DGFT Minutes

1 Government of India / भारत सरकार Ministry of Commerce and Industry / वाणिज्य और उद्योग मंत्रालय Department of Commerce / वाणिज्‍य विभाग Directorate General of Foreign Trade, Delhi / विदेश व्यापार महानिदेशालय, दिल्ली VANIJYA BHAWAN, AKBAR ROAD, CENTRAL DELHI, DELHI, 110011 / वाणिज्य भवन, अकबर रोड, नई दिल्ली Email Office : egtf-dgft@gov.in , Phone Office : 011-23062777

(DES - I SECTION) MINUTES OF THE NORMS COMMITTEE- I

MEETING No. NC/1/MEET/Mar/202526/20 DATED: 07/04/2026

Please Note For information of exporters, Norms Committee - I handles all cases pertaining to fixation/ratification of norms for Export Products falling under ITC (HS) Chapter 81 to 84, 86 to 93 .Communications in respect of cases/pertaining to NC- I may be sent to email address: nc1.dgft@nic.in I. The Norms Committee has taken decision only with respect to technical aspect/wastage norms. While redeeming the applications, RAs should check that the applicant has fulfilled all requirements as prescribed in policy/procedure including those in Policy Circulars issued from time to time or any other provisions under FTP/HBP for EODC. II. Wherever the Committee has fixed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No.

xed Norms, the concerned RA may ensure that AA is issued on the wastages/consumption as ratified by the Committee or as per wastages claimed in the application, whichever is less. III. Meeting No. NC/1/MEET/Mar/202526/20 dated 07/04/2026 of Norms Committee - I for the year 2026-27 was held on 07/04/2026 under the Chairmanship of Abhinav Gupta,Additional DGFT to consider the following applications for ratification of norms in respect of advance authorizations under Duty Exemption Scheme (Chapter-4) of Foreign Trade Policy 2023. The following members were present in the meeting:- S.No. Name and Designation of Representatives Department 1 Harish Upadhayay,Joint DGFT DGFT(HQ) 2 Ashwani Ojha,Deputy Director DGFT(HQ) 3 Shaish Kumar,Technical Consultant DGFT 4 Sk Bhatnagar,Technical Consultant DGFT 5 Sushil Jain,Technical Consultant Department for Promotion of Industry & Internal Trade,Ministry of Commerce & Industry 6 Tr Choudhary,Technical Consultant MEITY 7 Vishan Agrawal,Technical Consultant DGFT

UDIN00082248AM27 This document has been digitally signed by Ashwani Kumar Ojha, Deputy Director,DGFT(HQ) on 08-May-2026. Digitally Signed. Name: ASHWANI KUMAR OJHA( Deputy Director ) Date: 08-May-2026 16:58:09 Reason: ak.ojha90@gov.in Location: DGFT(HQ) Signature Not Verified

, Deputy Director,DGFT(HQ) on 08-May-2026. Digitally Signed. Name: ASHWANI KUMAR OJHA( Deputy Director ) Date: 08-May-2026 16:58:09 Reason: ak.ojha90@gov.in Location: DGFT(HQ) Signature Not Verified

2 Case Details and Decision(s): Case No. 1 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HIGHLY ELECTRICAL APPLIANCES INDIA PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM APPLY 00390852AM22 RA File Number 08AX04000654 AM22 Licence No and Date 0811004414/17/03/2022

Norms Committee Decision:

The Committee considered the case as per agenda and decided to ratify the ad-hoc norms as per comments of DPIIT dated 08.04.2026, as under: Net weight of export item may be specified as 6.952 Kgs.each i.e. 382360 Kgs. 1. Quantity of import items at Sl.No. 1 & 4 to 17 may be allowed on net to net basis with accountability clause. 2. Quantity of import items at Sl.No. 2 & 3 may be allowed as applied for being less than 0.3 % of FOB value of exports. 3. Import items at Sl.No. 18 & 19 may be omitted as the firm has not submitted details of these items and their use in the export product. 4. Quantity of import item at Sl.No. 20 may be allowed on net to net basis as claimed by the firm. 5. RA concerned may take suitable consequential action accordingly.

Case No. 2 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006556AM25 RA File Number 04AX04000375 AM22 Licence No and Date 0411003194/27/04/2022 The Committee considered the case as per agenda and decided to call for the following information as per comments of concerned TE:

1. SUBMIT A COLOURED DRAWING OF EACH EXPORT PRODUCT AND ALSO INDICATE THE POSITION OF THE IMPORTED ITEMS IN THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

MIT A COLOURED DRAWING OF EACH EXPORT PRODUCT AND ALSO INDICATE THE POSITION OF THE IMPORTED ITEMS IN THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

3 2. WHAT IS THE REASON FOR ASKING FOR NIL WASTAGE WHEN THE IMPORTED ITEMS ARE IN GRAMS? HOW THE IMPORTED ITEMS IN GRAMS WILL BE ACCOUNTED FOR?

3. IS THERE ANY INDIGENOUS INPUT IN THE EXPORT PRODUCT?

4. ARE THE EXPORT ITEMS FOR DIFFERENT AUTO VEHICLES, OR WILL ALL THE EXPORT PRODUCTS BE USED FOR THE SAME VEHICLES, HAVING DIFFERENT MODELS? Case stands deferred.

Case No. 3 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004803AM26 RA File Number 05AX04001950 AM23 Licence No and Date 0511015196/07/10/2022

Brief write up of each EP units function /use 1. Specific items of export against item nos.4 & 10 with qty. 2. Description of EP 6,7& 8 is same.Please clarify. 3. Specific use/function of each import item in its EP. 4. Qty. of some of import items is less than qty. of EP where it is used. Please clarify. 5. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 6. Use of export product. 7.

Case No. 4 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Case No. 4 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

4 HQ File Number HQRNORM REVIW00004814AM26 RA File Number 05AX04001951 AM23 Licence No and Date 0511015197/07/10/2022 Brief write up of each EP units function /use. 1. Specific items of export against item nos.4 & 10 with qty. 2. Description of EP 6,7& 8 is same. Please clarify. 3. Specific use/function of each import item in its EP. 4. Qty. of some of import items is less than qty. of EP where it is used .Please clarify. 5. Assembly drawings/diagrams of the resultant product showing placement and exact use of components in the export product (s). 6. Use of export product. 7.

Case No. 5 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000718AM26 RA File Number 34AX04000667 AM23 Licence No and Date 3411002909/13/10/2022 comments of DPIIT dated 02.03.2026, as under:

Description, quantities and net weight of export items at SI.No.1 to 5 may be specified as under: 1.

SI.No. Description of export item at SI.No.1 Sub Category Quantity (In Nos.) Finished Weight (In Kgs) UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

as under: 1.

SI.No. Description of export item at SI.No.1 Sub Category Quantity (In Nos.) Finished Weight (In Kgs) UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5

Turbine Components Fastener made of Stainless Steel Round Bar namely, 1 PPS-T2-A0017-10/AD Covered Nut 8 26.720 2 PPS-T2-A0017-69-112.0-AD Extension Nut 3 7.605 3 PPS-G0-04270-01 Pin 6 0.390 4 PPS-G0-04270-01 Pin 24 1.560 5 PPS-G2-13712-01/606/BU Stud 18 135.360 6 PPS-JIS-B1181/M14 Hex Nut 1 0.100 7 PPS-871C877003 Key 4 1.168 8 PPS-1184J49P0007 Screw 10 2.010 9 PPS-G0-03173-01 Slotted Screw 97 8.730 10 PPS-G0-03173-01 Slotted Screw 320 29.760 11 PPS-G3-J0449-01-SF Washer 21 2.520 12 PPS-MSF3-A142X1240 Allen Bolt 15 0.750 13 PPS-N26-890-6324-02-SF Nut 2 19.600 14 PPS-G0-02957-04-SF Misc Fasteners 115 6.440 15 PPS-T210Q-000002-055-SF Washer 39 1.287 16 PPS-T210Q-000003-055-SF Washer 36 1.800 17 PPS-U607P310L0825 Stud 28 27.048 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

40 15 PPS-T210Q-000002-055-SF Washer 39 1.287 16 PPS-T210Q-000003-055-SF Washer 36 1.800 17 PPS-U607P310L0825 Stud 28 27.048 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

6 18 PPS-U623P309L0500 Hex Bolt 24 16.512 19 PPS-U624P310L0525 Allen Bolt 20 19.380 20 PPS-MSF3-A150B2470 Hex Bolt 18 4.896 21 PPS-U624P310L0488 Allen Bolt 17 15.776 22 PPS-U627P308L0350 Hex Bolt 15 6.750 23 PPS-U627P311L0400 Hex Bolt 5 5.495 24 PPS-U624P308L0300 Allen Bolt 2 0.800 25 PPS-U627P308L0462 Hex Bolt 8 4.584 26 PPS-U624P310L0750 Allen Bolt 9 10.980 27 PPS-U624P310L0350 Allen Bolt 10 7.770 28 PPS-09-51179-01 Hex Nut 4 4.340 29 PPS-G2-06107-02 Hex Bolt 6 1.242 30 PPS-MSF3-A414A1600 Hex Nut 40 1.320 31 PPS-G2-13824-01/450/BU Stud 2 5.420 32 PPS-09-51179-01 Hex Nut 10 10.600 33 PPS-T2-A0007-13/394.0/BU Stud 4 22.000 34 PPS-09-16192-M16C38 Hex Bolt 34 3.060 35 PPS-T200Q-000051-004 Extension Nut 1 1.380 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

PS-T2-A0007-13/394.0/BU Stud 4 22.000 34 PPS-09-16192-M16C38 Hex Bolt 34 3.060 35 PPS-T200Q-000051-004 Extension Nut 1 1.380 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

7 36 PPS-T200Q-000038-001 Extension Nut 1 1.640 37 PPS-T200Q-000041-001 Extension Nut 1 3.250 38 PPS-TG21Q-000343-001 Pin 2 0.180 39 PPS-TG21Q-000344-001 Pin 4 0.192 40 PPS-6800682-3 Slotted Screw 28 2.352 41 PPS-MSF3-A160B1660 Allen Bolt 84 10.920 42 PPS-T2-A0007-13/394.0/BU Stud 6 33.000 43 PPS-U606P314L0844 Stud 8 18.400 44 PPS-4438D81006-SF Hex Nut 1 3.000 45 PPS-T210Q-000002-055-SF Washer 9 0.288 46 PPS-T210Q-000003-055-SF Washer 9 0.360 47 PPS-31-59751-04/BU Screw 42 0.840 48 PPS-G0-02850-32/C100 Pin 2 1.500 49 PPS-G0-03131-02-SF 12 Point Bolt 2 0.620 50 PPS-06643283P0615 Stud 10 98.000 51 PPS-0926E715P0759 Stud 2 62.880 52 PPS-0926E715P0756 Stud 2 54.560 53 PPS-0926E715P0749 Stud 2 45.320 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

0615 Stud 10 98.000 51 PPS-0926E715P0759 Stud 2 62.880 52 PPS-0926E715P0756 Stud 2 54.560 53 PPS-0926E715P0749 Stud 2 45.320 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

8 54 PPS-0926E715P0690 Stud 1 19.340 55 PPS-871C877003 Key 2 0.760 56 PPS-T2-M3243-03 Key 2 0.476 57 PPS-TG21Q-000104-001 Pin 4 0.240 58 PPS-TG21Q-000139-001 Pin 1 0.010 59 PPS-TG21Q-000165-001 Pin 3 0.780 60 PPS-TG21Q-000166-001 Pin 4 0.260 61 PPS-TG21Q-000105-001 Pin 4 0.760 62 PPS-TG21Q-000126-001 Pin 3 0.270 63 PPS-TG21Q-000126-003 Pin 3 0.270 64 PPS-TG11Q-000100-001 Pin 1 0.030 65 PPS-254A6656P0002-SF Pin 1 2.100 66 PPS-N26-162-0024-111 Extension Nut 1 0.863 67 PPS-CT-00089-03 Covered Nut 2 9.640 68 PPS-T2-A0017-10/124.0/AD Extension Nut 10 38.200 69 PPS-0926E715P0757 Stud 2 57.760 70 PPS-TG21Q-000126-003 Pin 4 0.088 71 PPS-MSF3-A160B1640 Allen Bolt 3 0.300 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

9 SI.No. Description of Export item at SI.No.2 Sub Category Quantity (In Nos.) Finished Weight (In Kgs.)

Turbine Components Fastners (Made of Alloy Steel Round Bar) 1 PPS-GQ-J2663-01 Screw 244 28.060 2 PPS-G0-02393-05 Stud 2 8.800 3 PPS-101A634BC-122 Allen Bolt 12 4.164 4 PPS-310PB44-146-7 Stud 20 116.000 5 PPS-310PB44-146-5 Stud 20 126.800 6 PPS-MSF3-A160D1630 Allen Bolt 71 5.751 7 PPS-U607P212L0712 Stud 8 9.600 72 PPS-MSF3-A474A3675 Hex Nut 4 3.520 73 PPS-N25-851-0094-02 Covered Nut 4 10.000 74 PPS-09-51179-02 Hex Nut 4 3.440 75 PPS-TG21Q-000100-001 Pin 3 0.081 76 PPS-09-51179-02 Hex Nut 2 1.720 77 PPS-U606P314L0937 Stud 2 4.440 78

Nut 4 3.520 73 PPS-N25-851-0094-02 Covered Nut 4 10.000 74 PPS-09-51179-02 Hex Nut 4 3.440 75 PPS-TG21Q-000100-001 Pin 3 0.081 76 PPS-09-51179-02 Hex Nut 2 1.720 77 PPS-U606P314L0937 Stud 2 4.440 78 PPS-U606P318L1462 Stud 4 28.480 79 PPS-09-16192-M16C38 Hex Bolt 8 0.800 TOTAL 1273 937.083 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

10 8 PPS-CT-00089-01 Covered Nut 3 6.300 9 PPS-MSF3-C777G0010-SF Hex Bolt 116 1.508 10 PPS-9646448P0001 Pin 3 14.940 11 PPS-234A6320P0004 Washer 9 1.323 12 PPS-238A873P0119 Misc Fasteners 2 5.672 13 PPS-MSF3-A160D1630 Allen Bolt 108 8.640 14 PPS-164A9760P0001-SF Pin 4 66.240 15 PPS-01078J88P0001 Hex Bolt 27 19.440 16 PPS-U613X000P0204 Hex Nut 8 0.160 17 PPS-363B413H14-SF Washer 5 1.910 18 PPS-197B625P0001-SF Nut 1 9.900 19 PPS-182A9802P0001 Screw 100 9.700 20 PPS-363B412H03-SF Washer 98 1.078 21 PPS-363B412H05-SF Washer 85 1.700 22 PPS-D430470P0001 Slotted Screw 32 1.120 23 PPS-31-42402-02-SF Washer 27 0.270 24 PPS-31-42402-10-SF Washer 23 2.070 25 PPS-363B414H12-SF Washer 35 8.680 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ew 32 1.120 23 PPS-31-42402-02-SF Washer 27 0.270 24 PPS-31-42402-10-SF Washer 23 2.070 25 PPS-363B414H12-SF Washer 35 8.680 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

11 26 PPS-363B413H11-SF Washer 21 4.095 27 PPS-2149J46G0003 Hex Bolt 30 3.540 28 PPS-31-42402-09-SF Washer 11 0.858 29 PPS-U627P206L0725 Hex Bolt 10 4.170 30 PPS-U627P208L0318 Hex Bolt 6 2.610 31 PPS-U625P206L0600 Allen Bolt 8 2.936 32 PPS-U6913435P0006 Stud 6 1.002 33 PPS-156A1591P018 Stud 5 12.670 34 PPS-U624P206L0850 Hex Bolt 5 2.075 35 PPS-T411119-01-SF Hex Nut 4 2.900 36 PPS-06913435P0006 Stud 1 0.173 37 PPS-GQ-J0434-02 Pin 1 7.260 38 PPS-MSF3-A160D1630 Allen Bolt 94 7.708 39 PPS-OG-01117-01 Stud 2 0.132 40 PPS-187C4482P0016 Covered Nut 4 56.960 41 PPS-N278P00058 Hex Nut 22 57.200 42 PPS-U615X000P0219-COPPERPLATED- SF Slotted Nut 32 118.400 43 PPS-T28B630P008-SF Washer 40 4.120 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

8P00058 Hex Nut 22 57.200 42 PPS-U615X000P0219-COPPERPLATED- SF Slotted Nut 32 118.400 43 PPS-T28B630P008-SF Washer 40 4.120 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

12 44 PPS-T28B607P009-SF Washer 36 2.592 45 PPS-MSF3-A150D1630 Hex Bolt 24 1.920 46 PPS-271A8255P0002-SF Pin 6 69.600 47 PPS-264A1041P0001-SF Washer 24 9.120 48 PPS-281A8259P0001 Stud 1 0.048 49 PPS-U408A309L0156 Pin 2 0.098 50 PPS-06913435P0006 Stud 2 0.330 51 PPS-271A8237P0001 Hex Bolt 1 1.468 52 PPS-271A8237P0001 Hex Bolt 1 1.468 53 PPS-254A6643P0001-SF Pin 1 3.200 54 PPS-234A6865P0001-SF Pin 1 17.100 55 PPS-281A8266P0001 Stud 1 0.108 56 PPS-U614X000P0214 Covered Nut 3 5.100 57 PPS-U408A304L0493 Pin 2 0.064 58 PPS-U408A304L0344 Pin 8 0.184 59 PPS-U627P104L0225 Hex Bolt 12 0.780 60 PPS-U408A304L0387 Pin 2 0.046 61 PPS-U615X000P0222-SF Slotted Nut 16 170.720 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

13 62 PPS-F404A112-SF Nut 24 6.240 63 PPS-T307954/CL2/M42X3.0-SF Washer 8 0.624 64 PPS-U607P212L0712 Stud 4 4.800 65 PPS-U615X000P0221 Slotted Nut 4 27.920 66 PPS-U615X000P0221 Slotted Nut 4 27.920 67 PPS-U605P221L2562 Stud 2 54.000 68 PPS-U605P221L2162 Stud 2 44.200 69 PPS-9113610P0004 Key 2 0.026 70 PPS-9113610P0006 Key 2 0.040 71 PPS-363B413H02-SF Washer 56 1.120 72 PPS-234A6867P0001-SF Misc Fasteners 1 33.360 73 PPS-234A6864P0001-SF Pin 1 24.580 74 PPS-234A6851P0001-SF Pin 1 25.600 75 PPS-G2-04862-14-SF Washer 8 9.740 76 PPS-TSHWFA02681730197FNBA-SF Washer 28 2.324 77 PPS-TSHWFA03462280394FNBA-SF Washer 56 15.008 78 PPS-6800357-1-SF Washer 6

74 PPS-234A6851P0001-SF Pin 1 25.600 75 PPS-G2-04862-14-SF Washer 8 9.740 76 PPS-TSHWFA02681730197FNBA-SF Washer 28 2.324 77 PPS-TSHWFA03462280394FNBA-SF Washer 56 15.008 78 PPS-6800357-1-SF Washer 6 0.432 79 PPS-U614X000P0216 Covered Nut 18 43.380 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

14 80 PPS-U615X000P0223 Slotted Nut 6 86.040 81 PPS-U605P216L1325 Stud 16 64.000 82 PPS-U614X000P0214-SF Covered Nut 55 93.500 83 PPS-136B234P0001-SF Misc Fasteners 2 5.000 84 PPS-U614X000P0214 Covered Nut 79 135.880 85 PPS-U408A204L0243 Pin 24 0.336 86 PPS-163A8162P0001 Pin 7 0.126 87 PPS-K4804857P0169 Pin 7 0.231 88 PPS-K4804857P0148 Pin 5 0.127 89 PPS-163A8152P0001 Pin 4 0.618 90 PPS-U409A304L0062-SF Pin 6 0.120 91 PPS-U409A308L0518-SF Pin 4 0.520 92 PPS-PH-00485-38 Allen Bolt 4 0.040 93 PPS-U627P108L0250 Hex Bolt 33 12.111 94 PPS-163A8154P0001-SF Misc Fasteners 1 0.799 95 PPS-323B5435P0013 Pin 10 0.300 96 PPS-9386898G0001-SF Pin 4 4.432 97 PPS-5549676P0007 Screw 30 0.600 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

c Fasteners 1 0.799 95 PPS-323B5435P0013 Pin 10 0.300 96 PPS-9386898G0001-SF Pin 4 4.432 97 PPS-5549676P0007 Screw 30 0.600 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

15 98 PPS-U615X000P0221 Slotted Nut 90 636.300 99 PPS-208B8934P0106 Misc Fasteners 2 2.528 100 PPS-MSF3-A160D1640 Screw 124 12.152 101 PPS-363B412H10-SF Washer 79 7.110 102 PPS-U623P212L0500 Hex Bolt 33 48.180 103 PPS-U624P210L0700 Screw 27 31.320 104 PPS-09119588P0001 Pin 25 5.400 105 PPS-363B414H11-SF Washer 23 7.130 106 PPS-U624P208L0800 Allen Bolt 24 17.760 107 PPS-03H0653002 Screw 13 0.260 108 PPS-101A636AF-1 Hex Bolt 9 3.717 109 PPS-199A1553P0007 Hex Bolt 9 4.320 110 PPS-U614X000P0210-SF Covered Nut 4 3.384 111 PPS-363B413H15-SF Washer 103 48.410 112 PPS-02149J46G0001 Hex Bolt 34 4.250 113 PPS-144V291P0001 Slotted Screw 24 2.304 114 PPS-U623P212L0400 Hex Bolt 16 20.400 115 PPS-U409A305L0338-SF Pin 10 0.353 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

