deficiencies. The case stands deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:345/15/80- Party Name: SARA SAE Meet No/Date:13/80- Status: ALC2/2018 PRIVATE LIMITED ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:6110001290 Deferred :01/80/050/00687/AM19/ :61/24/040/00008/AM16/ 01.06.2015 2 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:70/15/80- Party Name: BHARAT Meet No/Date:13/80- Status: ALC2/2018 HEAVY ELECTRICALS ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710108519 Deferred :01/80/050/00412/AM19/ :07/24/040/00095/AM16/ 15.07.2015 3 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MeitY on 18.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:363/15/80- Party Name: PROMAC Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING ALC2/2019 INDUSTRIES LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710108812 Deferred 4 :01/80/050/00705/AM19/ :07/24/040/00184/AM16/ 05.10.2015 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per written comments of DHI vide F. No. 5/3/2019-HE & MT dated 11.10.2019 : ----- End of picture text -----

2 | P a g e

To provide the technical details/write-ups of hole punching procedure on steel cord belt including details of machines required for punching, hole sizes, wastages occurred and claimed.
To provide calculation sheet for obtaining value addition.

Case is deferred.

==> picture [432 x 193] intentionally omitted <==

----- Start of picture text ----- Case No.:364/15/80- Party Name: PROMAC Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING ALC2/2019 INDUSTRIES LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710108813 Deferred :01/80/050/00706/AM19/ :07/24/040/00185/AM16/ 05.10.2015 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per written comments of DHI vide F. No. 5/2/2019-HE & MT 5 dated 11.10.2019 : 1. To provide the technical specification, schematic diagram showing the use of imported items and end use of Rotary Dampers and Dispersion Box proposed to be exported. 2. To provide technical write-up with specification and the procedure for making value addition in respect of imported items. Case is deferred. ----- End of picture text -----

Case No.:11/15/80-	Party Name: DYNAMATIC	Meet No/Date:13/80-	Status:
ALC2/2018	TECHNOLOGIES	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00353/AM19/	RLA File<br>:07/24/040/00004/AM17/	Lic.No/Date:0710109710<br>26.04.2016	Deferred

6 Decision: The Committee considered the case as per the agenda and noted that RA, Bangalore was requested on 07.05.2019 for the hard copy of application but it has not been received yet. Therefore, the Committee decided to request again from RA, Bangalore and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

==> picture [432 x 121] intentionally omitted <==

----- Start of picture text ----- Case No.:19/15/80- Party Name: AYYAPPA Meet No/Date:13/80- Status: ALC2/2018 CNC PVT.LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710109807 Approved 7 :01/80/050/00361/AM19/ :07/24/040/00045/AM17/ 12.05.2016 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments given by MSME. (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

3 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:24/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710109871 Deferred :01/80/050/00366/AM19/ :07/24/040/00038/AM17/ 26.05.2016 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 8 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

Case No.:12/1/80-	Party Name: INTERPUMP	Meet No/Date:13/80-	Status:
ALC2/2019	HYDRAULICS INDIA	ALC2/2019
	PVT. LTD.	23.10.2019
HQ File<br>:01/80/050/00760/AM19/	RLA File<br>:04/24/040/00093/AM17/	Lic.No/Date:0410162268<br>09.09.2016	Deferred

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 216] intentionally omitted <==

----- Start of picture text ----- Case No.:386/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710110861 Deferred :01/80/050/00728/AM19/ :07/24/040/00292/AM17/ 28.12.2016 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may 10 also be furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components ----- End of picture text -----

4 | P a g e

to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

Case No.:402/15/80-	Party Name: SHIV	Meet No/Date:13/80-	Status:
ALC2/2018	HYDROMET	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00744/AM19/	RLA File<br>:24/24/040/00034/AM17/	Lic.No/Date:2410042158<br>14.03.2017	Deferred

11 Decision: The Committee considered the case as per the agenda and noted that the firm was called for Personal Hearing. On firm’s request to postpone the same, the Committee decided to call the firm for personal hearing to explain the case before Norms Committee in the forthcoming NC meeting.

Case is deferred.

==> picture [432 x 419] intentionally omitted <==

----- Start of picture text ----- Case No.:11/3/80- Party Name: MINDA SILCA Meet No/Date:13/80- Status: ALC2/2017 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0510402001 Approved :01/80/050/00011/AM18/ :05/24/040/00634/AM17/ 20.03.2017 Decision: The Committee considered the case as per the agenda and decided to ratify the ad-hoc norms as per written comments given by MSME as under: Export items: 1. Per unit weight of export item at Sl. No. 1 is 8.40 gram. 2. Per unit weight of export item at Sl. No. 2 is 8.05 gram. 3. Per unit weight of export item at Sl. No. 3 is 9.10 gram. 4. Per unit weight of export item at Sl. No. 4 is 9.50 gram. 5. Per unit weight of export item at Sl. No. 5 is 9.60 gram. 6. Per unit weight of export item at Sl. No. 6 is 9.43 gram. 7. Per unit weight of export item at Sl. No. 7 is 14.28 gram. (with 8.88 gram steel) 8. Per unit weight of export item at Sl. No. 8 is 15.50 gram. (with 12.72 gram steel) 12 9. Per unit weight of export item at Sl. No. 9 is 10.96 gram. (with 6.96 gram steel) 10. Per unit weight of export item at Sl. No. 10 is 10.95 gram. (with 6.95 gram steel) 11. Per unit weight of export item at Sl. No. 11 is 16.40 gram. (with 10.62 gram steel) 12. Per unit weight of export item at Sl. No. 12 is 10.34 gram. (with 6.34 gram steel) 13. Per unit weight of export item at Sl. No. 13 is 12.00 gram. (with 7.42 gram steel) 14. Per unit weight of export item at Sl. No. 14 is 10.50 gram. (with 4.38 gram steel) 15. Per unit weight of export item at Sl. No. 15 is 12.90 gram. (with 6.99 gram steel) 16. Per unit weight of export item at Sl. No. 16 is 7.10 gram. (with 5.00 gram steel) 17. Per unit weight of export item at Sl. No. 17 is 14.20 gram. (with 7.22 gram steel) 18. Per unit weight of export item at Sl. No. 18 is 11.20 gram. (with 6.20 gram steel) 19. Per unit weight of export item at Sl. No. 19 is 10.50 gram. (with 8.83 gram steel) 20. Per unit weight of export item at Sl. No. 20 is 14.00 gram. (with 11.64 gram steel) Import Item: 1. The quantity of relevant import item may be allowed as 125794 Kg after 1/3 [rd] recovery inclusive of 65% wastage. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

5 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:398/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710111555 Deferred :01/80/050/00740/AM19/ :07/24/040/00395/AM17/ 08.05.2017 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 13 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:91/15/80- Party Name: AYYAPPA Meet No/Date:13/80- Status: ALC2/2018 CNC PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710111569 Approved 14 :01/80/050/00433/AM19/ :07/24/040/00043/AM18/ 09.05.2017 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments given by MSME. (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

Case No.:11/19/80-	Party Name: VEM	Meet No/Date:13/80-	Status:
ALC2/2017	TECHNOLOGIES PVT	ALC2/2019
	LTD.	23.10.2019
HQ File<br>:01/80/050/00292/AM18/	RLA File<br>:09/24/040/00054/AM18/	Lic.No/Date:0910065039<br>15.05.2017	Deferred

15 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 15.07.2019 followed by an I.D. reminder on 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

6 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:4/8/80- Party Name: THE INDURE Meet No/Date:13/80- Status: ALC2/2017 PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0510402573 Deferred :01/80/050/00148/AM18/ :05/24/040/00005/AM18/ 16.05.2017 16 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 17.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:1/11/80- Party Name: DIAMOND Meet No/Date:13/80- Status: ALC2/2018 METAL SCREENS (P) LTD ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:6510000003 Deferred :01/80/050/00192/AM19/ :65/24/040/00003/AM18/ 17.05.2017 17 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 275] intentionally omitted <==

----- Start of picture text ----- Case No.:132/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710111628 Deferred :01/80/050/00474/AM19/ :07/24/040/00034/AM18/ 19.05.2017 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 18 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

7 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:400/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710111634 Deferred :01/80/050/00742/AM19/ :07/24/040/00394/AM17/ 22.05.2017 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 19 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:80/11/80- Party Name: MACAWBER Meet No/Date:13/80- Status: ALC2/2018 BEEKAY PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0510403845 Deferred :01/80/050/00271/AM19/ :05/24/040/00230/AM18/ 29.08.2017 20 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. To provide a copy of Annexure-A. 2. Manufacturing process with stage-wise wastage. Case is deferred. ----- End of picture text -----

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:188/15/80- Party Name: AYYAPPA Meet No/Date:13/80- Status: ALC2/2018 CNC PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710112073 Approved 21 :01/80/050/00530/AM19/ :07/24/040/00156/AM18/ 31.08.2017 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments given by MSME. (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

8 | P a g e

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:18/19/80- Party Name: KINECO Meet No/Date:13/80- Status: ALC2/2017 KAMAN COMPOSITES - ALC2/2019 INDIA PVT LTD 23.10.2019 HQ File RLA File Lic.No/Date:1710006668 Deferred 22 :01/80/050/00299/AM18/ :17/24/040/00050/AM18/ 10.10.2017 Decision: The Committee considered the case as per the agenda and decided to refer the case to DPIIT for examination/comments as per advice of representative of MSME. Case is deferred. ----- End of picture text -----

==> picture [432 x 173] intentionally omitted <==

----- Start of picture text ----- Case No.:30/11/80- Party Name: AKSHAR Meet No/Date:13/80- Status: ALC2/2018 PRECISION TUBES ALC2/2019 PVT.LTD. 23.10.2019 HQ File RLA File Lic.No/Date:3410043530 Approved :01/80/050/00221/AM19/ :34/24/040/00179/AM18/ 10.10.2017 23 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments of MSME as under: Relevant item of import of Sl. No. 1 to 6 may be allowed on net to net basis with Nil wastage. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:36/19/80- Party Name: ASHOKA Meet No/Date:13/80- Status: ALC2/2017 MANUFACTURING LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0210207941 Deferred :01/80/050/00317/AM18/ :02/24/040/00120/AM18/ 03.11.2017 24 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:237/15/80- Party Name: AYYAPPA Meet No/Date:13/80- Status: ALC2/2018 CNC PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710112397 Approved 25 :01/80/050/00579/AM19/ :07/24/040/00223/AM18/ 10.11.2017 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments given by MSME. (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

9 | P a g e

Case No.:26/20/80-	Party Name: ICEM	Meet No/Date:13/80-	Status:
ALC2/2017	ENGINEERING COMPANY	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00390/AM18/	RLA File<br>:03/94/040/00742/AM18/	Lic.No/Date:0310817800<br>15.12.2017	Deferred

26 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:20/20/80- Party Name: BIRLA Meet No/Date:13/80- Status: ALC2/2017 PRECISION ALC2/2019 TECHNOLOGIES LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0310818218 Deferred :01/80/050/00384/AM18/ :03/94/040/00782/AM18/ 04.01.2018 27 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per advice of MSME: 1. To provide per unit weight of each export product. 2. To provide blank size/specification. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:23/20/80- Party Name: BIRLA Meet No/Date:13/80- Status: ALC2/2017 PRECISION ALC2/2019 TECHNOLOGIES LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0310818219 Deferred :01/80/050/00387/AM18/ :03/94/040/00784/AM18/ 04.01.2018 28 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per advice of MSME: 1. To provide per unit weight of each export product. 2. To provide blank size/specification. Case is deferred. ----- End of picture text -----

Case No.:21/20/80-	Party Name: BIRLA	Meet No/Date:13/80-	Status:
ALC2/2017	PRECISION	ALC2/2019
	TECHNOLOGIES LTD.	23.10.2019
HQ File<br>:01/80/050/00385/AM18/	RLA File<br>:03/94/040/00785/AM18/	Lic.No/Date:0310818275<br>05.01.2018	Deferred

29 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per advice of MSME:

To provide per unit weight of each export product. 2. To provide blank size/specification.

10 | P a g e

==> picture [432 x 187] intentionally omitted <==

----- Start of picture text ----- Case is deferred. Case No.:22/20/80- Party Name: BIRLA Meet No/Date:13/80- Status: ALC2/2017 PRECISION ALC2/2019 TECHNOLOGIES LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0310818273 Deferred :01/80/050/00386/AM18/ :03/94/040/00783/AM18/ 05.01.2018 30 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per advice of MSME: 1. To provide per unit weight of each export product. 2. To provide blank size/specification. Case is deferred. ----- End of picture text -----

Case No.:20/1/80-	Party Name: ZTT INDIA	Meet No/Date:13/80-	Status:
ALC2/2019	PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00768/AM19/	RLA File<br>:04/24/040/00212/AM18/	Lic.No/Date:0410163956<br>07.02.2018	Deferred

31 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MeitY on 04.09.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.

