IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION) MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Apr/202627/1 DATED: 23/04/2026

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Apr/202627/1 dated 23/04/2026 of Norms Committee - I for the year 2026-27 was held on 23/04/2026 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Harish Upadhayay,Joint DGFT DGFT(HQ) 2 Ashwani Ojha,Deputy Director DGFT(HQ) 3 Kamlesh Singh,Assistant Section Officer DGFT(HQ) 4 Shaish Kumar,Technical Consultant DGFT 5 Sk Bhatnagar,Technical Consultant DGFT 6 Sushil Jain,Technical Consultant Department for Promotion of Industry & Internal Trade,Ministry of Commerce & Industry 7 Tr Choudhary,Technical Consultant MEITY 8 Vishan Agrawal,Technical Consultant DGFT

UDIN00163075AM27 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director on 17-06-2026 10:11:54.

2 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name BOSCH LIMITED Meeting Number and Date NC/ 1/ MEET/ Apr/ 202627/ 1 and 23/04/2026 HQ File Number HQRNORM REVIW00009055AM24 RA File Number 072404000417 AM11 Licence No and Date 0710076813/19/01/2011

Norms Committee Decision:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 22.04.2026, as under:

S. No. Item of Export Quantity Item of Import & Quantity Applied Wastage to be Allowed 1 Common Rail Injector Parts viz., Valve Set 18,00,000 Nos Valve Piston, F00VC02086 to F00VC02999, F00ZC02002 to F00ZC02999 – Qty: 18,00,000 Nos Net-to-Net under GN-4 with Accountability Clause Steel Bar, 15 DIA – Qty: 72,000.00 Kgs 5% on the net weight of the steel bar in the export product Consumables – Qty: 20,000 Nos 1% of the FOB Value Note: the grade of steel of the imported steel bars should match the grade of steel of the export product. RA concerned may take suitable consequential action accordingly.

Case No. 2 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000108AM27 RA File Number 318304000072 AM12 Licence No and Date 3110049333/21/07/2011 The Committee considered the case as per agenda and decided to call for the following UDIN00163075AM27

REVIW00000108AM27 RA File Number 318304000072 AM12 Licence No and Date 3110049333/21/07/2011 The Committee considered the case as per agenda and decided to call for the following UDIN00163075AM27

3 information as per comments of concerned TE:
1.Kindly submit Review application pertaining to AA No.3110049333, as review application pertaining to AA No.0310789333 has wrongly been uploaded by the applicant instead Case stands deferred.

Case No. 3 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name FITWEL GASKET COMPANY (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number 018305000619AM15 RA File Number 318304000129 AM15 Licence No and Date 3110064779/25/08/2014 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

NO DATA IS AVAILABLE IN THE ATTACHMENT. SUBMIT THE FOLLOWING:
1. (I) APPENDIX 4E
(II) PROCESS FLOW CHART AND WASTAGE, IF ANY, DURING PROCESSING OF IMPORTED INPUT.
(III) HOW THE IMPORTED QUANTITY IS SUFFICIENT FOR THE EXPORT OF 20000 NOS CMP.

E FOLLOWING:
1. (I) APPENDIX 4E
(II) PROCESS FLOW CHART AND WASTAGE, IF ANY, DURING PROCESSING OF IMPORTED INPUT.
(III) HOW THE IMPORTED QUANTITY IS SUFFICIENT FOR THE EXPORT OF 20000 NOS CMP.
(IV) WHAT IS THE FULL FORM OF CMP, AND ALSO THE USES OF THE EXPORT PRODUCT?
(V) WHAT ARE THE INDIGENOUS INPUTS IN THE EXPORT PRODUCT?
(VI) WHAT IS THE WEIGHT OF THE EXPORT PRODUCT?
(VII) WHAT IS THE WEIGHT OF THE IMPORTED AND LOCALLY PROCURED INPUTS?

Case No. 4 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002445AM25 RA File Number 039404001169 AM15 Licence No and Date 0310795103/06/04/2015 UDIN00163075AM27

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of DPIIT dated 13.04.2026, as under: Export items to contain 2101 Nos. of NT250 Heat Exchanger Plates having weight of 11803 Kgs. 1. Quantity of import item at Sl. No. 1 may be allowed as 14209 Kgs. as 1.203 Kgs/Kg content in the export item after taking 1/3rd recovery from the scrap. 2. Quantity of import item at Sl. No. 2 may be allowed on net-to-net basis with accountability clause. 3. 4.

Case No. 5 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017

comments of DPIIT dated 07.05.2026, as under:

Import item at Sl. No.

nd Date HQ File Number HQRNORM REVIW00005243AM25 RA File Number 092404000055 AM18 Licence No and Date 0910065045/15/05/2017

comments of DPIIT dated 07.05.2026, as under:

Import item at Sl. No. 1 shall be of relevant grade and diameter as contained/utilized in the export items at Sl.No. 1 & 2  and its quantity may be allowed as 581.9 Kgs as  2.617 Kgs/Kg content in the export items at Sl. No. 1 & 2 respectively after taking 50% recovery from the scrap.  1. Import item at Sl. No. 2 shall be of relevant grade and thickness as contained/utilized in the export items at Sl.No. 1 & 2  and its quantity may be allowed as 1087.8 Kgs as  3.073 Kgs/Kg content in the export items at Sl. No. 1 & 2 respectively after taking 50% recovery from the scrap.  2. Import item at Sl. No. 3  shall be of relevant grade and thickness as 3. UDIN00163075AM27

5 contained/utilized in the export item at Sl.No. 1  and its quantity may be allowed as 12.06 Kgs as  1.33 Kgs/Kg content in the export item  after taking 50% recovery from the scrap.  Import item at Sl. No. 4  shall be of relevant grade and diameter as contained/utilized in the export items at Sl.No. 1  & 2 and its quantity may be allowed as 1324 Kgs as  4.48 Kgs/Kg content in the export items at SI.No.1 & 2 respectively  after taking 20% recovery from the scrap.  4. Import item at Sl. No. 5 shall be of relevant grade and size as contained/utilized in the export items at Sl.No. 1  & 2 and its quantity may be allowed as 38.2 Kgs. as  3.94 Kgs/Kg content in the export items at SI.No.1 & 2 respectively. 5.

t grade and size as contained/utilized in the export items at Sl.No. 1  & 2 and its quantity may be allowed as 38.2 Kgs. as  3.94 Kgs/Kg content in the export items at SI.No.1 & 2 respectively. 5. Quantity of import item at Sl. No.6  may be allowed as 22.56 Kgs.as  1.09 Kgs/Kg content in the export item at SI.No.1. 6. Import item at Sl. No. 7 shall be of relevant grade and diameter as contained/utilized in the export item at Sl.No. 1 and its quantity may be allowed as 3.245 Kgs as  2.55 Kgs./Kg content in the export item at SI.No.1 after taking 50% recovery from the scrap. 7. Quantity of import items at Sl.No. 8 to 18  may be allowed on net to net basis with accountability clause.. 8.

Case No. 6 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number 018005000276AM18 RA File Number 039504000052 AM18 Licence No and Date 0310815484/01/09/2017 comments of consultant (SKB) dated 11.05.2026, as under:

UDIN00163075AM27

ber and Date HQ File Number 018005000276AM18 RA File Number 039504000052 AM18 Licence No and Date 0310815484/01/09/2017 comments of consultant (SKB) dated 11.05.2026, as under:

UDIN00163075AM27

6 ITEM OF EXPORT: STEAM TURBINE (SECTIONWISE) 1000 MW

QUANTITY: 10 SETS (SECTIONS OF 1 NOS TURBINE).

ITEMS OF IMPORT: FROM SL No 1 TO 339, INDICATED IN THE LIST OF IMPORTED INPUTS.

RECOMMENDATION & QUANTITY TO BE ALLOWED:

QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 48: 13178.80 KGS INCLUSIVE OF 686.80% WASTAGE ON THE NET WEIGHT OF 1675.00 KGS OF 718 NOS TURBINE BLADES GOING IN THE EXPORT PRODUCT.
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 49: 40083.80 KGS INCLUSIVE OF 1145.61% WASTAGE ON THE NET WEIGHT OF 4450.00 KGS OF 1148 NOS TURBINE
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 50: 3117.80 KGS INCLUSIVE OF 642.21% WASTAGE ON THE NET WEIGHT OF 420.00 KGS OF 944 NOS TURBINE
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 51: 6773.00 KGS INCLUSIVE OF 1122.56% WASTAGE ON THE NET WEIGHT OF 554.00 KGS OF 224 NOS TURBINE
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 52: 11398.50 KGS INCLUSIVE OF 576.87% WASTAGE ON THE NET WEIGHT OF 1684.00 KGS OF 1180 NOS TURBINE
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 53: 11222.10 KGS INCLUSIVE OF 570.38% WASTAGE ON THE NET WEIGHT OF 1674.00 KGS OF 1168 NOS TURBINE
QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 85: 12265.00 KGS INCLUSIVE OF 480.45% WASTAGE ON THE NET WEIGHT OF 2113.00 KGS OF 1098 NOS TURBINE

E NET WEIGHT OF 1674.00 KGS OF 1168 NOS TURBINE 7. QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 85: 12265.00 KGS INCLUSIVE OF 480.45% WASTAGE ON THE NET WEIGHT OF 2113.00 KGS OF 1098 NOS TURBINE 8. QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 86: 45045.10 KGS INCLUSIVE OF 471.27% WASTAGE ON THE NET WEIGHT OF 7885.00 KGS OF 1308 NOS TURBINE UDIN00163075AM27

7 9. QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 87: 2980.90 KGS INCLUSIVE OF 359.30% WASTAGE ON THE NET WEIGHT OF 649.00 KGS OF 408 NOS TURBINE 10. QUANTITY & WASTAGE TO BE ALLOWED AT SL NO 88: 2841.00 KGS INCLUSIVE OF 359.30% WASTAGE ON THE NET WEIGHT OF 649.00 KGS OF 408 NOS TURBINE 11. ITEMS AT SL No 33,39,68,76,117,208 & 318 WILL BE ALLOWED ON NET-TO-NET BASIS UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.
12. THE FOLLOWING REMAINING ITEMS OF IMPORTS AND CLAUSES THEREOF WILL BE ALLOWED ACCORDING TO THE APPROVAL OF THE NORMS COMMITTEE IN ITS MEETING HELD ON NC/1/MEET/MAR/2021-22/16 (OFFLINE CASES) DATED 31.03.2022: (I). THE WEIGHT OF THE EXPORT PRODUCT WILL REMAIN THE SAME AS INDICATED AT SL No 1, i.e., 1600.00 MTS. (II) QUANTITY OF IMPORT ITEMS AT SL No 13,22,79 TO 82, 327,328 & 329 WILL BE ALLOWED AS 1.05 KG/KG CONTENT IN THE EXPORT PRODUCT.
(III) IMPORT ITEM AT SL No 208 WILL BE DELETED AS IT IS A KIT.
(IV) FOR IMPORT ITEMS AT SL No 319, 322 & 323, THE WORD FROM DESCRIPTION “ROUGH MACHINING” WILL BE REPLACED WITH THE WORD “FINISHED MACHINING”
V) IMPORT ITEM AT SL No 333 WILL BE DELETED AS THE APPLICANT HAS NOT SUBMITTED DRAWING AND CALCULATION OF THE IMPORT ITEM.

N “ROUGH MACHINING” WILL BE REPLACED WITH THE WORD “FINISHED MACHINING”
V) IMPORT ITEM AT SL No 333 WILL BE DELETED AS THE APPLICANT HAS NOT SUBMITTED DRAWING AND CALCULATION OF THE IMPORT ITEM. (VI) QUANTITY OF IMPORT AT SL No 330 WILL BE ALLOWED AS PER DGFT’S POLICY OF CONSUMABLE ITEM. (VII) THE QUANTITY OF THE REMAINING IMPORTED ITEMS WILL BE ALLOWED AS PER GN-4 WITH NIL WASTAGE & ACCOUNTABILITY CLAUSE (WEIGHT OF COMPONENTS GIVEN IN WEIGHT BALANCE ARE TO BE INCORPORATED IN ADVANCE AUTHORIZATION).

NOTE: THE GRADE OF IMPORTED ALLOY STEEL SHOULD BE MATCHED WITH THE GRADE OF ALLOY STEEL OF THE EXPORT PRODUCT.

UDIN00163075AM27

Case No. 7 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name TAKRAF INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006385AM26 RA File Number 072404000187 AM18 Licence No and Date 0710112252/10/10/2017 The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of norms against AA No. 710112252 dated 10/10/2017 was earlier rejected by NC-1 on 19/03/2024 due to non-submission of the reply of deficiency letter. On 12/03/2026, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website.

for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website. The para 4.17 of current HBP stipulates that no representation against the decision of Norms Committee after the period of 12 months from the date of uploading of the decision on DGFT website will be entertained. Accordingly, the case stands rejected.

Case No. 8 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006268AM26 RA File Number 042404000237 AM18 Licence No and Date 0410164128/22/03/2018 As per preliminary assessment, the submitted application does not have any information /data/ details for the evaluation of the case. Applicant needs to submit the application with all requisite details /information with supporting documents for further consideration.

Case No. 9 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002443AM25 RA File Number 039404001130 AM19 UDIN00163075AM27

ET/Apr/202627/1 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002443AM25 RA File Number 039404001130 AM19 UDIN00163075AM27

9 Licence No and Date 0310828077/02/04/2019 Case deferred for the DL reply of the firm.

Case No. 10 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name LOTUS ADVANCE TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000659AM26 RA File Number 052304000283 AM20 Licence No and Date 0510412171/17/10/2019 Case deferred for the comments of TE.

Case No. 11 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name KELVION INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002444AM25 RA File Number 039404000474 AM20 Licence No and Date 0310833455/17/12/2019 Case deferred for the DL reply of the firm.

Case No. 12 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004040AM26 RA File Number 052404000361 AM21 Licence No and Date 0510415541/19/10/2020 UDIN00163075AM27

Name MICRON INSTRUMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004040AM26 RA File Number 052404000361 AM21 Licence No and Date 0510415541/19/10/2020 UDIN00163075AM27

10 1.Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
5. The above information may be furnished export product wise.

Case No. 13 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005049AM25 RA File Number 092404000334 AM21 Licence No and Date 0910069412/29/10/2020 1.

e Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005049AM25 RA File Number 092404000334 AM21 Licence No and Date 0910069412/29/10/2020

Submit a coloured photograph of each export product and indicate the initial of the raw material & final dimensions of the product.
What is the weight of each export product, indicated in numbers?
Submit a process flow chart and also indicate the wastage at each stage of operation.
Submit a Bill of Entry of the imported inputs to verify the CIF cost indicated in the summary detail on the portal. 5.Submit a copy of the shipping bills to verify the description of the export products as per the details given in the AA. UDIN00163075AM27

11 Case stands deferred

Case No. 14 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00039048AM21 RA File Number 342404000170 AM21 Licence No and Date 3411000017/15/12/2020 comments of DPIIT dated 04.05.2026, as under:

 Description of the export item may be modified as "Optical Ground Wire (OPGW) 24F ITU G 652B/Aluminium Tube 7.90mm + Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e. Aluminium Ingots  may be allowed as 11.08 MT as  1.02 Kgs/Kg content in the export item. 2. Quantity of import item at Sl.No.2  (i.e. Aluminium Clad  Steel Wire 10/3.40mm (20.3% IACS) may be allowed as 91.14 MT as 1.01 Kgs/Kg content in the export item. 3. Quantity of import item at Sl.

Quantity of import item at Sl.No.2  (i.e. Aluminium Clad  Steel Wire 10/3.40mm (20.3% IACS) may be allowed as 91.14 MT as 1.01 Kgs/Kg content in the export item. 3. Quantity of import item at Sl. No.3  i.e. Aluminium Ingots  may be allowed as 10.63 MT as  1.02 Kgs/Kg content in the export item. 4. Quantity of import item at Sl. No.4  i.e. Optical Fibre Core may be allowed as 166.65 Kms (2.66 MT)  inclusive of 1 % wastage. 5.

Case No. 15 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name EMPIRE HOME APPLIANCES PRIVATE LIMITED Meeting Number UDIN00163075AM27

12 and Date HQ File Number HQRNORM APPLY 00103868AM21 RA File Number 05AA04038867 AM21 Licence No and Date 0511001740/15/03/2021 Case deferred for the DL reply of the firm.

Case No. 16 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name STERLITE TECHNOLOGIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006906AM22 RA File Number 03AA04000708 AM22 Licence No and Date 0311003091/08/04/2021 Case deferred for the comments of TE.

Case No. 17 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005053AM25 RA File Number 09AA04002060 AM22 Licence No and Date 0911001045/15/06/2021 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 12.05.2026, as under:

Sl.

ence No and Date 0911001045/15/06/2021 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 12.05.2026, as under:

Sl. No. Export Item Quantity Import Item & Quantity Applied Quantity to be Allowed 1 COOLANT RESERVOIR ASSEMBLY {Exported through Defence NOC No. EA/2021/1967- D(EPC), Dated: 16.03.2021} 803 Nos STAINLESS STEEL TUBE, Grade: SS304, Pipe Standard: ASTM-A-312, Tube O.D.: 73.025 mm (2.875"), Tube I.D.: 62.7126 mm, Qty: 3694.00 Kgs 1813.32 Kgs inclusive of 178.80% wastage on the net content of stainless-steel tube in the export product UDIN00163075AM27

13 STAINLESS STEEL ROD, Grade: SS304, Rod Diameter: 76.2 mm, Standard: ASTM-A-276, Qty: 7620.00 Kgs 2816.90 Kgs inclusive of 285.49% wastage on the net content of stainless-steel rod in the export product HEXAGONAL BAR CRES HEX BAR, Type: 303, Condition: A IAW QQ-S- 763, Qty: 160.60 Kgs 120.65 Kgs inclusive of 501% wastage on the net content of the hexagonal bar in the export product SCREW SELF SEALING, Part No. 11509851, Qty: 1000 Nos VALVE CHECK, Part No. 481- 200222, Qty: 1000 Nos INDICATOR PRESS, Part No. 481- 200194, Qty: 1000 Nos PLUG BLOWOUT, Part No. 481- 200200, Qty: 1000 Nos COUPLING HALF QUICK, Part No. 481-200523, Qty: 1000 Nos O-RING, Part No. MS28778-4, Qty: 1000 Nos O-RING, Part No. MS28778-5, Qty: 1000 Nos O-RING, Part No. MS28778-6, Qty: 1000 Nos WASHER SS, Part No. NAS620C8, Qty: 1000 Nos SCREW HD SCREW SS, Part No.

RING, Part No. MS28778-4, Qty: 1000 Nos O-RING, Part No. MS28778-5, Qty: 1000 Nos O-RING, Part No. MS28778-6, Qty: 1000 Nos WASHER SS, Part No. NAS620C8, Qty: 1000 Nos SCREW HD SCREW SS, Part No. MS16995-25, Qty: 1000 Nos NOTE: THE GRADE OF IMPORTED STAINLESS-STEEL TUBES, BARS, AND RODS SHOULD MATCH THE GRADE OF STAINLESS-STEEL TUBES, RODS AND BARS GOING IN THE EXPORT PRODUCT.
RA concerned may take suitable consequential action accordingly

UDIN00163075AM27

14 Case No. 18 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name IND SPHINX PRECISION LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00133864AM22 RA File Number 30AA04003554 AM22 Licence No and Date 3011000861/08/07/2021 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of (SKB)
dated 22.04.2026, as under: Sl. No. Item of Export Quantity Item of Imports Quantity and Value to be Allowed 1 PCB DRILL MADE FROM A COMPOSITE BLANK OF TUNGSTEN CARBIDE, DIA 3.20 MM TO 6.50 MM 100000 Nos TUNGSTEN CARBIDE SHANK, Dia 3.25 ± 0.20 mm, Length 25 ± 2.00 mm Net-to-Net under GN-4 with Accountability Clause TUNGSTEN CARBIDE PIN, Dia 5.25 ± 1.50 mm and Length 13 ± 2.00 mm Net-to-Net under GN-4 with Accountability Clause DIAMOND GRINDING WHEEL, B MARKING SOLUTION, C ULTRASONIC SOLUTION 5% of the FOB Value

Case No. 19 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name MENON BEARINGS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00135493AM22 RA File Number 03AA04029067 AM22 Licence No and Date

/MEET/Apr/202627/1 Case Status Case Deferred Party Name MENON BEARINGS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00135493AM22 RA File Number 03AA04029067 AM22 Licence No and Date 0311005250/09/07/2021 UDIN00163075AM27

15 1.Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 4. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 5. The above information may be furnished export product wise.

