DGFT Committee Minutes

co、n肛1lLE(NC‐7)OF PLASTIC&RtlBBER PRODUCTS' 剛ETNG N0 1SrAM17 oELD ON21&26.04.201つ UNDER T硼E CHAIRMANSHIP OF SHRIS.RS.REDDY,ADDL.DGFT Meeting No.15/87‐ NC‐7/2016ofNORMS COMM■■■LE(NC‐ つdealing withChapter 39 8nd 441 orITc(Htt COde' held on 21&2■04.2017,under■e Chamanship of sm s.B.S.Reddy,Addl DGFT,Dhctorate Ceneml of Foreip Tnde,Deparment ofConlmerce,Udyog Bhawtt New Delhi‐ 11001l Followhg o価ce"attended the Meeung l) Shn Nand Lal,Consultant DIPP 2 Follou″ ng are the decisiong oFthe Norllls Commi“短e al掟r delibcration and RA concemed shalltake consequendal actlon as Pcr Foreu Trade Policy/Procedures MANUAL CASES Request:F破ntion ofadhoc norllls in respect oFAdvance Authorindon No.0310810425 dated 10.01.2017. Decision: As perthe wrltten conlments i"mished by thc DIPP宙de thelrlcter No 7/189/2017‐ TSW dated 20 04 2017,the Conunittce,pproved following ad‐ hoc nolllls: EXPORT ITEM QTY IMPORTITEM QTY required ror expo“ Ofl kg of∝port product Rubber compound sheet (consisting of Acrylic Polymer) l kg l Acrylic Polymers h pnlnay FoロゴAcrylic Resh 095 kg 2. Di Ortho Toly guanidiene 0 0476 kg RA mry take consequentirl ictiotr .! pcr Pollcy / Pmcldur€s. 窃 / SS S REDDY AddiloR3つ “ 01=:こlnera of Ftrが,111 ヽ ) Directcio19 Ct、leral●:Foreil i l i■0● MttS&:[漱 熙 Tふ肝:uま り Udyo9 8hawan,Ne、v Delhi‐110011

Case No.A‐100

M/s Devashlsh Polymers A^.Ltd, HQF No 01/87/162/164/AM17′ DES‐V‖ Status: Approvcd NC No.:15/AM17 Dt:21&26.い_2017 Adv Lic No 0310810425 dated 10 01.2017 RAF No 03/94/040/00848/AM17

Case No.A‐101

Devashlsh Polym.rs Pvt.Ltd. dated 12.012017 Rcqu€st: tr'iration of adhoc norms ln rBpect of Advance Authorlzstlon No. O3lO8f0$5 datGd l2.Ol,ZOU. Decision: As per the written comments fumished by the DIPP vide their letter No. 7/l89D0l Z-TSW dated 20.04.2017, the Committee spproved following ad-hoc norms: EXPORT ITEM QTY IMPORT ITEM QTY rcqulrcd for mrnufrcturt of 1.0 kg of cxport product Rubbcr compound sheet consisthg of EPDM & Carbon Black l kg 1.Synthetic Rubber cPDMp 0 28459 kg 2 Zhc oxide 0 014 kg 3 Carbon Black 0 3417 kg 4.Peptizer 0 020 kg 5. Rubber Processing Oil 0 327 kg 6. Process Aid (O) 0.014 kg 7. hocess Aid (400) 0.014 kg 8 Steaほc Acid 0 003 kg RA mry trkc consequcntlal rction es pcr Pollcy / procrdurcr. Request: Fi=ntioll oF adhoc llorms in r"pect ofAdvallce Authotttion No.0310810427 dated lo,ol.2017. Decヽlo●: As perthe輔●cn comments mished by the DIPP宙de tti letcr No 7/189/2017‐ TSW dated 20 04 2017,the Conlmittcc approved following ad‐ hoc nonns:

Case No.A‐ 102

MノS Devashish Poヽ「ne"PVt.Ltd. HQF No 01/87/162/166/AM17/DESW‖ Stattls: Approved NC No.:151AM17 Dt:21&26.04.2017 Adv Lic No 0310810427 dated 10 o1 2017 RAF No 03/94/040/01013/AM15 EXPORT ITEM QTY IMPORT ITEM QTY rcqulrtd for m.nufrcture of 1.0 kg of crport product Fluorclelastomer Compoulld sheet α ulCanlzedソUllvulCanttd ●ontahhg 81%+/‐ 1% Fluoroelastomer content l kg l. Fluoroelastomer Rubber 0 830 kg 2.Carbon Black 0120聴 3, Magnesium Oxide 0.025 kg 4. Calcium Hydroxide 0 041 kg RA may teke conscqucntlal actlon es pcr Poticy / Procedurcs. Z€az-s4, S.B.S,REODYF Addition:l Dkcctor G -.neral oi Fcrcioi) ll .1 'l:ii:i:r""f t",'fli"::ii:l,lr,= Uii,-r . I -

C“e No.A‐103 MノS Garg:Huttens― A:bertus R費.Ltd. HQF No 01/87/050/00214/AM16/DESW‖ Status: Rcj€cted NC N●.:15/AM17 Dt:21&2■o4.2017 Adv.Lic No 0310796541 dt.10.06。2015 RAF No. 03ノ94/040/00080/AM16 Request: Ratmcatlon of lnput output Norms .t lnst Adylnt. AuthorLauon No. 031079Gs41 dt. 10.05.2015 D€cision: The Committee considered the request of suthoris.tion holder for enhancement in the quantity of import item and it was decided to tum down the request of authorisation holder maintaining the decision taken by NC it its earlier Meeting No. 3/AMl7 held on 03.06.2016. Request Amendment ln the descrlptlon of lmport lt m o.4 {.ln3t Advance Authorh.tlon lto.321qt7z33 dated 02.11.2015 Decision: The Committee considered the casc and decided to approve the amendment as requested by the firm to read the Description of Import ltem No.4 as "I{DPE Gr.nuler/powder' lnste.d of 3HDPE Granules". RA mry trkc consequential sction rs per Policy / Procedurca. Request: Amcndment ln the descrlptlon of Erport Product rgrlut Advrnce Aut[orlz.tlon No. 0510395437 dt. 26.0E.2015. Decision: The Committee considered the case and decided to rpprove the amendment as request€d by the firm to read the Description ofExport product as "PVC Compoutrd (Ertrusion Grsde)' iDsterd of 6pVC Compound'. RA mry take conscquentirl action as per Policy / Proccdures. Requ6t: Amcndment in thc dBcrlption of Erport Prcduct agrlntt Adysncc Authorizttion No. 0510397287 dr. 13.01.2016. Decision: The Committee considered ttre case and decided to epprove the amendment as requested by the fimr to read the Description ofExpon product as "PVC Compound (Transparent Grsdc)' lnstead of gPYC Compound'. It was observed that Import ltem No. 3 - Crbium Carbonrte (earlier approved by NC) was not applied by the firm. Hence, the ComDlttee d€cided to delete this ltem &om the norms. Since, the applicant had not applied for this item and the licence was also not issued for this item. The quantity of lmport ltems maintaininS its earlier decision taken in Norms Committee Meeting No. 1VAM17 held on 28.10.2016. s B S REDDY AddI Onal DヤecO「Cenelal o子 DireCtttte Ccneral oi Fore19n i、年p・卜′^^‐ ‐ ― ・ Cnse No.A‐104 M/3 V,X.A. Polyme6 t\,t, ttd, HQ F.No 01/87/50/00303ノAM16/DESV‖ Staars: Approved NC No.:15/AM17 Dt:21L鴻_04.2017 Adv Lic No. 3210077733 dated o2.112015 RAF No 32/24/040/00028′ AM16

Case No.A‐105

M/sKL工Polymers&Chemicals Ltd., HQF No.01/87/50/179/AM16/DES‐ VII Status: Approved NC No.:lSrAM17 Dt:21`L涎_04.2017 Adv Lic.No and Date D510395437 dt.26.08.2015 RAF No 05/23ノ040/00217/AM16 C"●No.A‐107 M/sKLJ.Polyllle"&Chemicals Ltd., HQ F No 01ノ87/50/385/AM16/DES‐ VⅡ Status: Approved NC No.:15/AM17 Dt:21&26.工.2017 Adv.Lic No and Date 0510397287 dt。■3.01.2016 RAF No 05/23/040/00408/AM16 RA mry tskG consoquonthl rction ar per Pollcy / Procedurer.

Case No.A‐ 108

M71K皿 Polyme"&Chemi“L Ltd., HQF No 01/87/50/386/AM16/DES‐ VⅡ Stsirs: Appmvcd NC No.:lS/AM17 Dt:21L2604.2017 Adv Lic No.and Datc 05■0397288 dt.13●1.2016 RAF No 05/23/040/00408/AM16 Request: AmendmeDt ln thc dcacrlptlon of Eryort Product rgrlnrt Advrncc Aut[orlz.tlon No. 0510t9r288 dt.13.01.2016. Docilion: The Committee considered the case and decided to epprovc the amendment as requestcd by the firm to read the Description ofExport product as (PVC Compound (franrprrcDt Grrdc)' lnrtead of 6PVC Compound,. It was observed that Import It€m No. 3 - Celciun C.rbomlc (earlier approved by NC) was not spplied by the fim. Hence, the Committee decided to delete this item from the norms. Since, the applicant had not applied for this item and the licence was also not issued for this item. The quantity of lmport ltems maintaininS its earlier decislon taken in Norms committee Meeting No. 1l/AM17 held on 28.10.2016. RA may take consequential actlou as pcr Policy / Procedures. Request: Amendmentillthe description ofEEpoH Product●80i■9t Adv8nce AuthorL"tlo口No.0510397289 dt.13.01.2016. Dection:lh Conlmtte considered tte case and dccidcd to approve the amendment as rcquested by the flm to read the DescHption of Export product as “PVC Compound o■rllgion Cndo" in“ ead of “PVC Compound". RA may"ke congequential●ction as per PolicyノProcedur". Requ$t: Amendment in the d$crlptlon of Erport Product .B.lnrt Advrnce Authorlz.tlon No. 0510397290 dt. 13.01.2015. Decillon: The Committee considered the case and decided to appnove the amendment alr requested by the firm m read the Description of Export product as gPVC Compound (ErtrNion Grrde)' instcad of "PVC Compound'. RA mry trke coNequenthl oction 03 per Policy / Pmcedures. Rcqucats Flntlon of rdhoc normr h rerpoct of Advucr Authorhrtioa No. 03lffilylf! dr.trd 25.o2,20ly'. Dcclslon : Thc Committcc consid€red the casc and decided to r€fcr to DIPP, S3S REDDY A101lona Direcloi Cenelal oi「 creign ll■ | Dlectcrate Ccnerr‐ l o ForoiglT「od M雨S&:[m品 iW∴‖:udリ udyog Bhawan,Ne″ pFi卜L44●^´

Case No.A‐ ll19

M/sKL.J.Po:ymers&Chemicall Ltd., HQ F.No.01/87/50/387/AM16/DES‐ VI Status: Approved NC N●.:15/AM17 Dt:21`LK_04.2017 Adv Lic No.and Date 0510397289 dt.13.01.2016 RAF No D5/23/040/00410/AM16

Case No.A.110

M/sKLJ.Polymerg&chemicab Ltd., HQF No 01ノ87/50/388/AM16/DES‐ VI Status: Approved NC No.:15/AM17 Dt:21`L2604.2017 Adv Lic No and Date 0510397290 dt.13.01.2016 RAF No 05/23/040/00411/AM16

Case No.A‐ 111

M/3 BaY.r Materlal Scbnce h^. ttd. HQF No O1/87/50/218/AM16/DESW‖ Status: Dcferrcd NC No.:15/AM17 Dt:21&鴻.04.2017 Adv.LIc.No. 0310771923 dated 25.02.2014 RA F.No. 03/94/m/00294/AM16

Case No.A‐112

M/s Prlme Protr$slon &port & S.rvlce! Pvt. ttd. HQ F No O1/87/171/00191/AM17/DESW‖ Status: Dererred NC No.:15rAM17 Dt:21&鴻_04.2017 Adv Lic No SE2 F.No. 1/24/2010:PER:EOu:KR:CSEZ Sublect: Flntlon of Stand.rd lnput.Output ofmr for th. .Ipo,t product. Decision : The Committee considered the case as per agenda and decided issue deficiency lettcr to the authorisation holder for submission ofthe following information. a) Technical descriptionvspecifications, percentage composition @y weight) ofthe products to b€ exported. b) Detailed m.nufachring process along with t€chnical justification for wastages claimed at each stage and each of the mat€rials required in the manufacturing process. c) Chemical name, Technical specifications of it€ms proposed to be imported. d) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may be fumished. Ifthe scrap is being sold the sale value/commercial value may be indicated. e) Material balance indicating calculative statement of th€ r€quirement of each of itcm for manufacture of each of export product. SubJecl: Flxatlon of Standard lnputOutput l{ormj for thc aryort product. Decision : The Committee considoed the case as per agenda and decided issue deficiency letter to the authorisation holder a) Technical descriptionVspecifications, percentage composition Oy weight) ofth€ products to be exported. b) Detailed murufacturing process along with technical justification for wastages claimed at each stage and each of the malerials required in the manufacturing process. c) Chemical name, Technical specifications of items proposed to b€ imported. d) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-r$e may be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicated. e) Material balance indicating calculative statement ofthe r€quirement ofcach ofitem for monufacture ofeach ofexpon product. e) Production and consumption data duly certified by the centsal excise authorities for one year SubieCt:Fi=ation of adboc norms in口 "pect or Adv● 口ce Authoriatio口No.0310745244 dt.13.03.2013 Declsloll:B●sed on the tech●Ical commen●orDIPP rurlltthed vlde Letter No.7ノ414r201●TSW d■ted 27.01.2017, the Committec●onsidered the cose and approved the●dhoc llorms as fo1lows: sii.iriDl)Y /#4 Acjdiuonal oircstcrGgneral oiFcreigil Ii'r,tl Directoiate G6neral o: Foreign Trade Ministrv of Commerce & ln(justry Gbvernment of lndia Udyog Bhawan, Nev/ Delhi-11cai1 Cnse No.A‐113 M/SMにrO:nks Ltd. HQF No O1/87/171/00261/AM17/DES‐ V‖ Status: Deferred NC No.:15/AM17 Dt:21&26.04.2017 Adv Lic No SEZ F.No. KASEZ/1∞%EOU´ /O1/2014‐ 15

Case No.A‐114

M/s lntrrnatlon.l ConvayoB Ltd. HQ F No 01/87/171/227ノAM177DE3Ⅶ Status: Approvcd NC N●:15/AM17 Dt:21&26.い_2017 Adv Lic No and Datc 0310745144 dt.13.08.2013 RA F.No. 03794/040756/AM13

PVC Solld Woven Fie Resistant Antistatic Convcyor Belhg Typc‐ 350 cNet total wdght ofbe■lo o89 kg/ sq ml) 2230 Sq Meter l Polyester Filament Yam(1000/1500 Denic→For Typc‐ 350 l.Ut kgAS content cont lncd h erport prcduct 2. PVC Resin for Tpe- 350 3.PVC PlasticLtt ehosphate/DOP ′TCA/TAP/DPAノD10P/TCEP/REPFPS 50/REOFOS 95/ROSCAN/ SANTICIZE、REOFOS 508)for Tbpe_ 350 1.914 wSq.Meter Or export product Not←1:Patt shan dec10re specirlc dellier ill lLipplllg bllls alld Bills oF elltry alld both sh● 1l be correlated at thetime oF EODC. α涎以に W:鳳∬瀬 rl阻:1爵11:患:WI愕糊器ⅧL憮.md“ L」■ eぬe mmemm"“ "r RA mry trke coDsoquentisl .ctlotr r! per Pollcy / Procrdurca. PVC Solid Woven Frc Resistant Aュistatlc Conveyor Bchhg Type‐ 450 oNettOtal wcight ofbel ll 152 kg/sq. mt) 2230 Sq Meter 4.Polyester Filament Yam(1000/1500 Dcllie→For Type‐ 450 l.Ut LgAS cont nt contalncd ln erport product 5. PVC Resin for Type- 450 6 PVC Plasticレro■oSphate/DOP ′TCA/TAP/DPA/D10P/TCEP/REPFPS SAMICI'T、REOFOS 508)for Type_ 450 1.946噛。Meter Or expre prOduct Note-l: Party shrll declare specllic denier in shipping bilk rnd Bills of entry rnd both lhrll bc corr€latcd rt thc timc of EODC LAil-. Note.2: RA ney call for net contents o9{nput ltcmt itr the erport ltem rnd crlcuhte thc entillcmcnts s3 pcr rbove decfuioD 8trd tlke comequcntisl rction as per Policy / Proccdur6. RA mry trke coNcquentLl rctlon rt pcr Policy / Proccdurca. PVC Solid Woven FれResistant Anustatic cOnveyor Belthg Typc‐ 600 octtOtal wcight ofbcl 12 835 kg/Sq mt) 7.Polycster Filament Yam(1000/1500 DenねつFor D"‐ 600●ol Lenm 1200) l,flt lIAg cotrtctrt contrbd h crport product 8. PVC Resin for Tlpe- 600 3.Gll lglSq. nctcr of Grport prcduct 9 PVC Plastlcセ∝chOSphate/DOP/ TCA/TAP/DPA/DIOP/TCEP/REPFPS 50/ REOFOS 95/ROSCAN/SANTICIZEヽ REOFOS 508)for Type_450 2.005 l8/lsq. Mclcr of .rport prod[ct 絣蒲 :碍f81i]if‖]ill, UdyOg B百昴att New DdhH10“ 1 2.925り助.meter Or e=port product

‐ Note'l: P.rty lholl declere specillc denier ln thippirg bltlr end Bllk of cntry .nd both ihdl bc corr€trted rt the tlmc of EODC, Note-2! RA msy ctll for net conteD8 of input ltcDs ln the erport lt€m and calculate ahc cntltlement! r! pcr eboye decilion and trkc consequentirl sction it pcr pollcy / procedures. RA miy take consequential rction er pcr Pollcy / Proccdures. PVC Solid Woven Frc Resistant Antlstatic Conveyor Beithg Type‐ 600●oll Le唖Ⅲ1000)Oet tOtal weight ofbel 12.835 kg/sq mt) 10 Polyester Filamcnt Yam(101111/15CXl Denierl For Type‐ 600(Roll Length 1000) l.Gt L8/Lg cotrtetrt sontrircd ln cxport product 1l PVC Rcsh for Type-600(Roll Length 1000) 12 PVC Plasticizσ ehosphate/DOP ′TCA/TAP/DPA/DIOP′TCEP/REPFPS SANTICIZER REOFOS 508)for Tbpe_ 600 oRo■Lcngth 1000) 2.lXX l8lsq. Mcicr of crport product Note'l: PerB shall declare specific denier ln rhlpplng billr and Btllr of entry atrd both ihrll bc correlsted st the time of EODC. agLl- Note'2: RA may call for net cotrtents offnput ltemc ln thc erport item rnd c.lculrte the entitlementc aJ pcr rbove decision rnd take consequenthl rctlon as prer Pollcy / Procedures. RA mry takc consequentirl rctlon as p€r Pollcy / Proccdur€s. PVC Solid Woven Ftt Rcsistant Antstatlc Co■veyor Belting Type‐ 750 oettOtal wcight ofbel 14 450 kg/Sq mt) 13 Polycster Filament Yam(1000/1 5tlll Denierl For Type_750 1.05 LgAS conteni contrlncd ln crpont product 14. PVC Resin for Type- 750 15 PVC PI"iciar ehOSphate/DOP ノTCArAP/DPAノD10P/TCEP/REPFPS SANTIC122、REOFOS 508)for Type_ 750 2.2176 \gl$, Metcr ol erport product Note-l: Prrty 3hrll dechre specllic denier ln rhipping bilh end Blllr of entry end both shell bo correleted rt the time of EODC. o ,{l_ Noto.2: RA mry call for tret cotrtent! ofninput itemr in the crport ltem rnd c{lcuhtc thc cntitlcmenk rs per above decision and tske consequential action as per Pollcy / Proccdure. RA mry trke comequeutial .ctlon as pcr Pollcy / Procedurer. 鼎灘l職郡即 Udyog Bhawan,Ntt Delhi‐ 1looll

