DGFT Committee Minutes

1 MINU‐S OF NORMS COMM11lLE(NC‐ 7)OF PLASTIC&RllBBER PRODUCTS' MEETNG NO.1/AM18 個ELD ON20.07.201つ tJNDER THE CHAMNSHIP OF SHRIS.B.S.REDDY,ADDL DGFT Meeting No。1/87‐ NC‐7/2017 ofNORMS COMDttTTEE cC‐ つdealing with`Chapter 39 and 40 oF ITC(HS)COde'held o■20.07.2017,under the Chainnanship of Shri S.B.S.Reddy,Addl.DGFT, Directorate General of Foreign Trade,Depamlent Of Commerce,Udyog Bhawan,New Delhi‐ 1100H. Foilowing Orlcers attended the Meeting:

1. Shri Nand Lal,Consultant,DIPP
2. Ms Chim sharm■Dy.DGFT
3. Shri Ashok Chander Bhatt,FTDO

2. Folowing are the decisions ofthe Norms Committee aner deliberation and RA concemed sha‖ take consequential action as per Foreign Trade Policy/Procedures: MANUAL CASES

Case No.A‐ 01

MIS H3mlltOn Ho■sewares PvL Ltd. HQF No 01/87/050/00174/AM14ノDES‐VI stam: Reiected NC No.:1/AM18 D3ted:20.0■2017 Adv Lic No and Date 0310737623 datcd 13.062013 RA F.No. 03/94/040/01038/AM13 Requ€st: Decision : Request: Decision : Review of adhoc norms lired in re.rpcct of Advance Authorization No. 0310737623 dated 13.06.2013 The committee considered the case as per agenda and decided to maintain its earlier decision taken in its meeting No.48/AM-t5 held on 25.02.2015 relating to fixation of adhoc norms Amendment in the description of Erport item against Advance Authorization No. 0310806370 dated 18.07.2016 The committee considered the case as per agenda and noted that condition of98% of LLDPE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description of Export item in the Authorisation. 鶴醒聾燻韓豊T ぽ糧鵬郡 誨t鯛酢 『『吊い職 難聾黒諦舗1湘

Case No.A‐02

M/s Khlpalla llldustries (Indi3)Ltd. HQ F.No.01787/50/2941AM17/ DESVII stam: Reiected NC No.:1/AM18 Dated:20.0■2017 Adv Lic No and Date 0310806370 dated 18.07.2016 RA IL No. 03ノ94/040/00163/AM17 撒詰ι惑郡許昴い 1 4/

Cas€ No A-03 Mls Kblpana lndustrles Cndi3)Ltd. HQ F.No 01/87/50/1311rAM17/ DES‐VII Stam: R●ected NC No:1[麒18 D■ted:200■2017 Adv.Lic.No and Date 0310803134 dated餓03.2016 RA R Nα 03/94/040/00168/AM17 Request: Decision Request: Decision Request: Decision A-uendment in the description of Erport item sgriNt Advance Authorizetion No. 03108031E4 dsted 09.03.2016 The committee considered the case as per agenda and noted that condition of 9g% of LLDpE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description ofExport item in the Authorisation. Amendment in the description of Export item rgrinst Advance Authorization No. 0310802E57 drted 25.U2.2016 The committee considered the case as per agenda and noted that condition of 98% of LLDPE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description of Export item in the Authorisation. Amendment in the description of ExPort item 8g8inst Advance Authorintion NQ 0310806367 dated 18.07.2016 The committee considered the case as per agenda and noted tllat condition of 98% of LLDPE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted, Hence committee decided to Reject the request of the applicant for amendment in the description of Export item in the Authorisation. Ⅷ常喋 l群翠:1ぶ計 1 Case No■ 「 04 Mls Kblpana llldustries Cndi3)Ltd. HQ F.No 01/87/50/289/AM17/ DESVII stam: Reiected NC No.:1/AM18 Dated:20.07.2017 Adv.Lic No.and Date l1310802857 dated 25.02.2016 RA】■N● 03/94/040/00168/AM17 C8Se No.A‐05 M/s Kblp●■8 1nd“■ “" ondiBD Ltd. HQ F.No.01787“ Xソ2941/AM17/ DESVⅡ stam: 町eCted NC No.:1/AM18 Dated:200■2017 Adv Lic.No.and Date 0310806667 dated 18.07.2016 RA II No. 03/94/040/00019/AM17 2 'ゝ¬TJゴえδヽ¬くてsHARMA D轟滅潔繭配品憎::

NC No:1/AM18 Dated:200■2017 R No. 03/94/040/0020/AM17 Request: Decision Request: Decision Request: Decision 鍛躙 di冒鷺 .」跡ぽ° n of Exp“ 詭m3ph“ A“3nce Auぬo山■ o■No 壁謬電需∬嶋器噌%轟iぜミ∬T脂淵ittTeぷ器鳳dF訛 description ofExpOrtitem in■℃Autk洒s“on Amendment in the description of Erport item egrinst Advance Authorization No, 03108030E1 dated 04.03.2016 The committee considered the case as per agenda and noted that condition ofgg% ofLLDpE is incorporated to ensure accountability of inpus and committee felt that same cannot be deleted, Hence committee decided to Reject the rcquest of the applicant for amendment in the description ofExport item in the Authorisation. Amendment in the description of Erport item rgsinst Advance Authorization No. 0310E06377 dated 19.07.2016 The commiftee considercd the case as per agenda and noted that condition of 98% of LLDPE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description ofExport item in the Authorisation. Case NQ A‐ 07 Ws Kblpana lndustr腱澪 o,db)Ltd. HQ F.No.01/87/501129/ADI1177 DESVII Status: Rejected NC No.:1/AM18 Dated:20.0■2017 Adv Lic.No.and Date l1310803081 dated 04.C13.2016 RA R Nα 03/94/040/01012/AM17

Case No.A418

Ws Kblp3■●Ind■s血 αndiab L餞 HQF No 01/87/50/295/AM17/ DEttVⅡ stam: Reiected NC No.:1/AM18 Dated:20.0■2017 Adv.Lic.No.and Date l1310806377d3ted 19.07.201` RAR N(■ 03/94/040/00169/AM17 ^

10806371 dated 18.07.2016 RN(■ 03/94/040/00170/AM17 Request: Decision Request: Decision Request: Decision Ainendment in the description of Erport item agrinst Advrnce Authorizetion No 0310Effi371 dated 1&07.2016 The committee considered the case as per agenda and noted that condition ofgE% of LLDpE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description ofExport item in the Authorisation. Amendment in the description of Erport item agai*t Advance Authorization No, 0310E06595 dated 26,07.2016 The committee considered the case as per agenda and noted that condition of 9g% of LLDpE is incorporated to ensure accountability of inpus and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in lhe description of Export item in tle Authorisation, Amendment in the description of Erport item against Advance Authorization No, 0310806595 dated 26.07,2016 The committee considered the case as per agenda and noted that condition of 98% of LLDpE is incorporated to ensure accountability of inputs and committee felt that same cannot be deleted. Hence committee decided to Reject the request of the applicant for amendment in the description of Export item in the Auhorisation, 動基婆轟緩静糧 。曲t酬濡喩躍 de ,飛恣黒脇 」器 1

Case No.A‐ 10

M/s ■0●lpan3 1tldustries andinp Ltd. HQ F.No.01/87/50/301/AM17/ DESVII stam: R●ected NC No:1/AM18 Dnted:2■0■2017 Adv.Lic.No.and Date 0310806595 dated 26.07.2016 RA R Nα 03/94/040/00270/AM17

