IN FORCE Advance Authorisation

DGFT Minutes

Reliability

In force — no superseding record on file.

Document text

| | | |

Government of India Ministry of Commerce and Industry Department of Commerce DIRECTORATE GENERAL OF FOREIGN TRADE

Index & Agenda

98 2 2 oo ok ok ok

Meeting No - NC/7/MEET/February/2023-24/01 Meeting Date -12.05.2023

Meeting Index of Norms Committee - 7 Plastic / Rubber Items

)

mg

THE CHAIRMANSHIP OF SHRI Subhash Chand Aggarwal, ADDL. DGFT

ITC Meeting No. 01/87ALC1/2023-24 of NORMS COMMITTEE (NC-7) dealing with ‘Chapter 39 and 40 of (HS) Code held on 12.05.2023 under the Chairmanship of Shri Subhash Chand Aggarwal, Addl. DGFT, Directorate General of Foreign Trade, Department of Commerce, Vanijaya Bhawan, New Delhi-110011. Following attended the Meeting:

1. 1. Shri Nitish Suri, JOG Shri Shaish Kumar, Technical Expert (Consultant), DGFT
43 ) Shri NandO.P. ShL a l,rma, TechnicalTechnicalExpertExpert (Consultant),(Consultant), DGFTC&PC 5) Shri Mahesh Kumar, ASO consequentialFollowingactionareasthe perdecisions Foreign Tradeof thePolicy/Procedures: Norms Committee after deliberation and RA concerned shall take

==> picture [156 x 120] intentionally omitted <==

----- Start of picture text ----- Manual98 ie oe 2k 9 Casesok i ok eo Aetrg Sia 4 oO" \o “onan Hert 7D Aeetars2 mei ----- End of picture text -----

‘

| | |

Case No. A-01	M/s Hutamaki India Ltd.,Thane	Status:
M. No. 01/24	Hars F.No. 01/87/50/085/AM19/DES.VII	Deferred
Date: 12.05.2023	RA’s F.No. 03/94/40/960/AM18
Adv. Authorization	0310819362 dt. 22.02.2018
No./Date

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0310819362 dt. 22.02.2018 issued under Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. The Committee decided to defer the case as the case is under examination.

0310819362 dt. 22.02.2018 issued under Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. The Committee decided to defer the case as the case is under examination.

|Case No. A-02|M/s Hutamaki India Ltd., Thane|a oe|Status:|
|---|---|---|---|
|M. No. 01/24|Hars F.No. 01/87/50/Hutamaki-1/AM23/DES.VII_|||Deferred|
|Date: 12.05.2023|RA’s F.No. 03/94/40/746/AM19|||
|Adv. Authorization|0310825327 dt. 30.11.2018|||
|No./Date|ae|||
|Subject: Fixation of adhoc input output norms in respect||of advance authorization||
|30.11.2018 issued under Para 4.07 of FTP on selfdeclaration basis.||||
|The casewas considered as peragenda. The Committee decided to deferthe|||case asthe|
|examination.||||
|Case No. A-03|M/s Malaya Rub-Tech Industriews, Kochi||Status:|
|M. No. 01/24|Haqrs F.No. 01/87/50/526/AM20/DES.VII||Deferred|
|Date: 12.05.2023|RA’s F.No. 10/24/40/080/AM20|||
|Adv. Authorization|1010060355 dt. 27.11.2019|||
|No./Date||||

Subject: Fixation of adhoc input output norms in respect of advance authorization No. 0310825327 dt. 30.11.2018 issued under Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. The Committee decided to defer the case as the case is under

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 1010060355 dt. 27.11.2019 issued under Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. On the recommendation of Technical Expert, it was decided to call for the following information to the firm: i

1 Reason for importing high grade rubber. (ISNR-10)aridexporting low grade rubber TSR-20. 129 tenancerege Mol COA report with DRC of both import and export items.) =) 3 Detailed explanation of the import and export items ‘With-reference to India Standard Specification of the items.

| | |

Case No.A-04	M/s Malaya Rub-Tech Industriews,	Kochi			Status:
M. No. 01/24	Hars F.No. 01/87/50/614/AM20/DES.VII		a		Deferred
Date: 12.05.2023	RA’s F.No. 10/24/40/106/AM20	:		a
Adv. Authorization	1010060408 dt. 25.02.2020
No./Date

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 1010060408 dt. 25.02.2020 issued under Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. On the recommendation of Technical Expert, it was decided to call for the following information to the firm:

der Para 4.07 of FTP on self declaration basis.

