IN FORCE

Download

Reliability

In force — no superseding record on file.

Document text

COMMISSION IMPLEMENTING REGULATION (EU) 2025/2621 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and the Council as regards the establishment of default values (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) 2023/956 of the European Parliament and of the Council of 10 May 2023 establishing a carbon border adjustment mechanism (1), and in particular Article 7(7) thereof, Whereas: (1) Article 7 of Regulation (EU) 2023/956 requires the use of default values for determining embedded emissions in goods other than electricity and in imported electricity , and for determining indirect embedded emissions . (2) In accordance with Article 7 of Regulation (EU) 2023/956 default values are to be determined on the basis of the methodology set out in Annex IV to that Regulation, which is to be based on the most up-to-date and reliable information. In the event that neither data obtained by the Joint Research Centre nor data collected during the transitional period is considered sufficiently reliable, the default values should be based on the average of the ten exporting countries with the highest emission intensities for which reliable data can be applied for that type of goods. (3) The environmental objective of the carbon border adjustment mechanism (‘the CBAM’) is to prevent carbon leakage.

mission intensities for which reliable data can be applied for that type of goods. (3) The environmental objective of the carbon border adjustment mechanism (‘the CBAM’) is to prevent carbon leakage. This objective would be compromised if importers of goods other than electricity were allowed to apply default values that are lower than the actual emissions embedded in those goods. At the same time, the default values including mark-ups need to be proportionate and necessary to contribute to achieving the CBAM objectives. Therefore, the default values including mark-ups should be determined using a conservative approach that ensures that embedded emissions are not underestimated when applying default values. (4) To ensure the environmental integrity of the CBAM, default values for embedded emissions of goods other than electricity should include a mark-up to account for the deviations of an individual installation with emission levels higher than the relevant average emission intensity of the producer country. Given the difficulties to verify that installation-specific data from third countries is of a sufficiently high quality, a suitable proxy should be applied to estimate the variations of individual installations compared to the average. Therefore, the proposed mark-up is based on existing deviations of Union installations with respect to Union average altogether. (5) To avoid immediate disproportionate impacts on prices of goods, and to give economic operators time to adapt, the mark-up should be gradually phased-in.

with respect to Union average altogether. (5) To avoid immediate disproportionate impacts on prices of goods, and to give economic operators time to adapt, the mark-up should be gradually phased-in. This phase-in, is also necessary as the number of verifiers may increase in the first years following the end of the transition period, in particular in 2026. and hence CBAM declarants should therefore be able to use default values in those first years, and rely on actual emissions subsequently. (6) Specific considerations apply to the fertilisers sector where a lower mark-up should be applied. Official Journal of the European Union EN L series 2025/2621 31.12.2025 ELI: http://data.europa.eu/eli/reg_impl/2025/2621/oj 1/2400 (1) OJ L 130, 16.5.2023, p. 52, ELI: http://data.europa.eu/eli/reg/2023/956/oj.

(7) For indirect embedded emissions, the default value should be calculated based on the average of the emission factor of the country-of-origin electricity grid. Such method of calculation is the most suitable to achieve both the prevention of carbon leakage as well as the preservation of the environmental integrity of the CBAM, given that it reflects to the largest possible degree decarbonisation efforts of third countries’ electricity grids while maintaining a high level of protection against the risk of carbon leakage.

given that it reflects to the largest possible degree decarbonisation efforts of third countries’ electricity grids while maintaining a high level of protection against the risk of carbon leakage. In order to reflect the impact of decarbonisation policies of third countries, such as the increase in renewable energy production, as well as climatic conditions on the yearly electricity supply in the countries concerned, whilst avoiding an excessive volatility of the emission factor due to anomalous years, including attributable to exceptional climatic conditions or other unforeseeable events, the emission factor should be calculated on the basis of the simple average of the emission factor for the most recent five-year period before the reporting for which reliable data is available. (8) For electricity imported into the customs territory of the Union, in order to reflect the impact of decarbonisation policies in the third country or group of third countries, on the emission intensity of the electricity production in the countries concerned, whilst avoiding an excessive volatility of the emission factor due to anomalous years, including attributable to exceptional climatic conditions or other unforeseeable events, the CO2 emission factor should be calculated on the basis of the average of the yearly CO2 emission factors for the most recent five-years period for which reliable data is available. (9) To provide certainty on the default values to be used for precursors for which the country of production is not known, such default values should be laid down.

which reliable data is available. (9) To provide certainty on the default values to be used for precursors for which the country of production is not known, such default values should be laid down. To prevent operators that use a precursor produced in a third country for which a high default has been set from claiming that the country of production of a precursor is unknown in order to avoid being subject to that high default value, where the country of production of a precursor cannot be identified, the default value to be used for that precursor should be the default value of the third country with the highest emission intensities for that precursor. (10) Where the Commission proceeds to revise this Implementing Act, it should conduct a public consultation to uphold transparency and to ensure a meaningful participation of all relevant stakeholders, in accordance with the Commission’s Better Regulation Guidelines. (11) The default values and mark-ups shall be revised by December 2027 at the latest. The Commission should make all necessary efforts, in close collaboration with the Member States and based on a systematic and holistic review, to ensure that a revision of the default values can already be carried out in 2026. (12) The measures provided for in this Regulation are in accordance with the opinion of the CBAM Committee, HAS ADOPTED THIS REGULATION: Article 1 Default values 1.

an already be carried out in 2026. (12) The measures provided for in this Regulation are in accordance with the opinion of the CBAM Committee, HAS ADOPTED THIS REGULATION: Article 1 Default values 1. Where the embedded emissions in imported goods are determined on the basis of default values in accordance with Article 7(2), point (b), of Regulation (EU) 2023/956, the default values laid down in Annex I to this Regulation shall be used. 2. Where the embedded emissions of complex goods are determined on the basis of actual values, and the embedded emissions of precursors used in the production of those complex goods are determined on the basis of default values in accordance with Article 15 of Commission Implementing Regulation (EU) 2025/2547 (2), the default values laid down in Annex I shall be used for those precursors. EN OJ L, 31.12.2025 2/2400 (2) Commission Implementing Regulation (EU) 2025/2547 of 10 December 2025 laying down the rules for the application of Regulation (EU) 2023/956 of the European Parliament and the Council on the methods for the calculation of emissions embedded in goods (OJ L, 2025/2547, 22.12.2025, ELI:. http://data.europa.eu/eli/reg_impl/2025/2547/oj).

56 of the European Parliament and the Council on the methods for the calculation of emissions embedded in goods (OJ L, 2025/2547, 22.12.2025, ELI:. http://data.europa.eu/eli/reg_impl/2025/2547/oj).

Where the specific indirect embedded emissions are determined on the basis of default values in accordance with Article 7(4) of Regulation (EU) 2023/956, the default values laid down in Annex II to this Regulation shall be used. 4. Where the embedded direct emissions in electricity imported into the customs territory of the Union are determined on the basis of default values in accordance with Article 7(3) of Regulation (EU) 2023/956, the default values laid down in Annex III to this Regulation shall be used. 5. By way of derogation from paragraph 2, where a country of production cannot be identified for a precursor, the default values laid down in Annex IV shall be used. Article 2 This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2026. It shall be revised in 2027 at the latest. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 16 December 2025. For the Commission The President Ursula VON DER LEYEN OJ L, 31.12.2025 EN 3/2400

shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 16 December 2025. For the Commission The President Ursula VON DER LEYEN OJ L, 31.12.2025 EN 3/2400

ANNEX I Default values for goods imported into the customs territory of the Union, except for electricity Where a country or territory is not explicitly listed, the default value for the respective good from the table ‘Other countries and territories’ needs to be selected. Where a country or territory is explicitly listed but no value is provided or the relevant field shows ‘–’, the default value for the respective good from the table ‘Other countries and territories’ needs to be selected. Where default values are used to determine the specific embedded emissions of a final good or of a precursor, the specific embedded free allocation shall be based on the corresponding underlying production route determining the CBAM benchmark (BM) as defined in Commission Implementing Regulation (EU) 2025/2620 (1) on the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered.

