DGFT Committee Minutes

1 M]NUTES OF NORMS CONIMlllEE(NC‐ 7)OF PLASTIC&RUBBER PRODUCTS' NIEETNG N0 11ノAM19 岬 LD ON19.07.2018) UNDER THE CHARMANSHIP OF SIIRI S.B.S.REDDY,ADDL.DGFr Mecting No. l1l87-NC-7/2018 of NORMS COMMITTEE (NC-7) dealing with 'Chapter 39 and 40 of ITC (IIS) Code' held on 19.07.2018, under the Chairmanship of Shri S.B.S. Reddy, Addl. DGFT, Directorate General of Foreign Trade, Department of Commercr, Udyog Bhawan, New Delhi-l10011. Following officers attended the Meeting: I ) Shri Nand Lal, Consultant, DIPP 2) Shri Shaish Kumar, Technical Expert (Consultan|, DGFT 3) Shri D.N. Mathur, Technical Expert (Consultant), DGFT 4) Shri Ashok Chander Bhatt, FTDO 2' Following are the decisions of the Norms Committee after deliberation and RA concemed shall take consequential action as per Foreign Trade Policy/Procedures: MANUAL CASES SuЦeCt: Fintion oF adhoc norms in respectof Advance Autho■レ2●on No. 3210078273 dated 25.102017. Decision:Based the wTitcn commcnts■■mished by the D/oC&PC宙detheir OM No.46011ノ55/2015-PC― Ⅱ dated 23.072015,thc Colllmittcc approved fo‖ owing adhoc no口ns: EXPORTIT EM QTY IⅣPORTITEM QTY Rubber Moulded Components Shed l kg Silicon Rubber (POWCrsil(R)26775C6いぅ 103 Kg RA mry t ke comequenthl action es per Policy / proceduros.

Subject: Reconsider for liration of sdhoc norms in respect ofAdvallce Autho劇レntioll No.0310801704

datcd l1 01.2016. Docislo■:Thc Commitee conSdcred the case“ pcr agenda (COnSultant 2) and decided to refer the matter to Tcchnical Expen 繭 鯰 脚1肥 動 o理 品饉 お壁111牌切

Case No.A‐ 50

M/s Sri Ramkarthic Polymcrs Pvt Ltd. HQ R No 01/87/050/00413/Am87DESVII Status: Appmved NC No.:11/AM19 Dated:19.07.2018 Adv Lic.No and Date 3210078273 dated 25.102017. RA IL No.32/24/040/110025/AM18

Case No.A‐ 51

lws Covestro (India) P\t. Ltd. HQ R No. 01/87/Oa1/1x1364/AM167DESVII stam: DeFerred NC No.:11/AM19 Dated:19.07.2018 Adv.Lic No and Date 0310801704dated l1 01 2016. RA R No.03/94/040/00555/AM16 聴亀覇高 `百 ,NeW Od“

Case No.A‐ 52

Ir,{/s S I Group hrt. Ltd. HQ R No. 01/87ノ050/00406/AM16』DESVII Status: Approved NC No.:11/AM19 Dated:19.07.2018 Adv Lic No and Date 0310802629dated16 02 2016 RA F.No.03/95/040/00865/AM16

Case No. A-53

M/s Lioyd lnsulations(Indial Ltd.,Ncw Delhi HQF.No. 01/87/050/00227ノA■l16/DES‐ VII Status: Dcferred NC No.:11/AM19 Dated:19.07.2018 Adv Lic No and Datc 0310797257 dated 15.07.2015 RA R No.03/95/040/00208/AM16 SubieCt Request For 3mendmentin the seHai number 2 ofimportitem. Decisioll:The Commitee considered the request ofthe nrm and decided thatthe descriplon oflmportitcm No 2 may bc re“ d as Meta Para Creso145(MP‐ Cresoa1 45)instCad Of M‐ Crcsol‐ 40(Meta Para Cresol‐ 40)in thC minutes of Mceting No 13 ofNonns Committee‐ VH which was hcld on 28 12 2016

Subject: Fixation of adhoc norms in respect of Advance Authorizrtion No, 0310797257 dat€d

15.07,20r5. Decision: The Comminee considered the case as pcr agenda and decidcd thst firm may deposit composition fcc of Rs.5000/- (Rupees Five thousand only) for consideration of their representation in the concemed RA from where the Advance Authorizarion was issued. subiect: Enhrncement in the qurntity allowed for Import Item - TAREC prR Ml-cR 50Kc/lvr3, HCFC FREE FOAM, BLOCK FOAM DIMENSION 2500 X 1000 X 570 MM against Advrnc€ Authorizrtion No. 0310793752 dated 10.02.2015. Decision: The Committee considered the case as per agenda and decided that lirm may deposit composition fee of Rs.5000/- (Rup€es Five thousand only) for consideration of their representation in the concemed RA from where the Advanc€ Authorization was issued.

Subject: Allowing the Import of Foamglass.

Decision: The Committee considercd the case as per agenda and decided that firm may deposit composition fee of Rs.5000/- (Rupees Five thousand only) for consideration of their representation in the concemed RA Aom where the Advancc Authorization was issued.

subject: Fkrtion of adhoc norms itr r€spect of Advance Authoriation No. 3410042239 dated

06.06.2016 ASHOK CHANDER BHATT

Case No.A‐ 54

M/s.Lloyd insulations(Indi→ Ltd,Ncw Dclhi HQ R No 01/87/050/OIX135/AM16/DESVII Statlls: Deferred NC No.:11/AM19 Datod:19.07.2018 Adv.Lic No and Date 0310793752 dated 10412.2015 RA F.No.03/95/040/00713/AM15

Case No.A-55

ヽ〃s.Lloyd lnsulations(Indial Ltd.,Ncw Delhi HQ R Nc 01r87/050/00226ノAm6rDESVII Status: DeFered NC No.:11/AM19 D3ted:19.0■2018 Adv.Lic.No and Datc 0310796888 dated 24.l16.2015 RA F.No.03/95ノ040/00140/AM16

Case No. A-55

M/s.Sabic lnnovativc Plastics hdia Pvt Ltd. HQ R No. 01/87/0511/111B84/AⅣⅡ8/DESVII Statls: Defered NC No.:11/AM19 Dated:1)0■2018 Adv.Lic.No.and Date 3410042239 dated 06.06.2016 RA F.No 34/24/040/110237/AM16 り ろ

3 Decision: The Committee considered the case as per agenda and decided that firm may deposit composition fee of Rs.5000/- (Rupees Five thousand only) for consideration of their representation in the concemed RA from where the Advance Authorization was issued. Online Cases No.:10/14/87‐ALC1/2014 Paty Namc:MRCICLEAN Mcet No/Datc:11/87‐ SYSTEMS PRIVATE LIMITED ALC1/2018 19.07.2018 i The committee noted that D/Ls dated 09.02.2017 and 22.09.2017 were issued by DGFT to firm and information has not been received so far. Thus, the Committee decided to rcjcct the case. Mcet No/Date:11/87‐ ALC1/2018 19.07.2018 )cision:The cOmmittee noted that D/Ls dated 07.03.2017 and 21.09.2017 were issued by DGFT to flrin and uisite infomation has not been received so far.Thus,the Committee decided to reFect the case. IMcet No/Date:11/87‐ status: DeFerred IALC1/2018 19.07.2018 : The committee considered the case as per agenda and decided to defer the matter. No.:1/10/87‐ ALC1/2016 Name:WEILBURGER TINGS(INDIA)PRIVATE ALC1/2018 19.07.2018 「QⅢ釧拗 "綱 23ムm7 File Lic.No/Date:0210206751 14.06.2016 /040/OCX139/AM17/ ni The committee noted that D/L dated 09.03.2017 and 22.09.2017 were issued by DGFT to firm and information has not been received so far. Thus, the Committee decided to reject the case. Lic.No/Date:0910060144 :01/87/050/00120/AM15ノ :09/24/040/00068/AM15/ No.:36/8/87‐ ALC1/2016 No。:37r14r87…ALC1/2016 PaりName:NAVRATAN ALTY CHEMICALS LLP Lic.No/Date:0810138106 106.06.2016 13oseN( 隔 、FTI'1 湖"m姉 畔 淵"EI濶 面¨ “Ю "0独m7 陽λ淵∽的 9ハm″ 1蹴鼎α固“ %%0 )n: Based On thc examination of the case of flHm by Technical Expert(Consultal ,0/00207/AM17,the Cominittee decided to approve folowhg ad‐ hoc norlns■ App ― | lt{DNM.})in roved FIc No. EXPORT ITEM QTY I「肛PORT ITEM QTY ADMIXTURES (P01yCarbOxylate based plasticizer containing NLT 57%PCE based Polymer) 1250 MT 1.PCE BASED POLYMER 600 MT 2。SODILIM GLUCONATE 62.5 MT 3.DEFOAMER 1.25 MT RA mry teke consequentiel action es per Policy / procedurcs ASHOK CHANDER BriバiI Forelgn Trade DeVelopment Ofic=「 W器 翻 爛 111:酬 e Utt Bhawan,New Delhi