0 113 PPS-144V291P0001 Slotted Screw 24 2.304 114 PPS-U623P212L0400 Hex Bolt 16 20.400 115 PPS-U409A305L0338-SF Pin 10 0.353 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

16 116 PPS-241A374P0001-SF Misc Fasteners 1 2.820 117 PPS-U616P210L0587 Stud 10 8.320 118 PPS-U624P210L0850 Hex Bolt 3 3.990 119 PPS-K4804857P0147 Pin 10 0.100 120 PPS-U408A306L0325 Pin 6 0.282 121 PPS-GQ-J2663-01 Screw 105 11.550 122 PPS-233A7040P0001-SF Pin 4 48.960 123 PPS-U627P108L0950 Hex Bolt 1 1.066 124 PPS-U613X000P0218 Hex Nut 2 4.000 125 PPS-U408A304L0387 Pin 4 0.180 126 PPS-U613X000P0204 Hex Nut 55 1.100 127 PPS-08954954P0069 Allen Bolt 6 0.300 128 PPS-U408A304L0293 Pin 4 0.080 129 PPS-U408A304L0493 Pin 1 0.040 130 PPS-09-07503-13 Hex Nut 24 65.520 131 PPS-201T224001-SF Nut 9 7.200 132 PPS-6800335 Screw 20 2.000 133 PPS-363B413H15-SF Washer 20 9.100 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

17 134 PPS-363B414H15-SF Washer 17 9.435 135 PPS-N26-891-5296-02-SF Nut 1 1.060 136 PPS-MSF3-A160D1630 Allen Bolt 38 3.040 137 PPS-U624P210L1050 Allen Bolt 12 18.480 138 PPS-U624P210L0850 Hex Bolt 10 13.200 139 PPS-U604X000P0428-SF Slotted Nut 2 113.080 140 PPS-128C306AA-1-SF Misc Fasteners 1 2.460 141 PPS-U613X000P0219 Hex Nut 79 213.300 142 PPS-U615X000P0218 Slotted Nut 57 166.440 143 PPS-U606P216L1150 Stud 36 123.840 144 PPS-6643072P0016-SF Allen Bolt 22 1.100 145 PPS-U613X000P0218 Hex Nut 9 18.000 146 PPS-U625P204L0263 Allen Bolt 8 0.640 147 PPS-208B8908P0101-SF Misc Fasteners 4 6.320 148 PPS-U613X000P0219 Hex Nut 6 16.200 149

0016-SF Allen Bolt 22 1.100 145 PPS-U613X000P0218 Hex Nut 9 18.000 146 PPS-U625P204L0263 Allen Bolt 8 0.640 147 PPS-208B8908P0101-SF Misc Fasteners 4 6.320 148 PPS-U613X000P0219 Hex Nut 6 16.200 149 PPS-181A7376P0005 Washer 161 51.520 150 PPS-U614X000P0212 Covered Nut 50 58.050 151 PPS-U605P216L1625 Stud 40 194.400 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

18 152 PPS-U615X000P0219 Slotted Nut 40 152.000 153 PPS-U615X000P0222-SF Slotted Nut 4 42.560 154 PPS-U624P206L0800 Allen Bolt 4 1.600 155 PPS-GQ-J2663-01 Screw 176 18.480 156 PPS-101A743AF-2 Pin 2 0.100 157 PPS-101A775BC-1 Pin 2 11.000 158 PPS-31-42402-05-SF Washer 30 0.900 TOTAL 3777 4017.766

SI.No Description of Export item at SI.No.3 Sub Category Quantity (In Nos.) Finished Weight (In Kgs)

Turbine Components Valve Parts (Made of Stainless Steel Round Bar) 1 PPS-497C925002-SF STEM 2 12.900 2 PPS-222A6357P0001-SF CONTROL VALVE INNER VALVE DISC 4 4.996 3 PPS-N26-890-7693-01-SF SPRING SEAT 1 0.742 4 PPS-6041J58005-SF Spring Guide 1 13.200 5 PPS-4785D31001-SF Throttle Valve Stem 1 8.700 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

890-7693-01-SF SPRING SEAT 1 0.742 4 PPS-6041J58005-SF Spring Guide 1 13.200 5 PPS-4785D31001-SF Throttle Valve Stem 1 8.700 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

19 6 PPS-TG21Q-000016-002 Adjusting Liner 4 4.428 7 PPS-TG21Q-000049-001 SPACER 10 3.600 8 PPS-31-59751-04/BU SET SCREW 19 0.171 9 PPS-N26-890-5659-02-SF REHEAT STOP VALVE SHOULDER RING 1 0.280 10 PPS-N26-150-0015-16 Hex Nut 10 2.000 TOTAL 53 51.017

SI.No. Description of Export item at SI.No.4 Sub Category Quantity (In Nos.) Finished Weight (In Kgs) Turbine Components Valve Parts (Made of Alloy Steel Round Bar) 1 PPS-207B1173P0101-SF CONTROL VALVE BUSHING 1 17.860 2 PPS-N26-220-5010-21-SF Bushing 2 0.746 3 PPS-182A4939P0007-SF BUSHING FOR TILT PAD BEARING 11 0.462 4 PPS-264A1041P0001-SF RING 4 1.444 5 PPS-162C2585P0001-SF BY PASS DISC 8 96.960 6 PPS-361C947P0001-SF DISC 1 66.460 7 PPS-T3-R3923-01-SPARE-SF Bushing 1 3.000 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 PPS-162C2585P0001-SF BY PASS DISC 8 96.960 6 PPS-361C947P0001-SF DISC 1 66.460 7 PPS-T3-R3923-01-SPARE-SF Bushing 1 3.000 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

20 8 PPS-0128Y409P0001 SPACER 3 0.117 9 PPS-264A8895P0001 SLIP RING 1 0.707 10 PPS-199A1726P0101-SF VALVE SEAT 1 4.900 11 PPS-U534F250DLAN2 SEAL & FIT RING 1 1.090 12 PPS-U530F250DLAL2 OUTER SEAL RING 1 0.920 13 PPS-128V756P0001 SPACER 1 0.335 14 PPS-134B219DA-1-SF Bushing 1 5.800 15 PPS-09461187P0001-SF Bushing 2 0.040 16 PPS-N26-890-5659-07-SF Bushing 2 7.400 17 PPS-N26-220-5010-02-SF Bushing 1 0.277 18 PPS-N26-220-5010-21-SF Bushing 2 0.740 19 PPS-N26-220-5010-22-SF Bushing 1 0.518 20 PPS-N26-220-5010-23-SF Bushing 2 0.480 21 PPS-4476D51002-SF STEM 1 109.000 22 PPS-4476D51003-SF STEM 1 154.000 23 PPS-126C3730P0001-SF Control Valve 1 30.000 24 PPS-126C3734P0001-SF C V Disc 1 30.000 25 PPS-4476D37006-SF Shaft 1 114.000 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

3 PPS-126C3730P0001-SF Control Valve 1 30.000 24 PPS-126C3734P0001-SF C V Disc 1 30.000 25 PPS-4476D37006-SF Shaft 1 114.000 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

21 26 PPS-162C2631P0001-SF Control Valve 1 20.720 27 PPS-N26-890-7689-02-SF VALVE COUPLING 1 20.720 28 PPS-4476D37007-SF Shaft 1 114.000 29 PPS-101T6088P0001 Control Valve 2 97.040 30 PPS-199D4233P0001 Control Valve Outer Disc 1 10.180 31 PPS-N26-890-7689-02-SF VALVE COUPLING 1 20.720 32 PPS-208B8908P0101-SF Ring 4 6.320 33 PPS-6038J58023-SF Governer Valve Crosshead 1 13.640 34 PPS-208B8934P0106 KEEPER RING MAIN STOP VALVE 1 1.260 35 PPS-197B625P0001-SF Nut 1 9.460 36 PPS-786D861001-SF THROTTLE VALVE SPRING SEAT 1 0.310 37 PPS-203D4532P0001 VALVE 9.25 STOP VALVE 2 32.040 38 PPS-TG27Q-000015- 001/SPARE-SF Bushing 2 2.320 39 PPS-178C9165P0001-SF Main stop valve Bypass disc 3 77.040 TOTAL 74 1073.026

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

27Q-000015- 001/SPARE-SF Bushing 2 2.320 39 PPS-178C9165P0001-SF Main stop valve Bypass disc 3 77.040 TOTAL 74 1073.026

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

22 SI.No Description of Export item at SI.No.5 Sub Category Quantity (In Nos.) Finished Weight (In Kgs)

Turbine Components Valve Parts (Made of Hollow Round Bar) 1 PPS-208B8934P0106 Keeper Ring Main Stop Valve 1 1.260 TOTAL 1 1.260

2. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No1 and its quantity may be allowed as 1622.34 Kgs as 1.73 Kgs./Kg content in the export item at SI.No.1 after taking 20% recovery from the scrap.

3. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 8876.12 Kgs as 2.20 Kgs./Kg content in the export item at SI.No.2 after taking 20% recovery from the scrap.

4. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 131.01 Kgs as 2.56 Kgs./Kg content in the export item at SI.No.3 after taking 20% recovery from the scrap.

5. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 2045.71 Kgs as 1.90 Kgs./Kg content in the export item at SI.No.4 after taking 20% recovery from the scrap.

ined / utilized in the export item at SI.No.4 and its quantity may be allowed as 2045.71 Kgs as 1.90 Kgs./Kg content in the export item at SI.No.4 after taking 20% recovery from the scrap.

6. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No. 5 and its quantity may be allowed as 3.09 Kgs as 2.45 Kgs./Kg content in the export item at SI.No.5 after taking 20% recovery from the scrap.

Case No. 6 / NC/1/MEET/Mar/202526/20 Case Status Case Approved UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

23 Party Name ITT ENGINEERING INDIA PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM REVIW00004574AM26 RA File Number 03AX04003606 AM23 Licence No and Date 0311018683/18/10/2022 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed earlier as per comments of Consultant (SKB) dated 06.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED ITEM NO 1 TO 14:
FINNED PIPES 1 % WASTAGE ON THE NET WEIGHT OF THE FINNED PIPES IN THE EXPORT PRODUCT ITEM NO 15 TO 47: SEAMLESS PIPES 1 % WASTAGE ON THE NET WEIGHT OF THE FINNED PIPES IN THE EXPORT PRODUCT ITEM NO 48 TO 70 ELBOW, RETURN BEND, CAP, HALF COUPLINGS, TEE, CONC.

XPORT PRODUCT ITEM NO 15 TO 47: SEAMLESS PIPES 1 % WASTAGE ON THE NET WEIGHT OF THE FINNED PIPES IN THE EXPORT PRODUCT ITEM NO 48 TO 70 ELBOW, RETURN BEND, CAP, HALF COUPLINGS, TEE, CONC. REDUCER, REDUCING TEE NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. ITEM NO 71 TO 75: WELDOLET BW NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. ITEM NO 76 TO 78: INSULATING CASTABLE 1 % WASTAGE ON THE NET WEIGHT OF THE FINNED PIPES IN THE EXPORT PRODUCT ITEM NO 79 TO 83: 1 % WASTAGE ON THE 1 FIRED HEATER 1 SET UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

24 CERAMIC FIBRE BLANKET, CERAMIC PAPER & CERAMIC FIBRE ROPE. NET WEIGHT OF THE FINNED PIPES IN THE EXPORT PRODUCT ITEM NO 84: REFRACTORY GLUE UPTO 1% OF F.O.B. VALUE OR AS APPLIED FOR, WHICHEVER IS LOWER.

NOTE:

1. THE NUMBER OF PIECES OF PIPE IN THE EXPORT PRODUCT SHOULD BE EQUAL TO THE NUMBER OF PIECES OF THE IMPORTED PIPES. 2 THE GRADE OF FINNED AND SEAMLESS PIPES IN THE EXPORT PRODUCT SHOULD MATCH THE GRADE OF IMPORTED FINNED AND SEAMLESS PIPES.
2. THE GRADE AND SPECIFICATIONS OF IMPORTED ELBOW, RETURN BEND, CAP, HALF COUPLING, TEE, CONC. REDUCER, REDUCING TEE & WELDOLET SHOULD MATCH WITH THE GRADE AND SPECIFICATIONS OF ELBOW, RETURN BEND, CAP, HALF COUPLING, TEE, CONC.

OF IMPORTED ELBOW, RETURN BEND, CAP, HALF COUPLING, TEE, CONC. REDUCER, REDUCING TEE & WELDOLET SHOULD MATCH WITH THE GRADE AND SPECIFICATIONS OF ELBOW, RETURN BEND, CAP, HALF COUPLING, TEE, CONC. REDUCER, REDUCING TEE & WELDOLET, GOING IN THE EXPORT PRODUCT.

Case No. 7 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name KLOECKNER DESMA MACHINERY PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004772AM26 RA File Number 08AX04001471 AM23 Licence No and Date 0811006780/16/12/2022 The Committee considered the case as per agenda and noted from the comments of concerned TE that the firm wants to import used machine viz., BRUSHING UNIT FOR ALPHA 400 H and after refurbishing, it will export the same. Under the duty exemption scheme, exports of such refurbished items are not allowed. The Committee, after deliberating upon the case, decided to refer the case to PC-4 section for necessary clarification.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

e Committee, after deliberating upon the case, decided to refer the case to PC-4 section for necessary clarification.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

25

Case No. 8 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005841AM23 RA File Number 31AX04000297 AM23 Licence No and Date 3111001976/20/01/2023 comments of DPIIT dated 18.03.2026, as under:

Net weight of export item may be specified as 49,470 Kgs. containing 1364 Nos. of Tubes (Import item). 1. Import item at SI No. 1 shall be of relevant grade and size as contained/utilized in the export item and its quantity may be allowed as 1364 Nos. on net to net basis.
2.

Case No. 9 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name THERMAX LIMITED. Meeting Number and Date HQ File Number HQRNORM APPLY 00005842AM23 RA File Number 31AX04000300 AM23 Licence No and Date 3111001977/20/01/2023 comments of DPIIT dated 18.03.2026, as under:

Net weight of export item may be specified as 39,320 Kgs. containing 444 Nos. of Tubes (Import item). 1. Import item at SI No. 1 shall be of relevant grade and size as contained/utilized in the export item and its quantity may be allowed as 444 Nos. on net to net basis. 2.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

de and size as contained/utilized in the export item and its quantity may be allowed as 444 Nos. on net to net basis. 2.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

26 Case No. 10 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006643AM23 RA File Number 04AX04001036 AM23 Licence No and Date 0411004952/27/02/2023 comments of Meity dated 07.04.2026, as under: SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 1 OPTICAL FIBRE CABLE- UNARMOURED- 2F-G657A1-UT 7000 KME Filling Gel- LT- 410-A 11,203.780 KGS 2 OPTICAL FIBRE CABLE- UNARMOURED- 4F-UT 600 KME Filling Gel- LT- 410-A 899.544 KGS 3 OPTICAL FIBRE CABLE- UNARMOURED- 8F-UT 600 KME Filling Gel- LT- 410-A 777.984 KGS 4 OPTICAL FIBRE CABLE- UNARMOURED- 12F-UT 600 KME Filling Gel- LT- 410-A 662.502 KGS 5 OPTICAL FIBRE CABLE- UNARMOURED- 24F-UT 600 KME Filling Gel- LT- 410-A 583.488 KGS OPTICAL FIBRE CABLE- UNARMOURED 6 600 KME Filling Gel- LT- 410-A 826.608 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

• LT- 410-A 583.488 KGS OPTICAL FIBRE CABLE- UNARMOURED 6 600 KME Filling Gel- LT- 410-A 826.608 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

27 ADSS-2F-UT 7 OPTICAL FIBRE CABLE- UNARMOURED ADSS-4F-UT 300 KME Filling Gel- LT- 410-A 382.914 KGS 8 OPTICAL FIBRE CABLE- UNARMOURED ADSS-8F-UT 300 KME Filling Gel- LT- 410-A 325.173 KGS 9 OPTICAL FIBRE CABLE- UNARMOURED ADSS-12F-UT 300 KME Filling Gel- LT- 410-A 161.067 KGS 10 OPTICAL FIBRE CABLE- UNARMOURED ADSS-24F-UT 300 KME Filling Gel- LT- 410-A 224.886 KGS 11 OPTICAL FIBRE CABLE- UNARMOURED ADSS-24F-MLT 500 KME Filling Gel- LT- 410-A 1,585.345 KGS 12 OPTICAL FIBRE CABLE- UNARMOURED ADSS-48F-MLT 500 KME Filling Gel- LT- 410-A 3,170.690 KGS 13 OPTICAL FIBRE CABLE- UNARMOURED ADSS-72F-MLT 500 KME Filling Gel- LT- 410-A 4,756.035 KGS 14 OPTICAL FIBRE CABLE- UNARMOURED ADSS-96F-MLT 500 KME Filling Gel- LT- 410-A 6,346.445 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

4,756.035 KGS 14 OPTICAL FIBRE CABLE- UNARMOURED ADSS-96F-MLT 500 KME Filling Gel- LT- 410-A 6,346.445 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

28 15 OPTICAL FIBRE CABLE- UNARMOURED ADSS-144F-MLT 500 KME Filling Gel- LT- 410-A 9,517.135 KGS 16 OPTICAL FIBRE CABLE- UNARMOURED- 12F-MLT 500 KME Filling Gel- LT- 410-A 329.225 KGS 17 OPTICAL FIBRE CABLE- UNARMOURED- 24F-MLT 500 KME Filling Gel- LT- 410-A 916.765 KGS 18 OPTICAL FIBRE CABLE- UNARMOURED- 36F-MLT 500 KME Filling Gel- LT- 410-A 283.640 KGS 19 OPTICAL FIBRE CABLE- UNARMOURED- 48F-MLT 500 KME Filling Gel- LT- 410-A 91.170 KGS 20 OPTICAL FIBRE CABLE- UNARMOURED- 96F-MLT 250 KME Filling Gel- LT- 410-A 91.170 KGS 21 OPTICAL FIBRE CABLE- UNARMOURED- 144F-MLT 250 KME Filling Gel- LT- 410-A 134.227 KGS 22 OPTICAL FIBER CABLE-MINI- UNARMOURED- 12F-MLT 250 KME Filling Gel- LT- 410-A 40.520 KGS OPTICAL FIBER CABLE-MINI- 23 500 KME Filling Gel- LT- 410-A 167.145 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

g Gel- LT- 410-A 40.520 KGS OPTICAL FIBER CABLE-MINI- 23 500 KME Filling Gel- LT- 410-A 167.145 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

29 UNARMOURED- 24F-MLT 24 OPTICAL FIBER CABLE-MINI- UNARMOURED- 48F-MLT 500 KME Filling Gel- LT- 410-A 329.225 KGS 25 OPTICAL FIBER CABLE-MINI- UNARMOURED- 96F-MLT 250 KME Filling Gel- LT- 410-A 329.225 KGS 26 OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-MLT 250 KME Filling Gel- LT- 410-A 496.370 KGS 27 OPTICAL FIBER CABLE-MINI- UNARMOURED- 12F-G657A1-MLT 500 KME Filling Gel- LT- 410-A 81.040 KGS 28 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-G657A1-MLT 500 KME Filling Gel- LT- 410-A 167.145 KGS 29 OPTICAL FIBER CABLE-MINI- UNARMOURED- 48F-G657A1-MLT 500 KME Filling Gel- LT- 410-A 329.225 KGS 30 OPTICAL FIBER CABLE-MINI- UNARMOURED- 96F-G657A1-MLT 500 KME Filling Gel- LT- 410-A 658.450 KGS OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-G657A1- 31 500 KME Filling Gel- LT- 410-A 992.740 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

658.450 KGS OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-G657A1- 31 500 KME Filling Gel- LT- 410-A 992.740 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

30 MLT

Case No. 11 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006912AM23 RA File Number 04AX04001090 AM23 Licence No and Date 0411005039/10/03/2023 comments of Meity dated 25.03.2026, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 500 Single Mode Optical Fiber- G657A1 (Natural) 6,290.730 KM 500 Polybutylene Terephthalate (PBT)-JD-3019 1,060.800 KG 1 OPTICAL FIBER CABLE-MINI- UNARMOURED- 12F-G657A1-MLT 500 KME Borstar HE 6062 HD polyethylene 9,642.500 KG 500 Single Mode Optical Fiber- G657A1 (Natural) 12,581.460 KM 500 Polybutylene Terephthalate (PBT)-JD-3019 2,111.400 KG 2 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-G657A1-MLT KME UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ybutylene Terephthalate (PBT)-JD-3019 2,111.400 KG 2 OPTICAL FIBER CABLE-MINI- UNARMOURED- 24F-G657A1-MLT KME UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

31 500 Borstar HE 6062 HD polyethylene 9,642.500 KG 500 Single Mode Optical Fiber- G657A1 (Natural) 25,162.920 KM 500 Polybutylene Terephthalate (PBT)-JD-3019 4,233.000 KG 3 OPTICAL FIBER CABLE-MINI- UNARMOURED- 48F-G657A1-MLT 500 KME Borstar HE 6062 HD polyethylene 9,642.500 KG 500 Single Mode Optical Fiber- G657A1 (Natural) 50,325.840 KG 500 Polybutylene Terephthalate (PBT)-JD-3019 8,466.000 KG 4 OPTICAL FIBER CABLE-MINI- UNARMOURED- 96F-G657A1-MLT 500 KME Borstar HE 6062 HD polyethylene 11,225.900 KG 500 Single Mode Optical Fiber- G657A1 (Natural) 75,488.760 KG 500 Polybutylene Terephthalate (PBT)-JD-3019 12,699.000 KG 5 OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-G657A1- MLT 500 KME Borstar HE 6062 HD polyethylene 11,895.800 KG

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 OPTICAL FIBER CABLE-MINI- UNARMOURED- 144F-G657A1- MLT 500 KME Borstar HE 6062 HD polyethylene 11,895.800 KG

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

32

Case No. 12 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006557AM25 RA File Number 04AX04001058 AM23 Licence No and Date 0411005111/23/03/2023

1. SUBMIT A COLOURED DRAWING OF EACH EXPORT PRODUCT AND ALSO INDICATE THE POSITION OF THE IMPORTED ITEMS IN THE EXPORT PRODUCT.

