DGFT Committee Minutes

ハ Minutes ofNORMS CONIMI…E(NC‐7)OF PLASTIC&RUBBER PRODUCTS' MEE]NG N014/AM17 oELD ON 20.I12.2017,03&09.03.201つ UNDER THE CHAIRMANSHIP OF SHRIS.B.S.REDDY9ADDL.DGFT Meeting No.14/87‐ NC‐7/2016ofNORMS COMMI「TEE(NC‐つdealing withChapter 39 8nd 40ofrrc cs)cOde'held on 20.02.2017,03&09.03.2017,underthe Chahnmship of ShH S B S Rcddy,Addl DGFT,Directorate Gcncml of Foreign Trade,Depannlcnt Of Commerce,Udyog Bhawan,New Delli‐ 11001l Following ofrl∝rs attended the Meeting: l) Shri Nand L^al, Consultant, DIPP 2) Shri Seikhomang Kipgen, Dy. DGFT 2. Following are the decisiom of the Norms Committee after deliberation and RA concerned shall take consequential ection as per Foreign Trade Policy/Procedures: DIANUAL CASES Request:Amendment h the des面ption of Expo■Product to read as“ Articles made out of Cross Laminated Multilayer FiLn i e.Tarpaulins,Covers"against Advance Authorization No 0310792783 dated 09.012015 Decision 3 The Committee considered the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Committee decided to issue deficiency letter to the authorisation holder for submission of the following information. (a) Copy oflicence (b) Complete application (c) Copy of online pmtout

Case No.A‐228

SttME INDUSTRIES LTD. HQ F.No 01/87/162/00015/AM16/DES‐ VII Status: Deferred NC No.:14/ADI117 Dated:20.022017 Adv.Lic.No. 0310792783 dated 09.01.2015 RAF No 03/93/160/00680/AM15

Case No.A'31

NEWAGE LAINATORS M LTD。 HQ FoNo 01/87/050/00465/AM14/DES‐ VⅡ Status Approved NC No.:14/AM17 Dated:20.02.2017 Adv Lic No 0510376612 dated 20.01.2014 RAF No 05ノ24/040/00394/AM10 Requert: Declrion: Enhanccment ln the qurntlty of Import Item allowed by NC ageinrt Advence Authorizedon No. 0510376612 deted 20.011014 The Commitlee considered the case in the meeting and approved as rpplicd for (i.e 0.299 kgs of input item per kg of export item) by the authorisation holder in their Advanced Authorization. RA may take consequentlal actlon as per Pollcy / Procedures. ＼ ´》

Request: Firation of edhoc norms in rtspect of Advrnce Authorizetion No. 0310773t69 dated 11.03.2014. Decision: The Committee considered the case and decided to epprove on rrpeat basis (Adhoc Norms) based on the decision of the NC Meeting No. 16187-ALCll20l15 held on 28.08.2015 and recommended as under: EXPORT rrEM QTY IMPORT ITEM QTY PVC Cling Film l kg Polyvinyl chloride Resin 0.6859 kg Di Octyle Adipate 0.2400 kg Epoxidised soyabean Oil 0.0045 kg Stabil● "r LTX‐ 630P 0.0065 kg Antifog agent eikemal mA‐ 01) 0 0065 kg RA mry trke cons€quentiel ection as per Policy / Pnocedurcs.

Subject: Enhancement in the wastsge allowed by NC in its Meeting No. 0E/AMI6 held on

29.05.2015. Decision: The Committee considered the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Committee decided to issue deficiency letter to the authorisation holder for submission ofthe following information. a) Details of composition of export item. b) Production, consumption data of the export product for the last tkee years duly certified by the Jurisdictional Central Excise Authorities.

Case No.A‐243

Pandise p●脚ne" Ltd" Mumbai HQ F,No. 01/87/050/00058/AM15/DES‐ Ⅶ Status: Approved NC No.:14/AM17 Dated: 20.02.2017 Adv.Lic No 0310773869 dated ll.03.2014 RAF No 03ノ95ノ040/00968/AM14 Cnse No.A‐2611 lWc Yash Enterprises HQ F.No. 01/87/50/00433/AM15/DES‐ VH Status Derered NC No.:14/AM17 Dated: 20.022017 Adv.Lic No 0310791655 dated 03 12 2014 RAF No. 03/95/040/00595ノAM15 2

Request: Firetion of adhoc normr in respect of Advence Authorization No. 0710107263 dated 23.12.20t4 Decision: The Committee considered the case in the meeting and decided to approve the adhoc norms as follows: Request: Firation of adhoc norms ln rrspect of Advrnce Authorization No. 311(M5il75 dated 06.04.2015 Decision: The Committee considered the case an per agenda and noted that the export itEm is nos and importing in meter. Thus, the Committee decided to reject the case as adhoc norms cannot be fixed. C"e No.A‐406 MおPava卜Petrochem pvt.Ltd. HQ F.No. 01/87/050/00212/AM15/DESギ‖ Status: Dererred NC No.:14/AM17 Dated:20.02.2017 Adv Lic.No 0510386973 dated 21.052014 RAF No. 05/24/040/00434/AM14 SuЦ eCt:ReviJon of input Output norms in respect of Advance AuthorLation No.0510386973 dated 21.05。2014 DecLion: The Conlmittee considered■ e case as per agenda and decided to cal for me fol10wing infomation. Production,consumption data of the export product for the last three vears duly certined by the

Case No.A‐402

l\tUr Imoge Labelr hrl Ltd. ⅡQ R No. 01J87rlH1/1xM12/AM157DESVII sat“ : Approved NC No.:14/AM17 Dated:20.02.2017 AdvoLL No.●nd Dnte 0710107263 dated 23.122014 RLA Fo No. 0724rlHylxB39/AM15 EXPORT rrEⅣI QTY IIIPORT rrEM QTY Polyester PHnted Self Adhes市e Labcヽ.(contammg input item l: 9166.6 kgs; input item 2:8333 4 kgs) 17,500 000 kg 1.Polyester FiLnノSheet(125 microns to 500 microns) 9533 3 kg 2. Double Sided Adhesive Tape with Release Paper 8666 7 kg RA msy trke consequentiel ection er per Policy / Pnocedurcc.

Case No.A‐405

IWs Pune Metagraph, EQ FoNo.017877050/m01/AM16/ DESVII Status: Rei∝ted NC No.:14/AM17 Dated:20.02.2017 Ad“ Lic.No.8nd D3te 311¨ 75 dBted 06.042015 RA FoNo。 31/83/040/00253/AM15 Jurisdictional Central Excise Authorities'

Cnse No.A‐407 M/8 Ktt Poune"& Chemid8 Ltd。, HQ F.No 01/87/50/181/AM16/DES‐ VⅡ Status: Approved NC No.:14/AM17 Dated:20.02.2017 Adv Lic No and Date 0510395439 dated 26.082015 RAF No. 05/23/040/00220/AM16

Subject: Amendment in the description of Erport Product rgrinst Advence Authorizetion

No. 051039389 datcd 26.08.2015. Decision: The Committee considered the cose and decided to epprove the arnendment as requested by the firm to read the Description of Export produot as (PVC Compound (Foam Grade)" insteed of "PVC Compound (Iransperent Grede)" RA msy td<e coDsequentiel action ar per Policy / Pnocedurcs.

Subject: Amendment in the description of Erport Prcduct and Import item No.2 ageinst

Advance Authorizetion No. 0510395693 detcd 22.092015. Decision: The Committee consider€d the case and decided to rpprove the amendment as request€d by the firm to read the Description of Export product as (XLPE Compound Master Batch' instead of ")0-PE Cstdyst Mrster Brtch' and description of import it€m No.2 to read as cDibutyltin Dilaurate @BTL)' instead of (Dibutyltin Didurote (DBTL)' RA Dey trke coDsequentiel rction u per Policy / Procedurts.

Subject: Firetion of edhoc norms in reepcct of Advrtrce Authorizstion No. 0310751263

dt.10.122013

Case No.A‐408

M/s KLI Polymerg& ChemicalB Ltd。, HQF No 01/87/50/254/AM16/DES― VⅡ Ststus: Apprcved NC No.:14/AM17 Dated:20.0212017 Adv Lic No and Date 0510395693 dated 22.09.2015 RAF No 05/23/040/00249/AM16 /50/419ノAM14/DESVII International F.No.03/93/040/7211/AM14 Lic.No.and Date d■10。12.2013 NC No.:14/AM17 Dated:20.02.2017 Decislon: This case was discussed in ths 5ssting aDd decid€d to defer the case 4

Cnse No.A‐429 lltUr Intcrnedonel Conveyorr Ltd. HQ F.No. 01/87750/421/AM14/DESVII Ststus: Deferrcd NC No.:1″ 劇M17 Dated:20.02.2017 Adv.Lic No.and Date 0310761253d■10.12.2013 RA F.No. 03/93/040/7311/AM14 SubieCt: Fintion of adhoc nonlls in respect ofAdvュnce Autho」レ3■o■No.0310761253 dt 10。12.2013 Decision: This case was dLcussed h the meethg and decided to defer the case

Subject: Fixation of adhoc norms ln respect of Advance Authorizetion No. 0310761261)

dr. 10.12.2013 Decision: This case was discussed in the meeting and decided to defer the case. SubieCt: Amendmentin the d“cHption of lmportitem No.14 ogainst Advance Autho山 “ ■o● No.3110065890 dt 25.012016 D∝ision: The Conlmittee∞nsidered the case as per agenda.Commttee decided to defor the case to cxamine the request ofthe auuloHsatiOn holder. DEф鷺:よ税「P謝 mnは Z°j柵肺禽 UGyoJ alla、van,■|:J〔 Cnse No.A‐430 ll[/c Intcrtrrtionrl Conveyors Ltd. HQ F.No 01/87/50/422/AM147 DESVII Status: Deferred NC No.:14/AM17 Dated:20.022017 Adv.Lic.No.and Date 0310761260 dt 10。122013 RA F.No.03/93/040738/AM14 .Lic.No.and Date 110065890 dt. NC No.:14/AM17 D3ted:20.022017

Arkema Chetrlicals hdia Ltd, 1/87ノ050/00187/AM17/DES‐ 10806727 dt.29.07.2016 NC No。:14/AM17 Dated:20.022017 Subjectr Ratificetion oflnput Output Normr rgrinst Advance Authorization No 03 10806727 dt. 29.07.2016 Decision : The Committee considere.d the case as per agenda. Committee decided to defer the case to examine the request of the authorisation holder. The basis of earlier norms fixation may be examined on file urgenty and thereafter be placed below committee for appropriate decision. Requet Firetion of input output nom! ogeinrt Advence Authorization No. 071009f Gi7 deted 30.10.2012. Decision: The Committee considered the case as per agenda and noted that the export item is nos and importing in kg, Thus, the Committee decided to reject the case as adhoc norms cannot be fxed. Request Request for enhancement in quantity and value proportionately for imports and exports against Advancc Authorization No. 0810137686 dated 15.04.2016. Decision: The Committee considered the case as per agenda and noted that the description of export item is not olearly defined. It is not possible to work out qty. of inputs. Therefore, the Committe€ decided to reject the case. Pavaman Poly Products hrt. 62/00106/AM17/DES 10091637 dated 30.102012 NC No.:14/AM17 Dated:20.022017

Case No.A‐436

MH血 血 ■●‐Up Pvt.Ltd. HQ F.No. 01/87ノ162ノ001115/AM17/DES VII stBm: Rei∝ted NC No.:14/ADE17 D3ted:20.022017 抽 .Llc.No.8nd Date 0810137686 dated 15.04.2016 RA Fo No. 08/24/040/00003/AM17 1/87/171/184/AM17/DES‐ VII . Lic. No. and Date (l) 0151653 dated 07.12.2010, 0210157412 dt.07.04.2011, 3)0210149110 dt ll 10.2010, 4)0210158805 dt 12.05.20H, 5)0210160919 dt 22.06.2011, 0210161207 dt 24 06 201 NC No.:14/AM17 Dnted:20.022017

(7)021016121l dt 24 06.2011, (8)0210167257 dt.30.09.2011, (9)0210167749 dt 19 10.2011, (10)0210167881 dt 21 10 2011, (11)0210167970 dt.24.10.2011, (12)0210167258 dt.30.09.2011, IInd (13)0210166629 dt 23 09 2011 Requelt! Inclusion of Erport Item - Benzene. Decision: Committee discussed the case and it was mentioned by the party in their letter that norms for Benzene have already been approved. Therefore committee felt that since norms have already been approved, there is no further action pending at Norms Committee level. Committee decided to inform the same to the party.