Case is deferred.

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:392/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710112968 Deferred :01/80/050/00734/AM19/ :07/24/040/00336/AM18/ 13.03.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 32 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

11 | P a g e

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:393/15/80- Party Name: SARTORIUS Meet No/Date:13/80- Status: ALC2/2018 STEDIM INDIA PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710113010 Deferred :01/80/050/00735/AM19/ :07/24/040/00348/AM18/ 23.03.2018 33 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 06.08.2019 followed by an I.D. reminder on 17.10.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:118/15/80-	Party Name: LMT TOOLS	Meet No/Date:13/80-	Status:
ALC2/2018	INDIA PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00460/AM19/	RLA File<br>:31/83/040/00001/AM19/	Lic.No/Date:3110067025<br>06.04.2018	Deferred

34 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:10/1/80-	Party Name: MAGNA	Meet No/Date:13/80-	Status:
ALC2/2019	AUTOMOTIVE INDIA	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00758/AM19/	RLA File<br>:04/24/040/00001/AM19/	Lic.No/Date:0410164172<br>06.04.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 06.08.2019 followed by an I.D. reminder on 17.10.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:40/8/80-	Party Name: SARA SAE	Meet No/Date:13/80-	Status:
ALC2/2018	PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00163/AM19/	RLA File<br>:61/24/040/00001/AM19/	Lic.No/Date:6110001499<br>16.04.2018	Deferred

36 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 06.05.2019 followed by reminders on 05.07.2019 & 17.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

12 | P a g e

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:6/8/80- Party Name: L & T-MHPS Meet No/Date:13/80- Status: ALC2/2018 TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0310820724 Deferred :01/80/050/00129/AM19/ :03/95/040/01112/AM18/ 27.04.2018 37 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 335] intentionally omitted <==

----- Start of picture text ----- Case No.:46/5/80- Party Name: S AND P Meet No/Date:13/80- Status: ALC2/2018 ENTERPRISES ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0410164303 Approved :01/80/050/00095/AM19/ :04/24/040/00027/AM19/ 07.05.2018 Decision: The Committee considered the case as per the agenda and decided to ratify the ad-hoc norms as per written comments given by MSME as under: Export items: 1. Per unit weight of export item at Sl. No. 1 is 15.20 gram. 2. Per unit weight of export item at Sl. No. 2 is 23.70 gram. 3. Per unit weight of export item at Sl. No. 3 is 32.80 gram. 4. Per unit weight of export item at Sl. No. 4 is 18.90 gram. 5. Per unit weight of export item at Sl. No. 5 is 29.60 gram. 38 6. Per unit weight of export item at Sl. No. 6 is 20.00 gram. 7. Per unit weight of export item at Sl. No. 7 is 28.00 gram. 8. Per unit weight of export item at Sl. No. 8 is 20.00 gram. 9. Per unit weight of export item at Sl. No. 9is 20.00 gram. 10. Per unit weight of export item at Sl. No. 10 is 32.00 gram. 11. Per unit weight of export item at Sl. No. 11 is 47.00 gram. 12. Per unit weight of export item at Sl. No. 12 is 97.00 gram. Import Item: 1. The quantity of relevant import item at Sl. No. 1 may be allowed as 200 Kg. 2. The quantity of relevant import item at Sl. No. 2 may be allowed as 670 Kg. 3. The quantity of relevant import item at Sl. No. 3 may be allowed as 842 Kg. RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

==> picture [432 x 121] intentionally omitted <==

----- Start of picture text ----- Case No.:127/15/80- Party Name: AYYAPPA Meet No/Date:13/80- Status: ALC2/2018 CNC PVT.LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0710113266 Approved 39 :01/80/050/00469/AM19/ :07/24/040/00020/AM19/ 10.05.2018 Decision: The Committee considered the case as per the agenda and decided to ratify the norms as per written comments given by MSME. (Copy enclosed) RA concerned may take further necessary action as per the decision of NC. ----- End of picture text -----

13 | P a g e

==> picture [432 x 193] intentionally omitted <==

----- Start of picture text ----- Case No.:397/15/80- Party Name: PROMAC Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING ALC2/2019 INDUSTRIES LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113276 Deferred :01/80/050/00739/AM19/ :07/24/040/00357/AM18/ 14.05.2018 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per written comments of DHI vide F. No. 5/1/2019-HE & MT 40 dated 11.10.2019 : 1. To provide the technical details/write-ups of hole punching procedure on steel cord belt including details of machines required for punching, hole sizes, wastages occurred and claimed. 2. To provide calculation sheet for obtaining value addition. Case is deferred. ----- End of picture text -----

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:45/11/80- Party Name: JAMES Meet No/Date:13/80- Status: ALC2/2018 ROBINSON LABS PVT. ALC2/2019 LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0910066251 Deferred :01/80/050/00236/AM19/ :09/24/040/00035/AM19/ 21.05.2018 41 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on 06.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 68] intentionally omitted <==

----- Start of picture text ----- Case No.:128/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113340 Deferred :01/80/050/00470/AM19/ :07/24/040/00034/AM19/ 28.05.2018 ----- End of picture text -----

Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME:

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
Weight of each Export Product.

42 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
1. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

14 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:129/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113346 Deferred :01/80/050/00471/AM19/ :07/24/040/00033/AM19/ 28.05.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 43 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:130/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113344 Deferred :01/80/050/00472/AM19/ :07/24/040/00040/AM19/ 28.05.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 44 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

15 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:131/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113347 Deferred :01/80/050/00473/AM19/ :07/24/040/00032/AM19/ 28.05.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 45 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:166/15/80- Party Name: BHARAT Meet No/Date:13/80- Status: ALC2/2018 HEAVY ELECTRICALS ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910066472 Deferred :01/80/050/00508/AM19/ :09/24/040/00171/AM19/ 18.07.2018 46 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 22.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:76/11/80-	Party Name: HIMACHAL	Meet No/Date:13/80-	Status:
ALC2/2018	FUTURISTIC	ALC2/2019
	COMMUNICATIONS LTD	23.10.2019
HQ File<br>:01/80/050/00267/AM19/	RLA File<br>:05/23/040/00215/AM19/	Lic.No/Date:0510407445<br>06.08.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MeitY on 15.07.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.

Case is deferred.

16 | P a g e

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:19/11/80- Party Name: ICEM Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING ALC2/2019 COMPANY PRIVATE 23.10.2019 LIMITED HQ File RLA File Lic.No/Date:0310822939 Deferred :01/80/050/00210/AM19/ :03/94/040/00306/AM19/ 09.08.2018 48 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:179/15/80- Party Name: PROMAC Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING ALC2/2019 INDUSTRIES LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113710 Deferred :01/80/050/00521/AM19/ :07/24/040/00102/AM19/ 13.08.2018 49 Decision: The Committee considered the case as per agenda and noted that the representative of DHI required detailed calculation sheet indicating how to achieve the value addition of 95.82%. However the committee felt that the NC requires to fix the wastage norms and not to see the calculation of value addition. Hence the committee requested to DHI to give the comments on the wastage norms. Case is deferred. ----- End of picture text -----

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:182/15/80- Party Name: Meet No/Date:13/80- Status: ALC2/2018 INJECTOPLAST PVT.LTD ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0610038953 Deferred :01/80/050/00524/AM19/ :06/24/040/00023/AM19/ 20.08.2018 50 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to Consultant (Tech-1) on 11.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [432 x 121] intentionally omitted <==

----- Start of picture text ----- Case No.:34/1/80- Party Name: KINECO Meet No/Date:13/80- Status: ALC2/2019 KAMAN COMPOSITES - ALC2/2019 INDIA PVT LTD 23.10.2019 HQ File RLA File Lic.No/Date:1710006716 Deferred 51 :01/80/050/00782/AM19/ :17/24/040/00017/AM19/ 20.08.2018 Decision: The Committee considered the case as per the agenda and decided to refer the case to DPIIT for examination/comments as per advice of representative of MSME. Case is deferred. ----- End of picture text -----

17 | P a g e

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:25/11/80- Party Name: LARSEN & Meet No/Date:13/80- Status: ALC2/2018 TOUBRO LIMITED ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310823360 Deferred :01/80/050/00216/AM19/ :03/95/040/00056/AM19/ 28.08.2018 52 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 06.05.2019 and final reminder on 08.07.2019. The firm vide letter dated 13.07.2019 requested for extension of time by 90 days to furnish the requisite information. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

Case No.:23/11/80-	Party Name: JAYESH	Meet No/Date:13/80-	Status:
ALC2/2018	METALS AND FERRO	ALC2/2019
	ALLOYS LLP	23.10.2019
HQ File<br>:01/80/050/00214/AM19/	RLA File<br>:03/94/040/00488/AM19/	Lic.No/Date:0310823416<br>29.08.2018	Deferred

53 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MSME for examination of the case on 23.07.2019 followed by an I.D. reminder on 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:28/11/80-	Party Name: L & T-MHPS	Meet No/Date:13/80-	Status:
ALC2/2018	TURBINE GENERATORS	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00219/AM19/	RLA File<br>:03/95/040/00466/AM19/	Lic.No/Date:0310823400<br>29.08.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 22.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:65/11/80-	Party Name: PLANSEE INDIA	Meet No/Date:13/80-	Status:
ALC2/2018	HIGH PERFORMANCE	ALC2/2019
	MATERIALS PVT. LTD.	23.10.2019
HQ File<br>:01/80/050/00256/AM19/	RLA File<br>:07/24/040/00094/AM19/	Lic.No/Date:0710113822<br>06.09.2018	Deferred

55 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 08.07.2019 followed by final reminder on 17.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

18 | P a g e

Case No.:9/1/80-	Party Name: L & T-MHPS	Meet No/Date:13/80-	Status:
ALC2/2019	TURBINE GENERATORS	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00757/AM19/	RLA File<br>:03/95/040/00469/AM19/	Lic.No/Date:0310823645<br>07.09.2018	Deferred

Case is deferred.

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:200/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113846 Deferred :01/80/050/00542/AM19/ :07/24/040/00137/AM19/ 14.09.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 57 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 216] intentionally omitted <==

----- Start of picture text ----- Case No.:201/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710113852 Deferred :01/80/050/00543/AM19/ :07/24/040/00155/AM19/ 17.09.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may 58 also be furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components ----- End of picture text -----

19 | P a g e

to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

Case No.:22/11/80-	Party Name: CROWN	Meet No/Date:13/80-	Status:
ALC2/2018	CLOSURES PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00213/AM19/	RLA File<br>:03/94/040/00561/AM19/	Lic.No/Date:0310823992<br>26.09.2018	Deferred

59 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 06.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:57/11/80- Party Name: GL&V INDIA Meet No/Date:13/80- Status: ALC2/2018 PRIVATE LIMITED ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:3110067179 Deferred :01/80/050/00248/AM19/ :31/83/040/00096/AM19/ 26.09.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 60 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 122] intentionally omitted <==

----- Start of picture text ----- Case No.:82/11/80- Party Name: ANSTECH Meet No/Date:13/80- Status: ALC2/2018 ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:3410044543 Deferred 61 :01/80/050/00273/AM19/ :34/24/040/00218/AM19/ 04.10.2018 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Vadodara & the firm and in this regard a letter was sent to RA, Vadodara and the firm on 08.07.2019 followed by reminders on 25.09.2019 & 18.10.2019. However, no information has been received so far. Hence, the Committee decided to ----- End of picture text -----

20 | P a g e

wait for the complete set of application.

Case is deferred.

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:243/15/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910066798 Deferred :01/80/050/00585/AM19/ :09/24/040/00328/AM19/ 02.11.2018 62 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

Case No.:244/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00586/AM19/	RLA File<br>:09/24/040/00327/AM19/	Lic.No/Date:0910066799<br>02.11.2018	Deferred

63 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:245/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00587/AM19/	RLA File<br>:09/24/040/00325/AM19/	Lic.No/Date:0910066800<br>02.11.2018	Deferred

64 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 121] intentionally omitted <==

----- Start of picture text ----- Case No.:246/15/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2018 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910066801 Deferred 65 :01/80/050/00588/AM19/ :09/24/040/00314/AM19/ 02.11.2018 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. ----- End of picture text -----

21 | P a g e

Case is deferred.

Case No.:247/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00589/AM19/	RLA File<br>:09/24/040/00324/AM19/	Lic.No/Date:0910066802<br>02.11.2018	Deferred

66 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 08.07.2019 followed by reminder on 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:248/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00590/AM19/	RLA File<br>:09/24/040/00326/AM19/	Lic.No/Date:0910066803<br>02.11.2018	Deferred

67 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:249/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00591/AM19/	RLA File<br>:09/24/040/00329/AM19/	Lic.No/Date:0910066804<br>02.11.2018	Deferred

68 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 08.07.2019 followed by reminder on 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:250/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00592/AM19/	RLA File<br>:09/24/040/00312/AM19/	Lic.No/Date:0910066805<br>02.11.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

22 | P a g e

Case is deferred.

