176 Classification of Medical Device Pertaining to Rehabilitation under the Provisions of Medical Devcies Rules 2017 2022-Aug-04 852 KB

Appendix-A File No. 29/Misc./03/2020-DC (160) Drugs Controller General (India) DirectorateGeneralofHealthServices FDABhawan,KotlaRoad,New Delhi Notice ClassificationofMedicalDevicesPertainingto Rehabilitation

Page 1 of 9

S.No Name of the Medical Device Intended use Classification India as per First Schedule part- 1 MDR 2017 1 Acupressure calf band Intended to wear around the calf to apply pressure to an acupressure point to relieve low back pain, including sciatica and piriformis syndrome. A Non powered belt like device. ClassA 2 Arthritis TENS system Intended to be used as adjunctive therapy in reducing the level of pain and stiffness associated with rheumatoid arthritis or osteoarthritis by electrically stimulating peripheral nerves across the skin (transcutaneous). ClassB 3 Back/leg/chest dynamometer, electronic Powered device intended to assess neuromuscular function by measuring the force or power exerted by the back, chest, and/or leg muscles during flexion. ClassB 4 Back/leg/chest dynamometer, mechanical Non powered device intended to assess neuromuscular function by measuring the force or power exerted by the back, chest, and/or leg muscles during flexion. ClassA 5 Balance-training tongue electrical stimulation system Intended to provide biofeedback for training of balance by sensing body movements and subsequently producing signals which are translated into electrical stimuli applied to the tongue, enabling a patient to correlate electrotactile stimulation with their head and body position during exercise sessions. ClassB 6 Bed/chair electric massager Intended to provide therapeutic massage to the occupant of a bed or chair for the treatment of body aches and pains. ClassB 7 Bicycle ergometer Intended to be used to provide a quantitative measurement of the rate at which work (energy) is performed by a muscle or group of muscles under controlled conditions. ClassA

Page 2 of 9

8 Bladder-emptying vibratory stimulator Intended to initiate urination and facilitate complete bladder emptying through application of small mechanical vibrations to the lower abdomen to promote urethral sphincter relaxation.
ClassB 9 Blue/red/infrared phototherapy lamp Intended to emit blue light, red light, and infrared radiation (heating effect) for phototherapy treatment of mild skin disorders (e.g., mild acne), superficial skin wounds, and musculoskeletal symptoms (e.g., pain, spasm, stiffness). ClassA 10 Circulating-fluid thermal therapy system Intended to be used to pump heated and/or cooled fluid (e.g., water) through externally applied packs for localized hot and/or cold therapy to help treat a variety of adverse conditions resulting from musculoskeletal injury (e.g., pain, swelling, inflammation). ClassB 11 Cold compression therapy cervical spine collar Intended to facilitate, through cooling and compression, the treatment of a variety of conditions resulting from injury/surgery to the neck region (e.g., inflammation, stiffness, whiplash). ClassA 12 Cold/cool therapy gel intended for localized topical skin application to provide a cooling effect for underlying muscles/joints to reduce pain and swelling. ClassA 13 Cold-air therapy unit Intended to reduce localized pain/inflammation, and/or to reduce thermal skin damage by applying cold stream of air during dermatological laser treatments. ClassB 14 Core-body mechanical weight exerciser Intended to enable a patient with a lumbar spine injury to perform controlled extension, contraction, and/or twisting movements of the lumbar/thoracic spine back region and the abdomen, for testing and rehabilitation. ClassA 15 Deep-tissue electromagnetic stimulation system Intended to apply an electromagnetic (EM) field to body tissues to: 1) treat musculoskeletal disorders (e.g., osteoarthritis, osteoporosis); 2) treat body pain (musculoskeletal, postsurgical); and/or 3) help facilitate soft and hard tissue wound/injury healing, with no production of a therapeutic deep heat.
ClassB 16 Electromechanical orthopaedic extracorporeal shock wave therapy system Intended to provide electromechanical orthopaedic extracorporeal shock wave therapy (OEST) to treat musculoskeletal disorders. ClassC