2. WHAT IS THE REASON FOR ASKING FOR NIL WASTAGE WHEN THE IMPORTED ITEMS ARE IN GRAMS? HOW THE IMPORTED ITEMS IN GRAMS WILL BE ACCOUNTED FOR?

3. IS THERE ANY INDIGENOUS INPUT IN THE EXPORT PRODUCT?

4. ARE THE EXPORT ITEMS FOR DIFFERENT AUTO VEHICLES, OR WILL ALL THE EXPORT PRODUCTS BE USED FOR THE SAME VEHICLES, HAVING DIFFERENT MODELS?

Case No. 13 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ZTT INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00007183AM23 RA File Number 04AX04001128 AM23 Licence No and Date 0411005130/24/03/2023 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM APPLY 00007183AM23 RA File Number 04AX04001128 AM23 Licence No and Date 0411005130/24/03/2023 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

33 comments of Meity dated 07.04.2026, as under:

SL. No. ITEM OF EXPORT QUANTITY EXPORT UOM ITEM OF IMPORT QUANTITY ALLOWED IMPORT UOM 120000 Single Mode Optical Fiber- G652D (Colored) 1,20,060.000 KM 1 Single Mode Optical Fiber- G652D (Colored) / Optical Fibre Cable Unarmoured/ Armoured- 12 F- G 652D- UT 120000 KME OPTICAL FIBER INK 960.003 KGS

Case No. 14 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ANAND SEAMLESS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006032AM26 RA File Number 08AX04001959 AM23 Licence No and Date 0811007810/06/04/2023 comments of DPIIT dated 10 .04.2026, as under: Export item to contain 22.5 MT of Carbon Steel Seamless Tubes / Pipes (Cold Finish) and 22.5 MT of CRSS/HRSS/CRCS/HR CS Strips or Coils.
1. Words " Aluminium Tube" may be omitted from the description of import item at SI.No.2. 2. Quantity of import item at SI.No.1 may be allowed as 25.245 MT as 1.122 Kgs/Kg content in the export item. 3. Quantity of import item at SI.No.2 may be allowed as applied for i.e. 25.31 MT as 1.125 Kgs/Kg content in the export item as per SION C- 1490. 4.

Case No. 15 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

r i.e. 25.31 MT as 1.125 Kgs/Kg content in the export item as per SION C- 1490. 4.

Case No. 15 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

34 Case Status Case Approved Party Name OAM SAAI INTERNATIONAL INC. Meeting Number and Date HQ File Number HQRNORM APPLY 00000881AM24 RA File Number 05AX04000245 AM24 Licence No and Date 0511018850/16/05/2023 comments of Consultant (SKB) dated 06.04.2026, as under:

SL No ITEM OF EXPORT

QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED SEMIFINISHED COMPRESSOR RING FOR PISTON RING VOLVO D-13 QUALITY:DUCTILE MATERIAL, DIA: 131 MM PART NO.20747511 QTY: 2200 NOS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. SEMIFINISHED COMPRESSOR RING FOR PISTON RING VOLVO D-13 QUALITY:DUCTILE MATERIAL, DIA: 131 MM PART NO.20747511 QTY: 2200 NOS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1 PISTON RINGS FOR TRUCK MODEL: VOLVO D-13 WITH 3 RINGS IN ONE SET DIA:131 MM PART NO. 20747511 2200 SETS SEMIFINISHED SPRING OIL RING FOR PISTON RING VOLVO D-13 QUALITY: SPRING STEEL MATERIAL, DIA: 131 MM PART NO.20747511 QTY: 2200 NOS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

RING STEEL MATERIAL, DIA: 131 MM PART NO.20747511 QTY: 2200 NOS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

35 Case No. 16 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name OSWAL PUMPS LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005945AM26 RA File Number 33AX04000024 AM24 Licence No and Date 3311001265/07/06/2023 Case deferred for the comments of TE.

Case No. 17 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name RAGHU VAMSI MACHINE TOOLS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004967AM25 RA File Number 09AX04000204 AM24 Licence No and Date 0911005234/20/06/2023

Case No. 18 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name INTEGRAL COMPONENT MANUFACTURERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003280AM26 RA File Number 04AX04000334 AM24 Licence No and Date 0411005763/21/07/2023

Case No. 19 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005161AM24 RA File Number 06AX04000040 AM24 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005161AM24 RA File Number 06AX04000040 AM24 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

36 Licence No and Date 0611002150/21/08/2023 The Committee considered the case as per agenda and noted that in this case, the firm’s representative Shri Vinod Mishra, Assistant General Manager had attended the Personal Hearing before Norms Committee- 1 on 09.01.2026 and submitted that his firm had imported 667 pcs each of import item Nos.1 & 2 viz., Image Intesifier Tube and Infra Red Aiming Device IRAD against export of 661 pcs of Night Fighting Systems. He claimed 1 % rejection which is due to surface scratches black and white spot and deviation in electrical and mechanical connection. These components are neither repairable nor reusable. Subsequently, the firm submitted, inter alia, Bill of Entry and a copy of Shipping Bill vide mail dated 06.04.2026 which was forwarded to Tech-1 for comments vide mail dated 06.04.2026. The Committee, after deliberating upon the case, decided to ratify the ad-hoc norms as per comments of Tech-1 dated 10.04.2026, as under:

1 % wastage may be allowed on import item nos.1 and 2 which are critical components. i. Import item nos.3 and 4, in respect of which NIL wastage has been claimed, may be allowed on Nett to Nett basis with accountability in export. ii. No repeat authorizations may be issued on these norms. iii.

em nos.3 and 4, in respect of which NIL wastage has been claimed, may be allowed on Nett to Nett basis with accountability in export. ii. No repeat authorizations may be issued on these norms. iii.

Case No. 20 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name NU-WAY HEATRANSFER PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006256AM25 RA File Number 09AX04000520 AM24 Licence No and Date 0911005849/22/09/2023 comments of DPIIT dated 30 .03.2026, as under: Net weight of export item may be specified as 102.106 MT. 1. Import items at Sl.No.1 & 2 shall be of relevant grade and thickness as contained/utilized in the export item and their quantities may be allowed as 1.05 Kgs/Kg content in the export item. 2. Quantity of import items at Sl.No.3 & 4 may be allowed on net to net basis with accountability clause in the export item. 3.

Case No. 21 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

y be allowed on net to net basis with accountability clause in the export item. 3.

Case No. 21 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

37 Case Status Case Deferred Party Name INTEGRAL COMPONENT MANUFACTURERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003282AM26 RA File Number 04AX04000544 AM24 Licence No and Date 0411006069/27/09/2023

Case No. 22 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name HINDUSTHAN ENGINEERING & INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002470AM26 RA File Number 02AX04000557 AM24 Licence No and Date 0211005634/22/12/2023

Case No. 23 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SUPREME SHAVERS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006730AM25 RA File Number 05AX04003268 AM24 Licence No and Date 0511023189/11/01/2024

Submit a colored drawing of the export items ( Knives and Blades) with the complete dimensions of the export product. 1. What are the length and width of the input carbon steel strips for the manufacturing of the export product? 2. Submit separate drawings of the items (Knives and Blades) manufactured from the imported Carbon steel coils of less than 600 MM width coils.
3. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

s of the items (Knives and Blades) manufactured from the imported Carbon steel coils of less than 600 MM width coils.
3. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

38 Submit Test Mill Certificate of Carbon Steel Coils. 4. Submit details of the export product and its application. 5. Complete justification & explanation of the wastage claimed for the export items. 6.

Case No. 24 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000483AM26 RA File Number 03AX04004720 AM24 Licence No and Date 0311030242/17/01/2024 comments of DPIIT dated 08 .04.2026, as under:

Each export item to contain 20.896 MT of Aluminium plates , sheets and strip, 1.05 MT of Hollow Profiles of Aluminium alloys & 0.5 MT of Railing Sections of Aluminium Alloys. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 696.421 MT as 1.0415 Kgs/Kg content in the export item after taking 40 % recovery from scrap. 2. Quantity of import item at Sl.No.2 may be allowed as 34.272 MT as 1.02 Kgs/Kg content in the export item. 3. Quantity of import item at Sl.No.3 may be allowed as 16.32 MT as 1.02 Kgs/Kg content in the export item. 4.

at Sl.No.2 may be allowed as 34.272 MT as 1.02 Kgs/Kg content in the export item. 3. Quantity of import item at Sl.No.3 may be allowed as 16.32 MT as 1.02 Kgs/Kg content in the export item. 4.

Case No. 25 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name M K U LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00008196AM24 RA File Number 06AX04000307 AM24 Licence No and Date 0611002455/29/01/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

39 The Committee considered the case as per agenda and noted that in this case, the firm’s representative Shri Vinod Mishra, Assistant General Manager had attended the Personal Hearing before Norms Committee- 1 on 09.01.2026 and submitted that his firm had imported 52 pcs of import item No.1 viz., Image Intesifier Tube against export of 50 Nos. of Night Vision Binocular with accessories. He claimed 1 % rejection which is due to surface scratches black and white spot and deviation in electrical and mechanical connection. These components are neither repairable nor reusable. Subsequently, the firm submitted, inter alia, Bill of Entry and a copy of Shipping Bill vide mail dated 06.04.2026 which was forwarded to Tech-1 for comments vide mail dated 06.04.2026. The committee further noted that the firm has enclosed a copy of approval for mfg from Ministry of Defense for production and supply to Uruguay Army dated 28.12.2023.

ts vide mail dated 06.04.2026. The committee further noted that the firm has enclosed a copy of approval for mfg from Ministry of Defense for production and supply to Uruguay Army dated 28.12.2023. The Committee, after deliberating upon the case, decided to ratify the ad-hoc norms as per comments of Tech- 1 dated 10.04.2026, as under:

1 % wastage may be allowed on import item no.1 which are critical components. i. No repeat authorizations may be issued on these norms. ii.

Case No. 26 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name HINDUSTHAN ENGINEERING & INDUSTRIES LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002469AM26 RA File Number 02AX04000634 AM24 Licence No and Date 0211005857/30/01/2024

Case No. 27 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002754AM26 RA File Number 02AX04000696 AM24 Licence No and Date 0211006051/27/02/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00002754AM26 RA File Number 02AX04000696 AM24 Licence No and Date 0211006051/27/02/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

40

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated. 2. Starting from the specification of the export product, basic calculation as to how of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc. 3. Use of export product. 4. Net content of import items and wt. of import do not match with % wastage claimed. 5.

g with complete justification and supported by documentary evidence/drawings etc. 3. Use of export product. 4. Net content of import items and wt. of import do not match with % wastage claimed. 5.

Case No. 28 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name MASU BRAKE PADS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003276AM25 RA File Number 05AX04000007 AM25 Licence No and Date 0511024839/03/04/2024

Case No. 29 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ABI FLOW PRODUCTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003643AM26 RA File Number 04AX04001153 AM24 Licence No and Date 0411007238/08/04/2024

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

41

1. What is the actual shape of the imported items? Please submit a copy of the Bill of Entry that explains why the imported raw material is needed for the export product.

2. Submit a process flow chart, which could justify 30% wastage on the net weight of the export product.

3. Submit a drawing of the export product with complete dimensions of the export item and the dimensions & size of the imported input & weight thereof for manufacturing of each export product.

mit a drawing of the export product with complete dimensions of the export item and the dimensions & size of the imported input & weight thereof for manufacturing of each export product.

4. Submit the Mill Test Certificate of the imported input and the grade thereof.

Case No. 30 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000484AM26 RA File Number 03AX04000215 AM25 Licence No and Date 0311033129/17/04/2024 comments of DPIIT dated 08.04.2026, as under: Each export item at Sl.No.1 to contain 20.896 MT of Aluminium plates , sheets and strip, 1.05 MT of Hollow Profiles of Aluminium alloys & 0.5 MT of Railing Sections of Aluminium Alloys. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 348.208 MT as 1.041 Kgs/Kg content in the export item after taking 40 % recovery from scrap. 2. Quantity of import item at Sl.No.2 may be allowed as 17.136 MT as 1.02 Kgs/Kg content in the export item. 3. Quantity of import item at Sl.No.3 may be allowed as 8.16 MT as 1.02 Kgs/Kg content in the export item. 4.

Case No. 31 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ar/202526/20 Case Status Case Deferred Party Name STEAM TURBINE ENGINEERING (INDIA) PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

42 HQ File Number HQRNORM REVIW00004123AM25 RA File Number 34AX04000987 AM24 Licence No and Date 3411004825/22/04/2024

Case No. 32 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name NIRMAL OVERSEAS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004601AM26 RA File Number 05AX04000236 AM25 Licence No and Date 0511025552/15/05/2024 comments of Consultant (SKB) dated 03.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT WASTAGE TO BE ALLOWED SEAMLESS PIPE 1.02 KG/KG ON THE NET WEIGHT OF SEAMLESS TUBES IN THE EXPORT PRODUCT BEARINGS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE LEVELLER NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE CONVEYOR NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE AUTOMATIC STACKER

NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE CUT TO LENGTH MACHINE (MADE BY IMPORT ITEM S.NO1: SEAMLESS PIPE. 2 BEARING, 3 LEVELLERS, 4. CONVEYOR, 5. AUTOMATIC STACKER,

6. HYDRAULIC CUTTING MACHINE,
7. 15 TON CAPACITY HYDRAULIC UNCOILER WITH COIL CAR,
8. ELECTRICAL PANEL WITH 1 1 SET UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

R,

6. HYDRAULIC CUTTING MACHINE,
7. 15 TON CAPACITY HYDRAULIC UNCOILER WITH COIL CAR,
8. ELECTRICAL PANEL WITH 1 1 SET UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

43 HYDRAULIC CUTTING MACHINE NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE 15 TON CAPACITY HYDRAULIC UNCOILER WITH COIL CAR NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE &SOMEINDIGENOUS ITEM. ELECTRICAL PANEL NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE

NOTE: THE SIZE (OD & ID) AND GRADE OF IMPORTED SEAMLESS PIPE SHOULD BE MATCHED WITH THE SIZE (OD & ID) AND GRADE OF SEAMLESS PIPES IN THE EXPORT PRODUCT.

Case No. 33 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM APPLY 00000794AM25 RA File Number 05AX04000308 AM25 Licence No and Date 0511025597/17/05/2024 comments of Consultant (SKB) dated 06.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT AND QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED

1. NUT-U CLIP NQ5(HR227DEYAA04)

QTY: 126883 NOS WASTAGE: NIL QTY: NET TO NET UNDER GN- 4 WITH ACCOUNTABILITY CLAUSE. 2. FLUX - HEADER AND TANK FOR CAC AND CONDE (PAINT FLUX C35M) 1 ACAC ASSY NQ5 INTERCOOLER/ CHARGE AIR COOLER

NQ5(HA600NQ5GA01) 126252 NOS AS APPLIED UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

AC AND CONDE (PAINT FLUX C35M) 1 ACAC ASSY NQ5 INTERCOOLER/ CHARGE AIR COOLER

NQ5(HA600NQ5GA01) 126252 NOS AS APPLIED UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

44 QTY: 564.63 KGS 3. SWITCH ASSY CYCLG PRESS GAMMA 2(PLES715DN8GA01-00)

QTY: 126883 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 4. TUBE GAMMA 2(PLHA722DN8GA01- 01)

QTY: 123711.18 KGS Wastage @0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 5. ISOLATOR - RAD MTG GAMMA 2(PLHR224THFUA01-00)

QTY: 253767 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 6. BOLT GAMMA 2(SA0404901)

QTY: 253767 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 7. BOLT GAMMA CAC(SA1003300-1)

QTY: 380650 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 8. Flux - External Fin (SC-MA-115410-AA) QTY: 3806.50 KGS AS APPLIED 9. INTERNAL FIN COIL GAMMA 2(SC- MA-HA703DN8-AA)

QTY: 67341.77 KGS Wastage @ 0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 10. EXTERNAL FIN COIL GAMMA 2(SC-MA-HA704DN8-AA)

QTY: 78302.20 KGS Wastage @0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

2(SC-MA-HA704DN8-AA)

QTY: 78302.20 KGS Wastage @0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

45 11. BRACKET COIL GAMMA CAC(SC- MA-HA712DN8GA-A)

QTY: 2055.51 KGS WASTAGE @ 0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 12. BRACKET COIL GAMMA CAC(SC- MA-HA712DN8GA-A)

QTY: 1955.91 KGS Wastage @ 0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 13. HEADER COIL GAMMA 2(SC-MA- HA723DN8-AA)

QTY: 41820.721 KGS Wastage @ 10% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 14. SIDE SUPPORT COIL GAMMA 2(SC- MA-HA724DN8-AA)

QTY: 30940.53 KGS Wastage @ 8% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT.

1. FLUX - HEADER AND TANK FOR CAC AND CONDE (PAINT FLUX C35M) QTY: 237.55 KGS AS APPLIED

SWITCH ASSY CYCLG PRESS GAMMA 2(PLES715DN8GA01-00) QTY: 53383 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 3. TUBE GAMMA 2(PLHA722DN8GA01- 01

QTY: 52048.02 KGS WASTAGE @ 0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 4. ISOLATOR - RAD MTG GAMMA 2(PLHR224THFUA01-00)

QTY: 106765 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 2 ACAC ASSY NQ5 WEST EU (INTERCOOLER/ CHARGE AIR COOLER)(HA700NQ5GA02) 53117 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

E: NIL 4 WITH ACCOUNTABILITY CLAUSE. 2 ACAC ASSY NQ5 WEST EU (INTERCOOLER/ CHARGE AIR COOLER)(HA700NQ5GA02) 53117 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

46 5. BOLT GAMMA 2(SA0404901)

QTY: 106765 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 6. BOLT GAMMA CAC(SA1003300-1

QTY: 160148 NOS WASTAGE: NIL 4 WITH ACCOUNTABILITY CLAUSE. 7. Flux - External Fin(SC-MA-115410-AA) QTY: 1601.48 KGS AS APPLIED 8. INTERNAL FIN COIL GAMMA 2(SC- MA-HA703DN8-AA)

QTY: 28332.17 KGS WASTAGE @ 0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 9. EXTERNAL FIN COIL GAMMA 2(SC- MA-HA704DN8-AA)

QTY: 32943.46 KGS WASTAGE @0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 10 BRACKET COIL GAMMA CAC(SC- MA-HA712DN8GA-A)

QTY: 864.80 KGS AS APPLIED 11. HEADER COIL GAMMA 2(SC-MA- HA723DN8-AA)

QTY: 17594.90 KGS WASTAGE @ 15% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 12. SIDE SUPPORT COIL GAMMA 2(SC- MA-HA724DN8-AA)

QTY: 13017.36 KGS WASTAGE @ 12% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

T OF THE IMPORTED ITEM IN THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

47 NOTE: THE GRADE AND SIZE OF THE IMPORTED TUBES SHOULD MATCH THE GRADE AND SIZE OF THE TUBES GOING IN THE EXPORT PRODUCTS.

Case No. 34 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HARDCARB TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00004715AM26 RA File Number 03AX04001011 AM25 Licence No and Date 0311034459/07/06/2024 The Committee considered the case as per agenda and noted that this case has already been approved in NC-1 meeting dated 03.04.2025 and as per the decision taken therein, the copy of written recommendation of MHI has already been forwarded to the concerned RA and the firm. The committee, therefore, decided to close the case showing its status as approved.

Case No. 35 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001655AM25 RA File Number 24AX04000123 AM25 Licence No and Date 2411003661/01/07/2024

Case No. 36 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM REVIW00000404AM26 RA File Number 03AX04001672 AM25 Licence No and Date 0311035212/04/07/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00000404AM26 RA File Number 03AX04001672 AM25 Licence No and Date 0311035212/04/07/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

48 comments of DPIIT dated 08 .04.2026, as under: Quantity of export item at Sl.No.1 [Pre-Fabricated Aluminium Silos(400 Cubic meters)] may be specified as under: 1. a) Type A - Quantity: 4 Nos.-Each Silo to contain 11.414 MT of Aluminium plates , sheets and strip. b) Type B - Quantity: 2 Nos.-Each Silo to contain 9.663 MT of Aluminium plates , sheets and strip. c) Type C -Quantity: 1 No.-Each Silo to contain 12.677 MT of Aluminium plates , sheets and strip. 2. Export item at Sl.No.2 to contain 6324 MT of Aluminium plates , sheets and strip. 3. Export item at Sl.No.3 to contain 1.666 MT of Aluminium plates , sheets and strip 4. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.1 and its quantity may be allowed as 81.954 MT as 1.055 Kgs/Kg content in the export item after taking 40% recovery from scrap. 5. Import item at Sl.No.2 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.2 and its quantity may be allowed as applied for i.e 6.216 MT, being less than the net content in the export item. 6. Import item at Sl.No.3 shall be of relevant grade and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 1.760 MT as 1.056 Kgs/Kg content in the export item after taking 40% recovery from scrap.

de and thickness as contained/utilized in the export item at SI.No.3 and its quantity may be allowed as 1.760 MT as 1.056 Kgs/Kg content in the export item after taking 40% recovery from scrap.