Case No.:251/15/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00593/AM19/	RLA File<br>:09/24/040/00307/AM19/	Lic.No/Date:0910066806<br>02.11.2018	Deferred

70 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:253/15/80-	Party Name: BHARAT	Meet No/Date:13/80-	Status:
ALC2/2018	HEAVY ELECTRICALS	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00595/AM19/	RLA File<br>:09/24/040/00340/AM19/	Lic.No/Date:0910066870<br>16.11.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:5/13/80-	Party Name: SULZER	Meet No/Date:13/80-	Status:
ALC2/2018	INDIA PRIVATE	ALC2/2019
	LIMITED.	23.10.2019
HQ File<br>:01/80/050/00314/AM19/	RLA File<br>:31/83/040/00124/AM19/	Lic.No/Date:3110067242<br>22.11.2018	Deferred

72 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:6/13/80- Party Name: SULZER Meet No/Date:13/80- Status: ALC2/2018 INDIA PRIVATE ALC2/2019 LIMITED. 23.10.2019 HQ File RLA File Lic.No/Date:3110067241 Deferred :01/80/050/00315/AM19/ :31/83/040/00123/AM19/ 22.11.2018 73 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

23 | P a g e

==> picture [432 x 276] intentionally omitted <==

----- Start of picture text ----- Case No.:259/15/80- Party Name: DYNAMATIC Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710114156 Deferred :01/80/050/00601/AM19/ :07/24/040/00182/AM19/ 22.11.2018 Decision: The Committee considered the case as per the agenda and decided to ask from the firm to furnish the following information as per advice of representative of MSME: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 74 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:265/15/80- Party Name: DEE Meet No/Date:13/80- Status: ALC2/2018 DEVELOPMENT ALC2/2019 ENGINEERS LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0510408837 Deferred :01/80/050/00607/AM19/ :05/23/040/00361/AM19/ 10.12.2018 75 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

Case No.:31/1/80-	Party Name: SULZER	Meet No/Date:13/80-	Status:
ALC2/2019	INDIA PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00779/AM19/	RLA File<br>:31/83/040/00139/AM19/	Lic.No/Date:3110067252<br>12.12.2018	Deferred

76 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

24 | P a g e

Case No.:32/1/80-	Party Name: SULZER	Meet No/Date:13/80-	Status:
ALC2/2019	INDIA PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00780/AM19/	RLA File<br>:31/83/040/00140/AM19/	Lic.No/Date:3110067253<br>12.12.2018	Deferred

77 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:272/15/80-	Party Name: ICEM	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERING COMPANY	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00614/AM19/	RLA File<br>:03/94/040/00785/AM19/	Lic.No/Date:0310825670<br>14.12.2018	Deferred

78 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 28.05.2019 followed by reminders on 05.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:273/15/80-	Party Name: LMT TOOLS	Meet No/Date:13/80-	Status:
ALC2/2018	INDIA PRIVATE LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00615/AM19/	RLA File<br>:31/83/040/00144/AM19/	Lic.No/Date:3110067254<br>17.12.2018	Deferred

79 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 21.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:17/1/80-	Party Name: MUDHRA	Meet No/Date:13/80-	Status:
ALC2/2019	FINE BLANC PRIVATE	ALC2/2019
	LTD	23.10.2019
HQ File<br>:01/80/050/00765/AM19/	RLA File<br>:04/24/040/00207/AM19/	Lic.No/Date:0410164995<br>17.12.2018	Deferred

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 18.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

25 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:274/15/80- Party Name: STERLITE Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310825720 Deferred :01/80/050/00616/AM19/ :03/95/040/00812/AM19/ 18.12.2018 81 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MeitY on 04.09.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:275/15/80- Party Name: STERLITE Meet No/Date:13/80- Status: ALC2/2018 TECHNOLOGIES LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310825721 Deferred :01/80/050/00617/AM19/ :03/95/040/00815/AM19/ 18.12.2018 82 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MeitY on 03.06.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments. Case is deferred. ----- End of picture text -----

Case No.:279/15/80-	Party Name: SUPER	Meet No/Date:13/80-	Status:
ALC2/2018	CIRCLE AUTO LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00621/AM19/	RLA File<br>:05/24/040/00506/AM19/	Lic.No/Date:0510409020<br>20.12.2018	Deferred

83 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on 30.05.2019 followed by reminders on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:280/15/80- Party Name: VICTORA Meet No/Date:13/80- Status: ALC2/2018 AUTO PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0510409056 Deferred :01/80/050/00622/AM19/ :05/24/040/00529/AM19/ 26.12.2018 84 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 29.05.2019 followed by reminder on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

26 | P a g e

Case No.:281/15/80-	Party Name: VICTORA	Meet No/Date:13/80-	Status:
ALC2/2018	AUTO PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00623/AM19/	RLA File<br>:05/24/040/00530/AM19/	Lic.No/Date:0510409057<br>26.12.2018	Deferred

85 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by MSME was sent to the firm on 29.05.2019 followed by reminder on 08.07.2019 & 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:40/11/80-	Party Name: CONSITE	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING	ALC2/2019
	COMPANY LIMITED	23.10.2019
HQ File<br>:01/80/050/00166/AM20/	RLA File<br>:03/94/040/00835/AM19/	Lic.No/Date:0310826129<br>03.01.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that the firm’s reply has been sent to DPIIT on 23.10.2019 for examination of the case. Therefore, the Committee decided to wait for the comments.

Case is deferred.

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:293/15/80- Party Name: STERLITE Meet No/Date:13/80- Status: ALC2/2018 POWER TRANSMISSION ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0310826313 Deferred :01/80/050/00635/AM19/ :03/95/040/00869/AM19/ 10.01.2019 87 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was received by MeitY on 18.06.2019. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments. Case is deferred. ----- End of picture text -----

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:21/1/80- Party Name: MUDHRA Meet No/Date:13/80- Status: ALC2/2019 FINE BLANC PRIVATE ALC2/2019 LTD 23.10.2019 HQ File RLA File Lic.No/Date:0410165082 Deferred :01/80/050/00769/AM19/ :04/24/040/00222/AM19/ 11.01.2019 88 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 29.05.2019 followed by a 08.07.2019. However, no comments have been received yet. Hence, the Committee decided to remind again MSME for expediting the comments. Case is deferred. ----- End of picture text -----

27 | P a g e

Case No.:298/15/80-	Party Name: ULTRA	Meet No/Date:13/80-	Status:
ALC2/2018	ENGINEERS	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00640/AM19/	RLA File<br>:31/83/040/00164/AM19/	Lic.No/Date:3110067288<br>16.01.2019	Deferred

89 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 16.07.2019 followed by reminder on 17.09.2019, for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:23/1/80-	Party Name: PARKER	Meet No/Date:13/80-	Status:
ALC2/2019	HANNIFIN INDIA PVT.	ALC2/2019
	LTD.	23.10.2019
HQ File<br>:01/80/050/00771/AM19/	RLA File<br>:04/24/040/00223/AM19/	Lic.No/Date:0410165142<br>28.01.2019	Deferred

90 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 30.07.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to remind MSME for expediting the comments.

Case is deferred.

Case No.:25/1/80-	Party Name: MUDHRA	Meet No/Date:13/80-	Status:
ALC2/2019	FINE BLANC PRIVATE	ALC2/2019
	LTD	23.10.2019
HQ File<br>:01/80/050/00773/AM19/	RLA File<br>:04/24/040/00241/AM19/	Lic.No/Date:0410165210<br>13.02.2019	Deferred

91 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 11.07.2019 followed by an I.D. reminder on 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:330/15/80-	Party Name: AUTO COMP	Meet No/Date:13/80-	Status:
ALC2/2018	INDIA PVT. LTD	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00672/AM19/	RLA File<br>:31/83/040/00173/AM19/	Lic.No/Date:3110067323<br>19.02.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that the case has not yet been referred to MSME as decided in M. No. 11/80-ALC2/2019 dated 25.09.2019. Therefore, the Committee directed to forward the case to MSME immediately.

Case is deferred.

28 | P a g e

Case No.:26/1/80-	Party Name: MUDHRA	Meet No/Date:13/80-	Status:
ALC2/2019	FINE BLANC PRIVATE	ALC2/2019
	LTD	23.10.2019
HQ File<br>:01/80/050/00774/AM19/	RLA File<br>:04/24/040/00242/AM19/	Lic.No/Date:0410165228<br>19.02.2019	Deferred

93 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 10.07.2019 followed by an I.D. reminder on 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:29/1/80-	Party Name: AUTO TECH	Meet No/Date:13/80-	Status:
ALC2/2019	INDUSTRIES INDIA PVT	ALC2/2019
	LTD	23.10.2019
HQ File<br>:01/80/050/00777/AM19/	RLA File<br>:04/24/040/00257/AM19/	Lic.No/Date:0410165239<br>21.02.2019	Deferred

94 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 11.07.2019 followed by an I.D. reminder on 17.10.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:38/1/80-	Party Name: VICTORA	Meet No/Date:13/80-	Status:
ALC2/2019	AUTO PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00786/AM19/	RLA File<br>:05/24/040/00681/AM19/	Lic.No/Date:0510409856<br>06.03.2019	Deferred

95 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MSME for examination of the case on 08.08.2019 followed by an I.D. reminder on 17.10.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:41/1/80-	Party Name: VICTORA	Meet No/Date:13/80-	Status:
ALC2/2019	AUTO PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00789/AM19/	RLA File<br>:05/24/040/00705/AM19/	Lic.No/Date:0510409909<br>12.03.2019	Deferred

96 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MSME for examination of the case on 02.07.2019 followed by a reminder on 06.08.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

29 | P a g e

Case No.:42/1/80-	Party Name: LARSEN &	Meet No/Date:13/80-	Status:
ALC2/2019	TOUBRO LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00790/AM19/	RLA File<br>:03/95/040/01295/AM19/	Lic.No/Date:0310827622<br>12.03.2019	Deferred

97 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 06.08.2019 followed by a reminder on 17.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:49/1/80-	Party Name: DIAMOND	Meet No/Date:13/80-	Status:
ALC2/2019	METAL SCREENS (P) LTD	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00797/AM19/	RLA File<br>:65/24/040/00007/AM19/	Lic.No/Date:6510000026<br>14.03.2019	Deferred

98 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 16.05.2019 followed by reminders on 08.07.2019 & 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:46/1/80-	Party Name: ISGEC TITAN	Meet No/Date:13/80-	Status:
ALC2/2019	METAL FABRICATORS	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00794/AM19/	RLA File<br>:05/23/040/00557/AM19/	Lic.No/Date:0510409960<br>15.03.2019	Deferred

99 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 29.05.2019 followed by a reminder on 06.08.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:47/1/80-	Party Name: VICTORA	Meet No/Date:13/80-	Status:
ALC2/2019	AUTO PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00795/AM19/	RLA File<br>:05/24/040/00712/AM19/	Lic.No/Date:0510409964<br>18.03.2019	Deferred

100 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to MSME on 06.08.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MSME for expediting the comments.

Case is deferred.