4 No.:36/13/87…ALC1/2016 PTりNalne:NIKISU FINE No/Date:11/87‐ HEMICALS PVT.LTD LC1/2018 19,07.2018 |:」:」)311le:0310806728 Decision: The Committee considered the case as per agenda and decided to defer the matter. ase No.:37/15/87‐ ALC1/2016 Name:MACRO Meet No/Date:11/87‐ YMERSP.LTD. 1/2018 19.07.2018 File:01/87/050/00430/AM17/ RLA Fllo :08/24/040/00230/AM17/ No/Date:0810138616 i The committee considered the case as per agenda and decided to defer the matter. Meet No/Date:11/87‐ IALC1/2018 19.07.2018 Lic.No/Date:0810138629 r : The Committee considered the case as per agenda and based on technical comments of D/o C&pC vide OM No. 4601 112012009'PC-ll dated04.02.2015, decided to apDrove followins nonns :- ALC1/2018 19,07.2018 HQ File:01/87/050/00531/AM17/ RLA File :03/94/040/00686/AM17/ Personal Hcaring must be technical and production persOns who are wen versed with the case, DecisiOn:The cOmmittee cOnsidered the casc as per agenda and based On technical cOmments of D/oC&Pc nttmished vide(DM No.‐ 46011/20/2009‐ PC‐ II dated 27.12.2013,decided to approve fol10wing norlns:_ 1譜∬淵1° 0310808908 l聯鞭椰咄畳Eil鎚岬鞘1串暇鶴柵蹴肌織 翻轟脳暉F Minislry'OrcOmmerce&!n

Case No.:40/14/87¨ ALC1/2016

P田りNalne:MACRO lStatus: Approved POLYMttRS P.LTD. :01/87/050/00373/AM17/ :08/24/040/00208/AM17/ Attd Resin S¨ 5060HP {Resin content 70+た2%} 3.Mineral Turpentine Oi1/Low Aromatic White Spirit (LAWS) RA may take consequential action as per policy / procedures.

Case No. : 4/l 6 187 - ALCL ft0[ 6

Party Name: G+HLIZ INDIA PRIVATE LIM1lED

Case No. :84/15t87 -ALCL n0[;6 P田りNalne:MACRO

POLYMERS P.LTD. Mcet No/Date:11/87‐ Status: Approved :01/87/050/00477/AM17/ :0810139334 19.12.2016 File:01/87/050/00311/AM17/

Alkyd Resin‐ S‐5035 LV(701/‐ 2%Resin Content) 1.Distilled Fatty Acid 2. Phthalic Anhydride 0.315 kg RA may takc consequcntirrl action es per Policy / Procedures.

Case No.:85ノ15/87-ALC1/2016

P田りNamc MACRO POLYMERSP.LTD. ect No/Datell 1/87‐ 1/2018 19.07.2018 File :01/87/050/00478/AMl7/ IRLA File ic.No/Date:0810139386 :08/24/040/00368/AM17/ Decision: The Committee considered the case as per agenda and based on technical comments of D/o C&PC furnished vide OM No. -4601 ll20/2009-PC-II dated 15.12.201l, decided to approve following norms ;- EXPORT ITEM QTY IMPORTITEM QTY Alkyd Resin C‐ 1030(Resin Content 70%) l kg

1. Distilled Fatty Acid 0.204 kg
2. Phthalic Anhydride 0.319 kg
3. Glycerin 0.215 kg
4. Xylene 0.315 kg RA may takc consequcntial action as pcr Policy / Procedures. Mcet No/Date:11/87‐ ALC1/2018 19.07.2018 No/Date:11/87‐ 1/2018 19.07.2018 HQ File :0t/87t050/00ss3/AMt?t lRLa pile :03/95/040/00765/AM17ノ ! The Committee observed that firm has not replied to DL issued to them and decided that a final reminder be issued to the firm by post. Name:SI GROUP‐ INDIA No/Date:11/87‐ LC1/2018 憫翻聯 No。:86ノ15/87‐ALC1/2016 POLYMERS P.LTD。 File :0 l/87/05 0/00479/ AMtTl Inta rite Lic.No/Date:0810139387 EXPORT ITEⅣE QTY IMPORTITEM QTY Alkyd Resin C‐ 1030(Resin Content 70%) l kg
5. Distilled Fatty Acid 0.204 kg
6. PhthaHc Anhydride 0.341 kg
7. Glycerin 0.234 kg 4, Toluene 0。315 kg RA may take consequcntial action as pcr policy / procedures. PRIVATE LIMITED Lic.No/Date:0310810195 29。12.2016 No.:27r16/87…ALC1/2016 VATE LIMITED UttBml=New面 The Committee considered the case as per agenda and based on technical comments of Olo CApC vide OM No. -4601l/2012009-PC-II dated 27.l2.2}l3,decided to approve following norms :- No.:26l16/87-ALClnOrc lParty Name: SI GROUP - fNDIA

| 「 QⅢ抑 拗"畑"4ハm7障 分監∽ "“Am7 ! The Committee observed that firm has not replied to DL issued to them and decided that a final reminder be issued to the firm by post. Mect No/Date:11/87‐ ALC1/2018 19.07.2018 LicoNo/Date:0810139822 02.03.2017 n : Commiffee discussed the case and decide to defer the case. Mcet No/Date:11/87‐ IPOLYFTLMS (rNDrA) pVT. lelcVzora RLA File :03/95/040/00127/AM16/ Lic.No/Date:0310811717 108.03.2017 : The Comminee considered the case as per agenda and decided to approve following ad-hoc norms:- EXPORT ITEM QTY I「燿PORT ITEPI QTY POLYPROPYLENE PROTECTIVE FILM 200000 Kg LDPE GRANULES 32634kg LLDPE GRANULES 9166kg POLYPROPYLENE GRANULES 110000kg POLYISOBUTYLENE/ POLYISOBuTENE 7516kg ETHYL VINYL ACETATE(EVA) 14677kg POLYPROPYLENE COPOLYMER 43633kg RELEVANT ADDITIVE 2384kg RA may take consequential action as pcr policy / procedures No.:42/1/87‐ ALC1/2017 Name:MACRO YMERSP.LTD. Lic.No/Date:0810139864 10.03.2017 ion: The Committee considered the case as per agenda and decided issue deficiency letter to the authorization for submission ofthe following information. ) Technical desoiptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed- manufacturing process along with technicallustincation for-wastages claimed at each sLge ana each of he materials required in the manufacturing process. ') chemical name, Technical specifications of items proposed to be imported. Wtether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use y be furnished. If the scrap is being sold, the sale vilue/commercial value may be indicated. Material balance indicating calculative statement of the requirement of each of item for manufacture of each of port product, 「 整1:2ド鋸43/287‐ ALCttm7 L空 里1,α TECANDUSTШ ES tteaNoわ江αl187‐

卜籠u説 | ASHOK CttDER BH籠 Foreign Trade Developrnent Officer Dlector4e General ol Fore'rgn Trade Ministry of Cornmerce & lndustry Udyog Btuwan, Nar Delhi Irs.oz.zorr LicoNo/Date:0310810194 29.12.2016 No.:40/1/87‐ ALC1/2017 Party Name: MACRO YMERS PoLTD. File:01/87/050/00040/AM18/

Case No.:68/2/87‐ ALC12017

:01ノ87/050/00125/AM18/ Mcct No/Datc:11/87‐ 6

¬
「

f
: The committee considered the case as per agenda and decided to defer the matter as firm wants time to
tu
ASHOK C}IANOER BHAN
Foaln Trde Dewlopment Ofiicer
Dtecbr{e General of Foreign Trade
Ministry of Comnerce & lndustry
Udyog Bhawan, New DelN
Casc N“
"/87-ALα側"  
鵬紐"~
棚
児5∽∝郎ハmν  
脇
鵬
0畑bttm7 1器
器
α
“
ЮЫ
""
Decision:Based on the technical comments imished by DIPP宙
e their communication N(
rsw dated o4.07.2018,cominittee decided to approve foHowing adhoc noHms:‐
―
|
).7/126/2018(Pt.)‐
Export ltem
QTY
鉱
Ｎ
。
Description
QTY
L New Pneumatic
Tyres of Rubber, Of a
100 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(
RSS)
12.826
kind used on Buses or
Lorries : Radials -
Nylon and Steel Belt.
(Total Quantity to be
exported 5,000.00
kgs)
2
NATURAL RUBBER‐ TECHNICALLY
SPECIFIED NATURAL RUBBER(TSNR)
14.829
SYNTHETIC RUBBER:BUTADIENE
RUBBER(BR)
10。717
4
SYNTHETIC RUBBER:STYRENE
BUTADIENE RUBBER SBR‐ 1500/1502
6.803
SYNTHETIC RUBBER:OIL EXTENDED
STYRENE BUTADIENE RUBBER SBR‐
1712/1723/1783
1.658
19
9
CARBON BLACK
26.521
10
NYLON TYRE CORD FABRIC(DIPPED)
3.589
RUBBERISED TEXTILE FABRIC NYLON
CHAFER FABRIC(DIPPED)
0.088
STRANDED WIRE,ROPES AND CABLES
(BRASS COATED STEEL TYRE CORD)
8.889
14
WIRE OFIRON OR NON‐ ALLOY STEEL
OF A THICKNESS ABOVE 18 SWG BUT
UP T0 26SWG(BRONZE COATED
TYRE BEADWIRE)
2.877
RUBBER CHEMICAL:ANT10XIDANTS
TMQ/TDQ/HS
0.413
16
1.262
17
RUBBER CHEMICAL:ACCELERATOR
0.591
RUBBER CHEMICAL:RETARDERS
0.105
19
ZINC OXIDE
1.887
20
STEARIC ACID
0.765
21
MICROCRYSTALLINE PETROLEUM
WAX
0.656
23
RAE(Reddual Aromatic Ex"act)OIL OR
SIMILAR PRODUCTSIN WHICH THE
WEIGHT OF THE AROMATIC
CONSTITUENTS EXCEEDS THAT OF
3.565
7
IDeFerred
HQ Flle:01/87/050/00100/AM18/
RLA File
102/24/040/00261/AM17/
1躙器α口""の
3