Case No. 37 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PARKER HANNIFIN INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001650AM26 RA File Number 04AX04000253 AM25 Licence No and Date 0411007732/04/07/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

49

1. SUBMIT A COLOURED DRAWING OF EACH EXPORT PRODUCT AND ALSO INDICATE THE POSITION OF THE IMPORTED ITEMS IN THE EXPORT PRODUCT.

2. WHAT IS THE REASON FOR ASKING FOR NIL WASTAGE WHEN THE IMPORTED ITEMS ARE IN GRAMS? HOW THE IMPORTED ITEMS IN GRAMS WILL BE ACCOUNTED FOR?

3. IS THERE ANY INDIGENOUS INPUT IN THE EXPORT PRODUCT?

4. ARE THE EXPORT ITEMS FOR DIFFERENT AUTO VEHICLES, OR WILL ALL THE EXPORT PRODUCTS BE USED FOR THE SAME VEHICLES, HAVING DIFFERENT MODELS?

Case No. 38 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name INTEGRAL COMPONENT MANUFACTURERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003281AM26 RA File Number 04AX04000272 AM25 Licence No and Date 0411007759/09/07/2024

Case No. 39 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name PITTI ENGINEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM REVIW00005864AM26 RA File Number 09AX04000289 AM25 Licence No and Date 0911007572/11/07/2024

NEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM REVIW00005864AM26 RA File Number 09AX04000289 AM25 Licence No and Date 0911007572/11/07/2024 comments of Consultant (SKB) dated 06.04.2026, as under:

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

50 SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 FLYWHEEL FLANGE ASSEMBLY (PARTS OF LOCOMOTIVES OTHERS) 500 NOS HOT ROLLED BALL BEARING TUBES.

QTY: 13070.00 KGS 12596.78 KGS INCLUSIVE OF 403.87% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ITEM OF THE EXPORT PRODUCT. NOTE: THE GRADE OF THE IMPORTED ITEM SHOULD BE MATCHED WITH THE GRADE OF THE SLEEVE TO BE MANUFACTURED AS A PART FOR THE EXPORT OF FLYWHEEL FLANGE ASSEMBLY.

Case No. 40 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ASHOKA FOUNDRY AND EQUIPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002699AM26 RA File Number 02AX04000221 AM25 Licence No and Date 0211006958/23/07/2024 comments of Consultant (SKB) dated 09.04.2026, as under:

EXPORT ITEM: COPPER TUYERE AND COPPER TUYERE COOLER (MECHANICAL SPARE ITEM OF STEEL PLANT - BLAST FURNACE) QTY: 22.00 MTS ITEM OF IMPORT: COPPER CAKES (C1030 X 205 X 2000 MM OF02) QTY: 23.50 MTS QUANTITY TO BE ALLOWED: 23.42 MTS INCLUSIVE OF 5.73% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

M OF02) QTY: 23.50 MTS QUANTITY TO BE ALLOWED: 23.42 MTS INCLUSIVE OF 5.73% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

51 NOTE: THE GRADE AND NET CONTENT OF COPPER IN THE IMPORTED COPPER CAKES SHOULD BE MATCHED WITH THE GRADE AND NET CONTENT OF COPPER IN THE EXPORT PRODUCT.

Case No. 41 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name OMNITECH ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00001022AM26 RA File Number 24AX04000165 AM25 Licence No and Date 2411003733/30/07/2024 comments of DPIIT dated 09.04.2026, as under:

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 797.59 Kgs. as 2.71 Kgs./Kg content in the export item at SI.No.1 after taking 5 % recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 539.93 Kgs. as 2.28 Kgs./Kg content in the export item at SI.No.2 after taking 5 % recovery from the scrap.

3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 5359.2 Kgs as 2.57 Kgs./Kg content in the export item at SI.No.3 after taking 5 % recovery from the scrap.

ntained / utilized in the export item at SI.No.3 and its quantity may be allowed as 5359.2 Kgs as 2.57 Kgs./Kg content in the export item at SI.No.3 after taking 5 % recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 188.54 Kgs as 8.16 Kgs./Kg content in the export item at SI.No.4 after taking 5 % recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 392.73 Kgs as 6.11 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

52 SI.No.6 and its quantity may be allowed as 3874.39 Kgs. as 2.65 Kgs./Kg content in the export item at SI.No.6 after taking 5% recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 4306.57 Kgs as 1.89 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

tained / utilized in the export item at SI.No.7 and its quantity may be allowed as 4306.57 Kgs as 1.89 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 282.94 Kgs as 5.71 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

9. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 2304.09 Kgs as 1.80 Kgs./Kg content in the export item at SI.No.9 after taking 5% recovery from the scrap.

10. Import item at SI No10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 1496.98 Kgs as 2.03 Kgs./Kg content in the export item at SI.No.10 after taking 5% recovery from the scrap.

11. Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 1021.33 Kgs as 2.99 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.11 and its quantity may be allowed as 1021.33 Kgs as 2.99 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

12. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 427.96 Kgs as 6.85 Kgs./Kg content in the export item at SI.No.12 after taking 5% recovery from the scrap.

13.Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 428.025 Kgs as 6.71 Kgs./Kg content in the export item at SI.No.13 after taking 5% recovery from the scrap.

14.Import item at SI No.14 shall be of relevant grade and size as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 154.665 Kgs as 5.40 Kgs./Kg content in the export item at SI.No.14 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be allowed as 154.665 Kgs as 5.40 Kgs./Kg content in the export item at SI.No.14 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

53

15. Import item at SI No.15 shall be of relevant grade and size as contained / utilized in the export item at SI.No. 15 and its quantity may be allowed as 1248.99 Kgs as 2.47 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.

16. Import item at SI No.16 shall be of relevant grade and size as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 4278.52 Kgs as 2.01 Kgs./Kg content in the export item at SI.No.16 after taking 5% recovery from the scrap.

17. Import item at SI No.17 shall be of relevant grade and size as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 6291.631 Kgs as 2.01 Kgs./Kg content in the export item at SI.No.17 after taking 5% recovery from the scrap.

18. Import item at SI No.18 shall be of relevant grade and size as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 7456.89 Kgs as 2.64 Kgs./Kg content in the export item at SI.No.18 after taking 5% recovery from the scrap.

19 . Import item at SI No.19 shall be of relevant grade and size as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 3984.18 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.19 and its quantity may be allowed as 3984.18 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap.

20. Import item at SI No.20 shall be of relevant grade and size as contained / utilized in the export item at SI.No.20 and its quantity may be allowed as 1280.37 Kgs as 1.48 Kgs./Kg content in the export item at SI.No.20 after taking 5% recovery from the scrap.

21. Import item at SI No.21 shall be of relevant grade and size as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 2979.55 Kgs as 2.35 Kgs./Kg content in the export item at SI.No.21 after taking 5% recovery from the scrap.

22. Import item at SI No. 22 shall be of relevant grade and size as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 4578.14 Kgs as 2.04 Kgs./Kg content in the export item at SI.No.22 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

allowed as 4578.14 Kgs as 2.04 Kgs./Kg content in the export item at SI.No.22 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

54 23. Import item at SI No.23 shall be of relevant grade and size as contained / utilized in the export item at SI.No.23 and its quantity may be allowed as 4415.02 Kgs as 3.006 Kgs./Kg content in the export item at SI.No.23 after taking 5% recovery from the scrap.

24. Import item at SI No.24 shall be of relevant grade and size as contained / utilized in the export item at SI.No.24 and its quantity may be allowed as 13642.52 Kgs as 2.89 Kgs./Kg content in the export item at SI.No.24 after taking 5% recovery from the scrap.

25. Import item at SI No.25 shall be of relevant grade and size as contained / utilized in the export item at SI.No.25 and its quantity may be allowed as 29360.87 Kgs as 2.88 Kgs./Kg content in the export item at SI.No.25 after taking 5% recovery from the scrap.

26. Import item at SI No.26 shall be of relevant grade and size as contained / utilized in the export item at SI.No.26 and its quantity may be allowed as 1069.32 Kgs as 1.92 Kgs./Kg content in the export item at SI.No.26 after taking 5% recovery from the scrap.

27. Import item at SI No.27 shall be of relevant grade and size as contained / utilized in the export item at SI.No.27 and its quantity may be allowed as 6250.97 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

ed / utilized in the export item at SI.No.27 and its quantity may be allowed as 6250.97 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

28. Import item at SI No.28 shall be of relevant grade and size as contained / utilized in the export item at SI.No.28 and its quantity may be allowed as 25962.001 Kgs as 1.66 Kgs./Kg content in the export item at SI.No.28 after taking 5% recovery from the scrap.

29. Import item at SI No.29 shall be of relevant grade and size as contained / utilized in the export item at SI.No.29 and its quantity may be allowed as 4047.42 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.29 after taking 5% recovery from the scrap.

30. Import item at SI No.30 shall be of relevant grade and size as contained / utilized in the export item at SI.No.30 and its quantity may be allowed as 2124.30 Kgs as 8.01 Kgs./Kg content in the export item at SI.No.30 after taking 5% recovery from the scrap.

31.Import item at SI No.31 shall be of relevant grade and size as contained / utilized in the export item at SI.No.31 and its quantity may be allowed as 4730.88 Kgs as 4.68 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

the export item at SI.No.31 and its quantity may be allowed as 4730.88 Kgs as 4.68 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

55 SI.No.31 after taking 5% recovery from the scrap.

32. Import item at SI No.32 shall be of relevant grade and size as contained / utilized in the export item at SI.No.32 and its quantity may be allowed as 18073.38 Kgs as 2.12 Kgs./Kg content in the export item at SI.No.32 after taking 5% recovery from the scrap.

33. Import item at SI No.33 shall be of relevant grade and size as contained / utilized in the export item at SI.No.33 and its quantity may be allowed as 17823.39 Kgs as 2.66 Kgs./Kg content in the export item at SI.No.33 after taking 5% recovery from the scrap..

34. Import item at SI No.34 shall be of relevant grade and size as contained / utilized in the export item at SI.No.34 and its quantity may be allowed as 22905.41 Kgs as 1.70 Kgs./Kg content in the export item at SI.No.34 after taking 5% recovery from the scrap.

35. Import item at SI No.35 shall be of relevant grade and size as contained / utilized in the export item at SI.No.35 and its quantity may be allowed as 27295.19 Kgs as 2.51 Kgs./Kg content in the export item at SI.No.35 after taking 5% recovery from the scrap.

d / utilized in the export item at SI.No.35 and its quantity may be allowed as 27295.19 Kgs as 2.51 Kgs./Kg content in the export item at SI.No.35 after taking 5% recovery from the scrap.

36. Import item at SI No.36 shall be of relevant grade and size as contained / utilized in the export item at SI.No.36 and its quantity may be allowed as 6688.6 Kgs as 3.43 Kgs./Kg content in the export item at SI.No.36 after taking 5% recovery from the scrap.

37. Import item at SI No.37 shall be of relevant grade and size as contained / utilized in the export item at SI.No.37 and its quantity may be allowed as 1263.89 Kgs as 3.70 Kgs./Kg content in the export item at SI.No.37 after taking 5% recovery from the scrap.

38. Import item at SI No.38 shall be of relevant grade and size as contained / utilized in the export item at SI.No.38 and its quantity may be allowed as 5298.55 Kgs as 3.14 Kgs./Kg content in the export item at SI.No.38 after taking 5% recovery from the scrap.

39. Import item at SI No.39 shall be of relevant grade and size as contained / utilized in the export item at SI.No.39 and its quantity may be allowed as 3957.04 Kgs as 2.28 Kgs./Kg content in the export item at SI.No.39 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be allowed as 3957.04 Kgs as 2.28 Kgs./Kg content in the export item at SI.No.39 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

56

40. Import item at SI No.40 shall be of relevant grade and size as contained / utilized in the export item at SI.No.40 and its quantity may be allowed as 12624.006 Kgs as 1.59 Kgs./Kg content in the export item at SI.No.40 after taking 5% recovery from the scrap.

41. Import item at SI No.41 shall be of relevant grade and size as contained / utilized in the export item at SI.No.41 and its quantity may be allowed as 6325.26 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.41 after taking 5% recovery from the scrap.

Case No. 42 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name LOHUM CLEANTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002136AM26 RA File Number 05AX04001471 AM25 Licence No and Date 0511027174/14/08/2024

Case No. 43 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002380AM26 RA File Number 08AX04000803 AM25 Licence No and Date 0811012440/20/08/2024 comments of DPIIT dated 23.03.2026, as under: Net weight of export item may be specified as 15,604 Kgs. 1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 1406 Kgs as 1.02 Kgs/Kg content in the export item. 2.

Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 1406 Kgs as 1.02 Kgs/Kg content in the export item. 2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item 3. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

57 and its quantity may be allowed as 550 Kgs as 1.02 Kgs/Kg content in the export item. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 505 Kgs as 1.02 Kgs/Kg content in the export item. 4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 1568 Kgs as 1.02 Kgs/Kg content in the export item. 5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 138 Kgs as 1.02 Kgs/Kg content in the export item. 6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 230 Kgs as 1.02 Kgs/Kg content in the export item. 7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 979 Kgs as 1.02 Kgs/Kg content in the export item. 8.

Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 979 Kgs as 1.02 Kgs/Kg content in the export item. 8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 436 Kgs as 1.02 Kgs/Kg content in the export item. 9. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item and its quantity may be allowed as 350 Kgs as 1.02 Kgs/Kg content in the export item. 10.

Case No. 44 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00000610AM26 RA File Number 24AX04000219 AM25 Licence No and Date 2411003800/23/08/2024 comments of DPIIT dated 09 .04.2026, as under:

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 3045.67 Kgs. as 2.;16 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 3931.39 Kgs. as 1.52 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

e allowed as 3931.39 Kgs. as 1.52 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

58 3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 3784 Kgs as 3.42 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 4399.20 Kgs as 2.44 Kgs./Kg content in the export item at SI.No.4 after taking 5% recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 3874.39 Kgs as 2.65 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 3854.88 Kgs. as 7.87 Kgs./Kg content in the export item at SI.No.6 after taking 5% recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 7628.79 Kgs as 1.83 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

ntained / utilized in the export item at SI.No.7 and its quantity may be allowed as 7628.79 Kgs as 1.83 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 4671.11 Kgs as 2.04 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

9. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 16517.10 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.9 after taking 5% recovery from the scrap.

10. Import item at SI No10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 3515.40 Kgs as 2.87 Kgs./Kg content in the export item at SI.No.10 after taking 5% recovery from the scrap.

11. Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 13964.64 Kgs as 2.01 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

he export item at SI.No.11 and its quantity may be allowed as 13964.64 Kgs as 2.01 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

59 SI.No.11 after taking 5% recovery from the scrap.

12. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 4120.25 Kgs as 2.53 Kgs./Kg content in the export item at SI.No.12 after taking 5% recovery from the scrap.

13.Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 6548.14 Kgs as 2.33 Kgs./Kg content in the export item at SI.No.13 after taking 5% recovery from the scrap.

14.Import item at SI No.14 shall be of relevant grade and size as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 3716.53 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.14 after taking 5% recovery from the scrap.

15. Import item at SI No.15 shall be of relevant grade and size as contained / utilized in the export item at SI.No. 15 and its quantity may be allowed as 11364.85 Kgs as 2.03 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.

ed / utilized in the export item at SI.No. 15 and its quantity may be allowed as 11364.85 Kgs as 2.03 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.

16. Import item at SI No.16 shall be of relevant grade and size as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 4056.57 Kgs as 1.87 Kgs./Kg content in the export item at SI.No.16 after taking 5% recovery from the scrap.

17. Import item at SI No.17 shall be of relevant grade and size as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 7032.66 Kgs as 1.87 Kgs./Kg content in the export item at SI.No.17 after taking 5% recovery from the scrap.

18. Import item at SI No.18shall be of relevant grade and size as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 23952.35 Kgs as 2.83 Kgs./Kg content in the export item at SI.No.18 after taking 5% recovery from the scrap.

19. Import item at SI No.19 shall be of relevant grade and size as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 3486.16 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be allowed as 3486.16 Kgs as 2.43 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

60

20. Import item at SI No.20 shall be of relevant grade and size as contained / utilized in the export item at SI.No.20 and its quantity may be allowed as 7564.88 Kgs as 2.91 Kgs./Kg content in the export item at SI.No.20 after taking 5% recovery from the scrap.

21. Import item at SI No.21 shall be of relevant grade and size as contained / utilized in the export item at SI.No.21 and its quantity may be allowed as 14778.38 Kgs as 4.65 Kgs./Kg content in the export item at SI.No.21 after taking 5% recovery from the scrap.

22. Import item at SI No. 22 shall be of relevant grade and size as contained / utilized in the export item at SI.No.22 and its quantity may be allowed as 9961.52 Kgs as 2.15 Kgs./Kg content in the export item at SI.No.22 after taking 5% recovery from the scrap.

23. Import item at SI No.23 shall be of relevant grade and size as contained / utilized in the export item at SI.No.23 and its quantity may be allowed as 15035.25 Kgs as 2.92 Kgs./Kg content in the export item at SI.No.23 after taking 5% recovery from the scrap.

24. Import item at SI No.24 shall be of relevant grade and size as contained / utilized in the export item at SI.No.24 and its quantity may be allowed as 18533.84 Kgs as 2.89 Kgs./Kg content in the export item at SI.No.24 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.24 and its quantity may be allowed as 18533.84 Kgs as 2.89 Kgs./Kg content in the export item at SI.No.24 after taking 5% recovery from the scrap.

25. Import item at SI No.25 shall be of relevant grade and size as contained / utilized in the export item at SI.No.25 and its quantity may be allowed as 89691.61 Kgs as 1.22 Kgs./Kg content in the export item at SI.No.25 after taking 5% recovery from the scrap.

26. Import item at SI No.26 shall be of relevant grade and size as contained / utilized in the export item at SI.No.26 and its quantity may be allowed as 71308.39 Kgs as 4.36 Kgs./Kg content in the export item at SI.No.26 after taking 5% recovery from the scrap.

27. Import item at SI No.27 shall be of relevant grade and size as contained / utilized in the export item at SI.No.27 and its quantity may be allowed as 5950.68 Kgs as 3.006 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

lowed as 5950.68 Kgs as 3.006 Kgs./Kg content in the export item at SI.No.27 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

61 28. Import item at SI No.28 shall be of relevant grade and size as contained / utilized in the export item at SI.No.28 and its quantity may be allowed as 14437.78 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.28 after taking 5% recovery from the scrap.

29. Import item at SI No.29 shall be of relevant grade and size as contained / utilized in the export item at SI.No.29 and its quantity may be allowed as 23044.81 Kgs as 2.89 Kgs./Kg content in the export item at SI.No.29 after taking 5% recovery from the scrap.

30. Import item at SI No.30 shall be of relevant grade and size as contained / utilized in the export item at SI.No.30 and its quantity may be allowed as 62458.58 Kgs as 2.88 Kgs./Kg content in the export item at SI.No.30 after taking 5% recovery from the scrap.

31.Import item at SI No.31 shall be of relevant grade and size as contained / utilized in the export item at SI.No.31 and its quantity may be allowed as 9342.48 Kgs as 1.92 Kgs./Kg content in the export item at SI.No.31 after taking 5% recovery from the scrap.

32. Import item at SI No.32 shall be of relevant grade and size as contained / utilized in the export item at SI.No.32 and its quantity may be allowed as 16185.55 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.32 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.32 and its quantity may be allowed as 16185.55 Kgs as 3.35 Kgs./Kg content in the export item at SI.No.32 after taking 5% recovery from the scrap.

33. Import item at SI No.33 shall be of relevant grade and size as contained / utilized in the export item at SI.No.33 and its quantity may be allowed as 18300.87 Kgs as 1.43 Kgs./Kg content in the export item at SI.No.33 after taking 5% recovery from the scrap.

34. Import item at SI No.34 shall be of relevant grade and size as contained / utilized in the export item at SI.No.34 and its quantity may be allowed as 55058.66 Kgs as 2.11 Kgs./Kg content in the export item at SI.No.34 after taking 5% recovery from the scrap.

35. Import item at SI No.35 shall be of relevant grade and size as contained / utilized in the export item at SI.No.35 and its quantity may be allowed as 21305.13 Kgs as 1.65 Kgs./Kg content in the export item at SI.No.35 after taking 5% recovery from the scrap.

36. Import item at SI No.36 shall be of relevant grade and size as contained / utilized in the export item at SI.No.36 and its quantity may be allowed as 7783.71 Kgs as 2.86 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

the export item at SI.No.36 and its quantity may be allowed as 7783.71 Kgs as 2.86 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

62 SI.No.36 after taking 5% recovery from the scrap.

37. Import item at SI No.37 shall be of relevant grade and size as contained / utilized in the export item at SI.No.37 and its quantity may be allowed as 9036.72 Kgs as 2.12 Kgs./Kg content in the export item at SI.No.37 after taking 5% recovery from the scrap.