ヽ ） PVC Solid Woven Ftt Resistant Anis●ic Conveyor Bolmg Type‐ 3500 oettOtal weight ofbe■ 12.176 kg/Sq mt) 16 Poしester F■ament Yam(10∞/1500 Denicrb For Type_3500 1.05 kgAg contcnt cont ln.d h export plduct 17.PVC Resh for Ъ申‐3500 ■42“ "パ 詢.meter or exPore product 18 PVC Plastlctt choSphatc/DOP ノTCA/TAP/DPA/D10P/TCEP/REPFPS SANTICIZEL REOFOS 503)for Tbpe_ 3500 2.5725 lglsq. Mcter of erport product Notel: Prdy shsll declare rpecilic denier ln rhippitrg blllr rtrd Bilk ofontry.nd both shdl b€ correhtcd rt th€ time of EOIrc. Note'2: RA mry crll for net coot"ot offit"ms in thc erport ltem rnd calculrtc thc entltlements as per rbove decision rnd tske coNequenti.l eiiion as pcr Policy / Procedures. RA msy tske com€qucnthl rctlon rr pcr Policy / Proc€dure& PVC Solid Woven FLo Resistant Antistatic Conveyor Belthg Dpe‐ 6000 Cover Thickness(20ヽ61 +20ヽ価1)0ヾCttOtal weight of belt 14 297 kg/Sq mt) 325 Sq Meter 19 Polyester Rlamem Yam(1000/1 51Xl Denicrl For Type‐ 6000 Cover Thickncss (20 MM+20M卜の l.ll5 lgAg contGtrt coDtrhcd lr erport pmduct 20 PVC Resln for Typc‐ 6000 Cover 釉ckness(2 0 NIIM+20～]MD 3.αB晩パ綺・meter Or expore product 21 PVC Plasticttr ehosphate/DOP ノTCA/TAP/DPA/DIOP/TCEP/REPFPS SAN■CIZEx REOFOS 508)for Dpe_ 6000 Cover Thickness(20 MM+20 m 2.726 tglSq. Meter of €xpora product" NotG'l: Porty shall declore spcclllc denler ln rhlpplng bllb rnd Bllb of entry .nd botb rhlll be corrclrtcd rt Note2: RA may call for net cotrtents ofltrput ltcm! ln thc crpora ltcr .nd crlcuht! thc entltlement! ar pcr ebove dccLrlon and takG conloqucntlrl rctlon o! per Pollcy / Prcccdurcs. RA mry take coNequentlrl octlon ss pcr Pollcy / Prccedur6. PVC Solid Woven Flre Resistant Antistatic Convcyor Bcltlng Typc‐ 6500 Width(1067 MMD●ct total weight ofbelt 14 683 kg/Sq mt) 22 PoしestCr Rlament Yam o000/1500 Dcnlerl For Typc‐ 6500 Width(1067 MD l.Ut lg/tg contont contrhcd ln crport prlduct 23.Nylon Yam Type‐ 6500 Width(1067 剛 ) l.flt LgAg contctrl contalrcd ltr crport prcdrct |:l il:|‐ ‐| こ:,ヽ:l ,1 鳩 い

24 PVC Resin for Type‐ 6500 Width (1067 ⅣM 3.7“ LFq.meter Of ●=port prod●ct 25 PVC Pl“ici四(Phosphate/DOP ′TCA/TAP/DPAノDIOP/TCEP/REPFPS SANTICttRξ REOFOS 508)for Type_ 6500 Width(1067mつ 2.425 kg/sq.Meter of export product 26 Fastener wm puls“ atO Type-35/ 37/37A/37A1/38/38A/38A+)ombers ofPhs per Ron)Type 65041 Width(1067 m Netto net Note-l: Party sbsll declarc specllic denicr in 3hlpplDg bllb rnd Btlls of enttT atrd both shrll bc correlated at thG time of EOIrc. No62: RA mry clll for net contents offi1,".r iD thc crport ltcm snd crtculrte thc entittcm€trB ns p€r rbove decision rnd take conscquetrtl.l rctlon as per Policy / Procedure. RA moy trke consequentiol action as per Policy / Procedures. PVC Solid Wovcn FIo Resistant 施istatおConveyor Bdttg Type‐ 6500 Width(1219 MhのOet total weight ofbc■14 683 kg/sq mt) 2379 Sq Meter 27 Polycster Filament Yam(1000/15∞ DenieつFor Tbpe‐ 6500 Widal(1219 卿 l'lxt Lg/Ig cotrtcnt contrhad ln erport product 28 Nylon Yarn T"e‐ 6500 Width(1219 MM) ll.Ut lgftg contont contrlncd ltr crpori product 29 PVC Resh for Type‐ 6500 Width (1219 MM) 30 PVC PlasticLσ ehosphate/DOP /TCA/TAP/DPA/D10P/TCEP/REPFPS SANTICIZEヽREOFOS 508)for Type_ 6500 Width(1219やmの 2.,12{5 lg6q. Metcr of srport product 31 Fastener wm pms(MatO Type-35/ 37/37A/37A1/38/38A/38A+)oumbers ofPhs per RolD TypC 651111 Widぬ (1219 1ソ1lИ ) Note‐1:Pa‖γ ghan dechre specirlc delller in shippillg bilL BIld Bllls●r entry●nd both lLall be correhted at thetime or EODC. _ 漱篤鳳∬灘 Tl出驚器織憲Ⅲl留■↓ⅧL惚.md“ LJ“e tte m■■ mm"""r RA Illay take consequentia1 3CtiOn as per Poll● yノProcedures,

PVC Solid Woven Fむo Resistant Antistatic Conveyor Belthg Type‐ 3000 Wmぬ(lo67 MM)Ro■ L●■山500 Fr.oett。●l weight ofbe■16.907 kg/Sq.mt) 5530 Sq Meter 32.Polyester Rlamem Yam(10CX1/15KXl DenL→For Type‐ 31Xltl Width(1067 ⅣDИ),Rol Length 51111 FT l.(xt kgAg contctrt cotrtdncd ln erport prcduct 33 PVC Resh for Type‐ 3000 Ⅵdth W遍山(1067やmの,Roll Length 500 FT 34.PVC PlasticLerehosphate/DOP ′TCA/TAP/DPA/D10P/TCEP/REPFPS SANTICIZEL REOFOS 508)for Type_ 8000 Width o067剛),Ro■Length 500 FT 2,7qり疇ぃ、。Meter or e=port producc Note'l: Party shrll declare sp€clllc denicr h shlpplng blllr end Blllc of entry and both shetl be correhted rt the time of EOIrc. o ,al)* Note'2: RA mey crll for net contents ofnput itemr lo tbe crport ltem aDd crlculate the entitlcments rr per rbove decision and take cons€quetrtlal action as per Policy / proccdures. RA mry trke coNequential sctlon sr pcr Pollcy / Procedur6. PVC Solid Woven FれResistant Antistatic Conveyor Belthg Type― 8000 Width(1067 ⅣWD Roll Le■Ⅲ547 FTいo total weight ofbc■16.907 kg/Sq mt) 1068 Sq Meter 35 Polyester Filament Yam〈1000/151111 DenieうFor Typc‐ 8000 Width(1067 ルM,Roll Length 547 FT 1.05 kgAg contcnt cotrt incd ln erport product 36 PVC Resh for T路 "‐ 8000 Width Width o067 MM,RoI Lcnm 547 F「 37 PVC Plasticレo ehOsphate/DOP ノTCAITAP/DPA/D10P/TCEP/REPFPS SANTICIZER REOFOS 508)for Typc‐ 8000 Width o067 m,Ro‖ Lc"h547 FT 2.708 Lg/Sq.Meter of export product Note.l: Psrty shrll declare specilic d€nier in shippln8 bllb and Bllls of entry and both shrll bc correlrted et the time of EODC. Ar_.1r. Notc2: RA may call for net coEtenb ol!trput item! in the erport ltcm rnd crlcuhtc the entltlcments rs per above decislon and trke consequcntirl rction as per Pollcy / Procedur6. RA may tske coNequcntial action $ per Policy / Procedurcs. PVC Solid Woven Ftt Resistant Antistatic Conveyor Belttg Type‐ 8000 Width(1219 MD Roll LcⅢ 660 FT octtOtal weight ofbclt 16.907 kg/Sq.mt) 38.Polyester Rlamem Yam(1000/15tXl DenieつFor Type‐ 30ul Wid山(1219 ⅣWD Roll Lcngth 660 FT l.Gt LgAS contcnt contrlncd ln crport Produet 39。Nylon Yam Typc‐ 8000 Wid山(1219 ヽ■VD Roll Lengtb 660 Fr 1,05 kgAg content contrlncd ln erport product Foreigr Ⅲ ・3&::|1棚累 i17品肛 uまり ,dyog Bhawan,New Dolhi‐ 110011 EXPORT ITEM QTY IMPORT ITEM QTY ４ ９ ０ ６ 町 』

40.PVC Resh for恥‐8000 Widul WMぬ(1219 MD Roll hgth 6alF「 . 4"97“頭綺.meter Or αport product 41 PVC Pl"dcttrehOsphateノDOP ′TCAITAP/DPA/D10PrCEP/REPFPS SANTICIZE、REOFOS 508)for Type_ 8000 Width(1219 Mho Roll Length 660 FT 2.689聰パ|.Meter or expor prOduct 42 Fastener with pin.o4atoい-35/ 37/37A/37A十/38/38A/38A+)sumbers ofPhs per Roll)Type 8000 Width(1219 ヽ■MD Roll Length 660 FT. Net to llet Notc-l: Prrty thrll dcclere rpcclllc dcnicr lr rhlpphg bllb rnd Blllr of entry rtrd both rhrlt bc corrclrtld rt thc tlme of EODC. o ,A.f- NotG2: RA mry crll for net oontcnts olfnput ltemr ln tha crport lism rnd calcuLtc the cntltlcmeDt! s! per rbovc docillon and trkc conacquetrffd ectlon er pcr Pollcy / Proccdurcr. RA mry take consequcntisl action lr per Pollcy / Procedura. PVC Solid Woven Fre Resistant Antistatlc Convcyor Bol如B ηpe‐ 8000 Width(1219 MM)Roll Lngth 800 FT Na to●l WCight ofbe■16 907 kg/Sq mt) 1189 Sq Mctcr 43 Polyester Filament Yam(1000/15∞ Denierp For Type‐ 8000 Wid■l(1219 MりRom Lcn帥800r l.Ut lSAg contctrt cotrtdncd lr etport product 44 Nybn Yam Type‐ 8000 Width(1219 MM)Roll Lllgth 800 FT 1.05 kgAg coDtcnt cotrtalrcd ln crport product 45.PVC Resin forl噺 "‐ 8KlllKI Widdl Width o219 m Rol Lngth 800 F「 46 PVC Plastictt ehOsp・・ね/DOP ′TCA/TAP/DPA/DIOP/TCEP/REPFPS SANTIC17ER REOFOS 508)for Typc‐ 8000 Width(1219MつRol Lem 800 FT. 2.68 kglSq. Meter of erpora product 47 Fastcller wm puls olatO Type-35/ 37/37A/37A+/38/38A/38A+)●mbers ofPins per Roll)Typc 8000 Widul(1219 Ш Rol Length 800 FT Note-l: Prrty shrll declare spcclllc denicr ln shlpplng bllk erd BllLr of entry and both rh.ll bG corrclsted rt the time of EODC. , o.el* Note'2: RA msy cslt for net contents ofnliput itcm! in the erport item and crlculrte thc cntitlemcnt! as pcr rboye decbion ond trke consequentirl rctlon as per Policy / Procsdur6. RA msy take consequetrtial sction as per Pollcy / Prccedures. 403LFq.meter Of export product

PVC Solid Woven FLo Rcsistant Antistatic Conveyor Beltmg Type‐ 8000 Width(1219 MM)Roll Length 1000 FT oettOtal weight ofbcl 16 907 kg/Sq mt) ２ ９ ７ ３ 鋒 』 48 Polyester Filament Yam(1000/151Xl Denterl For Ъpe‐ 81X10 Widal(1219ヽmの Ron Len帥 101111 FT. l.lXt tgAg contcnt contalrcd ln crport pruduct 49 Nylon Yam恥‐8000 Width〈1219 MⅣD Roll Lcngth 1000 FT 1.05 *g/lg coDlent cotrtrlncd ln export product 50 PVC Resh for Type‐ 8∞OW組ぬ Widぬ(12191贔のRoll Lngth 10011 F「 . 4.030 vSq.meter of αport product 51 PVC Phttciなr ehOsphate/DOP ′TCA/TAP/DPA/D10P/rcEP/REPFPS SANTIC2ER REOFOS 508)for Typc‐ 8000 Wid山(1219 Vho Roll Lcngth 1000 FT 2.689り釣.Meter Or export product 52 Fastener wn pllls。4atO Type-35/ 37/37A/37A■/38/38A/38A+)oumbers ofPins per RolD Type 8000 Wid血(1219 MM)Rou bngth looO FT Note.l: Party shrll declare spcclfic denier in rhipplng bllb rnd Bllb of cntry and both rhell bc corrGlatcd at the time of EODC. p ,rJL- Note'2: RA m8y crll for nct contcnt! oflnput iteD! ln tbe erport ltem rtrd crlculrtc the cDtitlcments rs per rboye decision rnd trke consequentisl rction rs per Policy / Procedures. RA may tske conscqucntial action as per Pollcy / Procedurca. PVC Sold Woven Fire Resistant Antlstanc Conveyor Bel“B Type‐ 10000 Width(1372 MttD Roll Le理由800F「.settOtal weight ofbelt 17 790 kg/Sq mt) 3346 Sq. Mctcr 53 Polyester Filament Yam(1000/1500 DenieうFor Type‐ 10000 Wldth(1372 ヽ□И)Roll Lngth 800 FT l.U, L8llg coDt nt cotrt lDd ln crport product 54 Nylon Yam Type-10000 Width (1372 MM)Roll Leng山800 FT l.Ut lgAS conlcnt cotrtrh.d ln Grport pt.(,duct 55.PVC Resh for Type‐ 101X10 (1372Ⅳ呻Rol L… 80CI FT 56 PVC PlasticLo(PhOSphate/DOP ′TCA/TAP/DPA/D10P′TCEP/REPFPS SANTICIZE、REOFOS 508)for Type‐ 10000 Width(1372 MM)RoI Length 800 FT 2.3351u助.Meter Of exPort product 57 Fastener wtt puls(MatO Type-35/ 37/37A/37A1/38/38A/38A+)oヾumbers ofPlns per Ro11)Type‐ 10000 Width (137211M)Roll Lengh 800 FT Note‐1:Pa“りlh●ll dechre sFinc denler ill sLippillg bilL 8nd BIIL of elltry● nd both shali be correlated at thetime of EODC.

Note-2: RA may crll for trGt content! rbove dcclslon rnd take conrcquentlrl Itcmt lr thc crport llcm rnd crlculrL thc cntltlGmont! rr pcr as p€r Pollcy / Procedures. RA mey take comcqucntlrl rctlon rr per Pollcy / Proccdurcs. PVC Solid Wovcn Fre Resistant Antlsmdc cOnveyor Belthg lbpe‐ 10000 Wldth(1372 NIM)Roll Length 500 FT●ettOmi weight ofbel 17.790 kg/Sq mt) 1673 Sq. Mctcr 58 Polyester Filament Yarn(10KX1/15∞ Denierl For Type‐ 10000 Width(1372 Ш Rol Length 500 F「 1.05 ISA8 contcDt cont lncd lr Clpora product 59 PVC Resh for Type_lo∞o Wid■ (1372 MM)Roll Lcngth 500 FT 60 PVC Phsticttr ehosphate/DOP/ TCArAP/DPA/D10P/rcEP/REPFPS SANTICIZEヽREOFOS 508)for Type_ 1000KI Width(1372 MM)Roll Length 500 FT 3.074 lg/lSq. Mcter of crport prodrct Notc-l: Psrty shrll declare specific denier in thlpphg blllr rnd Bllls of cntry and both !h.ll bc corrchtcd rt Note-2: RA m.y crll for net conGnE ol.ltrput itcmr ln thc Grport ltcn rnd crlculrte thc Gntlthnetrtr .! pcr above decision snd trke consequentlel sctiotr ss pcr Pollcy / Proccdur$, RA msy trke coNequential rction as per Pollcy / Proccdurcs. PVC Solid Woven F“ Resistant Antistatic Conveyor B●■hg Type‐ 1001XI Width(1524 MM)Roll Length 800 FT.●ct tOtal weight ofbel 17 790 kg/Sq mt) 12266 Sq Meter 61 Polyester Filament Yam(1000/1 51Xl DenieりFor Type‐ 10000W週ぬ(1524 ヽOVD Roll Length 800 FT l.Ut k8A8 cotrtent contrimd ln Grport pruduct 62 Nylon Yarn Type‐ 10000 Width(1524 MM)Ro‖ Length 800 FT l.Ut kg^g cort nt contrircd ln Grport ptoduct 63 PVC Resin for Type‐ 10KX10 (1524動Rol Lcngth 800 FT. 4.278Lrq.meter or ●=pore prodllct 2.335 Lg/Sqo Meter oF expore prodll●t 64 PVC PI“uctt chosphatcノDOP/ TC〃TAP/DPA/D10P/TCEP/REPFPS 50/ REOFOS 95/ROSCAN/SANTIC22ヽ REOFOS 508)for Type‐ 10000 width (1524 ⅣDИD Roll Lcn帥800 FT 65 Fastcner with pins(Mato Type_35/ 37/37A/37A十/38/38A/38A十)ONmbers ofPIns pcr Roll)T"e_loO∞ Width (1524 MMD Roll Length 800 FT NotG-l: Psrty shall declarc speciflc denier in shipplrg bllk end Blllr of entry and both rhell bc correlstcd rt the time of EODC. eAil^_ Note.2: RA may call for tret contcnB offnput ltems ln the erport item and cslculrt€ ihe entitlements rs pcr above declslon rnd tske consequentirl action ar per Policy / Procedures, RA may take consequentirl sction a3 per Policy / Pmcedures. 囃鼈輛 ^ 3.908 Lg/Sq.meter of export product