Case No.A‐ 11

M/s ■3●lpan3 1nduStries σndi3)La■ HQ F.No.01/87/511/3112/AM17/ DES‐VII stam: Reiected NC No:1/AM18 Dated:20.は2017 Adv.Lic No.and Date l1310806596 dated 2607.2016 RA ll No. 03/94/040/00287/AM17 4

5 ONLINE CASES No.:1ん2/87‐ALC172014 Name:N「ERNAT10NAL No/Date:1/87‐ ORS LIMITED File:01/87/050/00277/AM15/ :. 10790 Sq Meter No.:27/42/87‐ ALC1/2014 Name:INTERNAT10NAL File:01/87/050/00368/AM15/ File:03/94/040/00558/AM15/ 18092014 1/2017 .2017 :Based on the technical comments ofDIPP mmished宙de Letr No 7/26/2017・TSWaヒ萌sed),h COmmittee following adhoc norlns: lxport ltem No.1:PVC SOlid Woven Fire Resistant Antis“ 饉c Conveyor Beldng Type‐ 3500 Net tOtal weight Of belt l.791 kg/Sq.MtD No/Date:1/87‐ 7 2017 ‐Lic No/Date:0310787375 Fnament Yam(1011tl Denieう 2115 kysq M“たr of Exportltem N●2:‐ PVC Solid WOven Fire Rosistant Antstatic Conveyor Beiung Type‐ 601Xl oet total weight ofbe■15 781 kg./Sq Mt) Qumity■9760 Sq Mcter Item:‐ S,No IMPORTITEM QTY 4. Polyester Fnament Yarn(1000 Denlerb 4 640 kg/Sq MT Ofexpo“ product 5. PVC Resin 3.303 kg/Sq. MT ofexDort Droduct 6. PVC Phosphate Plamcizer 2.557kノSq M 「ofex●● “ product RA mry trkc comcquentill actioD rs per Policy / Procodures. : Based On the technical comments OfDIPP fhnished vide― rNo.7/26/2017‐ TSW,the Conlmitec follo■ing adhoc nOnlls: Item■PVC Solid Woven Fire Resistant A面血dc Conveyor Beling Type‐ 8000 oettOta:weight ofbelt 16 907 mtDr 10109 Sq, Meter 4.7 kg/Sq. metcr in export Produot

● ４ PVC Resin 3.659 kg/Sq. met€r ofexport product 3. Nylon Yam Type_8000 Wldth(1372 119 Roll Lng山800 FT 0.830 kg/Sq.meter ofexport product 4 PVC Plasticizer Phosphate 2.861 KG/Sq. Metq ofexport product Fastcner with pins Netto Net take cons€quentiol ection rs pcr / Pmccdurcs. F高 繭 繭 耐 1躙 鵠 器 ‰ ,囲 ッ 憫7日 ドⅢ∝ 0/87/050/00m/AMl″ |じ鵬∽∝Иttw 階漑甘 ・∞ 6%9「~ 騰 器LLM品 ぶ鷲撃 l∞mm、J ttP飾 轟 “ 宙 “ L●●erヽ 脚 例 7■SL EXPORT ITEM QTY IMPORT■1ルM QTY Polyethylene Glycol 100 NI「 Ethylene O対de 88190 MT RA m.y trke coBequcntiel ection er pcr Pollcy / Proccdurcs. No.:35/18/87‐ ALC1/2015 Name:StlMLON No/Date:1/87‐ LIMllLD, 1/2017 2017 File:01ノ87/050/00205/AM16/ File:52/24/040/00006/AM16/ :The Commitee considered the case in the meeting and taking cue lЮ m S10N H134 and H‐ 208 decided to the following adhoc norms. RA mey talrc consequcndal rction as per Policy / Prrccdurrc. sq qgrFeYro (fat-{r qrqr<) leputy Director General cf Foreign TEde frr qrcrc qerFrivrrerq Direclorate General of Fo.eign Trade ga'rq rq=- r€ Fld-rroorr udyog Bhawan, New Delhl-l loo11 in difFerellt ^ 6 3 lce

RLA Fi!e:03/94/040/00324/AM16/ )n: The Committer considered the case as pct agcnda for submission ofthe following information. ) Technioal descriptionyspecifications, perccntage oomposition (by weight) ofth€ products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stagc and each of the No.:22/20/87‐ ALC1/2015 Name:KRISHNA No/Date■/87‐ PVr LTD 1/2017 2017 File:01/87/050/00266/AM16/ Lic No/Date,0310797923 04082015 required in the manufactuing process. Chemical name, Technical specifications of items proposed to be importcd. Whether the scrap generatcd in the process is being reused or not Ifnot the t€chnical justification for its non-use may fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. )Mateial balance indicating calcul轟ve statement Ofthe requlrement oFeach Ofitem fOr manu徹 仙にOfeach oFexport Specift the name ofexport polyol instead ofgrade-l No.:4/1/87‐ALC1/2017 Name:TECHN0 No/Date■/87‐ Approved AXCHEM PVT LTD 7 階Π L劇お 7"υO∞“ /AMW 10206204 127/AM16/ ■02015 : Teking calculation from [D92 committee decided to fix the following adhoc norms:- No.:14/1/87‐ALC1/2016 Name:INTERNATIONAL No/Date■/87‐ LIMITED 1/2017 2017 File:01/87/050/00368/AM16/ Fne:03/94/040/00623/AM16/ File 2017 16112015 10800252 udy翻凛乱鷹ば濾鏑ヽ、 1 action es :Based on the technical comments ofDIPP ttished vide Letter No 7/26/2017‐ TSW(Re宙sed),the Item■PVC SOlid Woven Fire Resistant Antistatc Conveyor Belting Typc‐ 3500 cNettotal weight ofbelt 13 789 mtp mry trkc coNcqucntirl action rs por Pollcy / Prccedurcc. PolyeЫけFilament Yam(1000 7 Ststus: Deferred

No.:3/1787¨AL(C1/2017 Name:KALPENA L【haTED, No/Date:1/87‐ /2017 .07.2017 階∬器 C口∞∝ "7 : The Committee considered the case in the meeting and decided to app.ove ttre adhoc norms as follows': No.:3/3787‐ALC12016 Name:POLYCAB WIRES lLTD. ALC1/2017 .2017 File:01/87/050/00056/AM17/ RLA File:03/95/040/00612/AM16/ LicoNo/Date:0310802043 .01。2016 The Committee observed that party has not replied to DL issued. A reminder to party may be sent by Post. Mcet No/Date:1/87‐ ALC1/2017 20.07.2017 M,* ':ran srql r c Frfrna s HAR MA -G qeri++rr6 (tu+el qrqrq) lepui Di;edor Geneil cf Foreign Trade atql qrqrs q-6[Rcrrdq olrLi:tiiite General of Foreign Trade ,ffi""xsaJf ,ffi,-i,|l,o,o#,,' Polyethylene Compound (Semi Finished) containing tZS Ur on lOpB ana tX Mt.ofCalciun Carbonate P釘りName:SDDⅢ DECOR LicoNo/Date:0810137827 03.05.2016 :Based on the SION H‐ 68 and technica:comments of DIPP l"Hshed宙 de Letter No.7/274/2016・TSW,the Item Description Double Side Decorative Laminates with Barrier Paper size 2800 x 1300 mm Thickness (3.6a Sq. Mt. per sheet) 2.0 mm -5770 number (21002.800 Sq. Mt) 2.3 mm-1200 number (7874.000 Sq. Mt) 2.5 mm- 700 number (3567.200 Sq. Mt) 4.5 mm-1300 number (840.000 Sq. Mt.) l Sq.Mtr x 10.00 ■1ln thickness of 14.5 kg 1/‐ 2.5% 8 Status: Deferred