Subject: Relixation of edhoc noms in respect of Advance Authorizetion No.0310744t16

dated 06.0E2013 Decision: The Committee considered the request of authorisation holder for Refixation of adhoc norms and it was decided to tum down the request of authorisation holder maintaining the decision taken by NC it its earlier Meeting No. l6lAMl6 held on 28.0E.2015.

Case No.A‐439

tws Veekay Polycoats Ltd. HQF No 01/87ノ050/00146/AM13/DES‐ VΠ stam: Reiected NC No.:14/AM17 Dated: 20.02.2017 Adv.Lic.No. 0510329142 dated 09.07.2012 RAF No 05/24/040/00107/AM13 SubieCt: Amendmentin the descnptio■ofExport Product agai"t Advュnce Autho鰤o■ No.0510329142d●09.072012 Decision: The Conlmittee∞nsdered the request of authoHsation holder for Amendment in the description of Export Product and it was decided to tun dom the requett of authoHsation holder maintainhg the decision taken by NC i tt earlier Ⅳb誠 ′

Case No.A‐438

Paradtte Po■me" Ltd" Mumbni HQF No 01ノ87/050/00196/AM14/DES‐ VII Status: Rejected NC No.:14/AM17 Dated: 20.022017 Adv Lic No 0310744316 dated 06.082013 RAF No 03/95/040/00370/AM14

Case No.A「440

M/s Haldia Petrochemicals Ltd. HQ FoNo。 01/87/171/165/AM17/DES‐ VⅡ Stetus: Dirposed NC No.:14/AM17 Dated:20.02.2017 Adv Lic.No.and Date 0210168071 dated 24 10.2011 RA R No. 02/24/040/0014ハ』412 Request: Inclusion of Erport Item - Cyclopentsne. Decision: Committee discussed the case and it was mentioned by the party in their letler that norms for Cyclopentane have already been approved. Therefore committ€e felt that since norms have already been approved, there is no further action pending at Norms Committee lovel. Committee decided to inform the same to the party. Requertr Inclusion of Erport Item - Py G.!. Decision: Committee discussed the case and it was mentioned by the party in their letter that norms for Py Gas have already been approved. Therefore committee felt that since norms have already been approved, there is no firther action pending at Norms Committec level. Committee decided to inform dre same to the party. Request: Inclusion ofErport Item - Butodiene. Decision: Committee discussed the case and it was mentioned by the party in their letter that norms for Butadiene have already been approved. Therefore committee felt that since norms have alr€ady been approved, there is no firther action pending at Norms Committe€ level. Commitee decided to inform the same to the party.

Case No.A‐441

Mノs IIaldia Petrochemicals Ltd. HQ FoNo. 01/87/171/166/AM17/DES‐ VⅡ Stst$: Dbpoccd NC No.:14/AM17 Dated:20.02.2017 Adv.Lic.No and Date 0210167080 dated 29.09.2011 RA FoNo. 02/24/040/00104/AM12

Case No.A‐442

墨、Haldia Petrochemicals Ltd. EQ F.No. 01ノ87/171ノ173/AM17/DES‐VⅡ Statur: Dbpocd NC No.:14/AM17 Dated:20.02だ2017 Adv.Lic No.and Date(1) 0210156141 dated 14.03.2011,(2) 0210155759 dt.03.03.20H,(3) 0210155593 dt.01.03.20H,(4) 0210155033 dt.18.02.20H,(5) 0210156653 dt 23 03.2011,(6) 0210150407 dt.H.H.2010 and(7) 0210149113 dt.11.10.2010. RA Fo No.¨

Case No.A‐443

M/s Pavaman Poly Products Pvt. Ltd. HQ FoNo. 0187/162/1XU6/AM177DES Ⅶ Strtui: Rejected NC No.:14/ADE17 Dated:20.02.2017 Ad■Lic.No.3nd D8te 0710092949 dated 07.01.2013 RA F.No. 07/24/040/00416/AM13 Request: Fixation o, lnput output norms agalnst Advancc Authodratlon No. 0710092949 dated 07.01.2013, Decision: The Committee considered the case as per agenda and noted that norms cannot be fixed based on the details fumished by party. Therefore committee decided to reject the case.

Subject: Flxatlon of Standard lnputOutput Norm3 for the export product "Heat Shrlnkable

Moulded Parts". Development commlssloner sEEPz vlde thelr letter dated sEEPz-sEz/EoullzlzooaT lvol- v/08839 dated 18.0{.2016 forwarded the appllcatlon for flxatlon of norms. Decision : The Committee considered the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Committee decided to issue deficiency letter to the authorisation holder for submission of the following information. a) Technical descriptionVspecifications, percentage composition (by weight) of the products to be - exported. b) Detailed manufacturing process along with technical justification for wastages clsimed at each stage and each ofthe materials required in the manufacturing prooess. c) Chemical name, Technical specifications of items proposed to be imporled, especially C-9. d) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may be fumished. If the scrap is being sold, the sale value/commercial value may be indicated. e) Material balance indicating calculative statement of the requirement of each of item for manufacture ofeach of export product. f) Comple6 Chemical reactions with molecular and sfuctural formula and molecular weights along with stage-wise % yields on molar basis. g) hoduction, consumption data of the export product for the last three years duly bond officer. cedied by the Reychem RPG Ltd., 1/87/162/00006/AM17ノlDES‐ NC No。:14/AM17 D3ted:20.022017

C"e No.A‐446 Mrs sakata inx“ndh,PVt.Ltd HQ F.No. 01787/50/131/AM12/DESVII Status: Approved NC N●.:14/AM17 Dated:20.02.2017 Adv.Lic.No.and Date 0510296371 dated 12.07.2011 RA FoNo. 05/24rm7001o4/AM12 Subject! Request for corectlon of lmport product quantlty ln respect of Advance Authorlzatlon No. 0510296371 dated 12.07.20u Declslon: The Committee considered the case as per agenda and decided to review its decision taken in Meeting No. 25lAM12 held on 28.09.2013 and decided to read the measurement of quantity of export item'kg: instead of 'MT'. Besides this, there is no other change in the decision taken in earlier NC Meeting.

Subject: Request for correctlon of lmport product quantlty ln respect of Advance

Authorizatlon No. 0510330418 datad 21,07.20L2 Declslon: The Committee considored the case as per agenda and decided to review its decision taken in MeetinS No. 22/AM13 held on 30.08.2012 and decided to read the measurement of quantity of export item 'kd instead of 'MT'. Besides this, there is no other change in the decision taken in earlier NC Meeting. Sakata inx{ind:a)Pvt. .Lic.No.and Date 10330418 dated NC No.:14/AM17 Dated:20.02.2017 Case No, A-448 Mrssakata in=“ ndh)PUt. Ltd HQ F.No. 01/87/50/61/AM141DESVII Status: Approvcd NC No.:14/AR117 Dated:20.02.2017 Adv.Lic No.and Datc 0510353043 dated 02.05.2013 RA R No. 05ノ24/040700441/AM13 SubJect: Declslon: Request for corre“ lon of import product quantitv :n respect of Advance Authori2ation No.0510353043 dated 02.05。2013 The Commtte considered the case as per agenda and decided to review tts decヽ ion taken in Meeting No 19/AM14 held on 20.08.2013 and decided to read the 朧躙 珈 m∬ 響 胤 ¨ 燃山 」鯰 ン / 10 η

Case No.A‐449

IWs JK Prre! Polycoats Ltd., HQF.No. 01/84/Ou1/1x1147ノAM13 DES「 Ⅷ Status: Deferred NC No.:14/AM17 Datod:20.02.2017 Adv.Lic.No.alld Date 0510329277d●10.072012. RA Fo No. 05241HlrlXX1131/AM13 Request: Amendmentin the desc」ption ofExPort Product against Adv3■ Ce AuthoJL8■on No. 0510329277 dt.10.07.2012. Decislo●:The Committee considered the case as per agenda and decided to refer the case to the DIPP Subject3 Flxatlon of Standard-lnput Output Norms - for the export product 'Black Retenerated Methyl Methacrylate Monome/. Decision : The Committee consider€d the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Committee decided to issue deficiency - letter to the authorisation holder for submission ofthe following information. a) Technical descriptions/specifications, perc€ntage composition (by weight) of the products to be exported. b) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ofthe materials required in the manufacturing proc€ss. c) Whether the scrap generet€d in the process is being reused or not. If not the technical justification for its non-use may be fumished. If the scrap is being sold, the sale value/commercial value may be indicated. d) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of export product. e) Complete Chemical reactions with molecular aod stuctural formula and molecular weighs along with stage-wise % yields on molar basis. f) Copy of import licence issued for acrylic plastic scrap etc. Subject3 Enhsncement in the wartage allowed by NC ln it! Meeting No. 16/AMl6 held on 28.08.2015. Decision : The Committee considered the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, tho Commiftee decided to issue deficiency / le$er to the authorisation holder for submission of the following information. -,t / e-C^4 Lt r\hr- <

Case No.A‐450

M/s Prlme Erponerc, Jamnatar EQ R No. O1/87/162/44/AM17/DESVll Ststus: Deferred NC No.:14/AM17 Dated:20.02.2017 Adv.Lic.No.and Date― SEZ F.No. KASEZ/100%EOU力!/493/98/Vol.: 1ノ87/50/00168/AM15/DES‐ VII ソ24/040/00083/AM15 .Lic.No.0710105189 19.06.2014 NC No.:14/AM17 Dated: 20.02.2017

a) Technical descriptions/specifications, percentage composition (by weight) of the products to be exported. b) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ofthe materials required in tho manufacturing process. c) Chemical name, Technical specifications of items proposed to be imported, especially C-9. d) Whether the scrap generated in the process is being reused or not. If not the technical justification for its non-use may be fumished. If the scrap is being sold, the sale value,/commercial value may be indicated. e) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of export product. fl Complete Chemical reactions with molecular and structural formula and molecular weights along with stage-wise 0Z yields on molar basis.

Subject: Flxatlon of adhoc norms ln respect of Advance Authorlzatlon No.2410041736 dated

04.06.2015 Decision: The Committee considered the csse in the meeting and approved adhoc norms as follows: Export item Qty nIPORT ITEM Qty Eva placemats (Embossed/olain/printed/laminated) 666667Ⅲ Eva Rcsin 700Ⅲ RA mry t ke cou€quentid rcdon u per Policy / Proceduneo.