Cage No.A‐117 M/g ZENIrH INDUSTRIAL RUBBER PRODUCTS PVT,LTD HQF No 01/87/50/Ol1295/AM15/DES‐ VII Statt18: Approved NC N●.:15/AM17 Dt:21&26.414.2017 Adv Lic No 0310788486 dated 28 08 2014 RLA F No 03/95/040/00442/AM15 SutteCt:Amendment in the descr:ption of ExpOrt product●3ahst Advance Autho『12●t:On No.o310788486 dated 28.03.2014. Decislo■:T he Conlmi“ e considered tt request of irm and decided to amend export tem from“ Hlgh Abrasion ReJstance Sheetlngs・7to■braslon ReJmance sheetin♂ RA may take collsequcllti● l actlo■o9per PollcyノPttodures. Su"eCt:FIxation oF ndhoc norms in respect oF Adv●■ce Authounat10n No.0510391593 dated 15.10.2014 Dection: As per the witten conlmcnts imished by thc D/oα しPC宙dc ther OM dated 18 01.2016,the Conlmittec approved followhg adhoc nontls.This decision applicablc only for dlis authon餡 jon,No repeatliccnce= EXPORT ITEM QTY IMPORT ITEM QTY Nylon 6/66 Compound(different gradcs) Polyamides 6/66 mediuln vis●osity l kg 1.Melamhe Cyanurate Melamine Cyanurate uc→ 0.H45 kg 2. Nylon 5 Chips Polyamide 5 Chips 0.6212 kg 3. Nylon 66 chips Polyamide 66 Chips 0 0642 kg RA mry trko consequcntial rctioD ar per Pollcy / Proc.durcr. Request: Enhancement ln the wange a‖ Owed by NC ag口inst Advance Author:28t:On N●. 0310796249 dated 27.05.2015, Decision: Thc Committce consider€d the request of authorisation hotdcr for enhanccment in thc quantity of impon item and it was decided to tum dowtr the request of authorisation holder maintaining the decision taken by NC it its earlier 嗅鼈i昴

Case No.A‐ 118

M/s. Ester lndustries Ltd., Mumbal HQF No 01/87′ 050/00317ノAM15/DESⅣ‖ Status: Approved NC No.:151AM17 Dt:21&26414.2017 Adv Lic No and Date D510391593 dated 15。10.2014 RA F.No.05ノ23ノ040/00245ノAM15

Case No.A‐119

M/s Guarn1lon lndb pvt Ltd" Mumbal HQ F No 01/87/50/158ハM16/DES‐ V‖ stams: Rejected NC No.:157AM17 Dt:21&26.04.2017 Adv Lic No.alld Date 0310796249 dated 27.05.2015 RA R No.03/94/m/00122/AM16 Meeting No.20/AM16 held ol1 21.012016. ^

^

Case No.A‐ 120

M/s uoyd lnsulaJons“ ndia)Ltd HQ F.No. 01/87/050/00227ノAM16/DESギ‖ stam: Dererred NC No.:15/AM17 Dt:21&26.い_2017 Adv Lic.No.and Date 031079725フ dated 15,07.2015 RAR N●03ノ95/040/∞203/AM16 SubieCt: Fixation oF ndLoc llormS in respect oFAdvallce Authorl"tio● No.0310797257 dated 15,07.2015 Decision:Thc Conlnlittee considered the case and decided to refer to DIPP Request: Flration of adhoc norms in rBpcct of Advancc Authoriz.tlon No. 301 flXtr824 drtcd 0:i.06.2013 Decision: The Committce considered the cas€ as per agenda and decided to call for the Import licence for resticted item fiom the authorisation holder. SubieCt::nduJon oftw●Export product against Advance Authodnt:on N● .0510245924 dt.15.07.2009. Dection:Tle Conllllmoe cOnsidered the request of lrm and dedded to add fouowing 2 addtlona:export tem:

1. White Alox Retort Pouch (Dimensio口120x180x34mm) lN●. 11% RclcvrDt Whit! Alor Lamlnate 0.4157 Sq.meter
2. White Abx Pouch Ollllengio■250x3StlxOmm) l No. 110/0 Relcvrnt Whlte AIor Lamitrate 0.073 Sq.meter RA miy tak€ consequential rction rs pcr Policy / Proccdures.

Case No.A‐253

M/s. ENtmrn Rechmations HQF No. 01/87/050/00131/AM14/DES‐ VⅡ Status: Dererred NC No:15/AM17 Dt:21&26.い_2017 Adv Lic No and Datc 3010094324 dated 03 06 2013 RAF No 30/24/040/00008/AM14

Case No.A‐256

M/s日oeterlndia Retort Pouches {P)Ltd HQ F No O1/87/050/00138/AM10/DESギ‖ S●●Is: Approved NC No.:15/AM17 Dt:21&26.04.2017 Adv Lic No and Datc 0510245924 dt.15.07.2009 RA F.No.05/24/040/∞228/AM10

Case No.A‐257

M/s日oeter!ndia Retort Pouches {P)Ltd HQ F No O1/87ノ050/00182ノAM10/DESW‖ StaEs: Approvcd NC No.:15/AM17 Dt:21&26.04.2017 Adv.Lic No and Date 0510248298 dt.25.08.2009 RA R No.05/24/040/00021/AM10 EXPORT ITEM QTY IMPORT ITEM QTY

1. Tnnspatut Alor Rctort Pouch (Dlmenslotr 135118513 50mm) l No. l. Rclcvrtrt TrruprrGnt Alor LrElnrtc 0.1164 Sq, Meter 2, Transparcnt Alox Retort Pouch @imension lE040r0mm) l No.
2. Rclcvrnt Trrnrprretrt Alor Lrminrtc 0.0811 Sq. Meter
3. TrrNparcnt Alor Retort Pouch (Dimemlon 250r350r0mm) l No.
4. Rclcv.nt Tnnrprrert Alor Lsmlnrte 0.194 Sq.Meter RA mly trke coDscquentiel action as pcr Pollcy / Pmcrdure. Subj€ct: lncluslon of three Export product atalnst Advence Authorlz.tlon o. 0510248298 dt. 25.0t.20O9. Decision: The Committee considered the request of firm and decided to add following 3 additional export item: Request: Fixntioll oF adhoc norms ill respect oF Advance AuthorL"tion No.3010087073d● ted 26.06.2012 for the export productFRecialm Rubber". Decision: llle Conlmtte considered the case as per agenda and decided to cali for the hport licence for resdcted im iom the authodsation holder

Subject: Amendment ln the descrlptlon of Erport Prdouct .t.ln3t Adyance Authorhatlon ,{o. 031079t149 dated

24.1t.2014 Decision: The Committee considered the case and decided to spprove the amendment as requested by the firm to read the Description of Export Item as sPolyvinyl acctatG Gmuklotr iolld coDtcnl56yo +l- l% (pecked ln 16fl) HM HDPE drums ond 5 ne begs)" lmtead of "Polyvlnyl rc.trtc copolymcr emuldon rolid contcnt 567o +/- l% (prckcd lD 1600 HM HDPEdrums & 5- flexi bags)".

Case No.A‐258

IWs. Eastman Reclamations HQ F No 01/87/050/00184/AM13/DES‐ VⅡ Status: Deferred NC No.:15/AM17 Dt:214L26.04.2017 Adv Lic No and Datc 3010087078 dated 26 06 2012 RAF No. 30/24/040/00013/AM13 Casc No.A‐259 MノSV:sen:ndust‖es Ltd. HQ F.No O1/87/050/00432/AM15/DESW‖ Statlls: Approved NC No.:15/AM17 Dt:21`L2604.2017 Adv Lic No and Date 0310791349 dated 24。11.2014 RA F.No.03/95/040/∞388/AM15 RA msy tskc comequcnthl rction sr per Pollcy / Prcc.durct

Case No.A‐260

Mrs SNF andia)Pvt Ltd. HQ R No 01/87/4H171X1530/AM14/DES‐ VII Ststw: Defcrred NC No.:15/AM17 Dt:21&X.04.2017 Adv.Li●No.ond Date 2610012322 dated 2001.2014 RA R No. 2"471H1/1XXXVAM14 h飾 "h Cmttc¨ dlC CaSe… 畑 ゎ"鮨"Dm 多 / 111ず■ :1:ず『噂:| . = 1‐1:` ' ハ ′

ONLINE CASES No.:71/15/87‐ALC172016 Name:SM IINDIA] PVT. Meet No/Date:15/87‐ ALC12016 18ι 26.04。2017 LicoNo/Date:2610012677 19.06。2014 Decision: The Committee considered the case as per agenda and noted that the e:eort ircm is not a chemical name brand name is given. Norms cannot be fixed for items that cannot be identified with their chemical structure. fore, the Commitlee decided to refect the case. HQ File:01/87/050/00162/AM15/ RLA File:07/24/040/00011/AM15/ Decislo■:The Commlitee considered the case and decided to refer to DIPP. No.:130/15/87‐ALC12016 Nalne:EAS■ⅥAN No/Date:15/87‐ 1/2016 l aζ 26.04.2017 卜 AⅢ∝3"4Ю4的∞%/AMげ 1蹴孵 B鋭∝ “"01 Decision: The Committee considered the case as per agenda and decided to call for the Import licence for restricted item from the authorisation holder. No.:22/32787‐ALC12014 Name:PARADISE Mcet No/Date:15/87‐ ,YMERS LTD., 1/2016 ldし26.04。2017 File:01/87/050/00298/AM15/ File 15/040/00487/AM15/ Lic.No/Date:0310788816 Decision : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation for submission of the following inforrration. ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for wartages claimed at each stage and each of the required in the manufacturing process. ) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use be fumished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for manufasture of each of HQ File:01/87/050/00464/AM17/

Case No.:921/87¨ ALC1/2014

PrりName:SANKHLA INDUSmS, Meet No/Date:15/87¨ l d126.04。2017 HQ File:01/87/050/00523/AM17/ product. Itatus: Rejected RLA File 26/24/040/00009/AM15/

No.:18/16/87‐ALC12015 Name:ESl匹EM No/Date:15/87¨ 1/2016 PVroLD, 18じ26.04.2017 Fllo:01ノ87/050/00141/AM16/ File LicoNo/Date:1710005969 12.11。2014 17/24/040/00114/AM15/ : A copy of reply received from finn was forwarded to Technical Authoritr No.:64/18/87‐ALC1/2015 Name:VISION PRODUCTS No/Date:15/87‐ 1/2016 DeFerred ldじ26.04。2017 File:01/87/050/00234/AM16/ RLA File:34/24/040/00076/AM16/ 10041344 12015 rn : The Committee considered the case as per agenda ana aeciaea@ for submission of the following information. ) Technical descriptions/specifications, percentage composition (by weight) of the products to be e:cported. ) Detailed manufacturing prooess along with technical justification for wastages claimed at each stage and each of the Chemical name, Technical specifications of items proposed to be imported. be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicated. ) Material balance indicating calculative stat€ment ofthe requirement of each of ircm for manufacture of each of product. No.:2220/87‐ALC12015 INo/Date:15/87‐ 1/2016 Deferred l dι 26.04.2017 File:01/87/050/00266/AM16/ RLA File:03/94/040/00324/AM16ノ icoNo/Date:0310797923 : A copy of reply received from firm was fonparded to Technical Authority. No.324/20/87‐ALC12015 Name:PID]LITE No/Date:15/87‐ LIMIπD ALC1/2016 18ι 26.04。2017 LD 「QⅢ∝咄肪∽ "“ハ mα l rn : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation for submission of the following information: Technical descriptions/specifications, percentage composition (by weight) ofthe products to be erported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the ials required in the manufacturing process. be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative stat€ment of the requirement of each of item for manufrcture of each of ヽ lANT10XIDANTS PVT.LD. product.

File:01/87/050/00288/AM16/ No.86/21/87‐ ALC1/2015 Name:WEILBURGER I 、TINGS(INDIAp PRIVA‐ No/Date:15/87¨ 1/2016 l a526.04.2017 Lic.No/Date:0210206269 10。11.2015 )n : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation ) Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. t) Detailed process along with technical justification for wastages claimed at each stage and each of ther ) Chemical n4me, Technical specifications of items proposed to be importe.d. Whether the scrap genented h the process is being reused or not.rnot the technicaljustiEcation for its be mished.Ifthe scrap is being solt the sale value/comlnercial value may be indicated. ) Marcrial balance indicating calculative statement of the requirement of each of ircm for manufacture of each of product。 No.:2"1787‐ ALC1/2015 Name:INDICA No/Date:15ノ87‐ 1/2016 LIM1lED l aι 26.04.2017 1210009514 。11.2015 :AD/L No.7/26/2017‐ TSW dated 19.01.2017 was issued by DIPP to dle applLant.Reply ttill awaited. the Committee decided to issue reminder to the applicant grving 15 days time for submission of the To indicate complete specification of conveyor beltto be e)port€d. Weight ofbelt in kg. term per Sq. Mt. area. ;) Production of the export product viz-a-vtz.- consumption of all the raw materials (both imported and indigenous) for last three years duけcertined by CA. No/Date:15/87‐ 1/2016 18じ26。04.2017 File:01ノ87/050/00003/AM17/ RLA File:31/83/040/00109/AM16ノ 110065773 。11.2015 :AD/L No。725/2017‐ TSW dated 18.01。2017 was issued by DIPP to dle applicanto Reply still the Committee decided to issue rcminder to the applicant gling 15 days time for submission of the Complete calculation for requirement of raw materials for manufacture of each export ircm (preferably group ing same import items). ) Weight of each export item in kg. terms and also to indicate import content in each export ircm. r) Complerc details/Generic name with specification and also its uses of import item no. 6,E,9,11,12 &13. Production of the export product viz-a-vqconsumption of all the raw materials for the last three years duly by CA. 憾:輛響‖脚 ソog Bhawan,New Delhi‐ 1loo File:01/87/050/00302/AM16/ RLA File:12/24/040/00004/AM16/1 No.:1/2/87‐ALC1/2016 P釘りNallle:FPIINDUSTRIES PRIVATE LIMITED 10

^ No/Date:15/87‐ 1/2016 18じ26.04.2017 File:01/87/050/00367/AM16/ ,No/Date:0310800626 AM16/ 。12.2015 rn : The Commitee considered the case as per agenda and decided for submission ofthe following informuion. issue deficiency letter to the authorisation Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stsge and each of the Whether the scrap generated in the process is being reused or not. If not the rcchnical justification for its be furnished. Ifthe scrap is being sold the sale value/commerpial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of itcm for manufacture of each of product. No.:10/1/87… ALC12016 Nnme:COVESTRO(INDIAl ATE LIMIttD l a526.04。2017 File 「QⅢ釧"傷∽ "“晨Ⅲα File:03/94/040/00555/AM16/1 No/Date:15/87‐ 1/2016 LicoNo/Date:0310801704 11.01.2016 Technical descriptionVspecifications, percentage composition @y weight) ofthe producs to be exaorted. Detailed manufactruing process along with technical justification for wastages claimed at each stage and each of the ials re.quired in the manufacturing process. r) Chemical narne, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justificuion for its non-use be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Marcrial balance indicating calculative stat€ment of the requirement of each of ircm for manufacture of each of product. No.:15/11787‐ALC12016 Name:ARKEMA Meet No/Date:15/87‐ INDIA PVTo LTD., 1/2016 l dι 26.04.2017 : The Committee considered the case as per agenda and decided issue deficiency lett€r to the authorisation Technical descriptionVspecifications, percentage composition (by weight) of the products to be e:rported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the be ftrnished. If the scrap is being sold the sale value/commercial value may be indicarcd. Material balance indicating calculative statement of the requirement of each of item for manufacture of each of I 鸞源 Name:ASI田りいE》INDIA ATE LIMIm HQ File Ю1/87/050/00253/AM17/ File:03/94/040/00841/AM16/1 18.01.2016 product. 12 Itatus: Deferred

No.:39/1r87‐ ALC1/2016 Name:SWASTIK POLYMERS Meet No/Date:15/87‐ IALC1/2016 pl&26.04.2017 「QⅢ∝ O1/87傷的 "%ハm″ RLA Flle:05/24/040/00512/AM16/ 10397369 1.2016 Decision : The Commiuee considered the case as per agenda and decided issue deficierncy letter to the authorisation Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the required in the manufacturing pr@ess. be fumished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Marcrial balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:2978/87‐ ALC1/2016 PaりName:WELSET PLAST No/Date:15/87‐ 1/2016 PVT.LTD。 lよぅ26.04。2017 File:03/95/040/00780/AMl Lic.No/Date:0310801957 1.2016 : The Commitrce considered the case and decided to refer to DIpp. No.33説/87‐ALCl′2016 Name:SRF LIMITED No/Date:15/87‐ 1ノ2016 Deferred laじ26.04.2017 File:01/87/050/00035/AM17/ RLA File:04/24/040/00222/AM16ノ 10161554 1.2016 rn : The Committee considered the case as per agenda ana deciA"d Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be e:rported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the ) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its y be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative stalement of the requirement of each of item for manufacture of each of xport product. ＝ ” ｕ 」 15 Stetus: Dcferred

P田けName:INTERNATIONAL lCONVEYORS LIMITED No.:12/8/87‐ ALC12016 No/Date:15/87‐ 1/2016 Approved 18じ26.04.2017 File 10802100 1/87/050/00124/AM17/ :03/94/040/00870/AM16/ 101.2016 As per the writrcn comments furnished by the DIpp vide their let0er No.726■op015/TSW 1.2016, the Commitee epproved following adhoc norrrs: No.:1022/87‐ ALC1/2015 Name:ALP OVERSEAS INo/Date:15/87‐ 12016 :LD. l aζ 26.04.2017 File:01/87/050/00343/AM16/ LA Rb Ю523ん4Ψ “ “ /AM7脇 刷辮 Ю釧 "9750 PVC SOLID WOVEN FIRE RESISTANT ANTISTATIC CONVEYOR BELTING TYPE¨ 10000 00 WeightofExpo■ Products per Square meter 19.105 Kgs。) 9872.000 Sq Meter 1.POLYESTttR FILAMENT YARN ofrelevant denier (10∞Denieノ1500 deme→ 1.05 kg/kg content contains in Export Product 2.PVC PASTE RESIN 4.FASTENER WITH PINS 5。NYLON YARN (1260 DENERY oYLON 6HT Note'1:PartyshalldeclarespeciIicdenierinchippingblllsandBillsofentry"m atthetime of EODC. PVC SOLID WOVEN FIRE RESISTANT ANTISTATIC CONVEYOR BELTING TYPE‐ 10000 Net Weight ofExport Products per Square meter 20.055 Kgs.) 960.000 Sq Meter 1.POLYESTER FILAMENT YARN ofrelevant denier (1000 Denier/1500 denierD 1.05 kg/kg content contains in Export Product 2.PVC PASTE RESIN 4.FASTENER WITH PINS 5.NYLON YARN o260班剛∋moN6Ⅲ 二畳坐11260D呻 1.05 kglkg content contains in Export Product Nob18 Patt sha‖ d∝htt specmc denbr correhted atthe time ofEODC. Note-2: RA may call for net contents of input items in the erport item and calculate the entiflements as per above decision and take consequential ectlon os pcr pollcy / procedures. :Th Conllllittee cOnsidered the case and decided tO refer to DIPP. YARN 1260 D