THE NON AROMATIC CONSTITUENT,
USED AS PLASTICISERS AND ALSO
KNOWN AS RUBBER PROCESS OIL.
う
ι
PHENOLIC TACKIFIER RESIN
0.599
26
INSOLUBLE SULPHUR
0.700
28
AGEING RESISTANCE CHEMICAL
(PERKALINK‐ 900/HVA‐ 2)
0.140
29
AGEING RESISTANCE CHEMICAL
(HTS)
0.127
30
PROCESSING ADDITIVES
0.539
HOMOGENIZING AGENT
0.536
32
COBALT BORON COMPLEX‐ COBALT
22.5%(MONO BOND)
0.034
MOULD RELEASE PREPARATION
(INSIDE RELEASE)
0.190
34
MOULD RELEASE PREPARAT10N
(OUTSIDE RELEASE)
0。160
BLADDERS
0.020
36
ANTITACK RELEASE PREPARATION
(RUBBER COMPOUND RELEASE)
0.200
101.286
Export Item
QTY
鉱
Ｎ
。
Description
QTY
2. New Pneumatic
Tyres of Rubber, Of a
kind used on Buses or
Lorries : Other Bias -
Nylon. (Total Quantity
to be exported
30,000.00 kgs)
I 00 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(
RSS)
17.148
2
NATURAL RUBBER‐ TECHNICALLY
SPECIFIED NATURAL RUBBER(TSNR)
18.008
SYNTHETIC RUBBER:BUTADIENE
RUBBER(BR)
9.614
4
SYNTHETIC RUBBER:STYRENE
BUTADIENE RUBBER SBR‐ 1500/1502
1.670
9
CARBON BLACK
24.005
10
10.922
RUBBERISED TEXTILE FABRIC NYLON
CHAFER FABRIC(DIPPED)
0.177
12
POLYESTER TYRE CORD FABRIC
(DIPPED)
0.031
14
WIRE OFIRON OR NON‐ ALLOY STEEL
OF A THICKNESS ABOVE 18SWG BUT
UP T0 26SWG(BRONZE COATED
TyRE BEADWIRE)
4.057
RUBBER CHEMICAL:ANT10xIDANTS
TMQ/TDQ/HS
0.322
16
1.136
RUBBER CIIEMICAL:ACCELERATOR
0.469
0.H6
19
ZINC OXIDE
1.947
20
STEARIC ACID
1.124
０
０

21
MICROCRYSTALLINE PETROLEUM
WAX
0.615
PRECIPITATED SILICA
0。783
RAE(Residual Aromatic Extract)OIL OR
SIMILAR PRODUCTSIN WHICH THE
WEIGHT OF THE AROMATIC
CONSTITllENTS EXCEEDS THAT OF
THE NON AROMATIC CONSTITIIENT,
USED AS PLASTICISERS AND ALSO
KNOWN AS RUBBER PROCESS OIL.
4.838
う
ι
0.158
26
INSOLUBLE SULPHUR
0.148
30
0.493
MOULD RELEASE PREPARAT10N
(INSIDE RELEASE)
0。190
34
MOULD RELEASE PREPARATION
(OUTSIDE RELEASE)
0.160
BLADDERS
0.020
36
ANTITACK RELEASE PREPARAT10N
(RUBBER COMPOUND RELEASE)
0.200
98。351
Erport Itcm
QTY
鏃
Ｎ
。
Dcscription
QTY
3. New Pneumatic
Tyres of Rubber, Of a
kind used on
agricultural or forestry
vehicles and
machines, A. Bias -
Nylon. (TotalQuantity
to be exported
4,875,000.00 kgs)
100 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(
RSS)
3.238
NATURAL RUBBER‐ TECHNICALLY
SPECIFIFDNATURAL RUBBER(TSNR)
26.612
3
SYNTHETIC RLIBBER:BUTADIENE
RUBBER(BR)
3.019
4
SYNTHETIC RUBBER:STYRENE
BUTADIENE RUBBER SBR‐ 1500/1502
4.263
SYNTHETIC RUBBER:OIL EXTENDED
STYRENE BUTADIENE RUBBER SBR‐
1712/1723ノ1783
8.702
9
CARBON BLACK
27.113
10
6。775
RUBBERISED TEXTILE FABRIC NYLON
CHAFER FABRIC(DIPPED)
0.102
POLYESTER TYRE CORD FABRIC
(DIPPED)
0.003
14
WIRE OFIRON OR NON‐ ALLOY STEEL
OF A THICKNESS ABOVE18 SWG BUT
UP T0 26SWG(BRONZE COATED
TYRE BEADWIRE)
3.367
TMQ/TDQ/1S
0.482
16
0.947
17
0.484
0.102
19
ZINC OXIDE
1.810
20
STEARIC ACID
1.024
ASHOK
僻
udyOg Bhawan,New Deihi
9

10
MICROCRYSTALLINE PETROLEUM
WAX
0850
PRECIPITATED SILICA
0003
RAE(Residual Aromatic Extract)01L OR
SIヽ41LAR PRODU∝SIN WHICH THE
WEIGHT OF THE AROMATIC
CONSTITUEN rS EXCEEDS THAT OF
THE NON AROMATIC CONSTITUENT,
USED AS PLASTICISERS AND ALSO
KNOWN AS RUBBER PROCESS OIL
PHENOLIC TACKIFIER RESN
0217
26
INSOLttLE SULPHUR
0129
0568
HOMOGENIZNC ACENT
0.001
MOULD RELEASE PREPA RAT10N
…
ヽS助
0190
MOULD ttLEASE PREPARAT10N
…
0160
BLADDERS
0020
ANTITACK RELEASE PREPARATION
(RUBBER COMPOIJND RELEASE)
0200
94.666
Erport ltcm
QTY
駐
Ｍ
Dascriptiotr
QTY
4. New Pneumatic
Tyrcs ofRubber, Ofa
kind used on
ag cultural or forestry
vehicles and
machines, B. Radial s -
Nylon and Polyester,
Polyester. (Total
Quantity to be
cxported 5,005,000.00
kgs)
100 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(RSS)
9552
2
NATURAL RUBBER― TECHNICALLY SPECIFIED
yTURAL RUBBER(TSu)
17345
3
UTADIENE RUBBER(BR)
12222
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
RUBBER SBR‐ 1500/1502
10014
SYNTHETIC RUBBER:0:L EXTEhlDED STYRENE
BUTADIENE RUBBER SBR‐ 1712/1723/1783
1494
CARBON BLACK
29443
10
NYLON TYRE CORD FABRIC (DIPPED)
2096
RUBBERISED TEXTlLE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0055
つ
‘
FABRIC(DIPPED)
2882
14
WIRE OFIRON OR NON‐ A…
THICKNESS A30VE 18 SWG BUT uP To 26SWG
(B80NZE COATED TYRE BEADWIRE)
2896
|…
0468
16
1352
0685
0127
19
ZINC OXIDE
1808
20
STEARIC ACID
0886
MICROCRYSTALLINE PETROLEUM wAX
0879
ASI10К  C田漏条〒%