Subject: Flxatlon of adhoc norms ln respoct of Adv.nca Authorhatlon No. 2411[41782 deted

23.0720t5 Decision: The Committee considered the case in the meeting and approved adhoc norms as follows: ExpOrt item 的 IMPORT ITEM 的 Eva placomats fEmbossed/plain/p血 “ dllamhatcめ 666.667耐 Eva Resh 700 Mr RA may take consequentid action er per Policy / Procedurer. Ihi‐ 14 “ 爛 C"e No.A‐452 Mrs Essen Sp目■ia‖ "日 :m■ Pvt.Ltd。 HQF No 01ノ87/162/100/AM17ノDES‐VⅡ Status: Approved NC No.:14/AM17 Dated: 20.l122017 Adv Lic No 2410041736 dated 04 06.2015 RAF No. 24/24/040/00006/AM16 C"e Noo A‐453 Mrs Essen S… :al‖け F‖ msl Pvt.Ltd. HQ F.No. 01/87/162/101/AM17/DES‐ VⅡ Status: Approved NC No.:14/AM17 Dated: 20.02.2017 Adv.Lic.No 2410041782 dated 23.07.2015 RA F,No 24/24/040/000C19/AM16 12

Case Noo A‐454

Mrs E"en Spectialtt HimsI Pvt.Ltd. HQF No. 01ノ87/162/102/AM17/DES‐ VΠ Status: Approved NC No。:14/AM17 Dated: 20.02.2017 Adv.Lic No 2410041783 dated 23 07 2015 RA F.No. 24/24/040/00009/AM15

Subject: Flxatlon of adhoc norms ln r$pect of Adu.ncc Authotlzatlon No. 241lXXl7&l deted

23.07.2015 Decision: The Committee considered the case in the meoting and approved adhoc norms as follows: Export ilem ∞ IMPORTITEM Qty Eva placemats Gmbossed/olain/orinted/luninated) 47.619Ⅲ Eva Resin 50 MT RA may talre conrequentid ection er per Pollcy / Prccedurts.

Subject: Flxatlon of adhoc norms ln respect of Advance Authorkatlon No. 2411X1418:i0 drted

29.09.201s Decision: The Committee considered the case in the meeting and approved adhoc norms as follows: ExDort item Qty IMPORT ITEM " Eva placemats (Embossed/Dlain/printcdlaminated) 666667Ⅲ Eva Resin 700 prr RA may take comeque耐回 ““ ロロ3 per POucy/Pttredures・

グ

Case No.A‐455

Mrs Essen Sp自魔la‖ "F‖ m勁 Pvto Ltd. HQ F.No. 01/87/1621106/AM17ノDES‐VⅡ Status: Approvcd NC No.:14/AM17 Dated: 20.022017 Adv Lic No.2410041830 dated 29 09 2015 RA FoNo 24/24/040/00017/AM16 13 NG K:P6已i[ or Cenenaサ al●f Foreicn Tにごじ nerce&induSty 6i::;nment of lnr.iia UiyrJ i;rat',afl, l.i-'J Deihill

Case No。■456 Mrs E"博n Spalali"日:m■ Pvto Ltd. HQF No 01/87/162/111/AM17/DES‐ VⅡ stam鶴 DeFe嗣 NC No。:14/AM17 Dated: 20.02.2017 Adv.Lic.No.2410041892 dated 08.01.2016 RA F.No. 24/24/040/00032/AM16 Subject: Flxatl●n of adhoc normsin respH■of Advance Author12atiOn No.2411XM1892 dated 08.01.2016 Decision : The Committee considered the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Commitrce decided to issue deficiency letter to the authorisation holder for submission ofthe following information. a) Technical descriptions/spocifications, peroentage composition (by weight) of the products to be exported. b) Detailed manufacturing process along with technical justification for wastages claimed at each stage and each ofthe materials rcquired in the manufacturing proc€ss. c) Chemical name, Technical specifications of items proposed to be imported, especially C-9. d) Whether the scrap generated in the process is being reused or not. Ifnot the teohnical justification for its non-use may be fumished. If the scrap is being sold, the sale value/commeroial value may be indicated. e) Material balance indicating calculative statement of the requirement of each of item for manufacture of each of export product. f) Complete Chemical reactions with molecular and structural formula and molecular weights along with stage-wise % yields on molar basis.

SubJect: The Committee considered the case in the meeting and approved adhoc norms as

follows: Export Lm Qty lMPORTITEM Qty Eva placemats (Embossed/plain/orinted/laminated) 666 667 MT Eva Resh 700ヽrT RA Dry tske consequential rcfion er per Pollcy / Prccedures.

Case No.A‐457

Mrs Essen Srttd:●iltv F‖msI Pヽ "L Ltd. HQ F.No. 01/87/162/H4/AM17/DES‐ VⅡ Status: Approved NC No.:14/AM17 Dated: 20.022017 Adv Lic No 2410041893 dated 08.012016 RAF No 24/24/040ノ00036/AM16 ^

Case No.A‐458

Mrs腱鎗n spala::"日:msI Pvt.Ltd. HQ F.No. 01/87/162/115/AM17/DES‐ VⅡ Stattly Approved NC No.:14/ADE17 Dated: 20脱2017 Adv.Lic.No.2410041894 dated 08 01 2016 RA F.No 24/24/040/00034/AM16 subiect: Flxatlon of adhoc norms ln respect ot Myance Authorhatlon No, 241fiX1894 deted 08.01.2016 Decision: The Committee considered the case in the meeting and approved adhoc norms as follows: - Export item Oty IMPORTITEM Qty Eva placemats (Embossed/olain/orinted/laminated) 666667ヽFT Eva Resh 700M 「 RA mey take consequentid ection e! per Policy / Procedurtr.

Case No.A‐459

M′s Essen Spect:alltv Fiimsj Pvt.Ltd. HQ F.No. 01/87/162/93/AM17/DES‐ VII Statu" DeFered NC No.:14/AM17 Dated: 20.l122017 Adv Lic No 2410041995 datcd 17 06.2015 RAF No. 24/24/040/00006/AM17 SubleCt: F:xation of adhoc normsin respH■ of Advance Author12atiOn No.2411XM1995 dated 17.06.2015 Decision : The Committee considerpd the case as per agenda and decided to defer the case for want of information from the authorisation holder. Thus, the Committee decided to issue defioiency letter to the authorisation holder for submission ofthe following information. a) Technical descriptions/specifications, p€rcentsge composition (by weight) of the products to be exported. b) Detailed manufacturing process along wi0l technical justification for wastages claimed at each stage and each ofthe materials required in the manufacturing proc€ss. c) Chemical name, Technical specifications of items proposed to be imporrcd, especially C-9. d) Whether the scrap generated in the process is being reused or not. If not the t€chnical justification for its non-use may be fumished. If the scrap is being sold, the sale value/commercial value may be indicated. e) Material balance indicating calculative ststement of the requirement of oach of item for manufacture of each of export product. f) Complete Chemical r€actions with molecular and sfuctural formula and molecular weights a/tons - , with stage-wise oZ yields on molar basis. //' . / 82'*1

Case No.A‐460

階∬ en S"dallty Ⅲ ml IIQ Fo No. D1/87ノ162/95/AM17/DES‐VII Status Approved NC No。814rAM17 Dated8 20。02。2017 Adv.Lico No.2410041974 dated 26.05。2016 RA F.No。 24/24/040/00003/AM17 Subfe* Flxatlon of adhoc norms ln respect of Advance Authorlzatlon No. 2410041974 dated 26.05.2016 Decision: The Committee consideredthe case inthe meeting and approved adhoc nonns as follows: Export item Oty IMPORTITEM Oty Eva placemats (Embossed/olain/orinted/laminarcd) 666.667 MT Eva Resh 700 hrr RA may take consequential action es per Policy / Procedurrcs. SubleCt: Request of Mrs GRP Ltd.′ Mumba:for Re‐ consider approved Quantitv P:ants Wbe against Advance Authori2at10n No.0310754561 dated 21。 10。2013 Decおion8 ¶にCOnlmittee collsidered the case as per agenda and decided to call for dle mpOrt h∞nce■om the authoHsation hol“ rおrthe inputimm。 @aamcnonnsinrespectofAdvanceAuthorizationNo.0510398754 dt。09。06。2016 Decision: This case was discussed in NC meeting No-13/AMl7 datad 28130 December 2017. Committee considered the case and decided to approve the adhoc nonns as follows Import item-l -as applied Import itam-z- deleted, as no specffications were given However, due to tpographical error the status is shown as deferred in the said considered the case and approved amendments in minutes to r€ad status as approved. RA may take consequential action ar perPolicy/Prcccdunes. 16

Case Noe A‐461

MノS GRP Ltd.′ Mumbal HQ F.No. D1/87r050r00369ノAM14/DE'V‖ Statu鶴 DeFered NC No。814/AM17 Dnted: 20。02。2017 Advo Lic.No.0310754561 Dated8 21。10.2013 RA F.No. D3r94/mrm587ノAM14

Case Noo A‐462

M/s MOTHERSON SUMI SYSttMS LIMrrED HQ FoNo.01/87′5"387AM17/ DES‐VII Status: Approved NC No.814/AM17 Dated8 20.02。2017 Advo Lic.Noo and Date D510398754 dte 09。06.2016 RA Fo No。05r24r040700113rAM17 曹iこdじ詰y P鍮“ 1 lr掏ca蹟laVJ帥 1

ONLINE CASES No.:1/32/87‐ ALC12014 : The Committee considered the case and decided to refer to DIPP. No/Date:14/87‐ 1/2016 1.12.2016 10789415 18.09。2014 Name:POLYGENTA No/Date:14/87‐ Fllo :01ノ87/050/00373/AM15ノ The request of firm for fixation of adhoc nonns was examined. It was observed this is a Policy issue, the case has been referred toPc-z Section for seeking their 1造きな ｀ И /87‐ 囲辮“Ю ・筋 import ofpet bott_Ig scrap, 17 : The Committee considered the case as per agenda and decided issue deficiency letter authorisation holder for submission ofthe following information. Technical descriptionVspecifications, percentage composition (by weight) of the products to Detailed manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufacturing proc€ss. Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the for its non-use may be furnished. If the scrap is being sold, the sale Material balance indicating calculative statement ofthe requirement of each of ircm for : The Committee considered the case and decided to refer to DIPP. 肝

No.:9ノ42/87‐ALC12014 PartyName: MRC ICLEAII No/Date:14/87‐ PRIVATE /2016 1.12.2016 File File 10061249 1/87/050/00350/AM15/ :09/24/040/00439/AM15/ 17.11.2014 8 The COnlmittee considered the case and decided to refer to DIPP。 No.:21ノ18/87¨ALC1/201511P田サName:MRC ICLEAN No/Date:14/87‐ 1/2016 SYSTEMS PRIVATE ILIMITED : The Committee considered the case and decided to refer to DIPP. No.:29/18/87‐ALC12015 Name:CIKAUTX0 No/Date:14/87‐ PRIVATE LIMITED 1/2016 1.12.2016 ′ ic.No/Dat l.07.2015 110065522 8 h COnllnitte considered the case as per agenda and■oted that the export item ini and impo■item in kgs.Norms camot be rlxed.Thus,the Collm‖ 騰e decided to reieCt thel No.:35718/87‐AL(C12015 10041579 The Committee considered the case and decided to defer the case. Lic.No/Date:0910062005 :01/87/050/00191/AM16/ L9"`型凶堅2イ蝉lg 12.05。2015 No.:30718787…ALC1/2015 Name:MULTHECH No/Date:14/87‐ 12016 PRIVATE 鳥 1.12.2016 HQ File 110065581 ;p!le!rQs,or,o,o2ool/.J[{tt6t [,!!{t:ro+-Q{Qqf-ry,t4yt6l,lol,o-q:911 : The Committee considered the case as per egenda and decided issue deficiency letter ) Technical descriptionVspecifications, percentage composition (by weight) of the products to r) Detailed manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufacturing process. )ChemiCJ name,Technical specincatiOns ofitems proposed to be impottd。 1 )Whether the scmp generated h the process is being reused or not.If not the technical for its■on‐use may be m面shed.If“ scrap is behg solt the Sde value/commercidi may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for alanceindicatingcalculativestatementoftherequirementofeachofitemfor ofeach ofexportproduct. I ‖ 18 Status: Deferred Itrtus: Deferred