PartyName:VISEN No.:4/2/87‐ ALC1/2016 HQ File :01/87/050/00006/AM17/ RLA File :03/95/040/00133/AM16/ Meet No/Date:15ノ87‐ ALC1/2016 1212L26.04.2017 10.03.2016 Approved Decおlon: L Conmitte considered tte case and decided to approve on repeat b"Lは dhOC NomsD baSed On decision oftte NC Mceting No.31ノ87‐ALC1/2013 held on 30。10.2013 and recommended as under: EXPORT ITEM QTY IMPORTITEM QTY Vam Acrylate Copolymer Emulsion Solid Content 50%1/‐ 1% eacked h D―s) l kg l. Vinyl Acetate Monomer 0.43600 kg 2. 2-Ethyl Horyl Acrylate 0.04400 kg 3. Hydroxy Ethyl Cellulose 0.00167 kg 4. Silquest Silane 172/Geniosil GF 56(OrganO Fmctional) 0.00125 kg 5. Emulsogen LCN 287 0.01710 kg 6。 Foamaster‐ S 0,00005 kg 7. Sractant 0.00505 kg 8。 Sodium Lawi Sulphate 0.00505 kg 9.High Density Polyethylene o10W Moulding Grade) As per packing policy RA may take consequentisl action as pcr policy / prccedures. No.:52/87‐ ALC12016 Name:VISEN INDUSTRJES, lMeet No/Date: I 5/82- 1/2016 laぅ26.04.2017 「QⅢ∝側 8m5∽∞ "ハm71 Rb Ю3″5/040/00263/AM16/した。 No/DateЮ 310803206 ln : The Committee considered the case as per agenda -d for submission of the following inforrration. ) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported. r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the chemical name, Technical specifications of items proposed to be imported. y be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of rxport product. 1螂 ( Vernment 01 aWan,New f

「 IcNo"船 猟LCl畑61
躍 湘 警∬ 解 | 「 QⅢ∝ΨTΨ鋭 4/AM″ 脇描 OЮtt6岬ψ ttTl釧TTT I Approved Decision: The Committee considered the case and decided to sppnovc on repeat besis (Adhoc Normsl UaseA the decision of the NC Meeting No. lll$7-ALClD0l2 held on 20.06.2012 and recommended as under: EXPORT ITEM QTY IMPORT「EM QTY Butyl Acrylate and Methaclγ lic Acid COpOけmer Emulsion (Solid COntents 50%+2%) l kg l. BntylAcrylate 0.2193 kg 2. Methyl Methacrylarc 0。2600 kg 3.High Density Polyethylene 010Wing Gnde) As per packing policy RA may take consequential action as per poticy / procedures. No.:6″/87‐ALC1/2016 Name:VISEN INDUSTRIES I lMeet No/Date: I 5/gE 1/2016 l aζ 26.04.2017 File:01/87/050/00008/AM17/ Flle:03/95/040/00334/AM16/ ,No/Date:0310803234 111.03.2016 rn : The Committee considered the case as per agenda Technical descriptionvspecifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of ttre No.872/87‐ ALC12016 Name:VISEN INDUSTRIES No/Date:15/87‐ 1/2016 l a326。04.2017 File:01/87/050/00009/AM17/ 1 File:03/95/040/00335/AMl rn : The Committee considered Ure case as pu u ) Technical desoiptions/specifications, percentage composition (by weight) ofthe products to be e:rported. r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the r) chemical name, Technical specifications of items proposed to be imported. ) whether the scrap generated in the process is being reused or not. If not the technical justification for its nay be furnished. tf the scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative stat€ment ofthe requirement of each of item for manufacture of each of prOduct. chemical name, Technical specifications of items proposed to be imported. whether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its ty be firnished. Ifthe scrap is being sold, the sale value,/commercial value may be indicated. Material balance indicating calculative statement of the requirement of each of item for manufact,re of each of / ネ′ :ぃ,_1,..^`ハ_I‐ ~・ ~・・vi v:u:: ::dヽ Л‖説翼野 111,:酢僣‖ニ

^ se NoJ″ だ7ALα ″m6牌 柵 αⅥSttINDUSШ 鵬 厩 鮒 管ぽ 7 F蕗 T∝ 側椰 的剛3晨m7LAⅢ ∝酬%畑的餌35/AM貯 [躍TttЮ Ю 郷 「 ~ じision: The Conlmittee considered the casc and decided to approve On repeat basls(Adh∝Norlns)based decision ofthe NC Mceting No.11/87‐ ALC1/2012 held on 20.06。2012 and recommended as under: EXPORTITEM QTY IMPORT ITEM QTY Butyl Acrylate and Methacrylic Acid Copoumer Emulsion (Solid COntents 50%+‐2%) l kg 1.Butyl Acrylate 0.2193 kg 2. Methyl Methacrylate 0.2600 kg 3. High D€nsity Polyethylene @lowingGrade) As per packing policy RA may take consequential action as per policy / procedures. File:01/87/050/00309/AM17/ rn : The Committee considered the case as per agen ) Technical descriptionvspecifications, percentage composition (by weight) of the products to be exported. ') Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use: nay be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative statement of the requirement of each of ircm for manufacture of each of No.:34/13787‐ALC12016 No.325/8/87‐ ALC12016 Name:VISEN INDUS¶ 田ES No/Date:15/87‐ 1/2016 l aι 26.04.2017 No/Date:0310803251 11.03.2016 Name:VISEN INDUS■田ES INo/Date:15/87‐ 1/2016 18し26.04。2017 10803331 15。03。2016 rn : The Committee considered the case * p"i"g ) Technical descriptions/spocifications, percentage composition @y weight) ofthe products to be exported. ) Detailed manufacturing pnocess along with technicaliustification for wasages claimed at each stage and each of chemical name, Technical specifications of items proposed to be imported. Whettrer the scrap generated in the process is being reused or not. If not the technical justification for its non-use nay be mishedolfthe scrap is being sdt h sde value/cOmmercial value may be indicated. )Mm balancc indicating calculative statement Ofthe requirement Ofeach Ofitem for manufame ofeach of File:01/87/050/00137/AM17ノ product. ６ ― ― ― ― ― ― ― ― ― ― ― ― ― っ Ｆ Ｉ Ｉ RLA File:03/95/040/00899/AM15/

^ 聘幅 4/8/87ALα 2“6ド柵α Ⅵ S田ツ∬ us膿辮雪II 町 ず則舒 /050/Om“ハⅢ7ヒ 1笠爛 T畑∽ T7響 lγ圏TTT03571 1 3おlo■: The Conlmittee considered the case and decided to approve On repeat bast(Adh∝ Norlns)based On decision ofthe NC Mecting No.4/87‐ ALC1/2012 held on 27.04.2012 and recommended as under: EXPORT ITEM QTY IMPORT ITEM QTY Polyvinyl Acctate Emulsion SoHd Content 56%+/‐ 1% l kg 1.Hydroxy Ethyl Celhlose 0.0073 kg 2. Vinyl Acetate Monomer 0.4440 kg 3. Veova 10 0.0188 kg 4.Acrylamide 0.0027 kg 5.Norlnal Butanol 0。0470 kg 6. Maleic Anhydride 0.0300 kg 7.High Dens,POlyethylene (B10Wing Grade) As per packing policy No.:35/8787‐ ALC1/2016 Name:VISEN INDUSTRIES No/Date:15/87‐ 1/2016 18し26.04。2017 File:01/87/050ノ00147/AM17/ Πb Ю3″5/040/00976/AM16た p8.03.2016 cision: The Committee considered the case anO O".iA"a to "pp*re on repeat uasis le6oc NffiUGA decision of the NC Meeting No. I l/87-ALClDOl2held on 2O.O6.2Ol2and recommended as under: No.:107ノ15/87‐ALC12016 : The Committee considered the case anA aeciOea to refeitobE No/Date:15/87‐ 1/2016 laし26.04.2017 ΠL 34/24/040/00302/AMl″ || 15。04。2016 Butyl Acrylate and Methacrylic Acid Copolymer EmulsiOn (Solid Contents 50%+‐2%) 3.HiまDensity POlyethylene RA may take consequential action 8s per pollcy / procedures. Name:KLIPOLYMERS 2~引Mcet No/Date:15/87‐ 1/2016 ldじ26.04。2017 File:01/87/050/00500/AM17/ File Ю5/23/040/00563/AM16ノ:ILicoN No.:60/8/t7-ALCtnOrc lfartyNameVlUONPRODuCTS File:01/87/050/00172/AM17/ : The Committee considered the case as and declded issue 10ttr tO the au6orisatiOn RA may take consequential ection ss per policy / procedures. LTD Diiectl;ate Ge,teral o. Forei3n -irade lJlinistry of Commerce & lnriustry Government of lndia Udyog Bhawan, New Delhi-110011

ハ Technical descriptions/specifications, percentage composition @y weight) of the products to be exported. Detailed manufacttfing prooess along with technical justification for wastages claimed at each stage and each of the required in the manufactruing prooess. r) chemical n4me, Technical specifications of items proposed to be imported. be furnished. If the scrap is being sold the sale value,/commercial value may be indicarcd. ) Material balance indicating calculative statement ofthe requirement of each of item for manufactqre of each of prOduct. No.:61/8/87‐ ALClr2016 Name:VIS10N PRODUCTS No/Date:15/87‐ 1ノワ016 LD l ac 26.04。2017 ,No/Date:3410042072 15.04.2016 Decision : The Committee considered the case as pe. agenda holder for submission of the following information. Technical descriptionVspecifications, percentag€ composition @y weight) of the products to be exported. Detailed manufacturing pr$ess along with technical justification for wastages claimed at each stage and each of the No.:628/87‐ALCl′2016 Name:VISIoN PRODUCTS LTD No/Date:15/87‐ 1/2016 rn : The Committee considered the case ^ po u ) Technical descriptions/specifications, percentage composition (by weight) of the products to be oported. ) Detailed manufactruing process along with technical justification for wastages claimed at each stage and each of the Deferred l d326.04.2017 10042071 15。04.2016 ) chemical name, Technical specifications of items proposed to be imported. ) whether the scrap generated in the process is being reused or not. if not the technical justification for is ッbe m」shed.Ifthe scrap is being solt the sale value/commercid value may be indicated. ManidbdanceindicatingcalculativestatementoftherequrementofeachofitemforrmnufacmeOfeachof product. No.:56/8787‐ ALC172016 Name:SURAT METALLICSi INo/Date:15/87‐ 1/2016 l dι 26.04.2017 File:01/87/050/00168/AM17/ RLA File:52/24/040/00005/AM17/ 5210041865 1.04.2016 and declded issue ctorし,ne「そ m雨Sa::m翼電:脚 ,dyog Bhawan,New Delhl‐ TD. File:01/87/050/00173/AM17/ :The Co呻itteo considered the casO as letr tO the aumOrisatiOn chemical name, Technical specifications of items proposed to be imported. whether the scrap generated in the process is being reused or not. if not the technical justification for its ly be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement of the requirement of each of item for manufacture of each of ΠL Юlκ7/050/0017/AMlデIRLA Rお

Technical descriptionVspecifications, p€rc€ntage composition @y weight) ofthe products to be exAorted. ) Detailed manufacturing prooess along with technical justification for wastages claimed at each strage and each of the Chemical name, Technical specifications of items proposed to be importcd. Whether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-use be firnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of xport product. No/Date:15/87‐ 1/2016 18じ26.04.2017 File:01/87/050/00119/AM17/ File 10206663 1/AM16/ EIslom: The cOmlni"ee cOnsidered the case and decided to approve on repeat basls(亀 dhOC Nom)baSed On decおion ofthe NC Meeting No.5/87‐ ALC12015 held on 06.05。2015 and recOmmended as under: No/Date:15/87‐ 1ノ2016 1』ι26.04.2017 File:03/94/040/00o87/AM17ノ ! ,No/Date:0310804488 .05.2016 Committee.o*iAt No/Date:15/87¨ 1/2016 18ι 26.04.2017 Flle .No/Date:3110066140 :31/83/040/Oooo3/AM17/ 10.05。2016 ion: As per the ruritten "or.en 22.02.2017, the Committee approved following adhoc noms: No.:7/8/87‐ ALC12016 Name:TECHNO

1. Para TertiaFy ButyI PhenOl RA may take consequential action os per folicy I troc-uresl No.:17lllE7-ALCtnLrc HQ File :01 187 /}S}1CfIZSS/ AM|T / Name:K‐FLEX INDIA ATE LIMITED File:01/87/050/00077/AM17/ K‐GUARD FLAME RETARDANT AND SMOKE SUPPRESSANT COMPOUND o膨PoRT GROSS COⅣΠぶr IS 97.417%)。 Ths cOmpound meetsthe働 " standards like ASlM E 84 and smoke rating 25150 210600 kg Unvulcanised Rubber Master Batch X loo 205160 kg RA lnay take consequential action as per POHcy′ P取Odures. rA

No.:132′15/87…ALC12016 Party Name:PLASTENE YFILMS LTD. Mcet No/Date:15/87‐ ALC1/2016 18じ26.04.2017 IHQFileЮ ν87Ю50/00525ハM17/ Fllo:37/24/040/00001/AM17/ Lic,No/Date:3710002644 ,05。2016 Decision: The Committee considered the case as per agenda and decided to call for the sample of the export import product from the authorisation holder. No.:19715/87‐ALC12016 Name:MACRO POLYMERSI INo/Date:15/87‐ 1/2016 .LD。 18じ26.04.2017 : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptionVspecifications, percentage composition @y weight) of the products to be erporrcd. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ofthe required in the manufacnring process. ,) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated h the process is being reused or not.Ifnot the technical justiication for its be ftrnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative stat€mcnt of the requirement of each of item for manufacture of each of product. No.:20/15/87¨ALC1/2016 Name:MACRO No/Date:15/87¨ ,YMERS P.LTD. /2016 18126.04.2017 File:01/87/050/00413/AM17/ File 10138031 1劇M16/ .05。2016 ln : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the be furnished. Ifthe scrap is being sol( the sale value/commercial value may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.321ノ15/87‐ALC12016 Nalne:MACRO POLYMERSI INorDate:15/87‐ 12016 P.LTD. Deferred 18526.04.2017 ,No/Date:0810138032 。 05。2016 File:01ノ87ノ050/00412/AM17/ File:08/24/040/00414/AM16/ File:01/87/050/00414/AM17/ RLA File:03/24/040/00002/AM17/ : The Commifiee considered the case as per agenda and decided issue deficiency letter to the authorisation Tec.hni.c.el dpsgnptio.ns/_qppcificati_ons, pqrcpntqgp..Co.mpgsitiop Gy_wSieh0 o"f the.p.pd.p!t.s. !o.be.9)rp-o,rt€A 38 Status: Deferred c__z-z. _, l,i-:^r..- -i ^ -.9.Ult tlow Л ll翼野酵鶴 11:]1僣lg

r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of required in the manufacnring prooess. Chemical name, Technical spocifications of items proposed to be imported. Whether the scrap genemt€d in the process is being reused or not. If not the t€chnical justification for its non-use be m血shed.Ifthe scmp is being solt the sde value/comlnercid value may be indicated. Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. No.:22715/87‐ALC1/2016 Name:MACRO POLYMERS No/Date:15/87¨ ヽLD. 16 「:ツlI"1"畑1lmγ ・ File:08/24/040/00007/AM17/11LicoNo/Date:0810138033 .05。2016 : The Commifiee considered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptionVspecifications, peroentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ) Marcrial balance indicating calculative statement of the requirement of each of itern for manufacture of each of product. No.:24′ 15/87‐ALC12016 Name:MACRO POLYMERS No/Date:15ノ87‐ ヽLD。 ALC1/2016 l aι 26.04.2017 「 Q Π b Юν 87Ю50/00417AM17/1 File:08/24/040/00027/AM17 10138034 .05.2016 rn : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing proc€ss along with rcchnical justification for wastages claimed at each stage and each of the r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being neus€d or not. If not the technical justification for its be mished.Ifthe scmp is being sold,the sale value/conlmercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of ircm for manufacture of each of product. No.:26/15r87‐ALC1/2016 Name:MACRO POLYMERS .LTD. File:01/87/050/00419/AM17/ File:08/24/040/00051/AM17ノ No/Date:0810138036 .05.2016 )n:The Conlmittee considered the case as per agenda and decided issue deflciency letter to the authorisation for submission ofthe following infomation。 l dι 26.04.2017 Technical ofthe 1彎 ylqvtvr vjilgrdt ulErulu,r r t_ Directci'ate Ge,reral o. Foreinrr Tracle llinistry of Ccmmerce & ln?ustry UdyOg Bhawan,New De!hi‐ 110011

Detailed manufachring process along with technical justification for wastages claimed U eacn stage and each of the required in the manufacturing prlocess. be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requirement of each of ircm for manufacture of each of port product. No.:27′ 15/87‐ALC12016 Name:MACRO No/Date:15/87‐ 1/2016 ,YMERSP.LTD。 18じ26.04.2017 icoNo/Date:0810138037 .05.2016 : The Commitrce considered the case as per agenda and decided issue deficiency letter to the ) Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be oported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the: ) Chemical name, Technical specifications of items proposed to be inportcd. Whether the scrap generate.d in the process is being reused or not. If not the technical justification for its non-use be ftrnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statcment of the requirement of each of item for manufacture of each of product. ICaseNo.:28/15/87‐ ALClr2016 File :0 l/87/0 50/0042r I A\ll 7/' IRLA Fite :}B1Z4!}4O1OOOS3 I AMIT t 10138038 105。2016 : The Committee considered the case as per agenda and decided issue deficiency letter to the ) Technical desoiptionVspecifications, percentage composition @y weight) of the products to be oported. r) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the Whether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-use be furnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicarcd. Marcrial balance indicating calculative stat€ment ofthe requirement of each of item for manufacture of each of prOduct. No.:29ノ15/87‐ALC172016 No/Date:15/87‐ 16 1晨多26。04.2017 File:01/87/050/00422/AM17/ 1 File:08/24/040/00068/AM17. 10138039 105。2016 Decislon : The Committee considered the case as per agenda and decided issue deficiency leter to the , ri ,i,uvtvt vJltgldr vt i 1r ;;are General o. Forei stry of Commerce & lr Government of lndl rg Bhawan, New Delhi P田りName:MACRO POLYMERS P.LTD。 File:01/87/050/00420/AM17/ 46 :Ψ:…ЮⅣ鵬焼蹴I肝