Case No. 20 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006411AM25 RA File Number 05AA04057692 AM22 Licence No and Date 0511003764/22/07/2021 comments of DPIIT dated 06.04.2026, as under: Net fabricated weight of export items at SI.No.

ber HQRNORM REVIW00006411AM25 RA File Number 05AA04057692 AM22 Licence No and Date 0511003764/22/07/2021 comments of DPIIT dated 06.04.2026, as under: Net fabricated weight of export items at SI.No. 1 to 4 may be specified as 140 MT , 140 MT , 253.1 MT & 84.5 MT respectively. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export itemat SI.No.1 and its quantity may be allowed as applied for i.e 77229.60 Kgs as 1.05 Kgs/Kg content in the export item.
2. Quantity of import item at Sl.No. 2 may be allowed as 31 Nos. On net to net basis in the export item at SI.No.1 However, duty free weight of this item may be allowed as 42361.73 Kgs inclusive of 1.45 % wastage as claimed by the firm.. 3. Import items at SI.No.3 & 4 may be omitted as not imported by the firm. 4. UDIN00163075AM27

16 Quantity of import items at Sl.No. 5 to 12 (Welding Consumables) may be allowed as 'Nil', 650 Kgs , 500 Kgs , 7000 Kgs , 2500 Kgs , 4000 Kgs , 2800 Kgs & 1500 Kgs respectively. 5. Quantities of import items at Sl.No.13 & 14 may be allowed as applied for being less than 1% of FOB value in export item at SI.No.1. 6. Quantity of import item at Sl.No.14 may be allowed as applied for i.e 150 Kgs. Being less than 1% of FOB value in export item at SI.No.1. 7. Import item at Sl.No.15 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as applied for i.e 77229.60 Kgs. As 1.05 Kgs/Kg content in the export item. 8.

elevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as applied for i.e 77229.60 Kgs. As 1.05 Kgs/Kg content in the export item. 8. Quantity of import item at Sl.No.16 may be alllowed as 31 Nos. On net to net basis in the export item at SI.No.2. However, duty free weight of this item may be allowed as 42361.73 Kgs inclusive of 1.45 % wastage as claimed by the firm. 9. Import items at SI.No.17 & 18 may be omitted as not imported by the firm. 10. Quantity of import items at Sl.No. 19 to 26 (Welding Consumables) may be allowed as 'Nil', 550 Kgs , 2450 Kgs , 7000 Kgs , 2000 Kgs , 4000 Kgs , 2800 Kgs & 1500 Kgs respectively. 11. Quantities of import items at Sl.No.27& 28 may be allowed as applied for being less than 1% of FOB value in export item at SI.No.2. 12. Import item at Sl.No.29 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as applied for i.e.169876.35 Kgs. As 1.0487 Kgs/Kg content in the export item. 13. Quantity of import item at Sl.No.30 may be allowed as 30 Nos. On net to net basis. However, duty free weight of this item may be allowed as 49446 Kgs inclusive of 0.73 % wastage as claimed by the firm. 14. Import items at SI.No.31 & 32 may be omitted as not imported by the firm. 15. Quantity of import items at Sl.No. 33 to 40 (Welding Consumables) may be allowed as 'Nil', 550 Kgs , 3000 Kgs , 10800 Kgs , 3290 Kgs , 6000 Kgs , 3500 Kgs & 2000 Kgs respectively. 16.

e firm. 15. Quantity of import items at Sl.No. 33 to 40 (Welding Consumables) may be allowed as 'Nil', 550 Kgs , 3000 Kgs , 10800 Kgs , 3290 Kgs , 6000 Kgs , 3500 Kgs & 2000 Kgs respectively. 16. Quantities of import items at Sl.No.41 & 42may be allowed as applied for being less than 1% of FOB value in export item at SI.No.3. 17. Import item at Sl.No.43 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.4 and its quantity may be allowed as applied for i.e 57480.15 Kgs. As 1.0494 Kgs/Kg content in the export item as claimed by the firm. 18. Quantity of import item at Sl.No.44 may be allowed as 25 Nos. On net to net basis. However, duty free weight of this item may be allowed as 10638 Kgs inclusive of 1.24 % wastage as claimed by the firm. 19. Import items at SI.No.45 & 46 may be omitted as not imported by the firm. 20. Quantity of import items at Sl.No. 47 to 50(Welding Consumables) may be allowed as,Nil., 2000 Kgs , 2000 & 1500 Kgs respectively. 21. Quantities of import items at Sl.No.51 & 52 may be allowed as applied for being less than 1% of FOB value in export item at SI.No.4 22. UDIN00163075AM27

Kgs , 2000 & 1500 Kgs respectively. 21. Quantities of import items at Sl.No.51 & 52 may be allowed as applied for being less than 1% of FOB value in export item at SI.No.4 22. UDIN00163075AM27

Case No. 21 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name PJB PROJECTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00152616AM22 RA File Number 07AA04011880 AM22 Licence No and Date 0711001629/02/08/2021 SUBMIT COLOURED DRAWING OF THE EXPORT PRODUCTS AND INDICATE THE POSITION OF THE IMPORTED ITEM IN NUMBERS AND TUBES TO BE IMPORTED IN METERS. a. ANNEXURE OF APPENDIX 4E IS NOT READABLE. SUBMIT REVISED APPENDIX 4E. b. SUBMIT PROCESS FLOW CHART AND WASTAGE CLAIMED ON IMPORTED STAINLESS-STEEL TUBES IN EACH OF THE EXPORT PRODUCTS. c. WHERE IS THE APPLICATION OF THE EXPORT PRODUCTS? d. SUBMIT A DETAIL NOTE ON THE MANUFACTURING ACTIVITIES INVOLVED. e. WHAT ARE THE INDIGENOUS MATERIALS TO BE USED IN THE EXPORT PRODUCT, AND WEIGHT IN THE TOTAL WEIGHT OF THE EXPORT PRODUCT? f. Case stands deferred

Case No. 22 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name YAMAHA MUSIC INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00153346AM22 RA File Number 05AA04061551 AM22 Licence No and Date 0511003976/03/08/2021 comments of consultant (SKB) dated 24.04.2026, as under: UDIN00163075AM27

Date HQ File Number HQRNORM APPLY 00153346AM22 RA File Number 05AA04061551 AM22 Licence No and Date 0511003976/03/08/2021 comments of consultant (SKB) dated 24.04.2026, as under: UDIN00163075AM27

EXPORT ITEM: ACOUSTIC GUITAR, F310 NT//EX & F310 TBS//EX (ACOUSTIC GUITAR) QTY: 64968 NOS ITEMS OF IMPORT:

ITEMS OF IMPORT AT SL No 1, 4, 12,13, 14,15,16,17,18,19,20,22, 23,25, 26, 27,28.29,30,31 & 32: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.
ITEM OF IMPORT AT SL No 24: 1.01 KG/KG 0N THE NET WEIGHT OF WIRE IN THE EXPORT PRODUCT.
ITEMS OF IMPORT IN GRAMS AT SL No 2,3,5,6, 9,10 & 11: 0.08% OF THE FOB VALUE.
ITEMS OF IMPORT IN MTRS AT SL No 7, 8, 21: AS APPLIED.

Case No. 23 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name VEM TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005051AM25 RA File Number 09AA04017807 AM22 Licence No and Date 0911001893/22/11/2021

Submit a coloured photograph of each export product and indicate the initial of the raw material & final dimensions of the product.
What is the weight of each export product indicated in numbers?
Submit a process flow chart and also indicate the wastage at each stage of operation.
Submit a Bill of Entry of the imported inputs to verify the CIF cost indicated in the summary detail on the portal.
Submit a copy of the shipping bills to verify the description of the export products as per the details given in the AA. UDIN00163075AM27

CIF cost indicated in the summary detail on the portal. 5. Submit a copy of the shipping bills to verify the description of the export products as per the details given in the AA. UDIN00163075AM27

Case No. 24 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004588AM26 RA File Number 05AA040102749 AM22 Licence No and Date 0511006453/26/11/2021 comments of DPIIT dated 16.04.2026, as under: Net weight of export item may be specified as 190 MT. 1. Import item at Sl.No.1 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 6047 Kgs. (323 Mtrs) as 1.02 Kgs/Kg content in the export item as claimed by the firm. 2. Import item at Sl.No.2 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 5724 Kgs. (138 Mtrs) as 1.02 Kgs/Kg content in the export item as claimed by the firm. 3. Import item at Sl.No.3 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 42849 Kgs. (340 Mtrs ) as 1.02 Kgs/Kg content in the export item as claimed by the firm. 4. Import item at Sl.No.4 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 12528 Kgs. (3256 Mtrs ) as 1.02 Kgs/Kg 5. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 710 Kgs.

wed as 12528 Kgs. (3256 Mtrs ) as 1.02 Kgs/Kg 5. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 710 Kgs. (10 Mtrs ) as 1.02 Kgs/Kg content in the export item as claimed by the firm. 6. Import item at Sl.No.6 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 55163 Kgs. (256 Mtrs ) as 1.02 Kgs/Kg 7.

Case No. 25 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name L&T - MHI POWER BOILERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005443AM26 RA File Number 03AX04000286 AM22 Licence No and 0311010309/10/01/2022 UDIN00163075AM27

20 Date The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Tech-3 dated 21.04.2026, as under: EP 1 to 9 – Add: “Total wt. – 895793 Kgs.” Import: Tubes & Pipes – Net content in EP + 2% wastage. 1. Finned Tubes – Net-to-Net as per GN-4 in Nos. & Weight. 2. Membrane Fins – Net content in EP + 2% wastage. 3. Structural Sections – Net content in EP + 2% wastage. 4. Fittings – Net-to-Net as per GN-4 in Nos. & Weight. 5. Welding Consumables – Up to 1.3% of FOB Value. 6. Conditions: (i) Diameter of imported tubes & pipes shall be the same as used in the export product.

– Net-to-Net as per GN-4 in Nos. & Weight. 5. Welding Consumables – Up to 1.3% of FOB Value. 6. Conditions: (i) Diameter of imported tubes & pipes shall be the same as used in the export product. (ii) Grade of imported items shall be the same as used in the export product.

Case No. 26 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006199AM25 RA File Number 04AX04000084 AM23 Licence No and Date 0411003261/09/05/2022 comments of DPIIT dated 08.05.2026, as under: Net weight of export item may be specified as 821.944 MT. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item. Quantity of the import item may be modified as 42,545 Kgs and may be allowed as 1.05 Kgs/Kg content in the export item. 2. Quantity of import item at SI. No. 2 may be allowed as 170 Nos.(1664 Kgs.) On net to net basis with accountability clause. 3. Quantity of import item at SI. No. 3 may be allowed as 468 Kgs on net to net basis with accountability clause. 4. Quantity of import item at SI. No. 4 may be allowed as 90 pieces(360 Kgs.) On net to net 5. UDIN00163075AM27

No. 3 may be allowed as 468 Kgs on net to net basis with accountability clause. 4. Quantity of import item at SI. No. 4 may be allowed as 90 pieces(360 Kgs.) On net to net 5. UDIN00163075AM27

21 Import item at SI.No. 5 may be omitted as not imported by the firm. 6. Quantity of import item at SI. No. 6 may be allowed as 23 Nos.(3528 Kgs.) On net to net 7. Quantity of import item at SI. No. 7 may be allowed as 50 pieces(143 Kgs.) On net to net 8. Import items at SI.No. 8 to 11 may be omitted as not imported by the firm. 9. Import item at Sl.No.12 shall be of relevant grade and size as contained/utilized in the export item. Quantity of the import item may be modified as 480,019 Kgs and may be allowed as 1.02 Kgs/Kg content in the export item. 10.

Case No. 27 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name TEGA INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006400AM26 RA File Number 02AX04000191 AM23 Licence No and Date 0211002671/06/07/2022 The Committee considered the case as per agenda and noted that in the instant case, the request of the firm for ratification of norms against AA No. 211002671 dated 06/07/2022 was earlier rejected by NC-1 on 28/01/2025 due to non-submission of the reply of deficiency letter. On 12/03/2026, the firm has filed application on portal for review of the said decision. It is quite evident that the firm has filed the present review application after the period of 12 months from the date of uploading of the decision on DGFT website.

Case No. 28 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005672AM26 RA File Number 05AX04000241 AM24 Licence No and Date 0511018607/01/05/2023 comments of consultant (SKB) dated 11.05.2026, as under:

UDIN00163075AM27

22 SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED FINISH MACHINED FORGING CONF. TO SPECN. SA-336 F22 CL.3(0)

QTY: 58093.20 KGS 1.032 KG/KG ON THE NET WEIGHT OF LOW ALLOY STEEL PLATE IN THE EXPORT PRODUCT.

SAW WIRE EB3R 4.0MM (0) QTY: 4400.00 KGS 1 COLD EXCHANGER TAG NO. 261-E-402 / 262-E-402 (PART OF HEAT EXCHANGER)

TOTAL WEIGHT: 124400.00 KGS WEIGHT OF IMPORTED INPUT: 55390.00 KGS WEIGHT OF INDIGENOUS INPUT: 69010.00 KGS 2 NOS SAW FLUX F9P4 FOR EB3R (UV420TTR-W)(0) QTY: 4400.00 KGS

5% OF THE FOB VALUE

LOW ALLOY STEEL PLATE CONFORMING TO SPECN. SA387GR.22 CL2(0) QTY: 41524.00 KGS 1.032 KG/KG ON THE NET WEIGHT OF LOW ALLOY STEEL PLATE IN THE EXPORT PRODUCT.
FINISH MACHINED FORGING CONF. TO SPECN.

Y STEEL PLATE CONFORMING TO SPECN. SA387GR.22 CL2(0) QTY: 41524.00 KGS 1.032 KG/KG ON THE NET WEIGHT OF LOW ALLOY STEEL PLATE IN THE EXPORT PRODUCT.
FINISH MACHINED FORGING CONF. TO SPECN. SA-336 F22 CL.3(0) QTY: 58020.00 KGS 1.032 KG/KG ON THE NET WEIGHT OF FINISHED MACHINED FORGING IN THE EXPORT PRODUCT.
SAW WIRE EB3R 4.0 MM (0) QTY: 3600.00 KGS

5% OF THE FOB VALUE 2 IST AMMONIA CHILLER TAG NO. 261-E-403 / 262-E-403 (PART OF HEAT EXCHANGER)

TOTAL WEIGHT: 154321.00 KGS WEIGHT OF IMPORTED INPUT: 95032.00 KGS WEIGHT OF INDIGENOUS INPUT: 59289 .00 KGS 2 NOS UDIN00163075AM27

23 SAW FLUX F9P4 FOR EB3R (UV420TTR-W)(0) QTY: 3600.00 KGS

FINISH MACHINED FORGING CONF. TO SPECN. SA-336 F22 CL.3(0) QTY: 37560.00 KGS 1.032 KG/KG ON THE NET WEIGHT OF FINISHED MACHINED FORGING IN THE EXPORT PRODUCT.
SAW WIRE EB3R 4.0MM (0) QTY: 1200.00 KGS 3 2ND AMMONIA CHILLER TAG NO. 261-E-404 / 262-E-404 (PART OF HEAT EXCHANGER)

TOTAL WEIGHT: 162470.00 KGS WEIGHT OF IMPORTED INPUT: 35856.00 KGS WEIGHT OF INDIGENOUS INPUT: 126614 .00 KGS 2 NOS SAW FLUX F9P4 FOR EB3R (UV420TTR-W) (0) QTY: 1200.00 KGS

1.5% OF THE FOB VALUE

Case No. 29 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name WINTAGE ENGINEERS & CONSULTANTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001092AM24 RA File Number 05AX04000400 AM24 Licence No and Date 0511018980/25/05/2023 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. UDIN00163075AM27

e Number 05AX04000400 AM24 Licence No and Date 0511018980/25/05/2023 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. UDIN00163075AM27

24 Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

s, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 30 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ZTT INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00001144AM24 RA File Number 04AX04000129 AM24 Licence No and Date 0411005475/26/05/2023 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Meity, as under: Sl.no. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 2000 Single Mode Optical Fibre G657A1 (Natural) 47,882.057 KM 2000 High Density Polyethelene (HDPE) HE6133 18,102.631 KG 2000 Polybutylene Terephthalate (PBT)-JD-3019 7,923.515 KG 2000 Filling Gel- LT-410-A 2,548.650 KG 1 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-MLT 2000 KME Fiberglass Reinforced Plastic (FRP)-1.9mm 11,537.553 KM UDIN00163075AM27

19 7,923.515 KG 2000 Filling Gel- LT-410-A 2,548.650 KG 1 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-MLT 2000 KME Fiberglass Reinforced Plastic (FRP)-1.9mm 11,537.553 KM UDIN00163075AM27

25 1000 Single Mode Optical Fibre G657A1 (Natural) 48,449.829 KM 1000 High Density Polyethelene (HDPE) HE6133 9,051.316 KG 1000 Polybutylene Terephthalate (PBT)-JD-3019 7,939.612 KG 1000 2,560.005 KG 2 OPTICAL FIBER CABLE-MINI- UNARMOURED- 48F-MLT 1000 KME Plastic (FRP)-1.9mm 5,768.777 KM 750 Single Mode Optical Fibre G657A1 (Natural) 74,378.057 KM 750 High Density Polyethelene (HDPE) HE6133 10,066.683 KG 750 Polybutylene Terephthalate (PBT)-JD-3019 7,071.990 KG 750 2,108.661 KG 3 OPTICAL FIBER CABLE-MINI- UNARMOURED- 96F-MLT 750 KME Plastic (FRP)-1.9mm 6,349.560 KM 375 Single Mode Optical Fibre G657A1 (Natural) 56,616.570 KG 375 High Density Polyethelene (HDPE) HE6133 5,033.346 KG 375 Polybutylene Terephthalate (PBT)-JD-3019 5,320.437 KG 375 1,584.457 KG 4 OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-MLT 375 KME Plastic (FRP)-1.9mm 3,174.785 KM UDIN00163075AM27

KG 375 Polybutylene Terephthalate (PBT)-JD-3019 5,320.437 KG 375 1,584.457 KG 4 OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-MLT 375 KME Plastic (FRP)-1.9mm 3,174.785 KM UDIN00163075AM27

26 2500 Single Mode Optical Fibre G652D (Natural) 29,748.857 KG 2500 High Density Polyethelene (HDPE) 6062 27,755.919 KG 2500 Polybutylene Terephthalate (PBT)-JD-3019 4,935.003 KG 2500 1,640.655 KG 5 OPTICAL FIBRE CABLE-DROP FLAT-12F-UT 2500 KME Plastic (FRP)-1.9mm 23,140.579 KM

Case No. 31 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ZTT INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00001145AM24 RA File Number 04AX04000132 AM24 Licence No and Date 0411005476/26/05/2023 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of Meity, as under: Sl.no. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 2000 Single Mode Optical Fibre G657A1 (Natural) 47,882.057 KM 2000 High Density Polyethelene (HDPE) HE6133 18,102.631 KG 2000 Polybutylene Terephthalate (PBT)- JD-3019 7,923.515 KG 1 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-MLT KME UDIN00163075AM27

2000 High Density Polyethelene (HDPE) HE6133 18,102.631 KG 2000 Polybutylene Terephthalate (PBT)- JD-3019 7,923.515 KG 1 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-MLT KME UDIN00163075AM27

27 2000 2,548.650 KG 2000 Plastic (FRP)-1.9mm 11,537.553 KM 1000 Single Mode Optical Fibre G657A1 (Natural) 48,449.829 KM 1000 High Density Polyethelene (HDPE) HE6133 9,051.316 KG 1000 Polybutylene Terephthalate (PBT)- JD-3019 7,939.612 KG 1000 2,560.005 KG 2 OPTICAL FIBER CABLE-MINI- UNARMOURED- 48F-MLT 1000 KME Plastic (FRP)-1.9mm 5,768.777 KM 750 Single Mode Optical Fibre G657A1 (Natural) 74,378.057 KM 750 High Density Polyethelene (HDPE) HE6133 10,066.683 KG 750 Polybutylene Terephthalate (PBT)- JD-3019 7,071.990 KG 750 2,108.661 KG 3 OPTICAL FIBER CABLE-MINI- UNARMOURED- 96F-MLT 750 KME Plastic (FRP)-1.9mm 6,349.560 KM 375 Single Mode Optical Fibre G657A1 (Natural) 56,616.570 KG OPTICAL FIBER CABLE-MINI- UNARMOURED- 4 KME UDIN00163075AM27

-MINI- UNARMOURED- 96F-MLT 750 KME Plastic (FRP)-1.9mm 6,349.560 KM 375 Single Mode Optical Fibre G657A1 (Natural) 56,616.570 KG OPTICAL FIBER CABLE-MINI- UNARMOURED- 4 KME UDIN00163075AM27

28 375 High Density Polyethelene (HDPE) HE6133 5,033.346 KG 375 Polybutylene Terephthalate (PBT)- JD-3019 5,320.437 KG 375 1,584.457 KG 144F-MLT 375 Plastic (FRP)-1.9mm 3,174.785 KM 2500 Single Mode Optical Fibre G652D (Natural) 29,748.857 KG 2500 High Density Polyethelene (HDPE) 6062 27,755.919 KG 2500 Polybutylene Terephthalate (PBT)- JD-3019 4,935.003 KG 2500 1,640.655 KG 5 OPTICAL FIBRE CABLE-DROP FLAT-12F-UT 2500 KME Plastic (FRP)-1.9mm 23,140.579 KM

Case No. 32 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name P P ROLLING MILLS MFGING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001184AM24 RA File Number 05AX04000559 AM24 Licence No and Date 0511019098/30/05/2023 UDIN00163075AM27

G MILLS MFGING COMPANY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001184AM24 RA File Number 05AX04000559 AM24 Licence No and Date 0511019098/30/05/2023 UDIN00163075AM27

29 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 33 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name OSWAL PUMPS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005945AM26 RA File Number 33AX04000024 AM24 Licence No and Date 3311001265/07/06/2023

Quantities of export items in Nos. In addition to their weights.
Weight of each Export Product.

REVIW00005945AM26 RA File Number 33AX04000024 AM24 Licence No and Date 3311001265/07/06/2023

Quantities of export items in Nos. In addition to their weights.
Weight of each Export Product.
Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing UDIN00163075AM27

30 with complete justification and supported by documentary evidence/drawings etc. 5. The above information may be furnished export product wise.

Case No. 34 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name L&T - MHI POWER TURBINE GENERATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001449AM24 RA File Number 03AX04001091 AM24 Licence No and Date 0311024415/09/06/2023

SUBMIT A PROCESS FLOW CHART INDICATING STAGE-WISE WASTAGE ON EACH OPERATION UPTO THE FINAL STAGE OF OPERATION.