the CBAM benchmark (BM) as defined in Commission Implementing Regulation (EU) 2025/2620 (1) on the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered. The meaning of the indicators is as follows: (A) grey clinker / cement (B) white clinker / cement (C) Carbon Steel based on BF/BOF (D) Carbon Steel based on DRI/EAF (E) Carbon Steel based on Scrap/EAF (F) Low alloy Steel based on BF/BOF (G) Low alloy Steel based on DRI/EAF (H) Low alloy Steel based on scrap/EAF (J) High alloy Steel (based on EAF) (K) primary Aluminium (L) secondary Aluminium If no production route is indicated for a CN code, the CBAM benchmark (BM) is independent of the production route. EN OJ L, 31.12.2025 4/2400 (1) Commission Implementing Regulation (EU) 2025/2620 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered (OJ L, 2025/2620, 22.12.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj).

s regards the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered (OJ L, 2025/2620, 22.12.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj).

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – – – – 2523 10 00 White clinker – – – – – – 2523 10 00 Grey clinker 0,870 0 0,870 0,957 1,044 1,131 (A) 2523 21 00 White Portland cement – – – 1,230 0,140 1,370 2523 29 00 Grey Portland cement 0,900 0,030 0,930 1,023 1,116 1,209 2523 90 00 White hydraulic cements – – – – – – (B) 2523 90 00 Grey hydraulic cements 0,860 0,030 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – – – – Fertilisers 1% mark-up 1% mark-up 1% mark-up 2808 00 00 Nitric acid; sulphonitric acids 2,730 0,040 2,760 2,788 2,788 2,788 2814 10 00 Anhydrous ammonia – – – – – – 2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687 2834 21 00 Nitrate of potassium 2,190 0,050 2,240 2,262 2,262 2,262 3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below OJ L, 31.12.2025 EN 5/2400

0 Nitrate of potassium 2,190 0,050 2,240 2,262 2,262 2,262 3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below OJ L, 31.12.2025 EN 5/2400

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,030 0,470 0,475 0,475 0,475 3102 10 15 product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768 3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,330 0,080 1,420 1,434 1,434 1,434 3102 10 90 solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,300 0,080 1,390 1,404 1,404 1,404 EN OJ L, 31.12.2025 6/2400

the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,300 0,080 1,390 1,404 1,404 1,404 EN OJ L, 31.12.2025 6/2400

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,060 0,670 0,677 0,677 0,677 3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,380 0,070 1,460 1,475 1,475 1,475 3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,650 0,050 1,700 1,717 1,717 1,717 3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or gross weight of <= 10 kg) 2,540 0,080 2,620 2,646 2,646 2,646 3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in 10 kg) 2,150 0,080 2,220 2,242 2,242 2,242 OJ L, 31.12.2025 EN 7/2400

g substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in 10 kg) 2,150 0,080 2,220 2,242 2,242 2,242 OJ L, 31.12.2025 EN 7/2400

200 2,222 2,222 2,222 3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages 1,560 0,070 1,620 1,636 1,636 1,636 EN OJ L, 31.12.2025 8/2400

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,570 0,080 1,640 1,656 1,656 1,656 3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below 3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets with a gross weight of <= 10 kg 0,800 0,060 0,860 0,869 0,869 0,869 3105 20 10 containing phosphorus and potassium, with a nitrogen content

10 % by weight on the dry anhydrous product (excl. those in 10 kg) 1,050 0,080 1,120 1,131 1,131 1,131 OJ L, 31.12.2025 EN 9/2400

containing phosphorus and potassium, with a nitrogen content

10 % by weight on the dry anhydrous product (excl. those in 10 kg) 1,050 0,080 1,120 1,131 1,131 1,131 OJ L, 31.12.2025 EN 9/2400

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3105 20 90 containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those 10 kg) 0,710 0,060 0,770 0,778 0,778 0,778 3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in 10 kg) 0,500 0,050 0,550 0,556 0,556 0,556 3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate 10 kg) 0,320 0,040 0,350 0,354 0,354 0,354 3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,090 1,540 1,555 1,555 1,555 EN OJ L, 31.12.2025 10/2400

Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,090 1,540 1,555 1,555 1,555 EN OJ L, 31.12.2025 10/2400

Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3105 59 00 (excl. nitrates and phosphates) 0,560 0,080 0,640 0,646 0,646 0,646 3105 90 20 elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets 1,430 0,060 1,490 1,505 1,505 1,505 3105 90 80 or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a 0,730 0,040 0,770 0,778 0,778 0,778 Hydrogen 10% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239 OJ L, 31.12.2025 EN 11/2400

r forms or in packages of a 0,730 0,040 0,770 0,778 0,778 0,778 Hydrogen 10% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239 OJ L, 31.12.2025 EN 11/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – – – – 2523 10 00 White clinker 1,290 0,060 1,340 1,474 1,608 1,742 (B) 2523 10 00 Grey clinker 1,240 0,040 1,280 1,408 1,536 1,664 (A) 2523 21 00 1,230 0,140 1,370 1,507 1,644 1,781 2523 29 00 1,230 0,060 1,300 1,430 1,560 1,690 2523 90 00 1,280 0,170 1,440 1,584 1,728 1,872 (B) 2523 90 00 1,170 0,070 1,240 1,364 1,488 1,612 (A) 2523 30 00 Aluminous cement – – – – – – Fertilisers 1% mark-up 1% mark-up 1% mark-up 2808 00 00 2,490 0,040 2,530 2,555 2,555 2,555 2814 10 00 Anhydrous ammonia 1,960 0,120 2,080 2,101 2,101 2,101 2814 20 00 0,590 0,040 0,620 0,626 0,626 0,626 2834 21 00 2 0,060 2,060 2,081 2,081 2,081 3102 nitrogenous see below see below see below see below see below see below EN OJ L, 31.12.2025 12/2400

2814 20 00 0,590 0,040 0,620 0,626 0,626 0,626 2834 21 00 2 0,060 2,060 2,081 2,081 2,081 3102 nitrogenous see below see below see below see below see below see below EN OJ L, 31.12.2025 12/2400

0 1,374 1,374 1,374 3102 30 10 1,510 0,060 1,570 1,586 1,586 1,586 3102 30 90 2,330 0,090 2,420 2,444 2,444 2,444 3102 40 10 10 kg) 1,980 0,090 2,070 2,091 2,091 2,091 EN OJ L, 31.12.2025 14/2400

10 % by weight on the dry 10 kg) 0,970 0,090 1,060 1,071 1,071 1,071 EN OJ L, 31.12.2025 16/2400

e below see below see below see below 3105 10 00 0,730 0,080 0,810 0,818 0,818 0,818 3105 20 10

10 % by weight on the dry 10 kg) 0,970 0,090 1,060 1,071 1,071 1,071 EN OJ L, 31.12.2025 16/2400