Technical descriptions/specifications, percentage composition (by weight) ofthe products to be oported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of required in the manufacnring process. ) Chemical name, Technical specific*ions of items proposed to be imporrcd. Whether the scrap generated in the process is being reused or not. If not the rcchnical justification for its non-use be furnished. If the scrap is being sold the sale value/commercial value may be indicated. ) Marcrial balance indicating calculative stat€ment ofthe requirement of each of ircm for manufrcture of each of product. No.31″/87‐ALC1/2016 Name:SIIIVA Meet No/Date:15/87¨ ALC1/2016 LD, l a526.04。2017 File:01/87/050/00112/AM17/ RLA File:34/24/040/00033/AM17/ LicoNo/Date:3410042244 106.2016 No.340/9/87… ALClr2016 Name:SHIVA No/Date:15/87‐ 1/2016 l aL26.04。2017 ドTttИ mm畑第↑ m7. epd..dscidprdi-s.-sue,.dcfl p.ien.-cl..lp-tte.r..go.thp ).l●.0.KEυu Addllonal Direclor Ceneral ofFGrei DT"りiab⊆ne隧!OrFQЮ u nisty OfcOmmerce ui言 Government Oflndi /og Bhawan,New Delhト 動 … ■AК ttm6粋 鵬 躙 HL Юν8加 "Ю“"/AM″ IRLARb5能 4ん4M ision:■le Conllnittee considered the case in the meeti ЮHsation(No repeat alloweclu as follow∬ 用・ ,1綱剣態 liκ 7 Ю∞ 7/AM7卜際辮“Ю O“9 hg and decided to approve the ndho Status: Approved ,l norms only for EXPORT ITEM QTY IMPORTITEM QTY REVERSEPRImD BOPP WOVEN BAGS NET CO剛1颯lS¨1)PP GRANULES‐ 1240M「2)BOPP FILM‐ 150 MT 3)TITANIIM DIOXIDE‐ 110 MT4) PACKING MATERIArP GRANULES)‐ 15 MT5)TOIILENE‐ 200.000M 「 1500.000 MT 1.PP GRANULES 1339.2hごT 2.BOPP FILM 165ヽぽr 3.TITANW D10XIDE 115.5Ⅲ 4。PACKING MATERIAL cP GRANULES) As per packing policy 5.TOULENE deleted RA may take consequential action as per Pollcy / Procedures. ln : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacttuing process along with technical justification for wastages claimed at each stage and each of )ChemiCal nalne,Technical specincatiOns ofitems proposed to be imported. be furnished. If the scrap is being sold, the sale value/commercial value may be indicarcd. ) Material balance indicating calculative statement of the rcquirement of each of item for manufacture of each of i The Cpuqg.rjttee.qonsidered the- case as 50 Status: Deferred 障危糀ν叩1岬爾 1認T34∞″ 25

Technical descriptiondspecifications, percentage composition (by weight) of the products to be exaorted. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the be ftrnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacturp of each of product. No.:23/15/87…ALC1/2016 Name:MACRO POLYMERSI INo/Date:15/87‐ 12016 。LTD。 l dι 26.04.2017 ,No/Date:0810138110 .06.2016 ln : The Committee considered the case as per agenda and decided issue deficiency lettcr to the authorisation Technical descriptionVspecifications, percentage composition @y weight) ofthe products to be exported. ) Deailed manufacturing process along with technical justification for wastages claimed at each stage and each of be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. )Material balance indicating cJculative statement ofthe requirement ofeach ofitem for manun棗田3 ofeach Of product. No.:25715/87‐ALC1/2016 Name:MACRO No/Date:15/87‐ 12016 YMERS P.LTD。 l dE26。04。2017 File:01/87/050/00418/AM17ノ 10138111 AM17ノ 106.2016 The Committee considered the case and decided to approve on repcat baris (Adhoc Norms) based decLion ofthe NC Meeting No。 9/87‐ ALC1/2015 held on 04.06.2015 and recommended as under: No.:30r15/87‐ALC12016 Name:MACRO POLYMERS INo/Date:15/87‐ 12016 tLTD. 』し26.04。2017 ,No/Date:0810138112 .06.2016 : The Commitee considered the case as per agenda and decided issue deficiency te'ter to ttre auttrorisation , gio Gc,reral o. Foreig ;try of Commerce & lnt Government of lndii g Bhawan, New Delhi- File:01/87/050/00416/AM17/ File:08/24/040/00008/AM17/ EXPORT「EM QTY IMPORTITEM QTY Urea Formaldehyde Resin UF-8 l kg

1. Butanol 0.598 kg
2. Urea 0。270 kg
3. Toluene 0.033 kg RA may take consequential action as pcr Policy / procedures. File:01ノ87/050/00423/AM17ノ RLA File:03/24/040/m80/AM17/1 for submission of the information.

Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of ) Chemical name, Technical specifications of ircms proposed to be imported. be furnished. tf the scrap is being sold the sale value/commercial value may be indicated. r) Material balance indicating calculative statement ofthe requirement of each of ircm for manufactue of each of product. No.:31′ 15/87¨ALC12016 Name:MACRO POLYMERS No/Date:15/87‐ ヽLD。 ALC1/2016 18126.04.2017 File:08/24/040/00081/AM17ノ |ILic.No/Date:0810138122 .06.2016 : The Commitrce considered the case as per agenda and decided issue deficiency letter to the Technical descriptions/specifications, percentage composition @y weight) ofthe products to be exported. ) Deailed manufacturing process along with technical justification for wastages claimed at each stage and each ofthe, be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. No.:32ノ15/87‐ALC12016 Name:MACRO POLYMERS Mcet No/Date:15/87‐ 、LD. /2016 l dι 26.04.2017 File:01/87/050/00425/AM17/ File:08/24/040/00090/AMl Lic.No/Date:0810138H3 .06。2016 rn : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation, Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each sAge and each of the, r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-usel be firnished. If the scrap is being sol{ the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of ircm for manufacture of each of product. No.:33/15/87‐ALC1/2016 Name:MACRO POLYMERS Meet No/Date:15/87¨ ヽLD。 l a326.04.2017 「 Q Fme Юν 87ん50ん0424/AMF/ 「QⅢ∝ O1/87/“∽“ %ハm7障AⅢ∝“ /24/0401∞%ハmγttT憫ツ 7∵ 「 動 ¨ 　 一 RLA

Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be e:rported. ) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the r) Chemical name, Technical specifications of items proposed to be imported. be furnished. If the scrap is being sold the sale value/commercial value may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:4479/87… ALC1/2016 Name:SHⅣA No/Date:15/87‐ LD, /2016 8じ26.04。2017 rn : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptionVspecifications, percentage composition @y weight) of the products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statement of the requirement of each of ircm for manufacture of each of product. No.:14/10/87‐ALC172016 Name:KRISHNA No/Date:15/87‐ 1/2016 PVT.LTD. 18126.04.2017 ,No/Date:0310805544 16.06.2016 : A copy of application has been fonrarded to DC (MSME). Comments still waired. No/Date:15/87‐ 1/2016 18126.04.2017 ,No/Date:0810138195 16 Technical desoiptions/specifications, perc€ntage composition (by weight) of the products to be exported. Deailed manufacturing process along with technical justification for wastages claimcd at each stage and each of the be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative stat€ment of the requirement of each of item for manufacture of each of :te Ge,neral o. t y of Commerce ;overnment of Bhawan. New I File:01/87/050/00219/AM17/ File 3424/040/00062/AM17/:した.No/Date3410042261 File:01/87/050/00236/AM17/ File:03/94/040/00222/AM17ノ Name:MACRO POLYMERSi 「 QⅢ翻 И 知 "畑 ″ 7ハⅢ7世 AⅢ卸 鋭仙4的∞ "ハ m7 product.

File Ю1/87/050/00472/AM17/11RLA File:04/24/040/00054′ AM17/11Li No.879/15/87‐ALC1/2016 Name:SRF LIMIπ D INo/Date:15/87‐ 1/2016 18ι 26.04.2017 : The authorisation holder has not indicat€d the Specific chemical name of oport producg only brand is given. It is not possible for the committce to fix norms without chemical namos. Therefore, committce to reject the case. No.:80ノ15/87‐ALC12016 Name:SRF LIMITED No/Date:15/87‐ 1/2016 18ι 26.04.2017 File:01/87/050/00473/AM17/1RLA Fllo :04/24/040/00055/AM17/ : The authorisation holder has not indicated the Specific chemical name of export produc! only is given. It is not possible for the committee to fix norms without chemical names. Therefore, to reject the case. No.3133715/87‐ ALC1/2016 Name:PLASTENE INDIA No/Date:15/87‐ 1/2016 l aι 26.04.2017 File:01/87/050/00526/AM17/11RLA File:37/24/040/00003/AM17ノ |ILicoNo/Date:3710002649 119.07.2016 The Committee considered the case in the meeting and decided to approve the rdhoc normr as follows: No/Date:15/87‐ 1/2016 18126.04.2017 The Committee considered the case in the meeting and decided to call for GSM of export item and I and 3. Applicant also should submit GSM of adhesive. 隕 EXPORT ITEM QTY IMPORTITEM QTY PP Woven Sacks without Liner (Net content ofPP Woven FabHcs¨ 780 MT 2)PP Granules(for the manufacturlng ofPP yarn for stitching‐ 50 MT(3)PP Granules(for the manufacming Ofnarow weaving fabHcs for Tape)‐ 170剛 1000.000 MT l. Polypropylene Woven Fabrics 795。600 Rrr 2. PP Granules ( for the manufacturing of PP Yarn for stitching) 52.500ヽ″ 「 3. PP Granules (for the manufacturing of Narrow weaving fabrics for Tape) 178.500ヽごT RA may take consequential action ar pcr Policy / Proccdures. 陣

…H隅燃I脇 田戸 暉7 囲Tが1ザイ| ecided to approve on repent basis(Adhoc Norllls)based On )ld on 08。11.2012 and reconunended as under: EXPORT ITEM QTY IMPORT ITEM QTY Polyester compound containing minimum 93.5o/o Polyester Chips/PET Resin. l kg Polyester chips / PET Resin 0.945 kg RA may take consequential action as per Policy / Procedures. No.:14/15/87‐ALC1/2016 Name:VIKAS ECO‐ CH No/Date:15/87- 1/2016 l a526。04.2017 : The Committee considered the case as per agenda. Committee decided to defer the case to examine ofthe authoHsation holder. No.:7ノ13/87‐ALC1/2016 Name:SIDDHI DECOR No/Date:15/87‐ 1/2016 18じ26.04.2017 : The Commiuee considered the case and decided to refer to DIPP. f @trt," I I ITNDUSTRTES (rNDrA) LrMrrED, liilfrr.#,r, lAnnroved l @ I I - I lqonnrorr I I lDecision: The Committee considered the case and decided to approve on repeat basis (Adhoc Norms) based on I ltne decision of the NC Meeting No. l3l87-ALcll20l6 held on 28.12.2016 and recommended as under: 1"" I EXPORT ITEM QTY IMPORTITEM QTY XLPE Compound containing 750,000 MT 1.LLDPE Granules 749。550 MT minimum 98%LLDPE 2. Di-Cumylperoxide (DCP) 0.600ヽごr 3. Antioxidant 0.600 MT 4. Ocagon Jumbo Sleeves-Box As per packing policy RA may take consequential action es pcr Pollcy / Prccedures. File:01/87/050/00407/AM17/ S.B.S. REI]DY ・:二 i、 タ よ 11翼∬ 111,:]1店1風

「 Qm∝O1/87鰤∽剛 晨m7墜 芸 ∽ぃ9/AM7 日 TTド ツ | | No.:48/15/87¨ALC1/2016 Name:KKALPANA ISTRIES(INDIA) 〔eet No/Date:15/87‐ こC12016 1 dι 26.04。2017 EXPORT ITEM QTY IMPORT ITEM QTY XLPE Sioplas Compound containing minimum 98% LLDPE 750,000 MT 1.LLDPE Cranules 749.550 hrr 2.TH Methoxy VinyI Silane 10.500M 「 3.Di‐ Cllmylpero対de(DCP) 0。600ヽFr 4. Antioxidant 0.600 hfr 5. Gusseted Bag As per packing poliry RA may take consequential action as per Policy / Procedures. Fttel訓 3だれC1/20161鵠 躙 朋 鵬PALI霧 辮 蘇 「 1「 ~1器 ld l邪掲 ,∽""m 障念描的“η.m7 臓辮鵬Ю"%¬ 囲 蹴6盤鰍 Л 器 淵 織鰈 蝋 ず P湘e their le“ rヽ.後6o卿郷 W ttd EXPORTITEM QTY IMPORTITEM Qty PVC SOLD WOVEN FIRE RESISTANT 側 STA■C CONVEYOR BELTING IYPE‐ 8000 0d Weight ofExport Products per Square meter 16.882 Kgs。) 10109.000 Sq Meter 1.Polyster Fllament Y〔m of relevant denier. (1000 Denier/1500 denierp 1.05 kg/kg content contained in the E:cport Product 2.PVC PASTE RESIN 3.856 Kysq.mt.。fExport Product 3.PVC PHOSPHATE PLASTICIZER 2.433 Kg/ sq.mtr. of Export Product 4. Fastener with pins Netto Net 5。NYLON YARN (1260 DENIED叫ON 6HT YARN 1260D Ⅷ TED 1.05 kg/kg content in the E:rport Product Note-l: Party shall declare spccilic denier in chlpplng bllls end Bills of entry and both shall be correlated at the tlme of EODC. RA may take consequentlal action ss per Policy / Procedures. No.349/15/87‐ALC12016 Name:KKALPANA No/Date:15/87‐ 1ノ2016 INDUSTRIES(INDIA) l dζ 26.04.2017 File:01ノ87ノ050/00442/AM17/ File No/Date:0310807538 :03/94/040/00461/AM17/ 1.09。2016 : The Committee considered the case as per agenda. Committee decided to defer the case to examine 蠍聯 ofthe authoHsation holder. l記73躙鰐

「FTTTα tt6岬菅りⅢ樫燃声 | rTず lT50ん 0143/Am7 1LARbЮ ν94Ю40Ю “ 65/AM7 LicoNo/Date:0310807540 01.09.2016 [ :ision: The Committee considered the case and decided to spproyG on repeat basis (Adhoc Norms) based on decision of the NC Meeting No. 13187-ALC)2016 held on28.12.2016 and recommended as under: EXPORT ITEM QTY IMPORTITEM QTY )GPE Compound containing minimum 9&%LLDPE 750.000 MT 1.LLDPE Granules 749.550ヽごr 2.Di… CumylperoxideのCP) 0。600 MT 3. Antioxidant 0.600 MT 4. Octagon Jumbo Sleeves-Box As per packing policy RA may take consequential action ss per Policy / Procedures. File:01/87/050/00445/AM17/ File:03/94/040/00489/AM17ノ No.:52ノ15/87…ALC1/2016 Name:DOW CHEMICAL No/Date:15/87‐ 1/2016 T10NAL PRIVA霊 18ι 26.04.2017 ,No/Date:0310807548 1.09。2016 Technical descriptions/specifications, percentage composition @y weight) of the products to be exported. )Detailed manufacming process along with technicaljustilbation for wastages claimed at each stage and each ofthe Chemical narne, Technical specifications of items proposed to be imported. be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:53715/87‐ALC1/2016 Name:DOW CHEMICAL i No/Date:15/87‐ 1/2016 ■ONALPWA‐ 1 18ι 26.04.2017 File:01/87/050/00446/AM17/ File:03/94/040/00490/AM17/: 10807549 )n3¶h COnlmittee considered the case as per agenda and decnded issue deflciency letr to the for submission ofthe following infomation. Technical descriptions/specifications, percentage composition (by weight) of the products to be oqorted. r) Detailed manufactrning process along with technical justification for wastages claimed at each stage and each of be furnished. If the scrap is being sold the sale value/commercial value may be indicated. ) Material balance indicating calculative stat€ment of the requirement of each of item for manufacture of each of S kLDDY G9neral of Fcre191 leral oI Foreign l r二:17品牌ッ product 72 dyog Bhawan, New

HQ File:01/87/050/∞447/AM17/ No.:54/15/87…ALC12016 1 No/Date:15/87‐ 16 18L26.04.2017 Decision : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisationl ) Technical descriptions/specifications, percentage composition @y weight) of the products to be orported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of required in the manufacturing proc€ss. ) Chemical name, Technical specifications of items proposed to be imporrcd. Whether the scrap generated in the process is being reused or not If not the technical justification for its be furnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. )Material balance indicating calculative statement ofthe requirement ofeach ofitem for manufame Ofeach of product. No.:36/15/87‐ALC12016 Name:MACRO POLYMERS No/Date:15/87‐ 1/2016 l aζ 26.04。2017 .LD。 「 QΠ :lν 87“ OЮ 11::ハ m7障 A RL Ю824Ю40Ю囲9/AM7 ,No/Date:0810138601 16 for submission of the following infonnation. Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the r) Chemical name, Technical specifications of items proposed to be imported. be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicated. Matcrial balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:51/15/87‐ALC1/2016 laじ26.04.2017 ,No/Date:0310807568 、2016 Technicd descriptions/specincations,percentage composition●y weight3 0fthe products to be exported. Detailedmanufacmingprocess alongwithtechnicaljustiication forwastages claimed ateach stage andeach ofthe required in the manufacnring process. ) Chemical name, Technical specifications of ircms proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the rcchnical justification for its non-use be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. P釘りName:Cm¶ⅣE SIVLO PACKS PVT LTD INo/Date:15/87¨ lr2016 Flle:01/87/050/00444/AM17/ Fllo:03/94/040/00485/AM17/ What is the word'Shouldef in description of import item No-4 stands for? 点i網継:害賜 r,ilr,*rnment Ot naitaV ' . .,.; :,,lrarryan, New Delhi-.] 1,.r,

File:01/87/050/00449/AM17/ File:03/94/040/00501/AM17″ ILicoNo/Date No.:56715r87‐ALC172016 Nnmα DOW CHEMICAL :IMcetNo/Date:15/87‐ .T10NAL PRIVATE IIALC1/2016 :121&26.04.2017 :0310807576 Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of Whether the scrap generated in the pЮ cess is being reused or not.If not the technおal justiacatiOll fOr its be fumished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Marcrial balance indicating calculative statement ofthe requirement of each of item for manufacture of each of pЮduct. No.:57/15r87‐ALC1/2016 Name:DOW CHEMICAL No/Date:15/87‐ 1ノワ016 、TIONAL PRIVATE File:01/87/050/00450/AM17/ D :21■巨:%2917_ File:03/94/040/00503/AM17ノ :ILicoNo/Date:0310807577 1照19912911 : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. r) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. Name:MACRO POLYMERS No/Date:15/87‐ 1/2016 ヽLD. 18ι 26.04。2017 File:03/24/040/00230/AM17′ No/Date:0810138616 「い剛"Tm略 0晨m71 16 for submission ofthe follo― g mfomation. Technical descriptionVspecifications, percentage composition (by weight) of the products to be oported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of r) Chemical name, Technical specifications of items proposed to be imported. be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicarcd. ) Material balance indicating calculative starcment of the requirement of each of item for manufacture of each of product. No.337r15/87‐ALC1/2016 邪r毀麗甲β露ゃ場 θ yoE Bhawan, t'lewOeiiijrnr