Page 3 of 9

17 Electronic goniometer/kinesiol ogy sensor Intended to evaluate a patient’s range of motion/movement of individual joints/limbs/spine; it is used in a clinical setting typically before/after a medical/surgical intervention, or to assess degree of physical fitness. ClassB 18 Exothermic heat therapy pack Intended to be applied to the body surface, sometimes with pressure, to provide heat therapy to reduce muscle spasms and cramps and/or for joint and muscle stiffness and pain. ClassA 19 Foot sensorimotor therapy mechanical neurostimulator Intended to provide non-invasive peripheral neurostimulation to the feet for improving somatosensory integration, typically for reducing motor impairments and balance disturbances in patients with neurological or neurodegenerative disorders (e.g., Parkinson's disease). ClassC 20 Gait analysis system Intended to be used to study walking or running patterns. ClassA 21 Hand dynamometer/pinch meter, electronic Electronic device intended to assess neuromuscular function by measuring the force or power exerted by the muscles of the hand/forearm to squeeze/pinch an object. ClassB 22 Hand dynamometer/pinch meter, mechanical Mechanical device intended to assess neuromuscular function by measuring the force or power exerted by the muscles of the hand/forearm to squeeze/pinch an object. ClassA 23 Hydrotherapy treadmill Powered device intended for use in partially immersed in water, e.g., in a hydrotherapy tank, to provide additional resistance to the treadmill walking exercise without increasing the impact and/or stress on the patient's joints. ClassA 24 Interferential electrical stimulation system Intended to stimulate peripheral nerves through the transcutaneous application of two currents of slightly different frequencies that cross-over/interfere, producing a beating frequency at the treatment point. ClassC 25 Manual goniometer Non powered device intended to be used in a clinical setting to measure the range of motion of the limb of a patient by measuring the angle of movement achieved at the joint. ClassA

Page 4 of 9

26 Medium-wave diathermy treatment system Intended to produce a therapeutic deep heat within specific volumes of the body through the transcutaneous transmission of electromagnetic (EM) energy in the radio- frequency (RF) bands of 0.5 MHz to 1 MHz ClassB 27 Microwave diathermy treatment system Intended to produce a therapeutic heat 1 to 2 cm below the skin within specific volumes of the body through the transcutaneous transmission of high frequency electromagnetic (EM) energy, typically 2,450 megahertz (MHz) [microwave], to promote tissue healing and pain relief. ClassB 28 Musculoskeletal infrared phototherapy unit, Intended to provide a source of infrared (IR) heat for localized treatment of musculoskeletal pain/injury (e.g., muscle pain, sports injury, rheumatism) and to improve blood circulation in the treated areas to facilitate healing. ClassB 29 Musculoskeletal intense therapeutic ultrasound system Intended to produce and deliver intense therapeutic ultrasound (ITU) waves through the skin to create ablative lesions in subcutaneous soft tissues (e.g., muscles, tendons). ClassC 30 Musculoskeletal/ physical therapy laser Intended to provide noninvasive laser therapy [e.g., infrared phototherapy, low- level laser therapy (LLLT)] for localized treatment of musculoskeletal conditions (e.g., muscle pain, sports injury, disorders of the joints and soft/connective tissues), improving blood circulation in the treated areas to facilitate healing, or for non- needle acupuncture. ClassC 31 Parallel bar exerciser,
Intended to assist users in maintaining good walking posture, particularly a person with a disability, a paraplegic, or a patient who has suffered a stroke and is learning to walk. ClassA 32 Physical therapy massager Electrically powered device intended to provide therapeutic massage to a larger area than hand-held massaging devices.
ClassB 33 Physical therapy paraffin wax bath Intended to be filled with liquid paraffin wax for physical therapy. ClassB 34 Physical therapy steam bath Intended to apply hot steam as a physical therapy to a patient. ClassB 35 Pulsed signal therapy system Intended to regenerate damaged cartilage, particularly by stimulating the production of collagen types that are present in healthy cartilage. ClassC

Page 5 of 9

36 Short-wave diathermy treatment system Intended to provide a therapeutic deep heat within specific volumes of the body through the transcutaneous transmission of electromagnetic (EM) energy in the radio- frequency (RF) bands of 13 MHz to 27.12 MHz
ClassC 37 Telemetric diagnostic spirometer It is a Battery powered portable device Intended to measure several or all respiratory-gas volume and flow parameters needed to evaluate basic pulmonary function [e.g., vital capacity (VC), peak expiratory flow (PEF), forced expiratory volume (FEV), and forced expiratory flow (FEF)], and to transmit the pulmonary function data via a communication device to a healthcare professional(s) at a remote server. ClassB 38 Therapeutic nuclear magnetic resonance system Intended to influence cellular metabolism using nuclear magnetic resonance (NMR) for the treatment of degenerate and pathological changes to the movement/support profiles of a patient's body, in particular diseased skeletal joints, bones, and surrounding muscle tissue (e.g., cervical and lumbar spine, shoulders, elbows, hands, hips, knees, feet). ClassC 39 Silicone Prosthetic Ear A silicone prosthetic ear which adheres to the skin using safe, biocompatible glue is a reconstructive option for patients born with microtia and other birth differences such as Treacher Collins or Goldenhar syndrome; as well as those who have suffered traumatic injury or undergone cancer resection surgery. Class A 40 Silicone Prosthetic Nose Silicone prosthetic nose is used to restore normal contour and improve function for patients who have experienced partial or total loss of their nose to traumatic injury, disease or due to surgical removal of the nose (rhinectomy). Class A 41 External asembled lower limb prosthesis An external assembled lower limb prosthesis is a device that is intended for medical purposes and is a preassembled external artificial limb for the lower extremity. Examples of external assembled lower limb prostheses are the following: Class A