No.:20/20/87‐ALC1/2015 Nnme: GUJARAT No/Date:14ノ87¨ CHEMICALS LTD 1/2016 1.12.2016 File File 10041497 1/87/050/00264/AM16ノ 158/AM16/ authorisation holder for submission of the following inforrration. ,) Detailed manufacturing process along with t€chnicsl justification for wastages claimed at and each of the materials required in the manufacturing proc€ss. ) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. ) Material balance indicating calculative statement of the requirement of each of item for re ofeach ofexport product. No.:21/20/87‐ALC1/2015 Name:GUJARAT CHEMICALS LTD 1/87/050/00265/AM16/ 159/AM16/ : The Committee considered the caee as per agenda and decided issue deficiency letter T∝hnicd descHptions/speciicatio鵬 ,percentage compos■ion cby Weighty ofthe prOducts to bel | )Detailed manufacming process along with technicaljustiication for wastages claimed tt eacl File :LLoNo/Date3410041498 19 No.:38/18/87‐ A工JC1/2015 The Committee considered the case in the meeting and decided to appnove the AQUA COAT SR61 T― SLICON SILICON IN PRIMARY FORM¨ CONTADttNG 2126.70KGS OF SR61 CONCENTRATE AND 265.63 KGS OF XB 1823‐ADDITMH RA may take consequentiel action ar per Policy / Pnoccdures. | llllllllllllllll:|: No/Date:14/87‐

;) Chemical name, Technical specifications of items proposed to be imported. iustification for its non-use may be furnished. If the scrap is being sold, the sale may be indicated. of each of export product. No.:6/20/87… ALC1/2015 Name:WACKER No/Date:14/87‐ CHEMICALS 1/2016 1.12.2016 Flle 1/87/050/00250/AM16/ 120/AM16/ authorisation holder for submission of the following information. r) Detailed manufacturing process along with technical justification for wastages claimed at Whether the scrap generated in the pnocess is being reused or not. If not the technical may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of ircm for re ofeach ofexport product. Name:VEE KAY &CO LLP ALC1/2016 21.12.2016 И 3ase No.:2/18/87‐ALC172015 P田けName:POLYFLL 「ECHNOLOCIES PVT LTD 晩et No/Date:14/87… 吼C1/2016 21。12.2016 Status: rithdrewn IQ File 01ノ87/050/00172/AM16/ UンヽFile 3424/040/00170/AM16/ LicoNo/Date:3410041531 21.09。2015 Declsion: The Committee noted that the Advance Authorisation was issued on repeat basis on a valid dhoc norms. Thus, the Committee decided to withdraw the case. [5 ICase No.:1′ 11/87‐ALC1/2016 Status: Relectcd HQ Flle :01/87ノ050/00239/AM17/ RLA File 108/24/040/00159/AM16/ 1諸∬鰤ぽЮ 8101362鯰 Decision: Tho Committee considered the case as per agenda and noted that the export item ir ros and import item in kgs. Norms cannot be fixed. Thus, the Committee decided to reJect th€ )ase. 20

No.:26/14/87‐AL(C12016 Name:AG DERCO No/Date:14/87‐ ,TING(INDIA)PVr。 1/2016 LD。, :1.12.2016 File RLA File :05/23/040/00262/AM16/ 10395845 1/87/050/00359/AM17/ : The Committee considered the case and decided to refer to DIPP. Name:ASHLAND Meet No/Date:14/87‐ INDIA PRIVATE LIMITED :IALC1/2016 Pl.12.2∝6 File 1/87/050/00313/AM16/ The Committee considered the case in the meeting and after taking cue from nonns fixed earlier in case number 2427187-ALC,ll2007 in meeting no-11/87 ALCI/2008 dated 25.06.2008, approved rs applied for by the authorisation holder their Advanced Authorization. "p9y _ts_E 9919g-993gsl l$gg ar pgf No.:26/21/87‐ALC12015 Nagne:MPD No/Date:14/87‐ INDUSTRIES PVr.LD。, 1/2016 1.12.2016 RLA File 5610004738 :01/87/050/00308/AM16/ 1劇M16ノ .11.2015 : The Committee considered the case alr per agenda and decided issue deficiency letter authorisation holder for submission of tho following inforrration. ) Technical descriptions/specifications, percentage composition (by weight) of the products to ) Detailed manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufacnring process. ,) Chemical name, Technical specifications of items proposed to be imported. Whether the scmp generated in the process is being reused or not.If not the technical for its non‐use may be mished.rthe scrap is behg sold,the sde valuc/co― ercial may be indicated. File :Lお。 No/DateЮ 310799299 21 Status: Deferred 181 : The Committee considered the case and decided to refer to DIPP.

No.:14/1787‐ ALC12016 No.:16/1/87¨ ALC1/2016 Name:ACG No/Date:14/87‐ 1/2016 1.12.2016 HQ Flle :01/87/050/00370/AM16/ ACK PVT LTD File :03/94/040/00638/AM16/ No/Date:14/87‐ 1.12.2016 1.12.2015 10800535 Decision : The Committee considered the case as per agenda and decided issue deficiency letter b) Detailed manufacturing process along with technical justification for wastages claimed at Whether the scrap generated in the process is being reused or not. If not the technical for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for O ChemiCd name ofBarexresin and its technical chamteristics. P田けName: ¨ A■ONAL 30NVEYORS LIMITED Itetus: Deferred HQ File 101/87/050/00368/AM16ノ 巴A File 103/94/040/00623/AM16/ LicoNo/Date:0310800252 16。11.2015 21 itatus: Deferred File lLicoNo/Date:3110065777 1/83/040/00101/AM16/ 1101.12.2015 The Committee considered the case and decided to spprove on repeat brsis based on the d∝ision ofthe NC Meeting No.26/87‐ ALC1/2012 held on 26.09。2012 Trilaminate / PVDC Coated PVC Filtn with LDPE Lamination 2. PVDC Copolymer emulsion (solid content 3. PVDC Aqueous Dispersion (Solid content 4. PVC Aqueous Dispersion (Solid content 5. Coexmded鮨田血ndon mde LDPE Fihn take action a! Der Policv / Prccedures.

No.:3犠0ノ87‐AL(C12015 Name:QREX FLEX ATE LIMID No/Date:14/87‐ 1/2016 1.12.2016 Flle File 1/87/050/00278/AM16/ 52/24/040/00059/AM16ノ No.:35/14/87‐ALC1/2016 Name:VEE KAY No/Date:14/87‐ &CO LLP 1/2016 1.12.2016 File File 10136781 :01/87/050/00368/AM17/ AM16ノ iSiOn3 口にCOmmi歓)e considered the case as per agenda and noted that the exportitem and impo■item in kgso Noms camot be flxed.nus,the conlnlittee decided to reiect l No■ "2787‐ ALC12015 P¨ ′Nma VEILBllRGER lcoATrNGS (rNDrA) IPRIVATE LIMITED File 1/87/050/00338/AM16/ |ハ出饉16/ : The Committpe considered the case as per agenda and decided issue deficiency letterto Technical descriptions/specifications, percentage composition (by weight) of the products to whether the scrap generated in the process is being reused or not. If not the for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. ) Material balance indicating calculative statement of the requirement of each of ircm for f) Not indicated the specific chemical name of import produc! only brand name is given. Licnヾo/Date:5210041708 04.12.2015 The Committee considered the case and decided to approve on repeot basis (, orms) based on the decision of the NC Meeting No. l2l87-AlCll20l4 held on 18.06.2014 PVC¨ AD FLEX 1.100%POLYES'H】t WARP KNHttED FABRICS(RELEVANT CSM USED IN THE 4.NANO CALCIUM CARBONA電 5.DI‐∝町LPⅢmmTE QD take action 8r per Policy / Procedures. ‖ Mcet No/Date:14/87¨ 12.01.2016 23

No.:1lr22/87‐ALC1/2015 Name:ALSTONE No/Date:14/87‐ PⅥ LD 1/2016 1.12.2016 1310048095 ) Hailed manufacturing process along with technical justification for wastages claimed at ) Chemical nam€, Technical specifications of items proposed to be imported. for its non-use may be furnished.If the scrap is being sold, the sale may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for TINGS oDIA) ATE LIMITED File 10206448 17/AM15/ :114.01.2∝6 8 The COllmlitte considered the case as peragenda and decided issue denciency lettertol TechntJ descriptions/speciflcttions,percentage composition(by weighth ofale products to b0 )Detailed manufacming pr∝ess dong with technicaljustiflcation for wastages claimed tt eacl Whether the scrap generated in the process is being reused or not,If■ otぬe mchnical for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. Not indicated the specific chemical name of import product only brand name is given. N∝1脇2月■ALCttm51榊 聰 sl No/Date:14/87‐ 1/2016 1。12.2016 icoNo/Date:3110065872 File ;7/050/00351/AM16/ 1/83/040/00150/AM16ノ 15.01.2016 ‐ `1 No.:4″2/87‐ALC12015 :01/87/050/00337/AM16/ 1つTeChnicd desc五ptions/speciflcttions,percentage∞mposition cby Weiま0 0fthe products to

,) Detailed manufacturing process along with technical justification for wastages claimed at each Whether the scrap generated in the process is being reused or not. If not the technical for its non-use may be ftrnished. If the scrap is being sold, the sale value/commercial ue may be indicated. No/Date:14/87‐ 1/2016 1.12.2016 File 1/87/050/00057/AM17/ 8 The CO―itte consideredthe case as per agenda and decided issue deiciency lettrtol authorisation holder for submission of the following infonnation. )TeChnical descHptions/specincations,percentage composuon cby weightp ofthe products to bl )Detailed manufacming process Jong with tchnimljustiflcation for wastages daimed tt e"Ц for its non-use may be furnished.If the scrap is being sol( the sale value/commercial may be indicated. No.:3/3/87‐ ALClr2016 Nnme:POLYCAB No/Date:14/87‐ PVT.LTD. 1/2016 1。12.2016 File RLA File :03/95/040/00612/AM16′ 10802043 1/87/050/00056/AM17/ 。01.2016 ADIL dated2l.09.20l6 was issued by DIPP to authorisation holder. Reply still awaircd hnl the authorisation holder.The comnlittee decided to issue last rerninder to audlorisation l_l days timg_ for gbm_ission of thc following information. Name:GARIB NAWAZ LicoNo/Date:0310801858 18.01。2016 25 AD/L No。 7/121/2016‐ TSW datd 02.05。2016 was issued by DIPP holder. This was followed by Reminder from DGFT on 25.10.2016 giving 15 for submission ofinfomationo lt was observed■at the audloHsatton holder failed to despite of repeated reminders to them, hence the Committee decided to rcject