30 | P a g e

Case No.:7/2/80-	Party Name: AYYAPPA	Meet No/Date:13/80-	Status:
ALC2/2019	CNC PVT LTD	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00800/AM19/	RLA File<br>:07/24/040/00299/AM19/	Lic.No/Date:0710114686<br>20.03.2019	Deferred

101 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 04.06.2019 followed by a reminder on 06.08.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [432 x 287] intentionally omitted <==

----- Start of picture text ----- Case No.:18/5/80- Party Name: MAINI Meet No/Date:13/80- Status: ALC2/2019 PRECISION PRODUCTS ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0710114732 Deferred :01/80/050/00056/AM20/ :07/24/040/00306/AM19/ 29.03.2019 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 16.09.2019 for examination of the case. However, the representative of DHI informed that the firm’s reply is deficient and not clear.Therefore, the Committee decided to ask again from the firm to furnish following information as per the advice of representative of DHI: 1. List of export items with their quantity in weight & number. 102 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

==> picture [432 x 146] intentionally omitted <==

----- Start of picture text ----- Case No.:5/2/80- Party Name: VIPRA Meet No/Date:13/80- Status: ALC2/2019 CLOSURES PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0310828134 Deferred :01/80/050/00005/AM20/ :03/95/040/01384/AM19/ 03.04.2019 103 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 04.06.2019 followed by a reminder on 06.08.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

31 | P a g e

Case No.:14/5/80-	Party Name: UNI VTL	Meet No/Date:13/80-	Status:
ALC2/2019	PRECISION PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00052/AM20/	RLA File<br>:65/24/040/00006/AM19/	Lic.No/Date:6510000027<br>05.04.2019	Deferred

104 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to Consultant (Tech-3) on 18.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:3/3/80-	Party Name: MUDHRA	Meet No/Date:13/80-	Status:
ALC2/2019	FINE BLANC PRIVATE	ALC2/2019
	LTD	23.10.2019
HQ File<br>:01/80/050/00009/AM20/	RLA File<br>:04/24/040/00294/AM19/	Lic.No/Date:0410165451<br>11.04.2019	Deferred

105 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 05.07.2019 followed by final reminder on 17.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Case No.:4/3/80-	Party Name: VEELINE	Meet No/Date:13/80-	Status:
ALC2/2019	MEDIA LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00010/AM20/	RLA File<br>:02/24/040/00003/AM20/	Lic.No/Date:0210209114<br>16.04.2019	Deferred

106 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 06.06.2019 followed by a reminder on 08.08.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [432 x 163] intentionally omitted <==

----- Start of picture text ----- Case No.:5/3/80- Party Name: SMC Meet No/Date:13/80- Status: ALC2/2019 CORPORATION (INDIA) ALC2/2019 PRIVATE LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0510410292 Deferred :01/80/050/00011/AM20/ :05/24/040/00020/AM20/ 18.04.2019 107 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-3) was sent to the firm on 06.08.2019. However, no reply has been received yet. Hence, the Committee decided to send final reminder to the firm to furnish the requisite information within 15 days failing which the case will be rejected. Case is deferred. ----- End of picture text -----

32 | P a g e

Case No.:6/3/80-	Party Name: TINITA	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING PVT.LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00012/AM20/	RLA File<br>:03/95/040/00030/AM20/	Lic.No/Date:0310828410<br>18.04.2019	Deferred

108 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 08.07.2019 followed by final reminder on 17.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:8/3/80- Party Name: L & T-MHPS Meet No/Date:13/80- Status: ALC2/2019 TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0310828481 Deferred :01/80/050/00014/AM20/ :03/95/040/01354/AM19/ 23.04.2019 109 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 06.08.2019. However, the firm vide letter dated 14.09.2019 informed that the Project Engineering & Detail Design is in progress and is expected to be complete by January 2020. Therefore, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

Case No.:9/3/80-	Party Name: RAYCHEM	Meet No/Date:13/80-	Status:
ALC2/2019	RPG PVT. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00015/AM20/	RLA File<br>:03/95/040/01371/AM19/	Lic.No/Date:0310828517<br>23.04.2019	Deferred

110 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 18.10.2019. However, the firm vide email dated 11.10.2019requested for extension of time to reply of deficiency letter. Therefore, the Committee decided to wait for the firm’s reply.

Case is deferred.

111

Case No.:8/5/80-	Party Name: GODREJ &	Meet No/Date:13/80-	Status:
ALC2/2019	BOYCE MFG. CO. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00046/AM20/	RLA File<br>:03/94/040/00093/AM20/	Lic.No/Date:0310828981<br>13.05.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DPIIT was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

33 | P a g e

==> picture [432 x 164] intentionally omitted <==

----- Start of picture text ----- Case No.:10/5/80- Party Name: I-TECH PLAST Meet No/Date:13/80- Status: ALC2/2019 INDIA PVT.LTD.(EOU) ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310828994 Deferred :01/80/050/00048/AM20/ :03/94/040/00088/AM20/ 14.05.2019 112 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by Consultant (Tech-1) was sent to the firm on 17.09.2019. However, no reply has been received yet. Hence, the Committee decided to send final reminder to the firm to furnish the requisite information within 15 days failing which the case will be rejected. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:5/5/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067528 Deferred :01/80/050/00043/AM20/ :09/24/040/00061/AM20/ 15.05.2019 113 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

114

Case No.:6/5/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00044/AM20/	RLA File<br>:09/24/040/00059/AM20/	Lic.No/Date:0910067529<br>15.05.2019	Deferred

Case is deferred.

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:7/5/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067530 Deferred :01/80/050/00045/AM20/ :09/24/040/00060/AM20/ 15.05.2019 115 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

34 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:1/5/80- Party Name: PAHARPUR Meet No/Date:13/80- Status: ALC2/2019 COOLING TOWERS ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0210209171 Deferred :01/80/050/00039/AM20/ :02/24/040/00012/AM20/ 16.05.2019 116 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DPIIT on 18.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:7/9/80-	Party Name: BAPL	Meet No/Date:13/80-	Status:
ALC2/2019	ROTOTECH PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00132/AM20/	RLA File<br>:56/24/040/00039/AM19/	Lic.No/Date:5610005614<br>16.05.2019	Deferred

117 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 08.08.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred.

Case is deferred.

Case No.:13/5/80-	Party Name: HEURTEY	Meet No/Date:13/80-	Status:
ALC2/2019	PETROCHEM INDIA	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00051/AM20/	RLA File<br>:34/24/040/00059/AM20/	Lic.No/Date:3410045150<br>17.05.2019	Deferred

118 Decision: The Committee considered the case as per the agenda and decided to ask again from the firm to furnish following information as per the advice of representative of DHI:

To clarify whether the export item is CG or lab equipment.

Case is deferred.

119

Case No.:12/5/80-	Party Name: DILIGENT	Meet No/Date:13/80-	Status:
ALC2/2019	SCM SOLUTIONS	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00050/AM20/	RLA File<br>:09/24/040/00078/AM20/	Lic.No/Date:0910067545<br>20.05.2019	Deferred

Case is deferred.

35 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:20/5/80- Party Name: ULTRA Meet No/Date:13/80- Status: ALC2/2019 ENGINEERS ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:3110067427 Deferred :01/80/050/00058/AM20/ :31/83/040/00026/AM20/ 22.05.2019 120 Decision: The Committee considered the case as per the agenda and noted that the firm’s reply was sent to DHI on 17.09.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:21/5/80- Party Name: CERATIZIT Meet No/Date:13/80- Status: ALC2/2019 INDIA ROUND TOOL ALC2/2019 SOLUTIONS P.LTD. 23.10.2019 HQ File RLA File Lic.No/Date:0710114952 Deferred :01/80/050/00059/AM20/ :07/24/040/00017/AM20/ 24.05.2019 121 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Bangalore & the firm and in this regard a letter was sent to RA, Bangalore and the firm on 15.07.2019 followed by a reminder on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:1/7/80- Party Name: CROWN Meet No/Date:13/80- Status: ALC2/2019 CLOSURES PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310829905 Deferred :01/80/050/00098/AM20/ :03/94/040/00246/AM20/ 25.06.2019 122 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm and in this regard a letter was sent to RA, Mumbai and the firm on 08.08.2019 & 13.08.2019 respectively. A reminder letter was also sent to RA, Mumbai on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:2/7/80- Party Name: OSWAL Meet No/Date:13/80- Status: ALC2/2019 PUMPS LIMITED ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:3310030557 Deferred :01/80/050/00099/AM20/ :33/24/040/00012/AM20/ 25.06.2019 123 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Panipat & the firm and in this regard a letter was sent to RA, Panipat and the firm on 08.08.2019 & 13.08.2019 respectively. However, only amendment sheet of export items was sent by the firm. Therefore, the Committee decided to request again RA, Panipat & the firm for submitting the complete set of application. Case is deferred. ----- End of picture text -----

36 | P a g e

124

Case No.:3/7/80-	Party Name: OAM SAAI	Meet No/Date:13/80-	Status:
ALC2/2019	INTERNATIONAL INC.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00100/AM20/	RLA File<br>:05/24/040/00181/AM20/	Lic.No/Date:0510411061<br>26.06.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 04.09.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

125

Case No.:4/7/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00101/AM20/	RLA File<br>:09/24/040/00138/AM20/	Lic.No/Date:0910067697<br>26.06.2019	Deferred

Case is deferred.

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:5/7/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067698 Deferred :01/80/050/00102/AM20/ :09/24/040/00142/AM20/ 26.06.2019 126 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

127

Case No.:6/7/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00103/AM20/	RLA File<br>:09/24/040/00140/AM20/	Lic.No/Date:0910067699<br>26.06.2019	Deferred

Case is deferred.

37 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:7/7/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067700 Deferred :01/80/050/00104/AM20/ :09/24/040/00139/AM20/ 26.06.2019 128 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:8/7/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067701 Deferred :01/80/050/00105/AM20/ :09/24/040/00137/AM20/ 26.06.2019 129 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:9/7/80- Party Name: AZAD Meet No/Date:13/80- Status: ALC2/2019 ENGINEERING PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0910067702 Deferred :01/80/050/00106/AM20/ :09/24/040/00141/AM20/ 26.06.2019 130 Decision: The Committee considered the case as per the agenda and noted that a deficiency letter seeking certain information as raised by DHI was sent to the firm on 16.10.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply. Case is deferred. ----- End of picture text -----

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:10/7/80- Party Name: P. M. Meet No/Date:13/80- Status: ALC2/2019 ELECTRO AUTO PVT. ALC2/2019 LTD. 23.10.2019 HQ File RLA File Lic.No/Date:3110067458 Deferred :01/80/050/00107/AM20/ :31/83/040/00048/AM20/ 28.06.2019 131 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Pune & the firm and in this regard a letter was sent to RA, Pune and the firm on 08.08.2019 & 13.08.2019 respectively. However, no information has been received so far. Therefore, the Committee decided to remind the firm & RA, Pune for submitting the complete set of application. Case is deferred. ----- End of picture text -----

38 | P a g e

Case No.:11/7/80-	Party Name: POLYCAB	Meet No/Date:13/80-	Status:
ALC2/2019	INDIA LIMITED	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00108/AM20/	RLA File<br>:03/95/040/00295/AM20/	Lic.No/Date:0310830021<br>01.07.2019	Deferred

132 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MeitY on 04.09.2019 for examination of the case. However, no comments have been received yet. Therefore, the Committee decided to remind MeitY for expediting the comments.

Case is deferred.

133

Case No.:12/7/80-	Party Name: AUTOCOMP	Meet No/Date:13/80-	Status:
ALC2/2019	CORPORATION PANSE	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00109/AM20/	RLA File<br>:31/83/040/00050/AM20/	Lic.No/Date:3110067460<br>01.07.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 22.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Case No.:13/7/80-	Party Name: BANGALORE	Meet No/Date:13/80-	Status:
ALC2/2019	BIOTECH LABS PVT	ALC2/2019
	LTD.	23.10.2019
HQ File<br>:01/80/050/00110/AM20/	RLA File<br>:07/24/040/00082/AM20/	Lic.No/Date:0710115122<br>03.07.2019	Deferred

134 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME for examination of the case on 12.07.2019 followed by reminder on 17.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

135

Case No.:14/7/80-	Party Name: GENESIS	Meet No/Date:13/80-	Status:
ALC2/2019	PACKAGING PVT.LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00111/AM20/	RLA File<br>:07/24/040/00075/AM20/	Lic.No/Date:0710115123<br>03.07.2019	Deferred

Case is deferred.

39 | P a g e

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:15/7/80- Party Name: DOOWON Meet No/Date:13/80- Status: ALC2/2019 CLIMATE CONTROL ALC2/2019 INDIA PRIVATE LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:6610000035 Deferred :01/80/050/00112/AM20/ :66/24/040/00003/AM20/ 03.07.2019 136 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from the firm & RA, Vijayawada and in this regard a letter was sent to the firm & RA, Vijayawada on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

Case No.:43/11/80-	Party Name: ERBATECH	Meet No/Date:13/80-	Status:
ALC2/2019	MACHINERY PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00169/AM20/	RLA File<br>:32/21/040/00061/AM20/	Lic.No/Date:3210079031<br>19.07.2019	Deferred

137 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Coimbatore & the firm. Therefore, the Committee decided to request from RA, Coimbatore and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

138

Case No.:1/9/80-	Party Name: TOLIA	Meet No/Date:13/80-	Status:
ALC2/2019	INDUSTRIES	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00126/AM20/	RLA File<br>:03/95/040/00218/AM20/	Lic.No/Date:0310830453<br>22.07.2019	Deferred

Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to MSME on 01.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

==> picture [432 x 133] intentionally omitted <==

----- Start of picture text ----- Case No.:2/9/80- Party Name: RONCH Meet No/Date:13/80- Status: ALC2/2019 POLYMERS PVT LTD ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310830576 Withdrawn :01/80/050/00127/AM20/ :03/95/040/00379/AM20/ 25.07.2019 139 Decision: The Committee considered the case as per the agenda and noted that RA, Mumbai informed vide letter dated 07.10.2019 that the case has been issued on repeat basis . Therefore, the Committee decided to withdraw the case from the agenda under intimation to RA, Mumbai . Case is withdrawn. ----- End of picture text -----

40 | P a g e

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:3/9/80- Party Name: DYNA FORCE Meet No/Date:13/80- Status: ALC2/2019 HYDRAULICS PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:3110067484 Deferred :01/80/050/00128/AM20/ :31/83/040/00067/AM20/ 25.07.2019 140 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from the firm & RA, Pune and in this regard a letter was sent to the firm & RA, Pune on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

Case No.:4/9/80-	Party Name: RATNAMANI	Meet No/Date:13/80-	Status:
ALC2/2019	METALS AND TUBES	ALC2/2019
	LTD.	23.10.2019
HQ File<br>:01/80/050/00129/AM20/	RLA File<br>:08/24/040/00135/AM20/	Lic.No/Date:0810145826<br>25.07.2019	Deferred

141 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish following information as per written comments of Consultant (Tech-3):

To provide any documents on disposal of scrap having value in it.