The case was considered as per agenda. On the recommendation of Technical Expert, it was decided to call for the following information to the firm:

1 Reason for importing high grade rubber (ISNR-10) and exporting low grade rubber TSR-20. COA report with DRC of both import and exporti items. ae 3 Detailed explanation of the import and export items with reference to India Standard Specification of the items. - 4 Case No. A-05 M/s Malaya Rub-Tech Industriews, Kochi Status: M. No. 01/24 Hars F.No. 01/87/50/487/AM20/DES.VII Approved Date: 12.05.2023 RA’s F.No. 10/24/40/072/AM20 Adv. Authorization 1010060330 dt. 28.11.2019 No./Date Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 1010060330 dt. 28.11.2019 issued under Para 4.07 of FTP on self-declaration basis. The case was considered as per agenda. On the basis of comments provided by the Technical Expert, it was decided to fix the adhoc input output norms with 5% wastage as under:

==> picture [455 x 221] intentionally omitted <==

genda. On the basis of comments provided by the Technical Expert, it was decided to fix the adhoc input output norms with 5% wastage as under:

==> picture [455 x 221] intentionally omitted <==

----- Start of picture text ----- Natural Qty Import item ——| Qty. Rubber-Technically Specified | 201.600MT TBC2X(Thick Brown 211.680MT Rubber 20(ISNR20) Crepe) 2x : RA may take consequential may take consequential take consequential action as per policy/procedure. per policy/procedure. policy/procedure. surtur than MO/4APATRA Jom Director General of Foreign Trade Directorate General of Forelgn Trade DIS SICEeGene ot [india] Vanijyea Jet tee Delhi ----- End of picture text -----

RA may take consequential may take consequential take consequential action as per policy/procedure. per policy/procedure. policy/procedure.

==> picture [433 x 74] intentionally omitted <==

----- Start of picture text ----- M/s Astral Limited, Anmedabad Status: Approved Date: 12.05.2023 RA’s F.No. 08/24/40/355/AM20 Adv. Authorization 0810147126 dt. 30.01.2020 No./Date ext ----- End of picture text -----

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0810147126 dt. 30.01.2020 issued under Para 4.07 of FTP on self-declaration basis.

The case was considered as per agenda. The Committee decided to fix the adhoc input output norms with nil wastage as under:-

==> picture [471 x 121] intentionally omitted <==

laration basis.

The case was considered as per agenda. The Committee decided to fix the adhoc input output norms with nil wastage as under:-

==> picture [471 x 121] intentionally omitted <==

----- Start of picture text ----- PVC Pipe and 1,00,000.00KgsQty =|1 | PVC ResinImport Item Fittings Calcium Zinc Stabilizer E+4 ImpactPolyethylene Modifier Wax | T700.00Ke: | 16 | Calcium Carbonate 8617 00.00Kg RA may take consequential action as per policy/procedure. ----- End of picture text -----

==> picture [437 x 55] intentionally omitted <==

----- Start of picture text -----

||||||||
|---|---|---|---|---|---|---|
|M/s|Astral|Limited,|Anmedabad|Status:|
||M.|No.|01/24|Hars|F.No.|01/87/50/576/AM20/DES.VII|Approved|
|Date:|12.05.2023|RA’s|F.No.|08/24/40/356/AM20|
|Adv.|Authorization|0810147127|dt.|30.01.2020|

----- End of picture text -----

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0810147127 dt. 30.01.2020 issued under Para 4.07 of FTP on self-declaration basis.

The case was considered as per agenda. The Committee decided to fix the adhoc input output norms with nil wastage as under:-

==> picture [465 x 121] intentionally omitted <==

laration basis.