1/87/050/00333/AM16/ 10802749 No.:51/21787‐ALC1/2015 Name: KARITR ヽPACKKAGINGS IRLARb INo/Date:14/87‐ 1/2016 l1211121291, ]謬器?01ηЫ 6 2/24ノ040/0110036/AM16/ Name:DALMIA POLYPRO INDS.LTD. File :01ノ87/050/00127/AM17ノ The request of firm for fixation of adhoc norms was examined. It was observed this is a Policy issue, the case has been referred to PC-2 Section for seeking their ing import of pet bottle scrap. No.:49ん2787¨ALC12016 File 1/87/050/00051/AM17/ ision: The Committee considered the case as per agenda and noted that the export item and import itom in Sq. meter. Norms cannot be fxed. Thus, the Committee decided to rcjr No/Date:14/87‐ ic.No/Date:3110066027 ⌒ 32 Strtus: lhferred Decision : The Committee considered the case as per agenda and decided issue deficiency letter to fie authorisation holder for submission of the following information. t) Technical descriptionVspecifications, percentage composition (by weight) of the products to be lxported. l) Detailed manufacturing process along with technical justification for wastages claimed at each $age and each of the materials required in the manufacturing process. :) Chemical name, Technical specifications of items proposed to be imported. l) Whether the scrap generated in the process is being reused or not. If not the technical ustification for its non-use may be fumished. If the scrap is being sold, the sale value/commercial rralue may be indicated. :) Material balance indicating calculative statement of the requirement of each of item for nanufacture of each of export product. 34 Pa●Name:PIINE METAGRAPH Status: RtteCted lLA File 31/83/040/00159/AM16/ Name:EXPANDED 駆 R SYSTEMS PVT. : The Committee considered the case as pcr agenda and decided issue deficiency letter Detailed manufacturing process along with technical justification for wastages claimed at 26

r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical ustification for its non-use may be furnished. If the scrap is being sol4 the sale may be indicated. r) Material balance indicating calculative statement ofthe requirement of each of item for No.:402/87‐ALC12016 Ns、KLJ POLYMERS ilMeetNo/Date:14/87‐ CHEMICALS LD IIALC12016 1.12.2016 File 1/87/050/00042/AM17/ authorisation holder for submission of the following inforrration. )Detanled manufacming prOcess along with technicaljustiflcation for wastages claimed tt eachi and each of the materials required in the manufacturing prooess. ) chemical name, Technical specifications of items proposed to be imported. ification for its non-use may be furnished. If the scrap is being sold, the sale value/commercial maybe indicated. Material balance indicating calculative statement of the requirement of each of ircm for What is specific name of compound. No.:44/8/87‐ ALC12016 File lru,l rite No/Date:0510397922 :01/87/050/00t56tANn'lt l:05t23/040t00516/AMl6/ lta.o:.zoto cision: Ihe Committee considered the case as per agenda and discussed the requesi of the fi ise the adhoc-norms. Accordingly, following adhoc nonns are approved in supersession of earl ratified in NC Meeting No. l2lAMl7 held on l7.l1.2016(Casc No. #rtltri-AL0tt20t6)r Meet No/Date:14/87‐ /2016 EXPORT「EM QTY IMPORT「EM QTY INSllLATED PIPE SEALS OF VARIOUS SIZES CWmG:HOT MELT SE´」LANtt「STTIP (Width=33 nlm 1/‐ 311m and Thiclmess=1.411m十ノ‐0.2 nlm) 85714 rneter Hot Melt Sealant Strip with Silicon Release Paper (Width = 33 mm +/- 3 mm and Thickness = 1.4 mm +/- 0.2 mm) 86571 meter A reparate letter ftom EQr may be wrltten to RA rcgeding the change of noru$ RA may take consequentid action ar per Policy / Prccedure* 27 ofeach of 37 P蟹りNnme:FЮNTIER ECHNOLOGIES PVT LTD Status: Approved 讀 Ｆ ｎ ｏ ｍ ・ ｌ ｅ ｒ Udyog Bhabvan,New Delhi-11

No.:6/1/87‐ ALC12016 Name:VISEN ISlllコES LIMITED No/Date:14/87‐ File 1/87/050/00359/AM16/ lAM16/ 115.03.2016 : The Committee considered the case and decided to refer to DIPP. No.:2710r87‐ ALC172016 Name:AllM UDYOG No/Date:14/87¨ 1/2016 1.12.2016 File ,No/Date:2210015446 1/87ノ050/00224/AM17/ 124/AM16/ : The Committee considerpd the case in the meeting and approved ar epplied for by authorisation holder in their Advanced Authorization. ElygE-c9nseqg9-n$l.!J-ti9!.er.p9f -p,'q!icy1PIgg{lEH: Name:KLJPOLYMERSi CIIEMICALS LTD i The CoIIImittee conside"d the case in the meethg and d∞ided to approve the ndLol as follows: No.312ノ10r87‐ALC12016 Name:SHRIRAM No/Date:14/87‐ PRIVATE LIMIm 1/2016 1.12.2016 1310048180 : The Committee considered the case in the meeting and approved er epplied for by authorisation holder in their Advanced Authorization. may take consequentiel action rr per Policy / Prccedures. 〕 lhi‐ 14

Case No.:45/8/87‐ ALC120161

鵬脇5的∝ "/AMヮ : EXPORT「 EM QTY IMPORT「EM QTY MEDIIM DENSITY POLYETHYLENE COMPOllND 1,00,000 kg 1.LINEAR LOW DENSITY POLYETHVLENE 62600 kgs 2.HIGH DENS1lY POLYETHYLENE 38720 kgs 3.ANTIOXDANT Deleted RA may take consequentlal action ss per Policy / Pmcedures. 珈 ¨ Status: Approved ｄ ｅ 鶴 　 Ｏ Ｖ 珈 枷 3掲,wη御″ |じ殿叩岬叩ψ thc

No.:3/10/87‐ ALC1/2016 Nnme:INDUS¶ 田AL No/Date:14ノ87‐ PVT LTD 1/2016 1.12.2016 File 10398104 /050/00230/AM17/ 1劇M16/ 1.03.2016 ) Technical descriptions/specifications, percentage composition (by weight) of the products to ,) Detailed manufacturing process along with technical justification for wastages claimed at r) Chemical name, Technical specifications of items pnrposed to be imporrcd. Whether the scrap generated in the process is being reused or not. If not the technical ustification for its non-use may be fumished.If the scrap is being sold, the sale may be indicated. No。814rl1787‐ALC12016 Name:Do R COATSINK No/Date:14/87¨ RESINS PVT.LD。 1/2016 1.12.2016 10803792 1084/AM16/ 8■e COllmittee considered the case as peragenda and decided issue deflciency lettrtol r) Detailed manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufachring process. r) chemical name, Technical specifications of items proposed to be imported. ustification for its non-use may be furnished. If the scrap is being sold, the sale may be indicated. ,) Material balance indicating calculative statement of the requirement of each of item for File 29 陛 igion: The Committee considered the case as per agenda and noted that the export item and import item in kgs. Norms cannot be fixed. Thus, the Committee decided to rcject 1 〕htus: Dererred HQ File :01/87/050/00252/AM17/

No.:57r8/87‐ ALC12016 No/Date:14/87‐ 1/2016 1.12.2016 8 The COnmi“ e considered the case as per agenda and d∝ided issue deflcbncy letter ) Technical descriptions/specifications, percentage composition (by weight) of the products to lue may be indicated. manufacture of each of export product. No.:32/8/87‐ ALC12016 Nnme:MACCAFERRI No/Date:14/87‐ AL 1/2016 PVTLD 1.12.2016 File File No/Date:0310803860 :01/87/050/00144/AM17/ 1劇M16/ 11.04.2016 r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or noto r not」 詭techniml for its■o■‐uSe may be mmished.rtt scrap is being sold,the sale value/commercial may be indicated. ) Material balance indicating oalculative statement of the requirement of each of item for No.:50/8/87‐ ALC1/2016 Name:SDDHI DECOR ヽLTD。 File 1/87/050/00162/AM17ノ 陸 lPartyName: SLJRAT Lお。 No/Date5210041857 1造ぎ鍛鸞は 1″87¨ Status: Dererred 「IQ File 101/87ノ050/00169/AM17/ RLA File 15第4/040/00080/AM16/ : A copy ofapplication has been forwarded to DIPP.Comments still awaited。

Case No.:19/9/87‐ ALCl′2016

HQ File :01/87/050/00194/AM17/ P錮りNnme:KLJPOLYMERS &CHEMICALS LD RLA File :05/23/040/00033/AM17/ Meet No/Date:14/87¨ ALC1/2016 21.12.2016 LicoNo/Date:0510398380 04.05.2016 欄 Decision: The Committee considered the oase in the meeting and decided to epprove the edhoc nonns based on decision taken in previous meeting as under: EXPORT ITEM QTY IMPORTITEM QTY )0PE Compound containing minimum 97.85% LLDPE 5,00,000.000 Ⅲ 1.LINEAR LOW DENSITY POLⅥ]T田化DE cLDPEp GRANULES 4,99,350 kg 2.SコLANE 7,000 kg 3.DI CtIMYL PEROXIDE KDCP) 400 kg RA may take consequential action as per Policy / Prncedures. No.31774r87¨ ALC1/2016 Name:VEE KAY No/Date:14/87‐ &CO LLP 1/2016 1.12.2016 File File 1/87ノ050/00073/AM17/ :08/24/040/00042/AM17/ MOtt ne cOnllnime cmdd“ d血ec"田p agenda and note:翼庶麗鶴蹴 | and impo■item m kgso Noms cannot be fEXed.Thus,the C( No.35178/87‐ ALCl′2016 Name:SIDDHIDECOR I No/Date:14/87‐ :LTD. 16 鵬島鷺 5∽∝“ /AMW : A copy of application has been forwarded to DIPP. comments still awaited. No.337ノ14/87‐ALC12016 Name:NAVRATAN No/Date:14/87¨ ,TY CHEMICALS 1/2016 1.12.2016 8 ne COllmime cOnsidered the case as per agenda and decided issue deiciency lettrtol authorisation holder for submission of the following infonnation. ) Technical descriptions/specifications, percentage composition (by weight) of the products to b) Detaild manufacturing process along with technical justification for wastages claimed at and each ofthe materials required in the manufacturing process. r) chemical name, Technical specifications of items proposed to be imporrcd. ion for its■o■‐use may be価面shed.rthe scmp is being sold,the sale value/co― erciaI 早 /AM口 1躙辮 may be indicated. 引htus: Dererred

ヘ r) Material balance indicating calculative statement of the requirement of each of item for f) A piece No.:41/9787‐ ALClr2016 Nnme:SHIVA No/Date:14/87‐ 1/2016 1.12.2016 10042243 106.2016 No.:43/8/87¨ ALC12016 Name:MARUTI No/Date:14/87‐ RUBBER PVT.LTD.: 1/2016 1.12.2016 icoNo/Date:0510398745 06/AM17/ :01/87/050/00216/AM17/ 32 Itatus: Deferred 田レヽFile 134/24/040/00032/AM17ノ Decision : The Committee considered the case as per agenda and decided issue deficiency letter to lhe authorisation holder for submission of the following information. t) Technical descriptionVspecifications, percentage composition (by weight) of the products to be :xported. b) Detailed manufacturing process along with technical justification for wastages claimed at each ilage and each of the materials required in the manufacturing process. :) Chemical name, Technical specifications of items proposed to be imported. l) Whether the scrap generated in the process is being reused or not. If not the technical ustification for its non-use may be furnished. If the scrap is being sold, the sale value/commercial ralue may be indicated. :) Material balance indicating calculative statement of the requirement of each of item for nanufacture of each of export product. ) You have not indicated the deails of indigenous material. 8AD/L No.7/121/2016‐ TSW dated 21.09。2016 and 21.10。2016creminderp was DIPP to frmo Reply still awaitedo nus,血 conlmi“ e decided to issue last reminder to giving 15 days time for submission of the following information. Manufachring proc€ss of Nitile Rubber Pads, indicating the o<act wastage generated at te of manufacture. Production of the proposed ircm of export vis-a-vis the consumption of raw material rorted & indigenous, during the la* three years, duly certified by a Chartered Accountant. End Use ofthe item prOposed for export may also be indicated

No.:17/9/87‐ ALC12016 Name:LOPAREX INDIA: A‐ LIMITED i No/Date:14/87¨ 1/2016 1。12.2016 障 t描叩岬叩7「 1/87/050/001921AM17ノ ll:03/95/040/00210/AM17/ :114,06.2016 Based on the writn∞nllnents mmished by the DIPP vide theb lemr No。 7/355/20161 W dai€d 06.L2.2016,the Committee appnoved following adhoc nonns: EXPORT「 EM QTY IMPORT「EM QIY recommended for Kg of erport product Silicone Coated Polyester Fihn celease Liners) (100 miCrOn畦 … 10%) 50,000.O Kg, 357000.0 sqm ０ ，０ ０ 町 ５

1. Polyester Fih (100 micЮns± 10%)52500.0 Kg 374850.O sqm 1.05 kg
2. Silicone Polymers 0.0090 kg
3. Catalyst for Silicone 0。0006 kg 4.CЮss Linkers for Silicone 0.00108 kg RA may take consequentiel action as per Policy / Prccedurcs. No。829/9787‐ 1ノ2016 ||: 鵬跳 5pЮ0294岬7雁危枷 122/AM17/ feet No/Date:14/87‐ 1 工C1/2016 1 1.12.2016 : Lic.No/Date:0510398843 17.06。2016 ln: The Committee considered the case in the meeting and decided to approve the ad and recommended as under: EXPORT ITEM QTY IMPORT ITEM QTY Export products Sl.Nos.1‐ 7 As applied 1.POLYPROPYLENE RESIN:DOW C702‐20 NA呻 1.05kag content h export item. 2.IIINGE DAMPER Netto Net RA may take consequential actlon as per Policy / procedures. ln: The Commitrce considered the case as per agenda and decided to call for the copy licence from the authorisation holder for scrao.