38. Import item at SI No.38 shall be of relevant grade and size as contained / utilized in the export item at SI.No.38 and its quantity may be allowed as 23195.68 Kgs as 4.71 Kgs./Kg content in the export item at SI.No.38 after taking 5% recovery from the scrap.

39. Import item at SI No.39 shall be of relevant grade and size as contained / utilized in the export item at SI.No.39 and its quantity may be allowed as 14281.56 Kgs as 2.66 Kgs./Kg content in the export item at SI.No.39 after taking 5% recovery from the scrap.

40. Import item at SI No.40 shall be of relevant grade and size as contained / utilized in the export item at SI.No.40 and its quantity may be allowed as 3959.66 Kgs as 4.03 Kgs./Kg content in the export item at SI.No.40 after taking 5% recovery from the scrap.

ined / utilized in the export item at SI.No.40 and its quantity may be allowed as 3959.66 Kgs as 4.03 Kgs./Kg content in the export item at SI.No.40 after taking 5% recovery from the scrap.

41. Import item at SI No.41 shall be of relevant grade and size as contained / utilized in the export item at SI.No.41 and its quantity may be allowed as 3406.50 Kgs as 3.91 Kgs./Kg content in the export item at SI.No.41 after taking 5% recovery from the scrap.

42. Import item at SI No.42 shall be of relevant grade and size as contained / utilized in the export item at SI.No.42 and its quantity may be allowed as 3568.08 Kgs as 2.85 Kgs./Kg content in the export item at SI.No.42 after taking 5% recovery from the scrap.

43. Import item at SI No.43 shall be of relevant grade and size as contained / utilized in the export item at SI.No.43 and its quantity may be allowed as 9631.58 Kgs as 3.43 Kgs./Kg content in the export item at SI.No.43 after taking 5% recovery from the scrap.

44. Import item at SI No.44 shall be of relevant grade and size as contained / utilized in the export item at SI.No.44 and its quantity may be allowed as 3432.35 Kgs as 7.28 Kgs./Kg content in the export item at SI.No.44 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be allowed as 3432.35 Kgs as 7.28 Kgs./Kg content in the export item at SI.No.44 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

63

45. Import item at SI No.45 shall be of relevant grade and size as contained / utilized in the export item at SI.No.45 and its quantity may be allowed as 11476.28 Kgs as 3.13 Kgs./Kg content in the export item at SI.No.45 after taking 5% recovery from the scrap.

46. Import item at SI No.46 shall be of relevant grade and size as contained / utilized in the export item at SI.No.46 and its quantity may be allowed as 13405.98 Kgs as 3.14 Kgs./Kg content in the export item at SI.No.46 after taking 5% recovery from the scrap.

47. Import item at SI No.47 shall be of relevant grade and size as contained / utilized in the export item at SI.No.47 and its quantity may be allowed as 52839.73 Kgs as 1.76 Kgs./Kg content in the export item at SI.No.47 after taking 5% recovery from the scrap.

48. Import item at SI No.48 shall be of relevant grade and size as contained / utilized in the export item at SI.No.48 and its quantity may be allowed as 14726.63 Kgs as 3.13 Kgs./Kg content in the export item at SI.No.48 after taking 5% recovery from the scrap.

49. Import item at SI No.49 shall be of relevant grade and size as contained / utilized in the export item at SI.No.49 and its quantity may be allowed as 17734.95 Kgs as 2.59 Kgs./Kg content in the export item at SI.No.49 after taking 5% recovery from the scrap.

ned / utilized in the export item at SI.No.49 and its quantity may be allowed as 17734.95 Kgs as 2.59 Kgs./Kg content in the export item at SI.No.49 after taking 5% recovery from the scrap.

50. Import item at SI No.50 shall be of relevant grade and size as contained / utilized in the export item at SI.No.50 and its quantity may be allowed as 7620.03 Kgs as 3.29 Kgs./Kg content in the export item at SI.No.50 after taking 5% recovery from the scrap.

51. Import item at SI No.51 shall be of relevant grade and size as contained / utilized in the export item at SI.No.51 and its quantity may be allowed as 3703.05 Kgs as 2.37 Kgs./Kg content in the export item at SI.No.51 after taking 5% recovery from the scrap.

52. Import item at SI No.52 shall be of relevant grade and size as contained / utilized in the export item at SI.No.52 and its quantity may be allowed as 11026.23 Kgs as 2.21 Kgs./Kg content in the export item at SI.No.52 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

allowed as 11026.23 Kgs as 2.21 Kgs./Kg content in the export item at SI.No.52 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

64 53. Import item at SI No.53 shall be of relevant grade and size as contained / utilized in the export item at SI.No.53 and its quantity may be allowed as 3663 Kgs as 2.67 Kgs./Kg content in the export item at SI.No.53 after taking 5% recovery from the scrap.

54. Import item at SI No.54 shall be of relevant grade and size as contained / utilized in the export item at SI.No.54 and its quantity may be allowed as 3847.05 Kgs as 4.87 Kgs./Kg content in the export item at SI.No.54 after taking 5% recovery from the scrap.

55. Import item at SI No.55 shall be of relevant grade and size as contained / utilized in the export item at SI.No.55 and its quantity may be allowed as 21457.46 Kgs as 2.09 Kgs./Kg content in the export item at SI.No.55 after taking 5% recovery from the scrap.

56. Import item at SI No.56 shall be of relevant grade and size as contained / utilized in the export item at SI.No.56 and its quantity may be allowed as 16531.70 Kgs as 1.37 Kgs./Kg content in the export item at SI.No.56 after taking 5% recovery from the scrap.

57. Import item at SI No.57 shall be of relevant grade and size as contained / utilized in the export item at SI.No.57 and its quantity may be allowed as 26876.92 Kgs as 1.59 Kgs./Kg content in the export item at SI.No.57 after taking 5% recovery from the scrap.

d / utilized in the export item at SI.No.57 and its quantity may be allowed as 26876.92 Kgs as 1.59 Kgs./Kg content in the export item at SI.No.57 after taking 5% recovery from the scrap.

58. Import item at SI No.58 shall be of relevant grade and size as contained / utilized in the export item at SI.No.58 and its quantity may be allowed as 15105.12 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.58 after taking 5% recovery from the scrap.

59. Import item at SI No.59 shall be of relevant grade and size as contained / utilized in the export item at SI.No.59 and its quantity may be allowed as 28495 Kgs as 1.31 Kgs./Kg content in the export item at SI.No.59 after taking 5% recovery from the scrap.

60. Import item at SI No.60 shall be of relevant grade and size as contained / utilized in the export item at SI.No.60 and its quantity may be allowed as 39765.47 Kgs as 2.55 Kgs./Kg content in the export item at SI.No.60 after taking 5% recovery from the scrap.

61. Import item at SI No.61 shall be of relevant grade and size as contained / utilized in the export item at SI.No.61 and its quantity may be allowed as 10017.19 Kgs as 2.60 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

he export item at SI.No.61 and its quantity may be allowed as 10017.19 Kgs as 2.60 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

65 SI.No.61 after taking 5% recovery from the scrap.

62. Import item at SI No.62 shall be of relevant grade and size as contained / utilized in the export item at SI.No.62 and its quantity may be allowed as 26346.58 Kgs as 1.65 Kgs./Kg content in the export item at SI.No.62 after taking 5% recovery from the scrap.

63. Import item at SI No.63 shall be of relevant grade and size as contained / utilized in the export item at SI.No.63 and its quantity may be allowed as 2805 Kgs as 4.52 Kgs./Kg content in the export item at SI.No.63 after taking 5% recovery from the scrap.

64 . Import item at SI No.64 shall be of relevant grade and size as contained / utilized in the export item at SI.No.64 and its quantity may be allowed as 2823 Kgs as 7.58 Kgs./Kg content in the export item at SI.No.64 after taking 5% recovery from the scrap.

Case No. 45 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name LARSEN AND TOUBRO LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00005553AM26 RA File Number 03AX04002526 AM25 Licence No and Date 0311036626/26/08/2024

Case No. 46 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name PITTI ENGINEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM REVIW00005860AM26 RA File Number 09AX04000438 AM25 Licence No and Date 0911007839/30/08/2024

NEERING LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM REVIW00005860AM26 RA File Number 09AX04000438 AM25 Licence No and Date 0911007839/30/08/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

66 comments of Consultant (SKB) dated 06.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 FLYWHEEL FLANGE ASSEMBLY (PARTS OF LOCOMOTIVES OTHERS) 500 NOS HOT ROLLED BALL BEARING TUBES.

QTY: 13070.00 KGS 12596.78 KGS INCLUSIVE OF 403.87% WASTAGE ON THE NET WEIGHT OF THE IMPORTED ITEM OF THE EXPORT PRODUCT.

NOTE: THE GRADE OF THE IMPORTED ITEM SHOULD BE MATCHED WITH THE GRADE OF THE SLEEVE TO BE MANUFACTURED AS A PART FOR THE EXPORT OF FLYWHEEL FLANGE ASSEMBLY.

Case No. 47 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PMEA SOLAR TECH SOLUTIONS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002833AM25 RA File Number 03AX04002559 AM25 Licence No and Date 0311036863/03/09/2024

Case No. 48 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name INDUSTRIAL JEWELS PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

48 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name INDUSTRIAL JEWELS PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

67 HQ File Number HQRNORM REVIW00003607AM26 RA File Number 03AX04002730 AM25 Licence No and Date 0311037071/11/09/2024

Case No. 49 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001023AM26 RA File Number 24AX04000256 AM25 Licence No and Date 2411003884/18/09/2024 comments of DPIIT dated 09.04.2026, as under:

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 8473.10 Kgs. as 2.35 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 4292.01 Kgs. as 2.04 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.

3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 30148.44 Kgs as 1.22 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

ntained / utilized in the export item at SI.No.3 and its quantity may be allowed as 30148.44 Kgs as 1.22 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 34966.12 Kgs as 2.88 Kgs./Kg content in the export item at SI.No.4 after taking 5% recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

68 SI.No.5 and its quantity may be allowed as 1688.4 Kgs as 1.92 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 10157.82 Kgs. as 3.35 Kgs./Kg content in the export item at SI.No.6 after taking 20% recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 4802.28 Kgs as 8.01 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

ntained / utilized in the export item at SI.No.7 and its quantity may be allowed as 4802.28 Kgs as 8.01 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 14618.41 Kgs as 3.11 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

9. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 4331.12 Kgs as 1.76 Kgs./Kg content in the export item at SI.No.9 after taking 5% recovery from the scrap.

10. Import item at SI No10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 10635.89 Kgs as 3.13 Kgs./Kg content in the export item at SI.No.10 after taking 5% recovery from the scrap.

11. Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 4893.93 Kgs as 5.55 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

ined / utilized in the export item at SI.No.11 and its quantity may be allowed as 4893.93 Kgs as 5.55 Kgs./Kg content in the export item at SI.No.11 after taking 5% recovery from the scrap.

12. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 17327.25 Kgs as 2.59 Kgs./Kg content in the export item at SI.No.12 after taking 5% recovery from the scrap.

13.Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 1598.95 Kgs as 3.29 Kgs./Kg content in the export item at SI.No.13 after taking 5% recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

69

14.Import item at SI No.14 shall be of relevant grade and size as contained / utilized in the export item at SI.No.14 and its quantity may be allowed as 1395.72 Kgs as 2.21 Kgs./Kg content in the export item at SI.No.14 after taking 5% recovery from the scrap.

15. Import item at SI No.15 shall be of relevant grade and size as contained / utilized in the export item at SI.No. 15 and its quantity may be allowed as 10272.32 Kgs as 3.25 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.

ed / utilized in the export item at SI.No. 15 and its quantity may be allowed as 10272.32 Kgs as 3.25 Kgs./Kg content in the export item at SI.No.15 after taking 5% recovery from the scrap.

16. Import item at SI No.16 shall be of relevant grade and size as contained / utilized in the export item at SI.No.16 and its quantity may be allowed as 2136.75 Kgs as 2.67 Kgs./Kg content in the export item at SI.No.16 after taking 5% recovery from the scrap.

17. Import item at SI No.17 shall be of relevant grade and size as contained / utilized in the export item at SI.No.17 and its quantity may be allowed as 4103.52 Kgs as 4.87 Kgs./Kg content in the export item at SI.No.17 after taking 5% recovery from the scrap.

18. Import item at SI No.18 shall be of relevant grade and size as contained / utilized in the export item at SI.No.18 and its quantity may be allowed as 5192.38 Kgs as 2.96 Kgs./Kg content in the export item at SI.No.18 after taking 5% recovery from the scrap.

19. Import item at SI No.19 shall be of relevant grade and size as contained / utilized in the export item at SI.No.19 and its quantity may be allowed as 5433.79 Kgs as 2.55 Kgs./Kg content in the export item at SI.No.19 after taking 5% recovery from the scrap.

Case No. 50 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name RIBO INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000176AM26 RA File Number 04AX04000560 AM25 Licence No and Date 0411008277/24/09/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

nd Date HQ File Number HQRNORM REVIW00000176AM26 RA File Number 04AX04000560 AM25 Licence No and Date 0411008277/24/09/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

70

1. THE MATERIAL BALANCE OF IMPORT AND EXPORT QUANTITY IS NOT MATCHING WITH 2% WASTAGE AS GIVEN IN APPENDIX 4E.

2. SUBMIT THE EXCEL SHEET, WHICH COULD INDICATE DESCRIPTION OF THE EXPORT PRODUCT, EXPORT WEIGHT, QUANTITY IN MTS AND ALSO IN NUMBERS, DESCRIPTION OF THE IMPORT ITEMS, SIZE OF THE PIPES, AND WHETHER THE PIPE IS SEAMLESS OR ERW, QUANTITY OF IMPORT ITEMS INCLUDING WASTAGE CLAIMED ON NET WEIGHT OF THE QUANTITY GOING IN THE EXPORT PRODUCT.

3. THE EXPANDED FORM OF ABBREVIATION USED IN THE EXPORT PRODUCT.

4. USE OF THE EXPORT PRODUCT.

Case No. 51 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001024AM26 RA File Number 24AX04000267 AM25 Licence No and Date 2411003904/01/10/2024 comments of DPIIT dated 09.04.2026, as under:

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 48.62 Kgs. as 6.76 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 119.75 Kgs. as 5.09 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

n the export item at SI.No.2 and its quantity may be allowed as 119.75 Kgs. as 5.09 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

71 SI.No.2 after taking 5% recovery from the scrap.

3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 114.59 Kgs as 5.77 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 257.62 Kgs as 6.84 Kgs./Kg content in the export item at SI.No.4 after taking 5% recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 215.62 Kgs as 1.54 Kgs./Kg content in the export item at SI.No.5 after taking 5 % recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 1461.74 Kgs. as 1.53 Kgs./Kg content in the export item at SI.No.6 after taking 5 % recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 337.55 Kgs as 5.40 Kgs./Kg content in the export item at SI.No.7 after taking 5 % recovery from the scrap.

ntained / utilized in the export item at SI.No.7 and its quantity may be allowed as 337.55 Kgs as 5.40 Kgs./Kg content in the export item at SI.No.7 after taking 5 % recovery from the scrap.

8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 410.59 Kgs as 7.74 Kgs./Kg content in the export item at SI.No.8 after taking 5 % recovery from the scrap.

9. Import item at SI No.9 shall be of relevant grade and size as contained / utilized in the export item at SI.No.9 and its quantity may be allowed as 149.89 Kgs as 7.43 Kgs./Kg content in the export item at SI.No.9 after taking 5 % recovery from the scrap.

10. Import item at SI No10 shall be of relevant grade and size as contained / utilized in the export item at SI.No.10 and its quantity may be allowed as 84.73 Kgs as 4.47 Kgs./Kg content in the export item at SI.No.10 after taking 5 % recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

be allowed as 84.73 Kgs as 4.47 Kgs./Kg content in the export item at SI.No.10 after taking 5 % recovery from the scrap. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

72

11. Import item at SI No.11 shall be of relevant grade and size as contained / utilized in the export item at SI.No.11 and its quantity may be allowed as 31.38 Kgs as 4.97 Kgs./Kg content in the export item at SI.No.11 after taking 5 % recovery from the scrap.

12. Import item at SI No.12 shall be of relevant grade and size as contained / utilized in the export item at SI.No.12 and its quantity may be allowed as 32.17 Kgs as 4.83 Kgs./Kg content in the export item at SI.No.12 after taking 5 % recovery from the scrap.

13.Import item at SI No.13 shall be of relevant grade and size as contained / utilized in the export item at SI.No.13 and its quantity may be allowed as 197.81 Kgs as 6.27 Kgs./Kg content in the export item at SI.No.13 after taking 5 % recovery from the scrap.

Case No. 52 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00000488AM26 RA File Number 56AX04000286 AM25 Licence No and Date 5611003317/08/10/2024 Weight of each Export Product. 1. be indicated. 2. 3. The above information may be furnished export product wise. 4. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

4 Weight of each Export Product. 1. be indicated. 2. 3. The above information may be furnished export product wise. 4. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

73 Quantities of export and import items in Nos. also in addition to their weights. 5.

Case No. 53 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00002753AM26 RA File Number 24AX04000273 AM25 Licence No and Date 2411003922/08/10/2024

Case No. 54 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ASTRA METAL SYSTEMS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00003584AM25 RA File Number 03AX04003381 AM25 Licence No and Date 0311037807/10/10/2024

Case No. 55 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001025AM26 RA File Number 24AX04000306 AM25 Licence No and Date 2411003953/23/10/2024 comments of DPIIT dated 09.04.2026, as under:

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

RA File Number 24AX04000306 AM25 Licence No and Date 2411003953/23/10/2024 comments of DPIIT dated 09.04.2026, as under:

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

74

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 47.32 Kgs. as 20.75 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 188.34 Kgs. as 4.02 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.

3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 236.30 Kgs as 4.29 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 383.17 Kgs as 3.08 Kgs./Kg content in the export item at SI.No.4 after taking 5% recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 96.41 Kgs as 4.81 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 96.41 Kgs as 4.81 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 97.27 Kgs. as 3.68 Kgs./Kg content in the export item at SI.No.6 after taking 5% recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 608.50 Kgs as 2.80 Kgs./Kg content in the export item at SI.No.7 after taking 5% recovery from the scrap.

8. Import item at SI No.8 shall be of relevant grade and size as contained / utilized in the export item at SI.No.8 and its quantity may be allowed as 148.69 Kgs as 3.85 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

allowed as 148.69 Kgs as 3.85 Kgs./Kg content in the export item at SI.No.8 after taking 5% recovery from the scrap.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

75 Case No. 56 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ORBIT BEARINGS (INDIA) PVT. LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00004125AM25 RA File Number 24AX04000318 AM25 Licence No and Date 2411004026/14/11/2024

Case No. 57 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name Meeting Number and Date HQ File Number HQRNORM REVIW00001026AM26 RA File Number 24AX04000339 AM25 Licence No and Date 2411004028/14/11/2024 comments of DPIIT dated 09.04.2026, as under:

1. Import item at SI No.1 shall be of relevant grade and size as contained / utilized in the export item at SI.No.1 and its quantity may be allowed as 754.52 Kgs. as 5.98 Kgs./Kg content in the export item at SI.No.1 after taking 5% recovery from the scrap.

2. Import item at SI No.2 shall be of relevant grade and size as contained / utilized in the export item at SI.No.2 and its quantity may be allowed as 87.51 Kgs. as 4.57 Kgs./Kg content in the export item at SI.No.2 after taking 5% recovery from the scrap.

3. Import item at SI No.3 shall be of relevant grade and size as contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 949.34 Kgs as 4.13 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

contained / utilized in the export item at SI.No.3 and its quantity may be allowed as 949.34 Kgs as 4.13 Kgs./Kg content in the export item at SI.No.3 after taking 5% recovery from the scrap.

4. Import item at SI No.4 shall be of relevant grade and size as contained / utilized in the export item at SI.No.4 and its quantity may be allowed as 133.35 Kgs as 8.26 Kgs./Kg content in the export item at UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

76 SI.No.4 after taking 5% recovery from the scrap.

5. Import item at SI No.5 shall be of relevant grade and size as contained / utilized in the export item at SI.No.5 and its quantity may be allowed as 216.36 Kgs as 5.07 Kgs./Kg content in the export item at SI.No.5 after taking 5% recovery from the scrap.

6. Import item at SI No.6 shall be of relevant grade and size as contained / utilized in the export item at SI.No.6 and its quantity may be allowed as 30.62 Kgs. as 1.55 Kgs./Kg content in the export item at SI.No.6 after taking 5 % recovery from the scrap.

7. Import item at SI No.7 shall be of relevant grade and size as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 55.64 Kgs as 1.70 Kgs./Kg content in the export item at SI.No.7 after taking 5 % recovery from the scrap.

as contained / utilized in the export item at SI.No.7 and its quantity may be allowed as 55.64 Kgs as 1.70 Kgs./Kg content in the export item at SI.No.7 after taking 5 % recovery from the scrap.