The case was considered as per agenda. The Committee decided to fix the adhoc input output norms with nil wastage as under:-

==> picture [465 x 121] intentionally omitted <==

----- Start of picture text -----

|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|PVC|Pipe and|60,000.00KgsQty|a1|||CPVC|ResinImport Item|
|Fittings|
|4|||[PolyethyleneWax]|||———(10200.00Kg|
|[6|2160.00Kg|
|RA|may take|consequential|action|as|per|__|policy/procedure. ProcessingAidi|itn|cee ||480.00kg|

----- End of picture text -----

| | | | |

==> picture [432 x 70] intentionally omitted <==

----- Start of picture text -----

|||||||||
|---|---|---|---|---|---|---|---|
|Case|No. A-08|M/s Asawa|Insultation|Pvt.|Ltd.,N.|Mumbai|Status:|
|M.|No.|01/24|Hars|F.No.|01/87/50/921/AM21/DES.VII|Approved|
|Date:|12.05.2023|RA’s|F.No.|03/94/40/601/AM21|
|Adv.|Authorization|0310839327|dt.|04.11.2020|
|No./Date|

----- End of picture text -----

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0310839327 dt. 04.11.2020 issued under Para 4.07 of FTP on self-declaration basis.

The case was considered as per agenda. The Committee noted that the firm has claimed 4% wastage for input No. 1. The firm has also stated that input at SI. No. 2 & 3 are indigenously procured. Therefore, the Committee decided to fix the adhoc input output norms with 2% wastage on input at SI. No. 1 since the wastage has commercial value and suffix ‘(containing 81,300Kg of Aluminium Foil)’ in the description of export item as under

==> picture [468 x 226] intentionally omitted <==

----- Start of picture text -----

|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Export|Item|Import|Item|!|Qty.|
|Smart|PIR|Panel|AXAX20 ||2,50,000.00|(1)|Aluminium|Foil|60|82,926.00Kg|
|(containing|81,300.00Kg ||Sq.|Meter|Micron|Thickness|both|
|Aluminium|Foil)|sides|(+/- 10% Tolerance)|
|(2)|Polyfoam|DS 40 DC|Not|allowed|
|since|
|indigenously|
|procured|
|(3)|MDI|(Methylene |}|Not|allowed|
|Diphenyl|Disocyanate)|since|
|indigenously|
|RA|procured|
|may take|consequential|action|as|per|policy/procedure.|

----- End of picture text -----

==> picture [135 x 85] intentionally omitted <==

----- Start of picture text ----- AbbessSUH an TM eeeFaTasio fret naTradeade Directorate cap ane ot a lea spe ord,ferehoant Vvanijye BHawan ----- End of picture text -----

==> picture [432 x 73] intentionally omitted <==

eFaTasio fret naTradeade Directorate cap ane ot a lea spe ord,ferehoant Vvanijye BHawan ----- End of picture text -----

==> picture [432 x 73] intentionally omitted <==

----- Start of picture text -----

|||||||||
|---|---|---|---|---|---|---|---|
|M/s|Rapid|Engineering|Co.|Pvt.|Ltd.,|Sahibabad|Status:|
|Approved|
|0510395482|dt.|31.08.2015|
|No./Date|

----- End of picture text -----

Subject: Review of Norms Committee’s decision taken in meeting No. 9 held 0n31.01.2018 in respect of advance authorization No. 0510395482 dt. 31.08.2015 issued under Para 4.07 of FTP on self-declaration basis.

The case was considered as per agenda. It was noted that the case was earlier decided in meeting No. 9 held on 31.01.2018 on repeat basis. However, items of import applied for, were not matching with that of import item in the earlier advance authorization On the basis of comments provide by Technical Expert, the Committee decided to fix the adhoc input output norms with 3.6% wastage as under:-

==> picture [453 x 168] intentionally omitted <==

----- Start of picture text -----

|||||||||
|---|---|---|---|---|---|---|---|
|_|Expartitery|Gey|||[fe|wiey|Import|Item|
|Powder|Coating|||1.00Kg|Epoxy|Resin|:|
|Resin|Polyster|Resin|
|3|
|ia|[BenzeneaGloag|
|eeecEe|Me|
|8|
|pe|IGT|Se|a|ae|at|0) OR|
|RA may|take|consequential|action|as|per|policy/procedure.|

----- End of picture text -----

| | | | |

olyster|Resin| |3| |ia|[BenzeneaGloag| |eeecEe|Me| |8| |pe|IGT|Se|a|ae|at|0) OR| |RA may|take|consequential|action|as|per|policy/procedure.|


**----- End of picture text -----**<br>


| | | | | 

|||M/sGarware Polyester Ltd., Aurangabad|Status:|
|---|---|---|---|
|||Hars F.No. 01/87/50/115/AM20/DES.VII|Approved|
|Adv.|Authorization|0310829191dt.22.05.2019||



Subject: Fixation of adhoc input output norms in respect of advance authorization No. 0310829191 dt. 22.05.2019 issued under Para 4.07 of FTP on self-declaration basis. 