9AM24 RA File Number 03AX04001091 AM24 Licence No and Date 0311024415/09/06/2023

SUBMIT A PROCESS FLOW CHART INDICATING STAGE-WISE WASTAGE ON EACH OPERATION UPTO THE FINAL STAGE OF OPERATION.
SUBMIT A CHART INDICATING THE NUMBER OF PROCESSES INVOLVED, THE PERCENTAGE WEIGHT IN KG (BEFORE), THE CUTTING WEIGHT IN KG (AFTER), THE WASTAGE IN KG, AND THE WASTAGE IN PERCENTAGE.
COLOURED DRAWINGS OF THE TURBINE BLADES WITH DIMENSIONS OF THE INITIAL STAINLESS-STEEL BAR AND DIMENSIONS OF THE FINISHED PRODUCTS.
MILL TEST CERTIFICATE OF THE GRADES AND CHEMICAL COMPOSITION OF THE IMPORTED STAINLESS-STEEL BARS.
ALL DOCUMENTS MUST BE CERTIFIED BY THE CE.

Case No. 35 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name RAGHU VAMSI MACHINE TOOLS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004967AM25 RA File Number 09AX04000204 AM24 UDIN00163075AM27

31 Licence No and Date 0911005234/20/06/2023 comments of Tech-3 dated 21.04.2026, as under: Import - 6373 kg.

File Number HQRNORM REVIW00004967AM25 RA File Number 09AX04000204 AM24 UDIN00163075AM27

31 Licence No and Date 0911005234/20/06/2023 comments of Tech-3 dated 21.04.2026, as under: Import - 6373 kg. Including 530% wastage Grade of item of import will be same as used in EP

Case No. 36 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name Vishakha Industries Meeting Number and Date HQ File Number HQRNORM APPLY 00002003AM24 RA File Number 07AX04000399 AM24 Licence No and Date 0711008343/21/06/2023 Case deferred for the DL reply of the firm.

Case No. 37 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002907AM24 RA File Number 34AX04000010 AM23 Licence No and Date 3411003841/28/06/2023 comments of DPIIT dated 04.05.2026, as under: Description of the export item may be modified as "Optical Ground Wire (OPGW) 24F ITU G 652B/Aluminium Tube 7.90mm+ Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e. Aluminium Ingots may be allowed as 11.08 MT as
2. UDIN00163075AM27

U G 652B/Aluminium Tube 7.90mm+ Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e. Aluminium Ingots may be allowed as 11.08 MT as
2. UDIN00163075AM27

32 1.02 Kgs/Kg content in the export item. Quantity of import item at Sl.No.2 (i.e. Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS) may be allowed as 91.14 MT as 1.01 Kgs/Kg content in the export item. 3. Quantity of import item at Sl. No.3 i.e. Aluminium Ingots may be allowed as 10.63 MT as
4. Quantity of import item at Sl. No.4 i.e. Optical Fibre Core may be allowed as 166.65 Kms(2.66 MT) inclusive of 1 % wastage. 5.

Case No. 38 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005014AM24 RA File Number 34AX04000208 AM24 Licence No and Date 3411004021/11/08/2023 comments of DPIIT dated 04.05.2026, as under: Description of the export item may be modified as "Optical Ground Wire (OPGW) 24F ITU G 652B/Aluminium Tube 7.90mm+ Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e. Aluminium Ingots may be allowed as 11.08 MT as
2. Quantity of import item at Sl.No.2 (i.e. Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS) may be allowed as 91.14 MT as 1.01 Kgs/Kg content in the export item. 3. Quantity of import item at Sl. No.3 i.e. Aluminium Ingots may be allowed as 10.63 MT as
4. Quantity of import item at Sl. No.4 i.e. Optical Fibre Core may be allowed as 166.65 Kms(2.66 MT) inclusive of 1 % wastage. 5.

Sl. No.3 i.e. Aluminium Ingots may be allowed as 10.63 MT as
4. Quantity of import item at Sl. No.4 i.e. Optical Fibre Core may be allowed as 166.65 Kms(2.66 MT) inclusive of 1 % wastage. 5.

Case No. 39 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED HQ File Number HQRNORM REVIW00005665AM26 RA File Number 05AX04001397 AM24 Licence No and Date 0511020553/23/08/2023 UDIN00163075AM27

33 comments of consultant (SKB) dated 12.05.2026, as under: SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS 1.03 KG/KG ON THE NET WEIGHT OF LOW ALLOY STEEL PLATE IN THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECN. SA387 GR.22 CL2(0) QTY: 3204.58 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
1 6-E-2041 A FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS LOW ALLOY FINNED U TUBES CONF. TO SPECN. SA213GRTP316L(0) QTY: 6187.50 KGS 1.01 KG/KG ON THE NET WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.58 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
2 6-E-2041 B FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

E EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.58 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
2 6-E-2041 B FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

34 LOW ALLOY FINNED U SA213GRTP316L(0) QTY: 6187.50 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
3 6-E-2041 C FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS LOW ALLOY FINNED U SA213GRTP316L(0) QTY: 6187.50 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U 1.01 KG/KG ON THE NET 4 6-E-2041 D FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

LATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U 1.01 KG/KG ON THE NET 4 6-E-2041 D FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

35 SA213GRTP316L(0) QTY: 6187.50 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
5 6-E-2042 A FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS LOW ALLOY FINNED U SA213GRTP316L(0) QTY: 6187.50 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U WEIGHT OF LOW 6 6-E-2042 B FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

EL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U WEIGHT OF LOW 6 6-E-2042 B FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

36 SA213GRTP316L(0) QTY: 6187.50 KGS THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
7 6-E-2042 C FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS LOW ALLOY FINNED U SA213GRTP316L(0) QTY: 6187.50 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 11079.34 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U SA213GRTP316L(0) WEIGHT OF LOW 8 6-E-2042 D FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

MING CL2(0) QTY: 3204.80 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
LOW ALLOY FINNED U SA213GRTP316L(0) WEIGHT OF LOW 8 6-E-2042 D FEED/PRODUCT CONDENSATE EXCHANGER 1 NOS UDIN00163075AM27

37 QTY: 6187.50 KGS THE EXPORT PRODUCT.
9 7-E-1106 FEED GAS HEATER 1 NOS LOW ALLOY STEEL PLATE CONFORMING TO SPECIFICATION SA387 GR.11 CL2(0) QTY: 12398.10 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
10 6-E-2043A MP CONDENSATE HEATER 1 NOS LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3699.30 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
11 6-E-2043B MP CONDENSATE HEATER 1 NOS LOW ALLOY STEEL PLATE CONFORMING CL2(0) QTY: 3699.30 KGS WEIGHT OF LOW THE EXPORT PRODUCT.
NOTE: THE GRADE OF IMPORTED STEEL AND TUBES SHOULD MATCH THE GRADE OF STEEL AND TUBES GOING IN THE EXPORT PRODUCT.

Case No. 40 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006415AM25 RA File Number 05AX04001467 AM24 Licence No and Date 0511020579/24/08/2023 UDIN00163075AM27

Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006415AM25 RA File Number 05AX04001467 AM24 Licence No and Date 0511020579/24/08/2023 UDIN00163075AM27

38 comments of DPIIT dated 23.03.2026, as under:

Export items description and net fabricated weight of export items at SI.No.1 to 6 may be specified as under: 1.

Sr.No. Description of export item Net Fabricated weight (MT) 1 Pressure Vessel - Ammonia Converter Shell and Baaket (105 -D) incl. Spares & other Accessories 842 2 Secondary Reformer Waste Heat Boiler (101C) 212 3 HP Steam Superheater (102C) 58 4 Ammonia Unitized Chiller (120C) 318.3 5 Bolt Tensioner for 105-D

6 Bolt Tensioner (101 -C , 102-C & 120 -C)

Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export items at SI.No.1 and its quantity may be allowed as 649,289 Kgs as 1.0453 Kgs/Kg content in the export items as claimed by the firm.
Import items at SI.No.2 to 6 may be omitted as not imported by the firm.
Quantity of import item at Sl.No.7 may be allowed as 8 Nos. On net to net basis. However, duty free weight of this item may be allowed as 50,180 Kgs inclusive of 0.12 % wastage as claimed by the firm.
Import item at SI.No.8 may be omitted as not imported by the firm.
Quantity of import item at Sl.No.9 may be allowed as 2 Nos. On net to net basis. However, duty free weight of this item may be allowed as 937 Kgs inclusive of 1.28 % wastage as claimed by the firm.

ity of import item at Sl.No.9 may be allowed as 2 Nos. On net to net basis. However, duty free weight of this item may be allowed as 937 Kgs inclusive of 1.28 % wastage as claimed by the firm. 7. Quantity of import item at Sl.No.10 may be allowed as 1 No. ( 66 Kgs. ) on net to net basis in UDIN00163075AM27

39 the export item at Sl.No. 1. 8. Import items at SI.No.11 to 20 may be omitted as not imported by the firm. 9. Import item at Sl.No.21 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 7,501 Kgs as 1.0449 Kgs/Kg content in the export item 1.
10. Import item at SI.No.22 may be omitted as not imported by the firm. 11. Import item at Sl.No.23 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 7,778 Kgs as 1.02 Kgs/Kg content in the export item as claimed by the firm.
12. Import item at Sl.No.24 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 4,938 Kgs as 1.0314 Kgs/Kg content in the export item as claimed by the firm. 13. Import item at Sl.No.25 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 129,868 Kgs as 1.0335 Kgs/Kg content in the export item as claimed by the firm. 14. Quantity of import item at Sl.No.26 may be allowed as 4 Sets ( 6361 Kgs. ) on net to net basis in the export item at Sl.No. 1. 15.

Kgs/Kg content in the export item as claimed by the firm. 14. Quantity of import item at Sl.No.26 may be allowed as 4 Sets ( 6361 Kgs. ) on net to net basis in the export item at Sl.No. 1. 15. Quantity of import items at Sl.No.27 & 28 may be allowed as 12 Nos. Each on net to net basis with accountability clause. 16. Quantity of import items at Sl.No.29 may be allowed as 6 Sets on net to net basis with accountability clause. 17. Quantity of import items at Sl.No.30 may be allowed as 36 Nos. On net to net basis with accountability clause. 18. Import item at SI.No.31 may be omitted as not imported by the firm. 19. Quantity of import item at Sl.No. 32 may be allowed as 72 Kg.( 1 Nos.) On net to net basis in the export item at SI.No.1. 20. Import items at SI.No.33 & 34 may be omitted as not imported by the firm. 21. Quantity of import items at Sl.No.35 , 37 & 38 ( Welding Consumables) may be allowed as 8000 Kgs., 22000 Kgs & 1870 Kgs respectively. 22. Import items at SI.No.36 , 39 & 40 may be omitted as not imported by the firm. 23. Import item at Sl.No.41 shall be of relevant grade and diameter as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 5 Kgs as 1.01 Kgs/Kg content in the UDIN00163075AM27

t Sl.No.41 shall be of relevant grade and diameter as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 5 Kgs as 1.01 Kgs/Kg content in the UDIN00163075AM27

40 export item at SI.No.1 as claimed by the firm. 24. Import items at SI.No.42 to 53 may be omitted as not imported by the firm. 25. Import item at Sl.No.54 shall be of relevant grade and diameter as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 28,420 Kgs as 1.02 Kgs/Kg content in the export item . 26. Import items at SI.No.55 to 58 may be omitted as not imported by the firm. 27. Import item at Sl.No.59 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 14,856 Kgs as 1.0497 Kgs/Kg content in the export item at SI.No.2. 28. Import items at SI.No. 60 & 61 may be omitted as not imported by the firm. 29. Quantity of import item at Sl.No.62 may be allowed as 43,500 Kgs as 1.0475 Kgs/Kg content in the export item at SI.No.2 as claimed by the firm. 30. Quantity of import items at SI.No. 63 & 64 may be allowed as applied for being 0.33 % of FOB value of exports 31. Quantity of import items at Sl.No.65 to 67 ( Welding Consumables) may be allowed as 3550 Kgs. , 5500 Kgs & 2068 Kgs respectively. 33. Import items at SI.No. 68 & 69 may be omitted as not imported by the firm. 34. Quantity of import item at Sl.No.70 may be allowed as 1 Set ( 7031 Kgs. ) on net to net basis in the export item at Sl.No. 2. 35.Import items at SI.No.

e omitted as not imported by the firm. 34. Quantity of import item at Sl.No.70 may be allowed as 1 Set ( 7031 Kgs. ) on net to net basis in the export item at Sl.No. 2. 35.Import items at SI.No. 71 to 86 may be omitted as not imported by the firm. 36. Quantity of import item at SI.No. 87 may be allowed as applied for . 37. Import items at SI.No.88 may be omitted as not imported by the firm. 38. Quantity of import items at Sl.No.89 to 91 ( Welding Consumables) may be allowed as 2090 Kgs, 5500 Kgs & 1034 Kgs. Respectively.

Import items at SI.No.92 & 93 may be omitted as not imported by the firm.
Quantity of import item at Sl.No.94 may be allowed as 6 Nos. On net to net basis. However, duty free weight of this item may be allowed as 54,105 Kgs inclusive of 1.29 % wastage as claimed by the firm.
Import item at Sl.No.95 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 4,671 Kgs as 1.0412 Kgs/Kg content in the export item as claimed by the firm.
Import item at Sl.No.96 shall be of relevant grade and thickness as contained/utilized in the UDIN00163075AM27

4,671 Kgs as 1.0412 Kgs/Kg content in the export item as claimed by the firm. 42. Import item at Sl.No.96 shall be of relevant grade and thickness as contained/utilized in the UDIN00163075AM27

41 export item at SI.No.4 and its quantity may be allowed as 171,874 Kgs as 1.0486 Kgs/Kg content in the export item as claimed by the firm. 43. Import item at Sl.No.97 shall be of relevant grade and diameter as contained/utilized in the
export item at sl. No. 4 and its quantity may be allowed as 77,867 Kgs as 1.015 Kgs/Kg content in the export item as claimed by the firm. 44. Import items at SI.No. 98 to 104 may be omitted as not imported by the firm. 45. Quantity of import item at SI.No. 105 may be allowed as applied for . 46. Import items at SI.No. 106 to 108 may be omitted as not imported by the firm. 47. Quantity of import item at Sl.No.109 ( Welding Consumables) may be allowed as 2068 Kgs. 48. Import items at SI.No. 110 to 112 may be omitted as not imported by the firm.

Case No. 41 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006200AM25 RA File Number 04AX04000494 AM24 Licence No and Date 0411006009/14/09/2023 comments of DPIIT dated 08.05.2026, as under: Net weight of export item may be specified as 62,553 Kgs. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item. Quantity of the import item may be modified as 4,318 Kgs and may be allowed as 1.05 Kgs/Kg content in the export item . 2.

relevant grade and thickness as contained/utilized in the export item. Quantity of the import item may be modified as 4,318 Kgs and may be allowed as 1.05 Kgs/Kg content in the export item . 2. Import item at Sl.No. 2 shall be of relevant grade and thickness as contained/utilized in the export item. Quantity of the import item may be modified as 1,840 Kgs and may be allowed as 1.05 Kgs/Kg content in the export item . 3. Import item at Sl.No. 3 may be allowed as 1 No.(400 Kgs) on net to net basis. 4. Quantity of import item at SI. No. 4 may be allowed as 600 Nos.(600 Kgs )on net to net 5. Quantity of import item at SI. No. 5 may be allowed as 700 Nos.(700 Kgs.) On net to net 6. UDIN00163075AM27

42 Quantity of import item at SI. No. 6 may be allowed as 500 Nos.(500 Kgs.) On net to net 7. Import item at Sl.No. 7 shall be of relevant grade and size as contained/utilized in the export item. Quantity of the import item may be modified as 48,091 Kgs. And may be allowed as 8. Quantity of import item at SI. No. 8 may be allowed as 12,000 Nos.(3000 Kgs.) On net to net basis with accountability clause. 9. Quantity of import item at SI. No.9 may be allowed as 4 Nos.(215 Kgs.) On net to net basis with accountability clause. 10. Quantity of import item at SI. No.10 may be allowed as 4 Nos.( 500 Kgs.) On net to net 11. Quantity of import item at SI. No.11 may be allowed as per policy for import of spares. 12. Quantity of import item at SI. No.12 may be allowed as 4 Nos.(16 Kgs.) on net to net basis with accountability clause. 13.

tem at SI. No.11 may be allowed as per policy for import of spares. 12. Quantity of import item at SI. No.12 may be allowed as 4 Nos.(16 Kgs.) on net to net basis with accountability clause. 13.

Case No. 42 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name BGR ENERGY SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006201AM25 RA File Number 04AX04000490 AM24 Licence No and Date 0411006023/15/09/2023 comments of DPIIT dated 08.05.2026, as under: Net weight of export item may be specified as 32,233 Kgs. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item. Quantity of the import item may be modified as 6,202 Kgs and may be allowed as 1.05 Kgs/Kg content in the export item . 2. Quantity of import item at SI. No.2 may be allowed as 1,000 Nos.( 500 Kgs.) On net to net 3. Quantity of import item at SI. No.3 may be allowed as 2,000 Nos.(1000 Kgs.) On net to net 4. Quantity of import item at SI. No.4 may be allowed as 4 Nos.( 283 Kgs.) On net to net 5. Quantity of import item at SI. No.5 may be allowed as 4 Nos.(820 Kgs.) On net to net basis with accountability clause. 6. UDIN00163075AM27

may be allowed as 4 Nos.( 283 Kgs.) On net to net 5. Quantity of import item at SI. No.5 may be allowed as 4 Nos.(820 Kgs.) On net to net basis with accountability clause. 6. UDIN00163075AM27

43 Quantity of import item at SI. No.6 may be allowed as 4 Nos.(5 Kgs.) On net to net basis with accountability clause. 7. Quantity of import item at SI. No.7 may be allowed as 10,000 Nos.(4400 Kgs.) On net to net basis with accountability clause. 8. Import item at Sl.No. 8 shall be of relevant grade and size as contained/utilized in the export item. Quantity of the import item may be modified as 9,230 Kgs. And may be allowed as 9.

Case No. 43 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name DELUX BEARINGS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006674AM26 RA File Number 03AX04003741 AM24 Licence No and Date 0311028766/17/11/2023 The Committee considered the case as per agenda and as per comments of DPIIT dated 13.05.2026 decided to reject the present review application noting that as per the norms fixed by the Norms Committee, the weight of components is required to be ascertained at the time of import and decided to maintain the status quo.

Case stands rejected

Case No. 44 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name QNQ DESIGN AND DEVELOPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005292AM25 RA File Number 05AX04002450 AM24 Licence No and Date 0511022712/15/12/2023 comments of Tech-1 dated 08.05.2026, as under:

TE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005292AM25 RA File Number 05AX04002450 AM24 Licence No and Date 0511022712/15/12/2023 comments of Tech-1 dated 08.05.2026, as under: ALL IMPORT ITEMS OF RELEVANT SPECIFICATIONS AND SIZE MAY BE ALLOWED UDIN00163075AM27

44 ON NETT-TO-NETT BASIS WITH ACCOUNTABILITY IN EXPORT

Case No. 45 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name HINDUSTHAN ENGINEERING & INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002470AM26 RA File Number 02AX04000557 AM24 Licence No and Date 0211005634/22/12/2023 Qty. Of steel plates (import items 52 to 54) is 8.22 MT/unit, while it is 4.46 MT (imported), as per Ann. II of letter dt.03.08.25. 1. Wastage claimed in Ann. A to the application is nil, while it is 8.547% as per Ann. II of letter dt.03.08.26. 2. Sl. No. of import items start from 51. 3.

Case No. 46 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name HINDUSTHAN ENGINEERING & INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002469AM26 RA File Number 02AX04000634 AM24 Licence No and Date 0211005857/30/01/2024 Qty. Of steel plates (import items 2 to 7 ) is 10.26 MT/unit, while it is 4.4 MT (imported) for export product 1, as per Ann. VI of letter dt.03.08.25. 1. Qty. Of steel plates (import items 54 to 58 ) is 6.92 MT/unit, while it is 3.7 MT (imported) for export product 2, as per Ann. X of letter dt.03.08.25. 2. UDIN00163075AM27

letter dt.03.08.25. 1. Qty. Of steel plates (import items 54 to 58 ) is 6.92 MT/unit, while it is 3.7 MT (imported) for export product 2, as per Ann. X of letter dt.03.08.25. 2. UDIN00163075AM27

45 Export product 3 has many export items, but there is only 1 item of import no.100. Details of rest of items are not there. 3. Description of export product 4 & item of import for it no. 101 is same 4. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 5. Weight of each Export Product. 6. Weight of each of the imported and indigenous input, export product separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 7. The information at S.Nos.5 to 7 may be furnished export product wise. 8.

Case No. 47 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008544AM24 RA File Number 34AX04001179 AM23 Licence No and Date 3411004599/13/02/2024 comments of DPIIT dated 04.05.2026, as under: Description of the export item may be modified as "Optical Ground Wire (OPGW) 24F ITU G 652B/Aluminium Tube 7.90mm+ Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e.

of the export item may be modified as "Optical Ground Wire (OPGW) 24F ITU G 652B/Aluminium Tube 7.90mm+ Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS). 1. Quantity of import item at Sl. No.1 i.e. Aluminium Ingots may be allowed as 11.08 MT as
2. Quantity of import item at Sl.No.2 (i.e. Aluminium Clad Steel Wire 10/3.40mm (20.3% IACS) may be allowed as 91.14 MT as 1.01 Kgs/Kg content in the export item. 3. Quantity of import item at Sl. No.3 i.e. Aluminium Ingots may be allowed as 10.63 MT as
4. Quantity of import item at Sl. No.4 i.e. Optical Fibre Core may be allowed as 166.65 Kms(2.66 MT) inclusive of 1 % wastage. 5.