Case No. 58 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ZAIKAI INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00004275AM25 RA File Number 05AX04002530 AM25 Licence No and Date 0511029095/21/11/2024

Case No. 59 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name YASH SEALS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004285AM25 RA File Number 03AX04004121 AM25 Licence No and Date 0311038925/22/11/2024 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

77

Case No. 60 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ASHOKA FOUNDRY AND EQUIPMENT PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00002700AM26 RA File Number 02AX04000530 AM25 Licence No and Date 0211007642/22/11/2024 comments of Consultant (SKB) dated 09.04.2026, as under:

EXPORT ITEM: MECHANICAL SPARE ITEM OF STEEL PLANT - BLAST FURNACE (viz.

Number 02AX04000530 AM25 Licence No and Date 0211007642/22/11/2024 comments of Consultant (SKB) dated 09.04.2026, as under:

EXPORT ITEM: MECHANICAL SPARE ITEM OF STEEL PLANT - BLAST FURNACE (viz. Copper Tuyere, Copper Tuyere Cooler, Copper Contact Clamp, Lance Tip, Converter Tuyere Head, etc.) QTY: 16.00 MTS ITEM OF IMPORT: COPPER CAKES (Grade: OF01 / OF02 / OFD1 / BE57 / BE58 / DHP / DLP / BEEL) QTY: 17.24 MTS QUANTITY TO BE ALLOWED: 16.91 MTS INCLUSIVE OF 5.73% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. NOTE: THE GRADE AND NET CONTENT OF COPPER IN THE IMPORTED COPPER CAKES SHOULD BE MATCHED WITH THE GRADE AND NET CONTENT OF COPPER IN THE EXPORT PRODUCT.

Case No. 61 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name LECHLER INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM APPLY 00004523AM25 RA File Number 03AX04004433 AM25 Licence No and Date 0311039301/04/12/2024

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

78 Case No. 62 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name OTRIVA INDUSTRIES LLP Meeting Number and Date HQ File Number HQRNORM REVIW00004153AM26 RA File Number 34AX04000737 AM25 Licence No and Date 3411005848/23/12/2024

Case No. 63 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name WINDLASS ENGINEERS & SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00005440AM25 RA File Number 05AX04003183 AM25 Licence No and Date 0511030089/03/01/2025 comments of Tech-3 dated 05.04.2026, as under:

Import - 1 to 101 -Net to net as per GN4. Spares ,if any, will be imported as per policy for import of spares.

Case No. 64 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PAHARPUR COOLING TOWERS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00005594AM25 RA File Number 02AX04000620 AM25 Licence No and Date 0211007930/10/01/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00005594AM25 RA File Number 02AX04000620 AM25 Licence No and Date 0211007930/10/01/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

79

Detail technical note on manufacturing process including the relevant flow sheet. 1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 2. Weight of each Export Product. 3. be indicated. 4. 5. Sheet layout diagram of the material indicating the wastage during blanking. 6. Use of export product. 7.

Case No. 65 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name TECHNO DESIGNS Meeting Number and Date HQ File Number HQRNORM APPLY 00005649AM25 RA File Number 03AX04005275 AM25 Licence No and Date 0311040425/14/01/2025 comments of DPIIT dated 08 .04.2026, as under: Each export item at Sl.No.1 to contain 11.414 MT of Aluminium plates , sheets and strip. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 23.931 MT as 1.048 Kgs/Kg content in the export item after taking 40% recovery from scrap. 2.

Case No. 66 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES Meeting Number UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

icence No and Date 3111004567/25/03/2025 comments of Tech-3 dated 06.04.2026, as under:

Import 1. 380 kg. after recovery UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

93 2. 100 kg. after recovery 3.590 kg. after recovery 4.140 kg. after recovery 5.460 kg. after recovery 6.6740 kg. after recovery 7.430 kg. after recovery 8.1950 kg. after recovery 9.460 kg. after recovery 10.1890 kg. after recovery

Note: Grade of item of import will be same as used in EP

Case No. 92 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name TATA ADVANCED SYSTEMS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00006943AM25 RA File Number 31AX04000488 AM25 Licence No and Date 3111004611/28/03/2025

Case No. 93 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

AX04000488 AM25 Licence No and Date 3111004611/28/03/2025

Case No. 93 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

94 Party Name VINAYAKA INDUSTRIAL ENTERPRISES, Meeting Number and Date HQ File Number HQRNORM APPLY 00000071AM26 RA File Number 07AX04002041 AM25 Licence No and Date 0711014077/02/04/2025

Case No. 94 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name EPE PROCESS FILTERS AND ACCUMULATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000083AM26 RA File Number 09AX04001226 AM25 Licence No and Date 0911009360/03/04/2025

Case No. 95 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name HINDUSTAN PENCILS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000136AM26 RA File Number 03AX04000028 AM26 Licence No and Date 0311042926/08/04/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. 3. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ith dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. 3. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

95 be indicated. 4. The above information may be furnished export product wise.` 5.

Case No. 96 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name FIUNEX CONSULTANTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000178AM26 RA File Number 31AX04000005 AM26 Licence No and Date 3111004648/09/04/2025

Case No. 97 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000205AM26 RA File Number 05AX04000013 AM26 Licence No and Date 0511031885/11/04/2025 comments of Consultant (SKB) dated 06.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED IMPORT ITEMS AT SL No 2,3,4,5,6,13,14,15 & 16 WASTAGE: NIL QTY: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1 HA700UMNGA, MQ4 ACAC ASSY. 80000 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

,13,14,15 & 16 WASTAGE: NIL QTY: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. 1 HA700UMNGA, MQ4 ACAC ASSY. 80000 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

96 IMPORT ITEMS AT SL No 1,2 & 10 AS APPLIED IMPORT ITEMS AT SL No 8 & 9 WASTAGE @0.3% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. IMPORT ITEMS AT SL No 11 Wastage @ 10% ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. IMPORT ITEMS AT SL No 12 Wastage @ 8% ON THE NET WEIGHT OF PRODUCT. IMPORT ITEMS AT SL No 18,19,20,21,22,29,30,31& 32 WASTAGE: NIL IMPORT ITEMS AT SL No 17,23 & 26 AS APPLIED IMPORT ITEMS AT SL No 24 & 25 PRODUCT. IMPORT ITEMS AT SL No 27 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 2 HA700NX4GA, NX4 ACAC ASSY. 89220 NOS IMPORT ITEMS AT SL No 28 WASTAGE @ 8% ON THE NET WEIGHT OF PRODUCT. IMPORT ITEMS AT SL No 34,35,36,37,38,45,46,47,48,49 &50 WASTAGE: NIL IMPORT ITEMS AT SL No 33,39 & 42 AS APPLIED IMPORT ITEMS AT SL No 40 & 41 PRODUCT. IMPORT ITEMS AT SL No 43 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 3 HA700N5PGA01, ACAC ASY (NQ5 PE). 15431 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

1 PRODUCT. IMPORT ITEMS AT SL No 43 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 3 HA700N5PGA01, ACAC ASY (NQ5 PE). 15431 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

97 IMPORT ITEMS AT SL No 44 WASTAGE @ 8% ON THE NET WEIGHT OF PRODUCT. IMPORT ITEMS AT SL No 51,53,54,55,56,57,64,65,66 & 67 WASTAGE: NIL IMPORT ITEMS AT SL No 52,58,61 AS APPLIED IMPORT ITEMS AT SL No 59 & 60 PRODUCT. IMPORT ITEMS AT SL No 62 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 4. HA600NQ5GA01, NQ5 ACAC ASSY. 31499 NOS IMPORT ITEMS AT SL No 63 WASTAGE @ 8% ON THE NET WEIGHT OF PRODUCT. IMPORT ITEMS AT SL No 69 & 76 WASTAGE: NIL IMPORT ITEMS AT SL No 70 , 71& 73 AS APPLIED IMPORT ITEMS AT SL No 68&72 PRODUCT. IMPORT ITEMS AT SL No 74 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 5 HA700CNKGA, CN7 ACAC ASSY. 1524 nos IMPORT ITEMS AT SL No 75 WASTAGE @ 8% ON THE NET WEIGHT OF PRODUCT.

NOTE: THE GRADE OF THE IMPORTED ALUMINIUM HOLLOW PROFILES, ALUMINIUM ALLOY FOILS & ALUMINIUM COIL SHOULD MATCH THE GRADE OF THE ALUMINIUM HOLLOW PROFILES, ALUMINIUM ALLOY FOILS & ALUMINIUM COIL OF THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

L SHOULD MATCH THE GRADE OF THE ALUMINIUM HOLLOW PROFILES, ALUMINIUM ALLOY FOILS & ALUMINIUM COIL OF THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

98

Case No. 98 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HANON CLIMATE SYSTEMS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000209AM26 RA File Number 05AX04000023 AM26 Licence No and Date 0511031891/11/04/2025 comments of Consultant (SKB) dated 06.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED IMPORT ITEMS AT SL No 2,3,4,5,6,13,14,15 & 16 WASTAGE: NIL IMPORT ITEMS AT SL No 1,2 & 10 AS APPLIED IMPORT ITEMS AT SL No 8 & 9 PRODUCT. IMPORT ITEMS AT SL No 11 Wastage @ 10% ON THE NET WEIGHT OF PRODUCT. 1 HA700UMNGA, MQ4 ACAC ASSY. 80000 NOS IMPORT ITEMS AT SL No 12 Wastage @ 8% ON THE NET WEIGHT OF PRODUCT. IMPORT ITEMS AT SL No 18,19,20,21,22,29,30,31& 32 WASTAGE: NIL IMPORT ITEMS AT SL No 17,23 & 26 AS APPLIED 2 HA700NX4GA, NX4 ACAC ASSY. 89220 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

8,19,20,21,22,29,30,31& 32 WASTAGE: NIL IMPORT ITEMS AT SL No 17,23 & 26 AS APPLIED 2 HA700NX4GA, NX4 ACAC ASSY. 89220 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

99 IMPORT ITEMS AT SL No 24 & 25 PRODUCT. IMPORT ITEMS AT SL No 27 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. IMPORT ITEMS AT SL No 28 WASTAGE @ 8% ON THE NET WEIGHT PRODUCT. IMPORT ITEMS AT SL No 34,35,36,37,38,45,46,47,48,49 &50 WASTAGE: NIL IMPORT ITEMS AT SL No 33,39 & 42 AS APPLIED IMPORT ITEMS AT SL No 40 & 41 PRODUCT. IMPORT ITEMS AT SL No 43 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 3 HA700N5PGA01, ACAC ASY (NQ5 PE). 15431 NOS IMPORT ITEMS AT SL No 44 WASTAGE @ 8% ON THE NET WEIGHT PRODUCT. IMPORT ITEMS AT SL No 51,53,54,55,56,57,64,65,66 & 67 WASTAGE: NIL IMPORT ITEMS AT SL No 52,58,61 AS APPLIED IMPORT ITEMS AT SL No 59 & 60 PRODUCT. IMPORT ITEMS AT SL No 62 WASTAGE @ 10% ON THE NET WEIGHT PRODUCT. 4. HA600NQ5GA01, NQ5 ACAC ASSY. 31499 NOS IMPORT ITEMS AT SL No 63 WASTAGE @ 8% ON THE NET WEIGHT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

EIGHT PRODUCT. 4. HA600NQ5GA01, NQ5 ACAC ASSY. 31499 NOS IMPORT ITEMS AT SL No 63 WASTAGE @ 8% ON THE NET WEIGHT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

100 IMPORT ITEMS AT SL No 69 & 76 WASTAGE: NIL IMPORT ITEMS AT SL No 70 , 71 & 73 AS APPLIED IMPORT ITEMS AT SL No 68 & 72 PRODUCT. IMPORT ITEMS AT SL No 74 WASTAGE @ 13% ON THE NET WEIGHT PRODUCT. 5 HA700CNKGA, CN7 ACAC ASSY. 1524 nos IMPORT ITEMS AT SL No 75 WASTAGE @ 5% ON THE NET WEIGHT PRODUCT.

NOTE: THE GRADE OF THE IMPORTED ALUMINIUM HOLLOW PROFILES, ALUMINIUM ALLOY FOILS & ALUMINIUM COIL SHOULD MATCH THE GRADE OF THE ALUMINIUM HOLLOW PROFILES, ALUMINIUM ALLOY FOILS & ALUMINIUM COIL OF THE EXPORT PRODUCT.

Case No. 99 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name HINDUSTAN EQUIPMENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000230AM26 RA File Number 56AX04000009 AM26 Licence No and Date 5611003831/15/04/2025 comments of DPIIT dated 06.04.2026, as under: Quantity of export item may also be specified as 584 Nos.in addition to its weight. 1. Quantity of import item at Sl.No.1 may be allowed as 584 Nos on net to net basis. However, duty free weight of this item may be allowed as 1,85,000 Kgs as 1.48 Kgs./Kg. content in the export item after taking 20 % recovery from the scrap. 2.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

may be allowed as 1,85,000 Kgs as 1.48 Kgs./Kg. content in the export item after taking 20 % recovery from the scrap. 2.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

101 Case No. 100 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name BENGAL INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000239AM26 RA File Number 05AX04000095 AM26 Licence No and Date 0511031906/15/04/2025

Submit a neat sketch of each item of export with clear dimensions of the input material and export product. Also, submit the initial weight of the input material and the finished weight. 1.

Submit the Mill Test Certificate (MTC) of the input material. 2.

Submit a process flow chart of each export product and wastage at each stage of operation. 3.

Will the export product need indigenous inputs? If yes, furnish the export weight and the net content of the imported input. 4.

Case No. 101 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000252AM26 RA File Number 08AX04000067 AM26 Licence No and Date 0811014722/16/04/2025

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM APPLY 00000252AM26 RA File Number 08AX04000067 AM26 Licence No and Date 0811014722/16/04/2025

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

102 be indicated. 1. 2. The above information may be furnished export product wise. 3.

Case No. 102 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000267AM26 RA File Number 08AX04000068 AM26 Licence No and Date 0811014734/16/04/2025 comments of DPIIT dated 23 .03.2026, as under: Net weight of export item may be specified as 91,098 Kgs. 1. Import item at SI No.1 shall be of relevant grade and thickness as contained / utilized in the export item and its quantity may be allowed as 57,632 Kgs as 1.03 Kgs/Kg content in the export item as claimed by the firm. 2. Import item at SI No.2 shall be of relevant grade and thickness as contained / utilized in the export item and its quantity may be allowed as 25,070 Kgs as 1.214 Kgs/Kg content in the export item after taking 1/3rd recovery from scrap.
3.

Case No. 103 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name GE INDIA INDUSTRIAL PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000308AM26 RA File Number 31AX04000012 AM26 Licence No and Date 3111004679/17/04/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00000308AM26 RA File Number 31AX04000012 AM26 Licence No and Date 3111004679/17/04/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

103 comments of Tech-3 dated 06.04.2026, as under:

EP 1 to 28- Total wt. of export of 28 items- 107540.14 kg containing components of 27770.67 kg. made of imported tubes, 36992.47 kg. made of imported sheets & 51 kg. made of imported rod. i. EP- 29- Add wt. 283.5 kg. ii. Import 1 to 152- SS Tubes of relevant grade ,dia. & thickness - 43050 kg. after recovery, SS sheets of relevant grade & thickness - 70280 kg. after recovery, SS round bar of relevant grade - 255 kg. iii. Import item 153- 850 kg. after recovery. iv.

Case No. 104 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name SKH SHEET METALS COMPONENTS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000357AM26 RA File Number 05AX04000204 AM26 Licence No and Date 0511032011/21/04/2025 comments of Consultant (SKB) dated 09.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED COIL HOT DIP GALV COIL FIRST CHOICE EDGE TRIMMING, EDGE TRIMMED IN LAST TOOL STEEL GRADE: HX340LAD+Z - STEEL GRADE STANDARD: EN 10346:2015

LONG QUALITY NAME: 1 CONSOLE FOR CAR DOOR 8B3.

ALV COIL FIRST CHOICE EDGE TRIMMING, EDGE TRIMMED IN LAST TOOL STEEL GRADE: HX340LAD+Z - STEEL GRADE STANDARD: EN 10346:2015

LONG QUALITY NAME: 1 CONSOLE FOR CAR DOOR 8B3. 813.982 KONSOLE (OTHER PARTS AND ACCESSORIES – OTHER) 51306.00 KGS 82089.60 KGS INCLUSIVE OF 60% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

104 HX340LAD+Z100-M-BO COATING SIDES: TWO- SIDED

COATING FINISH: MINIMIZED SPANGLE COATING SPECIFICATION: Z 100 QTY: 82090.00 KGS

Case No. 105 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name L G BALAKRISHNAN & BROS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000501AM26 RA File Number 32AX04000069 AM26 Licence No and Date 3211008860/28/04/2025

Case No. 106 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name TECHNIP ENERGIES INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000551AM26 RA File Number 05AX04000325 AM26 Licence No and Date 0511032240/30/04/2025

Case No. 107 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000568AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

1/MEET/Mar/202526/20 Case Status Case Deferred Party Name Meeting Number and Date HQ File Number HQRNORM APPLY 00000568AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

105 RA File Number 24AX04000030 AM26 Licence No and Date 2411004510/01/05/2025

The quantities of export and import items submitted by the firm in their reply dated 19.03.2026 do not match with the quantities given in the application / Advance Authorisation. The firm may, therefore, be requested to clarify the same and submit information for export and import items as mentioned in the instant Advance Authorisation. 1.

Case No. 108 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ISGEC TITAN METAL FABRICATORS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000592AM26 RA File Number 05AX04000299 AM26 Licence No and Date 0511032296/02/05/2025 Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. be indicated. 3. 4. The above information may be furnished export product wise. 5. Quantity of import items at SI.No.3,4,15,16,21,22,27,28,32,33,37,38,43,44, 50 & 51 in Nos. also in addition to their weights. 6. Justification/basis for the quantities of welding materials supported by following information: 7. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

on to their weights. 6. Justification/basis for the quantities of welding materials supported by following information: 7. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

106 Weight of steel, which requires imported welding materials, giving break-up of: Steel Plates/Sheets upto 30mm thickness. 1. Steel Plates/ Sheets more than 30 mm thickness and upto 70 mm thickness. 2. Steel Plates/Sheets more than 70 mm thickness. 3. Others e.g. Flanges,Pipes,Tubes,Bars/Rods,Castings/Forgings etc. 4.

Case No. 109 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name PENGUIN PETROLEUM SERVICES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000598AM26 RA File Number 03AX04000351 AM26 Licence No and Date 0311043512/02/05/2025

Case No. 110 / NC/1/MEET/Mar/202526/20 Case Status Case Rejected Party Name KRN HEAT EXCHANGER AND REFRIGERATION LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000649AM26 RA File Number 13AX04000035 AM26 Licence No and Date 1311003895/06/05/2025 The Committee considered the case as per agenda and noted that the firm has submitted letter dt.21/07/2025 issued by the RA, Jaipur regarding surrender of the AA unutilized. The Committee, therefore, decided to close the case showing its status as rejected.

Case stands rejected.

Case No. 111 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

showing its status as rejected.

Case stands rejected.

Case No. 111 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

107 Party Name PARVEEN INDUSTRIES PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000690AM26 RA File Number 03AX04000540 AM26 Licence No and Date 0311043655/08/05/2025

Case No. 112 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SPARECO INDIA Meeting Number and Date HQ File Number HQRNORM APPLY 00000737AM26 RA File Number 05AX04000431 AM26 Licence No and Date 0511032476/09/05/2025 Case deferred for the DL reply of the firm.

Case No. 113 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ISGEC HITACHI ZOSEN LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000779AM26 RA File Number 05AX04000435 AM26 Licence No and Date 0511032553/14/05/2025 comments of DPIIT dated 30 .03.2026, as under: Net fabricated weight of export item may be specified as 38905 Kgs. 1. Import item at Sl.No.1 shall be of relevant grade and thickness as contained/utilized in the export item and its quantity may be allowed as 9045 Kgs as 1.0375 Kgs/Kg content in the export item as claimed by the firm. 2. Import item at Sl.No.2 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 6402 Kgs. as 1.01 Kgs/Kg content in the export item as claimed by the firm 3. Import item at SI.No.3 may be omitted as not imported by the firm. 4.

xport item and its quantity may be allowed as 6402 Kgs. as 1.01 Kgs/Kg content in the export item as claimed by the firm 3. Import item at SI.No.3 may be omitted as not imported by the firm. 4. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

108 Import item at Sl.No.4 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 3894 Kgs. as 1.02 Kgs/Kg content in the export item. 5. Import item at Sl.No.5 shall be of relevant grade and diameter as contained/utilized in the export item and its quantity may be allowed as 50 Kgs. as 1.02 Kgs/Kg content in the export item as claimed by the firm 6. Import items at SI.No.6 to 13 may be omitted as not imported by the firm. 7.

Case No. 114 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name KOSO INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000836AM26 RA File Number 31AX04000055 AM26 Licence No and Date 3111004758/15/05/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. be indicated. 3. 4. The above information may be furnished export product wise. 5.

Case No. 115 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name AIM NONWOVENS AND INTERIORS PRIVATE LIMITED Meeting Number UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

5 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name AIM NONWOVENS AND INTERIORS PRIVATE LIMITED Meeting Number UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

109 and Date HQ File Number HQRNORM APPLY 00000863AM26 RA File Number 31AX04000049 AM26 Licence No and Date 3111004789/16/05/2025 comments of Tech-1 dated 09.04.2026, as under:

IMPORT ITEM NO 1,2,3 AND 5 MAY BE ALLOWED WITH 5 % WASTAGE AS 1.05 KG/KG CONTENT IN EXPORT. i. IMPORT ITEM NO 4 MAY BE ALLOWED WITH 2 % WASTAGE AS 1.02 KG/KG CONTENT IN EXPORT ii.