The case was considered as per agenda. It was noted that the representative of the firm had appeared in norms committee meeting held n 08.12.2022 and explained about the product and manufacturing process and later on provided data. He also stated that product is first time made in India. It was also noted that process of manufacturing involve three stages Lamination along with coatings of adhesive. 

On the basis of comments provided by Technical Expert, the Committee decided to allow quantity of import and export as given below, on one time basis: 

```text
|| Exportitem<br>Paint Protection <br>Film|[|<br> |32526.37Kg|Qty <br>32526.37Kg<br>(846439Sq.FT)El|||<br>i<br>El(having|ImportItem<br>Pet Film with Silicon Coating<br>(having23Micron. StrippablePET<br>Film(|Qty.<br>21,467.4Kg|
|---|---|---|---|---|---|
||||4 |Self<br>5|TPU Filmwith2X75Micron.<br>Strippable Polyster Film)<br>dh<br>SelfHealingLiquid(18.56%Solid)<br>SelfHealingHardner<br>AdhesivewithHardner(18.56|35,453.7Kg<br>8,650.6Kg|

-|---| ||||4 |Self 5|TPU Filmwith2X75Micron. Strippable Polyster Film) dh SelfHealingLiquid(18.56%Solid) SelfHealingHardner AdhesivewithHardner(18.56|35,453.7Kg 8,650.6Kg|




RA may take consequential action as per policy/procedure. 

| 

**==> picture [104 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
veiliys Brain, how O°<br>**----- End of picture text -----**<br>


|Case No. A-11|F|M/s Mehta Stone Consortium,Gurgaon|Status:|
|---|---|---|---|
|M. No. 01/24||Hars F.No. HQRNORMAPPLY00070894AM21|Approved|
|Date: 12.05.2023||RA’s F.No. O5AA04026030AM21||
|Adv. Authorization||0511000948 dt. 27.01.2021||
|No./Date||||



Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0511000948 dt. 27.01.2021 issued under Para 4.07 of FTP on self-declaration basis. 

The case was considered as per agenda. On the basis of comments provided by Technical Expert, the Committee decided to fix the adhoc input output norms with 2% wastage as under: 

```text
|aaa<br>SPC( PolySelf StickTile)|Qty<br>5610.89Sq.Meter |SPC(Stone Plastic|5723.10Sq.Meter|
|---|---|---|
||Composite)||
|RAmaytakeconsequential|actionasper policy/procedure.||
|Case No. A-12|M/sArkema Chemicals India Pvt. Ltd., N.|Status:|
||Mumbai|Deferred|
|M. No. 01/24|Hars F.No. 01/87/50/564/AM20/DES.VII||
|Date: 12.05.2023|RA’s F.No. 03/94/40/865/AM20||
|Adv. Authorization|0310834360 dt. 21.01.2020||
|No./Date|||

.|Status:| ||Mumbai|Deferred| |M. No. 01/24|Hars F.No. 01/87/50/564/AM20/DES.VII|| |Date: 12.05.2023|RA’s F.No. 03/94/40/865/AM20|| |Adv. Authorization|0310834360 dt. 21.01.2020|| |No./Date|||




Subject: Request for amendment in the description of export item from ‘ Polyester Resin Reafree 4704’ to ‘Polyester Resin Reafree 4704/Powder Polyester Reafree 4704’ in respect of advance authorization No. 0310834360 dt. 21.01.2020 issued under Para 4.07 of FTP on self-declaration basis. 