Case No. 48 / NC/1/MEET/Apr/202627/1 Case Status Case Approved UDIN00163075AM27

46 Party Name LINDE ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000055AM27 RA File Number 03AX04005556 AM24 Licence No and Date 0311031761/05/03/2024 comments of DPIIT dated 06.05.2026, as under: Net weight of export items at Sl.No. 1 & 2 may be specified as 14906 MT & 3372 MT respectively. 1. Import items at Sl.No.1 to 16, 20, 24 , 26 to 30 , 49 to 61, 76, 101, 102, 135 & 138 to 140 shall be of relevant grade and size as contained/utilized in the export item at Sl.No. 1 and their quantities may be allowed may be allowed inclusive of 1.5 % wastage on net content basis. 2. Quantity of import items at Sl.No.

ize as contained/utilized in the export item at Sl.No. 1 and their quantities may be allowed may be allowed inclusive of 1.5 % wastage on net content basis. 2. Quantity of import items at Sl.No. 17 to 19, 21 to 23, 25 , 31 to 33 , 48, 62 to 75, 77 to 82, 103 to 107, 124 to 129, 134, 136, 137, 141 to 144,162 &163 may be allowed on net to net basis with accountability clause for export item at Sl. No.1. 3. Import items at Sl. No. 34 to 39 , 83 to 89, 91, 108 to 112, 114, 115 & 145 to 150 shall be of relevant grade and size as contained/utilized in the export item at Sl.No. 1 and their quantities may be allowed as 1.02 Kgs/Kg content in the export item at Sl. No. 1. 4. Import items at Sl. No. 40, 90 & 130 to 133 shall be of relevant grade and thickness as contained/utilized in the export item at Sl.No. 1 and its quantity may be allowed as 1.05 Kgs/Kg content in the export item at Sl. No. 1 . 5. Import items at Sl. No. 41 to 46, 92 to 98, 100, 113, 116 to 123, 156 to 161 & 164 shall be of relevant grade and size as contained/utilized in the export item at Sl.No. 2 and their quantities may be allowed as 1.02 Kgs/Kg content in the export item at Sl. No. 2 . 6. Import items at Sl. No. 47, 99 & 151 to 154 shall be of relevant grade and thickness as contained/utilized in the export item at Sl.No. 2 and its quantity may be allowed as 1.05 Kgs/Kg content in the export item at Sl. No. 2. 7. Quantity of import item at Sl.No. 155 may be allowed on net to net basis with accountability clause for export item at Sl. No.2. 8.

lowed as 1.05 Kgs/Kg content in the export item at Sl. No. 2. 7. Quantity of import item at Sl.No. 155 may be allowed on net to net basis with accountability clause for export item at Sl. No.2. 8.

Case No. 49 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004123AM25 RA File Number 34AX04000987 AM24 UDIN00163075AM27

47 Licence No and Date 3411004825/22/04/2024 comments of DPIIT dated 25.05.2026, as under: Description, quantities and net weight of export items at SI.No.1 to 3 may be specified as under: 1.

SI.No. Description of export item at SI.No.1 Sub Category Quantity (In Nos.) Finished Weight(Kgs.)

Turbine components Fastners (ALLOY STEEL ROUND BAR 1 PPS-U624P210L0270 Screw 24 16.32 2 PPS-363B413H15-SF Washer 40 18.08 3 PPS-363B412H15-SF Washer 50 17.6 4 PPS-363B412H15-SF Washer 7 2.45 5 PPS-U615X000P0218 Nut 136 405.28 6 PPS-U615X000P0226-SF Nut 18 647.64 7 PPS-U605P220L2275 Stud 4 64 8 PPS-U605P221L2412 Stud 1 24.32 9 PPS-U605P222L2512 Stud 1 34.26 10 PPS-U607P220L1400 Stud 1 10 11 PPS-U607P221L1525 Stud 1 15.5 UDIN00163075AM27

0226-SF Nut 18 647.64 7 PPS-U605P220L2275 Stud 4 64 8 PPS-U605P221L2412 Stud 1 24.32 9 PPS-U605P222L2512 Stud 1 34.26 10 PPS-U607P220L1400 Stud 1 10 11 PPS-U607P221L1525 Stud 1 15.5 UDIN00163075AM27

48 12 PPS-101A634BC-122 Screw 12 4.2 13 PPS-607P217L1225 Stud 1 4.8 14 PPS-U615X000P0217 Nut 38 85.88 15 PPS-U613X000P0216 Nut 84 89.04 16 PPS-143A1564P0003 Nut 12 23.28 17 PPS-U623P216L0525 Bolt 7 21.14 18 PPS-U606P212L1337 Stud 4 8.704 19 PPS-U615X000P0222-SF Nut 11 119.9 20 PPS-U615X000P0226-SF Nut 1 35.98 21 PPS-U615X000P0218 Nut 8 23.84 22 PPS-264A6889P0002 Nut 1 2.58 23 PPS-RPI134519A-3-SF Spacer 2 1.5 24 B16HTRD6250 Washer 5 9.3 25 PPS-U624P208L0825 Screw 8 5.92 26 PPS-U615X000P0218 Nut 28 82.88 TOTAL 505 1774.394

UDIN00163075AM27

49 Finished Weight SI.No. Description of export item at SI.No.2 Sub Category Quantity (In Nos.) (In Kgs) Turbine Components Valve Parts (Made of Stainless Steel Round Bar) 1 PPS-182A4372P0001 shaft 1 3.36 2 PPS-MSF3-A473A2050 Nut 37 7.252 3 PPS-U624P612L1100 screw 4 9.6 4 PPS-T2-R0069-01-SF Bushing 1 45.4 5 PPS-T2-R0069-01-SF Bushing 1 44.7 6 PPS-627C602052 Nut 4 5.12 7 PPS-MSF3-A414A1600 Nut 102 3.06 8 PPS-MSF3-A414A1600 Nut 10 0.3 9 PPS-6038J55005-SF Disc 3 17.46 10 PPS-TG27K-000062-A-SF Bushing 1 34.28 11 PPS-N26-G10-7371-A-SF Valve 2 62 12 PPS-222A2928P0101-SF Bushing 17 111.18 13 PPS-222A2928P0101-SF Bushing 2 13.08 14 PPS-101B313RA-1-SF Rod 2 12.24 UDIN00163075AM27

K-000062-A-SF Bushing 1 34.28 11 PPS-N26-G10-7371-A-SF Valve 2 62 12 PPS-222A2928P0101-SF Bushing 17 111.18 13 PPS-222A2928P0101-SF Bushing 2 13.08 14 PPS-101B313RA-1-SF Rod 2 12.24 UDIN00163075AM27

50 15 PPS-101C430DYP0001-SF Bushing 4 7.2 16 PPS-MSF3-A473A2050 Nut 107 21.4 17 PPS-MSF3-A473A1645 Nut 8 1.92 18 PPS-627C674021 screw 20 13.4 19 PPS-MSF3-A414A1600 Nut 279 8.37 20 PPS-N25-162-0043-01 Nut 1 1.72 TOTAL 192 423.042

Finished Weight SI.No. Description of export item at SI.No.3 Sub Category Quantity (In Nos.) (In Kgs) TURBINE COMPNENTS VALVE PARTS (MADE OF ALLOY STEEL ROUND BAR ) 1 PPS-650D893007-SF Bushing 1 18.36 2 PPS-199A5930P0101-SF Bushing 2 47.6 3 PPS-622C227101-SF Bushing 1 17.68 4 PPS-622C227101-SF Bushing 1 17.68 5 PPS-196B5206P0001-SF Cap 1 39.62 6 PPS-199A5923P0101-SF Bushing 1 17.1 UDIN00163075AM27

51 7 PPS-182A2966P0001-SF Ring 1 17.28 8 PPS-254A9745P0101-SF Bushing 1 17.68 9 PPS-254A9745P0101-SF Bushing 4 70.72 10 410SSHTRD10000 Bushing 1 5.3 11 PPS-183A5570P0101 Bushing 2 27.468 12 PPS-254A9745P0101-SF Bushing 1 17.68 13 PPS-6038J55005-SF Disc 3 17.46 14 PPS-244A1571P0001 Ring 1 18.4 15 PPS-182A2966P0001-SF Ring 1 7.8 16 PPS-101-1680-SF Bushing 5 42.05 17 PPS-182A2966P0001 Ring 4 68.992 18 PPS-254A9745P0101-SF Bushing 10 177 19 PPS-183A5570P0101 Bushing 1 13.66 20 PPS-134B219FB-1-SF Bushing 2 17.66 TOTAL 323 678

PPS-101-1680-SF Bushing 5 42.05 17 PPS-182A2966P0001 Ring 4 68.992 18 PPS-254A9745P0101-SF Bushing 10 177 19 PPS-183A5570P0101 Bushing 1 13.66 20 PPS-134B219FB-1-SF Bushing 2 17.66 TOTAL 323 678

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No1 and its quantity may be allowed as 3353.44 Kgs as 1.88 Kgs./Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.

UDIN00163075AM27

52 3. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 1212.07 Kgs as 2.86 Kgs./Kg content in the export item at SI.No.2 after taking 20% recovery from the scrap.

Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 1736. 39 Kgs as 2.55 Kgs./Kg content in the export item at SI.No.3 after taking 20% recovery from the scrap.

Case No. 50 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name PARVEEN INDUSTRIES PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000699AM25 RA File Number 03AX04000698 AM25 Licence No and Date 0311033819/14/05/2024 comments of DPIIT dated 04.05.2026, as under: Quantity of export item at Sl.No.1 may be modified as 220 Nos.(21,560 Kgs). 1. Quantity of export item at Sl.No.2 may be modified as 7 Nos.(686 Kgs). 2.

mments of DPIIT dated 04.05.2026, as under: Quantity of export item at Sl.No.1 may be modified as 220 Nos.(21,560 Kgs). 1. Quantity of export item at Sl.No.2 may be modified as 7 Nos.(686 Kgs). 2. Import item at Sl.No.1 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 21991 Kgs. As 1.02 Kgs/Kg content in the export item .. 3. Import item at Sl.No 2 shall be of relevant grade and size as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 699.7 Kgs. As 1.02 Kgs/Kg content in the export item.
4.

Case No. 51 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004748AM26 UDIN00163075AM27

53 RA File Number 05AX04000675 AM25 Licence No and Date 0511026051/12/06/2024 comments of DPIIT dated 06.04.2026, as under: Net weight of export item may be specified as 133.218 MT. 1. Import item at Sl.No.1 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 76986 Kgs. as 1.015 Kgs/Kg content in the export item as claimed by the firm. 2.

shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 76986 Kgs. as 1.015 Kgs/Kg content in the export item as claimed by the firm. 2.

Case No. 52 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006420AM25 RA File Number 05AX04000380 AM25 Licence No and Date 0511026299/25/06/2024 comments of DPIIT dated 23.03.2026, as under: Net fabricated weight of export items at SI.No. 1 to 6 may be specified as 590 MT each . 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 2. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 83,197 Kgs. As 1.05 Kgs/Kg content in the export item as claimed by the firm. 3. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 80,009 Kgs. As 1.05 Kgs/Kg 4. Import item at Sl.No.4 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as applied for i.e. 24,167 Kgs. Being less than the net content in the export item. 5. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.

ed for i.e. 24,167 Kgs. Being less than the net content in the export item. 5. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 43,687 Kgs. As 1.047 Kgs/Kg 6. UDIN00163075AM27

54 Import item at Sl.No.6 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 1 and its quantity may be allowed as 5272 Kgs. As 1.0475 Kgs/Kg 7. Quantity of import item at Sl.No. 7 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.1 8. Import items at SI.No. 8 to 12 may be omitted. 9. Quantity of import items at Sl.No.13 to 16 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 10. Import item at SI.No. 17 may be omitted . 11. Import item at Sl.No.18 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 12. Quantity of import items at Sl.No.19 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. . 13. Import item at SI.No. 20 may be omitted . 14. Import item at Sl.No.21 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 15. Import item at Sl.No.22 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.

No. 2 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 15. Import item at Sl.No.22 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 83,197 Kgs. As 1.05 Kgs/Kg 16. Import item at Sl.No.23 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 80,009 Kgs. As 1.05 Kgs/Kg 17. Import item at Sl.No.24 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as applied for i.e. 24,167 Kgs. Being less than the net content in the export item. 18. Import item at Sl.No.25 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 43,687 Kgs. As 1.047 Kgs/Kg content in the export item at SI.No.1 as claimed by the firm. 19. Import item at Sl.No.26 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 2 and its quantity may be allowed as 5272 Kgs. As 1.0475 Kgs/Kg 20. Quantity of import item at Sl.No. 27 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.2 21. Import items at SI.No. 28 to 32 may be omitted. 22. Quantity of import items at Sl.No.33 to 36 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 23. Import item at SI.No. 37 may be omitted . 24.

. Quantity of import items at Sl.No.33 to 36 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 23. Import item at SI.No. 37 may be omitted . 24. Import item at Sl.No.38 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 25. UDIN00163075AM27

55 Quantity of import items at Sl.No..39 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. . 26. Import item at SI.No. 40 may be omitted . 27. Import item at Sl.No.41 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 28. Import item at Sl.No. 42 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as 83,197 Kgs. As 1.05 Kgs/Kg 29. Import item at Sl.No. 43 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as 80,009 Kgs. As 1.05 Kgs/Kg 30. Import item at Sl.No.44 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as applied for i.e. 24,167 Kgs. Being less than the net content in the export item. 31. Import item at Sl.No. 45 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.

for i.e. 24,167 Kgs. Being less than the net content in the export item. 31. Import item at Sl.No. 45 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as 43,687 Kgs. As 1.047 Kgs/Kg 32. Import item at Sl.No.46 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 3 and its quantity may be allowed as 5272 Kgs. As 1.0475 Kgs/Kg 33. Quantity of import item at Sl.No. 47 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.3 34. Import items at SI.No. 48 to 52 may be omitted. 35. Quantity of import items at Sl.No.53 to 56 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 36. Import item at SI.No. 57 may be omitted . 37. Import item at Sl.No.58 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 38. Quantity of import items at Sl.No.59 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. . 39. Import item at SI.No. 60 may be omitted . 40. Import item at Sl.No.61 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 41. Import item at Sl.No. 62 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.

No. 4 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 41. Import item at Sl.No. 62 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as 83,197 Kgs. As 1.05 Kgs/Kg 42. Import item at Sl.No. 63 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as 80,009 Kgs. As 1.05 Kgs/Kg 43. UDIN00163075AM27

56 Import item at Sl.No. 64 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as applied for i.e. 24,167 Kgs. Being less than the net content in the export item. 44. Import item at Sl.No. 65 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as 43,687 Kgs. As 1.047 Kgs/Kg 45. Import item at Sl.No.66 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 4 and its quantity may be allowed as 5272 Kgs. As 1.0475 Kgs/Kg 46. Quantity of import item at Sl.No. 67 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.3 47. Import items at SI.No. 68 to 72 may be omitted. 48. Quantity of import items at Sl.No.73 to 76 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 49. Import item at SI.No. 77 may be omitted . 50.

. Quantity of import items at Sl.No.73 to 76 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 49. Import item at SI.No. 77 may be omitted . 50. Import item at Sl.No.78 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 51. Quantity of import items at Sl.No.79 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. . 52. Import item at SI.No. 80 may be omitted . 53. Import item at Sl.No.81 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as 349,516 Kgs. As 1.041 Kgs/Kg 54. Import item at Sl.No. 82 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as 83,197 Kgs. As 1.05 Kgs/Kg 55. Import item at Sl.No. 83 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as 80,009 Kgs. As 1.05 Kgs/Kg 56. Import item at Sl.No. 84 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as applied for i.e. 24,166 Kgs. Being less than the net content in the export item. 57. Import item at Sl.No. 85 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No.

for i.e. 24,166 Kgs. Being less than the net content in the export item. 57. Import item at Sl.No. 85 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as 43,687 Kgs. As 1.047 Kgs/Kg 58. Import item at Sl.No. 86 shall be of relevant grade and thickness as contained/utilized in the
export item at Sl. No. 5 and its quantity may be allowed as 5272 Kgs. As 1.0475 Kgs/Kg 59. Quantity of import item at Sl.No. 87 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.5 60. Import items at SI.No. 88 to 92 may be omitted. 61. UDIN00163075AM27

57 Quantity of import items at Sl.No.93 to 96 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 62. Import item at SI.No. 97 may be omitted . 63. Import item at Sl.No.98 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.5 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 64. Quantity of import items at Sl.No.99 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. 65. Import item at SI.No. 100 may be omitted . 66. Import item at Sl.No. 101 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 349,516 Kgs. As 1.041
Kgs/Kg content in the export item as claimed by the firm. 67. Import item at Sl.No.

contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 349,516 Kgs. As 1.041
Kgs/Kg content in the export item as claimed by the firm. 67. Import item at Sl.No. 102 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 83,197 Kgs. As 1.05
Kgs/Kg content in the export item as claimed by the firm. 68. Import item at Sl.No. 103 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 80,009 Kgs. As 1.05
Kgs/Kg content in the export item as claimed by the firm. 69. Import item at Sl.No.104 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as applied for i.e. 24,167 Kgs. Being less than the net content in the export item. 70. Import item at Sl.No. 105 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 43,687 Kgs. As 1.047
Kgs/Kg content in the export item as claimed by the firm. 71. Import item at Sl.No. 106 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 6 and its quantity may be allowed as 5272 Kgs. As 1.0475
Kgs/Kg content in the export item as claimed by the firm. 72. Quantity of import item at Sl.No. 107 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.6 73. Import items at SI.No.

export item as claimed by the firm. 72. Quantity of import item at Sl.No. 107 may be allowed as 12082 Kgs. ( 5 Nos.) On net to net basis in the export item at SI.No.6 73. Import items at SI.No. 108 to 112 may be omitted. 74. Quantity of import items at Sl.No.113 to 116 ( Welding Consumables) may be allowed as 2000 Kgs, 2049 Kgs , 14433 Kgs & 2950 Kgs. Respectively. 75. Import item at SI.No. 117 may be omitted . 76. Import item at Sl.No.118 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.6 and its quantity may be allowed as applied for i.e. 943 Kgs being less than the net content in the export item. 77. Quantity of import items at Sl.No.119 ( Welding Consumables) may be allowed as applied for i.e 537 Kgs. . 78. Import item at SI.No. 120 may be omitted. 79.

UDIN00163075AM27

58 Case No. 53 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and Date 2411003661/01/07/2024 comments of DPIIT dated 06.05.2026, as under: Net weight of export item at SI.No.1 may be specified as "455 MT containing 149 MT of Alloy Steel Wire Rods Size 14 MM (import item No.1) ". 1. Net weight of export item at SI.No.2 may be specified as "42.11 MT containing 14.3 MT of Alloy Steel Wire Rods Size 20 MM (import item No. 2)". 2. Net weight of export item at SI.No.3 may be specified as "70 MT containing 23.4 MT of Alloy Steel Wire Rods Size 23 MM (import item No.3)". 3.

y Steel Wire Rods Size 20 MM (import item No. 2)". 2. Net weight of export item at SI.No.3 may be specified as "70 MT containing 23.4 MT of Alloy Steel Wire Rods Size 23 MM (import item No.3)". 3. Import item at Sl.No.1 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e 149 MT on net to net basis . 4. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 14.3 MT on net to net basis . 5. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e 23.4 MT on net to net basis . 6.

Case No. 54 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002136AM26 RA File Number 05AX04001471 AM25 Licence No and Date 0511027174/14/08/2024 UDIN00163075AM27

ty Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002136AM26 RA File Number 05AX04001471 AM25 Licence No and Date 0511027174/14/08/2024 UDIN00163075AM27

59 AS PER LETTER DATED 15.07.2025 EXPORT IS ONLY COBALT METAL & ash; 22.78 MT IMPORT IS OXO METTALIC COMPOUND & ash; 271 MT (CONTAING COBALT 10.44 %) (NET COBALT CONTENT- 28.79 MT AS SUCH COBALT METAL LOSS IS 5.51 MT WHICH AMOUNT FOR 24 % METAL LOSS KINDLY EXPLAIN THIS METAL LOSS

Case No. 55 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001675AM26 RA File Number 09AX04000278 AM25 Licence No and Date 0911007773/21/08/2024 comments of consultant (SKB) dated 19.04.2026, as under: SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED 1 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507, CT INNER CASING, C1/MW33012) (NET CONTENT OF IMPORT ITEM SHALL BE 2862.00 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 54 NOS STEEL CASTING, GRADE: FV507,) CT INNER CASING (C1/MW33012)

QTY: 5292.00 KGS 4928.36 KGS INCLUSIVE OF 72.20% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT 2 TURBINE PARTS (STEEL CASTING, GRADE: FV507), CT CASING CARRIER (C1/MW33021), (NET CONTENT 503.10 KG, WHICH SHOULD BE BILLS AND INVOICE) 26 NOS STEEL CASTING, GRADE: FV507,) CT CASING CARRIER (C1/MW33021)

QTY: 933.40 KGS 873.38 KGS INCLUSIVE OF 73.60% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE

LS AND INVOICE) 26 NOS STEEL CASTING, GRADE: FV507,) CT CASING CARRIER (C1/MW33021)

QTY: 933.40 KGS 873.38 KGS INCLUSIVE OF 73.60% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT TURBINE PARTS (STEEL (STEEL CASTING, GRADE: 681.03 KGS INCLUSIVE 3 53 NOS UDIN00163075AM27

60 CASTING, GRADE: FV507), RETAINING RING CT1 SHROUD (C1/MW33044), (NET CONTENT 275.60 KG, WHICH SHOULD BE BILLS AND INVOICE) FV507,) RETAINING RING CT1 SHROUD (C1/MW33044)

QTY: 752.60 KGS OF 147.11% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT 4 TURBINE PARTS (STEEL CASTING, GRADE: FV507), RETAINING RING CT2 SHROUD (C1/MW33344), (NET CONTENT 595.00 KG, WHICH SHOULD BE BILLS AND INVOICE) 35 NOS (STEEL CASTING, GRADE: FV507,) RETAINING RING CT2 SHROUD (C1/MW33344)

QTY: 1270.50 KGS 1169.17 KGS INCLUSIVE OF 96.50% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT 5 TURBINE PARTS (STEEL CASTING, GRADE: FV507) PT2 CARRIER RING (C1/MW33611), (NET CONTENT OF IMPORT ITEM SHALL BE 3201.20 KG, WHICH SHOULD BE BILLS AND INVOICE) 40 NOS (STEEL CASTING, GRADE: FV507,) PT2 CARRIER RING (C1/MW33611)

QTY: 4724.00 KGS 4495.44 KGS INCLUSIVE OF 40.43% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT 6 TURBINE PARTS (STEEL CASTING, GRADE: FV507) STATOR LOCATION RING (C1/MW33614A), (NET CONTENT 1385.60 KG, WHICH SHOULD BE BILLS AND INVOICE) 16 NOS (STEEL CASTING, GRADE: FV507,) STATOR LOCATION RING (C1/MW33614A)

QTY: 2960.00 KGS

STATOR LOCATION RING (C1/MW33614A), (NET CONTENT 1385.60 KG, WHICH SHOULD BE BILLS AND INVOICE) 16 NOS (STEEL CASTING, GRADE: FV507,) STATOR LOCATION RING (C1/MW33614A)

QTY: 2960.00 KGS 2723.81 KGS INCLUSIVE OF 96.58% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT 7 TURBINE PARTS (STEEL CASTING, GRADE: FV507) HO NOZZLE SPACER RING (C1/RU33021), (NET CONTENT 144.00 KG, WHICH SHOULD BE BILLS AND INVOICE) 16 NOS (STEEL CASTING, GRADE: FV507,) HO NOZZLE SPACER RING (C1/RU33021)

QTY: 272.00 KGS 252.80 KGS INCLUSIVE OF 75.55% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT TURBINE PARTS (STEEL CASTING, GRADE: FV507) STATOR SEAL RING STAGE 1 (C1/RU33621), (NET CONTENT 62.50 KG, WHICH SHOULD BE 8 25 NOS (STEEL CASTING, GRADE: FV507,) STATOR SEAL RING STAGE 1 (C1/RU33621)

QTY: 250.00 KGS 221.90 KGS INCLUSIVE OF 255.00% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT UDIN00163075AM27

507,) STATOR SEAL RING STAGE 1 (C1/RU33621)

QTY: 250.00 KGS 221.90 KGS INCLUSIVE OF 255.00% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT UDIN00163075AM27

61 BILLS AND INVOICE) 9 TURBINE PARTS (STEEL CASTING, GRADE: FV507) STATOR SEAL RING STAGE 2 (C1/RU33622), (NET CONTENT 78.40 KG, WHICH SHOULD BE BILLS AND INVOICE) 28 NOS (STEEL CASTING, GRADE: FV507,) STATOR SEAL RING STAGE 2 (C1/RU33622)

QTY: 266.00 KGS 237.90 KGS INCLUSIVE OF 203.40% ON THE NET WEIGHT OF THE IMPORTED STEEL CASTING IN THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED STEEL CASTINGS SHOULD BE MATCHED WITH THE GRADE OF FINISHED STEEL CASTINGS OF THE EXPORT PRODUCT.