Case No. 116 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name VENKATESWARA ENGINEERING WORKS Meeting Number and Date HQ File Number HQRNORM APPLY 00000874AM26 RA File Number 07AX04000238 AM26 Licence No and Date 0711014465/16/05/2025

Case No. 117 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name AZAD ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000917AM26 RA File Number 09AX04000144 AM26 Licence No and Date 0911009671/20/05/2025 comments of Consultant (SKB) dated 03.04.2026, as under:

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

mber 09AX04000144 AM26 Licence No and Date 0911009671/20/05/2025 comments of Consultant (SKB) dated 03.04.2026, as under:

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

110 SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT QUANTITY & WASTAGE TO BE ALLOWED STAINLESS STEEL BARS, GRADE: 10705BA, SIZE: 59X177, MM 916.30KGS INCLUSIVE OF 652.30% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 1 TURBINE BLADES (MADE FROM BLADE MATERIAL (STAINLESS STEEL BARS) GRADE: 10705BA ) NET CONTENT OF IMPORT ITEM SHALL BE 121.80 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 58 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC)) 1% OF THE FOB VALUE STAINLESS STEEL BARS, GRADE: 10705BU, SIZE: 56X202, 54X181, 42X167, 40X154, 36X140, 36X245, 42X281, 36X283, 33X265, 29X245, MM 6492.90KGS INCLUSIVE OF 608.86% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 2 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: 10705BU) NET CONTENT OF IMPORT ITEM SHALL BE 915.96 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 898 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC)) 1% OF THE FOB VALUE STAINLESS STEEL BARS, GRADE: 10705MBU, SIZE: 67X146, 58X122, 56X106, 48X111, 45X100, 41X89, 49X73, MM 7429.08 KGS INCLUSIVE OF 716.31% WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 3 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: 10705MBU) NET CONTENT OF IMPORT ITEM SHALL BE 910.08 KGS,

WASTAGE ON THE NET WEIGHT OF STAINLESS STEEL IN THE EXPORT PRODUCT. 3 TURBINE BLADES (MADE FROM STAINLESS STEEL BAR, GRADE: 10705MBU) NET CONTENT OF IMPORT ITEM SHALL BE 910.08 KGS, WHICH SHOULD BE REFLECTED IN THE SHIPPING BILLS AND INVOICE. 1264 NOS COOLANT OIL, (IPOL CUT 150 T (CNC/VMC)) 1% OF THE FOB VALUE

NOTE: THE GRADE OF IMPORTED STAINLESS STEEL SHOULD BE MATCHED WITH THE GRADE OF STEEL GOING IN THE EXPORT PRODUCT.

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

111

Case No. 118 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name DOZCO (INDIA) PVT LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00000924AM26 RA File Number 05AX04000598 AM26 Licence No and Date 0511032723/20/05/2025 comments of Tech-3 dated 07.04.2026, as under:

Import -22950 kg. including 8% wastage after recovery. 1.

Note: Grade of item of import will be same as used in EP.

Case No. 119 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name POWERSTATIC SOLUTIONS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00000958AM26 RA File Number 05AX04000316 AM26 Licence No and Date 0511032743/21/05/2025

Case No. 120 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

te 0511032743/21/05/2025

Case No. 120 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name DIGITAL LIVE SERVICES UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

112 Meeting Number and Date HQ File Number HQRNORM APPLY 00000961AM26 RA File Number 05AX04000604 AM26 Licence No and Date 0511032752/21/05/2025

SUBMIT COLOURED DRAWING OF THE EXPORT PRODUCT, WHICH COULD INDICATE THE REQUIREMENT OF IMPORTED COMPONENT. 1. WHERE IS THE APPLICATION OF THE EXPORT PRODUCT? 2. SUBMIT A LIST OF THE INDIGENOUS ITEMS REQUIRED TO MANUFACTURE THE EXPORT ITEM. 3.

Case No. 121 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ENDRESS + HAUSER FLOWTEC (INDIA) PRIVATE LIMITED Meeting Number and Date NC/ 1/ MEET/ Mar/ 202526/ 20 and 07/04/2026 HQ File Number HQRNORM APPLY 00000971AM26 RA File Number 03AX04000823 AM26 Licence No and Date 0311044057/21/05/2025 comments of Consultant (SKB) dated 03.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY TO BE RECOMMENDED SUPPORT TUBE P MASS FP 08 WELDED 3.1(FG CODE 71023362) PARTS OF FLOWMETER (NET CONTENT OF IMPORT ITEM IS 5508.30 KGS) THB-SANMAC304L-71- 36 71 MM X 36 MM HOLLOW BAR (71681844) TUBE DA 71X17.5 EN 10216.5- 1.4301 3.1 7397.10 KGS INCLUSIVE OF 34.29% WASTAGE ON THE NET WEIGHT OF THE IMPORT ITEM IN THE EXPORT 1 2100 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

.4301 3.1 7397.10 KGS INCLUSIVE OF 34.29% WASTAGE ON THE NET WEIGHT OF THE IMPORT ITEM IN THE EXPORT 1 2100 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

113

QTY: 7749.00 KGS PRODUCT. 2 SUPPORT TUBE P MASS FP 15 WELDED 3.1 (FG CODE 71023363) PARTS OF FLOWMETER (NET CONTENT OF IMPORT ITEM IS 3110.83 KGS)

912 NOS THB-SANMAC304L-71- 36 71 MM X 36 MM HOLLOW BAR (71681844) TUBE DA 71X17.5 EN 10216.5- 1.4301 3.1

QTY: 4292.00 KGS 4106.60 KGS INCLUSIVE OF 32.01% WASTAGE ON THE NET WEIGHT OF THE IMPORT ITEM IN THE EXPORT PRODUCT. 3 SUPPORT TUBE P MASS FP 25 WELDED 3.1 (FG CODE 71023364) PARTS OF FLOWMETER (NET CONTENT OF IMPORT ITEM IS 588.30 KGS)

150 NOS THB-SANMAC304L-71- 36 71 MM X 36 MM HOLLOW BAR (71681844) TUBE DA 71X17.5 EN 10216.5- 1.4301 3.1

QTY: 886.00 KGS 839.27 KGS INCLUSIVE OF 42.66% WASTAGE ON THE NET WEIGHT OF THE IMPORT ITEM IN THE EXPORT PRODUCT.

NOTE: THE GRADE OF THE IMPORTED ITEM SHOULD MATCH THE GRADE OF THE EXPORT PRODUCT.

Case No. 122 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001007AM26 RA File Number 31AX04000072 AM26 Licence No and Date 3111004819/22/05/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001007AM26 RA File Number 31AX04000072 AM26 Licence No and Date 3111004819/22/05/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

114 comments of Tech-3 dated 06.04.2026, as under:

Import 1. 65 kg. after recovery 2. 65 kg. after recovery 3.55 kg. after recovery 4.75 kg. after recovery 5.700 kg. after recovery 6.1740 kg. after recovery 7.1150 kg. after recovery 8.150 kg. after recovery

Note: Grade of item of import will be same as used in EP.

Case No. 123 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name TECHNO AIRCON INDUSTRIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001121AM26 RA File Number 05AX04000738 AM26 Licence No and Date 0511032962/28/05/2025

Case No. 124 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

121AM26 RA File Number 05AX04000738 AM26 Licence No and Date 0511032962/28/05/2025

Case No. 124 / NC/1/MEET/Mar/202526/20 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

115 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001147AM26 RA File Number 33AX04000016 AM26 Licence No and Date 3311002714/29/05/2025

1. COLOURED DRAWING OF THE EXPORT PRODUCT WITH COMPLETE DIMENSIONS OF THE FINISHED PRODUCT AND ALSO THE SIZE OF THE IMPORTED ITEMS, WHICH IS REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT.

2. SUBMIT APPENDIX 4E ON THE WASTAGE TO BE CLAIMED ON A NET-TO-NET BASIS OF THE IMPORTED INPUTS AND ALSO THE DETAILS OF THE INDIGENOUS ITEM, IF ANY IN THE TABLE.

3. SUBMIT DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION.

4. IN OTHER AAs, IMPORTED INPUTS ARE NBR RUBBER AND RENT. HOWEVER, IN THIS AA, THE ONLY IMPORTED ITEM IS RENT. HOW WILL IT BE POSSIBLE TO MANUFACTURE AN EXPORT ITEM USING RENT? JUSTIFY IN DETAILED NOTE.

5. SUBMIT THE EXCEL SHEET ON THE MATERIAL BALANCING ON THE QUANTITY CONTENTS GOING IN THE EXPORT PRODUCT, AND ALSO CONTENTS AVAILABLE IN THE IMPORTED ITEMS.

USING RENT? JUSTIFY IN DETAILED NOTE.

5. SUBMIT THE EXCEL SHEET ON THE MATERIAL BALANCING ON THE QUANTITY CONTENTS GOING IN THE EXPORT PRODUCT, AND ALSO CONTENTS AVAILABLE IN THE IMPORTED ITEMS. FOR THE REMAINING, HOW WILL THEY BE MET? INDICATE THE SAME IN APPENDIX 4E IN INDIGENOUS INPUTS.

Case No. 125 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001190AM26 RA File Number 31AX04000084 AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

116 Licence No and Date 3111004855/30/05/2025

Case No. 126 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name THE ANUP ENGINEERING LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001315AM26 RA File Number 08AX04000405 AM26 Licence No and Date 0811015223/05/06/2025

Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished. 1. Weight of each Export Product. 2. be indicated. 3. 4. The above information may be furnished export product wise. 5.

Case No. 127 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ELIN ELECTRONICS LTD. Meeting Number and Date HQ File Number HQRNORM APPLY 00001356AM26 RA File Number 03AX04000349 AM26 Licence No and Date 0311044573/06/06/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

d Date HQ File Number HQRNORM APPLY 00001356AM26 RA File Number 03AX04000349 AM26 Licence No and Date 0311044573/06/06/2025 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

117

Case No. 128 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name WEATHERFORD DRILLING AND PRODUCTION SERVICES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001361AM26 RA File Number 34AX04000210 AM26 Licence No and Date 3411006573/06/06/2025 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 12.04.2026. The Committee, after deliberating upon the case, decided to defer the case for further examination of his comments.

Case No. 129 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name L G BALAKRISHNAN & BROS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00001406AM26 RA File Number 32AX04000201 AM26 Licence No and Date 3211009179/10/06/2025 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 12.04.2026. The Committee, after deliberating upon the case, decided to defer the case for further examination of his comments.

Case No. 130 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001459AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

ase Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001459AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

118 RA File Number 33AX04000031 AM26 Licence No and Date 3311002744/11/06/2025

1. COLOURED DRAWING OF THE EXPORT PRODUCT WITH COMPLETE DIMENSIONS OF THE FINISHED PRODUCT AND ALSO THE SIZE OF THE IMPORTED ITEMS, WHICH IS REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT.

2. SUBMIT APPENDIX 4E ON THE WASTAGE TO BE CLAIMED ON A NET-TO-NET BASIS OF THE IMPORTED INPUTS AND ALSO THE DETAILS OF THE INDIGENOUS ITEM, IF ANY IN THE TABLE.

3. SUBMIT DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION.

4. IN OTHER AAS, IMPORTED INPUTS ARE NBR RUBBER AND RENT. HOWEVER, IN THIS AA, THE ONLY IMPORTED ITEM IS NBR RUBBER. HOW WILL IT BE POSSIBLE TO MANUFACTURE EXPORT ITEM USING NBR RUBBER? JUSTIFY IN DETAILED NOTE.

Case No. 131 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SHAH EYE CARE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001481AM26 RA File Number 07AX04000330 AM26 Licence No and Date 0711014714/12/06/2025

Case No. 132 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name KOMATSU INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003209AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

tus Case Deferred Party Name KOMATSU INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003209AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

119 RA File Number 05AX04000868 AM26 Licence No and Date 0511033298/12/06/2025 The Committee considered the case as per agenda and noted that as per decision taken in NC-1 meeting held on 17/09/2025, certain clarifications were sought from PC-4 vide mail dt.16.12.2025. The same is still awaited. The Committee, therefore, decided to remind PC-4.

Case No. 133 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name DANVITA (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00006177AM26 RA File Number 03AX04001271 AM26 Licence No and Date 0311044813/14/06/2025 comments of Consultant (SKB) dated 03.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED WASTAGE TO BE ALLOWED SILVER BRAZING ROD, VARIOUS CONTENT, RANGING FROM 0% TO 45%. QTY: 4000.00 KGS 0.5% OF THE FOB VALUE. WROUGHT COPPER TUBES FOR REFRIGERATION AND AIR CONDITIONING PURPOSES, GRADE 1 AND 2, CONDITION - SOFT ANNEALED, LIGHT ANNEALED AND LIGHT DRAWN, SIZE OUTSIDE DIAMETER FROM 4.00 MM TO UP TO AND INCLUDING 45 MM, WALL THICKNESS FROM 0.2 MM TO UP TO AND INCLUDING 0.5 MM. QTY: 270465.00 KGS. 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 1 Heat Exchanger Units. 400000.00 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

00 KGS. 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. 1 Heat Exchanger Units. 400000.00 KGS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

120 ALUMINIUM TUBES AND PIPES, SIZE OUTSIDE DIAMETER FROM 4.00 MM TO UP TO AND INCLUDING 45 MM. QTY: 2191.00 KGS 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. ALUMINIUM RETURN BEND & TRIPOD, SIZE OUTSIDE DIAMETER FROM 7.00 MM TO UP TO AND INCLUDING 12.7 MM (IMPORTED IN UOM OF NOS, 1000 NOS IS EQUAL TO APPROX. 4.50 KGS). QTY: 154.00 KG NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. ALUMINIUM FOIL STOCK, THICKNESS 0.10 MM TO 0.30 MM. QTY: 1846.00 KG 1.02 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. CORROSION INHIBITIVE COATING (IMPORTED IN UOM OF OUNCES, 33.80 OUNCES IS EQUAL TO 1.00 LITRE). QTY: 31.00 LITER AS APPLIED COPPER U BEND & TRIPOD OF DIAMETER RANGING FROM 5.00 MM TO UP TO 9.52 MM (IMPORTED IN UOM OF NOS, 1000 NOS IS EQUAL TO APPROX. 8.00 KGS). QTY: 308.00 KGS NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE. ALUMINIUM BRAZING RINGS FROM A DIAMETER OF 5.00 MM TO 9.52 MM (IMPORTED IN UOM OF NOS, 6000 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 1846.00 KGS 0.5% OF THE FOB VALUE. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

M TO 9.52 MM (IMPORTED IN UOM OF NOS, 6000 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 1846.00 KGS 0.5% OF THE FOB VALUE. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

121 COPPER BRAZING RINGS FROM A DIAMETER OF 5.00 MM TO 9.52 MM (IMPORTED IN UOM OF NOS, 3000 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 1538.00 KGS 0.5% OF THE FOB VALUE. EVAPORATIVE OIL CUM LUBRICATING FOR FIN STAMPING. QTY: 160.00 LITER AS APPLIED ALUMINIUM HEADERS & MANIFOLD WITH/WITHOUT BRAZED CONNECTION, WITH/WITHOUT FITTINGS/DISTRIBUTOR (IMPORTED IN UOM OF NOS, 30 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 154.00 KGS 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. COPPER HEADERS & MANIFOLD WITH/WITHOUT BRAZED CONNECTION, WITH/WITHOUT FITTINGS/DISTRIBUTOR (IMPORTED IN UOM OF NOS, 4 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 154.00 KG. 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT. WELD NUT (IMPORTED IN UOM OF NOS, 250 NOS IS EQUAL TO APPROX. 1.00 KGS). QTY: 154.00 KGS 1.01 KG/KG ON THE NET WEIGHT OF THE IMPORTED ITEM IN THE EXPORT PRODUCT.

NOTE: THE GRADE & SIZE (OD & ID) OF THE IMPORTED ITEM SHOULD MATCH WITH THE GRADE & SIZE (OD & ID) OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

NOTE: THE GRADE & SIZE (OD & ID) OF THE IMPORTED ITEM SHOULD MATCH WITH THE GRADE & SIZE (OD & ID) OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

122

Case No. 134 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name LIFTECH INDUSTRIES (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001575AM26 RA File Number 30AX04000174 AM26 Licence No and Date 3011007215/19/06/2025 comments of Consultant (SKB) dated 09.04.2026, as under:

SL No ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 HARROW DISC NOTCHED, MADE OF ALLOY STEEL PLATE 13800.00 KGS ALLOY STEEL PLATE 30MNB5 SIZE 1100MMX2650MMX4MM QTY: 18837.00 KGS 1.22 KG/KG ON THE NET WEIGHT OF THE EXPORT PRODUCT. 2 HARROW DISC NOTCHED MADE OF ALLOY STEEL PLATE 6000.00 KGS ALLOY STEEL PLATE 30MNB5 SIZE 1200MMX2900MMX4MM QTY: 8760.00 KGS 1.25 KG/KG ON THE NET WEIGHT OF THE EXPORT PRODUCT.

THE GRADE OF ALLOY STEEL SHOULD BE MATCHED WITH THE GRADE OF ALLOY STEEL OF THE EXPORT PRODUCT.

Case No. 135 / NC/1/MEET/Mar/202526/20 Case Status Case Approved UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

D WITH THE GRADE OF ALLOY STEEL OF THE EXPORT PRODUCT.

Case No. 135 / NC/1/MEET/Mar/202526/20 Case Status Case Approved UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

123 Party Name SCHOTT POONAWALLA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003726AM26 RA File Number 03AX04001343 AM26 Licence No and Date 0311044923/19/06/2025 The Committee considered the case as per agenda and decided to modify the ad-hoc norms fixed earlier as per comments of Tech-1 dated 03.04.2026, as under:

1. IMPORT ITEM NO 2 OF REL SIZE AND SPEC - 1.02 KG/KG CONTENT IN EXPORT
2. IMPORT ITEM NO 3 OF REL SIZE AND SPEC- NETT TO NETT
3. REST OF THE ITEMS ARE PACKING MATERIAL MAY BE ALLOWED AS PER PACKING POLICY

Case No. 136 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SAWS DRILLTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001606AM26 RA File Number 09AX04000234 AM26 Licence No and Date 0911009885/20/06/2025 The Committee considered the case as per agenda and noted the comments of Consultant (SKB) dated 12.04.2026. The Committee, after deliberating upon the case, decided to defer the case for further examination of his comments.

Case No. 137 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name SHIVALIK BIMETAL CONTROLS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00001624AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

us Case Deferred Party Name SHIVALIK BIMETAL CONTROLS LTD Meeting Number and Date HQ File Number HQRNORM APPLY 00001624AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

124 RA File Number 05AX04000886 AM26 Licence No and Date 0511033442/23/06/2025

Case No. 138 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name GENESIS PACKAGING PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001640AM26 RA File Number 07AX04000429 AM26 Licence No and Date 0711014817/23/06/2025 comments of Consultant (SKB) dated 09.04.2026, as under:

SL NO ITEM OF EXPORT ITEM OF IMPORT QUANTITY TO BE ALLOWED 1 LID (NET CONTENT OF IMPORT ITEM IS 120390.403 KGS) COLD ROLLED STAINLESS STEEL SHEETS 430 BA WITH PVC0.30MM X 1055MM X 820MM QTY: 165000.00 KGS 146876.29 KGS INCLUSIVE OF 22.0% WASTAGE ON THE NET WEIGHT OF COLD ROLLED STAINLESS STEEL SHEETS 430 BA+B & W WITH PVC IN THE EXPORT PRODUCT.

NOTE:

1. WASTAGE ON THE NET WEIGHT OF IMPORTED STAINLESS STEEL WITH PVC IN THE EXPORT PRODUCT.
2. THE GRADE OF IMPORTED STAINLESS STEEL SHOULD MATCH THE GRADE OF STAINLESS STEEL USED IN THE EXPORT PRODUCT.
3. THE THICKNESS OF THE IMPORTED COLD-ROLLED STAINLESS-STEEL SHEETS 430 BA+B & W WITH PVC SHOULD MATCH THE THICKNESS OF THE PRODUCT BEING EXPORTED. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

IMPORTED COLD-ROLLED STAINLESS-STEEL SHEETS 430 BA+B & W WITH PVC SHOULD MATCH THE THICKNESS OF THE PRODUCT BEING EXPORTED. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

125

Case No. 139 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name VICTURA TECHNOLOGIES PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001644AM26 RA File Number 05AX04001013 AM26 Licence No and Date 0511033461/23/06/2025

Case No. 140 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name INTEGRAL COMPONENT MANUFACTURERS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM REVIW00003283AM26 RA File Number 04AX04000267 AM26 Licence No and Date 0411009842/23/06/2025

Case No. 141 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name RINAC INDIA LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001763AM26 RA File Number 07AX04000529 AM26 Licence No and Date 0711014888/27/06/2025

Case No. 142 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

X04000529 AM26 Licence No and Date 0711014888/27/06/2025

Case No. 142 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

126 Party Name WEST COAST PAPER MILLS LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001773AM26 RA File Number 07AX04000359 AM26 Licence No and Date 0711014889/30/06/2025

Details of export product in terms of structural design, calculations, and brief notes about export product as well as import inputs. 1. Justification of claimed Wastage over per unit requirement without wastage. 2. Quantity of import items required for manufacturing one unit of export product for each export item. (Share excel sheet). 3. Calculations on per unit requirement of Import item for manufacturing one unit of export product without wastage. (Share excel sheet) 4. Wastage claimed in the manufacturing process and details of recoverable wastage. (Share Excel sheet) 5. Declaration regarding non-recoverable wastage in the manufacturing process, and confirmation that such wastage (if any) is not being reused in manufacturing/export items, has not been provided. 6. FOB values mentioned in Appendix 5B, the application, and Appendix 4E are different. Clarification is required. 7. Appendix 4E, “authorization obtained in the past & ratified by Norms Committee” is marked as N.A.; however, it is learnt that the company has availed Advance Authorization licences earlier.

x 4E, “authorization obtained in the past & ratified by Norms Committee” is marked as N.A.; however, it is learnt that the company has availed Advance Authorization licences earlier. Annexure-III also does not indicate the total quantity of the resultant product and the quantity of different inputs consumed. Needs clarification. 8. Copy of RCMS certificate with extended validity period (as applicable) 9. Required declarations, as per Annexure ‘A’ to Trade Notice No. 1/06 dated 07.06.2005; Annexure to Trade Notice No. 4/AM06 dated 06.07.2005; Annexure ‘A’ to Trade Notice No. 12/AM05 dated 10.03.2005; Annexure ‘A’ to Trade Notice No. 03/AM11 dated 08.10.2010, Para 4.07 and Para 4.15 of HBP; and Policy Circular No. 9 dated 30.06.2003, Undertaking showing that none of your import or export items falls under SCOMET List. 10.