l. The above norms are based onl0.00mm thickness with average weight of 14.5 kg+/-2.5%o and are applicable on 2 mm to 4.5 mm thickness. 2. In case of variation in thickness/weigh! the quantity of item of import viz. Phenol, Methanol and Kraft paper to be allowed may be arrived atby adopting the following formula: A x B/C where A= euantity allowed for 10.d0 mm thickness of weight. 14.5 +l-2.5o/o, B= The thickness or weight/Sq. Meter of decorative laminates proposed to be exporte{ c= Either the Standard thickness of 10.00 mm or the standard weight of 14.5 kg/sq. Meter of 10,00 mm thickness. 3, The quantity of other items viz. Base Paper, Barrier paper, Tissue paper, Melamine and BoPP film will remain unchanged irrespective ofthickness and weight of decorative laminate to be exported. 4. Import of Base Paper will be restricted ta l8o/o of FoB value of export, for the of below 2.5 mm thickness. 0.214 kg or applied quantity whichever is 0.172 kg or applied quantity whichever is less 0.01 kg ofappli6d quantity whichever is icss No.:51/8/87‐ ALC1/2016 Name:SDDⅢ DECOR 。LD. ド QHLЮИ ttЮm“/AM17 11/AM16/ 8 BaSed on S10N H‐ 68 and the technical comnents of DIPP fttnished vide Let"r No.7/274/2016‐ TSW, epproved following adhoc norms: Item Description Double Side Decorative Laminates with Banier Paper size 2800 x 1300 mm Thickness (3.6a Sq. Mt. per sheet) 1.3 mm-3640 number 1.8 mm-7500 number 2.0 mm -2520 number 2.4mm-1200 number 2.6 mm- 700 number 3.0 mm-4200 number 4.0 mm-1300 number l Sq.Mtr x 10.00 mnl thickness of 14.5 kg十/‐ 2.5% 9。15 kg or applied quantity whicheveris less 0.214崚or applied quantity whichever is less 0.172 kg or applied qmtity wHcheveris less lMeet No/Date:l/87- IALC1/2017 120.07.2017 ,No/Date:0810137875 105.2016 )eputy Director General cf Foreign Trade Rvr qrqn rerBiqnaq Dlrectorate General of Forelgn Trade selrq "r+.r, q€ Ri-d-rroorr Udyog Bhawin, New Delhi-11oo11 9

10 I . The above norms are based on I 0.OOmm lhickness with average weight of I 4.5 kg +l-2.5o/o nd are Lpplicable on 2 mm to 4.5 mm thiclqress. 2, ln case ofvariation in thicknesVweight, the quantity ofitem ofimport viz. Phenol, Methanol and Kraft paper to b6 allowed may be arrived aiby adopting the following formula: A x B/C where A= euantity allowed for t0.d0 mm thickness ofweight. 14.5 +l-2.5o/o, B= Tlrc thickness or weighUsq. Meter of decorative laminates proposed to be export€d, C= Either thtstandard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq. Meter of 10.00 mn thickness. 3. The qusntity ofother items viz. Base paper, Barrier paper, Tissue paper, Melamine and BOPP film will remain unchanged inespective ofthici<ness and weight ofdecorative laminate to be cxported. 4. Import ofBase Paper will be resficted to lE% ofFOB value ofexport, for the ofbelow 2 5 nlm thickness 12 No.:3179/87‐ ALC1/2016 Name:MOTHERSON StJMI LIMITED Fll●:01/87/050/00206/AM17/ 1 File:05/24/040/00154/AM17/ No.:54/3/87‐ ALC1/2016 Name:SHORE AUTO EXPORTS PV「LTD )●:The Commitee decided tO call■om the Applicantthe UOM OfExpo“ Item in Kg.and contents Oflmport “Standard Malaysia Rubber CV60" No/Date:1/87‐ 17 2017 Approved Lic No/Date:3110066280 :01/87/050/00166/AM17/ :31/83/040/00021/AM17/ : Based on the techical∞alments Of DIPP l■■ished vide Leter No 7/316/2016‐ TSW,the Conlmittee fOnOwing adhOc nOrtrls: Notc: l. Thc rbovc norms erG for l(X)96 Silicon Rubbcr Hot r not cont lnlng ![y Yrrn/fibric. RA msy tske con3€oucntirl rction rs 前 SHARMA ・ 離 f→Ψ酬 満3羅[翼 『etts島驚¨ Meet No/Date:1/87‐ ALC1/2017 20072017 Status: DeFerred Lic No/Date:0510398992 05072016

lPartyName: SML FILMS ILn,IITED h Co― itt cOnsmered the case and taking c“ hm SIONs 1134田dH‐208,the Co画雌ed∝ided approve ad¨hoc norm as appued for by the authoHsation holder in their Advanced Authc前 atton. RA may teke consequential action as per policy /procedures No/Date:1′87‐ 1/2017 。2017 :01ノ87ノ050/00593/AM17/ ! The Committee considered the case in the meeting and decided to approve the adhoc nonns as follows: RLA File :34/24/040/00130/AM17/ Lic.No/Date:3410042458 19.08.2016

Case No.:57′14/87‐ ALC1/2016

lMeet No/Dat€: I /87-

Case No.:60/1/87‐ALC12017

P錮りName:GLOBAL MEDICINES LTD, Xanthan Gum (200Mesh) Net cont€nt per I !fr@ take uentiel ection rs per Policy / Prcccdures. Pa"y ITRADEL ド ロ 4/87‐ALα加 “ [鰍 岬 W¬ 翻 軍 71柵 d 鵬跳"ρ ∞"/AM17 1粉 刷:∽∞%/AM17 1淵TЮ 2∽ “ 飢デ | 1馘e監』 ]:‖‖蠍器 I:零:「ガ the Casc in the mecting and taking cue■ om SION H‐ 396 and H568 decided to item: S.No. EXPORT「EM Ｑ Ｔ Ｙ ｍ Phenol Forrnaldchyde Resin Powder 120.000 Import ltem: S.No IRIPORT■■LM 艦 | 1 Phenol 72.000 1 RA may teke consequentiel action as per Policv / Procedures. 諭J麺蛯ξ ttMA gq q5xftSryq (f+$rt rqFn-q) feputy Diredor Generil cf Foreign T16de fu1 qrqrq rerfuecrrgq Directorate Generat of Foreign Trade sdrq +r+-r, ?r€ ftffi-11sot Udyog Bhawan, New Delhi-11OO11

Name:MACRO POLYMERS 1/2017 File:01/87/050/00374/AM17ノ RLA File:08/24/040/00209/AM17/ 12 ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for uastages claimed at each stage and each of the No.:41ノ14/87‐ ALC1/2016 No/Date:0810138574 1.08.2016 : The committee considered the case as per agenda ana aeciaea to cail@ ee also decided that applicantmay be asked for submission ofthe following information. maGrials required in the manufacturing process. ) chemical name, Technical specifications of items proposed to be imported. t) Whether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use may B fumished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export P雷りName:MACRO POLYMERS Mect No/Date:1/87‐ P.LD。 ALC1/2017 l2o.o7.2ot7 File:01/87/050/00373/AM17/ File:08/24/040/00208/AM17/ :0810138629 : The Committee considered the case as per agenda and decided to call for following information norn the ) Technical descriptions/specifications, p€roentage composition (by weight) ofthe products to bc exported. ) Detailed manufacturing proc€sll along with technical justification for mstages claimed at each stage and each of the required in the manufacturing prooess. ) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative statcment of the requirement of each of ircm for manufacture of each of export Ca"No.:37′13/87‐ ALC1/2016 HQ File :01/87/050/00312/AM17/ P錮りName:RELIANCE INDUS¶MESLD。 No/Date:1/87‐ /2017 12017 Lic.No/Date:0310808132 106/AM17/ ¶ 轟 ′tテイ千B^SHARYA 乳難鰍“ ミ屹 黙鳳 」器 1