0,616 3105 90 20 elements nitrogen and potassium, or one principal fertilising substance 1,310 0,070 1,380 1,394 1,394 1,394 3105 90 80 one main fertilising element, incl. weight, of <= 10% (excl. in tablets or similar forms or in packages of a 0,670 0,050 0,720 0,727 0,727 0,727 Aluminium 10% mark-up 20% mark-up 30% mark-up 7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) EN OJ L, 31.12.2025 18/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7603 Aluminium powders and flakes 0,920 N/A 0,920 1,012 1,104 1,196 (L) 7604 10 10 Bars and rods 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7604 10 90 Profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7604 21 00 Hollow profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7604 29 10 Bars and rods 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7604 29 90 Profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7605 Aluminium wire 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7608 Aluminium tubes and pipes 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7609 00 00

backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7608 Aluminium tubes and pipes 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,160 N/A 1,160 1,276 1,392 1,508 (L) OJ L, 31.12.2025 EN 19/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7610 10 00 Doors, windows and their frames and thresholds for doors 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 Other 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 90 Other 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

s), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,600 N/A 1,600 1,760 1,920 2,080 (L) EN OJ L, 31.12.2025 20/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7616 99 10 Cast 0,920 N/A 0,920 1,012 1,104 1,196 (L) 7616 99 90 Other 1,600 N/A 1,600 1,760 1,920 2,080 (L) Hydrogen 10% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066 Iron and steel 10% mark-up 20% mark-up 30% mark-up 2601 12 00 Agglomerated iron ores and concentrates (excl.

ark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066 Iron and steel 10% mark-up 20% mark-up 30% mark-up 2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,180 0,030 0,210 0,231 0,252 0,273 7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,870 N/A 2,870 3,157 3,444 3,731 7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – – 7202 19 weight <= 2% carbon – N/A – – – – OJ L, 31.12.2025 EN 21/2400

s; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,810 N/A 0,810 0,891 0,972 1,053 7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro- alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below EN OJ L, 31.12.2025 22/2400

teel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 3 N/A 3 3,300 3,600 3,900 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, heading 7203) 3 N/A 3 3,300 3,600 3,900 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below 7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free- cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 23/2400

2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7207 11 16 < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7207 11 90 weight < 0,25% carbon, of < twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 12 10 weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring

= twice the thickness, rolled or 3 N/A 3 3,300 3,600 3,900 (C) 7207 12 90 cross-section, the width >= twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 24/2400

ight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 25/2400

= twice the thickness, rolled or 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 26/2400

h < twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 32 weight >= 0,25 of carbon, of

= twice the thickness, rolled or 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 26/2400

,300 3,600 3,900 (C) 7208 Flat-rolled products of iron or non- alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 27/2400

150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 3 N/A 3 3,300 3,600 3,900 (C) 7211 14 00 alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 28/2400

f a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 28/2400

rbon 3 N/A 3 3,300 3,600 3,900 (C) 7211 90 reduced" and further worked, but not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7212 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 29/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3 N/A 3 3,300 3,600 3,900 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below 7214 10 00 forged (excl. in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (C) 7214 20 00 steel, with indentations, ribs, groves or other deformations produced during the rolling process 3 N/A 3 3,300 3,600 3,900 (C) 7214 30 00 Bars and rods, of non-alloy free- cutting steel, not further worked than hot-rolled, hot-drawn or hot- extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 30/2400

ded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 30/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7214 91 steel, not further worked than hot- rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing rolling process, bars and rods twisted after rolling and free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7214 99 steel, only hot-rolled, only hot- drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing rolling process, and of non-alloy free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7215 steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 31/2400

hot-formed and further worked, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 31/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below 7217 10 coils, not plated or coated, whether or not polished (excl. bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 20 coils, plated or coated with zinc (excl. bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 30 coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 90 coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below 7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 32/2400

l, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 32/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,300 N/A 3,300 3,630 3,960 4,290 7218 99 11 steel, of square cross-section, rolled 3,300 N/A 3,300 3,630 3,960 4,290 7218 99 19 steel, of square cross-section, forged 3,300 N/A 3,300 3,630 3,960 4,290 7218 99 20 steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,300 N/A 3,300 3,630 3,960 4,290 7218 99 80 steel, forged (excl. products of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290 7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot- rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below 7219 11 00 steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,300 N/A 3,300 3,630 3,960 4,290 OJ L, 31.12.2025 EN 33/2400

e below see below 7219 11 00 steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,300 N/A 3,300 3,630 3,960 4,290 OJ L, 31.12.2025 EN 33/2400

t in coils, of a thickness of > 10 mm 3,300 N/A 3,300 3,630 3,960 4,290 7219 22 in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 34/2400

3,960 4,290 7219 32 3 mm but < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290 7219 33 "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,300 N/A 3,300 3,630 3,960 4,290 OJ L, 31.12.2025 EN 35/2400

ot further worked than hot-rolled, of a thickness of >= 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290 7220 12 00 thickness of < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 36/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7220 20 "cold-reduced" 3,300 N/A 3,300 3,630 3,960 4,290 7220 90 and further worked 3,300 N/A 3,300 3,630 3,960 4,290 7221 Bars and rods of stainless steel, hot- rolled, in irregularly wound coils 3,300 N/A 3,300 3,630 3,960 4,290 7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below 7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross- section 3,300 N/A 3,300 3,630 3,960 4,290 7222 19 extruded (excl. of circular cross- section) 3,300 N/A 3,300 3,630 3,960 4,290 7222 20 steel, not further worked than cold- formed or cold-finished 3,300 N/A 3,300 3,630 3,960 4,290 OJ L, 31.12.2025 EN 37/2400

. of circular cross- section) 3,300 N/A 3,300 3,630 3,960 4,290 7222 20 steel, not further worked than cold- formed or cold-finished 3,300 N/A 3,300 3,630 3,960 4,290 OJ L, 31.12.2025 EN 37/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7222 30 steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,300 N/A 3,300 3,630 3,960 4,290 7222 40 Angles, shapes and sections of 3,300 N/A 3,300 3,630 3,960 4,290 7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below 7223 00 bars and rods) 3,300 N/A 3,300 3,630 3,960 4,290 7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and see below see below see below see below see below see below 7224 10 ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 02 Semi-finished products of tool steel 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 38/2400

products obtained by continuous casting) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 02 Semi-finished products of tool steel 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 38/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7224 90 03 Semi-finished products of high- speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot- casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 39/2400

asting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 39/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7224 90 14 casting, the width measuring >= steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 18 or rectangular cross-section, forged (excl. of tool steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 31 containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot- casting 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 40/2400

teel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 40/2400

= 600 mm, hot-rolled or cold- rolled "cold-reduced" see below see below see below see below see below see below 7225 11 00 Flat-rolled products of silicon- electrical steel, of a width of >= 600 mm, grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (C) 7225 19 10 600 mm, hot-rolled 3,410 N/A 3,410 3,751 4,092 4,433 (C) 7225 19 90 reduced", non-grain-oriented 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 30 = 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 41/2400

751 4,092 4,433 (F) 7225 30

= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 41/2400

= 600 mm, not further worked than hot-rolled, not in coils (excl. 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 50 = 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 91 00 = 600 mm, hot-rolled or cold- rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon- electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 92 00 = 600 mm, hot-rolled or cold- rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 42/2400

600 mm, hot-rolled or cold- rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and 3,410 N/A 3,410 3,751 4,092 4,433 (F) EN OJ L, 31.12.2025 42/2400

= 600 mm, hot-rolled or cold- rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon- electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below 7226 11 00 electrical steel, of a width of < "cold-reduced", grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (C) 7226 19 10 600 mm, not further worked than hot-rolled 3,410 N/A 3,410 3,751 4,092 4,433 (C) 7226 19 80 reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 43/2400

0 3,751 4,092 4,433 (C) 7226 19 80 reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 43/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot- 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 91 hot-rolled (excl. products of high- speed steel or silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 92 00 cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 99 "cold-reduced" and further worked (excl. products of high-speed steel or 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) EN OJ L, 31.12.2025 44/2400