No.:58/15/87‐ALC1/2016 1 Name:JAIN IRRIGATION No/Date:15/87- /2016 dι 26.04.2017 File:01/87/050/00451/AM17ノ File:03/94/040/00505/AM17ノ No/Date:0310807622 16 : The Committee considered the case and decided to refer to DIPP. No.:59ノ15/87‐ALC172016 Name:DOW CHEMICAL No/Date:15/87‐ 1/2016 ATIONAL PRIVA電 l a526.04。2017 ,No/Date:0310807615 16 ) Technical descriptionVspecifications, percentage composition @y weight) of the products to be exported. r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each materials required in the manufacturing process. ) Chemical name, Technical specifications of ircms proposed to be imported. Whether d"scrap genented in the process is being reused or not.Ifnot the technicaljustittation for its non‐ use be ftrnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for manuftcture of each of product。 No/Date:15ノ87‐ 1ノワ016 l a1 26.04.2017 File:01/87/050/00396/AM17/ File 10206972 113/AM17/ .09.2016 As per the nritten comments furnished by the DIPP宙de their letr No。 7/171/2017rrS. 24.04.2017, the Commitrce approved following adhoc norms: LTD。 No.:3715r87‐ ALC1/2016 Name:丁EGA INDUSTTIES EXPORT ITEM QTY IMPORTITEM Quantity Recommended per MT of erport product Rubber Liner for Grinding Mills for [Yfining Industries (containing minimum Synthetic Rubber PBR 90 MT, Natural Rubber 90 MT, Hot Rolled Steel Plate - Gr Hardox 500/JFE-EH500A- l 33.5 MT) 500.000 剛 1.Synthetic Rubber PBR (any grade) 0.182 MT 2. Natural Rubber(any grade) 0.182ヽrr 3. HotRolled Steel Plate- Gr Hardox 500/JFE- EH500A - (of rclevant grade and thickness) 0.267 MT Note: grade and thickness of lnput item-3 shall tally ln both crport and import" RA may take consequential actlon as pcr Policy / Procedures. File:01/87ノ050ノ00452/AM17/ File Status: Approvcd

No.:1ノ15/87¨ALC172016 Name:WEILBIIRGER TINGS(卜DIAD PRIVA霊 No/Date:15/87‐ 1ノ2016 18ι 26.04。2017 File:01/87/050/00394/AM17ノ File:02/24/040/00082/AMl Technical descriptions/specifications, percentago composition @y weight) of the products to be ogorted. ,) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of ;) Chemical name, Technical specifications of items proposed to be imporrcd. Whether the scrap generated in the process is being reused or not. If not the rcchnical justification for its be furnished. If the scrap is being sold, the sale value/commercial value may be indicarcd. )Mate五J bdance indicating calculative statement ofthe requrement ofeach ofitem for manufacme ofeach Of product. No.32ノ15/87‐ALC1/2016 Name:HIGHPOINT INo/Date:15/87‐ 1/2016 18じ26.04.2017 ,No/Date:0210206974 16 rn : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptionVspecifications, percentage composition @y weight) of the products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of Whether the scrap generated in the process is being rcused or not. If not the technical justification for its be ftrnished. If the scrap is being sold the sale value/commercial value may be indicatpd. ) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. File:01/87ノ050/00404/AM17ノ File:05/24/040/00147/AM17 : The Committpe considered the case as per agenda and decided issue deficiency letter to the for submission ofthe followng mfomation. Technical descriptions/specifications, percentage composition (by weight) of the products to be orported. ) Detailed manufacturing process along with technical justification for wastages claimed at each sage and each ofthe r) Chemical narne, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. [f not the technical justification for its be furnished. If the scrap is being sold the sale value/commercial value may be indicated. r) Mat€rial balance indicating calculative stat€ment of the requirement of each of item for manufacture of each of product. File:01/87/050/00395/AM17ノ File:02/24/040/00110/AM17/ No.:11′ 15ノ87‐ALC172016 Export quantity in kg term. l"▲▼ ・・・ “ V : The Committee considered the case as per agenda and decided issue deficiency letter to the for submission of the following infonnation. ′ Udva″ 口、^If ri'iY::lυ ::Rα ia Uウog Bha硝∴ iヽ∬Ь器場10"1

HQ Fllo:01/87/050/00405/AM17/ No.812/15/87‐ALC1/2016 Name:RELIANT No/Date:15/87‐ 1/2016 ACKAGING FILMS LIMITED laじ26.04.2017 File:05/24/040/00148/AMl 10399709 15.09.2016 : The Committee considered the case as per agenda and decided issue deficiency leter to the ) Technical descriptions/specifications, p€rcentage composition (by weight) ofthe products to be exporrcd. r) Detailed manufacturing process along with rcchnical justification for wastages claimed at each sage and each of ) Chemical name, Technical specifications of ircms proposed to be imported. Whether the scrap generated in the process is being reused or not. Ifnot the technicaljustification for its non-user be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of ircm for manufasture of each of product。 No.:61ノ15/87‐ALC1/2016 NameiCREATIVE S吼0 Mcet No/Date:15/87‐ ACKS PVT LTD 1/2016 laじ26.04.2017 File LicoNo/Date:0310807795 15.09。2016 AM17ノ Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the: ) Chemical name, Technical specifications of ircms proposed to be imported. be frrnished. If the scrap is being sol{ the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for manufacnre of each of product。 What is the word "Shouldef in description of import item No-4 stands for? No.:38715/87‐ALC1/2016 Name:MACRO POLYMERS Meet No/Date:15/87‐ ヽLTD. 1/2016 l dι 26.04.2017 File:01/87/050/00431/AM17/ RLA File:08/24/040/00239/AMl 10138684 16.09。2016 : The Committee considered the case alr per agenda and decided issue deficiency letter to the authorisation Technical descriptionyspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of the be furnished. If the scrap is being sold, the sale value/commercial value may be indicated, ) Marcrial balance indicating calculative statement ofthe requirement of each of item for manufacture of each of HQ File:01/87/050/00454/AM17/1 product. / UdyOc Rh,1.′ II.YI:｀υl inala Uウ∝Bttd.商品酬鯖 1品1

No.:106/15/87‐ ALC172016 Name:BULK LIQLJID PVrL" No/Date:15/87‐ 1/2016 18ι 26.04.2017 「 QⅢ ず 鵬7Ю "Ю“"晨 m7卜 AⅢ翻 泡″ “ OЮ∝η/AMlll郡 TЮ ・ m Юtt6 : The Committee considered the case and decided to refer to DIPP. No.:68/15/87‐ALC1/2016 Name:RALLIS INDIA NorDate:15/87‐ 12016 18ι 26.04.2017 File:01/87/050/00461/AM17/ File 10807887 19。09。2016 : The Commitee considered the case as per agenda. Commiuee decided to defer the case to examine the ofthe autho五sation holder. No.315715/87‐ALC172016 Name:RAPID No/Date:15/87‐ 1ノ2016 COoP.LTD. 18ι 26.04.2017 File:01/87/050/00408/AM17/ RLA File Ю5/24/040/00297/AM17/:ILicoNo/DateЮ 510399797 121.09.2016 F眈 4/15/87oA圏川 “ 1珈 祠 lL鵬 蹴 I肝 ‐ 1器島児型Ю""ハm7 膨 鵬∽∝r/AM″ 1躙 辮 Ю2102"∝3 Approved rn: The Committee considered the case in meeting and taking cue from SION decided to approve the with 5% w.Btage as follows: EXPORT ITEM QTY IMPORT ITEM QTY Polyethylene Bags T Shirt bagY garbage bags 1250.000ヽFr PE Cranules HDPE/ LLDPVLDPE pnules 1312.5 MT Note: The Authorisation holder shall declare the neme rnd qurntity of relcvant polymer vta, HDPE/LDPE/LLDPE and allowed to lmport came polymer of relevant qurntlty with 5% wastage only. RA may take consequential action as per Policy / Prccedures. ln : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptionVspecifications, percentage composition (by weigbt) ofthe produc-f to be oported. r) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of ) Chemical name, Technical specifications of items proposed to be imported' Whether the scrap generated in the process is being reused or not. If not the technical justification for its non'user be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative stat€ment of the requirement of each of item for manufacture of each of product. _ 90 陣 ― ― ― ― ， ， ， ， ， ― ― ― 一

File:01/87/050/00448/AM17/ File :03/94/M0/00498/AM I ?/: lLic.No/Date:03 I 08079t No.:55715/87‐ALC1/2016 Name:EXPANDED No/Date:15/87‐ 駆 R SYS¶ ElⅥS PVT.LTD 1/2016 18ι 26.04.2017 22.09.20t6 ) Technical descriptionVspecifications, percentage composition @y weight) of the products to be orporled. ) Detailed manufacturing process along with rcchnical justification for wastages claimed at each stage and each of the Whether the scrap generated in the process is being reused or not If not the technical justification for its non-use be furnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicatcd. r) Material balance indicating calculative statement of the requirement of each of ircm for manufacture of each of product. The Committee considered the case and decided to spprove on repcat basil (Adhoc Norms) based on decision of the NC Meeting No. 13187-ALClD0l6 held on2E.l2.20l6 and recommended as tmder: No.:16715/87‐ALC1/2016 Name:SPERRY PLAST No/Date:15/87‐ 1/2016 laじ26.04.2017 ,No/Date:0510399890 .09.2016 : The Commitrce considered the case and decided to refer to DIPP. Name:SPERRY PLAST No/Date:15ノ87‐ 1/2016 18ι 26.04.2017 にase No.:63′ 15/87…ALC12016 (INDIAJ LIMITED,lALC12016 18ι 26.04.2017 IHQ File:01/87/050/00456/AM17/ File:03/94/040/00541/AM17ノ 11LicoNo/Date:0310807967 EXPORT ITEM QTY IMPORT ITEM QTY XLPE Sioplas Compound contahing mhimum 98% LLDPE ０ ５ ０ ．０ ０ Ｍ Ｔ ７ 1.LLDPE Cranules 749.550 MT 2.T五Methoxy Vhyl Silane 10.500 MT 3. Di-Cumylperoxide (DCP) 0.600ヽごr 4. Antioxidant 0。600ヽrr 5。Gusseted Bag As per packing policy RA may take consequential action ss per Pollcyl!rygedq.s. File:01/87/050/00409/AM17ノ File:05/24/040/00302/AM17ノ No.:17ノ15/87‐ALC1/2016 File Ю178ケ/050/00410/AM17/11RLAFib Ю5/24/040/00303/AMl : The Committee considered ttre case and decided to refer to DIPP. q DEn^/ Name:KKALPANA IIMectNo/Date:15/87‐ 鸞癬i顆

No.:37/13/87‐ALC1/2016 laじ26.04。2017 File:01/87/050/00312/AM17ノ File :03/95/040/00 I 06/AM 1 7/' lLic.No/Date :03 I 0808 I 32 28.09.2016 : A copy of reply received from firm was forwarded to DIPP. NorDate:15/87‐ 1/2016 P錮けName:RELIANCE INDUS■uESLD. No/Date:15ノ87‐ 1/2016 No.:44/15/87‐AL(C1/2016 Name:ESSEN FILMS PVT.LTD。 , 18126.04.2017 File 1ヾo/Date:2410042064 10。2016 1/87/050/00437/AM17/ 7/AM17/ The Committee considered the case in the meeting and decided to approvG the edhoc norms as follows: NorDate:15/87‐ 12016 l a526.04.2017 ,No/Date:0310808235 .10。2016 ffiase all per agenda and decided issue deficiency lett€r to the authorisation ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Deailed manufacturing process along with technical justification for wastages ctaimed at each sAge and each Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-user be ftmished. If the scrap is being sold the sale value/commercial value may be indioated. )MateridbalanceindicatingcalculativestammentOftherequirementofmhofitemformanu回 m ofeach of Approved … 43/15r87‐ALCl側6障 鵬 mSⅣ ・ m。 撰 粥 鮮 「 饉眠 “ 四 T Ъ島児50ん “ 36/AMW 陽角糀 ∽Om6/AM爾

圏 辮 2400420“ | ecision:The Commlittee considered the case in the meeting and decided to approve the ndhoc■ orms as fonows: EXPORT ITEM QTY IMPORT ITEM QTY EVA Placemats cmbOSSed/PlaW Printed/Laminateの 666.667ヽrr EVA Resin 700.000ヽごr RA may take consequential action as per Policy / Prccedures. EXPORT ITEM QTY IMPORT ITEM QTY EVA PIcemat cmbOSSed/Plain/ Printed/Lamhateの 666.667ヽぽr EVA Resin 700.000ヽごT RA may take consequential action 8s per Policy / Procedures. File:01ノ87/050/00453/AM17/ product. )7 引htus: DeFerred

No.:39/15/87‐ALC12016 Name:NAVRATAN :No/Date:15ノ87‐ 1/2016 TY CIIEMICALS LLP l dι 26.04.2017 : The Committee considered the case as per agenda. Committee decided to def€r the case to examine the ofthe authoHsation holder. No.:65ノ15/87‐ALC1/2016 Nalne:ARKEMA No/Date:15ノ87‐ 172016 INDIA PVToLTD。, l a526.04。2017 File:01/87/050/00458/AM17/ 10808313 。 10。2016 ) Technical descriptionVspecifications, percentage composition (by weight) of the products to b€ ex?orted. r) Detailed manufacnring process along with technical justification for wastages claimed at each stage and each r) Chemical name, Technical specifications of ircms proposed to be imported. Whether the scrap generat€d in the process is being reused or not. If not the rcchnical justification for its non-use be furnished. If the scrap is being sol( the sale value/commercial value may be indicated. Marcrial balance indicating calculative statement of the requirement of each of ircm for manufacture of each of product. Mcet No/Date:15/87¨ ALC1/2016 212L26.04.2017 File:01/87/050/00438/AM17/ RLA File No/Date:3110066357 31/83/040/00091/AM17ノ 。10.2016 :The Conlmittee considered the case and decided to refer to DIPP. No.86/15/87‐ ALC12016 Name:VERSATILE CARD No/Date:15/87‐ PVTLD 16 18ι 26.04。2017 File 「…咄畑∽ ""ハⅥ 7 H9/AM17/ LicoNo/Date:0410162370 13.10。2016 Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufactuing process along with technical justification for wastages claimed at each stage and each materials required in the manufactuing process. ) Chemical narne, Technical specifications of items proposed to be imported. be firmished. Ifthe soap is being sol4 the sale value/commercial value may be indicated. Matcrial balance indicating calculative statement of the requirement of each of item for manufacture of each of product. File 104 LicoNo/Date:0810138819 Export quantrty in kg term. 3.B.S.REDいY Addit:onai Director Ggneral oi Directorate General o. r',;inistry oi Ccmmerce &' Udyog Bhawan,New Delhi‐ 110011

,YMER SYS¶EMS PVT,LTD No/Date:15/87‐ 1ノ9016 l dι 26.04.2017 : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptionVspecifications, percentage composition @y weight) ofthe products to be exported. : Detailed manufacturing process along with technical justification for wastages claimed at each stage and each of materials required in the manufacnring prccess. be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. r) Material balance indicating calculative stalement ofthe requirement of each of item for manufactre of each of product. Mcet No/Date:15/87‐ ALC1/2016 212L26.04.2017 for submission ofthe following inforrration. Technical descriptions/specifications, percentage composition (by weight) ofthe products to be e)eorted. Detailed manufacnring process along with technical justification for wastages claimed at each stage and each be furnished. Ifthe scrap is being sold, the sale value/comm€rcial value may be indicarcd. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. No/Date:15ノ87‐ 1/2016 18じ26.04.2017 RLA File :05/23/040/00319/AM17ノ Lic.No/Date:0510400171 10.2016 Declsion:The Commlttee consldered dle case and declded to defer the case. No.:9/15/87‐ ALC12016 PargName:KLJ POLYMERS No/Date:15/87‐ 1ノ2016 CHEMICALS LTD Deferred l a326.04.2017 File:01/87/050/00402/AM17/ RLA File :05/23/040/00320/AM17/ ,No/Date:0510400172 10。2016 Parly Name:KIJ POLYMERS HQ File:01/87/050/00401/AM17/ : The Commitrce considercd the case and decided to refer to DIPP. ユυ,

Case No.:64/15/87¨ALC12016

Status: Dererred 1:Ⅲ∝鋭ん 7Ю51Ю0417ハm7鵬ぉお叩 9,・疇w7 |す暇ぉЮ 31011Tl:

Case No.:10/15/87‐ ALC1/2016

PaゥName:Ao M.POLYPLAST PRIVATE LIMIπD Itatus: Deferred HQ Flle:01/87/050/00403/AM17/ lLA File 05/23/040/00341/AM17ノ しicoNo/Date:0510400137 18.10。2016 107.