Case is deferred.

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:5/9/80- Party Name: ROTHE ERDE Meet No/Date:13/80- Status: ALC2/2019 INDIA PRIVATE ALC2/2019 LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:3110067486 Deferred :01/80/050/00130/AM20/ :31/83/040/00066/AM20/ 26.07.2019 142 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from the firm & RA, Pune and in this regard a letter was sent to the firm & RA, Pune on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

Case No.:42/11/80-	Party Name: PREMIER	Meet No/Date:13/80-	Status:
ALC2/2019	INDUSTRIAL	ALC2/2019
	CORPORATION LIMITED	23.10.2019
HQ File<br>:01/80/050/00168/AM20/	RLA File<br>:03/95/040/00377/AM20/	Lic.No/Date:0310830608<br>26.07.2019	Deferred

143 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

41 | P a g e

==> picture [432 x 157] intentionally omitted <==

----- Start of picture text ----- Case No.:12/9/80- Party Name: VICTORA Meet No/Date:13/80- Status: ALC2/2019 AUTO PVT. LTD ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0510411435 Deferred :01/80/050/00137/AM20/ :05/24/040/00251/AM20/ 02.08.2019 144 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from the firm & RA, New Delhi and in this regard a letter was sent to the firm & RA, New Delhi on 18.10.2019. However, no information has been received so far. Hence, the Committee decided to wait for the complete set of application for examination of the case. Case is deferred. ----- End of picture text -----

==> picture [432 x 145] intentionally omitted <==

----- Start of picture text ----- Case No.:41/11/80- Party Name: PHOENIX Meet No/Date:13/80- Status: ALC2/2019 FOILS PVT. LTD. ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0310830770 Deferred :01/80/050/00167/AM20/ :03/95/040/00459/AM20/ 02.08.2019 145 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai and the firm to furnish the hard copy of application for examination of the case. Case is deferred. ----- End of picture text -----

==> picture [432 x 302] intentionally omitted <==

----- Start of picture text ----- Case No.:13/9/80- Party Name: SSP PVT.LTD. Meet No/Date:13/80- Status: ALC2/2019 ALC2/2019 23.10.2019 HQ File RLA File Lic.No/Date:0510411438 Deferred :01/80/050/00138/AM20/ :05/24/040/00259/AM20/ 05.08.2019 Decision: The Committee considered the case as per agenda and decided to ask from the firm to furnish the following information as per written comments given by DPIIT vide U. O. No.: P- 47011/267/2019-TSW dated 14.10.2019: 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 146 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. Case is deferred. ----- End of picture text -----

42 | P a g e

Case No.:1/13/80-	Party Name: RONCH	Meet No/Date:13/80-	Status:
ALC2/2019	POLYMERS PVT LTD	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00186/AM20/	RLA File<br>:03/95/040/00654/AM20/	Lic.No/Date:0310832012<br>04.10.2019	Deferred

147 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:2/13/80-	Party Name: FERRUM	Meet No/Date:13/80-	Status:
ALC2/2019	EXTREME ENGINEERING	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00187/AM20/	RLA File<br>:05/23/040/00265/AM20/	Lic.No/Date:0510412040<br>07.10.2019	Deferred

148 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:3/13/80-	Party Name: AVLIGHT	Meet No/Date:13/80-	Status:
ALC2/2019	AUTOMOTIVES PVT.	ALC2/2019
	LTD.	23.10.2019
HQ File<br>:01/80/050/00188/AM20/	RLA File<br>:05/23/040/00266/AM20/	Lic.No/Date:0510412058<br>09.10.2019	Deferred

149 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:4/13/80-	Party Name: L&T- MHPS	Meet No/Date:13/80-	Status:
ALC2/2019	TURBINE GENERATORS	ALC2/2019
	PRIVATE LIMITED	23.10.2019
HQ File<br>:01/80/050/00189/AM20/	RLA File<br>:03/95/040/00681/AM20/	Lic.No/Date:0310832116<br>10.10.2019	Deferred

150 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

43 | P a g e

==> picture [432 x 134] intentionally omitted <==

----- Start of picture text ----- Case No.:5/13/80- Party Name: L&T- MHPS Meet No/Date:13/80- Status: ALC2/2019 TURBINE GENERATORS ALC2/2019 PRIVATE LIMITED 23.10.2019 HQ File RLA File Lic.No/Date:0310832159 Deferred :01/80/050/00190/AM20/ :03/95/040/00655/AM20/ 11.10.2019 151 Decision: The Committee considered the case as per the agenda and noted that a copy of application was sent to DHI on 22.10.2019 for examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments. Case is deferred. ----- End of picture text -----

Case No.:6/13/80-	Party Name: GODREJ &	Meet No/Date:13/80-	Status:
ALC2/2019	BOYCE MFG. CO. LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00191/AM20/	RLA File<br>:03/94/040/00505/AM20/	Lic.No/Date:0310832178<br>11.10.2019	Deferred

152 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Mumbai & the firm. Therefore, the Committee decided to request from RA, Mumbai and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:7/13/80-	Party Name: ISGEC	Meet No/Date:13/80-	Status:
ALC2/2019	HITACHI ZOSEN	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00192/AM20/	RLA File<br>:05/23/040/00269/AM20/	Lic.No/Date:0510412096<br>11.10.2019	Deferred

153

Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:8/13/80-	Party Name: AZAD	Meet No/Date:13/80-	Status:
ALC2/2019	ENGINEERING PRIVATE	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00193/AM20/	RLA File<br>:09/24/040/00347/AM20/	Lic.No/Date:0910068080<br>14.10.2019	Deferred

154 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Hyderabad & the firm. Therefore, the Committee decided to request from RA, Hyderabad and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

44 | P a g e

Case No.:9/13/80-	Party Name: GENESIS	Meet No/Date:13/80-	Status:
ALC2/2019	PACKAGING PVT.LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00194/AM20/	RLA File<br>:07/24/040/00152/AM20/	Lic.No/Date:0710115559<br>14.10.2019	Deferred

155 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Bangalore & the firm. Therefore, the Committee decided to request from RA, Bangalore and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:10/13/80-	Party Name: GOLD	Meet No/Date:13/80-	Status:
ALC2/2019	MOHUR PROFILES	ALC2/2019
	LIMITED	23.10.2019
HQ File<br>:01/80/050/00195/AM20/	RLA File<br>:05/23/040/00279/AM20/	Lic.No/Date:0510412119<br>15.10.2019	Deferred

156 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, New Delhi & the firm. Therefore, the Committee decided to request from RA, New Delhi and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

Case No.:11/13/80-	Party Name: GLOVIS	Meet No/Date:13/80-	Status:
ALC2/2019	INDIA (P) LTD.	ALC2/2019
		23.10.2019
HQ File<br>:01/80/050/00196/AM20/	RLA File<br>:04/24/040/00111/AM20/	Lic.No/Date:0410166162<br>15.10.2019	Deferred

157 Decision: The Committee considered the case as per the agenda and noted that the hard copy of application has not yet been received from RA, Chennai & the firm. Therefore, the Committee decided to request from RA, Chennai and the firm to furnish the hard copy of application for examination of the case.

Case is deferred.

45 | P a g e

Manual Cases

Sl. No. 249

Sl. No. 249
Case No.36/21/80-ALC2/2016	Status:
NAVKAR FITTINGS & FORGINGS<br>M. No.: 13/80-ALC2/2019 dated
PVT. LTD.<br>23.10.2019
Lic. No.: 0310808954 Date: 03.11.2016
HQ. No.: 01/80/050/00496/AM17<br>Subject:Request for fixation of ad-hoc norms	Deferred
RLA No.: 03/95/040/00606/AM17
Decision:The Committee considered the case as per the agenda noted that the case was	rejected in
Meeting No.4/80-ALC2/2017dated 23.05.2017 due to non-submission of reply of deficiency letter
raised by DIPP vide UO No.12/13/2017-TSW/81 dated 02/03/2017.
However, the Party had furnished the reply with a request to re-open their case and fix the ad-
hoc norms. The Committee noted that firm’s representation has been sent toMSMEon	28.11.2018
followed by an ID reminder on 17.09.2019 for expediting the comments.However, no comments have
been received yet. Hence, the Committee decided to wait for the comments.
Case is deferred.

Sl. No. 250

Sl. No. 250
Case No.14/15/80-ALC2/2013	Status:
Automat Irrigation Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated
23.10.2019
Lic. No.: 0510362949 dated 20.08.2013
HQ. No.: 01/80/050/00270/AM14<br>Subject:Request for fixation of ad-hoc norms	Deferred
RLA No.: 05/23/040/00199/AM14
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 22/80 dated 02.02.2016 due to non-submission of reply of deficiency	letter dated
30.07.2014 as raised by C & PC.
However, the Party had furnished the reply with a request to re-open their case and fix the ad-hoc norms.
The Committee noted that the firm’s representation was referred toMSMEon 28.11.2018 followed by
ID reminder on 24.09.2019 for expediting the comments. However, no comments have been received
yet. Hence, the Committee decided to wait for the comments.
Case is deferred.

Sl. No. 251

Sl. No. 251
Case No. 50/2/80-ALC2/2016	Status:
S AND W JEWELLERY PRIVATE<br>M. No.: 13/80-ALC2/2019 dated
LIMITED<br>23.10.2019
Lic. No.: 0710108479 dated 08.07.2015
HQ. No.: 01/80/050/00053/AM17<br>Subject:Request for re-fixation of ad-hoc	Deferred
norms<br>RLA No.: 05/23/040/00125/AM16
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 05/80 dated 07.06.2016 as per written comments of MSME vide U. O. No.: TSW B
3/26/20TL-13024/82/2016-MMM & A-DCMSME dated 20.05.2016.

46 | P a g e

However, the Party vide letter dated 26.04.2017 requested for re-fixation of ad-hoc norms. The Committee noted that a deficiency letter seeking information as raised by MSME, i.e. “ The complete statement of exports along with copies of shipping bills” , was sent to the firm on 30.11.2018 followed by a reminder on 18.09.2019. However, no reply has been received yet. Hence, the Committee decided to wait for the firm’s reply.

Case is deferred.

Sl. No. 252

Case No.39/8/80-ALC2/2015<br>Status:
Donaldson India Filter Systems Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic No. 0510394576 dated 16.06.2015
HQ. No.: 01/80/050/00145/AM16<br>Subject:Request for fixation of ad-hoc norms<br>Withdrawn<br>RLANo.: 05/23/040/00074/AM16
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 17/80 dated 24.11.2015 due to non-submission of reply of deficiency letter dated
27.07.2015.
However, the Party had furnished the reply with a request to re-open their case and fix the ad-hoc norms.
The Committee noted that a deficiency letter seeking information as raised byDPIIT,was sent to the
firm on 28.11.2018 followed by reminder on 18.09.2019. However, the firm vide email dated 11.10.2019
informed that the above AA has beenredeemedafter exports at RA. Therefore, the Committee decided
to withdraw the case from the agenda under intimation toRA, New Delhi.
Case is withdrawn.

Sl. No. 253

Sl. No. 253
Case No.2/4/80-ALC2/2015	Status:
Terumo Penpol Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 5310008377 dated28.05.2009
HQ. No.: 01/80/050/00073/AM16<br>Subject:Request for fixation of ad-hoc norms<br>RLANo.: 53/21/040/00002/AM10	Deferred
Decision:The Committee considered the case as per the agenda and noted its decision of Meeting 11/19
date 30.11.2018 in which representative of MSME stated that the norms may be fixed on the basis of
DIPP recommendation vide No. 7/9/20l6-TSW dt. 08.12.2017 for License No. 5310019514 dt.
05.10.2017 as ratified in Meeting No. 16/80 dated 14.11.2017. However, the Committee observed that
the description of export item in the subject application does not exactly match with that appearing in the
recommendation of DIPP and due to this it was requested to MSME to provide comments.
The Committee noted that the case was referred toConsultant (Tech -1)on 16.10.2019 as
per advice of representative ofMSME.However, no comments have been received yet. Hence, the
Committee decided to wait for the comments.
Caseis deferred.