3,410 3,751 4,092 4,433 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) EN OJ L, 31.12.2025 44/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below 7228 10 20 Bars and rods of high-speed steel, hot-drawn or extruded, and hot- rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 10 50 forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 10 90 not further worked than cold- formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 45/2400

nished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) OJ L, 31.12.2025 EN 45/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 30 than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high- speed steel or silico-manganese steel, semi-finished products, flat- rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7228 40 than forged (excl. products of high- 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 50 than cold-formed or cold-finished silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) EN OJ L, 31.12.2025 46/2400

ico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) EN OJ L, 31.12.2025 46/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7228 60 than stainless, cold-formed or cold- finished and further worked or hot- formed and further worked, n.e.s. 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 47/2400

f iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 47/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,190 N/A 3,190 3,509 3,828 4,147 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below 7303 00 cast iron 2,870 N/A 2,870 3,157 3,444 3,731 7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below 7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290 7304 19 gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 48/2400

3,300 N/A 3,300 3,630 3,960 4,290 7304 19 gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 48/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,300 N/A 3,300 3,630 3,960 4,290 7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290 7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7304 31 seamless, of circular cross-section, of iron or non-alloy steel, cold- drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 49/2400

st iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 49/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7304 39 of iron or non-alloy steel, not cold- (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) 7304 41 00 of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipelines, casing and tubing of a 3,300 N/A 3,300 3,630 3,960 4,290 7304 49 of stainless steel, not cold-drawn or pipelines or of a kind used for 3,300 N/A 3,300 3,630 3,960 4,290 7304 51 of alloy steel other than stainless, cold-drawn or cold-rolled "cold- reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,910 N/A 2,910 3,201 3,492 3,783 (F) EN OJ L, 31.12.2025 50/2400

ld- reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,910 N/A 2,910 3,201 3,492 3,783 (F) EN OJ L, 31.12.2025 50/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7304 59 not cold-drawn or cold-rolled "cold- drilling for oil) 2,910 N/A 2,910 3,201 3,492 3,783 (C)/(F) 7304 90 00 seamless, of non-circular cross- section, of iron or steel (excl. 3 N/A 3 3,300 3,600 3,900 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat- rolled products of iron or steel "e.g., welded, riveted or similarly closed" 3 N/A 3 3,300 3,600 3,900 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below OJ L, 31.12.2025 EN 51/2400

es and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below OJ L, 31.12.2025 EN 51/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7306 11 00 gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290 7306 19 00 products of iron or steel, of an (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290 7306 29 00 flat-rolled products of iron or steel, 406,4 mm (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 52/2400

C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 52/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7306 30 18 steel (excl. cold-drawn or cold- rolled) 3 N/A 3 3,300 3,600 3,900 7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross- section, of iron or non-alloy steel, plated or coated with zinc 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 49 section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross- section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 53/2400

ated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 53/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7306 30 77 section, of iron or non-alloy steel of 168,3 mm (excl. plated or coated with zinc and line pipe of a kind and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 80 welded, having a circular cross- section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 40 20 welded, of circular cross-section, of stainless steel, cold-drawn or cold- rolled "cold-reduced" (excl. products having internal and external circular diameter of > 406,4 mm, and line kind used in drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 54/2400

uced" (excl. products having internal and external circular diameter of > 406,4 mm, and line kind used in drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 54/2400

406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in 3,300 N/A 3,300 3,630 3,960 4,290 7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 50 29 other than stainless (excl. cold- drawn or cold-rolled) 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 50 80 alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind drilling for oil or gas, and precision steel tubes) 2,930 N/A 2,930 3,223 3,516 3,809 (F) OJ L, 31.12.2025 EN 55/2400

s-sections and an external diameter of > 406,4 mm, and line pipe of a kind drilling for oil or gas, and precision steel tubes) 2,930 N/A 2,930 3,223 3,516 3,809 (F) OJ L, 31.12.2025 EN 55/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290 7306 61 92 cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 61 99 thickness of > 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 69 10 welded, of non-circular cross- section, of stainless steel (excl. tubes and pipes having internal and 406,4 mm, line pipe of a kind used tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 56/2400

tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290 EN OJ L, 31.12.2025 56/2400

406,4 mm) 3 N/A 3 3,300 3,600 3,900 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below 7307 11 Tube or pipe fittings of non- malleable cast iron 2,860 N/A 2,860 3,146 3,432 3,718 7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,860 N/A 2,860 3,146 3,432 3,718 7307 19 90 Cast tube or pipe fittings of steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 57/2400

e or pipe fittings of cast iron (excl. of non-malleable) 2,860 N/A 2,860 3,146 3,432 3,718 7307 19 90 Cast tube or pipe fittings of steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 57/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7307 21 00 Flanges of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783 7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783 7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783 7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,910 N/A 2,910 3,201 3,492 3,783 7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3 N/A 3 3,300 3,600 3,900 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3 N/A 3 3,300 3,600 3,900 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3 N/A 3 3,300 3,600 3,900 (C) 7307 99 Tube or pipe fittings, of iron or steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 58/2400

,900 (C) 7307 99 Tube or pipe fittings, of iron or steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 58/2400

Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,020 N/A 3,020 3,322 3,624 3,926 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl.

iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3 N/A 3 3,300 3,600 3,900 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat- insulated, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 59/2400

the like, threaded) see below see below see below see below see below see below 7318 11 00 Coach screws of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,300 N/A 3,300 3,630 3,960 4,290 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 3 N/A 3 3,300 3,600 3,900 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 60/2400

er than stainless (excl. spaced- thread screws and wood screws) 3 N/A 3 3,300 3,600 3,900 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self- tapping screws, lag screws, stoppers, plugs and the like, threaded) 3 N/A 3 3,300 3,600 3,900 (C) 7318 16 Nuts of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 3 N/A 3 3,300 3,600 3,900 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 3 N/A 3 3,300 3,600 3,900 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 61/2400

. tubular and bifurcated rivets for particular uses) 3 N/A 3 3,300 3,600 3,900 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 61/2400

es for mills, of iron or steel, forged or stamped, but not further worked 3 N/A 3 3,300 3,600 3,900 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3 N/A 3 3,300 3,600 3,900 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 30 Ladders and steps, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 62/2400

. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 98 Articles of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) Angola Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay 0,220 0,040 0,250 0,275 0,300 0,325 (A) 2523 10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 1,240 0,020 1,260 1,386 1,525 1,677 (A) 2523 21 00 – – – _ _ _ 2523 29 00 1,240 0,030 1,270 1,397 1,537 1,690 OJ L, 31.12.2025 EN 63/2400

Angola Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 2523 90 00 – – – _ _ _ 2523 90 00 1,180 0,040 1,220 1,342 1,476 1,624 (A) 2523 30 00 Aluminous cement – – – _ _ _ Hydrogen 10% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066 Iron and steel 10% mark-up 20% mark-up 30% mark-up 2601 12 00 pyrites) 0,617 N/A 0,617 0,678 0,740 0,802 7202 11 1,690 N/A 1,690 1,859 2,028 2,197 7202 41 2,350 N/A 2,350 2,585 2,820 3,055 7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524 EN OJ L, 31.12.2025 64/2400

A 0,617 0,678 0,740 0,802 7202 11 1,690 N/A 1,690 1,859 2,028 2,197 7202 41 2,350 N/A 2,350 2,585 2,820 3,055 7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524 EN OJ L, 31.12.2025 64/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 0,870 0,030 0,900 0,990 1,089 1,198 (A) 2523 21 00 – – – _ _ _ 2523 29 00 0,870 0,050 0,920 1,012 1,113 1,225 2523 90 00 – – – _ _ _ 2523 90 00 – – – _ _ _ 2523 30 00 Aluminous cement – – – _ _ _ Fertilisers 1% mark-up 1% mark-up 1% mark-up 2808 00 00 1,900 0,030 1,930 1,949 1,949 1,949 2814 10 00 Anhydrous ammonia 2,260 0,100 2,360 2,384 2,384 2,384 2814 20 00 0,680 0,030 0,710 0,717 0,717 0,717 OJ L, 31.12.2025 EN 65/2400