Case No. 56 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name LARSEN AND TOUBRO LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005553AM26 RA File Number 03AX04002526 AM25 Licence No and Date 0311036626/26/08/2024 Model number, technical specification and specific quantity-both in terms of number (if any) and/or weight, of each export product (Appendix-33 of current HBP refers). 1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 2.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 2. Sheet layout diagram of the material indicating the wastage during blanking. 3. Qty. Of components may be given in numbers also. 4. It is requested to submit point wise reply separately for each export product. 5.

UDIN00163075AM27

62 Case No. 57 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002833AM25 RA File Number 03AX04002559 AM25 Licence No and Date 0311036863/03/09/2024 comments of DPIIT dated 08.05.2026, as under: Quantity of export item at SI.No.1 may also be specified as 8,79,212 Nos.in addition to its weight. 1. Quantity of export item at SI.No.2 may also be specified as 2,01,900 Nos.in addition to its weight. 2. Quantity of export item at SI.No.3 may also be specified as 2,33,171 Nos.in addition to its weight. 3. Quantity of export item at SI.No.4 may also be specified as 36,811 Nos.in addition to its weight. 4. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 4536 MT as 1.78 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 5. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e.

recovery from the scrap. 5. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e. 1372 MT as 1.114
Kgs/Kg content in the export item . 6. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e 247 MT as 1.49
Kgs/Kg content in the export item . 7. Quantity of import item at Sl. No.4 may be allowed as 4% of weight of Steel to be galvanized in export item No. 1 . 8. Import item at Sl.No.5 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 2043 MT as 1.478 Kgs/Kg content in the export item at after taking 20% recovery from the scrap. 9. Import item at Sl.No.6 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 503.6 MT as 1.30 Kgs/Kg content in the export item at after taking 20% recovery from the scrap. 10. Import item at Sl.No.7 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed applied for i.e. 1232.29 MT as 2.21
Kgs/Kg content in the export item . 11. Import item at Sl.No.8 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 623.4 MT as 1.286 Kgs/Kg 12. UDIN00163075AM27

rt item at Sl.No.8 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 623.4 MT as 1.286 Kgs/Kg 12. UDIN00163075AM27

63 content in the export item at after taking 20% recovery from the scrap. Quantity of import item at Sl. No.9 may be allowed as 4% of weight of Steel to be galvanized in export item No. 2. 13. Import item at Sl.No.10 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as 469.2 MT as 1.478 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 14. Import item at Sl.No.11 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 115 MT as 1.294 Kgs/Kg content in the export item . 15. Import item at Sl.No.12 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e. 1200.15 MT as 1.66 Kgs/Kg content in the export item . 16. Import item at Sl.No.13 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e 717.16 MT as 1.28 Kgs/Kg content in the export item . 17. Import item at Sl.No.14 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e. 97.19 MT as 1.486 Kgs/Kg content in the export item . 18.

be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e. 97.19 MT as 1.486 Kgs/Kg content in the export item . 18. Import item at Sl.No.15 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e. 586.02 MT as 1.87 Kgs/Kg content in the export item . 19. Quantity of import item at Sl. No.16 may be allowed as 4% of weight of Steel to be galvanized in export item No. 3. 20. Import item at Sl.No.17 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 541.9 MT as 1.478 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 21. Import item at Sl.No.18 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 98.85 MT as 1.54 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 22.

Case No. 58 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000072AM27 RA File Number 24AX04000233 AM25 Licence No and Date 2411003834/06/09/2024 UDIN00163075AM27

Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000072AM27 RA File Number 24AX04000233 AM25 Licence No and Date 2411003834/06/09/2024 UDIN00163075AM27

64 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of DPIIT dated 09.04.2026, as under: Quantities and net weight of export items at SI .No.1 to 9 may be specified as under: 1. Sr No. Quantity (In Nos.) Export Product Weight (Kgs) 1 123 7595.25 Kgs. 2 100 5365.9 Kgs. 3 270 3688.2 Kgs. 4 625 3515 Kgs. 5 200 807.6 Kgs. 6 171 14577.75 Kgs. 7 240 4869.6 Kgs. 8 150 9163.5 Kgs. 9 301 22295.07 Kgs.

2 Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 9938.09 Kgs. As 1.30 Kgs./Kg content in the export item at SI.No.1 after taking 5%

Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 11294.94 Kgs. As 2.10 Kgs./Kg content in the export item at SI.No.2 after taking 5%
Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 8964.40 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.3 after taking 5%

vant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 8964.40 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.3 after taking 5%

Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 10233.87 Kgs as 2.91 Kgs./Kg content in the export item at SI.No.4 after taking 5% UDIN00163075AM27

Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 3258.98 Kgs as 4.03 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.
Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 17834.87 Kgs. As 1.22 Kgs./Kg content in the export item at SI.No.6 after taking 5%
Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 15321.12 Kgs as 3.13 Kgs./Kg content in the export item at SI.No.7 after taking 5%
Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 19158.45 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.8 after taking 5%

nt grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 19158.45 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.8 after taking 5%

Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 30716.29 Kgs as 1.37 Kgs./Kg content in the export item at SI.No.9 after taking 5%

Case No. 59 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name INDUSTRIAL JEWELS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003607AM26 RA File Number 03AX04002730 AM25 Licence No and Date 0311037071/11/09/2024 The Committee considered the case as per agenda and as per comments of Tech-3 dated 21.04.2026 decided to reject the present review application noting that the earlier proposal was approved on the basis of details provided by the firm in their application and there is no justification for revision of the same. UDIN00163075AM27

application noting that the earlier proposal was approved on the basis of details provided by the firm in their application and there is no justification for revision of the same. UDIN00163075AM27

66 Case stands rejected

Case No. 60 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003203AM25 RA File Number 03AX04003000 AM25 Licence No and Date 0311037300/20/09/2024 comments of DPIIT dated 06.05.2026, as under: Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at Sl. No. 1 and its quantity may be allowed as as 1.02 Kgs./Kg content in the export item . 1. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at Sl.No. 2 and its quantity may be allowed as as 1.02 Kgs./Kg content in the export item . 2.

Case No. 61 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name RIBO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000176AM26 RA File Number 04AX04000560 AM25 Licence No and Date 0411008277/24/09/2024 THE MATERIAL BALANCE OF IMPORT AND EXPORT QUANTITY IS NOT MATCHING WITH 2% WASTAGE AS GIVEN IN APPENDIX 4E. 1. SUBMIT THE EXCEL SHEET, WHICH COULD INDICATE DESCRIPTION OF THE EXPORT PRODUCT, EXPORT WEIGHT, QUANTITY IN MTS AND ALSO IN NUMBERS, DESCRIPTION OF THE IMPORT ITEMS, SIZE OF THE PIPES, AND 2. UDIN00163075AM27

CEL SHEET, WHICH COULD INDICATE DESCRIPTION OF THE EXPORT PRODUCT, EXPORT WEIGHT, QUANTITY IN MTS AND ALSO IN NUMBERS, DESCRIPTION OF THE IMPORT ITEMS, SIZE OF THE PIPES, AND 2. UDIN00163075AM27

67 WHETHER THE PIPE IS SEAMLESS OR ERW, QUANTITY OF IMPORT ITEMS INCLUDING WASTAGE CLAIMED ON NET WEIGHT OF THE QUANTITY GOING IN THE EXPORT PRODUCT. THE EXPANDED FORM OF ABBREVIATION USED IN THE EXPORT PRODUCT. 3. USE OF THE EXPORT PRODUCT. 4.

Case No. 62 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED HQ File Number HQRNORM REVIW00001704AM26 RA File Number 09AX04000557 AM25 Licence No and Date 0911008066/30/09/2024 comments of consultant (SKB) dated 19.04.2026, as under: SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 TURBINE BLADE, (NET CONTENT OF IMPORT ITEM SHALL BE 28,907.00 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICES

6850 NOS STAINLESS STEEL ROUND BARS, GRADE: 6s4s3+(B50A36sB I) SIZE DIA 90. MM

QTY: 47950.00 KGS 44140.99 KGS INCLUSIVE OF 52.70% ON THE NET WEIGHT OF THE IMPORTED STAINLESS STEEL OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

UDIN00163075AM27

THE IMPORTED STAINLESS STEEL OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STAINLESS STEEL OF THE EXPORT PRODUCT.

UDIN00163075AM27

Case No. 63 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Apr/ 202627/ 1 and 23/04/2026 HQ File Number HQRNORM REVIW00001707AM26 RA File Number 09AX04000554 AM25 Licence No and Date 0911008067/30/09/2024 comments of consultant (SKB) dated 19.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM ALUMINIUM BAR GRADE: 2014-T6/T651) NET CONTENT OF IMPORT ITEM SHALL BE 30.00 KGS, WHICH 1 SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 1000 NOS ALUMINIUM BAR, GRADE: 2014- T6/T651

QTY: 130.00 KGS 115.00 KGS INCLUSIVE OF 283.33% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT 2 PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM ALUMINIUM BAR GRADE: 2024-T4). NET CONTENT OF IMPORT ITEM SHALL BE 965.40 KGS, WHICH SHOULD BE 2 REFLECT IN THE SHIPPING BILLS AND INVOICE. 643600 NOS ALUMINIUM BAR, GRADE: 2024-T4

QTY: 2574.40 KGS 2332.70 KGS INCLUSIVE OF 141.63% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT UDIN00163075AM27

PING BILLS AND INVOICE. 643600 NOS ALUMINIUM BAR, GRADE: 2024-T4

QTY: 2574.40 KGS 2332.70 KGS INCLUSIVE OF 141.63% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT UDIN00163075AM27

69 3 PRECISION COMPONENTS FOR AIRCRAFT (ALUMINIUM BAR GRADE: 2024- T6/T851, ) NET CONTENT OF IMPORT ITEM SHALL BE 3,656.09 KGS, WHICH SHOULD BE REFLECT IN THE SHIPPING BILLS AND INVOICE) 71688 NOS ALUMINIUM BAR, GRADE: 2024- T6/T851

QTY: 7168.80 KGS 6642.02 KGS INCLUSIVE OF 81.67% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT 4 PRECISION COMPONENTS FOR AIRCRAFT ( MADE FROM ALUMINIUM BAR GRADE: 6061/T651), NET CONTENT OF IMPORT ITEM SHALL BE 976.55 KGS, WHICH SHOULD 4 BE REFLECT IN THE SHIPPING BILLS AND INVOICE) 97655 NOS ALUMINIUM BAR, GRADE: 6061/T651

QTY: 9765.50 KGS 8447.16 KGS INCLUSIVE OF 765% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT 5 PRECISION COMPONENTS FOR AIRCRAFT ( ALUMINIUM BAR GRADE: 7075-T73,) NET CONTENT OF IMPORT ITEM SHALL BE 2,003.25 KGS, WHICH SHOULD BE REFLECT 5 IN THE SHIPPING BILLS AND INVOICE) 125203 NOS ALUMINIUM BAR, GRADE: 7075-T73

QTY: 5008.12 KGS 4557.39 KGS INCLUSIVE OF 127.50% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT PRECISION COMPONENTS FOR AIRCRAFT (ALUMINIUM PLATE GRADE: 6061/T651) NET CONTENT OF IMPORT ITEM SHALL 87.01 KGS INCLUSIVE OF 1218.33% WASTAGE ON THE NET WEIGHT OF THE 6 44 NOS ALUMINIUM PLATE, GRADE: 6061/T651

QTY: 101.20 KGS UDIN00163075AM27

1/T651) NET CONTENT OF IMPORT ITEM SHALL 87.01 KGS INCLUSIVE OF 1218.33% WASTAGE ON THE NET WEIGHT OF THE 6 44 NOS ALUMINIUM PLATE, GRADE: 6061/T651

QTY: 101.20 KGS UDIN00163075AM27

70 BE 6.60 KGS, WHICH SHOULD BE REFLECT IN 6 THE SHIPPING BILLS AND INVOICE) EXPORT PRODUCT 7 PRECISION COMPONENTS FOR AIRCRAFT (ALUMINIUM PLATE GRADE: 2219/T851,) NET CONTENT OF IMPORT ITEM SHALL BE 436.48 KGS, WHICH SHOULD BE REFLECT 7 IN THE SHIPPING BILLS AND INVOICE) 496 NOS ALUMINIUM PLATE, GRADE: 2219/T851

QTY: 2008.80 KGS 1772,94 KGS INCLUSIVE OF 306.19% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT

NOTE: THE GRADE OF IMPORTED ALUMINIUM ALLOY BARS & PLATES SHOULD MATCH THE GRADE OF ALUMINIUM ALLOY OF THE EXPORT PRODUCT.

Case No. 64 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name OMNITECH ENGINEERING LIMITED HQ File Number HQRNORM REVIW00002753AM26 RA File Number 24AX04000273 AM25 Licence No and Date 2411003922/08/10/2024 comments of DPIIT dated 20.04.2026, as under: Quantities and net weight of export items at SI .No.1 to 35 may be specified as under: 1.

Quantity Weight Sr Quantity Weight Sr Quantity Weight Sr Quantity Weight Sr No. UDIN00163075AM27

uantities and net weight of export items at SI .No.1 to 35 may be specified as under: 1.

Quantity Weight Sr Quantity Weight Sr Quantity Weight Sr Quantity Weight Sr No. UDIN00163075AM27

71 (Nos.) (Kg) No. (Nos.) (Kg) No. (Nos.) (Kg) No. (Nos.) (Kg) 1 72 3863.45 11 354 5908.26 21 35 1393.7 31 140 2464 2 195 3917.55 12 602 9607.92 22 24 306.48 32 110 3502.4 3 45 1003.5 13 85 2062.1 23 32 937.6 33 106 8380.36 4 140 11207 14 250 766.25 24 140 4653.6 34 20 1601 5 20 876.6 15 195 1033.5 25 125 2737.5 35 10 467 6 295 23322.7 16 96 881.28 26 110 7404.1 7 120 5259.6 17 270 2057.4 27 50 2344.5 8 55 4739.9 18 24 220.32 28 50 4262.5 9 75 2292.75 19 94 3786.23 29 36 2223.72 10 325 9581 20 60 2802 30 195 3971.37

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 8132.36 Kgs. As 2.10 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.
Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 9256.45 Kgs. As 2.36 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.
Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 1845.67 Kgs as 1.83 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

UDIN00163075AM27

ized in the export item at SI.No.3 and its quantity may be allowed as 1845.67 Kgs as 1.83 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

UDIN00163075AM27

72 4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 20389.32 Kgs as 1.81 Kgs./Kg content in the export item at SI.No.4 after taking 5% recovery from the scrap.

Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 1796.58 Kgs as 2.04 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.
Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 46760.007 Kgs. As 2.004 Kgs./Kg content in the export item at SI.No.6 after taking 5% recovery from the scrap.
Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 10779.48 Kgs as 2.04 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.
Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 9774.18 Kgs as 2.06 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

tained / utilized in the export item at SI.No.8 and its quantity may be allowed as 9774.18 Kgs as 2.06 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 5243.21 Kgs as 2.28 Kgs./Kg content in the export item at SI.No.9 after taking 5% recovery from the scrap.
Import item at SI No10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 19312. 8 Kgs as 2.01 Kgs./Kg content in the export item at SI.No.10 after taking 5% recovery from the scrap.
Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 13797.85 Kgs as 2.33 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

UDIN00163075AM27

in the export item at SI.No.11 and its quantity may be allowed as 13797.85 Kgs as 2.33 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

UDIN00163075AM27

73 12. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 19547.54 Kgs as 2.03 Kgs./Kg content in the export item at SI.No.12 after taking 5% recovery from the scrap.

13.Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 5172.26 Kgs as 2.50 Kgs./Kg content in the export item at SI.No.13 after taking 5% recovery from the scrap.

14.Import item at SI No.14 shall be of relevant grade and size as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 5782.01 Kgs as 7.54 Kgs./Kg content in the export item at SI.No.14 after taking 5% recovery from the scrap.

Import item at SI No.15 shall be of relevant grade and size as contained / utilized in the export item at SI.No. 15 and its quantity may be allowed as 5144.01 Kgs as 4.97 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.
Import item at SI No.16 shall be of relevant grade and size as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 4044.27 Kgs as 4.58 Kgs./Kg content in the export item at SI.No.16 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.16 and its quantity may be allowed as 4044.27 Kgs as 4.58 Kgs./Kg content in the export item at SI.No.16 after taking 5% recovery from the scrap.

Import item at SI No.17 shall be of relevant grade and size as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 5314.18 Kgs as 2.58 Kgs./Kg content in the export item at SI.No.17 after taking 5% recovery from the scrap.
Import item at SI No.18shall be of relevant grade and size as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 987.99 Kgs as 4.48 Kgs./Kg content in the export item at SI.No.18 after taking 5% recovery from the scrap.
Import item at SI No.19 shall be of relevant grade and size as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 7108.27 Kgs as 1.87 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap.

UDIN00163075AM27

d in the export item at SI.No.19 and its quantity may be allowed as 7108.27 Kgs as 1.87 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap.

UDIN00163075AM27

74 20. Import item at SI No.20 shall be of relevant grade and size as contained / utilized in the export item at SI.No.20 and its quantity may be allowed as 8201.04 Kgs as 2.92 Kgs./Kg content in the export item at SI.No.20 after taking 5% recovery from the scrap.

Import item at SI No.21 shall be of relevant grade and size as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 4029.09 Kgs as 2.89 Kgs./Kg content in the export item at SI.No.21 after taking 5% recovery from the scrap.
Import item at SI No. 22 shall be of relevant grade and size as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 921.39 Kgs as 3.006 Kgs./Kg content in the export item at SI.No.22 after taking 5% recovery from the scrap.
Import item at SI No.23 shall be of relevant grade and size as contained / utilized in the export item at SI.No.23 and its quantity may be allowed as 1800.96 Kgs as 1.92 Kgs./Kg content in the export item at SI.No.23 after taking 5% recovery from the scrap.
Import item at SI No.24 shall be of relevant grade and size as contained / utilized in the export item at SI.No.24 and its quantity may be allowed as 15627.43 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.24 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.24 and its quantity may be allowed as 15627.43 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.24 after taking 5% recovery from the scrap.

Import item at SI No.25 shall be of relevant grade and size as contained / utilized in the export item at SI.No.25 and its quantity may be allowed as 7249.52 Kgs as 2.64 Kgs./Kg content in the export item at SI.No.25 after taking 5% recovery from the scrap.
Import item at SI No.26 shall be of relevant grade and size as contained / utilized in the export item at SI.No.26 and its quantity may be allowed as 15692.62 Kgs as 2.11 Kgs./Kg content in the export item at SI.No.26 after taking 5% recovery from the scrap.
Import item at SI No.27 shall be of relevant grade and size as contained / utilized in the export item at SI.No.27 and its quantity may be allowed as 7309. 2 Kgs as 3.11 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

UDIN00163075AM27

in the export item at SI.No.27 and its quantity may be allowed as 7309. 2 Kgs as 3.11 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

UDIN00163075AM27

75 28. Import item at SI No.28 shall be of relevant grade and size as contained / utilized in the export item at SI.No.28 and its quantity may be allowed as 5214.87 Kgs as 1.22 Kgs./Kg content in the export item at SI.No.28 after taking 5% recovery from the scrap.