47 | P a g e

Sl. No. 254

Sl. No. 254
Case No. 2/10/80-ALC2/2014			Status:
M. No.: 13/80-ALC2/2019 dated<br>23.10.2019		Larsen & Toubro Ltd.
Lic. No.: 0310781699 dated 15.05.2014
HQ. No.: 01/80/050/00198/AM15<br>RLA No.: 03/95/040/00038/AM15		Subject:Request for fixation of ad-hoc norms	Deferred
Decision:The Committee considered the		case as per the agenda and noted that the case was rejected in
Meeting No. 11/80 dated 30.08.2016	due to non-submission of reply of deficiency		letter dated
22.02.2016.
The Committee noted that the	firm’s reply against deficiency letter dated 03.01.2019 was sent
toDHIon 18.10.2019 for examination	of the case. However, no comments have been		received yet.
Hence, the Committee decided to wait for		the comments.
Case is deferred.

Sl. No. 255

Case No.26/11/80-ALC2/2016<br>Status:
Dee Development Engineers Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 0510398701dated 01.06.2017
HQ. No.: 01/80/050/00299/AM17<br>Subject:Request for fixation of ad-hoc norms<br>in respect of Advance Authorization issued to<br>M/s. Dee Development Engineers Ltd., under<br>Para 4.7 of HBP(Vol.-I)– reg.<br>Deferred<br>RLA No.: 05/23/040/00101/AM17
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in
Meeting No. 09/80 dated 01.08.2017 due to non-submission of reply of deficiency letter dated
19.04.2017.
The Committee reconsidered the case and noted that the firm’s representation was forwarded
toDHIon 03.12.2018 followed by reminder on 17.09.2019, for examination of the case. However, in the
meeting, the representative ofDHIrequested to send again complete set of application. Therefore, the
Committee decided to send the complete set of application toDHI.
Caseis deferred.

Sl. No. 256

Sl. No. 256
Case No.5/14/80-ALC2/2016	Status:
Injectoplast Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 0610038435 dated 09.08.2016
HQ. No.: 01/80/050/00355/AM17<br>Subject:Request for re-fixation of ad-hoc	Deferred
norms<br>RLA No.: 06/24/040/0015/AM17
Decision:The Committee considered the case as per the agenda and noted that the case was approved in
Meeting No. 17/80 dated 19.12.2017 as per comments of MSME.
However, the firm requested for re-fixation of ad-hoc norms. The Committee noted that the
firm’s representation was forwarded toMSMEon 15.01.2019 followed byreminder on 17.09.2019,for

48 | P a g e

examination of the case. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Sl. No. 257

Case No.21/6/80-ALC2/2016<br>Status:
Dee Development Engineers Ltd.<br>M. No.: 13/80-ALC2/2019 dated
23.10.2019
Lic. No.: 0510398216 dated13.04.2016
HQ. No.: 01/80/050/00180/AM17<br>Subject:Request for fixation of ad-hoc norms<br>Deferred<br>RLANo.: 05/23/040/00015/AM17
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in
Meeting No. 09/80 dated 01.08.2017 due to non-submission of reply of deficiency letter dated
19.04.2017.
However, the firm had furnished the reply with a request to re-open their case and fix the ad-
hoc norms. The Committee noted that the firm’s representation was forwarded toDPIITon 15.01.2019
& reminder on 17.09.2019, for examination of the case. However, the representative ofDPIITinformed
in the meeting that the case is under examination. Therefore, the Committee decided to wait for the
comments.
Caseis deferred.

Sl. No. 258

Sl. No. 258
Case No.15/2/80-ALC2/2016	Status:
Deepeeka Exports Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated
23.10.2019
Lic. No.: 0510396524 dated 04.12.2015
HQ. No.: 01/80/050/00018/AM17<br>Subject:Request for fixation of ad-hoc norms<br>RLA No.: 05/23/040/00371/AM16	Deferred
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in
Meeting No. 14/80 dated 11.10.2016 due to non-submission of reply of deficiency letter dated
04.08.2016.
The Committee noted that the firm’s reply against deficiency letter dated 15.01.2019 was sent
toMSMEon 21.10.2019 for examination of the case. However, no comments have been received yet.
Hence, the Committee decided to wait for the comments.
Case is deferred.

49 | P a g e

Sl. No. 259

==> picture [448 x 77] intentionally omitted <==

----- Start of picture text ----- Case No. 55/3/80-ALC2/2015 Status: M. No.: 13/80-ALC2/2019 dated Goa Thermostatic Instruments Pvt. Ltd. 23.10.2019 Lic. No.: 1710006064 dated 11.03.2015 HQ. No.: 01/80/050/00055/AM16 Approved Subject: Request for fixation of ad-hoc norms RLA No.: 17/24/040/00204/AM15 ----- End of picture text -----

Decision: The Committee considered the case as per the agenda and noted that the case was rejected in Meeting No. 21/80 dated 19.01.2016 due to non-submission of reply of deficiency letter dated 08.10.2015. The firm furnished reply vide letter dated 15.11.2017, 23.09.2019 & 21.10.2019. The Committee reconsidered the case and decided to ratify the ad-hoc norms as per written comments given by MSME as under: Export items: 1. Per unit net content of imported item in Sl. No. 1 of export item is 10.34 Kg. 2. Per unit net content of imported item in Sl. No. 2 of export item is 12.93 Kg. 3. Per unit net content of imported item in Sl. No. 3 of export item is 8.55 Kg. Import items: 1. Quantity of relevant import item at Sl. No. 1 may be allowed as 3321 Kg (25.679 M) inclusive of 258% scrap after 1/3[rd] recovery. 2. Quantity of relevant import item at Sl. No. 2 may be allowed as 203 Kg (2.136 M) inclusive of 296% scrap after 1/3[rd] recovery. 3. Quantity of relevant import item at Sl. No. 3 & 4 may be allowed under General Note-4 . RA concerned may take further necessary action as per the decision of NC.

Sl. No. 260

Case No.16/15/80-ALC2/2013<br>Status:	Case No.16/15/80-ALC2/2013<br>Status:	Case No.16/15/80-ALC2/2013<br>Status:	Case No.16/15/80-ALC2/2013<br>Status:	Case No.16/15/80-ALC2/2013<br>Status:
Indus Pro Auto Engineers Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019<br>Lic. No.: 0510363605 dated26.08.2013

HQ. No.: 01/80/050/00272/AM14<br>SbR f fii f dh<br>Approved
uject:equest or xaton o a-oc norms<br>RLA No.: 05/23/040/0221/AM14
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in<br>Meeting No. 19/80 dated 09.12.2014 due to non-submission of reply of deficiency letter dated<br>13.06.2014. The firm furnished reply vide letter dated 28.01.2019 which was referred to MSME.<br>However, the Committee reconsidered the case and decided to ratify the norms as per written<br>comments given byMSMEas under:<br>ITCHS<br>Code<br>Export Item<br>ITCHS<br>Code<br>Import Item<br>Recommended<br>Norms<br>87089900<br>DASH BOARD Made up of<br>Vinyl sheeting Sierra Black<br>Skin, Polyol, mdi isocyanate<br>&Plastic/metal<br>Reinforcement<br>39205119<br>VINYL<br>SHEETING<br>SIERRA BLACK<br>SKIN<br>1.05 Sq. Mtr/Sq. Mtr<br>of export product,<br>taking cue from<br>SION H-88<br>RA concerned maytake further necessaryaction asper the decision of NC.
ITCHS<br>Code	Export Item	ITCHS<br>Code	Import Item	Recommended<br>Norms
87089900	DASH BOARD Made up of<br>Vinyl sheeting Sierra Black<br>Skin, Polyol, mdi isocyanate<br>&Plastic/metal<br>Reinforcement	39205119	VINYL<br>SHEETING<br>SIERRA BLACK<br>SKIN	1.05 Sq. Mtr/Sq. Mtr<br>of export product,<br>taking cue from<br>SION H-88
RA concerned maytake further necessaryaction asper the decision of NC.

50 | P a g e

Sl. No. 261

Sl. No. 261
Case No. 45/24/80-ALC2/2013<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019<br>Lic. No.: 0310766285 dated 15.01.2014	Kelvion India Pvt. Ltd.<br>Status:
HQ. No.: 01/80/050/00522/AM14<br>Subject:Request for fixation of ad-hoc norms<br>Deferred<br>RLA No.: 03/94/040/00880/AM14
Decision:The Committee considered the case as per the agenda noted that the case was rejected in<br>Meeting No. 22/80 dated 20.01.2015 due to non-submission of reply of deficiency letter dated<br>30.07.2014.<br>The firm furnished the reply vide letter dated 20.11.2017 with a request to fix the ad-hoc<br>norms. The Committee noted that a deficiency letter, which was sent to the firm on 27.11.2018, was not<br>delivered to the firm due to incorrect email id. However, the deficiency letter as raised byDPIITwas<br>sent again to the firm on their correct email id on 21.10.2019. Since, no reply has been received yet, the<br>Committee decided to wait for the firm’s reply.<br>Case is deferred.

Sl. No. 262

Sl. No. 262
Case No. 54/2/80-ALC2/2012	Status:
Driplex Water Engineering P. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 0510317886 dated 15.02.2012
HQ. No.: 01/80/050/00018/AM13<br>Subject:Request for re-fixation of ad-hoc	Approved
norms<br>RLA No.: 05/23/040/00450/AM12
Decision:The Committee considered the case as per the agenda and noted that the case was approved in
Meeting No. 09/80 dated 24.07.2012 as per written comments of DHI.
The Committee noted that the firm had requested to change theUnit of Measurement
(UoM)of import items at Sl. No. 6 & 7 asLitreinstead ofKg. The firm’s representation was sent to
DHIon 29.07.2019 for comments and on the recommendation of representative of DHI, the Committee
decided to ratify the norms as under:
1. UOM of import item at Sl. No. 6 & 7 to be read as Litre.
Note: Decision for rest of the import items will remain unchanged as approved in Meeting No.
09/80 dated 24.07.2012.
RA concerned maytake further necessaryaction asper the decision of NC.

51 | P a g e

Sl. No. 263

Case No. 52/15/80-ALC2/2013	Status:
Sharma Pharmaceutical Pvt. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No. : 3410037864 dated 11.09.2013
HQ. No.: 01/80/050/00308/AM14<br>Subject:Request for fixation of ad-hoc norms<br>RLA No.: 34/24/040/00131/AM14	Deferred
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 04/80 dated 13.05.2014 due to non-submission of reply of deficiency	letter dated
17.12.2013.
The Committee noted that a deficiency letter seeking certain information as raised byDPIIT
was sent to the firm on 16.07.2019 & subsequent reminder on 24.09.2019. However, no reply has been
received yet. Hence, the Committee decided to wait for the firm’s reply.
Case is deferred.

Sl. No. 264

Case No.11/24/80-ALC2/2013<br>Status:
Himenviro Environmental P. Ltd.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 0510374103 dated19.12.2013
HQ. No.: 01/80/050/00488/AM14<br>Subject:Request for fixation of ad-hoc<br>Rejected
norms<br>RLANo.: 05/23/040/00367/AM14
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 01/80 dated 01.04.2014 as per written comments of DIPP U.O. No.: 12/78/2014-TSW/93
dated 01.04.2014.
The firm vide letter dated 08.10.2017 requested for re-fixation of ad-hoc norms. The
Committee reconsidered the case and noted that on behalf of the firm nobody appeared for personal
hearing on 17.10.2018, 25.09.2019 & 23.10.2019 to explain the case before Norms Committee and there
is no information/reply from the party. Therefore, the Committee decided torejectthe case under
intimation toRA, New Delhi.
RA concerned maytake further necessaryaction asper the decision of NC.

Sl. No. 265

==> picture [448 x 146] intentionally omitted <==

----- Start of picture text ----- Case No. A/R 16/19 TATA Sikorsky Aerospace Ltd. Status: M. No.: 13/80-ALC2/2019 dated 23.10.2019 HQ. No.: Subject: EOU- M/s. TATA Sikorsky Aerospace Ltd., Deferred 01/80/162/301/AM18/DES-18 LOP No. PER: 076/EOU/VSEZ/HYD/2011 dated 25.07.2011 for fixation of wastage norms for export product “Helicopter cabin kits & parts and accessories for Aircraft” against import items 1. Stainless Steel bars/rods 2. Stainless Steel Tube/Pipes 3. Stainless Steel round bars Decision:T he Committee considered the case as per the agenda and noted that the application of the firm was sent to DIPP on 10.07.2018 and also to DHI on 03.08.2018 for their examinations/comments. Since, ----- End of picture text -----

52 | P a g e

they had stated that the export product is not under the purview of DIPP/DHl, so it was forwarded to MSME on 18.03.2019 and 24.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

Sl. No. 266

Sl. No. 266
Case No.36/5/80-ALC2/2018		Status:
CHASYS AUTOMOTIVE COMPONENTS<br>PVT. LTD.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 3110067031 dated 17.04.2018
HQ. No.: 01/80/050/00085/AM19<br>Subject:Request for re-fixation of ad-hoc		Withdrawn
norms<br>RLA No.: 31/83/040/00002/AM19
Decision:The Committee considered the case as per the agenda noted that the case was		approved in
Meeting No. 10/80 dated 16.11.2018 as per written comments of DHI vide U.O. NO. TSWB /3/60/2017
dated 24.11.2017.
The Committee reconsidered the case and the firm’s representative explained the case before
Norms Committee during personal hearing. The firm had misunderstood the norms fixed		by the NC.
Upon explanation, the firm’s representative agreed to the wastage allowed by NC. Therefore, the
Committee decided to withdraw the case from the agenda.
Caseis withdrawn.