Case No.:3/15/87‐ALC1/2016

No.:69/15/87‐ALC1/2016 18126.04.2017 I 09 IHQ File :0 l/87/0 501004621 AMIT I File LicoNo/Date:0310808617 77/AM17/ 1.10.2016 : The Committee considered the case as per age,nda. Committee decided to defer the case to examine the of the authorisation holder. No.:97ノ15787‐ALC172016 1 Name:LOPAREX lNDIA 7ATE LIMITED Name:GAJJRAJ AGENCY ATE LIMID Name:WELBIJRGER TINGS cNDVりPRIVATE Name:DURA LINE INDIA LD No/Date:15/87‐ 12016 No/Date:15/87‐ 1/2016 No/Date:15/87‐ 6 No/Date:15/87‐ 12016 a326。04.2017 10400253 for by the 110 No.:5/15/87¨ ALC172016 18じ26.04.2017 File:01/87/050/00398/AM17ノ File Lic.No/Date:0210207099 136/AM17′ 24.10.2016 ne cOmmittee considered the case as per agenda and noted that both export and import items are therefore decided to reiect the case. 18ι 26.04。2017 HQ Flle:01/87/050/00490/AM17/ File No/Date:0210207098 31/AM17/ 10.2016 Decision : The Committee considered the case as per agenda and decided issue deficiency letrcr to the authorisation Technical descriptionVspecifications, percentage composition (by weight) of the products to be exported. ) Detailed manufacnring process along with t€chnical justification for wastages claimed at each stage and each Whether the scrap generated in the process is being reused or not. Ifnot the technical justification for its non-use be fiunished. Ifthe scrap is being sol{ the sale value/commercial value may be indicarcd. ) Material balance indicating calculative statpment of the requirement of each of item for manufacture of each of product. No.37715787‐ ALC12016 RA take consequential action as PPr .10.2016 The committee considered the case in the meeting and approved as appllcd holder in their Advanced Authorization. / Pryg$ye1 File:01/87/050/00400/AM17/ S.3S.REDDY ″ MIlisty Of commerce&1晨 :ustw Gcvernment Ofindia ′ 'dy09 Bhawan,New De!hi‐ 1looll H21 tLA File 05/23/040/00130/AM16/

ハ No.:35/15/87‐ALC1201` File:01/87/050/00428/AM17/ N・me:MACRO POLYMERS IMeetNo/Date:15/87‐ .LTD. IALC1/2016 pl&26.04。2017 )n : The Committee considered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptions/specifications, percentage composition @y weight) ofthe products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each Whether the scrap generated in the process is being reused or not. If not the rcchnicd justification for its be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. Marcrial balance indicating calculative sta0ement of the requirement of each of item for manufacture of each of product. No.:40/15/87‐ALC1/2016 Name:MACRO POLYMERS IMeetNo/Date:15/87¨ .LD。 IALC1/2016 レ1&26.04.2017 File:01/87/050/00433/AM17ノ AM17ノ 10.2016 ) Technical descriptionVspecifications, p€rcentage composition (by weight) ofthe products to be export€d. ) Detailed manufacturing prooess along with technical justification for wastages claimed at each stage aod each Chemical name, Technical specifications of ircms proposed to be imported. Whether the scrap generated in the process is being rcused or not If not the technical justification for its non'use be furnished. Ifthe scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative stat€ment of the requirement of each of itcm for manufacture of each of pЮduct。 No.:42′ 15/87…ALC12016 Name:MACRO POLYMERS No/Date:15/87‐ 1/2016 .LTD. 18526.04.2017 File:01/87/050/00435/AM17ノ Flle ,No/Date:0810138967 10.2016 10/AM17/ :¶にConllnime considered the case as per agenda and decided issue deiciency lett to the audlorisation Technical descriptions/specifications, percentsge composition (by weight) ofthe products to be export€d. DeAiled manufactgring process along with technical justification for wastages claimed at each stage and each materials required in the manufacnring process. Whether the scrap generatcd in the process is being reused or not. If not the te.hnicd jttstification for its be fisnished. If the scrap is being sold, the sale value/commercial value may be indicated. Material balance indicating calculative statpment of the requirement of each of item for manufacture of eash of File H5 にお.No/DateЮ 810138965 pЮduct. Status: Deferred | 14 Status: Deferred Governmen1 0f!ndia
‐ ldyOg Bhawan,New Deihi‐ 11001

HQ File :0 li87l050/00 459 I AMLT I 118 IMeet No/Date:15/87‐ IALC1/2016 pl&26.04。2017 Lic.No/Date:0310808723 1/AM17/ 。10.2016 : fte Committ€e considered the case alt per agenda and decided issue deficiency letter to the for submission ofthe follo― g infomation. Technical descriptionVspecifications, peroentage composition (by weight) of the products to be exaorted. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ) chemical name, Technical specifications of items proposed to be imported. D Whether the scrap generated in the process is being reused or not. If not the rcchnical justification for its be flrnished. If the scrap is being sol4 the sale valudcommercial value may be indicated. Material balancc hdicating calculative statement ofthe requrement ofeach ofitem for manufame ofeach of product. No.:18/15/87‐ALC172016 Name:INJECTOPLAST No7Date:15/87‐ 1/2016 ヽLTD la乙26.04.2017 〕n:The Commiuee considered the case as per agenda and decided issue deiciency letter to the authonsation for submission ofthe followmg mfomation. ) Technical desoiptionVspecifications, percentage composition (by weight) of the products to be oported. ) De6iled .-ot"t*iog process along with technical justification for wastages claimed at each stage and each ,) Chemical name, Technical specifications of items proposed to be imported. ) Whether the scrap generated in the process is being reused or not. If not the technical justification for is ry be fignished. If the scrap is being sol4 the sale value/commercial value may be indicarcd. Matcrial balance indicating calculative statement of the requirement of each of item for manufacturc of each of product. No.:46/15/87‐ALC1/2016 Name:TAC CHEMICALS No/Date:15/87‐ 1ノ2016 PVT LTD, l a526.04.2017 File:01/87/050/00439/AM17/ File LicoNo/Date:5310019235 19/AM17/ 127.10。2016 ) Technical descriptions/specifications, percentsge composition @y weigbt) ofthe products to be exported. i o.a1.a manufacturingpr6ess along with tcchnicsl justification for wastages claimed at each stage and each materials required in the manufacaring process. ) chemical name, Technical specifications of items proposed to be imported. l) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non'use nり騰mishd.Ifthe scrapおbeing soЦ the Sale value/commeК ial value may be indtated. )Material bdance indicating cdculative statement ofthe requmnt Ofeach ofitem for manu伽 曲鵬Ofeach of product. 3mtuS8 Dererred ti.S. 善お累l滝醜ハ | 1 麟i

No。:41/15/87‐ALCl′2016 N口me:MACRO POLYMERS No/Date:15/87‐ 1/2016 LTD。 Deferred 18ι 26.04.2017 HQ File :0 l/87/050/004341 A\tll7 I File 10138993 :08/24/040/00275/AM17/ .10.2016 : The Committee considered the case as per agenda and decided issue deficiency letrcr to the Technical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacnring process along with rcchnical justification for wastages claimed at each stage and each materials required in the manufacnring process. ) Chemical narne, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being rcused or not. If not the technical justification for its non-use be fumished. If the scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative stat€ment ofthe requirement of each of itcm for manufacture of each of product. Nnme:Do R COATSINK& No/Date:15/87‐ PVToLTD. ALC1/2016 18ι 26.04.2017 「 Q Π L Юν "Ю 50Ю04"/AM爾 Lic.No/Date:0310808867 10.2016 ) Technical descriptionVspecifications, percentage composition (by weight) of the products to be oqorted. r) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technicd justification for its non'use be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:67′ 15/87‐ALC12016 Name:GUARNIFLON INo/Date:15/87‐ 1/2016 PVT.LTD. l a526,04。2017 HQ File:01/87ノ050/00460/AM17/ File :03/94/040/00653/AM17/ necislon : f}1 ittee considered the case as per agenda and decided issue deficiency letler to the Technical descriptionVspecifications, percentage composition @y weight) of the products to be oported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ;) Chemical name, Technical specifications of ircms proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical justification for its non'use be fumished. Ifthe scrap is being sol4 the sale value/commcrcial value may be indicated. )MateHd bdance indicating cdculative statement ofthe requrement ofeach ofitem for manum― ofeach Of File ICase No.862ノ15787‐ALC1/2016 product。 ,;,itDlor Ggneral oi; Dt,octcrate Ccnerai o:Forei Min sty of cOmmerce&111 6overnment oflndit む `」yog Bhawan,New Dellli―

No.:98′ 15/87‐ALC1/2016 Nnme:GAJJRAJ AGENCY No/Date:15/87‐ 1ノワ016 'ATE LIMITED l dι 26.04。2017 10207117 .11.2016 The Commifree considered the case as per agenda and noted that both oeort and import items are and therefore Commitrce decided to relect the case. No.:118/15/87‐ ALC172016 Name:SPERRY PLAST No/Date:15/87‐ 1/2016 18じ26.04.2017 File:01/87/050/00511/AM17/ File .No/Date:0510400363 11.2016 : The Committee considered the case as per agenda. Commitee decided to defer the case to examine the ofthe autho五sation holder. Name:SPERRY PLAST No/Date:15/87‐ 1/2016 18こ26.04。2017 File 10400364 :05/24/040/00386/AM17ノ : The Commitrce considered the case as per agenda Commitee decided to defer the case to examine ofthe authorisation holder. No.:99′ 15787‐ALC12016 18じ26.04.2017 No/Date:0210207124 。11.2016 : As per the nritten comments furnished by the DIPP宙de their ld“ r No.7た71/2017/TSW dated 17, the Committee approved following adhoc norms: S.B.S. REDDY irector Ggneral oi I o Ge,neral o. For of Commerce & No/Date:15/87‐ 1/2016 : Approved No.:119/15r87‐ ALClr2016 File:01ノ87/050/00512/AM17/ Nnme:‐GA EXPORT ITEM QTY IMPORTITEM Quantity Recommended per MT of erport product Rubber Liner for Grinding Mills for Mining Industies (containing minimum Spthetic Rubber PBR- 90 MT, Natural Rubber- 90 MT, Hot Rolled Steel Plate - Gr Hardox 500/JFE-EH500A- 133.5 Mr) l MT l. Synthetic Rubber PBR (any gnde) 0.182 hrr 2. Natural Rubber (any grade) 0。182ヽrr 3. Hot Rolled Steel Plate - Gr Hardox 500/JFE- EH500A - (of relevant grade and thickness) 0.267ヽrr Note: Grade and thickncss of lnput ltem-3lhell telly ln both erport end lmport RA may takc consequentiel actlon as per Poltcy / Proccdures. Itotus: Reiected HO Flle:01ノ87ノ050ノ00491/AM17/ 障角馳 OЮm綱/AM爾
‐ 鵠脇50Ю“"/AM″ 1粉糀9Юり"岬″

No.: lfi)/1587 - At-G.l n0l6 : lParty Name:TECHNO No/Date:15/87‐ 1/2016 WAXCHEM PVToLTD., 18ι 26.04.2017 File:01/87/050ノ00493/AM17ノ File ,No/Date:0210207125 153/AM17ノ : The Committee considered the case as per ageirda. Committee decided to defer the case to examine ofthe authoHsation holder. Mect No/Date:15/87‐ IALC1/2016 21&26。04.2017 12? IHQ File :0 l/8?/0 50100521 I AMIT I : The Committee considered the case as per agenda. Committee decided to defer the case to examine the ofthe authorisation holder. Name:ZENI■H No/Date:15/87‐ Approvcd RUBBER 1/2016 PVToLTD l a526.04.2017 File File No/Date:0310809207 1/87/050/00496/AM17/ :03/95/040/00627/AM17/ 。11.2016 As per the writen comments ftunished by the DIPP宙de their letter No。 7/2第017‐TSW 19。04.2017,the Conlmite approved fb■owing adhoc norlns: 12 8 No.:134/15r87‐ ALC172016 10.11.2016 QIY requlred per unit of linished good Oil Resistant NR & NBR based Rubber Compounded Sheets 0.11224 kg 0.01074 kg 0.01171 kg Note: 1. There should be a vrlue crp upto 7o/o oIEtOB value of erports together for lnput ltcms AntioridenU Accelerators/Retsrderg RA may take consequential action s! per Policy / Procedurcs. S.B.S.REDDY Additional Director Gsneral of Directciate General o. No.:103/15/87¨ t4inistry of (

Case No.:81/15ノ87‐ALC1/2016

18126。04。2017 HQ Flle:01/87/050/00474ノAM17ノ AM17/ : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical desoiptions/specifications, percentage composition Oy weight) of the producs to be otported. r) Detailed manufactgring prccess along with technical justification for wastages claimed at each stage and each ) Whether the scrap genented in the process is being reused or not. If not the technical justification for its be fignished. If the scrap is being sold, the sale value/commercial value may be indicated. Materid bdance indicating calculative statement ofthe requirement ofeach ofitem for manumme Ofeach of product. Name:KLJPOLYMERS CHEMICALS LTD No/Date:15/87‐ 1/2016 l aι 26.04,2017 File:01/87/050/00501/AM17/ File 10400492 :05/23/040/00388/AM17ノ P5.11.2016 agenOa. Committee decided to defer the case to examine ofthe authorisation holder. Meet No/Date:15/87‐ IALC1/2016 レ1&26.04.2017 l3 I IHO File :01/87/050/00502/AMl7/ |ハ出417/ 11。2016 per ag€Nda" Committee decided to defer the case to examine ofthe authorisation holder。 No.:110/15/87‐ ALC12016 18ι 26.04.2017 132 File :01/87/0s0/00s03/AMl7/ iIRLA File :卜05/23/040/00390/AM17イ 一 ― ‐― ヽ 一 ―‐ Ⅲ‐ _ _‐ 一‐一‐ .^ ■ . __= ^二 L^ : The Conllntte considered h ctte tt p∝ agenda.Commれe“cided"“fer tt Case m examine me ofthe autho五sation holder。 Nnme:KLJ POLYMERS CHEMICALS LTD Name:SASA RIIBBERS ATE LIMIπD No/Date:15/87‐ 1/2016 No/Date:15/87‐ 12016 No.390/15r87‐ALC12016 18ι 26。04.2017 I 33 IHQ File :01/87/0 50100483 I tNttT I ,No/Date:2410042089 AM17ノ 8 The COmlntte considered h ctte tt per agenda and“ cided"call for tt Lnport hmce copy tom File ICase No.:108r15/87‐ALC1/2016 ICase No.:109ノ15/87‐ALC1/2016 Party Naure:KIJ POLYMERS authorisation holder. ctOrもリ cnener 「ETROCHEMК ALS uⅦπ : 12n Status: Deferred smtus: Dererred しicoNo/Date:0510400494 25。11.2016 1.2016 ‖ I聾滅憮酬魚酬 1

No.:122′15/87‐ALC12016 「 Q RL Юν鍬 “ υ00■5ハm7膨 淵 OЮ “ 07/AM″ 1輩 ∬TЮ Я “ 00Я l l No.:112715787‐ ALC1/2016 「い∵鵬知 5∽“餌ハ m71 Name:KLJPOLYMERS CIIEMICALS LTD No/Date:15/87‐ 1/2016 18じ26.04.2017 No/Date:15/87‐ /2016 10400625 12.2016 : The Committee considered the case as per ogenda and decided issue deficiency lettcr to the Technical descriptions/specifications, percentage composition Oy weight) of the products to be exported. ) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each matcrials required in the manufacturing process. ) Chemical narne, Technical specifications of ircms proposed to be imporrcd. be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of ircm for manufactre of each of product. l dE26.04。2017 : The Committee considered the case as per age,nda. Committee decided to defer the case to examine the of the authorisation holder. Nalne:SWASTIK No/Date:15/87‐ 12016 YMERS 18ι 26.04.2017 : The Committee considered the case as per agenda. Commitrce decided to defer the case to examine the of the authorisation holder. No.31Hノ15/87…ALC1/2016 Name:BLS POLYMERS INo/Date:15/87‐ 172016 1』L26.04。2017 The Committee considered the case in the meeting and decided to approve the edhoc norms as under: File:01ノ87/050/00516/AM17/ EXPORT ITEM QTY IMPORTITEM QTY UV Stabilizer Master Batch (COntaining not more than 20%lrV Stabilizeう 7000.000 kg l. Pollpropylene 5635.000 kg 2. U.Vo Stabilizr 1414.000 kg 3。 Anti oxidant 21.000 kg RA may take consequential action as per Policy / Prccedures. l,4 P田りName:MOTHERSON StIMI SYSttS LIMIII】D Itatus: Deferred ― ― / Directci'ate Ge,reral o. Ministry of Commerce & . Government of lndia Idyog Bhawan, New Delhi-1100i.t

No.:101′15/87‐ALC1/2016 Name:IIAMILTON No/Date:15/87‐ 1/2016 HOUSEWARES PVT.LTD, 18じ26.04.2017 Flle ,No/Date:0310809647 5/AM17/ .12.2016 138 la) Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. D Detailed manufacnring prooess along with technical justification for wastages claimed at each stage and each materials required in the manufacoring process. r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technicd justification for its be flrnished. If the scrap is being sol{ the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. Specification ofitem (l) in terrr ofpercentage ofcolour. No.:120/15787‐ ALC1/2016 Name:VIKAS ECOttCH NorDate:15/87‐ 1ノ2016 18ι 26.04.2017 Fllo:01/87/050/00513/AM17/ File ,No/Date:0510400650 l:0st24lA0/0Bo2lANtt7l 107.12.2016 IMeetNo/Date:15/87‐ ALC1/2016 ,1&26.04.2017 HQ File :0 l/87/050/00 5 14 I AMI-T I Flle Lic.No/Date:0510400651 AM17ノ 107.12.2016 :The Conlmitte considered the case and decided to refer to DIPP。 No.:125/15787‐ ALC1/2016 Name:SWASTIK No/Date:15/87¨ 1/2016 l aι 26.04。2017 10400671 12.2016 No/Date:15ノ87‐ 1′2016 18ι 26.04.2017 10400674 12.2016 ,YMERS File AM17/ : The Committee considered the case and decided to refer to DIPP. No.8126/15/87‐ ALC12016 Name:MOTHERSON SIIMI LIMIttD 142 File:01/87/050/00519/AM17/ : The Committee considered the case and decided to refer to DIPP. File No.:121ノ15/87‐ALC12016 HQ File :0 l/87/050/005181 AMIT I 動 ¨ 　 ・ HQ File:01/87/050/00494/AM17/ Ao 「 li

No.:102′15r87‐ALC12016 Name:HAMILTON Mcet No/Date:15/87‐ HOUSEWARES PVToLTD, ALC1/2016 21 dL 26.04.2017 File:01/87/050/CЮ 495/AM17/ File ,No/Date:0310809856 15。12.2016 )n:The Committee considered the case as per agenda and decided issue deFlciency letter to the aul■ 】dsation for submission ofthe following infomation. ) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported. Detailed manufacturing process along with technical justificuion for wastages claimed at each sAge and each ) Chemical name, Technical specifications of itoms proposed to be imported. be furnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requfurment of each of item for manufacture of each of product. No.:124715787‐ ALC1/2016 1 Name:P10NEER No/Date:15/87‐ YLEATIIERS LTD 16 18ι 26.04。2017 Fllo:01/87/050/00517/AM17/ File No/Date:0510400807 :05/24/040ノ00434/AM17/ 15.12.2016 : ■e Commm〕e cOnsidered the case as per agendao CoHImれe decided to defer the case to exalnme the of the authorisation holder. No/Date:15/87‐ 12016 l aι 26.04。2017 ,No/Date:0510400824 16.12.2016 : The Commitrce considered the case and decided to refer to DIPP. No.3113ノ15/87‐ALC12016 File:01/87/050/00506/AM17/ Ｆ 卜 ‐ ‐ ‐ ４ ６ ‐ 臨 ¨ 5/87‐ALα側← 1靱 吻 ‰ D隅 鵜 I肝 ‐ 1,Tl鵬 715的“ "↑mγ トカ描叩叩l岬7 階おTギツTTO I The Committee considered the case as per egenda and decided to the adhoc noms as follows: Export Item Qty Input item Qty Itinted Packaging Film of other polyesters (23 micron +/- s%l １ ０ ０ Ｍ Ｔ Polyester Ⅱh o3 micron 1/‐ 50/ol 105ヽrr may take consequential action ss pcr Policy / Procedures.