Case No.:40/14/87¨ALC1/2016

Decision : The Committee considered the case and decided to spprovG on repeet basis (Adhoc Norms) based on the ision of the NC Meeting No. l3lAMlT held on 28.12.2016 and recommended as under: Styrene Butadおne Rubb釘(Gradα 1783) 17 Status: Deferred 181 動 ¨

13 mey ttkc conscquentiel action es per policy pnocedures. …… 剛61辮 i No/Date:1/87‐ 1/2017 12017 SoN EXPORT rEM QTY陶 SoN IMPORT rHEM oTY(9 1 Rubber Gaskets, Seals for plate Heai Exchanger made ofNBR and EpDM 1,95,771 1 Rubber Compound Shec“ノStrips inade ofNitrile /NBR C‐ 210/C¨260/C‐277/ EPDM E146/E242ノlE260/E271/E105 3,00,000 mey take congequentiel action as pcr policy procedures. No.:9/1/87‐ALC12017 Name: COVESTRO ( INDIA) h{eetNolOat :f lgZ- ATE LTMTTED lt*cttzon .07.2017 ド Ⅲ∝mお知mん∞09/AMW FAⅢ ∝ "/蜘 伽 ∽68/AM17m酔 3 The Committee considered the case as per agenda and decided to call for following information fiom the ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with technicallustification for-wastages claimed at each stage and each of the required in the manufacturing process. chemical name, Technical specifications of items proposed to be imported. Whetherthe scrap generat€d in the proc€ss is being reused or not. Iinot the technical justification for its non-use may bg lmished. Ifthe scrap is being sold, the sale value/iommercial value may be indicated. e) Material balance indicating calculative statement ofthe requirement of each of item for manufacture ofeach ofexport Meet No/Date:1/87¨ ALC1/2017 120.07.2017 ドΠ :lザT01ΨΨlν ttAT憫″ 4Ю“Ю∽ 69/AM17 The Commitee considered the case as per agenda and decided to call for following information from the ) Technical descriptionVspecifications, percentage composition (by weight) of tlre products to be exported. ) Detailed manufacturing process along with technical justification for wastages ilaimed at each Jtage and each of ials required in the manufacturing process. T●I qB

Case No.310/1/87‐ALC12017

Lic.No/Date:0310809932 19。12.2016

14 ) Chemical name, Technical specificatio^ of it"., :lH:1"jjYX?.t::::t1:'"* r.1":::: ,: _b:,,p reused or.not rinot the technicat justincation ror its non-use may -ttith:9. Ifthe scrap is being sold,the sale value/iommercial value -"v U" indicated. Y,*" balance indicating calculative statement oftle requirement ofeich of item for manufacture of each of export No.:37/1/87‐ALC1/2017 No/Date:1/87‐ /2017 。2017 : The Committee considered the case "" p"i 'e also decided that applicantnay be asked for submission ofthe following information. ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with rc-hnical justincation for-wastages claimed at each stage and each of the naterials required in the manufacturing process. ) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not Iinot the technical justification for its non-use may ftrnlsng{. If the scrap is being sold, the sale value/iommercial value may be indicated. Material balance indicating calculative stat€ment ofthe requirement of each of item for manufacture of each of export No.312/1/87‐ALC12017 Name:GOLDEN CASHEW No/Date:1/87‐ PRIVATE LIMITED, 1/2017 12017 I firm : The Committee considered the case as per agenda and desided to call for the following information from the ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with teihnicallustification for-wastages claimed at each stage and each of the lVhetherthe scrap generated in the process is being reused or not. Iinot the technicaljustification for its non-use may itmished. Ifthe scrap is being sold, the sale value/iommercial value may be indicated. )Material balance indicating calculat市 e statement ofthe requirement ofeach ofitem for manufacture ofeach ofexport Name:KRISHNA PVT.LTD。 1/2017 。2017 : The Committee considercd the case as per agenda and decided to ) Technical descriptionVspecifications, perc€ntage composition @y weight) of the products to be exported. ) Detailed manufacturing process along with technical justificetion for-wastages ilaimed at each stage and each of -=,=*BKH,,^ sq rcrft'tYro (friq qrqrt) Deputy Diredor General cf Foreign Trade ft&vr aryrcrrq qaTHarcaq Direc{orate Gen€ral of Forelgn Trade gslq raFT, =rS E:ecfr-rroorr Udyog Bhawan, New Delhl-11OO1'1 Party Name:MACRO POLYIVIERS File:03/94/040/00831/AM17/

Case No.:15/1/87‐ALCl′2017

HQ File :01 187 1050/0001 siAMl 8/ File:03/94/040/00894/AM17/ .01.2017

15 }盤慇糧蹴富蹴澪厘蕊::II踏思驚津鷺 l器孵 1,“ .納:“……… :or nO●Ifnot the"chnicaljustincation fOr tt nOn‐ use may 唸範mished ifthn Or,an:。ヽ.:“ ″.^1月 ,I.^1^^=、^′_____ , , _ ‐
‐ ~~~~~~~~― ―― ^‐ ‐ ・―‐… ・‐ ― ゛“・―・J口‐●=``■●■u11■v==b l10=1‐ usc ma 飾 shed.Ifthe scrap is being sOld,the sale value/cOnlmercial value may be indicated Mateial balance indicatlng calculatlve statement ofthe requLment Ofeach ofitem fOr manuFame ofeach Ofexpo■ 3dllct No.:lUIE7-ALC!/20r7 lfartyName,e>OetrOeO ‐IPOLYMER SYSTEMS PVr LTD ΠたЮ1/87/050/00011/AM18/ IRLARL Ю3,4Ю40んo481/AM17 : The COmnutte cOnsidered the case as per agend3 and decided tO call fOr the fol10wing infonnation,。 m the )Detaild manufa―g「。 rssJΨ ‖山 "Chお J justinttonぉr wastages ddmed m e¨ h stage and each Ofぬe ●●1●●●●:■ ■__、.:“ ^月:●L^_^__` erials required in the manufacturing process. 9emical name, Technical specifications ofit€ms proposed io be imported. whetherthe-scrap generated in the process is being reused or not. Iinot the tcchnical justification for its non-use may .!.i..h:9. Ifthe scrap is being sold, the sale value/iommercial value may be indicsted. ) Matcrial balance indicating calculative statement ofthe req"it"rn"ii-oiIa"r, oritem for manufactue ofeach ofexport PrOduttOn and∞nsmp10n data ofthe expOn item duly∞●ied by the J血sdictiOnJ CustOm authOity No.:49ノ1/87‐ALC1/2017 Name:MAYUR STRAPS No/Datel1/87‐ PACKACNG rNDUSTRIES 1/2017 2017 File :24/24/040/00025′ しヽヽ417/ 1601.2017 10042127 =,M,-^**^ sq rarfricr€ (fr+{ r,{rcr{) Deputy Director Genefal of Foreion Trade fiqr rr.nqy qE|TRyrr{q Directorats General ot Foreign T.ad€ sq.rq "-{r, <$ ffi-rroorr lldyog Bhawan, New Oelhl-r1OO11 : The Committee considered the case in the meeting and decided tO approve the adhoc nonlls as fO‖ Ows: Pmccdures,