Sl. No. 267

Sl. No. 267
Case No.34/19/80-ALC2/2017	Status:
CHASYS AUTOMOTIVE COMPONENTS<br>M. No.: 13/80-ALC2/2019 dated
PVT. LTD.<br>23.10.2019
Lic. No.: 3110066895 dated 31.10.2017
HQ. No.: 01/80/050/00315/AM18<br>Subject:Request for re-fixation of ad-hoc	Withdrawn
norms<br>RLA No.: 31/83/040/00101/AM18
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 09/80 dated 17.10.2018 as per written comments of DHI vide U.O. NO. TSWB FN: 3
(35)/2017 dated 27.3.2017.
The Committee reconsidered the case and the firm’s representative explained the case
before Norms Committee during personal hearing. The firm had misunderstood the norms fixed by the
NC. Upon explanation, the firm’s representative agreed to the wastage allowed by NC. Therefore, the
Committee decided to withdraw the case from the agenda.
Case is withdrawn.

53 | P a g e

Sl. No. 268

Sl. No. 268
Case No. 26/7/80-ALC2/2017	Status:
CHASYS AUTOMOTIVE COMPONENTS<br>PVT. LTD.<br>M. No.: 13/80-ALC2/2019 dated<br>23.10.2019
Lic. No.: 3110066727 dated 09.05.2017
HQ. No.: 01/80/050/00136/AM18<br>Subject:Request for re-fixation of ad-hoc	Withdrawn
norms<br>RLA No.: 31/83/040/00181/AM17
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 17/80 dated 19.12.2017 on the recommendation of DHI.
The Committee reconsidered the case and the firm’s representative explained the case
before Norms Committee during personal hearing. The firm had misunderstood the norms fixed by the
NC. Upon explanation, the firm’s representative agreed to the wastage allowed by NC. Therefore, the
Committee decided to withdraw the case from the agenda.
Case is withdrawn.

Sl. No. 269

Case No.14/8/80-ALC2/2017<br>Status:
CHASYS AUTOMOTIVE<br>M. No.:13/80-ALC2/2019 dated23.10.2019
COMPONENTS PVT. LTD.<br>Lic. No.: 3110066778 dated 09.06.2017
HQ. No.: 01/80/050/00158/AM18<br>Subject:Request for re- fixation of ad-<br>Withdrawn
hoc norms.<br>RLA No.: 31/83/040/00033/AM18
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 17/80 dated 19.12.2017 as per written comments of DHI vide letter No.: TSWB/3/60/2017
dated 24.11.2017.
The Committee reconsidered the case and the firm’s representative explained the case
before Norms Committee during personal hearing. The firm had misunderstood the norms fixed by the
NC. Upon explanation, the firm’s representative agreed to the wastage allowed by NC. Therefore, the
Committee decided to withdraw the case from the agenda.
Caseis withdrawn.

Sl. No. 270

Sl. No. 270
Case No.59/6/80-ALC2/2016	Status:
L&T-MHPS BOILERS PVT. LTD.<br>M. No.:13/80-ALC2/2019 dated23.10.2019
Lic. No.: 0310804134dated25.04.2016
HQ. No.: 01/80/050/00219/AM17<br>Subject:Request for re-fixation of ad-hoc	Deferred
norms.<br>RLANo.: 03/95/040/00792/AM16
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 12/80 dated 13.09.2016 as per written comments of DHI vide U.O. No.3/62/2016-TSW (B)
dated 04.08.2016.
The Committee noted that the firm’s reply against deficiency letter dated 21.10.2019 was sent
toDHIon 22.10.2019 for examination of the case. However, no comments have been	received yet.
Hence, the Committee decided to wait for the comments.
Caseis deferred.

54 | P a g e

Sl. No. 271

Case No.17/21/80-ALC2/2016<br>Status:
TRF LIMITED<br>M. No.:13/80-ALC2/2019 dated23.10.2019
Lic. No.: 0210206731 dated 03.06.2016
HQ. No.: 01/80/050/00477/AM17<br>Subject:Request for fixation of ad-hoc<br>Deferred
norms<br>RLANo.: 02/24/040/00041/AM17
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 16/80 dated 14.11.2017 on the ground that there is no manufacturing activity involved.
The Committee reconsidered the case and noted that the firm was called for personal hearing
on 25.09.2019 & 23.10.2019 to explain the case before Norms Committee as per advice of DPIIT.
However, nobody was appeared for personal hearing on behalf of the firm. Hence, the Committee
decided to give last opportunity to the firm forpersonal hearingto explain the case before Norms
Committee.
Case is deferred.

Sl. No. 272

Case No.67/2/80-ALC2/2016<br>Status:
ECOCAT INDIA PVT.LTD<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No.: 0510397548 dated 09.02.2016
HQ. No.: 01/80/050/00070/AM17<br>Subject:Request for fixation of ad-hoc<br>Deferred
norms<br>RLANo.: 05/23/040/00472/AM16
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 15/80 dated 06.03.2019 due to non-submission of reply of deficiency letter dated
11.10.2018.
However, the firm had requested for fixation of ad-hoc norms. The Committee noted that the
firm’s representation was forwarded toMSMEon 11.07.2019 followed by reminder on 24.09.2019, for
examination of the case. However, no comments have been received yet. Hence, the Committee decided
to wait for the comments.
Case is deferred.

Sl. No. 273

Case No.23/5/80-ALC2/2018 <br>Status:
RITES LTD.<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No.: 0510406273 dated 27.04.2018
HQ. No.: 01/80/050/00072/AM19<br>Subject:Request for re-fixation of ad-<br>Approved
hoc norms<br>RLA No.: 05/24/040/00045/AM19
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 03/80 dated 08.05.2019 due to non-submission of reply of deficiency letter dated
27.11.2018. The firm furnished the reply vide letter dated 10.06.2019 and the case was considered in
meeting No. 9/80 dated 14.08.2019 wherein the firm was asked to submit weight of import item at Sl.
No.1 and its weight after machining.
In view theparty’s replydated 01.10.2019,the Committee reconsidered the case and decided

55 | P a g e

to ratify the ad-hoc norms on the basis of inputs given by Technical Authorities as under:

ITCHS<br>Code	Export<br>Item	ITCHS<br>Code	Import Item Name.	Recommended<br>Norms
86021000	Diesel<br>Electric<br>Locomoti<br>ves	86071910	Solid Forged Wheel Rough Machined,<br>BSS 5892 Part 3 of 1992 Grade R9 E or T<br>and to DLW Drg./ Part No.17230421<br>(Wheel Mono Block- semi finished).	Number in Net to<br>Net and weight of<br>item as given with<br>10<br>kg<br>wastage<br>allowed for each<br>wheel
		85021340	RITES-SLR-LOCO-KIT AND RITES-<br>SLR-LOCO-KIT-L, EMD COMPONENT<br>KIT, Part No.40299708, and Part<br>No.40299707	Deleted

RA concerned may take further necessary action as per the decision of NC.

Sl. No. 274

==> picture [448 x 75] intentionally omitted <==

----- Start of picture text ----- Case No. 27/9/80-ALC2/2017 Status: M. No.: 13/80-ALC2/2019 dated TERUMO PENPOL PRIVATE LIMITED 23.10.2019 Lic. No.: 5310019417 dated 15.06.2017 HQ. No.: 01/80/050/00205/AM18 Subject: Request for fixation of ad-hoc norms Deferred RLA No.: 53/24/040/00003/AM18 ----- End of picture text -----

Decision: The Committee considered the case as per the agenda noted that the case was approved in Meeting No. 03/80 dated 09.05.2018 as per written comments of DIPP (TSW section) vide letter No.: 07/9/2016-TSW dated 08.12.2017. However the firm requested to re-fix the norms and also allow them for Personal Hearing .

In continuation to Meeting 09/80 dated 14.09.2019, the Committee noted that the firm appeared for PH in its Meeting 09/80 dated 14.09.2019 and explained the reason for higher wastage claimed. Based on the deliberations, the Committee decided that Consultant (Tech 1) to look into the issue.

Consultant (Tech-1) pointed out that firm is requesting to increase the wastage norms for PVC compound from 10% to 16% on the basis of Deptt. of C&PC suggestion vide letter dated 10.09.2012 for amending the SION H-67 and AA of the firm has been ratified on the basis of SION H-67 which allows for only 10%. Consultant (Tech 1) suggested that PLEXCOUNCIL may be requested to provide Production/Consumption data of other manufacturers.

The Committee noted that the case was referred to Deptt. of C & PCas decided in the Meeting No. 11/80 dated 25.09.2019. However, no comments have been received yet. Hence, the Committee decided to wait for the comments.

Case is deferred.

56 | P a g e

Sl. No. 275

Case No. 2/19/80-ALC2/2017<br>Status:
TIL LIMITED<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No.: 0210207957 dated 09.11.2017
HQ. No.: 01/80/050/00283/AM18<br>Subject:Request for fixation of ad-hoc<br>Rejected
norms<br>RLA No.: 02/24/040/00121/AM18
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 04/80 dated 23.05.2018 on the recommendation of DHI.
The firm vide letter dated 26.06.2019 requested for re-fixation of ad-hoc norms. The Committee
reconsidered the case and noted that the firm’s representation was referred toDHIon 26.07.2019 for
examination of the case. However, the Committee noted during deliberations that the firm has already
completed partial exports with earlier fixed norms and is desiring to change the norms midway through
the exports. Therefore, the committee decided to reject the case.

Sl. No. 276 Withdrawan

Sl. No. 277

Case No. 8/16/80-ALC2/2016<br>Status:
M/s. AKSHAR PRECISION TUBES PVT.<br>M. No.: 13/80 dated 23.10.2019
LTD.<br>Lic. No. /date: 3410042233<br>Dated:01.06.2016
HQ. No.: 01/80/50/383/AM17/DES-I<br>Subject: Request for reviewing of ad-hoc norms<br>Approved
RLA No.: 34/24/040/00027/AM17
Decision: The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No. 22/80-ALC2/2016 dated 31.01.2017 due to non submission of reply against the deficiency
raised by DPIIT.
However, the Party furnished the reply vide their latter dated 14.03.2019 with a request to
reopen their case and fix the ad-hoc norms. The Committee reconsidered the case and decided toratify
the ad-hoc norms as per written comments ofDPIITvide U. O. No.: P-47011/238/2019- TSW dated
15.10.2019. (Copy enclosed)
RAconcernedmaytakefurther necessaryaction as per the decisionofNC.

57 | P a g e

Sl. No. 278

==> picture [448 x 84] intentionally omitted <==

----- Start of picture text ----- Case Number : 61/25/80-ALC2/2016 Status: M. No.: 13/80 dated 23.10.2019 M/s. BARODA EQUIPMENT AND Lic. No. /date: 3410042545 VESSELS PVT. LTD. Date: 21.09.2016 HQ. No.: 01/80/50/621/AM17/DES-I Subject: Request for reviewing of ad-hoc norms Deferred RLA No.: 34/24/040/00182/AM17 ----- End of picture text -----

Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 14/80-ALC2/2017 dated 10.10.2017due to non submission of reply of deficiency raised by DPIIT.

However, the Party furnished the reply vide their letter dated 31.07.2019 with a request to fix the ad-hoc norms. The Committee considered the case and decided to ask from the firm to furnish the following information as per written comments of DPIIT vide U. O. No.: P-47012/61/2019-TSW dated 15.10.2019:

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
Weight of each Export Product.
Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

Case is deferred.

Sl. No. 279

Case No. :24/17/80-ALC2/2014<br>M/s GEA BGR ENERGY SYSTEM<br>INDIA LIMITED<br>Status:<br>M. No.: 13/80 dated 23.10.2019<br>Lic. No. /date: 0410159425 Date: 16.09.2014
HQ. No.: 01/80/050/00396/AM15<br>Subject:Request for fixation of ad-<br>hoc norms<br>Deferred<br>RLA No.: 04/24/040/00154/AM15
Decision: The Committee considered the case as per the agenda and noted that the case was rejected in
Meeting No. 05/80-ALC2/2016dated 08.06.2015due to non submission of reply to the deficiency (raised
by DHI).
However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered
the case and noted that firm’s representation was sent toDHIon 21.08.2019 for examination of the case.
The representative ofDHIagain requested for the complete set of firm’s representation. Therefore, the
Committee decided to forward the complete set of firm’s representation toDHI.
Case is deferred.