23
RAE(Residual Aromatic Extraco 01L OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
THE NON AROMATIC CONSTITUENT,USED AS
PLASTICISERS AND ALSO KNOWN AS RUBBER
PROCESS OIL.
4.144
25
0.658
26
INSOLUBLE SULPHUR
0.500
30
0.578
HOMOGENIZING AGENT
0.452
MOULD RELEASE PREPARAT16N(INSIDE
聾LEASE)
0.190
34
MOULD RELEASE PREPARA
RELEASE)
0.160
BLADDERS
0.020
36
ANTITACK RELEASE PREPARATION(RUBBER
COMPOUND RELEASE)
0.200
101.106
Export Item
QTY
鉱
Ｎ
。
Description
QTY
5. New Pneumatic
Tyres of Rubber, Of a
kind used on
agricultural or forestry
vehicles and
machines, C. Nylon
and Steel Belt. (Total
Quantity to be
exported 565,000.00
kgs)
I 00 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(RSS)
12.053
2
NATURAL RUBBER‐ TECHNICALLY SPECIFIED
NATURAL RUBBER(TSNRp
15.155
SYNTHET:g RUBBER:BUTADIENE RUBBER(BR)
9。869
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
8.254
SYNTHETIC R
_⊇JTADIENE RUBBER SBR‐
1712/1723ノ1783
1.151
9
CARBON BLACK
2`。772
10
4。226
RUBBERISED TEXTILE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0.041
7.851
14
WIRE OFIRON OR NON‐ ALLOY STEEL OF A
THICKNESS ABOVE 18 SWG BUT uP To 26 SWG
rRONZE COATED TYRE BEADWIRE)
3.143
TDQ/詭
CHEMCAL AN■0測DANTS TMQ/
0.382
16
RUBBER CHEMICAL:ANTIOXIDANTS
1.308
17
0。606
0.099
19
ZINC OxIDE
1.833
20
STEARIC ACID
0.774
21
MICROCRYSTALLINE PETROLEUM WAX
0,761
23
RAE(Residual Aromatic Extraco OIL OR SIMILAR~
PRODUCTSIN WHIcH THE WEIGHT oF THE
AROMATIC coNSTITuENTS EXCEEDS THAT OF
f塁旦NON AROMATIC CONSTITuENT.UsED AS
3.571
ASHOK
僻
udyOg Bhawan:New Delhi

う
乙
PROCESS OIL
0656
26
rNSOLUBLE SULPHUR
0569
ACEING RESISTANCE CHEMICAL(PERKALIblK‐
900ノHVA‐ 2)
0128
ACEING RESISTANCE CHEMICAL(HTS)
0116
30
0588
HOMOGENIZrNG AGENT
0556
COBALT BORON COMPLEX‐ COBALT 22 5%
(MONO BOND)
0031
MOULD RELEASE PREPARAT10N(NSIDE
RELEASE)
0!90
34
MOULD RELEASE PREPARAT10N(OUTSIDE
_8ELEASE)
0160
BLADDERS
0020
36
8ぶ艦
鵬
難
:繁ギ
PARtt10N IRUBBER
0200
101.063
Expolt ltcm
QTY
Ｓ
ｒ
．
恥
DcscrlDtion
QTY
6 New Pneumatic
Tyres ofRubber,Ofa
kind used on
agricultural or Forestry
vchicles and
machincs,D Radials―
A‖ Steel(Total
Quan“ ty to be
exported 2,00000
kgs)
I00 kgs
1
NATURAL RYBBER‐ SMOKED SHEETS(RSS)
28306
2
NATURAL RUBBER(TsNR)
8444
3
§YNTHE■C RUBBERBUTADIENE RUBBER oR)
2010
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
3692
HALO BuTYL RUBBER‐ CHLORO juTYL
RUBBER(CH助/8ROMO BuTYL RUBBER(BHRl
2551
9
CARBON BLACK
21 197
EPCABLESGRASS
15817
14
WlRE OFIRON OR NON‐ A
THiCKNESS A30VE18 SWG BUT uP To 26 SWG
IBRgNzE COATED TYRE BEADwIRE)
5009
1498
17
0612
0001
!9
ZINC oxIDE
20
STEARIC ACID
O131
MICROCRYSTALLINEPETJOLEUNI WAX
0528
22
PRECIPITATED SlLICA
1836
RAE(Residual Aromatic Extract)OIL OR SIMILAR~
PRODUCTsIN WHIcH THE WEICHT oF THE
M熙祠鮒:濶
PROCESS OIL
0309
鰈
僻
Udyog Bhawan.New Ddh

つ
，
24
PETROLEUM TACKIFIER RESN
0765
0777
INSOLUBLE SULPHUR
0908
27
SILANE COUPLNG ACENT
ACEING RESISTANCE CHEMICAL(PERKALNK‐
900′ HVA‐2)
1009
29
ACEING RESISTANCE CHEMICAL(HTS)
0428
0457
HOMOGENIZINC AGENT
2158
COBALT BORON COMPLEX‐ COBALT 22.5%
(MONO BOND)_
0116
MOULD RELEASE PREPARAT10N(NSIDE
型丑聖pD
0190
34
MOULD RELEASE PREPARAT10N(OUTsIDE
RELEASE)   __
0160
BLADDERS
0020
ANTITACK RELEASE PREPARAT10N(RUBBER
COMPOUND RELEASE)
0200
101.6110
Erpod Itcm
QTY
Ｓ
ｒ
．
恥
Descrlptlotr
QTY
1
…
UBBER‐SMOKED SHEETS(RSS)
13331
2
pD
22340
3
SYNTHETIC RUBBER:BUTADIENE RUBBER(BRl
3081
4
SYN「HETIC RUBBERISTYttNE BUTADIENE
8763
1 173
ti奪電
R3:璽k(菖助
0236
9
CAR30N BLACK
26768
lo 
J 
NYLON TYRE CORp FABRTC (DrppED)
7970
RUBBERISED TEXTILE FABRIC NYLON CHAFER
0084
12
POLYESTERTYREC9RD FABRIC(DIPPED)
0134
WIRE OFIRON OR NON‐ ALLOY STEEL OF A
THICKNESS A30VE 18 SWG BUT uP To 26 SWG
J,RONZE COATED TYRE BEADWIRE)
2991
]:alllCIEMICAL:ANT10X10ANTS TMQ/
0555
0998
0533
0112
19
ZINC OXIDE
1930
20
STEARIC ACID
1068
MICROCRYSTALLINE PETROLEUM wAX
0801

14
22
PRECIPITATED SILICA
0.139
23
RAE(Residual Aromatic Extract)OIL OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL.
3.714
24
PETROLELIM TACKIFIER RESIN
0.002
25
0.550
26
INSOLUBLE SULPHUR
0.163
27
SILANE COUPLING AGENT
0.004
28
AGEING RESISTANCE CHEMICAL(PERKALINK‐
型
vA‐2)
0.001
30
0.481
HOMOGENIZING AGENT
0.050
MOULD RELEASE PREPARAT10N(NSIDE
RELEASE)
0.190
34
MOULD RELEASE PREPARATION(OUTsIDE
RELEASE)
0.160
BLADDERS
0.020
36
ANTITACK RELEASE PRE'ARATION(RUBBER
ASE)
0.200
98.542
Export ltem
QTY
鉱
Ｎ
。
Description
QTY
8. New Pneumatic
Tyres of Rubber, Of a
kind used on
consffuction, mining
or industrial handling
vehicles and
machines, B. Radials -
All Steel. (Total
Quantity to be
exported 710,000.00
kgs)
100 kgs
1
NATURAL ttvBBER‐ SMOKED SHEETS(RSS)
18.123
2
NATURAL RUBBER(TSNR)
11.279
3
SYNTHETIC RUBBER:ByTADIENE RUBBER(BR)
2.689
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
13.893
HALO BUTYL RUBBER‐ CHLORO BUTYL~~~~
ROMO BuTYL RllBBER(BHRヽ
1.804
9
CARBON BLACK
24.175
10
0.001
RUBBERISED TEXTILE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0.057
12
POLYESTER TYRE CORD FABRIC(DIPPED)
0.002
10.989
14
WIRE OFIRON OR NON‐ ALLOY STEEL OF A
THICKNESS ABOVE 18SWG BUT uP To 26 SWG
幽
NZF COATED TYRE BEADWIRE)
2.924
J8,聰
CHEMC面画
面
画
面
0.302
16
RUBBER CHEMICAL:ANT10xIDANTS
1.534
0.728
0.012
19
ZINC OXIDE
2.434
ASHOK CHANDER BHA可