16 No.:23/1/87‐ALC1/2017 P田りName:KHANNA YRIBoLD., No/Date:1/87・ DecMon 3 h Comttttec cOnsidered ule case as per agenda and d∝ ided tO call fOr the fO110wing infomation ttDm the ■7- )TeChnical descripttons/speciications,percentage compOsi●on(by Weighth Ofthe pЮducts to be expOrted. )Detailed manufacming pЮ cess a10ng with technicaljusuncation for wastages claimed at each stage and cach of n●|●■.1..・^.,1▲ “ `“ ●L^^▲ ^4!___ naterials required in the manufacturing p.ocess. ) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the pЮcess is being reШ ed or nOt.rnotthetechnicaljustincationfOritsnon‐ use may l田mished.Ifthe scrap is being s01d,the sale value/conlmercial valuc may be indicated. )Manial balance indicating calculative statement ofthe requirement Ofeach Ofitem for manufame ofeach Ofexpo“ :ぃЯll“ Description nomenclature of import item. Pttw Name:EXPANDED No/Date:1/87‐ POLYMER SYSTEMS PVT. LTD l/^rCtnon .07.2017 rⅢ eЮ ν87ん50ん0014/AMlν 「 障 AⅢ∝ “ ″約4∽ “ 52/AM″ 陪∬3孵 醐 Ю田 “ % :h ConlmittDe considered the case as per agenda and d∝ided to call for the f01lowmg infOmation■Om th」 ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with teihnicallustification for-wastages claimed at each stage and each of the ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export Production and consumption data of the export item duly certified by the Jurisdictional Custom authority. No.:13/1/87‐ ALC12017 P田りName:EXPANDED Mcet No/Date:1/87‐ YMER SYSTEMS PVT.LTD 1/2017 Deferrod 12017 Decision : The Committee considered the case "r p"i firm ]/he1!er-th9 scrap generated in the process is being reused or not. Iinot the technical justification for its non-use may -q-itht9. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ) lectmic{ descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with technicdlustification for wastages claimed at each stage and each of the naterials required in the manufacturing process. ) chemical name, Technical specifications of items proposed to be imported. Whether the scraP generat€d in the process is being reused or not. Iinot the technical justification for its non-use may furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. .07.2017 File:06/24/040/00035/AM17/ 17.01.2017

Case No.:14/1/87‐ALC12017

30 ITⅢ ∝∝/87/05∽剛3/AMW ILA血 :"/94/04∽ “ 40/AM17/ LicoNo/Date:0310810722 24.01.2017

17 Material balance indicating calculativ PЮductiOn anl cOnSumpaOn data ofthe expo“ 絶 "dulyccli■ ,0地γ_山e JurisdictiOnal CustOm authOHty. 1熙 ΠL Юν8知 "ЮO"5/AMW :f 棚鵬出席罵辮r黒畷じ認満盤出 `鮒 雰柵猾 | decisl( mder: No/Date:1/87‐ 1/2017 12017 No/Date:1/87‐ 1/2017 ,07.2017 階 Ⅲ∝m/87/05∽∞侶/AMW卜 AⅢ∝彫 約 “ Юm88/AM″ 1囲辮・・ ∞ “ %4 : The Committee considered the case as per agenda and deciaea to ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with technical justification for-wastages itaimed at each stage and each of the ials required in the manufacturing process. Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use may ftmished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. )MateHal bdan∝indicating calculative statement ofthe requirement ofeach Ofitem for manufacme ofeach Ofexpon Pa●Name:QREX FLEX PRIVATE LnttΠ ED LicoNo/Date:5210042156 EXPORTITEM Q町 IMPORTITEM QTY PVC LAMINAT□D FLEX l kg 1.100%POLYES‐ R WARP KNIttED FABRICS (RELEVANT GSM USED IN THE EXPORT PRODUCD 0.1525 kg 2.PVC RESIN 0.33915 kg 3.TATINM DIOXIDEci02) 0.0168 kg 4。CALCIIM CARBONA電 deleted 5.D卜OCrYLrttHttLA‐ cЮD 0.0966 kg 6.OPHCALBRIGШ R deleted 7.EPOXIDIZED SOYBEAN OL deleted 8.BARIUM CADMItM STABLIZER deleted RA mey taIG consequentiel ection es per policy / pmcedurcs. No.:35/1/87‐ALCl′2017

P田りName:PEERLESS CASHEW I 18 No.:31′1/87‐ ALCl′2017 No/Date:1/87‐ /2017 .07.2017 Fne:01/87/050/00031/AM18/ RLA File:33/24/040/00010/AM17/ Lic.No/Date:3310030368 .02.2017 Decision : The Committee considered tt " ""r" ". ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the No.:38/1/87¨ALC1/2017 Name:NAVRATAN IMectNo/Date:1/87‐ 腐 CIIEMICALS LLP ALC1/2017 120.07.2017 10139670 .02.2017 : The Committee considered the case as per agenda and decided to call for the following information from the ) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be expor0ed. ) Detailed manufacturing proce$ along with technical justification for wastages claimed at each stage and each of Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generat€d in the process is being reused or not. If not the technical justification for its non-use may fumished. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requirement of each of ircm for manufacture of each of export frk^ gq q6ryftftvro (l+|av qrvrtl Deputy Direcior General of Foreign Trade ftiqr qrqrq qErR{rraq Directorate General of Foreign Trade selrrr rrqq, <$ Eid-rroorr Udyog Bhawan, New Delhi-11OO11 T剛い動腑| 1紺 ″ 町 TTttfT"TmTW PA]眈“わ 4Ю4∽"64/AMWI出辮“Ю制 0"21 Decision:¶はe Committee cOnsidered me case and decided to approve on repeat basis(Adhoc Norms)based on the decision ofthe NC Mceting No.13/15 held on 25.06。 2014 and reconlmended as under: S.N EXPORT「EM QTY S.N INIPORT rEM OTY 1 Bntyl Acrylate & Methyl & Methyl Methacrylate Monomer Copolymer Emulsion Having Solids 5Gr/-2% lKg 1 Butyd Acwlate 0。21451K禽 2 Methyl Methacrylate 0.2680 Kg may take consequentiel action as per Policy Procedures. File:01/87/050/00038/AM18/ File:03/24/040/00411/AM17/ Sample PIECE of export item. Whether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use trrnistg{. Ifthe scrap is being sold, the sale value/iommercial value may be indicated. Material balance indicating calculative statement ofthe requirement ofeach Ofitem for rnanufacte Ofeach Ofexport

Party Name: NAVRATAI.I 19 Meet No/Date:1/87‐ /2017 12017 : The Committee "oid"t )TeChnical descHptiOns/speciflcatiOns,percentage compOsidon(by Weight1 0fthe pЮ ducts to be expOrted. )Detailed manufaming prO∝ss JOnL with"chnicaljusdicttion fOr wastages cldmed“ each stte and cach Of ■●|●J●1●r__..:,▲■:"`■バ_^..r“_1 Whether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use may -!dth:9. If the scrap is being sold, the sale value/iommercial value may be indicated. ials required in the manufacturing process. Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export Sample Piece of export item. No.:25/1/87‐ ALCl′2017 P田りName:MIDAS TREADS No/Date:1/87‐ (INDIAp PRIVATE LIMrrED 1/2017 07.2017 1鴫 ΠL Юν8η50Ю0025/AMW Decision : The committee considered the case ". p"r "gda -dffid firm Technical descriptionVspecifications, percentage composition @y weight) of the products to be exported. Detailed manufacturing process along with technicallustificatjon forlvastages claimed at each stage and each of the ilerials required in the manufacturing process. Whether the scrap generated in the process is being reused or not. Iinot the technical justification for its non-use may -!-ith:9.Ifthe scrap is being sold, the sale value/iommercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export Mcet No/Date:1/87‐ ALC1/2017 : The Committee considered the case as per agenda and decided to; ) lectnicat descriptiondspecifications, perc€ntage composition (by weight) ofthe products to be exportcd. ) Detailed manufacturing prooess along with technical justification foiwasages ilaimed at eaph siage and each of ials required in the manufacturing process. r) chemical name, Technical specifications of items proposed to be imported. l) Whether the scrap generated in the process is being reused or not. Iinot the rcchnical justification for its non-use may gftrnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of ircm for manufacture of each of export UOM of export item in kg Chemical name of import item at S.No 2 File:10/24/040/00100/AM17/ :1010059710 Ptt Name:VEE KAY VIKRAM No.:39/1/87‐ALCl′2017 CHEMICALS LLP 37 1織 d the No.:36/1/87‐ALCl′2017