58 | P a g e

Sl. No. 280

Case No. : 24/19/80-ALC2/2014<br>Status:
M/s SHAKTI PUMPS (INDIA) LTD.<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No. /date: 5610004450 Date: 21.10.2014
HQ. No.: 01/80/050/00458/AM15<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>Deferred<br>RLA No.: 56/24/040/00042/AM15
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 5/80-ALC2/2016dated 07.06.2016as per recommendation of DIPP vide ID Note No.
12/46/2016-TSW/11 dated 03.06.2016.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered
the case and noted that firm’s representation was referred toDPIITon 24.09.2019 for examination of the
case. The representative ofDPIITagain requested for the complete set of firm’s representation.
Therefore, the Committee decided to forward the complete set of firm’s representation toDPIIT.
Case is deferred.

Sl. No. 281

Sl. No. 281
Case No. : No.:9/12/80-ALC2/2017<br>M/s.SMC PNEUMATICS (INDIA)<br>PRIVATE LIMITED<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019<br>Lic. No. /date: 0510403402/14.07.2017	Status:
HQ. No.: 01/80/050/00223/AM18<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>RLA No.: 05/24/040/00172/AM18	Deferred
Decision:The Committee considered the case as per the agenda noted that the case was	approved in
Meeting No.3/80-ALC2/2016 dated 09.05.2018as per recommendation of DHI, DIPP	and MSME
present in the meeting.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee	reconsidered
the case and decided to ask from the firm to furnish the following information as per written comments
ofConsultant (Tech-3):
1. To provide documents of disposal of scrap in last 3 years having value in it.
Case is deferred.

Sl. No. 282

Sl. No. 282
Case No. :16/8/80-ALC2/2018<br>M. No.:13/80-ALC2/2019 dated23.10.2019<br>Lic. No.: 0510407130 Date: 09.07.2018	M/s.SMC PNEUMATICS (INDIA)<br>PRIVATE LIMITED<br>Status:
HQ. No.: 01/80/050/139/AM19	Subject:Request for re-fixation of ad-hoc<br>Deferred
RLA No.: 05/24/040/00207/AM19	norms
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No.4/80-ALC2/2019 dated 22.05.2018as per written comments ofDPIITvide U. O. No.: P-
47011/289/2018-TSW dated 25.04.2019.
However,the firm has requested for re-fixation of ad-hoc norms. The Committee

59 | P a g e

reconsidered the case and decided to ask from the firm to furnish the following information as per written comments of Consultant (Tech-3 ):

To provide documents of disposal of scrap in last 3 years having value in it.

Case is deferred.

Sl. No. 283

==> picture [448 x 71] intentionally omitted <==

----- Start of picture text ----- Case No. 28/19/80-ALC2/2014 Status: M. No.: 13/80-ALC2/2019 dated 23.10.2019 VOITH HYDRO PRIVATE Lic. No.: 0510391512 dated 09.10.2014 LIMITED HQ. No.: 01/80/050/00462/AM15 Subject: Request for fixation of ad-hoc Deferred RLA No.: 05/24/040/00277/AM15 norms ----- End of picture text -----

Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 12/80 dated 12.09.2017 due to non-submission of reply of deficiency letter dated 04.05.2017. However, the firm vide letter dated 30.05.2019 furnished the reply with a request to fix the ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per advice of representative of DHI : 1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. (Export product wise) 2. Rating of export product. Case is deferred.

Sl. No. 284

==> picture [448 x 64] intentionally omitted <==

----- Start of picture text ----- Case No. 72/27/80-ALC2/2014 Status: M. No.: 13/80-ALC2/2019 dated 23.10.2019 VOITH HYDRO PRIVATE LIMITED Lic. No.: 0510393194 Date: 13.02.2015 HQ. No.: 01/80/050/00697/AM15 Subject: Request for fixation of ad-hoc Deferred RLA No.: 05/24/040/00547/AM15 norms ----- End of picture text -----

Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 12/80 dated 12.09.2017 due to non-submission of reply of deficiency raised by DHI vide UO No.3 (85)/15-TSW (B) dated 06.11.2015. However, the firm vide letter dated 30.05.2019 furnished the reply with a request to fix the adhoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per advice of representative of DHI : 1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. (Export product wise) 2. Rating of export product.

60 | P a g e

Case is deferred.

Sl. No. 285

==> picture [448 x 75] intentionally omitted <==

----- Start of picture text ----- Case No. 41/3/80-ALC2/2015 Status: M. No.: 13/80-ALC2/2019 dated 23.10.2019 Y-TEC INDIA PVT. LTD. Lic. No.: 0510393093 dated 05.02.2015 HQ. No.: 01/80/050/00041/AM16 Subject: Request for fixation of ad-hoc Deferred RLA No.: 05/24/040/00523/AM15 norms Decision: The Committee considered the case as per the agenda noted that the case was rejected in ----- End of picture text -----

Decision: The Committee considered the case as per the agenda noted that the case was rejected in Meeting No. 18/80 dated 08.12.2015 due to non-submission of reply of deficiency letter dated 22.06.2015.

Meeting No. 18/80 dated 08.12.2015 due to non-submission of reply of deficiency letter dated 22.06.2015. However, the firm vide letter dated 20.12.2018 submitted the representation with a request to fix the ad-hoc norms. The Committee reconsidered the case and decided to ask from the firm to furnish the following information as per written comments of Consultant (Tech-1 ): 1. To provide exact details & catalogue of import item at Sl. No. 1, 2, 9, 12, 15, 16, 19, 20 & 30. 2. To provide details of indigenous inputs with their quantity. 3. To provide net content of rubber compound in each of export product. 4. Stage wise manufacturing process indicating wastage. 5. Justification for 10% wastage in rubber compounding. 6. Material balance in term of weight of rubber compound in import & export. Case is deferred.

Sl. No. 286

Sl. No. 286
Case No.14/3/80-ALC2/2017	Status:
BGR ENERGY SYSTEMS LIMITED<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No. /date: 0410162877Date: 09.03.2017
HQ. No.: 01/80/050/00014/AM18<br>Subject:Request for fixation of ad-hoc	Deferred
norms<br>RLA No.: 04/24/040/00215/AM17
Decision:The Committee considered the case as per the agenda noted that the case was rejected in
Meeting No.12/80-ALC2/2017dated 12.09.2017 due to non-submission of reply of deficiency raised
by DIPP vide U. O. No.:12/36/2017-TSW/160 dated 16/05/2017.
However, the firm furnished the reply with a request to fix the ad-hoc norms. The Committee
noted that the firm’s representation was sent to DPIIT on 29.07.2019 followed by	reminder on
23.09.2019, for examination of the case. The representative ofDPIITagain requested for	the complete
set of firm’s representation. Therefore, the Committee decided to forward the complete	set of firm’s
representation toDPIIT.
Caseis deferred.

61 | P a g e

Sl. No. 287

Case No. :25/21/80-ALC2/2016<br>M/s L & T-MHPS TURBINE<br>Status:
GENERATORS PRIVATE<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
LIMITED<br>Lic. No. /date: 0310808650 Date: 21.10.2016
HQ. No.: 01/80/050/00485/AM17<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>Deferred<br>RLA No.: 03/95/040/00528/AM17
Decision:The Committee considered the case as per the agenda noted that the case was approved in
Meeting No. 11/80-ALC2/2018 dated 06.12.2018as per DHI written recommendation vide F. No.
3/12/2017/TSW(B) dated 18.05.2018.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered
the case and noted that firm’s representation was referred toDHIon 24.09.2019 for examination of the
case. However, no comments have been received yet. Hence, the Committee decided to wait for the
comments.
Case is deferred.

Sl. No. 288

Sl. No. 288
Case No. : 34/20/80-ALC2/2017	Status:
L&T-MHPS BOILERS PVT LTD<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
Lic. No. /date: 0310818379 Date: 10.01.2018
HQ. No.: 01/80/050/00398/AM18<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>RLA No.: 03/95/040/00677/AM18	Deferred
Decision:The Committee considered the case as per the agenda noted that the case was	approved in
Meeting No.20/80-ALC2/2017dated 21.03.2018 as per DHI written recommendation.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case
and decided to refer the case toDHIfor examination of the case.
Case is deferred.

Sl. No. 289

Sl. No. 289
Case No.: 39/5/80-ALC2/2017<br>L & T-MHPS TURBINE	Status:
GENERATORS PRIVATE<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
LIMITED<br>Lic. No. /date: 0310813078 Date: 05.05.2017
HQ. No.: 01/80/050/00100/AM18<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>RLA No.: 03/95/040/01041/AM17	Deferred
Decision:The Committee considered the case as per the agenda noted that the case was	approved in
Meeting No.15/80-ALC2/2018dated 06.03.2019 as per the written comments of DHI vide their U.O.
No. DES-I/L&T/Tu-1-2018-HEI dated 24.12.2018.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case
and decided to refer the case toDHIfor examination of the case.
Caseis deferred.

62 | P a g e

Sl. No. 290

Sl. No. 290
Case No.: 7/11/80-ALC2/2015<br>L & T-MHPS TURBINE	Status:
GENERATORS PRIVATE<br>M. No.: 13/80-ALC2/2019 dated 23.10.2019
LIMITED<br>Lic. No. /date: 0310796416 Date: 04.06.2015
HQ. No.: 01/80/050/00214/AM16/<br>Subject:Request for re-fixation of ad-<br>hoc norms<br>RLA No.: 03/95/040/00086/AM16	Deferred
Decision:The Committee considered the case as per the agenda and noted that the case was approved in
Meeting No.9/80-ALC2/2016dated 02.08.2016 as per the written comments of DHI vide	U. O. No.: 3
(174)/15-TSW (B) dated 19.07.2016.
However, the firm has requested for re-fixation of ad-hoc norms. The Committee reconsidered the case
and decided to refer the case toDHIfor examination of the case.
Case is deferred.

Sl. No. 291

Case No.:13/16/80-ALC2/2017<br>L & T-MHPS TURBINE<br>Status:
GENERATORS PRIVATE<br>M. No.:13/80-ALC2/2019 dated23.10.2019
LIMITED<br>Lic. No. /date: 0310815484 Date: 01.09.2017
HQ. No.: 01/80/050/00276/AM18<br>Subject:Request for fixation of ad-hoc<br>Deferred
norms<br>RLA No.: 03/95/040/00052/AM18
Decision:The Committee considered the case as per the agenda and noted that the case was rejected in
Meeting No.6/80-ALC2/2018dated 11.07.2018 on the ground that the parts of the import items
given ( Unit of Measurement) in sets and number of parts in each set and their composition is not known.
The Committee found that it was very difficult to enforce accountability and rejected the case.
However, the firm has requested for fixation of ad-hoc norms. The Committee reconsidered the case and
noted that firm’s representation was referred toDHIon 09.10.2019 for examination of the case.
However, no comments have been received yet. Hence, the Committee decided to wait for the
comments.
Case is deferred.

63 | P a g e

==> picture [425 x 599] intentionally omitted <==

64 | P a g e

==> picture [425 x 596] intentionally omitted <==

65 | P a g e

==> picture [425 x 594] intentionally omitted <==

66 | P a g e

==> picture [425 x 599] intentionally omitted <==

67 | P a g e

==> picture [425 x 596] intentionally omitted <==

68 | P a g e

==> picture [425 x 583] intentionally omitted <==

69 | P a g e

==> picture [425 x 604] intentionally omitted <==

70 | P a g e

==> picture [425 x 607] intentionally omitted <==

71 | P a g e

==> picture [425 x 603] intentionally omitted <==

72 | P a g e

==> picture [425 x 602] intentionally omitted <==

73 | P a g e

==> picture [425 x 592] intentionally omitted <==

74 | P a g e

==> picture [425 x 595] intentionally omitted <==

75 | P a g e

==> picture [425 x 605] intentionally omitted <==

76 | P a g e

==> picture [425 x 598] intentionally omitted <==

77 | P a g e

==> picture [425 x 602] intentionally omitted <==

78 | P a g e

==> picture [425 x 596] intentionally omitted <==

79 | P a g e

==> picture [425 x 599] intentionally omitted <==

80 | P a g e

==> picture [425 x 606] intentionally omitted <==

81 | P a g e

==> picture [425 x 595] intentionally omitted <==

82 | P a g e

==> picture [425 x 598] intentionally omitted <==

83 | P a g e

==> picture [425 x 604] intentionally omitted <==

84 | P a g e

==> picture [425 x 598] intentionally omitted <==

85 | P a g e

==> picture [425 x 599] intentionally omitted <==

86 | P a g e

==> picture [425 x 594] intentionally omitted <==

87 | P a g e

==> picture [425 x 598] intentionally omitted <==

88 | P a g e

==> picture [425 x 602] intentionally omitted <==

89 | P a g e

==> picture [425 x 603] intentionally omitted <==

90 | P a g e

==> picture [425 x 613] intentionally omitted <==

91 | P a g e

==> picture [425 x 597] intentionally omitted <==

92 | P a g e

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis has been generated for this document yet.