No.:30r9r87‐ ALCl′2016 Name:MO… RSON No/Date:14/87‐ SYSTttMS LIMID 1/2016 1.12.2016 The Committee considered the case as per agenda and noted that the export item and import item in kgs. Norms cannot be fxed. Thus, the Committee decided to reject No.:5/9/87‐ ALC1/2016 Name:SRF LIMITED File 1/87/050/00180/AM17/ : The authorisation holder has not indicated the speoific chemical name of No.:42/9r87‐ ALC12016 Name:VISION No/Date:14/87‐ 1/2016 1.12.2016 No.347r9/87‐ ALC1/2016 Name:VEE KAY No/Date:14/87‐ &CO LLP 1/2016 1.12.2016 108/AM17/ ision: The Committee oonsidered the case as per agenda and noted that the export iteln and import item in kgs. Norms cannot be fxed. Thus, the Committee decided to reJect I 1/2016 No■710787ALC12016 P噛′Nama SRF LIMIm ‖Meet No/Date:14/87… lStam鶴 I J I粗T PTd IHO File 知17 1器辮Ю 4m位“ 9 冊跳,oЮη"岬17 脇馳∽0"9岬17 1冨鼎α∵ m6:T91 petisi9n 3 Th9authOI響10n loHer hおn∝Ⅲ dbated tte Specnc chemたd nalne of expo“ bPolctotty11響d■aln,iS given the“ fo",committee decided to reieCt the case. ‐ 1/87/050/00217/AM17/ The committee considered the case and decided to rpprove on repeat baris 1. )baSed On dle d∝ision ofthe NC Meeting No.6/87‐ ALC1/2013 held on 08.05.2013 Attd Resin VLK‐ 3580(800/0 resin contentp RA may take consequential action as per Policy / proccdures. 57 〕tatus: Rejected 冊3‰叩照 9,製17 RLA File Lic.No/Date:0510398842 17.06.2016 brand name is given therefore, committee decided to reject the case. IQ File l 01ノ87/050/00222/AM17ノ 1堀孵Юam捌7 躙壁断譲瓢恥ご 。 饂燈欄麟郡靴デ

1/87/050/00360/AM17/ No.327′ 14/87‐ALC1/2016 ipl.12.2016 : The Committee considered the case and decided to refer to DIPP. No.:31/9/87‐ ALC12016 No/Date:14/87‐ File icoNo/Date:0510398992 1/87/050/00206/AM17/ 8■Ю COInmitt cOnsidered the case and decided to referto DIPP. No.:53/14/87‐ALC1/2016 Name:NIKHIL No/Date:14/87‐ LD。 12016 1.12.2016 ) chemical name, Technical specifications of items proposcd to be imported. for its non-use may be firnished. If the scrap is being sol4 the sale value/commercial may be indicated. ) Msterial balance indicating calculative statement ofthe requirement of each of item for 1/87/050/00199/AM17/ 35 P田けName:KLJPOLYMERS tND CHEMICALS LD Stetus: Dcferred File IHQ RLA File LicoNo/Date:0510398908 24.06.2016 No.:24r9/87‐ ALClr2016 The Committee considered the case in the meeting and decided to epprove the )(LPE Compound containing minimum 97.85% LLDPE 1.LINEAR LOW DENSITY POLYETHYLENE cH)PE) GRANULES take oction rs Der Policv / Procedures. ‐ 影 =,.Uじ y。¬ぉ11」γκ3爆ル1ィ:二 '1｀ し 端靴憾蠍「

:lel∝・ T71:α劇“ 1翼増∬ L警Wギ 1夢滞 :Il「 1警lず 棚 泥 "Ю"“ /AM爾 陽念馳 OЮ∞ “ /AMW I悧 辮 Ю "“ “ %9「 ~ DecLion3 The COmEllitte considered the case h tte meeting and decided to approve the ndhocl norms and recommended as under: EXPORT ITEM QTY IMPORT「EM QTY )(LPE Compound containing minimum 98% LLDPE l MT 1.LLDPE Cranules 0。9994 Rrr 2. Tri Methory Vinyl Silane 0.014 Ⅳrr 3. Di-Cumylperoxide @CP) 0.0008 MT 4. Antioxidant 0.0008 MT 5. Octagon Jumbo Sleeves/Box As per packing policy RA may tske consequential action as per Pollcy / prccedures. No.:4/14/87… ALC12016 Name:HIGHPOINT No/Date:14/87‐ 1泡016 1.12.2016 :lsion : The Committee considered the case as per agendr an r) Detailed manufacturing process along with technical justification for wastages claimed at and each of the matprials required in the manufacturing process. ) chemical name, Technical specifications of items proposed to be imported. for its non-rne may be furnished. If the scrap is being sold, the sale may be indicated. nanufacture of each of export product. 36

Ｆ ト ト ト TT.:141lA:if∵[ 警T絆席:ギ11 器脇5∽ "“/AM17 鵬危監∽鯰∝ /AM″ 10399158 .2016 ト Decision: The Committee considercd the case in the meeting and decided to epprcve the edhoc norms with 3% wastage as under: EXPORT ITEM QTY IMPORT「EM QTY METALISED POLYPROPYLENE FLM/CAST POLYPROPYLENE FILM 550.000 … POLYPROPYLENE GRANULES 566.500hぽr RA may take consequentirrl action ss por Policy / Procodures. No.:31ノ14/87‐ALC12016.IPanyName:KANODIA No/Date:14/87‐ | IT:T::ザ1:TT: 1針 =郷 ピ 邪 掲5叩 "“ 押7 陽職 9ん磐9卿7 ‖ 悧辮 Ю ・ ""r7 Decmion3 The COmlnittee considered the case in the meeting and decided to npprove the ndhoci norms witdn3% wastage as under: EXPORT ITEM QTY IMPORT ITEM QTY CPP PLAIN FLNCPP MILKY FILM(OF POLY PROPYLENE) 250.00 hrr POLYPROPYLENE GRANULES 《]RADE RD368CF/RD265CF) 257.500 MT RA may mk cOnsequendd ac■ o■■s per PttcyノPЮcdure銑 | No.:29/14/87‐ALC172016 Name:BAGLA ‖ RLA File :01/87/050/00362/AM17/ ‖ :03/2j/040r00184/AM17/ INo/Date:14/87‐ 12016 1.12.2016 The committee considered the case in the meeting and decided to epprcve thC POLYOLEFIN SHRINK FILM (COntaining POlyethylene
― 1,40,000聰s and PrOpylene RA may take action ar pcr Policy / Procedures. 珈 ¨ 一

178/AM17ノ No.:34/14r87‐ALC12016 NametSPERRY PLAST Meet No/Date:14/87¨ IALC1/2016 121.12.2016 authorisation holder for submission of the following information: items in Export & Import may be obtained iレom the flm. No.:46/14/87¨ALC1/2016 Name:RAVЛ KHODA SONS No/Date:14/87‐ /2016 HQ File 1.12.2016 10042030 :01/87/050/00379/AM17/ じtiOn 3■eCOmmiteconsideredthecaseasperagendaanddecided issuedenciencylettrtol au■orisation holder for submission ofthe fbllowlng infomation. : Specific items in Export & Import may be obtained from the firm. No.:54r14/87‐ALC12016 Name:ACNIFIBER No/Date:14/87‐ PVToLD, 1/2016 1.12.2016 and each ofthe materials required in the manufacturing prooess. ) chemical narne, Technical specifications of items proposed to be imported. may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for :24/24/040/00011/AM17/ ofeach ofexport product. : The Committee considered the case as per agenda and decided issuo deficiency letter authorisation holder for submission of the following information: Specific items in Export & Import may be obained from the authorisation holder. Itatus: Deferred : The Committee considered the case as per agenda and decided issue deficienoy letter

No.:50ノ14/87‐ALCl′2016 Name:FPIINDUSTRIES‖ Meet No/Date:14/87‐ ATE LIMI‐D IALC1/2016 Pll17,2910 File lr87/050/00383/AM17ノ 1/83/040/00054/AM17/ The Commitrce considered the case as per agenda and noted that the export item and import ircm in kgs. Norrrs cannot be fxed. Thus, the Committee decided to neJect No.:20/14/87‐ALC12016 File :01/87/050/00353/AM17/ The Committee considered the case in the meeting and approved as epplied for by authorisation holder in their Advanced Authorization with nil wastage. No.:55/14r87‐ALCl′2016 Name:GUJARAT No/Date:14/87¨ CHEMICALS LTD 1/2016 1.12.2016 File 34/24/040/00129/AM17/ No.342/14/87‐ALC12016 Name:SHRIRAM No/Date:14/87‐ PRIVATE LIMITED 1/2016 1.12.2016 File File 1310048324 1/87/050/00375/AM17ノ 1324/040/00014/AM17/ : The Committee considered the case as per agenda and decided issue deficiency letrcr Detailed manufacturing process along with technical justification for wastages claimed at :ILic.No/Date:3110066272 iにお。 No/Date:3410042396 lp2198.2011 76 P田けName:KKALPANA NDUSTRIES cNDIAl LM助 , 陥et No/Date:14/87‐ 岨JC12016 21。12.2016 Status: lpproved RLA File :03/94/040/00343/AM17ノ じiclヾo月Date:0310806754 )1.08.2016 :ision : The Committee considerpd the case as per agcnda and decided issue deficiency letter Detaild manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufacturing proc€ss. chemical name, Teshnical specifications of items proposed to be imported. for its non-us€ may be furnished. Uthe scrap is being sold, the sale Material balance indicating calculative statement ofthe requirement of each of item for rnufacture of each of exoort oncduct. ヽ Minis,I「スJ7■r]It「Чqo0 1:じ、 :: 魃 ,3

ヘ r) Chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being rpused or not. If not the ification for its non-use may be furnished. If the scrap is being sold, the sale value may be indicated. ) Material balance indicating calculative statement of the requirement of each of ircm for Speciff the chemical name of export product. No.321ノ14/87¨ALCl′2016 Name:POLIGOF‐ No/Date:14/87‐ HYGIENE INDIA ATE LIMI‐ D 1.12.2016 ,No/Date:0310806861 ) Technical descriptions/specifications, percentage composition (by weight) of the products to chemical narne, Technical specifications of items proposcd to be imported. Whettrer the scrap generated in the process is being reused or not. If not the may be indicated。 ) Material balance indicating calculative statement of tho roquirement of each of item for Specttthe chemical name ofimpo■item No。1. what is'm' stands forthe description of input item-2 ie, mLLDpE. File 40 3ase No.:43′ 14/87‐ALC172016 Pttw Nnme:SIIRIRAM 配涸鵬LL PRIVA‐ LIMIm ド滞I Status: Deferred HQ Flle 101/87/050/00376/AM17/ RLA File :1324/040/00015/AM17ノ LicoNo/Date:1310048325 )3.08。2016 Decision : The Commitiee considered the case as per agenda and decided issue deficiency letter to lhe authorisation holder for submission of the following information. r) Technical descriptions/specifications, percentage composition (by weight) of the products to be "'xported. b) Detailed manufacturing process along with technical justification for wastages claimed at each ilage and each of the materials required in the manufacturing process. :) chemical name, Technical specifications of items proposed to be imported. l) Whether the scrap generated in the process is being reused or not. If not the technical iustification for its non-use may be furnished. If the soap is being sold, the sale value/commercial ralue may be indicated. l) Material balance indicating calculative statement of the requirement of each of item for nanufacture of each of export product. ) Specifu the chemical name of export product.