Import item at SI No.29 shall be of relevant grade and size as contained / utilized in the export item at SI.No.29 and its quantity may be allowed as 5087.62 Kgs as 2.28 Kgs./Kg content in the export item at SI.No.29 after taking 5% recovery from the scrap.
Import item at SI No.30 shall be of relevant grade and size as contained / utilized in the export item at SI.No.30 and its quantity may be allowed as 9259.14 Kgs as 2.33 Kgs./Kg content in the export item at SI.No.30 after taking 5% recovery from the scrap.

31.Import item at SI No.31 shall be of relevant grade and size as contained / utilized in the export item at SI.No.31 and its quantity may be allowed as 5934.63 Kgs as 2.40 Kgs./Kg content in the export item at SI.No.31 after taking 5% recovery from the scrap.

Import item at SI No.32 shall be of relevant grade and size as contained / utilized in the export item at SI.No.32 and its quantity may be allowed as 10384.77 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.32 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.32 and its quantity may be allowed as 10384.77 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.32 after taking 5% recovery from the scrap.

Import item at SI No.33 shall be of relevant grade and size as contained / utilized in the export item at SI.No.33 and its quantity may be allowed as 16801.90 Kgs as 2.004 Kgs./Kg content in the export item at SI.No.33 after taking 5% recovery from the scrap.
Import item at SI No.34 shall be of relevant grade and size as contained / utilized in the export item at SI.No.34 and its quantity may be allowed as 2912.76 Kgs as 1.81 Kgs./Kg content in the export item at SI.No.34 after taking 5% recovery from the scrap.
Import item at SI No.35 shall be of relevant grade and size as contained / utilized in the export item at SI.No.35 and its quantity may be allowed as 1366.84 Kgs as 2.92 Kgs./Kg content in the export item at SI.No.35 after taking 5% recovery from the scrap.

UDIN00163075AM27

in the export item at SI.No.35 and its quantity may be allowed as 1366.84 Kgs as 2.92 Kgs./Kg content in the export item at SI.No.35 after taking 5% recovery from the scrap.

UDIN00163075AM27

Case No. 65 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM25 RA File Number 03AX04003381 AM25 Licence No and Date 0311037807/10/10/2024 comments of DPIIT dated 16.04.2026, as under: Description , quantities and net weight of export items at SI.No. 1 to 6 under the Advance Authorisation may be specified as under: 1. Quantity Net Weight S.No. Description (in Nos.) (Kgs.) 1 Sheet Metal Parts - Disc (801-0604 C) 52,800 339.60 2 Sheet Metal Parts - Retainer (801-0603 H) 59,800 1534 3 Sheet Metal Parts - Cup Washer (801-1704 B) 42,840 294.45 4 Sheet Metal Parts - Retaining Ring Split (801-3505 D) 4550 27.3 5 Sheet Metal Parts - Cup Washer (937-0053 A) 200 1.40 6 Sheet Metal Parts - Pendel Stop (937-0401 B) 2220 35.52

Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 841.2 Kgs as 2.477 Kgs/Kg content in the export item after taking 5 % recovery from the scrap. UDIN00163075AM27

rt item at Sl.No.9 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 30.6 MT as 1.416 Kgs/Kg 10. UDIN00163075AM27

Case No. 68 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024 The Committee considered the case as per agenda and decided to reject the present application noting that the firm has submitted the reply against DL that they have applied with customs authority for non-utilized certificate. Further that they have surrendered advance licence without utilization. Case stands rejected.

Case No. 69 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004285AM25 RA File Number 03AX04004121 AM25 Licence No and Date 0311038925/22/11/2024 Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 1.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 1. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 2. UDIN00163075AM27

80 The above information may be furnished export product wise. 3.

Case No. 70 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name LECHLER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3.

. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 3. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 4. The above information may be furnished export product wise. 5.

Case No. 71 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED HQ File Number HQRNORM REVIW00000042AM27 RA File Number 03AX04004442 AM25 Licence No and Date 0311039652/16/12/2024 UDIN00163075AM27

81 comments of Meity dated 27.05.2026, as under: Sl.no. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 OPTICAL FIBER CABLES - 72F LT-SM SINGLE SHT.

0163075AM27

81 comments of Meity dated 27.05.2026, as under: Sl.no. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 OPTICAL FIBER CABLES - 72F LT-SM SINGLE SHT. MICRO (G655D)BLUE 64.00 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 4,723.00 KME 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 3,148.80 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 283.29 KGS 2 OPTICAL FIBER CABLES - 96F LT- SM SINGLE SHEATH MICRO CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 213.04 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 2,350.40 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 212.94 KGS 3 OPTICAL FIBER CABLES - 72F LT- SM SINGLE SHEATH MICRO CABLE 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 158.26 KGS OPTICAL FIBER CABLES - 2F SM (G657A1) FIGURE-8 FLAT DROP 4 60.00 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 122.40 KME UDIN00163075AM27

82 CABLE 28.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 2,741.48 KME 28.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,364.44 KGS 5 OPTICAL FIBER CABLES - 96F LT - SM SINGLE SHEATH ADSS CABLE 28.00 KME POLYBUTYLENE TERPTHALATE (PBT) 586.25 KGS 24.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,175.28 KME 24.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,052.59 KGS 6 OPTICAL FIBER CABLES - 48F LT - SM SINGLE SHEATH ADSS CABL 24.00 KME POLYBUTYLENE TERPTHALATE (PBT) 376.16 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 783.04 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 7 OPTICAL FIBER

00 KME POLYBUTYLENE TERPTHALATE (PBT) 376.16 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 783.04 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 7 OPTICAL FIBER CABLES - 24F LT - SM SINGLE SHEATH ADSS CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 334.36 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 392.00 KME OPTICAL FIBER CABLES - 12F LT - SM SINGLE 8 KME UDIN00163075AM27

83 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS SHEATH ADSS CABL 32.00 POLYBUTYLENE TERPTHALATE (PBT) 167.18 KGS 32 SINGLE MODE/MULTIMODE OPTICAL FIBRE 260.80 KME 32 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 9 OPTICAL FIBER CABLES - 8F LT - SM SINGLE SHEATH ADSS CABLE 32 KME POLYBUTYLENE TERPTHALATE (PBT) 167.18 KGS 32 SINGLE MODE/MULTIMODE OPTICAL FIBRE 130.24 KME 32 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 10 OPTICAL FIBER CABLES - 4F LT - SM SINGLE SHEATH ADSS CABLE 32 KME POLYBUTYLENE TERPTHALATE (PBT) 83.75 KGS 28 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,371.16 KME 28 HIGH DENSITY POLYETHYLENE (HDPE) 186.05 KGS 28 POLYBUTYLENE TERPTHALATE (PBT) 139.32 KGS 11 PTICAL FIBER CABLES - 48F LT- SM SINGLE SHEATH MICRO CABLE KME UDIN00163075AM27

28 HIGH DENSITY POLYETHYLENE (HDPE) 186.05 KGS 28 POLYBUTYLENE TERPTHALATE (PBT) 139.32 KGS 11 PTICAL FIBER CABLES - 48F LT- SM SINGLE SHEATH MICRO CABLE KME UDIN00163075AM27

84 73.15 SINGLE MODE/MULTIMODE OPTICAL FIBRE 3,581.42 KME 12 OPTICAL FIBER CABLES - 48F UT SM SINGLE SHEATH UNARMOURED CABLE 73.15 KME POLYBUTYLENE TERPTHALATE (PBT) 446.95 KGS 13 OPTICAL FIBER CABLES - 4F SM G657A2 DOUBLE SHT. FLAME RETARDANT 91.44 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 373.07 KME 162 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,982.88 KME 162 HIGH DENSITY POLYETHYLENE (HDPE) 3,558.10 KGS 14 OPTICAL FIBER CABLES - 12F UT SM SINGLE SHT. WIRE ARM CABLE 162 KME POLYBUTYLENE TERPTHALATE (PBT) 444.94 KGS 9.28 SINGLE MODE/MULTIMODE OPTICAL FIBRE 460.26 KME 15 OPTICAL FIBER CABLES - 12C (4 AWG) X 48F SM HYBRID 9.28 KME POLYBUTYLENE TERPTHALATE (PBT) 128.36 KGS

Case No. 72 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED UDIN00163075AM27

X 48F SM HYBRID 9.28 KME POLYBUTYLENE TERPTHALATE (PBT) 128.36 KGS

Case No. 72 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name APAR INDUSTRIES LIMITED UDIN00163075AM27

85 HQ File Number HQRNORM REVIW00005982AM26 RA File Number 03AX04004442 AM25 Licence No and Date 0311039652/16/12/2024 comments of Meity dated 27.05.2026, as under: Sl.no. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 OPTICAL FIBER CABLES - 72F LT-SM SINGLE SHT. MICRO (G655D)BLUE 64.00 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 4,723.00 KME 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 3,148.80 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 283.29 KGS 2 OPTICAL FIBER CABLES - 96F LT- SM SINGLE SHEATH MICRO CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 213.04 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 2,350.40 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 212.94 KGS 3 OPTICAL FIBER CABLES - 72F LT- SM SINGLE SHEATH MICRO CABLE 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 158.26 KGS UDIN00163075AM27

HIGH DENSITY POLYETHYLENE (HDPE) 212.94 KGS 3 OPTICAL FIBER CABLES - 72F LT- SM SINGLE SHEATH MICRO CABLE 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 158.26 KGS UDIN00163075AM27

86 4 OPTICAL FIBER CABLES - 2F SM (G657A1) FIGURE-8 FLAT DROP CABLE 60.00 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 122.40 KME 28.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 2,741.48 KME 28.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,364.44 KGS 5 OPTICAL FIBER CABLES - 96F LT - SM SINGLE SHEATH ADSS CABLE 28.00 KME POLYBUTYLENE TERPTHALATE (PBT) 586.25 KGS 24.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,175.28 KME 24.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,052.59 KGS 6 OPTICAL FIBER CABLES - 48F LT - SM SINGLE SHEATH ADSS CABL 24.00 KME POLYBUTYLENE TERPTHALATE (PBT) 376.16 KGS 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 783.04 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 7 OPTICAL FIBER CABLES - 24F LT - SM SINGLE SHEATH ADSS CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 334.36 KGS UDIN00163075AM27

HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 7 OPTICAL FIBER CABLES - 24F LT - SM SINGLE SHEATH ADSS CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 334.36 KGS UDIN00163075AM27

87 32.00 SINGLE MODE/MULTIMODE OPTICAL FIBRE 392.00 KME 32.00 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 8 OPTICAL FIBER CABLES - 12F LT - SM SINGLE SHEATH ADSS CABL 32.00 KME POLYBUTYLENE TERPTHALATE (PBT) 167.18 KGS 32 SINGLE MODE/MULTIMODE OPTICAL FIBRE 260.80 KME 32 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 9 OPTICAL FIBER CABLES - 8F LT - SM SINGLE SHEATH ADSS CABLE 32 KME POLYBUTYLENE TERPTHALATE (PBT) 167.18 KGS 32 SINGLE MODE/MULTIMODE OPTICAL FIBRE 130.24 KME 32 HIGH DENSITY POLYETHYLENE (HDPE) 1,404.09 KGS 10 OPTICAL FIBER CABLES - 4F LT - SM SINGLE SHEATH ADSS CABLE 32 KME POLYBUTYLENE TERPTHALATE (PBT) 83.75 KGS 28 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,371.16 KME 28 HIGH DENSITY POLYETHYLENE 186.05 KGS 11 PTICAL FIBER CABLES - 48F LT- SM SINGLE SHEATH MICRO CABLE KME UDIN00163075AM27

S 28 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,371.16 KME 28 HIGH DENSITY POLYETHYLENE 186.05 KGS 11 PTICAL FIBER CABLES - 48F LT- SM SINGLE SHEATH MICRO CABLE KME UDIN00163075AM27

88 (HDPE) 28 POLYBUTYLENE TERPTHALATE (PBT) 139.32 KGS 73.15 SINGLE MODE/MULTIMODE OPTICAL FIBRE 3,581.42 KME 12 OPTICAL FIBER CABLES - 48F UT SM SINGLE SHEATH UNARMOURED CABLE 73.15 KME POLYBUTYLENE TERPTHALATE (PBT) 446.95 KGS 13 OPTICAL FIBER CABLES - 4F SM G657A2 DOUBLE SHT. FLAME RETARDANT 91.44 KME SINGLE MODE/MULTIMODE OPTICAL FIBRE 373.07 KME 162 SINGLE MODE/MULTIMODE OPTICAL FIBRE 1,982.88 KME 162 HIGH DENSITY POLYETHYLENE (HDPE) 3,558.10 KGS 14 OPTICAL FIBER CABLES - 12F UT SM SINGLE SHT. WIRE ARM CABLE 162 KME POLYBUTYLENE TERPTHALATE (PBT) 444.94 KGS 9.28 SINGLE MODE/MULTIMODE OPTICAL FIBRE 460.26 KME 15 OPTICAL FIBER CABLES - 12C (4 AWG) X 48F SM HYBRID 9.28 KME POLYBUTYLENE TERPTHALATE (PBT) 128.36 KGS

UDIN00163075AM27

SINGLE MODE/MULTIMODE OPTICAL FIBRE 460.26 KME 15 OPTICAL FIBER CABLES - 12C (4 AWG) X 48F SM HYBRID 9.28 KME POLYBUTYLENE TERPTHALATE (PBT) 128.36 KGS

UDIN00163075AM27

Case No. 73 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004863AM25 RA File Number 56AX04000395 AM25 Licence No and Date 5611003493/18/12/2024 comments of DPIIT dated 21.04.2026, as under: Quantity of export item may also be specified as 420 Nos.in addition to its weight. 1. The weight of export item may be modified as 71,405 MT. 2. Quantity of import item may be allowed as 420 Nos on net to net basis. However, duty free weight of this item may be allowed as 1,02,822 Kgs as 1.44 Kgs./Kg. Content in the export item after taking 20 % recovery from the scrap.
3.

Case No. 74 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED HQ File Number HQRNORM REVIW00001712AM26 RA File Number 09AX04000788 AM25 Licence No and Date 0911008673/20/12/2024 comments of consultant (SKB) dated 11.05.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE AND QUANTITY TO BE ALLOWED 1 TURBINE PARTS 32 NOS ( (STEEL CASTING, 2920.00 KGS UDIN00163075AM27

SKB) dated 11.05.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE AND QUANTITY TO BE ALLOWED 1 TURBINE PARTS 32 NOS ( (STEEL CASTING, 2920.00 KGS UDIN00163075AM27

90 (MADE FROM STEEL CASTING, GRADE: FV507, CT INNER CASING, C1/MW33012) 1696.00 KGS) GRADE: FV507,) CT INNER CASING (C1/MW33012)

QTY: 32 NOS (3136.00 KGS) INCLUSIVE 72.17% ON THE NET WEIGHT OF THE EXPORT PRODUCT. 2 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,) CT CASING CARRIER (C1/MW33021), 58 NOS ( 1125.20 KGS) (STEEL CASTING, GRADE: FV507,) RING CT CASING CARRIER (C1/MW33021) QTY: 58 NOS ( 2088.00 KGS) 1943.58 KGS INCLUSIVE 72.73% ON THE NET WEIGHT OF THE EXPORT PRODUCT. 3 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,) RETAINING RING CT1 SHROUD (C1/MW33044) 37 NOS ( 189.81 KGS) (STEEL CASTING, GRADE: FV507,) RETAINING RING CT1 SHROUD (C1/MW33044) QTY: 37 NOS ( 518.00 KGS) 468.77 KGS INCLUSIVE 146.97% ON THE NET WEIGHT OF THE EXPORT PRODUCT. 4 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,) RETAINING RING CT2 SHROUD (C1/MW33344) 57 NOS ( 961.02 KGS) (STEEL CASTING, GRADE: FV507,) RETAINING RING CT2 SHROUD (C1/MW33344) QTY: 57 NOS (2052.00 KGS) 1888.30 KGS INCLUSIVE 96.49% ON THE NET WEIGHT OF THE EXPORT PRODUCT. 5 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,) PT2 CARRIER RING (C1/MW33611) 1 NOS (79.96 KGS) (STEEL CASTING, GRADE: FV507,) PT2 CARRIER RING (C1/MW33611) QTY: 1 NOS (118.00 KGS) 112.30 KGS INCLUSIVE 40.44% ON

ADE: FV507,) PT2 CARRIER RING (C1/MW33611) 1 NOS (79.96 KGS) (STEEL CASTING, GRADE: FV507,) PT2 CARRIER RING (C1/MW33611) QTY: 1 NOS (118.00 KGS) 112.30 KGS INCLUSIVE 40.44% ON THE NET WEIGHT OF THE EXPORT PRODUCT. TURBINE PARTS 10 NOS ( (STEEL CASTING, 1702.40 KGS 6 UDIN00163075AM27

91 (MADE FROM STEEL CASTING, GRADE: FV507,) STATOR LOCATION RING (C1/MW33614A) 866.00 KGS) GRADE: FV507) STATOR LOCATION RING (C1/MW33614A) QTY: 10 NOS ( 1850.00 KGS) INCLUSIVE 96.58% ON THE NET WEIGHT OF THE EXPORT PRODUCT.

7 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,) HP NOZZLE SPACER RING (C1/RU33021) 14 NOS ( 126.00 KGS) (STEEL CASTING, GRADE: FV507,) HP NOZZLE SPACER RING (C1/RU33021) QTY: 14 NOS ( 238.00 KGS) 221.20 KGS INCLUSIVE 75.55% ON THE NET WEIGHT OF THE EXPORT PRODUCT. 8 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507), STATOR SEAL RING STAGE 1 (C1/RU33621), (NET CONTENT OF IMPORT ITEM SHALL BE 62.50 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE) 25 NOS ( 62.50 KGS) (STEEL CASTING, GRADE: FV507,) STATOR SEAL RING STAGE 1 (C1/RU33621)

QTY: 250 KGS 221.88 KGS INCLUSIVE OF 255% ON THE NET WEIGHT OF THE EXPORT PRODUCT. TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507), STATOR SEAL RING STAGE 2 (C1/RU33622), (NET CONTENT OF IMPORT ITEM SHALL BE 39.20 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS 9 14 NOS ( 39.20 KGS) (STEEL CASTING, GRADE: FV507) STATOR SEAL RING STAGE 2 (C1/RU33622)

QTY: 126 KGS 112.98

ITEM SHALL BE 39.20 KG, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS 9 14 NOS ( 39.20 KGS) (STEEL CASTING, GRADE: FV507) STATOR SEAL RING STAGE 2 (C1/RU33622)

QTY: 126 KGS 112.98 KGS INCLUSIVE OF 188.21 % ON THE NET WEIGHT
OF THE EXPORT PRODUCT. UDIN00163075AM27

92 AND INVOICE) 10 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507,)CASTING -CT INNER( C1/MJ33312), 11 NOS ( 913.11 KGS) (STEEL CASTING, GRADE: FV507) CASTING -CT INNER(C1/MJ33312) QTY: 11 NOS (1947.00 KGS) 1791.89 KGS INCLUSIVE OF 96.24% ON THE NET WEIGHT
OF THE EXPORT PRODUCT. 11 TURBINE PARTS (MADE FROM STEEL CASTING, GRADE: FV507) RING SUPPORT NGV SEGMENTS, (C1/ RW33321) 34 NOS ( 1737.74 KGS) (STEEL CASTING, GRADE: FV507) RING SUPPORT NGV SEGMENTS, (C1/ RW33321) QTY: 34 NOS (2652.00 KGS) 2514.50 KGS INCLUSIVE OF 44.70% ON THE NET WEIGHT
OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF IMPORTED CASTING SHOULD MATCH THE GRADE OF THE EXPORT PRODUCTS.

Case No. 75 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name OTRIVA INDUSTRIES LLP Meeting Number and Date HQ File Number HQRNORM REVIW00004153AM26 RA File Number 34AX04000737 AM25 Licence No and Date 3411005848/23/12/2024 WHAT IS THE WEIGHT OF EACH SILO OF 365 m3 SET AND ALSO WHAT IS THE WEIGHT OF THE BIN? 1. SUBMIT COMPLETE DETAILS OF THE REQUIREMENT OF THE IMPORTED ITEM. 2. UDIN00163075AM27

3411005848/23/12/2024 WHAT IS THE WEIGHT OF EACH SILO OF 365 m3 SET AND ALSO WHAT IS THE WEIGHT OF THE BIN? 1. SUBMIT COMPLETE DETAILS OF THE REQUIREMENT OF THE IMPORTED ITEM. 2. UDIN00163075AM27

93 SUBMIT COLOURED DRAWINGS OF THE SILO AND DAY BIN, WHICH SHOULD INDICATE THE DIMENSIONS OF EACH IMPORTED ITEM CLEARLY. 3. HOW WAS THE QUANTITY OF EACH IMPORTED ITEM CALCULATED? SUBMIT AN EXCEL SHEET THAT SHOULD INDICATE THE REQUIREMENT OF THE ALUMINIUM PLATE AND CHECKER PLATE OF EACH THICKNESS, WASTAGE, AND NET WEIGHT GOING IN THE EXPORT PRODUCT. 4. SUBMIT THE DIMENSION OF THE IMPORTED CHECKER PLATE AND THE DIMENSION OF THE CHECKER PLATE IN THE EXPORT PRODUCT, AND ALSO WHAT KIND OF PROCESS IS INVOLVED TO ARRIVE AT THE REQUIRED WASTAGE. SUBMIT THE SAME DETAILS ON IMPORTED ALUMINIUM PLATES ALSO. 5.