ξ
υ
STEARIC ACID
0317
MICROCRYSTALLIhlE PETROLEUM WAX
0663
PucIPITATED SILiCA
1877
RAE(Residual Aromatic Extract1 01L OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATiC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL
1530
24
PETROLEUM TACKIFIER RESN
0548
PHENOLIC TACKIFIER RESN
0757
26
NSOLUBLE SULPHUR
0726
27
SILANE COUPLING ACENT
0309
ACEING RESISTANCE CHEMICAL(PERKALINK‐
900/HVA‐ 2)
0738
29
AGEING RESISTANCE CHEMICAL(HTS)
031!
30
PROCESSING ADDITiVES
0419
HOMOGENIZNG ACENT
1462
COBALT BORON COMPLEX‐ COBALT 22 5%
【MONO BOND)
0079
MOULD RELEASE PREPA RATION(lNSIDE
_ILEttL」  
⊇∠塾≦ユ
ELと_________― ――――――――
0190
34
MOULD RELEASE PREPA RAT10N(OUTsIDE
0160
BLADDERS
0020
36
列
搬
:翠
PARA■釧emBER
0200
101.252
Erport Itcm
QTY
Ｓ
ｒ
．
Ｎ
。
Dcscriptlotr
QTY
9, New Pneumatic
Tyres ofRubber, Ofa
kind used on
constuction, mining
or industrial handling
vehicles and
machines, C. Radials -
Nylon and Polyester.
(Total Quantity to be
exported 45,000.00
kgs)
100 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(RSS)
9690
2
NATURAL RUBBER(TSNR)
17545
3
…
R:BUTADIENE RUBBER(BR)
10561
4
SYNTHETIC RUBBER:STYRENE BuTADIENE
RUBBER SBR-1500/1502
10586
5
SYNTHETIC RUBBER:OIL EXTENDES STVffi
BUTADIENE RUBBER SBR- I?12 I 1723 I 1783
1487
9
CAR30N BLACK
29163
3595
11
RUBBERISED TEXTILE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0053
堅
IE2EFRIFcom FABttC oPPEDl
2941
WIRE OFIRON OR NON‐ ALLOY STEEL OF A
THICKNESS ABOVE 18 SWG BUT UP To 26SWG
(BRONZE COATED TYRE BEADWIRE)
2949
鶏,詭CHEMFALハ両面
画
面
0474
ASHOK
鵬網酢
Udoq thanEn, New Dethi

16
RAE(Rcsidual Aromatic Extract)01L OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
MOULD RELEASE PREPARAT10N(INSIDE
MOULP RギLEASE PREIŨ
ANTITACK RELEASE PREFAR A1'ibN
Tyres OfRubber,ofa
kind used On
consmctiOn,mining
or industrial handling
vchiclcs and
machines,D.Nylon
and Stecl BeL(To●1
Quantity to be
exported 75,00000
kgs)
100 kgs
NATURAL RUBBER‐ SM9KED SIIEETS(RSS)
NATURAL RUBBER ( TSNR)
SYNTHETIC RUBBERIBPTADIENE RUBBERIBD
SYNTHETIC RUBBER:STYRENE BUTADIENE
SYNTHETIC RUBBER:oIL TxTeNbEd
JRSBR‐ 1712/1723/1
HALO BUTYL RUBBE…
RUB B ERI SED TEXTILE MBPJ_C
SIttN21DWl呼,R
WIRE OFIRON OR NON‐ ALLOY STEEL OF A
THICKNESS A30VE 18 SWG BUTuP To 26 SWG
RUBBER CHEMICAT, :etTIoXiDINrS
RUBBER CHEMICAL:ANT10測DANTS
辮鍮響僻
Udyog Bh― n,New Delhl

17
0099
19
ZrNC OXIDE
1881
20
STEARIC ACID
0837
り
´
MICROCRYSTALLNE PETROLEUM WAX
0796
RAE(Rcsidual Aromatic Extracth OIL OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL
3516
PETROLEUM TACKIFIER RESN
0093
0573
26
NSOLUBLE SULPHUR
0553
AGEING RESISTANCE CHEMICAL(PERKALIplK―
900′ HVA‐2)
0110
29
AGEING RESISTANCE CHEMICAL(HTS)
0100
30
0397
HOMOGENIZNG ACENT
0156
COBALT BORON COMPLEX‐ COBALT 225%
“
ON0 30ND)
0026
MOULD RELEASE PREPARAT10N(INSIDE
RELEASE)
0190
34
MOULD RELEASE PREPARAT10N(OUTSIDE
RELEASE)
0160
BLADDERS
0020
ANTITACK RELEASE PREPARAT10N(RUBBER
COMPOUND RELEASE)
0200
101.082
Erport Itcm
QTY
驚
Ｎ
。
Dcscription
QTY
I l. New Pneumatic
Tyres ofRubber,
Other, A. Bias -
Nylon, Nylon and
Ammide. (Total
Quantity !o be
exported 275,000.00
kes)
100 kgs
1
NATURAL RUBBER‐ SMOKED SHEETS(RSS)
3744
2
NATURAL RUBBER(TSNR)
30621
3
SYNTHETIC RUBBER:BUTADIENE RUBBER(BR)
4026
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
2150
5
SYNTHETIC RUBBER:01L EXTENDED STYRENE
…
RUBBER SBR‐ 1712/1723/1783
7251
9
CARBON BLACK
25543
10
5900
RUBBERISED TEXT:LE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0096
14
2446

０
０
RUBBER CHEMICAL:ANT10XIDANTS TMQ/
TDo/HS
0465
RU8BER CHEMICAL:ANT10XIDANTS
1009
0413
0095
19
ZINC OXIDE
2146
20
STEARIC ACID
1 151
0820
PRECIPITATED SILICA
0852
RAE(Residual Aromatic Extraco OIL OR SIMlLAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL
3874
PHENOLIC TACKlFIER RESIN
0344
26
INSOLUBLE SULPHUR
0089
30
0.714
HOMOGENIZNG ACENT
0001
MOULD RELEASE PREPARAT10N(NSIDE
RELEASE)
0190
MOULD RELEASE PREPARAT10N(OUTSlDE
RELEASE)
0160
BLADDERS
0020
36
ANTITACK RELEASE PREPARAT10N(RUBBER
COMPOUND RELEASE)
0.200
94320
Export ltcm
QTY
Ｓ
ｒ
．
Ｎ
。
Dcscriptiotr
QTY
I2. New Pneumatic
Tyres ofRubber,
Other, B. Radials -
Nylon and Polyester.
(Total Quantity !o be
exported 7,000.00
kgO
100 kgs
l
NATURAL RUBBERoSMOKED SHEETS(RSS)
13 156
NATURAL RUBBER(TSNR)
14041
3
SYNTHETIC RUBBER:BUTADIENE RUBBER(3R)
11243
4
SYNTHETIC RUBBER:STVTENE BUTADIENE
RUBBER SBR‐ 1500/:502
6970
5
SYNTHETIC RUBBER:OIL EXTENDED STYRENE
BUTADIENE RUBBER SBR‐ 1712/1723/1783
1913
9
CAR30N BLACK
10
2259
RUBBERISED TEXTILE FABRIC NYLON CHAFER
FABRIC(DIPPED)
0072
STRANDED WIRE,ROPES AND CABLES(BRASS
COATED STEEL「YRE CORD)
9077
WlRE OFIRON OR NON― ALLOY STEEL OF A
THICKNESS ABOVE 18 SWG BUT UP T0 26 SWG
oONZE COATED TYRE BEADWIRE)
2612
RUBBER CHEMlCAL:ANT10XIDANTS TMQ/
TDQ′ HS
0385
16
1393
嘲
響::酬
e
Utt Bh― n,Ntt De hi

19
17
0.624
0.101
19
ZINC OXIDE
1.879
20
STEARIC ACID
0.783
21
0,757
22
PRECIPITATED SILICA
0.066
23
RAE(Residual Aromatic Extract)OIL OR SIMILAR
PRODUCTSIN WHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL.
3.541
25
0.660
26
INSOLUBLE SULPHUR
0。624
28
AGEING RESISTANCE CHEMICAL(PERKALINK‐
900ノHVA‐ 2)
0.143
29
AGEING RESISTANCE CHEMICAL(HTS)
0.130
30
0.610
HOMOGENIZING AGENT
0.612
32
COBALT BORON COMPLEX‐ COBALT 22.5%
(MONO BOND)
0.035
MOULD RELEASE PREPARAT10N(INSIDE
RELEASE)
0.190
34
MOULD RELEASE PREPARAT10N(OUTSIDE
RELEASE)
0。160
BLADDERS
0.020
36
ANTITACK RELEASE PREPARATION(RUBBER
COMPOUND RELEASE)
0.200
101.189
Export Item
QTY
出
Ｎ
。
Description
QTY
13. Solid Rubber
Tyres for Motor
Vehicles. (Total
Quantity to be
exported 150,000.00
kgs)
100 kgs
2
NATURAL RUBBER(TSNR)
50.649
SYNTHETIC RUBBER:BUTADIENE RUBBER(BR)
5.063
4
SYNTHETIC RUBBER:STYRENE BUTADIENE
0.144
5
SYNTHETIC RUBBER:OIL EXTENDED STYRENE
BUTADIENE RUBBER SBR‐ 1712/1723/1783
0.759
9
CARBON BLACK
32.343
14
WIRE OFIRON OR NON… ALLOY STEEL OF A
THICKNESS ABOVE 18SWG BUT UP T0 26 SWG
(BRONZE COATED TYRE BEADWIRE)
1.273
RUBBER CHEMICAL:ANT10XIDANTS TMQ/
TDO/HS
0.552
16
0.897
17
0.861
0.171
ASHOK C