No.:58r14/87‐ALC12016 PRIVA霊 1710006426 The Committee considered the case in the meeting and approved ar epplled for by authorisation holder in their Advanced Authorization based on chemical reaction ci with molecular weight for the raw material and export product with2% wastage. may take consequential action es per Policy / Pnocedurcs. No.:54/8/87‐ ALC12016 Nnme:SHORE AUTO l No/Date:14/87‐ EXPORTS PVT.LTD: 1/2016 1.12.2016 File Fllo ,No/Date:3110066280 1/87/050/00166/AM17/ :31/83/040/00021/AM17/ .08.2016 No.:51ノ14/87‐ALC12016 Name:ENVITECH No/Date:14/87‐ SPECIALITIES 1/2016 1.12.2016 ision : The authorisation holder has not indicated the Chemical name of export bland qgg,re i9 gi,ven th9 committee decided to rcfect the case. No.322714/87‐ALC1/2016 Name:NARENDRA ITIC PWT LTD。 〔eet No/Date:14/87‐ LC1/2016 1。12.2016 File File Ю50/00355/AM17/ 卜03わ5/040/00373/AM17′ 蹟ざ孵ギリΨll ln: The Committee considered the case in the meeting and decided to ryprovc the as under: EXPORT ITEM QTY IMPORT 「 EM QTY PRINTED VEST TYPE CARRIER BAGS MADE OF HDPE 5000 MT I口〕PE Granules 5450hぽr RA may take consequential ectign ar per Pollcy / procodures. ⌒ B2 Status: Deferred Decision : A D/L No.7lll6D0l4-TSW dated 21.09.2016 and 21.10.2016(reminder) was issued by DIPP to firm. Reply still awaited. Thus, the Commitee decided to issue lart neminder to the Frm giving 15 days time for submission of the following information. t) Manufacturing process of Silicon Rubber Hoses, indicating the exact wastage generated at each ilage of manufacture. b) Production of the proposed item of export vis-a-vis the consumption of raw material both tmported & indigenous, dtring the la.* three years, duly certified by a Chartered Accountant The tti-titf of different grades of Silicon rubber in the manufacture of Rubber Hoses may also be mdicated. ト

No.:52ノ14/87‐ALC12016 Name:ENVITECH No/Date:14/87¨ SPECIALITIES 1泡016 1.12.2016 厩跳5的"o5/AMW File .No/Date:3110066283 1/83/040/00057/AM17/ 16 ision : The authorisation holder haq not indicated the Chemisal name of export brand name is given therefore, committee decided to neJect the case. No.:3/14/87‐ ALC12016 Name:MEGAPIX No/Date:14/87‐ 1/2016 1。12.2016 ,No/Date:0210206881 10.08.2016 SiOn3 The COIImiuDe cOnsidered the case as per agenda and noted thatthe export and importl are sameo Nomls camot be■Юd.Thus,dleCollmittdecidel"rej,■ the case。 | No.318/14/87‐ALC12016 Name:KKALPANA ①DIA) authorisation holder in theL Advanced Authorization with nil wange. 平ay● “ "甲 eq191中1,Ⅲ91甲per Pouw′ PrOCedures. No.31′ 14/87‐ALC12016 Name:PORUS No/Date:14/87‐ TORIES PVT LTD 1/2016 1。12.2016 8■e COnlm品e considered the case“ per agenda md deci“ dおsue dendency lemr● PRIVA‐ Technical descriptions/specifications, percentage composition (by weight) of the products to be ) Detailed manufacturing process along with technical justification for wastages olaimed at and each ofthe materials required in the manufacturing process. ) chemical narne, Technical specifications of items proposed to be imported. for its non-use may be furnished.If the scrap is being sold, the sale value/commercial may be indicated. r) Material balance indicating calculative statement of the requirement of each of item for nanufacfure of each of export product. 42 The committee considered the case in the meeting and approved es eppueo ror uy ~・・‐ ",`、tty Do綺たィf

No.:9/14r87‐ ALC12016 Nnme:KKALPANA ①DIA) File :03/94/040/00399/AM17/ 12.08.2016 No.:23/14/87‐ALCl′2016 10807118 器 』GROWINDhi器 淵 は1鵜 ・ No/Date:14/87¨ 16 1.12.2016 Pl・2・2911 File 10807095 56/AM17/ 12.08.2016 : The Committee considered the case &s per agenda and decided issue deficiency letter t) Detailed manufacturing prccess along with technical justification for wastages claimed * and each of the materials re,quired in the manufacturing process. ) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical may be indicated. export item given in alternatives. Party to speciS specific export item. No.336/14787‐ALCl′2016 Name:VEE KAY No/Date:14/87‐ &CO LLP 12016 1.12.2016 10138480 AM17/ 12.08.2016 and import item in kgs. Norms cannot be fxed. Thus, the Committee decided to rcJect t File File Fllo Technical descriptions/specifications, perc€ntage composition (by weight) of the products to Deailed manufacturing process along with technical justification for wastages claimed at and each of the materials required in the manufachring process. Chemical name, Technical specifications of items proposed to be imported. for its non-use may be furnished. If the scrap is being sol4 the sale lvlaterial balance indicating calculative statement of the requirement of each of item for rnufacture of each of exmrt oroduct.

File File 10138481 :01/87/050/00371/AM17ノ 109/AM17/ 12.08.2016 The Committee considered the case as per agenda and noted th* the export item and import item in kgs. Norms cannot be fxed. Thus, the Committee decided to reject No.38714/87‐ ALC12016 Nnme:KKALPANA No/Date:14/87‐ cNDIAp 1/2016 1.12.2016 Flle File .No/Date:0310807147 1/87/050/00341/AM17/ AM17/ :lll:“291, authorisation holder for submission ofthe following information: Tchnical descHptionyspeciflcatiolls,peuntage∞mpos■ion cbyWeightl ofthe prOducts to bo )Detaild manufacmingprOcess dongwithtchnicaljustiflcation forwastages claimed tt eachi ) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the proc€ss is being reused or not. If not the technical ustification for its non-use may be fumished.If the scrap is being sol4 the sale may be indicated. r) Ivlaterial balance indicating calculative statement of the requirement of each of item for 1/2016 1.12.2016 LicoNo/Date:3010103816 i下IIiドfT:111:1警 器 3月50Ю"a畑爾 厩 Name:BLS POLYMERS 停滞|■ 1にた。 No/Date:05103994 File Ecision: The Committee considered rms and recommended as under: 1哩1"イ型rlZ__:111“ 妥21,_____―― the case in dle meeting and decided to app 80 I I I "rr. th. "dh". EXPORT「EM QTY IMPORT「EM QTY UV Stabilizer Mamr Batch ⑩Ontaining■ol less than 20%UV StabilL“ っ 8000 kg l. Polypropylene 6376.7 kg 2.U.Vo StabilL“ r 1600 kg 3. Antioxidant 23.30 kg RA may take consequential ection ar pcrPolicy/prcccdurrcs.

Case No.:38/14/87‐ ALC12016 附lW

Mbet No/Date:14/87‐ 吐C1/2016 21.12.2016 itatus: Rejected itatus: Deferred 8■le COntmittDe COnSidered the case and decided to refer to DPP。

No.:44r14/87‐ALC172016 Name: MAX No/Date:14/87‐ FLMS 1/2016 1.12.2016 File File ,No/Date:2210015542 1/87/050/00377/AM17ノ 1/AM17/ 17.08。2016 T∝hnbd desc五ptionyspeciflcations,percentage composHon(by wei」 0 0fthe productsto b0 )Detailed manufacming process along with tchnicaljustiflcation for wastages claimed tt eachi and each of the materials required in the manufactrning process. ion for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. No.:47/14/87‐ALC12016 Name:SNR T10NS PVT.LTD; /2016 :1.12.2016 File RLA File 1/87/050/00380/AM17/ Ю1/87/050/00380/AM17/ 1,0/2ダリγ99りβ/AM17/ The request of firm for fixation of adhoc noms was examinea. r was observed this is a Policy issue, the case has been referred to PC-2 Section for seeking their ing import of scrap pollcy. No.:57/14/87‐ALC12016 Nnme:SML FILMS No/Date:14/87‐ ‖ ALC1/2016 1,12.2016 sion : The Committee considered the case as per agenda. Committee decided to defer to examine the request of the firm. No/Date:14/87‐ 1/2016 1。12.2016 File .No/Date:0310807191 1/87/050/00343/AM17ノ AM17/ 8 The CO― i■ee considered the case as per agenda and decided issue deflciency leuer ) Technical descriptions/specifications, percentage composition (by weight) of the products to b)Detailed manufacming prOcess along wn鰤 caljustiflcation for wastages claimed盤 45 Name:DOW CHEMICAL ,7 Status: Deferred Lic.No/Date:3010103818 17.08.2016 Strtus: Deferred HQ File 101/87/050/00390/AM17/ RLA File 152/24/040/00034/AM17/ LicoNo/Date:5210042002 [7.08.2016 No.:10/14/87¨ALC12016

) Chemical name, Technical specifications of items proposed to be imporrcd. may be indicated. No.319′ 14r87‐ALC1/2016 Nnme:PIDLITE No/Date:14/87¨ LIMITED 1.12.2016 Fllo File 10807196 1/87/050/00352/AM17/ :03/95/040/00113/AM14/ 18.08.2016 : The Committee considered the case as per agenda and decided issue deficiency the authorisation holder for submission of the following information. and each of the materials required in the manufacturing prooess. )ChemiCal name,Teclnical speciications ofitems proposed to be impomd. りWhether dle scmp generated in the process is being reused or not.r not ale for its non‐ use may be mmished.rthe scmp is being sold,ale sale value/commerciall may be indicated. No.359ノ14r87‐ALC12016 Name:VoK.A. No/Date:14/87‐ YMERS PRIVATE 1/2016 1.12.2016 File 1/87/050/00392/AM17ノ 18.08。2016 勁e CO―ittee considered the case in the meeting and approved n3 8ppmed for the authorisation holder in their Advanced Authorization. ■8y_“墜_製聖eq彎,呻里_S_1■ 「 IFOllCy_11:理型w壼: No.:11ノ14/87‐ALCl′2016 Name:DOW No/Date:14/87¨ 1/2016 ゝTIONAL PRIVA霊 1.12.2016 File 1冨搬lTΨT21 rAM17/ : The Committee considered the case as per agenda and decided issui aenciency J無〕audlorisation holder for submission ofthe fbllowing infomation. ) Technical descriptions/spocifications, percentage composition (by weight) of the products to Detailed manufacturing proc€ss along with technical justification for wastages claimed at 46 lvlaterial balance indicating calculative statement of the requirement of each of item for mufacture of each of exoort oroduct. 101 Itatus: lpproved 102 Status: Deferred HQ Flle 101/87/050/00344/AM17/