% mark-up 2808 00 00 1,900 0,030 1,930 1,949 1,949 1,949 2814 10 00 Anhydrous ammonia 2,260 0,100 2,360 2,384 2,384 2,384 2814 20 00 0,680 0,030 0,710 0,717 0,717 0,717 OJ L, 31.12.2025 EN 65/2400

,727 0,727 3102 29 00 ammonium nitrate 1,190 0,060 1,250 1,263 1,263 1,263 3102 30 10 1,280 0,050 1,320 1,333 1,333 1,333 3102 30 90 1,970 0,070 2,040 2,060 2,060 2,060 OJ L, 31.12.2025 EN 67/2400

0 packages <= 10 kg) 1,490 0,070 1,560 1,576 1,576 1,576 3105 see below see below see below see below see below see below 3105 10 00 0,700 0,060 0,760 0,768 0,768 0,768 OJ L, 31.12.2025 EN 69/2400

10 % by weight on the dry 10 kg) 0,860 0,060 0,920 0,929 0,929 0,929 3105 20 90 10 kg) 0,580 0,050 0,630 0,636 0,636 0,636 3105 30 00 Diammonium hydrogenorthophosphate 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576 3105 40 00 Ammonium dihydrogenorthophosphate diammonium hydrogenorthophosphate 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374 EN OJ L, 31.12.2025 70/2400

080 1,240 1,252 1,252 1,252 3105 59 00 0,610 0,080 0,690 0,697 0,697 0,697 3105 90 20 1,130 0,050 1,180 1,192 1,192 1,192 3105 90 80 0,580 0,040 0,620 0,626 0,626 0,626 OJ L, 31.12.2025 EN 71/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Aluminium 10% mark-up 20% mark-up 30% mark-up 7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 2,050 N/A 2,050 2,255 2,460 2,665 (K) EN OJ L, 31.12.2025 72/2400

,490 2,739 2,988 3,237 (K) 7608 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 2,050 N/A 2,050 2,255 2,460 2,665 (K) EN OJ L, 31.12.2025 72/2400

st 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen 10% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066 Iron and steel 10% mark-up 20% mark-up 30% mark-up 2601 12 00 pyrites) 0,140 0,050 0,200 0,220 0,240 0,260 7201 2,300 N/A 2,300 2,530 2,760 2,990 7202 11 – N/A – _ _ _ 7202 19 weight <= 2% carbon – N/A – _ _ _ EN OJ L, 31.12.2025 74/2400

_ 7203 forms 1,030 N/A 1,030 1,133 1,236 1,339 7205 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7206 heading 7203) see below see below see below see below see below see below OJ L, 31.12.2025 EN 75/2400

= twice the thickness, rolled or 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 12 90 2,460 N/A 2,460 2,706 2,952 3,198 (C) OJ L, 31.12.2025 EN 77/2400

460 N/A 2,460 2,706 2,952 3,198 (C) 7207 12 10

= twice the thickness, rolled or 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 12 90 2,460 N/A 2,460 2,706 2,952 3,198 (C) OJ L, 31.12.2025 EN 77/2400

= twice the thickness, rolled or 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 79/2400

470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 19 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 20 32

= twice the thickness, rolled or 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 79/2400

150 mm but < 600 mm and a 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7211 14 00 "wide flats") 2,590 N/A 2,590 2,849 3,108 3,367 (C) OJ L, 31.12.2025 EN 81/2400

e below see below see below 7211 13 00

150 mm but < 600 mm and a 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7211 14 00 "wide flats") 2,590 N/A 2,590 2,849 3,108 3,367 (C) OJ L, 31.12.2025 EN 81/2400

below 7214 10 00 coils) 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7214 20 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7214 30 00 rolling) 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 83/2400

2,964 3,211 (C) 7218 see below see below see below see below see below see below 7218 10 00 3,230 N/A 3,230 3,553 3,876 4,199 7218 91 3,430 N/A 3,430 3,773 4,116 4,459 OJ L, 31.12.2025 EN 85/2400

4,75 mm 3,430 N/A 3,430 3,773 4,116 4,459 7219 14 3,430 N/A 3,430 3,773 4,116 4,459 7219 21 3,430 N/A 3,430 3,773 4,116 4,459 7219 22 3,430 N/A 3,430 3,773 4,116 4,459 OJ L, 31.12.2025 EN 87/2400

2 4,224 4,576 7220 see below see below see below see below see below see below 7220 11 00 3,430 N/A 3,430 3,773 4,116 4,459 7220 12 00 3,430 N/A 3,430 3,773 4,116 4,459 OJ L, 31.12.2025 EN 89/2400

w see below 7223 00 bars and rods) 3,230 N/A 3,230 3,553 3,876 4,199 7224 see below see below see below see below see below see below 7224 10 casting) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7224 90 02 3,340 N/A 3,340 3,674 4,008 4,342 (F) OJ L, 31.12.2025 EN 91/2400

008 4,342 (F) 7224 90 18 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7224 90 31 casting 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 38 3,340 N/A 3,340 3,674 4,008 4,342 (F) OJ L, 31.12.2025 EN 93/2400

= 600 mm, hot-rolled or cold- see below see below see below see below see below see below 7225 11 00 4,360 N/A 4,360 4,796 5,232 5,668 (C) 7225 19 10 600 mm, hot-rolled 3,340 N/A 3,340 3,674 4,008 4,342 (C) 7225 19 90 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 30 = 600 mm, not further worked 3,340 N/A 3,340 3,674 4,008 4,342 (F) EN OJ L, 31.12.2025 94/2400

= 600 mm, not further worked 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7225 50 = 600 mm, not further worked steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 91 00 = 600 mm, hot-rolled or cold- electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 92 00 = 600 mm, hot-rolled or cold- 3,430 N/A 3,430 3,773 4,116

A 3,430 3,773 4,116 4,459 (F) 7225 91 00

= 600 mm, hot-rolled or cold- electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 92 00 = 600 mm, hot-rolled or cold- 3,430 N/A 3,430 3,773 4,116 4,459 (F) OJ L, 31.12.2025 EN 95/2400

= 600 mm, hot-rolled or cold- electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7226 "cold-reduced" see below see below see below see below see below see below 7226 11 00 4,360 N/A 4,360 4,796 5,232 5,668 (C) 7226 19 10 hot-rolled 3,340 N/A 3,340 3,674 4,008 4,342 (C) 7226 19 80 3,430 N/A 3,430 3,773 4,116 4,459 (F) EN OJ L, 31.12.2025 96/2400

,340 3,674 4,008 4,342 (F) 7226 92 00 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7226 99 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7227 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) OJ L, 31.12.2025 EN 97/2400

3,454 3,768 4,082 (F) 7228 30 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) 7228 40 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 50 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) OJ L, 31.12.2025 EN 99/2400

7303 00 cast iron 2,350 N/A 2,350 2,585 2,820 3,055 7304 see below see below see below see below see below see below 7304 11 00 steel 3,230 N/A 3,230 3,553 3,876 4,199 OJ L, 31.12.2025 EN 101/2400

70 N/A 2,470 2,717 2,964 3,211 (C) 7304 39 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 41 00 3,230 N/A 3,230 3,553 3,876 4,199 7304 49 3,230 N/A 3,230 3,553 3,876 4,199 OJ L, 31.12.2025 EN 103/2400

ee below 7306 11 00 3,520 N/A 3,520 3,872 4,224 4,576 7306 19 00 cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 21 00 406,4 mm 3,520 N/A 3,520 3,872 4,224 4,576 OJ L, 31.12.2025 EN 105/2400

30 72 oil or gas) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 77 pipe") 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 80 pipe") 2,680 N/A 2,680 2,948 3,216 3,484 (C) OJ L, 31.12.2025 EN 107/2400