20
19
ZINC OXIDE
2819
20
STEARIC ACID
1101
0009
PRECIPITATED SILICA
0321
RAE(Residual AromatたExtract)01L OR SIMILAR
PRODUCTSINヽVHICH THE WEIGHT OF THE
AROMATIC CONSTITUENTS EXCEEDS THAT OF
PROCESS OIL
1556
24
PETROLEUM TACKIFIER RESN
0012
PHENOLiC TACKIFIER RESIN
0343
26
NSOLUBLE SULPHUR
0492
SILANE COUPLNG AGENT
0030
99395
Export lteltl
QTY
鉱
Ｍ
Dcacriptiotr
QTY
14. Inner tubes of
nrbber Ofa kind used
on molor cars
(including starion
wagons and racing
cars), buses or lonies :
For lories and buses,
(Total Quantity to be
€xponed 2,000.00
kgs)
100 kgs
7
ISOBUTYLENE‐ ISOPRENE(3UTYL)RUBBER
(HR)
42116
8
ETHYLENE‐PROPYLENE NON‐ CONJUGATED
DIENE RUBBER(EPDM RUBBER)
7705
9
CARBON BLACK
32502
17
1240
19
ZINC OXIDE
2084
20
STEARIC ACID
0446
21
0496
PHENOLIC TACKIFIER RESN
0496
87.085
Erport ItaD
QTY
鉱
Ｍ
Dcscriptioo
QTY
15. Inner tubes of
rubber Other : For off
the road vehicles, not
elsewhere specified or
included. (Tool
Quantity to be
€xported 27,000.00
kgs)
I00 kgs
6
HALO BUTYL RUBBERoCHLORO BUTYL
RUBBER(CHR)/BROMO BUTYL RUBBER(BHR)
1935
ISOBUTYLENE・ISOPRENE(BUTYL)RUBBER
(1lR)
42041
ETHYLENE‐PROPYLENE NON‐ CONJUGATED
DIENE RUBBER(EPDM RUBBER)
6980
CAR30N BLACK
32552
1257
ZINC OXIDE
2113
20
STEARIC ACID
0.452
0343
0503
ASHOK C

21
88。176
Export Item
QTY
鉱
Ｎ
。
Dcscrlption
QTY
I 6. Inner tubes of
rubber Other : For
Tractors : Rear Tyres.
(Inner tubes used in
Rear Tyres of
Tractors). (Total
Quantity to be
exported 16,000.00
kgs)
100 kgs
7
ISOBUTYLENE‐ ISOPRENE(BUTYL)RUBBER
(IIR)
42.168
8
ETHYLENE‐ PROPYLENE NON‐CONJUGATED
DIENE RUBBER(EPDM RUBBER)
7.714
9
CARBON BLACK
32.542
17
1.242
19
ZINC OXIDE
2.087
20
STEARIC ACID
0.447
21
MICROCRYSTALLINE PETROLEIIM WAX
0.497
25
0.497
87.194
Export Item
QTY
鉱
Ｎ
。
Description
QTY
17. Inner tubes of
rubber Other : For
Tractors : Other
(Inner tubes used in
other than Rear Tyres
of Tractors). (Total
Quantity to be
exported 6,000.00
kgs)
100 kgs
7
ISOBUTYLENE‐ ISOPRENE(BUTYL)RUBBER(IIIり
42.1
ETHYLENE‐ PROPYLENE NON‐ CONJUGATED
DIENE RUBBER(EPDM RUBBER)
7.707
9
CARBON BLACK
32.513
1.241
19
ZINC OXIDE
2.085
20
STEARIC ACID
0.446
21
0.497
25
0.497
|  | |
87.118
Note:- In Rubber Chemical & Misc. Chemical, the value cap should Ue appticaUte as per Cenera Note
Hand Book of Procedure (Vol.II) for all the export items.
fthe
RA may take consequentlel action as per Policy / procedures.
No.:73/3/87・ALC1/2017
PaサName:GOLDEN ROLLS
PVT LTD
Mcet No/Date:11/87‐
ALC1/2018
19,07.2018
: The Committee observed that firm has not replied to DL issued to them and decided that a final
inder may be issued to the firm by post.
Name:MACRO
ect No/Datc:11/87‐
YMERSP.LTD.
1/2018
19.07.2018
HQ File
:01/87/050/00255/AM18/
A File
Lic,No/Date:3310030393
22.05.2017
Case No。:54/3/87‐ ALC1/2017
:08/24/040/00526′ AM17ノ
1.05.2017
810140400
: Approved
File
File

22
I The Committee considered the case as per agenda and based on technical comments of D/o C&PC
vide OM No.‐ 46011/20/2009‐PC‐II dated 27.12.2013,decided to approve fo‖ owing noHms:¨
EXPORT ITEM
QTY
IMPORTITEM
QTY
Alkyd Resin‐ S‐5035
LV(701/‐ 2%Resin Content)
l kg
1. Distilied Fatty Acid
0.236 kg
2. Phthalic Anhydride
0.266 kg
3. Glycerine
0.103 kg
4. Xylene
0.315 kg
RA may take consequential action as per Pollcy / Procedures.
No.:55/3/87‐ ALC1/2017
PaりName:MACRO
POLYMERS P.LTD.
ヽ4ect No/Date:11/87‐
ALC1/2018
19.07.2018
! The Committee considered the case as per agenda and based on technical comments of D/o C&PC
vide OM No.‐ 46011/20/2009‐PC‐ II dated 27.12.2013,cominittee decided to approve fonOwing norrns:‐
No.:35/3/87‐ ALC1/2017 1PaりName:SHRIRAM SEPL
Mcet No/Date:11/87‐
COMPOSITES PVT LTD
ALC1/2018
19.07.2018
ecision ! Based on technical comments of DIPP fumished vide communication No. 71204/2018-TSW dated
.12.2013, committee decided to approve following norms :-
EXPORT ITEM
QTY
IMPORT
ITEM
QTY
FIBER CLASS REINFORCED
PLASTIC PIPES&FHTINCS
THEREOF
900mm dia(wt.appx.33,54,750
kgs,)
33.54,7501くgs
(46,000Meter)
ISOPHTHALIC
RESIN
3,64,230Kg
GLASS FIBRE
ROVINGS
11,50,200Kg
RA may take consequcntial action es per Policy / Procedures.
P田りName:MACRO
POLYMERS P,LTD.
満」
Udyog Bhawan,New Deihi
Lic.No/Date:0810140422
01.06.2017
EXPORT ITEM
QTY
IⅣIPORT ITEM
QTY
Alkyd Resin‐ S¨5035
LV(70‐「/‐2%Resin Content)
l kg
1. Distilled Fatty Acid
0.236 kg
2. Phthalic Anhydride
0.266 kg
3. Glycerine
0.103 kg
4. Toluene
0.315 kg
RA may take consequential action as per Policy / Procedures.
Lic.No/Date:0410163218
Mcet No/Date:11/87‐
No.:53/3/87‐ ALC1/2017
IStatus:Approved
File
File
92/AM17/

23
1 1Dechion:The commhcc cOnddaed me“ se¨ po電enda md dcdd“ ЮdeFerthecase       l
No′1)ate:11/87‐
1/2018
19072018
HQ File :0 l/87050/002481 AMI 8l
I 
The committee considered lhe requcst of the firm and note that firm wants to with&aw their
Therefore, committee decided to withdraw the case.
No■44/5/87-ALC1/2017
Name:JINDAL POLY
No/Date:11/87‐
LTD
19072018
Filc:01/87/050/00359/AM18/
い
Ｆ
10/AM18/
: The committee considered the request ofthe firm and note that firm wants to withdraw their application.
comminee decided to withdraw the case.
## Case No.:47/3/87‐ ALC1/2017
IP肛りName:JINDAL POLY
FILMS LTD
Lic No′Datc:0510403344
:05/23/040/00137/AM18/
06072017
N●:43/5/87‐ ALC1/2017   1Pars Name:Л NDAL POLY    IMeet No7Date:11/87-
19072018
「
Q ⅢCЮ 187/050/00358AMlν
陽角男:0/Om06/AMIν
: The committee considered the request ofthc lirm and note tha! firm wants to withdraw their application.
committee decided to withdraw the case.
Ｆ
・
Ｆ
ns●No.:51/5/87‐
LC172017
辮
酬NJEC rOP州
脚
r"
Approvcd
3昴掲
50/00366/AM18/
Decision:Based On thc dccision of Meeting No 10 oF Norlns Committee‐ Vlll,which was hcld on
1007.2018,commitee decided to approve fo‖
owing ad‐ hoc noms:‐
EXPORT ITEM
QTY
IMPORTITEM
QTY
VEHiCLE NTERIOR CRAB
HANDLE  FRONT  (Each
weighing 150 grm)
3,60,000 Number
l POLYAMIDE‐ 66
6274 80 Kg
2 POLYAMIDE-66
642 60 Kg
3 POLYPROPLENE
17992.80 Kg
4 DAMPER
3,60,000 Nulnber
5 COLOR CONCENTRATE
378 Kg
EXPORTITEM‐ 2
EXPORT ITEM
QTY
IMPORTITEM
QTY
VEHICLE NTER10R GRAB
HANDLE REAR
(Each wcighing 164 gnn)
420000 Number
I POLYAMIDE‐ 66
6306 300 Kg
2 POLYAMIDE‐ 66
3660 300 Kg
3 POLYAMIDE‐ 66
749 700 Kg
4 POLYPROPLENE
20991 600 Kg
靱
撒
:
udpgBhMn.New Del‖
Ststus:
Wltbdrrwn
Strtus:
Wlthdrrs,n
しic NoノDate10510403859
30082017
Ststus:
lvithdrewtr
Lic No/Date:0510403860
30082017