Whe■er■e scmp genened h the process is being reused or noto r not the technbal for its non‐ use may be mmished.Ifthe scmp is being sold,■e sale vdue/conlmercidi may be indicated. ) Material balance indicating calculative statement of the requirement of each of ircm for No.:12′ 14/87¨ALClr2016 Name:DOW No/Date:14/87‐ 1/2016 TIONALPWA‐ 1.12.2016 File 10807224 1/87/050/00345/AM17ノ : 19.08。2016 8 The COIImittee considered the case as per agenda and decided issue deiciency letteⅢ )TeChnical descHptions/speciflcations,percentage∞ mpos‖ On oyweightb Ofthe productsto bo ,) Detailed manufacturing proc€ss along with technical justification for wastages claimed at r) chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. If not the technical for its non-use may be furnished. If the scrap is being sold, the sale value/commercial may be indicated. ) Material balance indicating calculative statement ofthe requirement of each of item for No.:13/14787‐ALC120161 Name:DOW No/Date:14/87‐ 2016 ■ONAL PRIVATE 1.12.2016 File ,No/Date:0310807222 1/87/050/00346/AM17/ 19.08.2016 : The Committee considered the case as per agenda and decided issue deficiency ) Detsiled manufacturing process along with technical justification for wastages claimed at each and each ofthe matprials required in the manufacturing proccss. r) chemical name, Technical specifications of items proposed to be imported. ion for its non-use may be furnished. If the scrap is being sold, the sale may be indicated. product. ofeach of smtus: DeFerred lLA Fllo 03/94/040/00446/AM17ノ Status: Deferred 脇穫叩昭 8/AM17 47 / u盛管肥:ll選皓h品

No.:14r14/87‐ALC1/2016 Name:DOW No/Date:14/87¨ 1/2016 、TIONAL PRIVATE 1.12.2016 Flle File ,No/Date:0310807226 :01/87/050/00347/AM17/ AM17/ 19.08。2016 : The Committee considered the caso as per agenda and decided issue deficiency the authorisation holder for submission of tho following information. Whether the scmp generated in the process is being reused or not.r not伍 e technicali for its non-use may be furnished. If the scrap is being sold the sale ue may be indicated. nanufacfure of each of export product. No/Date:14/87‐ 10807223 rcislon : The Committee considered the case as per agenda and aecidea issue aeficienoy Detailed manufacturing prooess along with technical justification for wastages claimed at ge and each of the materials required in the manufacturing proc€ss. chemical name, Technical spocifications of items proposed to be imported. whether the scrap generated in the proc€ss is being reused or not. ff not the Ivlaterial balance indicating calculative statement of the requirement of each of item for urufacture of each of exoort oloduct. rcision : The Committee considered the case as per agenda aoa ary 乍‐ ・ C

Technical descHptions/speciflcatiolls,percentagecompositionttWeighthoftheprOductstobel )Detailed manufacming process dong with"chnbdjustiflcation forwastages clamed tteacl ) Chemical narne, Technioal specifications of items prcposed to be imported. whnerぬe scmp genemed h」b prOcess is behg reused or not.r not ule technicJI for its■on‐use may be mmishedo rthe scmp is being solこdle sale value/comlnerciall may be indicated. ) Ivlaterial balance indicating calculative statement ofthe requirement of each of item for No.:31/11787‐ALCl′2016 Name:RRKABEL No/Date:14/87¨ File Fllo 。No/Date:0310807288 1/87/050/00269/AM17ノ : AM17/ : The Committee considered the case as per agenda and decided issue deficiency ) Detailed manufacturing process along with technical justifisation for wastages claimed at and each ofthe materials required in the manufacturing process. chemical name, Technical specifications of items proposed to be imported. Whether the scrap generated in the process is being reused or not. ff not the for its non-use may be furnished. If the scrap is being sold the sale may be hdicated. No.332′ 11/87‐ALCl12016 Name:RR.KABEL File 10807285 1/87/050/00270/AM17/ 1劇M17/ 8 The COmmittee consi“ red the case tt per agenda and“ cddおsue derlcienりlemri ) Detailed manufacturing process along with technical justification for wastages claimed at each )ChemiCd name,Technical specincttions ofitems proposed to be impomd。 may be hdicated. r) Material balance indicating calculative statement of the requirement of each of item for ofeach ofexport product. Material balance indicating calculative statement of the requirement of each of item for rnufacture of each of exoort oroduct.

No.:5/14/87¨ AL(Clr2016 Nnme:HIGHPOINT No/Date:14/87… PRIVATE 1/2016 1.12.2016 File 10206917 1/87/050/00338/AM17/ : The Committee considered the case as per agenda. Committee decided to defer to examine the request of the firm. No.:49/14r87‐ALC12016

PartyName: SHAKTI Meet No/Date:14ノ87¨ :IAPIF∞DS PRIVATE ALC1/2016 llnnreo ‐ 21.12.2016 鵬 掲 "響 黎岬7暢 職 叩岬7岬″ 10103826 : The Committee considerpd the case as per agenda and decided issue deficiency ) chemical name, Technical specifications of items proposed to be imported. whether the scrap generated in the proc€ss is being reused or not. If not the ification for its non-us€ may be furnished. If the scrap is being sold, the sale may be indicated. ) tvlaterial balancp indicating calculative statpment ofthe requirement of each of item for ofe“h Ofexpo“ product No。841′ 14/87‐ALC12016 Name:MACRO ,YMERSP.LTD. File 1/87/050/00374/AM17ノ 8 The COnlmittee considered the case as per agendao Comlnittee d∝ ided to defer thei to examine the request of the firm. No.:6/14787‐ ALC12016 Nnme:ABDOS No/Date:14/87‐ PRIVATE 1/2016 1.12.2016 ,No/Date:0210206967 lAM17/ 。2016 |IALC1/2016 No/Date:14/87‐ 1.12.2016 The committee considered the case in the meeting and approved rr rpplied for the authorisation holder in their Advanced Authorization.

1151 No.:45714r87‐ ALCl′2016 Name:AIIM UDYOG No/Date:14ノ87¨ 1/2016 11.12.2016 File .No/Date:2210015559 1/87/050/00378/AM17/ AM17/ The Committee considered the case in the meeting and approved as epplied for the authorisation holder in their Advanced Authorization. may take consequentiel action er per Policy / Procedurrs. No.:40/14/87‐ALC12016 Name:MACRO No/Date:14/87‐ yMERS PoLD. 1/2016 1。12.2016 File 1/87/050/00373/AM17/ : The Commilbe considend the case as per agendao Conlmittee decided to defer No.:39′ 14/87¨ALC1201 Name:PLATINIUM No/Date:14/87‐ and recommended as under: No.:16/14/87‐ALC12016: Name:ACG No/Date:14/87‐ ACK PVT LTD 1/2016 1.12.2016 : The Committee considered the case as per agen& and decided issue defioiency ) chemical name, Technical speoifications of items proposed to be imported. Whether the scrap generated in the process is being rpused or not. If not the for ie non-use may be furnished. If the scrap is being sol4 the sale AD STAR BLOCK BOTrOM BAGS MADE FROM PLYPROPLENE take clonsequentlal actlon ar per Policy / Procedures. may be indicated. H4 Status: 亀pproved by Status: Deferred |じ穫∽ 07“岬″ LicoNo/Date:0810138629 )9.09.2016 The committee considered the case in the meeting and decided to approve ihi υ

lvlaterial balance indicating calculative statement ofthe requirement of each of item for of gggh of export, No.:1′ 12/87‐ALC12016 i Name:SONDEX HEAT No/Date:14/87‐ INDIA 1/2016 1.12.2016 H91 Ｆ Ｉ Ｉ Ｉ Ｉ :li「 NG1214/87‐ ALC1/20111燎 薔;ざ ll影1舌1二:[ず RSI 器島児 50Ю "“ /AM爾 1鵬鵬υ∞∞ 2/AM″ | lcet No/Date:14/87‐ 、LC1/2016 1.12.2016 ic.No/Date:0510399926 8.09.2016 Approved Decision: The Committee considered the case in the meeting and decided to eppnove the adhoc lronnr and recommended as under: EXPORT「EM QTY IMPORT「EM QTY XLPE Compound containing lnlnunum 97.85%LLDPE 5,00,000.000 剛 1.LINEAR LOW DENSITY POLYETHYLENE cLDPE) GRANULES 4,99,350 kg 2.SコLANE 7,000 kg 3.DI CIIMYL PEROXIDE OCP) 400 kg RA may take consequentlal action as pGr Pollcy / proccdures. 52 __Generai n『FAなi胤 ,19ra10「F饉れ、ごむ Ψ T堪毛鑑翻態許尋 U～Og Bha品こ・薔1)5sh卜11 : The Committee considered the case and decided to refer to DIpp. : The Committee considered the case and decided to rpferto DIpp.

53 As per the wrltten comments furnlshed by the DIPP vlde thelr letter No. t8.OL,2Ot7, the Committee approved followlng adhoc norms: QTY rcquircd for 1 lg. of erynrt pruduct General Purpose Relevant Rubber / Synthetic Rubber based Rubber Compounded Sheet 2.Synthetic Rubber‐ SSBR 8. Misc. Chemicals: a. Tackfiers / Gum Rosin Note: Therc should be a velue cap up b7o/o of FoB value of erport for Anti Acceleratorr/Retarderr all togethen RA may take consequentiel ection ar per Pollcy / pnocodures. 7

No.:25714r87‐ Name:ZENIⅢ No/Date:14ノ87‐ RUBBER 1/2016 PVT.LTD 1.12.2016 File Ю1/87/0,0/00351/AM17/ 卜 03 Based on the written comments furnished by the DIPP vide their letter No. '12212017-TSW dated lE.0l.20l7,the Committee appnoved following adhoc norms: General Purpose RelevantNatural Rubber/ Synthetic Rubber based Rubber Compounded Sheet There should be a value crp up b7o/o of FoB value of export for Anti AcceleratordRetarderr all togethen RA may take conrequentlel ection as per policy / prccedunes. 5。Anti Oxidant rumanox9 6 PPD) 123

Case No.82/12r87‐

帆C1/2016 PttName:ARGO BIOCHEM PRIVATE LIMITED Ⅵeet No/Date:14/87‐ 4LC1/2016 21.12.2016 St腱由uS8 Approved HQ File :01/87/050/00275/AM17ノ RLA File 103/94/040/00654/AM17ノ LicoNo/Date:03108090 〕3 )8。11.2016 Decision8 The COmmitte cOnsidered the case and decided to approve on repeat bagig ■dhoc Noms)baSed On the decision of the NC Meting No.1ノ87‐ALC1/2016 held on 22.04.2016 and recomlnended as under: EXPORT「EM QTY IMPORT「EM QIIY Xan■an Gum(200 Mesh)。 l kg Xandlan Gum(80 Mesり 1.02 kg RA may take consequentiel acfion ar perpollcy/pnoccdures.

Name:BIIILDMET No/Date:14/87‐ PVTLD。, 1/2016 1.12.2016 Flle ,No/Date:0710110749 1/87/050ノ00335/AM17/ ./24/040/00253/AM17/ The Colnnlittee∞nsidered the case in the meeting and approved as app■ ed for by: the authorisation holder in their Advanced Authorization with 2o/owastage. No.:60714/87‐ALC120161 Name:AAKASH No/Date:14/87‐ ACK PVToLTD。, 1/2016 pl.171291。 Fllo RLA File :5224/040/00057/AM17ノ 1/87/050/00393/AM17/ 14.12.2016 rcision : The Committee considered the case all p"reg Technical descriptiOns/specncations,pe"entage composuOn oweitt oftheprOducts" tage and each of the materials required in the manufacturing proc€ss. r) chemical name, Technical specifications of items proposed to be imported. ) Whether the scrap generated in the process is being reused or not. If not the cation for its non‐ use may be fぼnished.Ifthe scrap is being s01d,the sale value/commerciali may be indicated. ranufacture of each of export product. Meeting ended with a vote Ofthan to the chair. 中ホ中中中中中中中中中 55 | |

Case No.:2/14/87‐ ALCl′2016

Itatus: lpproved 轟

『 亀ごe 蘊緋櫛螺ソ