Case No. 76 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name TRAILER LOUAULT INDIA PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Apr/ 202627/ 1 and 23/04/2026 HQ File Number HQRNORM APPLY 00005035AM25 RA File Number 31AX04000310 AM25 Licence No and Date 3111004234/24/12/2024 comments of (SKB) dated 19.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORTS AND QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED CHASSIS (PARTS AND ACCESSORIES OF TRAILERS)

WEIGHT OF IMPORTED ITEMS: 20144.208 KGS

4663.33 KGS INCLUSIVE OF 11% WASTAGE ON THE NET WEIGHT OF IMPORTED MS SHEETS OF 2 MM THICKNESS IN THE EXPORT 1 48 NOS ( 41040.00 KGS) MS SHEETS (THICKNESS 2 MM )

QTY: 4913.00 KGS UDIN00163075AM27

IVE OF 11% WASTAGE ON THE NET WEIGHT OF IMPORTED MS SHEETS OF 2 MM THICKNESS IN THE EXPORT 1 48 NOS ( 41040.00 KGS) MS SHEETS (THICKNESS 2 MM )

QTY: 4913.00 KGS UDIN00163075AM27

94 PRODUCT. MS SHEETS (THICKNESS 3 MM TO 4.75 MM)

QTY: 11858.00 KGS 11245.06 KGS INCLUSIVE OF 11% WASTAGE ON THE NET WEIGHT OF IMPORTED MS SHEETS OF 3 MM TO 4.75 MM THICKNESS IN THE EXPORT PRODUCT. WEIGHT OF INDIGENOUS INPUTS: 20895.792 MS TUBES (THICKNESS 4 MM )

QTY: 6895.00 KGS 6509.80 KGS INCLUSIVE OF 12% WASTAGE ON THE NET WEIGHT OF IMPORTED MS SHEETS OF 2 MM THICKNESS IN THE EXPORT PRODUCT.

NOTE: THE THICKNESS OF IMPORTED MS SHEETS AND TUBES SHOULD MATCH THE THICKNESS OF MS SHEETS & TUBES GOING IN THE EXPORT PRODUCT

Case No. 77 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005074AM25 RA File Number 33AX04000101 AM25 Licence No and Date 3311002436/26/12/2024 UDIN00163075AM27

Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005074AM25 RA File Number 33AX04000101 AM25 Licence No and Date 3311002436/26/12/2024 UDIN00163075AM27

95 COLOURED DRAWING OF THE EXPORT PRODUCT WITH COMPLETE DIMENSIONS OF THE FINISHED PRODUCT AND ALSO THE SIZE OF THE IMPORTED ITEMS, WHICH IS REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT. 1. WHAT IS THE WEIGHT OF THE INPUT ITEM, AND ALSO THE WEIGHT OF THE FINISHED PRODUCT? 2. SUBMIT APPENDIX 4E ON THE WASTAGE TO BE CLAIMED ON A NET-TO-NET BASIS OF THE IMPORTED INPUTS AND ALSO THE DETAILS OF THE INDIGENOUS ITEM, IF ANY, IN THE TABLE. 3. SUBMIT DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION. 4.

Case No. 78 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005082AM25 RA File Number 31AX04000343 AM25 Licence No and Date 3111004240/26/12/2024 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of DPIIT dated 18.05.2026, as under:

Net weight of export items at SI.No.1 to 8 may be specified as under:
S.No. Net weight (Kgs) S.No. Net weight (Kgs) 1 710 5 50 2 942.52 6 50 3 1117.03 7 45 4 889.33 8 45 UDIN00163075AM27

nder:

Net weight of export items at SI.No.1 to 8 may be specified as under:
S.No. Net weight (Kgs) S.No. Net weight (Kgs) 1 710 5 50 2 942.52 6 50 3 1117.03 7 45 4 889.33 8 45 UDIN00163075AM27

96 2. Import item at Sl.No.1 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as applied for i.e 646 Kgs as 1.029 Kgs/Kg content in the export item. 3. Import item at Sl.No.2 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 4.62 Kgs as 2.53 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 4. Import item at Sl.No.3 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 5.36 Kgs as 3.43 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 5. Import item at Sl.No.4 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 2.054 Kgs as 3.73 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 6. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 15.234 Kgs as 4.08 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 7.

d diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 15.234 Kgs as 4.08 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 7. Import item at Sl.No.6 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 1.85 Kgs as 2.28 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 8. Import item at Sl.No.7 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 37.06 Kgs as1.54 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 9. Import item at Sl.No.8 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 9.816 Kgs 1.93 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 10. Import item at Sl.No.9 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 24.864 Kgs 1.89 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 11. Import item at Sl.No.10 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as applied for i.e 24.93 Kgs as 1.008 Kgs/Kg content in the export item. 12.

ll be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as applied for i.e 24.93 Kgs as 1.008 Kgs/Kg content in the export item. 12. Import item at Sl.No.11 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.1
and its quantity may be allowed as 7.22 Kgs 1.06 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 13. Import item at Sl.No.12 shall be of relevant grade and size as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 804 Kgs as 1.01 Kgs/Kg content in the export item. 14. Import item at Sl.No.13 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 4.14 Kgs as 2.32 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 15 . Import item at Sl.No.14 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 4.84 Kgs as 2.24 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 16. Import item at Sl.No.15 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 37.68 Kgs as 2.60 Kgs/Kg content in the export item after taking 20% recovery from the scrap. UDIN00163075AM27

ontained/utilized in the export item at SI.No.2
and its quantity may be allowed as 37.68 Kgs as 2.60 Kgs/Kg content in the export item after taking 20% recovery from the scrap. UDIN00163075AM27

97 17. Import item at Sl.No.16 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 2.16 Kgs as 1.58 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 18. Import item at Sl.No.17 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 92.28 Kgs as 2.09 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 19. Import item at Sl.No.18 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 20.35 Kgs 1.92 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 20. Import item at Sl.No.19 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as applied for i.e 29.02 Kgs 1.02 Kgs/Kg content in the export item. 21. Import item at Sl.No.20 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as applied for i.e 35.37 Kgs 1.014 Kgs/Kg content in the export item. 22.

ll be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as applied for i.e 35.37 Kgs 1.014 Kgs/Kg content in the export item. 22. Import item at Sl.No.21 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.2
and its quantity may be allowed as 30.27 Kgs as 2.41 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 23. Import item at Sl.No.22 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 5.50 Kgs as 2.04 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 24. Import item at Sl.No.23 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 6.85 Kgs as 2.03 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 25. Import item at Sl.No.24 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 2.73 Kgs as 3.75 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 26. Import item at Sl.No.25 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 33.60 Kgs as 3.88 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 27.

nd diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 33.60 Kgs as 3.88 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 27. Import item at Sl.No.26 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 85.88 Kgs as 1.48 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 28. Import item at Sl.No.27 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 14.78 Kgs as 1.69 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 29. Import item at Sl.No.28 shall be of relevant grade and size as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as applied for i.e 926.50 Kgs as 1.02 Kgs/Kg content in the export item. 30. Import item at Sl.No.29 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 4.44 Kgs as 1.78 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 31. Import item at Sl.No.30 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 59.76 Kgs as 1.83 Kgs/Kg content in the export item after taking 20% recovery from the scrap. UDIN00163075AM27

contained/utilized in the export item at SI.No.3
and its quantity may be allowed as 59.76 Kgs as 1.83 Kgs/Kg content in the export item after taking 20% recovery from the scrap. UDIN00163075AM27

98 32. Import item at Sl.No.31 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as applied for i.e 12.35 Kgs as 1.03 Kgs/Kg content in the export item. 33. Import item at Sl.No.32 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.3
and its quantity may be allowed as applied for i.e 89.93 Kgs as 1.003 Kgs/Kg content in the export item. 34 . Import item at Sl.No.33 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 4.06 Kgs as 2.86 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 35 . Import item at Sl.No.34 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 4.84 Kgs as 2.28 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 36 . Import item at Sl.No.35 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 26.22 Kgs as 39.13 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 37 .

diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 26.22 Kgs as 39.13 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 37 . Import item at Sl.No.36 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 2.14 Kgs as 1.71 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 38 . Import item at Sl.No.37 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 69.21 Kgs as 2.09 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 39 . Import item at Sl.No.38 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as 15.26 Kgs as 1.93 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 40 . Import item at Sl.No.39 shall be of relevant grade and size as contained/utilized in the export item at SI.No.4 and its quantity may be allowed as applied for i.e 804 Kgs as 1.027 Kgs/Kg content in the export item. 41. Import item at Sl.No.40 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as applied for i.e 10.88 Kgs as 1.04 Kgs/Kg content in the export item. 42 .

l be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as applied for i.e 10.88 Kgs as 1.04 Kgs/Kg content in the export item. 42 . Import item at Sl.No.41 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as applied for i.e 35.43 Kgs as 1.008 Kgs/Kg content in the export item. 43 . Import item at Sl.No.42 shall be of relevant grade and diameter as contained/utilized in the export item at SI.No.4
and its quantity may be allowed as 30.91 Kgs as 1.96 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 44. Quantity of import items at Sl.No. 43 to 46 may be allowed on net to net basis with accountability clause in export items at Sl.No, 5 to 8 respectively.

Case No. 79 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005195AM25 UDIN00163075AM27

vely.

Case No. 79 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005195AM25 UDIN00163075AM27

99 RA File Number 05AX04003339 AM25 Licence No and Date 0511029962/30/12/2024 comments of DPIIT dated 27.02.2026, as under: Net weight of export item may be specified as 2,210 Kgs.
1. Quantity of import items at Sl.No.1 to 5, 7 to 13, 16 to 25 & 27 to 69 may be allowed on net to net basis with accountability clause. 2. Quantity of import items at Sl.No. 6, 14, 15 & 26 may be allowed on net to net basis i.e. 1 .0 Meter/meter content in the export item as claimed by the firm 3.

Case No. 80 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name FREUDENBERG GALA HOUSEHOLD PRODUCT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005338AM25 RA File Number 03AX04004523 AM25 Licence No and Date 0311040104/02/01/2025 SUBMIT COLOURED PHOTOGRAPH OF THE EXPORT PRODUCT AND ALSO INDICATE THE POSITION OF THE IMPORTED PARTS IN THE EXPORT PRODUCT? 1. AS PER APPENDIX 4E, INDIGENOUS INPUT IS NIL. SINCE THE COMPONENTS ARE COMING IN NUMBERS, WHAT ARE THE MANUFACTURING ACTIVITIES WILL BE INVOLVED? 2. SUBMIT A DETAILED NOTE ON THE MANUFACTURING OF EXPORT PRODUCT. 3. COMPLETE JUSTIFICATION OF THE WASTAGE @10% ON THE IMPORTED PARTS. 4.

Case No. 81 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date UDIN00163075AM27

HE WASTAGE @10% ON THE IMPORTED PARTS. 4.

Case No. 81 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name SHIRODKAR PRECI COMP PRIVATE LIMITED Meeting Number and Date UDIN00163075AM27

100 HQ File Number HQRNORM REVIW00000017AM27 RA File Number 31AX04000367 AM25 Licence No and Date 3111004291/07/01/2025 comments of DPIIT dated 15.04.2026, as under: Net weight of export items at Sl.No. 1 to 5 may be specified as 94,396 Kgs., 89,398 Kgs. , 50,814 Kgs , 72,906 Kgs & 36,795 Kgs. Respectively.
1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 130879 Kgs as 1.386 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 139479 Kgs as 1.56 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 78163 Kgs as 1.538 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 134581 Kgs as 1.845 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 5.

and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 134581 Kgs as 1.845 Kgs/Kg content in the export item after taking 20% recovery from the scrap. 5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 47359 Kgs as 1.287 Kgs/Kg content in the export item after taking 20% recovery from the scrap.. 6. Note: Firm vide their letter dated 30.03.2026 has also requested for amendment in the description and HSN code of export items at Sl,No, 2 to 5 due to changes in US tariffs. And the same be allowed as per policy.

Case No. 82 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005522AM25 RA File Number 07AX04001637 AM25 Licence No and Date 0711013292/08/01/2025 UDIN00163075AM27

101 comments of Tech-3 dated 03.05.2026, as under: EP- 1 to 3 & 7 to 10 Add wt.638.3 kg. 4 to 6 Add wt. 2.53 kg. Import 1 to 3 & 7 to 10- 4790 kg. Including 650% average wastage 4 to 6- 180 kg.

Tech-3 dated 03.05.2026, as under: EP- 1 to 3 & 7 to 10 Add wt.638.3 kg. 4 to 6 Add wt. 2.53 kg. Import 1 to 3 & 7 to 10- 4790 kg. Including 650% average wastage 4 to 6- 180 kg. Including 7000% average wastage Grade of import item will be same as used in EP

Case No. 83 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005587AM25 RA File Number 07AX04001678 AM25 Licence No and Date 0711013322/10/01/2025 comments of Tech-3 dated 13.05.2026, as under: EP 1 to 13 - Add total .wt.566.329 kg. Import 1 to 13 -Total wt. 4530 kg. Including 700 % average wastage Grade of import item will be same as used in EP

Case No. 84 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number UDIN00163075AM27

102 and Date HQ File Number HQRNORM APPLY 00005626AM25 RA File Number 07AX04001688 AM25 Licence No and Date 0711013332/13/01/2025 comments of Tech-3 dated 03.05.2026, as under: EP- Add wt.1-25 kg.,2-31 kg.,3-37 kg., 4- 8 kg.,5-5 kg.,6-565 kg.,7-25 kg. Import 1- 225 kg. Including 800 % wastage 2- 325 kg. Including 950 % wastage 3- 245 kg. Including 560 % wastage 4- 185 kg. Including 2200 % wastage 5- 35 kg. Including 580 % wastage 6- 3450 kg. Including 510 % wastage 7- 140 kg.

g. Including 560 % wastage 4- 185 kg. Including 2200 % wastage 5- 35 kg. Including 580 % wastage 6- 3450 kg. Including 510 % wastage 7- 140 kg. Including 450 % wastage Grade of import item will be same as used in EP

Case No. 85 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005667AM25 RA File Number 07AX04001700 AM25 Licence No and Date 0711013356/15/01/2025 UDIN00163075AM27

103 comments of Tech-3 dated 03.05.2026, as under: EP - Add wt. 136.4 kg. Import - 1500 kg. Including 1000% wastage Grade of import item will be same as used in EP

Case No. 86 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAINI PRECISION PRODUCTS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005816AM25 RA File Number 07AX04001753 AM25 Licence No and Date 0711013433/23/01/2025 comments of Tech-3 dated 03.05.2026, as under: EP- Add wt.1-22.7 kg.,2-351.2 kg.,3-18 kg., 4- 87.4 kg.,. 5-10 kg.,6-10 kg.,7-42.9 kg Import 1- 295 kg. Including 1200 % wastage 2- 3160 kg. Including 800 % wastage 3- 135 kg. Including 650 % wastage 4- 350 kg. Including 300 % wastage 5- 90 kg. Including 800 % wastage UDIN00163075AM27

2- 3160 kg. Including 800 % wastage 3- 135 kg. Including 650 % wastage 4- 350 kg. Including 300 % wastage 5- 90 kg. Including 800 % wastage UDIN00163075AM27

104 6- 80 kg. Including 700 % wastage 7-44 kg. With3 % wastage as applied Grade of import item will be same as used in EP

Case No. 87 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005928AM25 RA File Number 09AX04000999 AM25 Licence No and Date 0911008937/29/01/2025 comments of consultant (SKB) dated 19.04.2026, as under: SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED 1 PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM STEEL BAR, GRADE: 15-5 PH) NET CONTENT OF IMPORT ITEM SHALL BE 234.08 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 418 NOS STEEL BAR, GRADE: 15-5 PH QTY:

2466.20 KGS 2131.37 KGS INCLUSIVE OF 810.53% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. PRECISION COMPONENTS FOR AIRCRAFT (MADE FROM STEEL PLATE, GRADE: 13-8 PH) NET CONTENT OF IMPORT ITEM SHALL BE 111.00 KGS, WHICH SHOULD BE 2 740 NOS STEEL BAR, GRADE: 13-8 PH QTY: 1073 KGS 929.00 KGS INCLUSIVE OF 736.94 % WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00163075AM27

HALL BE 111.00 KGS, WHICH SHOULD BE 2 740 NOS STEEL BAR, GRADE: 13-8 PH QTY: 1073 KGS 929.00 KGS INCLUSIVE OF 736.94 % WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00163075AM27

105 REFLECT IN THE SHIPPING BILLS AND INVOICE. 3 PRECISION COMPONENTS FOR AIRCRAFT
(MADE FROM STEEL BAR, GRADE: 321) NET CONTENT OF IMPORT ITEM SHALL BE 312.90 KGS, WHICH SHOULD BE REFLECT IN THE SHIPPING BILLS AND INVOICE. 447 NOS STEEL BAR, GRADE: 321 QTY: 2682 KGS

2327.54 KGS INCLUSIVE OF 643.86 % WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. NOTE: THE GRADE OF IMPORTED STEEL BARS SHOULD MATCH THE GRADE OF THE EXPORT PRODUCTS.

Case No. 88 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005965AM25 RA File Number 31AX04000399 AM25 Licence No and Date 3111004383/30/01/2025 Case deferred for the DL reply of the firm.

Case No. 89 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name FRIZAIR PRIVATE LIMITED (PART IX) HQ File Number HQRNORM APPLY 00006062AM25 RA File Number 09AX04001042 AM25 Licence No and Date 0911009007/07/02/2025 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB)
dated 22.04.2026, as under: UDIN00163075AM27

d Date 0911009007/07/02/2025 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB)
dated 22.04.2026, as under: UDIN00163075AM27

106 SL No ITEM OF EXPORT QUANTITY IN NUMBER & IN WEIGHT ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED RELEVANT COPPER TUBES REFRIGERATION ON QUALITY- DIA. 1/8" TO 1/2"

QTY: 41472.00 KGS WEIGHT OF COPPER TUBES IN THE EXPORT PRODUCT. RELEVANT ALUMINIUM FIN STOCK THICKNESS 0.10 MM TO 0.20 MM

QTY: 71424.00 KGS 1.02 KG/KG ON THE NET WEIGHT OF COPPER TUBES IN THE EXPORT PRODUCT. BRAZING MATERIALS

QTY: 576 KGS 0.5% OF THE FOB VALUE. 1 CONDENSER/EVAPORATOR COILS USED AS HEAT EXCHANGERS FOR AIR CONDITIONING AND REFRIGERATION PURPOSE-R42. 57600 NOS (123840.00 KGS) U BENDS AND TRIPODS

QTY: 3951.36 KGS NET TO NET UNDER GN- 4 WITH ACCOUNTABILITY CLAUSE. NOTE: THE SIZE (OD &ID) OF THE IMPORTED COPPER TUBES & ALUMINIUM FINS SHOULD MATCH WITH THE OD & ID OF THE COPPER TUBES & ALUMINIUM FINS USED IN THE EXPORT PRODUCT.

Case No. 90 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name TECNICAS REUNIDAS ENGINEERS INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00006068AM25 RA File Number 07AX04001790 AM25 Licence No and Date 0711013586/07/02/2025 UDIN00163075AM27

ved Party Name TECNICAS REUNIDAS ENGINEERS INDIA PRIVATE LIMITED HQ File Number HQRNORM APPLY 00006068AM25 RA File Number 07AX04001790 AM25 Licence No and Date 0711013586/07/02/2025 UDIN00163075AM27

107 comments of consultant (SKB) dated 24.04.2026, as under: SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED WROUGHT FITTINGS, 2", 6", 8" SCH 80 45 DEG, 90 DEG, 180 DEG, SR, LR ELBOW, ECCENTRIC REDUCER, BEVELLED END FITTINGS (190 - NOS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. FORGED FITTINGS, 1.5", 2" ND SCH XXS, SCH 80 WELDOLET AND ELBOWLET FITTINGS (26 - NOS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. STRUCTURAL PROFILES, HEB 1.015 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, HEB STRUCTURAL PROFILES, UPN 1.015 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, UPN STRUCTURAL PROFILES, UC 1.015 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, UC 1 CONVECTION MODULE, INDUSTRIAL OR LABORATORY FURNACES AND OVENS, INCLUDING INCINERATORS, NON- ELECTRIC -PARTS (PARTS OF INDUSTRIAL FURNACES AND OVENS) 3 NOS UDIN00163075AM27

LE, UC 1 CONVECTION MODULE, INDUSTRIAL OR LABORATORY FURNACES AND OVENS, INCLUDING INCINERATORS, NON- ELECTRIC -PARTS (PARTS OF INDUSTRIAL FURNACES AND OVENS) 3 NOS UDIN00163075AM27

108 STRUCTURAL PROFILES, ROD 1.015 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, ROD STRUCTURAL PROFILES, ANGLE 1.015 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, ANGLE FASTENERS, STUD, BOLTS, NUTS AND WASHERS (6135

NOS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. WROUGHT FITTINGS 2", 6", 8" SCH 80 45 DEG, 90 DEG, 180 DEG, SR, LR ELBOW, ECCENTRIC REDUCER, BEVELLED END FITTINGS (190 - NOS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. FORGED FITTINGS, 1.5", 2" ND SCH XXS, SCH 80 WELDOLET AND ELBOWLET FITTINGS (13 - NOS) NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 2 RADIANT COILS, INDUSTRIAL OR LABORATORY FURNACES AND OVENS, INCLUDING INCINERATORS, NON- ELECTRIC -PARTS (PARTS OF INDUSTRIAL FURNACES AND OVENS) 3 NOS STRUCTURAL PROFILES UC 1.01 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, UC UDIN00163075AM27

INCINERATORS, NON- ELECTRIC -PARTS (PARTS OF INDUSTRIAL FURNACES AND OVENS) 3 NOS STRUCTURAL PROFILES UC 1.01 KG/KG ON THE NET WEIGHT OF THE STRUCTURAL PROFILE, UC UDIN00163075AM27

109

Case No. 91 / NC/1/MEET/Apr/202627/1 Case Status Case Rejected Party Name VINAYAKA INDUSTRIAL ENTERPRISES, Meeting Number and Date HQ File Number HQRNORM APPLY 00006146AM25 RA File Number 07AX04001770 AM25 Licence No and Date 0711013625/11/02/2025 The Committee considered the case as per agenda and decided to reject the present review application noting that the firm has submitted non utilization certificate issued by customs in regard of the present licence number. Case stands rejected.