24
5.DAMPER
420000 Number
6。COLOR CONCENTRATE
441 Kg
RA may take consequential action as per Pollcy / Procedurcs.
No.:62/5r87‐ ALC1/2017
Name:MACRO
YMERS P.LTD.
LC1/2018
19.07.2018
Lic.No/Date:0810141010
2.09.2017
## Case No.:3/9/87‐ ALC1/2017
HQ Fllc:01/87/050/00449/AM18/
Lic.No/Date:0810141065
03.10.2017
lDecision : The Committee considered the case as per agenda and decided to defer the case.
P田りName:MACRO
No/Date:11/87‐
POLYMERS P.LTD。
1/2018
19.07.2018
IRLA File
:08/24/040/00172/AM18/
: The Committee considered the case as per agenda and decided to defer the case.
No.:7/9/87‐ ALC1/2017   1PaッName:MACRO
Mcet No/Date:11/87‐
YMERSP.LTD.
ALC1/2018
19.07.2018
File:01/87/050/00448/AM18/IRLA File
Lic.No/Date:0810141073
Decision : The Committee considered the case as per agenda and decided to defer the case.
No.:16/9/87‐ ALC1/2017
Name:MACRO
Mcet No/Date:11/87‐
ALC1/2018
19.07.2018
YMERSP.LTD.
Fne
LicoNo/Date:0810141287
10.11.2017
:08/24/040/00225/AM18/
I The Committee considered the case as per agenda and decided issue deficiency letter to the authorization
lder for submission of the following information.
a) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported.
b) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each
materials required in the manufacturing process.
) Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
be furnished. If the scrap is being sold, the sale value,/commercial value may be indicated.
Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product.
No.:6/9/87・ALC1/2017
Name: RAPID
No/Date:11/87‐
status:
Deferred
EERINC CO.P.LTD.
1/2018
19.07.2018
File
Lic.No/Date:0510404632
17.11.2017
lDecision : The Committee observed that firm has not replied to DL issued to them and decided that a final
ASHOK C
HQ File:01/87/050/00457/AM18/
:01′87ノ050/00377/AM18/

25
1拝mⅢⅢmayいS暉
"●
9 11111PO■ _              |
No.:28ノ1/87‐ALC1/2018  1PなりName:KAMAKSHIFLEXI IMeetNo/Date:H/87‐
NTS P,LTD
1/2018
19.07.2018
File:01/87/050/00028/AM19/
RLA File
:08/24/040/00071/AM18/
! The committee considered the case as per agenda and decided to defer the case.
No。:29/1/87‐ ALC1/2018
P釘りName:KAMAKSHI
FLEXIPRINTS PRIVATE
Decision 3 The committee considered the case as per agenda and decided to defer the case.
No.:36ノ1/87-ALC1/2018
Party Name: PERFECT BELTS lMeet No/Date:ll/8?-
ALC1/2018
19,07.2018
「Q田∝
m慇7Ю
"Ю∞
%ハmツ騰鵬1ド
4Ю研
Lic.No/Date:3010104226
.02.2018
! The Committee considered the case as per agenda and decided to call for percentage composition of
compound used in manufacture ofexport product.
: Approved
/2018
19.07.2018
File
RLA F‖ e
:04/24/040/00228/AM18/
:01/87/050/00076ノAM19/
Decision : The Committee considered the case as per agenda and decided to approve Adhoc Norms as under:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
TYRE REPAIR PATCH C00KIES : UP
C00KIES, BULLS EYE C00KIES, CX
C00KIES,OTHERS GSM150
24598 Sq.yard
SILICON COATED
KRAFT PAPER
CSM150
25335
Sq.yard
RA may take consequential action as per Policy / Procedures.
No.:1ノH/87‐ALC1/2018
PaりName:KKALPANA
INDUSTRIES INDIA LTD
No/Date:11/87‐
1/2018
19.07.2018
Lic.No/Date:0310819999
:03/94ノ040/00979/AM18/
i Based on the decision of Meeting No. l0/87-ALCll20l7 of Norms Committee-Vlll, which was held on
1.03.2018, committee decided to approve following ad-hoc norms:-
EXPORT ITEM
QTY
IMPORTITEM
QTY
XLPE Compound
500MT
1.LDPE Cranules
495 MT
ASHOK C
Lic.No/Date:0810141720
Mcet No/Date:11/87‐
19.07.2018
File:01/87/050/00029ノAM19/IRLA File
ICasc No.:30/2/87‐ ALC1/2018
PTッName:KWIK PATCH
Lic.No/Date:0410163979
:01/87/050/00203/AM19/
IStatus:Approved

26
2. Di- cumylperoxide (DCP)
4. Octagon Jumbo Sleeves-BOX
930 Boxes on net to
net basis with
accountability
RA may take consequential action as per Policy / Procedures.
No.:2/11/87‐ ALC1/2018
IMeet No/Date:11/87-
Approved
ALC1/2018
19.07.2018
Decision 8 Based on the decislon of Mceting No.2ノ
87‐ALC1/2017 of Nol11lS COmlnittec‐ VⅡI,which was held on
.08.2017, committee decided to approve following ad-hoc nonns:-
EXPORT ITEM
QTY
IDIPORT ITEM
QTY
XLPE Compolnd
contahing mininum 98%
LLDPE
lMT
1.LDPE Granules
0.9994MT
2. Di- cumylperoxide (DCP)
0.0008MT
3.Antioxidant
0.0008MT
4. Octagon Jumbo Sleeves-BOX
I 860 boxes on net to
net basis with
accountability
condition.
RA may take consequential action as per Policy / Procedures.
P田りNalne:DORF KETAL
Mect No/Date:11/87‐
ALC1/2018
19.07.2018
DeFerred
CHEMICALSINDIA PRIVATE
LIMITED
「QⅢ∝
O1/87畑∽∞“ハ
mリ
Lic.No/Date:0310820130
0/01079/AM18/
.03.2018
Decision: The Committee considered the case as per agenda and decided issue deficiency letter to the authorization
holder for submission of the following information.
) lechnical descriptionVspecifications, percentage composition (by weight) of fte products to be exported.
r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each
r) Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use
ry be fumished. If the scrap is being sold, tle sale value/commercial value may be indicited.
r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
f) Complete Chemical Reaction
Party Name: TECHNO
PVT.LTD.,
No/Date:11/87‐
Approved
WAXCHEM
1/2018
19.07.2018
Decision:Based On the exmination of the case of frm by Teclmical Expert(cOnsultant
{DMVI.}) in File No.
118710501000471AM19, the committee decided to approve following ad-hoc nonns:-
ASHOK CFIND輛す
「
ForebnTrade DevebpmentOrT
Qり,鋤ettneraldFor191■
1
MinistrybCOmmerce&:ndリ
Udyog Bhawan,New Delト
P田りNalne:KKALPANA
INDUS■uES INDIA LTD
File
鵬島泥50ρ囲ハMy 
脇
糀0畑021/Amν  l躙
器
∝
“
Ю函
“
♂
## Case No.:3/11/87¨ ALC1/2018
## Case No.:1/2/87‐ALC1/2018
:01/87/050/00047/AM19/
Lic.No/Date:0210208315
:02/24/040/00209/AM18/
104.04。2018

27
EXPORT ITEⅣ【
QTY
I「肛PORT ITEM
QTY
RESORCINOL FORMALDEHYDE RESIN
l Kg
RESORCINOL
0.980 Kg
RA may take conscquential ection as per Policy / Procedurcs.
No.:5′ 11/87‐ALC1/2018
Name:RELIANCE
HQ Fne:01/87/050/00207/AM19/
/2018
Deferred
19.07.2018
File
:0310820267
5/AM18/
.04.2018
Decision: The Committee considered the case as per agenda and decided issue deficiency letter to the authorization
holder for submission of the following information.
) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each siage and each of
,) Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
ry be fumished. If the scrap is being sold, the sale value/commercial value may be indicated.
) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
f) Copy of Guaranteed Norms by Technical Collaborator
Quantity and Notional Value of By-products obtained in manufacturing
No.:8′ 11/87-ALC1/2018
Name:RELIANCE
Mcet No/Date:11/87‐
USTRIES LTD.
1/2018
Deferred
19.07.2018
F‖e:01ノ87/050/00210/AM19ノ
RLA File
:03/95/C140/01038/AM18ノ
ic.No/Date:0310820265
Decision ! The Committee considered the case as per agenda and decided issue deficiency letter to the
authorization holder for submission ofthe following information.
) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages ilaimed at each stge and each of
) Chemical name, Technical specifications of items proposed to be imported.
l) Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
ray be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
Material balance indicating calculative statement ofthe requirement ofeach ofitem for manufacture ofeach of
product
f) Copy of Guaranteed Norms by Technical Coilaborator
No。:9ノ11/87‐ALC1/2018
PaサName:RELIANCE
INDUSTRIES LTD.
cet No/Date:11/87‐
1/2018
19.07.2018
HQ File :01/87/050/002n/AMtgt Inte rite
:03/95/040/01087/AM18/
! The Committee considered the case as per agenda and decided issue deficiency letter to the
ion holder for submission of the following information.
) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each
ASHOK
Foreign Trade Development Otficc;
Diredqale General of Foreign Trade
Ministry of Comrerce & lndustry
Udyog Bhawan, New Delhi
LicoNo/Date:0310820264
04.04.2018