Page 6 of 9

Knee/shank/ankle/foot assembly and thigh/knee/shank/ankle/foot assembly. 42 External limb prosthesis socket liner The prosthetic liner acts as an interface that goes between a person's skin and his or her prosthetic. In short, it's a barrier – one that is applied to the skin before the prosthesis to protect the wearer's skin while enhancing comfort and maintaining a more consistent fit. Class A 43 Finger/thumb prosthesis An artificial substitute for a missing finger or thumb. Class A 44 Upper extremity prosthesis including a simultaneously powered elbow and/or shoulder with greater than two simultaneous powered degrees of freedom and controlled by non- implanted electrical components. A upper extremity prosthesis including a simultaneously powered elbow and/or shoulder with greater than two simultaneous powered degrees of freedom and controlled by non-implanted electrical components, is a prescription device intended for medical purposes, and is intended to replace a partially or fully amputated or congenitally absent upper extremity. It uses electronic inputs (other than simple, manually controlled electrical components such as switches) to provide greater than two independent and simultaneously powered degrees of freedom and includes a simultaneously powered elbow and/or shoulder. Prosthetic arm components that are intended to be used as a system with other arm components must include all degrees of freedom of the total upper extremity prosthesis system.
Class B 45 Powered lower extremity exoskeleton A powered lower extremity exoskeleton is a prescription device that is composed of an external, powered, motorized orthosis that is placed over a person's paralyzed or weakened limbs for medical purposes.
Class B 46 TruncalOrthosis A truncalorthosis is a device intended for medical purposes to support or to immobilize fractures, strains, or sprains of the neck or trunk of the body. Examples of Class A

Page 7 of 9

truncalorthoses are the following: Abdominal, cervical, cervical-thoracic, lumbar, lumbo-sacral, rib fracture, sacroiliac, and thoracic orthoses and clavicle splints. 47 Prosthesis External Arm External prosthesis for upper limb distal to shoulder joint. The device is intended to be used by patients with upper limb loss or deficiency. Prosthesis may include limb components, socket, frame, covering and accessories to enable functional use of the device. Class A 48 Congenital hip dislocation abduction splint A congenital hip dislocation abduction splint is a device intended for medical purposes to stabilize the hips of a young child with dislocated hips in an abducted position (away from the midline). Class A 49 Denis Brown splint A Denis Brown splint is a device intended for medical purposes to immobilize the foot. It is used on young children with tibial torsion (excessive rotation of the lower leg) or club foot. Class A 50 Arm sling An arm sling is a device intended for medical purposes to immobilize the arm, by means of a fabric band suspended from around the neck. Class A 51 Crutches Crutches helps to transfer load from the legs to the upper body. This is useful for people who cannot use their legs to fully support the weight of their body, due to temporary or permanent disabilities. Class A 52 Power Knee The Power Knee is a motor-powered microprocessor knee. It provides active assistance while walking on level-ground, climbing and descending ramps or stairs and when standing up. Power Knee enables amputees to maintain and regain mobility and participate in the daily activities. Class B

Page 8 of 9

53 Abdominal Support It holds abdominal muscles together to relieve pain. Increase circulation at your surgical site to promote healing and decrease swelling. Make physical activity more comfortable. Class A 54 Myoelectric forequarter- amputation prosthesis The complete control system is to be used exclusively for external prosthetic fitting of the upper limbs. Class A 55 Stocking, medical support Limb support shaped as a stocking unit that is worn on the upper or lower extremity to support, correct, prevent deformity, or to align body structures for functional improvement. Class A 56 Back Support/Brace A back brace prevents unnecessary movements that further damage the back. This helps align your spine and strengthen your back muscles. Patients back can heal and back pain will decrease. Class A 57 Prosthetic and orthotic accessory A prosthetic and orthotic accessory is a device intended for medical purposes to support, protect, or aid in the use of a cast, orthosis (brace), or prosthesis. Examples of prosthetic and orthotic accessories include the following: A pelvic support band and belt, a cast shoe, a cast bandage, a limb cover, a prosthesis alignment device, a postsurgical pylon, a transverse rotator, and a temporary training splint. Class A 58 External limb orthotic component An external limb orthotic component is a device intended for medical purposes for use in conjunction with an orthosis (brace) to increase the function of the orthosis for a patient's particular needs. Examples of external limb orthotic components include the following: A brace-setting twister and an external brace stirrup. Class A 59 External limb prosthetic component An external limb prosthetic component is a device intended for medical purposes that, when put together with other appropriate components, constitutes a total prosthesis. Class A

Page 9 of 9

Examples of external limb prosthetic components include the following: Ankle, foot, hip, knee, and socket components; mechanical or powered hand, hook, wrist unit, elbow joint, and shoulder joint components; and cable and prosthesis suction valves. 60 Prosthesis, external, arm, component, hand, external powered, myopotential A controller for prosthetic terminal devices that enables grip and mode switching using passive RFID tags. Class A