Case No. 92 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name MAKSTEEL WIRE HEALDS PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00006258AM25 RA File Number 34AX04000995 AM25 Licence No and Date 3411006099/17/02/2025 comments of DPIIT dated 11.05.2026, as under: 1..Import item at Sl.No. 1 shall be of relevant grade as contained in export item at Sl.No.1 and its quantity may be allowed as applied for i.e. 4209 Kgs. As 1.005 Kgs./Kg. Content in the export item. 2..Import item at Sl.No. 2 shall be of relevant grade as contained in export item at Sl.No.2 and its quantity may be allowed as applied for i.e. 4020 Kgs. As 1.005 Kgs./Kg. Content in the export item. 3. Import item at Sl.No. 3 shall be of relevant grade as contained in export item at Sl.No.3 and its quantity may be allowed as applied for i.e. 2010 Kgs. As 1.005 Kgs./Kg.

nt in the export item. 3. Import item at Sl.No. 3 shall be of relevant grade as contained in export item at Sl.No.3 and its quantity may be allowed as applied for i.e. 2010 Kgs. As 1.005 Kgs./Kg. Content in the export item.

UDIN00163075AM27

110 Case No. 93 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00006312AM25 RA File Number 05AX04003603 AM25 Licence No and Date 0511031012/20/02/2025

Submit a coloured, neat sketch of each item of export.
Submit process flow chart. What is the weight of the export product?
Will the export product use indigenous inputs? If yes, furnish the list of items to be exported along with the imported item?
What is the total weight of the export product? Please indicate the weight of the imported items and also the weight of the indigenous items separately.

Case No. 94 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006434AM25 RA File Number 31AX04000410 AM25 Licence No and Date 3111004462/25/02/2025 comments of Tech-3 dated 23.04.2026, as under: EP- 25,26 & 33 - Deleted as description of EP & corresponding import item is same. Import - 1 to 30 & 33 to 38- Net wt. Of component made out of relevant imported RM + 10 % wastage UDIN00163075AM27

Deleted as description of EP & corresponding import item is same. Import - 1 to 30 & 33 to 38- Net wt. Of component made out of relevant imported RM + 10 % wastage UDIN00163075AM27

111 31,32 & 39 - Deleted as EP and import item is same Grade & thickness of import items will be same as used in EP

Case No. 95 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name PARVEEN INDUSTRIES PVT LTD Meeting Number and Date HQ File Number HQRNORM REVIW00006555AM26 RA File Number 03AX04006052 AM25 Licence No and Date 0311041821/04/03/2025 comments of DPIIT dated 11.05.2026, as under: Quantity of export item at Sl.No.1 may be specified as 200 Nos.(20,208 Kgs) . 1. Import item at Sl.No.1 shall be of relevant grade and size as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 1.02 Kgs/Kg content in the export item . 2.

Case No. 96 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006614AM25 RA File Number 34AX04001040 AM25 Licence No and Date 3411006160/07/03/2025 comments of DPIIT dated 25.05.2026, as under: Description, quantities and net weight of export items at SI.No.1 & 2 may be specified as under: 1.

UDIN00163075AM27

and Date 3411006160/07/03/2025 comments of DPIIT dated 25.05.2026, as under: Description, quantities and net weight of export items at SI.No.1 & 2 may be specified as under: 1.

UDIN00163075AM27

112 Finished Weight SI.No. Description of export item at SI.No.1 Sub Category Quantity (In Nos.) (In Kgs) Turbine Components Fastners (Made of Alloy Steel Round Bar) 1 PW3004B840020 NUT 16 6.08 2 STE-460B498026 NUT 4 3.24 3 PW3004B840020 NUT 8 3.04 4 PPS-199A3054P0001-SF Lever 2 45.4 5 PPS-363B414H07-SF Washer 61 4.27 6 PPS-363B413H07-SF Washer 51 4.08 7 PPS-U615X000P0221 Nut 27 190.08 8 PPS-T28B629P009-SF Washer 79 11.06 9 PPS-T28B630P009-SF Washer 87 8.7 10 PPS-PH-00456-05-SF Washer 9 1.17 11 PPS-101A775AF-2-SF Pin 4 5.32 12 PPS-363B412H08-SF Washer 7 0.14 13 PPS-626C999003 NUT 4 24 14 PPS-G2-01150-01 Pin 184 64.4 UDIN00163075AM27

113 15 PPS-U605P222L2512 stud 2 68.52 16 PPS-F404A112-SF NUT 12 3.6 17 PPS-U623P210L0475 Bolt 16 13.76 18 PPS-101A634BC-122 Screw 6 2.04 19 PPS-T2-A0017-75/160.0/AD Nut 4 37.52 20 PPS-201T259001-SF Bushing 4 3.2 21 PPS-HTCT409613P0020 Bushing 28 1.204 22 PPS-143A6059P0001-SF Bushing 1 0.86 23 PPS-460B498020 NUT 25 9.5 24 PPS-626C996013 Bolt 6 24.84 25 PPS-U615X000P0221 NUT 80 566.4 26 PPS-U623P210L0475 Bolt 33 29.04 27 PPS-F600A125020 Screw 2 1.48 28 PPS-F600A125020 Screw 18 13.32 29 PPS-U624P210L0850 Screw 7 9.38 30 PPS-U624P212L0950 Screw 6 13.62 31 PPS-N26-162-0022-09 NUT 8 25.36 32 PPS-U627P204L0237 Bolt 16 1.12 UDIN00163075AM27

ew 2 1.48 28 PPS-F600A125020 Screw 18 13.32 29 PPS-U624P210L0850 Screw 7 9.38 30 PPS-U624P212L0950 Screw 6 13.62 31 PPS-N26-162-0022-09 NUT 8 25.36 32 PPS-U627P204L0237 Bolt 16 1.12 UDIN00163075AM27

114 33 PPS-U605P216L1325 stud 35 139.3 34 PPS-U613X000P0204-SF NUT 14 0.28 35 PPS-134B273AR-1 Screw 5 0.3 36 PPS-DHA-CP-10221 Bolt 160 22.4 37 PPS-363B414H08-SF Washer 3 0.33 38 PPS-363B413H08-SF Washer 3 0.3 39 PPS-363B414H11-SF Washer 12 3.012 40 PPS-U615X000P0218 NUT 25 74 41 PPS-U615X000P0218 NUT 58 171.68 42 PPS-U615X000P0218 NUT 1 2.96 43 PPS-363B414H08-SF Washer 16 1.728 44 PPS-363B413H05-SF Washer 24 0.84 45 PPS-363B414H05-SF Washer 21 0.798 46 PPS-U615X000P0218 NUT 106 324.36 47 PPS-U624P210L0275 Screw 14 3.08 48 PPS-273A132001 Bushing 2 0.4 49 PPS-363B413H08-SF Washer 36 3.6 50 PPS-363B414H08-SF Washer 24 2.64 UDIN00163075AM27

115 51 PPS-201T259001 Bushing 3 1.5 52 PPS-254A6640P0001 Pin 5 4.82 53 PPS-460B498022 Standard 16 8.055808 54 PPS-363B413H09-SF Washer 34 3.978 55 PPS-U614X000P0210 NUT 44 36.08 56 PPS-U614X000P0214 NUT 48 81.6 57 PPS-460B498020 stud 57 21.66 58 PPS-U606P216L1150 stud 26 88.92 59 PPS-03-408-559-038 NUT 2 1.44 60 PPS-790D056002 Bolt 1 1.25 61 PPS-U606P222L2662 stud 4 144.8 62 PPS-U614X000P0112 NUT 2 3 63 PPS-U606P218L1462 stud 8 57.6 64 PPS-U614X000P0112 NUT 12 18 65 PPS-U606P112L1287 stud 2 4.24 66 PPS-U606P112L1687 stud 2 5.56 67 PPS-U606P112L1675 stud 2 5.28 68 PPS-6041J31009-SF NUT 1 0.68 UDIN00163075AM27

18L1462 stud 8 57.6 64 PPS-U614X000P0112 NUT 12 18 65 PPS-U606P112L1287 stud 2 4.24 66 PPS-U606P112L1687 stud 2 5.56 67 PPS-U606P112L1675 stud 2 5.28 68 PPS-6041J31009-SF NUT 1 0.68 UDIN00163075AM27

116 69 PPS-U606P216L1000 stud 9 26.865 70 PPS-363B414H09-SF Washer 34 4.76 71 PPS-363B414H10-SF Washer 30 7.5 72 PPS-264A3950P0001 Bolt 13 0.637 73 PPS-U623P212L0550 bolt 4 6.48 74 PPS-U624P212L0650 Screw 1 0.8 75 PPS-U613X000P0204-SF NUT 32 1.28 76 PPS-363B413H11-SF Washer 9 1.701 77 PPS-U624P112L0450 Screw 23 32.2 78 PPS-627C680031 NUT 13 29.38 79 PPS-363B413H11-SF Washer 15 2.7 80 PPS-MSF3-A160D2055 Screw 6 1.2 81 PPS-MSF3-A160D2055 Screw 4 0.8 82 PPS-F600A075016-SF Screw 25 4 TOTAL 1863 2556.51

Finished Weight SI.No. Description of export item at SI.No.2 Sub Category Quantity (In Nos.) UDIN00163075AM27

117 (In Kgs) Turbine Components Fastners (Made of Alloy Steel Round Bar) 1 PPS-181A7376P0004-SF Washer 12 2.94 2 PPS-199A5923P0101-SF Bushing 1 17.1 3 PPS-199A5923P0101-SF Bushing 1 16.99 4 PPS-363B412H21-SF Washer 8 8.32 5 PPS-363B413H14-SF Washer 27 10.26 6 PPS-363B413H17-SF Washer 12 9.6 7 PPS-264A1059P0101-SF Bushing 1 0.967 8 PPS-788D283104-SF Bushing 1 3.92 9 PPS-0128V755P0001-SF Ring 2 0.64 10 PPS-234A6847P0101-SF Ring 14 29.68 11 PPS-0127V459P0001-SF Valve 1 2.875 12 PPS-128V755P0001-SF Ring 2 0.648 13 PPS-234A6847P0101-SF Ring 12 25.44 14 PPS-128V755P0001-SF Valve 3 0.96 15 PPS-363B413H23-SF Washer 7 17.36 16 PPS-196B4868P0101-SF Bushing 2 25.8 UDIN00163075AM27

PPS-128V755P0001-SF Ring 2 0.648 13 PPS-234A6847P0101-SF Ring 12 25.44 14 PPS-128V755P0001-SF Valve 3 0.96 15 PPS-363B413H23-SF Washer 7 17.36 16 PPS-196B4868P0101-SF Bushing 2 25.8 UDIN00163075AM27

118 17 PPS-363B414H13-SF Washer 65 19.5 18 PPS-363B413H15-SF Washer 48 21.696 19 PPS-363B414H12-SF Washer 18 4.5 20 PPS-363B413H12-SF Washer 14 3.22 21 PPS-363B413H19-SF Washer 21 26.397 22 PPS-363B414H19-SF Washer 12 19.368 23 PPS-199A1753P0002-SF Valve 5 18.2 24 PPS-181A7376P0004 Washer 13 3.25 25 PPS-363B412H15-SF Washer 64 22.528 26 PPS-164A9761P0001-SF Bushing 1 3.05 27 PPS-31-42402-12-SF Washer 22 2.86 28 PPS-31-16598-14-SF Washer 10 1.54 29 PPS-363B412H19-SF Washer 8 6.464 30 PPS-271A8245P0001-SF Bushing 3 15.9 31 PPS-363B414H17-SF Washer 15 14.4 32 PPS-199A5923P0101-SF Bushing 2 33.96 33 PPS-196B4867P0101-SF Bushing 3 39 34 PPS-6037J65115-SF Bushing 2 10 UDIN00163075AM27

119 35 PPS-U624P210L0900 screw 5 7 36 PPS-6041J31008-SF NUT 1 0.8 37 PPS-363B412H21-SF Washer 3 3.12 38 PPS-101A668BA-1-SF NUT 7 4.9 TOTAL 448 455.153

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No1 and its quantity may be allowed as 5044.23 Kgs as 1.97 Kgs./Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.

tained / utilized in the export item at SI.No1 and its quantity may be allowed as 5044.23 Kgs as 1.97 Kgs./Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.

Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 1242.41 Kgs as 2.72 Kgs./Kg content in the export item at SI.No.2 after taking 20% recovery from the scrap.

Case No. 97 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name GRINDLAYS ENGINE PARTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005876AM26 RA File Number 05AX04004238 AM25 Licence No and Date 0511031295/11/03/2025 The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of consultant (SKB) dated 22.04.2026, as under: SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED WASTAGE TO BE ALLOWED 1 PISTON RINGS, DIA UP TO 100 13800 KGS RAIL WIRE NIL ON THE NET UDIN00163075AM27

ed 22.04.2026, as under: SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED WASTAGE TO BE ALLOWED 1 PISTON RINGS, DIA UP TO 100 13800 KGS RAIL WIRE NIL ON THE NET UDIN00163075AM27

120 THICKNESS UP TO 1.20MM & WIDTH UP TO 5 MM

QTY: 2500.00 KGS WEIGHT OF RAIL WIRE THICKNESS UP TO 1.20MM & WIDTH UP TO 5 MM MM WITH DIFF. SETS OF RINGS AND STANDARD TO 060 OVERSIZE, IMP INPUTS TO BE USED 1. QNTY 2500.00 KG RAIL WIRE WITH THICKNESS UP TO 1.20 MM& WIDTH UP TO 5 MM, 2. QNTY 2100 KG SPACER WIRE WITH THICKNESS UP TO 1.50 MM & WIDTH UP TO 5MM SPACER WIRE THICKNESS UP TO 1.50 MM & WIDTH UP TO 5 MM

QTY: 2100.00 KGS NIL ON THE NET WEIGHT OF SPACER WIRE THICKNESS UP TO 1.50 MM & WIDTH UP TO 5 MM NOTE: THE DIAMETER OF THE IMPORTED WIRES SHOULD MATCH THE DIAMETER OF THE WIRE OF THE EXPORT PRODUCT.

Case No. 98 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006662AM25 RA File Number 05AX04004179 AM25 Licence No and Date 0511031314/12/03/2025 comments of DPIIT dated 30.03.2026, as under: Net weight of export item may be specified as 19,965 MT.

Import items at Sl.No.1 to 3 shall be of relevant grade and diameter as contained/utilized in the export item and their quantities may be allowed as 1.02 Kgs/Kg content in the export item. 2. Import item at Sl.No.4 may be allowed on net to net basis with accountability clause. 3.

Case No. 99 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred UDIN00163075AM27

in the export item. 2. Import item at Sl.No.4 may be allowed on net to net basis with accountability clause. 3.

Case No. 99 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred UDIN00163075AM27

121 Party Name SUMIRIKO IMPERIAL HYDRAULICS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006697AM25 RA File Number 05AX04004296 AM25 Licence No and Date 0511031378/17/03/2025

SUBMIT COLOURED DRAWING OF THE EXPORT PRODUCT.
IN APPENDIX 4E, THE INDIGENOUS INPUTS ARE NOT INDICATED. HOW THE EXPORT PRODUCT WILL BE MANUFACTURED BY USING ONLY IMPORTED BRASS - COATED HOSE REINFORCEMENT WIRE?
DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION.
IS THE IMPORTED WIRE OF NON-ALLOY/ALLOY/STAINLESS STEEL? PLEASE INDICATE.

Case No. 100 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name ISGEC HEAVY ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006932AM25 RA File Number 05AX04004438 AM25 Licence No and Date 0511031642/28/03/2025 comments of DPIIT dated 30.03.2026, as under: Quantity of export item i.e One set shall consist of 6 units. 1. Net weight of export item (1 set consisting of 6 units) may be specified as 314.05 MT.
2. Import items at Sl.No.1 to 36 may be allowed on net to net basis with accountability clause. 3.

Case No. 101 / NC/1/MEET/Apr/202627/1 UDIN00163075AM27

its) may be specified as 314.05 MT.
2. Import items at Sl.No.1 to 36 may be allowed on net to net basis with accountability clause. 3.

Case No. 101 / NC/1/MEET/Apr/202627/1 UDIN00163075AM27

122 Case Status Case Approved Party Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006943AM25 RA File Number 31AX04000488 AM25 Licence No and Date 3111004611/28/03/2025 comments of Tech-3 dated 23.04.2026, as under: EP- 26,27 & 34 - Deleted as description of EP & corresponding import item is same. Import – 1 to 30 & 33 to 38- Net wt. Of component made out of relevant imported RM + 10 % wastage 35,36 & 43 - Deleted as EP and import item is same Grade & thickness of import items will be same as used in EP

Case No. 102 / NC/1/MEET/Apr/202627/1 Case Status Case Deferred Party Name VINAYAKA INDUSTRIAL ENTERPRISES, Meeting Number and Date HQ File Number HQRNORM APPLY 00000071AM26 RA File Number 07AX04002041 AM25 Licence No and Date 0711014077/02/04/2025 SUBMIT A COLOURED PHOTOGRAPH OF THE EXPORT PRODUCT AND ALSO OF THE IMPORTED INPUTS. a. WHAT IS THE USE OF THE EXPORT PRODUCT? b. WHAT IS THE REASON FOR ASKING FOR THE SAME INPUT AT THREE PLACES IN THE SUMMARY OF THE APPLICATION ON THE BO PORTAL AS WELL AS IN APPENDIX 4E FOR THE EXPORT PRODUCT? c. WHAT IS THE OPERATION ON IMPORTED INPUT WHICH ATTRACTS 0.5% WASTAGE ON NET CONTENT BASIS? d. UDIN00163075AM27

HE APPLICATION ON THE BO PORTAL AS WELL AS IN APPENDIX 4E FOR THE EXPORT PRODUCT? c. WHAT IS THE OPERATION ON IMPORTED INPUT WHICH ATTRACTS 0.5% WASTAGE ON NET CONTENT BASIS? d. UDIN00163075AM27

123 IS ANY INDIGENOUS INPUT REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT? SUBMIT DETAIL, IF ANY. e. SUBMIT POINT-WISE DETAIL OF MANUFACTURING AND ALSO THE FULL FORM OF THE ABBREVIATIONS USED IN EXPORT AND IMPORT ITEMS. f.

Case No. 103 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name EPE PROCESS FILTERS AND ACCUMULATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000083AM26 RA File Number 09AX04001226 AM25 Licence No and Date 0911009360/03/04/2025 comments of Tech-3 dated 22.04.2026, as under: Import 1. Net wt. Of housing in EP1 +4% wastage 2. Net wt. Of housing in EP2 +4% wastage 3. Net wt. Of housing in EP3 +4% wastage 4. Net wt. Of housing in EP4 +4% wastage 5. Net wt. Of housing in EP5 +4% wastage Pipe to be imported will be of same type & material as used in EP

Case No. 104 / NC/1/MEET/Apr/202627/1 Case Status Case Approved Party Name FIUNEX CONSULTANTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000178AM26 UDIN00163075AM27

124 RA File Number 31AX04000005 AM26 Licence No and Date 3111004648/09/04/2025 comments of DPIIT dated 21.04.2026, as under: For Export item at Sl.No. 1 Quantity of import items at Sl.No. 1 may be allowed as 1.02 fts./ft. Content in the export item. 1. Quantity of import item at Sl.No. 2 may be allowed on net to net basis. 2. Quantity of import item at Sl.No.3 may be allowed on net to net basis with accountability clause . 3.

For Export item at Sl.No. 2 Quantity of import items at Sl.No.4 & 5 may be allowed on net to net basis with accountability clause. 1. For Export item at Sl.No. 3 Quantity of import items at Sl.No.6 may be allowed as 1.02 fts./ft. Content in the export item. 1. Quantity of import items at Sl.No. 7 to 11 may be allowed on net to net basis with accountability clause .
2. For Export item at Sl.No. 4 Quantity of import item at Sl.No. 12 may be allowed as 1.02 fts./ft. Content in the export item. 1. Quantity of import items at Sl.No.13 to 17 may be allowed on net to net basis with accountability clause 2.

For Export item at Sl.No. 5 Quantity of import item at Sl.No. 18 may be allowed on net to net basis with accountability clause. 1. Quantity of import item at Sl.No. 19 may be allowed as 1.02 fts./ft. Content in the export item.
2. For Export item at Sl.No. 6 Quantity of import item at Sl.No.

h accountability clause. 1. Quantity of import item at Sl.No. 19 may be allowed as 1.02 fts./ft. Content in the export item.
2. For Export item at Sl.No. 6 Quantity of import item at Sl.No. 20 may be allowed on net to net basis with accountability 1. UDIN00163075AM27

125 clause. Quantity of import item at Sl.No. 21 may be allowed as1.02 fts./ft. Content in the export item. 2. For Export item at Sl.No. 7 Quantity of import item at Sl.No. 22 may be allowed on net to net basis with accountability clause . . 1. Quantity of import item at Sl.No. 23 may be allowed as1.02 fts./ft. Content in the export item. 2. For Export item at Sl.No. 8 Quantity of import item at Sl.No. 24 may be allowed on net to net basis. 1. Quantity of import item at Sl.No. 25 may be allowed as 1.02 fts./ft. Content in the export item. 2. For Export item at Sl.No. 9 Quantity of import item at Sl.No. 26 may be allowed on net to net basis with accountability clause . . 1. Quantity of import item at Sl.No. 27 may be allowed as 1.02 fts./ft. Content in the export item. 2. For Export item at Sl.No. 10 Quantity of import item at Sl.No. 28 may be allowed on net to net basis with accountability clause . . 1. Quantity of import item at Sl.No. 29 may be allowed as 1.02 fts./ft. Content in the export item. 2.

UDIN00163075AM27

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 28016 --apply.