Case No. 143 / NC/1/MEET/Mar/202526/20 Case Status Case Withdrawn Party Name SUNBEEN COCOA PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

. 143 / NC/1/MEET/Mar/202526/20 Case Status Case Withdrawn Party Name SUNBEEN COCOA PRIVATE LIMITED Meeting Number and Date UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

127 HQ File Number HQRNORM APPLY 00001819AM26 RA File Number 33AX04000044 AM26 Licence No and Date 3311002810/02/07/2025 The Committee considered the case as per agenda and noted that NC-VI has wrongly transferred its case to NC-1 as export item in this case is COCOA BUTTER. The committee, therefore, decided to transfer this case to NC-VI showing its status as withdrawn.

Case No. 144 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name SARA SAE PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001912AM26 RA File Number 05AX04001093 AM26 Licence No and Date 0511033718/07/07/2025 comments of Consultant (SKB) dated 03.04.2026, as under:

ITEM OF EXPORT: SARA SAE BOP CONTROL UNIT RATED FOR 3000 PSI WP WITH ACCESSORIES (OIL FIELD EQUIPMENT) QUANTITY: 1 NOS ITEMS OF IMPORTS: Item No 1 to 326: Net to net under GN-4 with accountability clause. WASTAGE TO BE ALLOWED: NIL. QUANTITY TO BE ALLOWED: NET TO NET UNDER GN-4 WITH ACCOUNTABILITY CLAUSE.

Case No. 145 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name TITAN ENGINEERING & AUTOMATION LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001922AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

eferred Party Name TITAN ENGINEERING & AUTOMATION LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001922AM26 UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

128 RA File Number 04AX04000308 AM26 Licence No and Date 0411009937/07/07/2025

Case No. 146 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001937AM26 RA File Number 31AX04000149 AM26 Licence No and Date 3111005052/08/07/2025

Case No. 147 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name WOODECORINA (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001947AM26 RA File Number 09AX04000279 AM26 Licence No and Date 0911009983/08/07/2025

Case No. 148 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name GK TECHNO COMMERCIAL INDUSTRIES Meeting Number and Date HQ File Number HQRNORM APPLY 00001980AM26 RA File Number 33AX04000051 AM26 Licence No and Date 3311002834/09/07/2025

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

Date HQ File Number HQRNORM APPLY 00001980AM26 RA File Number 33AX04000051 AM26 Licence No and Date 3311002834/09/07/2025

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

129 Case No. 149 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name FINE TOOLS (INDIA) PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00001989AM26 RA File Number 07AX04000604 AM26 Licence No and Date 0711015000/09/07/2025

Case No. 150 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name ULTRA CORPOTECH PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002000AM26 RA File Number 31AX04000156 AM26 Licence No and Date 3111005061/10/07/2025

Case No. 151 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name MINDRILL SYSTEMS & SOLUTIONS PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002004AM26 RA File Number 02AX04000225 AM26 Licence No and Date 0211009065/10/07/2025 comments of Consultant (SKB) dated 07.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT& QUANTITY APPLIED QUANTITY TO BE ALLOWED 1 JACKELG DRILL KIT 250 845 NOS ALUMINIUM ALLOY EXTRUDED 4742.65 KGS INCLUSIVE OF 47.70% UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

APPLIED QUANTITY TO BE ALLOWED 1 JACKELG DRILL KIT 250 845 NOS ALUMINIUM ALLOY EXTRUDED 4742.65 KGS INCLUSIVE OF 47.70% UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

130 HOLLOW TUBES VARIOUS ALUMINIUM TUBES INCLUDING BUT NOT LIMITED TO EXTRUDED ALUMINIUM TUBE, ALLOY: EN-AW 7075, EN- AW 6063 AND EN-AW 6005 TEMPER: T6 (ACC. TO DIN EN 573-3, EN 754-1,2 AND 7) QTY: 5458.70 KGS WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

(JACKLEG 250 DRILL WITH STANDARD AIR LEG, LUBRICATOR AND ACCESSORIES (ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES - 3211.00 KGS AND PISTON ROD SEMI-FINISHED - 6083.82 KGS)

PISTON ROD SEMI-FINISHED, ST52, SAE4140

‘QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT

ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 5458.70 KGS 4742.65 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

2 JACKELG DRILL KIT 250, JACKLEG 250 DRILL WITH STANDARD AIR LEG, LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

3211.000KGS AND STEEL SEAMLESS TUBES, PIPES CHROME OR NON- CHROME PLATED - 6083.820) 845 NOS STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT

HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 5458.70 KGS 4742.65 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

STAINLESS STEEL SEAMLESS PIPES, VARIOUS GRADES OF STEEL TUBES, INCLUDING BUT NOT LIMITED TO SS 304, SS308, 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT 3 JACKELG DRILL KIT 250 JACKLEG 250 DRILL

NLESS STEEL SEAMLESS PIPES, VARIOUS GRADES OF STEEL TUBES, INCLUDING BUT NOT LIMITED TO SS 304, SS308, 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT 3 JACKELG DRILL KIT 250 JACKLEG 250 DRILL WITH STANDARD AIR LEG, LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

3211.000KGS AND STAINLESS STEEL SEAMLESS PIPES - 6083.820 KGS) 845 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

131 SS316

QTY: 9007.70 KGS

729.64 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 839.80 KGS

4 JACKELG DRILL KIT 250 (MODIFIED) JACKLEG 250 ROCKDRILL WITH MODIFIED AIR LEG, LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

494.000KGS AND 935.970KGS) 130 NOS PISTON ROD SEMI-FINISHED, ST52, SAE4140

QTY: 1385.80 KGS 1334.97 KGS INCLUSIVE OF 42.63% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 839.80 KGS 729.64 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

5 JACKELG DRILL KIT 250 (MODIFIED) JACKLEG 250 ROCKDRILL WITH MODIFIED AIR LEG, LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

494.000KGS AND 935.970KGS) 130 NOS PISTON ROD SEMI-FINISHED, ST52, SAE4140

QTY: 1385.80 KGS

1334.97 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM 6 Jackelg Drill Kit 250 (Modified), Jackleg 250 Rockdrill with Modified Air Leg, Lubricator and accessories (Aluminium Alloy Extruded Hollow Tubes

494.000Kgs and Stainless Steel

NIUM 6 Jackelg Drill Kit 250 (Modified), Jackleg 250 Rockdrill with Modified Air Leg, Lubricator and accessories (Aluminium Alloy Extruded Hollow Tubes

494.000Kgs and Stainless Steel Seamless Pipes - 935.970Kgs) 130 NOS 729.64 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

132 QTY: 839.80 KGS STEEL SEAMLESS TUBES, VARIOUS GRADE OF STEEL TUBES INCLUDING BUT NOT LIMITED TO SS 304, SS308, SS316

QTY: 1385.80 KGS 1334.97 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 1679.60 KGS 1459.28 KGS INCLUSIVE OF 47.70% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

7 JACKELG DRILL KIT 83, JACKLEG 83 ROCKDRILL WITH AIR LEG , LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

988.000KGS AND 1871.944KGS) 260 NOS PISTON ROD SEMI-FINISHED, ST52, SAE4140

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 1679.60 KGS 1459.28 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

8 JACKELG DRILL KIT 83, JACKLEG 83 ROCKDRILL WITH AIR LEG , LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

988.000KGS AND 1871.944KGS) 260 NOS STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT 9 JACKELG DRILL KIT

LESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT 9 JACKELG DRILL KIT 83, 260 NOS ALUMINIUM ALLOY EXTRUDED 1459.28 KGS INCLUSIVE OF UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

133 HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 1679.60 KGS WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

JACKLEG 83 ROCKDRILL WITH AIR LEG , LUBRICATOR AND ACCESSORIES (ALUMINIUM TUBES

988.000KGS AND 1871.944KGS) STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 3359.20 KGS 2918.55 KGS INCLUSIVE OF 47.70% EXPORT PRODUCT

10 PUSHERLEG MODEL NO. 755, PUSHERLEG MODEL NO. 755- 1.3M (ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES - 1976.000KGS AND PISTON ROD SEMI-FINISHED -3743.888KGS) 520 NOS PISTON ROD SEMI-FINISHED, ST52, SAE4140

QTY: 5543.2 KGS 5339.90 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 3359.20 KGS 2918.55 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140. 5339.90
KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT 11 PUSHERLEG MODEL NO. 755, PUSHERLEG MODEL NO.

AMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140. 5339.90
KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT 11 PUSHERLEG MODEL NO. 755, PUSHERLEG MODEL NO. 755- 1.3M (ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES - 1976.000KGS AND PISTON ROD SEMI-FINISHED -3743.888KGS) 520 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

134

QTY: 5543.20 KGS PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 3359.20 KGS 2918.55 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

12 PUSHERLEG MODEL NO. 755, PUSHERLEG MODEL NO. 755- 1.3M (ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES - 1976.000KGS AND PISTON ROD SEMI-FINISHED -3743.888KGS) 520 NOS STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 5543.20 KGS 5339.90
KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 1679.60 KGS 1459.28 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

13 PUSHERLEG MODEL NO. 755 (MODIFIED) PUSHERLEG MODEL NO. 755 (MODIFIED) (ALUMINIUM TUBES 988.000KGS AND 1871.944KGS) 260 NOS STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM 14 PUSHERLEG MODEL NO. 755 (MODIFIED) PUSHERLEG MODEL NO.

2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM 14 PUSHERLEG MODEL NO. 755 (MODIFIED) PUSHERLEG MODEL NO. 755 (MODIFIED) (ALUMINIUM TUBES 988.000KGS AND 1871.944KGS) 260 NOS 1459.28 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

135 QTY: 1679.60 KGS STEEL SEAMLESS TUBES, PIPES, CHROME OR NON-CHROME PLATED, ST52, SAE4140.

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 1679.60 KGS 1459.28 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

15 PUSHERLEG MODEL NO. 755 (MODIFIED) PUSHERLEG MODEL NO. 755 (MODIFIED) (ALUMINIUM TUBES 988.000KGS AND 1871.944KGS) 260 NOS STEEL SEAMLESS TUBES, VARIOUS GRADE OF STEEL TUBES INCLUDING BUT NOT LIMITED TO SS 304, SS308, SS316

QTY: 2771.60 KGS 2669.95 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 2519.40 KGS 2188.91 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

16 Pusherleg Model No. 7, Pusherleg Model No.

ODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 2519.40 KGS 2188.91 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

16 Pusherleg Model No. 7, Pusherleg Model No. 7 (Aluminium Alloy Extruded Hollow Tubes

1482.000Kgs and Piston Rod semi- finished - 2807.916Kgs) 390 NOS PISTON ROD SEMI-FINISHED, ST52, SAE4140

QTY: 4157.40 KGS 4004.93 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT Pusherleg Model No. 7, Pusherleg Model No. 7 (Aluminium Alloy Extruded Hollow Tubes

1482.000Kgs and Piston Rod semi- HOLLOW TUBES 2188.91 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT 17 390 NOS UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

136 TO EXTRUDED ALUMINIUM QTY: 2519.40 KGS PRODUCT

finished - 2807.916Kgs) STEEL SEAMLESS TUBES, PIPES CHROME OR NON-CHROME PLATED, ST52, SAE4140 QTY: 4157.40 KGS 4004.93 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 2519.40 KGS 2188.91 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

18 Pusherleg Model No. 7, Pusherleg Model No.

ODUCT HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 2519.40 KGS 2188.91 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT

18 Pusherleg Model No. 7, Pusherleg Model No. 7 (Aluminium Alloy Extruded Hollow Tubes

1482.000Kgs and Piston Rod semi- finished - 2807.916Kgs) 390 NOS STEEL SEAMLESS TUBES, PIPES CHROME OR NON-CHROME PLATED, ST52, SAE4140 QTY: 4157.40 KGS 4004.93 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT 19 PISTON ROD, PISTON ROD (PISTON ROD SEMI-FINISHED - 6083.817KGS) 845 NOS Piston Rod semi-finished, ST52, SAE4140 QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT 20 PISTON ROD, PISTON ROD (STEEL SEAMLESS TUBES, PIPES CHROME OR NON- CHROME PLATED- 6083.817KGS)

845 NOS STEEL SEAMLESS TUBES, PIPES CHROME OR NON-CHROME PLATED, ST52, SAE4140

QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT

21 PISTON ROD, PISTON ROD (STEEL SEAMLESS TUBES, PIPES CHROME OR NON- CHROME PLATED- 6083.817KGS) 845 NOS STAINLESS STEEL SEAMLESS PIPES, VARIOUS GRADES OF STEEL TUBES, INCLUDING BUT NOT LIMITED TO SS 304, SS308, SS316 QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

TUBES, INCLUDING BUT NOT LIMITED TO SS 304, SS308, SS316 QTY: 9007.70 KGS 8677.35 KGS INCLUSIVE OF 42.63% EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

137 22 ALUMINIUM FEED CYLINDER (ALUMINIUM ALLOY EXTRUDED HOLLOW TUBES - 3952.000KGS) 1040 NOS HOLLOW TUBES TO EXTRUDED ALUMINIUM QTY: 6718.40 KGS 5837.12 KGS INCLUSIVE OF WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT. 23 Chuck Nut for Model No.83 or 250 or 610 or 630 (Copper-based Alloy - 1159.420Kgs) 1159.42 KGS COPPER-BASED ALLOY VARIOUS COPPER-BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 QTY: 4000.00 KGS 2514.40
KGS INCLUSIVE OF 116.95% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT. 24 Rifle Nut for Model No.83 or 250 or 610 or 630 (Copper-based Alloy - 1684.211Kgs) 1684.211 KGS COPPER-BASED ALLOY VARIOUS COPPER-BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 QTY: 4000.00 KGS 2788.86 KGS INCLUSIVE OF 65.60% EXPORT PRODUCT. 25 Liner for Model No.83 or 250 or 610 or 630 (Copper-based Alloy - 1149.701Kgs) 1149.701 KGS COPPER-BASED ALLOY VARIOUS COPPER-BASED ALLOYS INCLUDING BUT NOT LIMITED TO C95400, C95500, C93200, CUSN8, CUSN8 QTY: 4000.00 KGS 2509.32KGS INCLUSIVE OF 118.30% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT.

NOTE:

1. WASTAGE ON THE NET WEIGHT OF IMPORTED ITEMS IN THE EXPORT PRODUCT.

2509.32KGS INCLUSIVE OF 118.30% WASTAGE ON THE NET WEIGHT OF THE ITEM OF IMPORT IN THE EXPORT PRODUCT.

NOTE:

1. WASTAGE ON THE NET WEIGHT OF IMPORTED ITEMS IN THE EXPORT PRODUCT.
2. THE GRADE OF THE IMPORTED ITEMS (ALUMINIUM ALLOY, STAINLESS STEEL, CARBON STEEL & COPPER-BASED ALLOY SHOULD MATCH THE GRADE OF ALUMINIUM ALLOY, STAINLESS STEEL, CARBON STEEL &COPPER-BASED ALLOY OF THE EXPORT PRODUCT.

Case No. 152 / NC/1/MEET/Mar/202526/20 Case Status Case Approved Party Name METAL FORMS PRIVATE LIMITED UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

138 Meeting Number and Date HQ File Number HQRNORM APPLY 00002031AM26 RA File Number 04AX04000366 AM26 Licence No and Date 0411009954/11/07/2025 comments of Consultant (SKB) dated 09.04.2026, as under:

SL NO ITEM OF EXPORT QUANTITY ITEM OF IMPORT & QUANTITY APPLIED QUANTITY & WASTAGE TO BE ALLOWED 1 CATWALK AS - 4531009 - AUTOMOBILE COMPONENTS

29901.30 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 5.80 AND COIL WIDTH 1320)

QTY: 31500.00 KGS 30648.80 KGS INCLUSIVE OF 2.5% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. 2 PLATFORM AS - 4259815

AUTOMOBILE COMPONENTS

11795.87 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 4.80 AND COIL WIDTH 1320) QTY: 12500.00 KGS 12090.80 KGS INCLUSIVE OF 2.5% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. 3 STEP AS - 3106907 - AUTOMOBILE COMPONENTS

250.34 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 4.80 AND COIL WIDTH 1320) QTY: 300.00 KGS

T WEIGHT OF THE EXPORT PRODUCT. 3 STEP AS - 3106907 - AUTOMOBILE COMPONENTS

250.34 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 4.80 AND COIL WIDTH 1320) QTY: 300.00 KGS 256.60 KGS INCLUSIVE OF 2.5% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. 4 STEP AS RH - 3586679 - AUTOMOBILE COMPONENTS

686.22 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 4.80 AND COIL WIDTH 1320)

QTY: 700.00 KGS 703.40 KGS INCLUSIVE OF 2.5% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT. UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

139 5 PLATFORM AS RH

4671102 - AUTOMOBILE COMPONENTS 9967.94 KGS HOT ROLLED STEEL STRIP IN COIL, GRADE: E250 BR (SS400, THICK 4.80 AND COIL WIDTH 1320)

QTY: 10500.00 KGS 10217.14 KGS INCLUSIVE OF 2.5% WASTAGE ON THE NET WEIGHT OF THE EXPORT PRODUCT.

Case No. 153 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002398AM26 RA File Number 33AX04000062 AM26 Licence No and Date 3311002904/30/07/2025

1. COLOURED DRAWING OF THE EXPORT PRODUCT WITH COMPLETE DIMENSIONS OF THE FINISHED PRODUCT AND ALSO THE INITIAL SIZE OF THE IMPORTED ITEMS, WHICH IS REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT.

2. SUBMIT APPENDIX 4E ON THE WASTAGE TO BE CLAIMED ON A NET WEIGHT OF THE EXPORT PRODUCT AND ALSO ON THE GROSS WEIGHT OF THE IMPORTED INPUTS, AND ALSO THE DETAILS OF THE INDIGENOUS ITEM, IF ANY, IN TABLE 2 OF THE INDIGENOUS INPUTS.

O BE CLAIMED ON A NET WEIGHT OF THE EXPORT PRODUCT AND ALSO ON THE GROSS WEIGHT OF THE IMPORTED INPUTS, AND ALSO THE DETAILS OF THE INDIGENOUS ITEM, IF ANY, IN TABLE 2 OF THE INDIGENOUS INPUTS.

3. SUBMIT DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION.

4. WHAT IS THE NET WEIGHT OF THE IMPORTED ITEMS No. 1, 2 AND 3 IN THE EXPORT PRODUCT?

5. WHAT IS THE REASON FOR WRITING THE SAME IMPORTED ITEM AT TWO PLACES? UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)

140

Case No. 154 / NC/1/MEET/Mar/202526/20 Case Status Case Deferred Party Name BRAKE PARTS INDIA PRIVATE LIMITED Meeting Number and Date HQ File Number HQRNORM APPLY 00002661AM26 RA File Number 33AX04000072 AM26 Licence No and Date 3311002945/13/08/2025

1. COLOURED DRAWING OF THE EXPORT PRODUCT WITH COMPLETE DIMENSIONS OF THE FINISHED PRODUCT AND ALSO THE DIMENSIONS OF THE INITIAL SIZE OF THE IMPORTED ITEMS, WHICH WILL BE REQUIRED FOR THE MANUFACTURING OF THE EXPORT PRODUCT.

2. SUBMIT APPENDIX 4E ON THE WASTAGE TO BE CLAIMED ON THE NET WEIGHT OF THE EXPORT PRODUCT, VIZ. A VIZ ON THE GROSS WEIGHT OF THE IMPORTED INPUTS, AND ALSO INDICATE THE DETAIL OF THE INDIGENOUS ITEM, IF ANY, IN TABLE 2 OF APPENDIX 4E.

3. SUBMIT DETAILED PROCESS OF MANUFACTURING AND WASTAGE AT EACH STAGE OF OPERATION.

4. WHAT IS THE NET WEIGHT OF THE IMPORTED ITEM No 1 AND 2 IN THE EXPORT PRODUCT?

UDIN00082248AM27 Digitally Signed. Name: ASHWANI KUMAR Location: DGFT(HQ)