The case was considered as per agenda. The Committee decided examination. 

to defer the case as the case is under 

| | 

| | 

| 

| 

**==> picture [429 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
```text
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|Case|No.|A-13|M/s|Avigiri|Urethane|and|Rubber|Industries|Pvt.|||Status:|
|Ltd.,|Tumakuru|Deferred|
|M.|No.|01/24|Hars|F.No.|01/87/50/Dy.No.|
|225959/AM23/DES.VII|
|Date:|12.05.2023|RA’s|F.No.|07/24/40/227/AM21|
|Adv.|Authorization|0710117303|dt.|20.11.2020|
|No./Date|
|‘|

----- End of picture text -----

Subject: Fixation of adhoc input output norms in respect of advance authorization No. 20.11.2020 issued under Para 4.07 of FTP on self-declaration basis.

0710117303 dt.

The case was considered as per agenda. The Committee decided to call for the following information to the firm:

1 | To give complete details in Annexure 4E indicating both imported and indigenous raw materials required for the manufactured of 1Kg of export item Calculation indicating net import content and wastage separately. NE

==> picture [433 x 72] intentionally omitted <==

----- Start of picture text -----

||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|Case|No.|A-14|M/s|Welset|Plast|Extrusions|Pvt.|Ltd.,|Mumbai|Status:|
|M.|No.|01/24|Hars|F.No.|01/87/50/527/AM20/DES.VII|Approved|
|Adv.Date:Authorization12.05.2023|0310833740RA’s|F.No. 03/95/40/746/AM20dt.|27.12.2019|
|No./Date|

----- End of picture text -----

Subject: Re-consideration regarding fixation of adhoc input output norms in respect of advance authorization No. 0310833740 dt. 27.12.2019 issued under Para 4.07 of FTP on self-declaration basis.

==> picture [539 x 190] intentionally omitted <==

----- Start of picture text -----

||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|The|case|was|considered|as|per|agenda.|On|the|basis|of|comments|provided|by|Technical|Experts,|the|
|Committee|decided|to|fix the|adhoc|input output|norms|with|3%|wastage|as|under:-|
|Export|Item|Import|Item|1|Qty.|
|(NetPVC|Master|Batch|1,00,000Kg|||1|PVC Resin_|15450.00Kg|
|content|Per|1.Kg:|PVC|Pi|Plasticizer|(DOP)|9270.00Kg|
|Resin=0.1545Kg,|Plasticizer|3|Antimony Trioxide|||
|(DOP)=0.0927Kg,|76220.00Kg|
|Trioxide=|0.7622Kg,|Stabilizer=Antimony|4|||Stabulizer|(Relevant)|2060.00Kg|
|0.0206Kg)|ey|EASe|Inhe|
|RA may|take consequential action as per policy/procedure.|

----- End of picture text -----

==> picture [136 x 76] intentionally omitted <==

----- Start of picture text ----- »Z wary, SS Senora of Foreign Trade Directorate babe tt. of Commerce vanijya Bhawan, ----- End of picture text -----

omitted <==**

----- Start of picture text ----- »Z wary, SS Senora of Foreign Trade Directorate babe tt. of Commerce vanijya Bhawan, ----- End of picture text -----

|Case No. A-15|M/s Century Industrial Products Pvt. Ltd., Kolkata | Status:|M/s Century Industrial Products Pvt. Ltd., Kolkata | Status:|
|---|---|---|
|M. No. 01/24|Hars F.No.|Approved|
|iz|HOQRNORMAPPLYO0005640AM23/DES.VII||
|Date: 12.05.2023|RA’s F.No. 0O2AX04000549AM23||
|Adv. Authorization|0211003637 dt. 10.01.2023||
|No./Date|||

Subject: Correction in the decision of Norms Committee regarding date of advance authorization.

The case was considered as per agenda. It was noted that the case has already been ratified vide meeting No.18 held on 24.02.2023 but due to typographical mistake/cut and paste, the date of advance authorization was typed 10.01.2013 instead of 10.01.2023. Therefore, the Committee decided to correct the date of advance authorization from 10.01.2013 to 10.01.2023 and all other conditions will remain unchanged.

Case No. A-16	M/s Cytech Coating Pvt. Lts., Valsad	Status:
M. No. 01/24	Hars F.No.	Approved
	HQRNORMAPPLY00004511AM23/DES.VII
Date: 12.05.2023	RA’s F.No. 52AX04001693AM23
Adv. Authorization	5211003617 dt. 21.11.2022
No./Date

| |---|---|---| |M. No. 01/24|Hars F.No.|Approved| ||HQRNORMAPPLY00004511AM23/DES.VII|| |Date: 12.05.2023|RA’s F.No. 52AX04001693AM23|| |Adv. Authorization|5211003617 dt. 21.11.2022|| |No./Date|||