No.382/15787‐ALC1/2016 Name:MACRO POLYMERS No/Date:15/87‐ 1/2016 ヽLTD。 18ι 26.04.2017 : The Commitrce considered the case as per agenda and decided issue deficienry letter to the Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exporrcd. ) Detailed manufactr.ring prooess along with technical justification for wastages claimed at each stage and each Whether the scrap generated in the process is being reused or not. If not the tcchnical justification for its be furnished. tf the scrap is being sold, the sale value/commercial value may be indicarcd. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.384ノ15787‐ALC12016 Name:MACRO POLYMERS No/Date:15/87‐ 1/2016 18ぅ26.04.2017 File:01/87/050/00477/AM17/ File ,No/Date:0810139334 19。12.2016 : The Commitrce considered the case as per agenda and decided issue deficiency letter to the authorisation for submission ofthe following infomation. Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exporrcd. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Mat€rial balance indicating calculative statement of the requirement of each of item for manufacture of each of product. No.:87/15/87‐ALC1/2016 Name:SANGHVI‐ CHNO No/Date:15/87‐ 1/2016 laぅ26.04.2017 ,No/Date:0810139330 19.12.2016 ln : The Committee considered the case as per agenda and decided issue deficiency letter to the Tecbnical descriptionVspecifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufrcturing prooess along with technical justification for wastages claimed at each stage and each Whether the scrap genemted in the process is being reused or not. If not the technical justification for its be fiunished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of itcm for manufacture of each .LD。 product.

No.:92′ 15/87‐ALC1/2016 Name:DSM INDIA PVT. IMcet No7Date:15/87‐ IALC1/2016 レ1&26.04。2017 No/Date:15/87‐ 1/2016 18ι 26.04.2017 : The Commitrce considered the case and decided to refer to DIPP. : The Committee considered the case and decided to refer to DIPP. File:01/87/050ノ00485/AM17/ Ы IRLAⅢ e :31/83/040ノ00196/AM16/ 一 面 ― 卜 面 1 … 5/87oALα 側6F繭 需 ~躍 燃 Iκl l町 ■∝∝87“ OЮ04"ハm71跳 允描 9ρリリ4‐1417 け ら器 31ド01T::| _ lon:The Conlmittee considered the case in the meetmg and decided to approve the ndhoc nornls and llnended as under: EXPORT ITEM QTY IMPORT ITEM QTY Piston Bush made out of Phenolic Moulding Compound of different size and Part Numbers Piston Disc Brake for Caliper 圏 聰 Phenolic Moulding ComPound Grade Durez 30190 E Thermosett Plastic 114129。75 kg RA may take consequential ection 8c pcr Pollcy / Prccedures. 田 No.3115/15r87‐ 12016 Name:JK TYRE& ISTRIES LD。 leet No/Date: こC12016 18じ26.04.20 icINo/Date:01 1.12.2016 DIPP宙de l F,t. ilr. t---- - --- | 87/0s0/00s08 t/.Jltr7t l:0523lM0l004s2tlottt7l 12 ision: As per the written comments furnished by the d26,04.2017, the Committee approved following ad-hoc norms: ′ 静 l血 献 "耐 dl 別側 %| | 血eir letter No。 7/206/2017‐TSWI 153 EXPORT ITEM QTY IMPORTITEM QTY requtrcd for erport of lfi| lg of erport product STEEL RADlAL PASSENGER CAR TYRES ttELESS) REINFORCED WITH POLYESTER TYRE CORD FABRIC 100 kg 1.NATURttL RUBBER 18.46 kg 2.S… TIC RIIBBER‐ PBR 25。63 kg 3.V.PoLATEX 0.10 kg 4.CHLOROBUTYL RUBBER 4.77 kg 5。CARBON BLACK 23.32 kg 6.DIPPED POLYESTER TYRE CORD FABRIC 2.86 kg 7.BEAD WIRE 4.77 kg / 盛群滞欝 aWan,New Deihi_1lo01 晦 開 Itatus: Deferred RLA File 131/83/040/00194/AM16/ LicNo/Date:3110066494 21.12.2016

Case No.:93′ 15787…ALC172016

P田りName:DSM INDIA PVT. ILTD Itetus: Deferred しic.No/Date:3110066495 21.12.2016

9.RUBBER CHEMICALS¨ Antioxidants, 12. Miscellaneoues Chemicals Stearic Acid,slmthetic Resin, Bonding coupling agent Activators, fillers, Dip chemicals Note: l. There should be a value csp on rubbcr chcmlcels Antiorident/Reterder/Acccleretors and miscellaneous ChemimL as per geneni note for chemlcals oftheヨhnd Book ofProcedure9 VoL■610m・ RA may take consequential action as per Policy / Procedures. No.:104/15/87‐ ALC12016 Name:MILTIBASE INDIA No/Date:15ノ87‐ 1ノ2016 LnttTED, 18じ26.04.2017 1541 File:01/87/050/00497/AM17/ File :0310810094 。12.2016 No。895ノ15/87…ALC1/2016 Name:DSM INDIA PVT. INo/Date:15/87‐ 1/2016 18乙26.04.2017 File:01/87/050/00488/AM17/ File 110066510 :31/83/040/00074/AM17/ 12.2016 ) Technical descriptions/specifications, percentage composition (by weight) ofthe products to be exported. ) Detailed manufacturingprocess along with technical justification for wastages claimed at each stage and each ) chemical name, Technical specffications of items proposed to be imported. D Whether the scrap generated in the process is bcing rouscd or not. If not the technical justification for ib non'use nay be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the requirement of each of ircm for manufacture of each of pЮduct. 、LD。 Name:MACRO POLYMERS No/Date:15/87‐ 12016 l aL 26.04。2017 ic]ヽo/Date:0810139384 File:01ノ87/050/00476/AM17/ :08/24ノ040ノ00330/AM17/ .12.2016 10。RIJBBER CHEMICALS‐ Retarder PVI per agenda and decided issue deficiency letter to the 1くκ

Case No.:83715r87‐ ALC12016

動 ¨ ffi case as per agenda and decided issue deficiency letterto the authorisauon for submission ofthe followmg infomation. Technical descriptions/specincatiOns,pOrcentage∞ mposition_Qとwot山00Fthe produm to be■型¨凛 /二__ Government of lndia ,idyog Bhawan, New Delhi-l1i;

D De@ss along wittr rcchnical justification for wastages claimed at each stage and each materials required in the manufacnring process. Whether the scrap generated in the process is being rcused or not. If not the technical justification for its be flrnished. If the scrap is being sol4 the sale value,/commercial value may be indicated. r) Material balance indicating calculative statcment of the requirement of each of item for manufacture of each of product. No.385715/87¨ALCl′2016 1 Name:MACRO POLYMERS No/Date:15/87‐ ヽLD. ALC1/2016 l aE26.04.2017 File:01/87/050/00473/AM17/ File 10139386 .12.2016 : me Co-mittee conSAered the case as per agenda and decided issue deficiency letter to the authorisation Technical descriptions/specifications, percentage composition @y weight) ofthe products to be exporhd. Detailed manufacturing prooess along with rcchnical justification for wastages claimed at each stage and each materials required in the manufactr.ring process. Whether the scrap generat€d in the process is being reused or not. If not the technical justification for its ly be furnished. Ifthe scrap is being sold the sale value,/commercial value may be indicated. Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. Name:MACRO POLYMERS No.386r15/87‐ALC12016 、Lつ。 No7Date:15/87‐ 1,2016 l aζ 26.04.2017 10139387 .12.2016 「いは側椰∽“ "晨m7. File AM17/ ,n : fne Committee considered the case as per agenda and decided issue deficiency letter to the Technical desoiptions/specificatioos, perccntage composition Oy weight) of the products to be cxported. Detaile.d manufacturing process along with technical justification for wastages claimed at each stage and each Whether the scrap generated in the process is being reused or not. If not the tpchnical justification for its be firnished. If the scrap is being sol4 the sale value/commercial value may be indicated. Material balance indicating calculative statement ofthe requrement ofeach ofitem for manufacme ofeach of No/Date:15/87‐ 1/2016 l d1 26.04。2017 File LicoNo/Date:3110066517 1/83/040ノ00163/AM16ノ 。12.2016 )n:The Conlmittee considered the casc as per agenda and decided issue deflciency letter to the authorisation for submission ofthe following infomation. Technical ofthe to be 八 G_overnment oi rnoi" --", urryog Bnawan, New Delhi_11001i

Case No.:91′ 15/87‐ALC1/2016 11電

子 Name:DSM INDIA PVT. Itrtur: Deferred 「IQ File:01/87/050/00484/AM17/ ,lr C:neral

161 justification for wastag$ claimed u each stage aad each Chemical narne, Technical specifications of items proposed to be imported. be furnished. If the scrap is being sol4 the sale value/commercial value may be indicated. ) Material balance indicating calculative statement of the rcquirement of each of item for manufacture of each of product. Name:AMAR CIIAND& No/Date:15/87‐ 1/2016 18じ26.04.2017 File:01/87ノ050/00524/AM17/ Fllo 。No/Date:3010103917 12.2016 The Co.mittee considered the case as per agenda and decided to call for the Import licence from holder. S.3.S.REDDY al Director Ggneral of Fo 3e.neral o.'Forei

f Ccmmerce & lr lernment of lnd awan, New Delhi No.:77ノ15ノ87…ALCl′2016 1 1疑州態 IJ"‐ File Ю1/87/050/∞470/AM17/1RLA Fllo 知w 階渕貯Ю 3Ю8皿釧 ffin commcnts furnished by the DIPP vide their leuer No.7l22D0 l9.O4.2Ol7,the Committee approved following adhoc norms: 7 160 EXPORT ITEM QTY IMPORTITEM Qty requlred per unit of ftnlrhcd good Rubber Floor Covering & Mats 300000.00 Kg 1.Namal Rubber 0.16622 kg 2.EPDM Synthetic Rubber 0.3960 kg

3. Zinc Carbonate 0.020533 kg
4. Anti oxidant, Kumano>r, IONOL 0.011733 kg 5.Accelerators CBS 0.014666 kg
5. Accelemtors ZDBC 0.011733 kg
6. Relevant PVI 0.011733 kg 8。 Carbon Black 0.088 kg
7. Ppt. Silica Filler 0。16622 kg 10.Bonding Agent SI‐69 0.013689 kg 11.Processmg 011 0.0528 kg 12.Reclaim Rubber 0.10266 kg Note: There should be a value cap upto 7o/o of FOB value of erport for AntioridanUAcceleraton/Retarders. RA may take conscquentill actlon as per Policy / Prccedures. iCase No.:131′ 15r87ⅢALC12016

COMPOIJNDS PVT.LTD。 :05/24/040/00481/AM17/ No.:127/15/87‐ ALC12016 No/Date:15ノ87‐ 1ノウ016 l aζ 26.04.2017 「 Q Hb Юν 87Ю50Ю0520/AM17 ,No/Date:0510401006 1.2017 : The Committee considered the case as per agenda and decided issue deficiency letter to the Technical descriptions/specifications, percentage composition @y weight) of the products to be exported. Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ) Chemical name, Technical specifications of items proposed to be imporrcd. Whether the scrap generated in the process is being rpused or not" If not the t€chnicd justification for its non-use be furnished. If the scrap is being sold, the sale value/commercial value may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for manufacture of each of product. Nnme:SPERRY PLAST No/Date:15/87‐ 16 18ι 26.04.2017 File ,No/Date:0510401071 :05/24/040ノ00491/AM17ノ : The Commitrce considered the casc as per agenda. Committee decided to defer the case to examine ofthe autho五sation holder. No/Date:15/87¨ 1ノ2016 l a526.04。2017 ,No/Date:0510401070 : The Committee considered the case as per agenda. Committee decided to defer the case to examine of the authorisation holder. No/Date:15ノ87‐ 1ノ2016 l dι 26.04.2017 File 110066534 1/83ノ040/00067/AM17/ : The Committee considered the case as per age,nda. Commitrce decided to defer the case to examine the ofthe authoHsation holder. No.8129715787‐ ALC12016 : Name:VIKAS ECOTECH No/Date:15/87‐ 12016 LIMITED 18し26.04.2017 File:01/87/050/00522/AM17/ File LicoNo/Date:0510401072 卜 05/24/040ρ 0495/AM17/ 1.2017 rn : The Committee considered the case as per agenda and decided issue deficiency letter to the Tecbnical descriptionVspecifications, percentage composition @y weight) of the products to be exportcd. File:01ノ87ノ050/00466/AM17/ File:01/87ノ050/00467/AM17/ HQ File:01/87/050/00487/AM17/ Detailed manufacturins Drocess alons with rcchnical iustification for wastages claimed at each S.B.S. Addlional Direclor Coneral Directorate Ge,.r"riiol ibreifi iral Ministry of Commerce & ln-clustry Gcvernment of lndia

Case No.:73/15/87… ALC12016

Casc No.374715/87‐ ALC12016 P田けName:SPERRY PLAST LTD. Status: Deferred U/」yog Bhawan,New Delhi‐ 1lool

materials required in the manufacnring process. Whether the scrap generated in the process is being ncuse.d or not. If not the technical justification for its be furnished. If the scrap is being sol4 the sale value/commercial value may be indicarcd. Material balance indicating calculative statement ofthe requrenlent ofeach ofitem for manufacme Ofeach of product。 No.:116/15/87‐ ALC1/2016 Name:Ao MoPOLYPLAST No/Date:15/87‐ 1/2016 PRIVATE LIMIttD ldじ26.04.2017 : The Committee considered the case as per agenda and decided issue deficiency lettcr to the Technical descriptions/specifications, percentage composition (by weight) ofthe products to be orported. ) Detailed manufacturing prooess along with technical justification for wastages claimed at each stage and each Whether the scrap genemted in the process is being reused or not. If not the technical justification for its be furnished. Ifthe scrap is being sold the sale value/commercial value may be indicated. ) Marcrial balance indicating calculative statement of the requirement of each of ircm for manufacture of each of product. No.:117/15/87… ALC1/2016 Name:BLS POLYMERS No7Date:15ノ87‐ 12016 l aι 26.04.2017 ,No/Date:0510401161 .01。2017 The Committee considered the case in the meeting and decided to sppnDve the adhoc norms and as under: No.872715/87‐ALC1/2016 Name:StIMLON No/Date:15/87‐ 1/2016 ,YESl阻R LIMI「ED laじ26.04.2017 ,No/Date:5210042131 11.01.2017 .Ornment Ofindil aWan,New DeihL File:01/87/050/00510/AM17ノ W Stabilizer Master Batch (containing not less than 20o/o W Stabilizer) RA may take consequential action as per Policy / Procedures. File:01/87ノ050/00465/AM17/ File:01/87/050/00509/AM17/

No.:88/15/87‐ALC1/2016 Name:MACRO POLYMERS No/Date:15/87‐ 172016 18じ26.04.2017 ヽLつ。 Deferred 「 QⅢ∝m慇7Ю "Ю“ 田ハm71鵬 鵬 OЮ0421/AM″ rn : The Committee considered the case as per egenda and decided issue deficiency letter to the authorisation ) Technical descriptionVspecifications, perc€ntage composition (by weight) of the products to be e:rported. Detailed manufactuing prcess along with technical justification for wastages claimed at each stage and each be ftrnished. Ifthe scrap is being sol4 the sale value/commercial value may be indicated. ) Marcrial balance indicating calculative statement of the requirement of each of itcm for manufacture of each of product. No.:89/15/87‐ALC172016 P錮けName:MACRO POLYMERS P.LTD. File:01/87ノ050/00482/AM17ノ | File AM17ノ : The Comminee considered the case as per agenda and decided issue deficiency lettcr to the authorisation Technical descriptionVspecifications, percentage composition @y weight) of the products to be exported. Detailed manufacturing process along with technical justification for wastagcs claimed at each stage and each ) Chemical name, Technical specifications of it€ms proposed to be imporrcd. Wheter dle scmp genented in dle process t beng reused or not.If notぬ e"chnicdjustiacation for its be fimrished. Ifthe scrap is being sold" the sale value/commerpial value may be indicarcd. r) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of product. 11.01.2017 ICaseNo.:1051働17¨ ALC12016 1111ill!::ξ :ざ1lI◆ATE Ⅵeet No/Date:15/87‐ 1 へLC1/2016 1 218ζ 26.04.2017 : F:TずI椰的 T9撃m7性念卵叩囲1鰤7 H¶辮憫ド田∵9「 曖暇れ洲7篤恩点織l』:Ⅷ謂盤 lc鷺点:HP耐ehH饉げ口“側7 EXPORT ITEM QTY IMPORT ITEM QTY Article of IIDPEILLDPE Bags ofPolyethylene l kg HDPE/LLDPE Gmmules eecyciedl 1.05 kg/lcg content of HDPE and LLDPE each contained in the export product / RA may take consequentiel action as per Policy / Procedures. 為 A Ariditlonal Director General oi [creig,l 'ii'iul Directoi'ate Gs,leral o. Forei-'n Trade tjiinistry of Commeice & lndustry Governrnent of lnciia tjcJyog Bhawan, New Delhi-1'10011 ユ′υ Status: lpproved

No.:128/15r87‐ ALC12016 Name:VIKAS ECOTECH RLA File :05/24/040/00494/AM17/ No.:75/15r87¨Al`C1/2016 P田りName:AAKASH POLYTILMS LIMITED P肛りName:PLASW INDlA LIMIm 18じ26.04.2017 File:01/87/050/00468/AM17/ File :52/24/040/00068/AM17/ : The Committee considered the case as per age,nda. Committee decided to defer the case to examine ofthe authoHsation holder. No.:76r15/87‐ALC1/2016 No/Date:15/87‐ 1/2016 18じ26.04.2017 icoNo/Date:0510401251 INo/Date:15/87‐ 12016 INo/Date:15/87‐ 1/2016 laじ26.04。2017 File:01/87/050/00469/AM17/ RLA File :3724/04(ソ00009/AM17ノ ,No/Date:3710002664 The Committee considered the case in the meeting and approved ar appllcd for by the holder in their Advanced Authorization. 17 LicoNo/Date:5210042143 F… 73/1S/8鶴α tt61w灌言即S鵬鵜II・1師 鵬島泥mЮ餌./AMW 脇 職0,"釧/AM7 1瑚 WeЮ 畑 “ %|「 躊 讐れ.知lh『臨 i胤 淵 胤 躍 期 。LttFPP宙 “ 肺 眈∝口 爛例 7 EXPORT ITEM QTY IMPORT ITEM QTY RECOMMENDED PER KG OF EXPORT 「 EM FLLED COMPOUND PP‐ POLWJHITE 94WS cOrmG211/‐ 1%PP COPOLYMER 61/‐ 10/0 ■TANIIM D10XDE AND 73+ノ‐ 1%CALCIUM CARBONATEl 1,00,000 kg 1.POLYPROPYLENE COPOLYMER 0。2163 kg 2.T「ANIЛИ D10XDE 0.0618 kg 3.CALCIIM CARBONA‐ 0。7519 kg RA may take consequential action as per Policy / Procedurcc. Meeting ended With a vote Ofthanks tO the chair. ●ホ拿攀●●●中*●ホ B.s.RED 10r Ceneral 36ilera1 01 commerc 1ら 珈 ¨ HQ File:01/87/050/00521/AM17/ ｍ ¨