406,4 mm, and line pipe of a kind 3,430 N/A 3,430 3,773 4,116 4,459 7306 50 21 2,720 N/A 2,720 2,992 3,264 3,536 (F) 7306 50 29 2,630 N/A 2,630 2,893 3,156 3,419 (F) EN OJ L, 31.12.2025 108/2400

(F) 7306 61 10 3,520 N/A 3,520 3,872 4,224 4,576 7306 61 92 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 61 99 thickness of > 2 mm 2,680 N/A 2,680 2,948 3,216 3,484 (C) OJ L, 31.12.2025 EN 109/2400

406,4 mm) 2,680 N/A 2,680 2,948 3,216 3,484 (C) EN OJ L, 31.12.2025 110/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7307 see below see below see below see below see below see below 7307 11 malleable cast iron 2,340 N/A 2,340 2,574 2,808 3,042 7307 19 10 2,340 N/A 2,340 2,574 2,808 3,042 7307 19 90 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7307 21 00 products) 2,410 N/A 2,410 2,651 2,892 3,133 7307 22 2,410 N/A 2,410 2,651 2,892 3,133 7307 23 2,410 N/A 2,410 2,651 2,892 3,133 7307 29 2,410 N/A 2,410 2,651 2,892 3,133 7307 91 00 stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7307 92 stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C)

,410 2,651 2,892 3,133 7307 29 2,410 N/A 2,410 2,651 2,892 3,133 7307 91 00 stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7307 92 stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 111/2400

below see below see below see below see below see below 7318 11 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 12 10 coach screws) 3,230 N/A 3,230 3,553 3,876 4,199 (C) OJ L, 31.12.2025 EN 113/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7318 12 90 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 13 00 iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 14 10 (excl. wood screws) 3,230 N/A 3,230 3,553 3,876 4,199 (C) 7318 14 91 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 14 99 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 15 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 16 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 19 00 n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 21 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) EN OJ L, 31.12.2025 114/2400

2,964 3,211 (C) 7318 16 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 19 00 n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 21 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) EN OJ L, 31.12.2025 114/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7318 22 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 23 00 uses) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 24 00 steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 29 00 steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 cast articles) see below see below see below see below see below see below 7326 11 00 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 19 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 20 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 30 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 40 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 115/2400

,706 2,952 3,198 (C) 7326 20 00 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 30 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 40 2,470 N/A 2,470 2,717 2,964 3,211 (C) OJ L, 31.12.2025 EN 115/2400

Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7326 90 50 of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 60 of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 92 forged, n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 94 forged, n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 96 n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 98 2,680 N/A 2,680 2,948 3,216 3,484 (C) Armenia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ EN OJ L, 31.12.2025 116/2400

nderlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ EN OJ L, 31.12.2025 116/2400

Armenia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 2523 10 00 Grey clinker 1,360 0,010 1,370 1,507 1,644 1,781 (A) 2523 21 00 – – – _ _ _ 2523 29 00 1,320 0,020 1,350 1,485 1,620 1,755 2523 90 00 – – – _ _ _ 2523 90 00 1,260 0,030 1,280 1,408 1,536 1,664 (A) 2523 30 00 Aluminous cement – – – _ _ _ Fertilisers 1% mark-up 1% mark-up 1% mark-up 2808 00 00 2,750 0,020 2,770 2,798 2,798 2,798 2814 10 00 Anhydrous ammonia – – – _ _ _ 2814 20 00 0,650 0,020 0,660 0,667 0,667 0,667 2834 21 00 2,220 0,020 2,250 2,273 2,273 2,273 3102 nitrogenous see below see below see below see below see below see below 3102 10 12 weight of <= 10 kg) 0,490 0,010 0,500 0,505 0,505 0,505 OJ L, 31.12.2025 EN 117/2400

2,250 2,273 2,273 2,273 3102 nitrogenous see below see below see below see below see below see below 3102 10 12 weight of <= 10 kg) 0,490 0,010 0,500 0,505 0,505 0,505 OJ L, 31.12.2025 EN 117/2400

1,727 1,727 3102 30 90 2,590 0,040 2,620 2,646 2,646 2,646 3102 40 10 10 kg) 2,220 0,040 2,250 2,273 2,273 2,273 3102 40 90 10 kg) 2,220 0,040 2,250 2,273 2,273 2,273 OJ L, 31.12.2025 EN 119/2400

10 % by weight on the dry 10 kg) 1,080 0,040 1,120 1,131 1,131 1,131 3105 20 90 10 kg) 0,740 0,030 0,760 0,768 0,768 0,768 OJ L, 31.12.2025 EN 121/2400

0,030 0,850 0,859 0,859 0,859 3105 20 10

10 % by weight on the dry 10 kg) 1,080 0,040 1,120 1,131 1,131 1,131 3105 20 90 10 kg) 0,740 0,030 0,760 0,768 0,768 0,768 OJ L, 31.12.2025 EN 121/2400

Armenia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3105 90 20 1,460 0,030 1,480 1,495 1,495 1,495 3105 90 80 0,750 0,020 0,770 0,778 0,778 0,778 Australia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route

led 3,610 N/A 3,610 3,971 4,332 4,693 (C) 7225 19 90 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 30

= 600 mm, not further worked 3,610 N/A 3,610 3,971 4,332 4,693 (F) OJ L, 31.12.2025 EN 155/2400

= 600 mm, not further worked 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7225 50 = 600 mm, not further worked steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 91 00 = 600 mm, hot-rolled or cold- electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 92 00 = 600 mm, hot-rolled or cold- 3,650 N/A 3,650 4,015 4,380 4,745 (F) EN OJ L, 31.12.2025 156/2400

= 600 mm, hot-rolled or cold- electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 "cold-reduced" see below see below see below see below see below see below 7226 11 00 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7226 19 10 hot-rolled 3,610 N/A 3,610 3,971 4,332 4,693 (C) 7226 19 80 3,650 N/A 3,650 4,015 4,380 4,745 (F) OJ L, 31.12.2025 EN 157/2400

see below 7226 11 00 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7226 19 10 hot-rolled 3,610 N/A 3,610 3,971 4,332 4,693 (C) 7226 19 80 3,650 N/A 3,650 4,015 4,380 4,745 (F) OJ L, 31.12.2025 EN 157/2400

below 7228 10 20 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 10 50 coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 10 90 coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) OJ L, 31.12.2025 EN 159/2400

F) 7228 80 00 or non-alloy steel 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7229 rods) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7301 or steel 3 N/A 3 3,300 3,600 3,900 (C) OJ L, 31.12.2025 EN 161/2400

24 4,576 7304 19 or of cast iron) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 22 00 steel, of a kind used in drilling for oil or gas 3,520 N/A 3,520 3,872 4,224 4,576 EN OJ L, 31.12.2025 162/2400

3,520 N/A 3,520 3,872 4,224 4,576 7304 51 drilling for oil) 2,830 N/A 2,830 3,113 3,396 3,679 (F) 7304 59 drilling for oil) 2,830 N/A 2,830 3,113 3,396 3,679 (C)/(F) EN OJ L, 31.12.2025 164/2400

A 3 3,300 3,600 3,900 (C) 7306 30 18 rolled) 2,970 N/A 2,970 3,267 3,564 3,861 7306 30 41 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 49 zinc) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 166/2400

406,4 mm, and line pipe of a kind 3,600 N/A 3,600 3,960 4,320 4,680 7306 50 21 2,970 N/A 2,970 3,267 3,564 3,861 (F) 7306 50 29 2,930 N/A 2,930 3,223 3,516 3,809 (F) EN OJ L, 31.12.2025 168/2400

406,4 mm, and line pipe of a kind 3,600 N/A 3,600 3,960 4,320 4,680 7306 50 21 2,970 N/A 2,970 3,267 3,564 3,861 (F) 7306 50 29 2,930 N/A 2,930 3,223 3,516 3,809 (F) EN OJ L, 31.12.2025 168/2400