Subject: Request for correction in the description of import item in respect of advance authorization No. 5211003617 dt. 21.11.2022 issued under Para 4.07 of FTP on self declaration basis. The case was considered as per agenda. The case was earlier considered by Norms Committee in its meeting No.14 held on 23.12.2022 and _ description of import item was given as ‘ Polypropylene Glycol (PPG) 1000/2000/200’. The firm brought it to the notice of Norms Committee and stated that the description of import item has not been typed/mentioned as per the advance authorization. The Committee decided to correct/amend the description of import item as under: ‘Polypropylene Glycol (PPG) ‘Polypropylene Glycol (PPG) 1000/2000/200’ Corrected to 1000/2000/200/400

All other conditions will remain unchanged.

| | | | | | | | | | | |

Case No.A-17<br>M. No.01/24<br>Date: 12.05.2023<br>Adv. Authorization<br>No./Date	M/s KingfaScience&Technology (I) Ltd.,<br>Chennai<br>Hars F.No. 01/87/50/657/AM19/DES. VII<br>RA’s F.No. 04/24/40/171/AM19<br>0410164907 dt. 26.11.2018		Status:<br>Deferred
		eg

Subject: Request for amendment in the percentage net content of import on export product 57.30% instead of 54% in respect of advance authorization No. 0410164907 dt. 26.11.2018 issued under Para 4.07 of FTP on self-declaration basis.

e percentage net content of import on export product 57.30% instead of 54% in respect of advance authorization No. 0410164907 dt. 26.11.2018 issued under Para 4.07 of FTP on self-declaration basis.

The case was considered as per agenda. The Committee noted that the firm vide its letter dt. 05.04.2023 has stated that P.P. Content in export is 57% even then Qty of P.P. on net content basis should be 48 X 0.57 = 27.36MT and there is no material balance . The Committee decided to call for the representative on PH or VC.

Case No. A-18 M/s Shrinath Rotopack Pvt, Ltd., Hyderabad Status: M. No. 01/24 Hars F.No. 01/87/50/Shrinath Rotopack Pvt. Approved Date: 12.05.2023 Ltd/AM23/DES.VII Adv. Authorization 0911001451 dt. 30.08.2021(09AA04011136AM22) No./Date/RA’s F.No. 0911001452 DT. 30.08.2021 (09AA04011038AM22) Subject: 0911000749 DT. 29.04.2021 (094A0400177AM22) Material Request for amendment in the description of export product from ‘ Printed Flexible Packaging of Rolls’ inof OnerespectLayer of abovein the mentioned form of Pouch’advance to ‘Printedauthorization,Flexible Packaging Material of One Layer in the form The the case was considered as per agenda. The Committee noted that the firm has requested for amendment in description of export product in these three advance authorization which were issued on repeat basis. In these three subject advance authorization 5% wastage has been given. The firm’s request is to delete word Printed in the export product and add Roll along with Pouch.

were issued on repeat basis. In these three subject advance authorization 5% wastage has been given. The firm’s request is to delete word Printed in the export product and add Roll along with Pouch. The Committee noted the firm has not claimed amendany wastagethe descriptionfor Printingof export & Pouchproductmaking.as under:-After consideration upon the issue, the Committee decided to

Description Printed of export item Amended Description of export item Layer in thFl e xibleformPackagingof Pouch’ Material of One | to thFl e xibleform Packagingof Rolls/Pouch Material of One Layer in

All other conditions will remain unchanged.

==> picture [133 x 45] intentionally omitted <==

----- Start of picture text ----- HET Soro GONE ie A wirede Jon eet TAT rea OF merce Director yer) et % af india veniys Bt ----- End of picture text -----

Verbatim extracted text (OCR/PDF). Older scans and tables may show extraction artifacts — verify against the original for anything you act on.

Analysis

No analysis generated for this document yet (analysis runs over brief docs + on-demand). Run build_analysis.py --ids 10241 --apply.