RGCLAMATIONS PW.LTD; 20 No.:50/1/87¨ ALC1/2017 No/Date:1/87‐ 1/2017 .2017 File:01/87l050/00050/AMl8/ - ffi : The Committee id. No.:19′1/87¨ ALCl′2017 File :05 D4l04OtOO5? 4/ AMfl El 13.02.2017 sion: The Committee considered the case r. p", "g has not been declared. No/Date:1/87‐ ALC1/2017 7.2017 13.02.2017 sion: The Commiuee considered the case ar per "gends has not been declared. No.:41/1/87‐ALC12017 Name:PoLYLINK Meet No/Date:1/87‐ POLYMERS(rNDrA)LTMTTED l/.tcttzon may teke consequentiel action es por policy procedurcs. *fr{P,^^ sq qerRvr+'(ftq"T qrEllq) )eputy Director General of For€ign Trad6 ft*qr aryrqrq q€TR{rrcrq Oireclorate General of Foreign Trade sdrq rrqq, =r€ frrctft-rroorr -rdyog Bhawan, New Delhl-11OO1'l Status: Approved File:01/87/050/00019/AM13/

Case No.:20/1/87‐ALC12017

Party Name: SPERRY PLAST HQ File :0 I I 87 l0 50 / 000201 ANII S I F ile :05 t24/ 040i00575/AM I Zl lUcNoiOarcos r 040 I 605 r i The Committee considered the cese and decided to rpprove on rcpeet besis (Adhoc Norms) bascd on the of the NC Meeting No. TlAJolls held on 13.05.2014 and rccommended as under: XLPE Compound

21 No.:34/1/87‐ALCl′2017 Name:DASHMESH Mcet No/Date:1/87‐ rNDUsrRrEs pw.LTD. lt*ct tzott 120.07.2017 File:01/87/050/00034/AM13/ Rile :52/241040/00078/AMl Zt @ 16.02.2017 : The Committee considered the case rs No.:26/1/87oALCl′ 2017 ion: The Commifiee considered the case ". with calculation. No/Date:1/87‐ ALC1/2017 20.07.2017 HQ ΠL Юν87/050/00027/AMlJ lRLARL:10/24/040/Om 15/AM17匡icN(ゎaほ101o059"8 .02.2017 rn: The Committee considered the case as per agenda. and import item. Deferred : The Committee considered the case as per ag"nda Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing proc€ss along with technical justification for-lvastages ilaimed at each Jtage and each of the required in the manufactuing process. r) chemical name, Technical specifications of items proposed to be imported. D !/hetner the scrap generated in the process is being reused or not. Iinot the technicaljustification for its non-use may ,:-!-ltt"g. Ifthe scrap is being sold,the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export UOM should bein Kg GSM ofexportitem and importitem No。l and 3 No/Date:1/87‐ ALC1/2017 .07.2017 HQF‖e Юν87/050/00029/AM18ノ :IRLAFib 26/24/040/00022/AM17/LicNttDa"2610012788 Decision:TheCommitteeconsideredthecaseaspcragenda.co..ittee in brand name and norms cannot be fixed. .- A SHARMA irq qrirB+rrn (R-*cr qrqr<) "puty Direcior General of Foreign Trade ft-|qr ?qrqrq qErffinraq Directorale General of Foreign Trade eie}rr rrffi, q$ ffi-rroorr Jdyog Bhawan, New Delhl-11OO11 PRIVATE IALC1/2017

Case No.:27/1/87‐ALC12017

IHOMEPRODUCTS PRTVATE lCase No.:52l1187 -AJ-C.InOfi Case No。829/1/87‐ALC12017 P田りName:SNF[INDIAI PVT. Fllo:01/87/050/00026/AM18/ Nalne:KARTH Name:SMIcoATED PVToLTD. F ile :03/95 1040/00903/AM I Zl llic.NofOarcOt t 08 I I 339

22 No.:21′1/87‐ALCl′2017 P釘りName:MARUrITECHNO RUBBER PVToLTD. No/Date:1/87‐ /2017 12017 File:01/87/050/00021/AM18/ The Cottte cOnsidered the case as per agenda and decided tO referthe mteertO DIPP。 No.:6/1/87‐ALC1/2017 File :01/82l050/00006/AMl 8/,lw-n rfiM E 10207424 1.03.2017 : The Committee considered the casc rs p"r ag"nda ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with rcchnicallustification for-wastages claimed at each stage and each of ials required in the manufacturing process. !vhe1!er the scrap generated in the process is being reused or not. Ii not the technical justification for its non-use may lmished' Ifthe scrap is being sold, the sate value/iommercial value may be indicated. )Mauttal balance indicating calculative statement ofthe requirement ofeach ofitem for manufacture ofeach Ofexpo■ f) Specified import item whether it should be TIDPE or LLDpE or LDpE. ITC(HS) code of import item is wrongly given. Hence correct code should be given No.:17/1/87・ALC1/2017 File:01/87/050/00017/AM18/ 11RLAFile:03/95/040/05930/AM17/ILicoNo/Date:03108H4息 4 1.03.2017 The Committee considered the case as per agenda and decided to refer the mat6r to DIPP. PなりName:SHRIRAM AXIALL No/Date:1/87‐ PRIVATE LIMHED /2017 20.07.2017 HQ File :011871050/00028lLNrl8l ,lRtl fite :tztzqtuotooouttvtnt lii"r.roio"trf glooaSsz+ lcision: The Commiuee considered the case as per agenda. Committee decided to reject the case as ttre e*port ircm is brand name and adhoc norms cannot be fixed. File :05/241040/00595/AMl Zl lUc.NolOateOS r O 4}nq) PaりName:MULTIBASE INDIA

Case No.:23/1/87‐ALCl′2017

P田サName:PODDAR MERCANTLE PVT.LTD, Mcet No/Date:1/87‐ 肛C1/2017 20.07.2017 |‰ 501 Meet No/Date:1/87¨ ALC1/2017 20.07.2017 Status: Deferred

P田サName:MACRO POLYMERS 23 No.:40/1/87‐ALC12017 )cision: The Committee considered the case ", p", per appendix 4E. No/Date:1/87‐ ALC1/2017 。2017 File :08/24/040/00459/AMl 7/ llic.NolDatco8l 0 t3gEzo .03.2017 rn : The Committee considered the case as per "gena as per appendix 4E. No.:44/1/87‐ALC12017 P田りName:MACRO POLYMERS rn:TheCommitteeconsideredthecaseasperagendaanddecidedto""t@ as per appendix 4E. No。847′1/87‐ALC12017 Name:MACRO POLYMERS No/Date:1/87Ⅲ 1/2017 .07.2017 5「 ::L:ザ 7Ю"T“7Ш ttAⅢ∝∝ 24Ю4∽“ 82/AM″ ‐ 10139819 rn:TheCommiteeconsideredthecaseasperagendaanddecidedto""@ as per appendix -4E. 0w- fur qrrf rcHtrRA sHARMA sq qtrrffiqrtr' (fr+{r qrqn) leputy Director General of Foreign Trade ftvr arrqrq qarfurrsq Directorate General of Foreign Trad€ ss[-q qqq, q$ ffi-rroorr .jdyog Bhawan, New Delhi-11OO11