406,4 mm) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 170/2400

ing CBAM BM 7306 69 10 3,630 N/A 3,630 3,993 4,356 4,719 7306 69 90 cross-section) 3 N/A 3 3,300 3,600 3,900 (C) 7306 90 00

406,4 mm) 3 N/A 3 3,300 3,600 3,900 (C) EN OJ L, 31.12.2025 170/2400

307 29 3 N/A 3 3,300 3,600 3,900 7307 91 00 stainless products) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7307 92 stainless products) 2,920 N/A 2,920 3,212 3,504 3,796 (C) OJ L, 31.12.2025 EN 171/2400

below see below see below see below see below see below 7318 11 00 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 12 10 coach screws) 3,520 N/A 3,520 3,872 4,224 4,576 (C) OJ L, 31.12.2025 EN 173/2400

3,600 3,900 (C) 7318 16 3,090 N/A 3,090 3,399 3,708 4,017 (C) 7318 19 00 n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 21 00 2,920 N/A 2,920 3,212 3,504 3,796 (C) EN OJ L, 31.12.2025 174/2400

Australia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7318 22 00 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 23 00 uses) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 24 00 steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 29 00 steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 cast articles) see below see below see below see below see below see below 7326 11 00 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 19 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 20 00 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 30 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 40 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 50 of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) OJ L, 31.12.2025 EN 175/2400

(C) 7326 90 30 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 40 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 50 of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) OJ L, 31.12.2025 EN 175/2400

Australia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7326 90 60 of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 92 forged, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 94 forged, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 96 n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 98 3 N/A 3 3,300 3,600 3,900 (C) Azerbaijan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 0,870 0,030 0,890 0,979 1,068 1,157 (A) 2523 21 00 – – – _ _ _ 2523 29 00 0,890 0,050 0,940 1,034 1,128 1,222 EN OJ L, 31.12.2025 176/2400

10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 0,870 0,030 0,890 0,979 1,068 1,157 (A) 2523 21 00 – – – _ _ _ 2523 29 00 0,890 0,050 0,940 1,034 1,128 1,222 EN OJ L, 31.12.2025 176/2400

2,210 2,232 2,232 2,232 3102 nitrogenous see below see below see below see below see below see below 3102 10 12 weight of <= 10 kg) 0,490 0,020 0,510 0,515 0,515 0,515 OJ L, 31.12.2025 EN 177/2400

1,697 1,697 3102 30 90 2,520 0,070 2,590 2,616 2,616 2,616 3102 40 10 10 kg) 2,160 0,060 2,220 2,242 2,242 2,242 3102 40 90 10 kg) 2,160 0,060 2,220 2,242 2,242 2,242 OJ L, 31.12.2025 EN 179/2400

10 % by weight on the dry 10 kg) 1,060 0,060 1,120 1,131 1,131 1,131 3105 20 90 10 kg) 0,720 0,050 0,770 0,778 0,778 0,778 OJ L, 31.12.2025 EN 181/2400

0,060 0,860 0,869 0,869 0,869 3105 20 10

10 % by weight on the dry 10 kg) 1,060 0,060 1,120 1,131 1,131 1,131 3105 20 90 10 kg) 0,720 0,050 0,770 0,778 0,778 0,778 OJ L, 31.12.2025 EN 181/2400

603 1,890 N/A 1,890 2,079 2,268 2,457 (K) 7604 10 10 Bars and rods 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7604 10 90 Profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7604 21 00 Hollow profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) OJ L, 31.12.2025 EN 183/2400

Azerbaijan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7604 29 10 Bars and rods 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7604 29 90 Profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7605 Aluminium wire 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7606 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7607 exceeding 0,2 mm 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7608 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7609 00 00 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 10 00 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 10 and lattice masts 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 90 Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) EN OJ L, 31.12.2025 184/2400

Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 10 and lattice masts 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 90 Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) EN OJ L, 31.12.2025 184/2400

11,902 12,984 14,066 Iron and steel 10% mark-up 20% mark-up 30% mark-up 2601 12 00 pyrites) 0,070 0,050 0,120 0,132 0,144 0,156 7201 – N/A – _ _ _ 7202 11 – N/A – _ _ _ 7202 19 weight <= 2% carbon – N/A – _ _ _ 7202 41 – N/A – _ _ _ 7202 49 – N/A – _ _ _ 7202 60 00 Ferro-nickel – N/A – _ _ _ EN OJ L, 31.12.2025 186/2400

ontinuous casting and iron of heading 7203) see below see below see below see below see below see below 7206 10 00 heading 7203) 0,130 N/A 0,130 0,143 0,156 0,169 (E) OJ L, 31.12.2025 EN 187/2400

= twice the thickness, rolled or 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 12 90 0,130 N/A 0,130 0,143 0,156 0,169 (E) OJ L, 31.12.2025 EN 189/2400

30 N/A 0,130 0,143 0,156 0,169 (E) 7207 12 10

= twice the thickness, rolled or 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 12 90 0,130 N/A 0,130 0,143 0,156 0,169 (E) OJ L, 31.12.2025 EN 189/2400

= twice the thickness, rolled or 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 191/2400

40 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 19 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 20 32

= twice the thickness, rolled or 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 191/2400

150 mm but < 600 mm and a 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 14 00 "wide flats") 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 193/2400

below see below see below 7211 13 00

150 mm but < 600 mm and a 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 14 00 "wide flats") 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 193/2400

elow 7214 10 00 coils) 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7214 20 00 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7214 30 00 rolling) 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 195/2400

) 7217 90 and rods) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7218 see below see below see below see below see below see below 7218 10 00 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 197/2400

4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341 7219 14 2,570 N/A 2,570 2,827 3,084 3,341 7219 21 2,570 N/A 2,570 2,827 3,084 3,341 7219 22 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 199/2400

3,084 3,341 7220 see below see below see below see below see below see below 7220 11 00 2,570 N/A 2,570 2,827 3,084 3,341 7220 12 00 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 201/2400

ow see below see below 7223 00 bars and rods) 2,570 N/A 2,570 2,827 3,084 3,341 7224 see below see below see below see below see below see below 7224 10 casting) 2,310 N/A 2,310 2,541 2,772 3,003 (H) OJ L, 31.12.2025 EN 203/2400

72 3,003 (H) 7224 90 18 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 31 casting 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 38 2,310 N/A 2,310 2,541 2,772 3,003 (H) OJ L, 31.12.2025 EN 205/2400

= 600 mm, hot-rolled or cold- see below see below see below see below see below see below 7225 11 00 3,710 N/A 3,710 4,081 4,452 4,823 (E) 7225 19 10 600 mm, hot-rolled 2,310 N/A 2,310 2,541 2,772 3,003 (E) 7225 19 90 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 30 = 600 mm, not further worked 2,310 N/A 2,310 2,541 2,772 3,003 (H) EN OJ L, 31.12.2025 206/2400

= 600 mm, not further worked 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 50 = 600 mm, not further worked steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 91 00 = 600 mm, hot-rolled or cold- electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 92 00 = 600 mm, hot-rolled or cold- 2,310 N/A 2,310 2,541

310 N/A 2,310 2,541 2,772 3,003 (H) 7225 91 00

= 600 mm, hot-rolled or cold- electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 92 00 = 600 mm, hot-rolled or cold- 2,310 N/A 2,310 2,541 2,772 3,003 (H) OJ L, 31.12.2025 EN 207/2400

= 600 mm, hot-rolled or cold- electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 "cold-reduced" see below see below see below see below see below see below 7226 11 00 3,710 N/A 3,710 4,081 4,452 4,823 (E) 7226 19 10 hot-rolled 2,310 N/A 2,310 2,541 2,772 3,003 (E) 7226 19 80 2,310 N/A 2,310 2,541 2,772 3,003 (H) EN OJ L, 31.12.2025 208/2400