28
the materials required in the manufacturing process.
Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not, Ifnot the technical justification for its non-use
be fumished. If the scrap is being sold, the sale value/commercial value may be indicated.
) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
0 Copy of Guaranteed Norms by Technical Collaborator
No.:10/11/87-ALC1/2018
Name:RELIANCE
Meet No/Date:11/87‐
STRIES LTD。
IALC1/2018
Deferred
19,07.2018
「QⅢずИ御加必mッ
310820354
1121/AM18/
i The Committee considered the case as per agenda and decided issue deficiency letter to the
holder for submission of the following information.
) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of
r) Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
Copy of Guaranteed Norms by Technical Collaborator
A File
10.04.2018
Party Name:BULK LIQUID
Mcet No/Date:11/87‐
SOLUT10NS PVT LTD
ALC1/2018
19.07.2018
No/Date:0710113094
10.04.2018
! The Committee considered the case as per agenda and decided to approve following nonns :-
No。:7ノ11/87‐ALC1/2018
Name:RELIANCE
Mect No/Date:11/87‐
ALC1/2018
19,07.2018
INDUSTRIES LTD.
No.:17/H/87‐
1/2018
Approvcd
DeFerred
Lic.No/Date:0310820475
16.04.2018
Forelgn Trade Deve:opment OFicこ
「
鵠
岬
認
鼎
霧
厨ll腸
0
Udyog Bhawan,New Delhi
EXPORT ITEPl
QTY
IMPORTITEM
QTY
Flexible
Plastic
Tanks
6000 Nos. Containing : Relevant
Liquid Liner Film 183960 Kgs,
Polypropylene Granules 941 I 8
Kgs, UV Stabilizer Masterbatch
1882 Kgs, 3" PP Valve 12000 Nos,
PP Frame/PP Plates 6000 Nos, PP
Clips 24000 Nos, PP Flanges /
Airvent 6000 Nos.
312156
kg
1.RELEVANT LIQUID LINER FILM
193158 kg
2.Polypropylene Granules
101647 kg
3.U.V.Stabilizer Master Batch
1920 kg
4.3"PP Valve
Netto Net
5。PP Frame/PP Plate
Netto Net
6.PP Clips
Netto Net
7.PP Flanges / Airvent
Netto Net
RA may takc consequential ection as per Policy / Procedurcs.
File:01/87/050/00209/AM19/
0/00913ノAM18/
45
17

29
Decision : The Committee considered the case as per agenda and decided issue deficiency letter to the
holder for submission ofthe following information.
Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each o
Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
Copy of Guaranteed Norms by Technical Collaborator
No.:12′ 11/87‐ALC1/2018
Mcet No/Date:11/87‐
IALC1/2018
19,07.2018
File:01/87/050/00214/AM19/
File
,No/Date:03108205:3
:03/95/040/OH69/AM18/
18.04。2018
ion : The Committee considered the case as per agenda and decided issue deficiency letter to the
zation holder for submission of the following information.
) Technical descriptionVspecifications, percentage composition (by weighQ ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of
Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
ry be fumished. If the scrap is being sold, the sale value/commercial value may be indicated.
)Material balance indicating calculat市e statement ofthe requirement ofcach ofitem for manufacture ofeach of
product
0 Copy of Guaranteed Norms by Technical Collaborator
No.:6′ 11/87‐ALC12018
Name:RELIANCE
ES LTD.
1/2018
19,07.2018
「QⅢ錮И加
"畑狙ハ
mツ
Flle
Lic.No/Date:0310820560
/040/00911/AM18/
i The Committee considered the case as per agenda and decided to refer the matter to Technical
Consultant){SK)
Name:RELIANCE
Mcet No/Date:11/87‐
INDUSTRIES LTD.
1/2018
19.07.2018
File:01/87/1350/00216′AM19/
RLA Filc
:03/95/040/00016/AM19/
10820620
2018
Decision 3 The Committee considered the case as per agenda and decided issue deficiency letter to the
authorization holder for submission ofthe following information.
) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported.
麟l
PaりName:RELIANCE
INDUSTRIES LTD.
Case No。:14/H/87‐ ALC1/2018
m呪胃棚嚇冊
1織
d

30
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of
re materials required in the manufacturing process.
r) Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use
be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
Copy of Guaranteed Norms by Technical Collaborator
Name:VRINDAVAN
Mcet No/Date:11/87‐
Approved
ASTIC INDUSTRIES
1/2018
19.07.2018
1器3月50/00217AMlツ
Decision i Based on the decision of Meeting No. l0/87-ALcl/2018 of Norms Committee-VtIt, *f,i.i** t.ta on
10.07.2018, committee decided to approve following ad-hoc norms:-
EXPORT ITEM
QTY
IMPORTITEM
QTY
HDPE GRANULES(REPROCESSED/
RECYCLED)NET CONTENT:1)HDPE
(REGRIND):1,00,000.000 KILOGRAM
100000 kg
HDPE(REGRIND)
101000 Kg
RA may teke consequential ection es per pollcy / procedurcs.
No.:16/11/87‐ALC1/2018
Name:NAVNEET
Meet No/Date:11/87‐
Approved
EDUCAT10N LIMITED
ALC1/2018
19.07.2018
! The Committee considered the case as per agenda and decided to approve following norms :-
ASHOK C
## Case No.:15′ 1lr87‐ALC1/2018
No/Date:0310820617
1/AM19/
14.05.2018
EXPORT ITEM
QTY
IMPORTITEM
QTY
2‐POCKET POLY
PORTFOLIO WITH PRONG
(1,00,00,000 NOS)
6000001くg
1,PRONCSttEYELETS
(20000 Kgs)
30000000 Number
2.RELEVANT POLY
PROPYLENE SHEETS
609000 Kg
RA may take consequentiel action es pcr policy / proccdurcs.
13aseN
囲
.I:i;i;lil
∝
3mm■ALα2018「蹴躙棚
:50/00169/AM19/    1::淵:0/00295/AM
on:Based On the examination of the case of
50/00169/AM19,the Committee decided tO app
1 障r“鵬ア「…Ⅲ
p
Hν  l悧鼎α囲∝″"6「
Arlln by Technical Expert(cOnsultant{DNM.})in l
rove fo1lowing ad‐ hoc norlns:‐
rroved
File No.
EXPORT ITEM
QTY
IMPORTITEM
QTY
POLYAMIDE‐ 140(RESIN
CONTENT 100%)
100000 Kg
DIMER ACID
50592.001くg
DISTILLIED FAttY ACID
18156.00 Kg

take conseouential action as
31
Name:RELIANCE
No/Date:11/87‐
ES LTD.
/2018
19.07.2018
:0310821016
16.05.2018
the case as per agenda and decided to refer the matter to Technical Expert
PaりName:RELIANCE
Mcet No/Date:11/87‐
INDUSTRIES LTD.
ALC1/2018
19.07.2018
! The Committee considered the case as per agenda and decided issue deficiency letter to the
holder for submission ofthe following information.
) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported.
) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of
Chemical name, Technical specifications of items proposed to be imported.
Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use
ry be furnished. If the scrap is being sold, the sale value/commercial value may be indicated.
,) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of
product
Copy of Guaranteed Norms by Technical Collaborator
Mcet No/Date:11/87‐
ALC1/2018
DeFerred
19.07.2018
10821790
i The Committee considered the case as per agenda and decided to refer the matter to Technical Expert
Consultant DNM).
Meeting ended with a vote of thanks to the Chair.
**ホホ*****ホホ
Foreln Trade Deve:opment Ottcc
Dodorale Cenera!ofForetn■adO
Mhも町Of COmmerce&hdusw
Udyog Bhawan,New Delhi
ヽ
No.:13/11/87‐ALC1/2018
File:01/87/050/00215/AM19/
: The Committee considered
## Case No.:11′ 11/87‐ALC1/2018
Lic.No/Date:0310821109
21.05.2018
## Case No.:4ノ11/87-ALC1/2018
P劉りName:ARKEMA
CHEMICALSINDIA PVT.LTD.,
Flle:01/87/050/00206/AM19/