Case No.:43/1/87‐ALC1/2017

Party Name: MACRO POLYMERS 「 ¨ 1・ m洲・1剛鶴T躙・ 1器跳"岬 ∞御w膨 雅∽ "49/AM″ ped.。n:Taking cuc hm SION H‐ 292 conllnittee dedded" 1麟ルド臨 Approved 欄辮側∽ 074441 flx the fo‖ owing adhoc non■:‐ S.N。 EXPORTITEM QTY(Kg) S.N. IMPORTITEM QTY“ 1 Modifled PhenoHc Resin 50,000 Para Tertiary Butyl Phenol 11,500 2 I rarUaenyae 5,750 BA mey takc consequentiel ection as per Policy Procedures. ,n File :0 li87l05 0t00044t AMtSt : IRLA Fite :OgDqtoaotow|u ril/lt7

Case No.:32/1/87‐ALCl′2017

P田りName:SHAKUN ALC1/2017 24 lVhether the scrap generated in the process is being reused or not. Iinot the technicaljustification for its non-use may Amished. Ifthe scrap is being sold, the sale value/commercial value may be indicarcd. 1「 Ⅲ∝∝んmmЮ ∞ "畑 w「 AⅢ∝34/24/04∽ "69/AM″ 1悧辮 解Ю “ 鵬 HQ File:01/87/050/00032/AM18/ RLA File:34/24/040/00346/AM17/ Lic.No/Date:3410042984 .03.2017 ! The Commiuee considered the case as per agenda and decided to call for the following information from the Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with technical justification for-wastages claimed at each stage and each of ials required in the manufacturing prooess. 3 The Committee considered the casc as per agenda and decided to call for the following information from thc Technical descriptions/specifi cations, composition (by weight) ofthe products to be )MateHJ bdance indicating cdculative statement Ofthe requirement ofeach ofitem for manufacttt ofeach ofexpo“ No/Date:1/87‐ /2017 ,07.2017 :cision: The Committee considered the case as per agenda and decided to call for exact name of fatty nciA ana aetails per appendix -4E. No.:45/1/87‐ ALC1/2017 Mcet No/Date:1ノ87‐ ALC1/2017 .07.2017 10139863 10.03.2017 : The Committee considered the case as pcr agenda and decided to oall for exact name of Fatty Acid and details per appendix 4E. No/Date:1/87¨ 1/2017 .2017 The Commitrce considered the case as per agenda and decided to call for exact name of Faty Acid and details per appendix -4E. No.:33/1787‐ ALC1/2017 Name:SIIAKllN Meet No/Date:1/87‐ YMERS LIMITED, ALC1/2017 .2017 χ i「峰こぎ J`:菖LA sq qcrFrirro (fA*<r qyErnl )eputy Direcior General cf Foreign Trade ft|sr qrqrs qanR{rffi{r Directorate General of Foreign Trade gslq qqn, q$ R=d-rroorr Udyog Bhawan, New Delhi-11OO11

Case No.:42ノ1/87‐ALC1/2017

P田りName:MACRO POLYMERS File:01/87/050/00045/AM18/ File:03/24/040/00462/AM17/

Case No.:46/1/87¨ALC1/2017

P田りName:MACRO POLYMERS ７ 　 　 　 　 　 　 　 　 　 　 一 ― ― ― ― ― ― ― ― ― ｌ ｋ Ｆ Ｉ Ｉ Ｉ Ｉ Ｉ Ｉ Ｉ Ｉ Ｉ Ｉ 1鵬 d 58 Stetus: Deferred 旺Q File:01/87/050/00042/AM18/ RLA File:08/24/040/00442/AM17/ LicoNo/Date:0810139864 10.03.2017 60 Stetus: Deferred HQ Ⅲ ず ν87/OmЮOo46/AMW ttARLЮ ν24/04∽04“/AM17 Lic.No/Date:0810139865 10.03.2017 Status: Deferred

25 Detailed manufacturing process along with t"" rterials required in the manufacturing prooess. Whether the scrap generated in the process is being riuscd or not. Iinot the technical justification for its non-use may -!-irlr:{. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ド Ⅲ∝∝潟7ん "Ю 00“/AMW ILAHLЮ 犯約4∽0万3/AM17 1悧 辮 Ю劉0207% ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be export€d. ) Detailed manufacturing process along with technicallustification for-wastages claimed at each stage and each of the )"Y,::n'balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export No.:58/1/87‐ALC12017 Name:NAV AUⅢCHEM No/Date:1/87‐ tLTD, 1/2017 .2017 ! The Committee considered the case as per agenda and decided to call for the following information from the ials required in the manufacturing process. No.:3/1/87‐ALC1/2017 P田けName:WACKER Meet No/Date:1/87‐ CHEMICALS PVT 1/2017 LTD lzo.ot.zOtt The Conlmittee considered the case as per agenda.Conlmittee decided tO nect he casc as the sp∝ inc import has not been given. Deferred ! The Committee considered the case as per agenda and decided to call for the following information from the a) Technical desoriptionVspecifications, percentage composition (by weight) ofthe products to be exported. b) Detaild manufacturing prooess along with technical jwtification for wastages itaimed at each sage and each of the required in the manufactuing process. ) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use may furnished. If the scrap is being sold, the sale value/commercial value may be indicated. )Matenal balance indicating calculative statement ofthe requirement ofeach ofitem for manufacme Ofeach ofexpor (k#w Tar YrdftTcHlTRA SHARMA sq qeritcro (fr+fl qrqr{) eputy Oiredor General cf Foreign Trade frtsr ?rTrqrq qelrR{rrtrq Directorate General of Foreign Trade ts€lrq .r{<, q$ frd-rroorl Jdyog Bhawan, New D€lhL11OO11 HQ File:01/87/050/00591/AM17/ File:30/24/040/00040/AM17/

Case No.:13/1/87‐ALC12017

1/2017 lvheJler the scrap generated in the process is being riused or not. Ii not the technical justification for its non-use r_lmished. Ifthe scrap is being sold, the sale value/iommercial value may be indicated. Material balance indicating calculative statement of the requirement of each of item for manufacture of each of export 63 Itetus: Rejected P雷りName:BLS POLYMERS I し 1『I). | HQ File:01/87/050/00018/AM18/ 巴AⅢ∝“ 23ん“Ю“"/AM17 1悧辮Ю"面 1995 /1

) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing proc€ss along with teihnicdlustincation for-wastages claimed at each stage and each of the 26 No.:59/1/87‐ALC1/2017 Name:VIsEN INDUSTRIES No/Date:1/87‐ /2017 12017 File:01/87/050/00592/AM17/ File:03/95/040/00968/AM17/ Lic,No/Date:03108H936 .03.2017 I The Committee considered the case as per agenda and decided to call for the following info.r"ti- rfo. tr," required in the manufactrning proc€ss. No.:5/1/87‐ALC12017 PaサName:WACKER No/Date:1/87‐ CHEMICALS PVT /2017 Deferred .07.2017 10207478 ,2017 , ~ : : The Conlmittee considered the case as per agenda and decided tO caH fOr the following information l}om required in the manufacturing proc€ss. Whether the scrap generat€d in the process is being reused or not. If not the technical justification for its non-use may fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative stat€ment ofthe requirement of each of item for manufacture of each of export No.:61′1/87‐ALCl′2017 P田 "Name:VISEN INDUS■ uES No/Date:1/87‐ 1/2017 Deferred 12017 ) chemical name, Technical specifications of items proposed to be imported. L) Whether the scrap generat€d in the process is being riused or not. Ii not the technical justification for its non-use may ftrnisttg!. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of export ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. r) Detailed manufacturing process along with technical justification for-wastages claimed at each sLge and each of the F‖e:01/87/050/00594/AM17/ ! The Committee considered the case as per agenda and decided to call for the following information from the lechnical descriptionJspecifications, perc€ntage composition @y weight) ofthe products to be exportcd. hailed rynuflcturing proc€ss along with technical justification for wastages claimed at each jtage and each of Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requirement ofeach of ircm for manufacture of each of export ド AⅢ∝“″ 5Ю“ん“ 59/AM17 )eputy Dire“ r ceneral of Fore19o Tede W崎驚留署献 1 晰 蒻 167 しic.No/Date:0310812089 25.03.2017 /