6 92 00 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 99 or silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7227 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) OJ L, 31.12.2025 EN 209/2400

)/(H) 7228 40 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 50 or silico-manganese steel, semi- finished products, flat-rolled 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) OJ L, 31.12.2025 EN 211/2400

7303 00 cast iron 1,500 N/A 1,500 1,650 1,800 1,950 7304 see below see below see below see below see below see below 7304 11 00 steel 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 213/2400

0,288 0,312 (E) 7304 41 00 2,570 N/A 2,570 2,827 3,084 3,341 7304 49 2,570 N/A 2,570 2,827 3,084 3,341 7304 51 drilling for oil) 0,240 N/A 0,240 0,264 0,288 0,312 (H) OJ L, 31.12.2025 EN 215/2400

7306 21 00 406,4 mm 2,570 N/A 2,570 2,827 3,084 3,341 7306 29 00 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 12 "cold-reduced" 0,240 N/A 0,240 0,264 0,288 0,312 (E) OJ L, 31.12.2025 EN 217/2400

12 (E) 7306 30 80 pipe") 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 40 20 rolled "cold-reduced" (excl. products having internal and 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 219/2400

406,4 mm, and line pipe of a kind 2,570 N/A 2,570 2,827 3,084 3,341 7306 50 21 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7306 50 29 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7306 50 80 steel tubes) 0,240 N/A 0,240 0,264 0,288 0,312 (H) EN OJ L, 31.12.2025 220/2400

cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 69 10 2,570 N/A 2,570 2,827 3,084 3,341 OJ L, 31.12.2025 EN 221/2400

406,4 mm) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7307 see below see below see below see below see below see below 7307 11 malleable cast iron 1,500 N/A 1,500 1,650 1,800 1,950 7307 19 10 1,500 N/A 1,500 1,650 1,800 1,950 EN OJ L, 31.12.2025 222/2400

,360 2,596 2,832 3,068 7307 91 00 stainless products) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7307 92 stainless products) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7307 93 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 223/2400

below see below see below see below see below see below 7318 11 00 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 12 10 coach screws) 2,570 N/A 2,570 2,827 3,084 3,341 (E) OJ L, 31.12.2025 EN 225/2400

2,568 2,782 (E) 7318 16 2,220 N/A 2,220 2,442 2,664 2,886 (E) 7318 19 00 n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 21 00 0,140 N/A 0,140 0,154 0,168 0,182 (E) EN OJ L, 31.12.2025 226/2400

,143 0,156 0,169 (E) 7326 20 00 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 30 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 40 0,140 N/A 0,140 0,154 0,168 0,182 (E) OJ L, 31.12.2025 EN 227/2400

Azerbaijan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7326 90 50 of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 60 of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 92 forged, n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 94 forged, n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 96 n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 98 0,140 N/A 0,140 0,154 0,168 0,182 (E) Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement 10% mark-up 20% mark-up 30% mark-up 2507 00 80 Calcined clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 1,360 0,030 1,390 1,529 1,668 1,807 (A) 2523 21 00 1,280 0,130 1,410 1,551 1,692 1,833 EN OJ L, 31.12.2025 228/2400

d clay – – – _ _ _ 2523 10 00 White clinker – – – _ _ _ 2523 10 00 Grey clinker 1,360 0,030 1,390 1,529 1,668 1,807 (A) 2523 21 00 1,280 0,130 1,410 1,551 1,692 1,833 EN OJ L, 31.12.2025 228/2400

Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 2523 29 00 1,210 0,060 1,270 1,397 1,524 1,651 2523 90 00 1,310 0,170 1,480 1,628 1,776 1,924 (B) 2523 90 00 1,150 0,070 1,210 1,331 1,452 1,573 (A) 2523 30 00 Aluminous cement – – – _ _ _ Fertilisers 1% mark-up 1% mark-up 1% mark-up 2808 00 00 1,820 0,050 1,870 1,889 1,889 1,889 2814 10 00 Anhydrous ammonia 2,340 0,160 2,510 2,535 2,535 2,535 2814 20 00 0,700 0,050 0,750 0,758 0,758 0,758 2834 21 00 1,640 0,080 1,720 1,737 1,737 1,737 3102 nitrogenous see below see below see below see below see below see below 3102 10 12 weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566 OJ L, 31.12.2025 EN 229/2400

1,720 1,737 1,737 1,737 3102 nitrogenous see below see below see below see below see below see below 3102 10 12 weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566 OJ L, 31.12.2025 EN 229/2400

1,333 1,333 3102 30 90 1,920 0,120 2,040 2,060 2,060 2,060 3102 40 10 10 kg) 1,660 0,110 1,770 1,788 1,788 1,788 3102 40 90 10 kg) 1,660 0,110 1,770 1,788 1,788 1,788 OJ L, 31.12.2025 EN 231/2400

10 % by weight on the dry 10 kg) 0,840 0,110 0,950 0,960 0,960 0,960 3105 20 90 10 kg) 0,570 0,080 0,650 0,657 0,657 0,657 OJ L, 31.12.2025 EN 233/2400

0,090 0,800 0,808 0,808 0,808 3105 20 10

10 % by weight on the dry 10 kg) 0,840 0,110 0,950 0,960 0,960 0,960 3105 20 90 10 kg) 0,570 0,080 0,650 0,657 0,657 0,657 OJ L, 31.12.2025 EN 233/2400

Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3105 30 00 Diammonium hydrogenorthophosphate that in tablets or similar forms, or <= 10 kg) 0,550 0,070 0,620 0,626 0,626 0,626 3105 40 00 Ammonium dihydrogenorthophosphate diammonium hydrogenorthophosphate <= 10 kg) 0,350 0,050 0,400 0,404 0,404 0,404 3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,140 0,130 1,270 1,283 1,283 1,283 3105 59 00 phosphorus (excl. nitrates and phosphates) 0,630 0,110 0,740 0,747 0,747 0,747 EN OJ L, 31.12.2025 234/2400

phosphorus (nitrates and phosphates) 1,140 0,130 1,270 1,283 1,283 1,283 3105 59 00 phosphorus (excl. nitrates and phosphates) 0,630 0,110 0,740 0,747 0,747 0,747 EN OJ L, 31.12.2025 234/2400

Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 3105 90 20 or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,080 1,190 1,202 1,202 1,202 3105 90 80 0,570 0,060 0,630 0,636 0,636 0,636 Aluminium 10% mark-up 20% mark-up 30% mark-up 7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 1,690 N/A 1,690 1,859 2,028 2,197 (L) 7604 10 10 Bars and rods 1,910 N/A 1,910 2,101 2,292 2,483 (L) OJ L, 31.12.2025 EN 235/2400

601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 1,690 N/A 1,690 1,859 2,028 2,197 (L) 7604 10 10 Bars and rods 1,910 N/A 1,910 2,101 2,292 2,483 (L) OJ L, 31.12.2025 EN 235/2400

Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7604 10 90 Profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7604 21 00 Hollow profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7604 29 10 Bars and rods 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7604 29 90 Profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7605 Aluminium wire 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7606 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7607 exceeding 0,2 mm 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7608 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7609 00 00 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 10 00 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 10 and lattice masts 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 90 Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) EN OJ L, 31.12.2025 236/2400

Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 10 and lattice masts 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 90 Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) EN OJ L, 31.12.2025 236/2400

0% mark-up 20% mark-up 30% mark-up 2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066 Bahrain Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Aluminium 10% mark-up 20% mark-up 30% mark-up 7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 1,980 N/A 1,980 2,178 2,376 2,574 (K) 7604 10 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7604 10 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 21 00 Hollow profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 29 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) EN OJ L, 31.12.2025 238/2400

Bahrain Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM 7604 29 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 76

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 24397 --apply.