lCese No.:22lltE7 -ALCtnOfi 27 lMeetNo/Date:l/87- ALCU2}r? Approved 120.07.2017 File 10402079 1/87/050/00022/AM18/ AMIT/ No.:53r1/87‐ALC1/2017 Name:SMICOA‐ D No/Date:1/87‐ PVT. LTD. 1/2017 Deferred 12017 10812200 : The commifipe considered the case as per agenda and decided to ca@* fr". ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the ;) Chemical name, Technical specifications of items proposed to be imported. lVhetherthe scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-use may fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Mattal balance indicating calculative statement ofthe requlrement ofeach ofitem for nlanum Ofeach ofexport UOM should be in Kg GSM of export item and import item No. I and 3 No.:57/1/87‐ ALC1/2017 Nalne:SHⅣA LTD I File:34/24/040/00328/AM17/ 10043084 30.03.2017 : The Committee considered the case as per agenda and decided to call for the following information from firm: Technical descriptionVspecifications, perc€ntage composition (by weight) ofthe products to be exported. Detailed manufacturing proccss along with technical justification for wastages claimed at each stage and each of thel .r=,$fu***^ sq qarB-t{rs' (fr*cr qprygl Deputy Diredor General of Foreign Tracle fti:qr qrtrg TETRq;1Hr{ Directorate General of Forelgn Trade seilrr ?re-{, q{ ffi-rroorr Udyog Bhawan, New Delhi-11OO11 3 The Committee considered the case in the meeting and decided to approve the adhoc nonns as follorvs: RA /2017 69 | FIQ File :0r 187 1050100053/AMl 8/ 巴A File:03/95/040/00981/AM17/ 70

28 ) Chemical name, Techni""l rp""ifi"u llH:11ff3":"1::1: rj"1T::-':.0.",.pri"a o'.nor iinoitrre tecrrnical justification ror its non-use may -ryry..h:+ If the scrap is being sold, the sale value[ommerciat vatue , ol il;ffi]'rvrv, rvr rF ,u,'ui's rlrq Y::" balance indicating calculative statement ofthe requirerint oi"""t of ircm for manufacture ofeach ofexport No.324/1/87‐ALC12017 Name:BIILK LIQUD No/Date:1/87‐ PVT LTD /2017 12017 F‖e:01/87/050/00024/AM18/ RLA File:07/24/040/00408/AM17/ Liclヾ0月Da":0710111357 1.03.2017 No.:30/1/87‐ ALC1/2017 lMeet No/Date:l/87- At-c,tnln 20.07.2017 The Commitrce considered the case in tt "rrr."ting for by the a,thorisation holder in their Advanced A'ttrori-zation. RA may takc consequentiel ection es per policy / procedures. Approved 鵬,w"9響lγ l影昴 :γ9∞鯰/AMW I .No/Date:3210078159 .2017 : The Commitee considered the case in the.eetin No.:1ノ1/87‐ALC1/2017 P田りName:J K IIYRE& INDUSTRIES LD. Mcet No/Date:1/87‐ ALC1/2017 .07.2017 The Committee considered the case as per agenda and decided to refer the matter to DIpp. PaサName:V.K.A. EXPORTITEM QTY IMPORT「EM QTY HDPE Net Impregnated with Alphacypermethrin 0.55% 33,70,000 Kg 1.COLOURING MASTERBATCH 35,232.9 Kg 2.LLDPE 1,56,306.O Kg 3.ALPHACYPERMETHRIN‐CH 97% 18,535 Kg 4.HDPE CRANULES 33,27,499.1 Kg RA may take consequentiel sction es pcr Policy / Procedures. File:01/87/050/00001/AM18/ Fne:05/23/040/00560/AM17/

29 No.:2/1/87‐ALC12017 HQ File:01/87/050/00002/AM18/ Name:GARWARE No/Date:1/87‐ YESTER LTD. /2017 12017 Name:KOHIN00R INDIA Meet No/Date:1/87‐ :The ConmttDe considered the case as per agenda and d∝ided to call for the f0110宙ng infOmation hm the ) lechnical descriptionvspecifications, percentag€ composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for-wastages claimed at each stage and each of the rterials required in the manufacturing process. lvhether the scrap generated in the process is being riused or not. Ii not the technical justification for its non-use may _!i.-h:9' Ifthe scrap is being sold, the sale value/commercial value may be indicated. )"Y::n, balance indicating calculative stat€ment ofthe requirement of each of item for manufacture of each of export ALC1/2017 20.07.2017 The committee considered the case as per agenda ano aecia"ffi No.:55/1/87‐ ALCl′2017 No/Date:1/87‐ 1/2017 12017 IHQΠ L Ю1/87/050/00055/AM18/ RLA File:03/95/040/01015/AM17/ Lic.No/Date:0310813631 29.05。2017 The Co_ittee considered the case as per agenda and decided to call for the f01lo宙ng info―tiOn tom the .LTD Declsion: firm ) Technical descriptiondspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacnring process along with technical jtstification foiwastages itaimca at each stage and each of the ials required in the manufacturing proc€ss. r) Chemical name, Technical specifications of items proposed to be imported. lVhether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-use may fumished. If the scrap is being sold, the sale value/commercial value may be indicated. )Material balance indicating calculative statement ofthe requirement Ofeach ofitem for manufacme Ofeach ofexpore -,frfuRMA sq qerB+sm' (F{A"r qqry) puty Direcior General of Foreign Trad€ Rr zqrqrr qErft111-6q irectorate General of Foreign Trade r$yq z1qn, q$ ffi-rroorr Jyog Bhawan, New Dethi-11OO11 File:03/94/040/00106/AM18/ No/Date:0310813151 F‖e:30/24/040/00002/AM18/ .No/Date:3010104035 12.05。2017 P釘けName:RELIANCE INDUSTRIES LTD.

30 No.:54/1787‐ ALC1/2017 No/Date:1/87‐ 1/2017 12017 脇:揚m囲“ r: The Committee considered tlr..r"" of the NC Meeting No. 20/8?-ALCln0l5 held on 2O.0t.itil6 and recommended as under: EXPORTI口EM QTY IMPORT「EM QTY PVC Flex l kg l. PVC Resin (Suspension Grade) 0.4583 kg 2.Plasticizer oOP/DOA/DINP) 0。18335 kg 3.Ti如」uln Dio対dc 0.0550 kg 4.Stab‖ izer 0.0458 kg 5.Lubricant 0.00458 kg 6. Opticd Brightening Agent 0.001 kg 7. Polyester Yam 0。178 kg RA may teke consequentiel ection rr per policy / prucedurcs. No.:56/1/87‐ALC1/2017 P田りName:AAKASH Mcet No/Date:1/87‐ YFILMS LIMI‐ D ALC1/2017 12017 No/Date:5210042304 17 : The Commifiee considered the case as per agenda and decided to call for the following informatior fi.om thc ) Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. ) Detailed manufrcturing proceslr along with technical justification for wastages claimed at each stage and each of the ials required in the manufacturing prooess. ) Chemical name, Technical specifications of items proposed to be imported. lVhether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-use may fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ) Material balanc.e indicating calculative statement ofthe requirement of each of item for manufacture each ofexport Meeting ended with a vote ofthanks to the Chair. ´ Name:PloNEER 電 ヨ青午′9嘔 sHARMA 黒,翌墜爾●コ '罫耶